Bosch PPP6 M9 Series Operating instructions

0-30V Power
Scope
Automotive
Probe
•
•
•
•
•
•
•
•
Probably the most
advanced automotive
probe on the market,
with a huge range of functions
for effective automotive
diagnostics, making short circuits
and bad earths easy to find.
Features a scope function to
visually test component signals,
with the added benefit
of maximum/minimum volts,
frequency and duty cycle displayed.
Allows components to be activated
in situ or prior to installation.
The fly lead allows continuity and
polarity testing with a high-contrast
colour LCD display giving
a 7mm high read-out.
Feature audible and positive/negative
voltage indicator and
two integral work lights.
6mtr Lead connects to the battery
supply and reaches to all areas of the
vehicle. Includes a
cigarette lighter adaptor.
Model No. PP100
List Price £149.95
Seege
pa
5
Laser Wheel Alignment Gauge
Steering Rack Knuckle Tools
l
de
Mo
.
No
l
de
Mo
•
•
•
•
•
•
Optical system uses low radiation laser
beam to indicate toe-in or toe-out.
Single leg configuration and reversible
contact probes allow on-ramp use.
Works on practically all cars and light
commercials with rim
diameters from 200 to 600mm.
Powered by 2 x AA cells and
includes operating instructions.
Model No. GA50
List Price £699.95
•
•
•
.
No
02
40
VS
FREE
FREE
Steering
Rack Knuckle Tool
5pc Prybar/
Heelbar Set
with each
•
•
Model No. VS4000
List Price £24.95
•
Suitable for the fast and easy
removal/installation of the steering knuckle.
Designed to fit over the steering
shaft onto the steering rack.
•
£399.95
£479.94
Price Including VAT
Suitable for the in-situ separation of suspension components
with minimum manual effort and maximum efficiency.
Fully adjustable fulcrum position allows for use in a variety of
positions and caters for left or right handed use.
Model No. VS3815
List Price £154.95
•
•
£59.95
£71.94
•
Price Excluding VAT
Model No
Diameter
List Price
EXC VAT
INC VAT
VS4001
Ø35 - 41mm
£109.95
£49.95
£59.94
VS4002
Ø29 - 34mm
£109.95
£44.95
£53.94
•
•
Suitable for
MacPherson
strut coil springs.
Features a yoke extension
bracket that also allows
use on conical springs.
Supplied with three pairs of
different sized interchangeable
yokes, for a wide range of
vehicle applications and plastic yoke
protectors that protect the
spring coating from damage which can
invalidate the vehicle manufacturer's warranty.
Safety yokes carefully shaped to stop the
spring bowing while under compression.
Model No. RE229
List Price £499.95
Price Including VAT
NEW
Coil Spring Compressor
Kit - 2250kg Capacity
•
•
•
•
•
•
•
•
Model No. S0914
List Price £107.45
£319.95
£383.94
Price Excluding VAT
£94.95
£113.94
Price Including VAT
Camber Castor Kingpin Gauge
•
FREE
Price Excluding VAT
2
•
•
2250kg Maximum
jaw loading.
Supplied with 2 pairs
of drop-forged yokes.
Safety yokes carefully
shaped to prevent coil
spring from bowing.
Suitable for use with air
wrenches.
Wide availability
of standard and
optional yokes.
Model No. RE225
List Price £549.95
•
•
FREE
35pc 1/2”Sq Drive
WallDrive® Socket
Set - Metric
Price Including VAT
2pc Heavy-Duty Coil
Spring Compressor Set
Heavy-duty coil
spring compressor
with hardened steel
body and force screw.
Ensures smooth
compression of spring.
Model No. AK3845
List Price £129.95
Model No. AK20641
List Price £29.95
Professional Coil Spring
Compressor Set
1000kg
Capacity
•
•
•
•
Price Excluding VAT
Suspension Arm Lever
•
01
40
VS
35pc 1/2”
Sq Drive
WallDrive®
Socket Set
Metric
•
•
Model No. S0914
List Price £107.45
•
•
•
£349.95
£419.94
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
•
•
Aluminium gauge bodies with chemically blackened
wheel stud locators.
Measures wheel geometry by attaching calibrated
bubble levels to the wheel studs.
For accurate results these tools should be used with
Model No. GA44 Steering Turntables.
Supplied in a steel case together with
operating instructions.
Model No. GA42
List Price £399.95
£199.95
£239.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Coil Spring Compressor - Air Operated
•
•
•
•
•
•
26pc Bearing & Bush Removal/Installation Kit
1000kg Air operated
unit with safety locking guard.
Supplied with two interchangeable
plastic coated lower yokes
and a suspension strut clamp.
Fits a wide range of spring
configurations and diameters.
Also features a strut locating platform,
for easy movement of the suspension
strut to avoid unnecessary lifting.
Model No. RE300
List Price £795.95
FREE
Suspension
Arm Lever
•
•
•
Model No. VS3815
List Price £154.95
•
•
•
£474.95
£569.94
Price Excluding VAT
•
•
Comprehensive kit for fast and
effective in situ removal/installation
of wheel bearings/suspension
bushes and seals.
Reduces the possibility of damaging
the bearing/suspension housings.
Supplied with four stepped end plates
and four force screws in carry-case.
Plates and sleeves can also be used
in a standard workshop press when
in-situ access isn't possible.
Model No. VS7023
List Price £409.95
Price Including VAT
£279.95
£335.94
Price Excluding VAT
Price Including VAT
Four-Wheel Laser Wheel Aligner
•
Fast, simple and accurate
alignment of both front and rear wheels.
Optimises vehicle performance and set up after installation
or modification of steering or suspension components.
Simple and fast to use, it is ideal for the busy
professional workshop and has a fast return on investment,
potentially adding value to every steering or suspension job.
This fully portable kit is also ideal
for track-day set up for the enthusiast.
Works on practically all cars and light commercials
with rim diameters between 330mm(13") and 560mm(22").
Supplied with steering wheel clamp,
wheel turn plates and wheeled storage rack.
Supplied with comprehensive operating instructions.
Model No. GA70
List Price £1695.95
•
•
•
•
•
•
•
•
FREE
24V 1/2"Sq Drive
Cordless Impact
Wrench 325lb.ft
•
•
Model No. CP2400
List Price £249.95
Calibration Rig for GA70
•
•
•
•
•
Used to check and adjust the
alignment of the lasers on
Model No. GA70
Four-Wheel Laser Aligner.
This unit will allow workshops
to check and adjust in-house.
Laser heads secure to the rig
and rest on the bobbins that
contact the vehicle’s wheel rim.
Model No. GA70CR
List Price £399.95
£299.95
£359.94
£1119.95
£1343.94
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Price Including VAT
Promotion Code: VST12.06
Prices exclude VAT unless stated otherwise
3
Hydraulic HGV Ball
Joint Separator
•
•
•
•
•
Front Control Arm Bush Removal/
Installation Tool
BMW Mini
NEW
Forged steel body ball joint splitter
suitable for light
commercial vehicles.
Specially designed to be
operated manually or
by 1.5tonne
hydraulic ram
supplied.
Features a
step down
thread adaptor
that allows fitting
of the manual thrust
screw.
Model No. VS3811
List Price £94.95
•
•
•
•
Suitable for removal/installation
of the front control arm
suspension bush on
BMW Mini.
Supplied with
instructions
in carry-case.
Model No.
VSE4783
List Price
£169.95
FREE
£59.95
£71.94
Price Excluding VAT
1/2"Sq Drive
Generation Series
Air Ratchet Wrench
Price Including VAT
•
•
Model No. GSA21
List Price £77.95
£109.95
£131.94
Front Suspension Bush
Tool - VAG
Price Excluding VAT
Price Including VAT
BMW Rear Ball Joint Tool
•
•
•
•
•
•
•
Suitable for the
removal/installation
of the rear mounting
bush on the front
lower wish-bone.
Can be used in situ
without removing the
aluminium housing.
Use with 24mm spanner only.
Model No. VSE4781
List Price £139.95
•
•
£79.95
£95.94
•
•
•
•
•
•
Suitable for packing bearings
with an even spread of
grease.
Works on most
tapered roller
bearings.
Suitable for
use with
Sealey and
other best
selling grease
guns.
Max. Cone
Ø:104mm.
Shaft H x Ø:
60 x 11mm.
Model No.
VS7022
List Price
£7.95
£99.95
£119.94
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Universal Bearing
Packer
•
Remove/install press-fit rear suspension
ball joints in situ, on BMW 5 and 7 Series.
Applications: BMW 5 Series E39,
7 Series E38.
Model No. VSE5509
List Price £169.95
Price Including VAT
5pc Ball Joint
Separator Kit
Adjustable Ball Joint
Remover
18 - 22mm
•
£4.95
£5.94
•
Price Excluding VAT
•
•
Interchangeable
shafts for use with
ball pein hammer
or air hammer
with .401" shanks.
Suitable for most
small cars and light
commercials.
Model No. AK273
List Price £35.95
Price Including VAT
Ear-Type CVJ
Boot/Hose
Clip Pliers
•
£19.95
£23.94
Price Excluding VAT
•
•
Price Including VAT
•
•
3pc Strut Nut Tool
Audi, VW
•
•
•
•
Formed steel arms with insulated vinyl handles. Suitable
for ear-type hose clips found on fuel, cooling system and
vacuum hoses.
Also used for securing
CVJ boot clips.
Price Excluding VAT
Model No. VS1633
List Price £12.45
£7.95
£9.54
Price Including VAT
4
•
•
•
Suitable for the removal and
installation of strut nuts
on McPherson struts
fitted to Audi and
VW vehicles.
Model No. SX033
List Price £22.95
£15.95
£19.14
Price Excluding VAT
Price Including VAT
Strut Nut Socket
Audi, VW
•
•
Forged steel body with
chemically blackened
thrust and adjustment
screws for corrosion
resistance.
Fully adjustable.
Jaw Capacity:
18-22mm.
Model No. AK3811
List Price £25.95
£14.95
£17.94
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
•
•
•
Suitable for the removal and installation of top shock
retaining nut.
Location pegs fit into slots cut in the retaining ring and
allow hex key access through the centre for
release/adjustment of the shock.
Use with 22mm
spanner.
Model No. SX028
Price Excluding VAT
List Price £8.95
£5.45
£6.54
Price Including VAT
Promotion Code: VST12.06
40ltr Air Operated
Fuel Drainer
•
•
Power Scope Automotive
Probe
NEW
Fully mobile unit on rigid metal trolley.
Air pump uses regulated (72-100psi)
workshop air supply.
Designed to fully empty both
tank and fuel lines of petrol or diesel.
Includes three fuel line hoses.
40ltr Drain tank built into trolley.
Mandatory equipment for VBRA members.
Model No. TP200
List Price £829.95
•
•
•
•
•
•
•
Probably the most
advanced automotive
probe on the market, with
a huge range of functions
for effective automotive
diagnostics, making short
circuits and bad earths
easy to find.
Features a scope function to
visually test component signals,
with the added benefit of
maximum/minimum volts,
frequency and duty cycle displayed.
Allows components to be activated
in situ or prior to installation.
The fly lead allows continuity and polarity testing with a
high-contrast colour LCD display giving a 7mm high read-out.
Feature audible and positive/negative voltage
indicator and two integral work lights.
Model No. PP100
List Price £149.95
•
•
•
FREE
•
•
•
21pc
Fuel & Air
Conditioning
Disconnection Tool Set
•
•
Model No. VS0457
List Price £91.95
6kg Dry
Powder
Fire
Extinguisher
•
•
Model No.
SDPE06
List Price
£93.95
SCOPE FUNCTION
RESISTANCE FUNCTION
FREE
£499.95
£599.94
Price Excluding VAT
Price Including VAT
Model No. TA330
List Price £799.95
Display: 320 x 240 pixel with LED Backlight
Bandwidth: 20MHz
Sample Rate: Maximum 80MSa/S
Input Impedance: 1MΩ
Maximum Input: 600V
Memory Capacity: 6 Waveforms
Trigger Mode: Auto, Normal, Single
Multimeter Modes:
Voltage DC & AC, Current DC & AC, Resistance,
Capacitance, Continuity, Diode
Battery: 3.7V Lithium Polymer
Operating Time: 3hr with Backlight
PC Compatibility:
Windows 98, ME, 2000, XP, Win7, Vista
1-99%
0-2MΩ
CONTINUITY TEST, AUDIBLE
<50Ω
SCOPE FUNCTION
YES
BACK LIGHT
YES
CIRCUIT BREAKER RESET
YES
£119.95
£143.94
Price Excluding VAT
Price Including VAT
FREE
EOBD Code Reader
Simple to use oscilloscope that allows
observation of constantly varying signals from
vehicle components and sensors. With a
bandwidth of 20MHz the unit is suitable for
detecting CAN signals on modern vehicles.
Functions include date hold, record,
auto-ranging and USB interface for
downloading data to PC. This versatile unit
also has a built in multimeter with large digit
display and bar graph.
•
•
0-10KHz
RESISTANCE
Model No. TA120
List Price £21.95
Hand-Held Automotive Single
Channel Oscilloscope & Multimeter
0-30V
FREQUENCY
DUTY CYCLE
Current
Tester
20A
Standard Fuse
•
•
DC VOLTAGE
•
•
Model No. VS8700
List Price £94.95
Features Voltmeter Function
£549.95
£659.94
Price Excluding VAT
Features Multimeter Function
Price Including VAT
Promotion Code: VST12.06
Prices exclude VAT unless stated otherwise
5
EOBD Code Readers with Vehicle Specifac Applications
Emission
Brakes
Air Bag
A sophisticated and powerful range of OBDII / EOBD based
diagnostic tools takes the guess work out of fault finding on
today’s vehicles, saving the technician valuable time and the
garage owner money. This family of diagnostic tools gives
clear and concise generic DTC definitions, while also providing
manufacturer specific definitions for engine, ABS, air-bag and
transmission. These CAN enabled tools will then enable the
user to extinguish the MIL light, clear any DTCs and reset the
vehicle’s monitors.
Model No.VS863
Model No.VS864
Coverage:
Coverage:
•
•
•
•
•
•
•
•
Renault (1996-2007)
Citroen (1996-2005)
Peugeot (1996-2005)
List Price £379.95
LIVE
Data
Chrysler (1996-2007)
Vauxhall/Opel (1996-2007)
Ford (1996-2007)
List Price £379.95
Model No.VS865
Coverage:
FREE with each tool
•
•
•
•
•
•
6-24V Auto Probe
with 4.5mtr Cable
•
•
•
•
•
Model No. PP1
List Price £39.95
Reads and clears air bag, ABS and transmission DTCs.
Large back-lit LCD screen.
CAN enabled tool, retrieves generic P0, P2 and P3 and U0 codes for engine
emissions and also picks up manufacturer specific P1, P3 and U1 codes.
Turns off MIL light, clears codes and resets monitors.
Stores freeze frame data for later evaluation and will also display monitor and I/M readiness status.
Reads and displays the live ECU/PCM data stream, plotting selected functions graphically.
Live display of O2 sensor data and has a memory which
enables on and off-line storage and playback of data.
Built-in data library with lookup functions is also included.
Updateable via web-based downloads over the USB cable
included with the scanner and will link with a PC enabling
the print-out of stored data.
Price Excluding VAT
Supplied in storage pouch.
Requires 4 x AA Batteries (included).
•
•
•
•
•
•
£219.95
£263.94
•
•
Price Including VAT
Oil & Service Reset Tool
•
•
•
•
•
•
•
•
•
•
•
•
•
•
FREE
EOBD Code
Reader
•
•
Model No. VS8699
List Price £63.95
Graph live data for easy
interpretation.
Save data for later
referal.
Read and clear DTCs and
turn off engine light.
•
£159.95
£191.94
•
•
Retrieves generic (P0, P2, P3
and U10) and manufacturer
specific (P1, P3 and U1)
codes, and pending codes.
Turns off Check Engine
Light (MIL), clears codes
and resets monitors.
On-screen DTC definitions.
Reads live ECU/PCM
data-stream.
Views freeze frame data.
Displays monitor and I/M
readiness status
(emissions).
Retrieves vehicle
information
(VIN, CID and CVN).
Supports CAN (Controller
Area Network) and all
other current
EOBD protocols.
Built in EOBD DTC
lookup library.
Software upgradeable
via internet.
Model No. VS8702
List Price £129.95
Price Excluding VAT
Price Including VAT
6
Live data stream direct
from ECD.
EOBD Code Reader
Designed for resetting the oil service and oil
inspection lights, and for adjusting service interval
data on a wide range of common vehicles.
Resets airbag light on selected vehicles.
Intuitive controls and easy
to follow LCD menu screen.
Supplied with EOBD connector, USB cable and
adaptors for older BMW,
VW and Mercedes vehicles.
Updateable via the internet.
Model No. VS8651
List Price £259.95
•
•
Honda (1996-2006)
Nissan (1996-2006)
Mazda (1996-2006)
Mitsubishi (1996-2006)
Toyota (1996-2006)
List Price £379.95
Prices exclude VAT unless stated otherwise
£69.95
£83.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Ultrasonic Leak Detector
EOBD Code Reader
•
Applications: All 1996 and later
EOBD compliant vehicles.
Retrieves generic (P0, P2, P3 and U0) and
manufacturer specific (P1, P3 and U1) codes.
Turns off Check Engine Light (MIL), clears codes
and resets monitors.
On-screen DTC definitions.
Views freeze frame data.
Displays monitor and I/M readiness status
(emissions).
Identifies pending codes.
Retrieves vehicle information (VIN, CID and CVN).
Supports CAN (Controller Area Network)
and all other current
EOBD protocols.
Built-in DTC library.
Model No. VS8700
List Price £94.95
•
•
•
•
•
•
•
•
•
•
•
£49.95
£59.94
Price Excluding VAT
Price Including VAT
•
•
EOBD Code Reader
•
•
The VS8699 works with all 1996 and later
OBDII / EOBD compliant vehicles.
This easy to use tool will retrieve/clear
generic and manufacturer Diagnostic
Trouble Codes (DTC).
Supplied with code reference manual.
Model No. VS8699
List Price £63.95
•
•
•
•
Quick and simple location of air, water, dust leaks.
Place the transmitter in the vehicle
and close the doors and windows.
Trace the detector around outside of the screen,
windows and door seals to locate the leak.
Includes adjustable headphone for detector.
Transmitter and detector
powered by 9V Lithium batteries.
Supplied in foam lined carry-case.
Model No. PP4
List Price £79.95
•
•
•
•
•
FREE
£49.95
£59.94
6-24V Circuit Tester
•
•
Price Excluding VAT
Model No. AK4008
List Price £7.75
Price Including VAT
£29.95
£35.94
Lambda Sensor Tester/Simulator
Price Excluding VAT
•
•
Price Including VAT
Tests Zirconia and Titania lambda sensors and ECU.
