Samsung HT-Q100 Instruction manual

2.1Ch Stylish Home
Theater System
HT-Q100
HT-Q100W
SAMSUNG ELECTRONICS AMERICA, INC.
SERVICE DIVISION
400 Valley Road, Suite 201
Mount Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864)
www.samsung.com
Instruction Manual
COMPACT
AH68-01851R
Downloaded From TheatreSystem-Manual.com Manuals
DIGITAL AUDIO
Safety Warnings
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE REAR COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
ENG
PREPARATION
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
Precautions
Note to CATV system installer :
This reminder is provided to call the CATV system
installer’s attention to Section 820~40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical
CLASS 1 LASER PRODUCT
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your
player horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4inches). Make sure the ventilation
slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may
become hot. Before moving the player, ensure the Disc Insert Hole is empty. This player is designed for continuous use. Switching off
the Home Theater to the stand-by mode does not disconnect the electrical supply. In order to disconnect the player completely from the
power supply, remove the main plug from the wall outlet, especially when left unused for a long period of time.
This Compact Disc player is classified as a CLASS 1
LASER product.
Use of controls, adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
CAUTION-INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED, AVOID
EXPOSURE TO BEAM.
During thunderstorms, disconnect AC main plug from the
wall outlet.
Voltage peaks due to lightning could damage the unit.
Do not expose the unit to direct sunlight or other heat
sources.
This could lead to overheating and malfunction of the unit.
This symbol indicates that dangerous voltage which can cause electric shock is present inside
this unit.
This symbol alerts you to important operating and maintenance instructions accompanying
the unit.
Phones
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
Downloaded From TheatreSystem-Manual.com Manuals
Protect the player from moisture(i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric fields
(i.e.speakers...). Disconnect the power cable from the AC supply if the
player malfunctions. Your player is not intended for industrial use.
Use of this product is for personal use only.
Condensation may occur if your player or disc has been stored in cold
temperatures.
If transporting the player during the winter, wait approximately 2 hours
until the unit has reached room temperature before using.
The batteries used with this product contain chemicals
that are harmful to the environment.
Do not dispose of batteries in the general household
trash.
2
Safety Instructions
RETAIN INSTRUCTIONS
The safety and operating instructions should be
retained for future reference.
HEED WARNINGS
All warnings on the appliance and in the operating
instructions should be adhered to.
FOLLOW INSTRUCTIONS
All operating and use instructions should be
followed.
WATER AND MOISTURE
Do not use this video product near waterfor example, near a bathtub, wash bowl,
kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, and the like.
OVERLOADING
Do not overload wall outlets and extension cords as
this can result in the risk of fire
or electric shock.
VENTILATION
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of the
video product and to protect it from overheating
these openings must not be blocked or covered.
The openings should never be blocked
by placing the video product on a bed, sofa, rug, or
other similar surface. This video product
should never be placed near or over a radiator or
heat register.
This video product should not be placed
in a built-in installation such as a bookcase
or rack unless proper ventilation is provided
or the manufacturer's instructions have been followed.
POWER CORD PROTECTION
Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them paying
particular attention to cords at plugs,
convenience receptacles, and the point where
they exit from the appliance.
3
Downloaded From TheatreSystem-Manual.com Manuals
CLEANING
Unplug this video product from the wall outlet
before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
LIGHTNING
For added protection of this video product
receiver during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the antenna or cable system.
This will prevent damage to the video product
due to lightning and power-line surges.
OBJECT AND LIQUID ENTRY
Never push objects of any kind into this
product through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the video
product.
ACCESSORIES
Do not place this video product on an unstable cart,
stand, tripod, bracket, or table.
The video product may fall, causing serious injury to
a child or adult, and serious damage
to the appliance.
Use only with a cart, stand, tripod, bracket,
or table recommended by the manufacturer,
or sold with the video product. Any mounting
of the appliance should follow the manufacturer's
instructions and should use a mounting accessory
recommended by the manufacturer.
CART
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
POWER SOURCES
This video product should be operated only from the
type of power source indicated
on the marking label. If you are not sure
of the type of supply to your home, consult your
appliance dealer or local power company.
For video products intended to be operated from battery power, or other sources, refer
to the operating instructions.
POWER LINES
An outside antenna system should not be located in
the vicinity of overhead power lines or other electric
light or power circuits,
or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with
them might be fatal.
POLARIZATION
This video product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other.) This plug will fit into the
power outlet only one way.
This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
OUTDOOR ANTENNA GROUNDING
•If an outside antenna is connected to the
antenna terminal, be sure the antenna system
is grounded so as to provide some protection
against voltage surges and built-up static
charges.
In
• the U.S.A section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984,
provides information with respect to proper
grounding of the mast and supporting
structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
See the figure below.
ATTACHMENTS
Do not use attachments not recommended
by the video product manufacturer as they may
cause hazards.
SERVICING
•Do not attempt to service this product yourself
as opening or removing covers may expose
you to dangerous voltage or other hazards.
Refer
all servicing to qualified service personnel.
•
REPLACEMENT PARTS
When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer or having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
ANTENNA
DISCHARGE UNIT
(NEC SECTION. 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
SAFETY CHECK
Upon completion of any service or repairs
to this video product, ask the service technician to
perform safety checks to determine that the video
product is in proper operating condition.
DAMAGE REQUIRING SERVICE
Unplug this video product from the wall outlet and
refer servicing to qualified service personnel under
the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have
fallen into the video product.
c. If the video product has been exposed to rain
or water
d. If the video product does not operate normally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions as an improper
adjustment of other controls may result
in damage and will often require extensive
work by a qualified technician to restore
the video product to its normal operation.
e. If the video product has been dropped
or the cabinet has been damaged.
f. When the video product exhibits a distinct
change in performance - this indicates
a need for service.
HEAT
This video unit should be situated away from heat
sources such as radiators, stoves, or other products
(including amplifiers) that produce heat.
4
PREPARATION
READ INSTRUCTIONS
All the safety and operating instructions should be
read before the appliance is operated.
ENG
Features
Contents
ENG
Multi-Disc Playback & FM Tuner
DVD-Audio compatible
Experience the super high-quality audio performance of DVD-Audio.
The on-board 24-bit/192kHz DAC enables this player to deliver exceptional sound quality in
terms of dynamic range, low-level resolution and high-frequency detail.
TV Screen Saver Function
The HT-Q100/HT-Q100W automatically brightens and darkens your TV screen
after 3 minutes in the stop mode.
The HT-Q100/HT-Q100W automatically switches itself into the power saving mode
after 20 minutes in the screen saver mode.
Power Saving Function
The HT-Q100/HT-Q100W automatically shuts itself off after 20 minutes in stop mode.
Customized TV Screen Display
The HT-Q100/HT-Q100W allows you to select your favorite image during JPEG and DVD
playback and set it as your background wallpaper.
HDMI
HDMI transmits DVD video and audio signals simultaneously, and provides a clearer picture.
AV SYNC Function
Video may lag behind the audio if the unit is connected to a digital TV.
To compensate for this, you can adjust the audio delay time to sync up with the video.
5
Downloaded From TheatreSystem-Manual.com Manuals
PREPARATION
SETUP
Safety Warnings .................................................................1
Precautions.........................................................................2
Safety Instructions ..............................................................3
Features .............................................................................5
Notes on Discs ...................................................................7
Description..........................................................................9
Setting the Language .........................................................43
Setting TV Screen type ......................................................45
Setting Parental Controls (Rating Level)............................47
Setting the Password .........................................................48
Setting the Wallpaper .........................................................49
DVD Playback Mode ..........................................................51
Setting the DRC (Dynamic Range Compression) ..............52
AV SYNC Setup .................................................................53
CONNECTIONS
Before Connecting the Speakers .......................................13
Installing the DVD player....................................................15
Connecting the Video Out to TV ........................................16
HDMI Function....................................................................17
Connecting External Components......................................19
Connecting the FM Antenna...............................................20
OPERATION
Before Using Your Home Theater ......................................21
Disc Playback .....................................................................24
MP3-CD Playback ..............................................................25
Displaying Disc Information................................................26
JPEG File Playback............................................................27
DivX Playback ....................................................................29
Checking the Remaining Time ...........................................31
Fast/Slow Playback ............................................................32
Skipping Scenes/Songs......................................................32
Repeat Playback ................................................................33
A-B Repeat Playback .........................................................34
Step Function .....................................................................35
Zoom (Screen Enlarge) Function .......................................36
EZ VIEW Function..............................................................36
Bonus Group / Navigating Pages.......................................37
Selecting Audio/Subtitle Language.....................................38
Playing Media Files using the USB HOST feature.............39
Moving Directly to a Scene/Song .......................................41
Using Disc Menu ................................................................42
Using the Title Menu...........................................................42
RADIO OPERATION
Listening to Radio...............................................................54
Presetting Stations .............................................................55
MISCELLANEOUS
Convenient Functions.........................................................57
Operating a TV with the Remote Control ...........................59
Before Calling for Service...................................................61
Cautions on Handling and Storing Discs............................63
Language Code List ...........................................................64
USB Host Feature Supported Products .............................65
Specifications .....................................................................66
6
PREPARATION
The HT-Q100/HT-Q100W combines the convenience of multi-disc playback capability,
including DVD-AUDIO, DVD-VIDEO, CD, MP3-CD, WMA-CD, DivX, CD-R/RW, and
DVD-R/RW, with a sophisticated FM tuner, all in a single player.
