MC67
USER GUIDE
MC67
USER GUIDE
72E-161697-02
Rev. A
August 2013
ii
MC67 User Guide
No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means,
without permission in writing from Motorola. This includes electronic or mechanical means, such as
photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to
change without notice.
The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on
a licensed basis. Motorola grants to the user a non-transferable and non-exclusive license to use each
software or firmware program delivered hereunder (licensed program). Except as noted below, such license
may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of
Motorola. No right to copy a licensed program in whole or in part is granted, except as permitted under
copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with
other program material, create a derivative work from a licensed program, or use a licensed program in a
network without written permission from Motorola. The user agrees to maintain Motorola’s copyright notice on
the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in
whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed
program delivered to the user or any portion thereof.
Motorola reserves the right to make changes to any software or product to improve reliability, function, or
design.
Motorola does not assume any product liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any Motorola, Inc.,
intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in
Motorola products.
iii
Revision History
Changes to the original guide are listed below:
Change
Date
Description
-01 Rev. A
09/19/12
Initial release.
-02 Rev. A
08/30/13
Add CDMA WAN support.
iv
MC67 User Guide
TABLE OF CONTENTS
Revision History .............................................................................................................................. iii
About This Guide
Introduction .....................................................................................................................................
Documentation Set ...................................................................................................................
Configurations.................................................................................................................................
Software Versions .....................................................................................................................
Chapter Descriptions ......................................................................................................................
Notational Conventions...................................................................................................................
Related Documents ........................................................................................................................
Service Information .........................................................................................................................
xiii
xiii
xiii
xiv
xiv
xv
xv
xvi
Chapter 1: Getting Started
Introduction ....................................................................................................................................
Unpacking ......................................................................................................................................
Getting Started ...............................................................................................................................
Installing a microSD Card ........................................................................................................
Installing the SIM Card .............................................................................................................
Installing the Battery ................................................................................................................
Charging the Battery ................................................................................................................
Charging the Main Battery .................................................................................................
Charging Spare Batteries ...................................................................................................
Charging Temperature .......................................................................................................
Powering On the MC67 ............................................................................................................
Calibrating the Screen ........................................................................................................
Checking Battery Status ................................................................................................................
Replacing the Battery .....................................................................................................................
Replacing the microSD Card .........................................................................................................
Replacing the SIM Card .................................................................................................................
Battery Management ......................................................................................................................
Changing the Power Settings ..................................................................................................
Changing the Backlight Settings ..............................................................................................
Changing the Keypad Backlight Settings .................................................................................
1-1
1-1
1-2
1-2
1-3
1-4
1-5
1-5
1-6
1-6
1-6
1-6
1-6
1-7
1-7
1-8
1-9
1-9
1-9
1-9
vi
MC67 User Guide
Turning Off the Radios ............................................................................................................. 1-10
Chapter 2: Using the MC67
Introduction ....................................................................................................................................
Features .........................................................................................................................................
LED Indicators ...............................................................................................................................
Keypads .........................................................................................................................................
Finger Scrolling ..............................................................................................................................
Home Screen .................................................................................................................................
Classic Today Screen ..............................................................................................................
Status Bar ................................................................................................................................
Tile Bar .....................................................................................................................................
Adjusting Volume ...........................................................................................................................
Resetting the MC67 .......................................................................................................................
Performing a Warm Boot .........................................................................................................
Performing a Cold Boot ............................................................................................................
Locking the MC67 ..........................................................................................................................
Un-locking with Simple PIN ......................................................................................................
Un-locking with Strong Password ............................................................................................
Battery Status Indications ..............................................................................................................
Battery Reserve Options ..........................................................................................................
Main Battery Temperature Notifications ...................................................................................
Interactive Sensor Technology ......................................................................................................
Power Management .................................................................................................................
Display Orientation ...................................................................................................................
Free Fall Detection ...................................................................................................................
Stylus .............................................................................................................................................
Entering Data .................................................................................................................................
Using Voice-Over-IP ......................................................................................................................
2-1
2-1
2-2
2-3
2-4
2-4
2-6
2-7
2-10
2-12
2-12
2-12
2-12
2-12
2-13
2-13
2-14
2-15
2-16
2-17
2-17
2-17
2-17
2-18
2-18
2-19
Chapter 3: Data Capture
Introduction ....................................................................................................................................
Imaging ..........................................................................................................................................
Operational Modes ...................................................................................................................
Digital Camera ...............................................................................................................................
Scanning Considerations ...............................................................................................................
Imager Scanning ............................................................................................................................
Digital Camera Scanning ...............................................................................................................
Using the RS507 Hands-free Imager .............................................................................................
DataWedge ....................................................................................................................................
Enable DataWedge ..................................................................................................................
Disable DataWedge .................................................................................................................
Taking Pictures ..............................................................................................................................
Burst Mode ...............................................................................................................................
Timer Mode ..............................................................................................................................
Editing Pictures ........................................................................................................................
Setting a Picture as Wallpaper .................................................................................................
Camera Configuration ..............................................................................................................
Recording a Video .........................................................................................................................
3-1
3-1
3-1
3-2
3-2
3-3
3-4
3-4
3-5
3-5
3-5
3-6
3-6
3-6
3-7
3-7
3-7
3-8
Table of Contents
Video Configuration ................................................................................................................. 3-8
Viewing Pictures and Videos ......................................................................................................... 3-9
Customizing Pictures & Videos ...................................................................................................... 3-9
Chapter 4: Making Calls
Introduction ....................................................................................................................................
Making a Call .................................................................................................................................
Using the Phone Keypad .........................................................................................................
Smart Dialing ...........................................................................................................................
Using Contacts .........................................................................................................................
Using Call History ....................................................................................................................
Making a Speed Dial Call .........................................................................................................
Answering a Call ............................................................................................................................
Incoming Call Features ............................................................................................................
Missed Call Notification ..................................................................................................................
Emergency Calling .........................................................................................................................
Audio Modes ..................................................................................................................................
Using a Bluetooth Headset ......................................................................................................
Adjusting Audio Volume ...........................................................................................................
Muting a Call ..................................................................................................................................
Taking Notes ..................................................................................................................................
Using Call History ..........................................................................................................................
Managing Call History ..............................................................................................................
Changing the Call History View ..........................................................................................
Resetting the Recent Calls Counter ...................................................................................
Deleting All Call History Items ............................................................................................
Viewing Call Status ............................................................................................................
Using the Call History Menu ...............................................................................................
Conference Calling ........................................................................................................................
Swapping Calls ..............................................................................................................................
Speed Dial Setup ...........................................................................................................................
Adding a Speed Dial Entry .......................................................................................................
Editing a Speed Dial Entry .......................................................................................................
Deleting a Speed Dial Entry .....................................................................................................
4-1
4-1
4-1
4-2
4-3
4-3
4-4
4-4
4-5
4-5
4-5
4-5
4-6
4-6
4-6
4-6
4-7
4-7
4-7
4-8
4-8
4-8
4-9
4-10
4-10
4-11
4-11
4-13
4-14
Chapter 5: Using WLAN
Introduction ....................................................................................................................................
Fusion Overview ............................................................................................................................
Connecting to the Internet ........................................................................................................
Supported Applications ..................................................................................................................
Fusion Setup ..................................................................................................................................
5-1
5-1
5-2
5-2
5-3
Chapter 6: Messaging
Introduction ....................................................................................................................................
Email ..............................................................................................................................................
Creating an Email Message .....................................................................................................
Viewing an Email Message ......................................................................................................
Replying to a Message ............................................................................................................
6-1
6-1
6-1
6-1
6-2
vii
viii
MC67 User Guide
Text Messaging .............................................................................................................................
Viewing Text Messages ...........................................................................................................
Sending a Text Message .........................................................................................................
Using a Dual Line SIM ...................................................................................................................
Chapter 7: Bluetooth
Introduction ....................................................................................................................................
Adaptive Frequency Hopping ........................................................................................................
Security ..........................................................................................................................................
Security Mode 3 (Link Level Encryption) .................................................................................
Microsoft Bluetooth Stack ..................................................................................................
StoneStreet One Bluetooth Stack ......................................................................................
FIPS 140-2 ...............................................................................................................................
Bluetooth Configuration .................................................................................................................
Bluetooth Power States .................................................................................................................
Cold Boot ...........................................................................................................................
Warm Boot .........................................................................................................................
Suspend .............................................................................................................................
Resume ..............................................................................................................................
Using Microsoft Bluetooth Stack ....................................................................................................
Turning the Bluetooth Radio Mode On and Off ........................................................................
Enabling Bluetooth .............................................................................................................
Disabling Bluetooth ............................................................................................................
Discovering Bluetooth Device(s) ..............................................................................................
Available Services ....................................................................................................................
Object Push Services via Beam .........................................................................................
Internet Sharing .................................................................................................................
Serial Port Services ...........................................................................................................
ActiveSync Using Serial Port Services ...............................................................................
Phone Book Access Profile Services .................................................................................
Using Bluetooth StoneStreet One Bluetooth Stack .......................................................................
Turning the Bluetooth Radio Mode On and Off ........................................................................
Disabling Bluetooth ............................................................................................................
Enabling Bluetooth .............................................................................................................
Modes ......................................................................................................................................
Wizard Mode ......................................................................................................................
Explorer Mode ....................................................................................................................
Discovering Bluetooth Device(s) ..............................................................................................
Available Services ....................................................................................................................
File Transfer Services ........................................................................................................
Connecting to the Internet Using an Access Point .............................................................
Dial-Up Networking Services .............................................................................................
Add a Dial-up Entry ............................................................................................................
Object Exchange Push Services ........................................................................................
Headset Services ...............................................................................................................
Serial Port Services ...........................................................................................................
ActiveSync Using Serial Port Services ...............................................................................
Personal Area Network Services .......................................................................................
A2DP/AVRCP Services .....................................................................................................
Connect to a HID Device ...................................................................................................
6-2
6-2
6-4
6-5
7-1
7-1
7-2
7-2
7-2
7-2
7-3
7-4
7-5
7-5
7-5
7-5
7-6
7-6
7-6
7-6
7-6
7-7
7-9
7-9
7-10
7-11
7-12
7-13
7-14
7-14
7-14
7-14
7-14
7-14
7-14
7-15
7-18
7-18
7-20
7-20
7-22
7-23
7-26
7-27
7-27
7-29
7-29
7-30
Table of Contents
Pairing with Discovered Device(s) ...........................................................................................
Bluetooth Settings ....................................................................................................................
Device Info .........................................................................................................................
Services .............................................................................................................................
Security ..............................................................................................................................
Discovery ...........................................................................................................................
Virtual COM Port ................................................................................................................
HID .....................................................................................................................................
Profiles ...............................................................................................................................
System Parameters ............................................................................................................
Miscellaneous ....................................................................................................................
7-30
7-32
7-32
7-32
7-37
7-37
7-38
7-38
7-39
7-39
7-39
Chapter 8: Using GPS Navigation
Introduction ....................................................................................................................................
Software Installation .......................................................................................................................
MC67 GPS Setup ..........................................................................................................................
Operation .......................................................................................................................................
GPS Maps on microSD Cards .................................................................................................
Answering a Phone Call While Using GPS ..............................................................................
Losing the GPS Signal While in a Vehicle ...............................................................................
Assisted GPS .................................................................................................................................
8-1
8-1
8-1
8-2
8-2
8-2
8-2
8-2
Chapter 9: Settings
Settings Folder ...............................................................................................................................
Locking the MC67 ..........................................................................................................................
Power Settings ...............................................................................................................................
Backlight Settings ..........................................................................................................................
Keypad Backlight Settings .............................................................................................................
USB Configuration .........................................................................................................................
UI Settings .....................................................................................................................................
Start Screen Settings ...............................................................................................................
IE Zoom Mapping .....................................................................................................................
IST Settings ...................................................................................................................................
Info Tab ....................................................................................................................................
Display Tab ..............................................................................................................................
Power Management Tab ..........................................................................................................
On Face Down ...................................................................................................................
Keep Alive On Motion ........................................................................................................
Setting Sensitivity ...............................................................................................................
Events Tab ...............................................................................................................................
Sensors Tab .............................................................................................................................
Email Setup ....................................................................................................................................
Setting Up an IMAP or POP Account .......................................................................................
Automatic Email Setup .......................................................................................................
Manual Email Setup ...........................................................................................................
Entering Email Settings Manually ......................................................................................
Editing an Email Account .........................................................................................................
Setting Email Signatures ..........................................................................................................
9-1
9-4
9-4
9-5
9-5
9-5
9-6
9-6
9-6
9-8
9-8
9-8
9-8
9-9
9-9
9-9
9-10
9-10
9-12
9-12
9-12
9-13
9-13
9-14
9-15
ix
x
MC67 User Guide
Chapter 10: Accessories
Introduction ....................................................................................................................................
Accessories ...................................................................................................................................
Single Slot USB Cradle ..................................................................................................................
Charging the MC67 Battery .....................................................................................................
Charging the Spare Battery .....................................................................................................
Battery Charging Indicators .....................................................................................................
Charging Temperature .......................................................................................................
Single-slot Ethernet/Modem/USB Cradle ......................................................................................
Country Settings ......................................................................................................................
Connection Setup ....................................................................................................................
Indicators .................................................................................................................................
Operation .................................................................................................................................
Ethernet Connection ..........................................................................................................
Modem Connection ............................................................................................................
Four Slot Charge Only Cradle .......................................................................................................
Charging ..................................................................................................................................
Battery Charging Indicators .....................................................................................................
Charging Temperature .......................................................................................................
Four Slot Ethernet Cradle ..............................................................................................................
Charging ..................................................................................................................................
Communication ........................................................................................................................
LED Indicators (CRD5500-4000ER) ..................................................................................
LED Indicators (CRD5501-4000ER) ..................................................................................
VCD5000 Vehicle Cradle ...............................................................................................................
Charging the MC67 Battery .....................................................................................................
Removing the MC67 ..........................................................................................................
Battery Charging Indicators .....................................................................................................
Charging Temperature .......................................................................................................
Four Slot Battery Charger ..............................................................................................................
Battery Charging .....................................................................................................................
Battery Charging Indicators .....................................................................................................
Charging Temperature .......................................................................................................
Cables ............................................................................................................................................
Battery Charging and Operating Power ...................................................................................
LED Charge Indications ...........................................................................................................
Charging Temperature .......................................................................................................
Trigger Handle ...............................................................................................................................
Inserting the MC67 into the Trigger Handle .............................................................................
Removing the MC67 ................................................................................................................
Scanning ..................................................................................................................................
10-1
10-1
10-3
10-3
10-4
10-4
10-4
10-5
10-5
10-5
10-6
10-6
10-6
10-6
10-7
10-7
10-7
10-7
10-8
10-8
10-8
10-9
10-9
10-10
10-10
10-10
10-11
10-11
10-12
10-12
10-12
10-12
10-13
10-13
10-14
10-14
10-15
10-15
10-15
10-15
Chapter 11: Maintenance & Troubleshooting
Introduction ....................................................................................................................................
Maintaining the MC67 ....................................................................................................................
Removing the Screen Protector .....................................................................................................
Battery Safety Guidelines ..............................................................................................................
Cleaning .........................................................................................................................................
Materials Required ...................................................................................................................
Cleaning the MC67 ..................................................................................................................
11-1
11-1
11-2
11-2
11-3
11-3
11-4
Table of Contents
Housing ..............................................................................................................................
Display ...............................................................................................................................
Scanner Exit Window .........................................................................................................
Connector ...........................................................................................................................
Cleaning Cradle Connectors ....................................................................................................
Cleaning Frequency .................................................................................................................
Troubleshooting .............................................................................................................................
MC67 .......................................................................................................................................
Single Slot USB Cradle ............................................................................................................
Four Slot Ethernet Cradle ........................................................................................................
Vehicle Cradle ..........................................................................................................................
Four Slot Battery Charger ........................................................................................................
Cables ......................................................................................................................................
Magnetic Stripe Reader ...........................................................................................................
11-4
11-4
11-4
11-4
11-4
11-5
11-5
11-5
11-8
11-9
11-9
11-10
11-10
11-11
Appendix A: Technical Specifications
MC67 ............................................................................................................................................. A-1
Appendix B: Keypads
Introduction ....................................................................................................................................
Numeric Keypad Configuration ................................................................................................
Alpha-numeric Keypad Configurations ....................................................................................
PIM Keypad Configuration .......................................................................................................
DSD Keypad Configuration ......................................................................................................
Special Character Key .............................................................................................................
Glossary
Index
xi
B-1
B-1
B-5
B-13
B-15
B-18
xii
MC67 User Guide
ABOUT THIS GUIDE
Introduction
This guide provides information about using the MC67 mobile computer and accessories.
NOTE Screens and windows pictured in this guide are samples and can differ from actual screens.
Documentation Set
The documentation set for the MC67 provides information for specific user needs, and includes:
• MC67 Quick Start Guide - describes how to get the MC67 up and running.
• MC67 User Guide - describes how to use the MC67.
• MC67 Integrator Guide - describes how to set up the MC67 and accessories.
• Enterprise Mobility Developer Kit (EMDK) Help File - provides API information for writing applications.
xiv
MC67 User Guide
Configurations
This guide covers the following configurations:
Radios
Display
Memory
Data
Capture
Options
Operating
System
MC67NA
WLAN: 802.11
a/b/g/n
WPAN: Bluetooth
v2.1 EDR
WWAN:GSM/UMTS
GPS: Stand-alone
GPS or
A-GPS
3.5” VGA
Color
512 MB RAM/
2 GB Flash
2D imager or
2D imager
and camera
Windows
Embedded
Handheld 6.5
Numeric,
QWERTY,
QWERTZ,
AZERTY, PIM
or DSD
MC67ND
WLAN: 802.11
a/b/g/n
WPAN: Bluetooth
v2.1 EDR
WWAN:GSM/UMTS
or 1XRTT/
CDMA
GPS: Stand-alone
GPS or
A-GPS
3.5” VGA
Color
1 GB RAM/
8 GB Flash
2D imager or
2D imager
and camera
Windows
Embedded
Handheld 6.5
Numeric,
QWERTY,
QWERTZ,
AZERTY or
DSD
Configuration
Keypads
Software Versions
This guide covers various software configurations and references are made to operating system or software
versions for:
• Adaptation Kit Update (AKU) version
• OEM version
• Fusion software
• Phone software.
AKU Version
To determine the Adaptation Kit Update (AKU) version:
Tap
> Settings > System > About > Version.
The second line lists the operating system version and the build number. The last part of the build number
represents the AKU number. For example, Build 29058.5.3.12.8 indicates that the device is running AKU
version 5.3.12.8.
OEM Version
To determine the OEM software version:
Tap
> Settings > System > System Info > System.
Fusion Software
To determine the Fusion software version:
About This Guide
Tap
xv
> Wireless Companion > Wireless Status > Versions.
Phone Software
To determine the Phone software version:
Press
>
> Phone information.
Chapter Descriptions
Topics covered in this guide are as follows:
• Chapter 1, Getting Started provides information on getting the MC67 up and running for the first time.
• Chapter 2, Using the MC67 provides basic instructions for using the MC67, including powering on and
resetting the MC67.
• Chapter 3, Data Capture provides instructions for capturing data.
• Chapter 4, Making Calls provides setup instructions for the MC67 phone.
• Chapter 5, Using WLAN provides information for connection the MC67 to a WLAN.
• Chapter 6, Messaging provides information for using Email, SMS and MMS messaging.
• Chapter 7, Bluetooth explains Bluetooth functionality on the MC67.
• Chapter 8, Using GPS Navigation provides information about GPS navigation with the MC67.
• Chapter 9, Settings provides basic instructions for using the MC67 phone.
• Chapter 10, Accessories describes the available accessories and how to use them with the MC67.
• Chapter 11, Maintenance & Troubleshooting includes instructions on cleaning and storing the MC67, and
provides troubleshooting solutions for potential problems during MC67 operation.
• Appendix A, Technical Specifications provides the technical specifications for the MC67.
• Appendix B, Keypads Provides information on the various keypad configuration.
Notational Conventions
The following conventions are used in this document:
• Mobile computer refers to the Motorola MC67 series of hand-held computers.
• Italics are used to highlight the following:
• Chapters and sections in this and related documents
• Icons on a screen.
• Bold text is used to highlight the following:
• Dialog box, window, and screen names
• Drop-down list and list box names
• Check box and radio button names
• Key names on a keypad
• Button names on a screen.
xvi
MC67 User Guide
• Bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential
• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
Related Documents
• MC67 Quick Start Guide, p/n 72-116172-xx.
• MC67 Regulatory Guide, p/n 72-116171-xx.
• MC67 Integrator Guide, p/n 72E-161698-xx.
• Mobility Services Platform User Guide, p/n 72E-100158-xx.
• Enterprise Mobility Developer Kits (EMDKs), available at: http://supportcentral.motorola.com.
• Latest ActiveSync or Windows Mobile Device Center software, available at: http://www.microsoft.com.
For the latest version of this guide and all guides, go to: http://supportcentral.motorola.com.
Service Information
If the user has a problem with the equipment, contact Motorola Solutions Global Customer Support in the
region. Contact information is available at: http://www.motorolasolutions.com/support.
When contacting support, please have the following information available:
• Serial number of the unit (found on manufacturing label)
• Model number or product name (found on manufacturing label)
• Software type and version number
• IMEI number.
Manufacturing label
Motorola Solutions responds to calls by email, telephone or fax within the time limits set forth in support
agreements.
About This Guide
xvii
If the problem cannot be solved by Motorola Solutions Global Customer Support, the user may need to return
the equipment for servicing and will be given specific directions. Motorola Solutions is not responsible for any
damages incurred during shipment if the approved shipping container is not used. Shipping the units
improperly can possibly void the warranty. Remove the SIM card and/or microSD card from the MC67 before
shipping for service.
If the device was purchased from a Motorola Solutions business partner, contact that business partner for
support.
xviii
MC67 User Guide
CHAPTER 1 GETTING STARTED
Introduction
This chapter lists the parts and accessories for the MC67 and explains how to set up the MC67 for the first
time.
Unpacking
Carefully remove all protective material from the MC67 and save the shipping container for later storage and
shipping.
Verify that the following were received:
• MC67 mobile computer
• 3600 mAh Lithium-ion battery
• stylus with tether (installed)
• Regulatory Guide
• Quick Start Guide.
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Motorola Solutions
Global Customer Support center immediately. See page xvi for contact information.
Prior to using the MC67 for the first time, remove the protective shipping film that covers the scan window,
display and camera window.
1-2
MC67 User Guide
Getting Started
To start using the MC67 for the first time:
1.
Install a micro secure digital (SD) card (optional)
2.
Install the subscriber identification module (SIM) card (GSM/UMTS only)
3.
Install the battery.
4.
Charge the MC67.
5.
Power on the MC67.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use.
CAUTION
Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper
ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
To install the microSD card:
1.
Remove the handstrap.
2.
Lift the rubber access door.
3.
Slide the SIM card holder door up to unlock.
4.
Lift the SIM card holder door.
Rubber access door
SIM card holder door
microSD card holder door
Figure 1-1 Lift SIM Slot Holder Door
5.
Lift the microSD card holder door.
6.
Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on
each side of the door.
Getting Started
1-3
microSD card
Holding tab
Figure 1-2 Insert microSD Card in Holder
7.
Close the card holder door and push down until it is securely in place.
8.
If installing a SIM card, proceed to Installing the SIM Card.
9.
Close the SIM card holder door and slide down until it locks into place.
10. Close the rubber access door.
Installing the SIM Card
NOTE GSM/UMTS networks only.
Global System for Mobile communications (GSM) phone service requires a SIM card. Obtain the card from a
service provider. The card fits into the MC67 and can contain the following information:
• Mobile phone service provider account details.
• Information regarding service access and preferences.
• Contact information, which can be moved to Contacts on the MC67.
• Any additional subscribed services.
NOTE For more information about SIM cards, refer to the service provider's documentation.
To install the SIM card:
1.
Lift rubber access door.
2.
Slide the SIM card holder up to unlock.
3.
Lift the SIM card holder door.
1-4
MC67 User Guide
Figure 1-3 Lifting the SIM Cover
4.
Insert the SIM card, as shown in Figure 1-4 ensuring that the card slides into the holding tabs on each side
of the door.
Figure 1-4 Inserting the SIM Card
5.
Close the SIM card holder door and slide down to lock into place.
6.
Close the rubber access door.
7.
Install the battery.
Installing the Battery
To install the battery.
1.
Insert the battery, bottom first, into the battery compartment in the back of the MC67.
2.
Press the battery down into the battery compartment until the battery release latch snaps (two clicks) into
place.
NOTE If the battery has significant charge, the MC67 turns on.
3.
Replace the handstrap.
Getting Started
1-5
Battery Release Latch
2
1
Battery
Figure 1-5 Inserting the Battery
Charging the Battery
CAUTION
Ensure to follow the guidelines for battery safety described in Battery Safety Guidelines on page 11-2.
Charging the Main Battery
Before using the MC67 for the first time, charge the main battery until the amber Charging/Battery Status light
emitting diode (LED) remains lit (see Table 1-1 on page 1-6 for charge status indications). To charge the MC67,
use a cable or a cradle with the appropriate power supply. For information about the accessories available for
the MC67, see Chapter 10, Accessories.
The MC67 is equipped with a backup battery which automatically charges from the fully-charged main battery.
When using the MC67 for the first time, the backup battery requires approximately 40 hours to fully charge.
This is also true any time the backup battery is discharged, which occurs when the main battery is removed for
several hours. The backup battery retains random access memory (RAM) data in memory for at least 15
minutes (at room temperature) when the MC67’s main battery is removed. When the MC67 reaches a very low
battery state, the combination of main battery and backup battery retains RAM data in memory for at least 36
hours.
For cable and cradle setup and charging procedures refer to the MC67 Integrator Guide.
• USB Charging Cable
• Charge Only Cable
• Single Slot USB Cradle
• Four Slot Charge Only Cradle
• Four Slot Ethernet Cradle.
1-6
MC67 User Guide
To charge the main battery:
1.
Connect the charging accessory to the appropriate power source.
2.
Insert the MC67 into a cradle or attach to a cable. The MC67 begins charging. The Charging/Battery Status
LED blinks amber while charging, then turns solid amber when fully charged. See Table 1-1 for charging
indications.
The 3600 mAh battery charges in less than six hours.
Table 1-1 LED Charge Indicators
Charging/Battery
Status LED
Indication
Off
MC67 is not charging.
MC67 is not inserted correctly in the cradle or connected to a power source.
Charger/cradle is not powered.
Slow Blinking Amber
(1 blink every 2 seconds)
MC67 is charging.
Solid Amber
Charging complete.
Note: When the battery is initially inserted in the MC67, the amber LED flashes
once if the battery power is low or the battery is not fully inserted.
Fast Blinking Amber
(2 blinks/second)
Charging error, e.g.:
• Temperature is too low or too high.
• Charging has gone on too long without completion (typically eight
hours).
Charging Spare Batteries
See Chapter 10, Accessories for information on using accessories to change spare batteries.
Charging Temperature
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). Note that charging is intelligently
controlled by the MC67.
To accomplish this, for small periods of time, the MC67 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC67 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See Table 1-1.
Powering On the MC67
NOTE If during installation of the battery, the battery has significant charge the MC67 turns on.
Press the Power button to turn on the MC67. The splash screen displays for about a minute as the MC67
initializes its flash file system, then the calibration window appears.
Getting Started
1-7
Calibrating the Screen
NOTE The Calibration screen can be accessed by pressing Blue key then Backspace key.
On the Personal Information Manager (PIM) keypad, tap
Settings > System > Screen > Align
Screen.
To calibrate the screen so the cursor on the touch screen aligns with the tip of the stylus:
1.
Remove the stylus from its holder on the side of the MC67.
2.
Carefully press and briefly hold the tip of stylus on the center of each target that appears on the screen.
3.
Repeat as the target moves around the screen, then tap the screen to continue.
Checking Battery Status
To check the charge status of the main battery in the MC67, tap
window.
> Settings > Power to display the Power
Replacing the Battery
CAUTION
The MC67 backup battery retains data for up to 15 minutes. Replace the battery within 15 minutes to
ensure that application states are maintained and that data is not lost.
1.
If the MC67 is in a cradle, remove it before performing a Safe Battery Swap.
2.
If the MC67 is in suspend mode, press the red Power button to wake the device.
3.
Press the red Power button. The Power Action Key window appears.
4.
Tap Safe Battery Swap. The Data Capture LED lights red.
5.
When the LED turns off, remove the handstrap.
6.
Slide the battery latch to the right. The battery ejects slightly.
Battery Latch
Figure 1-6 Removing the Battery
1-8
MC67 User Guide
7.
Lift the battery from the MC67.
8.
Insert the replacement battery, bottom first, into the battery compartment in the back of the MC67.
9.
Press the battery down until the battery release latch snaps (two clicks) into place.
10. Replace the handstrap.
Replacing the microSD Card
CAUTION
The MC67 backup battery retains data for up to 15 minutes. Replace the battery within 15 minutes to
ensure that application states are maintained and that data is not lost.
To replace an microSD card:
1.
If the MC67 is in a cradle, remove it before performing a Safe Battery Swap.
2.
If the MC67 is in suspend mode, press the red Power button to wake the device.
3.
Press the red Power button. The Power Action Key window appears.
4.
Tap Safe Battery Swap. The Data Capture LED lights red.
5.
When the LED turns off, remove the handstrap.
6.
Remove the battery.
7.
Lift the rubber access door.
8.
Slide SIM card holder door up to unlock.
9.
Lift SIM Card holder door.
10. Lift the microSD card holder door.
11. Remove microSD card from holder.
12. Close microSD card holder door.
13. Close SIM card holder door.
14. Slide SIM card holder door down to lock into place.
15. Close the rubber access door.
16. Insert the battery, bottom first, into the battery compartment in the back of the MC67.
17. Press the battery down until the battery release latch snaps (two clicks) into place.
18. Replace the handstrap.
19. If a SIM card is installed, warm boot the MC67. See Resetting the MC67 on page 2-12.
Replacing the SIM Card
CAUTION
The MC67 backup battery retains data for up to 15 minutes. Replace the battery within 15 minutes to
ensure that application states are maintained and that data is not lost.
Getting Started
1-9
To replace a SIM card:
1.
If the MC67 is in a cradle, remove it before performing a Safe Battery Swap.
2.
If the MC67 is in suspend mode, press the red Power button to wake the device.
3.
Press the red Power button. The Power Action Key window appears.
4.
Tap Safe Battery Swap. The Data Capture LED lights red.
5.
When the LED turns off, remove the handstrap.
6.
Remove the battery.
7.
Lift the rubber access door.
8.