Suitable for 1, 2, 3 and 4 wire sensors,
heated and unheated.
LED display shows crossover signal
from sensor.
Simulates rich or lean mixture
signals to check ECU response.
Insulation-piercing
clip for quick and easy
connection plus display to
confirm wire identity.
Features a low battery indicator
and powered by 9V battery
(supplied).
Model No. VS925
List Price £99.95
•
11pc Noid Light/IAC Test Set
•
•
Locate and isolate
ECU signal faults fast.
Simply disconnect
harness and plug in
light to see if
component is
receiving a signal.
Noid and idle air
control valve
indicator lights
test for control
signal from ECU.
1.3mtr Fibre optic cable.
Model No. VS2131
List Price £58.95
•
•
•
•
•
•
•
•
•
FREE
£31.95
£38.34
3-48V Circuit Tester
•
•
Price Excluding VAT
Model No. AK4051
List Price £13.95
Price Including VAT
Diagnostic Socket Memory Safe EOBD
•
•
•
•
Polarity
protected
unit attaches
to a 12V slave
battery and
provides power via
the EOBD socket to
on-board electronics whilst
vehicle’s own battery is
disconnected.
Features surge protection and
three LEDs to indicate
power supply status.
Model No. VS2072
List Price £29.95
Promotion Code: VST12.06
FREE
£69.95
£83.94
5pc Oxygen Sensor
& Thread Chaser Set
•
•
Price Excluding VAT
Model No. SX0320
List Price £39.95
3mtr 3-Core Test
Lead Set
Price Including VAT
Test Lead Set
5 Pairs
900mm
FREE
LED
Circuit Tester
•
•
Model No. AK407
List Price £16.95
£21.95
£26.34
Price Excluding VAT
Price Including VAT
•
•
•
•
•
Three test leads with shrouded crocodile clips
at each end.
Convenient integral reel prevents tangles
and makes storage easy.
Maximum
Length:
3mtr.
Price Excluding VAT
Model No.
VS220
List Price
Price Including VAT
£19.45
£8.95
£10.74
Prices exclude VAT unless stated otherwise
•
•
•
•
•
Five pairs of cables,
colour-coded red, black, blue,
orange and yellow.
1.3mm2 Cable with shrouded crocodile clips at each end.
Use as extensions to multimeter leads, to bridge
suspected open-circuit
cables and as
temporary wiring.
Price Excluding VAT
Model No. VS221
List Price £23.95
£14.95
£17.94
Price Including VAT
7
Digital Automotive Analyser
12 Function with IC
•
Relay Circuit Diagnostic
Tester
NEW
Combination digital/bar-graph display gives accurate
indication of component outputs.
Features auto-ranging, and data
hold functions with overload
protection on all ranges.
Supplied with inductive
coupler, test probes and
thermocouple.
Model No. TA302
List Price £99.95
•
•
•
•
FREE
£69.95
£83.94
6-24V Auto Probe
with 4.5mtr Cable
•
•
Price Excluding VAT
Model No. PP1
List Price £39.95
Price Including VAT
Digital Automotive Analyser
14 Function with IC
•
•
Combination digital/bar-graph display gives accurate
indication of component outputs.
Features auto-ranging, and data
hold functions with overload
protection on all ranges.
Includes relative functions including
Min./Max. and Peak Hold.
Supplied with inductive coupler,
test probes and thermocouple.
Model No. TA303
List Price £159.95
•
•
•
•
•
•
•
•
•
•
FREE
£109.95
£131.94
6-24V Auto Probe
with 4.5mtr Cable
•
•
•
Fast, accurate and safe relay
circuit tester that tests the supply,
earth and trigger wires
within the automotive circuit.
Simply remove the relay and install the
corresponding dummy relay.
Includes a universal fly lead
for non standard
relay pin configurations.
Earth, supply and trigger terminals are
displayed as green or red LEDs.
The tester can also be
used to power components
by simulating the relay
in the on/off positions
using the test button.
Model No. TA130
List Price £179.95
£129.95
£155.94
Price Excluding VAT
Model No. PP1
List Price £39.95
Price Excluding VAT
Price Including VAT
Digital Automotive Analyser
15 Function with IC/IR
IR & RF Key Fob Tester
•
•
•
Combination digital/bar-graph display gives accurate
indication of component outputs.
Features auto-ranging, and data hold functions
with overload protection on all ranges.
Includes relative functions
including Min./Max. and Peak Hold.
Supplied with inductive coupler,
IR thermometer, test probes
and thermocouple in carry-case.
Model No. TA304
List Price £209.95
•
•
•
•
•
FREE
•
•
Price Excluding VAT
Model No. PP1
List Price £39.95
Price Including VAT
Heavy-Duty Circuit
Tester
FREE
Retracting Razor
Scraper
•
•
•
•
195mm Insulated probe with
pointed tip.
Supplied with 3mtr coiled cable
and crocodile earth clamp.
Model No. AK4005
List Price £19.95
£12.45
£14.94
Price Excluding VAT
•
•
Model No. AK867
List Price £3.25
Price Including VAT
Detects radio frequency and/or infrared
emission from key fobs and remote controls.
Suitable for a wide variety of vehicle and
electronic/electrical applications.
Detects new BMW frequencies.
Powered by 9V battery (not included).
Model No. VS921
List Price £39.95
•
•
•
•
£144.95
£173.94
6-24V Auto Probe
with 4.5mtr Cable
8
Price Including VAT
FREE
£24.95
£29.94
6-24V Circuit Tester
•
•
Price Excluding VAT
Model No. AK4008
List Price £7.75
Price Including VAT
Circuit Tester
LED Circuit Tester
•
•
•
•
•
•
•
•
•
•
Suitable for testing 6, 12 and 24V DC circuitry.
Insulated, pointed probe tests through wire insulation.
Supplied with 1.5mtr cable and
crocodile earth clamp.
Model No. AK402
List Price £13.95
£8.95
£10.74
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
Suitable for 6, 12, 24 and 48V AC and DC circuits.
LED array indicates polarity and voltage range.
Supplied with 850mm cable and crocodile earth clamp.
Model No. AK407
List Price £16.95
£8.95
£10.74
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Video Borescope
Ø5.5mm Probe
13-Pin Towing Socket Tester 12V
VOSA Approved
•
•
Professional
borescope with
Ø5.5 x 1000mm
probe.
CMOS camera
with adjustable
4 x LED array
allows fine control
of light output and
clearer pictures.
SD Memory slot, USB
and AV out slots.
Powered by internal
Lithium-ion battery.
Supplied in foam-lined carry-case.
Model No. VS8197
List Price £499.95
•
•
•
•
•
•
FREE
Digital Automotive
Analyser with IC
•
•
Model No. TA302
List Price £99.95
•
•
•
•
•
•
•
FREE
6-24V Auto Probe
with 4.5mtr Cable
•
•
Model No. PP1
List Price £39.95
Corrosion Assessment
Hammer - VOSA Approved
Price Excluding VAT
•
•
Price Including VAT
Model No. H1MOT
List Price £16.95
•
•
•
•
•
•
•
£99.95
£119.94
Price Excluding VAT
Price Including VAT
Micro Butane Soldering Torch
•
•
•
•
•
•
•
•
•
Suitable for heating, soldering and shrinking plus
many other applications.
Produces temperature of approximately 1300°C.
Refillable unit powered by butane (lighter fluid).
Piezoelectric start and anti-flare device
enables quick and clean operation.
Model No. AK2947
List Price £19.95
£11.95
£14.34
£12.95
£15.54
Price Excluding VAT
Price Excluding VAT
Price Including VAT
8 Function Digital Multimeter
with Thermocouple
•
•
•
•
•
•
Heavy-duty general purpose
multimeter with clear and
easy-to-read LCD display.
Features data hold function,
temperature probe
and diode test facility.
Housed in rugged rubber
boot with integral stand.
Measures: AC and DC Voltage,
DC Current, Resistance,
Temperature, Audible Continuity,
Diode/Transistor Verification Mode.
Model No. MM20
List Price £29.95
£19.95
£23.94
Price Including VAT
10pc Micro Butane
Torch Kit
•
•
•
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Price Including VAT
£32.95
£39.54
Price Excluding VAT
7 Function Digital
Multimeter
•
Price Excluding VAT
Find short and open circuits fast and easily.
Simply attach the sender unit to the circuit
and follow the wires using the detector.
Suitable for all DC circuits up to 42V.
Supplied in carry-case.
Powered by two 9V batteries.
Model No. FF400
List Price £52.95
Price Including VAT
High quality general purpose multimeter
with a large (46 x 25mm), clear and
easy-to-read LCD display.
Measures: AC and DC Voltage, DC Current
Resistance Audible Continuity
Diode/Transistor Verification Model
Model No. MM19
List Price £19.95
£54.95
£65.94
6-42V Open & Short
DC Circuit Detector
Six-channel microphone
selector to monitor
individual sources
even on the move.
Quickly identify
source of noise,
harshness
or vibration.
Model No.
VS007
List Price
£199.95
•
FREE
£299.95
£359.94
Electronic Stethoscope Kit
•
VOSA Approved for use
in MOT testing stations
on vehicle classes 4,
5 and 7. Quick and
simple test of 12V
13-pin Euro-type
sockets fitted to the
rear of the vehicle.
Supplied with 4.9mtr
cable.
Also tests the 12V
continuous live feed,
12V ignition live feed and
the reversing lights.
Includes 13 to 7 pin adaptor for
testing older wiring systems.
Model No. TST22
List Price £99.95
•
•
•
Portable and
lightweight, suitable
for heating, soldering
and shrinking
plus many other
applications.
Powered by Butane (lighter fluid).
Piezoelectric start and anti-flare
device enable quick and clean operation.
Supplied in storage case.
Model No. AK2953
List Price £55.95
Prices exclude VAT unless stated otherwise
£36.95
£44.34
Price Excluding VAT
Price Including VAT
9
12V Digital Battery Tester
with CCA Setting
•
•
12V Digital Battery
Tester
Can be set to specific battery CCA* rating.
Applies appropriate load
across terminals and reads
voltage performance.
Will also check charging
voltage and starter
motor circuit.
*CCA - Cold
Cranking Amps.
Model No. BT91D
List Price £74.95
•
•
•
•
FREE
Battery Fluid Tester
Tube Type
•
•
Model No. AK414
List Price £8.45
•
•
•
£55.95
£67.14
Price Excluding VAT
•
•
•
•
Utilises low current
draw technology
to evaluate
condition of SLI,
VRLA, AGM and
Gel batteries.
Simple, fast and accurate
evaluation of battery condition.
Just key in the battery rating from
the top of the battery.
Results displayed on LED control panel.
No internal battery and will test batteries
with a residual charge of just 7V.
Model No. BT101
List Price £74.95
£55.95
£67.14
Price Excluding VAT
Price Including VAT
Price Including VAT
338pc Electrical Connector Kit
6/12/24V Compact Auto Digital
Battery Charger - 7-Cycle
•
•
•
•
•
•
Fully automatic 7-step switch
mode charger and maintainer.
Designed for charging a variety of SLA
batteries including Lead/Calcium and
Silver Calcium (10-50Ah/6V &
12V, 5-25Ah/24V).
Charger senses battery voltage
from 6V through 12V to 24V
and the operator just selects
the battery type
(SLA, AGM/VRLA, PbCa).
LCD display indicates the
current charging or
maintenance phase.
Model No. SMC03
List Price £89.95
•
•
•
Assorted kit of the most common
sizes of insulated terminals and cable
management requisites.
Model No. AK8806
List Price £21.95
£13.95
£16.74
Price Excluding VAT
Price Including VAT
£59.95
£71.94
Price Excluding VAT
Price Including VAT
Automotive Mini Fuses
Battery
Post &
Terminal Cleaner
•
•
•
Wire brushes remove
corrosion build-up on
battery posts and
terminals for improved
electrical contact.
Model No. AK417
List Price £4.45
•
•
Automotive MINI type blade fuse pack.
Packs of 10.
Model No
BCF1002A
BCF1003A
BCF1004A
BCF1005A
BCF10075A
BCF10010A
BCF10015A
BCF10020A
BCF10025A
BCF10030A
£2.48
£2.88
Price Excluding VAT
Price Including VAT
Amp
2Amp
3Amp
4Amp
5Amp
75Amp
10Amp
15Amp
20Amp
25Amp
30Amp
List Price
£1.85
£1.85
£1.85
£1.85
£1.85
£1.85
£1.85
£1.85
£1.85
£1.85
Per Pack
•
•
•
•
Model No
BCF1203A
BCF1205A
BCF12075A
BCF12010A
BCF12015A
BCF12020A
BCF12030A
List Price
£1.95
£1.95
£1.95
£1.95
£1.95
£1.95
£1.95
Price Excluding VAT
Price Including VAT
£4.95
£5.94
Amp
3Amp
5Amp
75Amp
10Amp
15Amp
20Amp
30Amp
£0.95
£1.14
Price Excluding VAT
Removes heavy corrosion build-up on
battery posts and terminals for improved
electrical contact.
Features clamp reamer and terminal scrapers.
Model No. AK418
List Price £8.45
Automotive Standard type blade fuse pack.
Packs of 10.
Per Pack
£0.85
£1.02
4-Way Battery Post &
Terminal Cleaner
Automotive Standard Fuses
•
•
Price Including VAT
Price Excluding VAT
Automotive Tell-Tale Fuses
Price Including VAT
Battery Terminal Puller
•
•
•
•
Mini puller with
spring loaded
jaws designed for removal
of corroded battery
clamps from terminals.
Suitable also for removal
of small gears, pulleys and bearings.
Model No. AK419
List Price £7.45
£4.45
£5.34
Price Excluding VAT
Price Including VAT
10
•
•
Automotive Tell-Tale type blade fuse pack.
Packs of 7.
Model No
BCF425A
BCF4210A
BCF4215A
BCF4220A
BCF4225A
BCF4230A
Amp
5Amp
10Amp
15Amp
20Amp
25Amp
30Amp
Per Pack
£0.95
£1.14
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
List Price
£3.45
£3.45
£3.45
£3.45
£3.45
£3.45
Automotive Maxi Fuses
•
•
Automotive Maxi type blade fuse pack.
Packs of 6.
Model No
BCF4820A
BCF4830A
BCF4840A
BCF4850A
BCF4860A
BCF4870A
BCF4880A
BCF48100A
Amp
20Amp
30Amp
40Amp
50Amp
60Amp
70Amp
80Amp
100Amp
List Price
£6.95
£6.95
£6.95
£6.95
£6.95
£6.95
£6.95
£6.95
Per Pack
£1.15
£1.38
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Radiator Pressure
Test Kit
•
Antifreeze Testers - Temperature Compensate
Updated kit which includes
two new caps suitable for
newer Ford and Vauxhall/
Opel vehicles.
Aluminium radiator header tank
caps have quick release
fittings.
Heavy-duty pump unit
features smooth action
and large, easy-to-read, scale.
Long hose aids use of the gauge
and quick release is fitted with
pressure release valve.
Model No. VS006
List Price £289.95
•
•
•
•
•
el
d
Mo
.
No
)
20
41
AK
NEW
(
el
od
1)
12
K4
A
o.
N
(M
FREE
•
•
9pc Hose Clip
Removal
Tool Set
Tests antifreeze mixtures.
Features a temperature compensation rotor that automatically adjusts the reading
regardless of the coolant temperature.
Freeze protection level is indicated on the scale in degrees Celsius.
•
£164.95
£197.94
Model No
Type
List Price
EXC VAT
INC VAT
VS4120
Ethylene Glycol
£21.95
£14.95
£17.94
VS4121
Propylene Glycol
£21.95
£14.95
£17.94
Price Excluding VAT
•
•
Model No. VS1662
List Price £124.95
Price Including VAT
9pc Hose Clip Removal
Tool Set
•
Radiator Fin
Straightener
All the hose clip tools you are
likely to need in one case.
Comprehensive set features
heavy-duty construction with
ratchet locking mechanism on
most pliers.
Vinyl dipped handles.
Model No. VS1662
List Price £124.95
•
•
•
•
•
Specially designed for
straightening the
delicate fins found on
automotive radiators, air
conditioning condensers,
oil coolers and intercooler
grills ensuring optimum
performance.
Allows removal of any
small debris build up that
can gather between the fins.
Six different comb sizes.
Also suitable for domestic
and industrial air conditioning
and heat exchange applications.
Model No. VS0472
List Price £7.95
•
•
•
FREE
£65.95
£79.14
17ltr Antifreeze/
Fluid Drain Pan
•
•
•
•
Price Excluding VAT
Model No. DRP04
List Price £25.95
NEW
£4.45
£5.34
Price Excluding VAT
Price Including VAT
Price Including VAT
Remote Action Hose
Clip Tool
Water Pump Pliers
•
8)
o.
lN
de
o
(M
6
K3
Long reach tool designed for awkwardly
positioned tag-type hose clips.
Flexible cable and compact head help
operation in confined spaces.
Features ratchet action and vinyl dipped
handles for comfort and close control.
Model No. VS1663
List Price £46.95
•
A
•
•
•
el
od
.
No
FREE
9)
36
AK
8ltr Oil/Fluid
Drain Pan
(M
•
•
Model No. DRP01
List Price £8.45
£22.95
£27.54
Price Excluding VAT
Price Including VAT
el
od
.
No
)
70
36
AK
(M
3pc Composite Hose
Pinch Tool Set
•
•
•
•
•
Chrome Vanadium steel.
Drop-forged, heat treated.
Groove joint, adjustable head.
Model No
Length
List Price
EXC VAT
AK368
250mm
£9.95
£5.45
£6.54
AK369
300mm
£11.95
£6.45
£7.74
AK370
400mm
£24.95
£14.95
£17.94
Promotion Code: VST12.06
INC VAT
•
•
•
•
Manufactured from heat
resistant nylon.
Rounded jaw edges prevent
damage to internal hose
reinforcement.
Features locking mechanism
for simple one-handed use.
Suitable for brake, coolant,
fuel and vacuum hoses.
Model No. VS0300
List Price £29.95
Prices exclude VAT unless stated otherwise
£12.95
£15.54
Price Excluding VAT
Price Including VAT
11
Bosch/Delphi Diesel Injector Puller
•
12pc Fuel Line Clamp &
Stopper Kit
Suitable for the removal of stubborn Bosch/Delphi
diesel injectors.
Set includes two adaptors for different removal methods.
The first screws onto the injector cap and the
second locates internally inside the
injector allowing extra force
to be used.
Features a flexible joint allowing
the slide hammer to be used
in restricted areas.