Notes on Discs
ENG
DVD (Digital Versatile Disc) offers fantastic audio and video, thanks to Dolby Digital sur-
1
~ 6
DVD players and the discs are coded by region. These regional codes must match in order
for the disc to play. If the codes do not match, the disc will not play.
The Region Number for this player is given on the rear panel of the player.
(Your DVD player will only play DVDs that are labeled with identical region codes.)
Mark (Logo)
Recorded Signals
Disc Size
Audio + Video
3 1/2"
COMPACT
Audio
AUDIO-CD
DIGITAL AUDIO
DivX
CD-R Discs
• Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc.
• Use a 650MB/74 minute CD-R disc.
Do not use CD-R disc over 700MB/80 minute as it may not be play back.
not be able to fully play the disc.
5"
DVD
This product does not support Secure (DRM) Media files.
• Some CD-RW (Rewritable) media, may not be playable.
• Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may
Playable Discs
Disc Type
Disc Recording Format
MPEG4
MP3
Max. Playing Time
Approx. 240 min. (single-sided)
Approx. 480 min. (double-sided)
Approx. 80 min. (single-sided)
Approx. 160 min. (double-sided)
5"
74 min.
3 1/2"
20 min.
5"
74 min.
3 1/2"
20 min.
CD-R MP3 Discs
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• MP3 file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate
(e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.
• A maximum of 500 tracks can be played per CD.
• A maximum of 300 folders can be played per CD.
Do not use the following types of disc!
• LD, CD-G, CD-I, CD-ROM and DVD-ROM discs cannot be played on this player.
•
If such discs are played, a "WRONG DISC FORMAT" message appears on the TV screen.
DVD discs purchased abroad may not play on this player.
If such discs are played, a "WRONG REGION CODE" message appears on the TV screen.
CD-R JPEG Discs
• Only files with the ".jpeg" and ".JPEG" extensions can be played.
• If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
• JPEG file names should be 8 characters or less in length and contain no blank spaces or special characters (. / = +).
• Only a consecutively written multisession disc can be played. If there is a blank segment in the multisession disc,
the disc can be played only up to the blank segment.
Copy Protection
• Many DVD discs are encoded with copy protection. Because of this, you should only connect
•
7
your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted
picture from copy-protected DVD discs.
This product incorporates copyright protection technology that is protected by methods claims of certain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Downloaded From TheatreSystem-Manual.com Manuals
• A maximum of 9,999 images can be stored on a single CD.
• When playing a Kodak/Fuji Picture CD, only the JPEG files in the picture folder can be played.
• Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.
CD-R/RW DivX Discs
• Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX file created by the
user might not be played.
• Software update for unsupported formats is not supported.
(Example: QPEL, GMC, resolution higher than 720 x 480 pixels, etc.)
• Sections with high frame rate might not be played while playing a DivX file.
• For more information about the formats authorized by DivX Networks, Inc., visit "www.divxnetworks.net".
8
PREPARATION
round sound and MPEG-2 video compression technology. Now you can enjoy these realistic
effects in the home, as if you were in a movie theater or concert hall.
Description
ENG
—Side Panel—
Eject button
Disc Insert Hole
Display
Power (
Video Output Connector
Connect the TV's video input jacks
(VIDEO IN) to the VIDEO OUT connector.
Function button
) button
Volume control
button
External Digital Optical
Input Connector
Use this to connect external equipment
capable of digital output.
Headphone Jack
External Audio
Input Connectors
Component Video Output
Connectors
USB Port
Connect a TV with component video
inputs to these jacks.
HDMI OUT Port
FM Antenna Connector
button
Play/Pause (
) button
Stop ( ) button
Tuning up & Skip (
) button
Tuning down & Skip (
) button
—Rear Panel—
2.1 Channel Speaker
Output Terminals
Cooling Fan
Accessories
Remote Control
(HT-Q100:AH59-01643J)
(HT-Q100W:AH59-01622L)
9
Downloaded From TheatreSystem-Manual.com Manuals
Video Cable
(AH39-40001V)
FM Antenna
(AH42-00017A)
User's Manual
(AH68-01851R)
10
PREPARATION
—Front Panel—
Description
ENG
PREPARATION
—Remote Control—
Insert Remote Batteries
TV button
DVD Receiver button
POWER button
DVD button
TUNER button
AUX button
USB button
1 Remove the battery
cover in the direction of
the arrow.
EJECT button
TV/VIDEO button
2
Insert two 1.5V AAA
batteries, paying attention to the correct
polarities (+ and –).
3
Replace the battery
cover.
Number(0~9) buttons
REMAIN button
STEP button
SEARCH buttons
CANCEL button
REPEAT button
Play/Pause button
Stop button
Tuning Preset/CD Skip button
VOLUME button
MENU button
TUNING/CH button
MUTE button
RETURN button
Caution
Follow these precautions to avoid leaking or cracking cells:
• Place batteries in the remote control so they match the polarity:(+) to (+)and (–)to (–).
• Use the correct type of batteries.Batteries that look similar may differ in voltage.
• Always replace both batteries at the same time.
• Do not expose batteries to heat or flame.
Cursor/Enter button
Range of Operation of the Remote Control
INFO button
SLIDE MODE button
DIGEST button
TUNER MEMORY button
SLEEP button
SLOW, MO/ST button
DIMMER button
11
Downloaded From TheatreSystem-Manual.com Manuals
AUDIO button
SUB TITLE button
V-SOUND/V-H/P button
ZOOM button
LOGO button
SD/HD button
The remote control can be used up to approximately 23 feet/7 meters in a straight line. It can also be
operated at a horizontal angle of up to 30° from the remote control sensor.
EZ VIEW button
HDMI AUDIO, SELECT button
12
Before Connecting the Speakers
ENG
Front Speaker (R)
Front Speaker (L)
CONNECTIONS
Subwoofer
Speaker Packages
Please confirm that all the following contents are included in the package.
Speaker Accessories
Connecting the Speakers
1
Front Speaker (2EA)
Front Stand (2EA)
Subwoofer Speaker
Press down the terminal
tab on the back of the
speaker.
Speaker Cable (3EA)
2
Insert the black wire into the
black terminal (–) and the red
wire into the red (+) terminal,
and then release the tab.
Black
Assembling the Speakers
3
Connect the connecting plugs to the back
of the Home Theater.
• Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
Red
or
Set the front speaker on the front stand.
Caution
To mount the speaker on the wall
• Do not let children play with or near the speakers.
Drive a screw into the wall for each speaker and
then hook the front speaker over them.
• When connecting the speaker wires to the speakers,
They could get hurt if a speaker falls.
13
Downloaded From TheatreSystem-Manual.com Manuals
Hook the speakers so
that the screws are in the
position of the figure.
make sure that the polarity (+/–) is correct.
Note
• If you place a speaker near your TV set,
screen color may be distorted because of
the magnetic field generated by the speaker. If this occurs, place the speaker away
from your TV set.
14
Installing the DVD player
Connecting the Video Out to TV
ENG
Choose one of the three methods for connecting to a TV.
1
Separate the rear cover(A).
2
Remove the 1 screw of the cover(B).
(A)
(B)
3
Put the speaker cable connected to the
Speaker OUT port into the left groove.
4
Put the cables connected to the Video OUT,
Component OUT and Audio IN ports into
the right groove.
METHOD2
METHOD 3
METHOD 1
(supplied)
TV
METHOD 1 Composite Video ....... (Good Quality)
5
6
Fasten the 1 screw on the cover(B).
- Connect the supplied video cable from the VIDEO OUT jack on the back panel of the system
to the VIDEO IN jack on your TV.
METHOD 2 Component ....... (Better Quality)
Close the rear cover(A).
- If your television is equipped with Component Video inputs, connect a component video cable
(not supplied) from the Pr, Pb and Y jacks on the side panel of the system to the corresponding
jacks on your TV.
METHOD 3 HDMI ....... (Best Quality)
- Connect the HDMI out to the HDMI input on your TV.
Note
• This product operates in Progressive scan mode(480p Only ) for Component Output.
• If the TV only supports a resolution of 576i(480i), the screen may be divided into 2 screens, or display nothing.
• After making the video connection, set the Video input source on your TV to match the corresponding Video output (HDMI, Component or Composite) on your Home theater. See your TV
owner's manual for more information on how to select the TV's Video Input source.
15
Downloaded From TheatreSystem-Manual.com Manuals
16
HDMI Function
ENG
What is HDMI (High Definition Multimedia Interface)?
