Miele Built-in coffee machine Operating instructions

Operating and installation instructions
Built-in coffee machine
CVA 6805 (C)
To avoid the risk of accidents
or damage to the machine,
it is essential to read these
instructions before it is installed
and used for the first time.
en - GB
M.-Nr. 09 549 930
Caring for the environment
Disposal of the packing
material
The packaging is designed to protect
the appliance from damage during
transportation. The packaging materials
used are selected from materials which
are environmentally friendly for disposal
and should be recycled.
Recycling the packaging reduces the
use of raw materials in the
manufacturing process and also
reduces the amount of waste in landfill
sites.
Disposal of your old machine
Electrical and electronic machines
often contain valuable materials. They
also contain materials which, if handled
or disposed of incorrectly, could be
potentially hazardous to human health
and to the environment. They are,
however, essential for the correct
functioning of your machine. Please do
not therefore dispose of it with your
household waste.
Please dispose of it at your local
community waste collection/recycling
centre, or contact your Dealer for
advice. Ensure that it presents no
danger to children while being stored
for disposal.
2
Contents
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Before using for the first time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Switching on for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Filling the water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Filling the coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Switching the coffee machine on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Spout adjustment (CupSensor) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Espresso, Coffee or Long coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Making two portions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cancelling preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Dispensing several cups of coffee one after the other (Coffee pot ²) . . . . . . . . . 29
Making espresso and coffee using ready ground coffee . . . . . . . . . . . . . . . . . . . 29
Drinks with milk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Milk flask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Dispensing hot water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Making drinks using a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
After making drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Coffee the way you like it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Grinder setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Altering the drinks parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Amount of coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Brewing temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Pre-brewing the coffee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Setting the portion size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Setting the portion size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Resetting drinks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
3
Contents
Setting up profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Calling up a profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Creating a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Selecting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Changing the name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Deleting a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Changing a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Processing drinks for a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Creating a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Changing a drink: changing the portion size(s), drinks parameters
and names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Deleting a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Calling up the "Settings" menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Changing and saving settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Possible setting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Info (Display information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Locking the coffee machine (System lock 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Water hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Activating and deactivating the mains water connection . . . . . . . . . . . . . . . . . . . 49
Plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Spout adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Demo mode (Showroom programme) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
4
Contents
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Quick guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Rinsing the coffee machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Rinsing the milk pipework manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Cleaning the milk pipework using the cleaning agent for milk pipework . . . . . 54
Milk flask and lid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Central spout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Conditioning the milk valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Sensor cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Waste container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Drip tray cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Coffee bean container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Central spout connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Interior and machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Brew unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Machine front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Cleaning blockages from the milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
After Sales / Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Plumbed in water connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Electrical connection U.K., ZA, IRL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Building-in and combination options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Adjusting the hinges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Copyright and licences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
5
Guide to the machine
Exterior view
a On/Off sensor K
b Touch display
c "Back" # sensor
d Handle
e Hot water spout
f Drip tray cover
g Central spout with lighting and automatic height adjustment
h Milk flask and lid
6
Guide to the machine
Interior view
i Ground coffee chute cover
j Brew unit
k Ground coffee chute
l Slide control to select fineness of
ground coffee
m Coffee bean container
n Water container with inlet device
o Drip tray with grid
p Waste container
q Drip catcher
r Central spout connector
s Service panel
7
Accessories
Accessories supplied
Optional accessories
– Measuring spoon
for ready ground coffee
Miele accessories and cleaning and
conditioning products are available for
your coffee machine.
– Milk flask with lid
for storing and heating/frothing milk
– Milk pipework cleaner
for cleaning the milk system
(Starter set)
– 2 containers (large and small)
for cleaning and maintenance
– Descaling tablets
for descaling the water pipework
(Starter set)
– Cleaning tablets
for degreasing the brew unit
(Starter set)
– Test strips
for determining the water hardness
level
– Cleaning brush
for cleaning the milk pipework
– Silcone grease
for lubricating the cap on the central
spout connector
– Central spout connector cap
– Angled connector for milk
pipework
Replacement part
These products and other useful
accessories can be ordered via the
internet, from Miele (see back cover for
contact details) or from your Miele
dealer.
8
– Microfibre cloth
for removing finger marks and light
soiling
– Milk flask with lid
for storing and heating/frothing milk
– Small lid
for storing the milk flask in the fridge
– Milk pipework cleaner
for cleaning the milk system
– Descaling tablets
for descaling the water pipework
– Cleaning tablets
for degreasing the brew unit
– Silcone grease
for lubricating the cap on the central
spout connector
Warning and Safety instructions
This coffee machine complies with all statutory safety
requirements. Inappropriate use can, however, lead to personal
injury and damage to property.
To avoid the risk of accidents and damage to the machine,
please read these instructions carefully before using it for the first
time. They contain important information on installation, safety,
use and maintenance.
Miele cannot be held liable for damage caused by
non-compliance with these instructions.
Keep these instructions in a safe place and ensure that new users
are familiar with the content. Pass them on to any future owner.
Correct application
~ This coffee machine is intended for use in domestic households
and similar working and residential environments. It is not intended
for outdoor use.
~ It must be used as a domestic appliance and only to make
espresso, cappuccino, latte macchiato etc.
Any other use is not permitted.
~ The coffee machine can only be used by people with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised whilst using it, or have been
shown how to use it in a safe way and recognise and understand the
consequences of incorrect operation.
9
Warning and Safety instructions
Safety with children
, The spouts present a danger of burning or scalding.
Children's skin is very sensitive and reacts to hot temperatures.
Do not allow them to touch hot components of the coffee machine
or to place any part of their body under the spouts.
~ Install the coffee machine where it is out of the reach of children.
~ Children under 8 years of age must be kept away from the
machine unless they are constantly supervised.
~ Children 8 years and older may only use the machine
unsupervised if they have been shown how to use it in a safe way
and recognise and understand the consequences of incorrect
operation.
~ Children must not be allowed to clean the coffee machine
unsupervised.
~ Please supervise children in the vicinity of the coffee machine
and do not allow them to play with it.
Remember that coffee and espresso are not suitable drinks for
children.
~ Danger of suffocation. Packaging, e.g. plastic wrappings, must
be kept out of the reach of babies and children. Whilst playing,
children could become entangled in packaging or pull it over their
head and suffocate.
10
Warning and Safety instructions
Technical safety
~ Installation and repairs may only be carried out by a Miele
authorised service technician. Installation, repairs and other work by
unqualified persons can cause considerable danger to users. The
manufacturer cannot be held liable for unauthorised work.
~ A damaged coffee machine could be dangerous. Before building
in the machine, check it for any externally visible damage. Do not
use a damaged machine.
~ To avoid the risk of damage to the machine, make sure the
connection data (voltage and frequency) on the data plate
corresponds to the household supply, before connecting the
machine to the mains supply. Consult a qualified electrician if in any
doubt.
~ The electrical safety of this machine can only be guaranteed if
correctly earthed. It is essential that this standard safety requirement
is met. If in any doubt, please have the electrical installation tested
by a qualified electrician.
~ Do not connect the machine to the mains electrical supply by a
multi-socket adapter or an extension lead. These are a fire hazard
and do not guarantee the required safety of the machine.
~ For safety reasons, this machine may only be used when it has
been built in.
~ If the coffee machine is to be built in above another appliance,
there must be a full-width, closed shelf between them (except when
it is combined with a Miele built-in plate or food warming drawer).
11
Warning and Safety instructions
~ The coffee machine must not be used in a non-stationary location
(e.g. on a ship).
~ The second electrical connection socket on the back of the
machine may only be used for connecting a Miele EGW 4000-29,
EGW 5000-14 plate warming drawer or an ESW 6x14, ESW 6x29
food warming drawer.
~ Only use the coffee machine in rooms where the ambient
temperature is between +10 °C and +38 °C.
~ Ensure that there is sufficient ventilation around the coffee
machine. The ventilation gaps in the furniture housing unit and the
gap between the top of the housing unit and the ceiling must be at
least 200 cm2. Otherwise condensation can build up and damage
the machine or the housing unit.
~ If the coffee machine is installed behind a kitchen furniture door,
it may only be used with the furniture door open. Do not close the
furniture door while the coffee machine is in use.
~ To avoid the risk of damage, please note the following regarding
connection to the mains water supply:
– The coffee machine must only be connected to a cold water
supply.
– The stopcock must be accessible after the machine has been
built-in.
– The protective sleeve of the water inlet hose must not be
damaged or become kinked.
12
Warning and Safety instructions
~ The integrated water protection system offers protection from
water damage, provided the following conditions are met:
– The coffee machine is correctly installed, connected to the
electrical supply and plumbed in.
– If a fault is identified, the machine must be repaired immediately.
– The stopcock is turned off when the machine is not used for a
longer period of time (e.g. during holidays).
~ While the machine is under guarantee, repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
guarantee is invalidated.
~ Miele can only guarantee the safety of the machine when original
Miele replacement parts are used. Faulty components must only be
replaced by genuine Miele original spare parts.
~ The machine must be disconnected from the electrical supply
during installation and repair work.
~ Do not open the outer casing of the machine. Tampering with
electrical connections or components and mechanical parts is
highly dangerous to the user and can cause operational faults.
~ Only use genuine original Miele accessories with this machine.
Using spare parts or accessories from other manufacturers will
invalidate the guarantee, and Miele cannot accept liability.
~ In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the appliance and
its surroundings clean at all times. Any damage caused by
cockroaches or other vermin will not be covered by the guarantee.
13
Warning and Safety instructions
Correct use
, The spouts present a danger of burning or scalding.
The liquids and steam dispensed are very hot.
Water in the drip tray can also be very hot. Take great care when
emptying it.
Please note:
– Keep well away from the area underneath the spouts when hot
liquids and steam are being dispensed.
– Do not touch hot components.
– The spouts can spray hot liquid or steam. Make sure that the
central spout is clean and that it is fitted correctly.
, Never look directly at the lighting or use optical instruments to
look at it.
~ The machine must not be used for cleaning objects.
~ Clean the coffee machine and the milk flask thoroughly before
using for the first time. Rinse through the coffee and milk pipework
(see "Cleaning and care").
14
Warning and Safety instructions
~ Please note the following regarding water:
– When using the water container: Only use cold, fresh tap water to
fill the water container. Hot water and other liquids could damage
the machine.
– Change the water every day to prevent a build-up of bacteria.
If the machine is connected to the mains water supply: Empty the
water container once a day.
– Do not use mineral water. Mineral water will cause serious
limescale deposits to build up in your machine and damage it.
– Do not use water from a reverse osmosis unit in this machine. This
would damage it.
~ Only fill the bean container with roasted espresso/coffee beans.
Do not fill the bean container with coffee beans which have been
treated with additives or with ground coffee.