Slide SIM card holder door up to unlock.
9.
Lift the SIM Card holder door.
10. Remove SIM card from holder.
11. Close SIM card holder door.
12. Slide SIM card holder door down to lock into place.
13. Close the rubber access door.
14. Insert the battery, bottom first, into the battery compartment in the back of the MC67.
15. Press the battery down until the battery release latch snaps (two clicks) into place.
16. Replace the handstrap.
17. Warm boot the MC67. See Resetting the MC67 on page 2-12.
Battery Management
Observe the following battery saving tips:
• Leave the MC67 connected to AC power at all times when not in use.
• Set the MC67 to turn off after a short period of non-use.
• Set the backlight to turn off after a short period of non-use.
• Turn off all wireless activities when not in use.
Changing the Power Settings
To set the MC67 to turn off after a short period of non-use:
1.
Tap
> Setting > System > Power.
2.
Tap the Advanced tab.
3.
Select the On battery power: Turn off device if not used for check box and select a value from the
drop-down list.
4.
Select OK.
1 - 10 MC67 User Guide
Changing the Backlight Settings
To change the backlight settings in order to conserve more battery power:
1.
Tap
> Settings > System > Backlight > Battery Power.
2.
Select the Disable backlight if device is not used for check box and select a value from the drop-down
list.
3.
Select the Brightness tab.
4.
Tap the Disable backlight check box to turn off the display backlight, or use the slider to set a low value
for the backlight.
5.
Select OK.
Changing the Keypad Backlight Settings
To change the keypad backlight settings in order to conserve more battery power:
1.
Tap
> Settings > System > Keylight > Battery Power.
2.
Select the On battery power: Disable keylight if device if not used for check box and select a value
from the drop-down list.
3.
Select the Advanced tab.
4.
Tap the Disable keylight check box to turn off the keypad backlight.
5.
Select OK.
Turning Off the Radios
The MC67 includes Wireless Manager, which provides a simple method of enabling, disabling, and
configuring all the MC67’s wireless capabilities.
To open Wireless Manager, tap
> Settings > Connections > Wireless Manager.
• Tap All to toggle all the radios on or off.
• Tap Phone to toggle the phone radio on or off.
• Tap Wi-Fi to toggle the wireless local area network (WLAN) radio on or off.
• Tap Bluetooth to toggle the Bluetooth radio on or off.
Network Activation
Network activation is dependent upon the network type. When an GSM/UTMS SIM card is installed in the
MC67ND, upon startup the MC67ND is configured for the GSM/UTMS network.
Activating an MC67ND on a CDMA Network
To activate on a CDMA network:
1.
Setup an account with the CDMA carrier. Provide the MEID number (located under the battery of the
MC67ND) to the customer service representative.
Getting Started 1 - 11
2.
Tap Start > Settings > Connections > Network Setup & Activation. The Network Setup & Activation
window displays.
Figure 1-7 Network Setup and Activation Setup Window
3.
Tap Switch to CDMA.
4.
The window closes.
5.
Tap Network Setup & Activation.
6.
Tap Activation. The CDMA Activation window appears.
7.
Tap Start Activation and PRL Update.
8.
Follow the on-screen instructions.
For detailed information for configuring the phone and activating on a different network, refer to the MC67
Integrator Guide.
Switching from CDMA to GSM/UMTS
To switch from a CDMA network to a GSM/UTMAS network:
1.
Tap Start > Settings > Connections > Network Setup & Activation. The Network & Activation window
appears.
Figure 1-8 Network Setup and Activation Setup Window
2.
Tap Switch to GSNM/UTMS.
1 - 12 MC67 User Guide
3.
The window closes.
4.
Tap Network Setup & Activation.
NOTE Switching radio bands may not be available on all networks.
5.
In the GSM/UMTS Settings drop-down list, select connection type. Options:
a.
Auto (GSM&UTMS)
b.
GSM Only
c.
UMTS Only.
6.
Tap Apply GSM/UMTS Settings.
7.
Tap OK.
Switching from GSM/UTMS to CDMA
1.
Tap Start > Settings > Connections > Network Setup & Activation. The Network & Activation window
appears.
2.
Tap Switch to CDMA.
3.
The window closes.
CHAPTER 2 USING THE MC67
Introduction
This chapter explains the buttons, status icons, and controls on the MC67, and provides basic instructions for
using the MC67, including resetting the MC67 and entering data.
Features
Touch Screen with
Protective Overlay
Data Capture
LED
Charging/Battery
Status LED
WAN Radio
Status LED
Scan/Action
Button
Volume
Up/Down Button
Scan Button
Keypad
(Alpha-Numeric Keypad Shown)
Microphone
Power Button
I/O Connector
Figure 2-1 MC67 Front View
2-2
MC67 User Guide
Battery
Battery Latch
Speaker
Camera Flash
Handstrap
Camera
Stylus
Stylus Clip
Action Button
Scan/Action Button
Exit Window
Figure 2-2 MC67 Rear View
LED Indicators
The MC67 has three light emitting diode (LED) indicators. The Data Capture LED indicates status for scanning.
The Charging/Battery Status LED indicates battery charging and status.The Radio Status LED indicates Wide
Area Network (WAN) radio status. Table 2-1 describes the LED indications.
Data Capture
LED
Charging/Battery
Status LED
WAN Radio
Status LED
Figure 2-3 LED Indicators
Table 2-1 LED Indications
LED State
Indication
Data Capture LED
Solid Green
Successful decode/capture.
Solid Red
Data capture in process.
Using the MC67
2-3
Table 2-1 LED Indications (Continued)
LED State
Indication
Flashing Green
Software initiated notification.
Solid Red (after Safe Battery Swap mode)
MC67 is shutting down for battery replacement.
Off
Data capture not enabled.
Charging/Battery Status LED
Slow Blinking Amber
Main battery in MC67 is charging.
Solid Amber
Main battery in MC67 is fully charged.
Fast Blinking Amber
Charging error.
Off
MC67 not charging.
WAN Radio Status LED
Slow Blinking Green
RF (WAN) radio is on.
Off
RF (WAN) radio is off.
NOTE For information about scanning/decoding, see Chapter 3, Data Capture. For information about WAN
radio status and settings, see Chapter 4, Making Calls, or refer to the MC67 Integrator Guide.
Keypads
The MC67 offers six keypad configurations: Numeric, QWERTY, AZERTY, QWERTZ, Direct Store Delivery
(DSD) and Personal Information Manager (PIM).
Figure 2-4 MC67 Numeric Keypad
Refer to Appendix B, Keypads for detailed information on the keypad configurations.
2-4
MC67 User Guide
Finger Scrolling
Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list,
file list, message list, calendar appointments list, and more.
When finger scrolling, swipe or flick a finger on the screen.
To scroll down, swipe a finger upward on the screen. To scroll up, swipe a finger downward on the screen.
To auto-scroll, flick a finger upward or downward on the screen. Touch the screen to stop scrolling.
Home Screen
The default home screen on the MC67 is the Windows Embedded Handheld Home screen. The Home screen
contains a Status Bar at the top of the screen and a Tile Bar at the bottom of the screen.
The Home screen is scrollable and contains a list of application plug-ins and an Information Status bar. The
Information Status bar highlights the application plug-in that is under it and provides additional information.
Status Bar
Home Screen
Tile Bar
Open the Start Menu
Tiles
Figure 2-5 Windows Embedded Handheld Home Screen
Touch and hold the screen with a finger and move the Home screen up and down. As the application names
move under the Information Status bar, information relevant to that application appear in the bar.
Using the MC67
2-5
Figure 2-6 Moving Today Screen
Also touch and hold the Information Status bar and move it up and down over an application name. Remove
finger and the Information Status bar and application name center in the screen.
Figure 2-7 Moving Information Status Bar
Application Icon
Application Information
Figure 2-8 Information Bar Example
To customize the Home screen, tap
> Settings > Today. On the horizontal scroll, use Appearance to
customize the background and the Items to change the display format.
2-6
MC67 User Guide
Classic Today Screen
The user can change to the classic Today screen layout that is used in Windows Mobile 6.1.
Status Bar
Today Screen
Task Tray
Tile Bar
Figure 2-9 Classic Today Screen
To change to the classic view tap
> Settings > Home > Items.
Figure 2-10 Home Screen Settings
Deselect the Windows Default checkbox and select any of the other checkboxes.
Tap
.
The task bar at the bottom of the screen can contain the task tray icons listed in Table 2-2.
Using the MC67
2-7
Table 2-2 Task Tray Icons
Icon
Name
Description
Wireless connection
status
Wireless connection status icon. Indicates wireless local area network
(WLAN) signal strength and opens the Wireless Applications menu.
Bluetooth Enabled
The Bluetooth Enabled icon appears in the task tray and indicates that the
Bluetooth radio is on (Displays only if the StoneStreet One Bluetooth stack
is enabled).
Bluetooth Disabled
The Bluetooth Disabled icon appears in the task tray and indicates that the
Bluetooth radio is off (Displays only if the StoneStreet One Bluetooth stack
is enabled).
Bluetooth
Communication
The Bluetooth Communication icon appears in the task tray and indicates
that the mobile computer is communicating with another Bluetooth device
(Displays only if the StoneStreet One Bluetooth stack is enabled).
Status Bar
The Status Bar at the top of the screen displays the status icons listed in Table 2-3.
Notifications
Connectivity
WAN
Audio
Battery
Clock
Figure 2-11 Status Bar Icons
Table 2-3 Status Bar Icons
Icon
Description
Icon
Description
Notifications
Reminder of an upcoming calendar event.
One or more instant messages were received.
One or more text messages were received.
One or more voice messages were received.
There are more notification icons than can be
displayed.
Bluetooth radio is on.
One or more Email messages were received.
Microsoft customer feedback alert.
Backup battery is low.
2-8
MC67 User Guide
Table 2-3 Status Bar Icons (Continued)
Icon
Description
Icon
Description
Connectivity
Connection is active.
Connection is not active.
Synchronization is occurring.
wireless fidelity (Wi-Fi) available.
Wi-Fi in use.
HSPA+ available.
3G available.
GPRS available.
EGPRS available.
Roaming.
Call missed.
Dialing while no SIM card is installed.
Call in progress.
Calls are forwarded.
Call on hold.
Speakerphone is on.
Phone on/good signal.
Phone off.
No WAN service.
Searching for WAN service.
Evolved High-Speed Packet Access (HSPA+)
connecting.
HSPA+ in use.
3G in use.
3G connecting.
General Packet Radio Service (GPRS) in use.
GPRS connecting.
Enhanced General Packet Radio Service
(EGPRS) in use.
EGPRS connecting.
WAN
Subscriber identification module (SIM) Card
not installed.
Audio
All sounds are on.
All sounds are off.
Vibrate is on.
Battery
Battery is charging.
Battery has a full charge.
Battery has a high charge.
Battery has a medium charge.
Battery has a low charge.
Battery has a very low charge.
Tap the Status Bar to display an icon bar. Tap an icon to get additional notification or status information.
Using the MC67
Icon Bar
Figure 2-12 Icon Bar
Table 2-4 Task Tray Icons
Icon
Name
Description
Magnify
Enlarges the screen.
Voicemail
Dials Voicemail.
Missed Call
Opens the Call History window and displays a list of missed calls.
Low Backup Battery
Indicates that the backup battery is low.
Notifications
Indicates that notifications are available.
Headset
Indicates that a wireless stereo headset is connected to the MC67.
Connectivity
Displays the Connectivity dialog box.
Phone Data
Displays the Phone dialog box.
Volume
Displays the Volume dialog box.
Power
Displays the Power window.
Clock & Alarms
Opens the Clocks & Alarms window.
2-9
2 - 10 MC67 User Guide
Tile Bar
The Tile Bar, located at the bottom of the screen, contains the Start tile
displays tiles that vary depending upon the open application.
to open the Start Menu. It also
Figure 2-13 Tile Bar Examples
Table 2-5 Programs Available on the Start Menu
Icon
Description
Icon
Description
Home - Closes the Start menu and displays
the Home screen.
Text - Send an text message.
Phone - Make calls.
E-mail - Send an Email.
Contacts - Keep track of friends and
colleagues.
Battery Swap - Properly shuts down the
MC67 during battery replacement.
Internet Explorer - Browse Web sites as
well as download new programs and files
from the Internet.
Settings - Opens the Settings folder. See
Chapter 9, Settings for more information.
Calendar - Keep track of appointments and
create meeting requests.
Getting Started - Launch the Getting
Started application.
Pictures & Videos - View and manage
pictures and video files.
Alarms - Set the clock to the date and time
of the current location. Alarms can also be
set at specified days and times of a week.
Windows Media - Play back audio and
video files.
Messenger - Use the mobile version of
Windows Live Messenger.
Marketplace - Purchase applications from
the Marketplace.
MSN Weather - Check the local weather.
MSN Money - Keep track of finances.
Windows Live - Use the mobile version of
Windows Live™ to find information on the
web.
Calculator - Perform basic arithmetic and
calculations, such as addition, subtraction,
multiplication, and division.
Notes - Create handwritten or typed notes,
drawings, and voice recordings.
Games - Play games.
Tasks - Keep track of tasks.
Using the MC67 2 - 11
Table 2-5 Programs Available on the Start Menu (Continued)
Icon
Description
Icon
Description
ActiveSync - Synchronize information
between the MC67 and a host computer or
the Exchange Server.
File Explorer - Organize and manage files
on the device.
Internet Sharing - Connect a notebook
computer to the Internet using the MC67's
data connection.
Search Phone - Search contacts, data, and
other information on the MC67. Refer to the
Microsoft Applications for Windows Mobile 6
User Guide for more information.
Task Manager - Enables viewing of memory
and central processing unit (CPU)
allocations and stops running processes.
Help - Access on-line Help topics.
Wireless Companion - Opens the Wireless
Companion folder.
Office Mobile 2010 - Provides access to
Excel Mobile, PowerPoint Mobile, OneNote
Mobile, SharePoint WorkSpace Mobile and
Word Mobile applications.
Adobe Reader - View pdf files.
BTScanner CtlPanel - Set com port to use
with a Bluetooth scanner.
BTExplorer - Manages StoneStreet One
Bluetooth connections. See Chapter 7,
Bluetooth for more information. Appears
only if the StoneStreet One Bluetooth stack
is enabled.
DEMO - Provides a web link to install
Motorola’s featured demos for the MC67.
After installation, launches the demo
application.
MSP Agent - Enables management of the
MC67 from an Mobility Services Platform
(MSP) Server. Requires the purchase of an
appropriate MSP client license per device to
suit the level of management functionality
required.
MotoBTUI - Use to set Bluetooth options
and configuration.
Rapid Deployment Client - Allows the
MC67 user to stage a device for initial use by
initiating the deployment of settings,
firmware, and software. Requires the
purchase of an Mobility Services Platform
(MSP) client license per device.
RTlogEvent - Use when instructed by
Motorola Solutions support personnel.
Remote Desktop Mobile - Log onto
Windows NT server type computers and use
all of the programs that are available on that
computer from the MC67.
SIM ToolKit - Manage the contacts that are
stored on the SIM card. Copy SIM contents
to Contacts ion the device.
SMS Staging - Receives and processes
SMS messages from an MSP Server and
allows the user to stage an MC67 based on
them. Requires the purchase of an MSP
client license per device.
2 - 12 MC67 User Guide
Adjusting Volume
To adjust the system volume:
1.
Press the volume buttons on the right side of the MC67 to increase and decrease the system volume. The
Volume dialog box appears.
2.
As the user increases or decreases the volume, the slider moves accordingly. The user can also move the
slider to adjust the volume.
3.
Select the Vibrate radio button to turn off the system audio and enable the MC67 to vibrate upon system
notifications.
4.
Select Off radio button to turn off all system audio notifications.
Resetting the MC67
There are two reset functions, warm boot and cold boot. A warm boot restarts the MC67 by closing all running
programs. A cold boot also restarts the MC67, and also initializes some drivers. Data saved in flash memory or
a memory card is not lost.
If the MC67 is not functioning properly, perform a warm boot first. If the MC67 still does not respond, perform a
cold boot.
Performing a Warm Boot
Hold down the red Power button for approximately five seconds. As soon as the MC67 starts to boot (splash
screen displays) release the Power button.
Performing a Cold Boot
To perform a cold boot:
• On a numeric or DSD keypad, simultaneously press the red Power button and the
• On an alphanumeric keypad, simultaneously press the red Power button and the
• On an PIM keypad, simultaneously press the red Power button and the
and
and
and
keys.
keys.
keys.
Locking the MC67
Locking the MC67 turns off keyboard and touch screen functionality. This is helpful when the MC67 is turned
on and to prevent accidental key presses.
To lock the MC67, tap
>
.
To unlock the MC67, side the Lock button to the left or right.
Using the MC67 2 - 13
Figure 2-14 Unlock Device Window
If the MC67 was locked with a PIN or password, a prompt appears.
Un-locking with Simple PIN
When the MC67 is locked, the Lock screen appears.
Figure 2-15 Simple PIN Lock Screen
Enter the password to un-lock the device.
Tap the Unlock button to unlock the device and go to the Home screen, or tap the Contact button to unlock the
device and go to the Contacts window or tap the Email button to unlock the device and go to the Messaging
window.
Un-locking with Strong Password
When the MC67 is locked, the Lock screen appears.
2 - 14 MC67 User Guide
Figure 2-16 Strong Password Lock Screen
Enter the strong password and then tap Unlock.
NOTE If the user enters an incorrect password eight times, the user is requested to enter a code before trying
again.
If the user forgets the password, contact the system administrator.
Battery Status Indications
Battery icons appear on the Status bar indicating the battery power level. When the main battery power falls
below a predetermined level the icon indicates the status and a battery dialog box appears indicating the status
of the battery. When the backup battery is low an icon appears in the Status bar and a battery dialog box
appears indicating the status of the backup battery.
Figure 2-17 Battery Status Dialog Boxes
The Battery icon always appears in the Status bar. The icon indicates the battery power level. The message
displays until the Dismiss button is pressed.
Also view the battery status using the Power window. Either:
• Tap the Status bar and then the Battery icon.
• Tap
> Settings > System > Power.
Using the MC67 2 - 15
Figure 2-18 Settings Power Window
Battery Reserve Options
If the charge of the battery reaches a critical threshold, the MC67 shuts down. This threshold can be changed
but affects the amount of time that data can be retained.
1.
Tap
> Settings > System > Power > RunTime. A warning message appears.
Figure 2-19 Warning Message
2.
Read the warning message and tap OK.
Figure 2-20 RunTime Tab
2 - 16 MC67 User Guide
3.
Select one of the Battery Reserve Options.
• Option 1: Minimum - After a low battery shutdown, data will be retained for minimum amount of time.
Battery should be replaced immediately to avoid data loss.
• Option 2: Less - After a low battery shutdown, data will be retained for less than normal amount of time.
• Option 3: Normal - After a low battery shutdown, data will be retained for maximum amount of time.
4.
Tap OK.
Main Battery Temperature Notifications
The temperature notification system implements three levels of notification when the temperature within the
battery exceeds specific temperature thresholds:
• Level 1: Temperature Watch; this level is similar to main battery low warning. It indicates that the
battery temperature has reached the first threshold level. The user should move to an environment within
proper operating temperature.
• Level 2: Temperature Warning; this level is similar to main battery very low warning. It indicates the
battery temperature has reached the second threshold level. The user should close all running
applications and stop using the MC67.
• Level 3: Temperature Error; this level indicates the battery has reached an unusable temperature
threshold and immediately suspends the MC67. This level does not have any graphical notification
associated with it.
Figure 2-21 Main Battery Temperature Watch Dialog Box
Figure 2-22 Main Battery Temperature Warning Dialog Box
Using the MC67 2 - 17
NOTE The Temperature Warning dialog box remains visible until the user taps Hide.
Interactive Sensor Technology
The Interactive Sensor Technology (IST) supports the following features:
• Power Management – manages power by configuring IST to control switching on/off the backlight,
control suspend mode of the MC67 by monitoring motion and orientation.
• Display Orientation – switches the screen orientation to either landscape or portrait depending on the
MC67 orientation.
• Free Fall Detection – monitors free fall duration and records the time and type of the drop event.
The MC67 is equipped with sophisticated and powerful sensors to sense and react to environmental changes,
motion, orientation and user input. These sensors include accelerometer, magnetometer, gyroscope, ambient
light sensor, near range sensor, temperature sensor and proximity sensor.
The accelerometer and gyroscope measure the linear acceleration and angular velocity. The magnetometer
measures the magnetic field intensity experienced by the MC67. This information can be used to derive the
motion state and the orientation of the device. For example, an MC67 can automatically rotate the display from
portrait to landscape mode to match the device orientation, enter suspend mode or switch off backlight to save
power when display is placed face down.
The ambient light sensor detects the intensity of light on or around the display screen. The MC67 can adjust
the screen brightness for optimum visibility while conserving power.
The near range proximity sensor detects any object in close proximity to device. This information can be used
to disable the touch pad when the caller's face is close to the device to prevent unintended key press.
See IST Settings on page 9-8 for more information.
Power Management
The MC67 orientation and motion sensitive data can be used as an indicator of MC67 usage and can be used
to manage the battery power of the mobile computer. For example, IST can be configured to control the
backlight on and off functionality or go into suspend according to a user gesture by placing screen facing down.
It can also be used to keep the MC67 active while it is in movement to prevent it from quickly going into
suspend mode while in use.
Display Orientation
The screen can be rotated between portrait and landscape modes automatically, depending on the physical
orientation of the MC67. For example, if the MC67 is rotated 90° counterclockwise, IST rotates the display
counterclockwise 90° so that the screen display appears correct.
This functionality is achieved by monitoring screen angle and rotating the display to counter any changes. IST
only rotates the screen in multiples of 90°.
Free Fall Detection
IST continuously monitors gravitational force on the MC67 according to its current position. When the MC67
free falls, IST detects the absence of gravitational force and records the event data if it detects a free fall more
2 - 18 MC67 User Guide
than 450 ms, which may indicates nearly a one meter drop. This data can be used as an indicator of potential
abuse or misuse.
IST features a log for recording the free fall events. This log records the date, time and the time period of the
free fall.
Stylus
Use the MC67 stylus to select items and enter information. The stylus functions as a mouse.
• Tap: Touch the screen once with the stylus to press option buttons and open menu items.
• Tap and Hold: Tap and hold the stylus on an item to see a list of actions available for that item. On the
pop-up menu that appears, tap the action to perform.
• Drag: Hold the stylus on the screen and drag across the screen to select text and images. Drag in a list to
select multiple items.
CAUTION
To prevent damage to the screen, do not use any device other than the Motorola-provided stylus.
Entering Data
When entering data on the keypad, use either the single-hand method or the two-hand method as shown in
Figure 2-23.
Single-hand Method
Figure 2-23 Entering Data on the Keypad
Two-hand Method
Using the MC67 2 - 19
Using Voice-Over-IP
The MC67 supports Voice over IP over WLAN (VoWLAN) using third party voice clients. The MC67 can
communicate using VoIP either using the MC67 supports several audio outputs, including back speaker phone,
front receiver or handset, and Bluetooth headset.
It is recommended that the wireless network use the 802.11a (5 GHz) band for voice applications. Using the 5
GHz band avoids some noise sources that may occur on the 802.11b/g (2.4 GHz) band due to wireless
interference.
When using a Bluetooth headset with the MC67 and VoWLAN, it is required to use the Bluetooth Headset
profile instead of Hands-free profile. Use the buttons on the MC67 to answer and end calls. See Chapter 7,
Bluetooth for information on setting up a Bluetooth Headset Profile.
2 - 20 MC67 User Guide
CHAPTER 3 DATA CAPTURE
Introduction
The MC67 offers three types of data capture options:
• Imaging
• Digital camera.
Imaging
The MC67 with an integrated imager has the following features:
• Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal,
PDF417, and 2D matrix code types.
• The ability to capture and download images to a host for a variety of imaging applications.
• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.
The imager uses imaging technology to take a picture of a bar code, stores the resulting image in its memory,
and executes state-of-the-art software decoding algorithms to extract the bar code data from the image.
Operational Modes
The MC67 with an integrated imager supports three modes of operation, listed below. Activate each mode by
pressing the Scan button.
• Decode Mode: In this mode, the MC67 attempts to locate and decode enabled bar codes within its field
of view. The imager remains in this mode as long as the user holds the scan button, or until it decodes a
bar code.
NOTE To enable Pick List Mode, configure in DataWedge or set in an application using a API command.
• Pick List Mode: This mode allows the user to selectively decode a bar code when more than one bar
code is in the MC67’s field of view. To accomplish this, move the aiming crosshair or dot over the
3-2
MC67 User Guide
required bar code to decode only this bar code. This feature is ideal for pick lists containing multiple bar
codes and manufacturing or transport labels containing more than one bar code type (either 1D or 2D).
• Image Capture Mode: Use this mode to capture an image within the MC67’s field of view. This is useful
for capturing signatures or images of items like damaged boxes.
Digital Camera
The MC67 with an integrated camera based bar code scanning solution has the following features:
• Omnidirectional reading of a variety of bar code symbologies, including the most popular linear, postal,
PDF417, and 2D matrix code types.
• Advanced intuitive aiming for easy point-and-shoot operation
• Taking photos and recording videos.
The solution uses the advanced camera technology to take a digital picture of a bar code, and executes
state-of-the-art software decoding algorithms to extract the data from the image.
Scanning Considerations
Typically, scanning is a simple matter of aim, scan, and decode and a few quick trial efforts master it. However,
consider the following to optimize scanning performance:
• Range
Any scanning device decodes well over a particular working range — minimum and maximum distances
from the bar code. This range varies according to bar code density and scanning device optics.
Scanning within range brings quick and constant decodes; scanning too close or too far away prevents
decodes. Move the scanner closer and further away to find the right working range for the bar codes
being scanned.
• Angle
Scanning angle is important for promoting quick decodes. When laser beams reflect directly back into the
scanner from the bar code, this specular reflection can “blind” the scanner.
To avoid this, scan the bar code so that the beam does not bounce directly back. But don’t scan at too
sharp an angle; the scanner needs to collect scattered reflections from the scan to make a successful
decode. Practice quickly shows what tolerances to work within.
• Hold the MC67 farther away for larger symbols.
• Move the MC67 closer for symbols with bars that are close together.
NOTE Scanning procedures depend on the application and MC67 configuration. An application may use
different scanning procedures from the one listed above.
Imager Scanning
To read a bar code, a scan-enabled application is required. The MC67 contains the DataWedge application
that allows the user to enable the imager, decode the bar code data and display the bar code content.
1.
Enable DataWedge. See Enable DataWedge on page 3-4.
Data Capture
2.
Launch an application that supports text inputs, such as Word Mobile 2010 or Excel Mobile 2010.
3.
Point the exit window on the top of the MC67 at a bar code.
3-3
Figure 3-1 Imager Scanning
4.
Press and hold the scan button.
The red laser aiming pattern turns on to assist in aiming. Ensure the bar code is within the area formed by
the crosshairs in the aiming pattern. The aiming dot is used for increased visibility in bright lighting
conditions.
The Scan/Decode LED lights red to indicate that scanning is in process, then lights green and a beep
sounds, by default, to indicate the bar code was decoded successfully. Note that when the MC67 is in Pick
List Mode, the imager does not decode the bar code until the crosshair or aiming dot touches the bar code.
Correct
Incorrect
Figure 3-2 Aiming Pattern
Decoded
Not Decoded
Figure 3-3 Pick List Mode with Multiple Bar Codes in Aiming Pattern
5.
Release the scan button.
NOTE Imager decoding usually occurs instantaneously. The MC67 repeats the steps required to take a digital
picture (image) of a poor or difficult bar code as long as the scan button remains pressed.
6.
Disable DataWedge. See Disable DataWedge on page 3-5.
3-4
MC67 User Guide
Digital Camera Scanning
To read a bar code, a scan-enabled application is required. The MC67 contains the DataWedge application
that allows the user to enable the camera, decode the bar code data and display the bar code content.
1.
Enable DataWedge. See Enable DataWedge on page 3-4.
2.
Launch an application that supports text inputs, such as Word Mobile 2010 or Excel Mobile 2010.
3.
Point the camera lens on the back of the MC67 at a bar code.
Figure 3-4 Camera Scanning
4.
Press and hold
. A preview window appears on the display window and a red aiming line emits from the
MC67. The Data Capture LED lights red indicating that the data capture is in process.
5.
Move the MC67 until the red aiming line is across the bar code.
6.
The light emitting diode (LED) lights green and a beep sounds, by default, to indicate the bar code was
decoded successfully.
7.
The bar code content data displays in the text field.
DataWedge
Enable DataWedge
To enable DataWedge:
1.
Tap
> Settings > System > DataWedge.
2.
Tap Basic configuration.
3.
Tap 1. Barcode input.
4.
Tap one of the following:
a.
1. Block Buster Imager (for scanning using the imager).
b.
2. Camera Scanner Driver (for scanning using the camera).
c.
3. Bluetooth SSI Scanner Driver (for scanning using the RS507, see Using the RS507 Hands-free
Imager on page 10-19).
Data Capture
5.
Ensure that a check mark is next to 1. Enabled. If not, tap 1. Enabled.
6.
Tap 0. Back.
7.
Tap 0. Back.
8.
Tap 0. Exit and then tap OK.
9.
Tap Running to start the DataWedge process. The DataWedge Status changes to Ready.
3-5
10. Tap OK.
Disable DataWedge
To disable DataWedge:
1.
Tap
> Settings > System > DataWedge.
2.
Tap the Running option to end the DataWedge process. The DataWedge Status changes to Stopped.
3.
Tap OK.
Taking Pictures
To take a picture:
1.
Tap
> Pictures & Videos.
2.
Tap Camera.
Figure 3-5 Camera Window
The Camera window displays the view finder. Information about the current settings or the remaining
number of pictures that can be saved to the MC67 are displayed on the lower right corner of the screen.
3.
Check the image on the view finder, adjust if necessary.
4.
Press the Enter key to take the picture.
Burst Mode
Burst mode is a way to take a series of quick pictures.
3-6
MC67 User Guide
1.
Tap
> Pictures & Videos.
2.
Tap Camera.
3.
Tap Menu > Mode > Burst.
4.
Check the image on the view finder, adjust if necessary.
5.
Press the Enter key to take the picture.
To stop a burst of pictures before all pictures have been taken tap OK.
Timer Mode
To take pictures using the timer:
1.
Tap
> Pictures & Videos.
2.
Tap Camera.
3.
Tap Menu > Mode > Timer.
NOTE By default, the self timer delay is set at five seconds.
4.
Check the image on the view finder, adjust if necessary.
5.
Press the Enter key to take the picture.
