Sharp LC-32SB24U Operating instructions

SHARP
LC-32SB24U
LC--37SB24U
LiQUiD CRYSTAL
TELEVISION
_O_
DDjDOLBYJ
JJ,_ _3
D i G | T A L
..................................
1245
IMPORTANT
rr_
| '_
: before
Please starting
read thisoperating
operation the
manual
equipment.
NYCE
Supplied
Accessories
Make sure the following accessories
,f
are provkJed with the product.
LC 32SB24U
Lo37sBg4u
_
"'"
Remote control unit
(:_1)
Page 7
,.
"AA" size battery
(x2)
Page 8
AC cord
(xl)
Page 7
Cableclamp
(xl)
Page 7
'"'
Stand unit
(xl)
Page6
F--]
Operation manual
(x 3 languages)
J
= Abvaysusethe AC cord supplied with the TV.
To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved
cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH)
or triple (00Z-LCDCL©TH-3 packs. Ca 1-800-BE-SHARP for order ng, or V S T www.sharpusa.com/SharpD
rect.
1
IMPORTANq_
To aid reporting in case of loss or theft, please record
I Model No.:
the TV's model and serial numbers in the space
Serial No.:
provided. The numbers are located at the rear of the TV.
IMPORTANT
WARNING:
INFORMATION
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
RISK OF ELECTRIC
DO NOT OPEN
SHOCK
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation
point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying
the
product.
CAUTION:
TO PREVENT ELECTRIC SHOCK,
SLOT, FULLY INSERT.
MATCH WIDE BLADE OF PLUG TO WIDE
CAUTION:
DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD,
BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS
PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY
WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY
THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE
MANUFACTURER'S
INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND
USE MOUNTING ACCESSORIES RECOMMENDED
BY THE MANUFACTURER.
A PRODUCT AND CART COMBINATION SHOULD BE MOVED WITH CARE.
QUICK STOPS, EXCESSIVE FORCE, AND UNEVEN SURFACES MAY CAUSE
THE PRODUCT AND CART COMBINATION TO OVERTURN.
WARNING:
FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic
interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.
Printed in Mexico
TINS-D600WJZZ
08P03-MX-NM
IMPORTANT INFORMATION
DECLARATION OF CONFORMITY=
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-32SB24U/LC-37SB24U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
TEL: 1-800-BE-SHARP
For Business Customers: URL http://www.sharpusa.com
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
)ursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--
Consult
the dealer or an experienced
radio/TV
technician
"Note
to CATV system
installer:
This reminder
is provided
to call the
National
Electrical
Code that
provides
guidelines
for proper
grounding
be connected
to the
grounding
system
of the
building,
as close
CATV
and,
to the
point
for help.
system
installer's
attention
to Article
in particular,
specifies
that the cable
of cable
entry
as
820-40
ground
of the
shall
practical."
This product utilizes tin-lead solder, and fluorescent
lamp
containing
a small amount of mercury. Disposal of these
materials may be regulated due to environmental
considerations.
For disposal or recycling information,
please contact your local
authorities,
the Electronic Industries Alliance: www.eiae.org,
the
lamp recycling organization:
www.lamprecycle.org
or
Sharp at 1-800-BE-SHARP
(For U.S.A. only)
Trademarks
. Dolby
Manufactured
Laboratories.
under license from Dolby Laboratories. "Dolby '_and the double-D symbol are trademarks of
I
. HDMI
"HDMI,Licensing
the HDMILLC."
logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
I
, energy
Productsefficiency.
that have earned the ENERGY STAR_ are designed to protect the environment through superior
I
DEAR SHARP CUSTOMER
Thank you for your purchase
of the Sharp
of trouble-free
operation
of your product,
using this product.
IMPORTANT
Liquid
please
SAFETY
Crystal Television.
read the important
To ensure safety and many years
Safety instructions
carefully
before
INSTRUCTIONS
Electricity is used to perform marly useful functions, but it can also cause personal injuries and property damage
if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and!or fire. In order to prevent potential danger, please
observe the following instructions when installing, operating and cleaning the product. To ensure your safety
and prolong the service life of your Liquid Crystal Television, please read the following precautions caretully
before using the product.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
Read these instructions.
Keep these instructions.
Heed allwarnings.
Follow allinstructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance wittl the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as poweFsupply
cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Additional
Safety information
15) Power Sources--This
product should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery power, or other sources, refer to the
operating instructions.
16) Overloading-Do
not overload wall outlets, extension cords, or integral convenience receptacles as this
can result in a risk of fire or electric shock.
17) Object and Liquid Entry- Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18) Damage Requiring Service- Unplug this product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment
of other controls may result in damage and will often require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance
thisindicatesaneedforservice.
19) Replacement Parts-When
replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics
as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
20) Safety Check-Upon
completion of any service or repairs to this product, ask the service technician to
perform safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting-When
mounting the product on a wall or ceiling, be sure to install the product
according to the method recommended by the manufacturer.
iMPORTANT
SAFETY
iNSTRUCTiONS
• Outdoor Antenna Grounding
If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some p/otectJon against
voltage surges and built up static charges,
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors,
location of antenna discharge unit, connection to grounding
electlodes, and requirements for the grounding electrode.
EXAMPLE
NATIONAL
OF ANTENNA
ELECTRICAL
GROUNDING
AS PER
CODE, ANSI/NFPA
70
ELECTRODE SYSTEM
/NEC ART 250 PART H)
NEC --
NATIONAL
ELECTRICAL
CODE
• Turn off the main power and unplug the AC cord from the wall outlet before handling,
• scratchUSe
a softtheClOthpanelandsurface.gently
wipe the surface of the display panel Using a hard cloth may
_ _
____
• Use a soft damp cloth to gently wipe the panel when it is really dirty.
/It may scratch the panel surface when wiped strongly)
• If the panel is dusty, use an anti-static brush, which is commelcially available, to clean it,
• To protect the panel, do not use a dirty cloth, liquid cleaners or chemical cloth to clean it, such materials may damage
the panel surface
• To dean the outer cabinet, use the same method Do not use liquid or aerosol cleaners
• Water and Moisture
Do not use this product near water for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in awet basement: or near a swimming pool; and the like
• Stand
Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to tall, resulting in serious personal injuries as well as damage to the product, Use only a carf,
stand, tripod, blacket or table lecommended by the manufacturer or sold with the product When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location
Select a place with no direct sunlight and good ventilation.
• Ventilation - The vents and other openings in the cabinet are designed tot ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life ot the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings, This ploduct is not
desigrled for builtqn installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufactureCs instructions are followed
• The Liquid Crystal panel used in this product is made of glass The/efore, it can break when the ploduct is dropped or
applied with impact Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat - The product should be situated away flora heat sources such as radiators, heat registe/s, stoves, or other
products (including amplifiers) that produce heat,
• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fine picture details,
Occasionally, a few non active pixels may appear on the screen as a fixed point of blue, green or red Please note that
this does not affect the performance of your product.
• Lightning
For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods ot time, unplug it flora the wall outlet and disconnect the antenna This will p/event damage to
the equipment due to lightning and powepline surges
• Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or whele it can fall into such power lines or circuits When installing an outside antenna system,
extreme cale should be taken to keep from touching such power lines or circuits as contact with them might be fatal
• To prevent fire, never place any type ot candle or flames on the top or near the TV set
• To prevent fire or shock hazald, do not place the AC cord under the _V
set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain
• To prevent fire or shock hazard, do not expose this product to dripping
or splashing.
No objects filled with liquids, such as vases, should be placed on the product
Precautions
when transporting
the I"V
• Be sure to always carry the TV by two people holding it with two hands -
one hand on each side of the TV
QUICK REFERENCE
Before attaching (or detaching) the stand, unplug the AC
cord from the AC iNPUT terminal.
Before perfo/ming work spread cushioning over the base
area to lay the TV on This will prevent it from being
damaged.
• Attach
the stand in the correct
direction.
Do not remove the stand from the 1_/unless using an
optional wall mount bracket to mount it.
• Be sure to follow the instructions.
Incorrect installation
of the stand may result in tbe TV falling over.
1 Confirm
supplied
that there are 9 screws
with the stand unit.
Y4_l'_f/f_%
• This TV sbould be mounted on tbe wall only with the
AN-gTAG5 (SHARP) wall mount bracket. The use of
other wall mount brackets may result in an unstable
installation and may cause serious injuries.
= Installing the TV requires special skill that should
only be performed by qualified service personnel.
Customers should not attempt to do the work
themselves.
SHARP bears no responsibility
for
improper mounting or mounting that results in
accident or injury.
Using
and a hex key
an optional
bracket
to mount
the
"rv
• You can ask a qualified service professional about
using an optional AN 37AG6 bracket to mount the TV
to the wall.
2 Attach the supporting
post for the stand unit onto
the base using the box for the stand unit as shown
below.
• Carefully read the instructions
that come with the
bracket before beginning work.
f
Hanging
Hoxkoy_ @ C'r_=
AN 37AG5
on the
wall
wall mount
(See the bracket
bracket.
instructions
Vertica] mounting
About setting
0/5/10/15/20
for details.)
Angular mounting
the 13/angle
<
LC-32SB24U
3
r_ Insert the stand into the openings
of the TV.
"2', Insert and tighten the 4 screws
on the rear of the TV.
on the bottom
into the 4 holes
The center of the display:
_/,_ il/ch (4.0 mm} ul/der
the "A" position.
LC-37SB24U
The center of the display:
1/4 inch (6.0 ram) above
the "A" position.
_'f_
_ _'_s .......
Soft c
* To detach the stand, perform the steps in reverse order
Refer to the operation
manual d AN 37AG5
details.
for
Detach the cable clamp on the rear of the %/when using
the optional mount bracket.
Due to the terminal configuration on this %/, when you
walPmount this model, make sure there is enough space
between the wall and the %/for the cables,
To use this %/mounted on a wall, first remove the
adhesive tape at the 4 locations on the rear of the %/, and
then use the screws supplied with the wall mount bracket
to secure the bracket to the rear of the %/
QUICK
o
REFERENCE
,_
t=
-=
±
ok
D
1
Attach your antenna
(See page 8.)
to the back of the tebvision.
