Bosch K2200 Series Specifications

2000-SERIES
Hardware Products Catalog
READYKEY
™
COMPATIBLE
The Certified Dealer Program
PAC has a track record of helping security resellers build businesses around the access control product line.
Available in the US since 1992, both Radionics and later Bosch Security relabelled both our original hardware and software (PAC
for Windows) which we continue to supply as ‘Compatible with Readykey ’. Today PAC continues to add value through
innovative, affordable solutions and a compelling vision of the future of access control.
TM
As a trusted partner, we provide you and your customers with financial stability, a broad range of security products only available
to authorized partners, superior service and support, and a commitment to the access control market. We are highly selective:
We work with only a limited number of Certified Dealer for participation in our programs.
Why PAC?
Flexibility. Innovation. Simplicity. Commitment.
PAC’s core philosophy is to provide our partners with solutions focused on the needs of the individual users within their
customer’s business. That’s what sets us apart. We ensure that customers can evolve, update and migrate their existing
Radionics or Bosch security solutions over time and at their own pace, without disrupting or replacing their existing
infrastructures. Flexible and expandable, PAC solutions are outstanding in their ability to integrate old and new, so that
customers can future-proof and build their systems based on their own migration paths.
The migration commitment that we make to every customer plays a strong part in our overall business philosophy. Today,
over half of our new 500 series controller shipments worldwide are used with systems that already have installed legacy
K2000 series based controllers and software.
3
CERTIFIED DEALER
Contents
Page
PC Software
PAC for Windows (Compatible with Readykey for Windows).................4
PAC Vision.................................................................................5
Stanley PAC ..............................................................................6
Door Controllers and Accessories
K2200/K1200 Door Controller Series .....................................10
Door Controller Accessories...................................................13
K2015B Alarm Event Manager ...............................................14
K2012 Wiegand Interface.......................................................15
Credentials
Proximity Cards .......................................................................16
Proximity Key Fobs and Tags ..................................................17
K2000-Series/D8200-Series 153KHz Readers
K2001 Low Profile Reader ......................................................18
K2002 Vandal Resistant Reader .............................................19
K2001-P Reader with PIN Keypad ..........................................20
K2001-SP Surface Mounted PIN Reader................................21
K2003 Mullion Reader............................................................22
D8201 Low Profile Reader (Wiegand) ....................................23
D8203 Mullion Reader (Wiegand)..........................................24
Reader Accessories ................................................................25
K3000-Series/D8300-Series 125KHz Readers
K3001/D8301 Low Profile Reader ..........................................26
K3002/D8302 Vandal Resistant Reader .................................27
K3003/D8303 Mullion Reader................................................28
K3004/D8304 Extended Range Reader ..................................29
Enrollment/Interface Accessories
TM
Desktop Administration Kits...................................................30
CNCII and Accessories
K6100 and K6300 CNCII Series ......................................................31
PAC FOR WINDOWS
Important Note: PAC for Windows (Compatible with Readykey for
Windows®)sold in the US by Bosch and Radionics has now been superseded by
Stanley PAC (Formally Readykey X ).
TM
TM
License upgrades continue to be available for existing site maintenance only.
Use Stanley PAC for both new installations and the conversion of existing systems.
FREE DATABASE CONVERSION. All existing sites can be converted to Stanley PAC using
all existing hardware and existing cardholder credentials do not need to be re-enrolled.
Call us on 800 414-3038 to arrange the conversion.
Ordering Information
Software Upgrades and Options
The following software upgrades require the application software to enable the modules.
Description
Legacy Part#
ADI Part #
18,000 Users, requires18K Personality Module
(works with 2100 and 1100 controllers only)
K6110-18K
7S-K611018K
One Additional Division License Upgrade
K6110-DV
7S-K6110DV
K6110-L
7S-K6110L
Photo ID Badging License Upgrade
K6110-PID
7S-K6110PID
One Additional Remote Site License Upgrade
K6110-S1
7S-K6110S1
One Additional LAN Workstation License Upgrade
What is PAC for Windows?
In 1992, Radionics and PAC were owned by the same company.
Radionics launched PAC products in the USA by simply rebranding the
hardware and software that ships in the rest of the world under the
PAC name as Readykey . The software is identical to PAC for
Windows but has a different splash screen and US localization. At the
same time PAC hardware such as the 2200 was relabelled and supplied
as the K2200.
TM
4
Visit us at...
www.stanleypac.com
READYKEY
™
COMPATIBLE
READYKEY
™
COMPATIBLE
TM
PAC VISION
READYKEY
Important Note: PAC Vision (PAC Prism) previously sold in the US by
Bosch has now been superseded by Stanley PAC.
License upgrades will continue to be available to maintain existing
installations.
™
COMPATIBLE
FREE DATABASE CONVERSION. Use Stanley PAC for both new installations
and the conversion of existing PAC Vision systems. Call us on 800 414-3038 to
arrange the conversion.
PAC Vision Ordering Information
Description
Door Upgrade License (64)
Legacy Part #
ADI Part #
K6410-16-64
7S-K641064
K6410-64-128
7S-K6410128
Increases the number of doors to 64.
The upgrade is delivered through e-mail.
Door Upgrade License (128)
Multiple Site with Central Network Controllers
Increases the number of doors to 128.
The upgrade is delivered through e-mail.
Door Upgrade License (256)
10
K6410-128-256
8
11
K6410-CL
7S-K6410CL
11
4
11
K6410-PID
7S-K6410PID
13
1
K6410-CCTV
2
14
16
7S-K6410CCTV
Serial ASCII commands.
The file is delivered through e-mail.
PAC Prism Upgrade Ordering Information
1
Desktop administration kit
2
Client PC (credential enrollment)
3
Network interface
4
K2100 Door Controller
Description
Legacy Part #
ADI Part #
5
K2200IP Door Controller
PAC Prism to PAC Vision Upgrade Kit
K6400-PV1UK
7S-K6400PV
6
Wide-area network (WAN)
7
Local-area network (LA N)
8
Host PC
9
RS-232
10
CNC (Up to 32 door controllers)
11
PSTN modem
12
K2100 Door Controller (Master)
13
K2100 Door Controller (Slave)
14
K2200 Door Controller (Slave)
15
K2200 Door Controller (Master)
Includes PAC Vision 2.0 software CD and Dongle
12
3
Photo ID options (for each workstation).
The file is delivered through e-mail.
Universal CCTV Driver License
5
7
Additional client license (for each workstation).
The file is delivered through e-mail.
Photo Badging License Upgrade
6
7
Increases the number of doors to 256.
The upgrade is delivered through e-mail.
Additional Client License
9
7S-K6410256
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
5
Stanley PAC | Flexible, Yet Comprehensive Architecture
Our ‘Continuously Current’ philosophy ensures our customers have a path to the new Stanley PAC
READYKEY
platform, thereby allowing you to utilize and protect your previous investment.