Resolution Selection
This device transmits DVD video signal digitally without the process of converting to analog.
You can get sharper digital pictures by connecting the video to your TV using an HDMI connection cable.
• This function allows the user to select screen resolution for HDMI output.
• The audio signals transmitted over the HDMI Cable can be toggled
ON/OFF.
• Resolutions available for the HDMI output are 480P, 720P and 1080i.
• SD(Standard Definition) resolution is 480p and HD(High Definition) resolution is 720p/1080i.
Example: If the TV supports resolution up to 480p:
Press the HDMI AUDIO button on the remote control.
Press the SD/HD button.
• This toggles between “AUDIO ON” and “AUDIO OFF” on the display.
• AUDIO ON : Both video and audio signals are transmitted over the
• A 480p video signal is output through the HDMI output.
• If the TV does not support the configured resolution, you will not be able
•
HDMI connection cable, and audio is output is through your TV speakers only.
AUDIO OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
CONNECTIONS
HDMI Audio ON/OFF function
In Stop mode, press and hold the SD/HD (Standard
Definition/High Definition)button on the remote control.
to see the picture properly.
Note
• Since this product has an embedded Video Upscaler function with
Faroudja DCDi technology, it can enhance a 576i(480i) DVD resolution output to 480p/720p/1080i.
• You do not have to make separate adjustments, since the Home
Note
• The default setting value of this product is HDMI AUDIO OFF.
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• If you turn the unit off and on, or switch functions when the HDMI
AUDIO is set to ON, the HDMI AUDIO is automatically set to OFF.
Theater and TV will be automatically adjust themselves to the optimal resolution and aspect ratio if connected to HDMI. (If the TV is
an HDTV and has an HDMI Input jack, output is automatically converted to 1080i resolution (if supported by the TV).)
• For component video output, only 480P is supported.
• When both HDMI and COMPONENT jacks are connected, COMPONENT video is not displayed.
• See your TV owner's manual for more information on how to select
the TV's Video Input source.
17
Downloaded From TheatreSystem-Manual.com Manuals
18
Connecting External Components
Connecting the FM Antenna
ENG
Connecting an External Digital / Analog Component
Example: Digital signal components such as a Set-Top Box or CD Recorder.
Analog signal components such as a VCR.
CONNECTIONS
FM Antenna (supplied)
Audio Cable
Optical Cable
(not supplied)
(not supplied)
If the external analog component has only one Audio Out,
connect either left or right.
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.
1
Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2
Connect AUX (Audio) In on the Home Theater to Audio Out on the external analog component.
• Be sure to match connector colors.
3
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
Cooling Fan
The cooling fan supplies cool air to the unit to prevent overheating.
Press AUX on the remote control to select ‘D.IN / AUX’ input.
Please observe the following cautions for your safety.
• Each time the button is pressed, the selection changes as follows: D.IN ➝ AUX
• You can also use the FUNCTION button on the main unit.
• Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
• Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
The mode switches as follows: DVD ➝ D.IN ➝ AUX ➝ USB ➝ FM
Note
19
• You can connect the Video Output jack on your VCR to the TV, and connect the Audio
Output jacks on the VCR to this product.
Downloaded From TheatreSystem-Manual.com Manuals
newspaper or cloth, heat may build up inside the unit and fire may result.)
Notes
• This unit does not receive AM broadcasts.
20
Before Using Your Home Theater
ENG
Your Home Theater is capable of playing DVD, CD, MP3/WMA and JPEG discs.Depending on the disc you are
using, these instructions may vary slightly. Read the instructions carefully before using.
To Operate the TV and DVD Player with a Single Remote Control
2
Press TV button to set the
remote to TV mode.
4
Press TV/VIDEO button to
select VIDEO mode on
your TV.
5
Press DVD RECEIVER button to switch to DVD
RECEIVER mode.
3
Press the POWER button to
turn on your Samsung TV
with this remote.
6
Press FUNCTION button on
the main unit or DVD button
on the remote to enable
DVD/CD playback.
VIDEO
Note
• Buttons Enabled for TV Operation: POWER, CHANNEL, VOLUME, TV/VIDEO, and Numeric (0-9) buttons.
• By default, the remote control is set to work with Samsung TVs.
See page 59 for more information about remote control operation with other manufacturer's TVs.
21
Downloaded From TheatreSystem-Manual.com Manuals
22
OPERATION
1
Plug the main unit's power
cord into the AC power
supply.
Before Using Your Home Theater
Disc Playback
ENG
Disc terminology
Groups and tracks (DVD-AUDIO)
• DVD-audio is divided into several large sections called "groups" and
smaller sections called "tracks". Numbers are allotted to these sections.
These numbers are called "group numbers" and "track numbers".
GROUP 1
TRACK 1
TRACK 2
1
Load a disc vertically into the Disc Insert
Hole.
2
To eject the disc, press the EJECT button
• Insert a disc so that the label side faces forward.
GROUP 2
TRACK 3
TRACK 1
TRACK 2
Titles and chapters (DVD-VIDEO)
• DVD-video is divided into several large sections called "titles" and smaller
sections called "chapters". Numbers are allotted to these sections.
These numbers are called "title numbers" and "chapter numbers".
DVD
CHAPTER 2
TITLE 2
CHAPTER 3
CHAPTER 1
OPERATION
TITLE 1
CHAPTER 1
CD
• Playback starts automatically.
CHAPTER 2
Tracks (Video and music CDs)
• Video and music CDs are divided into sections called "tracks".
Numbers are allotted to these sections. These numbers are called
"track numbers".
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
Note
• Depending on the content of the disc, the initial screen may appear different.
Files (DivX)
• DivX is divided into sections called "files".
Caution
Numbers are allotted to these sections. These numbers are called
"file numbers".
FILE 1
Note
23
It may cause the disc to not read properly.
FILE 2
• In this manual, the instructions marked with "DVD (
DVD
)" are applicable
to DVD-VIDEO, DVD-AUDIO, and DVD-R/RW discs.
Where a particular DVD type is mentioned, it is indicated separately.
• Depending on the content of the disc, the initial screen may appear different.
Downloaded From TheatreSystem-Manual.com Manuals
• Avoid getting fingerprints on the writing surface of a disc.
24
MP3/WMA-CD Playback
Displaying Disc Information
Data CDs (CD-ROM, CD-R, CD-RW) encoded in MP3/WMA format can be played.
1
Load the MP3/WMA
disc.
• The MP3/WMA menu screen will appear
•
•
and playback will start.
The appearance of the menu depends on
the MP3/WMA disc.
WMA-DRM files cannot be played.
2
ENG
You can view disc playback information on the TV screen.
In Stop mode, use
to select
the album, and then
press the ENTER
button.
• Use
Press INFO button.
• Each time the button is pressed, the display changes as follows:
DVD
to select the track.
CD
MP3
DivX
DVD RECEIVER
JPEG
SMART NAVI
Something like you
Back for good
Love of my life
More than words
•
3
To change the album,
use
to
select another album
in Stop mode, and
then press the
ENTER button.
appears on the TV screen!
If this symbol appears on the TV screen while buttons are being operated,
that operation is not possible with the disc currently being played.
4
Press the STOP
button to stop
playback.
The information Display disappears from the screen
• Depending on the disc, the disc
repeat Steps 2 and 3 above.
• Depending on the recording mode, some MP3/WMA-CDs may not play.
• Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.
•
• What is a Group?
A section of tracks contained in a DVD-AUDIO disc.
• What is a Title?
Note
• To select another album and track,
Note
The information Display disappears from the screen
information display may appear different.
Depending on the disc, you can
also select DOLBY DIGITAL,
or PRO LOGIC.
A movie contained in a DVD-VIDEO disc.
• What is a Chapter?
Each title on a DVD disc is divided into several smaller sections called
"chapters".
• What is a Track (File)?
A section of video or a music file recorded on a DVD-AUDIO, CD, or MP3CD.
Screen Display
To play a file icon in the screen,
Press the
button when it is in stop
status and select a desired icon from the top
part of the menu.
• To play music files only, select the
• To view image files only, select the
• To view movie files only, select the
Icon.
• To select all files select the
25
Icon.
Icon.
Icon.
Downloaded From TheatreSystem-Manual.com Manuals
DVD display
• Music File Icon
• Image File Icon
• Movie File Icon
• All File Icon
CD display
DVD DVD-AUDIO display
AUDIO
TITLE display
GROUP display
CHAPTER display
TRACK (FILE) display
ELAPSED TIME display
STEREO (L/R) display
REPEAT PLAYBACK display
DOLBY DIGITAL display
AUDIO LANGUAGE display
ANGLE display
SUBTITLE display
26
OPERATION
The information Display disappears from the screen
JPEG File Playback
JPEG
Images captured with a digital camera or camcorder, or JPEG files on a PC can be stored on a CD and then
played back with this Home Theater.
ENG
Digest Function
You can view 9 JPEG images on the TV screen.
1
Slide Mode
Press DIGEST
button during
playback.