2
outlet.C°nnecttheACplugf°rthetelevisi°nint°theAC
:3
Bundle
the cords properly
with the cable clamp.
SJ
4
• Place the TV close to the AC outlet, and keep the power
plug within reach
How to turn on the television for the first time.
A)
Press
B)
The POWER indicator on the front of the
television lights GREEN.
co
POWER
"_" ';'
on the television.
;_
II
POWER
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED
PARTS OF ANY CABLES
WiTH THE AC CORD CONNECTED.
• Speakers cannot be detached from the _V.
• TV angle cannot be adjusted
Use the remote co_trol u_flt by pointing it towards the remote co_trol sensor on the TV. Objects
remote control unit and the remote control sensor may prevent proper operation.
[] Cautions
regarding
the
remote
between
the
control
unit
Do not expose the remote control unit to shock In addition,
do not expose the remote control unit to liquids, and do not
place in an area with high humidity,
O
_
O
Pr2q_R
/
k
O
SLE'
O
O_O
J
_
Remote Control sensor
_0°
17 (5 m)
sunlight, The heat may cause deformation of the remote
Do not unit
control
install or place the remote control unit under direct
• The remote control unit may not work propedy if the remote
"
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the _V, or operate the remote control unit closer to the
remote control sensor
The POWER indicator ors the television should lightGREEN irldicating you have power to the television,
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the power on
iMPORTANT:
IF THE UNIT DOES NOT POWER ON
STEPS
UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1 800 BE SHARP
Preparation
To enjoy a clearer picture, use an outdoor antenna. The following is a bdef explanation
that are used for a coaxial cable, if your outdoor antenna uses a 75 ohm coaxial cable
plug it into the antenna terminal at the rear of the TV set.
fl ,A 75-ohm
system is generally a round cable with F type connector
_F
that can easily be attached to a terminal without tools (Commercially
available)
connector
should
if tools are used, it may cause damage
_of
internal circuit,
75 ohm coaxial cable (round)
3OO ohm twin lead cable (flat)
be finger-tightened
When connecting
the RF came to the TV set, do not tighten
connector
with tools.
type connector
_
2,A S0O ohm system is a flat "twirl lead" cable that carl be attached
to a 75-ohm terminal through a 300/75 ohm adapter (Commercially
available)
F-type
of the types of connections
with an F type connector,
only.
F type connector
F type
_=_'_4_b'_
to your TV set. (The breaking
75-ohm coaxial cable
etc.)
f
Connecting
Antenna
Cable
* Connect the antenna cable to the 33/using
I_
Cable
without
_
CAIn'
Cable
r_/lead
one of the methods in the illusti'ation
HomeAntenna
_rl
te rfit/al
converter
[_
_"
VHF/UHF
antenna
@
Combination
UHF antenna
as shown
(_,, '9, _
or _=).
(75 ohm)
c_×ialcable
(¢°lnmelcJally
availabJe
HomeAntenna
te rrinal(TSohm)
[_
C _×lal
cable
..........................
VHF/
i//lll/I
I
(4_ Separate VHF/UHF
antenna
seeohm
VHF
ANTENNA
_'_in lead
cable
Celnb4ner
(comme
--"
If the remote
control fails to operate
1 Open the battery cover.
TV functions,
replace
the batteries
cially
in the remote
2 insert two "AA" size batteries
(supplied
available)
TO TV anterlr]a
terminal
with the product).
%
3 Close
control
unit.
the battery
%
cover.
Place the batteries with their terminals
corlesponding to the ( ) and ( )
indications in the battery compartment,
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below
Do not mix batteries of different types. Different types of batteries have diffe/ent characteristics
* Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage
in old batteries,
Remove batteries as soon as they ale worn out Chemicals that leak from batteries that come in contact with skin can cause a
rash, If you find any chemical leakage, wipe thoroughly with a cloth.
* The batteries supplied with this ploduct may have a shorter life expectancy due to storage conditions
o Ifyou will not be using the remote control unit for an extended period of time, remove batteries flora it,
Part Names
Volume buttons
NOL
/+)
INPUT button
1
--
l
l--
button
AC INPUTterminal
L
H_ml
POWER
AUDIO OUTPUT terminals
DIGITAL AUDIO OUTPUT terminal
INPUT 6 terminals
(PC-IN)
INPUT 5 terminals
(HDMI)
INPUT 4 terminal
(HDMI)
INPUT 1 terminals
SERVICE terminal
,
INPUT 2 terminals
Antenna/Cable
in
INPUT 3 terminals
The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations¸
• The examples used th_'oughout this manual are based on the LC 82SB24U model¸
Part Names
1
POWER:
Switch
sb_ndby.
2
CC:
Display captions
source.
@
32
:3
12
POWER
cc
Auolo
on or enters
from a dosed
caption
(See page 15.)
AUDIO:
during
14.)
_)_SPLAY
SLEEP
,,W_0DE 13
the TV power
(See page 12.)
Selects the MTS/SAP
multi
or the audio mode
channel
audio broadcasts.
Set the channel
(See page 13.)
(See page
4
0-9:
5
• (DOT}:
6
FLASHBACK:
Return to the previous
external input mode. (See page 14.)
7
VNEW MODE:
8
FREEZE: Set the still image. Press again to return
to normal screen. (See page 13.)
9
A/y/41/11)-,
screen.
14
(See page 13.)
Select a desired
10 EXIT: Turn oh the menu
12 SLEEP:
Display
Select
item on the
screen.
the channel
Set the sbep
13 AV MODE:
or
Select the screen size. (See page 16.)
ENTER:
11 DISPLAY:
channel
intormation.
timer. (See page 13.)
an audio or video
setting.
(When the input source is TV, INPUT 1,2 or 3:
STANDARD,
MOVIE, GAME, USER, DYNAMIC
(Fixed), DYNAMIC. When the input source is iNPUT
4, 5 or 6: STANDARD,
MOVIE, GAME, PC, USER,
DYNAMIC
14 MUTE:
(Fixed),
15 VOL +/-
.
_ii_
¸
to a channel
Sebct
19 PC: Quickly
MENU:
21 RETURN:
22
access
Dispby
FAVORITE
(See page 13.)
alter selecting
a TV input source.
INPUT 2, INPUT 3, INPUT
(See page 13.)
20
(See page 13.)
Select the channel
17 ENT: Jumps
0-9 buttons.
18 INPUT:
(See page 14.)
(See page 13.)
: Set the volume.
16 CHA/V:
iiii_
DYNAMIC)
Mute the sound.
with the
(TV, INPUT
1,
4, INPUT 5, INPUT
6)
to PC mode.
the menu screen.
Return to the previous
menu
screen.
CH
A, B, C, D: Select 4 preset favorite channels
different categories.
(See page 25.)
in 4
While watching,
you can toggle the selected
channels by pressing A, B, C and D.
• When us]ng the remote contlol unit, point it at the TV
10
Connecting
to External Equipment
You can connect many types of external equipment
to your TV like a Blu-ray disc player, HD DVD player, DVD
player, VCR, Digital TV tuner, HDMI equipment,
game consde or camcorder.
To vbw external source images,
select the input source from iNPUT on the remote control unit or on the TV. (See page 13.)
* To protect equipment, a]ways turn off the TV before connecting any extema] equipment,
o Please read the relevant operation manual (Blu-ray disc player, etc) carefufly before making connections
Connecting a Blu-ray disc player, HD-DVD
game console or camcorder
player, DVD player,
Digital TV STB (Air or Cable}, VCR,
Terminal
Terminal
on the TV
NPUT 1 or 2
Cable
vl_>_o AU_IO
® _®
NPUT 1 or 3
AV cable
(commercially
available)
C_P0_NTAdDIO
_® ®
",® o®
Component video cable (commercially availabb) t_
2
S-VIDEO
@L®
n®
INPUT 4 or 5
f_
Audio cable (commercially available)
P.®
INPUT
on external
equipment
Audio
cable
cabb
(commercially
(commerciaffy
available)
available)
*2
Hi:_mt
m
DIGITAL AUDIO
OUTPUT
r_
[_!h._,:_
HDMbcertified
cable
(commerciaffy
available)
;_i[_
HOml
*3
_IalTAI
Audio
LL_;
oumu
_j
optical fiber cable (commerciaffy available)
[ ._,q_
DIGITAL
AUmlO
INpuT
"1 * The S-VIDEO terminal takes priority over the video termina]s, (INPUT 2 only)
•2 _ When using an HDMPDVl conversion cable, input the audio signal to AUDIO terminal of INPUT 5
•3 * Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI
connection In this case, set the audio formats of the connected equipment to PCM, 32/44 1/48 kHz and 16 bits
Connecting
a PC
Terminal on the TV
INPUT
6
ANALOG
(_GB
_PClN_
_)
RGB cable
O 3.5 mm stereo
INPUT 4 or 5
Terminal on PC
Cable
ADDIO
(commercially
minijack
cable
available)
(comme_iaffy
available)
®
H_m!
HDMbcertified
cable
(commercially
available)
_r,-.l!_d,} :
Hi_ml
* The HDMI terminals only support digital signal,
* Refer to page 30 for a list of PC signals compatible with the %/
Watching
_
TV
'_'
'_
.....
POWER
poweron.
Press
POWER
on (Green):
the TV The
or on
the on
remote
unit to aturn
the
POWER
indicator
%/is
(After control
a few seconds,
window
appears with sound)
_X_
The initial setup starts when the TV powers on for the first time, If the TV has
been turned on before, the E7 Setup will not be invoked See page 20 for
performing E7 Setup from the Setup menu,
POWER
(On/Standby)
Press
power
• The
The
POWER on the TV or on the remote control unit again to turn the
off.
_V enters standby and the image on the screen disappears.
POWER indicator on the TV turns off
_DTJ
If you are not going to use this TV for a long period of time, be sure to remove
the AC cord from the AC outlet,
® Weak electric power is still consumed even when the TV is turned off
When you turn on the TV for the fist time, it will
automatically
memorize the broadcasting
channels
available in the region where you live. Perform the
following steps before you press POWER on the
remote control unit.