COMPATIBLE
This proven migration solution strategy effectively resists system obsolescence and adds new
capability to our customers’ systems by simply replacing older components with new hardware,
software and added functionality. This enables the newest capabilities available to work alongside existing hardware and
software seamlessly at very attractive prices.
™
The Stanley PAC migration solution minimizes the cost, risk, and process downtime of a full system replacement.
No Rewiring, No Re-Enrollment of Cardholders, No Lengthy Downtime, No Risk.
Our Migration Solution is the only solution specifically designed to avoid the high cost, high risk, and extended downtime of
typical replacement solutions.
COMPANY HEADQUARTERS
ALARM MONITORING
WORKSTATION
OEM INTERFACE
(HR, TIME AND ATTENDANCE, ETC)
CLIENT WORKSTATION
ENROLLMENT WORKSTATION
ID BADGE PRINTER
USB ENROLLMENT
READER
USB ENROLLMENT
READER
LAN/WAN
PAC 500 ACCESS
AND ALARM SERVER
PAC 500 ACCESS
AND ALARM SERVER
RS-485 (CHANNEL 1)
RS-485
(CHANNEL 2)
RS-485 (CHANNEL 1)
RS-485
(CHANNEL 2)
BRANCH OFFICE
ELEVATOR CONTROL
AUXILLARY INPUT
(1 PER DOOR CHANNEL)
12 FLOORS PER PAC530.
(MULTIPLE CONTROLLERS
CAN BE COMBINED)
PAC 512
PAC 530
AUXILLARY OUTPUT
(1 PER DOOR CHANNEL)
DOOR OVERRIDE INPUT
CASE TAMPER INPUT
REQUEST-TO-EXIT
DOOR CONTACT
DOOR CONTACT
P
S
U
ELEVATOR CAB
12/24V DC
PAC 512
PAC 512IP
ENTRY
READER
ENTRY
READER
EXIT
READER
CAB READER
RET
TM
K2100/K2200 C
+-
+-
LOCK POWER
OUTPUT
LOCK POWER
OUTPUT
PAC 512
DOORS 5 TO 30
PAC 520
OR PAC 530
CONTROLLERS
PAC 512
I
N
P
U
T
S
PAC 512
DOORS 23 and 24
UP TO A MAXIMUM OF 48 ADDITIONAL CONTROLLERS, MULTI-DROPPED ON THE RS-485 BUS
O
U
T
P
U
T
S
CONNECTION OF ADDITIONAL SYSTEMS
VIA INPUT AND OUTPUT CONTROLLER
READYKEY
™
COMPATIBLE
TM
Stanley PAC is one of the few access control system providers that manufacturers its own
hardware, controllers, readers, cards and keys are manufactured in our award winning ISO
certified facilities. Tens of thousands of organizations around the world place their trust in
access control systems manufactured by PAC. For 30 years, we have built complete, end-to-end
solutions specifically for our installers, rather than repurposing large enterprise solutions, which
remains a key differentiator between PAC and our competition.
The end goal is to help our customers stretch their dollars further as they strive to meet their
unique business needs.
Stanley PAC is backward Compatible with Readykey supporting all the classic K2100 and K2200
TM
door controllers, readers, credentials, CNC’s and AEM’s. In addition, Stanley PAC supports the
new 500-series controllers which can co-exist with a network of 2000-series controllers.
ADV
STANLEY PAC HOST
CNC CENTRAL
NETWORK CONTROLLER
7
PRO
DVR
IP CCTV
Complete Choice
Flexible Approach
BUILDING ONE (ORIGINAL INSTALLATION)
FLOOR 1
SLAVE CONTROLLERS
2 - 32 ON 6-WIRE BUS
SLAVE K2100/K2200
DOOR CONTROLLER
ALARM EVENT
MANAGER
FLOOR 2
RETROFITTED K2100/K220
DOOR CONTROLLER
2 - 8 ON 6-WIRE BUS
The result, Stanley PAC is designed to maximise productivity, enable mobility,
secure business locations, accommodate disabled users and much more. This
modular platform supports virtually any environment from existing legacy K2000
series systems to next generation converged IP infrastructure. At Stanley, we
believe it is about knowing what’s needed and how it will be used.
INPUT: 10.5-28.0VDC; 0.18A
(CONTROLLER ONLY)
RETROFITTED K2100/K2200
DOOR CONTROLLER
(PAC 512IP + PAC 512)
INPUT: 10.5-28.0VDC; 0.18A
(CONTROLLER ONLY)
0V
TX
RX
RS-232
CTS
CONTROLLER RETROFIT KIT
DTR
TROKIT
When customers present us business challenges such as using one access card
throughout the world, converging access control securely onto the IT network or
enabling international companies to standardise worldwide sites with local
language systems, Stanley gets creative.
0V
TX
RX
CTS
DTR
RS-232
BATTERY
RS-485
+-
+-
+-
+-
BATTERY
BATTERY
BATTERY
Access Control. Access Groups. Area Anti-Passback. Encrypted (SSL)
Communications. Built-in Firewall. Area Usage. 75,000 Keyholders. Integrated
Access and Alarm Functionality. Event-to-Action Manager. Intuitive user interface.
DVR Integration. Intrusion Detection
RS-232
ETHERNET
6-WIRE BUS
INPUT OR OUTPUT
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
77
ONE SIMPLE SYSTEM, YOURS TO CONTROL
Stanley PAC provides the most complete access control and
security solution for any enterprise regardless of size.
7
Backed by over 30 years of experience in security and access control
technology, PAC has been developed by Stanley to deliver a total security
READYKEY
™
Administration
Software
Stanley PAC
COMPATIBLE
solution that is expandable, flexible and most importantly easy to install
and use.
Visit us at...
www.stanleypac.com
© 2008 Stanley Convergent Security Systems
All Rights Reserved
A flexible yet comprehensive architecture ensures PAC suits the needs of
any facility, whether that be door control, card printing, interfacing to a third
party system, or any combination of these.
Ordering Information - Stanley PAC
Stanley PAC provides all the cardholder management tools you will ever
need, from enrollment in the system right through to administering separate
Stanley PAC Advanced
7S-PACADV
access rights for each cardholder.
Stanley PAC Professional
A list of impressive upgradeable features means Stanley PAC can be
easily tailored to suit the requirements of any facility.
The Digital Video Recording (DVR) interface takes advantage of the
latest in digital surveillance. Images captured provide a permanent
visual record of incidents occurring on-site. The DVR interface can be
configured to automatically link the event to the recording from a
specific camera and offers high quality images that can be viewed from
any client workstation in the network.
The OEM Interface enables communication with third party applications to
exchange common information, eliminating the need to enter identical data
into multiple applications – thereby improving operating efficiency and
reducing costs to an enterprise.