~ Sugar will damage the machine. Only use pure coffee beans. Do
not use coffee beans which have been treated with anything
containing caramel, any kind of sugar or other substances. Do not
put liquids containing sugar in the coffee machine.
~ Only add ground coffee or the Miele cleaning tablets for
degreasing the brew unit to the ground coffee chute.
~ Do not use milk with additives. Sugar additives will stick to the
milk pipework and damage the coffee machine.
~ If using animal milk, use only pasteurised milk.
~ Do not place any alcohol mixtures which are alight underneath
the central spout. The flames could ignite plastic components and
cause them to melt.
~ Do not swing from or hang anything on the machine front when it
is open as this could damage the machine.
15
Warning and Safety instructions
~ Please note the following with regard to cleaning the coffee
machine:
– Always disconnect the coffee machine from the electrical supply
before cleaning.
– Clean the coffee machine and the milk flask every day (see
"Cleaning and care" for more information).
– Do not use a steam cleaner to clean the machine. Steam could
reach electrical components and cause a short circuit.
– Descale the coffee machine regularly using the appropriate
number of Miele descaling tablets for the water hardness level in
your area. Descale the machine more frequently in areas with very
hard water. Miele cannot be held liable for damage arising from
insufficient descaling.
– Degrease the brew unit regularly with Miele cleaning tablets.
Depending on the natural oil content of the coffee used, the brew
unit can become blocked quite quickly.
~ The central spout connector cap is lubricated with silicone
grease. Take care not to get this on your clothes when removing or
replacing the containers or other components.
For machines with stainless steel surfaces:
~ Do not use sticky notes, transparent adhesive tape, masking tape
or other types of adhesive on stainless steel surfaces. These
damage the surface, causing it to lose its dirt repellent protective
coating.
~ The finish on stainless steel surfaces is susceptible to scratching.
Even magnets can cause scratching.
16
Operation
Touch display
The coffee machine is operated by finger tip contact.
Touching the Touch display with your finger creates a tiny charge which releases
an electrical impulse. This impluse is picked up by the Touch display.
It is possible for the Touch display not to react to your finger contact if your fingers
are cold.
Do not use pointed or sharp objects, e.g. pens to operate the Touch display as
they can damage the surface.
The Touch display will also not react to being tapped by such objects.
Do not let water get behind the Touch display.
Screen
The screen is organised into three areas:
The top line shows you where you are in a menu. Touching the name of the menu
you want will open the menu. Touching "..." will return you to the menu above. The
time of day is displayed on the right hand side.
The control field in the middle: The current menu and options are displayed there.
The V and W arrows are used to scroll to the right or left and to select various
actions.
Using the bottom line you can go to the menus displayed by touching the
appropriate grey field.
The number of boxes in the middle indicates the number of available pages in the
current menu.
17
Operation
Operation
Each touch of an available option changes the relevant field to orange.
Selecting or calling up a menu
^ Touch the field you want once with your finger.
Scrolling
^ Swipe the screen, i.e. place your finger on the Touch display and swipe it in the
direction you want.
You can scroll to the right or the left. Some options allow you to scroll up and
down too.
^ Touch the V and W arrows to scroll to the left or right.
Exiting a menu (# sensor)
Touch the # sensor to revert to the previous screen. Entries made before this
which have not been confirmed with "OK" will not be saved.
Touching the # sensor three times in succession will take you to the drinks menu.
Touching the "Back" # sensor in the "Profile" menu will take you step by step back
to the beginning.
Entering numbers using the numerical keypad z
You can enter numbers by swiping and touching the roller or via the numerical
keypad.
Wait until the roller goes grey again. The entered setting will not be saved until
it goes grey.
^ Touch z.
18
Operation
The numerical keypad will appear.
^ Touch the numbers you want.
When you enter a valid number the "OK" field will go green.
^ Touch "OK".
Entering letters
Profile names or the names for your own drinks are entered using a keyboard. It is
best to select short names.
^ Touch the letters or characters you want.
^ Touch "Save".
19
Operation
The following symbols can appear in addition to the text and the drinks symbols:
P P P P G G GM
Settings, e.g. the brightness of the display or the volume of
the buzzer and keypad tones, are selected via a bar chart.
:
This indicates information and instructions about operating
the coffee machine.
Confirm the messages with "OK".
0
The system lock is active (see "Settings - Locking the coffee
machine (System lock 0)").: The coffee machine cannot be
operated.
+
The timer is activated for "Switch on at" (see "Settings –
Timer").
The symbol and the desired switching-on time appear in the
display 23:59 hours before the coffee machine is due to
switch on, as long as "On" or "Night dimming" is selected for
the time display.
8
This symbol appears while the milk pipework is being
cleaned.
(The symbol is also on the water container: fill the water
container up to this symbol).
F
This symbol appears while the descaling process is being
carried out.
(The symbol is also on the water container: fill the water
container up to this symbol).
20
Using for the first time
Selecting the language
Please read the operating
instructions carefully and take the
time to familiarise yourself with the
coffee machine before using it for
the first time.
Before using for the first time
^ The machine must be correctly
installed and connected (see
"Electrical connection" and
"Installation") before it is used for the
first time.
^ Remove any protective foil.
Clean the coffee machine thoroughly
(see "Cleaning and Care") before
filling it with water and coffee beans.
Switching on for the first time
When you switch the coffee machine on
for the first time, after the welcome
screen has appeared you will be
prompted to set the following:
^ Touch the language you want and
then "OK".
^ Touch the country you want and then
"OK".
The setting is now saved.
Setting the date
^ Swipe the "Day" field in the display
until the current day appears.
^ Repeat this for "Month" and "Year",
until the current date has been set.
^ Touch "OK".
The setting is now saved.
Setting the time (of day)
^ Swipe the "Hours" field in the display
until the number for the current hour
appears.
^ Repeat this for "Minutes", until the
current time of day has been set.
– Language
^ Touch "OK".
– Date
The setting is now saved.
– Time (of day)
– Display (Time (of day) display)
^ Touch the On/Off sensor K.
The welcome message "Miele Willkommen" will appear in the display
briefly.
21
Using for the first time
Display
Water hardness
You can choose from the following
options:
The water hardness level indicates how
much calcium is dissolved in the water.
The higher the calcium content, the
harder the water, and the harder the
water, the more often the coffee
machine will need to be descaled.
– On: the display will always show the
date and time (even when the
machine is switched off).
– Off: the display is dark when the
machine is switched off.
– Night dimming: the date and time
are only displayed between the
hours of 5:00 and 23:00.
^ Touch the option you want and then
"OK".
The coffee machine will use more
energy depending on the option you
choose for the display. Information
about this will appear in the display.
"Set-up successfully completed" will
appear in the display.
"Fill and replace the water container"
will appear in the display.
The coffee machine measures the
quantity of water and steam used. The
number of drinks which can be
dispensed before the machine needs to
be descaled will depend on the water
hardness level set.
Set the water hardness level on the
coffee machine to the water hardness
level for the local area to ensure that
the machine functions correctly and is
not damaged. This will ensure that the
reminder to descale the machine will
appear in the display at the correct
time.
The machine has four programmable
levels:
^ Fill the water container with fresh,
cold tap water.
Water hardness
Local water
hardness
level
Setting
(Hardness
level)
Tip: Please continue to work though the
further steps outlined in the operating
instructions so that you can familiarise
yourself with the coffee machine and
set it up for your specific requirements.
0 - 8.4 °dH
(0 -1.5 mmol/l)
Soft
Soft 1
8.4 - 14 °dH
(1.5 - 2.5 mmol/l)
Medium
Medium 2
14 - 21 °dH
(2.5 - 3.7 mmol/l)
Hard
Hard 3
more than 21 °dH Hard
(more than
3.7 mmol/l)
22
Very hard 4
Using for the first time
Checking the water hardness level
You can use the test strip supplied to
check the water hardness level, or your
local water supplier will be able to
advise you on the hardness of the water
in your area.
^ Dip the test strip in your drinking
water for a second, then shake off
any excess water. The result will be
evident after about a minute.
You can now set the water hardness
level for the coffee machine.
Setting the water hardness level
^ Touch "Settings" %.
^ Swipe the display until "Water
hardness" appears and then touch
this.
^ Touch the hardness level you want
and then "OK".
The setting is now saved.
23
Filling the water container
If the machine is plumbed into the
mains drinking water supply, the water
container will fill automatically as soon
as the machine is switched on.
The inlet device on the lid of the water
container ensures that the water is
taken in slowly.
You can also fill the water container
manually if you are not using the
plumbed in water supply.
,Bacteria can cause infection.
It is important to empty and fill the
container with fresh tap water every
day to avoid the risk of bacteria
building up.
^ Open the front of the coffee machine.
If filling the water container
manually:
Only use fresh, cold tap water.
Hot or warm water or other liquids
could damage the coffee machine.
Do not use mineral water. Mineral
water will cause serious limescale
deposits to build up in your machine
and damage it.
^ Pull the water container forwards to
remove it.
^ Take off the lid and fill the water
container with fresh, cold tap water
up to the "max." mark.
^ Push the water container into the
machine until it clicks into place.
If the water container protrudes
slightly or is a little high, check
whether the surface that the water
container sits on is dirty. If the water
container is not positioned correctly,
the outlet valve will not connect
properly and could leak. Clean the
surface, if necessary.
24
Filling the coffee bean container
If you want to use freshly ground coffee
beans for each cup of espresso or
coffee, fill the coffee bean container
with roasted coffee beans.
Alternatively, you can make coffee or
espresso with ready ground coffee (see
"Making coffee or espresso using ready
ground coffee").
Warning. Only put roasted
espresso/coffee beans in the
container.
Anything else, including ground
coffee, will damage the grinder.
Warning. Sugar will damage the
coffee machine.
Do not use coffee beans that have
been treated with sugar, caramel, or
other substances and do not put
liquids containing sugar in the
coffee bean container.
^ Pull out the coffee bean container.
^ Push back the lid and fill the
container with roasted coffee beans.
^ Slide the lid back into place,
^ Push the coffee bean container fully
back into the coffee machine. Close
the front.
25
Switching the coffee machine on and off
Switching on
Switching off
When the machine is switched on it
heats up and rinses out the pipework.
This cleans and heats the pipework in
preparation for making coffee.
^ Touch the On/Off sensor K.
If the coffee machine still has an
operating temperature higher than
60 °C, then rinsing will not take
place.
^ Touch the On/Off sensor K.
Tip: If you do not want the water from
the rinsing process to flow into the drip
tray, place a suitable container, e.g. the
small container supplied, underneath
the central spout before making the first
coffee of the day.
If coffee has been dispensed, the
coffee machine will rinse the coffee
pipework automatically before
switching off.
Switching off for longer
periods of time
If the machine is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ Empty the drip tray, the waste
container and the water container.
At first "Heating-up phase" will appear
in the display and once the coffee
machine has heated up, "Appliance
rinsing" will appear. Hot water will be
dispensed from the central spout.
You can now make drinks.
