Mitsubishi DD-8040 Operating instructions

E5733UD.qxp 03.5.12 3:00 PM Page 1
DD-8040
DVD Player
Owner's Guide
VIDEO/AUDIO
E5733UD.qxp 03.5.12 3:00 PM Page 2
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
• For models having a power cord with a polarized plug.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, FULLY
INSERT.
DANGER:
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
CAUTION:
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
–2–
EN
1L25
E5733UD.qxp 03.5.12 3:00 PM Page 3
IMPORTANT SAFEGUARDS
PLEASE READ ALL THESE INSTRUCTIONS AND RETAIN FOR FUTURE REFERENCE. FOLLOW
ALL WARNINGS AND INSTRUCTIONS MARKED ON THE DVD PLAYER.
1. Importance of Instructions
All the safety and operating instructions
should be read before the appliance is operated.
The safety and operating instructions should be
retained for future reference.
An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
surfaces may cause the appliance and cart
combination to overturn.
7. Ventilation
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
DVD Player and to protect it from overheating. Do
not block these openings or allow them to be blocked
Cleaning
by placing the DVD Player on a bed, sofa, rug, or
Unplug this DVD Player from the wall outlet before
other similar surface, nor should it be placed over a
cleaning. Do not use liquid or aerosol cleaners. Use
radiator or heat register. If the DVD Player is to be
a damp cloth for cleaning.
placed in a rack or bookcase, ensure that there is
adequate ventilation and that you adhere to the
Attachment and Equipment
manufacturer’s instructions.
Never add any attachments and/or equipment
without approval of the manufacturer, as such
additions may result in the risk of fire, electric shock, 8. Stacking
Do not place any heavy object(s) on top of your DVD
or other personal injury.
player. The object(s) may fall, causing serious injury
Water and Moisture
and/or damage to the product.
Do not use this DVD Player where contact with or
immersion in water is a possibility. Do not use near 9. Power Sources
bath tubs, wash bowls, kitchen sinks, laundry tubs,
This DVD Player should be operated only from the
swimming pools, etc.
type of power source indicated on the marking label.
If you are not sure of the type of power supply to
Moisture Condensation
your home, consult your appliance dealer or local
A drastic change in temperature, such as, moving
power company. Overloading wall outlets and
your DVD player from a cold area to a warm area
extension cords, can result in a risk of fire or electric
can cause moisture condensation on the optical pickshock.
up lens. You must allow the player to evaporate any
All warnings on the appliance and in the
operating instructions should be adhered to. All
instructions should be followed.
2.
3.
4.
5.
moisture before you play any discs. To do this,
remove any discs that are in the player. Then turn 10. Grounding or Polarization
For your safety, this DVD Player is equipped with a
the player on for two to three hours until it warms
polarized alternating current line plug having one
up. Using your DVD player before the moisture
blade wider than the other. This plug will fit into the
evaporates could seriously damage discs and
power outlet only one way. If you are unable to insert
internal parts.
the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician
6. Accessories
to replace your obsolete outlet. Do not defeat the
Do not place this DVD Player on an unstable cart,
safety purpose of the polarized plug.
stand, tripod, bracket, or table. The DVD Player may
fall, causing serious injury to a child or adult, and
serious damage to the appliance. Use only with a 11. Power-Cord Protection
Place the power-supply cord out of the way, where
cart, stand, tripod bracket, or table recommended
it will not be walked on, paying particular attention
by the manufacturer or sold with the DVD Player.
to cords at plugs, convenience receptacles, and the
Any mounting of the appliance should follow the
point where they exit from the appliance.
manufacturer’s instructions, and should use a
mounting accessory recommended by the
12. Lightning
manufacturer.
Unplug your DVD Player from the wall outlet if it will
not be used for a long time or if there is a lighting
storm. This will prevent damage to the product due
to lightning and power-line surges.
S3125A
–3–
EN
1L25
E5733UD.qxp 03.5.12 3:00 PM Page 4
IMPORTANT SAFEGUARDS (continued)
13.
Object and Liquid Entry
Never push objects of any kind into this DVD
Player through openings, as they may touch
dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill
any liquid on the DVD Player.
14.
Servicing
Do not attempt to service this DVD Player
yourself, as opening or removing covers may
expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
15.
Damage Requiring Service
Unplug this DVD Player from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
19.
Radiation Safety
The laser is covered by a housing which prevents
exposure during operation or maintenance. This
product is classified as a Laser Product by CDRH
(Center for Devices and Radiological Health), a
department of the Food and Drug Administration.
According to their regulations, 21 CFR section
1002.30, all manufacturers who sell Laser
Products must maintain records of written
communications among the manufacturer,
dealers, and customers concerning radiation
safety. If you have any complaints about instructions or explanations affecting the use of this
product, please write to us at the address on the
back page of this manual. When writing, include
the model number and serial number of your
DVD Player.
20.
In compliance with Federal Regulations, the
certification, identification, and period of manufacture are indicated on the rear panel.
21.
FCC INFORMATION FOR USER
(a) When the power-supply cord or plug is
damaged.
(b) If liquid has been spilled, or objects have
fallen into the DVD Player.
(c) If the DVD Player has been exposed to rain or
water.
(d) If the DVD Player does not operate normally
when you follow the operating instructions.
Improper adjustment of other controls may result
in damage and will often require extensive work
by a qualified technician to restore the DVD
Player to its normal operation.
Changes or modifications not expressly approved
by the manufacturer for compliance could void
the user’s authority to operate the equipment.
IMPORTANT:
(e) If the DVD Player has been dropped or the
cabinet has been damaged.
(f) When the DVD Player exhibits a distinct
change in performance.
16.
Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts specified by the manufacturer, or having the
same characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
17.
Safety Check
Upon completion of any service or repairs to this
DVD Player, ask the service technician to perform
safety checks to determine that the DVD Player is
in a safe operating condition.
18.
CAUTION:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user can try to
correct the interference by one of the following
measures:
(a) Reorient or relocate the receiving antenna.
(b) Increase the separation between the equipment and the receiver.
(c) Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Heat
The DVD Player should be situated away from
heat sources, such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat.
(d) Consult the dealer or an experienced radio/TV
technician for help.
–4–
EN
1L25
E5733UD.qxp 03.5.12 3:00 PM Page 5
NOTES
A Note About Recycling
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with
your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with
your local regulations concerning chemical wastes.
The serial number of this product may be found on the back of the DVD player. No others have the same serial number
as yours. You should record the number and other vital information here and retain this book as a permanent record of
your purchase to aid identification in case of theft. Serial numbers are not kept on file.
About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Supplied Accessories
GU
IDE
Two AA
batteries
Remote
control
A/V cables
Registration
Owner's Guide
Registration Card
Symbols Used in This Manual
The following symbols appear below some headings
and in some notes in this manual.
DVD-V
:Refers to playback of DVD Video discs.
DVD-A
:Refers to playback of DVD Audio discs.
CD
:Refers to playback of audio CDs.
MP3
:Refers to playback of MP3 discs.
JPEG
:JPEG video data recorded in the data CD (CD-R and CD-RW) can be displayed.
WMA
:Windows Media Audio (WMA) can be played back.
VCD
:Description refers to playback of Video CDs.
Picture CD
:Picture CD of KODAK standard can be played back.
DVD-RW
Refers to playback of the Video Recording Format discs.
Video Recording Format is a recording mode to enjoy features unique to DVD recorder such as program editing and
manual-mode recording with variable recording time using a DVD-RW disc.
This label indicates playback compatibility with DVD-RW discs recorded in VR mode (Video Recording Format).
–5–
EN
1L25
E5733UD.qxp 03.5.12 3:00 PM Page 6
TABLE OF CONTENTS
■
■
■
■
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ABOUT THE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DISC TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
■ OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
DISPLAYS DURING OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
LOADING THE BATTERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
■ HOOKUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CONNECTING TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER. . . . . . . . . . . . . . . . . . . . . . . 12
CONNECTING TO A TV OR A STEREO TV THAT HAS COMPONENT VIDEO IN JACKS . . . . . . . . 12
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS
SUCH AS MD DECK OR DAT DECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
■ PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USING THE DVD MENUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
PLAYING A DISC RECORDED IN THE VIDEO RECORDING FORMAT. . . . . . . . . . . . . . . . . . . . . . . 15
USING THE TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PAUSING PLAYBACK OR DISPLAYING A STILL PICTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
RESUMING PLAYBACK FROM THE POINT WHERE PLAYBACK STOPPED . . . . . . . . . . . . . . . . . . 16
STEPPING THROUGH FRAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PAGE SELECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
FAST FORWARD/REVERSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
SLOW MOTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
STARTING FROM A DESIRED TRACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PLAYING FROM A DESIRED GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
TO PLAYBACK THE BONUS GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PLAYING FROM A DESIRED TITLE OR CHAPTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
STARTING FROM A DESIRED TIME COUNT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MARKER SETUP SCREEN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
RANDOM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLAYBACK OF ALL GROUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
ZOOM PLAYBACK (enlargement on-screen) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PLAYING MP3 / JPEG IMAGE, WMA AND PICTURE CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PLAYING MP3 DISC / JPEG DISC / WMA / PICTURE CD IN A PROGRAMMED WAY . . . . . . . . . . . 23
PLAYING AN MP3 DISC / JPEG DISC / WMA DISC FROM A DESIRED TRACK. . . . . . . . . . . . . . . . 23
PLAYING AN MP3 DISC / JPEG DISC / WMA DISC / PICTURE CD AT RANDOM . . . . . . . . . . . . . . 23
■ SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CHANGING THE AUDIO LANGUAGE OR SOUND MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
CHANGING THE SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CHANGING THE CAMERA ANGLE (Multi-Angle Pictures) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
SETTING IMAGE QUALITY ADJUSTMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
■ CHANGING THE SETUP ITEMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LANGUAGE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
DISPLAY SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
■ TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
■ HANDLING PRECAUTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
■ SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
■ MITSUBISHI DVD Player LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
–6–
EN
1L25
E5733UD.qxp 03.5.12 3:00 PM Page 7
FEATURES
¡Analog 6-Channel decoder
¡On-screen display
This player is equipped with an analog 6-Channel decoder
for DVD Audio/Dolby Digital playback (does not support
DTS sound).
¡Progressive Scan system
Unlike conventional interlace scanning, the progressive
scan system provides less flickering and images in higher
resolution than that of traditional television signals.
¡Dolby Digital sound
This player can handle Dolby Digital surround sound
with 5.1 channels when connected to a Dolby Digital
Decoder.
¡DTS (Digital Theater System)
You can enjoy 5.1 channel surround system developed by
Digital Theater System which reproduces the
original sound as truthfully as possible.
¡Still/fast/slow/step playback
Various playback modes are available including still
pictures, fast forward/reverse, slow motion and step
frames.
¡Random playback for DVD Audio and audio CD /
MP3 / JPEG / Picture CD /WMA
This player can shuffle the order of tracks to play them in
random order.
¡Program playback for DVD Audio and audio CD /
MP3 / JPEG / Picture CD / WMA
You can program the order of tracks to play them in any
desired order.
¡DVD menus in a desired language
You can display DVD menus in a desired language, if
available on a DVD.
¡Screen saver/Auto power-off functions
The screen saver program starts when there is no input
from the player for five minutes in the stop mode. When
the screen saver program is activated for 30 minutes, the
power is automatically turned off.
¡Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
¡Selecting a camera angle
You can select the desired camera angle, if a disc contains
sequences recorded from different angles.
¡Choices for audio language and sound mode
You can select the desired audio language and sound mode, if
different languages and modes are available on a disc.
¡Parental lock
You can set the control level to limit playback of discs
which may not be suitable for children.
¡Automatic detection of discs
This player automatically detects if a loaded disc is DVD
Video, DVD Audio, audio CD, Video CD, MP3, JPEG,
Picture CD, WMA on disc.
¡Playing an MP3 disc
You can enjoy MP3 files which are recorded on
CD-R/RW.
¡Direct Search
You can search the desired title, chapter, and track with
numeric button during playback or in stop mode.
¡Marker
You can memorize your favorite places on a disc.
¡Playing a DVD-RW disc
You can enjoy playbak compatibility with DVD-RW discs
recorded in VR mode (Video Recording Format).
Information about the current operation can be displayed
on a TV screen, allowing you to confirm the currently
active functions (such as program playback), on the TV
screen using the remote control.
¡Search
Chapter search:Search for the chapter designated by user
is possible.
Title search: Search for the title designated by user is
possible.
Group search: Search for the group designated by user is
possible
Track search: Search for the track designated by user is
possible.
Time search: Search for the time designated by user is
possible.
¡Repeat
Chapter:
Repeated playback of the chapter of the
disc being played is possible.
Title:
Repeated playback of the title of the disc
being played is possible.
Track (DVD Audio, audio CD):
Repeated playback of the track of the disc
being played is possible.
Disc (audio CD, Video CD, MP3/JPEG/WMA):
Repeated playback of the entire disc being
played is possible.
A-B:
The part between A and B designated by
user is possible.
Group (DVD Audio, MP3, JPEG, WMA):
Repeated playback of the folder of the
MP3/JPEG/WMA disc being played is
possible.
¡Zoom
1.3, 2-time and 4-time magnified screen can be displayed.
¡Resume Play
User can resume to playback from the part at which the
play was stopped even if the power is turned off.
¡Component Video Out Jacks
Jacks located on the back of the DVD Player which are
used to send high-quality video to a TV via Component
Video In Jacks.