Air/Cable (Antenna setting}
Make sure what kind of connection is made with your %/
when selecting "Air" or "Cable"
3 Press _/_ to select "Air" or "Cable"
Press ENTER to enter the setting
1. Insertthe batteries intothe remote control unit (See page 8)
2, Connect the antenna cable to the TV (See page 8,)
g, Plug in the AC cord to the AC outlet (See page 7 )
Example
CN Search (Channel search}
Channel auto search makes the _V look for all channels
viewable in the set area.
Language (Language setting}
Select from among 3 languages: English, French and Spanish,
"_ Press A/1F to select the deshed language listed on the
screen, and then press ENTER
4
When "Air" is selected in Antenna setting:
Press _i/_ to select "Start", and then press ENTER
When "Cable"
]3/Location
Select "Home" or "Store" for the location where you plan to
install the %/,
2
is selected
in Antenna
setting:
Press A/_" to select "Analog & Digital Search Start" to
search both analog and digital broadcasts, or to select
"Analog Search Start>'to search only analog broadcasts,
and then press ENTER,
Press 4/_ to select "Home" or "Store"
Press ENTER to enter the setting
Example
The Channel search will start automatically,
To exit the Channel search screen, select "Cancel", and
then press ENTER
• if you select "Home", AV MODE is set to "STANDARD"
If you select "Store", AV MODE is set to "DYNAMIC (Fixed)".
In case no remote control signal is received within 80 minutes,
rAV MODE will change to "DYNAM b(Fked)"
automatically
• For changing the %/Location after the setting, see "EZ
Setup" on page 20
If no channel is found, confirm the type of connection made
with your TV and t/y EZ Setup again
(See page 20)
12
Direct Button Operation
Mutes the current
Press MUTE.
sound output.
• "r,_" will be displayed on the screen for 30 minutes, and
the sound is silenced
@@@
@@@
@@@
®®@
®@@
_REEZE
Within 80 minutes of pressing MUTE, mute can be
canceled by using one of the methods below
Mute will be canceled ifyou press VOL +/or MUTE.
• Mute will be canceled after SOminutes have passed,
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automaticafly,
Allows you to set a time when
switches to standby.
Press SLEEP.
r_E_U
the TV automatically
The remaining time displays when the sleep timer has been set
• Each time you press SLEEP, the remaining time switches
as shown below.
Off 1301
t
60 _* 90 i
120
=
When set, the time automatically starts counting down
Ifyou want to ad ust the sleep timer, you can press SLEEP
twice then change the time setting.
• Five minutes before the time expires, the remaining time
displays every minute
You can change channels by pressing CHA/V
or 1_9,
* (DOT).
Examples:
To select a i or 2-digit channel number (e. g., Channel 5):
Press 5 _
ENT.
Select "Off" by pressing SLEEP to cancel the sleep timer.
The TV will enter standby when 1he remaining time reacheszero
= When the sleep timer is set, its indicator on the TV lights red
To select a 3-digit channel number (e. g., Channel 115):
Press 1_
1_
5_
ENT,
Allows you to capture and freeze a moving
you are watching.
Press FREEZE.
• A moving image is captured.
• Press FREEZE again to cancel the function
To select a 4-digit channel number (e. g., Channel 22.1):
Press 2 _
2_
* (DOT) _
1 _ENT
o When selecting a 1-digit channel number, it is not
necessaly to press 0 before the number,
o When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
o If you push "O" by itself, nothing will happen.
Complete the above steps within a few seconds,
When you enter 0-9 and * (DOT), channel selection will be
made if there is no operation within a few seconds.
You can change the volurrle by pressing
the TV or on the remote control unit.
VOL+/-
When this function is not available, "No displaying still
image available," will display,
The still image automatica]ly goes out after 30 minutes.
Ifyou are usin/g the freeze function and a broadcast
activates the V-CHP BLOCK, the freeze function will be
canceled and a V-CHP BLOCK message will appear,
on
To view external source images, select the input source
using INPUT on the remote control unit or on the TV.
1 Press _NPUT.
To increase the volume, press VOL +
o To decrease the volume, pless VOL -
I@...............................
a2ol
Audio
5'
status
A list of selectable sources appears.
Press _NPUT again or press _/_'
input source.
to select the
An image from the selected source automatically displays
Each time _NPUT is pressed, the input source toggles,
® [f the corresponding inpulis not plugged in,you cannot change
the input Be sureto connect the equipment beforehand
• When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below
I
image that
See page 1f for external equipment connection
• Press PC to switch to an image from the PC
_1
• See page 25 for details on the Output Select function
13
Direct
Button
*_1' _s_#_!
Operation
....
[] MTS/SAP
AV MODE gives you 7 viewing options to choose from
to best match the surrounding
environment
of the TV,
which can vary due to factors like room brightness,
type of program watched or the type of image input
from external equipment.
stereo
mode
The TV has a feature that allows reception of sound
other than the main audio for the program. This feature
is called Multi channel Television Sound (MTS). The TV
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP
feature allows a TV station to broadcast
other
Press AV MODE. Current AV MODE displays.
Press AV MODE again before the mode displayed on the
screen disappears The mode changes as shown below:
information,
which could
or something
completely
information.
Example:
When the input source is TV, iNPUT 1, 2 or 3 terminals
STANDARD _ MOVIE _ GAME _ USER [rv]
t
1
DYNAMIC •
DYNAMIC (Fixed[
be audio in another language
different like weather
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where available.
* Stereo broadcasts: View p/ograms like live sporting
events, shows and concerts in dynamic _te_eo sound
* SAP broadcasts: Receive TV broadcasts in either MAiN or
SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo)
SAP sound: Listen to a second language, supplementaly
commentary or other information (SAP is mono sound.)
if stereo sound is difficult to bear,
Obtain a clearer sound by manually switching to fixed
mono sound mode
Example:
When the input source is iNPUT 4, 5 or 6 terminals
STANDARD_
MOVIE _GAME_
PC
!
!
DYNAMIC _
DYNAMIC (Fixed[_
USER[ ,,PI
STANDARD: For a highly defined image in a normal
lighting.
[Enhanced Pictu/e Contrast: on]
MOVIE: For a movie
[Enhanced Pictu/e Contrast: oft7
GAME: Lowers image brightness for easier viewing.
You can change MTS as shown below to match the television
broadcast sigrla]
[Enhanced Pictu/e Contrast: oft7
PC: For PC
Press AUDIO to toggle between audio modes
[Enhanced Pictu/e Contrast: off]
USER: Allows the user to customize settings as desired
You can set the mode for each input source
[Enhanced Pictu/e Contrast: off]
DYNAMIC {Fixed): Changes the image and sound
settings to the facto/y p/eset values No adjustments
are allowed
Examples: when receiving MTS and SAP
STEREO mode: STEREO_
MONO
STEREO + SAP mode: ST(SAP[ _ SAP(ST_
t
MAIN + SAP mode: MAIN_
SAP
MONO mode: MONO
MONO
I
[] Digital broadcasting
audio mode
The types of audio tlansmitted in a digital b/oadcast include
SURROUND as well as MONO and STEREO In addition, it
is possible for multiple audio tracks to accompany a single
video track
[Enhanced Pictu/e Contrast: on]
DYNAMIC: For a dea_cut image emphasizing high
contrast, usdul for sports viewing.
[Enhanced Pictule Contrast: on]
Press AUDIO to toggle between audio modes,
You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for INPUT 1,)
• When you play games, "GAME" is recommended for AV
MODE,
• "Enhanced Picture Contrast" technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly to realize deeper black levels
Example: when receiving Digital broadcasting
STEREO (Audio1) _ STEREO (Audio2)
t,...m SURROUND (Audio3) _-..roll
MTS only operates while in %/mode
Press FLASHBACK
channel.
Press FLASHBACK
tuned channel
to switch
to the previously
tuned
again to switch back to the currently
• FLASHBACK will not work if no channel has been changed
after the %/is turned on
14
Direct Button
Operation
Your TV is equipped with an internal Closed Caption
decoder.
It allows you to view cor/versations,
narration
and sound dlects as subtFtles on your TV. Closed
1
Press
CC.
This will p/esent the Closed Caption information
display
Captions are available on some TV programs and on
some VHS home video tapes at the discretion ot the
program provider.
2
Press CC while the Closed
still o[_ the screen.
Digital Closed Caption service is a new caption sen/ice
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the odginal Closed Caption system,
because it allows for a variety ot caption sizes and font
styles. When the Digital Closed Caption service is Fn
use, it will be indicated by the appearance
of a 3 letter
abbreviation
that also indicates the language ot the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
Not all programs
and VHS videotapes
captions. Please look tot the "_"
that captions will be shown.
In the Closed
Caption
system,
information
is
information
Depending on the number of caption services in the
signal being received> you will see information such as
1/2 or 1/4 displayed.
1/2 means <<theflint of two services '>
Example:
If a program has three services (Digital CC(ENG), CCI
and Text1), the closed caption display will toggle in this
sequence:
ofler closed
symbol
Caption
Pless repeatedly until you select the desired closed
caption service
to ensure
there can be more than
one caption service provided.
Each is identh'ied by its
own number. The "CC1" and "CC2" services display
subtitles of TV programs superimposed
over the
program's
picture.
Illlill_-il_W_-EII
• The CO button keeps a record of the last service
selected in its memory,
If the last closed caption mode (e.g 1/3ENG) you
selected is not available for the next program, or on
another channel, the closed caption service that is
available is automatically selected, and this service
appeals in parentheses, e.g "1/3(CC1)".
Closed Caption services that appear in palentheses will
not be stored in the CO button's memory as your last
selected service. Only services that you have selected
with the CC button are stored
In the Closed Caption system, the "Text1" or "Text2"
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed
over the program currently
being viewed.
Examples:
In a case where there are two closed caption
services provided (tor instance, Digital CC(ENG)
and CC1), and Digital CC(ENG)is
displayed
as your current selection, if Digital CC(ENG) is
not broadcast for the next program, the other
closed caption service, CC1, will be displayed in
parentheses.