^ Clean all components thoroughly,
including the brew unit, the central
spout connector and the drip catcher
in the machine front.
^ Switch off the machine.
If you are leaving the front open while
the coffee machine is not in being
used for a long time, disconnect it
from the mains to save energy.
26
Spout adjustment (CupSensor)
Switching spout adjustment on or off
The central spout cannot be
adjusted manually.
The coffee machine senses the height
of the cup or glass being used. When a
drink has been selected the central
spout moves automatically to the
optimum height before dispensing the
drink.
Make sure that there is not a spoon
or similar item in the cup. This would
prevent the coffee machine from
sensing the cup height correctly.
^ Touch "Main menu" or the # sensor.
^ Touch "Settings" %.
^ Swipe the display until "Spout
adjustment" appears and then touch
this.
^ Touch the setting you want in order to
switch the spout adjustment on or off.
^ Touch "OK".
The setting is now saved.
You can switch off spout adjustment.
The central spout will then remain in the
upper position while the coffee machine
is switched on. When a maintenance
programme is being carried out the
central spout will move to the height of
the cleaning containers or into a
maintenance position.
When the coffee machine is switched
off the central spout will be in a middle
position.
27
Making drinks
Espresso, Coffee or Long
coffee
These drinks are in the drinks menu.
Making two portions
You can request two portions of
espresso, coffee or long coffee to be
dispensed at once either into one cup
or two separate cups.
These drinks are in the drinks menu.
To dispense two cups of coffee or
espresso at the same time:
^ Place a cup under the central spout.
^ Touch Espresso ., Coffee / or Long
coffee /.
The coffee or espresso will be
dispensed from the central spout into
the cup.
To ensure that any coffee residues
from the factory testing process are
removed from the brewing system,
please throw away the first two cups
of coffee when using the coffee
machine for the first time.
28
^ Place a cup under each of the coffee
dispensers in the central spout.
^ Touch the two cup symbol for the
drink you want.
Preparation will begin and two portions
of the desired drink will be dispensed
from the central spout.
Making drinks
Cancelling preparation
To cancel preparation:
^ Touch "Stop"
or
^ Touch "Cancel".
Dispensing several cups of
coffee one after the other
(Coffee pot ²)
You can make several cups of coffee
one after the other automatically with
the "Coffee pot" function (max. 1 litre).
Up to eight cups can be made at once.
^ Place a suitable container
underneath the central spout.
^ Swipe the display until "Coffee pot" ²
appears and then touch this.
Making espresso and coffee
using ready ground coffee
To make espresso or coffee using
ready ground coffee, add a portion of
ground coffee to the ground coffee
chute.
This gives you the option of making a
cup of decaffinated coffee, for
example, even though the coffee bean
container is filled with roasted coffee
beans.
The coffee machine will automatically
recognise that ready ground coffee has
been added to the ground coffee
chute.
Only one portion can be made at a time
when using ready ground coffee.
^ Touch the number of cups you want
(3 to 8).
^ Follow the instructions in the display.
The coffee for each cup is individually
ground, brewed and dispensed. Each
stage of the process is shown in the
display.
You can interrupt the process at any
time, by
^ touching "Cancel" or "Stop".
You can use the "Coffee pot" function
twice in succession. After this the
coffee machine will need to cool
down for an hour in order to avoid it
being damaged.
29
Making drinks
Adding ready ground coffee
Use the coffee spoon supplied.
Do not add more than one level
spoon of ground coffee to the coffee
chute. If too much is added, the
brew unit will not be able to process
the coffee.
The coffee machine will use all the
ground coffee which has been added
to the chute to make the next coffee.
^ Open the front of the coffee machine.
^ Remove the cover of the ground
coffee chute. Open the lid of the
chute.
Making espresso and coffee using
ready ground coffee
If you want to use ready ground coffee
to make the drink:
^ Touch "Yes".
You can now select whether you want
to dispense a coffee or an espresso
made with ground coffee.
^ Place a cup under the central spout.
^ Touch the drink you want.
This will now be dispensed.
If you do not want to use ready ground
coffee to make the drink:
^ Touch "No".
The ground coffee will be directed into
the waste container.
If no drink is selected within
approx. 15 seconds, the ground
coffee will be directed into the waste
container.
^ Add one level spoon of ready ground
coffee.
^ Close the lid. Push the cover into the
machine. Close the front.
"Use ground coffee?" will appear in the
display.
30
Making drinks
Drinks with milk
Only use pasteurised milk to avoid a
build-up of bacteria.
You can use milk to make different
coffee specialities, hot milk or milk
froth.
The following can be made:
Cappuccino H consisting of two thirds
milk froth and a third espresso.
a lid
Latte macchiato k consisting of a third
hot milk, a third milk froth and a third
espresso.
b sensor
Caffè latte ± consisting of hot milk
and coffee.
d glass flask
Milk flask
The milk will not keep cool in the milk
flask. It should therefore be kept in
the fridge if you are not going to be
using milk for a long period. Cold
milk (below 13 °C) gives the best
results for milk froth.
c milk suction tube
^ Fill the flask with milk up to a
maximum of 2 cm below the rim.
Close the flask with the lid.
It is important to keep the opening
and the neck of the flask clean
(whilst filling it and carrying it). If the
flask is dirty it may not work
properly.
Do not use milk with additives.
Sugar additives will stick to the milk
pipework.
^ Push the milk flask fully into the
coffee machine.
31
Making drinks
Making drinks with milk
Making drinks using a profile
These drinks are in the drinks menu.
If you have set the machine up for a
specific user profile (see "Profiles") you
can select this before you make a drink.
^ Place a suitable container
underneath the central spout.
^ Swipe the display until the drink you
want appears and then touch this.
The coffee selected will be dispensed.
^ Touch "Profile" {.
^ Swipe the display until "Select profile"
appears and then touch this.
^ Touch the profile you want.
Dispensing hot water
,Danger of burning and scalding
on the hot water spout. The water
dipsensed is very hot.
The profile name will appear in the
display to show that a profile has been
selected.
You can now make the drink you want.
After making drinks
Please note that the water dispensed
is not hot enough for making tea.
The hot water option is in the drinks
menu.
^ Place a suitable container
underneath the hot water spout.
^ Swipe the display until "Hot water"
appears and then touch this.
Hot water is dispensed into the
container under the spout.
To cancel preparation:
^ Touch "Cancel" or "Stop".
Preparation will be cancelled.
32
If you have made a drink with milk, the
following message appears in the
display after a while "Start rinse cycle"
^ Touch "OK".
The milk pipework will now be rinsed
through.
Even if you do not confirm the
message with "OK", the coffee
machine will rinse the milk pipework
after a few minutes automatically.
Coffee the way you like it
To customise the coffee machine to suit
your exact requirements, you can
– adjust the grinder setting,
– change the amount of coffee,
– set the brewing temperature, or
– switch on the "Pre-brewing" option.
Grinder setting
You can adjust the grinder setting to
suit the type of coffee you are using.
To avoid damaging the grinder:
Only ever adjust the grinder by one
setting at a time.
Grind the coffee beans again if you
want to adjust the grinder to the next
setting.
^ Open the front of the coffee machine.
When the beans are ground correctly,
the coffee or espresso will flow evenly
into the cup with a good crema.
The crema should have an even
nut-brown colour.
There are various ways to tell whether
the coffee grinder is set correctly.
The coffee is too coarsely ground, if
– espresso or coffee flows into the cup
very quickly.
– the crema is very pale and uneven.
^ Push the slide control one setting to
the left (for finer grinding) or one
setting to the right (for coarser
grinding).
Set a finer grinder setting.
^ Close the front.
The coffee is too finely ground, if
^ Make a coffee.
– espresso or coffee only trickles into
the cup.
Then move the slide control again.
– the crema is dark brown.
Set a coarser grinder setting.
The altered grinder setting will not be
used until after the second coffee has
been dispensed.
33
Coffee the way you like it
Altering the drinks parameters
You can set the amount of coffee,
pre-brewing and the brewing
temperature for each drink individually.
Start in the drinks menu.
^ Touch "Process" or swipe the screen
until "Make drinks" appears and
touch this.
^ Touch "Change drink".
^ Swipe the screen until the drink you
want appears and then touch this.
^ Touch "Drink parameters".
– espresso or coffee only trickles into
the cup.
– the crema is dark brown.
– the espresso or coffee tastes bitter.
Decrease the amount of coffee so that
less ground coffee is brewed.
^ Touch "Amount of coffee".
^ Touch the bar for the amount of
coffee you want and then "OK".
Brewing temperature
You can now:
The ideal brewing temperature will
depend on
– change the amount of coffee,
– the type of coffee,
– set the brewing temperature, or
– whether an espresso or a coffee is
being made, and
– switch on the "Pre-brewing" option.
Amount of coffee
The coffee machine can grind and
brew 6-14 g of coffee per cup. The
greater the quantity, the stronger the
coffee or espresso.
There are various ways to tell whether
the amount of coffee is set correctly.
The amount of coffee is too low, if
– espresso or coffee flows into the cup
very quickly.
– the crema is very pale and uneven.
– the espresso or coffee lacks body.
Increase the amount of coffee so that
more ground coffee is brewed.
The amount of coffee is too high, if
34
– the altitude of the region.
If the coffee machine is located at more
than 2000 metres above sea level, the
brewing temperature needs to be set
lower due to the change in pressure.
This is because the boiling point for
water at a high altitude is lower than the
boiling point for water at sea level.
There are five brewing temperatures.
Tip: Not all types of coffee can
withstand a high temperature. Certain
types are too delicate - the crema on
top would not be as good and the taste
would be impaired.
Coffee the way you like it
^ Swipe the screen in the "Brew
temperature" field until the setting you
want appears.
^ Touch "OK".
The setting is now saved.
Pre-brewing the coffee
When the Pre-brewing function is
switched on, the freshly ground coffee
is first moistened with a little hot water.
Then the remaining water is forced
through the moistened coffee at high
pressure. This helps release the flavour
of the coffee.
You can select a short or long
Pre-brewing, or deselect "Pre-brewing"
altogether.
The machine is delivered with
"Pre-brewing" switched off.
^ Swipe the screen in the "Pre-brewing"
field until the setting you want
appears.
^ Touch "OK".
The setting is now saved.
35
Setting the portion size
The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used.
You can programme the amount of
water used for espresso, coffee or hot
water to suit the size of your cup and
the type of coffee you are using.
Setting the portion size
For coffee made with milk, in addition to
programming the portion size of coffee
you can programme the amount of milk
and milk froth used. You can also
programme the portion size for hot milk
and froth.
^ Swipe the screen until the drink you
want appears and then touch this.
There is a maximum amount which can
be programmed for each type of drink.
Preparation stops when this is reached.
The maximum amount possible for that
type of drink will then be saved.
^ Touch "Save" when the cup has been
filled to the level you want.
The changed portion size is always
saved in the current profile. The
name of the current profile is shown
in the top left of the display.