Model No. VS2049
List Price £129.95
•
•
•
•
•
FREE
20pc Cleaning
Brush Set
•
•
Model No. VS1800
List Price £35.95
ARRIVING
JULY
•
•
£79.95
£95.94
Price Excluding VAT
•
Price Including VAT
•
•
Diesel Injector Flow Test Kit
Common Rail
•
•
•
FREE
Digital Multimeter
with Thermocouple
•
•
Model No. MM20
List Price £29.95
•
•
•
FREE
3-48V Circuit
Tester
•
•
Model No. AK4051
List Price £13.95
•
•
£59.95
£71.94
Price Excluding VAT
•
•
Suitable for the removal and
installation of the diesel injection
nozzle on Man, Mercedes-Benz
and Scania commercial
vehicles.
Specially designed
with window,
toothed end and
M14 pulling force
screw.
Model No. SX0411
List Price £32.45
Price Including VAT
Fuel Filter Cap
Removal Tool
•
£32.95
£39.54
Price Excluding VAT
Price Including VAT
•
•
Specialist socket required for the
removal of diesel fuel filter fitted to
2.0, 2.2 HDi engines found in some
Citroen, Ford, Land Rover, Mitsubishi
and Volvo vehicles.
Model No. VS6426
List Price £15.95
•
£26.95
£32.34
Price Excluding VAT
•
•
•
•
Designed to remove the
fuel filter on Vauxhall/Opel
vehicles fitted with
1.9CDTi engines.
Also fits some Alfa
Romeo, Fiat and Saab
1.9JTD/TD vehicles.
Filter housing fits into the
plastic holder using a
vice, so the key can be
used to unscrew the
housing cap without
causing damage.
Model No. VS2065
List Price £79.95
Price Including VAT
12
NEW
JULY
•
•
•
Price Excluding VAT
ARRIVING
Fuel Filter Removal Kit
Vauxhall/Opel
•
£19.95
£23.94
Price Including VAT
Diesel Injector Nozzle Puller
Used to remove the injector nozzle,
when servicing/cleaning
diesel injectors.
Compatible with Bosch,
Delphi, Denso and
Siemens injectors.
Model No. VS2063
List Price £42.95
NEW
JULY
Designed to remove the copper injector seal
when it has stuck into the head.
Adjusts to allow seals with 7.5-10mm internal
diameter to be removed.
Simply drop the tool into the hole left
by the injector, tighten the handle and
lift out the seal.
Model No. VS2054
List Price £49.95
•
£49.95
£59.94
ARRIVING
Injector Seal Removal Tool
•
A comprehensive kit designed to stop the flow of fuel from fuel lines after disconnection.
Comprises long reach flexi-hose clamp, fuel pipe
separator, six fuel hose plugs and four fuel supply
adaptor clamps with rubber bungs,
suitable for banjo and metal fuel pipes.
Price Excluding VAT
Compatible with brake, transmission, fuel lines
and other application.
Model No. VS0558
Price Including VAT
List Price £74.95
HGV Injector Nozzle
Socket - Diesel
Designed to measure return fuel flow on
diesel vehicles up to 6 cylinders fitted
with common rail injection system.
Identifies, worn, blocked or
inoperative injectors.
Model No. VS2046
List Price £95.95
•
NEW
£9.95
£11.94
Price Excluding VAT
Price Including VAT
£44.95
£53.94
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
Promotion Code: VST12.06
3pc Oil Filter Wrench Set
Renault
NEW
13pc Oil Filter Cap Wrench
Set - Euro Vehicles
ARRIVING
JULY
•
•
•
•
•
Cap type filter
wrenches for
vehicles fitted
with Renault dCi
engines 1.5, 1.9,
2.2 and 2.5.
Also compatible with
some Nissan and
Vauxhall/Opel vehicles.
Sizes: 27, 76, 96mm.
Model No. VS7001
List Price £27.95
•
Suitable for Euro vehicles Audi, Fiat, Renault, Volvo, VW.
Cap type filter wrenches,
made from 7 and 16 gauge steel,
will withstand up to 85lb.ft of torque.
Use with 3/8" or 1/2"Sq drive wrenches.
Includes adjustable oil filter wrench.
Model No. VS7004
List Price £75.95
•
•
•
•
•
£17.95
£21.54
Price Excluding VAT
FREE
Price Including VAT
Ø74mm Oil Filter Cap
Wrench 14 Flutes
6pc Double End
Drain Key Set
NEW
•
•
Model No. AK659
List Price £20.45
£45.95
£55.14
Price Excluding VAT
Price Including VAT
ARRIVING
JULY
•
•
•
•
•
•
Oil Filter Chain Wrench 1/2"Sq Drive
135mm Capacity
Cap type filter wrench
prevents damage to
filter housing.
Will withstand up to 85lb.ft
of torque.
Low profile design suitable for
use in confined areas.
Applications: Purlux Grove filters
fitted to Audi, BMW, Citroen, Fiat, Ford,
Lancia, Mazda, Mercedes, Nissan, Peugeot,
Porsche, Renault, Suzuki, Toyota,
Vauxhall/Opel and VW.
Model No. SX226
List Price £15.95
•
•
£9.95
£11.94
•
•
•
Price Excluding VAT
Price Including VAT
o.
64
A
o.
7)
40
K6
od
(M
•
•
Fits wide range of today's vehicles.
Double end carbon steel keys
with satin chrome finish.
Contents: Hex; 5/8", 9,
10, 12, 14, 17mm,
Square; 3/8", 8, 11,
13mm, Tommy Bar.
Model No. AK659
List Price £20.45
lN
e
od
•
(M
•
•
•
•
•
Suitable for removing and installing oil filters as well as many other applications.
Adjustable strap.
Features soft grip handle for added comfort.
Model No
Capacity
List Price
EXC VAT
INC VAT
AK6406
Ø100mm
£9.95
£5.95
£7.14
AK6407
Ø150mm
£12.45
£7.45
£8.94
Oil Filter Strap Wrenches
1/2"Sq Drive
Ø120mm
FREE
100mm Strap
Wrench
•
•
Model No. AK6406
List Price £9.95
£11.45
£13.74
Price Excluding VAT
Price Including VAT
19pc 3/8"Sq Drive Oil
Drain Plug Key Set
)
40
K6
.A
o
lN
Price Excluding VAT
6pc Double End
Drain Key Set
)
06
AK
£4.95
£5.94
Price Including VAT
Strap Wrenches
N
el
Satin finished carbon steel body
with 1/2"Sq drive for use with
ratchet wrench.
May also be used with a
20mm spanner.
Heavy-duty chain.
Model No. AK641
List Price £8.25
e
od
(M
el
od
2)
40
K6
A
o.
N
(M
•
•
•
•
•
Satin finish steel body
with 1/2"Sq drive.
Satin chrome finish socket.
For use with ratchet wrench.
•
Model No
Capacity
List Price
EXC VAT
INC VAT
AK640
Ø120mm
£7.75
£4.45
£5.34
AK6402
Ø150mm
£9.75
£5.95
£7.14
Promotion Code: VST12.06
•
•
Comprehensive
set of Chrome Vanadium
steel keys with tommy bar.
Suitable for sump plugs on
engine, gearbox and back axle.
Contents: Square Male;
7, 8, 10, 11, 12, 13, 14mm, 5/16",
3/8", Square Female; 10mm, Hex; 8,
9, 10, 12, 14, 17, Triangle; 10mm, TRX-Star*;
T45, Tommy Bar 3/8"Sq Drive Slider.
Model No. AK6586
List Price £48.95
Prices exclude VAT unless stated otherwise
£30.95
£37.14
Price Excluding VAT
Price Including VAT
13
Master Compression
Test Kit - Petrol &
Diesel
37pc Bearing & Seal
Installation Kit
•
New lightweight design for
the installation of bearings
without damaging the
bearing or housing.
Contains 3 metal
bearing drift sleeves
and 34 nylon drifts.
Can also be used to
install oil seals.
Fits most sizes
of bearing and
seals found on
modern vehicles.
Model No. VS7024
List Price £249.95
•
•
•
•
•
•
Features 600psi gauge
with large rubber bumper,
straight and right angled
quick connect fittings and
an extensive range of
spark/glow plug and injector
adaptors.
This kit will cover most modern
car, van, truck, bus, agricultural
and marine engines.
See Sealey website for concise
vehicle applications.
Model No. VSE3155
List Price £299.95
•
•
•
•
FREE
•
•
Price Including VAT
NEW
ARRIVING
•
•
Designed to remove AdBlue filter housing
cap on BlueTec engines, fitted to
Mercedes-Benz commercial vehicles.
Model No. SX120
List Price £10.95
•
•
Price Excluding VAT
FREE
Price Including VAT
4pc HT
Tester Set
•
•
6pc Diesel Injector Seat Cleaner Set
•
Used to clean/decarbonise injector
seats when changing injectors.
Helps to avoid blow-back due
to poorly seated injectors.
Model No. VS2055
List Price £119.95
•
•
•
After
Before
•
•
Model No. PP1
List Price £39.95
Model No. VS5261
List Price £17.45
£79.95
£95.94
Price Excluding VAT
Price Including VAT
Fitted with Ø65mm gauge having two scales,
reading from 0-300psi and 0-2000kPa.
Includes quick coupling 150mm rigid stem
with cone-type adaptor and 320mm
flexible adaptor with 14 and 18mm
screw in adaptors.
Model No. CT951
List Price £29.95
•
FREE
Price Including VAT
3pc Petrol Engine Compression
Test Kit
•
6-24V Auto Probe
with 4.5mtr Cable
Price Excluding VAT
Features 300psi gauge with large
rubber bumper. Includes extension for
deep seated plugs and flexible
extension hose.
Suitable for petrol engines with
10, 12, 14 and 18mm spark
plug threads.
Model No. VSE300D
List Price £124.95
•
£6.95
£8.34
Model No. SX0402
List Price £31.95
£189.95
£227.94
6pc Petrol Engine Compression
Tester - Deluxe Kit
•
JULY
•
•
4pc 3/8"Sq Drive
Diesel Glow Plug
Socket Set
Price Excluding VAT
Model No. TM100
List Price £37.45
3/8"Sq Drive Filter Wrench
46mm AdBlue/Mercedes
•
FREE
£149.95
£179.94
Professional Digital
Multimeter
•
•
£49.95
£59.94
FREE
Price Excluding VAT
Spark Plug Installation/
Removal Tool
Price Including VAT
•
•
Model No. VS1591
List Price £12.45
£18.95
£22.74
Price Excluding VAT
Price Including VAT
33pc Glow Plug Thread Repair Set
•
Fast and effective remedy for damage to
cylinder head glow plug threads.
Set includes tools for the precise
insertion of threaded inserts into the
head and features a unique tap
guide system to ensure their
correct alignment.
Includes 4 sizes of threaded
adaptors suitable for common
sizes of glow plug.
Model No. VS311
List Price £173.95
•
•
•
•
8pc Glow Plug Reamer/Base Cleaning Set
•
Quickly removes accumulations of carbon residue
inside the cylinder head assisting the installation
and effective operation of replacement glow plugs.
Includes four ream guides which aid the
centralisation of the Chrome
Vanadium reams.
Suitable for M8, M10 and M12
threaded glow plugs.
Model No. VS312
List Price £169.95
•
•
•
•
FREE
4pc 3/8"Sq Drive
Diesel Glow Plug
Socket Set
•
•
14
Model No. SX0402
List Price £31.95
£119.95
£143.94
Price Excluding VAT
Price Including VAT
FREE
Angular Torque
Gauge
•
•
Model No. VS530
List Price £16.95
Prices exclude VAT unless stated otherwise
£99.95
£119.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
14pc Valve Seat Cutter
•
Features tungsten carbide
cutting blades, expandable
pilots and double end
cutters for increased
application.
Cutter Sizes:
Ø28-37mm
45º & 75º, Ø28-37mm
30º & Ø37-44mm 75º,
Ø37-46mm 45º & 60º,
Ø37-46mm 30º &
Ø44-52mm 75º, Ø46mm
45º & Ø60mm 30º,
Ø52mm 75º &
Ø65mm 60º.
Model No. VS1825
List Price £889.95
•
•
•
•
Technician's
2pc
Valve Grinder Set Straight Edge
Model No. VS1653
List Price £9.95
Model No. VS1481
List Price £61.95
£649.95
£779.94
10pc Valve Seat Cutter
•
•
•
•
•
9pc Gasket Punch Set
ARRIVING
Features tungsten carbide
cutting blades, expandable
pilots and double end cutters
for increased application.
Cutter Sizes: Ø28-37mm 30º,
Ø28-37mm 45º & 75º,
Ø37-44mm 75º,
Ø37-46mm 45º & 60º.
Model No. VS1823
List Price £559.95
•
•
Price Excluding VAT
Price Including VAT
•
Forged Chrome
Vanadium steel
sockets with
extra-long CrV
steel bits.
Sockets heat
treated and chrome
plated for resistance
to corrosion.
Specialised set designed
for the automotive technician.
Contents: Hex; 5, 6, 7, 8, 10, 12mm,
Ribe; M8, M9, M10, M12, M13, M14,
Spline; M8, M10, M12, M14,
TRX-Star*; T40, T45, T50, T55, T60, T70.
Model No. AK2197
List Price £149.95
ARRIVING
JULY
•
•
22pc 1/2"Sq Drive 200mm TRX-Star*/Spline/
Hex/Ribe Socket Bit Set
•
FREE
•
•
NEW
•
Technician's
2pc
Valve Grinder Set Straight Edge
•
•
Model No. VS1481
List Price £61.95
£399.95
£479.94
•
•
•
•
•
NEW
Model No. AK9791
List Price £3.95
£19.95
£23.94
Price Excluding VAT
Price Including VAT
2pc Valve Grinder Set
•
•
•
•
•
Spark Plug Boot Puller Tongs
Fully insulated tongs designed for
removal/installation of spark plug boot.
Reduces risk of electric shock or
burns when checking installation
of plug leads whilst
running engine.
Model No. AK865
List Price £4.45
3pc Miniature
Brush Set
Price Excluding VAT
Price Including VAT
•
Price Including VAT
An interchangeable hollow
punch set capable of punching
holes in gaskets, leather, paper,
plastic, wood sheet and other
soft materials.
Model No. AK708
List Price £32.95
•
•
FREE
Model No. VS1653
List Price £9.95
Price Excluding VAT
JULY
FREE
•
•
£96.95
£116.34
Set of two valve grinders with wooden shafts.
Suitable for grinding-in most engine valves.
Features four sizes of rubber suction cup.
Model No. VS1653
List Price £9.95
£2.45
£2.94
£5.45
£6.54
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Price Including VAT
Glow Plug Puller Set
ARRIVING
NEW
JULY
•
•
A comprehensive set
suitable for removing
stubborn glow plugs.
Ideal for removing plugs
that have been
unscrewed, but seized,
due to residue build up or
where the filament has
been distorted.
Quick and effective
method, saving time and
money.
Model No. VS313
List Price £124.95
•
•
•
•
FREE
20pc Cleaning
Brush Set
•
•
Model No. VS1800
List Price £35.95
Piston Ring Pliers 3/64" to
1/4" Capacity
Installs and removes piston rings
from 3/64" to 1/4".
Vinyl gripped handles with spring
return mechanism.
Model No. VS164
List Price £6.95
•
•
•
£84.95
£101.94
Price Excluding VAT
FREE
13mm Flat Top
Brush
•
•
Model No. VS1802
List Price £3.25
Price Including VAT
Promotion Code: VST12.06
Prices exclude VAT unless stated otherwise
£4.45
£5.34
Price Excluding VAT
Price Including VAT
15
SAC Clutch Alignment
Tool
•
Drain Plug Thread Repair Set
Necessary for pre-tensioning
self adjusting clutches before
removal or installation.
Prevents plate distortion which
may prevent the clutch from
disengaging or cause dragging.
Features a refitting tool, allowing
the clutch adjuster to be wound
back, and six alignment adaptors.
Model No. VS011A
List Price £534.95
•
•
•
•
•
Used to tap the damaged thread
slightly oversize, then fit a new
drain plug and washer (supplied).
Set is suitable for the most popular
threads used on cars and light
commercial vehicles.
Tap Sizes: M13 x 1.5, M15 x 1.5,
M17 x 1.5, M20 x 1.5mm.
Model No. VS660
List Price £69.95
•
•
FREE
•
•
20pc Cleaning
Brush Set
£44.95
£53.94
Price Excluding VAT
Price Including VAT
£369.95
£443.94
534pc Sump Plug & Washer Set
Price Excluding VAT
•
•
Model No. VS1800
List Price £35.95
Price Including VAT
Diesel Injector Extractor
M8, M12, M14
•
•
Assortment of alloy washers
and sump plugs ideal for
everyday use within a busy
workshop.
Model No. VS663
List Price £69.95
•
•
Slide hammer extractor with thread adaptors
to suit Bosch and Lucas diesel injectors.
Supplied in carry-case.
Model No. VS2045
List Price £67.95
•
•
•
FREE
FREE
4pc Mini Hook Set
•
•
120pc Automotive
Fuse Assortment
£39.95
£47.94
Price Excluding VAT
Model No. AK521
List Price £8.45
•
•
Model No. BCF120
List Price £13.95
NEW
£49.95
£59.94
Price Excluding VAT
Price Including VAT
Price Including VAT
7pc Oxygen Sensor
Socket Set
Digital Tachometer
Contact/Non-Contact
•
•
Professional quality laser instrument for
fast and accurate measurement of
rotational speed with or without contact.
Also measures total revolutions, frequency,
surface speed and distance.
Supplied with reflective tape, for non-contact
measurement, and three heads for contact measurement.
Powered by 9V battery (supplied) or 6V DC auxiliary
transformer (not supplied).
Model No. TA050
List Price £99.95
•
•
•
•
•
•
•
•
FREE
FREE
£66.95
£80.34
4pc HT Tester
Set
•
•
•
•
16
Model No. VS1601
List Price £8.95
Model No. VS528
List Price £8.95
Price Excluding VAT
Price Including VAT
20pc Cleaning & Decarbonising
Brush Set
•
•
•
•
•
£39.95
£47.94
Price Including VAT
OHV Valve Spring
Compressor
Compressed Air
Adaptor
Oxygen Sensor Port
Thread Chaser
Price Excluding VAT
Model No. VS5261
List Price £17.45
FREE
Suitable for Titania and
Zirconia oxygen sensors
found on most modern
vehicles.
Windows and slots enable
sockets to be fitted over
wiring harness.
Model No. SX032
List Price £79.95
•
•
Permits valve springs and valve stem
oil seals to be replaced without the
need to remove the cylinder head.
Reversible jaw adaptor and automatic
cam action lock to pre-set spring tension.
Suitable for use on a wide range of
OHV, OHC and CVH engines.
Model No. VS160
List Price £30.95
£16.95
£20.34
Price Excluding VAT
Price Including VAT
•
•
•
•
•
Ideal for cleaning and decarbonising areas with
limited access, especially glow plug and injector
apertures before refitting.
Sizes from Ø9-19mm in brass, nylon and steel.
Features quick-release extension bar.