Editing Pictures
Rotate, crop, zoom, and adjust the brightness and color contrast pictures.
1.
Tap
> Pictures & Videos.
2.
Tap the thumbnail of the picture to view.
3.
Tap Menu > Zoom to display the Zoom panel, used to zoom in or out of a picture. Tap Menu > Zoom again
to close the Zoom panel.
4.
To rotate a picture 90 degrees counter-clockwise, tap Menu > Edit, then tap Rotate.
5.
To crop a picture, tap Menu > Edit, then tap Menu > Crop. Drag the stylus across the screen to select the
crop area. Tap inside the area to crop the picture, or outside of the area to cancel cropping.
Setting a Picture as Wallpaper
To add a custom look to the Home screen of the MC67 (using the Windows Home screen); apply a wallpaper
using any image. To set an image as a Home wallpaper:
1.
Tap and hold a thumbnail, then select Set as Home Background.
2.
Tap the up or down arrows to set the transparency level.
3.
Tap OK.
Camera Configuration
To configure the camera settings:
Data Capture
1.
Tap
2.
Tap Menu, then configure the device settings.
3-7
> Pictures & Videos.
• Video - Tap to switch to video mode.
• Mode - Select from the following modes to take the picture:
Normal - Takes picture using the default settings.
Burst - Takes picture consecutively in continuous mode.
• Timer - Takes picture five seconds after pressing the Enter key.
•
•
• Brightness - Set the camera brightness level.
• Resolution - Set the camera resolution level. Note that selecting a high resolution picture increases the
size of the file significantly.
• Flash - Turns flash on and off.
• Auto Focus - Turns auto focus on and off.
• Full Screen - Toggles the viewfinder between full screen and window modes.
• Options - Displays the camera options window.
3.
Tap OK to exit.
Recording a Video
To record a video:
1.
Tap
> Pictures & Videos.
2.
Tap Camera.
3.
Tap Menu > Video.
Figure 3-6 Video Window
The available recording time displays on the screen.
NOTE By default, the time limit for recording videos is set to 30 seconds.
4.
Press the Enter key to begin recording.
3-8
MC67 User Guide
5.
Press the Enter key to stop recording.
Video Configuration
To configure the video settings:
1.
Launch the Video application.
2.
Tap Menu, then configure the device settings.
• Still - Tap to switch to still (camera) mode.
• Brightness - Set the video brightness level.
• Quality - Set the quality (video resolution and sound fidelity) and size of the video clips. Video clips of
higher quality require more memory.
• Full Screen - Toggles the viewfinder between full screen and window modes.
• Options - Displays the video options window.
3.
Tap OK to exit.
Viewing Pictures and Videos
To view a picture or video:
1.
Tap
> Pictures & Videos.
2.
Tap the thumbnail of the picture or video:
• Tap the Show drop-down list to browse folders.
• Tap the Sort By drop-down list to sort the files by name, date or size.
Figure 3-7 Pictures & Videos
Customizing Pictures & Videos
Using the Options command to set preference settings on how to use Pictures & Videos.
To customize Pictures & Videos:
1.
On either thumbnail or full screen mode, tap Menu > Options.
Data Capture
2.
3-9
On the General tab, set the following options:
• Select the size of the pictures to send through e-mail. Only pictures sent through an e-mail message is
resized, the original picture remains unchanged.
• Resize pictures for faster e-mail transfer.
• Rotate pictures towards left or right.
3.
On the Slide Show tab, set the following options:
• Select the Portrait pictures or Landscape pictures radio button to set slide show orientation.
• Select the Play a screen saver when connected to my PC and idle for 2 minutes check box to set
the image files in the My Pictures folder as a screen saver whenever the device is connected to the
USB sync cable and is idle for 2 minutes.
4.
On the Camera tab, set the following options:
• In the Type filename prefix text box, enter the prefix to be used as a default title for the image file.
• In the Save files to drop-down list, select to save image files to onboard memory or built-in storage.
• In the Still image compression level drop-down list, set a compression level when saving the image.
The high quality setting provides the best image quality but more memory is required.
5.
On the Video tab, set the following options:
• Select the Include audio when recording video files check box to record audio along with video.
• In the Time limit for videos drop-down list, set the amount of time for recording video.
3 - 10 MC67 User Guide
CHAPTER 4 MAKING CALLS
Introduction
Use the MC67 to make phone calls, keep track of calls, and send text messages. Wireless service providers
may also provide other services such as voice mail, call forwarding, and caller ID.
Also use the phone to connect to an Internet Service Provider (ISP) or work network in order to browse the
Web and read e-mail over Evolved High-Speed Packet Access (HSPA+) or CDMA Evolution Data Optimized
(EvDO) using cellular line.
Making a Call
NOTE The user can make emergency calls even when the MC67 is locked or when a subscriber identification
module (SIM) card is not installed. See Emergency Calling on page 4-5 for more information.
With the MC67, make a call from the phone, contacts, speed dial and call history.
Using the Phone Keypad
To make a call using the phone keypad:
1.
Press
.
2.
Enter the phone number on the dialer or keypad. The number appears in the call line.
3.
Press
4.
Press
.
ok
to stop dialing or end the call.
NOTE If the user taps a wrong number, tap Delete key to erase each subsequent digit of a number. To erase the
entire number, tap and hold the Delete key.
4-2
MC67 User Guide
Smart Dialing
Smart Dialing makes it easy to dial a phone number. When the user starts entering numbers or characters,
Smart Dialing automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone
numbers in Call History (including incoming, outgoing, and missed calls). The user can then select the desired
number or contact from the filtered list to dial.
Open the Phone screen, then tap the keys on the Phone keypad that correspond to the phone number or
contact to call. The contact panel lists contacts that match the sequence entered.
Smart Dialing starts looking for numbers or contacts that match the sequence entered.
To find a phone number:
• Enter the first one or two digits to find a phone number in Call History.
• Enter the first three digits or more to find a phone number from the saved Contacts and SIM card.
To find a contact name:
• Enter the first letter of a contact’s first name or last name. Smart Dialing searches for the letter starting
from the first character of a contact name as well as from the character that appears after a space,
dash, or underscore in a contact name. For example, if the user taps number “2” which is associated
with [a, b, c] on the Phone keypad, contact names such as the following will be considered matches:
“Smith, Bernard”, “Adams, John”, “Carlson, Eileen”, “Dillon, Albert”, “Childs, Larry”, “Cooper, Robert”
and “Parks, Celine”.
• If the matching list is long narrow down the search further by entering another letter. Using the same
example above, tap “3” which is associated with (d, e, f), the matching list is narrowed down to the
following names: “Smith, Bernard”, “Adams, John”, and “Parks, Celine”.
Figure 4-1 Finding a Contact
To make a call or send a text message using Smart Dialing:
1.
Begin entering the first few numbers or characters.
2.
In the Smart Dialing panel, use the up and down arrows on the keypad to navigate to the desired contact or
phone number.
3.
When the correct contact is selected, press TALK to make a voice call.
4.
To send a text message to the selected contact, tap
5.
To call a different phone number associated with the selected contact, tap the contact name and select the
phone number to call.
> Send Text Message.
Making Calls
4-3
Using Contacts
Use Contacts to make a call without looking up or entering the phone number.
To make a call from Contacts:
1.
Tap Contacts.
2.
From the contact list, tap and hold the contact name.
Figure 4-2 Contacts Menu
3.
Tap Call Work, Call Home or Call Mobile.
NOTE To make a call from an open contact, tap the number to call. See On-Device Help for more information
about Contacts.
Using Call History
To make a call using Call History:
1.
Press
.
2.
From the Phone keypad, tap Call History.
Phone icon
Figure 4-3 Call History Window
3.
Tap the phone icon next to the number to begin dialing and return to the phone keypad.
4-4
MC67 User Guide
4.
Tap End or press the red phone key on the MC67 keypad to stop dialing or end the call.
Making a Speed Dial Call
Use Speed Dial to call someone saved in the speed dial directory.
To make a speed dial call:
1.
Press
.
2.
From the keypad, tap and hold the speed dial location number assigned to a contact. (To dial a one-digit
speed dial location number, tap and hold the speed dial number. To dial a two-digit speed dial location
number, tap the first digit and then tap and hold the second digit.)
or
From the keypad, tap Speed Dial and tap the speed dial location number of the desired contact in the list.
Speed Dial
Location Number
Figure 4-4 Speed Dial Contact List
3.
To stop dialing or end the call, press
ok
.
Answering a Call
A dialog box appears on the MC67 when it receives an incoming call. If the phone is set to ring, a ring tone
sounds. Answer or ignore the incoming call.
To answer an incoming call tap Answer on the dialog box or press
.
Figure 4-5 Incoming Call
To ignore the incoming call tap
or press
. This sends the caller to voice mail, depending on the
service provider. Otherwise, this presents a busy signal to the calling party.
Making Calls
4-5
• The user can use other programs on the MC67 during a call. To switch back to the phone, press
.
To end the call press
ok
.
Incoming Call Features
Press
to end the call.
ok
• To hold the current call and answer a waiting call, tap Answer to place the current call on hold and
answer the incoming call.
• Press
to put a call on hold to call another number.
• To move from one call to another, press
.
Missed Call Notification
When the user does not answer an incoming call, the Home screen displays a Missed Call indication.
To display a missed call entry tap the Missed Call box on the Home screen.
Emergency Calling
The service provider programs one or more emergency phone numbers, such as 911 or 999, that the user can
call under any circumstances, even when the phone is locked, a SIM card is not inserted or the phone is not
activated. The service provider can program additional emergency numbers into the SIM card. However, the
SIM card must be inserted in the MC67 in order to use the numbers stored on it. See the service provider for
additional information.
NOTE Emergency numbers vary by country. The phone’s pre-programmed emergency number(s) may not work
in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or
interference issues.
Audio Modes
The MC67 offers three audio modes for use during phone calls:
• Handset Mode: Switches audio to the speaker at the top front of the MC67, so The user can use the
MC67 as a handset. This is the default mode.
• Speaker Mode: Use the MC67 as if on speaker phone. Tap the Speaker On button to activate this
mode. Tap the Speaker Off button to switch back to handset mode.
• Headset Mode: Connect a Bluetooth headset to automatically switch audio to the headset.
The MC67 defaults to handset mode.
Using a Bluetooth Headset
Use a Bluetooth headset for audio communication when using an audio-enabled application. See Chapter 7,
Bluetooth for information on connecting a Bluetooth headset to the MC67. Set the MC67’s volume
4-6
MC67 User Guide
appropriately before putting the headset on. When a Bluetooth headset is connected the speakerphone is
muted.
Adjusting Audio Volume
Use the Volume buttons to adjust the volume of the ringer when not in a call and the audio volume when in a
call.
NOTE Adjust the conversation phone volume during a call. Adjusting the volume while not in a call affects the
ring and notification sound levels.
Muting a Call
During a call, the caller can mute the microphone so they can hear the person on the line but cannot hear the
caller. This is useful when there is conversation or background noise.
To mute or unmute a call tap Mute on the dialer to mute the audio. The Mute button becomes yellow.
Taking Notes
To create a note during a call, tap Note on the display, then enter the note. For more information about creating
notes see the Windows On-Device Help.
To access a note created during a call:
1.
Press
.
2.
From the Phone keypad, tap Call History.
3.
Tap and hold the number or the Note icon for the phone call entry containing the note.
Note icon
Figure 4-6 Call History - Notes Menu
4.
Tap View Note.
5.
Tap OK to exit.
NOTE Also access notes directly from the Notes application by tapping
> Notes.
Making Calls
4-7
Using Call History
Use Call History to call someone who was recently called, or recently called in. Call History provides the time
and duration of all incoming, outgoing, and missed calls. It also provides a summary of total calls and easy
access to notes taken during a call. Table 4-1 lists the call history icons that appear in the Call History window.
Table 4-1 Call History Icons
Icon
Description
This icon appears next to the contact information for all outgoing calls.
This icon appears next to the contact information for all incoming calls.
This icon appears next to the contact information for all missed calls.
Managing Call History
Change views, reset the call timer, and delete calls to manage the calls stored in Call History.
Changing the Call History View
1.
Press
to display the Phone dialer.
2.
From the Phone dialer, tap Call History.
3.
Tap
4.
Select a view type from the menu to display only missed calls, outgoing calls, incoming calls, or calls listed
alphabetically by caller name.
5.
Tap OK to exit the Call History window.
> Filter to show the menu.
Resetting the Recent Calls Counter
1.
Press
to display the Phone dialer.
2.
From the Phone dialer, tap Call History.
3.
Tap
4.
Select Call Timers... .
.
4-8
MC67 User Guide
Figure 4-7 Call History - Call Timers
5.
Tap Reset. (The All Calls: counter cannot be reset.)
6.
Tap OK to exit the Call Timers window.
Deleting All Call History Items
1.
Press
to display the Phone dialer.
2.
From the Phone dialer, tap Call History.
3.
Tap
4.
Select Delete all calls.
5.
Tap Yes.
6.
Tap OK to exit the Call History window.
.
Viewing Call Status
1.
Press
to display the Phone dialer.
2.
From the Phone dialer, tap Call History.
3.
Tap an entry. The Call Status window appears.
Figure 4-8 Call History - Detail
Making Calls
4-9
NOTE When more than one call is on the phone line, only the duration of the first call is recorded.
4.
Tap OK and then OK to exit.
Using the Call History Menu
Use the Call History menu to dial voice mail, save to contacts, view a note, delete a listing, send an SMS and
make a call.
1.
Press
to display the Phone dialer.
2.
From the Phone dialer, tap Call History.
3.
Tap and hold an item in the list.
Figure 4-9 Call History - Menu
4.
Select an applicable item from the menu, as needed.
5.
Depending on the item selected, the appropriate window displays. For example, select Send Text
message to display the Text Messages window.
6.
Tap OK to exit the Call History window.
Conference Calling
NOTE For use on GSM/UTMTS networks only.
Conference Calling and the number of conference calls allowed may not be available on all services.
Please check with the service provider for Conference Calling availability.
To create a conference phone session with multiple people:
1.
Press
to display the Phone dialer.
2.
Enter the first phone number and press Talk. When the call connects, Hold appears on the dialer.
3.
Tap Hold to place the first call on hold.
4.
Enter the second phone number and tap Talk.
4 - 10 MC67 User Guide
5.
After the call is answered, tap Conference to place the calls in conference mode.
6.
Tap Hold to place the conference on hold.
7.
Enter another phone number and tap Talk.
8.
After the call is answered, tap Conference to place all the calls in conference mode.
9.
Repeat steps 6 through 8 for up to six phone numbers.
10. Tap End or press the red phone key on the keypad to end the conference call.
NOTE To speak privately with one party during a conference call, tap Private. Select the party to make private
and then tap Private. To include all parties again, tap Conference.
Making a 3-way Call
NOTE For use with CDMA networks only.
3-way Calling may not be available on all services. Check with service provider for availability.
With 3-way Calling, the user can talk to two people at the same time. When using this feature, the normal
airtime rates will be changed for each of the two calls.
1.
Enter a number and press Talk.
2.
Once you have established the connection, enter or select a number and tap Talk.
3.
When you are connected to the second party, tap Talk to begin the 3-way call.
If one of the people you called hangs up during the call, the two remaining callers stay connected. If you
initiated the call and are the first to hang up, all callers are disconnected.
Swapping Calls (GSM/UMTS)
NOTE For use with GSM/UMTS networks only.
To move between two phone calls:
1.
Press
to display the Phone keypad.
2.
Enter the first phone number and press Talk. When the call connects, Hold appears on the keypad.
Making Calls 4 - 11
Figure 4-10 Call Swapping - Hold
3.
Tap Hold on to place the first number on hold.
4.
Enter the second number and tap Talk.
Figure 4-11 Call Conferencing - Conferencing
5.
Tap Swap to move from one call to the other.
6.
Tap End or press the red phone key on the MC67 keypad to end each call.
Swapping Calls (CDMA)
NOTE For use with CDMA networks only.
To swap between two incoming phone calls:
1.
Tap Answer (icon) to connect to the first call.
4 - 12 MC67 User Guide
Figure 4-12 Answer a Call
2.
When a second call arrives, tap Answer (icon). The first call is placed on hold.
3.
Tap Talk to swap from one call to the other.
Figure 4-13 Call Swapping
4.
Tap End or press the red phone key on the keypad to end the active call. The remaining call re-connects,
5.
Tap End or press the red phone key on the keypad to end the last call.
Speed Dial Setup
Create speed dial numbers to dial frequently called numbers with a single tap. Before creating a speed dial
entry, ensure the phone number exists in Contacts.
Adding a Speed Dial Entry
To add a speed dial entry from the phone keypad:
1.
Ensure the contact and phone number are in the Contacts list.
2.
Press
3.
Tap Speed Dial button > Menu > New.
.
Making Calls 4 - 13
Figure 4-14 Contacts
4.
Tap the desired contact name and number in the list.
Figure 4-15 Speed Dial Contact Location
5.
In the Location field, tap the up/down arrows to select an available location to assign as the new speed
dial entry. The first speed dial location is reserved for voice mail.
6.
Tap OK to add the contact to the speed dial list.
Figure 4-16 Speed Dial Contact List
7.
Tap OK to exit the Speed Dial Contact List.
To add a speed dial entry from the Contacts window:
4 - 14 MC67 User Guide
1.
Tap
> Contacts.
Figure 4-17 Contacts
2.
Tap a contact name.
3.
Tap Menu > Add to Speed Dial.
Figure 4-18 Speed Dial Contact Location
4.
Tap the up/down arrows to select an available location to assign as the new speed dial entry. The first
speed dial location is reserved for voice mail.
5.
Tap OK.
Editing a Speed Dial Entry
To change a speed dial entry:
1.
Press
.
2.
Tap Speed Dial button.
Making Calls 4 - 15
Figure 4-19 Speed Dial Contact List
3.
Tap and hold the contact name.
4.
Tap Edit... .
5.
Change the name, phone number, or location information.
6.
Tap OK.
NOTE Editing names and phone numbers in Speed Dial does not alter contact information in Contacts (
Contacts).
>
Deleting a Speed Dial Entry
To delete a speed dial entry:
1.
Press
.
2.
Tap Speed Dial button.
3.
Tap and hold the contact name.
4.
Tap Delete.
5.
Tap Yes to confirm permanently deleting the speed dial entry.
NOTE Deleting names and phone numbers in Speed Dial does not delete the contact information in Contacts
(
> Contacts).
4 - 16 MC67 User Guide
CHAPTER 5 USING WLAN
Introduction
Wireless Local Area Networks (WLANs) allow the MC67 to communicate wirelessly inside a building. Before
using the MC67 on a WLAN, the facility must be set up with the required hardware to run the WLAN
(sometimes known as infrastructure). The infrastructure and the MC67 must both be properly configured to
enable this communication.
Refer to the documentation provided with the infrastructure (access points (APs), access ports, switches,
Radius servers, etc.) for instructions on how to set up the infrastructure.
Once the infrastructure is set up to enforce the chosen WLAN security scheme, use the Fusion Wireless
Companion software to configure the MC67 to match.
Fusion Overview
The Fusion Wireless Companion software contains applications with which to create wireless profiles. Each
profile specifies the security parameters to use for connecting to a particular WLAN as identified by its
Extended Service Set Identification (ESSID). The Fusion Wireless Companion software also allows the user to
control which profile out of a set of profiles is used to connect. Other Fusion Wireless Companion applications
allow the user to monitor the status of the current WLAN connection and to invoke diagnostic tools for
troubleshooting.
To access Fusion Wireless Companion, tap
> Wireless Companion > Wireless Launch.
5-2
MC67 User Guide
Figure 5-1 Wireless Launch Window
Refer to the Wireless Fusion Enterprise Mobility Suite User Guide for Version X2.xx for detailed information on
using and configuring Fusion Wireless Companion.
To access the on-device Fusion Help tap
> Wireless Companion > Fusion Help.
Connecting to the Internet
To connect to the Internet on a WLAN when using Fusion Wireless Companion, ensure that the network card
settings is set to Internet:
1.
Ensure Fusion is enabled and a profile is configured.
2.
Tap
3.
In the My network card Connects to drop-down list, select The Internet.
4.
Tap OK.
> Settings > Connections > Wi-Fi.
Supported Applications
The Fusion menu items and their corresponding applications are summarized in Table 5-1.
Table 5-1 Supported Applications
Application
Description
Find WLANs
Invokes the Find WLANs application which displays a list of the
WLANs active in the area.
Manage Profiles
Invokes the Manage Profiles application (which includes the Profile
Editor Wizard) to manage and edit the list of WLAN profiles.
Manage Certs
Invokes the Certificate Manager application which allows the user to
manage certificates used for authentication.
Manage PACs
Invokes the PAC Manager application which helps the user manage
the list of Protected Access Credentials used with Extensible
Authentication Protocol-Flexible Authentication via Secure Tunneling
(EAP-FAST) authentication.
Using WLAN
5-3
Table 5-1 Supported Applications (Continued)
Application
Description
Options
Invokes the Options application which allows the user to configure the
Fusion option settings.
Wireless Status
Invokes the Wireless Status application which allows the user to view
the status of the current wireless connection.
Wireless Diagnostics
Invokes the Wireless Diagnostics application which provides tools
with which to diagnose problems with the wireless connection.
Log on/off
Invokes the Network Login dialog which allows the user to log on to a
particular profile or to log off from the currently active profile
Fusion Help
Invokes Fusion Help application which provides on-device Help.
Fusion Setup
For detailed WLAN setup using Fusion, refer to the Wireless Fusion Enterprise Mobility Suite User Guide for
Version X2.xx.
To setup WLAN using Fusion:
NOTE Obtain the proper WLAN configuration information from the system administrator prior to performing the
Fusion setup procedures.
The following setup procedure example shows setup of a WLAN using Wired Equivalent Privacy (WEP)
encryption.
1.
Tap the
> Wireless Companion > Wireless Launch > Manage Profiles. The Manage Profiles
window appears.
2.
Tap and hold in the window and select Add from the pop-up menu. The Wireless LAN Profile Entry
window appears.
3.
In the Profile Name text box enter a name for the profile.
4.
In the ESSID text box enter the ESSID.
Figure 5-2 Profile ID Dialog Box
5.
Tap Next. The Operating Mode dialog box displays.
6.
In the Operating Mode drop-down list, select Infrastructure or Ad-hoc.
5-4
MC67 User Guide
Figure 5-3 Operating Mode Dialog Box
7.
Tap Next. The Security Mode dialog box displays.
8.
In the Security Mode drop-down list, select Legacy (Pre-WPA).
Figure 5-4 Security/Authentication Dialog Box
9.
In the Authentication drop-down list, select None.
10. Tap Next. The Encryption dialog box displays.
11. In the Encryption Type drop-down list, select WEP-40 (40/24).
Figure 5-5 Encryption Dialog Box
12. Select the Pass-phrase or Hexadecimal Keys radio button to indicate whether a pass-phrase or
hexadecimal keys will be entered on the next page.
13. Select the For added security - Mask characters entered check box to hide characters entered.
Deselect this to show characters entered.
14. Tap Next.
Using WLAN
5-5
Figure 5-6 WEP-40 WEP Keys Dialog Box
15. In the Edit Key drop-down list, select the key to enter.
16. In the Key field, enter 10 hexadecimal characters.
17. In the Confirm field, re-enter the key. When the keys match, a message appears indicating that the keys
match.
18. Repeat for each WEP key.
19. In the Transmit Key drop-down list, select the key to transmit.
20. Tap Next. The IPv4 Address Entry dialog box displays.
Figure 5-7 IP Address Entry Dialog Box
21. Ensure that all three check boxes are selected.
22. Tap Next. The Battery Usage dialog box appears.
23. In the Battery Usage Mode dialog box select a power consumption option.
Figure 5-8 Battery Usage Dialog Box
24. Tap Next. The Performance Settings dialog box appears.
25. In the Performance Settings dialog box select either Optimize for Data or Optimize for Voice.
26. Tap Save.
5-6
MC67 User Guide
CHAPTER 6 MESSAGING
Introduction
This chapter describes how to use Email and text messaging.
Email
Use email to send messages to other users. See Email Setup on page 6-6 for information on setting up an
Email account.
Creating an Email Message
To create an email message:
1.
Press
> E-mail.
2.
Select an email account.
3.
Tap
4.
To add recipients, enter their email addresses, separating them with a semicolon ( ; ). Tap To to add email
addresses stored in Contacts.
5.
Enter a subject and compose the message.
6.
To add an attachment to the message, tap
File.
7.
Tap
> New.
.
Viewing an Email Message
To view an email message:
1.
Press
> E-mail.
> Insert and tap the item to attach: Picture, Voice Note, or
6-2
MC67 User Guide
2.
Select an email account.
3.
Tap an email to open it.
Replying to a Message
To reply to a message:
1.
Press
> E-mail.
2.
Select an email account.
3.
Tap an email to open it.
4.
Tap
5.
Enter a reply message, and then tap
.
.
Text Messaging
Use the Text Messages window to send and receive text messages to and from mobile phones. The text can
contain words, numbers, or an alphanumeric combination no longer than 160 characters.
Short text messages delivered over mobile networks transmit from the sending MC67, are stored in a central
short message center, then forwarded to the destination mobile device. If the recipient is not available, the
message is stored and can be sent later.
Viewing Text Messages
The user can view a text message whether the phone is on or off. When the phone is on, the user can view a
text message from its notification pop-up. Tap the text message notification icon on the navigation bar to
display the message.
Text Message Notification Icon
Figure 6-1 New Text Message Notification
The Caller Identification feature matches incoming text message numbers with those stored in Contacts so the
user knows who is sending the message. Furthermore, the New Text Message dialog box gives the user the
option to call the sender or save, dismiss, or delete the message.
Messaging
Figure 6-2 New Text Message Options
When the phone function is off, the user can still view received text message:
1.
Tap
> Text or on the Today screen, tap the text message on the Information Bar.
Tap to View Text Messages.
Figure 6-3 Text Messaging on Today Screen
2.
The Text Messages window appears.
3.
In the message list, tap the text message.
Enter reply here.
Figure 6-4 Text Messages List
6-3
6-4
MC67 User Guide
NOTE If the phone is turned off and the user tried to call the sender, send a reply, or forward the message, the
user is prompted to turn the phone function on.
Sending a Text Message
To create a text message:
1.
On the Phone screen, select a contact name to send a message to.
2.
Tap Menu > Send Text Message.
Figure 6-5 Phone Screen Contact List
3.
Compose the message.
Address Area
Message Area
Figure 6-6 Create Text Message
• The auto-correct feature automatically fixes common spelling errors as the user types so the
messages are more accurate.
• The character counter lets the user see and control the size of the message.
• If the user wants to know if the text message was received, tap Menu > Message Options, then
select the Request message delivery notification check box.
4.
Tap Send when finished the message.
If the phone is turned on, the text message is sent. If it is off, the user is prompted to turn on the phone. If
the user does so, the message is sent; otherwise tap OK, the message is saved in the Drafts folder and
sent when the phone is turned on.
Messaging
6-5
If the user is out of coverage area, the message is saved in the Drafts folder. The user has to manually
re-send it when the user returns to a coverage area.
NOTE
Using a Dual Line SIM
NOTE Check with the service provider for availability.
Dual line SIM cards allow for two phone lines on a single card. For example, one line can be a business phone
line and the other a personal phone line.
To switch between phone lines:
1.
Tap
> Programs > SIM Toolkit.
Figure 6-7 SIM UI Window
2.
Select Dual and then tap Select.
Figure 6-8 Change Phone Line
3.
Select Change and then tap Select.
4.
If applicable, sign in with the PIN number for the other line.
6-6
MC67 User Guide
Email Setup
The MC67’s Messaging application lets users access and manage multiple email accounts simultaneously in
one convenient location. To send and receive email messages through an ISP (Internet Service Provider)
account, or to use the MC67 to access corporate email through a VPN (Virtual Private Network), first set up an
IMAP or POP account.
• IMAP (Internet Message Access Protocol) - This mail retrieval protocol is frequently used in large
networks and commercial and institutional settings. IMAP4 is the current standard.
• POP (Post Office Protocol) - This protocol is supported by most ISPs and is currently more common
among consumer applications. POP3 is the current standard.
NOTE If the user has multiple email accounts, configure each account with its own settings.
Setting Up an IMAP or POP Account
When setting up an IMAP or POP account, the MC67 may be able to retrieve account settings automatically, or
the user may need to enter certain settings manually.
Automatic Email Setup
1.
Tap
> E-mail.
2.
Tap Setup E-mail.
3.
In the E-mail address text box, enter an email address.
4.
In the Password text box, enter an associated password.
5.
The Save password checkbox is checked by default to allow the MC67 to always remember the email
account password. To prevent other users from viewing the email account, tap the Save password
checkbox to remove the checkmark and deactivate the feature.
6.
Tap Next.
NOTE For some common email types, the MC67 automatically detects and configures the email settings without
performing this step.
7.
Tap the Try to get e-mail settings automatically from the Internet checkbox to place a checkmark in the
checkbox.
Tap Next to attempt to retrieve these settings automatically. This process may take several minutes. The
MC67 attempts to determine the necessary communication settings for both incoming and outgoing email
messages.
8.
If the MC67 was able to automatically retrieve the necessary settings, tap Next.
If the MC67 was unable to obtain the settings automatically, tap Next and proceed to step 8 in Entering
Email Settings Manually on page 6-7.
9.
In the Your name: field, enter the name that displays in the From field on outgoing messages.
10. In the Account display name: field enter a name for the new email account.
This name appears within the list of available email accounts on the E-mail page.
Messaging
6-7
11. Tap Next.
12. Tap the Automatic Send/Receive: field and select the time interval for the MC67 to send and check for
new email messages.
13. Tap the Review all download settings link for additional download settings and options. See Editing an
Email Account on page 6-8 for more details.
14. Tap Finish.
Manual Email Setup
If the Automatic configuration was unsuccessful, or if accessing an account using a VPN server connection,
contact the Internet Service Provider (ISP) or network administrator for the following information and enter it
manually:
• Account type (IMAP4 or POP3)
• Incoming and outgoing mail server names
• Username and password
• Domain name
• Special security settings (if used).
For more information about configuring email accounts, go to: www.microsoft.com.
Entering Email Settings Manually
1.
Tap
> E-mail.
2.
Tap Setup E-mail.
3.
In the E-mail address: field, enter the email address for the account.
4.
In the Password: fields and the password for the account.
5.
The Save password checkbox is checked by default to allow the MC67 to always remember the email
account password. To prevent other users from viewing email, tap the Save password checkbox to
remove the checkmark and deactivate the feature.
6.
Tap Next.
7.
Tap the Try to get e-mail settings automatically from the Internet box to remove the checkmark from the
box and tap Next.