If there is insufficient water in the
water container, the process for
programming the amount will be
stopped and the amount will not be
saved.
Start in the drinks menu.
^ Place the desired cup under the
central spout.
^ Touch "Process".
^ Touch "Change drink".
^ Touch "Change the portion size".
The required drink will be prepared and
"Save" will appear in the display.
If you want to change the portion size
for cappuccino, latte macchiato or
caffè latte, the ingredients
(components) which make up the drink
will appear in the display.
Cappuccino: milk froth, espresso
Latte macchiato: hot milk, milk froth,
espresso
Caffè latte hot milk, coffee
^ Touch the ingredients you want to
programme the portion size for.
The ingredients selected will have a tick
9 beside them.
^ Touch "OK".
36
Setting the portion size
The coffee machine starts making the
drink. You can now programme the
portion size for each selected
ingredient as soon as Save appears in
the display.
^ Touch "Save" when the amount you
want of the particular ingredient has
been dispensed.
^ Save the portion size required for the
selected ingredients.
The programmed mix of ingredients
and portion sizes will now be
dispensed every time that particular
drink is selected.
37
Resetting drinks
You can reset the portion sizes and the
parameters for all drinks back to their
factory default setting.
Start in the drinks menu.
^ Touch "Process".
^ Touch "Reset drinks".
"Reset all drinks to default?" will appear
in the display.
^ Touch "Yes".
38
Setting up profiles
You can enter individual profiles to
cater for different tastes and
preferences. For each individual profile
you can select the portion sizes for
each drink (see "Setting the portion
size").
The name of the current profile is
shown in the top left of the display.
– Change profile, to programme the
coffee machine so that it changes
back to the Miele standard profile
automatically after each drink is
dispensed or so that it retains the
most recently selected profile.
Creating a profile
^ Touch "Create profile".
Calling up a profile
The editor will open in the display.
^ Touch "Profiles" { in the main menu or
the "Profiles" field in the drinks menu.
^ Enter the name you want and touch
"OK".
^ You can now create a profile.
If you have already created a profile in
addition to the standard Miele profile,
you also have the following options:
– Select profile from the profiles which
are already allocated.
– Change name, if you want to alter
the name of a profile.
– Delete profile, if you want to delete a
profile.
Selecting a profile
^ Touch the profile you want.
The name of the current profile is
shown in the top left of the display.
Changing the name
^ Touch "Process".
^ Touch "Change name".
^ Touch the profile you want and then
"OK".
^ Enter the name you want and then
touch "OK".
39
Setting up profiles
Deleting a profile
^ Touch "Process".
^ Touch "Delete profile".
^ Touch the profile you want and then
"OK".
Changing a profile
You can programme the coffee
machine so that it changes back to the
Miele standard profile automatically
after each drink is dispensed or so that
it retains the most recently selected
profile.
^ Touch "Process".
^ Touch "Change profile".
You now have the following options:
Manually
The currently selected profile will be
retained until you select another profile
manually.
After each use
The machine will change back to the
Miele standard profile automatically
after a drink is dispensed.
When switched on
Each time the machine is switched on it
will automatically select the Miele standard profile regardless of which profile
was selected before the machine was
last switched off.
^ Touch the option you want and then
"OK".
40
Processing drinks for a profile
You can create your own drinks for
each profile and set the portion size
and drinks parameters, e.g. amount of
coffee, brewing temperature for each
drink individually.
You can also change the names of the
drinks and delete any unwanted drinks
from the profile. A profile can contain a
maximum of nine drinks.
^ Enter a name for the newly created
drink (maximum of 8 characters) and
touch "Save".
The newly created drink will appear in
the profile.
Changing a drink: changing
the portion size(s), drinks
parameters and names
^ Touch "Profiles" { in the main menu or
the "Profile" field in the drinks menu.
^ Touch "Process".
^ Select the profile you want.
^ Touch "Change drink".
The name of the current profile is
shown in the top left of the display.
^ Swipe the screen until the drink you
want appears and then touch this.
Creating a drink
You can create new drinks based on
existing drinks. A profile can contain a
maximum of nine drinks.
The "Create drink" option will only
appear if there are less than nine drinks
already in the profile.
^ Touch "Process".
^ Touch "Create drink".
You can now select from the standard
drinks:
You can now either change the portion
size(s), drinks parameters or the names
as described in "Setting the portion
size" and "Coffee the way you like it".
Deleting a drink
^ Touch "Process".
^ Touch "Delete drink".
^ Swipe the screen until the drink you
want appears and then touch this.
^ Touch "OK".
^ Swipe the screen until the drink you
want appears and then touch this.
^ Change the drinks parameters and
the portion size(s) for this drink (see
"Coffee the way you like it" and
"Setting the portion size").
Preparation will begin and you can
save the portion size you want for the
individual ingredients.
41
Settings
You can use the "Settings" menu to
customise the coffee machine to suit
your requirements.
Changing and saving settings
^ Touch "Main menu" or the # sensor.
^ Touch "Settings" % .
Calling up the "Settings" menu
Start in the drinks menu.
^ Touch "Main menu" or the # sensor.
^ Touch "Settings" % .
You can now check or alter settings.
Touch # to return to the previous
menu.
The settings which are currently
selected will have a coloured frame
around them.
42
^ Swipe the screen until the setting you
want appears and then touch this.
^ Swipe the screen until the option you
want appears and then touch this.
The setting is now saved.
Settings
Possible setting options
The factory setting for the option is shown in bold.
Option
Available settings
Language
Deutsch, English and other languages
Country
Time
Display
Off / On / Night dimming
Clock type
Analogue /Digital
Clock format
12 h / 24 h
Set
Date
Set
Timer
Timer 1
Set
Switch on at / Switch off after (1:00) / Switch off at
Days of the week
Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
Sunday / Accept
Activate
Switch on at (Yes / No) / Switch off at (Yes / No)
Timer 2
Set
Switch on at / Switch off at
Days of the week
Monday / Tuesday / Wednesday / Thursday / Friday / Saturday /
Sunday / Accept
Activate
Switch on at (Yes / No) / Switch off at (Yes / No)
Eco mode
Eco mode (On / Off)
Lighting
Brightness
Switch off after
Info
Number of drinks
Total no. of portions / espresso / coffee / long coffee / cappuccino /
latte macchiato / cafè latte / milk froth / hot milk / hot water
No. of uses until
Descaling / Degreasing the brew unit
System lock
On / Off
Water hardness
Soft 1
Medium 2
Hard 3
Very hard 4
43
Settings
Option
Available settings
Brightness
Set
Volume
Buzzer tones
Keypad tone
Plate warmer
On / Off / Automatic
Mains water
On / Off
Spout adjustment
On / Off
Showroom programme
Demo mode (On / Off)
Factory default
Do not reset
Reset
44
Settings
Language
Clock type
You can select the language (and
country variant of that language) for all
the display text.
The time can be displayed as
Tip: If you select the wrong language
by mistake, follow the flag symbol F to
find the "Language" option again.
Time
Analogue or
You can set the time display, the clock
format and the time.
Display (Time of day display)
You can choose from the following
options:
– On: The time will show in the display
all the time, even when the machine
is switched off.
Digital.
– Off: The time will not show in the
display when the machine is
switched off.
The options are:
– Night dimming: The time will only
show in the display during the
daytime.
– 12-hour display (12 h)
The coffee machine will use more
energy depending on the option you
choose for the display. Information
about this will appear in the display.
Clock format
– 24-hour display (24 h)
Setting the time
You set the hours and minutes.
Date
You set the day, month and year.
45
Settings
Timer
There are two timers with the following
functions:
The coffee machine
– switches on at a particular time, e.g.
in the morning for breakfast ("Switch
on at").
– switches off at a particular time
("Switch off at").
– switches off after a particular length
of time if none of the sensors have
been touched or a drink has not
been made ("Switch off after"; Timer
1 only).
You can also allocate timer functions to
individual days of the week.
For "Switch on at" and "Switch off at",
the timer must be activated and at
least one day of the week allocated.
Selecting a timer
The options are:
– Timer 1:
Switch on at, Switch off at, Switch off
after
– Timer 2:
Switch on at, Switch off at
Switch on at
Please note that the coffee machine
will not switch on at the required time
if you have activated the system lock.
If the coffee machine has switched
itself on using the "Switch on at" timer
function 3 times and no drinks have
been dispensed, the machine will not
switch itself on again automatically.
This prevents the coffee machine from
switching itself on unnecessarily, for
example whilst you are away on holiday.
The programmed times will, however,
remain in memory and will be
reactivated after manually switching the
machine on again.
Switch off at
If the coffee machine is not used for a
long time, e.g. whilst you are away on
holiday, the saved times will be
reactivated after manually switching the
machine on again (see "Switch on at")
Switch off after
The "Switch off after" timer function is
only available in Timer 1.
If none of the sensors have been
touched or a drink has not been made,
the coffee machine will switch itself off
after 30 minutes to save energy.
You can change this to another time of
between 15 minutes and 9 hours.
46
Settings
Allocating days of the week
Eco mode
Select the day of the week you want.
The day of the week selected will be
marked with a tick 9.
The Eco mode is an energy-saving
mode. The steam system only heats up
when a coffee or steam for hot milk or
milk froth is selected.
When all days of the week required are
marked,
^ Touch "OK".
Activating and deactivating the timer
If the timer is activated for "Switch on
at", the + symbol and the desired
switching-on time appear in the display
23:59 hours before, as long as "On" or
"Night dimming" is selected for the time
display.
With Eco mode switched off, milk froth
or hot milk, and coffee or espresso can
be made in rapid succession. The
steam system remains heated up and
this uses considerably more energy.
A message regarding energy
consumption will appear in the display.
When the system lock is activated,
the "Switch on at" option for the timer
will not work.
Select the timer function you want. The
timer function selected will be marked
with a tick 9.
When the timer functions required are
marked,
^ Touch "OK".
47
Settings
Lighting
Info (Display information)
You have the following options:
In the "Info" option, the number of
portions prepared for each individual
drink can be displayed.
– You can set the brightness when the
machine is switched on.
– You can set the brightness when the
machine is switched off.
– You can specify when the lighting
should switch off ("Switch off after").
Set the brightness
First select:
– Appliance switched on
– Appliance switched off
Setting the time the lighting switches
off (Switch off after)
You can adjust the length of time that
the coffee machine remains lit up after
switching off.
When the coffee machine is switched
on, it remains lit up for 10 minutes after
the last action. This time cannot be
altered.
You can also see whether more than 50
portions can be dispensed before the
machine needs to be descaled ("No. of
uses until descaling").
To return to the previous display,
^ Touch "OK".
Locking the coffee machine
(System lock 0)
You can lock the coffee machine to
prevent it being used without your
knowledge, by children, for example.
Activating or deactivatiing the
System lock 0
When the system lock is activated,
the "Switch on at" option for the timer
will not work.