Our customers worldwide respect and value the quality of products and
services that Stanley offer. Manufactured under the world recognized
ISO9002 quality certification, rigorous manufacturing, testing and
certification procedures ensure that our products meet the highest
achievable standards, ensuring the longterm reliability of our products.
Visit us
us at...
at...
Visit
www.stanleypac.com
www.stanleypac.com
7S-PACPRO
READYKEY
™
COMPATIBLE
TM
Lite
Standard
Advanced
Professional
Stanley PAC Software Editions (with K2000 Support)
5,000
128
10
200
2
20
2
0
✔
0
0
5
0
0
50
10
✘
✘
✘
✘
✘
✔
✔
✘
✔
✔
✔
✘
✔
✔
✘
✔
✔
✔
25,000
250
25
1,000
5
20
5
2
✔
0
0
25
100
0
50
100
✔
✘
✔
✔
✘
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✔
✘
✔
50,000
750
50
2,000
10
100
10
4
✔
20
10
50
250
50
50
250
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✔
75,000
2,000
100
5,000
10
200
15
8
✔
100
100
100
500
250
100
500
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✘
✔
LT SE
ADV PRO
Cardholders
Doors
Operators
Access Groups
Holiday Profiles (20 per profile)
Time Profiles
Client PCs
Alarm Workstations
Unlimited IP Channel Support
Elevators Supported
Muster Points
Organizational Units
PAC 500 Channels
K2100/K2200 Controller Support
Direct Channels
Dial up Channels
Event To Action Manager
Remote Event To Action
Area Management
Alarm Management
CCTV Integration Support
Event Archiving
Audit Trail
Area Mode Profiles
Door Mode Profiles
Reader Mode Profiles
PAC 512 Support
PAC 520/530 Support
Photo ID Badging
Flexible Wiegand Card Formats
Visual Verification
Global Timezones
Access Options
Local Anti-passback
1
1
1
1
ADV
PRO
Contact Customer Services for equipment compatibility
Toll Free
Free Customer
Customer Service:
Service: 1-800-414-3038
1-800-414-3038
Toll
Customer Service
Service FAX:
FAX: 1-800-414-3039
1-800-414-3039
Customer
9
K2200 DOOR CONTROLLER SERIES
Functions
The K2200 Series Door Controllers includes the K1200, K2200, K1200IP
and K2200IP door controllers:
The front panel can be used to manage the system in stand-alone mode.
Order slave controllers on network systems without the front panel to
save money on larger systems. Create an access control system with door
controllers, readers, and locks. The power supply supplies power to the
locks and readers.
Features
Manage up to 128 operators and 10,000 cardholders
from a PC-based administration system
Manage up to 32 operators and 4,000 cardholders from stand-alone
mode
Five operating modes
Two K2000/K3000-Series readers or one Wiegand reader for each
door channel
Eight internal relays
10 Mbps Ethernet interface (K2200IP)
10
Visit us at...
www.stanleypac.com
Operating Modes
Stand-alone Mode. Manage the door controllers from the front panel.
Add up to three extra slave controllers, and control up to 16 doors.
Stand-alone mode requires a hard-wired communications link
between the master and the slave controllers
Slave Mode. Configure the door controllers to work as slave
controllers. Manage the slave controllers from another door controller
in stand-alone mode or from a PC-based administration system.
Local Master Mode. Configure the door controllers as local masters.
The local masters connect to the PC directly or through a PC Interface
Kit. Add up to seven additional slave controllers and control up to 32
doors.
Remote Master Mode. This mode is similar to the local master mode;
however, the master door controllers connect to the administration PC
through a Central Network Controller (CNC). CNC communications
occur through hard-wired devices (line drivers or fiber optic
transceivers) over RS-232, or through dial-up modems over PSTN or
TCP/IP.
Dial-up Mode. Program the door controller connected to the remote
site’s modem to dial-back to the CNC during an alarm event or during
selected access granted events.
Local CNC Mode. Each CNC can connect to 32 door controllers and
128 doors at its local site using a hardwired communications link.
Operators
Users can program up to 128 operators.
Door Monitoring
Full door monitoring is built into the door controllers. The door controllers
include inputs for Request-to-exit switches and door contacts. The standalone door controllers can store up to 32 individual time profiles. The door
controllers can store up to 128 individual time profiles. Use these time
profiles to control user access, door operation, and alarms.
Relay Operation
The K2200 Series Door Controllers have eight internal output relays.
Program up to eight relays. PC-based administration software lets users
program a relay to control lighting, operate a video camera, or sound an
alarm.
TM
K2200 DOOR CONTROLLER SERIES (CONTINUED)
Readers
The door controllers can connect two K2000-Series and K3000-Series
readers or one Wiegand reader to each reader channel. A K2012 Wiegand
Interface is not required to use most 26-bit Wiegand devices. K2012
Wiegand Interfaces are required for connecting two 26-bit Wiegand
format readers to a single door channel, or when using a Wiegand device
with a K2015A Alarm Event Manager (AEM) on the same reader channel.
Technical Specifications
Controller
Dimensions:
10 in. x 15 in. x 3.5 in.
(25 cm x 38 cm x 9 cm)
Weight:
6.2 lb (2.8 kg)
Alarm Monitoring
Enclosure
Add up to four K2015A or K2015B AEMs to a door controller. This allows
users to monitor extra inputs and to control outputs. All alarms can
immediately pass back to the system’s master or central point. If the door
controllers are connected remotely over a telephone line or TCP/IP,
configure the door controllers to automatically dial up the PC
administration system and inform the system of any alarms.
Dimensions:
Serial Output
Environmental Considerations
Relative Humidity:
0% to 90%, non-condensing
Temperature (Operating):
+32°F to +104°F
(0°C to +40°C)
Power Requirements
An RS-232 output is provided. When a printer uses the serial port, the
printer can print events from a stand-alone system. In a local or remote
master configuration, the serial port is used for communications.
Certifications and Approvals
Door Controller
K2200-LF
16 in. x 16 in. x 3.5 in.
(41 cm x 41 cm x 9 cm)
Approvals
UL 294, Access Control System Units
UL Canada
CE
Installation/Configuration Notes
Compatibility Information
Alarm Event Managers
K2015A and K2015B
Credentials
K2000 PAC Series and KeyPAC 3000 Series
Wiegand Interface
K2012
Readers
Readykey/PAC, KeyPAC, and 26-bit Wiegand
Note:
Use the K2108 Faceplate with K2000 Series
credentials and the K3108 Faceplate with
K3000 Series credentials
Technical Specifications
Cardholders
Standard Memory Module:
Optional K2205-50K Cardholder
Upgrade Module
(Standard on K2200IP-LF)
PC based administration:
up to 10,000
Stand-alone faceplate
administration: up to 4,000
PAC for Windows systems:
up to 18,000
Stanley PAC and PAC Vision
systems: up to 50,000
Voltage (Output):
12 VDC at 2 A switchable to
24 VDC at 1 A for each lock
Power Supply:
110 V to 120 V or 220 V to 240 V
50 Hz or 60 Hz
Network Interface (K2200IP):
RJ45 (10Base-T) EtherNet
Ordering Information
Legacy
Part #
ADI Part #
K2200-LF Door Controller (Four-door)
No keypad or faceplate. Monitors four doors and
eight Readykey or Readykey KeyPAC readers.