A closed caption service appears
because the sen/ice you selected
and a different service is displayed
"1/1 (CC1)" is displayed instead of
in parentheses
is not available
on your screen.
"I/2/ENG".
See page 25 for d_ailed closed caption settings.
When the p_gram contailqs no closed caption, <<" displavs
in the closed c_tion information.
• if the language code, e,g, "ENG >_,is not _und on Digital %/
p_grams, <<-" will be shown.
• Four kinds of closed c_tion service _01, CC2, Text1,
Text2) are potentially available, but a b_adcast m%/contain
none or only some _ these services at the discretion of the
p_gram provider¸
15
Direct Button
Operation
You can select the screen size.
1
2
Press
The
The
Press
You
VIEW MODE.
View Mode menu displays.
menu lists the View Mode options selectable for the type of video signal currently being received
VIEW MODE or A/_'
whFle the Vbw Mode menu is displayed to sebct a desked item on the menu.
can sequentially select a View Mode that has its own aspect ratio
[] For 4:3 programs
Example:
Screen
size images
Side Bar
Suitable for viewing
conventional 4:3 programs in
thek normal format,
S.Stretch
(Smart
Zoom
stretch}
Suitable for stretching 4:3
programs to fill the screen.
Stretch
Suitable for viewing widescreen 2,35:1 anamorphic
DVDs in full scleen.
This mode is useful for 178:1
DVDs When viewing1,85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
[] For HD programs
Stretch: Suitable for viewing wide screen 178:1 aspect ratio program, stretch mode will sdll show very thin black bands at
the top and bottom of the screen.
Full Screen: Displays an image faithful to the input signal in full screen.
S,Stretch (Smart stretch}: Suitable for stretching 4:3 programs to fill the screen
Zoom: Suitable for viewing wide screen 23_:1
aspect ratio programs in full screen
• When using Full Screen, it ]s possible to see noise or bars around different outer portions of the screen Please change view
mode to correct this.
[] For PC input
mode
• Connect the PC before making adjustments, (See page 11 )
Selectable screen size may van/with input signal type
Example:
Screen
size images
Input signal
Normal
Zoom
Stretch
Dot by Dot
An in-lage fully fills the
screen
Detects the resolution
of the signal and
displays an imagewith
the same number d
pixels on the screen
ro]
4:{3
input signal
Keeps the original
aspect ratio in afu]l
screen display
El
Forviewing
widescreen
programs, The top
and bottom of the
image is cropped
Stretch
Dot by Dot
An image fully fills the
screen
Detects the resolution
of the signal and
displays an image with
the same number of
}ixels on the screen
[©1
16:9
16
On-Screen
Display
Menu
Example
Example
[_
Option
,0
_', Item displayed in yellow
• This indicates the item currently selected,
Press ENTER to go to the adjustment screen for this
item
_
Item in brackets
This indicates the current setting for the item.
_1 Item displayed in white
This indicates that the item can be selected
_
_
Press
_/_-
to select the desired
item.
_2_ Press
&/T
to select the desired
item.
_1 Press
_/D,,
to adiust the item.
Item displayed in gray
This indicates that the item cannot be selected.
There are various reasons why the items cannot be
selected, but the main reasons are as follows:
Nothing is connected to the selected input terminal.
-The function is not compatible with the current input
signal.
Menu options differ in the selected input modes, but the
op_erating procedures are the same
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
valy slightly from the actual screens.
"r
Using the remote controm
Use the following buttons on the remote
operate the IT/eRIJ.
control
Using the control
panel of the main unit
You can also operate the menu with the control
of the main unit.
to
panel
Button operations
on the control panel correspond
the ores oR the remote control as shown below.
e==e
MENU:
Press to open or close the menu screen
A/T/_i/_:
Press to select a desired item on the screen or
adjust a selected item
ENTER:
Press to go to the next step or complete the
setting,
RETURN:
Press to letum to the p/evious step
e==e
®
VOL-/+
: Cursor _/_
on the remote control
CNV/A:
Cursor T/A
on the remote control
INPUT: ENTER on the remote control
MENU: MENU on the remote control
17
O
to
On-Screen
Display Menu
Adiusts the picture to your preference
following picture settings.
Example[
Automatically
adjusts the brightness ot the screen.
Off: The brightness is fixed at the value set in "Backlight"
with the
On: Automatically adjusts,
On: Display: Displays the OPC effect on the screen while
adjusting the brightness ot the screen.
t_ picture
• When set to "On", the OPC senses the surrounding light
and automatically adjusts the backlight brightness, Make
sure nothing obst/ucts the OPC sensor, which could affect
its ability to sense surrounding light
When set to "On: Display", OPC effect displays on the
screen while the OPC adjusts the screen brightness
When set to "On" or "On: Display", the OPC indicator on
the %/lights green
This TV provides various advanced
optimizing the picture quality.
1
Press MENU to display the MENU screen,
press _l/l_ to select "Picture".
2
Press A/_'
to select a specific adiustment
item.
Select "Advanced" and then p/ess ENTER to set
"C,M,S.-Hue", "C M S, Saturation", "Color Temp ",
"Active Contrast", "Film Mode", "Digital Noise
Reduction", "3D Y/C", "Monochrome" or "Range of
OPC"
3
Press A/_'(or
_/1_') to select the desired
and then press ENTER.
4
Press MENU
Color tone is managed using the six color adiustment
setting.
C,M,S,-Nue: This is a standard to adjust the color either
mole reddish or more bluish in tone.
C,M,S,-Saturation:
Increases or decreases the
saturation of a selected color
setting,
For resetting all adjustment items to the facto/y preset
values, press A/_ to select "Reset", and then press
ENTER.
to exit.
The screen dims
Contrast
For less contrast
For less
brightness
For less color
intensity
Skin tones
become reddish
For less
sharpness
Brightness
Color
Tint
Sharpness
tot
and then
Sei
Backlight
functions
The screen
brightens
For more contrast
For more
brightness
For more color
intensity
Skin tones
become greenish
For more
sharpness
For a better
correction.
For resetting all Pictu/e adjustment items to the factory
preset values, pless h,/_' to select "Reset", press ENTER,
press 4/b- to select "Yes", and then press ENTER
white balance,
use color temperature
Nigh:
White with bluish tone
Middle:
Mid-Nigh:
Mid-Low:
Low:
White with/eddish
Automatically
the scene.
adiusts
tone
the image contrast
according
On: Automatically adjusts the image cont/ast
Off: No adjustment,
18
to
On-Screen
Display Menu
Automatically
detects a film-based source (originally
encoded at 24 frames/second),
analyzes it then
recreates each still film frame for high-definition
picture
quality.
On: Detects, analyzes, converts film source
Off: Normal viewing mode
You can adjust the sound quality
with the following
settings.
Example [
L
(}
to your preference
Audio
• "Rim Mode" does not function when you set the "AV Mode"
to "Game",
"Film Mode" is not selectable when channel display shows
an input resolution of 4SOP or 720P.
Produces a clearer video image.
Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction
Provides high quality images with minimal
and cross color noise.
dot crawl
1
Press MENU to display the MENU screen,
press _/1_- to select "Audio".
5'
Press _/_'
to select a specific adjustment
item.
Select "Surround" or "Bass Enhancer" and then press
ENTER to set each item
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images
Press A/_'
(or _/1_-)to
and then press ENTER.
4
Off (2D): For Game Mode
Press MENU
select the desired
and then
setting,
to exit.
1_ele
• SD Y/C is available for input signal from Composite Video
and analog broadcasts (air and cable).
For viewing
a video
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decreaseaudio from
the right speaker
Decrease audio from
the left speaker
in monochrome.
On: For viewing in monochrome.
Off: Normal color.
_:t_?2
_/_
Audio menu is grayed out when Output Select is set to
"Variable".
For resetting all Audio adjustment items to the factory
preset values, press _,/_' to select "Reset", press ENTER,
press _/_ to select "Yes", and then press ENTER.
The brightness
level range of the OPC sensor's
automatic adjustments
can be set according to your
preferences.
The adiustment
range of the OPC sensor can be set to
a maximum of +16 and a minimum of 16.
Max,:
15 through +16
Min.:
16through
Surround function allows you to enjoy realistic
On: Surround function is on
Off: No/real sound
+15
The range of OPC settings are active only when the OPC is
set to "On"
The maximum setting cannot be set to a smaller number
than the minimum setting.
The minimum setting cannot be set to a bigger number
than the maximum setting
Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small
"live" sound.
Audio menu is grayed out when Output Select is set to
"Variable"
For some discs, setup may be required on your DVD player
In this case, please refer to the operation manual of your
DVD player
This function allows you to enjoy bass enhanced
On: Bass Enhancer function is on
Off: No/real sound
sound.
Audio menu is grayed out when Output Select is set to
"Variable"
19
On-Screen
Power
Display Menu
control setting
Example I _
allows
You can run EZ Setup again, even after setting up the
preset channels.
Language: Select from among 3 languages (English,
French and Spanish).
33/Location:
Select "Home" or "Store" for the location
where you plan to install the %/.
Ifyou select "Home", AV MODEis set to "STANDARD"
Ifyou select "Store", AVMODE is setto "DYNAMIC(Fixed)"
Inease no remotecontrol signal is receivedwithin 30
minutes, AVMODE will change to "DYNAMIC(Fixed)"
automatically
Air/Cable: Make sure what kind of connection is made
with your TV when selecting "Air" or "Cable"
CH Search: Channel auto search makes the TV look for
a]l channels viewable in the set area.
you to save energy.
P_erOontrol
1
Press MENU to display the MENU screen,
press _/1_ to select "Power Control".
2
Press A/_" to select a "No Signal Off" or "No
Operation Off", and then press ENTER.
3
Press _/_ENTER.
4
Press MENU
to select "Enable",
and then
and then press
See "Initial Setup" on page 12 for setting each item.
) If no channel isfound, confirm the type of connection made
with your TV and try E7 Setup again
) Ifyou select "Analog Search Start" and initiate the channel
search, the OH Memory for Cable Digital will be deleted.
to exit.
When set to"Enable", the power will automatically
down if there is no signal for 15 minutes.
shut
) Five minutes before the power shuts down, the remaining
time displays every minute
• "Disable" is the factory preset va]ue.