Overriding the System lock
Whilst "Press for 5 seconds to unlock" is
showing in the display,
^ touch the the lock symbol for 5
seconds.
As soon as you switch the coffee
machine off, the system lock will be
activated again and the coffee
machine is locked again.
48
Settings
Water hardness
Please see "Using for the first time" for
information about water hardness.
Brightness
You can set the brightness of the
display in the bar chart.
Volume
You can set the volume of the buzzer
and keypad tones in the bar chart.
Activating and deactivating the
mains water connection
The coffee machine is designed to be
plumbed into the mains drinking water
supply. Water is automatically taken
into the water container when the
machine is set up for a plumbed
supply. If this option is switched off the
water container has to be filled
manually.
Plate warmer
A warming drawer can be connected
directly to a socket at the rear of the
coffee machine using a special
connection cable (available as an
optional accessory). Miele or your Miele
dealer will be able to advise you on
which warming drawers are suitable.
You can choose from the following
options:
– Automatic: The plate warming
drawer will switch on and off together
with the coffee machine.
If you have programmed the coffee
machine to switch on at a specific
time ("Switch on at" Timer function),
the plate warming drawer will switch
on approximately 30 minutes before
the coffee machine is due to switch
on so your cups are warmed up
ready for your coffee.
– On: You can switch the plate
warming drawer on and off manually
whenever you want, independently of
the coffee machine.
– Off: The plate warming drawer will
not switch on because the coffee
machine is not supplying it with any
electricity.
The coffee machine is delivered with
the "Off" option for the plate warmer
setting selected.
Spout adjustment
Please go to "Spout adjustment
(CupSensor)" for details of this feature.
The special connection cable required
is available to order from Miele or your
Miele dealer.
Once the plate warming drawer is
connected, you will need activate it in
the "Settings" menu.
49
Settings
Factory default
You can reset the settings back to the
ones which were set when the coffee
machine was delivered - the factory
default settings.
Please refer to the "Possible setting
options" chart for the factory settings
which are shown in bold.
Please note that the following settings
will not be reset:
- Language
- Time of day
- Number of drinks (dispensed)
- Profiles
50
Demo mode (Showroom
programme)
Do not activate this setting for
domestic use!
The coffee machine can be
demonstrated in the showroom or at
exhibitions using the "Showroom
programme" In this mode the machine
lights up but drinks cannot be made or
actions taken.
The coffee machine cannot be
switched off with the
On/Off sensor K when demo mode is
activated.
Cleaning and care
Quick guide
,Clean the coffee machine every day to prevent a build-up of bacteria.
Recommended frequency
What do I have to clean / maintain?
Every day
(at the end of the day)
the milk flask and lid
the water container
the waste container
the drip tray and the drip tray cover
Once a week
(or more often if badly soiled)
the central spout
the central spout connector
Clean the milk valve with the cleaning brush
the interior
the small drip catcher inside the front of the machine
the brew unit
the front of the machine (especially straight after descaling)
Once a month
lubricate the cap on the central spout connector
When prompted to
the milk pipework (using the cleaning agent for milk
pipework)
the brew unit (degrease with the cleaning tablets)
descale the machine
As required
the coffee bean container
use the cleaning brush to remove any blockages from the
milk pipework
Some components of the coffee machine are dishwasher safe. Cleaning these
in the dishwasher frequently can cause them to become discoloured due to
regular contact with food residues (e.g. tomatoes) in the dishwasher. The
surface can also become damaged.
The following must be cleaned by hand only:
– Central spout cover
– Brew unit
– Coffee bean container and the coffee bean container lid
– Service panel
51
Cleaning and care
,Danger of burning.
Allow the coffee machine to cool
down before cleaning. Please be
aware that the water in the drip tray
will be very hot.
Do not use a steam cleaning
appliance to clean the coffee
machine as this will damage the
machine.
Do not use cleaners containing
chlorides, acids, soda or scouring
agents. These would damage the
surface.
All surfaces are susceptible to
scratching. Scratches on glass
surfaces could even cause a
breakage.
Contact with unsuitable cleaning
agents can discolour the surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
Avoid the following on all types of
front:
– cleaning agents containing soda,
ammonia, acids or chlorides,
– solvent-based cleaning agents,
It is important to clean the machine
regularly, as the used coffee grounds
will soon go mouldy. Sour milk deposits
can block the milk pipework.
The central spout connector cap is
lubricated with silicone grease. Take
care not to get this on your clothes
when removing or replacing the
containers or other components.
– cleaning agents containing
descaling agents,
– stainless steel cleaning agents,
– dishwasher cleaner,
– oven cleaner,
– glass cleaning agents,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– hard, abrasive sponges, e.g. pot
scourers, brushes or sponges which
have been previously used with
abrasive cleaning agents,
– melamine eraser blocks,
– sharp metal scrapers.
52
Cleaning and care
Rinsing the coffee machine
When a coffee drink has been
dispensed, the coffee machine rinses
itself before switching off to remove any
remaining coffee residue.
You can also rinse the coffee pipework
manually.
^ Touch "Main menu" or the # sensor.
Milk pipework
All parts of the milk system need to
be cleaned thoroughly and regularly
Milk contains bacteria which
proliferate rapidly with inadequate
cleaning. A dirty machine can be
harmful to health.
^ Touch "Maintenance" y.
Rinsing the milk pipework manually
^ Touch "Rinse the appliance".
Milk residue can clog up the milk
pipework. If you have made a drink with
milk, the coffee machine will rinse the
milk pipework after a few minutes.
The pipework will now be rinsed
through. The water used for the rinsing
process will run out of the central spout.
You can also rinse the milk pipework
manually.
^ Touch "Main menu" or the # sensor.
^ Touch "Maintenance" y.
^ Touch "Rinse the milk pipework".
The milk pipework will now be rinsed
through.
53
Cleaning and care
Cleaning the milk pipework using the
cleaning agent for milk pipework
All parts of the milk system need to
be cleaned thoroughly and regularly
Milk contains bacteria which
proliferate rapidly with inadequate
cleaning. A dirty machine can be
harmful to health.
The milk pipework must be cleaned at
least once a week. The coffee machine
will prompt you at the correct time.
"Clean the milk pipework in 3 days" will
appear in the display three days before
the coffee machine is due to be
cleaned. Each time the coffee machine
is switched on the number of days until
the milk pipework needs to be cleaned
will appear in the display.
^ To confirm this message, touch "OK".
When the number of days reaches 0,
"Clean the milk pipework will appear in
the display. You cannot make drinks
with milk until cleaning has been
carried out.
^ Touch "OK".
You can now only dispense espresso,
coffee, long coffee and hot water. You
will only be able to make drinks with
milk once the milk pipework has been
cleaned.
The cleaning process cannot be
cancelled once it has started. The
process has to be carried through to
the end.
54
^ Touch "Main menu" or the # sensor.
^ Touch "Maintenance" y.
^ Touch "Clean the milk pipework".
The process will start and various
messages will appear in the display.
^ Follow the instructions.
When "Fill water container with
lukewarm water and cleaning agent up
to the 8 symbol and replace it"
appears, proceed as described below.
Preparing the cleaning solution
The cleaning agent for the milk system
was developed specifically for this
coffee machine. It is available to order
from Miele (see back page for contact
details), your Miele dealer or via the
internet at www.miele-shop.com.
To avoid damaging the coffee
machine, use this cleaning agent
only.
^ Add one sachet of the cleaning agent
for the milk pipework to the water
container.
Cleaning and care
Milk flask and lid
It is important to keep the neck and
flange of the flask clean (whilst filling it
and carrying it). If the flask is dirty it
could cause a fault with the machine.
^ Clean the milk flask in the dishwasher
or by hand using hot water and a little
washing-up liquid. Dry the milk flask
thoroughly.
^ Fill the water container up to the 8
mark with lukewarm water and stir the
solution.
Before placing the lid in the
dishwasher:
Follow the instructions on the packet
carefully. It is important that you fill
the water container with enough
water. Otherwise the milk pipework
will not be cleaned properly.
^ Replace the water container in the
coffee machine and close the front.
^ Follow the instructions in the display.
When "Fill and replace the water
container" appears:
^ Remove the water container and
rinse it carefully with clean water.
Make sure that no cleaning agent is
left in the water container. Fill the
water container with fresh tap water
and replace it in the machine.
^ Rinse the milk pipework in the lid
under running water.
If when doing this, no water runs out of
the milk pipework a,
^ clean the lid as described in
"Cleaning blockages from the milk
pipework - Step 1: Cleaning the milk
pipework in the lid of the milk flask".
The cleaning process is complete when
"Remove container. Process finished"
appears.
55
Cleaning and care
Central spout
Clean the cover of the central spout by
hand only using hot water and a little
washing-up liquid. All other parts are
dishwasher safe.
The central spout must be in the
maintenance position for cleaning.
Otherwise you will not be able to
remove the parts.
If there is a container underneath the
central spout, make sure that you
remove this as it would prevent the
central spout from moving into the
maintenance position.
^ Press catch a upwards, grasp the
dispensing unit by the handle und
pull this forwards and off b.
^ Touch "Main menu" or #.
^ Touch "Maintenance" y.
^ Touch "Clean the central spout".
The central spout will move into
maintenance position a.
^ Hold the magnets at the side and pull
forwards to release the unit.
^ Pull the cover forwards and off b.
56
Cleaning and care
^ Turn upper connecting piece a and
pull it upwards to remove it. Remove
lower connecting piece b in the
same way.
^ Pull off dispensers c.
The Y-piece connnector must not be
removed.
^ Reassemble the dispensing unit in
the reverse order: Make sure that
upper connecting piece a clicks into
position. Press dispensers b firmly
onto the dispensing unit.
^ Replace the dispensing unit in the
central spout.
^ Replace the cover.
^ Clean all parts thoroughly.
^ Clean the surfaces around the central
spout (see arrow) with a
well-wrung-out damp cloth.
57
Cleaning and care
Conditioning the milk valve
Sensor cover
The milk valve should be cleaned once
a week to ensure good quality milk
froth.
The sensor cover for the cup protection
cut-out is located under the central
spout. If the automatic spout
adjustment sensors do not clearly
recognise a container, this sensor will
stop the central spout.
^ Touch "Main menu" or the # sensor.
^ Touch "Maintenance" y.
^ Touch "Clean the central spout".
The central spout will move into the
maintenance position.
If required, the sensor cover can be
cleaned by hand using hot water and a
little washing-up liquid.
Important. You must remove the
cleaning brush before confirming
"Quit maintenance position" with
"OK". Otherwise the coffee machine
will be damaged.
^ To remove, press and hold the
sensor cover between the dispensers
a. Then press the central spout in
from the sides at the back b.
This will release the sensor cover.
^ Insert the brush in the milk valve.
Move the brush back and forth.
^ Touch "OK".
The milk valve will move into the correct
position and the milk pipework will be
rinsed through.
58
^ To replace, insert both hooks at the
back and press the sensor cover
upwards.