¡Dimmer
Brightness of the display can be varied.
¡Bit rate indication
¡DRC (Dynamic range control)
You can control the range of sound volume.
¡Audio output during fast forward (DVD)
Audio output is available during 2-time playback with
DVD.
¡Playing a disc in Video Recording Format
The product can run a disc recorded in the Video
Recording Format.
¡JPEG Photo Viewer
¡Displaying a Picture CD playback
¡WMA playback
¡Adjusting image quality
The user can adjust the degree of noise reduction mode, image
quality mode, gamma correction, sharpness, color depth and hue.
When you play the Video CD with PBC function, you
cannot choose a specified track and set Repeat.
To play the Video CD without PBC function, refer to page 14.
–7–
EN
1L25
E5733UD.qxp 03.5.12 3:00 PM Page 8
ABOUT THE DISCS
PLAYABLE DISCS
DISC TYPES
The following discs can be played back on this DVD player.
[DVD Video]
Data on a DVD is divided into sections called "titles," and
then into subsections called "chapters," each of which is
given a title or chapter number. Playback conditions are
preset on some DVD Video discs, and these playback
conditions take priority over user operations on this player.
If a function you selected does not run as desired, refer to
the manual accompanying the disc.
Disc Type
Logo
Contents
Disc Size
12 cm
DVD
Video
Sound
and
Pictures
8 cm
12 cm
DVD
Audio
Sound
8 cm
Audio
CD
Sound
Video
CD
Sound
and
Pictures
Picture
CD
Digital
photos
Maximum
Playback Time
Approx. 4 h
(single-sided)
Approx. 8 h
(double-sided)
Approx. 80 min
(single-sided)
Approx. 160 min
(double-sided)
Approx. 4 h
(single-sided)
Approx. 8 h
(double-sided)
Approx. 80 min
(single-sided)
Approx. 150 min
(double-sided)
12 cm
74 min
8 cm
(singles)
20 min
12 cm
8 cm
(singles)
Example
Title 1
Title 2
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
[DVD Audio]
Example
Group 1
Track 1
Track 2
Track 3
Group 2
Track 4
Track 1
Track 2
74 min
20 min
[AUDIO CD] [VIDEO CD]
Data on an audio CD or a Video CD is divided into sections
called “tracks,” each of which is given a track number.
The following discs are also available.
• CD-R/CD-RW discs of CD-DA format
Some of these discs may be incompatible because of
"scratch and stain of disc", "Recording condition", and
"Characteristic of Recorder".
Example
Track 1
This player conforms to the NTSC color system. You
cannot play discs recorded in other color systems such as
PAL or SECAM.
¡Some discs include region codes as shown below.
¡The number inside the symbol refers to a region of the
world, and a disc encoded in a specific region format can
only be played back on DVD players with the same region
code.
The following discs cannot be played back on this DVD
player.
¡DVD with region codes other than 1 or ALL.
¡DVD-ROM
¡DVD-RAM (Never play back, otherwise
malfunction may result.)
¡CD-ROM
¡VSD
¡CDV (Only plays back the audio part.)
¡CD-G (Only plays back the sound.)
¡CD-R/CD-RW (Only plays back the discs which
audio CD/MP3/JPEG/WMA is recorded.)
¡CD-I (Never play back, otherwise malfunction may
result.)
¡SACD
¡Photo CD (Never play back, otherwise
malfunction may result.)
Any other discs without compatibility indications.
Track 2
Track 3
Track 4
Track 5
Track 6
ABOUT THE PBC FUNCTION OF VIDEO CD
This unit conforms to ver 1.1 and ver 2.0 of Video CD
standard with PBC function.
ver 1.1 (without PBC function): You can enjoy playback
picture as well as audio CD.
ver 2.0 (with PBC function): While using a Video CD with
PBC function, “PBC” appears on the screen and the display.
What is PBC? “PBC” stands for the Playback Control.
You can play interactive software using menu screen. Refer
to instructions in the Video CD.
Note:
When you play the Video CD with PBC function, you cannot
choose a specified track and set Repeat.
To play the Video CD without PBC function, refer page 14.
[MP3, JPEG or WMA]
These files are divided into sections called "groups," and
then into subsections called "tracks," each of which is given
an album or track number.
–8–
Example
Group 1
Track 1
Track 2
Track 3
Group 2
Track 4
Track 1
Track 2
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 9
OPERATING CONTROLS AND FUNCTIONS
FRONT PANEL
1
2 3 4
5
6
7
8
REMOTE CONTROL
1
9
10
11
12
13
14
15
16
17
18
28
6
27
26
25
24
23
5
2
4
22
3
21
20
19
1. POWER Button [page 14]
Press to turn the power on and off.
2. PAUSE Button (main unit) [page 15]
Pauses the current disc operation.
PAUSE/STEP Button (remote control) [page 15]
Pauses the current disc operation. View the still
picture frame by frame.
3. STOP Button [page 14]
Stops operation of the disc.
4. PLAY Button [page 14]
Starts playback of the disc contents.
5. SKIP Buttons
G: Plays back from the beginning of the next
chapter or track.
j: Plays back from the beginning of the current
chapter or track.
6. OPEN/CLOSE Button [page 14]
Press to insert or remove discs from the tray.
7. Disc loading tray
8. Display, Remote Sensor Window
9. Numeric Buttons [page 14]
10. CLEAR Button [page 18]
Resets a setting.
11. TITLE Button [page 15]
Displays the title menu.
12. Arrow Buttons
Use to scroll and cycle through disc and player menus
and settings.
13. ENTER Button
Press to accept a setting.
14. ZOOM Button [page 20]
Enlarges part of a DVD-reproduced image.
15. REV Button [page 16]
Fast reverse playback to a desired point.
16. SEARCH MODE Button [pages 17, 18]
Press to locate a desired point.
17. REPEAT Button [page 19]
Repeats playback of the current disc, title, chapter or
track.
18. MODE Button [page 18]
Activates program playback or random playback mode
when playing DVD-Audio, CD or MP3/JPEG/Picture
CD/WMA. Also sets Black level, Image Quality mode,
and Noise Reduction. It selects freeze-frame viewing of
DVD-Audio.
19. DIMMER Button [page 10]
Select the display panel brightness.
20. A-B REPEAT Button [page 19]
Repeats playback of a selected section.
21. DISPLAY Button [page 26]
Displays timer and bit-rate information on the TV
screen.
22. FWD Button [page 16]
Fast forwards playback to a desired point.
23. RETURN Button
Returns to the previous operation.
24. MENU Button [page 14]
Displays the disc menus.
25. ANGLE Button [page 25]
Press to change the camera angle to see the sequence
being played back from a different angle.
26. SUBTITLE Button [page 25]
Press to select a desired subtitle language.
27. AUDIO Button [page 24]
Press to select a desired audio language or sound mode.
28. SETUP Button [page 29]
Press to enter the setup mode or to change setup items.
–9–
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 10
REAR VIEW
AUDIO OUT
OPTICAL COAXIAL
L
Y
Cr
R
VIDEO
Cb
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
29
L
VIDEO OUT
S
L
CENTER
ANALOG
5.1 CH
AUDIO OUT
P
R
R SUBWOOFER
FRONT SURROUND
SCAN MODE
30 31 32 33 34 35 36 37
29. Power Cord
30. Left AUDIO OUT Jack
31. OPTICAL DIGITAL AUDIO OUT Jack
32. COAXIAL DIGITAL AUDIO OUT Jack
33. Right AUDIO OUT Jack
38
34. VIDEO OUT Jack
35. Component Video Out Jacks
36. S-VIDEO OUT Jack
37. SCAN MODE Switch
38. ANALOG 5.1 CH AUDIO OUT Jacks
DISPLAYS DURING
OPERATION
DISPLAY
Lights-up when a DVD is inserted
"CD" lights up when an audio CD is inserted
"VIDEO CD" lights up when a Video CD is inserted
Lights-up when the repeat mode
or A-B repeat mode is set
Lights-up when
playback control is activated
Displays a title number
Displays how long a current
title or track has been played
back.
When a chapter or track has
switched, the number of a
new title, chapter or track is
displayed.
Displays the disc status
Displays a chapter or track number
Lights-up when the
multi-angle scene is taken
It is possible to change the brightness of display
unit by pressing the DIMMER button of remote
control.
Bright
Dark
(“ON” is lit.)
Power on
(“Disc icon” blinks.)
Tray open and closed
(“Disc icon” rotates.)
LOAD
(“Disc icon” rotates.)
During playback
(A segment on
“Disc icon” blinks.)
During pause
(Two segments on
“Disc icon” blink.)
Stop (Resume ON)
(“Disc icon” is lit.)
Stop (Resume OFF)
(“OFF” is lit.)
Power off
No disc or error
(“- - - - -” is lit.)
-----
ERROR
LOADING THE BATTERIES
1. Open the battery compartment cover.
2. Insert two AA batteries, with each one
oriented correctly.
3. Close the cover.
Notes
¡Do not mix alkaline and manganese batteries.
¡Do not mix old and new batteries.
OFF
• When the power supply is turned off, the
display is returned to the setup status.
– 10 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 11
HOOKUPS
CONNECTING TO A TV
L
AUDIO OUT
OPTICAL COAXIAL
Y
Cr
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R
VIDEO
Cb
L
VIDEO OUT
S
L
CENTER
ANALOG
5.1 CH
AUDIO OUT
P
SCAN MODE
R
R SUBWOOFER
FRONT SURROUND
To AUDIO OUT jacks
To Right (red)
and Left (white)
AUDIO INPUT jacks
To VIDEO INPUT jack
To VIDEO OUT jack
[Fig. 1]
FOR TVs WITH S-VIDEO INPUT JACK
Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy pictures at higher quality.
AUDIO OUT
OPTICAL COAXIAL
L
Y
Cr
VIDEO OUT
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R
VIDEO
Cb
S
L
L
CENTER
ANALOG
5.1 CH
AUDIO OUT
P
SCAN MODE
R SUBWOOFER
R
FRONT SURROUND
To AUDIO OUT jacks
To S-VIDEO OUT jack
To Right (red)
and Left (white)
AUDIO INPUT jacks
To S-VIDEO INPUT jack
[Fig. 2]
To S-VIDEO INPUT jack
but not both
To VIDEO
INPUT jack
To VIDEO OUT jack
AUDIO OUT
OPTICAL COAXIAL
L
Y
To S-VIDEO OUT jack
Cr
VIDEO OUT
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Stereo system
R
VIDEO
Cb
S
L
L
CENTER
ANALOG
5.1 CH
AUDIO OUT
P
SCAN MODE
R SUBWOOFER
R
FRONT SURROUND
To Right (red) and Left (white)
AUDIO OUT jacks
To ANALOG AUDIO INPUT jacks
[Fig. 3]
Notes
¡Connect the DVD player directly to a TV. If the A/V cables are connected to a VCR, pictures may be
distorted due to the copy protection system.
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner's Manuals for your TV, stereo system and any other components to be connected to the DVD player.
¡The analog output terminal does not supply DTS sound.
Selecting Progressive Scan (480p) or Interlaced (480i) Playback
¡If your TV is compatible with progressive scanning (480p), connect the TV to the Component Video Output
jacks of the DVD player and set the SCAN MODE switch on the back of the DVD player to “P”
(PROGRESSIVE). Next, set your TV to the progressive scan mode.
If your TV is not compatible with progressive scan, keep the SCAN MODE switch to “I” (INTERLACE).
¡Use a commercially available adaptor if the video input jacks of your TV or monitor are the BNC type.
¡When SCAN MODE switch is set to “P” (PROGRESSIVE), DVD player outputs from Component Video
Output Jack (not from VIDEO OUT or S-VIDEO OUT jack).
What is Progressive Scanning?
¡Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in
higher resolution than that of traditional (480i) television signals.
¡When P (PROGRESSIVE) is selected, no video signal will be output from the VIDEO OUT, or S-VIDEO OUT jack.
The DCDi (Directional Correlational De-interlacing) system of this DVD player produces smooth and natural video
images, even if really dynamic, by eliminating the jagged edges. "DCDi" is a trademark of Faroudja, a division of Genesis
Microchip Inc.
– 11 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 12
CONNECTING TO A DOLBY DIGITAL DECODER OR DTS DECODER
If using this DVD player to playback a DVD in a 5.1 channel Dolby Digital surround or DTS surround format, the DVD
player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT jacks. 5.1
channel Dolby Digital Surround sound can also be output from the 5.1 CH OUTPUT jacks. (They do not output the DTS
sound.) By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy a more convincing, realistic ambience
with powerful and high-quality surround sound of a professional standard, which can be heard in movie theaters.
Use an audio coaxial or optical digital cable (not included) for the audio connections.
Use audio cables (commercially available ) for the 5.1 CH audio connection.