8.
In the Your e-mail provider: drop-down list, select Internet e-mail and tap Next.
9.
In the Your name: field enter the name that will display in the From field on outgoing messages.
10. In the Account display name: field enter a name for this new email account.
This name appears within the list of available email accounts on the E-mail page.
11. Tap Next.
12. In the Incoming mail server: field enter the incoming mail server address.
13. In the Account Type: drop-down list, select either POP3 or IMAP4.
14. Tap Next.
6-8
MC67 User Guide
15. In the User name: field enter the username for the account.
16. In the Password: field enter the password for the account.
17. Tap Next.
18. In the Outgoing (SMTP) mail server: field enter the outgoing mail server address.
19. Check the appropriate fields and then tap OK.
• Outgoing server requires authentication is used if a password is required for outgoing mail in addition
to incoming mail. (Please contact the System Administrator for detailed server requirements.)
Use the same user name and password for sending e-mail to use the same user name and password
for outgoing mail as well as for incoming mail (can only be selected if the Outgoing server requires
authentication checkbox is checked).
20. Tap the Advanced Server Settings link.
• These allows configuration of server-specific messaging settings such as SSL requirements for both
incoming and outgoing email, as well as network firewall profiles.
• Select the desired options.
• Tap Done once completed making updates to these settings.
21. Tap Next.
22. In the Automatic Send/Receive: drop-down list select the time interval for the MC67 to send and check
for new email.
23. Tap the Review all download settings link for additional download settings and options.
24. Tap Finish.
Editing an Email Account
To edit general email settings:
1.
Tap
> E-mail.
2.
Highlight an account and tap Menu > Options.
3.
Tap the desired email account from the on screen list.
4.
Tap Edit Account Setup.
5.
Confirm the email address and make any changes if necessary. Tap Next.
6.
Confirm the Your name and Account display name information and make any changes if necessary. Tap
Next.
7.
Confirm the Incoming mail server and Account type information and make any changes if necessary.
Tap Next.
8.
Confirm the User name and Password information and make any changes if necessary (including
checking or unchecking the Save password checkbox). Tap Next.
9.
Confirm the Outgoing (SMTP) mail server information and make any changes if necessary.
10. Tap the Advanced Server Settings link and select any setting on this page to check or uncheck the
option.
Messaging
6-9
• Require SSL for Incoming e-mail check box to enable SSL encryption of incoming email (if supported
by the mail server).
• Require SSL for Outgoing e-mail checkbox to enable SSL encryption of outgoing email (if supported
by the mail server).
• Network connection drop-down list to select a firewall connection setting. Select either The Internet
(open: no firewall), Work (behind a firewall) or a data connection.
11. Tap Done and then tap Next.
12. In the Automatic Send/Receive drop-down list, select the time interval the MC67 sends and checks for
new email.
13. In the Download messages drop-down list, select the age range of messages to download from the
server to the MC67. (The longer the time period, the more messages are downloaded.)
14. Tap the Advanced Settings link and select any setting on this page to check or uncheck the option.
• Select the Send/receive when I click Send checkbox to automatically check for and download new
messages whenever the user sends a message.
• Select the Use automatic send/receive schedule when roaming checkbox to continue to check the
email at predetermined intervals even if in a roaming area.
• In the When deleting messages drop-down list select whether to automatically delete or retain
messages on the email server when deleting messages from the MC67.
15. Tap Done.
16. Tap Next.
17. Tap an on-screen field and change any settings. Tap an option to select it.
• In the Message format drop-down list, select to view the email messages as either HTML or plain text
documents.
• In the Message download limit drop-down list, select the size limit of files attached to email messages.
18. Tap Finish.
Setting Email Signatures
Signatures are the string of text automatically added to the end of an outgoing emails or messages.
1.
Tap
> E-mail.
2.
Tap Menu > Options.
3.
Highlight an account and tap Signatures.
4.
In the Select an account drop-down list, select a pre-existing account.
5.
Tap the Use signature with this account checkbox to enable a signature to be automatically added to
new outgoing messages.
6.
Tap the Use when replying and forwarding checkbox to enable a signature to be automatically added to
any messaging being replied to or being forwarded from the account.
7.
Tap in the text field and enter a signature message.
8.
Tap OK to save the new signature.
6 - 10 MC67 User Guide
CHAPTER 7 BLUETOOTH
Introduction
Bluetooth-equipped devices can communicate without wires, using frequency-hopping spread spectrum
(FHSS) radio frequency (RF) to transmit and receive data in the 2.4 GHz Industry Scientific and Medical (ISM)
band (802.15.1). Bluetooth wireless technology is specifically designed for short-range (10 meters/32 feet)
communication and low power consumption.
MC67s with Bluetooth capabilities can exchange information (e.g., files, appointments, and tasks) with other
Bluetooth enabled devices such as phones, printers, access points, and other mobile computers. To use the
MC67 as a modem, create a dial-up modem connection between a computer and MC67.
The MC67 with Bluetooth technology uses either the StoneStreet Bluetooth stack or the Microsoft Bluetooth
stack. To write an application that uses the StoneStreet One Bluetooth stack APIs, refer to the Enterprise
Mobility Developer Kit (EMDK) Help.
Adaptive Frequency Hopping
Adaptive Frequency Hopping (AFH) is a method of avoiding fixed frequency interferers, and can be used with
Bluetooth voice. All devices in the piconet (Bluetooth network) must be AFH-capable in order for AFH to work.
There is no AFH when connecting and discovering devices. Avoid making Bluetooth connections and
discoveries during critical 802.11b communications. AFH for Bluetooth consists of four main sections:
• Channel Classification - A method of detecting an interference on a channel-by-channel basis, or
pre-defined channel mask.
• Link Management - Coordinates and distributes the AFH information to the rest of the Bluetooth network.
• Hop Sequence Modification - Avoids interference by selectively reducing the number of hopping
channels.
• Channel Maintenance - A method for periodically re-evaluating the channels.
When AFH is enabled, the Bluetooth radio “hops around” (instead of through) the 802.11b high-rate channels.
AFH coexistence allows Motorola mobile computers to operate in any infrastructure.
7-2
MC67 User Guide
The Bluetooth radio in this MC67 operates as a Class 2 device power class. The maximum output power is
2.5mW and the expected range is 10 meters (32 feet). A definition of ranges based on power class is difficult to
obtain due to power and device differences, and whether one measures open space or closed office space.
NOTE It is not recommended to perform Bluetooth wireless technology inquiry when high rate 802.11b
operation is required.
Security
The current Bluetooth specification defines security at the link level. Application-level security is not specified.
This allows application developers to define security mechanisms tailored to their specific need. Link-level
security occurs between devices, not users, while application-level security can be implemented on a per-user
basis. The Bluetooth specification defines security algorithms and procedures needed to authenticate devices,
and if needed, encrypt the data flowing on the link between the devices. Device authentication is a mandatory
feature of Bluetooth while link encryption is optional.
Pairing of Bluetooth devices is accomplished by creating an initialization key that is used to authenticate the
devices and create a link key for them. Entering a common Personnel Identification Number (PIN) number in
the devices being paired generates the initialization key. The PIN number is never sent over the air. By default,
the Bluetooth stack responds with no key when a key is requested (it is up to user to respond to the key
request event). Authentication of Bluetooth devices is based-upon a challenge-response transaction. Bluetooth
allows for a PIN number or passkey that is used to create other 128-bit keys used for security and encryption.
The encryption key is derived from the link key used to authenticate the pairing devices. Also worthy of note is
the limited range and fast frequency hopping of the Bluetooth radios that makes long-distance eavesdropping
difficult.
Recommendations are:
• Perform pairing in a secure environment
• Keep PIN codes private and don't store the PIN codes in the mobile computer
• Implement application-level security.
The Microsoft stack supports Smart-pairing. For detailed information, refer to the Microsoft MSDN.
Security Mode 3 (Link Level Encryption)
The MC67 supports Security Level 3 (Link Level Encryption). Link level encryption is the data security process
of encrypting information at the data link level as it is transmitted between two devices.
Microsoft Bluetooth Stack
When pairing with a remote device using the Microsoft Bluetooth UI, Security Level 3 (Link Level Encryption) is
automatically used. When developing applications using the Microsoft Bluetooth stack, enable Security Mode 3
using the BthSetEncryption API call. Refer to the Microsoft MSDN for more information.
StoneStreet One Bluetooth Stack
To set Security Mode 3 on outgoing serial port connections, set Encrypt Link On All Outgoing Connections
checkbox in the Settings > Security. See Security on page 7-39 for more information.
Bluetooth
7-3
FIPS 140-2
The MC67 supports FIPS 140-2 for Bluetooth using the Microsoft Bluetooth stack and the StoneStreet One
Bluetooth stack. FIPS provides secure Bluetooth communication between the MC67 and another mobile
computer or scanner only using a Serial Port Profile.
Bluetooth Configuration
By default, the MC67 is configured to using the Microsoft Bluetooth stack. Refer to the MC67 Integrator Guide,
Appendix B, for information on switching to the StoneStreet One Bluetooth stack.
Table 7-1 list the services supported by the Microsoft Bluetooth stack and the StoneStreet One Bluetooth stack.
Table 7-1 Bluetooth Services
Service
Microsoft Bluetooth
StoneStreet One Bluetooth
Generic Access Profile (GAP)
Yes
Yes
Service Discovery Protocol (SDP)
Profile
Yes
Yes
Serial Port Profile (Server and Client)
Yes
Yes
Hands-free Profile (Audio Gateway)
Yes
Yes
Headset Profile (Audio Gateway)
Yes
Yes
Dial-Up Networking (DUN) Profile
(Gateway Role)
Yes
Yes
Generic OBEX Push Profile
Yes
No
File Transfer Protocol (Client Role)
No
Yes
Synchronization Profile
No
Yes
Personal Area Networking Profile
(PANU/GN)
No
Yes
Advanced Audio Distribution Profile
(A2DP)
Yes
Yes
Audio/Video Remote Control Profile
(AVRCP)
Yes
Yes
Phonebook Access Profile
Yes
Yes
Human Interface Device (HID) Profile
Yes
Yes
Table 7-2 list the COM ports available for the StoneStreet One Bluetooth stack and the Microsoft Bluetooth
stack.
7-4
MC67 User Guide
Table 7-2 COM Ports
Microsoft Bluetooth Stack
StoneStreet One Bluetooth Stack
COM5
COM5
COM9
COM9
FIP2
COM11
COM21
COM22
COM23
FIP2
Bluetooth Power States
Cold Boot
Performing a cold boot retain the state of the Bluetooth radio prior to the cold boot.
Warm Boot
Performing a warm boot retain the state of the Bluetooth radio prior to the warm boot.
Suspend
When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the
active connection. When there is no active connection, the Bluetooth radio turns off.
With StoneStreet One Bluetooth Stack
NOTE If there is an active Bluetooth connection between the MC67 and another Bluetooth device, the MC67 will
not timeout. However, if the user presses the Power button on the MC67, the MC67 will suspend and
upon receiving data from a remote Bluetooth device, the MC67 will wake from suspend mode. For
example, Bluetooth scanner sending data to the MC67.
With Microsoft Bluetooth Stack
NOTE If there is an active Bluetooth connection between the MC67 and another Bluetooth device and there is
no data activity, the MC67 will timeout. However, if the user presses the Power button on the MC67, the
MC67 will suspend and upon receiving data from a remote Bluetooth device, the MC67 will wake from
suspend mode. For example, Bluetooth scanner sending data to the MC67.
Resume
When the MC67 resumes, Bluetooth turns on if it was on prior to suspend.
Bluetooth
7-5
MotoBTUI Application
Use the MotoBTUI application to:
• Turn the Bluetooth radio on and off. See Turning the Bluetooth Radio Mode On and Off on page 7-6.
• View device information
• Control device status
• Generate a pairing bar code (See Using the RS507 Hands-free Imager on page 10-19 for more
information).
• Configure FIPS key.
Figure 7-1 MotoBTUI Window
Device Information
The view the MC67 Bluetooth information:
1.
Tap Start > MotoUI.
2.
Tap My Device Information.
3.
The Device Information window displays:
• Device Name
• HCI version number
• LMP version number
• Bluetooth chip manufacturer name
• BT UI version number.
4.
Tap the Back button to return to the MotoBTUI window.
FIPS Configuration
NOTE By default the MC67 has a FIPS key installed. If required, the user can generate a new FIPS
key. If a new key is generated on the MC67, the same key is required to be used on the other
Bluetooth device. The user must transfer the key to the other device.
7-6
MC67 User Guide
To generate a new FIPS key automatically:
1.
Tap Start > MotoUI.
2.
Tap FIPS Configuration.
3.
Tap Generate Key button.
4.
Tap the SetUp Key button. A new key is generated. The key file, NewAESKey.reg, is created in the
/Application folder.
5.
Tap the Back button to return to the MotoBTUI window.
To generate a new FIPS key manually:
1.
Tap Start > MotoUI.
2.
Tap FIPS Configuration.
3.
Tap Enter Key button.
4.
In the text box, enter a key.
5.
Tap the SetUp Key button. A new key is generated. The key file, NewAESKey.reg, is created in the
/Application folder.
6.
Tap the Back button to return to the MotoBTUI window.
To transfer the new FIPS key to another Bluetooth device:
1.
Copy the NewAESKey.reg file from the MC67 to the other Bluetooth device. Place the file into the
/Application folder.
2.
Navigate to the /Application folder.
3.
Locate the NewAESKey.reg file and tap the filename. The RegMerge confirmation box displays.
4.
Tap Yes.
5.
Perform a warm boot.
Device Status
Use the Device Status option to set if the MC67 would be seem by other Bluetooth devices. Touch the Device
Status option to toggle the MC67 from Hidden to Discoverable.
Using Microsoft Bluetooth Stack
The following sections provide information on using the Microsoft Bluetooth stack.
Turning the Bluetooth Radio Mode On and Off
NOTE Turn the Bluetooth radio on or off using the Wireless Manager. Tap the Status bar and select the
Connectivity icon. Tap Wireless Manager.
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When
the radio is off, other Bluetooth devices cannot see or connect to the MC67. Turn on the Bluetooth radio to
Bluetooth
7-7
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in
close proximity.
NOTE To achieve the best battery life turn off radios not in use.
Enabling Bluetooth
There are three ways to enable Bluetooth:
1.
Microsoft Bluetooth application:
a.
Tap
> Setting > Connections > Bluetooth > Mode.
Figure 7-2 Bluetooth Mode
2.
3.
b.
Check the Turn On Bluetooth checkbox to turn on the Bluetooth radio on.
c.
Tap OK.
Wireless Manager:
a.
Tap the Status Bar.
b.
Tap the Connectivity icon.
c.
Tap Wireless Manager.
d.
Tap Bluetooth to turn the Bluetooth radio on.
e.
Tap X.
MotoBTUI application:
a.
Tap
> MotoBTUI.
b.
Tap the Bluetooth Off tab to turn the Bluetooth radio on.
c.
Tap X.
Disabling Bluetooth
There are three ways to disable Bluetooth:
1.
Microsoft Bluetooth application:
a.
Tap
> Setting > Connections > Bluetooth > Mode.
7-8
MC67 User Guide
2.
3.
b.
Un-check the Turn On Bluetooth checkbox to turn the Bluetooth radio off.
c.
Tap OK.
Wireless Manager:
a.
Tap the Status Bar.
b.
Tap the Connectivity icon.
c.
Tap Wireless Manager.
d.
Tap Bluetooth to turn the Bluetooth radio off.
e.
Tap X.
MotoBTUI application:
a.
Tap
> MotoBTUI.
b.
Tap the Bluetooth On tab to turn the Bluetooth radio off.
c.
Tap X.
Discovering Bluetooth Device(s)
The MC67 can receive information from discovered devices without pairing. However, once paired, the MC67
and a paired device exchange information automatically when the Bluetooth radio is turned on. See Pairing
with Discovered Device(s) on page 7-32 for more information.
To find Bluetooth devices in the area:
1.
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the two devices are within 10 meters (32 feet) of one another.
4.
Tap
> Settings > Connections > Bluetooth > Devices.
Figure 7-3 Bluetooth - Devices
5.
Tap Add new device. The MC67 begins searching for discoverable Bluetooth devices in the area.
Bluetooth
Figure 7-4 Searching for Bluetooth Devices
6.
Select a device from the list.
Figure 7-5 Select a Bluetooth Device
7.
Tap Next. The Enter Passcode window appears.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Figure 7-6 Enter Passcode
7-9
7 - 10 MC67 User Guide
8.
Enter a Passcode.
If the device has a specific passcode, enter it in the Passcode field and tap Next. If the device does not
have a specific passcode, enter one in the Passcode field and tap Next. The MC67 tries to connect with
the other device.
9.
If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the
created passcode to establish a paired connection. (If you entered a passcode from the device, you should
not have to do anything on the other device).
10. When the connection is complete, a list of matching and supported services on the device appears.
11. Select the services to use and tap Finish. The services on the new devices have to be selected or else the
pairing won’t include those services, even though the devices are paired. If services are not selected, you
will be continually reprompted for the passcode from the device.
12. The device appears in the list on the main window.
After the passcodes have been accepted on both sides, a trusted (“paired”) connection is created.
Available Services
NOTE Some devices might not require a PIN. This depends upon the device’s authentication.
The MC67 with Microsoft Bluetooth stack offers the following services:
• OBEX Object Push Services via Beam
• Serial Port Services
• Personal Area Networking Services
• PBAP Services
• Dial-up Networking Services
• A2DP/AVRCP Services.
See the following sections for information on these services.
Object Push Services via Beam
NOTE The MC67 only send files to a remote device using the Beam function.
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between
the MC67 and another Bluetooth enabled device:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 10 meters (32 feet) of one another.
3.
Tap
4.
Navigate to the file to transfer.
5.
Tap and hold on the filename until the pop-up menu appears.
> Programs > File Explorer.
Bluetooth 7 - 11
Figure 7-7 File Explorer Window
6.
Select Beam File. The MC67 searches for Bluetooth devices in the area.
7.
Tap Tap to send next to the Bluetooth device to send the file to. The MC67 communicates with the device
and sends the file. When completed, Tap to send changes to Done.
Figure 7-8 Beam File Window
To transfer a contact between the MC67 and another Bluetooth enabled device:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 10 meters (32 feet) of one another.
3.
Tap
4.
Navigate to the contact to transfer.
5.
Tap and hold on the contact until the pop-up menu appears.
> Contacts.
7 - 12 MC67 User Guide
Figure 7-9 Contact Window
6.
Select Send Contact > Beam. The MC67 searches for Bluetooth devices in the area.
7.
Tap Tap to send next to the Bluetooth device to send the file to. The MC67 communicates with the device
and send the contact. When completed, Tap to send changes to Done.
Internet Sharing
Internet Sharing allows the user to connect a computer or laptop to the MC67 and use the MC67 as a modem
to connect to an office network or Internet Service Provider (ISP).
To use MC67 as a modem using Bluetooth:
1.
Ensure that the MC67 is not connected to the computer or laptop.
2.
On the MC67, ensure that the Phone is on and a data connection is configured.
3.
Tap
4.
In the PC Connection list, select Bluetooth PAN.
5.
In the Network Connection list, select the connection type.
> Programs > Internet Sharing.
Select the network connection that the device should use to connect to the Internet.
6.
Tap Connect.
7.
On the computer or laptop, setup a Bluetooth PAN with the device.
a.
Select Start > Control Panel > Network Connections.
b.
Under Personal Area Network, select Bluetooth Network Connection.
c.
Right-click on Bluetooth Network Connection and select View Bluetooth network devices.
d.
In the Bluetooth Personal Area Network Devices window select the MC67.
e.
Click Connect. The computer connects to the MC67 via Bluetooth.
NOTE If the computer is Bluetooth-enabled and Bluetooth as the PC connection is selected, the user must
initiate and complete the Bluetooth PAN partnership before Internet Sharing will work. For more
information, refer to Windows Help and Support.
8.
To verify, on the computer or laptop, launch Internet Explorer and open a web site.
9.
To end internet sharing, on the MC67 tap Disconnect.
Bluetooth 7 - 13
Serial Port Services
Use the wireless Bluetooth serial port connection as a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Tap
4.
Tap Add new device. The MC67 begins searching for discoverable Bluetooth devices in the area.
5.
Select a device from the list.
6.
Tap Next. The Enter Passcode window appears.
> Settings > Connections > Bluetooth > Devices.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
7.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
8.
In the device list, tap the serial device. The Partnership Settings window displays.
9.
Select the Serial Port checkbox.
10. Tap Save.
11. Tap COM Ports.
12. Tap New Outgoing Port. The add device window appears.
NOTE By default, Secure Connection checkbox is set enabling Security Level 3 (Linked Level Encryption).
13. Select the serial device in the list and then tap Next.
14. Select a COM port from the drop-down list.
15. Tap Finish.
NOTE No connection is made at this point. An application must open the selected COM port to trigger Microsoft
Bluetooth stack to open the connection.
ActiveSync Using Serial Port Services
Use the wireless Bluetooth serial port connection for ActiveSync just as a physical serial cable connection.
Configure the application that will use the connection to the correct serial port.
To set up a Bluetooth ActiveSync connection:
Before setting up a Bluetooth ActiveSync connection, configure the Bluetooth function on the host computer.
7 - 14 MC67 User Guide
NOTE For additional security, disable network bridging on the computer (specifically, bridging to a Remote NDIS
adapter) before connecting to the computer to pass though to the Internet or a network. For more
information on network bridging, see Windows Help on the computer.
Refer to the Windows Help for instructions on setting up a Bluetooth connection.
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 30 feet (10 meters) of one another.
3.
Click Start > All Programs > Microsoft ActiveSync.
4.
Click File > Connection Settings.
Figure 7-10 ActiveSync Connection Settings
5.
On the Allow connections to one of the following drop-down list, select the COM port with the number
noted earlier.
6.
On the MC67, tap
7.
Tap Menu > Connect via Bluetooth.
> Programs > ActiveSync.
Synchronization is automatically initiated.
If an Authentication is required, the Enter Passcode screen appears, type an alphanumeric passkey (PIN
code), then tap Next; enter the same passkey on the other device.
The passkey is recommended for enhanced security. The passkey must be between 1 to 16 alphanumeric
characters.
If the user does not want to use a passkey, tap Next.
8.
To disconnect the ActiveSync connection, tap
9.
Tap Disconnect.
> ActiveSync > Menu > Disconnect.
Phone Book Access Profile Services
Phone Book Access profile (PBAP) is used to synchronize contacts between a remote device and the MC67.
To establish an PBAP synchronization:
1.
Ensure that Bluetooth is enabled and discoverable on both devices.
2.
Ensure that the two devices are within 10 meters (32 feet) of one another.
Bluetooth 7 - 15
3.
Tap
> Settings > Connection > Bluetooth > Devices.
4.
Tap Add New Device.The MC67 searches for a Bluetooth device, such as a Car Kit.
5.
Select a device from the list.
6.
Tap Next. The Enter Passcode window appears.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
7.
Enter the Passcode and the tap Next. The device is added to the Bluetooth list.
8.
A dialog box appears requesting to transfer contacts to the car kit.
9.
Select Yes or No.
10. If Yes is selected, contacts from the MC67 are transferred to the car kit.
7 - 16 MC67 User Guide
Using Bluetooth StoneStreet One Bluetooth Stack
The following sections provide information on using the Stone Street One Bluetooth stack.
Turning the Bluetooth Radio Mode On and Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When
the radio is off, other Bluetooth devices cannot see or connect to the MC67. Turn on the Bluetooth radio to
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in
close proximity.
NOTE To achieve the best battery life turn off radios not in use.
Disabling Bluetooth
To disable Bluetooth, tap the Connection icon on the Status bar and select Wireless Manager in the
Connectivity dialog box. Tap the blue Bluetooth bar to turn off the Bluetooth radio.
Enabling Bluetooth
To enable Bluetooth, tap the Connection icon on the Status bar and select Wireless Manager in the
Connectivity dialog box. Tap the blue Bluetooth bar to turn on the Bluetooth radio.
Modes
The BTExplorer application has two modes for managing Bluetooth connections: Wizard Mode and Explorer
Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth
users. To switch between modes, select View > Wizard Mode or View > Explorer Mode.
Wizard Mode
Wizard Mode provides a simple process for discovering and connecting to Bluetooth devices.
NOTE Switching between Wizard Mode and Explorer Mode closes all active connections.
Wizard Mode shows the devices and services in a simple Favorites view created by following the step-by-step
wizard.
Explorer Mode
The Explorer Mode window is easy to navigate and provides greater control to users familiar with Bluetooth.
The menu bar provides quick access to the options and tools used to connect to devices. To access Explorer
Mode, tap View > Explorer Mode.
Bluetooth 7 - 17
Figure 7-11 Explorer Mode Window
Use the “tap and hold” technique to view available options. Scroll bars and view options are similar to those on
the Windows desktop. The tree structure lists the following sub-items:
• Local Device - This device
• Remote Device - Other Bluetooth devices
• Trusted Devices - Bonded (paired) Bluetooth devices
• Untrusted Devices - Discovered devices that are not bonded
• Favorites - Selected services that are set as Favorite for quick access.
NOTE Switching between Wizard Mode and Explorer Mode closes all active connections.
Discovering Bluetooth Device(s)
The MC67 can receive information from discovered devices without bonding. However, once bonded, the
MC67 and a bonded device exchange information automatically when the Bluetooth radio is turned on. See
Pairing with Discovered Device(s) on page 7-32 for more information.
To find Bluetooth devices in the area:
1.
Ensure that Bluetooth is enabled on both devices.
2.
Ensure that the Bluetooth device to discover is in discoverable and connectable modes.
3.
Ensure that the require profile is enabled on the MC67. See Profiles on page 7-41 for more information.
4.
Ensure that the two devices are within 30 feet (10 meters) of one another.
5.
Tap
> Settings > Connections > Bluetooth. The BTExplorer window appears.
NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite
connections have been created, the New Connection Wizard screen displays.
6.
Tap Menu > New Connection.The New Connection Wizard appears.
7 - 18 MC67 User Guide
Figure 7-12 BTExplorer Window
7.
Select Explore Services on Remote Device or another from the drop-down list and tap Next.
NOTE If a device discovery action has not been previously performed, a device discovery is automatically
initiated. If a device discovery has previously been performed, the device discovery process is skipped,
and the previously found list of devices displays. To start a new device discovery, tap and hold in the
window and select Discover Devices from the pop-up menu.
8.
BTExplorer searches for Bluetooth devices in the area.
Figure 7-13 Discover Devices Dialog Box
The discovered devices display in the Select Remote Device window.
Bluetooth 7 - 19
Figure 7-14 Select Remote Device Window
9.
Select a device from the list and tap Next. The MC67 searches for services on the selected Bluetooth
device.
Figure 7-15 Device Services
NOTE If the MC67 discovers a service but the service is not supported, the service icon is grayed-out.
10. Select a service from the list and press Next. The Connection Favorite Options window appears.
Figure 7-16 Connection Favorite Options Window
11. In the Favorite Name text box, enter a name for this service that will appear in the Favorite window.
7 - 20 MC67 User Guide
12. Tap Next. The Connection Summary window appears.
13. Tap Connect to add the service to the Favorite window and connect to the service.
Figure 7-17 Favorites Window
Available Services
NOTE Some devices might not require a PIN. This depends upon the device’s authentication.
See the following sections for information on these services.
File Transfer Services
NOTE Shared folders are a security risk.
To transfer files between the MC67 and another Bluetooth enabled device:
1.
Ensure that OBEX File Transfer profile is enabled on the MC67. See Profiles on page 7-41 for more
information.
NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite
connections have been created, the New Connection Wizard screen displays.
2.
Use the Connection Wizard to search for a Bluetooth device.
3.
Select the device and tap Next. The Select Remote Service window appears.
4.
Select File Transfer and tap Next. The Connection Favorite Options window appears.
5.
Tap Next. The Connection Summary window appears.
6.
Tap Connect. The remote device’s accessible folders appear.
Bluetooth 7 - 21
Figure 7-18 File Transfer Window
7.
Double-tap the file to copy. The Save Remote File window appears.
Figure 7-19 Save Remote File Window
8.
Tap and hold on the file. A pop-up menu appears.
9.
Select the action to perform:
• New - create a new file or folder on the remote device
• Delete - delete the selected file on the remote device.
• Get File - copy the file from the remote device to the MC67.
• Put File - copy a file from the MC67 to the remote device.
Creating a New File or Folder
To create a new folder or file on the remote device:
1.
Tap and hold on the screen and select New > Folder or New > File. The Create New Folder or Create
New File window appears.
2.
Enter the name for the new folder or file.
3.
Tap OK to create the new folder or file on the remote device.
Deleting a File
To delete a file from the remote device:
7 - 22 MC67 User Guide
1.
Tap and hold on the file to delete and select Delete.
2.
In the Delete Remote Device File dialog box tap Yes.
Getting a File
To copy a file from a remote device:
1.
Double-tap or tap and hold on the file and select Get. The Save Remote File window appears.
2.
Navigate to the directory to save the file.
3.
Tap Save. The file is transferred from the remote device to the MC67.
Copying a File
To copy a file to a remote device:
1.
Tap Action > Put. The Send Local File window appears.
2.
Navigate to the directory to save the file and select a file.
3.
Tap Open. The file copies from the MC67 to the remote device.
Connecting to the Internet Using an Access Point
This section explains how to access a Bluetooth-enabled LAN access point (AP) for a network connection. Use
Internet Explorer to connect to a server.
1.
Ensure the MC67 is discoverable and connectable. See Device Info on page 7-34.
2.
Ensure that the Personal Area Networking profile is enabled on the MC67. See Profiles on page 7-41 for
more information.
3.
Use the Connection Wizard to search for a Bluetooth AP.
NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite
connections have been created, the New Connection Wizard screen displays.
4.
Select the Personal Area Network or Network Access service and select Connect from the pop-up
menu. The MC67 connects with the access point.
5.
Tap
6.
In the address field, enter an internet address and tap the Enter button. The web page loads.
> Internet Explorer. The Internet Explorer window appears.
NOTE Network Access profile is not supported.
Dial-Up Networking Services
Dial-up networking allows the user to connect the MC67 to a Bluetooth Phone and use the Bluetooth Phone as
a modem to connect to an office network or ISP.
Before setting up dial-up networking, obtain dial-up information and other necessary settings (username,
password and domain name, if required) for the office network or ISP.
To create a new Bluetooth connection:
Bluetooth 7 - 23
1.
Ensure the Bluetooth Phone is discoverable and connectable.
2.
Ensure that the Dial-Up Networking profile is enabled on the MC67. See Profiles on page 7-41 for more
information.
3.