2
• JPEG files will be shown in
• The selected image is played for 5 seconds before moving
9 windows.
Load the JPEG disc.
2
Press SLIDE MODE button.
• Playback starts automatically.
• Each time the button is pressed, the image makes the transition as follows:
to the next image.
To view the previous or next image with 9 windows, press
.
OPERATION
1
Press Cursor , , , buttons
to select the desired image and
then press ENTER button.
Rotate/Flip Function
From top to bottom
Press Cursor
,
,
,
buttons during playback.
From bottom to top
Rectangular shape in the center
button: Flip Vertically
Vertical blinds effect
Each time a new image is displayed, slide modes
(1~11) will be applied randomly and automatically.
button: Rotate 90°
Counterclockwise
button: Rotate 90° Clockwise
Original Image
Cancels the slide mode.
button: Flip Horizontally
Press
to skip to the next slide.
Note
• The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for
standard JPEG files and 2048 x 1536 (or 3.0 MPixel) for progressive image files.
• Each time the button is pressed, the slide moves backward or forward.
27
Downloaded From TheatreSystem-Manual.com Manuals
28
DivX Playback
Subtitle Display
The functions on this page apply to DIVX disc playback.
Press the SUBTITLE button.
Skip Forward/Back
During playback, press the
button.
• Goes to the next file whenever you press
•
ENG
button, if there are over
2 files in the disk.
Goes to the previous file whenever you press
over 2 files in the disk.
button, if there are
• Each time you press the button, your selection will toggle between “SUBTITLE (1/1, 1/2 ...)” and “SUBTITLE OFF”.
• If the disc has only one subtitle file, it will be played automatically.
• Below for more details concerning Subtitle usage with DIVX discs.
Audio Display
Press the AUDIO button.
• If there are multiple audio tracks on a disc, you can toggle between them.
• Each time you press the button, your selection will toggle between “AUDIO (1/1, 1/2 ...)” and
Fast playback
To play back the disc at a faster speed,
press
or
during playback.
follows:
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
•"
”.
" is displayed when there is one supported language in the disc.
DivX(Digital internet video eXpress)
DivX is a video file format developed by Microsoft and is based on MPEG4 compression technology
to provide audio and video data over the Internet in real-time.
MPEG4 is used for video encoding and MP3 for audio encoding so that the users can watch a movie
at near DVD-quality video and audio.
1. Supported Formats
• This product only supports the following media formats.If both video and audio formats are not support-
5 Minute Skip function
During playback, press the
,
ed, the user may experience problems such as broken images or no sound.
●
button.
• Playback skips 5 minutes forward whenever you press
• Playback skips 5 minutes back whenever you press
Format
Supported Versions
button.
button.
●
Press ZOOM
button.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
• Each time you press the button,
your selection will toggle between
“ZOOM X2” and “ZOOM OFF”.
Note
29
• DIVX file can be zoomed only in ZOOM X2 mode.
• DivX files have .Avi file extensions, however, not all .Avi files are DivX
and may not be playable in this unit.
Downloaded From TheatreSystem-Manual.com Manuals
AVI
DivX3.11 ~ 5.1
WMV
V1/V2/V3/V7
Supported Audio Formats
Format
Bit Rate
Sampling Frequency
Zoom Function
1
Supported Video Formats
MP3
WMA
80~384kbps
56~128kbps
44.1khz
AC3
128~384kbps
44.1/48khz
• Aspect Ratio: Although default DivX resolution is 640*480 pixels (4:3), this product supports up to
720*480 pixels (16:9). TV screen resolutions higher than 800 will not be supported.
• When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback.
2. Caption Function
• You must have some experience with video extraction and editing in order to use this feature properly.
• To use the caption function, save the caption file (*.smi) in the same file name as that of the DivX
•
media file (*.avi) within the same folder.
Example. Root
Samsung_007CD1.avi
Samsung_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian characters (2 byte characters such as Korean and
Chinese) for the file name.
30
OPERATION
• Each time you press either button, the playback speed will change as
Note
“
Checking the Remaining Time
Fast/Slow Playback
Fast Playback
DVD
Press the REMAIN button.
• For checking the total and remaining time of a title or chapter
being played.
Press
CD
MP3
Slow Playback
.
Press SLOW button.
• Each time the button is pressed during playback,
the playback speed changes as follows:
TITLE ELAPSED
GROUP ELAPSED
TITLE REMAIN
GROUP REMAIN
CHAPTER ELAPSED
TRACK ELAPSED
CHAPTER REMAIN
TRACK REMAIN
the playback speed changes as follows:
DivX
Notes
• No sound is heard during slow play-
Note
• During fast playback of a CD or MP3-CD, sound is
heard only at 2x speed, and not at 4x, 8x, and 32x
speeds.
back and step motion playback.
• Reverse slow playback does not
work with DivX.
Skipping Scenes/Songs
CD
MP3
Press
.
• Each time the button is pressed briefly during playback, the previous or next chapter, track,
TRACK ELAPSED
TRACK REMAIN
TRACK REMAIN
TRACK ELAPSED
TOTAL ELAPSED
or directory (file) will be played.
• You cannot skip chapters consecutively.
DVD
TITLE 01/05 CHAPTER 002/040
TITLE 01/05 CHAPTER 004/040
TOTAL REMAIN
MP3
31
Downloaded From TheatreSystem-Manual.com Manuals
32
OPERATION
DVDAUDIO
• Each time the button is pressed during playback,
DVD
Each time the REMAIN button is pressed
DVDVIDEO
ENG
Repeat Playback
A-B Repeat Playback
Repeat playback allows you to repeatedly play a chapter, title, track (song), or directory (MP3 file).
DVD
CD
MP3
ENG
You can repeatedly play back a designated section of a DVD.
JPEG
DVD
Press REPEAT button.
• Each time the button is pressed during playback, the repeat playback mode changes as follows:
DVDVIDEO
DVDAUDIO
1
Press INFO button
twice.
3
Press Cursor , buttons
to select ‘A-’ and then press
ENTER button at the beginning
of the desired segment.
2
Press Cursor button
to move to REPEAT
PLAYBACK ( ) display.
4
Press ENTER
button at the end
of the desired
Repeat Playback Options
CHAPTER
Repeatedly plays the selected chapter.
TITLE
Repeatedly plays the selected title.
GROUP
Repeatedly plays the selected group.
JPEG
CD
TRACK
Repeatedly plays the selected track.
DIR
Repeatedly plays all tracks in the selected folder.
• When ENTER button is pressed,
the selected position will be stored
in memory.
To Select a Repeat Playback Mode in the Disc Information Screen
33
DVD
1
2
Press INFO button twice.
3
Press Cursor button to select the
desired Repeat Playback mode.
4
Press ENTER button.
played repeatedly.
A-
DISC
Repeatedly plays the entire disc.
OFF
Cancels Repeat Playback.
• The specified segment will be
A-B
REPEAT : A—B
A -?
REPEAT : A—
To return to normal playback, press Cursor
buttons to select
OFF.
,
Press Cursor button to move to
REPEAT PLAYBACK ( ) display.
Note
MP3 and JPEG discs, you cannot select Repeat
* For
Play from the information display screen.
Downloaded From TheatreSystem-Manual.com Manuals
CD
• The A-B Repeat function does not operate with MP3, CD or JPEG discs.
34
OPERATION
MP3
RANDOM
Plays tracks in random order.
(A track that has already been played may be
played again.)
Step Function
Zoom (Screen Enlarge) Function
DVD
This function allows you to enlarge a particular area of the displayed image.
ENG
DVD
Press STEP button.
• The picture moves forward one frame each time the button is pressed
1
during playback.
Note
• No sound is heard during slow playback and step motion
Press ZOOM button.
playback.
2
Press Cursor , ,
, buttons to
move to the area
you want to enlarge.
3
Press ENTER button.
• Each time the button is pressed, the
zoom level changes as follows:
SELECT ZOOM POSITION
Angle Function
DVD
This function allows you to view the same scene in different angles.
Press INFO button.
2
1/3
3
1/3
Press Cursor , or numeric buttons to
select the desired angle.
• Each time the button is pressed, the angle changes as follows:
1/3
Note
OPERATION
1
Press Cursor button to move to
ANGLE ( ) display.
• When a DivX disc is being played, only the 2:1 zoom-in is available.
EZ VIEW Function
DVD
Press EZ VIEW button.
• Each time the button is pressed, the zoom function will switch between On
and Off.
• When a movie is played in Widescreen format, black bars at the top and bottom of the TV screen can be removed by pressing the EZ VIEW button.
2/3
3/3
EZ VIEW
EZ VIEW OFF
Note
Note
• The Angle function works only with discs on which multiple
angles have been recorded.
35
Downloaded From TheatreSystem-Manual.com Manuals
• This function will not work if the DVD is recorded with multi-camera angle format.
• Black bars may not disappear because some DVD discs have a built-in horizontal to vertical ratio.
• This feature is not supported for DivX discs.