Cleaning and care
Water container
Waste container
Change the water every day to prevent
a build-up of bacteria.
After a certain period of time a reminder
to empty the waste container will
appear in the display. The waste
container must be cleaned when this
message appears. However, it is better
to clean the waste container every day
to prevent coffee grounds from turning
mouldy.
There will probably also be water in the
waste container left over from the
rinsing process.
Make sure that the valve, the
underside of the water container and
the surface the water container sits
on are clean. Otherwise the water
container will not sit correctly.
^ The water container can be cleaned
in the dishwasher or by hand using
hot water and a little washing-up
liquid. After cleaning, dry the water
container.
^ Clean the waste container with hot
water and a little washing-up liquid or
in the dishwasher, and dry with a
cloth.
^ Also thoroughly clean the now
accessible area in the machine
where the waste container sits.
^ Carefully clean the surface the water
container sits on, taking special care
to clean the recesses properly.
59
Cleaning and care
Drip tray
Clean the drip tray every day to
prevent unpleasant odours and
mildew.
A message will appear in the display
when the drip tray is full and needs to
be emptied. Remove the tray and
empty it at the latest when this
message appears.
,Danger of burning. If the rinsing
process is in progress, wait a while
before removing the drip tray so that
you catch any remaining water from
the system.
^ Open the machine front, and
carefully remove the drip tray from
the machine.
The grid in the drip tray prevents the
water from spilling out of the tray
when it is being carried.
^ Clean the drip tray and the grid with
hot water and a little washing-up
liquid, or in the dishwasher and dry
with a cloth.
60
Make sure that the metal contact
discs on the drip tray are cleaned
and dried properly. The discs will not
be able to detect that the drip tray is
present or that it is full if they are dirty
or damp.
^ Clean the space under the drip tray
^ Push the drip tray back into the
coffee machine.
Make sure the drip tray has been
pushed right into the machine as far
as it will go.
Cleaning and care
Drip tray cover
Central spout connector
^ Remove the drip tray cover.
The part which connects the brew unit
and the central spout is located on the
inside of the machine door.
^ It can be cleaned in the dishwasher
or by hand using hot water and a little
washing-up liquid.
^ Dry the drip tray thoroughly.
^ Clean this connection regularly with a
damp cloth, taking care not to wipe
the grease off the cap.
^ Refit the cover on the drip tray
making sure that it sits flush at the
front.
^ Lubricate the cap at least once a
month with the silicone grease
supplied.
Coffee bean container
^ Take the coffee bean container out of
the machine and then push the lid
back to remove it.
^ Clean the coffee bean container and
the lid by hand using hot water and a
little washing-up liquid, and then dry
them both thoroughly.
^ Replace the lid, and push the
container back into place in the
machine.
61
Cleaning and care
Interior and machine front
^ First take out all removable parts and
then clean the interior and the
machine front with a mild solution of
hot water and washing-up liquid.
Tip: Use your vacuum cleaner to
remove dry coffee grounds.
A small drip catcher is located inside
the front of the machine at the bottom.
Brew unit
Clean the brew unit by hand only
using hot water. Do not use
washing-up liquid or any other
cleaning agent. The moving parts of
the brew unit are lubricated.
Washing-up liquid or cleaning agent
will damage the brew unit.
Clean the brew unit once a week.
Removing the brew unit and washing
by hand
The brew unit can be removed for
cleaning. To do this:
^ Open the front of the machine.
^ Remove the water container, waste
container and the coffee chute cover.
^ Remove the drip catcher and clean it
in the dishwasher or by hand using
hot water and a little washing-up
liquid.
After cleaning, remember to replace
the drip catcher in the coffee
machine.
^ Press the button under the handle of
brew unit a and whilst doing so, turn
the handle clockwise b.
^ Press the catch in front of the brew
unit c downwards, and pull the brew
unit out carefully.
^ Carefully pull the brew unit out of the
coffee machine.
62
Cleaning and care
If you cannot remove the brew unit or
can only do so with difficulty, the brew
unit is not in the correct position (see
"Problem solving guide").
When the brew unit has been pulled
out, do not alter the position of the
brew unit handle. This would
displace the brew unit and it would
not fit back into the coffee machine.
^ Clean the brew unit by hand under
hot running water without using
washing-up liquid or any other
cleaning agent.
^ Press the button under the handle of
the brew unit a and whilst doing so
turn the handle anti-clockwise b.
^ Close the front.
^ Wipe any remaining coffee off the
filters. One filter is located in the
funnel and the other to the left of the
funnel.
^ Dry the funnel to prevent ground
coffee sticking to it.
^ Clean the inside of the coffee
machine. Use your vacuum cleaner
to remove dry coffee grounds.
To replace the brew unit proceed in the
reverse order:
^ Push the brew unit back into the
coffee machine, making sure it is
straight.
63
Cleaning and care
Degreasing the brew unit
Depending on the natural oil content of
the coffee used, the brew unit can
become blocked quite quickly.
Therefore use the cleaning tablets
supplied to clean the brew unit.
When "Place a cleaning tablet in the
ground coffee chute and close the
chute" appears in the display:
These have been specially formulated
for use in this coffee machine and are
available to order from Miele (see back
page for contact details), your Miele
dealer or via the internet at
www.miele-shop.com.
After 200 portions have been
dispensed, "Degrease the brew unit"
will appear in the display. This
message will not go out until
degreasing has been carried out.
Degrease the brew unit regularly.
This is necessary to ensure that the
coffee machine continues to
dispense excellent coffee and to
operate problem-free.
The cleaning process cannot be
cancelled once it has started. The
process has to be carried through to
the end.
^ Switch the machine on with the
On/Off sensor K.
^ Touch "Main menu" or the # sensor.
^ Touch "Maintenance" y.
^ Touch "Degrease the brew unit".
^ Follow the instructions in the display.
64
^ Remove the coffee chute cover and
open the lid of the coffee chute.
^ Place a cleaning tablet into the coffee
chute.
^ Close the lid, replace the coffee
chute cover and close the machine
front.
^ Follow the instructions in the display.
When "Process finished" appears in the
display:
^ Touch "OK".
The brew unit has now been cleaned.
Cleaning and care
Machine front
If soiling is not removed promptly it
could cause the surfaces of the
machine to alter or discolour.
Remove any soiling immediately.
Make sure that water cannot get in
behind the display.
All external surfaces are susceptible
to scratching. Scratches on glass
surfaces could even cause a
breakage.
Contact with unsuitable cleaning
agents can discolour the surfaces.
Wipe up any spillages or splashes
of descaling agent immediately.
^ Switch the machine off with the
On/Off sensor K.
^ Clean the front with a clean sponge
and a solution of hot water and
washing-up liquid. Dry using a soft
cloth.
Tip: You can also use a microfibre
cloth to clean the front.
65
Descaling
Limescale builds up in the coffee
machine during use. How often, will
depend on the hardness of the local
water supply. Limescale must be
removed regularly.
The machine will guide you through the
descaling procedure. Various
instructions will appear in the display,
e.g. you will be prompted to empty the
drip tray, fill the water container, etc.
Descaling must be carried out. The
process takes approx. 20 minutes.
During the descaling process, water
containing descaling agent will run out
of the central spout and the hot water
spout. This is followed by an activation
period before a little more water
containing descaling agent is
dispensed.
The coffee machine will remind you
when descaling needs to be carried
out. The following message will appear
in the display: "No. of uses until
descaling: 50". The remaining number
of drinks that can be made before
descaling will now show in the display
after each drink is made.
^ To confirm this message, touch "OK".
When 0 is reached, the coffee machine
will lock out. "Descale the appliance"
will appear in the display.
You can switch the coffee machine off if
you do not want to descale it at this
time. However, you will not be able to
make any more drinks until descaling
has been carried out.
66
Descaling after being prompted by
the display
The descaling process cannot be
cancelled once it has started. The
process has to be carried through to
the end.
^ Touch "OK" to start descaling immediately.
The process will start and various
messages will appear in the display.
^ Follow the instructions.
When "Fill water container with
lukewarm water and descaling agent
up to the F symbol and replace it"
appears in the display, proceed as
described below.
Preparing the descaling solution
The descaling tablets supplied have
been specially formulated for use with
this coffee machine and are available to
order from Miele (see back page for
contact details), your Miele dealer or
via the internet at www.miele-shop.com.
You will need two descaling tablets for
each descaling process.
Only use Miele descaling tablets.
Other types of descaling agents will
damage the coffee machine and
affect the taste.
Descaling
^ Touch "OK".
The coffee machine has now been
descaled and can be used for making
drinks again.
When descaling the machine, wipe
up any spillages or splashes of
descaling agent immediately. These
would damage the surface.
^ Fill the water container up to the F
symbol with lukewarm water.
^ Drop two descaling tablets in the
water.
Follow the instructions for the mixing
ratio carefully.
It is important that you fill the water
container with the correct amount of
water. Otherwise the descaling
programme will be cancelled
prematurely.
^ Replace the water container in the
coffee machine and close the front.
^ Follow the instructions in the display.
After descaling the machine, carefully
rinse the water container and the drip
tray to remove all traces of descaling
agent.
Descaling when not prompted
by a message
The descaling process cannot be
cancelled once it has started. The
process has to be carried through to
the end.
^ Touch "Main menu" or the # sensor.
^ Touch "Maintenance" y.
^ Touch "Descale the appliance".
The descaling process will begin.
When "Fill the water container with fresh
tap water up to the descaling symbol "
appears in the display:
^ Remove the water container and
rinse it carefully with clean water.
Make sure that no descaling agent is
left in the water container. Fill the
water container with fresh, clean tap
water up to the k symbol.
Also empty the waste container.
"Process finished" will appear in the
display to indicate that descaling has
been completed.
67
Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele.
,Warning. Do not open the outer casing of the machine.
Repairs may only be carried out by a suitably qualified and competent person
in strict accordance with national and local safety regulations. Repairs and
other work by unqualified persons can cause considerable danger to users.
The manufacturer cannot be held liable for unauthorised work.
If you cannot resolve the problem following these instructions please contact Miele
(see back cover for contact details).
Messages in the display
^ Follow the instructions to remedy the problem.
^ If after this, the fault message appears in the display again, contact Miele.
Message
Possible cause and remedy
Fault 1 - 4
80 - 83
There is a fault inside the machine.
^ Switch the coffee machine off with the On/Off sensor K.
Wait for one hour and then switch it back on again.
Fault 74, 77
Fault 225, 226
Fault 235, 236
There is a fault inside the machine.
^ Switch the coffee machine off with the On/Off sensor K.
Wait for approx. 2 minutes and then switch it back on
again.
68
Problem solving guide
Message
Possible cause and remedy
Fault 73
The brew unit cannot move into the correct position or it is
dirty and the ground coffee cannot be processed.
or
Try to remove the brew unit (see "Cleaning and care –
^
"Check brew unit"
Brew unit").