Model No. VS1800
List Price £35.95
Prices exclude VAT unless stated otherwise
£19.95
£23.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Exhaust Fume Extraction Systems 230V - 370W
•
•
•
•
•
(Model No. EFS101)
(Model No. EFS102)
Model No
Type
Motor
List Price
EFS101
Single Hose
370W -230V 50Hz
£1345.95
£899.95
£1079.94
EFS102
Twin Hose
370W -230V 50Hz
£1795.95
£1199.95
£1439.94
•
•
•
•
•
•
•
FREE
•
•
Model No. VS1641
List Price £13.45
2pc Exhaust Puller
Tool Set
Price Excluding VAT
•
•
Model No. VS1641
List Price £13.45
Price Including VAT
£39.95
£47.94
Price Excluding VAT
Price Including VAT
Exhaust Hanger Removal Pliers
•
Opens exhaust hose clamps quickly and easily.
Ideal for Citroen, Peugeot and Renault exhaust clamps.
Model No. VS1666
List Price £19.95
2pc Exhaust Puller
Tool Set
FREE
£59.95
£71.94
Exhaust & Hose Clamp Pliers
•
•
•
•
INC VAT
Suitable for cutting thin wall
tubing up to 2.5mm thick.
Designed to enable
access where space
is restricted.
Ideal for cutting
stainless steel
exhaust pipes.
Model No. AK6838
List Price £59.95
•
Ideal for fitting
aftermarket
components to
standard exhausts.
Sizes: Small;
30-44mm, Medium;
38-62mm, Large; 54-87mm.
Model No. VS1668
List Price £99.95
EXC VAT
Exhaust Pipe Cutter
3pc Exhaust Pipe
Expander Set
•
Wall mounting electric fan fitted
with heat resistant ducting
and exhaust pipe cone with
exhaust gas analyser port.
Ideal for bikes, cars and
car derived vans.
Requires installation onto
workshop wall and ducting to
expel exhaust gases.
Does not include electrical
switch gear.
Ideal for smaller garages
and workshops where space
is limited.
•
•
•
Enables fast, one-handed, removal of exhaust
brackets from rubber hangers.
Suitable for a wide range of cars and light
commercial vehicles.
Model No. VS1631
List Price £27.95
£15.95
£19.14
£12.95
£15.54
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Price Including VAT
2pc Exhaust Puller Tool Set
•
•
22mm 3/8"Sq Drive Oxygen
Sensor Socket
•
•
•
Suitable for heated and
unheated oxygen sensors.
Model No. SX022
List Price £10.95
•
£6.95
£8.34
Price Excluding VAT
•
•
•
Suitable for deep-seated
and longer type oxygen
sensors found on
modern vehicles.
Cut-out section
Model No. SX0221
List Price £20.95
Price Including VAT
Exhaust Spring Clamp
Removal Tool - VAG
•
•
•
•
£12.95
£15.54
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
£7.95
£9.54
Price Excluding VAT
Price Including VAT
22mm 1/2"Sq Drive Extra-Long
Oxygen Sensor Socket
•
•
•
Invaluable when installing exhaust systems.
T-handled tools allow easy fitting of
exhaust mounts.
One straight and one hooked to suit block
and ring mounts respectively.
Model No. VS1641
List Price £13.45
Robust steel tool for the safe removal and
installation of exhaust-to-manifold spring clamps.
Applications: Audi, Seat, Skoda, VW.
Model No. VS1638
List Price £27.95
£14.95
£17.94
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
17
Diesel Engine Timing Overhaul Kit
Alfa Romeo, Fiat, Ford, Lancia,
Suzuki, Vauxhall/Opel
Chain Drive
NEW
Petrol Engine Setting/Locking Kit
Alfa Romeo, Fiat, Lancia
1.4 MultiAir - Belt Drive
•
•
This range of
Fiat 1.3 16v
diesel engines, used
by a number of vehicle
manufacturers, are all twin
camshaft, common rail
diesels.
The overhaul kit is designed
to minimise the level of
disassembly so the cylinder
head/camshafts can be
removed without removing
the front-end timing cover,
sprockets and timing chain.
Model No.VS5080
List Price £199.95
•
•
•
•
•
£139.95
£167.94
Price Excluding VAT
Price Including VAT
Diesel Engine Setting/Locking Kit - BMW, Land Rover,
Vauxhall/Opel - Chain Drive
•
Kit includes the camshaft setting plate
and crankshaft TDC location pin.
Also provides chain tensioner retaining
pins and injection pump remover.
Applications: BMW M41/M51 Diesel
Engines fitted in BMW 318tds, 325,
525, 725td/tds, Land Rover
Range Rover 2.5DT/SE (94on),
Vauxhall/Opel Omega-B 2.5TD.
Model No. VS4411
List Price £157.95
•
•
•
•
FREE
BMW Diesel 1.8, 2.5tds
Tensioner Lever
•
•
Model No. VS4415
List Price £43.45
•
•
Petrol Engine Twin Vanos Service Kit
BMW M52TU, M54, M56
•
•
•
•
£99.95
£119.94
•
Price Excluding VAT
•
Price Including VAT
£199.95
£239.94
Price Excluding VAT
•
•
•
•
•
Kit covers
timing belt
replacement on
Ford 1.6 Duratec engines
with variable valve timing.
Camshaft, crankshaft and
flywheel pins are also suitable
for many other petrol and diesel
Ford engines.
Model No. VSE5041
List Price £62.95
For use with twin vanos
variable valve/timing
units on six cylinder
BMW engines.
Designed for dismantling/
assembling and timing
of the unit after engine
overhaul/repair work.
Kit includes twin vanos
setting tool, sprocket/chain
assembly fixture and
compressed air connector.
Used in conjunction with Model
No. VS4425 Setting/Locking Tool
Kit for engine timing.
Model No. VSE5906
List Price £124.95
•
•
•
Includes revised design camshaft setting
plate and tensioner locking pin.
This kit covers the complete
range of Ford Duratec
engines 1.25 through
to 2.0 16v in both
belt and chain
drive variants.
Pins also suitable
for some Mazda
vehicles.
Model No. VSE5515
List Price £22.45
Price Excluding VAT
Price Including VAT
£15.95
£19.14
Price Excluding VAT
Price Including VAT
Diesel Engine Setting/
Locking Tool
Kit - Ford 2.0,
2.4 Duratorq
Chain Drive
•
£45.95
£55.14
Price Excluding VAT
•
•
•
Provides timing retention for Ford 2.0
and 2.4 Duratorq chain diesel engines.
Kit comprises Flywheel Locking Pins, Camshaft and
Injection Pump Locking Pins, Tensioner Locking Pin.
Model No. VSE5842
List Price £154.95
Price Including VAT
18
£84.95
£101.94
Petrol Engine Setting/Locking Kit
Ford, Mazda - Belt/Chain Drive
Price Including VAT
Petrol Engine Setting/Locking Kit
Ford 1.6Ti-VCT - Belt Drive
•
NEW
JULY
•
•
Price Excluding VAT
Price Including VAT
•
Suitable for
timing 1.8/2.0
Valvetronic chain
drive petrol engines.
Includes all the tools
to align the twin vanos units.
Model No. VSE5911
List Price £299.95
£79.95
£95.94
ARRIVING
Petrol Engine Setting/Locking Kit - BMW N42/N46
1.6, 1.8, 2.0 - Chain Drive
•
The MultiAir engine
replaces the inlet
camshaft with an
electro/hydraulic
system operating
the inlet valves.
This kit is required
to set the engine
timing when carrying
out belt replacement.
Features a camshaft
setting plate,
crankshaft setting
tool and tensioner
adjuster.
Model No. VS5050
List Price £119.95
NEW
Prices exclude VAT unless stated otherwise
£14.95
£17.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Diesel Engine Setting/Locking Kit - Nissan, Renault,
Vauxhall/Opel 2.0dCi
Chain Drive
•
•
•
•
•
Suitable for setting
and locking 2.0dCi
chain drive engines
fitted to Renault,
Nissan and Vauxhall
with M9R engine codes.
Includes a crankshaft
holding tool.
Supplied in storage case.
Model No. VSE5086
List Price £124.95
Diesel Engine Locking Kit - Nissan, Renault dCi,
Vauxhall/Opel 1.5, 1.9, 2.2,
2.5Di/DTi/CDTi - Belt Drive
•
£79.95
£95.94
Price Excluding VAT
•
•
Essential tools for
timing belt replacement
on a wide range of
Renault, Nissan &
Vauxhall/Opel diesel engines.
Model No. VSE5871
List Price £194.95
£129.95
£155.94
Price Excluding VAT
Price Including VAT
Petrol Engine Timing Kit - Renault 1.4,
1.6, 1.8, 2.0 16v - Belt Drive
•
•
•
•
Suitable for timing
belt replacement
on petrol 1.4, 1.6,
1.8 & 2.0 engines
fitted to Renault vehicles.
Some 1.8 & 2.0 engines
may require associated tool
(VS4923 Camshaft Sprocket
Locking Device) to loosen the
camshaft sprocket bolts.
Model No. VSE5071
List Price £59.95
Diesel Engine Setting/Locking & Injection Pump
Tool Kit - 2.0, 2.2, 2.4 Duratorq
Chain Drive
•
•
£43.95
£52.74
Price Excluding VAT
Price Including VAT
Diesel Engine Setting/Locking Tool
Set - Ford TDCi, Mazda D 1.4,
1.6, PSA HDi
Belt Drive
•
•
•
•
•
Suitable for 1.4 and 1.6 diesel
engines fitted to Ford/PSA
and Mazda vehicles.
Features timing pins
to lock and hold the
camshaft and
crankshaft in the
timed position.
Flywheel locking tool can
also be used for Ford
Mondeo/Transit
vehicles.
Model No.
VSE5846B
List Price £22.95
Price Including VAT
Crankshaft Pulley
Holder - Honda
•
•
•
£16.95
£20.34
•
•
•
•
•
•
Promotion Code: VST12.06
•
Price Including VAT
•
£37.95
£45.54
•
Price Excluding VAT
Price Including VAT
•
•
Pin is screwed into the side of the
engine to lock the crankshaft.
Applications: Zetec/Duratec engines in Fiesta,
Fusion and Focus.
Also suitable for
some Mazda and
Volvo vehicles.
Price Excluding VAT
Model No.
VSE4143.32
List Price £5.95
Price Including VAT
£3.95
£4.74
Diesel Setting/Locking Kit - Saab,
Vauxhall/Opel 1.9CDTi/
TiD - Belt Drive
•
•
Price Including VAT
Price Excluding VAT
Diesel Setting/Locking Kit - Suzuki, Vauxhall/Opel
1.3CDTi/D/DDiS - Chain Drive
Suitable for setting the
camshaft and crankshaft,
on Vauxhall/Opel and
Suzuki chain drive
1.3 diesel engines.
Set also includes a
tensioner locking pin.
Model No. VSE5881
List Price £52.45
Price Excluding VAT
•
£22.95
£27.54
Price Excluding VAT
£106.95
£128.34
Petrol Engine Crankshaft Locking
Pin - Ford, Volvo 1.25,
1.4, 1.6 Belt Drive
Used to counter-hold the
crankshaft pulley when
loosening/tightening the
retaining bolt.
Suitable for most Honda vehicles
fitted with hydraulic PAS.
Use with 1/2"Sq drive
breaker bar.
Model No. VSE5048
List Price £34.95
Price Including VAT
•
Comprehensive kit for
timing 2.0, 2.2 and 2.4
Duratorq chain
driven diesel engines.
Also includes
sprocket retaining plate
and access cover
removal plate, for injection
pump removal/installation.
Model No. VSE5841
List Price £149.95
•
•
Suitable for timing
belt replacement on
Vauxhall/Opel and
Saab vehicles fitted
with 1.9CDTi/TiD engines.
Kit contains camshaft
alignment screws, crankshaft
pulley alignment tool and
tensioner pin.
Model No. VSE5886
List Price £63.95
Prices exclude VAT unless stated otherwise
£44.95
£53.94
Price Excluding VAT
Price Including VAT
19
Petrol Engine Setting/Locking Kit - VAG 1.2 3Cyl
(6v/12v) - Chain Drive
•
Kit contains locking pin
and clamps for the
camshaft, and crankshaft
locking pin for timing 1.2
3-cylinder chain drive engines.
These engines are found in
Seat, Skoda and VW vehicles.
Model No. VSE5921
List Price £66.95
•
•
•
•
£48.95
£58.74
Price Excluding VAT
•
Price Including VAT
•
•
Diesel Setting/Locking Kit - VAG 1.2,
1.4, 1.9, 2.0 - Belt Drive
•
Timing tool kit for
the VAG 2.0TDi
engines in
Audi; A4/A6,
Skoda; Octavia II,
VW; Golf, Golf Plus,
Jetta, Touran.
Set provides essential tools
for setting and locking
the engine.
Model No. VSE2358
List Price £35.45
•
•
•
Diesel/Petrol Camshaft Sprocket
Remover VAG 1.9, 2.4, 2.5,
2.7, 2.8 - Belt Drive
Specially designed to
remove camshaft sprockets
with 5 and 6 spokes from
Audi, Skoda and VW vehicles.
Features ball end thrust screw to
reduce damage to camshaft bolt.
Model No. VSE5959
List Price £69.95
•
£19.95
£23.94
Set contains
three specialised
wrenches and pins.
Required to access the timing belt tensioners fitted
to a wide range of VAG petrol and diesel engines.
Model No. VSE5752
List Price £63.95
•
Price Excluding VAT
9pc Belt Tensioner Set
•
•
•
•
ARRIVING
FREE
•
•
Model No. VS906
List Price £17.95
•
•
•
JULY
FREE
£79.95
£95.94
6-24V Circuit
Tester with Light
Price Excluding VAT
•
•
Price Including VAT
Model No. PP6
List Price £24.95
500mm Impact Bar
•
•
•
FREE
Camshaft Holding/
Rotating Tool
•
•
20
•
Enables fast and simple
removal of crankshaft and
auxiliary pulleys.
Chrome Molybdenum
legs with thin jaws allows
removal of pulleys with
narrow tolerance
between pulley and block.
Model No. PS997
List Price £110.95
•
•
Model No. VS1730
List Price £16.45
Price Excluding VAT
Anodised aluminium chocks
for locking camshaft pulleys
on twin cam engines.
Includes flywheel locking
tools for selected PSA
(Citroen/Peugeot) and Vauxhall/
Opel petrol and diesel engines.
Model No. VSE170
List Price £74.95
14pc Crankshaft Pulley
Removal Tool Set
•
£35.95
£43.14
Price Including VAT
•
NEW
Mini Digital
Thermometer
Price Including VAT
8pc Setting/Locking Tool Kit
Interchangeable auxiliary and timing pulley belt
tensioner wrench kit.
A time saving and effective method
for the professional technician.
Model No. VS789
List Price
£119.95
•
Price Excluding VAT
Tensioner Adjuster Set
VAG
Price Including VAT
•
£47.95
£57.54
•
•
£39.95
£47.94
Price Excluding VAT
Price Including VAT
Specially designed for use where nuts/bolts are
not easily accessible for air impact tools, or air is
not available.
Ideal tool for loosening crankshaft pulley bolts.
Simply fit the required socket, keeping the arm at
a right angle to the shaft for maximum torque,
and strike the top of the tool with a hammer
to shock the nut or bolt loose.
Model No. VS786
List Price £47.95
£69.95
£83.94
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
£26.95
£32.34
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
On-Vehicle Brake Disc Lathe
•
•
•
•
•
•
•
Time and money saver that allows the brake
disc to be refaced whilst still on the vehicle and
mounts directly to the mounting
holes of the brake calliper.
Eliminates disc run-out and compensates
for small inaccuracies in the hubs.
Features a flexible mounting system with a
selection of adaptors for various vehicles.
Automatic setting with cut-out allows
the operator to leave the unit unattended.
See Video tab on website
for full demonstration video.
Model No. VS0299
List Price £6495.95
Hydraulic Brake & Clutch
Bleeding System 230V
•
•
•
•
•
•
•
One-man brake and
clutch bleeding made easy.
Ideal for use on the vehicle lift as unit
maintains system pressure using electric
pump to drive clean hydraulic fluid through a
long high pressure hose to the reservoir enables quick, ‘walk-around’ brake bleeding.
High pressure system feeds fluid at up to
5.8bar making it particularly suitable for
modern brake systems found on many
vehicles including Audi, BMW and Mercedes.
Features thermal control of
pump for long and reliable pump life.
Includes Ø42mm reservoir adaptor and
accepts all manner of brake fluid
canisters up to 10ltr depending
on their shape.
Model No. VS0206
List Price £799.95
FREE
30pc Brake Piston
Wind-Back Tool Kit
•
•
FREE
Replacement Cutting Tips for
Brake Disc Lathe - Pack of 10
•
•
Model No. VS0299R
List Price £179.95
£3995.95
£4795.14
•
•
•
•
£579.95
£695.94
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Pneumatic Vacuum Brake
Bleeder 1ltr
Price Including VAT
Brake & Fuel Pipe
Inspection Tool
The simple way to bleed hydraulic brakes.
No special reservoir caps required.
Uses regular 90psi air supply.
Supplied with complete
operating instructions.
Model No. VS020
List Price £49.95
•
•
Model No. VS0285
List Price £189.95
NEW
PATENTED
ARRIVING
JULY
FREE
Brake Piston Cube
3/8"Sq Drive
•
•
Model No. VS039
List Price £9.95
•
£26.95
£32.34
Price Excluding VAT
Price Including VAT
Electronic Parking Brake Service Tool
•
•
•
•
•
•
Suitable for the safe and professional
replacement of brake pads on vehicles fitted
with an electronic (push-button) parking brake.
Plugs into the vehicles EOBD socket.
Easy to use with only two buttons, the unit
reads and clears EPB fault codes as well as
displaying the status of the braking system.
Unit supplied pre-loaded with software
for Audi; A4, A5, A6, A8, Mercedes;
W211, R230, C219, VW; Passat.
Unit updateable.
Model No. VS8621
List Price £143.95
•
•
•
•
•
Price Excluding VAT
Price Including VAT
PATENTED
•
•
•
•
•
Ingenious patented design maintains
the fluid level in the vehicle's brake
or clutch fluid reservoir during the
bleeding process.
No electricity or compressor
required, ideal for use on a vehicle lift.
Uses the standard 500ml
brake fluid bottle in
which fluid is supplied,
reducing the possibility
of contamination.
Fast, simple to use and
features on/off flow valve.
Model No. VS0209
List Price £29.95
Price Excluding VAT
£19.95
£23.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
£10.95
£13.14
Gravity Brake Bleeder Kit
•
£79.95
£95.94
Specially designed for the removal of corrosion from
brake and fuel pipes for fast and thorough inspection.
Features 12 cleaning edges for different sizes
and types of pipes.
Includes curved cleaning edges for hard to reach areas.
Applications: 3.5mm Citroen; 4, 4.75mm; 3/16" Pipes.