Operates as a stand-alone, local, remote master,
or slave unit.
K2200-LF
7S-K2200LF
K2200IP-LF Door Controller (Four-door)
No keypad or faceplate. Monitors four doors and
eight K2000/K3000 Readers.
K2200IP-LF
7S-K2200IP
K1200-LF Door Controller (Two-door)
No keypad or faceplate. Monitors two doors and
four K2000/K3000 readers. Controls up to four
AEMs, such as the K2015B. Operates as a standalone, local, remote master, or slave unit.
K1200-KF
7S-K1200KF
K1200IP-LF Door Controller (Two-door)
No keypad or faceplate. Monitors two doors and
four K2000/K3000 readers.
K1200IP-LF
7S-K1200IP
Description
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
11
K2200 DOOR CONTROLLER SERIES (CONT’D)
Ordering Information
Description
Ordering Information
Legacy
Part #
ADI Part #
FIRMWARE AND UPGRADES
K2105 K2000AM/K2000N UPGRADE
Upgrades K2000AM and K2000N Door Controllers
into K2100 Door Controllers for Stanley PAC
compatibility.
K2299 K2100/K2200 FIRMWARE UPGRADE
12
Visit us at...
www.stanleypac.com
ADI Part #
REPLACEMENT POWER SUPPLIES AND ACCESSORIES
K2105
7S-K2105
K2205-50K CARDHOLDER UPGRADE
K2205-50K 7S-K220550K
Upgrades FROM 10,000 TO 18,000 users with PAC
for Windows and up to 50,000 for PAC Vision and
Stanley PAC systems
K2199 K1100/K2100 FIRMWARE UPGRADE
Legacy
Part #
Description
K2199
K2299
Contact
Tech
Support
Contact
Tech
Support
940 4-AMP Power Supply
Compatible with K1100/K2100
Door Controllers
K2107
7S-K2107
930 8-AMP Power Supply
Compatible with K2100/K2200
Door Controllers
K2207
7S-K2207
UDS-10 to 2200 Cable
Compatible with 2100/2200
Door Controllers. Connects to a
Lantronix UDS-10, UDS-100
and UDS-1100. 6.5ft long (2m)
UDS-10CABLE
7S-UDSCABLE
READYKEY
™
COMPATIBLE
TM
DOOR CONTROLLER ACCESSORIES
D8103 Enclosure
K2108 Faceplate
New Faceplate
Old Faceplate
Ordering Information
D8103 Enclosure
Steel enclosure measuring 41cm x 41cm x 9cm
(16in. x 16in. x 3.5in.).
Ordering Information
D8103
Available
from Bosch
Security
K2108 K2000-Series Credentials Faceplate
Compatible with K2000 Series Readers and
associated credentials.
K2108
7S-K2108
K3108 Faceplate
New Faceplate
Old Faceplate
Ordering Information
K3108 K3000-Series Credentials Faceplate
Compatible with K3000 Series Readers and
associated credentials.
K3108
7S-K3108
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
13
K2015B ALARM EVENT MANAGER
Tamper Protection: Two options for tamper detection are provided:
1. A spring switch that opens when the cover is removed
2. A pair of terminals that may be taken to an external, normally
closed (NC) tamper switch.
Diagnostic Display: A diagnostic function is built-in to the K2015B
AEM. Press a button to view a two-digit display and determine the
status of each input, the tamper switch, and each relay.
Auxiliary Power Supply: The 12 V auxiliary power supply is
designed to attach equipment requiring no more than 50 mA within
32.8 ft (10 m) cable distance from the AEM. For more power or
distance use a separate power supply.
Installation/Configuration Notes
The K2015B Alarm Event Manager (AEM) controls and monitors other
equipment and systems on site.
The K2015B AEM is an optional device that connects a 2200/1200 door
controller and a reader. It can monitor up to eight inputs and provide eight
relay outputs. The type of door controller and the type of administration
system used determines the response to the inputs and the control of the
relay outputs.
Specific events activate the relay outputs on the K2015B to control a
variety of equipment. For example, you can activate a security camera,
turn lights on or off, or disarm an intrusion panel. You can also use these
relays for elevator control.
The inputs can also monitor equipment with a normally-open (NO) or
normally-closed (NC) contact point. For example, you can monitor
emergency exit doors, glass breaks, flood detection, and perimeter gates.
Features
Selectable two- or four-state inputs
Eight LED relay indicators
Auxiliary 12 V nominal power supply port
Eight supervised inputs, normally-open (NO) or normally-closed (NC)
Eight latched relay outputs
Steel case with tamper protection
Diagnostic display
Functions
Supervised Input: All eight inputs are fully supervised and jumperselectable for two- or four-state inputs. For the two-state setting no
resistors are required and only the states normal and active can be
detected.
For the four-state setting end-of-line resistors (EOL) are required and
normal, active, short (trouble), and open (tamper) states can be
detected.
Latched Relay Outputs: Each relay has a common (C), normallyclosed (NC) and normally-open (NO) contact. The relay activation time,
delay, or time limit depends on the type of door controller and the type
of administration system used. Note: Relays five to eight are only
available to systems administered by software.
14
Visit us at...
www.stanleypac.com
Place the K2015B AEM at any point between the door controller and
reader or other equipment. The cable distance between the door controller
and K2015B AEM must be less than 1500 ft (450 m).
Technical Specifications
Connections
6 conductor, multi-stranded, unshielded cable
Enclosure Dimensions:
5.8 in. x 7.2 in x 1.55 in. (14.8 x 18.4 x 4 cm)
Enclosure Material:
1.2 mm (18 AWG) epoxy-coated mild steel
Relative Humidity:
0% to 90%, non-condensing
Temperature (Operating):
-10°C to +55°C (+14°F to +131°F)
Inputs
8 Inputs
Two-state supervised - normal or active;
Four-state supervised - normal, active,
open, short
Relay Contacts:
8 latching relay contacts with common,
normally-open (NO) and normally-closed (NC)
terminals rated at 2 A at 30 VDC
Auxiliary Power Supply:
12 V nominal at 50 mA
Current (Maximum):
50 mA
Voltage (Input):
10.2 VDC to 18 VDC provided by the door
controller
Relay 1, 2, 7 and 8
(double pole double throw)
2 A at 30 VDC and 1.8 A at 35 VAC
resistive load
Relay 3, 4, 5 and 6
(single pole double throw)
4 A at 30 VDC and 3.6 A at 35 VAC
resistive load
Ordering Information
K2015B Alarm Event Manager
Connects a 2000-series door controller with a
reader, and allows the system to perform building
management tasks. Monitors up to eight inputs
and provides eight relay outputs
K2015B
7S-K2015B
READYKEY
™
COMPATIBLE
TM
K2012 WIEGAND INTERFACE
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm) standard
six-wire alarm cable, unshielded
Relative Humidity:
0% to 90%, non-condensing
For UL Listed applications, 0% to 85%,
non-condensing
Temperature (Operating):
-31°F to +140°F (-35°C to +60°C)
For UL listed applications, +32°F to
+120°F (0°C to +49°C)
Power Requirements for Readykey Reader Connector
The K2012 Wiegand Interface connects between another technology
reader (with a Wiegand output) and the K2200 and K1200 Series Door
Controllers, the K6300-PC, or the K6100-PC Desktop Administration Kit.