To VIDEO INPUT jack
or
To S-VIDEO INPUT jack
To S-VIDEO INPUT jack
To S-VIDEO OUT
To VIDEO OUT jack
jack
but not both To VIDEO OUT jack
To VIDEO
INPUT jack
AUDIO OUT
OPTICAL COAXIAL
L
Y
Cr
AUDIO OUT
OPTICAL COAXIAL
VIDEO OUT
Y
To S-VIDEO OUT jack
Y
L
Y
Cr
I
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
R
VIDEO
Cb
S
L
VIDEO OUT
L
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
SCAN MODE
R
VIDEO
Cb
S
Center speaker
Dolby Digital or
DTS decoder
Surround
speaker
(left)
To OPTICAL DIGITAL
AUDIO OUT jack
Amplifier with
5.1 ch input terminal
To OPTICAL DIGITAL
AUDIO INPUT jack
To 5.1 CH INPUT jacks
Surround
speaker
(left)
or
To COAXIAL DIGITAL AUDIO
INPUT jack
To 5.1 CH
AUDIO OUT
jacks
Front speaker
(right)
Front speaker
(left)
To COAXIAL DIGITAL
AUDIO OUT jack
Front speaker
(right)
ANALOG
5.1 CH
AUDIO OUT
R SUBWOOFER
R
FRONT SURROUND
SCAN MODE
Center speaker
Front speaker
(left)
CENTER
P
P
Subwoofer
Subwoofer
Surround
speaker
(right)
Surround
speaker
(right)
[Fig. 4]
Notes
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.
¡If output is Dolby Digital audio, connect to a Dolby Digital decoder and set Dolby Digital to ON for audio
output in the setup mode.
¡If you want to enjoy DTS audio, use a DIGITAL AUDIO OUT jack for the connection. (DTS can only be
output through the DIGITAL AUDIO OUT jacks.)
¡If output is DTS audio, connect to a DTS decoder and set DTS to ON for audio output in the setup mode.
¡Unless connected to a Dolby Digital decoder or a DTS decoder, set Dolby Digital or DTS to OFF for audio
output in the setup mode. Playing a DVD using incorrect settings may generate noise distortion and may also
damage the speakers.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
CONNECTING TO A TV OR A STEREO TV THAT HAS
COMPONENT VIDEO IN JACKS
To COMPONENT VIDEO
INPUT jack (red, green, and blue)
AUDIO OUT
OPTICAL COAXIAL
L
Y
Cr
VIDEO OUT
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Stereo system
R
VIDEO
Cb
S
L
L
CENTER
ANALOG
5.1 CH
AUDIO OUT
P
SCAN MODE
R SUBWOOFER
R
FRONT SURROUND
To Right (red) and Left (white)
AUDIO OUT jacks
To ANALOG AUDIO
INPUT jacks
– 12 –
[Fig. 5]
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 13
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS SUCH AS MD DECK OR DAT DECK
Use an audio coaxial or optical digital cable (not included) for the audio connections.
Connecting to an amplifier equipped with digital input jacks such as MD Deck or Dat Deck:
or
To S-VIDEO INPUT jack
To S-VIDEO OUT jack
To VIDEO To VIDEO OUT jack
INPUT jack
AUDIO OUT
OPTICAL COAXIAL
L
Y
Cr
R
VIDEO
Cb
VIDEO OUT
I
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To OPTICAL
DIGITAL AUDIO
OUT jack
S
L
L
ANALOG
5.1 CH
AUDIO OUT
CENTER
P
SCAN MODE
R SUBWOOFER
R
FRONT SURROUND
To COAXIAL DIGITAL
AUDIO OUT jack
To OPTICAL
DIGITAL AUDIO
INPUT jack
or
To COAXIAL DIGITAL AUDIO INPUT jack
[Fig. 6]
Notes
¡The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
¡Be sure to turn off the power to all components in the system before connecting another component.
¡Refer to the Owner’s Manuals for the components to be connected to the DVD player.
¡Set Dolby Digital and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect settings
may generate noise distortion, and may also damage the speakers (See page 32 to set ON for Dolby Digital
and DTS).
HOW TO CONNECT TO A TV WITHOUT AUDIO/VIDEO INPUT JACKS
If your TV does not have RCA type audio and video input jacks, it is still possible to connect this DVD
player to your TV’s 75-ohm coaxial antenna terminal using a commercially available Stereo Audio/Video
RF Modulator that is not included. Connect the audio and video outputs of the DVD player to the audio and
video inputs on the RF Modulator, and then connect the coaxial output of the RF Modulator (usually marked
“TO TV”) to the 75 ohm coaxial antenna terminal on your TV. Follow the instruction supplied with the RF
Modulator for more details.
If your TV’s 75 ohm coaxial antenna terminal is already occupied by an antenna or cable box connection,
remove that cable from your TV’s antenna terminal and reconnect it to the coaxial antenna input terminal of
the RF Modulator (usually marked “ANT IN”), then connect the RF modulator to your TV’s antenna
terminal as described above.
Note
¡The picture quality from DVD discs will not be as good if the DVD player is connected to the TV’s
antenna terminal through an RF Modulator.
HINT FOR OPTICAL CABLE (NOT SUPPLIED)
¡Optical cable (not supplied) may be damaged when bent at acute angles. Ensure cables are coiled in loops
with a diameter of 6 inches or more when storing them.
¡Use a cable which is 9.8 feet or shorter.
¡Insert cable plugs firmly into the jacks when making connections.
¡If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a jack.
¡Replace the protective cap on the OPTICAL jack when it is not in use.
– 13 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 14
PLAYING A DISC
¡If a disc is dirty or has scratches, the pictures may
PLAYING A DVD VIDEO
OR AN AUDIO CD
DVD-A
DVD-V DVD-RW
CD
VCD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1 Press the POWER button.
¡The power will turn on.
2 Press the OPEN/CLOSE button.
¡The disc loading tray will open.
3 Place a disc into the tray.
¡Make sure the disc is sitting properly in the correct
recess, with the label side up. Discs that are
irregularly shaped, contain a scratch protection film,
or have any type of sticker or adhesive label should
not be inserted.
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback. Never attempt to play a cracked or broken
disc !
¡With DVD Videos that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
¡During the playback of a common two layered disc,
pictures may stop for a moment. This happens when
the 1st layer switches to the 2nd layer. This is not a
malfunction, and is commonly found on pre-recorded
discs.
¡During the playback of DVD-RW recorded in VR
mode, the sound or picture may freeze momentarily
depending on the writing conditions of discs.
¡Operation may vary when you playback DVDs with
a disc menu or Video CDs with PBC. Refer to the
manual accompanying the disc for details.
¡When you playback Video CDs with PBC, the time
counter does not appear on the display.
Cancelling PBC (for playback of a Video CD)
1. Insert a Video CD (Playback will start
automatically).
2. Press the STOP button.
3. Enter track number of your choice with the numeric
buttons.
4. PBC is now cancelled and the playback of the Video
CD will start.
4 Press the PLAY button.
¡The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
You need to press the PLAY button only when the
tray has been closed by pressing the OPEN/CLOSE
button.
¡When you playback a DVD Video and DVD Audio
or Video CD which a title menu is recorded, it may
appear on the screen. In this case, refer to “USING
THE TITLE MENU.”
5 Press the STOP button to stop play.
Notes
¡A “prohibited icon” may appear
at the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
USING THE DVD MENUS
DVD-V
Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.
1 Press the MENU button.
¡The DVD menu will appear.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
– 14 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 15
PLAYING A DISC RECORDED
IN THE VIDEO RECORDING
FORMAT
USING THE TITLE MENU
DVD-A
DVD-RW
The user can select either “Original” or “Play list”
before playing the disc if a “Play list” has been set in
the disk recorded in the Video Recording Format.
1 Press the MENU button when the system is
at rest.
DVD-V
With a DVD containing a title menu, you can select
desired titles from the menu.
1 Press the TITLE button.
¡The title menu will appear.
2 Select the desired title.
¡Press the arrow buttons (L/K/B/s) to change the
¡The menu screen of the currently set state appears.
setting, and then press the ENTER button.
CALLING UP A MENU SCREEN
DURING PLAYBACK
“Original” or “Play list”.
¡The menu screen does not display any play list For DVDs
2 Using the arrow buttons (s/B) select
unless a play list has been created.
¡When the setting state is switched, “resume” will be
released.
¡If the list contains eight or more titles, the user may
turn the page using SKIP buttons H or G.
¡Press the MENU button to call up the DVD menu.
¡Press the TITLE button to call up the title menu.
Note
¡Contents of menus and corresponding menu
operations may vary between discs. Refer to the
manual accompanying the disc for details.
3 Using the arrow buttons (K/L) select the
VCD
desired title to play.
4 Press the ENTER button.
¡The player starts playing the selected title.
Notes
¡“Original” here means a title made by recording by
DVD recorder.
¡“Play list” here means titles made for compilation
based on the originals.
With a Video CD containing a title menu, you can
select desired titles from the menu.
1. The title menu will appear.
2. Press the numeric button to select the menu.
Playback will start.
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
DVD-A
DVD-V
DVD-RW
MP3
CD
WMA
1 Press the PAUSE/STEP button during
playback.
¡Playback will pause, with sound
muted.
k
2 Press the PLAY button to resume playback.
B
– 15 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 16
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
DVD-A
DVD-V
DVD-RW
PAGE SELECTION
DVD-A
CD
PBC
VCD ( without
)
function
Some DVD Audio discs that include still images are
provided with a selection of images you can choose
from.
1 Press the STOP button during playback.
¡Playback will stop, and then the resume message
1 Press the MODE button 4 times during
Present number of static images
playback.
will appear at the center.
1/12
Total number of static images
Resume ON
2 Press the ENTER button.
¡It is in the ready state for you to enter the page
Press 'PLAY' to play from here.
To play the beginning,
number.
press 'STOP' first and then 'PLAY'
3 Press the numeric button to select the image
of your choice.
2 Press the PLAY button. Playback will start
from the point where the previous playback
session was stopped.
B
FAST FORWARD/REVERSE
DVD-A
DVD-V
CD
VCD
MP3
WMA DVD-RW
Note
¡The resume function can be reset by pressing the STOP
button twice or by opening the disc loading tray.
¡Some Video CDs with PBC function resume
playback from the beginning of the track.
¡The “Resume” information stays in the memory
even when the power is turned off.
STEPPING THROUGH FRAMES
DVD-A
DVD-V
DVD-RW
VCD
1 Press the PAUSE/STEP button while
1 Press the FWD g or REV h button
during playback.
¡For DVD Videos, pressing the FWD g or REV h
button cycles the playback speed in four steps. In case of
DVD Videos, the sound will mute. Turning on the doublespeed sound in SET UP enables output of sound.
¡For DVD audios, the playback speed is ×2, ×8 ×50
and ×100.
In case of DVD Audio discs, the sound will not mute.
¡For audio CDs, the playback speed is ×16 fixed.
¡For Video CDs, the playback speed is ×2, ×8 and ×30.
¡For WMA and MP3, the playback speed is ×8 fixed.
REV h button
FWD g button
playback is paused.
k
¡The next picture frame is
displayed with sound muted each
time the button is pressed.
2 Press the PLAY button to resume playback.
B
Note
¡For DVD Audio discs, only the picture can be forwarded
by a step.
2 Press the PLAY button to return to normal
playback speed.
– 16 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 17
PLAYING FROM A DESIRED GROUP
SLOW MOTION
DVD-A
DVD-RW
DVD-V
DVD-A
VCD
1 Press the SEARCH MODE button twice and then
1 Press the FWD g or REV h button while
press the numeric buttons to select a group.
When playback is stopped, press the numeric
buttons to select a Group.
The Group will be located
and playback will start.
playback is paused. (Sound remains muted.)
¡Slow motion mode will be activated.
¡Pressing the FWD g or REV h button cycles
1/12
the playback speed in three steps. Select an
appropriate speed while referring to the speed
indication on the screen.
TO PLAYBACK THE BONUS GROUP
FWD g button
REV h button
DVD-A
Some discs are recorded with Bonus Group that can be played back
by entering a password. Please refer to disc jackets also.
1 Search the bonus group during stop mode to
open the group search screen.
2 Press the bonus group number using
numerical buttons.
DVD-AUDIO
BONUS GROUP
Please enter a 4 - digit password.
2 Press the PLAY button to return to normal
playback speed.
Notes
¡Slow playback is not available with audio CDs,
MP3, WMA.
¡Reverse slow motion is not available with Video CD.
¡For DVD Audio discs, slow playback can be done
only for pictures.
STARTING FROM A DESIRED TRACK
DVD-A
CD
PBC
VCD (without
)
function
¡The password popup window opens.
3 Enter the password (4 digits) using
numerical buttons.
¡If the password is correct, playback starts from the
head of the bonus group.
Notes
¡Press the RETURN button to cancel the bonus group
searching.
¡Once the password is entered, it can be played back
repeatedly until the disc is taken out.
¡If the password is not entered, the bonus group
cannot be searched during playback.
1 Press the numeric buttons to enter the
PLAYING FROM A DESIRED
TITLE OR CHAPTER
desired track number.
¡The selected track will be located, and playback will start.
DVD-RW
You can also press the SEARCH MODE button, by using the
numeric buttons to enter the track number.
When the track number is entered in
the entry box, playback of the desired
track will start automatically.
1 Press SEARCH MODE once for the Chapter
Search, twice for the Title search during playback.
/ 34
TRICKS WITH THE SKIP BUTTONS (H, G)
If the SKIP button G is pressed during playback or
while playback is paused, the current track will be
skipped and the next track will be played. When the
SKIP button H is pressed once, the top of the
current track will be located for replaying. When the
SKIP button H is pressed again within 2-seconds
after playback begins, the previous track will be located.
DVD-V
2 Enter the desired chapter/title number using the
Number buttons.
¡During playback , press the numeric
/ 12
buttons to select a Chapter. The Chapter
will be located and playback will start.
¡When playback is stopped, press the numeric buttons to select
a Title. The Title will be located and playback will start.
Notes
¡Playback from a desired title or chapter is not
available with some DVDs.
¡Some discs in which the chapter number isn’t
displayed, can not playback from a desired chapter.