When a TV program finishes, this function may not operate
When set to "Enable", the power will automatically
down if there is no operation for 3 hours.
If initial setup does not memorize all the channels in
your region, follow the instructions
below to manually
memorize the channels.
Air/Cable: Make sure what kind of connection is made
with your %/when selecting "Air" or "Cable"
CH Search: Channel auto search makes the %/look for
a]l channels viewable in the set area.
shut
CH Memory: You can select the channels to skip in each
ANALOG (Air),ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable)
On: Skips channels (Channel selectiondisabledusing DR
A/V)
Off: Doesnot skipchannels (Channelselection enabledusing
CHA/V)
• Five minutes before the power shuts down, the remaining
time displays every minute
"Disable" is the factory preset va]ue
Example
[_
Setup
See "Initial Setup" on page 12 for setting each iteln.
If no channel isfound, confirm the type of connection made
with your %/and try channel search again.
Ifyou select "Analog Search Start" and initiate the channel
search, the OH Memory for Cable Digital will be deleted.
In order to receive digital air broadcasts,
you need
a digital broadcast
antenna. You can confirm the
antenna configuration
through the "Antenna Setup
DiGiTAL" screen. If necessary,
adjust the direction of
the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel
is displayed The signal ]nformation is based on the
current channel.
1
Press MENU to display the MENU screen,
press _/_- to select "Setup".
and then
2
Press A/_'
toselect
aspeciflc
and then press ENTER.
item,
3
4
adjustment
Channel Strength: Input the 2 digit channel number
to check the signal strength of the selected channel
Make sure the signa] is strong enough for each
channel
This function isavailablefor DIGITAL (Air)only
When you select "EZ Setup", "OH Setup", "Parental
CTRL" and "Reset", you can enter the 4-digit secret
number here See page 22 for setting a secret number.
Press _k/_' (or 4/1_) to select the desired setting,
and then press ENTER.
Press MENU
to exit.
2O
On-Screen
Display
Menu
This setting allows you to skip the HDMI or PC-IN Input
("Input 4 (HDMI)", "Input 5 (HDMI)" and "Input 6 (RGB)")
on the Input Selection operation.
Yes: Skips the input,
No: Does not skip input.
Lets you set the input terminal displayed when using
the INPUT SOURCE menu or channel display. Press
&IT/_/11_
to select the new name for the input
mode.
You cannot change labels if the INPUT SOURCE is _V
Some input signals may have to be registered manually
to display properly. The pair of input signals (resolutions)
in the list below is not distinguishable
when received.
In such a case, you have to set the correct signal
manually. After setting once, it will display when the
same signal (resolution) is input again.
El 024 x 768
1360 x 768
J
You can only select the "Input Signal" on the Setup menu
when receiving one of the 2 input signals listed above.
For automatically
adjusting the PC image.
Yes: Auto Sync. starts and "Now adjusting the image _'
displays,
No: This function does not work.
When Auto Sync, is successful, "Completed" displays, If
not, Auto Sync. failed
Auto Sync. may fail even if "Completed" displays
Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Ordinarily you can easily adjust the picture as
necessary to change image pos_ion using Auto Sync.
In some cases, however,
manual adjustment
is needed
to optimize the image.
N-Pos.: Centers the image by moving it to the left or
right,
V-Pos.: Centers the image by moving it up or down
For adjusting a picture's horizontal and vertical
position.
N-Pos.: Centers the image by moving it to the left or
right,
V-Pos.: Centers the image by moving it up or down
• For resetting adjustments to the factory preset values,
press A/_' to select "Reset", and then press ENTER.
• When connecting a PC to the HDMI terminal, the image
position will be automatically adjusted It cannot be
manually adjusted.
The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position-setting screen.
Adjustments are stored separately according to input
source
You can also select a language from the Setup menu.
Select from among 3 languages:
English, French and
Spanish.
If complex adjustments
are made and the seltings
CaRROt be restored to noRY/al, you can reset the
settings to the factory preset values.
1
"Return
screen.
For resetting all Fine Sync. adjustment items to the facto/y
preset values, press h,/T to select "Reset", and then press
ENTER
k is not necessa/y to adjust the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected
The default cursor position may not be in the center
because the screen position variable ranges may be
asymmetrical.
• The screen position variable ranges depend on the View
Mode or the signal type. The ranges can be seen on the
position setting screen
values"
displays
on the
If you have already set the Secret No, input the 4-digit
secret number here See page 22 for setting a secret
number
2
Select
"Yes".
"Now, TV will restart automatically
screen
8
Select
OK?" displays on the
"Yes".
"Now initializing.,," displays on the screen and blinks,
After the reset has been completed, the power shuts off
and then comes back on The screen will have returned
to its original settings,
Clock: Adjust when the image flickers with vertical
stdpes,
Phase: Adjust when characters have low contrast or
when the image flickers
to the factory preset
The
The
The
The
Channel Setup settings will not be changed
Language settings will not be changed.
Secret number settings will not be changed
TV Location Settings will not be changed
On-Screen
Display
Menu
Allows you to use a secret number to protect
settings from being accidentally
changed.
V CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree ot control
over broadcasts
accessed
by their children. It allows
parents to select programs judged suitable tot child
viewing while blocking ones judged not suitable. It
does so automatically
once you activate the V CHIP
feature in your TV. "V-Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
The U.S. has two rating systems for viewing content: T_/
Parental Guidelines and movie ratings.
The TV Parental Guidelines wo/k in conjunction with the
V CHIP to help parents screen out inapp/opriate television
shows f/om their children
Movie ratings are used for original movies rated by the
Motion Picture Association d America (MPAA) as watched
on cable T_/and not edited for television, The V CHIP can
also be set to block MPAA rated movies
certain
IMPORTANT:
Three conditions must be met to enable the VChip/see
pages 22 to 24):
t. Secret No is registered.
2. V Chip/V Chip (DT//Only) settings have been made.
The "V Chip (DTV Only)" will only be selectable when
a new rating system can be downloaded via digital
bloadcasting in the US
8. "Status" is set to "On"
[] New Secret
No.
You can _t and change the secret number by using C_9.
h_put Secret No.: When you change the secret number,
enter the old 4 digit secret number here The cursor
moves to "New Secret No,"
The setting automatically enters "Block" for any ratings
below your selection.
If Status is not set to "On", the configuration settings will
not work.
New Secret No.: When you set the new secret number,
enter the new 4 digit secret number here The culsor
moves to "Reconfirm",
[] MPAA
No.
movie
rating
system)
Example
Reconfirm:
Enter the same 4 digit number you set in
"New Seclet No"
[] Secret
(Voluntary
C_ear
You can clear your secret nu/rlber.
Yes: Your secret number is cleared
No: Your secret number is not cleared
As a p_ecautionary measure, make a note of your secret
number and keep it in a familiar place,
If the secret number is cleared, the Status setting
automatically sets to "Oft", "V-Chip" and "Status" will not be
selectable fiom the menu.
Press _/_
to adjust the item to your desired position.
"_" indicates the item is blocked. Press MENU to exit.
G: General audiences. All ages admitted,
PG: Parental guidance suggested. Some material may not be
suitable for children.
P(_-13: Parents strongly cautioned. Some material may be
inappropriate for children under 1g,
R: Restricted. Under 17 lequires accompanying palent or
adult guardian (age varies in some jurisdictions)
N0-17: No one 17 and under admitted,
X: X is an older rating that is unified with NC 17 but may be
encoded in the data of older movies
Used to enable or disable the parental control function.
This function will not be selectable _rom the menu it
you do not first configure your secret
On: Enables Palental CTRL
number.
Off: Disables Parental CTRL
Volunta/y movie rating system only uses an age based
rating,
22
On-Screen
Display Menu
[] TV Parental
Guidelines
Canadkm Rating Systems (Canadian English ratings
and Canadian
French ratings)
The TV lating systems in Canada are based on the
Canadian Radio Television and Telecommunications
Commission (¢;RTC) policy on violence in television
p/ogramming.
While violence is the most important content element to
be rated, the structure developed takes into consideration
other program content like language, nudity, sexuality and
mature themes
When setting the V-CHIP on the Canadian system you can
choose either the Canadian English ratings or the Canadian
French ratings
Example
PressA/T
to adjust the item to your desired pos_ion.
"t_" indicates the item is blocked. Press MENU to exit.
[] Canadian
Suggested
age
T_/-Y: All children.
TV-Y7: Directed to older children.
TV-G: General audience.
English
Ratings
Example
TV-PG: Parental Guidance suggested.
TV-I 4: Parents strongly cautioned.
T_/-MA: Mature audience only.
Example
Press A/Y
to adjust the item to your desired position.
"t_" indicates the item is blocked. Press MENU to exit.
E: Exempt: Includes news, sports, documentaries and other
information programming; talk shows, music videos, and
variety p/ogramming
C: Children: Intended for younger children under the age of 8
yea/s Pays careful attention to themes that could th/eaten
their sense d security and weft-being.
When setting an individual content-based
rating item:
"l Press II_ or ENTER to access blocked content
items from the currently selected age based rating
item.
2
PressA/_"
to select an individual item, and then
press ENTER to unblock it ("t_" is removed). Repeat
the same steps tot the other items.
3
Press 4 or RETURN to register
content rating items are set.
C8+: Children over 8 years old: Contains no portlayal
of violence as the p/eferred, acceptable, or only way
to/esolve conflict: nor encourage child/en to imitate
dangerous acts which they may see on the screen.
G: General: Considered acceptable for all age groups
Appropriate viewing for the entire family, contains very little
violence, physical, verbal or emotional
PC: Parental Guidance: Intended for a general audience, but
may not be suitable for younger child/en (urlder the age d 8)
because it could contain controversial themes or issues
14+: Over 14 yea/s: Could contain themes whe/e violence
alter all individual
Content
I_L: Fantasy violence.
V: Violence.
S: Sexual situation.
L: Adult language.