Model No. VS0210
List Price £16.95
Price Including VAT
Prices exclude VAT unless stated otherwise
21
Brake Pipe Bender
Brake Pipe Cutter
NEW
NEW
•
Compact design for bending
automotive brake pipes without
crushing the pipe walls.
Ridged construction makes it
suitable for steel pipes.
Will bend Ø3.5, Ø4.75 (3/16")
and Ø6mm pipe up to 90°.
Model No. VS5055
List Price £24.95
•
•
•
•
•
ARRIVING
FREE
•
•
PATENTED
•
•
£14.95
£17.94
3pc Miniature
Brush Set
Price Excluding VAT
Model No. AK9791
List Price £3.95
FREE
£14.95
£17.94
7mm Angled Head Long
Reach Hex Wrench
Price Including VAT
•
•
4pc Hose Pinch
Tool Set
JULY
Patented design ensures
that the spring mechanism
maintains the correct
cutting pressure
on the pipe at all times.
Features a smooth
screw action and
nickel plated blade
for increased cutting
performance.
Model No. VS0350
List Price £24.95
•
JULY
ARRIVING
Price Excluding VAT
Model No. AK6572
List Price £4.95
Price Including VAT
NEW
3-in-1 Automotive
Brake Pipe
Bender
•
•
•
Light and compact
steel alloy construction
allows easy use where
space is limited.
Rounded jaw edges prevents damage
to internal hose reinforcements.
Suitable for use on fuel, vacuum
and brake hoses.
Model No. VS0301
List Price £19.95
•
•
•
•
•
•
£12.95
£15.54
£15.95
£19.14
Price Excluding VAT
Price Excluding VAT
Price Including VAT
9pc Pipe Flaring Kit
•
Ideal for most automotive applications.
Bends 6mm (1/4"), 8mm (5/16")
and 10mm (3/8") pipe up to 90°.
Model No. AK5055
List Price £25.95
Price Including VAT
Pipe Flaring Tool Kit
Suitable for producing
single or double flares
on copper, brass or
thin-walled aluminium pipe.
Contains: Flare Press,
Retaining Bracket,
Dies - 3/16", 1/4",
5/16", 3/8",
7/16", 1/2", 5/8".
Not suitable
for steel pipe.
Model No. AK505
List Price £21.95
•
•
•
•
FREE
£13.95
£16.74
2pc Hose
Pinch Tool
•
•
Model No. VS037
List Price £11.25
Price Including VAT
11mm Ratcheting
Flare Nut Spanner
•
•
•
•
Manufactured from hardened and tempered Chrome
Vanadium steel with a fully polished
finish for corrosion resistance.
Works on rounded, worn and rusted nuts unlike other
types of flare nut spanner which rely on the points
of the hex being
in good condition.
Model No. VS0342
Price Excluding VAT
List Price £39.95
£24.95
£29.94
Price Including VAT
22
•
Price Excluding VAT
•
•
•
Single and double
flares on copper tubing.
Dies: 3/16", 1/4", 5/16", 3/8", 1/2"
Model No. AK5063
List Price £61.95
£29.95
£35.94
Price Excluding VAT
Price Including VAT
Brake Shoe
Spring Pliers
2pc Hose Pinch Tool
•
•
•
•
•
•
Spring loaded pliers for easy removal of brake shoe arm.
Compresses spring, eliminating pinched fingers
and frees hand for replacing brake shoe lever.
Model No. VS054
List Price £17.95
£9.95
£11.94
•
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
•
•
Alloy body with steel clamp arm.
Rounded jaw edges prevent damage
to internal hose reinforcement.
Suitable for
use on fuel,
vacuum and
Price Excluding VAT
brake hoses.
Model No. VS037
List Price £11.25
Price Including VAT
£6.95
£8.34
Promotion Code: VST12.06
30pc Brake Piston
Wind-Back Tool Kit
Disc Brake Piston Spreader
Pistol Grip
NEW
•
•
•
Applications: Alfa Romeo, Audi,
BMW, Citroen, Fiat, Ford, Honda,
Jaguar, Lancia, Lincoln, Mazda,
Mitsubishi, Nissan, Peugeot, Proton,
Renault, Rover, Saab, Seat, Subaru,
Toyota, Vauxhall/Opel, Volvo, VW.
Model No. VS0285
List Price £189.95
•
•
FREE
£79.95
£95.94
Gravity Brake
Bleeder Kit
Price Including VAT
NEW
Stepped drill allows you to oversize the
hole allowing insert to be fitted.
Kit includes M12 tap, step drill,
insert locator, two washers
with centre roller bearing
and ten replacement inserts
in storage case.
Model No. VS0463
List Price £139.95
•
•
•
•
•
Price Excluding VAT
Model No. VS0209
List Price £29.95
Price Including VAT
11pc Brake
Service Kit
•
Set contains
the majority
of tools required
to carry out
servicing/repair
work on disc and
drum brakes.
Model No. VS0353
List Price £109.95
•
•
ARRIVING
JULY
FREE
£89.95
£107.94
Disc Brake Piston
Spreader Tool
•
•
£24.95
£29.94
Gravity Brake
Bleeder Kit
Price Excluding VAT
Model No. VS0209
List Price £29.95
Brake Calliper Thread
Repair Kit - M12
•
JULY
Designed to fit front brake callipers.
Pistol grip design provides a fast,
no nonsense approach to
pushing the piston back.
Model No. AK7113
List Price £39.95
•
•
FREE
•
•
ARRIVING
Price Excluding VAT
Model No. AK711
List Price £32.95
Price Including VAT
Brake Piston Wind-Back Tool
with Double Adaptor
•
•
•
•
Enables retraction of piston as fitted to Colette type
brake callipers allowing new disc brake pads to
be installed.
Double end tool.
Model No. VS024
Price Excluding VAT
List Price £27.95
£15.95
£19.14
FREE
£59.95
£71.94
Gravity Brake
Bleeder Kit
•
•
Price Excluding VAT
Model No. VS0209
List Price £29.95
Price Including VAT
2pc Calliper Support
Hooks
Price Including VAT
Left-Handed Brake Piston
Wind-Back Tool
•
•
•
•
Left-handed thrust bolt required for
Citroen, Ford and Renault applications.
Helps prevent damage to pistons and seals.
Model No. VS0243
List Price £28.95
FREE
Ethylene Glycol
Antifreeze Tester Disc Type
Disc Brake Piston
Spreader
Tool
•
•
•
•
Chemically blackened
steel spreader plates.
An essential tool for
retracting the brake
piston to allow insertion
of new brake pads.
Model No. AK711
List Price £32.95
•
•
Model No.
AK4120
List Price
£13.45
•
•
•
£17.95
£21.54
Price Excluding VAT
100mm/4" Digital
Brake Disc Calliper
Price Including VAT
FREE
•
•
•
•
•
•
£3.95
£4.74
Price Excluding VAT
Price Including VAT
Hardened and tempered stainless steel gauge.
Metric or Imperial read-out with ‘Hold’ function.
Zero setting control for comparative measurement.
Range: 0-100mm/0-4".
Model No. VS0561
List Price £94.95
FREE
Brake Piston
Cube
•
3/8"Sq
•
Drive
Model No.
VS039
List Price
£9.95
£19.95
£23.94
Price Excluding VAT
Brake Piston
Wind-Back Tool
with Double
Adaptor
•
•
Model No. VS024
List Price £27.95
Price Including VAT
Promotion Code: VST12.06
Used to hold the brake
calliper away from the hub
when replacing brake pads.
Model No. VS0354
List Price £6.45
Prices exclude VAT unless stated otherwise
£54.95
£65.94
Price Excluding VAT
Price Including VAT
23
7pc Mini Automotive Trim
& Upholstery Tool Set
6pc Pick & Hook Set Extra-Long
NEW
•
•
ARRIVING
•
JULY
•
•
•
•
•
•
•
Tools specially
designed to remove
small items of trim.
Manufactured from
nylon to minimise damage.
Compact design allows
use even where space
is limited or where trim is
most fragile.
Model No. RT7KIT
List Price £25.95
£14.95
£17.94
Price Excluding VAT
Price Including VAT
Emergency Car
Opening Kit
Updated comprehensive set of tools for authorised
release and removal of in-car entertainment
units on popular vehicles.
Model No. VS8047
List Price £89.95
•
Designed for the US market,
this kit will open a
comprehensive range of
European and
Japanese cars too.
For distribution to
bona fide vehicle
dealers and
repair centres only.
Model No. EC95
List Price £31.95
•
FREE
6/12/24V DC Long Probe
Heavy-Duty Circuit Tester
•
•
Price Excluding VAT
JULY
46pc Radio Release Tool Kit
•
•
£11.95
£14.34
ARRIVING
Price Including VAT
•
NEW
Six long reach picks with black finished steel shafts.
Contents: Straight, Right Angle, Half-Round,
Swan Neck, 45°/ 90° Tip, 40°/45° Tip.
Suitable for pin/clip picking and the
removal of O-rings and seals.
Model No. AK5215
List Price £19.95
•
•
FREE
Single Head
Suction Gripper
Extended
Razor
Scraper
Model No. AK4005
List Price £19.95
£59.95
£71.94
•
•
•
£19.95
£23.94
Model No.
VS500
List Price
£7.95
Price Excluding VAT
•
Price Excluding VAT
Price Including VAT
Seat Cover
Price Including VAT
Trim Stick
Panel Bag
•
•
•
•
•
•
•
Heavy-duty water resistant seat cover.
Hook-and-loop straps fasten together behind
headrest to secure
in place.
Ideal for protection
Price Excluding VAT
against dirty overalls.
Model No. CSC1
List Price £12.95
Price Including VAT
£7.95
£9.54
4pc Seat
Cover Set
•
•
•
•
Model No. AK9891
List Price £14.95
Suitable for removing plastic interior trim retaining
studs without damaging the trim or the stud.
Manufactured entirely from a composite material.
Dimensions (L x W): 266 x 22mm.
Model No. RTTS
List Price £4.95
•
£2.95
£3.54
•
•
Price Excluding VAT
FREE
Durable air
cushion device with
rigid edges and
fine air control valve.
Suitable for positioning
panels (bonnets + boots)
prior to fitment.
Model No. VS910
List Price £33.95
4pc Mini
Hook Set
•
•
Model No. AK521
List Price £8.95
£22.95
£27.54
Price Excluding VAT
Price Including VAT
Price Including VAT
Trim Clip
Tools
FREE
With RT004
Extended
Razor
Scraper
•
•
(M
od
el
(M
od
el
•
•
•
•
Set includes seat, steering wheel,
floor and gear lever covers.
Ideal for protecting the vehicle's interior from dirt,
grease and oil in a
busy workshop
environment.
Price Excluding VAT
Model No. CSC4
List Price £15.95
£8.45
£10.14
Price Including VAT
24
No
(M
.R
T0
od
el
03
No
)
.R
T0
Model No. VS500
List Price £7.95
No
.R
T0
04
02
)
)
Model No
Description
Length
List Price
EXC VAT
RT002
Standard
250mm
£9.95
£6.45
£7.74
RT003
Long Reach
510mm
£14.95
£9.95
£11.94
RT004
Removal Pliers
240mm
£14.95
£9.95
£11.94
Prices exclude VAT unless stated otherwise
INC VAT
Promotion Code: VST12.06
8pc Wiper Arm
Removal Set
•
•
•
•
•
12pc Airbag Removal
Tool Set
Suitable for the fast and simple
removal of stubborn, corroded
or awkwardly positioned
wiper arms.
Prevents damage
to surrounding
body work and
glass.
Ideal for most
makes and models
of vehicle although
especially suitable for
Audi, BMW, Ford,
Mercedes, Peugeot, Seat,
Skoda, Vauxhall/Opel
and VW.
Model No. VS808
List Price £129.95
•
•
•
•
•
Suitable for the
fast and safe
removal of steering
wheel airbags.
Set includes updated
special tools for a variety
of applications.
Supplied in storage case.
Model No. VS9001
List Price £79.95
£49.95
£59.94
£49.95
£59.94
Wiper Arm
Removal Tool
Washer Jet Tool
•
•
Cast housing with ball-end thrust bolt for the fast
and safe removal of
taper mounted
windscreen
wiper arms.
Model No. VS806
Price Excluding VAT
List Price £15.95
£8.95
£10.74
Hog Ring Pliers
•
•
•
•
•
•
•
•
£4.95
£5.94
•
•
Chrome finish shafts with knurling for fingertip precision.
Suitable for removal of bushings,
cotter-pins, O-rings and seals.
Classic style handle.
Overall
Length: 125mm.
Price Excluding VAT
Model No. AK521
List Price £8.45
£3.95
£4.74
Price Including VAT
Price Including VAT
Plastic Rivet Insertion Tool
•
)
01
el
Model No. AK521
List Price £8.45
4pc Mini Hook Set
Compact, double end tool with pocket clip.
Screwed caps house a pointed scribe for cleaning and
clearing washer jets at one end and finer
probe for adjusting position of jets at the other.
Heavily knurled body
for sure handling.
Overall Length:
104mm
Price Excluding VAT
Model No. AK52206
List Price £8.95
Price Including VAT
d
Mo
•
•
Price Including VAT
Price Including VAT
•
•
4pc Mini Hook Set
Price Excluding VAT
Price Excluding VAT
•
FREE
0
RP
•
•
.H
No
(
•
•
•
•
Suitable for applying plastic rivets found in
automotive applications.
Designed for one-hand operation and one-stroke setting.
Allows access in hard to reach areas not
accessible by conventional lever type tools.
Universal nose piece suitable for all sizes of plastic rivets.
Rivets: 10pc x Ø6.6 x 17.2mm,
10pc x Ø6.3 x 25.2mm, 10pc x Ø5 x 15.8mm,
10pc x Ø5 x 17.2mm.
Model No. RT001
List Price £34.95
FREE
£21.95
£26.34
5pc Trim &
Upholstery Tool Set
Price Excluding VAT
02)
del
(Mo
P0
. HR
•
•
Price Including VAT
Model No. RT/KIT
List Price £22.95
No
Plastic Rivets for Sealey
Model No. RT001
•
•
•
Suitable for installation of upholstery hog rings,
commonly found on vehicle's upholstery.
Cupped and spring loaded jaws hold
hog rings in place during installation.
Features PVC dipped handles for added comfort.
•
Plastic rivets for Sealey Model No. RT001 and
other makes of plastic rivet insertion tools.
Model No
Size
Quantity
List Price
EXC VAT
INC VAT
PR001
Ø6.6 x 17.2mm
50
£10.45
£7.45
£8.94
Model No
Length
List Price
EXC VAT
INC VAT
PR002
Ø6.3 x 25.2mm
50
£10.45
£7.45
£8.94
HRP001
470mm
£19.95
£9.95
£11.94
PR003
Ø5 x 15.8mm
50
£10.45
£7.45
£8.94
HRP002
180mm
£19.95
£9.95
£11.94
PR004
Ø5 x 17.2mm
50
£10.45
£7.45
£8.94
Promotion Code: VST12.06
Prices exclude VAT unless stated otherwise
25
Heavy Lift Suction Cup with
Vacuum Grip Indicator
•
•
Single Head Suction
Gripper
Heavy lift capacity.
Red-line indicator warns
of any vacuum loss.
Release valve lever for quick removal.
Easy attachment on smooth,
non-porous flat surfaces.
Complete corrosion resistant finish.
Cup Ø: 206mm, Maximum Lift
Capacity: 55kg (TUV), 80kg (Rated).
Model No. AK9894
List Price £109.95
•
•
•
•
•
•
ARRIVING
JULY
•
•
FREE
6pc Mini Panel
Removal Set
•
•
£79.95
£95.94
•
•
Price Excluding VAT
Model No. RT6KIT
List Price £29.95
•
•
Ø60mm Rubber suction
grip prevents damage
to surface.
Designed for handling
glass, tiles, plastic and
other non-porous material.
Suction vacuum
controlled by locking handle.
Holds up to 10kg in the
horizontal position.
Model No. AK9990
List Price £9.95
•
•
•
•
•
•
FREE
FREE
£29.95
£35.94
Model No. AK9812
List Price £12.95
•
•
Price Including VAT
•
•
Price Excluding VAT
Model No. WK0400
List Price £10.95
Side Window Holders - Pair
Price Including VAT
•
•
Stainless steel shaft with contoured
T-handle for added grip and comfort.
Designed for feeding/starting wire
through bonding on windscreens.
Model No. WK0511
List Price £9.95
•
£9.95
£11.94
Side Window
Holders - Pair
Price Excluding VAT
T-Handled Wire Starter Tool
330mm Stainless Steel
•
Ø120mm Rubber suction grip
prevents damage to surface.
Designed for handling
glass, tiles, plastic,
sheet metal and other
non-porous materials.
Suction vacuum
controlled by
locking handle.
Will hold up to 25kg in
horizontal position.
Model No. AK9891
List Price £14.95
•
Suction Cup with
Pistol Grip
•
•
Price Excluding VAT
Single Head Suction Gripper
Three Ø120mm rubber suction
grips prevent damage to surface.
Designed for handling material such
as glass, tiles, plastic, sheet metal
and other non-porous materials.
Push-lock levers for easy operation.
Holds up to 60kg in
horizontal position.
Model No. AK9893
List Price £49.95
•
•
£5.95
£7.14
Price Including VAT
•
•
10kg
Price Including VAT
Triple Head Suction Gripper
•
NEW
•
•
Two pairs of suction cups linked with
sheathed, flexible steel cables.
Designed to retain side windows in
closed position while working
around winding mechanism.
Model No. WK0400
List Price £10.95
FREE
4pc Mini
Hook Set
FREE
4pc Mini
Hook Set
•
•
Model No. AK521
List Price £8.45
•
•
£6.45
£7.74
£6.95
£8.34
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Windscreen Installation Tool Kit
Price Including VAT
Bonded Windscreen Removal Tool
•
•
Reinforced composite handles with
heat treated, chromed steel shafts.
Complete tool kit for the
installation of rubbered
screens including
commercial
vehicle
screens.
Model No.
WK2
List Price £41.95
•
•
•
FREE
Retracting Razor
Scraper with Blades
•
•
26
Model No. AK867
List Price £3.25
Model No. AK521
List Price £8.45
•
•
•
Specially shaped blade is suitable for cutting
through bonding resin used
to fix modern windscreens.
Two handed operation permits tool
to be accurately guided whilst
cutting through bond.
Model No. AK420
List Price £16.95
£27.95
£33.54
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
FREE
Retracting Razor
Scraper with Blades
•
•
Model No. AK867
List Price £3.25
£8.95
£10.74
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Mini Tyre Changer
•
•
•
•
•
Suitable for changing tyres with small
rim diameters commonly found on
agricultural, leisure and industrial
vehicles such as ATVs, golf buggies,
mowers, garden tractors and
handling equipment.
Mount directly onto work surface.
Supplied with tyre bar
and alignment cone.