– 17 –
EN
1L25
E5733UD.qxp 03.5.13 15:07 Page 18
TRICKS WITH
(H, G)
THE
SKIP
4 To return to the Marker later, press SEARCH
BUTTONS
If the SKIP button G is pressed during playback or
while playback is paused, the current chapter will be
skipped and the next chapter will be played. When
the SKIP button H is pressed once, the top of the
current chapter will be located for replaying. When
the SKIP button H is pressed again within
2-seconds after playback begins, the previous
chapter will be located.
STARTING FROM A DESIRED
TIME COUNT
DVD-A DVD-V DVD-RW
VCD (
MODE four times (CD: three times) during
playback, and s or B to choose the desired
marker, then press ENTER.
Notes
¡Opening the disc tray, turning off the power, or
selecting AC at step 2 and pressing ENTER will
erase all Markers.
¡To clear a marker, using s or B, position the cursor on to
the marker number to be cleared and press CLEAR.
¡You can mark up to 10 points.
¡In the case of DVD Audios, marker searching may
start playback from the head of the marked TR, in
some discs or groups.
CD
without PBC
function
5 Press SEARCH MODE or RETURN to exit.
RANDOM
)
1 Press the SEARCH MODE button twice
CD
during playback.
2 Press the numeric buttons to set the desired
time count.
¡Example: 1 hour, 23 minutes and
30 seconds
1
2
3
3
:
:
TOTAL
1 Press the MODE button in stop mode.
¡The program setting menu screen will appear.
1 : 23 : 45
2 Press the MODE
button again.
0
RANDOM
CD [AUDIO]
TOTAL 0:45:55
RANDOM PROGRAM
Notes
¡In the case of DVD Video, Time Search in Title is
effective, but Time Search in Chapter is ineffective.
¡In the case of DVD Audio, CD and Video CD, Time
Search in Track is effective, but Time Search in the
entire disc is ineffective.
¡Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡If wrong numbers are entered, press the CLEAR
button and re-enter the correct numbers.
- - no indication - -
PLAY
3 Press the PLAY button. Random playback
will then start.
Note
¡Program playback is not available during random playback.
DVD-A
1 Press the MODE button
three times in stop mode.
MARKER SETUP SCREEN
DVD-A
DVD-V
DVD-RW
RANDOM
DVD-AUDIO
ALL
1 52:43
2 45:02
3 41:22
4 34:35
5 13:49
6 33:05
CD
1/2
ENTER
VCD (
without PBC
function
PLAY
CLEAR
)
3
41:22
2 Press o/p buttons to select the group you
Use markers to memorize your favorite places on a disc.
1 Press SEARCH MODE four times (CD: three
times) during playback.
wish to playback randomly, then press the
ENTER button.
RANDOM
1
¡Selecting “ALL” starts random
playback of all groups.
¡The display screen and Markers will appear on the
TOTAL 0:53:42
RANDOM PROGRAM
- - no indication - -
TV screen.
PLAY
2 Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9
or 10 and ensure that “_ : _ _ : _ _” appears
in the display.
3 When reachs the desired point, press ENTER.
¡The Title or Track and elapsed playing time will
appear in the TV screen.
3 Press playback button, Random playback
will then start.
Notes
¡During random playback, TITLE, MENU, Arrow and
ENTER buttons on the remote controller are disabled.
¡When the designated random playback ends, it changes to
stop mode.
– 18 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 19
For DVD Audio
REPEAT
No repeat
playback.
OFF
DVD-A
DVD-RW
DVD-V
CD
PBC
VCD ( without
)
function
The current Track
is played back
repeatedly.
TRACK
1 Press the REPEAT button.
For DVD Videos
GROUP
The current group
is played back
repeatedly.
ALL
The whole Disc
is played back
repeatedly.
¡A single title or chapter is played back repeatedly.
¡Pressing the REPEAT button cycles the display on
the screen as follows.
OFF
CHAPTER
TITLE
No repeat
playback.
A-B REPEAT
The current Track
is played back
repeatedly.
DVD-A
DVD-RW
DVD-V
The whole Disc
is played back
repeatedly.
CD
VCD
You can define a section to be played back repeatedly.
1 Press the A-B REPEAT button during playback.
For audio CDs or Video CDs
¡The whole disc or a single track is played back
¡The starting point (A) will then be
A-
selected.
repeatedly.
¡Pressing the REPEAT button cycles the display on
the screen through Off, Track and All.
OFF
TRACK
ALL
No repeat
playback.
2 Press the A-B REPEAT button again at the
end point (B) of the desired section.
¡The selected section will be
The current Track
is played back
repeatedly.
A-B
played back repeatedly.
The whole Disc
is played back
repeatedly.
3 To exit A-B repeat playback, press the A-B
REPEAT button and set it to OFF.
If the REPEAT button is pressed once
during program/random playback, the
current track is played back repeatedly.
If the REPEAT button is pressed again, the
program/random playback is performed
repeatedly.
Notes
¡Repeat playback is not available with some discs.
¡The REPEAT setting will be cleared when moving
to another title, chapter or track.
¡Repeat playback does not function during A-B
repeat playback.
¡Repeat playback is not available when you play the
Video CD with PBC function.
OFF
Notes
¡With DVD Videos, the A-B repeat section can be set
only within the current title.
¡With DVD Audio and audio CDs, Video CDs, the
A-B repeat section can be set within the current track.
¡A-B repeat is not available with some scenes in
certain DVDs.
¡To cancel the A point which was set, press the
CLEAR button.
¡A-B repeat playback does not function during title,
chapter, track or all repeat playback set.
– 19 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 20
PROGRAM
CD
1 Press the MODE button in stop mode.
¡The program screen will appear.
PROGRAM
CD [AUDIO]
2
3
4
5
6
7
TOTAL 0:00:00
5:02
1:22
4:35
3:49
3:05
4:18
1/3
ENTER
Notes
¡It may take time for all the respective track times to
be displayed.
¡The programmed content is retained until the power
is turned off or the tray is opened.
¡During program playback, TITLE, MENU, Arrow and
ENTER buttons on the remote controller are disabled.
¡When the designated program playback ends, it
changes to stop mode.
PLAYBACK OF ALL GROUPS
1/1
PLAY
CLEAR
2 Select a track using K/L
DVD-A
PROGRAM
CD [AUDIO]
buttons, then press the
ENTER button.
2
3
4
5
6
7
TOTAL 0:04:35
5:02
1:22
4:35
3:49
3:05
4:18
4
2/3
ENTER
PLAY
CLEAR
3
1 Press the MODE button
4:35
in stop mode to display
the all group screen.
1/1
ALL GROUP
DVD-AUDIO
TOTAL
1:40:53
ALL GROUP PLAYBACK
1:22
- - no indication - -
3 Press the PLAY button.
¡Playback will start in the programmed order.
¡While the program is being played back, the STOP button works
as follows:
Press the STOP button once and then the PLAY
button again, and playback will restart from the point where the
STOP button was pressed (Program continued).
Press the STOP button twice and then the PLAY
button again, and playback will restart from the track in the
usual way (Program cleared).
Notes
¡Adding programs is not possible during program
playback. You must stop the current playback before
such operations can be carried out.
¡Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
¡Up to 99 programs can be entered.
¡Playback from a desired track and random playback
are not available during program playback.
¡Program settings are cleared when the power is
turned off or the disc loading tray is opened.
DVD-A
1 Press the MODE button in stop mode to display
the program setting screen.
PROGRAM
DVD-AUDIO
1
2
3
4
5
6
7
Total 00:04:35
52:43
45:02
41:22
34:35
13:49
33:05
24:18
1
1/2
ENTER
PLAY
CLEAR
3
4 04:35
1/1
41:22
PLAY
2 Press the PLAY button.
ZOOM PLAYBACK
(enlargement on-screen)
DVD-RW
DVD-V
VCD
Images can be enlarged on the screen to your taste.
1 Press the ZOOM button during playback.
¡An image will be enlarged at the center of the screen.
¡Pressing the ZOOM button cycles the zooming
images in three steps.
×1.3
×2
×4
1 When the cursor (K/ L/s / B) button is pressed
during zoom play, the part to be zoomed moves.
¡The zooming frame can be moved from the center 4
steps to the right, 4 steps to the left, 4 steps to the
top, and 4 steps to the bottom when 2 time zooming.
The frames will move 6 steps when 4 time zooming.
(In the 1.3-time zoom display, just one step can be
shifted up and down as well as right and left.)
¡Current position will be displayed on the right
bottom of the screen. Press the ENTER button, and
the display disappears.
2 Select a group using o/p buttons, then press
the ENTER button.
¡The track select screen will be displayed.
¡It takes approximately five
PROGRAM
1
seconds until a track selection
screen appears.
Total 00:04:35
1
2
3
4
5
6
7
02:02
01:22
04:35
03:49
03:05
04:16
02:55
2/3
ENTER
PLAY
CLEAR
1
2
4 04:35
1/1
01:22
3 Select a track using o/p buttons and press the
ENTER button.
¡To return to the group select screen from the track
select screen, press the RETURN button.
4 Press the PLAY button.
Notes
¡Zooming function does not work while disc menu is shown.
¡×4 zoom is not available on some discs.
¡For Video CDs, only 2 times zooming is available.
– 20 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 21
¡The system can recognize up to 255 groups (or
PLAYING MP3 / JPEG IMAGE,
WMA AND PICTURE CD
MP3
JPEG
WMA
Picture CD
This machine can reproduce images and sounds from
data recorded in MP3, JPEG and WMA formats on
CD-ROM, CD-R and CD-RW discs.
The machine can also run Picture CD dealt by Kodak
Inc. The user can enjoy picture images on their
television set by reproducing Picture CDs.
* Picture CD is a service that converts photographs
taken by conventional film camera into digital data
and writes the data on a CD.
For details on Picture CD, contact a shop that deals
with the developing service of Kodak Inc.
Information on MP3, JPEG and WMA discs
¡A file with an extension of “.mp3 (MP3)” is called
an “MP3 file”.
¡A file with an extension of “.jpg (JPG)” or “.jpeg
(JPEG)” is called a “JPEG file”.
The machine can run an image file conforming to
the Exif* specification.
* This is a file format, Exchangeable Image File
format established by Japanese Electronic Industry
Development Association (JEIDA).
¡A file with an extension of “.wma (WMA)” is
called a “WMA file”.
¡Files whose extension is other than “.mp3 (MP3)”,
“.jpg (JPG)”, “.jpeg (JPEG)” and “.wma (WMA)”
will not be listed in the MP3, JPEG, or WMA
menu.
¡If the file is not recorded in MP3, JPEG or WMA
format, noise may be produced even if the file
extension is either of “.mp3 (MP3)”, “.jpg (JPG)”,
“.jpeg (JPEG)” and “.wma (WMA)”.
folders) and up to 256 tracks. (This applies to the
case where mixed MP3, JPEG and WMA files are
recorded.)
¡If no MP3, JPEG or WMA files are found in the
group, the group is not displayed.
¡The machine can reproduce data recorded as per ISO
9660 Level 1, Level 2 or Joliet on the disc.
¡It can also run a disc on which data is recorded in a
multi-session.
¡For more details of recording systems, see the
instruction manual for the CD-R / CD-RW drive or
the writing software.
Applicable MP3 file
Sampling
frequency
44.1kHz
48kHz
Type
MPEG1
audio layer 3
Remarks
• It is prohibited to record
MP3 sound on a digital
device when connection is
made digitally.
• MP3 files recorded at constant
bit rate of 128 kbps or higher
are recommended.
Applicable JPEG file
Remarks
• A JPEG image that extends
Upper limit:
Size of
6300×5100 dots beyond the screen is
image
reduced so that it will be
Lower limit:
displayed within the screen.
32×32 dots
Applicable WMA file
Remarks
Sampling
frequency
44.1kHz
48kHz
• Those frequencies are
applicable to WMA version 8
only, not to WMA version 9.
• It is prohibited to record
WMA sound on a digital
device when connection is
made digitally.
Bit rate
• Ensure that the copyright
48–192kbps
function is set to off when
128kbps
recommended preparing a WMA disc.
Type
• A prohibition “disable”
symbol will appear if the
WMA version 8 user attempts to run a
copyright-protected file.
Slide show mode switching of JPEG Picture CD
This machine can switch the slide show modes.
1 Press the MODE button during JPEG or
1 Insert a disc.
For discs on which MP3, JPEG or WMA
tracks are recorded:
Picture CD playback.
¡The slide show mode screen appears.
¡An MP3, JPEG or WMA track menu screen appears.
¡A symbol of “ ” is shown on the top of the group
CUT IN/OUT
name.
¡A symbol of “ ” is shown on the top of MP3 files.
¡A symbol of “ ” is shown on the top of JPEG files.
¡A symbol of “ ” is shown on the top of WMA files.
¡If the picture extends beyond the scope of screen, a
down arrow “L” appears, indicating that the user
can view another part of the picture on the next page.
If an up arrow “K” appears, it indicates that the user
can view another part on the previous page. The
current page number and the number of total pages
are shown on the right of the down arrow “L”.
¡The slide show mode cannot be switched when it is
stopped, or from the file list screen or the Picture
CD menu screen.
2 Press the ENTER button.
¡The slide show mode will change.
– 21 –
CUT IN/OUT: The entire image appears in one time.
FADE IN/OUT: The image appears gradually and then
disappears.
3 Press the MODE button to get out from mode.
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 22
For discs of Picture CD:
¡A Picture CD menu appears.