The K2012 converts a 26-bit Wiegand reader’s data into a format
compatible with a reader’s signal output. Include the K2012 into
applications with more than one Wiegand device on the same line or into
applications using K2100 and K1100 Door Controller Series devices with
Wiegand devices.
Current (Maximum):
80 mA
Voltage (Operating):
10.2 VDC to 18 VDC at the reader
Features
Certifications and Approvals
Dual-color diagnostic LEDs
Tamper switch
Functions
Dual-color Diagnostic LED
When turned on, the LED flashes rapidly five times immediately
followed by five additional half-second pulses before the LED settles
into its normal operation flash pattern. During normal operation, the
LED pulses green once every second. When a card is presented and is
correctly read, the LED flash frequency increases for a period of one to
two seconds. This indicates that the code has been read and sent, but
not that access will be granted.If a tamper condition is sensed, the
LED will pulse red once every second until the tamper condition is
corrected.
Tamper Switch
When you open the K2012 cover, a spring tamper switch on the board
indicates a tamper condition through the dual-color diagnostic LED. In
a tamper condition state, the K2012 does not allow the reader to
function.
Power Requirements for Wiegand Reader Connector
Current (Maximum):
50 mA, current limited by door
controller
Voltage (Operating):
5 VDC at the reader
UL
ALVY: Access Control Systems Units (UL294), APOU: Proprietary
Alarm Units (UL1076), UEHX7: Signaling Appliances,
Miscellaneous Certified for Canada (cUL)
Ordering Information
K2012 Wiegand Interface
K2012
Includes a metal case. Transfers data between the
door controllers and the Wiegand reader. Required
when using two Wiegand 26-bit format readers on
a single channel, a K2015A Alarm Event Manager
(AEM), or a K2015B AEM.
7S-K2012
Installation/Configuration Notes
The wire length from the door controller to the K2012 is up to 3000 ft
(914m) when using 18 AWG (1.2 mm) cable.
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
15
CREDENTIALS - CARDS
K2011B Printable ID Card
K2011M Magstripe Card
Each randomly coded card is ISO 7810 compliant, with a nominal thickness
of .030". The white blank graphics quality surface is optimized for Photo ID
printing on both sides and includes a paper punch template guide.
Ordering Information
Ordering Information
K2011B Printable ID Card (10 Pack)
K2011B
7S-K2011B
D8239 (K2011WG) Printable ID Card
Ordering Information
K2011WG-10
D8239-10
7S-D8239
Ordering Information
Visit us at...
www.stanleypac.com
7S- K2011M
Each randomly coded card is ISO 7810 compliant, with a nominal thickness
of .030". The white blank graphics quality surface is optimized for Photo ID
printing on both sides and includes a paper punch template guide.
K3011-10 Printable Photo ID Card
(10 Pack)
K3011
7S- K3011
D8339 (K3011WG) Photo ID Card
Each randomly coded card is ISO 7810 compliant, with a nominal thickness
of .030". An uncoded magnetic stripe is on one side and a white blank
graphics quality surface optimized for Photo ID printing on the other and
includes a paper punch template guide.
16
K2011M-10
Ordering Information
K3011M Printable ID Magstripe Card
K3011M Printable ID Card
(10 Pack)
K2011M Magstripe Card (10 Pack)
K3011 Printable Photo ID Card
Each randomly coded card is ISO 7810 compliant, with a nominal thickness of
.030". The white blank graphics quality surface is optimized for Photo ID
printing on both sides and includes a paper punch template guide and with an
attached adhesive Wiegand hex code label with its number.
D8239 Wiegand Proximity Card (26-bit)
(10 Pack)
Each randomly coded card is ISO 7810 compliant, with a nominal thickness of
.030". An uncoded magnetic stripe is on one side and a white blank graphics
quality surface optimized for Photo ID printing on the other and includes a paper
punch template guide.
Each randomly coded card is ISO 7810 compliant, with a nominal thickness of
.030". The white blank graphics quality surface is optimized for Photo ID
printing on both sides and includes a paper punch template guide and with an
attached adhesive Wiegand hex code label with its number.
Ordering Information
K3011M-10 7S-K3011M
D8339 Wiegand Proximity Card (26-bit) K3011WG-10
(10 Pack)
D8339-10
7S- D8339
READYKEY
™
COMPATIBLE
TM
CREDENTIALS - KEY FOBS AND TAGS
K2010 Proximity Key Fob
D8238 (K2010WG) Wiegand Proximity Key Fob
Old Style D8238
Old Style K2010
Built to withstand harsh operating environments or handling. Each random
and unique coded, black, plastic fob easily attaches to a key ring, badge
clip or lanyard.
Ordering Information
K2010 Proximity Keyfob (10 Pack)
Ordering Information
K2010-10
7S-K2010
K3010 Key Fob
D8238 Wiegand Proximity Token (10 Pack)
D8238-10
7S-D8238
K2010WG-10
D8338 (K3010WG) Wiegand Key Fob
Built to withstand harsh operating environments or handling. Each random
and unique coded, black, plastic fob easily attaches to a key ring, badge
clip or lanyard.
Built to withstand harsh operating environments or handling. Each random
and unique coded, black, plastic fob easily attaches to a key ring, badge
clip or lanyard. An attached adhesive label has the Wiegand hex code
number. (The fob also known as the K2010WG-10).
Ordering Information
Ordering Information
K3010 Keyfob (10 Pack)
Built to withstand harsh operating environments or handling. Each random
and unique coded, black, plastic fob easily attaches to a key ring, badge
clip or lanyard. An attached adhesive label has the Wiegand hex code
number. (The fob also known as the K2010WG-10).
K3010-10
7S-K3010
D8338 Wiegand Proximity Token (10 Pack)
D8338-10
7S-D8338
K3010WG-10
K3012 Proximity Adhesive Tag
Simply attach the adhesive-backed Tag to any nonmetallic card or device,
and you instantly have a proximity card! Randomly-coded, white, plastic,
adhesive tag that attaches to non-metallic surfaces.