Model No. TC967
List Price £80.95
Digital Tyre Inflator with
Clip-On Connector
•
Calibrated in bar, psi,
kg/cm2 and kPa.
Range: 0-255psi
(0-18bar).
Auto power off
(to preserve
battery life)
and low battery
indicator.
Supplied with 350mm
rubber hose and
clip-on connector.
Model No. SA391
List Price £74.95
•
•
•
•
•
£52.95
£63.54
£49.95
£59.94
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Manual Bead Breaker
•
•
•
•
•
Wheel mounting manual bead breaker.
Suitable for workshop, roadside or
agricultural use on wheels up to 420mm.
Use with ratchet wrench or spanner.
Model No. TC9660
List Price £59.95
Twin Connector Tyre
Pressure Gauge
•
•
•
•
•
£39.95
£47.94
•
•
•
•
Power of a breaker bar
and speed of a wheel brace.
Adjustable lever locks in
three positions - either end
for maximum power and
in the middle for
maximum speed
when spinning
off fixing.
Includes
two Chrome Vanadium
flip sockets to suit
popular wheel nut sizes.
Model No. AK2094
List Price £32.95
£19.95
£23.94
•
•
•
•
•
•
•
•
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
Suitable for use
with impact tools.
Standard 17, 19,
21 and 27mm
sockets.
Model No. SX030
List Price £49.95
£39.95
£47.94
Price Excluding VAT
Professional Tyre Inflator with
Twin Push-On
Connector
£29.95
£35.94
•
Price Excluding VAT
•
•
Price Including VAT
Manufactured to
comply with EU
Directive 86/217.
Fitted with 500mm
rubber hose and
a twin push-on
connector.
Model No. SA931
List Price £68.95
£46.95
£56.34
Price Excluding VAT
Price Including VAT
Tyre Inflator with Clip-On
Connector
Reads up to 99.5psi (7bar)
with ±1.5psi accuracy.
Simple push-button operation
with backlit LCD display.
Auto-power-off after
approximately 85 seconds.
Batteries supplied.
Model No. TSTPG7
List Price £19.95
•
£9.95
£11.94
Composite body
and dial type gauge
with rubber protector.
Fitted with 500mm
rubber hose and
single clip-on
connector.
Model No. SA930
List Price £58.95
Price Including VAT
Tyre Pressure
& Depth Gauge
•
•
•
•
•
4pc 1/2"Sq Drive Alloy Wheel
Impact Socket Set
•
Wheel
Balancing
Weight Pliers
•
•
•
Price Including VAT
Multi-purpose tool.
Designed for the installation
and removal of wheel
balance weights.
Also includes tools for
prising off wheel trims and
preparing wheel
balance weights.
Model No. VS0361
List Price £15.95
•
Price Including VAT
Price Excluding VAT
•
•
Dial type
pressure
gauge with
twin
connector,
Ø58mm
reading to
16bar (220psi).
Metal body, long reach
connector and high range scale.
Compatible with both cars and
commercial vehicles.
Model No. TSTPG34
List Price £17.95
Price Excluding VAT
Price Including VAT
•
Professional
Tyre Inflator
with Clip-On
Connector
£10.95
£13.14
Price Excluding VAT
1/2"Sq Drive High Speed Wheel
Brace with 17 & 19, 21 & 23mm
Sockets
Price Including VAT
£12.45
£14.94
Price Excluding VAT
Price Including VAT
Prices exclude VAT unless stated otherwise
•
•
•
•
•
Die-cast body and dial type
gauge with rubber protector.
Fitted with single clip-on connector.
Range: 0-16bar (0-220psi).
1/4"BSP Air inlet.
Model No. SA924
List Price £26.95
£13.95
£16.74
Price Excluding VAT
Price Including VAT
27
Thread Repair
Master Kit
NEW
Headlamp Beam
Setters
•
•
Suitable for five
common sizes
of thread.
Creates a stronger
internal thread in soft
metals.
Ideal for repairing
damaged or stripped
internal threads.
Protects tapped threads
against wear and damage.
Includes drill bits, thread taps,
insert installation and lug
breaking tools.
Model No. TRMK
List Price £109.95
•
•
•
•
•
•
VOSA Approved for use in
MOT testing stations.
Fixed aiming screen.
Internal analogue LUX
meter for accurate light
intensity measurement.
Suitable for all types of cars
and light commercial vehicles.
Supplied with instructions
and certificate of approval.
•
•
•
•
£69.95
£83.94
Price Excluding VAT
Price Including VAT
42pc Re-Threader
Master Kit - Metric
•
Taps and dies suitable
for chasing out damaged
threads and removal
of nicks and burrs
without undercutting
good threads.
Thread file restores damaged
external threads on any diameter,
right or left hand - just
select correct pitch.
Model No. AK311
List Price £125.95
•
•
•
Model No
£77.95
£93.54
3pc T-Handle Tap
Wrench Set
Price Excluding VAT
Model No. AK9799
List Price £21.95
•
•
without Rails
List Price
EXC VAT
INC VAT
£1095.95
£799.95
£959.94
£899.95
£499.95
£599.94
£1325.95
£945.95 £1135.14
HBS97E
Extension Rail Set for HBS97 Series 1520mm
£214.95
£149.95
£179.94
HBS97R
Rails for Headlamp Beam Setter
£299.95
£219.95
£263.94
Sound Level Meter
•
High quality meter suitable for measurement of
environmental and mechanical noise.
Conforms to IEC61672-1 class 2 for sound meters.
Features min./max. measurements, over and
under range, A and C weighting, fast and slow
response, data hold, record, digital
read-out and bar graph with backlight.
Requires 9V battery (supplied).
Model No. TA060
List Price £139.95
•
•
•
•
•
Taps and dies are suitable for chasing out damaged
threads and removal of nicks and burrs without
undercutting good threads.
Use with standard spanner
and a little light oil.
Model No. AK310
List Price £49.95
•
HBS971
Price Including VAT
15pc Re-Threader Kit - Metric
•
with Rails
HBS97.HGV with Rails & HGV Aiming Screen
FREE
•
•
Description
HBS97
FREE
£99.95
£119.94
Mini Digital
Thermometer
•
•
Price Excluding VAT
Model No. VS906
List Price £17.95
Price Including VAT
FREE
£29.95
£35.94
200mm Tap Wrench
•
•
Price Excluding VAT
Model No. AK727
List Price £7.45
Mechanic's Mat
Set EVA 28mm
•
•
Price Including VAT
•
•
Adjustable Head Prybars
•
•
•
•
•
•
•
Clever design features 180º adjustable head.
Simply push button to adjust head,
then release to lock into position.
Ideal for use in spaces with limited access.
Curved head also allows for delicate use.
Ideal for prising stubborn cylinder
heads from engine blocks.
1)
80
K8
o. A
N
el
od
(M
Quality 28mm EVA mats
ideal for the busy mechanic.
Set comprises full
length and kneeler mats.
For use on workshop floors when working
on wheels, brakes, tyres and exhausts etc.
Sizes: Kneeler 450 x 215 x 28mm,
Full-length 980 x 380 x 28mm.
Model No. VS8571
List Price £38.45
FREE
6-24V Circuit Tester
Price Excluding VAT
•
•
Model No. AK4008
List Price £7.75
Price Including VAT
Corrosion Assessment Hammer
2)
80
K8
o. A
•
•
lN
de
o
(M
£16.95
£20.34
FREE
Extended
Razor Scraper
With each
Prybar
•
•
Model No. VS500
List Price £7.95
Model No
Length
List Price
EXC VAT
INC VAT
AK8801
250mm
£23.95
£15.95
£19.14
AK8802
380mm
£29.95
£18.95
£22.74
•
•
Aluminium shaft with composite head.
Suitable for pre-test inspection of
bodywork and detection of structural corrosion.
Model No. H1CAH
List Price £14.45
£8.95
£10.74
Price Excluding VAT
28
Prices exclude VAT unless stated otherwise
Price Including VAT
Promotion Code: VST12.06
Twin-Leg Reversible Pullers
25pc Hydraulic Puller Set
•
•
Forged steel bearing separator.
10tonne Ram with enough force to remove
most stubborn bearings,
pulleys and shafts.
Contents: 10tonne Hydraulic Ram,
100mm Leg; 3pc, 150mm Leg; 3pc, 200mm
Leg; 3pc, Twin Head, Triple Head, Extension
Rod; 25 x 50mm x 1pc, 25 x 100mm x 1pc,
Main Rod; 200mm x 4pc, Beam, Separator
75-105mm, Bolt 5/8", Ram Service Kit, Ram Nut.
Model No. PS982
List Price £299.95
•
•
•
FREE
£174.95
£209.94
Price Excluding VAT
4pc Prybar Set
•
•
(Model No. SGP26
Illustrated)
EXC VAT
Drop-forged Chrome
Vanadium steel puller arms
with locking/gripping feature.
Set includes three sets of
100mm triple leg pullers
with locking features which
clamp the jaws firmly
inside/outside the gear or bearing.
Includes 1.2kg slide hammer.
Model No. PS992
List Price £179.95
•
Chrome Vanadium steel, heat treated for
added strength and chrome plated to resist corrosion.
Reversible legs.
•
Price Including VAT
5pc Slide Hammer Gear/
Bearing Puller Set
•
•
Model No. AK206
List Price £26.95
Model No
Size
Reach
List Price
SGP23
75mm
68mm
£14.95
£8.95
£10.74
INC VAT
SGP24
100mm
110mm
£20.95
£12.95
£15.54
SGP26
150mm
178mm
£37.95
£22.95
£27.54
SGP28
200mm
262mm
£59.95
£37.95
£45.54
FREE
SGP210
250mm
283mm
£114.95
£72.95
£87.54
5pc Prybar/Heelbar Set
•
•
•
•
•
•
•
•
FREE
4pc Prybar
Set
•
•
Model No. AK206
List Price £26.95
•
•
•
•
Fully chromed carbon steel
medium stroke slide hammer.
370mm Overall length
with 1.4kg hammer.
Bearing extractor collets with
internal capacity
from 11 to 32mm.
Model No. AK714
List Price £139.95
£59.95
£71.94
£89.95
£107.94
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Price Including VAT
9pc Mini Bearing
Separator Set
•
10tonne Triple Leg
Hydraulic Puller
Compact set
containing bearing
separator, yoke
and extensions.
Also suitable
for removing
small gears, wheels and
fittings from shafts.
Model No. PS996
List Price £63.95
•
•
•
•
•
FREE
5pc Mini Pick &
Magnetic Pick-Up Set
•
•
Model No. AK52205
List Price £12.95
Promotion Code: VST12.06
Price Excluding VAT
5pc Blind Bearing Puller Set
Swivel thrust
plates on
larger sizes.
Sizes: 75,
100, 150,
200mm.
Model No.
AK79
List Price
£85.95
•
£119.95
£143.94
Price Including VAT
4pc Triple
Leg Gear
Puller Set
•
Model No. AK20641
List Price £29.95
£39.95
£47.94
Price Excluding VAT
•
•
•
Heavy-duty triple leg
10tonne hydraulic puller.
Suitable for pulling hubs,
flanges, gears and
bearings.
Supplied with three
2-position puller legs
and carry-case.
Model No. HP10
List Price £146.95
Price Including VAT
Prices exclude VAT unless stated otherwise
£99.95
£119.94
Price Excluding VAT
Price Including VAT
29
Impact Sockets
04)
. SX0
el No
(Mod
06)
. SX0
el No
(Mod
01)
. SX0
el No
(Mod
041)
. SX0
el No
(Mod
07)
. SX0
el No
(Mod
02)
. SX0
el No
(Mod
(Mod
SX0
l No.
e
(Mod
03)
. SX0
el No
(Mod
•
7pc 1/4"Sq Drive TRX-TS*
Security Socket Bit Set
Forged and heat treated Chrome Vanadium steel
impact grade socket, chemically blackened for corrosion resistance.
Malleable steel material makes the socket suitable for use with
either hand ratchet wrenches or air impact wrenches.
Model No
Size
List Price
09)
. SX0
el No
05)
•
10)
. SX0
el No
(Mod
EXC VAT
•
•
INC VAT
SX001
38mm Deep 1/2"Sq Drive
£12.95
£8.45
£10.14
SX002
1-13/16" Deep 1/2"Sq Drive
£15.95
£9.45
£11.34
•
SX003
30mm Deep 1/2"Sq Drive
£11.25
£6.95
£8.34
SX004
32mm 1/2"Sq Drive Deep
£12.95
£7.95
£9.54
•
•
•
SX0041
33mm 1/2"Sq Drive Bi-Hex Deep
£13.75
£8.25
£9.90
SX005
35mm Deep 1/2"Sq Drive
£13.25
£8.25
£9.90
SX006
36mm Bi-Hex Deep 1/2"Sq Drive
£13.75
£8.45
£10.14
SX007
41mm Deep 1/2"Sq Drive
£14.75
£9.45
£11.34
SX009
40mm Deep 1/2"Sq Drive
£14.75
£9.45
£11.34
SX010
52mm 1/2"Sq
£21.95
£13.95
£16.74
Chrome Vanadium steel sockets and bits.
5-Spline security TRX-TS* bits
suitable for a range of
fuel injection applications.
Sizes: TS10H, TS15H, TS20H,
TS25H, TS27H, TS30H, TS40H.
Supplied with socket rail.
Model No. SX106
List Price £14.95
FREE
£7.95
£9.54
Price Excluding VAT
6-24V Circuit Tester
•
•
Model No. AK4008
List Price £7.75
Price Including VAT
Automotive Assortment Sets
H
o. B
o.
el N
lN
de
(Mo
)
27
)
25
S1
1
HS
B
el
od
(M
d
Mo
.
No
)
71
S1
BH
(
o
el N
)
225
OR
d
(Mo
o
el N
od
(M
9)
41
OR
.B
o
el N
HS
.B
od
(M
B
o.
o
(M
)
20
N
l
de
)
52
)
80
S1
H
.B
o.
el N
1
RP
B
el
od
(M
d
Mo
.
No
0)
20
BS
(
Model No
)
del
20
W7
.B
No
)
555
0)
d
o.
el N
(Mo
30
P15
66)
N3
BH
EXC VAT
INC VAT
125pc Heat Shrink Tubing Set
Contents
£21.95
£11.95
£14.34
BHS127
127pc Heat Shrink Tubing Set
£13.95
£7.95
£9.54
BHS171
171pc Heat Shrink Tubing Set
£16.45
£8.95
£10.74
BHS180
180pc Heat Shrink Tubing Set
£19.95
£12.95
£15.54
BHS52
52pc Heat Shrink Tubing Set
£19.95
£10.95
£13.14
BOR225
225pc Rubber O-Ring Assortment
£12.75
£8.45
£10.14
BOR419
419pc Rubber O-Ring Assortment
£24.95
£14.95
£17.94
BRP120
120pc Roll Pin Assortment
£9.25
£5.95
£7.14
BS200
200pc Spring Assortment
£9.95
£6.45
£7.74
BW720
720pc Washer Assortment
£10.95
£7.25
£8.70
BCP555
555pc Cotter Pin Assortment
£10.45
£6.45
£7.74
BHN366
366pc Machine Screw & Nut Assortment
£8.95
£5.25
£6.30
BHP150
150pc Hair Pin Assortment
£9.95
£6.45
£7.74
P
. BC
l No
de
(Mo
o
(M
List Price
BHS125
del
(Mo
N
H
o. B
Prices exclude VAT unless stated otherwise
Promotion Code: VST12.06
sal
ORDER
NOW
These Items Will e
e
l
a
s
Sell Out
Petrol Engine Camshaft Setting Plate
VAG 2.3, 2.8, 2.9 - Chain Drive
•
•
•
Camshaft setting plate required for valve timing applications on
VAG 2.3, 2.8 and 2.9 chain drive
engines in VW, Seat & Ford models.
Model No. VSE5759
Price Excluding VAT
List Price £7.95
£3.95
£4.74
Price Including VAT
T30 x 140mm 1/2"Sq Drive Security
TRX-Star* Socket Bit
•
•
•
•
•
1/2"Sq Drive satin finished Chrome
Vanadium steel socket with knurled ring.
S2 Steel bit.
Suitable for airbag retaining
screws on most VAG vehicles.
Model No. SX109
List Price £6.25
•
•
•
Go-through type reversible ratchet and socket set.
Specifically designed for bleeding hydraulic clutches.
Especially suited for limited access
applications such as VW Passat.
Includes standard and deep sockets.
Model No. VS0382
List Price £28.95
•
•
•
•
•
Satin finish Chrome Vanadium steel socket with knurled ring.
100mm S2 Steel shaft.
Suitable for Ford cylinder head bolts
on V6 and OHC engines
from 1985 onwards.
Model No. AK552
List Price £8.25
£3.45
£4.14
•
Price Excluding VAT
Price Including VAT
•
•
Flywheel and crankshaft TDC setting
tool and locking pin, now supplied
with injection pump locking pin.
Model No. VS1171
List Price £24.95
£15.95
£19.14
Price Excluding VAT
•
•
•
Applications: Audi 80, 100, A4, A6,
A8, Coupe/Cabrio 2.6/2.8 (91on) ABC/AAH.
Model No. VS1242
List Price £132.95
£6.95
£8.34
•
•
Removes all standard
radiator caps.
Allows extra torque to be
applied easily and safely.
Model No. VS0461
List Price £8.45
Price Including VAT
£4.45
£5.34
•
•
•
Price Excluding VAT
£14.95
£17.94
Price Excluding VAT
Price Including VAT
•
•
Designed for use with deeply recessed spark plugs.
Magnetic spark plug retainer.
Suitable for a range of models,
including Ford, Renault and
Vauxhall/Opel.
Model No. AK6555
List Price £19.45
•
•
•
High quality Chrome Vanadium steel T-handle spark plug socket.
500mm Shaft allows access to deeply recessed spark
plugs and an anodised outer sleeve
rotates freely to enable speed action.
Can be used with 3/8"Sq drive ratchet.
Model No. AK6559
List Price £23.45
Water Pump Pulley
Locking Wrench - VAG
16mm T-Handle Speed
Universal Spark Plug Socket
•
•
•
Suitable for holding the water
pump pulley on VAG vehicles.
For vehicles without
air conditioning.
Model No. VS0902
List Price £23.45
£8.95
£10.74
21mm 3/8"Sq Drive 250mm
Magnetic Spark Plug Socket
•
•
Suitable for holding the water
pump pulley on VAG vehicles.
For vehicles fitted
with air conditioning.
Model No. VS0901
List Price £23.45
Promotion Code: VST12.06
Price Excluding VAT
Price Including VAT
•
•
•
£79.95
£95.94
Suitable for the removal of most car and
light commercial constant velocity joints.
Suitable for use with Model No. DP935B slide
hammer and other
popular makes.