¡If all menu items cannot be displayed in the screen
scope, a prompt symbol “G” appears at the right
bottom of the screen, indicating that the user can
view remaining items on the next page. If another
prompt symbol “H” appears, it indicates that the
user can view other items on the previous page. The
track number of the currently highlighted item and
the total tracks are shown at the center bottom of the
screen.
Picture CD
Picture1
Picture 2
Picture 3
Picture4
Picture 5
Picture 6
Notes
¡JPEG, Picture CD can not be zoomed at 4
magnifications.
¡If any screen zoomed at 2 magnifications in JPEG is
fully displayed in the screen, the indication position
can not be moved with the Arrow (K/L/s/B)
button.
¡The number of movable steps is different depending on
the screen size. (Maximum: 4 steps up-/downward and
left-/rightward)
¡The zoomed screen can not be rotated for display.
First rotate the screen for display, and then press
ZOOM button.
Repeated replay of JPEG, Picture CD
1/32
TRACK
(current track
repeat)
Current track number /
the number of total tracks
¡If a prompt symbol “G” is shown at the bottom
right, use the G button to view the next page. If
another prompt symbol “H” is shown at the
bottom left, use the H button to view the previous
page.
¡It may take some time until all menu items are
displayed on the menu screen.
2 Using the K/L buttons, (for Picture CD,
s/B/K/L buttons), select your desired track
to be played, and press the PLAY or ENTER
button.
[If an MP3 or WMA file is selected:]
Playback will start from the selected track and go to
the next one in turn.
[If a JPEG or Picture CD file is selected:]
An image will be played back from the selected track
and go to the next one in turn.
A track is displayed for five seconds and then the next
track is displayed.
Every press on the B button will turn the image
clockwise by 90 degrees when an image is displayed.
A press on the s will turn the image counterclockwise
by 90 degrees.
Zoom replay of JPEG, Picture CD
1 Press ZOOM button during replay.
¡The screen is displayed at two magnifications with
GROUP*
(current folder
repeat)
ALL
(entire disc
repeat)
OFF
(repeat off)
* Except for Picture CD
[If Group is selected:]
Using the K/L buttons, select your desired group, and
then press B, PLAY or ENTER button to select a
track.
If you press the PLAY or ENTER button, playback of
the picture will start.
Notes on MP3, JPEG and WMA
¡Select “FIRST PLAY” and press the PLAY button,
playback from the top of the disc in the order of
tracks and groups.
¡The ninth and deeper hierarchies cannot be played.
¡The name of group and track can be displayed in up
to 25 characters. Unrecognizable characters will be
replaced with asterisks.
¡Un-reproducible groups or tracks may be displayed
depending on the recording conditions.
¡If the TITLE button is pressed when a file list is
displayed, “FIRST PLAY” will be highlighted.
3 To stop the play, press the STOP button.
Notes on Picture CD
¡A press on the STOP button will highlight the
previously displayed track on the menu screen.
Press the STOP button again or press the TITLE
button, and the menu screen displays Tracks 1 to 6,
where Track 1 is highlighted.
the pause state established.
2 Press the Arrow (K/L/s/B) button to move
the indication position.
3 For zoom mode resetting, press ZOOM
button to turn it OFF.
¡Reset Pause to regenerate the next screen.
– 22 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 23
PLAYING MP3 DISC/JPEG
DISC/WMA/PICTURE CD IN A
PROGRAMMED WAY
MP3
JPEG
WMA
Picture CD
1 Press the MODE button in STOP mode.
¡The program screen shows up.
MP3 - COLECTION
ENTER
PLAY
CLEAR
and WMA files, program setting allows 99 tracks
for combination of MP3, JPEG and WMA files.
¡If eight or more tracks have been set in a program,
the user can switch the right part of the screen with
H or G.
PLAYING AN MP3 DISC/JPEG DISC/WMA
DISC FROM A DESIRED TRACK
PROGRAM
FOLDER
MP3
WMA
JPEG
¡Up to 99 tracks can be set in a program.
¡If a disc in inserted that contains mixed MP3, JPEG
ALBUM01
ALBUM02
ALBUM03
ALBUM04
ALBUM05
ALBUM06
ALBUM07
1/3
MP3
1/1
2 Using the K/ L buttons, select a group. Then
press the ENTER button.
¡A Track selection screen appears.
press the ENTER button to save it in a
program.
¡The programmed track is displayed in the right-hand
screen.
¡If the entire program cannot be displayed at once on
the screen, “L” appears to go to the next page.
¡Pressing the s button will show a list of folders
that belong to the one-level upper hierarchy than the
currently selected folder.
PROGRAM
ENTER
PLAY
CLEAR
ALBUM01
TRACK08
TRACK09
TRACK10
TRACK11
TRACK12
TRACK13
TRACK14
TRACK11
2/3
1/1
TRACK11
¡Nothing will be displayed in the case of Picture CD.
4 When the disc has been programmed, press
the PLAY button.
¡Programmed play starts.
FILE LIST
FOLDER
MP3
WMA
JPEG
ENTER
PLAY
CLEAR
ENTER
PLAY
ALBUM01
GROUP01
GROUP02
TRACK11
TRACK12
TRACK13
TRACK14
TRACK15
1/5
TRACK11
2 Using the K/ L buttons, select a track to be
played. Then press the PLAY or ENTER
button to start playing.
Notes
¡During play, a desired track can be directly searched.
Just type in the TRACK number with the numeric
buttons.
¡If the typed TRACK number is not available, the
“disable” symbol appears and the direct search mode
is cancelled.
¡Playback cannot be started from a desired time
count.
¡Pressing the G or H button will play the next or
previous file.
¡The SEARCH button is not effective for Picture CD.
PLAYING AN MP3 DISC/JPEG DISC/WMA
DISC /PICTURE CD AT RANDOM
PROGRAM
FOLDER
MP3
WMA
JPEG
WMA
1 Press the SEARCH MODE button.
¡The SEARCH menu shows up.
3 Using the K/ L buttons, select a track. Then
FOLDER
MP3
WMA
JPEG
JPEG
ALBUM01
ALBUM05
MP3
TRACK11
TRACK81
TRACK31
TRACK22
TRACK03
TRACK53
TRACK48
TRACK49
TRACK50
TRACK51
TRACK52
TRACK53
TRACK54
2/3
2/3
JPEG
WMA
Picture CD
1 Press the MODE button twice in STOP mode.
TRACK51
RANDOM
Notes
¡Press the CLEAR button, and the last-programmed
entry will be deleted.
¡Press the RETURN button, and the STOP screen
will show up with the program contents in memory.
¡To stop programmed play, press the STOP button.
2 Press the PLAY button.
Another press on the STOP button will reset the
¡Random play starts.
subsequent information.
¡For a disc containing mixed MP3, JPEG and WMA
¡The program setting will be cancelled when the
files, random play of those files will be performed.
power is turned off or the disc tray is opened.
EN
– 23 –
COLECTION
RANDOM PROGRAM
- - no indication - -
PLAY
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 24
SETTINGS
CHANGING THE AUDIO
LANGUAGE OR SOUND MODE
DVD-A
DVD-V DVD-RW
CD
For DVD Audios
1. LPCM 5.1ch 96k / 2
VCD
This DVD player has a function which allows you to
select the desired audio language and sound mode.
2. PPCM 2.0ch 96k / 2
For DVDs
Press the AUDIO button during playback, and then press
the AUDIO button to select the desired audio language.
¡The audio language can be changed if multiple
languages are recorded on the DVD being played.
1 ENG Dolby D 5.1ch 48k/3
2 FRE Dolby D 5.1ch 48k/3
3 JPN Dolby D 5.1ch 48k/3
Notes
¡Pressing the Audio button may not work on some DVDs with
multiple audio languages (e.g. DVDs which allow audio
language setting on the disc menu). Operation varies between
discs, so refer to the manual accompanying the disc.
¡Current audio language and sound mode will be
displayed when you press the AUDIO button at first.
¡If a desired language is not shown after pressing the Audio
button several times, the disc does not have an audio source in
that language.
¡If you choose a Language that has a 3 letter language code, the
code will be displayed every time you change the Audio
language setting. If you choose any other languages, ‘---’ will
be displayed instead. (Refer to page 30.)
¡The audio language resets to the one which has been selected
in the setup mode, every time the power is turned on or discs
are replaced. If that language is not available on a disc, a
language defined by the disc is selected.
¡The screen display will disappear after about 5
seconds.
¡DTS CD does not allow the user to switch the sound mode.
¡The selected sound number is, in case of DVD Audio, displays
to number 2 normally even if there is no second sound. (The
sound number during playback remains as 1.)
Bon jour
HELLO
For Video Recording Format
For audio CDs
For discs of DVD-RW in which sound is recorded in
dual sound (bilingual) mode, the user can switch the
sound mode between the main and sub sound.
Press the AUDIO button during playback.
¡Pressing the AUDIO button cycles the sound mode
Press the AUDIO button during playback.
¡Pressing the AUDIO button cycles the sound mode
through MAIN, SUB, MAIN+SUB.
through STEREO, L-CH and R-CH.
¡The user cannot switch the sound mode when playing a
disc in which sound was not recorded in dual sound mode.
STEREO
1. MAIN
L-CH
1. SUB
R-CH
1. MAIN+SUB
– 24 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 25
¡The subtitle language resets to the one which has
CHANGING THE SUBTITLE
LANGUAGE
DVD-A DVD-RW
DVD-V
This DVD player has a function which allows you to
select the desired language for subtitles.
1 Press the SUBTITLE button during playback,
and then press the SUBTITLE button to
select the desired subtitle language.
¡The subtitle language can be changed if the subtitles
are recorded in multiple languages on the DVD
being played.
¡The subtitle language cannot be changed if the
subtitles are recorded in a single language on the
DVD being played.
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that
language is not available on a disc, a language
defined by the disc is selected.
¡It may take time to display the subtitles in the
selected language.
¡The screen display will disappear after about 5
seconds.
¡When “SUBTITLE NOT AVAILABLE” appears onscreen, it means no subtitle is recorded on the scene.
¡For DVD-RWs recorded with subtitles, select
subtitle ON or OFF.
CHANGING THE CAMERA
ANGLE (Multi-Angle Pictures)
DVD-A
DVD-V
OFF
This DVD player has a function which allows you to
select the desired camera angle.
OFF
1.ENG/6
Subtitle 1
6.FRE/6
Subtitle 6
1 Press the ANGLE button during playback.
¡If the disc contains sequences recorded from
different camera angles, the angle icon (
) will
appear at the top-right of the screen. You can change
the camera angle when the icon appears on the
screen.
¡The camera angle cannot be changed if the disc does
not contain sequences recorded from different
camera angles.
¡Pressing the SUBTITLE button cycles the subtitle
2 Press the ANGLE button while the angle
language from SUBTITLE 1, SUBTITLE 2 and all
the languages recorded.
¡Current subtitle mode will be displayed when you
press the SUBTITLE button at first.
¡Press the SUBTITLE button, and then press the
cursor (s/ B) button to set it to on or off.
number is shown on the screen.
1/8
Angle 1
2/8
Angle 2
HELLO
Bon jour
Notes
¡Some discs allow subtitle language setting on the
disc menu. (Operation varies between discs, so refer
to the manual accompanying the disc.)
¡If the desired language is not shown after pressing
the SUBTITLE button several times, the disc does
not have subtitles in that language.
¡If you choose a Language that has a 3 letter language
code, the code will be displayed every time you
change the Subtitle language setting. If you choose
any other languages, ‘---’ will be displayed instead.
(Refer to page 30.)
8/8
Angle 8
Notes
¡The screen display will disappear after about 5
seconds.
¡Current camera angle will be displayed when you
press the ANGLE button at first.
– 25 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 26
For audio CDs or Video CDs
CHANGING THE ON-SCREEN
DISPLAY
DVD-V
DVD-RW
CD
DVD-A
MP3
WMA
(1)
JPEG
Picture CD
67/89 0:00:00 - 1:23:45
TR
(Track)
TIME
(2)
67/89 0:00:00 - 1:23:45
TIME
ALL
You can check the information about the disc by
pressing the DISPLAY button on the remote control.
Program/Random Playback only (For audio CD)
PROGRAM
RANDOM
or
1 Press the DISPLAY button during playback.
¡The information screen will appear.
¡Next information screen will appear by pressing the
(1) TR
TIME
DISPLAY button repeatedly.
For DVDs
(2) ALL
(1)
67/89 0:00:00 - 1:23:45
CH
(Capter)
(2)
TIME
TIME
Either press the RETURN key or press the DISPLAY
key until the display disappears.
• Note that the time is not displayed during PBC
playback.
67/89 0:00:00 - 1:23:45
TT
(Title)
(3)
TIME
T
L1
Layer
Repeat
setting
(1) CH
Current chapter number/the number of total
chapter
TIME
Elapsed time of the current chapter and
remaining time of the current chapter
(2) TT
Current title number/the number of total titles
TIME
Elapsed time of the current title and
remaining time of the current title
(3) BIT RATE Shows the quantity of information which is
recorded in DVD Video.
Repeat
The repeat status of the currently played
item is displayed
(Not displayed if repeat has not been
selected)
Layer
Layer number
L0: Layer 0 is playing back
L1: Layer 1 is playing back
BIT RATE
Either press the RETURN key or press the DISPLAY
key until the display disappears.