^ If you can, take it out and clean it (see "Cleaning and care
– Brew unit").
^ Push the coffee ejector of the brew unit into the correct
position (see illustration).
^ Replace the waste container and the water container in the
coffee machine. Do not replace the brew unit. Close the
front of the coffee machine and switch the coffee machine
on with the On/Off sensor K.
The brew unit motor will now be initialised.
^ When "Insert the brew unit" appears, open the front and
replace all the parts in the machine. Close the front.
If you cannot remove the brew unit:
^ Switch the coffee machine off with the On/Off sensor K.
Wait for approx. 2 minutes and then switch it back on
again.
Fault 227 to Fault
230,
Fault 233
There is a fault with the automatic spout adjustment.
^ Confirm the message with OK.
The automatic spout adjustment will be deactivated during
drink preparation whilst the machine remains switched on.
You can still make drinks.
69
Problem solving guide
Message
Possible cause and remedy
Fault 234
The cup protection cut-out has been triggered during the
making of three drinks since the coffee machine was
switched on. The cups or glasses being used have not been
clearly recognised by the automatic spout adjustment
function.
^ Use cups or glasses which can be recognised by the automatic spout adjustment function.
There is a fault with the automatic spout adjustment.
^ Switch the coffee machine off with the On/Off sensor K.
Wait for approx. 2 minutes and then switch it back on
again.
"Too much ground There is too much ready ground coffee in the ground coffee
coffee"
chute.
If more than one level spoon of ground coffee is added to the
coffee chute, the brew unit cannot process the coffee. The
ground coffee will be directed into the waste container and a
fault message will appear in the display.
^ Switch the coffee machine off with the On/Off sensor K.
^ Remove the brew unit and clean it (see "Cleaning and care
– Brew unit").
^ Remove the ground coffee in the interior of the coffee
machine e.g. using a vacuum cleaner.
^ Use the coffee spoon supplied for adding ground coffee.
Add one level spoon only to the ground coffee chute.
"Check water
intake"
The plumbed in water supply is not working.
^ Check whether the inlet hose has become kinked or the
stopcock is not fully open.
^ Remove the water container and empty it.
^ Push the water container into the machine so that it clicks
into position.
70
Problem solving guide
Message
Possible cause and remedy
"Push the water
The water container is not positioned correctly inside the
container in until it machine.
engages"
^ Remove the water container and replace it.
This fault message also appears if the water container was
not correctly filled and positioned for descaling.
^ Fill the water container with fresh tap water up to the F
symbol and start the descaling process again.
The plumbed in water supply is not working.
^ Check whether the inlet hose has become kinked or the
stopcock is not fully open.
71
Problem solving guide
Unusual performance of the coffee machine
Problem
Possible cause and remedy
When the coffee
machine is
switched on the
lighting does not
come on.
The lighting has been switched off.
^ Switch it back on (see "Settings - Lighting").
The display
remains dark
when the coffee
machine is
switched on using
the On/Off sensor
K.
The On/Off sensor K was not touched for long enough.
^ Touch the depression in middle of the On/Off sensor K for
at least 3 seconds.
The lighting is faulty.
^ Contact Miele.
The plug is not inserted in the socket correctly.
^ Insert the plug in the socket correctly and switch on.
The main fuse has tripped due to a problem with the coffee
machine, the electricity supply or another appliance.
^ Switch off at the wall socket and unplug it.
^ Contact a qualified electrician or Miele.
The coffee
The switching off time programmed using the timer has been
machine switches reached.
off suddenly.
^ If required, you can select a new switching off time (see
"Settings - Timer").
The plug is not inserted in the socket correctly.
^ Insert the plug in the socket correctly and switch on.
The coffee
machine is
switched on. The
lighting suddenly
switches off.
The lighting will switch itself off automatically after 10
minutes, if the coffee machine is not used for a certain length
of time.
The sensors do
not react to touch.
You cannot
operate the coffee
machine.
There is a fault inside the machine.
^ Open the front of the coffee machine.
72
The current process will be stopped.
^ Disconnect the machine from the power supply.
Problem solving guide
Problem
Possible cause and remedy
The coffee
machine does not
switch itself on,
although the
"Switch on at"
setting has been
activated for the
timer.
The system lock is activated.
^ Deactivate the system lock (see "Settings - System lock").
You cannot read
the display.
The display brightness has been set too low.
^ Adjust the brightness (see "Settings - Brightness")
After being
switched on, "Fill
and replace the
water container"
appears in the
display although
the water
container has
been filled and
inserted.
The machine does
not rinse.
The coffee machine needs to be descaled.
^ Switch the coffee machine off with the On/Off sensor K.
Wait for approx. one hour.
The day of the week has not been selected.
^ Check the timer settings and change these if necessary
(see "Settings - Timer").
The machine was not used after being switched on
automatically 3 times in succession (see "Settings - Timer").
^ Switch the machine on and make a drink.
^ Switch the coffee machine on again. As soon as
"Heating-up phase" appears in the display, touch the
"Maintenance" field at the bottom right and then select
"Descale".
^ Descale the coffee machine. You may need to repeat the
descaling process.
The milk pipework The milk pipework or the air intake tube is blocked.
is being rinsed
^ Follow the instructions in "Cleaning blockages from the
through but there
milk pipework".
is no rinse water
coming out of the
central spout. "Fill
and replace the
water container"
appears in the
display.
73
Problem solving guide
Problem
Possible cause and remedy
There is no milk or The milk pipework or the air intake tube is blocked.
milk froth being
^ Follow the instructions in "Cleaning blockages from the
dispensed from
milk pipework".
the central spout.
"Fill and insert milk The lid of the milk flask could be dirty preventing the sensors
flask" appears in
from working properly.
the display
^ Clean the milk flask and the lid thoroughly (see "Cleaning
although the milk
blockages from the milk pipework").
flask has been
filled and inserted
in the coffee
machine.
"Empty the drip
tray" appears in
the display
although the drip
tray has been
emptied.
The drip tray has not been correctly positioned inside the
machine.
^ Push the drip tray back in as far as it will go.
The sensors on the drip tray are not working properly.
^ Switch the coffee machine off with the On/Off sensor K.
The contact discs are dirty.
^ Clean and dry the contacts thoroughly (see "Cleaning and
care - Drip tray").
The machine front The containers are not pushed into the machine completely.
will not close
^ Check the containers.
properly.
The hinges are not aligned correctly.
^ Adjust the hinges (see "Installation - Adjusting the hinges").
74
Problem solving guide
Problem
Possible cause and remedy
Drink preparation
is cancelled.
If the water container becomes empty while a drink is being
made, after the water container is filled and replaced
"Continue? Yes / No" will appear in the display. If you do not
confirm "Yes" within 5 minutes, the drink will be cancelled.
The plumbed in water supply is not working.
^ Check whether the inlet hose has become kinked or the
stopcock is not fully open.
The water container became empty while a drink was being
made, however, "Mains water - On" is selected and the
coffee machine has not been plumbed in to the mains water
supply.
^ Check the setting for the mains water supply (see "Settings
- Mains water").
"Please wait"
appears
constantly in the
display. No drinks
can be made.
"Mains water - On" is probably selected and the coffee
machine has not been connected to the mains water supply.
^ Fill the water container.
The container
being used is not
recognised by the
automatic spout
adjustment
function
repeatedly. The
central spout
moves to the rim
of the container
and triggers the
cup protection
cut-out.
^ Use other containers which can be recognised by the
automatic spout adjustment function.
^ Then check the setting for the mains water supply (see
"Settings -Activating and deactivating the mains water
connection").
There is a fault with the automatic spout adjustment.
^ Switch the coffee machine off with the On/Off sensor K.
Wait for approx. 2 minutes and then switch it back on
again.
^ Use another cup or glass and make a drink.
^ If the cup protection cut-out is triggered again or the
central spout moves to the rim of the cup or glass again,
contact Miele.
75
Problem solving guide
Problem
Possible cause and remedy
The cup
protection cut-out
is not working.
The central spout
moves to the rim
of the cleaning
container and
becomes wedged
against the rim.
If the cleaning container is very close to or touching the rear
panel, the automatic spout adjustment will not detect it
properly.
^ Move the cleaning container slightly further forward.
76
Problem solving guide
Unsatisfactory results
Problem
Possible cause and remedy
The consistency of The temperature of the milk is too high. Cold milk (below
the milk froth in
13° C) gives the best results for milk froth.
unsatisfactory.
^ Check the temperature of the milk in the milk flask.
The milk pipework or the air intake tube is blocked.
^ Follow the instructions in "Cleaning blockages from the
milk pipework".
The coffee grinder The coffee bean container has become empty during the
makes a louder
grinding process.
noise than usual. ^ Fill the container with fresh beans.
There could be stones in amongst the coffee beans.
^ Switch the coffee machine off immediately. Contact Miele.
Espresso or coffee The coffee is too coarsely ground.
flows into the cup ^ Set the grinder on a finer setting (see "Grinder setting").
too quickly.
Espresso or coffee The coffee is too finely ground.
flows into the cup ^ Set the grinder on a coarser setting (see "Grinder setting").
too slowly.
The cup has not been pre-heated.
The coffee or
espresso is not hot
The brewing temperature has been set too low.
enough.
^ Set a higher brewing temperature (see "Brewing
temperature).
The filters in the brew unit are blocked.
^ Remove and clean the brew unit by hand (see "Cleaning
and care - Brew unit")
^ Degrease the brew unit (see "Cleaning and care - Brew
unit")
77
Problem solving guide
Problem
Possible cause and remedy
The crema on the The grinder setting is not correct.
coffee or espresso ^ Set the grinder on a finer or coarser setting (see "Grinder
is not as it should
setting").
be.
The brewing temperature is too high for this type of coffee.
^ Set a lower brewing temperature (see "Brewing
temperature").
The coffee beans are no longer fresh.
^ Add new coffee beans to the coffee bean container.
78
Cleaning blockages from the milk pipework
If you notice that the quality of the milk
froth is not satisfactory, this could be
caused by a blockage in the air intake
tube. Follow the instructions in "Step 2:
Cleaning the air intake tube and the
angled connector in the inside of the
machine front"
Step 1: Cleaning the milk
pipework in the lid of the milk
flask
If only steam instead of milk is coming
out of the central spout, follow the
instructions in Steps 1 to 3.
First check that the milk in the milk
flask has not gone sour as this can
block the milk pipework.
Follow the steps in the cleaning
procedure below to clean blocked milk
pipework. After cleaning, check that the
process for heating and frothing milk is
working well and that the quality of the
result is now satisfactory.
If the process for heating and frothing
milk is still not working well and the
quality of the result is still not
satisfactory, do not make any drinks
and repeat the steps as described.
^ Pull milk suction tube a out of the
milk flask lid.
Ensure that you also remove seal b
when doing this.
^ Clean both under running water.
Insert the cleaning brush supplied
into the stainless steel tube and move
it back and forth until all milk deposits
have been removed.