D: Sexually suggestive
is one of the dominant elements ot the storyfine, but it
must be integral to the development d plot or character
Ianguage usage could be profane and nudity present
within the context of the theme,
dialog.
wY
[]
[]
[]
[]
[]
TV Y7
X
[]
[]
[]
[]
WG
[]
[]
[]
[]
TV PG
X
X
X
X
TV14
X
X
X
X
...............................................................................
_VMA
X
X
X
[]
: The content
normally
X : Content
18+: Adults: Intended for viewers 18 years and older and
might contain depictions of violence, which while related to
the development of plot, character or themes, are intended
for adult viewing. Could contain graphic language and
portlayals ot sex and nudity
rating can be set, but this rating is not
broadcast
by TV stations.
rating can be set.
23
On-Screen
Display
[] Canadian
French
Menu
Ratings
Example
Example [_
opt_or_
Press A/Y
to adjust the item to your desired position.
"t_" indicates the item is blocked. Press MENU to exit.
E: Exempt programming,
G: General: All ages and child/en, contains minimal direct
violence, but may be integlated into the plot in a humorous
or unreafistic manner.
8arts+: General but inadvisable for young children: May
be viewed by a wide public audience, but could contain
scenes disturbing to children under 8 who cannot
distinguish between imagina/y and real situations
Recommended for viewing with pa/ent
13arts+: Over 13 years: Could contain scenes of fiequent
violent scenes and therefo/e recommended for viewing with
parent
the V-CHIP
1 Press ENTER while the V CHIP is working, and
then the secret number selting menu displays.
the temporarily
You can reactivate the temporarily
BLOCK as shown below.
released
Press ,_/_' to select a specific
then press ENTER.
item and
3
Press A/T
(or _/_)
to select the desired
and then press ENTER.
4
Press MENU
adiustment
setting,
to exit.
Only".
you
This function displays the elapsed game time so you
do not lose track of the time. To display the elapsed
Input the 4 dig_ secret number by using (_9. At this
time V CHIP BLOCK temporarily
releases.
[] Reactivating
BLOCK
2
• The screen image will return to normal when a button
(except those for audio adjustment, such as VOL, MUTE,
SURROUND, AUDIO) is pressed,
BLOCK
When the V CHIP BLOCK is working and censors a
broadcast,
"V CHIP HAS BEEN ACTIVATED."
displays.
2
and then
When listening to music from a music program,
can turn the screen oll and enjoy audio only.
On: Audio is output without screen image,
Off: Both scleen images and audio are output
18arts+: Over 18 years: Only for adult viewing. Could contain
frequent violent scenes and extreme violence
release
Press MENU to display the MENU screen,
press 4/_,- to select "Option".
Skip this step for "Audio
16ans+: Over 16 yeals: Could contain frequent violent scenes
and intense violence
[] How to temporarily
1
time, select "GAME" for the AV MODE before starting
the game.
On: The elapsed time is displayed every 30 minutes when
V-CHIP
you switch to GAME mode in external input mode
Off: No adjustment,
released V CHIP
This function locks the operation buttons on the TV
and the remote control
Off: No adjustment,
RO Control Lock: All buttons on the remote control ale
locked,
• Select "Status" setting fiom the Parental CTRL menu to
reactivate BLOCK, (See page 22)
• Select "V Chip" setting ("MPAA", "_V Guidelines", "Can,
English Ratings" or "Can, French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 22 and
23.)
Switch oft the TV power
Button Control Lock: All buttons on the TV, except
POWER ale locked
To unlock the buttons on the remote contloL pleas MENU
on the T_/, and then select "Otf" on the MENU screen,
To unlock the buttons on the T_/, press MENU on the
remote control, and then select "Off" on the MERU screen,
Performing any of the three above will activate the V DHP
BLOCK
24
On-Screen
Display
Menu
If the image does not come in clearly from the external
equipment
connected
to INPUT 1, you may need to
change the input signal type setting from the list below:
Auto/COMPONENT/VIDEO
This function allows you to adjust the closed
caption screen appearance
to su[t your preference.
You can adjust 7 items: "Caption Size", "Font
Style", "Foreground
Color", "Foreground Opacity",
"Background
Color", "Background
Opacity" and
"Character Edge".
Example:
Selectable items available for "Font Style".
Default: The font specified by broadcasting station or
default font.
If the selected signal type is incorrect, images are not
displayed at all or are displayed without any color
• Refer to your external equipment operation manual for the
signal type
• Ifyou set INPUT 1 to Auto, the TV will automatically select
the input signal
• Setting iNPUT 1 signal selection to "Auto _'when other
equipment is connected will result in the following
connection priority
INPUT f:
COMPONENT VIDEO
_', VIDEO
Type O: Proportional font used in the MENU screen
Type f: Monospaced with serifs.
Type 2: Proportionally spaced with serifs
Type
Type
Type
Type
Type
To watch an HDMI or PC-IN equipment
image, select
"INPUT4" or "INPUT5" from "INPUT SOURCE" menu
using INPUT on the remote
Auto View:
control
Monospaced without serifs
Proportionally spaced without serifs,
Casual font type,
Cursive font type
Small capitals.
• For resetting adjustments to the factory preset values,
press A/_' to select "Reset", and then press ENTER.
The default value depends on the broadcasting station
unit or on the TV.
Enable: To use View Mode based on signal
recognition, including an HDMI signal
Disable: No function
Audio Select:
This function allows viewing of digital closed caption
information for the digital broadcast program being
viewed.
Digital: For an audio signal via the HDMI telrninal
Analog: For an audio signal via the R AUDIO L
terminal
This list is not displayed for analog broadcasts or external
input audio/video,
This information is not included in OO1,002, Text1, or
Text2, and is not displayed in a list
• Refer to your external equipment operation manual for the
signal type
• "Audio Select" is only available for INPUT 5.
When connecting an HDMI DVI conversion adapter/cabb
to the HDMI terminal, the image may not come in clearly
Select the CH display when changing
digital broadcasting.
Yes: "Program Info " displays.
No: "Program Info." does not display
Allows you to select what controls the audio output.
Fixed: Sound via speaker is adjusted with VOL+/on
the remote control unit or VOL - / + on the %/
Sound via the AUDIO OUTPUT terminal is not
adjustable and outputs at a consistent level
Variable: Sound via the AUDIO OUTPUT terminal is
This function
adjusted with VOL +/on the remote control unit or
VOL-/+
on the %/.
Sound via speaker is muted
Select the video signal system compatible
equipment
from the list below:
Auto/NTSC/PAL- M/PAL- N
3:
4:
5:
6:
7:
allows you to program
channels
for
4 favorite
channels, in 4 different categories.
By setting the
favorite channels in advance, you can select your
favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER Press _k/_'/_/
_- to select the position in the category, and then press
ENTER to register
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press
_/_/_i/_
to select the channel you want to delete, and
then press ENTER, Select "Yes" and then press ENTER
To delete all the favorite channels, select "All Data Clear"
with your
"Color System" can only be set for the INPUT 1 VIDEO and
INPUT 2.
Ifyou have already set the Secret No., input the 4 digit
secret number here See page 22 for setting a secret
number
• Before setting the channel, select the channel you want to
register as a favorite channel
25
On-Screen
This setting
Digital
Display Menu
allows
you to optimize
the settings
This function allows software updates by inserting
a USB memory device with the update file into the
SERVICE terminal on the %/.
of
broadcasting.
To check for the availability of a software update, visit
www.sharpusa.com.
If you have any questions, please
call 1 800 BE-SHARP (800 237 4277).
Example
[ _]
Digital Setup
1
Press MENU to display the MENU screen,
press _1/_- to select "Digital Setup".
and then
2
Press A/_'
toselect
a specific
and then press ENTER.
item,
3
Press A/_'
(or 4/_-)to
and then press ENTER.
4
Press MENU
adjustment
select the desired
Do not remove the USEI memory device or unplug the
AO cord while the software is being updated,
• Be sure to properly follow the whole procedure
described below, step by step, Otherwise, for
example, the TV cannot read the data in the USE
memory device and software updating will fail,
1
Insert the USB memory device with the update file
into the SERVICE terminal on the %/.
2
Press MENU to display the MENU screen,
then press _/1_ to select "Digital Setup".
3
Press
press
setting,
to exit.
You can output digital audio to an AV amplifier or
similar device whose DIGITAL AUDIO INPUT terminal
is connected
to the DIGITAL AUDIO OUTPUT terminal
on the %/. Please select an audio output format
compatible
with the audio format of the program you
are watching and the equipment
connected.
PCM: The optical output terminal outputs audio signal
in PCM form. If your digital audio system does not
support Dolby Digital, select "PCM"
Dolby Digital: The optical output terminal outputs audio
signal in Dolby Digital form. It reproduces sound from
surround program of digital
version
of the TV software
Update",
and then
If you have already set the Seclet No, go to step 4
[_
The current
A/T
to select "Sottware
ENTER.
and
Digital
Setup
is displayed.
Software
4
5
26
Input
the
_
Digital
Update
4 digit
j
secret
number
by
using
0-9.
Setup
Press ENTER to start checking
USB memory device.
the data in the
On-Screen
6
Dudng
Display Menu
the data checking,
"CheckEng"
7 PressENTER
bIFnks.
to start updating.
The screen becomes dark for a while until the update
screen can be displayed, Please wait for the update
screen to appear Do not unplug the AC cord
The current version of the %/softwale and the ve/sion
of the update file on the USB memory device are
displayed To update the %/software with the update
file, select "Yes", and then press ENTER
!
Example
Example
Do not remove the USR memory device or unplug the
AC cord while the software is being updated,
• If the USB memory device is not properly instafled or
the cor/ect update file cannot be found on the USB
memory device, an erlor message is displayed.
Check the file on the USB memory device, and then
re]nsert the USB memory device correctly
8
When the sottware is succesdufly
updated, a
screen is displ_yed EndEcating that the update
process is completed.
After thEs screen is dEsplayed, the TV automatically
turns off and then turns on again.
• If the update has failed, check the file in the USB
memory device and try So.rare Update again
9
10
27
After the screen shown
ENTER.