Tap Menu > New Connection.
4.
Select Explore Services on Remote Device or another from the drop-down list and tap Next.
5.
BTExplorer searches for Bluetooth devices in the area.
The discovered devices display in the Select Remote Device window.
6.
Select the Bluetooth Phone from the list and tap Next. The MC67 searches for services on the Bluetooth
Phone.
Figure 7-20 Select Remote Service Window
7.
Select Dial-up Networking Gateway service from the list and tap Next. The Connection Favorite
Options window appears.
Figure 7-21 Connection Favorite Options Window
8.
In the Favorite Name text box, enter a name for this service that will appear in the Favorite window.
9.
Tap Next. The Connection Summary window appears.
10. Tap Connect. The Select Dial-up Networking Entry window appears.
7 - 24 MC67 User Guide
Figure 7-22 Select Dial-up Networking Entry Window
11. Select the entry and tap OK. The MC67 begins to communicate with the Bluetooth phone. If required, the
phone requests permission to communicate with the MC67.
12. Confirm the connection on the phone. The Network Log On window appears.
13. In the User name text box, enter the user name for this connection.
14. In the Password text box, enter the password for this connection.
15. In the Domain text box, enter the domain name for this connection, if required.
16. Tap Finish or Connect.
17. The phone begins dialing and connects to the network.
18. To end a session, tap the Connection icon and then tap Disconnect in the dialog box.
Add a Dial-up Entry
To add a dial-up entry:
1.
In the Select Dial-up Networking Entry window, tap and hold and then select Add Entry from the pop-up
menu.
Figure 7-23 Select Dial-up Networking Entry Window
2.
The Add Phone Book Entry window appears.
Bluetooth 7 - 25
Figure 7-24 Add Phone Book Entry Window
3.
In the Name for the connection text box, enter a name for this connection.
4.
In the Country Code text box, enter the country code for the country that the user is calling.
5.
In the Area Code text box, enter the area code.
6.
In the Phone Number text box, enter the phone number.
7.
Tap OK.
Object Exchange Push Services
Object Exchange (OBEX) is a set of protocols that allows sharing objects such as Contacts or pictures using
Bluetooth.
To exchange contact information with another Bluetooth enabled device:
1.
Ensure the MC67 is discoverable and connectable. See Device Info on page 7-34.
2.
Ensure that the OBEX Object Push profile is enabled on the MC67. See Profiles on page 7-41 for more
information.
NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite
connections have been created, the New Connection Wizard screen displays.
3.
Use the Connection Wizard to search for a Bluetooth device.
4.
Select the device and tap Next.
5.
Select the OBEX Object Push service and tap Next. The Connection Favorite Options window
appears.
6.
Tap Next. The Connection Summary window appears.
7.
Tap Connect. The OBEX Object Push window appears.
8.
In the Action drop-down list, select one of the following options: Send Contact Information, Swap
Contact Information, Fetch Contact Information, or Send a Picture.
Sending a Contact
To send a contact to another device:
7 - 26 MC67 User Guide
NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a
contact.
1.
Tap and hold on OBEX Object Push and select Connect.
Figure 7-25 OBEX Object Push Window
2.
In the Action: drop-down list, select Send Contact Information.
3.
Tap
4.
Select a contact to send to the other device.
5.
Tap OK.
6.
Tap OK to send the contact to the other device and display a confirmation dialog box on the other device to
accept the contact. A Send Contact dialog appears.
7.
Tap Ok.
.
Swapping Contacts
To swap contacts with another device:
NOTE Prior to swapping contacts, a default contact must be set up before attempting to send a contact.
Ensure that the MC67 is connectable.
1.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Bluetooth 7 - 27
Figure 7-26 OBEX Object Push Window
2.
In the Action: drop-down list, select Swap Contact Information.
3.
Tap
4.
Select a contact to send to the other device.
5.
Tap OK.
6.
Tap OK to swap contacts with the other device and display a confirmation dialog box on the other device to
accept the contact.
7.
Tap Ok.
. The Select Contact Entry window appears.
Fetching a Contact
To fetch a contact from another device:
NOTE Prior to sending and receiving contacts, a default contact must be set up before attempting to send a
contact.
Ensure that the MC67 is connectable.
1.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Figure 7-27 OBEX Object Push Window
2.
In the Action: drop-down list, select Fetch Contact information.
7 - 28 MC67 User Guide
3.
Tap OK. The contact on the other device is copied.
Sending a Picture
To send a picture to another device:
1.
Tap and hold on OBEX Object Push and select Connect. The OBEX Object Push window appears.
Figure 7-28 OBEX Object Push Window
2.
In the Action: drop-down list, select Send A Picture.
3.
Tap
. The Send Local Picture window appears.
Figure 7-29 Send Local Picture Window
4.
Navigate to the picture to send to the other device.
5.
Tap Open.
6.
Tap OK to send the picture to the other device and display a confirmation dialog box on the other device to
accept the picture. A Send Picture dialog appears.
7.
Tap Ok.
Headset Services
To connect to a Bluetooth headset:
Bluetooth 7 - 29
NOTE Newer Bluetooth headsets are device dependant and remember the last device they connected to. If
problems occur while connecting to the headset, place the headset in discovery mode. Refer to the
headset user manual for more information.
1.
Ensure the MC67 is connectable (required when automatic re-connect is initiated). See Device Info on
page 7-34.
2.
Ensure that the Headset profile is enabled on the MC67. See Profiles on page 7-41 for more information.
3.
Use the Connection Wizard to search for a Bluetooth headset.
4.
Select the device and tap Next.
5.
Select the Headset service name and select Connect. The MC67 connects to the headset. Refer to the
headset user manual for instructions on communicating with a Bluetooth device.
NOTE When using a Bluetooth headset with Headset Services, the user cannot accept or end a call from the
headset. The user must accept or end a call on the MC67.
6.
Press the communication button on the headset. This routes both system and WAN call audio to the
headset.
7.
When a call is received on the MC67, tap the Accept button to answer the call.
8.
Press the communication button on the headset to route the audio back to the MC67.
Serial Port Services
Use the wireless Bluetooth serial port connection as a physical serial cable connection. Configure the
application that will use the connection to the correct serial port.
To establish a serial port connection:
1.
Use the Connection Wizard to search for a Bluetooth serial device.
2.
Select the device and tap Next. The Connection Favorite Options window appears.
3.
In the Local COM Port: drop-down list select a COM port.
4.
Tap Finish.
ActiveSync Using Serial Port Services
NOTE By default, COM ports COM5, COM9, COM11, COM21, COM22 and COM23 are Bluetooth virtual ports.
If an application opens one of these ports, the Bluetooth driver activates and guides the user through a
Bluetooth connection.
Use the wireless Bluetooth serial port connection for ActiveSync just as a physical serial cable connection.
Configure the application that will use the connection to the correct serial port.
7 - 30 MC67 User Guide
Figure 7-30 ActiveSync Connection Settings Window on PC
To establish an ActiveSync connection:
NOTE When creating an ActiveSync connection, only use StoneStreet One Bluetooth Explorer in Wizard mode.
1.
Use the Connection Wizard to search for a Bluetooth device, such as a computer. In the drop-down list
select ActiveSync via Bluetooth.
2.
Select the device and tap Next. The Connection Favorite Options window appears.
3.
Tap Connect. The Remote Service Connection window appears.
Figure 7-31 Remote Service Connection Window
4.
In the Service Type drop-down list, select Active Sync.
5.
Tap OK. The MC67 connects the PC and an ActiveSync session begins.
6.
Tap Finish. The Connection Favorite Options window appears.
7.
To end the session, tap the ActiveSync icon in the Favorite window and select Disconnect from the
pop-up window.
Bluetooth 7 - 31
Personal Area Network Services
NOTE This profile supports Ad-hoc and PAN User. Network Access Profile is not supported.
Connect two or more Bluetooth devices to share files, collaborate, or play multi-player games. To establish a
Personal Area Network connection:
1.
Ensure that the Personal Area Networking profile is enabled on the MC67. See Profiles on page 7-41 for
more information.
2.
Use the Connection Wizard to search for a Bluetooth device.
3.
Select the device and tap Next. The Connection Favorite Options window appears.
4.
Tap Next. The Connection Summary window appears.
5.
Tap Connect. The MC67 connects to the Bluetooth device.
A2DP/AVRCP Services
A2DP/AVRCP is used to connect to a high-quality stereo headset:
1.
Ensure the MC67 is connectable (required when automatic re-connect is initiated). See Device Info on
page 7-34.
2.
Ensure that the remote Bluetooth device is in discoverable mode. See the devices user manual for
instructions.
3.
Ensure that the A2DP/AVRCP profile is enabled on the MC67. See Profiles on page 7-41 for more
information.
4.
Tap Menu > New Connection.
5.
Select Connect to High-Quality Audio from the drop-down list.
6.
Tap Next.
7.
Select the device and tap Next.
8.
Enter the PIN Code for the remote device and then tap OK. The Connection Favorite Options window
appears.
9.
Tap Next.
10. Tap Connect. The MC67 connects to the high-quality audio headset.
For stereo headsets that can use hands-free services, connect to the hands-free service after connecting to
the A2DP service:
1.
Tap Menu > New Connection.
2.
Select Connect to Headset from the drop-down list.
3.
Tap Next.
4.
Select the stereo headset and tap Next.
5.
Select the Hands-Free unit service and then tap Next.
6.
Tap Next.
7 - 32 MC67 User Guide
7.
Tap Connect.
Connect to a HID Device
The MC67 can connect to an Human Interface Device (HID) device such as a Bluetooth keyboard:
1.
Ensure the MC67 is connectable (required when automatic re-connect is initiated). See Device Info on
page 7-34.
2.
Ensure that the remote Bluetooth device is in discoverable mode. See the device user manual for
instructions.
3.
Ensure that the HID Client profile is enabled on the MC67. See Profiles on page 7-41 for more information.
4.
Tap Menu > New Connection.
5.
Select Explore Services on Remote Device from the drop-down list.
6.
Tap Next.
7.
Select the device and tap Next.
8.
Select the service and tap Next.
9.
The Connection Favorite Options window appears.
10. Tap Next.
11. Tap Connect. The MC67 connects to the HID device.
Pairing with Discovered Device(s)
A pair is a relationship created between the MC67 and another Bluetooth device in order to exchange
information in a secure manner. Creating a pair involves entering the same PIN on both devices. After creating
a pair and turning on the Bluetooth radios, the devices recognize the pair and can exchange information
without re-entering a PIN.
To pair with a discovered Bluetooth device:
NOTE If favorite connections have already been created, the Favorites screen displays. If no favorite
connections have been created, the New Connection Wizard screen displays.
1.
Tap
> Settings > Connections > Bluetooth. The BTExplorer window appears.
2.
Tap Menu > New Connection. The New Connection Wizard window appears.
3.
In the drop-down list, select Pair with Remote Device.
4.
Tap Next. The Select Remote Device window appears.
NOTE Devices discovered previously are listed to save time. To start a new device discovery, tap and hold on the list
area and select Discover Devices from the pop-up menu.
Bluetooth 7 - 33
Figure 7-32 Select Remote Device Window
5.
Select a device from the list and tap Next. The PIN Code Request window appears.
Figure 7-33 PIN Request Window
6.
In the PIN Code field, enter the PIN code.
7.
Tap OK. The Pairing Status window displays.
8.
Tap Finish. The devices are successfully paired. The device name moves to the Trusted Devices window.
Deleting a Paired Device
To delete a device no longer needed:
1.
Tap the Bluetooth icon and select Show BTExplorer. The BTExplorer window appears.
2.
Tap Menu > Trusted Devices. The Trusted Devices window appears.
3.
Tap and hold on the device select Delete Link Key in the pop-up menu.
4.
A confirmation dialog appears. Tap Yes.
Accepting a Pairing
When a remote device wants to pair with the MC67, enter a PIN when requested to grant permission.
1.
Ensure that the MC67 is set to discoverable and connectable. See Bluetooth Settings on page 7-34. When
prompted to bond with the remote device the PIN Code Request window appears.
7 - 34 MC67 User Guide
Figure 7-34 PIN Code Request Window
2.
In the PIN Code: text box, enter the same PIN entered on the device requesting the bond. The PIN must
be between 1 and 16 characters.
3.
In the Device Name: text box, edit the name of the device requesting the bond, if desired.
4.
Tap OK to create the bond. The MC67 can now exchange information with the other device.
Bluetooth Settings
Use the BTExplorer Settings window to configure the operation of the BTExplorer application. Tap Menu >
Settings.
Device Info
Use Device Info to configure the MC67’s Bluetooth connection modes.
Table 7-3 Device Info Data
Item
Description
Device Name
Displays the name of the MC67.
Discoverable Mode
Select whether or not the MC67 is discoverable by other Bluetooth devices.
Connectable Mode
Select whether or not the MC67 is connectable by other Bluetooth devices.
Services
NOTE Ensure that the MC67 is discoverable and connectable when remote devices use MC67 services.
Use Services to add or delete Bluetooth services.
Bluetooth 7 - 35
Figure 7-35 BTExplorer Settings - Services
To add a service:
1.
Tap Add.
Figure 7-36 Add Local Service Window
2.
In the list, select a service to add.
3.
Tap OK. The Edit Local Service window displays for the selected service.
4.
Select the appropriate information and then tap OK. See the following sections for information on the
available services.
Dial-Up Networking Service
Dial-up Networking allows other Bluetooth devices to access a dial-up modem.
Table 7-4 Dial-up Networking Information Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate,
or Authenticate/Encrypt.
7 - 36 MC67 User Guide
Table 7-4 Dial-up Networking Information Data
Item
Description
Local COM Port
Select the COM port.
Local Baud Rate
Select the communication baud rate.
Local Port Options
Select the port option.
File Transfer Service
File transfer allows other Bluetooth devices to browse files.
Figure 7-37 BTExplorer Settings - File Transfer Information
Table 7-5 File Transfer Information Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None,
Authenticate, or Authenticate/Encrypt.
Root Directory
Select the directory that other Bluetooth devices can access.
File Permissions
Select the file permissions for the selected directory. Check the appropriate box
to grant read access, write access, and delete access.
Hands-Free Audio Gateway Service
Hands-Free Service Audio Gateway allows connection to hands-free devices.
Table 7-6 Hands-Free Audio Gateway Data
Item
Service Name
Description
Displays the name of the audio service.
Headset Audio Gateway Service
Headset Service Audio Gateway allows connection to headset devices.
Bluetooth 7 - 37
Table 7-7 Headset Audio Gateway Data
Item
Description
Service Name
Displays the name of the audio service.
IrMC Synchronization Service
The IrMC Synchronization service used to synchronize PIM contacts between a remote device and the MC67.
Table 7-8 IrMC Synchronization Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate,
or Authenticate/Encrypt.
Phonebook
Select the Phonebook checkbox to allow synchronization with the MC67’s contacts.
Select Read, Write, Create and/or Delete to allow phonebook permissions.
Calendar
Select the Calendar checkbox to allow synchronization with the MC67’s calendar.
Select Read, Write, Create and/or Delete to allow calendar permissions.
OBEX Object Exchange Service
OBEX Object Exchange allows other Bluetooth devices to push contacts, business cards, pictures,
appointments, and tasks to the MC67.
Table 7-9 OBEX Exchange Information Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are
None, Authenticate, or Authenticate/Encrypt.
Business Card
Select Contact entry.
Do not allow clients to push objects
Disables clients from pushing objects to the MC67.
Inbox Directory
Select a directory where another Bluetooth device can store files.
Personal Area Networking Service
Personal Area Networking hosts a Personal Area Network which allows communication with other Bluetooth
devices.
7 - 38 MC67 User Guide
Table 7-10 Personal Area Networking Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None,
Authenticate, or Authenticate/Encrypt.
Support Group Ad-Hoc
Networking
Select to enable Ad-Hoc networking.
Serial Port Service
Serial port allows other Bluetooth devices to access COM ports.
Table 7-11 Serial Port Services Data
Item
Description
Service Name
Displays the name of the service.
Service Security
Select the type of security from the drop-down list. Options are None, Authenticate,
or Authenticate/Encrypt.
Local COM Port
Select the COM port.
Local Baud Rate
Select the communication baud rate.
Local Port Options
Select the port option.
A2DP Service
Advanced Audio Distribution (A2DP) hosts connects from Bluetooth devices supporting high-quality stereo
audio.
Table 7-12 Advanced Audio Distribution Data
Item
Service Name
Description
Displays the name of the audio service.
AVRCP Service
Audio Video Remote Control (AVRCP) hosts connections from Bluetooth devices supporting audio
remote-control functionality.
Table 7-13 Audio Video Remote Control Data
Item
Service Name
Description
Displays the name of the audio service.
Bluetooth 7 - 39
Security
Security settings allows the user to set global security policies for Bluetooth. Note that these settings are only
active on local Services that are set to Authenticate or Authenticate/Encryption. The user can set
authentication on local Services under Services.
To adjust the security settings for an individual service, select Services first, then select the individual service,
then Properties.
Figure 7-38 BTExplorer Settings - Security
NOTE To use PIN Code, select Authenticate or Authenticate/Encrypt from the Service Security drop-down
list on each local service.
Table 7-14 Security Data
Item
Description
Use PIN Code (Incoming
Connection)
Select for automatic use of the PIN code entered in the PIN Code text
box. It is recommended not to use this automatic PIN code feature. See
Security on page 7-2 for more information.
PIN Code
Enter the PIN code.
Encrypt Link On All Outgoing
Connections
Select to enable or disable encryption on all outgoing connections to
other Bluetooth devices.
Discovery
Use Discovery to set and modify discovered devices.
7 - 40 MC67 User Guide
Figure 7-39 BTExplorer Settings - Discovery
Table 7-15 Discovery Data
Item
Description
Inquiry Length
Sets the amount of time the MC67 takes to discover Bluetooth devices in
the area.
Name Discovery Mode
Select either Automatic or Manual to automatically attempt to discover
a Bluetooth device's name after finding the device.
Discovered Devices - Delete
Devices
Deletes all discovered devices and link keys from memory.
Discovered Devices - Delete
Linked Keys
Removes all pairing from remote Bluetooth devices, and makes them all
un-trusted.
Virtual COM Port
Virtual COM Port defines which COM ports BTExplorer attempts to use for virtual COM ports. Check the
appropriate checkbox to use the port as a virtual COM port. When finished, choose Apply to enforce changes,
or Revert to restore the original settings.
Table 7-16 Virtual COM Port Data
Item
Description
COM5:Bluetooth
Enable or disable COM Port 5.
COM9:Bluetooth
Enable or disable COM Port 9.
COM11:Bluetooth
Enable or disable COM Port 11.
COM21:Bluetooth
Enable or disable COM Port 21.
COM22:Bluetooth
Enable or disable COM Port 22.
COM23:Bluetooth
Enable or disable COM Port 23.
HID
Use HID to select The Human Interface Device Profile programming interface that defines the protocols and
procedures to be used to implement HID capabilities.
Bluetooth 7 - 41
Provides support for devices such as mice, joysticks, keyboards.
Table 7-17 HID Data
Item
Description
Enable Key Repeat
Enables key repeat functionality.
Delay
To increase key repeat delay, drag the Delay slider to the right. To
decrease key repeat delay, drag the Delay slider to the left.
Rate
To increase key repeat speed, drag the Rate slider to the left. To
decrease key repeat speed, drag the Rate slider to the right.
Profiles
Use Profile to load or remove Bluetooth services profiles. If a profile is not used, it can be removed to save
memory.
1.
Tap a check box next to the profile to load (activate).
The Serial Port profile is always active and cannot be removed.
2.
Tap Select All to select all profiles or tap Deselect All to deselect all profiles.
3.
Tap Apply to activate the profiles and then Close to exit the application.
System Parameters
Use System Parameters to set device connection settings.
Table 7-18 System Parameters Data
Item
Description
Page Timeout
Sets the amount of time the MC67 searches for a device before moving
on the next device.
Link Supervision Timeout
Sets the amount of time that the MC67 will wait for a device to come back
into range after it has gone out of range. If the device does not come back
into range by the set time, the MC67 drops the connection.
Miscellaneous
Use Miscellaneous to set color and types to better view active connections.
Table 7-19 Miscellaneous Data
Item
Description
Highlight Connections
Select the connection type to highlight when connected. In the Wizard
Mode, the only options are Favorites or None. In the Explorer Mode the
options are None, Tree View Only, List View Only, or Tree and List
View.
Apply Text Style
Select the text style to apply to the connection text.
Apply Text Color
Select the text color to apply to the connection text.
7 - 42 MC67 User Guide
CHAPTER 8
USING GPS NAVIGATION
Introduction
The MC67 includes Global Positioning System (GPS) technology. GPS technology is based on a worldwide
system of GPS satellites orbiting the earth that continuously transmit digital radio signals. These radio signals
contain data on the satellites’ locations and their exact clock time and are used to determine the user location
on the earth.
WARNING!
When using the MC67 in a vehicle, it is the user’s responsibility to place, secure and use in a
manner that will not cause accidents, personal injury or property damage or obstruct their
view. It is the responsibility of the driver to operate the vehicle in a safe manner, maintain
observation of all driving conditions at all times, and not become distracted by the device to
the exclusion of safe driving practices. It is unsafe to operate the controls of the device while
driving.
Software Installation
Third-party GPS navigation software is required. Evaluation software is available from various suppliers. For
example; VisualGPS, visit: http://www.visualgps.net/VisualGPSce/
If interested in purchasing GPS navigation software check with the GPS software vendor (before purchasing,
downloading, or installing any software) to determine that the application is compatible with the MC67. Refer to
the application’s user guide for application installation and setup information.
MC67 GPS Setup
The GPS-enabled MC67 automatically manages access to the GPS receiver to allow multiple programs to
simultaneously access GPS data.
By default, the MC67 has the following settings:
1. Tap
> Settings > System > External GPS.
2. In the Programs tab, the GPS program port is set to COM8.
8-2
MC67 User Guide
3. In the Hardware tab, the GPS hardware port is set to None.
Operation
Acquiring satellite signals may take several seconds to a few minutes. It is best to be outside and have a clear,
unobstructed view of the sky. Without a clear view, acquisition takes much longer and could result in the MC67
being unable to compute the initial position quickly. When operating the device indoors access to the GPS
signals may be limited or unavailable.
NOTE When using a GPS navigation application, ensure that the MC67 does not go into suspend mode. If the MC67
suspends then the power to the GPS radio is removed. Upon resume the GPS receiver must reacquire a valid
GPS signal, resulting in a a delay of positional information.
GPS Maps on microSD Cards
GPS navigation software vendors may sell maps on microSD cards. If using a microSD card with the GPS
navigation software install the microSD memory card using procedure in Installing a microSD Card on page
1-2.
Answering a Phone Call While Using GPS
If receiving an incoming phone call while using GPS navigation software:
1.
Answer the phone call by pressing the Answer button.
2.
Once the phone call ends, press the End Call button to resume the audio on the GPS software.
NOTE Anytime using GPS on the MC67 and the user receives a phone call, the audio on the GPS navigation
software is muted until the user finishes the call.
Losing the GPS Signal While in a Vehicle
GPS performance on the MC67 may be affected if the vehicle has thermal glass windows and windshields,
which can block the MC67 from receiving a GPS signal from satellites. To improve GPS signal strength, place
the MC67 where there is a clear view of the sky. A direct line of sight is required between the MC67 and the
GPS satellites to access information from the satellites.
Assisted GPS
GPS can be used in stand-alone or Assisted GPS (A-GPS) modes. A Stand-alone GPS receiver downloads
data from GPS satellites. It can take several minutes to get a fix. By using GPS Location servers, A-GPS
dramatically improves the performance of the Time To First Fix (TTFF) of GPS receivers by providing them with
data that they would ordinarily have to download from the GPS satellites and other aiding data that helps the
acquisition. With the A-GPS data, GPS receivers can operate faster and more reliably.
A-GPS follows the Secure User Plane Location (SUPL) protocol which allows the MC67 to communicate with a
location server.
To configure SUPL on the MC67:
1.
Tap
> Settings > System > GPS Setup icon.
Using GPS Navigation
8-3
Figure 8-1 SUPL Setup Tab
2.
Select Enable SET Initiated SUPL on Opening to enable the MC67 to initiate SUPL upon opening the
GPS port.
3.
Select Using Motorola Server to use the Motorola SUPL server.
4.
Enter the SUPL Server IP address in the Server IP field. The server IP address is not required when using
the Motorola server.
5.
Enter the SUPL Server port number in the Port field. The port number is not required when using the
Motorola server.
6.
User ID type is to choose which ID type to use during the SUPL session. This option is not available when
using the Motorola server.
8-4
MC67 User Guide
CHAPTER 9
SETTINGS
This chapter provides information for customizing the MC67.
Settings Folder
Table 9-1 lists setting applications pre-installed on the MC67. Tap
> Settings to open the Settings tab.
Table 9-1 Setting Applications
Icon
Description
Icon
Description
Clock & Alarms - Set the device clock to
the date and time of the current location.
Alarms can also be set at specified days
and times of a week.
Lock - Set a password for the MC67.
Home - Customize the appearance of the
Home screen and the information to display
on it.
Sounds & Notifications - Enable sounds
for events, notifications, and more, and set
the type of notification for different events.
Connections Folder - Contains connection
setting applications.
System Folder - Contains system setting
applications.
Personal Folder - Contains personal
setting applications.
Connections Folder
Beam - Set the MC67 to receive incoming
IrDA beams.
Connections - Set up one or more types of
modem connections for the device, such as
phone dial-up, cellular, Bluetooth, and
more, so that the MC67 can connect to the
Internet or a private local network.
9-2
MC67 User Guide
Table 9-1 Setting Applications (Continued)
Icon
Description
Icon
Description
Bluetooth - Turn on Bluetooth, set the
MC67 to visible mode and scan for other
Bluetooth devices in the area.
Domain Enroll - Make the device an AD
domain member for device management
and security.
Wi-Fi - Setup wireless network connection
and customize settings.
USB to PC - Need info
Wireless Manager - Enables or disables
the MC67’s wireless radios and customizes
Wi-Fi, Bluetooth and Phone settings.
Personal Folder
Buttons - Assign a program to a button.
Phone - Configure the phone.
Owner Information - Enter personal
information on the MC67.
System Folder
About - View basic information such as the
Windows Embedded handheld version and
type of processor used on the MC67.
Certificates - See information about
certificates installed on the MC67.
Backlight - Set backlight settings. Refer to
Backlight Settings on page 9-5.
Customer Feedback - Submit feedback on
the Windows Mobile 6 software.
Encryption - Allow files on a storage card
to be encrypted. Encrypted files are
readable only on the device.
DataWedge - Enable data capture using the
camera or imager.
Error Reporting - Enable or disable the
Microsoft’s error reporting function.
GPS Setup - View GPS SUPL information.
See MC67 GPS Setup on page 8-1.
External GPS - Set the appropriate GPS
communication ports, if required. Refer to
MC67 GPS Setup on page 8-1.
IST Settings - Set the appropriate setting
for configuring the MC67’s Interactive
Sensor Technology. Refer to IST Settings
on page 9-8.
Managed Programs - Displays the
programs that were installed on the MC67
using Mobile Device Manager.
Keylight - Set the keypad backlight
time-out. Refer to Keypad Backlight
Settings on page 9-5.
Memory - Check the device memory
allocation status and memory card
information and stop currently running
programs.
Power - Check battery power and set the
time-out for turning off the display to
conserve battery power. Refer to Power
Settings on page 9-4.
Settings
9-3
Table 9-1 Setting Applications (Continued)
Icon
Description
Icon
Description
Phone Info - Displays the MC67’s software
and hardware information.
Regional Settings - Set the regional
configuration to use, including the format for
displaying numbers, currency, date, and
time on the MC67.
Screen - Change the screen orientation,
re-calibrate the screen, and change the
screen text size.
Remove Programs - Remove programs
that were installed on the MC67.
System Info - Obtain system information.
UI Settings - Set Start screen layout and IE
zoom feature. Refer to UI Settings on page
9-6.
Task Manager - Stop running programs.
USBConfig - Configure the MC67 USB
port. Refer to USB Configuration on page
9-5.
9-4
MC67 User Guide
Locking the MC67
Use the Password window to set a password to disable unauthorized access to the MC67.
NOTE If the device is configured to connect to a network, use a strong (difficult to figure out) password to help
protect network security. Password cracking tools continue to improve and the computers used to crack
passwords are more powerful than ever.
If the user enters an incorrect password eight times, the user is requested to enter a code before trying
again.
If the user forgets the password, contact the system administrator.
1.
Tap
> Settings > Lock.
Figure 9-1 Password Window
2.
Select Prompt if device unused for check box to enable password protection.
3.
From the drop-down list, select a time value for the protection to take affect after non-use.
4.
From the Password type: drop-down list, select either Simple PIN or Strong alphanumeric.
5.
For a simple password, enter a four-digit password in the Password field.
For a stronger password:
a.
Enter a seven character password in the Password: field. A strong password must contain at least
seven characters and contain at least three of the following: uppercase and lowercase letters,
numerals, and punctuation.
b.
Re-enter the password in the Confirm: field.
6.
Tap OK.
7.
Tap OK.
Power Settings
To set the MC67 to turn off after a short period of non-use:
1.
Tap
> Setting > System > Power.
Settings
9-5
2.
Tap the Advanced tab.
3.
Select the On battery power: Turn off device if not used for check box and select a value from the
drop-down list.
4.
Select OK.
Backlight Settings
To change the backlight settings:
1.
Tap
> Settings > System > Backlight > Battery Power tab.
2.
Select the Disable backlight if device is not used for check box and select a value from the drop-down
list.
3.
Select the Brightness tab.
4.
Tap the Backlight Auto Mode check box to disable auto mode.
5.
Tap the Disable backlight check box to turn off the display backlight, or use the slider to set a low value
for the backlight.
6.
Tap the Persist ‘Disable backlight’ setting over reset check box to enable the settings to persist after a
reset.
7.
Tap OK.
Keypad Backlight Settings
To change the keypad backlight settings:
1.
Tap
> Settings > System > Keylight > Battery Power tab.
2.
Select the Disable keylight if device if not used for check box and select a value from the drop-down
list.
3.
Select the Advanced tab.
4.
Tap the Keylight Auto Mode check box to disable auto mode.
5.
Tap the Disable keylight check box to turn off the keypad backlight.
6.
Tap the Persist ‘Disable keylight’ setting over reset check box to enable the settings to persist after a
reset.
7.
Tap OK.
USB Configuration
The MC67 can be placed into any of the following USB modes:
• USB Client - Sets the MC67 to USB Client mode.
• USB Host - Sets the MC67 to USB Host mode.