36
Bonus Group / Navigating Pages
Bonus Group
Selecting Audio/Subtitle Language
Audio Language Selection Function
DVDAUDIO
Some DVD-Audio discs have an extra ‘bonus’ group that requires a 4-digit key
number to access. See the disc packaging for details and the-key number.
1
Press INFO button
twice.
When you play a DVD-Audio disc that has a
bonus group, the key number input screen
appears automatically.
2
ENG
DVD
Press Cursor ,
buttons or numeric buttons to select the
desired audio language.
• Depending on the number of languages on
a DVD disc, a different audio language
(ENGLISH, SPANISH, FRENCH, etc.) is
selected each time the button is pressed.
SP 2/3
FR 3/3
BONUS GROUP
OPERATION
KEY NUMBER :
Subtitle Language Selection Function
Note
• If you eject the disc, switch the power off, or unplug the player, you will need to re-enter
1
Press INFO button
twice.
3
Press Cursor
button or numeric
buttons to select
the desired subtitle.
2
the key number.
Navigating Pages
DVD
Press Cursor
button to move to
SUBTITLE ( )
display.
DVDAUDIO
During playback, press the TUNING/CH button
on the remote control.
• You can select the desired image from a DVD-Audio disc containing still images.
• With some discs, you may not be able to select images.
EN 1/3
EN 01/ 03
SP 02/ 03
OFF
Note
• To operate this function, you can also
•
press the Select AUDIO or Select SUBTITLE buttons on the remote control.
Depending on the disc, the Subtitle
and Audio Language functions may
not be available.
FR 03/ 03
OFF / 03
37
Downloaded From TheatreSystem-Manual.com Manuals
38
Playing Media Files using the USB HOST feature
ENG
You can enjoy media files such as pictures, movies and music saved in an MP3 player, USB memory or digital camera in high
quality video with 5.1 channel home theater sound by connecting the storage device to the USB port of the home theater.
1
Connect the USB
device to the USB
port on the side of
the unit.
2
Compatible Devices
1. USB devices that support USB Mass Storage v1.0.
(USB devices that operate as a removable disk in Windows
(2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disk in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
Press the FUNCTION
button on the main
unit or the USB button
on the remote control
to select the USB
mode.
• “USB” appears on the display screen
and then disappears.
• USB MENU screen appears on the TV
screen and the saved file is played.
●
Still Picture
) button.
Music
Safe USB Removal
Movie
To prevent damage to the memory stored in the USB device, perform safe removal
before disconnecting the USB cable.
File name
File
extension
Bit rate
Version
Pixel
Sampling
Frequency
JPG
JPG .JPEG
–
–
640*480
–
MP3
.MP3
80~384kbps
–
–
44.1kHz
WMA
.WMA
56~128kbps
V8
–
44.1kHz
WMV
.WMV
4Mbps
V1,V2,V3,V7
720*480
44.1KHz~48KHz
DivX
.AVI,.ASF
4Mbps
DivX3.11~DivX5.1,Xvid
720*480
44.1KHz~48KHz
(1) Press the Stop button twice in a row.
The display will show REMOVE ➞ USB.
• CBI (Control/Bulk/Interrupt) is not supported.
(2) Remove the USB cable.
• Digital Cameras that use PTP protocol or require additional program installation
when connected to a PC are not supported.
• A device using NTFS file system is not supported.
(Only FAT 16/32 (File Allocation Table 16/32) file system is supported.)
Skip Forward/Back
During playback, press the
• When there is more than one file, when you press the
• When there is more than one file, when you press the
button.
button, the next file is selected.
button, the previous file is selected.
Fast playback
To play back the disc at a faster speed, press
• Some MP3 players, when connected to this product,may not operate depending
on the sector size of their file system.
• The USB HOST function is not supported if a product that transfers media files by
its manufacturer-specific program is connected.
• Does not operate with Janus enabled MTP(Media Transfer Protocol) devices.
or
• Each time you press either button, the playback speed will change as follows:
during playback.
• The USB host function of this product does not support all USB devices.
For information on the supported devices, see pages 65.
2x ➞ 4x ➞ 8x ➞ 32x ➞ Normal.
39
Downloaded From TheatreSystem-Manual.com Manuals
40
OPERATION
To stop playback, press the STOP (
Supported Formats
Moving Directly to a Scene/Song
Using Disc Menu
ENG
DVD
You can use the menus for the audio language, subtitle language, profile, etc.
DVD menu contents differ from disc to disc.
DVD
1
CD
Moving to a Title/Track
2
Press INFO button.
01/05
001/040
0:00:37
1/1
Press Cursor , buttons
or numeric buttons to select
the desired title/track and then
press ENTER button.
03/05
001/002
0:00:01
Moving to a Chapter
Press Cursor ,
buttons to move to
Chapter ( ) display.
3
1
In Stop mode,
press MENU
button.
• When you select Disc Menu and it is not
1/1
01/05
001/040
0:00:01
Press Cursor , buttons or numeric buttons to
select the desired chapter
and then press ENTER button.
01/05
025/040
0:00:01
5
1/1
Press Cursor ,
buttons to move to
time display.
01/05
025/040
1:17:30
Press Cursor ,
, buttons to
select the desired
item.
• Press ENTER button.
1/1
ENTER
MOVE
EXIT
ENTER
EXIT
Moving to a Specific Time
6
Press the numeric
buttons to select the
desired time and then
press ENTER button.
1/1
01/05
028/040
1:30:00
1/1
OPERATION
4
Moving to a Specific Time
3
supported by the disc, the "This menu is not supported" message appears on the screen.
MOVE
Moving to a Chapter
2
Press Cursor ,
buttons to move to
‘DISC MENU’ and then
press ENTER button.
• Disc menu display may be different depending on the disc.
Note
Using the Title Menu
DVD
For DVDs containing multiple titles, you can view the title of each movie.
Depending on the disc, the availability of this feature may vary.
MP3
1
JPEG
Press the numeric
buttons.
• The selected file will be played.
• When playing an MP3 or JPEG disc, you
cannot use
,
to move to a folder.
To move a folder, press (Stop) and
then press
, .
Note
In Stop mode,
press MENU button.
2
Press Cursor ,
button to move to
‘Title Menu’.
• You can press
•
3
Press ENTER button.
• The title menu appears.
on the
remote control to move directly to the
desired title, chapter, or track.
Depending on the disc, you may not
be able to move to the selected title
or time.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
Press MENU button to exit the setup screen.
41
Downloaded From TheatreSystem-Manual.com Manuals
Note
• Title menu display may be different depending on the disc.
42
Setting the Language
ENG
OSD (On-Screen Display) language is set to English by default.
In Stop mode,
press MENU
button.
1
2
Press Cursor button to move to
‘Setup’ and then
press ENTER button.
3
Select ‘Language’
and then press
ENTER button
4
Press Cursor ,
button to select ‘OSD
Language’ and then
press ENTER button.
5
Press Cursor , button to select the desired
language and then press
ENTER button.
• Once the setup is complete, the OSD will be
English if English has been selected as language.
MOVE
ENTER
EXIT
MOVE
ENTER
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Press MENU button to exit the setup screen.
Note
• To select another language, select OTHER and enter the language code of your country.
(See page 64 for language codes)
AUDIO, SUB TITLE and DISC MENU language can be selected.
MOVE
ENTER
RETURN
Selecting the
OSD Language
MOVE
43
SELECT
Downloaded From TheatreSystem-Manual.com Manuals
RETURN
EXIT
EXIT
MOVE
ENTER
RETURN
EXIT
Selecting the
Audio Language (recorded on the disc)
MOVE
ENTER
RETURN
EXIT
Selecting the
Subtitle Language
(recorded on the disc)
MOVE
ENTER
RETURN
EXIT
Selecting the Disc Menu
Language (recorded on the disc)
language you selected is
* Ifnottherecorded
on the disc, menu
language will not change even
if you set it to your desired
language.
44
SETUP
Press RETURN button to return to the previous level.
Setting TV Screen type
ENG
Depending on your TV type (Wide Screen or conventional 4:3), you can select the TV's aspect ratio.
In Stop mode,
press MENU
button.
1
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
Adjusting the TV Aspect Ratio (Screen Size)
The horizontal to vertical screen size ratio of conventional TVs is 4:3, while that of widescreen and high
definition TVs is 16:9. This ratio is called the aspect ratio. When playing DVDs recorded in different
screen sizes, you should adjust the aspect ratio to fit your TV or monitor.
• For a standard TV, select either "4:3LB" or "4:3PS" option according to personal preference.
Select "16:9" if you have a widescreen TV.
WIDE
MOVE
3
ENTER
MOVE
EXIT
Press Cursor button to move to ‘TV
DISPLAY’ and then
press ENTER button.
4
ENTER
• You can enjoy the widescreen aspect.
EXIT
Press Cursor ,
button to select the
desired item and then
press ENTER button.