Ordering Information
K3012 Wiegand Proximity Adhesive Tag
(100 Pack)
K3012-100
7S-K3012
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
17
K2001 LOW PROFILE READER
Technical Specifications
Minimum 22 AWG (0.8 mm)
four-conductor cable
Connections
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature
(Operating):-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The K2001 is low-profile and made of durable plastic and serves one
access point.
Features
Low-profile design
LED indicator
Suitable for interior or exterior installations
Reads K2000-Series credentials
Current (Maximum):
90 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 2in. (5cm)
Reader Dimensions
3.9 in. x 3.5in.x0.5in.(9.9 cm x 8.9cmx1.3cm)
Dimensions
3.5 in .
(88.9 m m )
0 .5 in .
(1 2.7 m m )
2.4 in .
(6 1 m m )
Certifications and Approvals
UL Standards
Approvals
Ratings
UL 294, Access Control System Units
FCC: Part 15
IP=66
3.9 in .
(99 m m )
+V
SI
CA
-V
2 .4 in .
(61 m m )
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 3000 ft (914 m) away from the door controller.
Ordering Information
K2001 Low-profile Proximity Reader
Gray enclosure
18
Visit us at...
www.stanleypac.com
K2001
7S-K2001
READYKEY
™
COMPATIBLE
TM
VANDAL RESISTANT READER (K2002)
Technical Specifications
Minimum 22 AWG (0.8 mm)
four-conductor cable
Connections
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature
(Operating):-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits green light
Power Requirements
The K2002 Series of proximity reader is vandal-resistant and made from
durable, 14 gauge (1.9 mm), stainless steel. When you install a K2002
Reader you can surface mount it with tamper-resistant screws. Each
reader serves one access point.
Features
Current (Maximum):
90 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 0.5 in. (1.2 cm)
Reader Dimensions
4 in. x 4 in. x 0.5 in. (10.1 cm x 10.1 cm x 1.2 cm)
Dimensions
LED access indicator
Tamper indication
Suitable for interior or exterior installations
Reads K2000-Series credentials
4 in.
(10.2 cm )
0.4 in .
(10.2 m m )
2 .7 5 in .
(70 m m )
1.7 in .
(4.3 cm )
4 in .
(1 0.2 cm )
Certifications and Approvals
UL Standards
Approvals
Ratings
UL 294, Access Control System Units
FCC: Part 15
IP=66
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 3000 ft (914 m) away from the door controller.
2.75 in .
(70 m m )
0 .75 in .
(1 9 m m )
0 .25 in .
(6 .4 m m )
0.75 in .
(19 m m )
Ordering Information
K2002 Vandal-resistant Proximity Reader
K2002
7S-K2002
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
19
K2001-P READER WITH PIN KEYPAD
Technical Specifications
Keypad:
10-digit standard membrane with visual target
area that senses valid credentials.
Connections
1.2 mm (18 AWG) four-wire, six-strand
Environmental Considerations
Relative Humidity
Temperature (Operating)
Indicators
0% to 90%, non-condensing For UL Listed
applications, 0% to 85%, non-condensing
-45°C to +50°C (-49°F to +122°F) For UL 294
applications, -35°C to +60°C (-31°F to+140°F)
One LED that emits red or green light
Power Requirements
Current (Maximum):
120 mA
The K2001-P Proximity Reader with PIN Keypad is vandal-resistant,
weather-resistant, and made of heavy-gauge steel. The K2001-P Proximity
Reader with PIN Keypad requires a valid credential (card, token, or tag)
and a unique personal identification number (PIN) from each user. You
must enter the PIN with the reader’s standard membrane keypad. You can
also program the reader to require only a valid credential during certain
times of the day.
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
12 to 18 VDC, supplied by door controller
Back Box Dimensions
13.5 cm x 7.1 cm x 3.8cm (5.3 in. x 2.8 in. x
1.5in.)
Reader Dimensions
14.5 cm x 10cm(5.7 in. x 4in.)
Features
Ordering Information
Vandal-resistant
High security access control
Flexible programming for PIN requirement
Invalid PIN response
LED indicator
Suitable for interior or exterior installations
Soft, standard, membrane keypad
Reads K2000-Series credentials
Certifications and Approvals
UL Standards
UL 294, Access Control System Units
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 3000 ft (914 m) away from the door controller.
20
Visit us at...
www.stanleypac.com
K2001-P Proximity Reader with PIN Keypad
K2001-P
7S-K2001P
READYKEY
™
COMPATIBLE
TM
K2001-SP SURFACE MOUNTED PIN READER
Technical Specifications
Keypad:
10-digit standard membrane with visual target
area for credential presentation.
Compatible Controllers
Readykey K1100, K2100, and K2200
Connections
Four- or six-way (four required for reader)
multi-stranded, unscreened standard signal or
alarm cable
Environmental Considerations
Relative Humidity
Temperature (Operating)
Indicators
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
-49°F to +122°F (-45°C to +50°C)For UL 294
applications, (-31°F to +140°F) -35°C to +60°C
One LED that emits red or green light
Power Requirements
The K2001-SP Surface Mounted Proximity Reader with PIN Keypad is
appropriate for interior applications and surface mounting. The K2001-SP
Reader requires a valid credential (card, token, or tag) and a unique
personal identification number (PIN) from each user. You must enter the
PIN with the reader’s standard membrane keypad. You can also program
the reader to require only a valid credential during certain times of the
day.
Features
High security access control
Flexible programming for PIN requirement
Invalid PIN response
Duress code
Easy mounting to flat surfaces
Soft, standard, membrane keypad
Reads K2000-Series credentials
Current (Maximum):
120 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
12 to 18 VDC, supplied by door controller
Range
Up. to 0.6 in. (Up to 1.5 cm))
Reader Dimensions
14.5 cm x 10cm (5.7 in. x 4in.)
Ordering Information
K2001-SP Proximity Reader with PIN Keypad
K2001-SP
7S-K2001SP
Certifications and Approvals
UL Standards
UL 294, Access Control System Units
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 18 AWG (1.2 mm) wire, you can place the reader up to
1500ft (457 m) away from the door controller.
PIN Considerations
Each PIN is derived from the credential and cannot be changed.
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
21
K2003 MULLION READER
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature
(Operating):-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The K2003 is weather-resistant, low-profile, and made of durable plastic.
Install the readers on door frames or on mullions.
Current (Maximum):
35 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 2in. (5cm)
Reader Dimensions
5.1 in. x 1.56 in. x 0.6 in. (13 cm x 4 cm x 1.5 cm)
Features
Suitable for door frame and mullion installations
Internal sounder
LED indicator
Suitable for interior or exterior installations
Reads K2000-Series credentials
Certifications and Approvals
UL Standards
Approvals
UL 294, Access Control System Units
FCC: Part 15
Connection Considerations
Use a six-wire cable for applications with a door contact and a
request-to-exit device.