Model No. VS708
Price Excluding VAT
List Price £17.45
14mm T-Handle Speed
Universal Spark Plug Socket
•
Price Including VAT
•
•
Spring type coupling connectors for air conditioning lines.
Locking action prevents spray when disconnecting lines.
Sizes: 3/8", 1/2", 5/8", 3/4".
Model No. VS0456
Price Excluding VAT
List Price £13.45
Water Pump Pulley
Locking Wrench - VAG
•
•
Price Excluding VAT
•
•
•
•
•
Price Including VAT
•
£14.95
£17.94
CVJ Puller Attachment
Radiator Cap Wrench
•
•
Price Including VAT
4pc Air Conditioning Spring Lock
Coupling Tool Set - Vauxhall/Opel
Price Including VAT
•
Price Excluding VAT
Petrol Engine Camshaft &
Crankshaft Kit - Audi 2.6,
2.8 V6 - Belt Drive
Price Including VAT
•
£4.45
£5.34
Diesel Engine Setting/
Locking Kit -Vauxhall/Opel
1.6, 1.7D - Belt Drive
3pc Hydraulic Clutch Socket Set
•
•
•
T55 x 100mm Long TRX-Star*
Socket Bit 1/2"Sq Drive
£14.95
£17.94
Price Excluding VAT
Price Including VAT
•
•
•
High quality Chrome Vanadium steel T-handle spark plug socket.
500mm Shaft allows access to deeply recessed spark
plugs and an anodised outer sleeve rotates
freely to enable speed action.
Can be used with 3/8"Sq drive ratchet.
Model No. AK6560
List Price £23.95
Prices exclude VAT unless stated otherwise
£10.95
£13.14
Price Excluding VAT
Price Including VAT
£12.95
£15.54
Price Excluding VAT
Price Including VAT
£13.45
£16.14
Price Excluding VAT
Price Including VAT
31
sal
ORDER
NOW
These Items Will e
e
l
a
s
Sell Out
3 Function 12V Electronic
Battery Tester
•
•
•
•
Steel case with carry strap.
3 Control system electronic analyser with
large easy-to-read Volt meter and 4 LED
read-out for battery and alternator condition.
Model No. BT91/4
List Price £97.45
Rear Axle Bush Removal Tool Kit
BMW 3 Series (E36, E46)
•
£54.95
£65.94
Price Excluding VAT
•
•
Features a variety of adaptors and plates used in various
combinations for extracting
and installing old/new
bushes.
Price Excluding VAT
Model No. VSE5613
List Price £319.95
£179.95
£215.94
Price Including VAT
Price Including VAT
Back-Probe Set
Moulding Release Tool
•
•
•
•
•
•
•
•
Back-probe harness connectors
without damage to insulation or connector block.
Two sizes to cover most automotive applications.
Probes fit standard Ø4mm multimeter cable plugs.
Get the advantage of straightforward
live circuit checks.
Model No. MMBP
List Price £12.45
•
£7.95
£9.54
•
•
•
Price Excluding VAT
Price Including VAT
6-24V Circuit Tester
with Light & Cigarette
Lighter Connector
•
•
•
•
•
•
•
Tests polarity and is suitable for 6-24V DC circuits.
Positive/negative polarity indicated
by red/green LEDs respectively.
Model No. PP6
List Price £24.95
•
•
•
•
•
£12.95
£15.54
•
•
•
Price Including VAT
Suitable for medium and
heavy-duty truck axles.
Grips tapered cones on studs for fast
and easy access
to bearing assembly.
Model No. SX251
List Price £14.45
£9.95
£11.94
Price Excluding VAT
Price Excluding VAT
Price Including VAT
Price Including VAT
Straight Handled Wire Starter
Tool - Stainless Steel
•
•
•
£8.95
£10.74
•
•
Price Excluding VAT
Suitable for inserting cutting wire through urethane bond.
For use on vehicles with deep dashboard.
Large, comfortable handle
for firm control of the tool.
Price Excluding VAT
Model No. WK0500
List Price £8.95
£4.45
£5.34
Price Including VAT
Adjustable Clench Wrench 10-30mm
•
Price Excluding VAT
Hardened and tempered carbon steel shaft.
Easy access to bonding when used in conjunction with cutting wire.
Features textured comfort grip handle.
Model No. WK0510
List Price £19.95
Price Including VAT
•
•
£3.95
£4.74
Wire Guide
Axle Stud Cone Pliers
•
Used for releasing body moulding clips.
Double sided design suitable for a
variety of clip configurations.
Hardened and tempered steel
head with comfort grip handle.
Overall Length: 185mm.
Model No. WK0312
List Price £7.45
High quality Chrome Vanadium steel clench wrench.
Adjusts from 10-30mm automatically
for rapid application.
Design offers a strong lock grip
whether tightening or loosening.
Suitable for track rod ends.
Model No. AK9465
List Price £19.45
Rear View Mirror Release
Tool - Ford, Vauxhall/Opel
•
•
£10.95
£13.14
•
•
Price Excluding VAT
Enables fast removal of mirrors.
Slide prongs between mirror
and bracket to release.
Model No. WK0340
List Price £8.45
Price Including VAT
£4.45
£5.34
Price Excluding VAT
Price Including VAT
Universal Moulding Release Tool
Mirror Tool 2 & 2.5mm Hex
•
•
•
•
•
•
•
•
•
Used for opening clips to release body mouldings.
Suitable for a variety of clip configurations.
Manufactured entirely from steel
and zinc plated for corrosion resistance.
Model No. RT/UM
List Price £4.25
£1.45
£1.74
Suitable for the removal of most interior mirrors.
Pocket clip keeps this tool handy for instant use.
Model No. WK0331
List Price £7.45
Price Excluding VAT
Price Excluding VAT
Price Including VAT
2pc Electrical Clip
Removal Tool Set
•
•
•
•
•
£2.95
£3.54
Price Including VAT
32
Price Including VAT
2pc Magnetic Edge
Protector Set
Protects panel edges next to workpiece
whilst sanding, grinding or painting.
Magnetic and flexible
for easy installation.
Price Excluding VAT
Model No. SEP2
List Price £6.95
£3.45
£4.14
•
•
•
Ideal for separating
electrical connections.
Particularly suitable
for Weather-Pack
type connections.
Model No. VS922
List Price £9.95
Prices exclude VAT unless stated otherwise
£4.95
£5.94
Price Excluding VAT
Price Including VAT
Promotion Code: VST12.06
10pc Stubby Combination
Spanner Set - Metric
8pc 1/2"Sq Drive Crow's Foot
Spanner Set - Metric
1/2"Sq Drive Digital Torque
Wrench with Angle Function
20-200Nm
•
•
•
•
•
•
•
•
•
•
•
•
Drop-forged Chrome Vanadium steel spanners.
Hardened, tempered and chrome plated for
corrosion resistance.
Fully polished mirror finish.
WallDrive® rings.
Sizes: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19mm.
Stubby configuration gives improved access in
confined spaces.
Supplied on storage/
wall rack.
Price Excluding VAT
Model No. AK633
List Price £35.95
•
•
£19.95
£23.94
•
•
•
•
•
Price Including VAT
9pc 3/8"Sq TRX-P* Socket Bit Set
l No.
(Mode
•
•
•
•
2)
AK622
Drop-forged
Chrome
Vanadium
)
steel sockets
223
AK6
with S2 steel
No.
del
o
TRX-P* bits.
M
(
If a TRX-Star*
bit is used on
a TRX-P*fixing it can result in damage to the fastener
and tool.
Always ensure the correct bit is used for each application.
Note TRX-P* bits do not fit regular TRX-Star* fixings.
Model No
Length
List Price EXC VAT
AK6222
50mm
£32.95 £17.95 £21.54
INC VAT
AK6223
100mm
£42.95 £22.95 £27.54
19pc 1/2"Sq Drive Total Drive®
Socket Set
Manufactured from hardened and tempered Chrome
Vanadium steel with a fully polished mirror finish.
Bi-hex jaws with 1/2"Sq drive, suitable for use with
extension bars and ratchet wrenches.
Ideal for applications where access is limited.
Sizes: 20, 21, 22, 23, 24, 27, 30, 32mm.
Supplied in
storage tray.
Model No. AK5981
Price Excluding VAT
List Price £99.95
£49.95
£59.94
•
•
•
•
•
•
•
•
•
•
•
Hardened and heat treated Chrome Vanadium steel Total
Drive® sockets with a fully polished mirror finish.
All are suitable for Spline, Metric Hex and Metric Bi-Hex
and many are equivalent to TRX-Star*, Whitworth,
Imperial Hex and Imperial Bi-Hex.
Includes knurled ring for extra grip with greasy fingers.
Supplied in
storage case.
Model No. AK70619
Price Excluding VAT
List Price £59.95
£35.95
£43.14
Price Including VAT
Promotion Code: VST12.06
£109.95
£131.94
Price Excluding VAT
Price Including VAT
6pc 1/2"Sq Drive 55mm
TRX-P* Socket Bit Set
•
•
•
•
•
•
•
•
•
Drop-forged Chrome Vanadium steel sockets with
S2 steel TRX-P* bits.
Sockets are hardened and heat treated with a fully
polished finish for resistance to corrosion.
TRX-P* fixings are now commonplace on modern
vehicles and if a TRX-Star* bit is used on a TRX-P*
fixing it can result in damage to the fastener and tool.
Always ensure the correct bit is used for each application.
Note TRX-P* bits do not fit regular TRX-Star* fixings.
Sizes: TP45, TP50,
TP55, TP60, TP70,
TP80.
Price Excluding VAT
Supplied on
socket rail.
Model No. AK6224
Price Including VAT
List Price £32.95
£17.95
£21.64
14pc 1/4, 3/8 & 1/2"Sq Drive
Deep Female TRX-Star*
Socket Set - E4-E24
Price Including VAT
4pc Heavy-Duty
Prybar Set
•
•
•
•
•
•
•
•
•
•
•
•
Forged Chrome Vanadium steel deep sockets.
Heat treated and chrome plated for resistance to corrosion.
Fully polished socket section and drive-end with knurled
ring to assist gripping with oily fingers.
Sizes: 1/4"Sq Drive; E4, E5, E6, E7, E8,
3/8"Sq Drive; E10, E11, E12, E14, E16,
1/2"Sq Drive; E18,
E20, E22, E24.
Model No. AK6114
Price Excluding VAT
List Price £67.45
£29.95
£35.94
Price Including VAT
Prices exclude VAT unless stated otherwise
Heavy-duty, angled shafts.
Chrome Molybdenum steel with blackened finish.
Textured comfort grip handles with hammer cap.
Contents: 200, 300,
460, 610mm.
Model No. AK9105
Price Excluding VAT
List Price £43.95
£27.95
£33.54
Price Including VAT
38pc TRX-Star* Bit Set 3/8” &
1/2”Sq Drive
•
•
Rugged and resilient digital torque wrench.
LCD read-out with LED/audible alarm indicates
achieved and target torque levels.
Will also accumulate angle measurement when multiple
turns are required, ideal for use where access is limited.
Preset desired torque levels or track peak and working
torques using simple push-button menu.
Selectable read-out in Nm, lb.in, lb.ft, kgf.m or degrees.
Reversible Chrome Vanadium 72-tooth ratchet allows
torque reading in either direction.
Accurate to ±2% between 10% and 100% of wrench’s
stated capacity.
Model No. STW306
List Price £199.95
•
•
•
•
•
Chrome Vanadium 6150 hex drive bits in 30, 75, 115
and 175mm lengths.
Hardened and tempered for added strength.
Set includes 3/8" and 1/2"Sq drive to 10mm hex Chrome
Vanadium steel bit adaptors.
Contents: T10, T15, T20, T25, T27, T30, T40, T45, T50,
T55, T60, T70 (1 each 30 & 75mm bits), T40, T45, T50,
T55, T60, T70 (1 each 115 & 175mm bits)
Drive Adaptors;
3/8"Sq x 10mm Hex,
1/2"Sq x 10mm Hex.
Price Excluding VAT
Model No. AK21938
List Price £79.95
£39.95
£47.94
Price Including VAT
33
Motorcycle Piston Ring
Compressing Tool
Motorcycle Valve
Spring
Compressor
NEW
6-8mm Carburettor
Jet Wrench Set
•
•
•
•
•
•
•
Used to
prevent piston
ring damage while
installing the cylinder head.
Easily removed when cylinder is in place.
Tool supplied with four rings ranging from Ø40-85mm.
Will fit most engine sizes.
Model No.
EXC
MS006
VAT
List Price
£24.95
INC
£16.95
£20.34
•
•
•
•
•
•
•
•
•
Useful must have item when needing to remove
fuel tank to perform maintenance on your motorcycle.
Eliminates need to balance fuel
tank in an awkward position.
Simply remove your tank, connect the auxiliary fuel tank,
which is gravity fed, and hang it up using
the hanging hook provided.
Model No. MS029
List Price £39.95
EXC
£22.95
£27.54
VAT
INC
VAT
Reverse Action Spark
Plug Thread Chasers
•
•
•
•
Specially designed to repair damaged
spark plug threads on modern engines.
Unique design allows the tool to be passed through the
plug thread into the combustion chamber, then expanded
to the correct size starting on the inner,
undamaged threads.
Traditional thread restorers rely on luck for
the restored and undamaged threads to align.
Length: 138mm.
Model No
Size
List Price
EXC VAT
MS002
12mm
£34.95
£18.95 £22.94
MS003
14mm
£36.95
INC VAT
•
•
•
•
One of the most
comprehensive
balancer sets
available on the
market.
Features a bank
of four mini-gauges
with lockable valves
enabling user to hold
vacuum values in use.
Supplied with set of long
and short carburettor
adaptors for easy access
amongst the tubes and
wires around the carburettor.
Includes four 900mm
delivery tubes.
Model No.
VS209
List Price
£179.95
•
•
•
•
£99.95
£119.94
EXC
VAT
•
Promotion Code: VST12.06
£15.95
£19.14
VAT
£17.95
£21.54
11pc Adjustable
Hook & Pin
Wrench
Set
•
•
•
•
•
•
•
•
•
•
•
•
460mm Tool gives deep access particularly
suited to adjustment of motorcycle carburettors.
110° Angled head gives improved
access to hard to reach areas.
One turn of handle equals one turn of slotted blade.
Blade tip height is adjustable allowing
it to be set in place during operation.
Model No. MS013
List Price £29.95
INC
VAT
Aids fast installation of threaded studs
without risk of damage to thread.
Ideal for engine and exhaust studs.
Operate using a 19mm spanner and a 5.5mm hex key.
Thread Sizes: M6 x 1.0, M8 x 1.25, M10 x 1.25mm.
Model No. MS051
List Price £19.95
£11.95
£14.34
EXC
VAT
•
•
•
•
•
•
•
•
INC
VAT
Motorcycle Brake
Bleeder
Wedge shaped tool ideal for expanding the gap
between brake pads to speed up pad replacement.
Features moulded rubber handle enabling extra grip.
Model No.
EXC
MS015
VAT
List Price
£27.95
INC
£10.95
£13.14
EXC
VAT
INC
VAT
Pilot Screw
Adjusting Tool
EXC
VAT
INC
VAT
Hardened and tempered drop-forged
Chrome Vanadium steel.
Specially designed for use with slotted retaining rings.
Hook and pin interchangeable hinged arms
with three wrenches covering sizes 19-120mm.
Pin Sizes: Ø4-8mm.
Model No.
EXC
HWS03
VAT
List Price
£99.95
INC
£62.95
£75.54
VAT
Motorcycle Brake
Piston Removal
Pliers
NEW
•
•
•
Motorcycle Stud
Installation
Tool
£19.95 £23.94
Disc Brake
Opening Tool
•
Double ended
wrench suitable
for use with
6 & 8mm round jets.
Single ended wrench
for use on 8mm hex jets.
Model No. MS007
List Price £17.95
INC
VAT
Carburettor Synchronizer
(Vacuum, Mini-Type)
•
•
£29.95
£35.94
VAT
1ltr Motorcycle
Portable
Fuel
Tank
•
Suitable
for most
motorcycle engines.
Features two sizes of threaded adjusters for increased
applications and three sizes of interchangeable jaws.
Ø25-125mm Capacity and 100mm throat depth.
Model No.
EXC
VS1814
VAT
List Price
£54.95
NEW
One man bleeding/servicing of hydraulic brakes
and clutches.
Utilises a small non-return valve and two connector
hoses that attach to the scooter or motorcycle
bleed nipple.
EXC
Model No.
VAT
MS014
List Price
INC
£19.95
VAT
£11.95
£14.34
Prices exclude VAT unless stated otherwise
•
•
•
•
•
•
Extract seized brake calliper
pistons without risk of damage.
Serrated pressure blocks for non-slip operation.
Clamp screw allows pliers to be fixed into
cup of piston for added pulling power.
Capacity: Ø16.5 - 40mm.
Model No.
VS1806
List Price
£29.95
£17.95
£21.54
EXC
VAT
INC
VAT
34
Motorcycle Chain
Alignment Tool
NEW
•
•
•
•
Simple to use yet accurate tool for
correct alignment of the chain and sprocket.
Helps prevent wear to the chain and sprockets.
Model No.
MS005
List Price
£19.95
£14.95
£17.94
Motorcycle
Chain
Puller
Motorcycle Chain
Breaker &
Riveter
•
•
•
•
•
EXC
VAT
•
INC
VAT
Heavy-Duty Motorcycle
Chain Splitter &
Riveting
Tool Set
•
•
•
•
Comprehensive set
designed to shorten
and lengthen motorcycle
chains by removing or replacing links.
Set is also ideal for use on
horticultural and agricultural machinery.
Includes tools designed for riveting and plate
holder for connecting links accurately.
Model No.
MS025
List Price
£149.95
£79.95
£95.94
£11.95
£14.34
•
•
£29.95
£35.94
EXC
VAT
INC
VAT
•
£29.95
£35.94
•
•
•
EXC
VAT
125mm
Motorcycle
Clutch
Spring
Tool
•
•
•
•
•
•
35
Specialised tool
designed to
remove clutch
springs from motorcycles.
Pushes through centre to remove
springs quickly and safely.
Manufactured from drop-forged steel.
Suitable for use on motorcycles with 125mm pulleys.
Model No.
EXC
MS026
VAT
List Price
£37.95
INC
£19.95
£23.94
•
INC
VAT
VAT
£39.95
£47.94
EXC
VAT
•
Composite, angled chain, brush featuring
adjustable brush adaptors to fit various size chains.
Suitable for use on all chain types.
Model No.
VS1804
EXC
List Price
VAT
£16.95
£9.95
£11.94
INC
VAT
Fitted with two heavy-duty rollers providing access to
chain and wheel cleaning while motorcycle is stationary.
Small lightweight design ideal for use in tight spaces.
Manufactured with non-slip base and loading
ramp to easily position wheel onto rollers.
Model No.