Remove
below is displayed,
the USB memory
device.
press
Appendix
Problem
Possible
Solution
• NO power
Check if you pressed POWER on the remote control unit. (See page 12) If the
indicator on the %/does not light up, press POWER on the %/
is the AC cord disconnected? (See page 7,)
• Has the power been turned on? (See page 12)
• Unit cannot be operated
• External influences such as lightning, static electricity, may cause improper ope/ation.
in this case, operate the unit affer first turning oft the power of the %/or unplugging
the AC cord and replugging it in after 1 or 2 minutes
Remote control unit does not
operate
Are batteries inserted with polarity ( J,
) aligned? (See page 8)
Are batteries worn out? (Replace with new batteries.)
Are you using it under stlong or fluorescent lighting?
is a fluorescent light ilk_minated near the remote control sensor?
• Picture is cut off/with sidebar
screen
•
• Is the image position corlect? (See page 21 ,)
Are screen mode adjustments such as picture size made correctly? (See page 16.)
Stlange color, light color, or color
misalignment
Adjust the picture tone. (See pages 18 and 19)
• Is the room too bright? The picture may look da/k in a room that is too bright.
Check the input signal setting (See page 21 )
Power is suddenly turned off
Is the sleep timer set? (See page 13)
• Check the power contlol settings. (See page 20)
The unit's internal temperature has incleased Remove any objects blocking vent or
clean,
NO picture
• Is connection to other components cor/ect? (See page 11 )
Is correct input signal source selected after connection? (See page 25)
• Is the cor/ect input selected? (See page 25,)
Is pictule adjustment correct? (See pages 18 and 19)
• Is "On" selected in "Audio Only"? (See page 24.)
o Is a nomcompatible signal being input? (See page 30,)
• Nosound
• Is the volume too low? (See page 13)
Is "Variable" selected in "Output Select"? (See page 25)
Have you pressed MUTE on the remote contlol unit? (See page 13)
• The %/sometimes
clacking sound
The error message
makes a
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature This does not affect the %/'s
performance
about reception
The example of an error message
displayed on a screen
of broadcast
Error code
Possible
Solution
Failed to receive broadcast,
E202
• Check the antenna cable Check that the antenna is correctly
setup.
No b/oadcast now,
E208
• Check the broadcast time in the program guide,
Cautions
regarding
use in high and Jow temperature
environments
• When the unR is used in a low temperatu/e space (eg. room, office), the picture may leave trails or appear slightly delayed
This is not a malfunction, and the unit will recover when the temperature returns to normal
• Do not leave the unit in a hot or cold location, Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to defofrrl and the Liquid Crystal panel to malfunction,
Storage temperature:
4°Fto
140°F(
2O°Oto I 6O°C)
28
Appendix
Item
Model:
LCD panel
Resolution
Receiving
Channel
(CCIR)
American %/Standard
VHF/UHF
VHF2
CA%/
ATSC/NTSC System
1 135ch (non scrambled channel only)
13ch, UHE 14 69ch
Digital
Terresltlal
Broadcast
(SVSE 2 690h
Digitalcable"1
(64/256QAM)
Audio multiplex
Backlight
1 1_35ch(non scrambled channel only)
BTSC System
60,000 hours (at Backlight Standard position)
Audio out
Terminals
Model: LC-87SB24U
37" screen size class Advanced Super
View & BLACK TFF LCD
(Diagonal Measurement : 37")
1,049,088 pixels (1,366 >{ 768)
TV standald
%/
Function
LC-82SB24U
32" screen size class Advanced Super
View & BLACK TFT LCD
(Diagonal Measurement : 31 1/2")
lOW x 2
Rear
INPUT 1
AV in, COMPONENT in
INPUT 2
AV in, S VIDEO in
INPUT 3
COMPONENT in
INPUT 4
HDMI in with HDCP
INPUT 5
Audio in, HDMI in with HDCP
INPUT 6
18 pin mini D sub female connector, Audio in (0 38 mm jack)
ANT/CABLE
78 (--)Unbalance, F Type × 1 for Analog (VHE/UHF/CATV) and Digital (AIR/CABLE)
DIGITALAUDI0
OUTPUT Optical Digital audio output
OUTPUT
Audio out
SERVICE
Softwale update
OSD language
Englisfv'FrencWSpanish
Power Requirement
AC 120 V, 60 Hz
Power Consumption
Weight
× 1 (POM/Dolby Digital)
135 W (0 3 W Standby with AC 120V)
165 W (0 8 W Standby with AC 120V)
TV + stand
298 Ibs./13 5 kg
858 Ibs/16 0 kg
TV only
254 Ibs./l 15 kg
809 Ibs/140
Dimension,S
TV + stand
30 9/16 X 22 41/64X 9 lh6inch
35 19/s2>_ 25 s/s2 × 9 1/16inch
ON )_ H X D)
TV
30 9/16 X 2019/32 X 3 45/_ inch
Operating temperature
on_
32°Fto
104°F(0°Cto
kg
35 19/32_ 23 Vs2 x 3 s/4inch
40°C)
Emergency alert messages via Cable ale unreceNable.
The dimensional drawings ale shown on the Spanish operation manual,
As par[ of policy of continuous imp/ovement, SHARP reserves the right to make design and specification changes for product
imp/ovement without prior notice The performance specification figures indicated are nominal values of production units,
There may be some deviations flora these values in individual units
The listed optional accessory is available for the Liquid
Crystal Television. Please purchase it at your nearest shop.
Additional optional accessories may be available in the near
future. When purchasing, please read the newest catalogue for
compatibility and check the availability
29
I
wail m°_nl blacke{
i
AN 87AG5
1
it is necessary
to set the PC correctly
to display
Resolution
PC
VGA
Frequency
signal
Reter to page 21 to set PC input signaFs.
Vertical
VESA Standard
Frequency
720 x 400
31 5 kHz
70 Hz
640 x 480
31 5 kHz
37 9 kHz
37 5 kHz
60 Hz
72 Hz
75 Hz
O
O
O
351
37 9
481
469
484
56
60
72
75
60
Hz
Hz
Hz
Hz
Hz
O
O
O
O
O
70 Hz
75 Hz
60 Hz
O
O
O
SVGA
800 x 600
XGA
1024 x 768
WXGA
1360 x 768
PC
XGA and WXGA
Horizontal
kHz
kHz
kHz
kHz
kHz
565 kHz
600 kHz
47,7 kHz
%hese 3 formats are not supported by the analog RGB terminal,
Power Management is a registered trademark of Sun Microsystems, Enc.
I VGA
DC and
is a registered
trademarktrademarks
of Video Electronics
Standards
Assodation
XGA are registered
of International
Business
Machines Corp,
[] Software
composition
The soflware included in this product is comprised
are held by SHARP or by third parties.
of various
sottware
1
components
whose
individual
copyrights
[] Software
developed
by SHARP and open source
software
The copyrights for the software components
and various relevant documents
included with this product that were
developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,
and other relevant laws. This product also makes use of freely distributed software and software components
whose copyrights
License (hereafter
are held by third parties. These include software components
covered by a GNU General
GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.
Public
[] Obtaining
source
code
Some of the open source softw_re licensors require the distributor to provide the source code with the executable
software components.
GPL and LGPL include similar requirements.
For intormation on obtaining the source code
for the open source software and for obtaining the GPL, LGPL, and other license agreement
information,
visit the
following website:
http://wvcc_.sharpusa.com/gpl
We are unable to answer any questions about the source code tot the open source sottware.
the sot_are
components
whose copyrights
are held by SHARP is not distributed.
[] Acknowledgements
The following open source software components
linux kernel/busybox/uClibc/zlib/libpng/libjpeg
CLEARING
THE
If you forget
the secret
1
2
Press MENU
Press A/T
Update",
;3
SECRET
The
clear the secret number
to select "EZ Setup",
and the Secret number
secret
As a p/ecautionaw
number
code for
in this product:
NUMBER
number,
to display the MENU
Press and hold both
are included
The source
CH/\
screen,
using the fallowing
and then press
"CH Setup", "Parental
input
_/1_
CTRL",
procedure.
to select "Setup".
"Reset",
"Color System"
or "Software
screen displays.
and VOL + on the TV simultaneously
until the message
appears
on the screen.
is
measure, make a note of your seclet number above, cut it from this manual, and keep it in a safe place
3O
Calling for Service
For location of the nearest Sharp Authorized Service,
customer assistance, please call 1 800 BE SHARP.
LiMiTED
CONSUMER
SHARP
LIMITED
either
when
repair
purchaser
This
for
_en
removed,
the
non
for
commercial
To
the
extent
implied.
IMPLIED
apply
or
rights
se_icer,
Sp_iflcally
WARRANTIES
PURPOSE
ARE
by
ALL
this
proof
or
warranties
available
given
to
the
permitted.
liabilities
and
whether
based
responmlble,
lack
of
be
on
for
or
Your
of
w hloh
care,
or on
LIMITED
Model
in
remedies
for
sole
the
the
been
or
for
breach
IS
date
VALID
in
or
Liquld
Crystal
and
Display
agr_s
that
equlvalent
product
it will,
at
no
charge
at
its
(the
option,
to
or
cover
number
inmtallatlon
mettlng
or
model
or
residence.
to cover
or
signal
appEicatlon;
If you
your
affixed
use
the
reception
this
intend
of this
to
the
to
has
problems.
warranty
This
is meant
or already
Product,
Product
use
the
terms
able
to
solely
this
Product
of which
met forth
abuse
or
forth
of
below.