9-6
MC67 User Guide
• USB On-the-Go - Sets the MC67 to automatically determine necessary mode (default).
To place the MC67 into one of these modes:
1. Tap
> Settings > System > USBConfig.
2. Select one of the USB radio buttons.
3. Tap OK.
UI Settings
Use the UI Settings application to change the grid view in the Start screen and to control Zooming in Internet
Explorer.
Start Screen Settings
To change the grid view of the Start screen:
1.
Tap Start> Settings > System > UI Settings.
2.
Tap the Start Screen Settings tab.
Figure 9-2 Start Screen Settings Tab
3.
Select the number of columns.
4.
Tap OK.
NOTE Tap Reset to return to the default 3 Column setting.
5.
Tap OK.
6.
Preform a warm boot.
IE Zoom Mapping
When Internet Explorer opens, the volume keys on the side of the MC67 are used to zoom in and out. To
disable IE Zoom Mapping:
1.
Tap
> Settings > > System > UI Settings.
Settings
2.
Tap the IE Zoom Mapping tab.
Figure 9-3 IE Zoom Mapping Tab
3.
Select Off.
4.
Tap OK.
5.
Tap OK to turn off mapping.
9-7
9-8
MC67 User Guide
IST Settings
IST Control Panel Applet is an applet which needs to configure all the system wide actions based on IST
sensor events and data. It provides a means to view version information of all the components used in the
sensor system, change Display settings, to configure power management activity, Events notification and
Sensors view. Also it provides facility to visualize sensor data in different ways and configurations required for
sensors such as setting sensor threshold values, sensor calibration and etc.
Info Tab
Use the IST Info tab to view IST software version information.
Figure 9-4 IST Info Tab
Display Tab
Use the Display tab configure display interaction settings.
Figure 9-5 Display Tab
The Auto Orientation parameter controls the display rotation according to the MC67 orientation. Select the
Auto Orientation checkbox to enable this feature. Auto orientation is disabled by default. To manually set the
screen orientation, tap the Manual Setting button.
Power Management Tab
Use the Power Management tab to configure power management settings.
Settings
9-9
Figure 9-6 Power Management Tab
On Face Down
The On Face Down section provides configurable options to control what happens when the MC667 is placed
with the display face down.
Select the Display Off checkbox to turn off the backlight when the MC67 is placed face-down. The backlight
automatically powers on when the MC67 is tuned face-up.
Select the Suspend checkbox to suspend the MC67 when it placed face-down. To wake the MC67 use the
controls listed in the Wake Up on Motion section below.
Keep Alive On Motion
Select the Enabled checkbox to prevent the MC67 from going into suspend mode while it is in motion. The
motion sensitivity is configurable. To set the sensitivity, tap the Change Sensitivity button.
NOTE There is no time out defined for suspend due to IST inactivity. To aggressively manage power, while there
is no motion, set the MC67 suspend time out to a very short time using system power settings. This
setting suspends the MC67 when there is no motion activity or any other activity within this set time out.
Setting Sensitivity
Use the slider to set the sensitivity. A low setting indicates that a harder shake (faster movement) is required
for the IST to initiate a wake up action. The sensitivity can be set from “0” to “10” and when the sensitivity is set
to lower values a simple shake/motion can be detected by IST. A high setting allows IST to issue a wake up
action when an easier movement to the MC67 is detected. Shake the MC67 to test the set sensitivity. An audio
sound is heard and a message is displayed on screen when the shaking level reaches the set sensitivity level.
9 - 10 MC67 User Guide
Figure 9-7 Set IST Sensitivity Window
Events Tab
Use the Event tab to enable or disable free fall sound and facilitates to set the free fall sound file as desired.
Figure 9-8 Event Window
Use the Audible Notification panel to enable playing of a wave file when the MC67 is dropped. Select a
desired .wav file from the Sounds: drop-down list.
Sensors Tab
The Sensor tab displays all the sensors available in the MC67:
• Orientation - displays the orientation of the MC67 in pictorial and graphical views.
• Motion - detects High G or Free Fall of the device. Value 0 is no motion detected. When a Free Fall is
detected sensor Visualize window will play a wave with highest amplitude.
• Acceleration - displays device acceleration along the X, Y and Z axis.
• Tilt Angle - Provide angular rotation with respect to the horizontal plane.
• ALS - Provides light intensity variation with time.
• eCompass - displays the device’s rotation with respect to the earth’s magnetic north.
Tap a sensor icon to display the sensor information screen. Sensor data can be viewed in Graphical or Visual
mode. Sensor Calibration is provided in Settings button if supported.
Settings 9 - 11
Figure 9-9 Sensors Tab
The following sensor information displays for each sensor.
• Sensor Name
• Sensor ID
• Range
• Unit
• Scale
• Connectivity
• Device status.
The Setting button shows if the selected sensor has any parameter that is user configurable including
calibration (if supported). This screen is specific to a particular sensor.
Tap Visualize to display sensor in a pictorial view.
Figure 9-10 Visualize Screen Example
1.
9 - 12 MC67 User Guide
CHAPTER 10
ACCESSORIES
Introduction
MC67 accessories, listed below, provide a variety of product support capabilities.
Accessories
Table 10-1 lists the accessories available for the MC67.
Table 10-1 MC67 Accessories
Accessory
Part Number
Description
Cradles
Single Slot USB Cradle
CRD5500-1000UR
Charges the MC67 main battery and a spare battery.
Synchronizes the MC67 with a host computer through a USB
connection.
Single Slot
Ethernet/Modem/USB
Cradle
CRD5500-1000XR
Charges the MC67 main battery and a spare battery.
Synchronizes the MC67 with a host computer through an
Ethernet, Modem or USB connection.
Four Slot Charge Only
Cradle
CRD5500-4000CR
CRD5501-4000CR
Charges up to four MC67 devices.
Four Slot Ethernet Cradle
CRD5500-4000ER
CRD5501-4000ER
Charges up to four MC67 devices and connects the MC67
with an Ethernet network. CRD5500-4000ER provides up to a
maximum of 100 Mbps. CRD5501-4000ER provides up to a
maximum of 1 Gbps.
Vehicle Cradle
VCD5500-1001R
Installs in a vehicle and charges the MC67 main battery.
Vehicle Holder
VCH5500-1000R
Provides an alternative mounting solution for the MC67 in a
vehicle. Requires the Auto Charge cable for charging the
MC67 battery.
SAC5500-4000CR
Charges up to four MC67 battery packs.
Chargers
Four Slot Spare Battery
Charger
10 - 2 MC67 User Guide
Table 10-1 MC67 Accessories (Continued)
Accessory
Part Number
Description
Power Supply
PWRS-14000-249R
Provides power to the MC67 using the USB Charging Cable
or Charge Only Cable.
Power Supply
PWRS-14000-148R
Provides power to the Single Slot USB cradle and Four Slot
Spare Battery Charger.
Power Supply
PWRS-14000-241R
Provides power to the Four Slot Charge Only cradle or Four
Slot Ethernet cradles.
USB Charging Cable
25-108022-03R
Provides power to the MC67 and USB communication with a
host computer.
Charge Only Cable
25-112560-02R
Connects to a power supply to provide power to the MC67.
Auto Charge Cable
VCA5500-01R
Charges the MC67 using a vehicle’s cigarette lighter.
DC Cable
50-16002-029R
Provides power from the power supply to the Four Slot
cradles.
Spare 3600 mAh lithium-ion
battery
BTRY-MC55EAB02
BTRY-MC55EAB02-10
BTRY-MC55EAB02-50
Replacement 3600 mAh battery.
(10-pack)
(50-pack)
DEX Cable
25-127558-01R
For use with electronic data exchange For example, vending
machines.
USB Client Communication
Cable
25-68596-01R
Provides USB communication between the Single Slot USB
Cradle and a host computer.
Printer Cable
25-136283-01R
Provides connection to a Monarch/Paxar Serial printer.
Trigger Handle
TRG5500-101R
Adds a gun-style handle with a scanning trigger for
comfortable and productive data capture.
Trigger Handle Hand Strap
21-138874-01R
Handstrap for the Trigger handle.
Magnetic Stripe Reader
MSR5500-100R
Captures data from magnetic stripe cards.
Belt Mounted Rigid Holster
SG-MC5511110-01R
Clips onto belt to hold the MC67 when not in use.
Fabric Holster
SG-MC5521110-01R
Soft holder for added protection.
Stylus
KT-119150-03R
KT-119150-50R
Replacement stylus (3-pack).
Replacement stylus (50-pack).
Spring Loaded Stylus
STYLUS-00001-03R
STYLUS-00001-10R
Optional spring loaded stylus (3-pack).
Optional spring loaded stylus (10-pack).
Stylus with Tether
Stylus-00003-03R
Stylus-00003-50R
Spare stylus with tether (3-pack).
(50-pack).
Spare Tether
KT-122621-03R
KT-122621-50R
Replacement tether (3-pack).
(50-pack).
Handstrap
SG-MC5523341-03R
Replacement handstrap with pin
Wall Mounting Kit
KT-136648-01R
Use for wall mounting the four slot cradles.
Screen Protector
KT-137521-03R
Package of 3 screen protectors.
Miscellaneous
Accessories 10 - 3
Single Slot USB Cradle
This section describes how to use a Single Slot USB cradle with the MC67. For USB communication setup
procedures refer to the MC67 Integrator Guide.
The Single Slot USB Cradle:
• Provides 5.4 VDC power for operating the MC67.
• Synchronizes information between the MC67 and a host computer. Refer to the MC67 Integrator Guide
for information on setting up a partnership between the MC67 and a host computer.
• Charges the MC67’s battery.
• Charges a spare battery.
Charging the MC67 Battery
Connect the cradle to power. Insert the MC67 into the slot to begin charging.
Charging/Battery Status LED
Figure 10-1 MC67 Battery Charging
10 - 4 MC67 User Guide
Charging the Spare Battery
Spare Battery
Spare Battery
Charging LED
Figure 10-2 Spare Battery Charging
Battery Charging Indicators
The Single Slot USB Cradle charges the MC67’s main battery and a spare battery simultaneously.
The MC67’s charge LED indicates the status of the battery charging in the MC67. See Table 1-1 on page 1-6
for charging status indications.
The spare battery charging LED on the cradle indicates the status of the spare battery charging in the cradle.
See Table 10-2 for charging status indications.
The 3600 mAh battery fully charges in less than six hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC67 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See Table 1-1 on page 1-6 and Table 10-2.
Table 10-2
Spare Battery LED Charging Indicators
Spare Battery LED
(on cradle)
Indication
Off
Battery is not charging; battery is not inserted correctly in the cradle; cradle
is not powered
Slow Blinking Amber
Spare battery is charging.
Solid Amber
Charging complete.
Fast Blinking Amber
Charging error.
Accessories 10 - 5
Single-slot Ethernet/Modem/USB Cradle
The CRD5500-1000XR cradle provides connection to a host computer using USB, a dial-up network using the
modem or an Ethernet network.
Refer to the MC67 Integrator Guide for information on setting up the cradle.
Country Settings
The modem defaults to operation with US telephone networks. To operate the modem with other country
telephone networks, it must be configured using an application on the MC67. Download the Cradle Modem
Country Configurator Application Software for MC55xx package from the Motorola Support Central web site:
http://supportcentral.motorola.com.
Following the instructions with the software package to install the application on the MC67.
The application includes country selections for all supported countries and automatically programs the modem
and adjust its operating parameters to comply with the telephone network in the selected country.
Connection Setup
AC Line Cord
Ethernet Hub
Power
Supply
USB Port
Phone Port
Ethernet Port
Figure 10-3 Connection Setup
Modem USB Ethernet
Figure 10-4 Connection Switch
Power Port
10 - 6 MC67 User Guide
Indicators
Spare Battery
Charging
LED
Ethernet/Modem LED
Speed LED
Link LED
Figure 10-5 Indicators
• Spare Battery Charging LED - Indicates the charging status of the spare battery.
• Ethernet/Modem LED - Blink whenever Ethernet or modem connectivity is established.
• Speed LED (green) - Indicates that the transfer rate is 100 Mbps. When it is not lit it indicates that the
transfer rate is 10 Mbps.
• Link LED (yellow) - Blinks to indicate activity, or stays lit to indicate that a link is established. When it is
not lit it indicates there is no link.
Operation
NOTE The CRD5500-1000XR does not support hot swapping between operational modes. After moving the
switch into a different position, remove the MC67 from the cradle and then re-insert into the cradle.
Ethernet Connection
Place the Connection switch on the bottom of the cradle to the Ethernet position.
Place the MC67 into the cradle.
To test the connection, tap
> Programs > Internet Explorer. Enter a web address.
Modem Connection
Place the Connection switch on the bottom of the cradle to the Modem position.
Place the MC67 into the cradle.
The MC67 dials the phone number and connects to the web site.
Accessories 10 - 7
Four Slot Charge Only Cradle
This section describes how to set up and use a Four Slot Charge Only cradle with the MC67.
The Four Slot Charge Only cradle:
• Provides 5.4 VDC power for operating the MC67.
• Simultaneously charges up to four MC67 devices.
Charging
Insert the MC67 into a slot to begin charging.
Figure 10-6 MC67 Battery Charging
Battery Charging Indicators
The MC67’s charge LED shows the status of the battery charging in the MC67. See Table 1-1 on page 1-6 for
charging status indications.
The 3600 mAh battery fully charges in less than six hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC67 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See Table 1-1 on page 1-6.
10 - 8 MC67 User Guide
Four Slot Ethernet Cradle
This section describes how to use a Four Slot Ethernet cradle with the MC67. For cradle communication setup
procedures refer to the MC67 Integrator Guide.
The Four Slot Ethernet cradle:
• Provides 5.4 VDC power for operating the MC67.
• Connects the MC67 (up to four) to an Ethernet network.
• Simultaneously charges up to four MC67 devices.
Charging
Insert the MC67 into a slot to begin charging.
100
Mbps
Green Speed LED (CRD5500-4000ER)
Green Left LED (CRD5501-4000ER)
Yellow Link LED (CRD5500-4000ER)
Green Right LED (CRD5501-4000ER)
Figure 10-7 MC67 Battery Charging
The MC67’s charge LED shows the status of the battery charging in the MC67. See Table 1-1 on page 1-6 for
charging status indications. The 3600 mAh battery fully charges in less than six hours.
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 alternately enables and disables battery charging to
keep the battery at acceptable temperatures. The MC67 indicates when charging is disabled due to abnormal
temperatures via its LED. See Table 1-1 on page 1-6.
Accessories 10 - 9
Communication
Insert the MC67 into the slot to initiate communication over an Ethernet network. The LEDs on the front of the
cradle indicate the speed and activity of the connection.
LED Indicators (CRD5500-4000ER)
There are two LEDs on the front of the cradle. The green Speed LED lights to indicate that the transfer rate is
100 Mbps. When the LED is not lit the transfer rate is 10 Mbps. The yellow Link LED blinks to indicate activity,
or stays lit to indicate that a link is established. When it is not lit it indicates that there is no link.
Table 10-3 CRD5500-4000ER LED Data Rate Indicators
Data Rate
Green Speed LED (Left)
Yellow Link LED (Right)
100 Mbps
On
On/Blink
10 Mbps
Off
On/Blink
LED Indicators (CRD5501-4000ER)
There are two green LEDs on the front of the cradle. These green LEDs light and blink to indicate the data
transfer rate. When the LEDs are not lit the transfer rate is 10 Mbps.
Table 10-4 CRD5501-4000ER LED Data Rate Indicators
Data Rate
Left LED (Green)
Right LED (Green)
1 Gbps
On/Blink
Off
100 Mbps
Off
On/Blink
10 Mbps
Off
Off
10 - 10 MC67 User Guide
Magnetic Stripe Reader
The MSR snaps on to the bottom of the MC67 and removes easily when not in use. When attached to the
MC67, the MSR allows the MC67 to capture data from magnetic stripe cards. With the MSR attach, the MC67
can still be charged by placing the MC67 with MSR into a cradle or connecting to a charging cable.
Attaching and Removing the MSR
To attach, slide the MSR onto the bottom of the MC67 and secure by snapping the arms into the MC67
housing.
Figure 10-8 MSR Installation
To remove the MSR open the arms and pull the MSR from the MC67.
NOTE When attaching a cable with a cup connector through the MSR to charge the device, you cannot swipe
cards.
Using the MSR
Install an MSR enabled application onto the MC67.
To use the MSR:
1.
Attach the MSR to the MC67.
Accessories 10 - 11
2.
Power on the MC67.
3.
Launch the MSR application.
4.
Swipe the magnetic stripe card through the MSR, with the magnetic stripe on the card facing down. Swipe
the card in either direction, from left to right or from right to left. For best results, gently press down on the
card while swiping to ensure contact with the bottom of the reader.
5.
The application indicates if the data has been read correctly.
10 - 12 MC67 User Guide
VCD5000 Vehicle Cradle
This section describes how to use a VCD5000 vehicle cradle with the MC67. For cradle installation and
communication setup procedures refer to the MC67 Integrator Guide.
Once installed in a vehicle, the cradle:
• holds the MC67 securely in place
• provides power for operating the MC67
• re-charges the battery in the MC67.
Charging the MC67 Battery
Insert the MC67 into the vehicle cradle to begin charging. A click indicates that the MC67 button release
locking mechanism is enabled and the MC67 is locked in place.
Figure 10-9 MC67 Battery Charging
CAUTION
Ensure the MC67 is fully inserted in the cradle. Lack of proper insertion may result in property damage
or personal injury. Motorola is not responsible for any loss resulting from the use of the products while
driving.
Removing the MC67
To remove the MC67, hold back the release lever on the cradle and pull the MC67 up and out of the cradle.
Accessories 10 - 13
Release Lever
Figure 10-10 Removing the MC67
Battery Charging Indicators
The MC67’s charge LED indicates the status of the battery charging in the MC67. See Table 1-1 on page 1-6
for charging status indications.
The 3600 mAh battery fully charges in less than six hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 alternately enables and disables battery charging to
keep the battery at acceptable temperatures. The MC67 indicates when charging is disabled due to abnormal
temperatures via its LED. See Table 1-1 on page 1-6.
10 - 14 MC67 User Guide
Four Slot Battery Charger
This section describes how to use the Four Slot Battery Charger to charge up to four MC67 batteries.
Battery Charging
1.
Connect the charger to a power source.
2.
Insert the battery into a battery charging well and gently press down on the battery to ensure proper
contact.
Battery
Battery Charging
LEDs (4)
Figure 10-11 Four Slot Battery Charger
Battery Charging Indicators
The charger has an amber LED for each battery charging well. See Table 10-5 for charging status indications.
The 3600 mAh battery fully charges in less than six hours.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the charger alternately enables and disables battery charging to
keep the battery at acceptable temperatures. The charger indicates when charging is disabled due to abnormal
temperatures via its LED. See Table 10-5.
Accessories 10 - 15
Table 10-5
Battery LED Charging Indicators
LED
Indication
Off
No battery in slot; battery is not charging; battery is not inserted correctly in the charger;
charger is not powered.
Slow Blinking Amber
Battery is charging.
Solid Amber
Charging complete.
Fast Blinking Amber
Charging error.
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
• USB Charging cable
• Provide the MC67 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC67 and a host computer. With customized or third party
software, it can also synchronize the MC67 with corporate databases.
• Charge Only cable
• Provide the MC67 with operating and charging power when used with the Motorola approved power
supply.
• Auto Charge cable.
• Provide the MC67 with operating and charging power when used with the Motorola approved power
supply.
• DEX cable
• Provides communication with electronic data exchange devices, such as vending machines.
Battery Charging and Operating Power
The communication/charge cables can charge the MC67 battery and supply operating power.
To charge the MC67 battery:
1.
Connect the communication/charge cable power input connector to the Motorola approved power source.
2.
Slide the bottom of the MC67 into the connector cup end of the communication/charge cable and gently
press in until it latches into the MC67.
3.
Slide the two locking tabs up until they both lock into position.
10 - 16 MC67 User Guide
Locking Tab
Figure 10-12 Cable Cup Locking Tabs
The MC67 amber Charge LED indicates the MC67 battery charging status. The 3600 mAh standard
battery charges in less than six hours. See Table 1-1 on page 1-6 for charging status indications.
4.
When charging is complete, push the two locking tab down and remove the cable from the MC67.
LED Charge Indications
The amber Charge LED on the MC67 indicates battery charging status. See Table 1-1 on page 1-6 for charging
status indications.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The MC67 or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See Table 1-1 on page 1-6.
Accessories 10 - 17
Trigger Handle
The TRG5500 Trigger Handle adds a gun-style handle with a scanning trigger to the MC67. It increases
comfort when using the MC67 in scan-intensive applications for extended periods of time.
Latch
Trigger
Release Button
Figure 10-13 Trigger Handle Features
Inserting the MC67 into the Trigger Handle
Slide the MC67 into the Trigger Handle until it locks in place. The latches secure the MC67 to the Trigger
Handle.
Figure 10-14 Installing the MC67
Removing the MC67
To remove the MC67, press the release buttons and pull the MC67 forward.
Scanning
To scan bar codes:
NOTE A scanning application must be installed prior to scanning a bar code.
10 - 18 MC67 User Guide
1.
Start the MC67’s scanning application.
2.
Aim the MC67 at the bar code.
3.
Press the trigger on the handle. The Scan/Decode LED lights and a beep sounds to indicate a successful
decode.
Figure 10-15 Scanning with the Trigger Handle
Accessories 10 - 19
Using the RS507 Hands-free Imager
An RS507 Hands-free Imager can be used with the MC67 to capture bar code data.
To set up the MC67 and RS507:
1.
Tap
> BTScannerCtlPanel icon.
2.
Select the BT Scanner checkbox and then select the appropriate Com port from the drop-down list.
3.
Tap Save and Exit.
4.
Tap
5.
Tap Pairing Barcode. A bar code displays.
> MotoBTUI.
Figure 10-16 Pairing Bar Code
6.
Point the RS507 at the bar code. The RS507 reads the bar code and begins pairing with the MC67. If
required, enter PIN (12345). Tap Yes.
7.
If using DataWedge, configure DataWedge to use the Bluetooth SSI Scanner Driver. See DataWedge on
page 3-4 for setup instructions.
8.
Launch a scanning enabled application or DataWedge.
9.
Point the RS507 at a bar code to read the bar code data.
Refer to the RS507 Hands-free Imager Product Reference Guide for more information.
10 - 20 MC67 User Guide
CHAPTER 11
MAINTENANCE &
TROUBLESHOOTING
Introduction
This chapter includes instructions on cleaning and storing the MC67, and provides troubleshooting solutions
for potential problems during MC67 operation.
Maintaining the MC67
For trouble-free service, observe the following tips when using the MC67:
• Do not scratch the screen of the MC67. When working with the MC67, use the supplied stylus or
plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen or pencil or
other sharp object on the surface of the MC67 screen.
Motorola recommends using a screen protector, p/n KT-129195-01R.
• The touch-sensitive screen of the MC67 is glass. Do not to drop the MC67 or subject it to strong impact.
• Protect the MC67 from temperature extremes. Do not leave it on the dashboard of a car on a hot day,
and keep it away from heat sources.
• Do not store or use the MC67 in any location that is dusty, damp, or wet.
• Use a soft lens cloth to clean the MC67. If the surface of the MC67 screen becomes soiled, clean it with
a soft cloth moistened with a diluted window-cleaning solution.
• Periodically replace the rechargeable battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.
11 - 2 MC67 User Guide
• A screen protector is applied to the MC67. Motorola recommends using this to minimize wear and tear.
Screen protectors enhance the usability and durability of touch screen displays. Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface with tactile feel
• Abrasion and chemical resistance
• Glare reduction
• Keeping the device’s screen looking new
• Quick and easy installation.
Removing the Screen Protector
A screen protector is applied to the MC67. Motorola recommends using this to minimize wear and tear. Screen
protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift
it off the display.
Lift Screen
Protector
Corner
Figure 11-1 Removing the Screen Protector
CAUTION
Do not use a sharp object to remove the protector. Doing so can damage the touch panel.
NOTE Not using a screen protector can affect warranty coverage. To purchase replacement protectors, contact
a local account manager or Motorola Solutions, Inc. These include screen protector installation
instructions. Part number: KT-129195-01R Screen Protector 3/pk.
Battery Safety Guidelines
• The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non commercial
environment.
• Follow battery usage, storage, and charging guidelines found in the user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
Maintenance & Troubleshooting 11 - 3
• To charge the mobile device battery, the battery and charger temperatures must be between +32 ºF and
+104 ºF (0 ºC and +40 ºC)
• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a
risk of fire, explosion, leakage, or other hazard. If the user has any questions about the compatibility of a
battery or a charger, contact Motorola Solutions Global Customer Support.
• For devices that utilize a USB port as a charging source, the device shall only be connected to products
that bear the USB-IF logo or have completed the USB-IF compliance program.
• To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all batteries will
carry a Motorola hologram. Do not fit any battery without checking it has the Motorola authentication
hologram.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to
overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to
water or other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle
or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to properly dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact
has been made, wash the affected area with large amounts of water and seek medical advice.
• If the user suspects damage to the equipment or battery, contact Motorola Solution Global Customer
Support to arrange for inspection.
Cleaning
CAUTION
Always wear eye protection.
Read warning label on compressed air and alcohol product before using.
If the user has to use any other solution for medical reasons please contact Motorola for more
information.
WARNING! Avoid exposing this product to contact with hot oil or other flammable liquids. If such
exposure occurs, unplug the device and clean the product immediately in accordance with
these guidelines.
Approved Cleanser Active Ingredients
100% of the active ingredients in any cleaner must consist of one or some combination of the following:
isopropyl alcohol, bleach/sodium hypochlorite, hydrogen peroxide or mild dish soap.
11 - 4 MC67 User Guide
Harmful Ingredients
The following chemicals are known to damage the plastics on the MC67 and should not come in contact with
the device: ammonia solutions, compounds of amines or ammonia; acetone; ketones; ethers; aromatic and
chlorinated hydrocarbons; acqueous or alcoholic alkaline solutions; ethanolamine; toluene; trichloroethylene;
benzene; carbolic acid and TB-lysoform.
Cleaning Instructions
Do not apply liquid directly to the MC67. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the
device in the cloth or wipe, but gently wipe the unit. Be careful not to let liquid pool around the display window
or other places. Allow the unit to air dry before use.
Special Cleaning Notes
Many vinyl gloves contain phthalate additives, which are often not recommended for medical use and are
known to be harmful to the housing of the MC67. The MC67 should not be handled while wearing vinyl gloves
containing phthalates, or before hands are washed to remove contaminant residue after gloves are removed. If
products containing any of the harmful ingredients listed above are used prior to handling the MC67, such as
hand sanitizer that contain ethanolamine, hands must be completely dry before handling the MC67 to prevent
damage to the plastics.
Materials Required
• Alcohol wipes
• Lens tissue
• Cotton tipped applicators
• Isopropyl alcohol
• Can of compressed air with a tube.
Cleaning the MC67
Housing
Using the alcohol wipes, wipe the housing including keys and in-between keys.
Display
The display can be wiped down with the alcohol wipes, but care should be taken not to allow any pooling of
liquid around the edges of the display. Immediately dry the display with a soft, non-abrasive cloth to prevent
streaking.
Scanner Exit Window
Wipe the scanner exit window periodically with a lens tissue or other material suitable for cleaning optical
material such as eyeglasses.
Connector
1.
Remove the main battery from mobile computer. See Replacing the Battery on page 1-7.
2.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
Maintenance & Troubleshooting 11 - 5
3.
Rub the cotton portion of the cotton tipped applicator back-and-forth across the connector on the bottom of
the MC67. Do not leave any cotton residue on the connector.
4.
Repeat at least three times.
5.
Use the cotton tipped applicator dipped in alcohol to remove any grease and dirt near the connector area.
6.
Use a dry cotton tipped applicator and repeat steps 4 through 6.
7.
Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the
surface.
CAUTION
8.
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
Inspect the area for any grease or dirt, repeat if required.
Cleaning Cradle Connectors
To clean the connectors on a cradle:
1.
Remove the DC power cable from the cradle.
2.
Dip the cotton portion of the cotton tipped applicator in isopropyl alcohol.
3.
Rub the cotton portion of the cotton tipped applicator along the pins of the connector. Slowly move the
applicator back-and-forth from one side of the connector to the other. Do not let any cotton residue on the
connector.
4.
All sides of the connector should also be rubbed with the cotton tipped applicator.
5.
Spray compressed air in the connector area by pointing the tube/nozzle about ½ inch away from the
surface.
CAUTION
Do not point nozzle at yourself and others, ensure the nozzle or tube is away from your face.
6.
Ensure that there is no lint left by the cotton tipped applicator, remove lint if found.
7.
If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove.
8.
Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry
before applying power to cradle.
If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry
humidity requires less drying time.
Cleaning Frequency
The cleaning frequency is up to the customer’s discretion due to the varied environments in which the mobile
devices are used. They may be cleaned as frequently as required. However when used in dirty environments it
may be advisable to periodically clean the scanner exit window to ensure optimum scanning performance.
11 - 6 MC67 User Guide
Troubleshooting
MC67
Table 11-1 Troubleshooting the MC67
Problem
When pressing the
power button the
MC67 does not turn
on.
Cause
Solution
Battery not charged. Charge or replace the battery in the MC67.
Battery not installed
properly.
Install the battery properly. See Installing the Battery on page
1-4.
System crash.
Perform a reset. See Resetting the MC67 on page 2-12.
When pressing the
power button the
MC67 does not turn on
but two LEDs blink.
Battery charge is at
a level where data
is maintained but
battery should be
re-charged.
Charge or replace the battery in the MC67.
Battery did not charge.
Battery failed.
Replace battery. If the MC67 still does not operate, perform a
reset. See Resetting the MC67 on page 2-12.
MC67 removed
from cradle while
battery was
charging.
Insert MC67 in cradle. The 3600 mAh battery fully charges in
less than six hours.
Extreme battery
temperature.
Battery does not charge if ambient temperature is below 0°C
(32°F) or above 40°C (104°F).
Cannot see characters
on display.
MC67 not powered
on.
Press the Power button.
During data
communication, no
data transmitted, or
transmitted data was
incomplete.
MC67 removed
from cradle or
disconnected from
host computer
during
communication.
Replace the MC67 in the cradle, or reattach the communication
cable and re-transmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software was
incorrectly installed
or configured.
Perform setup. Refer to the MC67 Integrator Guide for details.
Volume setting is
low or turned off.
Adjust the volume. See Adjusting Volume on page 2-12.
No sound.
Maintenance & Troubleshooting 11 - 7
Table 11-1 Troubleshooting the MC67 (Continued)
Problem
MC67 shuts off.
Cause
MC67 is inactive.