MCRS1
EXC
VAT
List Price
£59.95
£44.95
£53.94
•
•
•
•
•
INC
VAT
Enables shock bushes to be installed straight and fast.
Suits most bushes/shocks.
Sizes: 12.5, 14, 16, 18mm.
Model No.
EXC
MS048
VAT
List Price
£22.95
INC
£14.95
£17.94
Motorcycle
Flywheel
Puller
•
•
•
•
INC
VAT
4pc Motorcycle Shock
Bushing Driver Set
Motorcycle Locking
Pulley Holder
•
•
VAT
Motorcycle Chain
Brush
•
•
•
•
•
•
INC
VAT
•
Motorcycle
Roller
Stand
•
•
•
•
Breaks and rejoins most types of chain quickly and easily.
Suitable for most sizes of drive or
cam chain from #35 to #630.
Model No.
EXC
VS779
VAT
List Price
£84.95
INC
Specially designed to remove
dirt from motorcycle chains.
All four sides of the chain are
cleaned at once by six stiff
brush pads located in the tool.
Model No. VS1817
List Price £53.95
Motorcycle Swing Arm
Bearing Tool
Universal tool works on most Japanese bikes.
Aids the straight installation of
the swing-arm needle bearings.
Supplied with 3 drivers and 3 plates.
Not suitable for use with impact tools.
Model No.
MS049
List Price
£49.95
EXC
VAT
Motorcycle Chain
Cleaning Kit
•
•
•
Useful third hand tool for pulling
chain ends together while re-linking.
Easy-to-use and suitable for most sizes of chain.
Model No.
VS1816
List Price
£19.95
Suitable for holding flywheels, clutches
and pulleys during removal and installation.
8mm Pins on one side and flat blades on the other.
Features locking adjustment screw to keep tool at
required set size with quick release when finished.
Model No.
MS036
EXC
VAT
List Price
£29.95
£19.95
£23.94
Prices exclude VAT unless stated otherwise
INC
VAT
•
•
•
•
Designed with 6 different sized threaded
adaptors for flywheel rings on motorcycles.
Models with tapered lock type rings cannot be
removed without the use of this specialized tool.
Suitable for most types of motorcycle.
Model No.
MS034
List Price
£31.95
£17.95
£21.54
VAT
EXC
VAT
INC
VAT
Promotion Code: VST12.06
2pc Rim Protector
355mm Motorcycle
Tyre Lever
430mm Heavy-Duty
Tyre Lever
•
•
•
•
•
•
•
Moulded protectors with connecting cord.
Designed to reduce the risk of damage to motorcycle
wheel rims when removing or fitting tyres with tyre levers.
Model No.
EXC
VS1807
VAT
List Price
£9.95
INC
£4.95
£5.94
•
•
•
•
•
•
Bench mounting manual bead
breaker, especially suitable
for motorcycle tyres.
Lever action with parallel linkage
keeps head at the optimum
angle for breaking the bead.
Model No. TC968
List Price £49.95
•
•
•
•
•
£34.95
£41.94
•
•
•
Prevents spindle from spinning
when tightening or loosening wheel nut.
Features 1/2"Sq drive adaptor and four
hex bits for different sizes of spindle.
Spindle Sizes: 17, 19, 22, 24mm.
Model No.
VS1808
List Price
£24.95
£11.95
£14.34
•
•
•
•
EXC
VAT
•
INC
VAT
•
•
Promotion Code: VST12.06
•
•
•
•
•
•
£19.95
£23.94
•
EXC
VAT
INC
VAT
•
•
•
£14.95
£17.94
EXC
VAT
INC
VAT
Professional
motorcycle
wheel balancer.
Suitable for most
motorcycle wheels.
Includes two cones
and spindle for
precise, easy
alignment and
balancing.
Uses gravity to find
the heavy point of
a wheel and tyre.
Model No.
VS1819
List Price £129.95
£74.95
£89.94
EXC
VAT
INC
VAT
EXC
VAT
INC
VAT
Spoke Wrench
Prevents spindle from spinning
when tightening or loosening wheel nut.
Use appropriate socket on free
end of tool to hold spindle.
Four sizes to fit Honda, Kawasaki, Suzuki,
Yamaha, Buell and some BMW motorcycles.
Model No.
MS008
List Price
£19.95
£9.95
£11.94
•
•
•
•
Specially designed spoke wrench with 6 different sizes.
Suitable for adjusting spoke tension
and removing/installing new spokes.
Model No. MS037
List Price £12.95
£7.95
£9.54
EXC
VAT
INC
VAT
Motorcycle Bead Tool
Specially designed spoke wrench
with nine interchangeable sized heads.
Suitable for adjusting spoke tension
and correcting buckled wheels.
Model No.
VS1810
List Price
£37.95
•
INC
VAT
Motorcycle Spindle
Tool 17, 19,
22 &
24mm
•
•
•
EXC
VAT
•
•
Heavy-duty drop-forged and tempered steel with a
phosphate finish for anti-corrosion resistance.
Curved rounded tip for ease of use
when rolling round the rim.
Suitable for use on motorcycle,
small agricultural or leisure tyres.
Maximum tip width 30mm, handle width 38mm.
Model No.
MS012
List Price
£25.95
Motorcycle Wheel Balancer
£189.95
£227.94
INC
VAT
10pc Spoke
Wrench
Set
•
•
Heavy-duty tyre changer suitable
for wide variety of tyres and wheels
including those fitted to
motorcycles, ATVs, go-karts
and golf buggies.
Works on bearing or hub centred
wheels and supplied with
two centre posts.
Min./Max. Wheel Size: 102/524mm.
Includes manual bead breaker and is
supplied with tyre bar for
mounting and de-mounting.
Fast and simple operation.
Model No. TC965
List Price £269.95
EXC
VAT
5pc Motorcycle Spindle
Tool Set
•
•
Motorcycle & Mini
Tyre Changer
•
•
•
£9.95
£11.94
VAT
Tyre Bead Breaker
•
•
Drop-forged, sprayed and tempered
steel finish for anti-corrosion resistance.
Curved rounded tip for ease of use when
rolling round the rim.
Suitable for use on motorcycle,
small agricultural or leisure tyres.
Maximum tip width 22mm, handle width 30mm.
Model No.
MS011
List Price
£19.95
EXC
VAT
INC
VAT
Motorcycle
Spindle
Tool
A must for installing tyres on spoked wheels.
Slot hooks round spoke and pushes
bead down on opposite side of the tool.
The bead is held into position
while fitting the tyre with tyre levers.
No more struggling to keep the bead down.
Model No.
VS1821
List Price
£21.45
£8.95
£10.74
Prices exclude VAT unless stated otherwise
•
•
•
•
•
EXC
VAT
INC
VAT
Prevents spindle from spinning when
tightening or loosening wheel nut.
Use socket on free end of tool to hold spindle.
Applications: 24mm; Honda and Suzuki,
22mm; Kawasaki, 19mm; Yamaha.
Model No. VS1805
List Price £10.95
£4.95
£5.94
EXC
VAT
INC
VAT
36
Motorcycle Wheel Chocks
Motorcycle Front
Wheel Chock
•
•
•
•
Black powder coated heavy-duty tubular frame.
Pre-drilled holes allow chock to be bolted to
either floor or trailer to prevent movement
while being worked on or transported.
•
•
Model No
Max. Width
List Price
EXC VAT
WC06
95mm
£14.95
£10.95 £13.14
INC VAT
WC07
140mm
£16.95
£11.95 £14.34
WC08
165mm
£18.95
£12.95 £15.54
Quick Lift Stand for Off-Road/
Trials Bikes
200kg
Capacity
•
•
•
•
•
•
Features adjustable pivoting wheel
guide, which secures front wheel within chock.
Three adjustable heights
depending on diameter of wheel.
Suitable for wheels with tyre widths
90-130mm and diameters 430-535mm.
Frame bolts to the floor (fixings not included) stabilising
motorcycles without the need for side or centre stands.
Model No. FPS6
List Price £59.95
£34.95
£41.94
EXC
VAT
•
•
•
•
•
INC
VAT
Scissor Stand for Motorcycles
300kg Capacity
•
•
•
•
•
Lightweight aluminium design, weighs only 4.9kg without
compromising the maximum lifting capacity of 200kg.
Unique design folds flat when not in use,
saving transport/workshop space.
Height: 450mm.
Model No. MPS6
List Price £109.95
•
•
•
•
•
•
•
•
37
Scissor support stand suitable for use
either on a motorcycle lift or on the floor.
Raise by hand or with 22mm spanner/socket.
Supplied with sliding pin carriers and 3 pairs of
support pins.
Min./Max. Height: 180/555mm.
Model No.
MC5905
List Price
£107.45
£74.95
£89.94
•
•
•
EXC
VAT
INC
VAT
•
•
•
INC
VAT
Scissor support stand suitable for use
either on a motorcycle lift or on the floor.
Raise by hand or with sliding T-bar.
Supplied with non-slip platform
cover for added load security.
Fitted with ball bearing rollers for smooth lifting
and lowering.
Min./Max. Height: 85/365mm.
Model No.
MC5908
List Price
£109.95
£79.95
£95.94
Prices exclude VAT unless stated otherwise
£42.95
£51.54
EXC
VAT
£159.95
£191.94
EXC
VAT
INC
VAT
Off-Road/Trials
Bike/Motorcycle Lift
135kg
Capacity
•
•
•
EXC
VAT
Aluminium tubular frame design, with anti-slip
rubber top, offers great strength to weight ratio.
Model No. MPS7
List Price £69.95
INC
VAT
•
•
£54.95
£65.94
EXC
VAT
Scissor Stand for Motorcycles
450kg Capacity
•
Features a pivoting wheel guide,
which secures rear wheel within chock.
Four adjustable depths depending on diameter of wheel.
Frame bolts to the floor stabilising motorcycles
without the need of side or centre stands.
Suitable for wheels with tyre widths
130-180mm and diameters 355-535mm.
Model No. FPS4
List Price £79.95
Fixed Off-Road/Trials Bike Stand
200kg Capacity
£64.95
£77.94
EXC
VAT
•
INC
VAT
Folding Off-Road/
Trials Bike
Stand
200kg
Capacity
Ideal for use with off-road/trials bikes to easily lift the bike
when needing to perform maintenance/services
or cleaning.
Simple, one foot, step and lift mechanism means
the bike can be instantly raised in one motion.
Lightweight aluminium design, weighs only 4.1kg without
compromising the maximum lifting capacity of 200kg.
Min./Max. Height: 320/395mm.
Model No. MPS5
List Price £99.95
£62.95
£75.54
•
•
Motorcycle Rear Wheel Chock
•
•
•
EXC
VAT
INC
VAT
Min./Max. Height:
355/895mm.
Table
Width/Length:
350/410mm.
Unique foot design
and safety pins
allow use with
off-road/trials
bikes.
Features three
locking heights.
Support
platform with
rubber top
protects
paintwork
on bike.
Model No.
MC135
List Price
£214.95
INC
VAT
Promotion Code: VST12.06
Adjustable Front
Wheel Stand
Front Headstock Stand
•
•
•
•
•
•
Width adjustment from 155 to 280mm,
making it suitable for almost all sports bikes.
Allows easy removal and cleaning of front wheel.
Please note all front paddock stands need to be used in
conjunction with a suitable rear
stand to ensure bike stability.
Model No. FPS2
List Price £59.95
£39.95
£47.94
EXC
VAT
•
•
•
•
•
•
Front Paddock Stand
Aluminium
Strong tubular frame supplied with a range of
pins to fit the most common headstock sizes.
Once in place, makes access to all mechanical
components at the front of the bike easy.
Stand folds down for compact storage when not in use.
Supplied with width and angle adjustable rubber support
pads to quickly and easily use as rear support stand.
Pin Sizes: 12, 15, 16, 18, 20, 24mm.
Model No. FPS5
List Price £99.95
£74.95
£89.94
INC
VAT
•
•
•
•
•
•
•
Features width adjustment from 200 to 300mm.
Fitted with self aligning rubber supports.
Design ensures rim and tyre protection at all times.
Once the bike is supported, allows easy
removal and cleaning of front wheel.
Please note all front paddock stands need to be used in
conjunction with a suitable rear stand
to ensure bike stability.
Model No. AFPS1
List Price £99.95
£64.95
£77.94
EXC
VAT
INC
VAT
Universal Rear Wheel Stand with
Rubber Supports
Single Sided
Rear Support
Stand
Rear Paddock Stand
Aluminium
•
•
•
•
•
•
•
•
Lifts and stabilises any dual arm
sports bike quickly and easily.
Fitted with width and angle
adjustable rubber support pads.
Min./Max. Width: 220/330mm.
Model No. RPS1
List Price £59.95
•
•
£39.95
£47.94
EXC
VAT
•
•
INC
VAT
Suitable for motorcycles with single rear
swing arm which cannot be supported both sides.
Heavy-duty construction, adjustable height.
Supplied without locating pins which
need to be purchased separately
for the make/model of bike to be supported.
Model No. RPS3
List Price £79.95
£49.95
£59.94
•
EXC
VAT
£64.95
£77.94
INC
VAT
Motorcycle & Quadbike Lift
550kg Capacity
Four Arm Centre Stand
•
•
Lightweight, highly durable aluminium design.
Lifts and stabilises any dual arm
sports bikes quickly and easily.
Rubber supports mounted on heavy-duty box
section for continuous professional use.
Model No. ARPS1
List Price £99.95
•
•
•
•
•
•
•
•
•
•
•
Lifts and stabilises hard and soft
tail cruiser style bikes quickly and safely.
Features adjustable length and height with soft PVC
sheaths for protection to underside of bike.
Lifts complete bike off the ground
allowing easy removal of wheels.
Min./Max. Height: 200/270mm.
Min./Max Length: 300/425mm.
Model No. MPS4
EXC
List Price £84.95
Promotion Code: VST12.06
£54.95
£65.94
•
•
•
•
•
•
VAT
INC
VAT
•
Heavy steel construction with bottle jack style power unit.
Lifting arms suitable for lifting bikes with a suitable
structure, quads, all terrain vehicles,
trikes and transmissions.
Features mechanical safety lock to prevent inadvertent
lowering and stabiliser feet for added lifting control.
Min./Max. Height: 130/435mm.
Fully portable.
Model No.
EXC
VAT
MC480
List Price
INC
£179.95
VAT
£119.95
£143.94
Prices exclude VAT unless stated otherwise
INC
VAT
EXC
VAT
INC
VAT
Motorcycle & Quad Lift
680kg Capacity
•
•
EXC
VAT
Heavy steel construction
with bottle jack style power unit.
Arms suitable for lifting bikes with a
suitable structure, quads, all terrain
vehicles, trikes and transmissions.
Min./Max. Height: 120/420mm.
Features mechanical safety lock to
prevent inadvertent lowering and
stabiliser feet for added lifting control.
Model No. MC402
List Price £189.95
£134.95
£161.94
EXC
VAT
INC
VAT
38
Motorcycle Lift
450kg Capacity
Motorcycle Rear
Lift for MC450
•
•
•
•
•
•
•
•
•
Motorcycle Lift 450kg Capacity
FREE
Model No. MC450RL
List Price £34.95
Min./Max. Height: 175/810mm.
Platform (W x L): 145 x 2140mm.
All steel construction with foot operated, integral
hydraulic pump and ram assembly.
Fitted with platform safety lock device to prevent accidental lowering.
Base assembly fitted with transport wheels allowing
lift to be moved in horizontal or vertical position.
Model No. MC450
List Price £499.95
•
•
•
•
£349.95
£419.94
EXC
VAT
•
•
•
•
Min./Max. Height: 150/600mm.
Working Platform Size (W x L): 500 x 1820mm.
Steel construction heavy-duty hydraulic pump and ram assembly.
Fitted with platform safety locking device with four height settings of
600mm, 530mm, 440mm and 320mm.
Supplied with full width loading ramp and adjustable front wheel clamp.
Only suitable for motorcycles with a centre stand.
Model No. MC455
List Price £499.95
£329.95
£395.94
INC
VAT
Motorcycle Lift
365kg Capacity
•
•
•
•
•
•
•
•
•
•
•
•
•
39
All steel construction with air motor
powering the hydraulic pump.
Model No. MC365A
List Price £599.95
EXC
VAT
INC
VAT
Hydraulic Mini Tractor/Quad/
Motorcycle Lift 680kg Capacity
•
•
•
•
INC
VAT
Motorcycle Lift 365kg
Capacity Air/Hydraulic
Min./Max. Height: 220/760mm.
Working Platform Size (W x L): 480 x 1350mm.
Fitted with safety lock device 760mm, 640mm and 500mm.
Suitable only for motorcycles with a centre stand.
Support platform fitted with full width loading ramp.
Model No. MC365
List Price £469.95
£299.95
£359.94
EXC
VAT
£374.95
£449.94
EXC
VAT
£899.95
£1079.94
EXC
VAT
INC
VAT
Hydraulic Mini Tractor/Quad/
Motorcycle Lift 700kg Capacity
All steel construction with heavy-duty hydraulic ram.
Supplied with separate, foot operated, hydraulic pump and reservoir unit.
Features two additional side platforms for extra width.
Ramp and platform made with chequer plate
surface to ease loading and positioning of mini tractor.
Safety lock to prevent accidental lowering.
Model No. MT680
List Price £1499.95
•
•
•
•
•
£899.95
£1079.94
EXC
VAT
INC
VAT
•
•
Min./Max. Height: 180/900mm.
Platform Size (W x L): 950 x 2250mm.
All steel construction with heavy-duty hydraulic ram.
Full width ramp and platform with chequer plate
surface to ease loading and positioning of vehicle.
Fitted with over-run guard at front of platform
and mechanical safety lock.
Model No. MT700
List Price £1599.95
Prices exclude VAT unless stated otherwise
INC
VAT
Promotion Code: VST12.06
Two Arm
Centre Stand
•
Motorcycle
Lift 400kg
Capacity
•
•
•
•
Min./Max. Height:
180/760mm.
Platform Size:
685 x 2200mm.
•
•
Lifts and stabilises front or back end
of hard and soft tail cruiser
style bikes quickly and safely.
protection to underside of bike.
Design of stand ensures rim and tyre
protection and once the front of the
bike is supported, allows easy
removal of front wheel.
Minimum/Maximum Height:
200/275mm.
Model No. MPS2
List Price £39.95
(*Pictured on centre of lift)
£22.95
£27.54
*Model No.
MPS2
Hydraulic Version
Air/Hydraulic Version
•
•
•
•
All steel construction with heavy-duty,
foot operated, integral hydraulic pump and
ram assembly
Model No. MC390
List Price £689.95
£429.95
£515.94
•
•
EXC
VAT
INC
VAT
d)
(MPS
2N
lude
ot Inc
All steel construction with air motor
powering the hydraulic pump.
Model No. MC390AH
List Price £819.95
£499.95
£599.94
EXC
VAT
INC
VAT
EXC
VAT
INC
VAT