For MP3s or WMAs
(1)
BIT RATE
(3)
TRACK01
File name
TRACK01
(2) TR
1/36 0:02:57
T
Repeat setting
Program/Random Playback only
PROGRAM
RANDOM
or
(1) File name Name of currently played track
Current track number/the number of total
(2) TR
tracks
TIME
Elapsed time of the current track
T ORG
BIT RATE Shows the quantity of information which is
recorded on DVD
The repeat status of the currently played
Repeat
item is displayed
(Not displayed if repeat has not been selected)
Layer number
Layer
ORG: Playing the ORIGINAL
PL: Playing the PLAYLIST
(For WMA)
(Track)
TIME
Repeat
ORG
or PL
Repeat
setting
(For MP3)
File name
For Video Recording Format
(3)
Current track number/the number of total
tracks
Elapsed time of the current track and
remaining time of the current track
Current track number/the number of total
tracks
Elapsed time of the current disc and
remaining time of the current disc
The repeat status of the currently played
item is displayed
(Not displayed if repeat has not been
selected)
T: Track; G: Group; A: All
The user can change the setting of repeat play by
pressing the REPEAT button.
Either press the RETURN key or press the DISPLAY
key until the display disappears.
– 26 –
EN
1L25
E5733UD.qxp 03.5.13 19:36 Page 27
For JPEGs or Picture CDs
(1)
PICTURE01
File name
(2)
1/25
G
Repeat setting
TR(Track)
Program/Random Playback only
PROGRAM
RANDOM
or
(1) File name Name of currently played track
(2) TR
Current track number/the number of total
tracks
Repeat
The repeat status of the currently played
item is displayed
(Not displayed if repeat has not been
selected)
T: Track; G: Group (only for JPEG); A: All
For DVD Audio
(1)
TR
(Track)
(2)
1/12 0:00:00 - 0:05:00
TIME
1/3 0:00:00 - 0:32:57
Group
TIME
Not displayed during program/random playback.
(3)
G L0
BIT
RATE
Layer
Repeat setting
Program/Random/ALL GROUP Playback only
PROGRAM
RANDOM
or
(1) TR
TIME
(2) G
TIME
(3) BITRATE
Repeat
Layer
ALL GROUP
or
Current track number/the number of total
tracks
Elapsed time of the current track and
remaining time of the current track.
Current group number /the number of total
groups
Elapsed time of the current group and
remaining time of the current group.
Show the quality of information which is
recorded in DVD Audio
The repeat state of the currently played item
is displayed (not displayed if repeat has not
been selected)
Layed number
L0: Layer 0 is playing back
L1: Layer 1 is playing back
Note
¡The bit rate shows that of the “picture” and not the “sound”.
It is not indicated for DVD audio discs for sound only.
– 27 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 28
Setting image quality
SETTING IMAGE QUALITY
ADJUSTMENT
DVD-A
VCD
DVD-RW
¡The “Image quality setting” screen appears only
DVD-V
1 Press the MODE button during playback.
¡The setup screen will appear.
when “User” has been selected in “Image quality
adjustment” on “Select image quality modes”
screen.
1. Press the s/B buttons to change the value.
2. Press the K/L buttons to switch items.
GAMMA
2 Select from items
+2
: SELECT MODE : NEXT MODE
¡Every press on the MODE button switches setting
screens in the following order:
“Disc playback” screen
+2
SHARPNESS
“NR setting” screen
: SELECT MODE : NEXT MODE
“Select image quality mode” screen
“Black level setting” screen
“Image quality setting” screen*
COLOR
+2
: SELECT MODE : NEXT MODE
* The “Image quality setting” screen appears only when
“User” has been selected in “Image quality adjustment” on
the “Select image quality mode” screen.
+2
TINT
NR setting
: SELECT MODE : NEXT MODE
Press the s/B buttons to switch the setting items.
NR
MNR
: SELECT MODE : NEXT MODE
3. Press the RETURN button to save the change.
NR
MEMORY
YES / NO
: SELECT ENTER : ENTER
BNR
: SELECT MODE : NEXT MODE
NR
Displayed only when
the value was changed.
Press the s/B buttons, and select “Yes” if you
want to save the change, and “No” if not, and then
press the ENTER button.
3DNR
: SELECT MODE : NEXT MODE
NR
OFF
: SELECT MODE : NEXT MODE
Select image quality mode
Press the s/B buttons to switch the setting items.
BLACK LEVEL
Select image quality mode
ON
: SELECT MODE : NEXT MODE
Press the s/B buttons to switch the setting items.
PICTURE CONTROL
STANDARD
: SELECT MODE : NEXT MODE
PICTURE CONTROL
BLACK LEVEL
: SELECT MODE : EXIT
OFF
CINEMA
: SELECT MODE : NEXT MODE
PICTURE CONTROL
3 Press the MODE or RETURN button.
¡This completes the setting, displaying the normal
USER
: SELECT MODE : NEXT MODE
screen.
STANDARD: A standard image quality mode
CINEMA:
The image quality mode for movie pictures
providing easy view of dark scenes.
USER:
Image quality mode that can be adjusted
freely by user setting.
– 28 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 29
CHANGING THE SETUP ITEMS
DISC MENU:
(The disc menu appears in selected language.)
LANGUAGE SETTINGS
1 Press the SETUP button in STOP mode.
LANGUAGE
¡The setup screen will appear.
QUICK
AUDIO
QUICK SETUP
ICON
ENTER
RETURN
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
LINE
ENTER
RETURN
RETURN
ICON
DISPLAY
AUDIO
PARENTAL
LANGUAGE
LANGUAGE
and then press the ENTER button.
AUDIO
PARENTAL
LINE
ORIGINAL
OAL
ENGLISH
OFF
FRENCH
ENGLISH
SPANISH
ENGLISH
GERMAN
ENTER
RETURN
RETURN
PLAYER MENU (It can be also set by QUICK SETUP):
(The on-screen display appears in selected language.)
RETURN
2 Press the s/B buttons to select CUSTOM,
DISPLAY
AUDIO
ENGLISH
4:3 LETTER BOX
ON
OFF
LINE
ICON
DISPLAY
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
DTS
LANGUAGE
PARENTAL
LANGUAGE
CUSTOM
LANGUAGE
DISPLAY
DISPLAY
AUDIO
PARENTAL
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
ENGLISH
FRANÇAIS
ESPAÑOL
PARENTAL
ICON
LINE
ENTER
RETURN
ICON
RETURN
LINE
ENTER
RETURN
RETURN
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
5 Press the K/ L buttons to select a desired
LINE
ICON
ENTER
RETURN
item, and then press the ENTER button.
¡If “OTHER” is selected on the AUDIO, SUBTITLE
RETURN
or DISC MENU setting screen, the Language Code
setting screen will appear. Press the numeric buttons
to enter the desired language code while referring to
the list on page 30.
3 Press the s/B buttons to select Language,
and then press the ENTER button.
LANGUAGE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
DISPLAY
AUDIO
PARENTAL
LANGUAGE
Please enter a 4-digit language code.
ICON
LINE
ENTER
RETURN
RETURN
CLEAR
CLEAR
RETURN
RETURN
4 Press the K/ L buttons to select an item, and
then press the ENTER button.
6 Press the SETUP button.
¡The setup mode will be cancelled and the ordinary
AUDIO:
(Voice is played back in selected language.)
LANGUAGE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
ICON
LINE
AUDIO
screen will appear.
PARENTAL
LANGUAGE
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
DISPLAY
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTER
RETURN
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
RETURN
ICON
LINE
ORIGINAL
OAL
ENGLISH
OFF
FRENCH
ENGLISH
SPANISH
ENGLISH
GERMAN
ENTER
RETURN
RETURN
Note
¡Language Setting for Audio and Subtitle is not
available with some discs. Use the Audio and
Subtitle buttons. Details are on pages 24 and 25.
SUBTITLE:
(Subtitles are shown in selected language.)
LANGUAGE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ICON
LINE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
ORIGINAL
OFF
ENGLISH
ENGLISH
ENTER
RETURN
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
RETURN
ICON
LINE
OFF
ORIGINAL
ENGLISH
OFF
FRENCH
ENGLISH
SPANISH
ENGLISH
GERMAN
ENTER
RETURN
RETURN
– 29 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 30
LANGUAGE CODE LIST
Language
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali;Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish [DAN]
German [GER]
Bhutani
Greek [GRE]
English [ENG]
Esperanto
Spanish [SPA]
Estonian
Basque
Persian
Finnish [FIN]
Fiji
Faroese
French [FRE]
Frisian
Irish [IRI]
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian [HUN]
Armenian
Country code
Language
Country code
Language
Country code
4747
4748
4752
4759
4764
4765
4771
4772
4847
4851
4853
4854
4855
4860
4861
4864
4947
4961
4965
4971
5047
5051
5072
5158
5160
5161
5165
5166
5167
5247
5255
5256
5261
5264
5271
5347
5350
5358
5360
5367
5447
5455
5464
5467
5471
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic [ICE]
Italian [ITA]
Hebrew
Japanese
Yiddish
Japanese [JPN]
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean [KOR]
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian;Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch [DUT]
Norwegian [NOR]
Occitan
(Afan)Oromo
Oriya
Panjabi
Polish
Pashto;Pushto
Portuguese [POR]
5547
5551
5557
5560
5565
5566
5569
5647
5655
5669
5747
5757
5758
5759
5760
5761
5765
5767
5771
5847
5860
5861
5866
5868
5953
5955
5957
5958
5960
5961
5964
5965
5966
5971
6047
6051
6058
6061
6149
6159
6164
6247
6258
6265
6266
Quechua
Rhaeto-Romance
Kirundi
Romanian [RUM]
Russian [RUS]
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswat
Sesotho
Sundanese
Swedish [SWE]
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish [TUR]
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Wolof
Xhosa
Yoruba
Chinese [CHI]
Zulu
6367
6459
6460
6461
6467
6469
6547
6550
6553
6554
6555
6557
6558
6559
6560
6561
6563
6564
6565
6566
6567
6568
6569
6647
6651
6653
6654
6655
6657
6658
6660
6661
6664
6665
6666
6669
6757
6764
6772
6855
6861
6961
7054
7161
7254
7267
If you choose a Language that has a 3 letter language code, the code will be displayed every time you change
the Audio or Subtitle language setting on pages 24 and 25. If you choose any other languages, ‘---’ will be
displayed instead. (3 letter language code is written in bracket.)
– 30 –
EN
1L25
E5733UD.qxp 03.5.12 3:01 PM Page 31
DISPLAY SETTINGS
DISPLAY
LANGUAGE
AUDIO
¡The setup screen will appear.
QUICK
ICON
AUDIO
PARENTAL
DISPLAY
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
1 Press the SETUP button in STOP mode.
DISPLAY
LANGUAGE
PARENTAL
DISPLAY
LINE
4:3LETTER BOX
STANDARD
OFF
BRIGHT
ON
ON
BLUE
ENTER
RETURN
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
RETURN
ICON
LINE
4:3LETTER BOX
STANDARD
OFF
OFF
MNR
BRIGHT
ON
OFF
3DNR
ON
BLUE
ENTER
RETURN
RETURN
CUSTOM
PANEL DISPLAY (Default : BRIGHT)
Adjust the brightness of the unit’s display.
Auto: Stays dim only during playback.
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
ON
OFF
LINE
ICON
ENTER
RETURN
RETURN
DISPLAY
LANGUAGE
2 Press the s/B buttons to select CUSTOM,
DISPLAY
AUDIO
PARENTAL
LANGUAGE
PARENTAL
ICON
DISPLAY
AUDIO
PARENTAL
DISPLAY
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
and then press the ENTER button.
LANGUAGE
AUDIO
DISPLAY
LINE
4:3LETTER BOX
STANDARD
OFF
BRIGHT
OFF
ON
BLUE
ENTER
RETURN
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
RETURN
ICON
4:3LETTER BOX
STANDARD
OFF
BRIGHT
BRIGHT
DIMMER
OFF
AUTO
ON
BLUE
LINE
ENTER
AUDIO
PARENTAL
RETURN
RETURN
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
LINE
ICON
ENTER
RETURN
ANGLE ICON (Default : ON)
Display the Angle icon on the screen.
RETURN
3 Press the s/ B buttons to select DISPLAY
and then press the ENTER button.
DISPLAY
LANGUAGE
AUDIO
DISPLAY
LANGUAGE
AUDIO
PARENTAL
LANGUAGE
DISPLAY
DISPLAY
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
PARENTAL
DISPLAY
4:3LETTER BOX
STANDARD
OFF
BRIGHT
ON
ON
BLUE
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
4:3LETTER BOX
STANDARD
OFF
BRIGHT
OFF
ON
BLUE
DISPLAY
ICON
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
ICON
LINE
4:3LETTER BOX
STANDARD
OFF
BRIGHT
ON
ON
BLUE
ENTER
RETURN
LINE
ENTER
RETURN
RETURN
ICON
LINE
ENTER
RETURN
RETURN
ON SCREEN INFO (Default: ON)
Displays the play-back mark, etc. on the screen.
RETURN
4 Press the K/ L buttons to select an item, and
DISPLAY
LANGUAGE
AUDIO
PARENTAL
LANGUAGE
DISPLAY
AUDIO
PARENTAL
then press the ENTER button.
TV ASPECT (Default : 4:3 LETTER BOX)
(It can be also set by QUICK SETUP)
4:3 LETTER BOX: Wide screen with black bars on
top and bottom
4:3 PAN & SCAN: Full height picture, trimmed both sides
16:9 WIDE : If wide screen TV is connected
16:9 NORMAL : When the product is connected to a
wide-screen television set, replay pictures are
displayed in full screen without being expanded
horizontally or without a black horizontal band
appearing on the screen.