• Once the setup is complete, you will
4:3LB
(4:3 Letterbox)
4:3PS
(4:3 Pan&Scan)
EXIT
MOVE
SELECT
RETURN
EXIT
SETUP
RETURN
: Select this to play a 16:9 picture in the pan & scan
mode on a conventional TV.
• You can see the central portion of the screen only (with the
sides of the 16:9 picture cut off).
Note
ENTER
: Select this to play a 16:9 picture in the letter box
mode on a conventional TV.
• Black bars will appear at the top and bottom of the screen.
be taken to the previous screen.
MOVE
: Select this to view a 16:9 picture in the full-screen
mode on your widescreen TV.
• If a DVD is in the 4:3 ratio, you cannot view it in widescreen.
• Since DVD discs are recorded in various image formats, they will look different depending on
the software, the type of TV, and the TV aspect ratio setting.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
45
Downloaded From TheatreSystem-Manual.com Manuals
46
Setting Parental Controls (Rating Level)
Use this to restrict playback of adult or violent DVDs you do not want children to view.
1
In Stop mode,
press MENU
button.
2
Setting the Password
You can set the password for the Parental (rating level) setting.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
1
Press MENU button.
MOVE
MOVE
3
4
Press Cursor , button to select the desired
rating level and then press
ENTER button.
• If you have selected Level 6, you can•
MOVE
EXIT
not view DVDs with Level 7 or higher.
The higher the level, the closer the
content is to violent or adult material.
EXIT
ENTER
3
5
Enter the password
and then press
ENTER button.
Press Cursor button to
move to ‘PASSWORD’
and then press ENTER
button.
Note
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
Enter the password
and then press
ENTER button.
• The password is set to "7890" by default.
• Once the setup is complete, you will be
taken to the previous screen.
INPUT NUMBER
RETURN
• This function works only if a DVD disc contains the rating level information.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Downloaded From TheatreSystem-Manual.com Manuals
EXIT
word, and confirm new password.
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
EXIT
INPUT NUMBER
RETURN
EXIT
• The password is set to "7890" by default.
EXIT
If you have forgotten the rating level password, do the following:
• While the player is in the no disc mode, hold the main unit's
47
5
Press ENTER
button.
ENTER
• The setting is complete.
Note
ENTER
MOVE
EXIT
ENTER
• Enter the old password, a new pass-
MOVE
MOVE
4
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
SETUP
Press Cursor
button to move to
‘PARENTAL’ and then
press ENTER button.
ENTER
ENG
on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
button for longer than 5 seconds. “INITIALIZE” appears
48
Setting the Wallpaper
JPEG
ENG
DVD
While watching a DVD or JPEG CD, you can set the image you like as background wallpaper.
Setting the Wallpaper
1
During playback, press
PLAY/PAUSE button
when an image you
like appears.
To select one of the 3 wallpaper settings you've made
Press LOGO
button.
2
1
In Stop mode,
press MENU
button.
2
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
3
Press Cursor
button to move to
‘LOGO’ and then
press ENTER button.
• “COPY LOGO DATA” will be displayed on the TV screen.
COPY LOGO DATA
PAUSE
MOVE
3
•
Press to select
the desired ‘USER’,
and then press
ENTER.
5
ENTER
EXIT
MOVE
ENTER
RETURN
EXIT
Press MENU
button to exit the
setup screen.
• This selects one of the 3 wallpaper screens
The selected wallpaper will be
displayed.
You can select up to 3 wallpaper
settings.
SETUP
•
4
The power will
turn off and then
back on.
MOVE
EXIT
ENTER
MOVE
SELECT
RETURN
EXIT
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
MOVE
SELECT
RETURN
EXIT
Select this to set the
Samsung Logo image as
your wallpaper.
49
Downloaded From TheatreSystem-Manual.com Manuals
MOVE
SELECT
RETURN
EXIT
Select this to set the desired
image as your wallpaper.
50
DVD Playback Mode
Setting the DRC (Dynamic Range Compression)
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1
Press the EJECT
button and then
press the MENU
button.
MOVE
2
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
Press Cursor
button to move to
‘Setup’ and then
press ENTER button.
MOVE
EXIT
ENTER
1
In Stop or no disc
mode, press
MENU button.
3
4
Press Cursor ,
button to move to
‘DVD VIDEO’ and then
press ENTER button.
3
ENTER
Press Cursor
button to move to
‘DRC’ and then
press ENTER
button.
EXIT
MOVE
SELECT
RETURN
button is pressed,
the effect is greater, and when the
Cursor button is pressed, the effect is
smaller.
MOVE
ENTER
RETURN
EXIT
CHANGE
RETURN
EXIT
• DVD VIDEO : set to play the DVD video
• DVD Play mode is set to DVD Audio as
factory default setting.
• Powering off the main unit will automatically
switch to the DVD Audio mode.
•
contents contained on a DVD
audio disc.
DVD AUDIO : set to play the default DVD
audio.
Press RETURN button to return to the previous level.
DivX (R) registration
• Please use the Registration code to register
this player with the DivX (R) video on demand
format. To learn more, go to www.divx.com/vod.
51
Press Cursor
, to adjust
the ‘DRC’.
EXIT
When Selecting DVD Play Mode:
Note
EXIT
MOVE
Downloaded From TheatreSystem-Manual.com Manuals
ENTER
RETURN
EXIT
Press MENU button to exit the setup screen.
52
SETUP
RETURN
4
ENTER
• When the Cursor
switch to DVD AUDIO Play mode.
ENTER
MOVE
EXIT
• Set steps 1 ~ 4 again if you want to
MOVE
2
Press Cursor
button to move to
‘Audio’ and then
press ENTER
button.
EXIT
ENTER
MOVE
Press Cursor
button to move to
‘DVD TYPE’ and then
press ENTER button.
ENG
AV SYNC Setup
Listening to Radio
ENG
Video may look slower than the audio if it is connected to a digital TV.
If this occurs, adjust the audio delay time to to match the video.
1
Press the MENU button.
2
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
• Setup menu appears.
Remote Control Unit
Press the TUNER
button to select the
FM band.
1
2
Tune in to the
desired station.
Automatic Tuning 1
Automatic Tuning 2
MOVE
ENTER
MOVE
EXIT
ENTER
EXIT
Manual Tuning
When
is pressed, a
preset broadcast station is
selected.
Press and hold TUNING/CH to
automatically search for active
broadcasting stations.
Briefly press TUNING/CH to
increase or decrease the
frequency incrementally.
Main Unit
3
Press Cursor ,
buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
4
Press Cursor
, buttons
to select the AV-SYNC Delay
Time and then press the
ENTER button.
1
Press the Function
button to select the
FM band.
• You can set the audio delay time between 0 ms
2
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
and 300 ms. Set it to the optimal status.
Automatic Tuning 1
MOVE
ENTER
RETURN
EXIT
MOVE
SELECT
RETURN
Press STOP ( ) to select
MANUAL and then briefly
press
to tune in to a lower or
higher frequency.
EXIT
Press RETURN button to return to the previous level.
Manual Tuning
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Press MENU button to exit the setup screen.
53
Downloaded From TheatreSystem-Manual.com Manuals
• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
• In a poor reception area, select MONO for a clear, interference-free broadcast.
54
RADIO OPERATION
Press the STOP ( )
button to selec "MANUAL"
and then press and hold
button to automatically search the band.
Automatic Tuning 2
Presetting Stations
ENG
Example: Presetting FM 89.1 in the memory
1
Press the TUNER button to
select the FM band.
2
Press TUNING/CH to
select "89.10".
• Refer to Step 2 on page 54 to automatically
3
Press the TUNER
MEMORY button.
• “1” flashes in the display.
or manually tune in to a station.
4
Press
to select
preset number.
• You can select between 1 and 15 presets.
5
Press the TUNER MEMORY
button again.
6
To preset another station,
repeat steps 2 to 5.
• Press the TUNER MEMORY button before
‘number’ disappears from the display.
• ‘number’ disappears from the display and the
station is stored in memory.
RADIO OPERATION
Note
• This unit does not receive AM broadcasts.
To tune in to a preset station, press
remote control to select a channel.
55
Downloaded From TheatreSystem-Manual.com Manuals
on the
56
Convenient Functions
Sleep Timer Function
You can set the time that the Home Theater will shut itself off.
Press SLEEP button.
•"
" will be displayed. Each time the button is pressed, the preset
time changes as follows: 10 ➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
ENG
V-SOUND(Virtual Sound)
The 2-channel sounds can be listened with virtual effects for producing much more realistic sounds as in 5.1 channels.
Press V-SOUND button.
• Each time the button is pressed, the selection changes as follows:
VIRTUAL SOUND ONE ➞ VIRTUAL SOUND TWO ➞ VIRTUAL
SOUND OFF.
To confirm the sleep timer setting, press SLEEP button.
•The remaining time before the Home Theater will shut itself off is displayed.
•Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press SLEEP button until
OFF appears on the display.
Adjusting Display Brightness
Virtual Headphone Function
Use headphones (not supplied) for private listening pleasure.