(including,
LAW,
Y_u
by
other
the
must
but
not
not
by
in such
be
provide
may
pr_f
of
express
or
be
may
sole
full
be
satlsfactlon
any
or
of
are
defects
Nor
not
all
clalmm
negligence,
or
do
of
all
way
misuse,
se_icer.
states
remedy
anyone
in any
damages
authorized
not
exclusive
by
BE
DATE
OF
RIGHTS
fulfillment
accident,
or
VALIDLY
made
liable,
Some
DISTRICT
and
complete
voltage),
a Sharp
NOT
FROM
THE
HAVE
OTHER
promises
Sharp
dan]age.
herein
the
constitute
shall
maintenance
than
THE
EXPRESS
AND
FOR
A PARTICULAR
MAY
constitute
improper
or
warranties,
ALL
FITNESS
or
shall
property
limits
STATES_
shall
shall
nor
to,
other
or
the
and
and
other
WARRANTIES
herein,
limited
all
TO THE
PERIOD(S)
YOU
MAY
ALSO
representatlonm
operation
states,
UNITED
Sharp
warrant
anyone
economic
of,
ARE
EXCLUDED,
FOR
USE,
AND
IMPLIED
Product,
improper
exclusive
LIMITED
RIGHTS.
described
does
performed
and
ABOVE
FITNESS
No
to
Sharp
(50)
of,
granted
time
respect
oonmequentlal
FIFTY
met forth
lleu
FORTH
herein.
period
transactions;
in
STATE
mlsume,
repairs
steps
WARRANTIES
IS
SPECIFIC
LEGAL
ot he_wlse.
tampering,
THE
are
warranties
the
with
or
to
the
purchase.
set
for
incidental
IN
brand
matenals,
remanufactured
number
not
home
follow
APPLICABLE
purchaser
certain
of
exclusive
liability
subj_t
ONLY
does
THAN
THOSE
SET
OF MERCHANTABILITY,
periods
and
attempted
any
Sharp
and
or
serial
available
should
SUCH
IMPLIED
GIVES
YOU
and
modification,
repairs
this
new
in a commercial
in their
warranties
UNDER
time
manner
to
a
if the
warranty
used
warranties
you
the
the
IF,
strict
have
by
responsible
WARRANTY
Specific
Sharp
alteration,
caused
way
the
for
the
negligence,
Products
were
be
only
contract,
in any
warrantles
shall
and
defects,
re_ponslbilltles
which
liable
THIS
of
reasonable
Product
supplies,
information.
law,
EXCLUDED.
herein
purchaser
Correction
are
WARRANTIES
OTHER
THE
WARRANTIES
SPECIFICALLY
Thlm
is being
warranty,
include
state
with
or
by consumers
there
further
that
workmanmhlp
thereof
Product
with.
been
limited
purchaser
def_tlve
part
of the
Product
DISCLAIMED
OR
EXCLUDED,
THE
DURATION
OF
PURCHASE
SET
FORTH
BELOW.
THIS
WARRANTY
WHICH
VARY
FROM
STATE
TO STATE.
The
accessories,
below.
tampered
has
must
applicable
OTHER
INCLUDING
forth
setting,
o for
under
which
permitted
or
of the
consumer
from
or
items
Product
use
1-888-GO-SHAR_
your
set
altered
if the
first
be fr_
Product
appearance
in a commercial
the
will
def_tlve
perlod(s)
any
household
contact
to
the
the
to
to
container,
the
changed,
not
purposes
to enforce
purchase
for
apply
commercial,
Please
order
will
warrants
orlglnal
replace
labor
not
defaced,
warranty
for
In
in its
or
or
does
limited
vary.
CORPORATION
defect
parts
warranty
literature,
WARRANTY
shipped
the
product
WARRANTY
ELECTRONICS
"Product"),
or to obtai_
in the
shall
allow
Sharp
limits
on
apply.
OF
COLUMBIA
AND
PUERTO
need
metvlce
RICO.
Section
Product
Model
Number
& Description:
LC
32SB24U/LC
(Be
sure
37SB24U
to
have
this
LCD
Color
information
T_levlsk)n
available
when
you
for
your
Product.)
Warranty
Period
Additional
for
this
Exclusions
Warranty
Coverage
Product:
One
from
(if
(1) year
In order
any):
to
the
for
the
9
provided
Any
Image
Where
to
Obtain
Service:
to
do
to
Obtain
Sewice:
LC-87SB24U
Retention
of
on
From
a
location
Sharp
of the
unit
for
Ship
Sharp
The
Semlcer
prepaid
have
OBTAIN
PRODUCT
INFORMATION
from
the
not
_mage
this
Umffed
available
installation,
_nterfere
non
after
remove
by
re_nmtaL_
th_s
of the
being
inmtalla_
and/or
covered
for
(see
PURCHASE
OR
located
hodzed
will
_n the
Semlcer,
have
and
of
Product
United
please
damage.
or
return
If
States.
To
call
Sharp
find
the
toll fr_
and
the
se_vlce
for
www.shar
ensure
shall
AND
EXTENDED
WARRANTIES,
pusa.com
SHAI' P
SHARP ELECTRONICS
CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
tMs
remove
met
Authorized
ship
two
damage
home
ff necessary
to
the
you
once
avallable.
you
use
Sharp
for
in
and
and
Purchase
Please
packaging,
obtain
location
to a Sharp
available.
mail
to
your
facll_ty
securely.
original
misdirected
to
Proof
in your
purchase
scratches
SedUcer
come
Semlcer's
to
carry
of
it in its
or
Authorized
packaged
ACCESSORIES
VISIT
_ong
Operation
this).
to
the
that
not
the
Servicer.
Be
be
sure
Product,
persons
to
the
be
carry
the
Product
CALL
it
is covered
responsible
product
sure
Product,
incurred
shipping.
OR
a
warranty,
consumer.
d_mp_ayed
Warranty
wlth
setvlce,
standard
responslbi_ty
fixed
by
readily
Product
or
to
are
the
be
nomstandard
unreasonabEy
required
are
a
must
or
a complex
foregoing
Servicer
Sharp
Aut
the
sure
or
proof
and
avoid
stolen
at
Be
transport
TO
Product
would
_nto
and
purchase.
remount
matedaEs
the
of
complex
will
covered
Authorized
nearest
repalr
insured
to
and
not
the
any
which
charges
prevent
your
completed.
__
of
date
1 800-BE-SHARR
product.
to
is
to
the
setvlced,
is not
resulting
t_me
how
from
Se_icer
beyond
addlt_onaE
Manual
Contact
LC-82SB24U
labor
and
in
be
c_ear
The
remounting
add_tlonal
perlods
at
What
such
above
result
labor
encumbrance
Product.
that
Product
may
and
other
the
days
to
free
or
setvlcln
90
Product
servicer,
mounting
rich.
pa_s,
1-800-BE-SHARP
for
lost,
during
is
SHARP
LIMITED WARRANTY
Consumer Electronics
Products
Congratulations
on your purchase!
Sharp Elect ro_,_cs of Ca_,ada Ltd. (hereinalfer called "Sharp") gives the following express warranty to the first consume_ _urchaser for ths
Sharp brand product, when shipped in its origin,el container and sold or distributed in Canada by Sharp or by an Authorized Sharp Dealer:
Sharp warrants that ths product is free, under normal use and maintenance, from any defects in rnalerlal and workmanship. If any SUCh
defects should be found in th_s product within the applicable wa_raniy _eriod, Sharp shall, at its option, re_air or replace lhe product as
specified herein.
This warranty shall not apoly lo:
(a) Any defects caused or repafrs required as a result of abusive operation, negligence, accident, improper installation of nappropnate
use as ou_ined ir_the owner's m_nual,
(b) Any Sharp product tampered with, modified, adjusted or repaired by any parly other than Sharp, Sharp's Authorized Service Centles
or Shar_s Auihodzed
Servicing Dealers.
(c) Damage caused or repairs required as a resuli of the use w_lh _tems not specified or approved by Sharp, including but not limited to
head cleaning tapes and chemical clean_ng agents.
(d) Any replacement of accessories, glassware, consumable or perLpheral items re_u_red through normal use of the product including but
not limited to earphones, _emote conirols, AC adapters, batteries, temperature probe, stylus, trays, fillers, bells, ribbons, cables and
paper.
(e) Any cosmetic damage to the surface ol exterior that has been defaced or caused by normal weal and leal.
(f) Any damage caused by external or environmental
conditions, including but not limi[ed to transmission
I_ne/power line voltage el liquid
spillage.
(g) Any product received withou_ applopr_a_e model se#al number and CSAfeUL markings.
(h) Any products used for rental or commercial purposes.
(_) Any inslallation, setup and/or programmlng
chalges.
Should tMs S_arp product feil to operate during the warranty pe#od, warranty seHEce may be obtained upon delivery of the Sharp product
together w]lh proof of pu[chase
and a copy of this LIMITED WARRANTY
statement to an Authorized Sharp Service Centre or an
Autho#zed Sharp ServLcing Dealer. In home warranty service may be provided a_ Sharp's d_scretion on any Sharp television with 1he
screen size of 2T' or larger and on any Sharp Over4he-Range
M_crowave Oven.
This warranty conshtutes the entire express warranty granted by Sharp and no other dealer, service centre or thek agent or employee is
authorized to extend, enlarge or transfer this warranty on behalf of Sharp. To the extent the law permit& Sharp disclaims any and all
_iabJlty fel direct or indirect damages or losses or for any incidental, special or consequential
damages or loss of profits resulting from a
defect in matedal or workmaf_ship relating to the p_oduct, includh_g damages for the loss of t_me or use of th_s Sharp product or the loss
of information. The purchaser will be responsible for any femoral, re]ns_allation, transportation
and insurance costs h_curred. Correction of
defects, in the manner and pei_od of time descnbed hereir*, constitule
complete fulfillment of all obligations and responsibilities
of Sharp
to the purchaser wilh respect to the producl and shall constitute full satisfecflon of all claims, whether based on contract, negligence, strict
liab_l ty or otherwise.
WARRANTY
PERIODS:
Par_s & Labour (exceplions noted)
I year
I yea_
I yea_
I yeal (lamp 90 days)
I yeal
I year (magnetron component-4
addittonal
1 year
1 year
Audio P_oduct
Camcorder
DVD Producl
Pio_ector
LCD TV
Microwave Oven
Air Purifier
Portable Air Conditioner
SHA[_P _L_C I RelIcS
For
Offers,
more
Sharp
information
Canada
on
this
Products,
Locations,
Visit
our
Revision
O£ CANADA
];1_
Warranty,
Accessory
335 Bril_l_i_, ;4o_d E_s_,M_i_sa_,
Sharp
Extended
Sales,
please
cag
(905)
568-7140
Web
site"
www
sharp
ca
12/16/05
32
Dealer
On_rlo _Z
years)
_W_)
Warranty
or
Service
SHARP
_
_.
-I
._