^ Also use the cleaning brush to clean
the milk pipework in the lid.
79
Cleaning blockages from the milk pipework
To reassemble the lid:.
^ First insert the seal in the lid. Then fit
the milk intake tube into the seal.
Make sure that you do not fit the
slanted end of the milk intake tube
into the seal.
Step 2: Cleaning the air intake
tube and the angled connector
in the inside of the machine
front
Do not use a needle or similar
implement. This would damage the
components.
^ First release air intake tube a from
opening c. Then pull off angled
connector b.
^ Pull both tubes out of the angled
connector.
^ Use the cleaning brush supplied to
clean air intake tube a. "Blowing
through" can also help to dislodge
blockages.
^ Clean the opening in the door for air
intake tube c.
^ Clean angled connector b under
running water. If necessary, replace it
with the spare part supplied.
^ Open the service panel on the inside
of the front of the coffee machine.
80
^ Insert the brush in milk tube d. Move
the brush back and forth as far as
possible until all milk deposits have
been removed.
Cleaning blockages from the milk pipework
^ Push the tubes back onto the angled
connector and replace this in the
machine.
^ Re-insert the air intake tube into
opening c.
Step 3: Maintaining the milk
valve and cleaning the milk
pipework in the central spout
^ Touch "Main menu" or the # sensor.
^ Touch "Maintenance" y.
^ Touch "Clean the central spout".
The central spout will move into the
maintenance position.
Important. You must remove the
cleaning brush before confirming
"Quit maintenance position" with
"OK". Otherwise the coffee machine
will be damaged.
^ Insert the brush in the milk valve.
Move the brush back and forth.
^ Remove and dismantle the
dispensing unit as described in
"Cleaning and care - Central spout".
^ Rinse all parts carefully under
running water.
Use the cleaning brush to clean all
parts carefully. In order to avoid
pushing out the silicone parts, do
not use a needle or similar
implement.
^ Reassemble the central unit and
replace it in the central spout.
^ Replace the cover.
^ Touch "OK".
The milk valve will move into the correct
position and the milk pipework will be
rinsed through.
81
After Sales / Guarantee
In the event of a fault which you cannot
correct yourself, or if the appliance is
under guarantee, please contact:
– your Miele Dealer
or
– Miele (see back cover for contact
details).
Please note that telephone calls may
be monitored and recorded for
training purposes (UK only).
When contacting your Dealer or Miele,
please quote the model and serial
number of your machine. These are
shown on the data plate inside the
machine.
N.B. A call-out charge will be applied
for service visits where the problem
could have been resolved as described
in these instructions.
Guarantee
For information on the appliance
guarantee specific to your country
please contact Miele. See back cover
for address.
In the U.K. your coffee machine is
guaranteed for 2 years from the date of
purchase. However, you must activate
your cover by calling 0845 365 6640 or
registering online at www.miele.co.uk.
82
Saving energy
Changing the following settings from
their factory default will increase the
energy consumption of the coffee
machine:
– Eco mode
– Lighting
– Time of day display
– Timer
When altering these settings, the
message "This setting increases energy
consumption" will appear in the display.
83
Plumbed in water connection
Notes on connecting to the
mains water supply
Connection to the mains water
supply should only be carried out by
a qualified and competent person.
Disconnect the coffee machine from
the mains electricity supply before
connecting it to the mains water
supply.
Close the stopcock before
connecting the water intake hose to
the machine.
The water quality must conform to
the requirements for drinking water
in the country the machine is being
installed in.
The coffee machine meets the
requirements of IEC 61770 and
EN 61770.
Connection to the household water
supply must comply with current
national and local safety regulations
in the country in which the coffee
machine is being installed.
All items used for connecting the
machine to the mains water supply
must comply with current national
and local safety regulations in the
country in which the machine is
being installed.
84
The machine is only suitable for
connection to a cold water supply,
which
– is connected directly to the fresh
water supply, to guarantee
circulation of water throughout the
system.
Avoid laying the water hose in such
a way that water can collect in it, as
this can affect the taste of the drinks.
– The machine is constructed to
comply with the relevant DIN standard and may be connected to the
mains drinking water supply without
a non-return valve if national
regulations permit.
– The water intake hose must be able
to sustain operating pressure.
– The water pressure (flow rate) must
be between 1 and 10 bar (105 and
106 Pa).
– The stainless steel hose supplied is
1.5 m long and must not be
lengthened.
– The water intake system must
comply with hygiene regulations.
– A stopcock must be provided
between the stainless steel hose and
the household water supply to
ensure that the water supply can be
cut off if necessary.
The stopcock should be easily
accessible after the machine has
been built in.
Plumbed in water connection
Connection to the water inlet
A faulty stainless steel hose must
only be replaced by a genuine Miele
replacement hose (available from
Miele). Make sure that the water
hose is suitable for food use.
Fitting the stainless steel hose
to the coffee machine
Make sure that the stainless steel
hose is not kinked or damaged. The
stainless steel hose must not be
shortened.
Before making plumbing
connections, ensure that the
machine is disconnected from the
mains electrical supply.
Connection to the water supply should
be carried out by a qualified plumber
and should incorporate a stopcock with
a 3/4" thread.
^ Check whether there is a washer. Fit
one, if not.
^ Remove the cover from the mains
water connection at the back of the
coffee machine.
^ Take the angled end of the stainless
steel hose and check whether there
is a washer. Fit one, if not.
^ Screw the coupling nut on the
stainless steel hose onto the
stopcock.
^ Ensure that all connections are
watertight.
^ Connect the stainless steel hose to
the stopcock.
Use the hose supplied with the
machine. Old or used hoses must
not be connected to the coffee
machine.
^ Ensure that it is screwed into position
correctly.
^ Turn on the stopcock slowly and
check for leaks. Correct the position
of the seal and union, if necessary.
Proceed with building in the coffee
machine (see "Installation").
85
Electrical connection U.K., ZA, IRL
All electrical work should be carried out
by a suitably qualified and competent
person only, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
Installation, repairs and other work by
unqualified persons could be
dangerous. The manufacturer cannot
be held liable for unauthorised work.
Ensure power is not supplied to the
machine until after installation work has
been carried out.
The voltage and frequency are given on
the data plate. Please ensure these
match the household mains supply. The
fuse rating is quoted on the plug.
Non-rewireable plugs BS 1363
The fuse cover must be refitted when
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
The machine is supplied with a mains
cable with moulded plug for connection
to a 230 - 240 V mains supply.
Do not connect the machine to an
inverter such as those used with an
autonomous energy source e.g. Solar
power.
Connection should be made via a fused
plug and suitable switched socket
which is easily accessible after
installation.
When switched on peak loads in the
system can cause the safety switch off
mechanism to be triggered. This can
damage the electronic unit.
Do not connect via an extension lead.
The machine must not be used with
so-called Energy saving devices
either. These reduce the amount of
energy supplied to the machine
causing it to overheat.
For extra safety it is advisable to protect
the appliance with a suitable residual
current device (RCD). Contact a
qualified electrician for advice.
If the socket is not accessible after
installation (depending on country) an
additional means of disconnection must
be provided for all poles.
WARNING: THIS APPLIANCE
MUST BE EARTHED
86
Installation
Building-in and combination options
The machine is designed for installation in a tall unit.
It can also be combined with other Miele built-in appliances. If the coffee machine
is to be built in above another appliance, there must be a full-width, closed shelf
between them (except when it is combined with a suitable Miele built-in plate or
food warming drawer).
Some Miele warming drawers can be connected directly to a socket at the rear of
the coffee machine using a special connection cable (available as an optional
accessory) so that it can be switched on and off at the same time as the coffee
machine.
Only a Miele plate or food warmer can be connected to the coffee machine:
EGW 4000-29, EGW 5000-14, ESW 6x14, ESW 6x29.
87
Installation
Ventilation
Ensure that the back of the coffee
machine is sufficiently ventilated so that
steam and warm air can dissipate
freely.
To align the machine front with the
furniture front ensure that there is a
sealing strip provided all the way
around the building-in niche or around
the coffee machine.
The ventilation gaps in the furniture
housing unit and the gap between
the top of the housing unit and the
ceiling must be at least 200 cm2.
Otherwise condensation can build up
and damage the machine or the
housing unit.
Installation
Before installation make sure that
there is no power supply to the
machine. This also applies should it
ever need to be taken out of its
housing unit.
The machine must be built in before
it is operated. It is designed for use
in ambient temperatures ranging
from +15 °C to +38 °C.
You will need two allen keys (size 3
and 5) for installing the machine.
88
^ If the housing unit niche is not fitted
with a sealing strip you should fit a
Miele sealing strip to the machine
before installing it. This is fitted from
the back of the machine.
This sealing strip is available to order
from Miele.
Installation
Tip: It is useful to have somewhere at
the height of the niche to place the
machine on. This makes electrical
connection and connection to the
plumbed in water supply easier.
^ Using the large allen key, unscrew all
four feet underneath the machine out
by approx. 2 mm.
The feet can be unscrewed by up to
approx. 10 mm.
^ Plumb the appliance into the mains
water supply (see "Plumbed in water
supply").
Four M5 hexagon socket screws are
supplied for aligning and securing the
machine in its niche.
^ Open the front of the machine and
partially tighten the side socket
screws.
^ Carefully turn lower socket screws to
centre the machine in the niche.
^ Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not overtighten them.
^ Connect the machine to the electrical
supply.
^ Push it all the way into the niche until
you feel resistance.
Take care not to damage the
electrical connection when pushing
the coffee machine into the niche.
^ Check the height of the machine to
make sure that it is sitting centrally in
the niche and that it is level. If this is
not the case, realign the machine
with using the four feet underneath.
89
Installation
Adjusting the hinges
If the machine front becomes difficult to
open or close after installation you can
adjust the hinges to realign it:
^ Turn screw a to align the front of the
machine so that it is flush with the
front of the housing unit.
^ Turn screw b to align the front of the
machine horizontally and vertically.
90
Copyright and licences
Miele uses software to operate and control the steam oven.
The copyright authorisation from Miele and other relevant software suppliers (e.g.
Adobe) must be respected.
Miele and their suppliers reserve any rights to the software components.
In particular the following are prohibited:
– Copying and distribution,
– Modifications and derivations,
– Decompilation, reverse engineering, disassembling and other such reductions
of the software.
This product contains Adobe® Flash® Player software under licence from Adobe
Systems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash are
registered trademarks of Adobe Systems Incorporated.
Components which fall under GNU General Public Licence and further Open
Source licences are integrated into the software.
An overview of the integrated Open Source components and a copy of the current
licence can be obtained at www.miele.com/device-software-licences. You will
need to enter the specific product name.
Miele will provide the source code for all components of software licensed under
the GNU General Public Licence and comparable Open Source licences.
For source code requests please email info|miele.com.
91
Alteration rights reserved / 2013
CVA 6805 (C)
M.-Nr. 09 549 930 / 00