You can enjoy dynamic sound effects similar to that of 5.1 channel surround sound using
conventional stereo headphones.
1
Plug the headphones into the
headphone jack.
• You can purchase headphones from most Electronics stores.
You can adjust the brightness of the display on the main unit so it won't interfere
with your movie viewing.
Press DIMMER button.
• Each time the button is pressed, the brightness changes as follows:
DARK ➞ BRIGHT.
Mute Function
This is useful when answering a doorbell or telephone call.
appears in the display.
•
• To restore the sound, press the button again.
Press V-H/P button.
• Each time the button is pressed, the selection alternates between
V.HP and OFF.
• V.HP(VIRTUAL HEADPHONE ON) : Select to enjoy a 5.1-channel
•
surround sound that gives the feeling of being in a baseball park or
concert hall.
OFF(VIRTUAL HEADPHONE OFF) : Select to listen to a standard
2-channel stereo sound.
Note
MISCELLANEOUS
Press MUTE button.
2
• Do not listen at extremely high volume levels when using headphones.
Extended, high-volume listening can lead to permanent hearing loss.
57
Downloaded From TheatreSystem-Manual.com Manuals
58
Operating a TV with the Remote Control
ENG
TV Brand Code List
When operating a TV with the remote control
1
2
3
4
Press TV button to select TV mode.
Press POWER button to turn on the TV.
Point the remote control toward the TV.
While holding down POWER, enter the code
corresponding to your brand of TV.
• If the code matches the TV's code, the TV will be turned off.
• If there is more than one code listed for your TV in the table,
enter one at a time to determine which code works.
Example: For a Samsung TV
While holding down POWER, use the number buttons to enter 00,
15, 16, 17 and 40.
5
Point the remote control toward the TV
and press POWER. If the TV turns off or
on, the setting is complete.
buttons (0~9).
Note
• The remote control may not work on some brands of TVs. Also, some operations may not
•
59
be possible depending on your brand of TV.
If you do not set the remote control with the code for your brand of TV, the remote control
will work on a Samsung TV by default.
Downloaded From TheatreSystem-Manual.com Manuals
Brand
Code
No.
Brand
1
Admiral (M.Wards)
56, 57, 58
44
MTC
18
2
A Mark
01, 15
45
NEC
18, 19, 20, 40, 59, 60
3
Anam
01, 02, 03, 04, 05, 06, 07, 08, 09, 10,
46
Nikei
03
11, 12, 13, 14
47
Onking
03
Code
4
AOC
01, 18, 40, 148
48
Onwa
03
5
Bell & Howell (M.Wards)
57, 58, 81
49
Panasonic
06, 07, 08, 09, 54, 66, 67, 73, 74
6
Brocsonic
59, 60
50
Penney
18
7
Candle
18
51
Philco
03, 15, 17, 18, 48, 54, 59, 62, 69, 90
8
Cetronic
03
52
Philips
15, 17, 18, 40, 48, 54, 62, 72
9
Citizen
03, 18, 25
53
Pioneer
63, 66, 80, 91
10
Cinema
97
54
Portland
15, 18, 59
11
Classic
03
55
Proton
40
12
Concerto
18
56
Quasar
06, 66, 67
13
Contec
46
57
Radio Shack
17, 48, 56, 60, 61, 75
14
Coronado
15
58
RCA/Proscan
18, 59, 67, 76, 77, 78, 92, 93, 94
15
Craig
03, 05, 61, 82, 83, 84
59
Realistic
03, 19
16
Croslex
62
60
Sampo
40
17
Crown
03
61
Samsung
00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98
18
Curtis Mates
59, 61, 63
19
CXC
03
62
Sanyo
19, 61, 65
20
Daewoo
02, 03, 04, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 28, 29,
63
Scott
03, 40, 60, 61
30, 32, 34, 35, 36, 48, 59, 90
64
Sears
15, 18, 19
21
Daytron
40
65
Sharp
15, 57, 64
22
Dynasty
03
66
Signature 2000 (M.Wards)
57, 58
23
Emerson
03, 15, 40, 46, 59, 61, 64, 82, 83, 84, 85
67
Sony
50, 51, 52, 53, 55
24
Fisher
19, 65
68
Soundesign
03, 40
25
Funai
03
69
Spectricon
01
26
Futuretech
03
70
SSS
18
27
General Electric (GE)
06, 40, 56, 59, 66, 67, 68
71
Sylvania
18, 40, 48, 54, 59, 60, 62
28
Hall Mark
40
72
Symphonic
61, 95, 96
29
Hitachi
15, 18, 50, 59, 69
73
Tatung
06
30
Inkel
45
74
Techwood
18
31
JC Penny
56, 59, 67, 86
75
Teknika
03, 15, 18, 25
32
JVC
70
76
TMK
18, 40
33
KTV
59, 61, 87, 88
77
Toshiba
19, 57, 63, 71
34
KEC
03, 15, 40
78
Vidtech
18
35
KMC
15
79
Videch
59, 60, 69
36
LG (Goldstar)
01, 15, 16, 17, 37, 38, 39, 40, 41, 42, 43, 44
80
Wards
15, 17, 18, 40, 48, 54, 60, 64
37
38
Luxman
18
81
Yamaha
18
LXI (Sears)
19, 54, 56, 59, 60, 62, 63, 65, 71
82
York
40
39
Magnavox
15, 17, 18, 48, 54, 59, 60, 62, 72, 89
83
Yupiteru
03
40
Marantz
40, 54
84
Zenith
58, 79
41
Matsui
54
85
Zonda
01
42
MGA
18, 40
86
Dongyang
03, 54
43
Mitsubishi/MGA
18, 40, 59, 60, 75
MISCELLANEOUS
• You can use the TV POWER, VOLUME, CHANNEL, and Numeric
No.
60
Before Calling for Service
ENG
Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or
if the instruction below does not help, turn off the unit, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Center.
Symptom
I cannot eject the disc.
Playback does not start.
Check/Remedy
Audio language and subtitles do not work.
• Audio language and subtitles will not work for DVDs not contain-
• Check the region number of the DVD.
Menu screen does not appear even
when the menu function is selected.
• Are you using a disc that does not contain menus?
•
DVD discs purchased from abroad may not be playable.
CD-ROMs and DVD-ROMs cannot be played on this Home
Theater.
Make sure that the rating level is correct.
• Are you using a deformed disc or a disc with scratches on
•
the surface?
Wipe the disc clean.
• No sound is heard during fast playback, slow playback, and step
Sound is not produced.
motion playback.
• Are the speakers connected properly? Is the speaker setup cor•
• Disc is rotating but no picture is produced.
• Picture quality is poor and
picture is shaking.
Check/Remedy
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
•
Playback does not start
immediately when the
Play/Pause button is
pressed.
Symptom
rectly customized?
Is the disc severely damaged?
• Is the TV power on?
• Are the video cables connected properly?
• Is the disc dirty or damaged?
• A poorly manufactured disc may not be playable.
ing them. And depending on the disc, they may work differently.
Aspect ratio cannot be
changed.
• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX
Can't receive radio broadcast.
•The main unit is not working.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external
(Example: The power goes out or
strange noise is heard.)
• The Home Theater is not
working normally.
mode, or 4:3 PAN SCAN mode, but 4:3 DVDs can be seen in 4:3
ratio only. Refer to the DVD disc jacket and then select the
appropriate function.
FM antenna in an area with good reception.
• Turn off the power and hold the
button on the main unit for
longer than 5 seconds.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• While “NO DISC” message appears on the display of main unit, hold
The password for rating
level has been forgotten.
the main unit's
button for longer than 5 seconds. “INITIALIZE”
appears on the display and all settings will return to the default values.
• Press the POWER button.
Using the RESET function will erase all stored settings.
Do not use this unless necessary.
• Is the remote control being operated within its operation range of
The remote control does
not work.
angle and distance?
• Are the batteries exhausted?
• Have you selected the mode(TV/DVD) functions of the remote
control (TV or DVD) correctly?
MISCELLANEOUS
61
Downloaded From TheatreSystem-Manual.com Manuals
62
Cautions on Handling and Storing Discs
Language Code List
Small scratches on the disc may reduce sound and picture quality or cause skipping.
Be especially careful not to scratch discs when handling them.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints will
not get on the surface.
Do not stick paper or tape on the disc.
Disc Storage
Keep in a cool ventilated area
Do not keep in
direct sunlight
Caution
Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle”
and/or “Disc Menu” (See page 43).
Code
Handling discs
Keep in a clean
Protection jacket.
Store vertically.
• Do not allow the discs to become contaminated with dirt.
• Do not load cracked or scratched discs.
Handling and Storing Discs
When you get fingerprints or dirt on the disc, clean it
with a mild detergent diluted in water and wipe with a
soft cloth.
• When cleaning, wipe gently from the inside to the outside of the disc.