DISPLAY
DISPLAY
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
ICON
LINE
4:3LETTER BOX
STANDARD
OFF
BRIGHT
OFF
ON
BLUE
ENTER
RETURN
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
RETURN
ICON
LINE
4:3LETTER BOX
STANDARD
OFF
BRIGHT
OFF
OFF
BLUE
ENTER
RETURN
RETURN
BACKGROUND COLOR (Default : BLUE)
Select blue or gray.
LANGUAGE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
DISPLAY
DISPLAY
AUDIO
PARENTAL
DISPLAY
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
4:3LETTER BOX
STANDARD
OFF
BRIGHT
ON
ON
BLUE
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
4:3LETTER BOX
STANDARD
OFF
BRIGHT
ON
K
ON
BLUE
BLUE
L
LANGUAGE
DISPLAY
AUDIO
LANGUAGE
PARENTAL
AUDIO
ICON
PARENTAL
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
LINE
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
4:3LETTER BOX
STANDARD
OFF
BRIGHT
ON
ON
BLUE
ENTER
RETURN
ICON
RETURN
LINE
4:3 LETTER BOX
4:3LETTER
BOX
4:3PAN & SCAN
STANDARD
16:9 WIDE
OFF
16:9 NORMAL
BRIGHT
ON
ON
BLUE
ENTER
RETURN
DISPLAY
AUDIO
LANGUAGE
PARENTAL
RETURN
RETURN
ICON
LINE
ENTER
RETURN
RETURN
CONTROL, NR or PANEL DISPLAY or
BACKBROUND COLOR)
Press the K/ L buttons to select a desired
item, and then press the ENTER button.
(If you selected ANGLE ICON or ON
SCREEN INFO)
Press the ENTER button.
DISPLAY
AUDIO
PARENTAL
DISPLAY
DISPLAY
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
ICON
ENTER
5 (If you selected TV ASPECT, PICTURE
RETURN
PICTURE CONTROL (Default: STANDARD)
Sets the image to display, to an easy-to-see status.
LANGUAGE
LINE
DISPLAY
DISPLAY
ICON
DISPLAY
LINE
4:3LETTER BOX
STANDARD
OFF
BRIGHT
OFF
ON
BLUE
ENTER
RETURN
RETURN
TV ASPECT
PICTURE CONTROL
NR
PANEL DISPLAY
ANGLE ICON
ON SCREEN INFO
BACKGROUND
ICON
LINE
STANDARD BOX
4:3LETTER
CINEMA
STANDARD
USER
OFF
USER EDIT
BRIGHT
OFF
ON
BLUE
ENTER
RETURN
RETURN
NR (noise reduction) (Default: OFF)
OFF: Plays back without compensation.
MNR: Reduces the mosquito noise (noise generated
at profile of image during MPEG compression).
BNR: Reduces the block noise.
3DNR: Reduce the stirring and twinkling of the screen.
6 Press the SETUP button.
¡The setup mode will be cancelled and the ordinary
screen will appear.
Note
¡Selecting a different mode is only effective if it is
available on the Disc.
– 31 –
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 32
AUDIO SETTINGS
LANGUAGE
DISPLAY
AUDIO
LANGUAGE
PARENTAL
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
¡The setup screen will appear.
ICON
QUICK
PARENTAL
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
OFF
ON
OFF
ON
OFF
2CH
LINE
ENTER
RETURN
ICON
RETURN
LINE
OFF
ON
ON
ON
OFF
2CH
ENTER
RETURN
RETURN
CUSTOM
Down Sampling (Default : ON)
Set the output for the DVD recorded in PCM 96kHz
(96kHz or 48kHz)
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
DTS
ENGLISH
4:3 LETTER BOX
ON
OFF
LINE
ICON
ENTER
RETURN
RETURN
LANGUAGE
DISPLAY
AUDIO
PARENTAL
LANGUAGE
AUDIO
the
LANGUAGE
DISPLAY
AUDIO
PARENTAL
ICON
DISPLAY
AUDIO
PARENTAL
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
2 Press the s/B buttons to select CUSTOM,
and then press
ENTER button.
AUDIO
AUDIO
AUDIO
1 Press the SETUP button in STOP mode.
DISPLAY
OFF
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
ON
OFF
ON
OFF
2CH
LINE
ENTER
RETURN
RETURN
ICON
LINE
OFF
ON
OFF
OFF
OFF
2CH
ENTER
RETURN
RETURN
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ORIGINAL
OFF
ENGLISH
ENGLISH
LINE
ICON
ENTER
RETURN
When playing a disc with copyright protection
¡If you select ON, copyright protection will be
activated and no sound will come out. If you select
OFF, sound will be down sampled at 48kHz.
RETURN
3 Press the s/ B buttons to select AUDIO and
then press the ENTER
button.
DISPLAY
LANGUAGE
AUDIO
PARENTAL
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
D2 audio (Default : OFF)
Sets the output/non-output of sound when the playback
speed is x2.
OFF
ON
OFF
DISPLAY
LANGUAGE
AUDIO
PARENTAL
LANGUAGE
AUDIO
PARENTAL
OFF
AUDIO
LINE
ICON
DISPLAY
ON
2CH
ENTER
RETURN
RETURN
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
4 Press the K/ L buttons to select an item, and
ICON
LINE
OFF
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
ON
OFF
ON
OFF
2CH
ENTER
RETURN
RETURN
ICON
LINE
OFF
ON
OFF
ON
ON
2CH
ENTER
RETURN
RETURN
then press the ENTER button.
DRC (Default : OFF)
ON : DRC (Dynamic Range Control)
¡This function is for controlling the range of sound volume.
By compressing the range of sound volume, it is possible
not only to suppress the output of loud sound at night and
but also to raise the volume of low sound.
¡This function is effective only for the sound
recorded by Dolby Digital recording.
LANGUAGE
DISPLAY
AUDIO
LANGUAGE
DISPLAY
AUDIO
LINE
OFF
OFF
ON
OFF
2CH
ENTER
RETURN
RETURN
AUDIO
PARENTAL
LINE
ICON
LANGUAGE
DISPLAY
LINE
OFF
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
ON
OFF
ON
OFF
2CH
ENTER
RETURN
RETURN
ICON
AUDIO
LANGUAGE
PARENTAL
LINE
DISPLAY
AUDIO
PARENTAL
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
ON
ON
OFF
ON
OFF
2CH
ENTER
RETURN
ICON
RETURN
LINE
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
OFF
ON
OFF
ON
OFF
2CH
ENTER
RETURN
ICON
RETURN
LINE
OFF
ON
OFF
ON
OFF
2CH
5.1CH
ENTER
RETURN
RETURN
When 5.1 ch is selected
In order to attain a good surround effect, set the distance to
the connected speaker.
L buttons to select an item, and then press
¡Press the K/L
the ENTER button.
SPEAKER SIZE: Set the size of the speaker to connect.
DELAY TIME: Set the delay time output from the
listening position.
BALANCE:
Set the output level of the connecting speaker.
PARENTAL
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
DISPLAY
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
ON
AUDIO
ICON
5.1 ch:
Select this when it is connected to the
AUDIO OUT (L/R) terminal.
Select this when it is connected to the 5.1
CH OUTPUT terminal
PARENTAL
Dolby Digital (default: ON)
(It can be set by QUICK SETUP)
ON: Output by Dolby Digital
Set to On when the unit is connected to Dolby Digital Decoder.
DISPLAY
2 ch:
AUDIO
DRC
DOLBY DIGITAL
DTS
DOWN SAMPLING
D2 AUDIO
SPEAKER
LANGUAGE
L buttons to select an item, and then press
¡Press the K/L
the ENTER button.
LANGUAGE
PARENTAL
AUDIO
ICON
SPEAKER (Default:2ch)
This is to be set when it is connected to the 5.1 channel
analog input terminal of AV amplifier.
OFF
OFF
OFF
ON
OFF
2CH
ENTER
RETURN
LANGUAGE
RETURN
DTS (Default: OFF)(It can be also set by QUICK SETUP)
ON : Selected when the DTS decoder is connected digitally to the
amplifier installed.
OFF : Selected when the DTS decoder is connected to the amplifier
incompatible to the DTS. In this case, the DTS track is not output.
– 32 –
DISPLAY
AUDIO
PARENTAL
AUDIO 5.1CH
SPEAKER SIZE
DELAY TIME
BALANCE
ICON
LINE
ENTER
RETURN
RETURN
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 33
SPEAKER SIZE
Select the speaker to set by
pressing o/p buttons, then press
the ENTER button.
DELAY TIME
DISPLAY
LANGUAGE
AUDIO
PARENTAL
LANGUAGE
AUDIO 5.1CH SPEAKER SIZE
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
ICON
LINE
LARGE
LARGE
ON
LARGE
ENTER
RETURN
DISPLAY
CENTER
SURROUND
Select the size of the speaker by pressing o/p buttons,
then press the ENTER button.
LARGE: Select this when the connected speaker is
capable of playing back sounds of 100Hz
or less.
SMALL: Select this when the connected speaker is
not capable of playing back sounds of
100Hz or less.
OFF:
Select this when it is not connected. (It
cannot be set OFF on the FRONT speaker)
ON:
Select this when SUB WOOFER is
connected.
DISPLAY
AUDIO
LANGUAGE
PARENTAL
DISPLAY
AUDIO
AUDIO 5.1CH SPEAKER SIZE
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
ICON
LINE
LARGE
SMALLGE
SMALL
ON
LARGE
ENTER
RETURN
ICON
RETURN
LINE
RETURN
DISPLAY
AUDIO
LANGUAGE
PARENTAL
DISPLAY
AUDIO
AUDIO 5.1CH SPEAKER SIZE
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
ICON
LINE
LARGE
LARGE
OFF
LARGE
ENTER
RETURN
RETURN
ICON
LINE
LANGUAGE
RETURN
LARGE
SMALLGE
LARGE
ON
SMALL
LARGE
OFF
ENTER
RETURN
RETURN
Distance
about 34cm
about 69cm
about 103cm
about 137cm
about 172cm
SURROUND
DISPLAY
AUDIO
CENTER
SURROUND
FRONT(L/R)
CENTER
SUB WOOFER
SURROUND(L/R)
RETURN
Set value
5ms
10ms
15ms
PARENTAL
AUDIO 5.1CH SPEAKER SIZE
ENTER
CENTER
AUDIO 5.1CH
LANGUAGE
LINE
Set value
1ms
2ms
3ms
4ms
5ms
LARGE
SMALLGE
SMALL
ON OFF
LARGE
ENTER
0 ms
5 ms
Select the speaker to set by pressing o/p buttons, then
press the ENTER button.
Select the delay time by pressing o/p buttons, then
press the ENTER button.
PARENTAL
AUDIO 5.1CH SPEAKER SIZE
PARENTAL
DELAY TIME
RETURN
ICON
LANGUAGE
AUDIO
AUDIO 5.1CH
ICON
RETURN
Note
¡The speaker size of the FRONT speaker is
determined automatically by setting the SUB
WOOFER. When SUB WOOFER is not connected,
it is recommended to connect a front speaker
capable of playing back low tones of 100Hz or
below.
¡At playback of DVD Audio, the sound may not
come out as set due to restrictions in the disc or the
player.
LINE
Distance
about 172cm
about 343cm
about 515cm
PARENTAL
LANGUAGE
DELAY TIME
AUDIO
AUDIO 5.1CH
0 ms
2
5 ms
ENTER
DISPLAY
CENTER
SURROUND
RETURN
RETURN
ICON
LINE
PARENTAL
DELAY TIME
0 ms
5 ms
ENTER
RETURN
RETURN
Note
¡It is not possible to adjust this item if CENTER and
SURROUND have been set to OFF in the
SPEAKER SIZE setting.
– 33 –
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 34
BALANCE
When the volume level differs from each speaker,
adjustment can be made in the unit of dB, from -12 dB
to 0 dB.
Select the speaker to set by pressing o/p buttons, then
press the ENTER button
Select the volume level by pressing o/p buttons, then
press the ENTER button
¡TEST: The test tone is output in clockwise from
FRONT (L).
LANGUAGE
DISPLAY
AUDIO
PARENTAL
ABOUT A DELAY TIME
The delay effect is given to a voice output from a
center speaker and a surround speaker, and the ideal
viewing-and-listening position is discovered virtually.
As for a speaker, it is ideal to be arranged on a circle,
as shown in the following figure.
However, such arrangement may not be able to be
performed depending on your place.
It is possible to set up a delay time from the difference
in the position of an ideal speaker and the position of
an actual speaker.
AUDIO
TEST
FRONT(L)
CENTER
FRONT(R)
SUB WOOFER
SURROUND(L)
SURROUND(R)
ICON
LINE
The ideal position of the center speaker
OFF
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
ENTER
RETURN
RETURN
Distance A
¡Selecting respective speakers outputs the test tone at
(L)
Center
Speaker
the volume presently set.
LANGUAGE
DISPLAY
AUDIO
PARENTAL
Distance C
(R)
Distance F
AUDIO
TEST
FRONT(L)
CENTER
FRONT(R)
SUB WOOFER
SURROUND(L)
SURROUND(R)
ICON
LINE
OFF
0 dB
0ddB
B
0
0 dB
0 dB
0 dB
0 dB
ENTER
RETURN
The position to which it watches
and listens
Distance S
Surround (L)
RETURN
SubWoofer
Surround(R)
Note
Distance B
¡When TEST is selected and the test tone is being
output, balance adjustment cannot be made.