Use an eight-wire cable for applications with a sounder.
If you use 18 AWG (1.2 mm) wire, you can place the reader up to 3000
ft (914 m) away from the door controller.
22
Visit us at...
www.stanleypac.com
Ordering Information
K2003 Mullion Proximity Reader
Gray enclosure
K2003
7S-K2003
READYKEY
™
COMPATIBLE
TM
D8201 LOW PROFILE READER
Technical Specifications
Minimum 22 AWG (0.8 mm)
four-conductor cable
Connections
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature
(Operating):-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The D8201 Low profile Readers is constructed from a durable plastic.
They have an approximate read range of 2 in. (5 cm) and serve one
access point. The LED lights green to indicate valid access; otherwise, it
is red.
Current (Maximum):
90 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 2in. (5cm)
Reader Dimensions
3.9 in. x 3.5in.x0.5in.(9.9 cm x 8.9cmx1.3cm)
Features
Low-profile design
LED indicator
Suitable for interior or exterior installations
Reads D-Series credentials
Certifications and Approvals
UL Standards
Approvals
Ratings
Dimensions
0 .5 in .
(1 2.7 m m )
3.5 in .
(88.9 m m )
2.4 in .
(6 1 m m )
3.9 in .
(99 m m )
+V
SI
CA
-V
2 .4 in .
(61 m m )
ALVY: Access Control Systems Units
(UL294), APOU: Proprietary Alarm Units
(UL1076)
FCC: Part 15
IP-66
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 22 AWG (.8 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller.
Ordering Information
D8201 Low-profile Proximity Reader
Gray enclosure
D8201
7S-D8201
Compatibility Information
Credentials
D8238 Wiegand Proximity Token
D8239 Wiegand Proximity Card
Systems
Readykey/Stanley PAC
D9412G Control Panel
D7412G Control Panel
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
23
D8203 MULLION READER
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature
(Operating):-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The D8203 Mullion Reader is weatherproof and made of durable plastic.
Install the reader on door frames or mullions. This reader has independently
controlled piezo sounders and LEDs that light green to indicate valid access.
Keys and cards are read at a distance of up to 2 in. (5 cm).
Features
Certifications and Approvals
Approvals
Ratings
ALVY: Access Control Systems Units
(UL294), APOU: Proprietary Alarm Units (UL1076)
FCC: Part 15
IP-66
Connection Considerations
Use a six-wire cable for applications that have a door contact and a
Request-to-exit device
If you use 22 AWG (.8 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller.
Compatibility Information
Credentials
D8238 Wiegand Proximity Token
D8239 Wiegand Proximity Card
Systems
Readykey/Stanley PAC
D9412G Control Panel
D7412G Control Panel
24
35 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 2in. (5cm)
Reader Dimensions
5.1 in. x 1.56 in. x 0.6 in. (13 cm x 4 cm x 1.5 cm)
Ordering Information
Suitable for door frame and mullion installations
Internal sounder
LED indicator
Suitable for interior or exterior installations
Reads D-Series credentials
UL Standards
Current (Maximum):
Visit us at...
www.stanleypac.com
D8203 Mullion Proximity Reader
Gray enclosure
D8203
7S-D8203
READYKEY
™
COMPATIBLE
TM
READER COMBINER
K2040A Reader Combiner
Ordering Information
K2040A Reader Combiner
Allows up to two proximity readers on the same
door channel on K1100/2100 Door Controllers
K2040A
7S-K2040A
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
25
K3001 (D8301) LOW-PROFILE READER
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature
(Operating):-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The K3001 (D8301) is low-profile and made of durable plastic thats serves
one access point.
Features
Low-profile design
Five programmable output formats (Readykey keyPAC (default),
Wiegand 26-bit, Wiegand 34-bit, magnetic stripe, or barcode)
LED indicator
Suitable for interior or exterior installations
K3001-Series reads K3000-Series credentials
D8301 requires D8338 or D8339 credentials
Certifications and Approvals
UL Standards
Approvals
Ratings
UL 294, Access Control System Units
CE, FCC: Part 15
IP 66
Connection Considerations
Use a six-wire cable for applications with a door contact and a
request-to-exit device.
K3001 - If you use 18 AWG (1.2 mm) wire, you can place the reader up
to 3000 ft (914 m) away from the door controller.
D8301 - If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller or control panel
Compatibility information
Systems
26
KeyPAC K2100/K2200 and PAC512-Series Door Controllers
Bosch D9412G Control Panel
Bosch D7412G Control Panel
Visit us at...
www.stanleypac.com
Current (Maximum):
85 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 2in. (5cm)
Reader Dimensions
3.9 in. x 3.5in.x0.5in. (9.9 cm x 8.9cmx1.3cm)
Ordering Information
K3001 Low-profile Proximity Reader
Gray enclosure
K3001
7S-K3001
READYKEY
™
COMPATIBLE
TM
K3002/D8302 VANDAL RESISTANT READER
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature (Operating):
-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The K3002 (D8302) Series of proximity reader is vandal-resistant and
made from durable, 14 gauge (1.9 mm), stainless steel. When you install a
K3002 Reader, you can surface mount it with tamper resistant screws.
Each reader serves one access point.
Current (Maximum):
85 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 0.5 in. (1.2 cm)
Reader Dimensions
4 in. x 4 in. x 0.5 in. (10.1 cm x 10.1 cm x 1.2 cm)
Features
Vandal-resistant material
Five programmable output formats (Readykey keyPAC (default),
Wiegand 26-bit, Wiegand 34-bit, magnetic stripe, or barcode)
LED indicator
Suitable for interior or exterior installations
K3002-Series reads K3000-Series credentials
D8302 requires D8338 or D8339 credentials
Ordering Information
K3002/D8302 Vandal-resistant Proximity Reader
Stainless steel
K3002
D8302
7S-K3002
Certifications and Approvals
UL Standards
Approvals
Ratings
UL 294, Access Control System Units
CE, FCC: Part 15
IP 66
Connection Considerations
Use a six-wire cable for applications with a door contact and a
request-to-exit device.
K3002 - If you use 18 AWG (1.2 mm) wire, you can place the reader up
to 3000 ft (914 m) away from the door controller.
D8302 - If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller or control panel
Compatibility information
Systems
KeyPAC K2100/K2200 and PAC512-Series Door Controllers
Bosch D9412G Control Panel
Bosch D7412G Control Panel
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
27
K3003/D8303 MULLION READER
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90%, non-condensing For UL Listed applications, 0% to 85%, non-condensing
Temperature (Operating)
-35°C to +60°C (-31°F to +140°F)
Indicators
One LED that emits red or green light
Power Requirements
The K3003/D8303 dark gray reader is weather-resistant, low-profile, and
made of durable plastic. Install the readers on door frames or on mullions.