• Condensation may form if warm air comes into contact with cold parts
Language
Code
Language
Code
Language
Code
Language
1027
Afar
1181
Frisian
1334
Latvian, Lettish
1506
Slovenian
1028
Abkhazian
1183
Irish
1345
Malagasy
1507
Samoan
1032
Afrikaans
1186
Scots Gaelic
1347
Maori
1508
Shona
1039
Amharic
1194
Galician
1349
Macedonian
1509
Somali
1044
Arabic
1196
Guarani
1350
Malayalam
1511
Albanian
1045
Assamese
1203
Gujarati
1352
Mongolian
1512
Serbian
1051
Aymara
1209
Hausa
1353
Moldavian
1513
Siswati
1052
Azerbaijani
1217
Hindi
1356
Marathi
1514
Sesotho
1053
Bashkir
1226
Croatian
1357
Malay
1515
Sundanese
1057
Byelorussian
1229
Hungarian
1358
Maltese
1516
Swedish
1059
Bulgarian
1233
Armenian
1363
Burmese
1517
Swahili
1060
Bihari
1235
Interlingua
1365
Nauru
1521
Tamil
1239
1069
Bislama
Interlingue
1369
Nepali
1525
Tegulu
1066
Bengali; Bangla
1245
Inupiak
1376
Dutch
1527
Tajik
1067
Tibetan
1248
Indonesian
1379
Norwegian
1528
Thai
1070
Breton
1253
Icelandic
1393
Occitan
1529
Tigrinya
1079
Catalan
1254
Italian
1403
(Afan) Oromo
1531
Turkmen
1093
Corsican
1257
Hebrew
1408
Oriya
1532
Tagalog
1097
Czech
1261
Japanese
1417
Punjabi
1534
Setswana
1103
Welsh
1269
Yiddish
1428
Polish
1535
Tonga
1105
Danish
1283
Javanese
1435
Pashto, Pushto
1538
Turkish
1109
German
1287
Georgian
1436
Portuguese
1539
Tsonga
1130
Bhutani
1297
Kazakh
1463
Quechua
1540
Tatar
1142
Greek
1298
Greenlandic
1481
Rhaeto-Romance
1543
Twi
1144
English
1299
Cambodian
1482
Kirundi
1557
Ukrainian
1145
Esperanto
1300
Kannada
1483
Romanian
1564
Urdu
1149
Spanish
1301
Korean
1489
Russian
1572
Uzbek
1150
Estonian
1305
Kashmiri
1491
Kinyarwanda
1581
Vietnamese
1151
Basque
1307
Kurdish
1495
Sanskrit
1587
Volapuk
1157
Persian
1311
Kirghiz
1498
Sindhi
1613
Wolof
1165
Finnish
1313
Latin
1501
Sangro
1632
Xhosa
1166
Fiji
1326
Lingala
1502
Serbo-Croatian
1665
Yoruba
1171
Faeroese
1327
Laothian
1503
Singhalese
1684
Chinese
1174
French
1332
Lithuanian
1505
Slovak
1697
Zulu
inside the player. When condensation forms inside the player, the player may not operate correctly. If this occurs, remove the disc and let the
player stand for 1 or 2 hours with the power on.
63
Downloaded From TheatreSystem-Manual.com Manuals
64
MISCELLANEOUS
Note
ENG
USB Host Feature Supported Products
Digital Camera
Product
Finepix-A340
Finepix-F810
Finepix-F610
Finepix-f450
Finepix S7000
Finepix A310
KD-310Z
Finecam SL300R
Finecam SL400R
Finecam S5R
Finecam Xt
Dimage-Z1
Dimage Z1
Dimage X21
Coolpix4200
Coolpix4300
Coolpix 2200
Coolpix 3500
Coolpix 3700
Coolpix 4100
Coolpix 5200
Stylus 410 digital
300-digital
U300
X-350
C-760
C-5060
X1
U-mini
Lumix-FZ20
DMC-FX7GD
Lumix LC33
LUMIX DMC-F1
Optio-S40
Optio-S50
Optio 33LF
Optio MX
Digimax-420
Digimax-400
Sora PDR-T30
Coolpix 5900
Coolpix S1
Coolpix 7600
DMC-FX7
Dimage Xt
AZ-1
USB Flash Disk
Company
Type
Fuji
Fuji
Fuji
Fuji
Fuji
Fuji
Konica
Kyocera
Kyocera
Kyocera
Kyocera
Minolta
Minolta
Minolta
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Nikon
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Olympus
Panasonic
Panasonic
Panasonic
Panasonic
Pentax
Pentax
Pentax
Pentax
Samsung
Samsung
Toshiba
Nikon
Nikon
Nikon
Panasonic
Minolta
Olympus
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Digital Camera
Product
Cruzer Micro
Cruzer Mini
Cruzer Mini
SONY Micro Vault
FLEX DRIVE
AnyDrive
XTICK
Micro Mini
iFlash
LG
RiDATA
Company
Type
Sandisk
Sandisk
Sandisk
Sony
Serotech
A.L tech
LG
Iomega
Imation
XTICK(M)
EZDrive
USB 2.0 USB Flash Drive 128M
USB 2.0 128M
USB 2.0 256M
USB 2.0 64MB
USB 2.0 32MB
USB 2.0 128MB
USB 2.0 128M
USB 2.0 128M
USB 2.0 64M
USB 2.0 64M
USB 2.0 64M
MP3 Player
Product
Company
Type
Creative MuVo NX128M
Iriver H320
YH-920
YP-T7
YP-MT6
YP-T6
YP-53
YP-ST5
YP-T5
YP-60
YP-780
YP-35
YP-55
iAUDIO U2
iAUDIO G3
iAudio M3
SI-M500L
H10
YP-T5 VB
YP-53
Creative
Iriver
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Samsung
Cowon
Cowon
Cowon
Sharp
Iriver
Samsung
Samsung
128 MB MP3 Player
20G HDD MP3 Player
20G HDD MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
MP3 Player
HDD MP3 Player
256MB MP3 Player
MP3 Player
MP3 Player
256MB MP3 Player
Specifications
G
E
N
E
R
A
L
T
F U
M N
E
R
V
I
D
E
O
A
M
P
L
I
F
I
E
R
O
U
T
P
U
T
Power Consumption
Weight
Dimensions (W x H x D)
Operating Temperature Range
Operating Humidity Range
Usable Sensitivity
S/N Ratio
Distortion
Composite Video
Component Video
HDMI
Front speaker output
Subwoofer speaker output
Frequency range
S/N Ratio
Channel separation
Input sensitivity
Speaker system
S
P
E
A
K
E
R
Impedance
Frequency range
Output sound pressure level
Rated input
Maximum input
Dimensions (W x H x D)
Weights
ENG
80W
11Ibs
20.5 x 12.6 x 7 inches
41°F ~ 95°F
10% ~ 75%
10dB
60dB
0.5%
1.0Vp-p(75Ω load)
Y:1.0Vp-p(75Ω load)
Pr:0.70Vp-p(75Ω load)
Pb:0.70Vp-p(75Ω load)
Impedance: 85~115
100W x 2(3Ω)
100W(3Ω)
20Hz~20KHz
70dB
60dB
(AUX)400mV
2.1ch speaker system
Subwoofer speaker
3Ω
40Hz~200Hz
85dB/W/M
100W
200W
7x 14.3 x 14.9 inches
3.8 x 18.9x 3 inches
3.2 Ibs
1.45 Ibs
Front speaker
3Ω
150Hz~20kHz
82dB/W/M
100W
200W
Multi Card Reader
Product
UNICORN
USB 2.0 Card Reader
Company
Type
Unicorn
USB 2.0 7 IN 1 CARD READER UC-601R
Billionton(Taiwan) USB 2.0 Card Reader for SD/MMC/RS-MMC(3-in-1)
MISCELLANEOUS
USB External HDD
Product
CUTIE
MOMOBAY UX-2
65
Downloaded From TheatreSystem-Manual.com Manuals
Company
Type
Serotech
Dvico
POCKET HARD DISK DRIVE
USB 2.0
66
SAMSUNG Home Theater
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by Samsung Electronics America, Inc. (SAMSUNG) and delivered new, in the original
carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited
warranty period of:
One (1) Year Parts and Labor*
(*90 Days Parts and Labor for Commercial Use)
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if
found to be defective during the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and
must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is
longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the
applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis. Non-SAMSUNG
manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise
expressly provided for in this statement, noncommercial use of this product, and shall not apply to the following, including, but not limited to:
damage which occurs in shipment; delivery and installation; applications and uses for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and
authorized by SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges;
customer adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered and
prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise, echo, interference or other
signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER
EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON
SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE
THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND
PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS
PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL NOT
EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR
EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages,
so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To obtain warranty hardware service, please contact SAMSUNG at:
SAMSUNG CUSTOMER CARE CENTER
400 Valley Road, Suite 201, Mt. Arlington, NJ 07856
1-800-SAMSUNG (1-800-726-7864) and www.samsung.com
Downloaded From TheatreSystem-Manual.com Manuals
Memo