Solution
The MC67 turns off after a period of inactivity. If the MC67 is
running on battery power, set this period from 1 to 5 minutes, in
one-minute intervals.
Tap
> Settings > System > Power > Advanced to
configure.
Tapping the window
buttons or icons does
not activate the
corresponding feature.
A message appears
stating that the MC67
memory is full.
Battery is depleted.
Replace the battery.
Battery is not
inserted properly.
Insert the battery properly. See Installing the Battery on page
1-4.
Screen is not
calibrated correctly.
Re-calibrate the screen. See Calibrating the Screen on page
1-7.
The device is not
responding.
Reset the device. See Resetting the MC67 on page 2-12.
Too many files
Delete unused memos and records. If necessary, save these
stored on the MC67. records on the host computer (or use an SD card for additional
memory).
Too many
applications
installed on the
MC67.
Remove user-installed applications on the MC67 to recover
memory. Tap
> Settings > System tab and tap the
Remove Programs icon. Select the unused program and tap
Remove.
11 - 8 MC67 User Guide
Table 11-1 Troubleshooting the MC67 (Continued)
Problem
The MC67 does not
decode with reading
bar code.
Cause
Solution
Scanning
application is not
loaded.
Load a scanning application on the MC67 or enable
DataWedge. See DataWedge on page 3-4 or the system
administrator.
Unreadable bar
code.
Ensure the symbol is not defaced.
Distance between
exit window and bar
code is incorrect.
Place the MC67 within proper scanning range.
MC67 is not
programmed for the
bar code.
Program the MC67 to accept the type of bar code being
scanned. Refer to the EMDK or DataWedge application.
MC67 is not
programmed to
generate a beep.
If the MC67 does not beep on a good decode, set the
application to generate a beep on good decode.
Battery is low.
If the scanner stops emitting a laser beam upon a trigger press,
check the battery level. When the battery is low, the scanner
shuts off before the MC67 low battery condition notification.
Note: If the scanner is still not reading symbols, contact the
distributor or Motorola.
User is trying to
decode a DPM bar
code.
An MC67 with a DPM imager is required. Contact system
administrator.
Error message “SIM
Feature not
Error. Cannot save
supported on some
information to the SIM” SIM cards.
appears when copying
contacts to a SIM card.
If error appears while copying one contact, reboot the MC67.
The contact appears on the SIM card after rebooting.
If error appears while copying multiple contacts, copy one
contact at a time and follow above solution.
Use Microsoft Outlook Exchange and ActiveSync to
synchronize contacts with Microsoft Outlook on host computer.
MC67 cannot find any
Bluetooth devices
nearby.
Cannot unlock MC67.
Too far from other
Bluetooth devices.
Move closer to the other Bluetooth device(s), within a range of
10 meters (32.8 feet).
The Bluetooth
device(s) nearby
are not turned on.
Turn on the Bluetooth device(s) to find.
The Bluetooth
device(s) are not in
discoverable mode.
Set the Bluetooth device(s) to discoverable mode. If needed,
refer to the device’s user documentation for help.
User enters
incorrect password.
If the user enters an incorrect password eight times, the user is
requested to enter a code before trying again.
If the user forgot the password, contact system administrator.
Maintenance & Troubleshooting 11 - 9
Single Slot USB Cradle
Table 11-2 Troubleshooting the Single Slot USB Cradle
Symptom
LEDs do not light
when MC67 or spare
battery is inserted.
MC67 battery is not
charging.
Spare battery is not
charging.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Possible Cause
Action
Cradle is not
receiving power.
Ensure the power cable is connected securely to both the
cradle and to AC power.
MC67 is not seated
firmly in the cradle.
Remove and re-insert the MC67 into the cradle, ensuring it is
firmly seated.
Spare battery is not
seated firmly in the
cradle.
Remove and re-insert the spare battery into the charging slot,
ensuring it is firmly seated.
MC67 was removed
from cradle or
cradle was
unplugged from AC
power too soon.
Ensure cradle is receiving power. Ensure MC67 is seated
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
The MC67 is not
fully seated in the
cradle.
Remove and re-insert the MC67 into the cradle, ensuring it is
firmly seated.
Extreme battery
temperature.
Battery does not charge if ambient temperature is below 0°C
(32°F) or above 40°C (104°F).
Battery not fully
seated in charging
slot.
Remove and re-insert the spare battery in the cradle, ensuring
it is firmly seated.
Battery inserted
incorrectly.
Re-insert the battery so the charging contacts on the battery
align with the contacts on the cradle.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
MC67 removed
from cradle during
communications.
Replace MC67 in cradle and retransmit.
Communication
software is not
installed or
configured properly.
Perform setup as described in the MC67 Integrator Guide.
correctly. Confirm the main battery is charging. Tap
>
Settings > Power > Battery tab. The 3600 mAh battery fully
charges in less than six hours.
11 - 10 MC67 User Guide
Four Slot Ethernet Cradle
Table 11-3 Troubleshooting the Four Slot Ethernet Cradle
Symptom
Cause
Solution
During
communication, no
data transmits, or
transmitted data was
incomplete.
MC67 removed
from cradle during
communications.
Replace MC67 in cradle and retransmit.
MC67 has no active
connection.
An icon is visible in the status bar if a connection is currently
active.
Battery is not
charging.
MC67 removed
from the cradle too
soon.
Replace the MC67 in the cradle. The 3600 mAh battery fully
charges in less than six hours.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
MC67 is not
inserted correctly in
the cradle.
Remove the MC67 and reinsert it correctly.
Ambient
temperature of the
cradle is too warm.
Move the cradle to an area where the ambient temperature is
between 0°C (32°F) and 50°C (122°F).
Vehicle Cradle
Table 11-4 Troubleshooting the Vehicle Cradle
Symptom
Possible Cause
Action
MC67 battery charging
LED does not light up.
Cradle is not
receiving power.
Ensure the power input cable is securely connected to the
cradle’s power port.
MC67 battery is not
recharging.
MC67 was removed
from the cradle too
soon.
Replace the MC67 in the cradle. The 3600 mAh battery fully
charges in less than six hours.
Battery is faulty.
Replace the battery.
MC67 is not placed
correctly in the
cradle.
Remove the MC67 from the cradle, and re-insert correctly. If
the battery still does not charge, contact customer support.
The MC67 battery charging LED slowly blinks amber when the
MC67 is correctly inserted and charging.
Ambient
temperature of the
cradle is too warm.
Move to an area where the ambient temperature is between
-20oC and 50oC 50°C (-4°F and 122°F).
Maintenance & Troubleshooting 11 - 11
Four Slot Battery Charger
r
Table 11-5 Troubleshooting The Four Slot Battery Charger
Symptom
Battery not charging.
Possible Cause
Action
Battery was
removed from the
charger or charger
was unplugged from
AC power too soon.
Re-insert the battery in the charger or re-connect the charger’s
power supply. The 3600 mAh battery fully charges in less than
six hours.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
Battery contacts not
connected to
charger.
Verify that the battery is seated in the battery well correctly with
the contacts facing down.
Cables
Table 11-6 Troubleshooting the Cables
Symptom
MC67 battery is not
charging.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Possible Cause
Action
MC67 was
disconnected from
AC power too soon.
Connect the power cable correctly. Confirm main battery is
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
The MC67 is not
fully attached to
power.
Detach and re-attach the power cable to the MC67, ensuring it
is firmly connected.
Cable was
disconnected from
MC67 during
communications.
Re-attach the cable and retransmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software is not
installed or
configured properly.
Perform setup as described in the MC67 Integrator Guide.
charging. Tap
> Power > Settings > Battery tab. The 3600
mAh battery fully charges in less than six hours.
11 - 12 MC67 User Guide
Magnetic Stripe Reader
Table 11-7 Troubleshooting the Magnetic Stripe Reader
Symptom
MSR cannot read
card.
MC67 battery is not
charging.
During data
communication, no
data transmits, or
transmitted data was
incomplete.
Possible Cause
Action
MSR removed from
MC67 during card
swipe.
Reattach MSR to MC67 and reswipe the card.
Faulty magnetic
stripe on card.
Try another card. If condition still exist, contact the system
administrator.
Swipe speed is too
fast or too slow.
Re-swipe card using a constant swipe speed.
MSR application is
not installed or
configured properly.
Ensure the MSR application is installed on the MC67.
Ensure the MSR application is configured correctly.
MC67 was removed
from MSR or MSR
was unplugged from
AC power too soon.
Ensure MSR is receiving power. Ensure MC67 is attached
correctly. Confirm main battery is charging. Tap
> Settings
> System > Power > Battery tab. The 3600 mAh battery fully
charges in less than six hours.
Battery is faulty.
Verify that other batteries charge properly. If so, replace the
faulty battery.
The MC67 is not
fully attached to the
MSR.
Detach and re-attach the MSR to the MC67, ensuring it is firmly
connected.
MC67 detached
from MSR during
communications.
Reattach MC67 to MSR and retransmit.
Incorrect cable
configuration.
See the system administrator.
Communication
software is not
installed or
configured properly.
Perform setup as described in the MC67 Integrator Guide.
APPENDIX A
TECHNICAL
SPECIFICATIONS
This appendix provides specifications for the MC67 and accessories.
MC67
Table A-1 MC67 Technical Specifications
Item
Description
Physical Characteristics
Dimensions
Height: 16.2 cm (6.38 in.)
Width: 7.7 cm (3.03 in.)
Depth: 3.35 cm (1.32 in.)
Weight
385 g (13.5 oz.)
Display
Color 3.5” video graphics adapter (VGA) with backlight, 65K colors, 480 W
x 640 L 650+ NITS.
Touch Panel
Glass analog resistive touch
Backlight
Light Emitting Diode (LED) backlight
Battery Pack
Rechargeable Lithium Ion 3.7V, 3600 mAh battery
Backup battery
Nickel–metal hydride (Ni-MH) battery (rechargeable) 15 mAh 2.8V
(non-user accessible or replaceable)
Expansion Slot
micro Secure Digital (SD) slot (supports up to 32 GB).
Connection Interface
Universal Serial Bus (USB) 2.0 High Speed (host and client)
Notification
Audible tone plus multi-color LEDs
Keypad Options
MC67NA: numeric, QWERTY, AZERTY, QWERTZ, Direct Store Delivery
(DSD) or Personal Information Manager (PIM)
MC67ND: numeric, QWERTY, AZERTY, QWERTZ or DSD
A-2
MC67 User Guide
Table A-1 MC67 Technical Specifications (Continued)
Item
Audio
Description
Dual microphone support with noise cancellation; vibrate alert; speaker;
Bluetooth headset
Performance Characteristics
CPU
Dual-core OMAP 4, 1 GHz
Operating System
Microsoft® Windows Embedded Handheld 6.5.3 Professional
Memory
512 MB Random Access Memory (RAM)/2 GB Flash
Output Power
USB - 5 VDC @ 300 mA max.
User Environment
Operating Temperature
-20°C to 50°C (-4°F to 122°F)
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Charging Temperature
0° C to 40° C (32°F to 104°F)
Humidity
5 to 95% non-condensing
Drop Specification
Multiple 2.4 m (8 ft.) drops per MIL-STD 810G at room temperature. 1.8 m
(6 ft.) across operating temperature per MIL-STD 810G.
Tumble
1,000 1.6 ft./0.5 meter tumbles at room temperature; per applicable IEC
tumble specifications
Electrostatic Discharge (ESD)
+/-15kVdc air discharge, +/-8kVdc direct discharge, +/-8kVdc indirect
discharge
Sealing
IP67 per IEC specification.
Vibration
4 g’s PK Sine (5 Hz to 2 kHz); 0.04g2/Hz Random (20 Hz to 2 kHz); 60
minute duration per axis, 3 axis
Thermal Shock
-40° C to 70° C (-40° F to 158° F) rapid transition
Motorola Interactive Sensor Technology (IST)
Motion Sensor
3-axis accelerometer provides motion-sensing for dynamic screen
orientation and power management.
Light Sensor
Ambient light sensor to auto adjust display backlight brightness.
Digital Compass
Navigation aid for users.
Wireless WAN Data and Voice Communications
Radio
4G HSPA+
Technical Specifications
A-3
Table A-1 MC67 Technical Specifications (Continued)
Item
Frequency Band
Description
MC67NA:
UMTS/HSDPA and HSUPA: 850, 900, 1900 and 2100 MHz
GSM/EDGE: 850, 900, 1800 and 1900 MHz
MC67ND:
UMTS/HSDPA and HSUPA: 850, 900, 1900 and 2100 MHz
GSM/EDGE: 850, 900, 1800 and 1900 MHz
CDMA/EvDO Rev A: (800 and 1900 MHz)
Wireless LAN Data and Voice Communications
Radio
IEEE® 802.11a/b/g/n
Data Rates Supported
1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
Operating Channels
Chan 36 - 165 (5180 - 5825 MHz)
Chan 1 - 13 (2412 - 2472 MHz)
Chan 14 (2484 MHz) Japan only
Actual operating channels/frequencies depend on regulatory rules and
certification agency
Security
WPA2 (Personal or Enterprise); 802.1x; EAP-TLS; TTLS (CHAP,
MS-CHAP, MS-CHAPv2, PAP or MD5); PEAP (TLS, MSCHAPv2,
EAP-GTC); LEAP, EAP-FAST (TLS, MS-CHAPv2, EAP-GTC)
Voice Communications
Voice-over-IP ready, Wi-Fi™-certified, IEEE 802.11a/b/g/n direct sequence
wireless LAN, Wi-Fi Multimedia™ (WMM and WMM-PS) Motorola Voice
Quality Manager (VQM)
Wireless PAN Data and Voice Communications
Bluetooth
Class II, v2.1 with Enhanced Data Rate (EDR)
Global Positioning System
GPS
Integrated stand-alone or Assisted-GPS (A-GPS).
Data Capture Specifications
Options
2D SE4500-SR imager
2D SE4500-SR imager and 8 MP camera
2D SE4500-DL imager
2D SE4500-DL imager and 8 MP camera
2D SE4500-DPM imager and 8 MP camera
Data Types
1D and 2D bar codes, DPM, photographs, video, signatures and
documents.
Voice and Audio
VoWWAN; VoWLAN; PPT, VoIP-ready; high-quality speakerphone; wireless (Bluetooth) headset support; PPT
headset support; headset/speakerphone modes
A-4
MC67 User Guide
Table A-1 MC67 Technical Specifications (Continued)
Item
Description
2D Imager Engine (SE4500-SR) Specifications
Field of View
Horizontal - 39.6°
Vertical - 25.7°
Optical Resolution
WVGA 752 H x 480 V pixels (gray scale)
Roll
360°
Pitch Angle
+/- 60° from normal
Skew Tolerance
+/- 60° from normal
Ambient Light
Indoor: 450 ft. candles (4845 lux)
Outdoor: 9000 ft. candles (96,900 lux)
Sunlight: 8000 ft. candles
Fluorescent: 450 ft. candles
Focal Distance
From center of exit window: 19 cm (7.5 in.)
Aiming Element (VLD)
655 nm +/- 10 nm
Illumination Element (LED)
625 nm +/- 5 nm
2D Imager Engine (SE4500-DL) Specifications
Field of View
Horizontal - 39.2°
Vertical - 25.4°
Optical Resolution
WVGA 752 H x 480 V pixels (gray scale)
Roll
360°
Pitch Angle
+/- 60° from normal
Skew Tolerance
+/- 60° from normal
Ambient Light
Indoor: 450 ft. candles (4845 lux)
Outdoor: 9000 ft. candles (96,900 lux)
Sunlight: 8000 ft. candles
Fluorescent: 450 ft. candles
Focal Distance
From center of exit window: 18.5 cm (7.3 in.)
Aiming Element (VLD)
655 nm +/- 10 nm
Illumination Element (LED)
625 nm +/- 5 nm
2D Imager Engine (SE4500-DPM) Specifications
Field of View
Horizontal - 39.2°
Vertical - 25.4°
Optical Resolution
WVGA 752 H x 480 V pixels (gray scale)
Roll
360°
Pitch Angle
+/- 60° from normal
Technical Specifications
A-5
Table A-1 MC67 Technical Specifications (Continued)
Item
Description
Skew Tolerance
+/- 60° from normal
Ambient Light
Indoor: 450 ft. candles (4845 lux)
Outdoor: 9000 ft. candles (96,900 lux)
Sunlight: 8000 ft. candles
Fluorescent: 450 ft. candles
Focal Distance
From center of exit window: 18.5 cm (7.3 in.)
Aiming Element (VLD)
655 nm +/- 10 nm
Illumination Element (LED)
625 nm +/- 5 nm
Camera Specifications
Resolution
8 Mega pixel
Table A-2 Data Capture Supported Symbologies
Item
Description
1D Bar Codes
Chinese 2 of 5
Code 128
Coupon Code
EAN-13
GS1 DataBar Expanded
GS1 DataBar Limited
Korean 2 of 5
TLC39
UPCA
UPC/EAN Supplementals
Codabar
Code 11
Code 39
Code 93
Discrete 2 of 5
EAN-8
GS1 DataBar
GS1 DataBar 14
GS1 DataBar Expanded Stacked
Interleaved 2 of 5
ISBT 128
Matrix 2 of 5
MSI
Trioptic 39
UCC/EAN 128
UPCE
UPCE1
Webcode
2D Bar Codes
Australian Postal
Composite AB
Dutch Postal
Maxi Code
PDF-417
UK Postal
Aztec
Composite C
Japanese Postal
Micro PDF-417
QR Code
US Postnet
Canadian Postal
Data Matrix
Linked Aztec
microQR
US Planet
USPS 4-state (US4CB)
A-6
MC67 User Guide
APPENDIX B KEYPADS
Introduction
The MC67 offers six types of keypad configurations: Numeric, QWERTY, QWERTZ, AZERTY, PIM and DSD.
Numeric Keypad Configuration
The numeric keypad contains application keys, scroll keys, and function keys. The keypad is color-coded to
indicate the alternate function key (blue) values. Note that an application can change keypad functions so the
MC67’s keypad may not function exactly as described. See Table B-1 for key and button descriptions and
Table B-2 on page B-4 for the keypad’s special functions.
Figure B-1 MC67 Numeric Keypad
B-2
MC67 User Guide
Table B-1 MC67 Numeric Keypad Descriptions
Key
Blue Key
Description
Use this key to launch applications or access items (shown on the keypad in blue).
Press the Blue key once to activate this mode, followed by another key.
A single press illuminates the key and displays the following icon at the bottom of the
screen, until a second key is pressed:
Orange Key
Use this key to access the secondary layer of characters and actions (shown on the
keypad in orange). Press the Orange key once to lock the keypad into Alpha state.
A single press illuminates the key and displays the following icon at the bottom of the
screen:
Press the Orange key a second time to return to the normal state.
Press the Orange key, then the Shift key to add a temporary shift (that applies only to
the next key pressed) to the orange lock state. This displays the following icon at the
bottom of the screen:
Talk/Start Menu
Talk (Green Phone): press to display the phone keypad window or to dial a phone
number (from the phone keypad window).
When on a phone call, press to place the call on hold.
Use this key in conjunction with the Blue key to instantly display the Start menu from any
application without tapping the screen. This function is user programmable.
Scan (yellow)
Activates the imager in a scan enabled application or takes a picture or records a video
in a camera application.
End/OK
End (Red Phone): press when the phone keypad window displays to stop dialing or end
a call.
Use this key in conjunction with the Blue key as an OK or close button. This function is
user programmable.
Scroll Up and Left
Moves up one item.
Moves left one item when pressed with the Orange key.
Scroll Down and
Right
Moves down one item.
Moves right one item when pressed with the Orange key.
Keypads
B-3
Table B-1 MC67 Numeric Keypad Descriptions (Continued)
Key
Description
Soft Keys
Accesses the command or menu above it on the screen.
Star
Produces an asterisk in default state.
Press and release the blue key, then press the Star key to open the Start menu.
Alphanumeric
In default state, produces the numeric value on the key.
In Alpha state, produces the lower case alphabetic characters on the key. Each key
press produces the next alphabetic character in sequence. For example, press and
release the Orange key and then press the ‘4’ key once to produce the letter ‘g’; press
and release the Orange key and then press the ‘4’ key three times to produce the letter
‘i’.
Press the SHIFT key in Alpha state to produce the upper case alphabetic characters on
the key. For example, press and release the Orange key, press and release the SHIFT
key, and then press the ‘4’ key once to produce the letter ‘G’; press and release the
Orange key, press and release the SHIFT key and then press the ‘4’ key three times to
produce the letter ‘I’.
Backspace
Produces a backspace.
SHIFT
Press and release the SHIFT key to activate the keypad alternate SHIFT functions.
A single press displays the following icon at the bottom of the screen, until a second key
is pressed:
Press the Orange key, then the Shift key to add a temporary shift (that applies only to
the next key pressed) to the orange lock state. This displays the following icon at the
bottom of the screen:
Enter
Executes a selected item or function.
B-4
MC67 User Guide
Table B-2 Numeric Keypad Input Modes
Orange Key
(Alpha Lowercase Mode)
Numeric Mode
Orange + Shift Keys
(Alpha Uppercase Mode)
Key
Blue+
Key
SHIFT
+ Key
1st
Press
2nd
Press
3rd
Press
4th
Press
1st
Press
2nd
Press
3rd
Press
4th
Press
*
*
*
*
*
1
1
F1
!
*
*
*
2
2
F2
@
a
b
c
A
B
C
3
3
F3
#
d
e
f
D
E
F
4
4
F4
$
g
h
i
G
H
I
5
5
F5
%
j
k
l
J
K
L
6
6
F6
^
m
n
o
M
N
O
7
7
F7
&
p
q
r
P
Q
R
8
8
F8
*
t
u
v
T
U
V
9
9
F9
(
w
x
y
W
X
Y
0
0
F10
)
.
>
Up
Up
Up
Highlight
Up
Left
Left
Down
Down
Down
Highlight
Down
Right
Right
Enter
Action
Action
Action
Action
Action
s
z
Note: An application can change the key functions. The keypad may not function exactly as
described.
S
Z
Keypads
B-5
Alpha-numeric Keypad Configurations
The three types of alpha-numeric keypads (QWERTY, AZERTY and QWERTZ) produce the 26-character
alphabet (A-Z, both lowercase and uppercase), numbers (0-9), and assorted characters. The keypad is
color-coded to indicate which modifier key to press to produce a particular character or action. The keypad
default is alphabetic, producing lowercase letters. See Table B-3 for key and button descriptions and Table B-4
on page B-8 for the keypad’s special functions. AZERTY keypad is used on configurations installed with the
French operating system. QWERTZ keypad is used on configurations installed with the German operating
system.
Figure B-2 QWERTY Keypad Configuration
Figure B-3 AZERTY Keypad Configuration
B-6
MC67 User Guide
Figure B-4 QWERTZ Keypad Configuration
Table B-3 Alpha-numeric Keypad Descriptions
Key
Blue Key
Action
Press the Blue key once to activate this mode temporarily, followed by another key.
This displays the following icon at the bottom of the screen, until a second key is
pressed:
Press the Blue key twice to lock this mode. This displays the following icon at the
bottom of the screen:
Press the Blue key a third time to unlock.
Orange Key
Accesses the secondary layer of characters and actions (shown on the keypad in
orange).
Press the Orange key once to activate this mode temporarily, followed by another
key. This displays the following icon at the bottom of the screen, until a second key is
pressed:
Press the Orange key twice to lock this mode. This displays the following icon at the
bottom of the screen:
Press the Orange key a third time to unlock.
Talk/Start Menu
Talk (Green Phone): press to display the phone keypad window or to dial a phone
number (from the phone keypad window).
When on a phone call, press to place the call on hold.
Use this key in conjunction with the Blue key to instantly display the Start menu from
any application without tapping the screen. This function is user programmable.
Scan (yellow)
Activates the imager in a scan enabled application or takes a picture or records a
video in a camera application.
Keypads
B-7
Table B-3 Alpha-numeric Keypad Descriptions (Continued)
Key
End/OK
ok
Action
End (Red Phone): press when the phone keypad window displays to stop dialing or
end a call.
Use this key in conjunction with the Blue key as an OK or close button. This function
is user programmable.
Scroll Up and Left
Moves up one item.
Moves left one item when pressed with the Orange key.
Scroll Down and Right
Moves down one item.
Moves right one item when pressed with the Orange key.
Soft Keys
Accesses the command or menu above it on the screen.
Shift
Changes the state of the alpha characters from lowercase to uppercase.
•
Press the Shift key to activate this mode temporarily, followed by another
key. This displays the following icon at the bottom of the screen, until a
second key is pressed:
•
Press the Shift key twice to lock this mode. This displays the following icon at
the bottom of the screen:
Press the Shift key a third time to unlock.
Backlight
Turns the display backlight on and off.
Backspace
Produces a backspace.
Enter
Executes a selected item or function.
B-8
MC67 User Guide
Table B-3 Alpha-numeric Keypad Descriptions (Continued)
Key
Action
Period
Produces an period.
au
Creates special characters.
Table B-4 QWERTY Keypad Input Modes
Key
Normal
Shift + Key
Orange + Key
Blue + Key
Q
q
Q
*
q
W
w
W
1
w
E
e
E
2
e
R
r
R
3
r
T
t
T
+
t
Y
y
Y
_
y
U
u
U
-
u
I
i
I
=
i
O
o
O
“
o
P
p
P
áü
p
A
a
A
#
a
S
s
S
4
s
D
d
D
5
d
F
f
F
6
f
G
g
G
(
g
H
h
H
)
h
J
j
J
/
j
K
k
K
:
k
L
l
L
‘
l
Backspace
Backspace
Backspace
Backspace
Backspace
Shift
Shift
Shift-Lock
Shift
Shift
Note: An application can change the key functions. The keypad may not function exactly as
described.
Keypads
B-9
Table B-4 QWERTY Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
Z
z
Z
7
z
X
x
X
8
x
C
c
C
9
c
V
v
V
%
v
B
b
B
&
b
N
n
N
!
n
M
m
M
?
m
,
,
<
@
,
ENTER
Enter
Enter
Enter
Enter
0
0
)
0
0
TAB
Tab
Tab
Back tab
Tab
SPACE
Space
Space
Space
Space
Backlight
Backlight
Backlight
Backlight
Backlight
. (Period)
.
>
.
.
Note: An application can change the key functions. The keypad may not function exactly as
described.
Table B-5 AZERTY Keypad Input Modes
Key
Normal
Shift + Key
Orange + Key
Blue + Key
A
a
A
*
a
Z
z
Z
1
z
E
e
E
2
e
R
r
R
3
r
T
t
T
+
t
Y
y
Y
_
y
U
u
U
-
u
I
i
I
=
i
O
o
O
“
o
P
p
P
áü
p
Q
q
Q
#
q
Note: An application can change the key functions. The keypad may not function exactly as
described.
B - 10 MC67 User Guide
Table B-5 AZERTY Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
S
s
S
4
s
D
d
D
5
d
F
f
F
6
f
G
g
G
(
g
H
h
H
)
h
J
j
J
/
j
K
k
K
:
k
L
l
L
‘
l
Backspace
Backspace
Backspace
Backspace
Backspace
Shift
Shift
Shift-Lock
Shift
Shift
W
w
W
7
w
X
x
X
8
x
C
c
C
9
c
V
v
V
%
v
B
b
B
&
b
N
n
N
!
n
M
m
M
?
m
,
,
<
@
Enter
Enter
Enter
Enter
Enter
0
0
)
0
0
TAB
Tab
Tab
Back tab
Tab
SPACE
Space
Space
Space
Space
Backlight
Backlight
Backlight
Backlight
Backlight
. (Period)
.
>
.
.
Note: An application can change the key functions. The keypad may not function exactly as
described.
Keypads B - 11
Table B-6 QWERTZ Keypad Input Modes
Key
Normal
Shift + Key
Orange + Key
Blue + Key
Q
q
Q
*
q
W
w
W
1
w
E
e
E
2
e
R
r
R
3
r
T
t
T
+
t
Z
z
Z
_
z
U
u
U
-
u
I
i
I
=
i
O
o
O
“
o
P
p
P
áü
p
A
a
A
#
a
S
s
S
4
s
D
d
D
5
d
F
f
F
6
f
G
g
G
(
g
H
h
H
)
h
J
j
J
/
j
K
k
K
:
k
L
l
L
‘
l
Backspace
Backspace
Shift
Shift
Y
y
Y
7
y
X
x
X
8
x
C
c
C
9
c
V
v
V
%
v
B
b
B
&
b
N
n
N
!
n
M
m
M
?
m
,
,
<
@
,
Note: An application can change the key functions. The keypad may not function exactly as
described.
B - 12 MC67 User Guide
Table B-6 QWERTZ Keypad Input Modes (Continued)
Key
Normal
Shift + Key
Orange + Key
Blue + Key
ENTER
Enter
ENTER
ENTER
Enter
0
0
)
0
0
TAB
Tab
Tab
Back tab
Tab
SPACE
Space
Space
Space
Space
Backlight
Backlight
Backlight
Backlight
Backlight
. (Period)
.
>
.
.
Note: An application can change the key functions. The keypad may not function exactly as
described.
Keypads B - 13
PIM Keypad Configuration
The PIM keypad contains application keys and scroll keys. Note that an application can change keypad
functions so the MC67’s keypad may not function exactly as described. See Table B-7 for key and button
descriptions.
Figure B-5 PIM Keypad
Table B-7 PIM Keypad Descriptions
Key
Description
Talk (Green Phone)
Talk (Green Phone): press to display the phone keypad window or to dial a phone
number (from the phone keypad window).
When on a phone call, press to place the call on hold.
Use this key in conjunction with the Blue key to instantly display the Start menu from any
application without tapping the screen. This function is user programmable.
End (Red Phone)
End (Red Phone): press when the phone keypad window displays to stop dialing or end
a call.
Use this key in conjunction with the Blue key as an OK or close button. This function is
user programmable.
Start
Use this key to instantly display the Start menu from any application without tapping the
screen. This function is user programmable.
Scan (yellow)
Activates the imager in a scan enabled application or takes a picture or records a video in
a camera application.
Scroll Up
Moves up one item.
B - 14 MC67 User Guide
Table B-7 PIM Keypad Descriptions (Continued)
Key
Description
Scroll Down
Moves up down item.
Scroll Left
Moves left one item.
Scroll Right
Moves right one item.
Soft Keys
Accesses the command or menu above it on the screen.
Enter
Executes a selected item or function.
OK
Use this key as an OK or close button.
Keypads B - 15
DSD Keypad Configuration
The Direct Store Delivery (DSD) keypad contains application keys, scroll keys, and function keys. The keypad
is color-coded to indicate the alternate function key (blue) values. Note that an application can change keypad
functions so the MC67’s keypad may not function exactly as described. See Table B-8 for key and button
descriptions and Table B-9 on page B-17 for the keypad’s special functions.