The ideal position of the
surround speaker
¡When TEST is selected, no test tone will be output
from SUBWOOFER.
¡It is not possible to adjust this item for the speaker Distance A = Distance F - Distance C
that has been set to OFF in SPEAKER SIZE setting. Distance B = Distance F - Distance S
5 Press the SETUP button.
¡The setup mode will be cancelled and the ordinary
screen will appear.
We are making the plan so that a user may set up
Distance A and B.
– 34 –
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 35
When “PARENTAL LEVEL” is selected
¡Press the K/ L buttons to select an item from “ALL”
PARENTAL LOCK
or 8 to 1 and then press the ENTER button.
ALL
All parental lock is cancelled.
1 Press the SETUP button in STOP mode.
Level 8
¡The setup screen will appear.
DVD software of any grade (adult/general/children)
can be played back.
Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
Level 1
Only DVD software intended for children can be
2 Press the s/B buttons to select CUSTOM, played back, with those intended for adult and
general use prohibited.
and then press the ENTER button.
DVD-V
QUICK
CUSTOM
QUICK SETUP
PLAYER MENU
TV ASPECT
DOLBY DIGITAL
DTS
LANGUAGE
ENGLISH
4:3 LETTER BOX
ON
OFF
ICON
LINE
ENTER
DISPLAY
AUDIO
PARENTAL
RETURN
RETURN
LANGUAGE
AUDIO
PARENTAL
PARENTAL
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
PLAYER MENU
ICON
DISPLAY
PARENTAL LEVEL
CHANGE
ORIGINAL
OFF
ENGLISH
ENGLISH
LINE
ENTER
RETURN
ICON
RETURN
LINE
ALL
ALL
8
7 [NC-17]
6 [R]
5
ENTER
RETURN
RETURN
When “CHANGE” is selected
3 Press the s/ B buttons to select
¡Press the numeric buttons to enter the 4 digits
password. Then press the ENTER button.
PARENTAL, and then press the ENTER
button.
LANGUAGE
DISPLAY
AUDIO
LANGUAGE
DISPLAY
AUDIO
PARENTAL
PARENTAL
PARENTAL
Please enter a 4-digit password.
PARENTAL
PARENTAL LEVEL
ALL
1
1
1
1
Don' t forget the password.
Press 'ENTER' to activate password.
CLEAR
ICON
LINE
ENTER
RETURN
CLEAR
RETURN
RETURN
RETURN
4 Press the numeric buttons to enter the 4digit password, and then press the ENTER
button.
6 Press the SETUP button.
¡The setup mode will be cancelled and the ordinary
screen will appear.
Notes
¡When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the ¡With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
password from the second time onward.
if the parental lock function operates in the way that
¡By entering the password, you can then change the
you have set.
control level and password settings.
¡Record the password in case you forget it.
LANGUAGE
DISPLAY
AUDIO
PARENTAL
IF YOU FORGET THE PASSWORD
PARENTAL
1) Press the 4, 7, 3, 7 at step 4.
¡Password will be cleared and parental level will be
set to ALL.
2) Proceed the above steps 4-6 again.
Please enter a 4-digit password.
CLEAR
CLEAR
RETURN
RETURN
5 Press the K/ L buttons to select an item, and
then press the ENTER button.
LANGUAGE
DISPLAY
AUDIO
PARENTAL
PARENTAL
PARENTAL LEVEL
CHANGE
ICON
LINE
ALL
ENTER
RETURN
RETURN
– 35 –
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 36
TROUBLESHOOTING GUIDE
If the DVD player does not perform properly when operated as instructed in this Owner's Manual, check the
player, consulting the following checklist.
Symptom
Remedy
Cause
¡Loose power plug.
¡Insert the power plug firmly into the wall outlet.
No power
¡The remote control is not aimed ¡Aim the remote control directly at the sensor on
at the sensor on the player.
the player.
¡Remove the obstacles from the signal path.
The player does not ¡Obstacles present between the
remote control and the sensor.
respond to the
¡The remote control is too far
¡Use the remote control within 23 feet of the
remote control.
away from the player.
player.
¡Dead batteries.
¡Replace the batteries.
¡Loose video connection.
¡Connect the video cables firmly.
¡Wrong disc.
¡Insert a correct video disc that plays on this player.
No picture
¡Progressive switching is not set ¡Set the switch to the correct position according
correctly.
to the television settings.
¡No disc.
¡Insert a disc.
¡Dirty disc.
¡Clean the disc.
Disc cannot be
¡Disc is placed upside down.
¡Place the disc correctly, with the label side up.
played
¡Parental lock is active.
¡Cancel the parental lock or change the control level.
¡Connect the audio cables firmly.
¡Loose audio connection.
¡Turn the power of the audio component on.
¡The power of the connected
audio component is off.
¡Correct the audio output settings.
¡Wrong audio output settings.
No sound
¡Correct the input settings on the audio
¡Wrong input settings on the
component.
connected audio component.
¡The analog output terminal does not supply
¡DTS sound is being output.
DTS sound.
¡Connect the player directly to the TV.
¡Copy protection is active.
¡Immediately after playing, press ¡There are some cases where pictures may be
slightly distorted, which are not a sign of a
fast forward or in reverse.
Distorted picture
malfunction.
¡The 1st layer is switching to the
2nd layer, when playing a two
¡Although Pictures may stop for a moment, this
is not a malfunction and is quite common.
layered disc.
¡No malfunction.
¡The selected language is not
Audio or subtitle
available for audio or subtitles
language does not
on the DVD.
match the setup.
¡No malfunction.
¡The DVD does not contain
The camera angle
audio source or subtitles in the
cannot be changed.
selected language.
¡No malfunction.
¡The DVD does not contain
Audio or subtitle
sequences recorded from
language cannot be
different camera angles.
changed.
“Prohibited icon”
¡That operation is prohibited by ¡No malfunction.
appears on the
the player or disc.
screen, prohibiting
an operation.
¡Some discs in the DVD audio output ¡No malfunction.
A sound different
sound different from the sound value
from the value set
previously set in SETUP.
in SETUP is output.
Replay cannot be
¡The copyright protection system ¡No malfunction.
conducted as a
is now at work.
"COPYRIGHT LOCK"
message displayed.
Notes
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this
Owner’s Manual for details on correct operations.
¡Playback from a desired track and random playback are not available during program playback.
EN
– 36 –
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 37
HANDLING PRECAUTIONS
Servicing
Should your DVD player become inoperable, do not try to correct the problem by yourself. There
are no user-serviceable parts inside. Turn the power off, unplug the power cord, and please call our
help line at 1-800-332-2119 to locate an Authorized Service Center.
Cabinet Cleaning
• Wipe the front panel and other exterior surfaces of the DVD player with a soft cloth immersed in
lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray any type of liquid near the DVD player. Certain
chemicals may cause damage and discoloration to the exposed surfaces.
If the Laser Optical Pickup Unit is Dirty
• If the player still does not perform properly when it is operated and you have referred to the
relevant sections and to the “Troubleshooting Guide” for help, the laser optical pickup unit
may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of
the laser optical pickup unit.
Adhesive labels
Discs that are irregularly shaped, contain a scratch protection film or have an adhesive paper label or
sticker should not be inserted into this player.
Over time, the label or sticker may cause the disc to be stuck in the player, possibly causing damage
to your player.
If you wish to play "homemade" discs in this player, it is recommended you use a permanent felt tip
marker to identify the disc.
NEVER ATTEMPT TO PLAYBACK A DISC THAT IS CRACKED OR BROKEN !
– 37 –
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 38
HANDLING PRECAUTIONS (continued)
Disc Handling
• Use discs which have the following logos on them.
• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
• Always store the disc in its protective case when it is not used.
• To clean-off, use a soft cloth.
• Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
• Never wipe in a circular motion.
• Do not use detergent or abrasive cleansing agents.
– 38 –
EN
1L25
E5733UD.qxp 03.5.13 19:43 Page 39
SPECIFICATIONS
Product type :
DVD Player
Discs :
DVD Video
DVD Audio
Audio CD
Video CD
Output signal format :
NTSC color
Frequency response :
20 Hz to 22 kHz (sample rate: 48 kHz)
20 Hz to 44 kHz (sample rate: 96 kHz)
20 Hz to 88 kHz (sample rate: 192 kHz)
Signal-to-noise ratio (S/N ratio)
CD:
120 dB (JEITA)
Dynamic range:
DVD (linear sound): 102 dB, CD: 99 dB (JEITA)
Total harmonic distortion
DVD: 0.0025%, CD: 0.003%
Wow and flutter :
Below the measurement limitation (+/-0.001% W PEAK) (JEITA)
Connections
S-Video output :
Video output :
Coaxial digital audio output :
Analog audio output
(2CH surround):
Analog audio output
(5.1CH surround):
Component video output :
Optical digital audio output :
Mini DIN 4-pin jack (75 ohm)
One RCA connector, 1 Vpp (75 ohm)
One pin jack, 500mVpp (75 ohm)
Two RCA connectors (one left channel, one right channel) 2Vrms (100kilo-ohm)
Six pin jacks, 2Vrms (100kilo-ohm)
One pin jack (Y), 1 Vpp (75 ohm) Two pin jacks (Pb/Cb)(Pr/Cr), 700mVpp (75 ohm)
Optical connector
Power source :
120 V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption :
16 W (standby: 3.9 W)
Operating temperature :
41°F to 104°F
Dimensions :
W 17-1/8” (435mm)
H 2-3/16” (55mm)
D 8-5/16” (211mm)
Weight :
4.3 lbs (1.95kg)
¡Designs and specifications are subject to change without notice.
– 39 –
EN
1L25
E5733UD.qxp 03.5.12 3:02 PM Page 40
MITSUBISHI DVD Player
LIMITED WARRANTY
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. (“MDEA”) warrants to the original purchaser of this DVD player if purchased from an authorized
MITSUBISHI Audio/Video Dealer that, should it prove defective by reason of improper workmanship and/or material:
a. Parts. For one year from the date of original purchase at retail, we will repair or replace, at our option, any defective part without charge for the part.
All parts used for replacement are warranted for the remainder of the original warranty period.
b.Labor. For six months from the date of original purchase at retail, we will provide the labor for a warranty repair by an authorized MITSUBISHI service center
without charge.
c. Notice. To obtain warranty service, you must notify an authorized MITSUBISHI service center of any defect within the applicable warranty time period.
1. TO OBTAIN WARRANTY SERVICE DURING THE FIRST YEAR:
a. Contact your nearest authorized MITSUBISHI service center, whose name and address can be obtained from your MITSUBISHI dealer or by writing or calling
MDEA at the address and telephone number provided below.
b. Warranty service will be provided at an authorized service shop, provided that your DVD player is located within the geographic territory customarily covered
by an authorized MITSUBISHI service center. If not, you must either deliver your DVD player to an authorized service location at your own expense, or pay for
any travel and/or transportation costs the service center may charge to and from your home. Actual service labor will be provided without charge.
c. Proof of purchase date from an authorized MITSUBISHI Dealer is required when requesting warranty service. Present your sales receipt or other document
which establishes proof and date of purchase. THE RETURN OF THE OWNER REGISTRATION CARD IS NOT A CONDITION OF WARRANTY
COVERAGE. However, please return the Owner Registration Card so that we can contact you should a question of safety arise which could affect you.
2. THIS WARRANTY DOES NOT COVER damage caused by: modification, alteration, repair or service of this product by anyone other than an authorized
MITSUBISHI service center; physical abuse to, or misuse of, the product; operation in a manner contrary to the instructions which accompany the product; freight
damage; or any damage caused by acts of God such as lightning or fluctuation in electrical power. This warranty also excludes all costs arising from installation,
adjustment of user controls, external antenna systems, service of products purchased or serviced outside the U.S.A., initial technical adjustments (setup) and userrequired maintenance. Consult the operating instructions furnished with the product for information regarding user controls.
3. ANY EXPRESS WARRANTY NOT PROVIDED HEREIN, AND ANY REMEDY WHICH, BUT FOR THIS PROVISION, MIGHT ARISE BY
IMPLICATION OR OPERATION OF LAW, IS HEREBY EXCLUDED AND DISCLAIMED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
OF FITNESS FOR ANY PARTICULAR PURPOSE ARE EXPRESSLY LIMITED TO A TERM OF ONE YEAR.
4. UNDER NO CIRCUMSTANCES SHALL MDEA BE LIABLE TO PURCHASER OR ANY OTHER PERSON FOR ANY INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, OR OTHERWISE.
5. Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental, special, or consequential damages, so
the above limitations or exclusions may not apply to you.
6. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
7. BEFORE REQUESTING SERVICE, please review the instruction booklet to ensure proper installation and correct customer control adjustment. If the problem
persists, contact your nearest MITSUBISHI Dealer for name(s) of authorized MITSUBISHI Service Center(s). If you are unable to obtain this information, please
call 1-800-332-2119, or write us at the address below.
MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.
9351 Jeronimo Road
Irvine, CA 92618-1904
RETAIN THIS PORTION FOR YOUR RECORDS
SERIAL NO.
CUSTOMER NAME
STREET ADDRESS
CITY
PHONE (
STATE
)
ZIP
/
PURCHASE DATE
MO
/
DAY YR
PLACE OF PURCHASE
© 2003 Mitsubishi Digital Electronics America, Inc.
Printed in China
0VMN03768
E5733UD ★★★★★