Figure B-6 MC67 DSD Keypad
Table B-8 MC67 DSD Keypad Descriptions
Key
Blue Key
Description
Use this key to launch applications or access items (shown on the keypad in blue).
Press the Blue key once to activate this mode, followed by another key.
A single press illuminates the key and displays the following icon at the bottom of the
screen, until a second key is pressed:
Orange Key
Use this key to access the secondary layer of characters and actions (shown on the
keypad in orange). Press the Orange key once to lock the keypad into Alpha state.
A single press illuminates the key and displays the following icon at the bottom of the
screen:
Press the Orange key a second time to return to the normal state.
Press the Orange key, then the Shift key to add a temporary shift (that applies only to
the next key pressed) to the orange lock state. This displays the following icon at the
bottom of the screen:
Talk/Start Menu
Talk (Green Phone): press to display the phone keypad window or to dial a phone
number (from the phone keypad window).
When on a phone call, press to place the call on hold.
Use this key in conjunction with the Blue key to instantly display the Start menu from any
application without tapping the screen. This function is user programmable.
B - 16 MC67 User Guide
Table B-8 MC67 DSD Keypad Descriptions (Continued)
Key
Description
Scan (yellow)
Activates the imager in a scan enabled application or takes a picture or records a video
in a camera application.
End/OK
End (Red Phone): press when the phone keypad window displays to stop dialing or end
a call.
Use this key in conjunction with the Blue key as an OK or close button. This function is
user programmable.
Scroll Up
Moves up one item.
Moves left one item when pressed with the Orange key.
Scroll Down
Moves down one item.
Scroll Left
Moves left one item.
Scroll Right
Moves right one item
SPACE
Produces a space character.
Alphanumeric
In default state, produces the numeric value on the key.
In Alpha state, produces the lower case alphabetic characters on the key. Each key
press produces the next alphabetic character in sequence. For example, press and
release the Orange key and then press the ‘4’ key once to produce the letter ‘g’; press
and release the Orange key and then press the ‘4’ key three times to produce the letter
‘i’.
Backspace
Produces a backspace.
Period
Produces a period character.
Keypads B - 17
Table B-8 MC67 DSD Keypad Descriptions (Continued)
Key
Description
Tab
Move from one field to the next.
ESC
Exit the current operation.
Dash
Produces a dash character.
Enter
Executes a selected item or function.
Table B-9 DSD Keypad Input Modes
Orange Key
(Alpha Lowercase Mode)
Numeric Mode
Key
Blue+
Key
SHIFT +
Key
2nd
Press
1st Press
3rd Press
4th Press
*
1
1
F1
!
*
*
*
2
2
F2
@
a
b
c
3
3
F3
#
d
e
f
4
4
F4
$
g
h
i
5
5
F5
%
j
k
l
6
6
F6
^
m
n
o
7
7
F7
&
p
q
r
8
8
F8
*
t
u
v
9
9
F9
(
w
x
y
0
0
F10
)
.
s
z
Note: An application can change the key functions. The keypad may not function exactly as
described.
B - 18 MC67 User Guide
Table B-9 DSD Keypad Input Modes (Continued)
Orange Key
(Alpha Lowercase Mode)
Numeric Mode
Key
Blue+
Key
SHIFT +
Key
1st Press
Up
Up
Up
Highlight
Up
Left
Down
Down
Down
Highlight
Down
Right
Enter
Action
Action
Action
Action
2nd
Press
3rd Press
4th Press
Note: An application can change the key functions. The keypad may not function exactly as
described.
Special Character Key
NOTE Special characters are only available on the alpha-numeric keypad configurations.
To add special characters using the MC67 áü key, type the related character first, then press the Orange twice
followed by the áü (P) key. Continue pressing the áü key until the special character displays. To modify an
existing character, move the cursor to the right of the character then press the Orange key twice and then
press the áü key until the special character replaces the original character. Table B-10 lists the special
characters the user can generate.
Table B-10 Special Characters
Key
Special Characters
Key
a
A
c
C
d
D
e
E
i
I
l
L
n
N
o
O
p
P
r
R
s
S
t
T
u
U
Special Characters
Keypads B - 19
Table B-10 Special Characters (Continued)
Key
Special Characters
Key
y
Y
z
Z
$
/
“
(
)
+
!
.
*
@
%
,
#
&
_
‘
?
:
-
Special Characters
B - 20 MC67 User Guide
GLOSSARY
A
API. (Application Programming Interface) An interface by means of which one software component communicates with
or controls another. Usually used to refer to services provided by one software component to another, usually via
software interrupts or function calls
AZERTY. A standard keyboard commonly used on French keyboards. “AZERTY” refers to the arrangement of keys on
the top row of keys.
AKU. (Adaptation Kit Update) Updates to the Windows Mobile operating system.
AFH. Adaptive Frequency Hopping
ActiveSync. ActiveSync is a data synchronization program developed by Microsoft for use with Windows Mobile
operating systems.
B
Bar Code. A pattern of variable-width bars and spaces which represents numeric or alphanumeric data in
machine-readable form. The general format of a bar code symbol consists of a leading margin, start character, data
or message character, check character (if any), stop character, and trailing margin. Within this framework, each
recognizable symbology uses its own unique format. See Symbology.
Bit. Binary digit. One bit is the basic unit of binary information. Generally, eight consecutive bits compose one byte of
data. The pattern of 0 and 1 values within the byte determines its meaning.
Bits per Second (bps). Bits transmitted or received.
Bluetooth. A wireless protocol utilizing short-range communications technology facilitating data transmission over short
distances.
boot or boot-up. The process a computer goes through when it starts. During boot-up, the computer can run
self-diagnostic tests and configure hardware and software.
Glossary - 2
MC67 User Guide
bps. See Bits Per Second.
Byte. On an addressable boundary, eight adjacent binary digits (0 and 1) combined in a pattern to represent a specific
character or numeric value. Bits are numbered from the right, 0 through 7, with bit 0 the low-order bit. One byte in
memory is used to store one ASCII character.
C
CDRH. Center for Devices and Radiological Health. A federal agency responsible for regulating laser product safety.
This agency specifies various laser operation classes based on power output during operation.
CDRH Class 1. This is the lowest power CDRH laser classification. This class is considered intrinsically safe, even if all
laser output were directed into the eye's pupil. There are no special operating procedures for this class.
CDRH Class 2. No additional software mechanisms are needed to conform to this limit. Laser operation in this class
poses no danger for unintentional direct human exposure.
Character. A pattern of bars and spaces which either directly represents data or indicates a control function, such as a
number, letter, punctuation mark, or communications control contained in a message.
Codabar. A discrete self-checking code with a character set consisting of digits 0 to 9 and six additional characters: (“-”,
“$”, “:”, “/”, “,” and “+”).
Code 128. A high density symbology which allows the controller to encode all 128 ASCII characters without adding extra
symbol elements.
Code 3 of 9 (Code 39). A versatile and widely used alphanumeric bar code symbology with a set of 43 character types,
including all uppercase letters, numerals from 0 to 9 and 7 special characters (“-”, “.”, “/”, “+”, “%”, “$” and space).
The code name is derived from the fact that 3 of 9 elements representing a character are wide, while the remaining
6 are narrow.
Code 93. An industrial symbology compatible with Code 39 but offering a full character ASCII set and a higher coding
density than Code 39.
COM port. Communication port; ports are identified by number, e.g., COM1, COM2.
Cradle. A cradle is used for charging the terminal battery and for communicating with a host computer, and provides a
storage place for the terminal when not in use.
D
DCP. See Device Configuration Package.
Decode. To recognize a bar code symbology (e.g., UPC/EAN) and then analyze the content of the specific bar code
scanned.
Decode Algorithm. A decoding scheme that converts pulse widths into data representation of the letters or numbers
encoded within a bar code symbol.
Decryption. Decryption is the decoding and unscrambling of received encrypted data. Also see, Encryption and Key.
Glossary - 3
Depth of Field. The range between minimum and maximum distances at which a scanner can read a symbol with a
certain minimum element width.
Device Configuration Package. The Symbol Device Configuration Package provides the Product Reference Guide
(PRG), flash partitions, Terminal Configuration Manager (TCM) and the associated TCM scripts. With this package
hex images that represent flash partitions can be created and downloaded to the mobile computer.
Discrete 2 of 5. A binary bar code symbology representing each character by a group of five bars, two of which are
wide. The location of wide bars in the group determines which character is encoded; spaces are insignificant. Only
numeric characters (0 to 9) and START/STOP characters may be encoded.
E
EAN. European Article Number. This European/International version of the UPC provides its own coding format and
symbology standards. Element dimensions are specified metrically. EAN is used primarily in retail.
EMDK. Enterprise Mobility Developer’s Kit.
ESD. Electro-Static Discharge
F
File Transfer Protocol (FTP). A TCP/IP application protocol governing file transfer via network or telephone lines. See
TCP/IP.
Flash Memory. Flash memory is nonvolatile, semi-permanent storage that can be electronically erased in the circuit
and reprogrammed.
FHSS (Frequency Hopping Spread Sprectrum). A method of transmitting radio signals by rapidly switching a carrier
among many frequency channels, using a pseudorandom sequence known to both transmitter and receiver.
G
GPS (Global Positioning System). A satellite-based navigation system made up of a network of 24 satellites. GPS
satellites circle the earth and transmit signal information to earth. GPS receivers take this information and use
triangulation to calculate the user's exact location.
H
Hz. Hertz; A unit of frequency equal to one cycle per second.
Host Computer. A computer that serves other terminals in a network, providing such services as computation,
database access, supervisory programs and network control.
Glossary - 4
MC67 User Guide
I
IEC. International Electrotechnical Commission. This international agency regulates laser safety by specifying various
laser operation classes based on power output during operation.
IEC (825) Class 1. This is the lowest power IEC laser classification. Conformity is ensured through a software restriction
of 120 seconds of laser operation within any 1000 second window and an automatic laser shutdown if the scanner's
oscillating mirror fails.
IEEE Address. See MAC Address.
Input/Output Ports. I/O ports are primarily dedicated to passing information into or out of the terminal’s memory. MC67
mobile computers include USB ports.
Interleaved 2 of 5. A binary bar code symbology representing character pairs in groups of five bars and five
interleaved spaces. Interleaving provides for greater information density. The location of wide elements
(bar/spaces) within each group determines which characters are encoded. This continuous code type uses no
intercharacter spaces. Only numeric (0 to 9) and START / STOP characters may be encoded.
Internet Protocol Address. See IP.
I/O Ports. The connection between two devices, defined by common physical characteristics, signal characteristics, and
signal meanings. Types of interfaces include RS-232 and USB.
IP. Internet Protocol. The IP part of the TCP/IP communications protocol. IP implements the network layer (layer 3) of
the protocol, which contains a network address and is used to route a message to a different network or subnetwork.
IP accepts “packets” from the layer 4 transport protocol (TCP or UDP), adds its own header to it and delivers a
“datagram” to the layer 2 data link protocol. It may also break the packet into fragments to support the maximum
transmission unit (MTU) of the network.
IP Address. (Internet Protocol address) The address of a computer attached to an IP network. Every client and server
station must have a unique IP address. A 32-bit address used by a computer on a IP network. Client workstations
have either a permanent address or one that is dynamically assigned to them each session. IP addresses are written
as four sets of numbers separated by periods; for example, 204.171.64.2.
IPX/SPX. Internet Package Exchange/Sequential Packet Exchange. A communications protocol for Novell. IPX is
Novell’s Layer 3 protocol, similar to XNS and IP, and used in NetWare networks. SPX is Novell's version of the Xerox
SPP protocol.
ISM. Industry Scientific and Medical
K
Key. A key is the specific code used by the algorithm to encrypt or decrypt the data. Also see, Encryption and
Decrypting.
Glossary - 5
L
LASER. Light Amplification by Stimulated Emission of Radiation.The laser is an intense light source. Light from a laser
is all the same frequency, unlike the output of an incandescent bulb. Laser light is typically coherent and has a high
energy density.
laser scanner. A type of bar code reader that uses a beam of laser light.
LCD. See Liquid Crystal Display.
LED Indicator. A semiconductor diode (LED - Light Emitting Diode) used as an indicator, often in digital displays. The
semiconductor uses applied voltage to produce light of a certain frequency determined by the semiconductor's
particular chemical composition.
Light Emitting Diode. See LED.
Liquid Crystal Display (LCD). A display that uses liquid crystal sealed between two glass plates. The crystals are
excited by precise electrical charges, causing them to reflect light outside according to their bias. They use little
electricity and react relatively quickly. They require external light to reflect their information to the user.
M
MC. Mobile Computer.
MDN. Mobile Directory Number. The directory listing telephone number that is dialed (generally using POTS) to reach
a mobile unit. The MDN is usually associated with a MIN in a cellular telephone -- in the US and Canada, the MDN
and MIN are the same value for voice cellular users. International roaming considerations often result in the MDN
being different from the MIN.
MIN. Mobile Identification Number. The unique account number associated with a cellular device. It is broadcast by the
cellular device when accessing the cellular system.
Mobile Computer. In this text, mobile computer refers to the MC67. It can be set up to run as a stand-alone device, or
it can be set up to communicate with a network, using wireless radio technology.
N
Nominal. The exact (or ideal) intended value for a specified parameter. Tolerances are specified as positive and
negative deviations from this value.
NVM. Non-Volatile Memory.
O
Open System Authentication. Open System authentication is a null authentication algorithm.
Glossary - 6
MC67 User Guide
P
PAN . Personal Area Network. Using Bluetooth wireless technology, PANs enable devices to communicate wirelessly.
Generally, a wireless PAN consists of a dynamic group of less than 255 devices that communicate within about a
33-foot range. Only devices within this limited area typically participate in the network.
PING. (Packet Internet Groper) An Internet utility used to determine whether a particular IP address is online. It is used
to test and debug a network by sending out a packet and waiting for a response.
Q
QWERTY. A standard keyboard commonly used on European keyboards. “QWERTY” refers to the arrangement of keys
on the top row of keys.
QWERTZ. A standard keyboard commonly used on German keyboards. “QWERTZ” refers to the arrangement of keys
on the top row of keys.
R
RAM. Random Access Memory. Data in RAM can be accessed in random order, and quickly written and read.
RF. Radio Frequency.
ROM. Read-Only Memory. Data stored in ROM cannot be changed or removed.
Router. A device that connects networks and supports the required protocols for packet filtering. Routers are typically
used to extend the range of cabling and to organize the topology of a network into subnets. See Subnet.
S
Scanner. An electronic device used to scan bar code symbols and produce a digitized pattern that corresponds to the
bars and spaces of the symbol. Its three main components are: 1) Light source (laser or photoelectric cell) illuminates a bar code,; 2) Photodetector - registers the difference in reflected light (more light reflected from
spaces); 3) Signal conditioning circuit - transforms optical detector output into a digitized bar pattern.
SDK. Software Development Kit
Shared Key. Shared Key authentication is an algorithm where both the AP and the MU share an authentication key.
SID. System Identification code. An identifier issued by the FCC for each market. It is also broadcast by the cellular
carriers to allow cellular devices to distinguish between the home and roaming service.
Space. The lighter element of a bar code formed by the background between bars.
Specular Reflection. The mirror-like direct reflection of light from a surface, which can cause difficulty decoding a bar
code.
Glossary - 7
Start/Stop Character. A pattern of bars and spaces that provides the scanner with start and stop reading instructions
and scanning direction. The start and stop characters are normally to the left and right margins of a horizontal code.
Subnet. A subset of nodes on a network that are serviced by the same router. See Router.
Subnet Mask. A 32-bit number used to separate the network and host sections of an IP address. A custom subnet mask
subdivides an IP network into smaller subsections. The mask is a binary pattern that is matched up with the IP
address to turn part of the host ID address field into a field for subnets. Default is often 255.255.255.0.
Substrate. A foundation material on which a substance or image is placed.
Symbol. A scannable unit that encodes data within the conventions of a certain symbology, usually including start/stop
characters, quiet zones, data characters and check characters.
Symbol Aspect Ratio. The ratio of symbol height to symbol width.
Symbol Height. The distance between the outside edges of the quiet zones of the first row and the last row.
Symbol Length. Length of symbol measured from the beginning of the quiet zone (margin) adjacent to the start
character to the end of the quiet zone (margin) adjacent to a stop character.
Symbology. The structural rules and conventions for representing data within a particular bar code type (e.g. UPC/EAN,
Code 39, PDF417, etc.).
T
TCP/IP. (Transmission Control Protocol/Internet Protocol) A communications protocol used to internetwork dissimilar
systems. This standard is the protocol of the Internet and has become the global standard for communications. TCP
provides transport functions, which ensures that the total amount of bytes sent is received correctly at the other end.
UDP is an alternate transport that does not guarantee delivery. It is widely used for real-time voice and video
transmissions where erroneous packets are not retransmitted. IP provides the routing mechanism. TCP/IP is a
routable protocol, which means that all messages contain not only the address of the destination station, but the
address of a destination network. This allows TCP/IP messages to be sent to multiple networks within an
organization or around the world, hence its use in the worldwide Internet. Every client and server in a TCP/IP
network requires an IP address, which is either permanently assigned or dynamically assigned at startup.
Telnet. A terminal emulation protocol commonly used on the Internet and TCP/IP-based networks. It allows a user at a
terminal or computer to log onto a remote device and run a program.
Terminal. See Mobile Computer.
Terminal Emulation. A “terminal emulation” emulates a character-based mainframe session on a remote
non-mainframe terminal, including all display features, commands and function keys. The VC5000 Series supports
Terminal Emulations in 3270, 5250 and VT220.
TFTP. (Trivial File Transfer Protocol) A version of the TCP/IP FTP (File Transfer Protocol) protocol that has no directory
or password capability. It is the protocol used for upgrading firmware, downloading software and remote booting of
diskless devices.
Tolerance. Allowable deviation from the nominal bar or space width.
Transmission Control Protocol/Internet Protocol. See TCP/IP.
Glossary - 8
MC67 User Guide
Trivial File Transfer Protocol. See TFTP.
U
UDP. User Datagram Protocol. A protocol within the IP protocol suite that is used in place of TCP when a reliable
delivery is not required. For example, UDP is used for real-time audio and video traffic where lost packets are simply
ignored, because there is no time to retransmit. If UDP is used and a reliable delivery is required, packet sequence
checking and error notification must be written into the applications.
UPC. Universal Product Code. A relatively complex numeric symbology. Each character consists of two bars and two
spaces, each of which is any of four widths. The standard symbology for retail food packages in the United States.
V
Visible Laser Diode (VLD). A solid state device which produces visible laser light.
INDEX
Numerics
2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
key descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . B-6
answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
auto charge cable . . . . . . . . . . . . . . . . . . . . 10-2, 10-13
AZERTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
A
accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
auto charge cable . . . . . . . . . . . . . . . . . . . . . . . 10-2
cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
charge only cable . . . . . . . . . . . . . . . . . . . . . . . 10-2
communication/charge cables
battery charging . . . . . . . . . . . . . . . . . . . . 10-13
LED indicators . . . . . . . . . . . . . . . . . . . . . 10-14
fabric holster . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
four slot charge only cradle . . . . . . . . . . . 10-1, 10-7
four slot Ethernet cradle . . . . . . . . . . . . . . 10-1, 10-8
four slot spare battery charger . . . . . . . . 10-1, 10-12
holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
MMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 10-3
screen protector . . . . . . . . . . . . . . . . . . . . . . . . 10-2
SD card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
single slot USB cradle . . . . . . . . . . . . . . . . . . . 10-3
spare battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
spring loaded stylus . . . . . . . . . . . . . . . . . . . . . 10-2
stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
USB charging cable . . . . . . . . . . . . . . . . . . . . . 10-2
USB cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
vehicle cradle . . . . . . . . . . . . . . . . . . . . . 10-1, 10-10
vehicle holder . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
wall mounting kit, cradle . . . . . . . . . . . . . . . . . . 10-2
ActiveSync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
adaptive frequency hopping . . . . . . . . . . . . . . . . . . . 7-1
adjusting volume . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
AFH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
Alpha-numeric keypad . . . . . . . . . . . . . . . . . . . . . . . B-5
alpha-numeric keypad
B
bar codes
two dimensional . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
battery
charging . . . . . . . 1-5, 10-3, 10-7, 10-8, 10-10, 10-12
check status . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
removing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
battery chargers
communication/charge cables . . . . . . . . . . . . . 10-13
LED indicators . . . . . . . . . . . . . . . . . . . . . . 10-14
four slot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
battery charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5
communication/charge cables . . . . . . . . . . . . . 10-13
using four slot charge only cradle . . . . . . . . . . . 10-7
using four slot Ethernet cradle . . . . . . . . . . . . . . 10-8
using four slot spare battery charger . . . . . . . . 10-12
using single slot USB cradle . . . . . . . . . . . . . . . 10-3
using vehicle cradle . . . . . . . . . . . . . . . . . . . . . 10-10
battery icon . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, 2-14
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1
adaptive frequency hopping . . . . . . . . . . . . . . . . 7-1
bonding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30
deleting bonded device . . . . . . . . . . . . . . . . . . . 7-31
security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
turning off . . . . . . . . . . . . . . . . . . . . . . . . . 7-6, 7-14
turning on . . . . . . . . . . . . . . . . . . . . . . . . . 7-6, 7-14
bluetooth
communicating icon . . . . . . . . . . . . . . . . . . . . . . . 2-7
disabled icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
discovering devices . . . . . . . . . . . . . . . . . . 7-7, 7-15
Index - 2
MC65 User Guide
enabled icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
turning on and off . . . . . . . . . . . . . . . . . . . .7-6, 7-14
bonding
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30
boot
cold . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12, 7-5
warm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12, 7-5
bullets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
buttons
power . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12, 2-18
C
cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
auto charge cable . . . . . . . . . . . . . . . . . . . . . . . 10-2
connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
calibrating the screen . . . . . . . . . . . . . . . . . . . . . . . . 1-6
call history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-6, 4-7
charge only cable . . . . . . . . . . . . . . . . . . . . .10-2, 10-13
charge only cradle . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
charging
spare batteries . . . . . . . . . . . . . . . . 1-6, 10-4, 10-12
using four slot charge only cradle . . . . . . . . . . . 10-7
using four slot Ethernet cradle . . . . . . . . . . . . . 10-8
using four slot spare battery charger . . . . . . . 10-12
using single slot USB cradle . . . . . . . . . . . . . . . 10-3
using vehicle cradle . . . . . . . . . . . . . . . . . . . . 10-10
charging indicators . . . . . . . . . . . . . . . . . . . . .2-2, 10-14
four slot charge only cradle . . . . . . . . . . . . . . . . 10-7
four slot spare battery charger . . . . . . . . . . . . 10-12
single slot USB cradle . . . . . . . . . . . . . . . . . . . . 10-4
vehicle cradle . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
charging temperature . . . . . . . . . . . . . . . . . . . .1-6, 10-4
cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
clock & alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
cold boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12, 7-5
command bar
icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7, 2-9
communication . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
communication/charge cables . . . . . . . . . . . . . . . . 10-13
battery charging . . . . . . . . . . . . . . . . . . . . . . . 10-13
LED indicators . . . . . . . . . . . . . . . . . . . . . . . . . 10-14
conference call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
contacts application . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
conventions
notational . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xv
cradles
four slot charge only . . . . . . . . . . . . . . . . .10-1, 10-7
four slot charge only cradle . . . . . . . . . . . . . . . . 10-7
four slot Ethernet . . . . . . . . . . . . . . . . . . . 10-1, 10-8
four slot spare battery charger . . . . . . . . . . . . . 10-12
single slot USB . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
D
data capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
digital camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
dot aiming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
imager operational modes
decode mode . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
image capture mode . . . . . . . . . . . . . . . . . . . 3-2
pick list mode . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
scan angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
scan range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3, 3-4
two dimensional bar codes . . . . . . . . . . . . . . . . . 3-1
deleting Bluetooth bond . . . . . . . . . . . . . . . . . . . . . . 7-31
display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
dual line SIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5
E
emergency calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
ESD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Ethernet cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
F
fabric holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
file explorer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
four slot charge only cradle . . . . . . . . . . . . . . . . . . . 10-7
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-7
charging indicators . . . . . . . . . . . . . . . . . . . . . . . 10-7
four slot Ethernet cradle . . . . . . . . . . . . . . . . . 10-1, 10-8
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
four slot spare battery charger . . . . . . . . . . . 10-1, 10-12
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
charging indicators . . . . . . . . . . . . . . . . . . . . . . 10-12
setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
H
hard reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12, 7-5
headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
hexadecimal keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
High-Speed Downlink Packet Access . . . . . . . . . . . . 4-1
holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
I
icons
Index - 3
battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, 2-14
bluetooth communicating . . . . . . . . . . . . . . . . . . 2-7
bluetooth disabled . . . . . . . . . . . . . . . . . . . . . . . 2-7
bluetooth enabled . . . . . . . . . . . . . . . . . . . . . . . . 2-7
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
task tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7, 2-9
wireless applications . . . . . . . . . . . . . . . . . . . . . . 2-7
wireless status . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
imager. See data capture, imaging
imager. See data capture, imaging, imagersample
imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1, 3-2
information, service . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi
installing battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Internet Explorer Mobile . . . . . . . . . . . . . . . . . . . . . 2-10
internet sharing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
IrDA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
K
muting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
N
navigation bar
icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . xv
notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
notes application . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
numeric keypad . . . . . . . . . . . . . . . . . . . B-1, B-13, B-15
input modes . . . . . . . . . . . . . . . . . . . . . . . . B-4, B-17
key descriptions . . . . . . . . . . . . . . . . B-2, B-13, B-15
O
operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii
P
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
battery status . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
charging . . . . . 2-3, 10-4, 10-7, 10-11, 10-12, 10-14
radio status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
scan and decode . . . . . . . . . . . . . . . . . 2-2, 3-3, 3-4
lithium-ion battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
locking the MC67 keypad . . . . . . . . . . . . . . . . . . . . . 9-4
pass-phrase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
phone
answering a call . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
call history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
call swapping . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
conference call . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
muting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
speed dial
adding entry . . . . . . . . . . . . . . . . . . . . . . . . 4-11
calling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
deleting entry . . . . . . . . . . . . . . . . . . . . . . . 4-14
editing entry . . . . . . . . . . . . . . . . . . . . . . . . 4-13
taking notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
text messaging . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
three-way call . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
using keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
editing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7
power button . . . . . . . . . . . . . . . . . . . . . . . . . 2-12, 2-18
M
Q
main battery
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-5
installing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
masked characters . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Media Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
MMC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 10-3
MSP Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
multi media card . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 10-3
QWERTY keypad
input modes . . . . . . . . . . . . . . . . . . . . B-8, B-9, B-11
QWERTZ keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
key descriptions
alpha-numeric keypad . . . . . . . . . . . . . . . . . . . . B-6
numeric keypad . . . . . . . . . . . . . . . .B-2, B-13, B-15
keypads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
input modes . . . . . . . . . . . B-4, B-8, B-9, B-11, B-17
key descriptions . . . . . . . . . . . . B-2, B-6, B-13, B-15
numeric . . . . . . . . . . . . . . . . . . . . . . .B-1, B-13, B-15
QWERTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-5
special character key . . . . . . . . . . . . . . . . . . . . B-18
types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
L
R
radios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .xiii
rapid deployment . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
removing main battery . . . . . . . . . . . . . . . . . . . . . . . . 1-7
reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
hard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12, 7-5
Index - 4
MC65 User Guide
soft . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12, 7-5
resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6
rigid holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
S
scanning
imaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
screen
calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
screen protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
SD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
secure digital card . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
security
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
service information . . . . . . . . . . . . . . . . . . . . . . . . . . .xvi
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
about . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
beam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
customer feedback . . . . . . . . . . . . . . . . . . . . . . . 9-2
encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
error reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
external GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
owner information . . . . . . . . . . . . . . . . . . . . . . . . 9-2
power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
regional settings . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
remove programs . . . . . . . . . . . . . . . . . . . . . . . . 9-3
screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
sounds & notifications . . . . . . . . . . . . . . . . . . . . . 9-1
Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
wireless manager . . . . . . . . . . . . . . . . . . . . . . . . 9-2
SIM card
accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
single slot USB cradle . . . . . . . . . . . . . . . . . . . . . . . 10-3
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3
charging indicators . . . . . . . . . . . . . . . . . . . . . . 10-4
Single-slot Ethernet/modem/USB cradle . . . . . . . . . 10-5
soft reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-12, 7-5
spare battery
3600 mAh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
charging . . . . . . . . . . . . . . . . . . . . . 1-6, 10-4, 10-12
spare battery charger
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
charging indicators . . . . . . . . . . . . . . . . . . . . . 10-12
setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
speaker icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
special character key . . . . . . . . . . . . . . . . . . . . . . . . B-18
speed dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-4, 4-11
spring loaded stylus . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
starting the EDA . . . . . . . . . . . . . . . . . . . . . . . . . 1-2, 1-6
status icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8, 2-14
speaker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1, 2-18, 10-2
subscriber identification module . . . . . . . . . . . . . . . . . 1-3
suspend . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7, 1-8, 7-5
synchronize with PC
using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . 7-12
T
task tray icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .A-2
charging . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6, 10-4
three-way call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5
U
unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
USB charge cable . . . . . . . . . . . . . . . . . . . . . . . . . 10-13
USB charging cable . . . . . . . . . . . . . . . . . . . . . . . . . 10-2
USB client charge cable . . . . . . . . . . . . . . . . . . . . . 10-13
USB cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
using stylus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
using wired headset . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
V
vehicle cradle . . . . . . . . . . . . . . . . . . . . . . . . 10-1, 10-10
charging indicators . . . . . . . . . . . . . . . . . . . . . . 10-11
vehicle holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
W
wall mounting kit, cradle . . . . . . . . . . . . . . . . . . . . . . 10-2
warm boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12, 7-5
Windows Live . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10
Windows Live Messenger . . . . . . . . . . . . . . . . . . . . 2-10
wired headset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
wireless manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2
wireless status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
WLAN 802.11a/b/g . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
WPAN Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii
Motorola Solutions, Inc.
1301 E. Algonquin Rd.
Schaumburg, IL 60196-1078, U.S.A.
http://www.motorolasolutions.com
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks or registered
trademarks of Motorola Trademark Holdings, LLC and are used under license. All other trademarks are
the property of their respective owners.
© 2013 Motorola Solutions, Inc. All Rights Reserved.
72E-161697-02 Revision A - August 2013