Features
Suitable for door frame and mullion installations
Five programmable output formats (Readykey keyPAC (default),
Wiegand 26-bit, Wiegand 34-bit, magnetic stripe, or barcode)
Internal sounder
LED indicator
Suitable for interior or exterior installations
K3002-Series reads K3000-Series credentials
D8302 requires D8338 or D8339 credentials
Certifications and Approvals
UL Standards
Approvals
Ratings
UL 294, Access Control System Units
CE, FCC: Part 15
IP 66
Connection Considerations
Use a six-wire cable for applications with a door contact and a
request-to-exit device.
Use an eight-wire cable for applications that have a sounder
K3003 - If you use 18 AWG (1.2 mm) wire, you can place the reader up
to 3000 ft (914 m) away from the door controller.
D8303 - If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller or control panel
Compatibility information
Systems
28
KeyPAC K2100/K2200 and PAC512-Series Door Controllers
Bosch D9412G Control Panel
Bosch D7412G Control Panel
Visit us at...
www.stanleypac.com
Current (Maximum):
40 mA
Voltage (Input):
12 VDC nominal supplied by the door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 2in.
Reader Dimensions
5.1in. x 1.56in. x 0.6in.
Ordering Information
K3003 Mullion Proximity Reader
Gray enclosure
K3003
7S-K3003
READYKEY
™
COMPATIBLE
TM
K3004 EXTENDED-RANGE READER
Technical Specifications
Connections
Minimum 22 AWG (0.8 mm)
four-conductor cable
Environmental Considerations
Relative Humidity
0% to 90% at 86°F±5°F (+30°C±2°C) for 24 hours
For UL Listed applications, 0% to 85%,
non-condensing
Temperature (Operating):
-31°F to +140°F (-35°C to +60°C)
Indicators
One LED that emits red or green light
Power Requirements
The K3004 (D8304) is weather-resistant and made of durable plastic. The
reader has an extended range of up to 10 in. (25.4 cm)
Current (Maximum):
85 mA
Voltage (Input):
12 VDC to 18 VDC supplied by door controller
Voltage (Operating):
10 VDC to 18 VDC at the reader
Read Range
Up to 10 in.
Reader Dimensions
5.5 in. x 3.15 in. x 0.87 in.
Features
Extended range
Five programmable output formats (Readykey keyPAC (default),
Wiegand 26-bit, Wiegand 34-bit, magnetic stripe, or barcode)
Internal sounder
Two LED indicators
Suitable for interior or exterior installations
K3004-Series reads K3000-Series credentials
D8304 requires D8338 or D8339 credentials
Ordering Information
K3004 Extended-range Proximity Reader
Gray enclosure.
K3004
7S-K3004
Certifications and Approvals
UL Standards
Approvals
Ratings
UL 294, Access Control System Units
CE, FCC: Part 15
IP 66
Connection Considerations
Use a six-wire cable for applications with a door contact and a
request-to-exit device.
Use an eight-wire cable for applications that have a sounder
The reader’s lead length is approximately 36 in. (91.5 cm)
K3004 - If you use 18 AWG (1.2 mm) wire, you can place the reader up
to 3000 ft (914 m) away from the door controller.
D8304 - If you use 18 AWG (1.2 mm) wire, you can place the reader
up to 500 ft (152 m) away from the door controller or control panel
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
29
DESKTOP ADMINISTRATION KITS
The Oneprox USB Enrollment Reader is powered
and connects over USB. It reads traditional
K2000-series and K3000-series ID credentials and
is ideally suited for systems that have been
upgraded to Stanley PAC.
Features
Black wedge enrollment reader
Dual frequency (OneProx) reader reads K2000-series and
K3000-series credentials
No power supply required
Not compatible with PAC for Windows
Ordering Information
The K6130DT-PC Desktop Administration Kit allows compatible
workstations to read traditional K2000-series and K3000-series ID
credentials. It also provides direct communications between a PC and a
door controller. Install the supplied line driver in the door controller, and
connect a cable (not supplied) between the line driver and the PC
interface unit.
With the K6130DT-PC Desktop Interface Kit, you can easily add ID
devices to the database, or use an ID device to search for existing
personnel in the database by presenting it to a desktop reader. The
K6130DT-PC reads K2000-Series credentials or K3000-Series
credentials, including ISO thickness ID cards.
Features
Black wedge enrollment reader
Dual frequency (Oneprox) reader reads K2000 and K3000 Series
credentials
Direct communication between PC and door controller
Power supply included
The K6100AD-PC Desktop Administration Kit
provides direct communications between a PC
and a door controller. Install the supplied line
driver in the door controller, and connect a
cable (not supplied) between the line driver
and the PC interface unit. When combined
with a K2012 (Not Supplied) Wiegand Interface and a 26-bit reader (Not
Supplied), 26-bit credentials can be enrolled into the system.
Features
Direct communication between PC and door controller
Power supply included
30
Visit us at...
www.stanleypac.com
K6130 DT PC Desktop Admin Kit
K6130DT-PC 7S-K6130DT
Includes:
1x PC interface unit
1x Black desktop reader with cable
1x Nine-pin cable to connect the PC to the PC
interface unit
1x Power source with cable to connect to the
PC interface unit
1x Power cable to connect the power supply to
the wall
1x Line driver for connecting to a door
controller
2x Cable ties for securing the cables to the PC
interface unit
K6100-AD PC Desktop Admin Kit
Includes:
1x PC interface unit
1x Nine-pin cable to connect the PC to the PC
interface unit
1x Power source with cable to connect to the
PC interface unit
1x Power cable to connect the power supply to
the wall
1x Line driver for connecting to a door
controller
2x Cable ties for securing the cables to the PC
interface unit
Oneprox USB Enrollment Reader
Includes:
1x Black desktop reader with cable
K6100-AD
7S-K6100AD
ARD-USBNRL 7S-USBRDR
READYKEY
™
COMPATIBLE
TM
K6100/6300-CNCII SERIES
Technical Specifications
Controller
Dimensions for K6100-CNCII and
K6300-CNCII
2 in. x 15 in. x 13.8 in.
(6 cm x 38 cm x 35 cm)
Dimensions for Power Supply:
5 in. x 10.6 in. x 13.6 in.
(12.5 cm x 27 cm x 34.5 cm)
Fuses
The K6100-CNCII and K6300-CNCII Central Network Controller (CNC)
are flat, steel-cased units that mount between a PC system unit and
the PC monitor. They administer K2200 (K2100) and K1200 (K1100)
Door Controllers from a central PC running PAC for Windows, PAC
Vision or Stanley PAC administration software.
It has a 16-character alphanumeric display for system messages and
a key reader for key administration and alarm acceptance.
Six nine-way D-type connectors are used for power, six-wire bus,
host PC, and three RS-232 serial ports, and one eight-way DIN
connector for connecting an external PAC, Magstripe, and/or
Wiegand reader. It comes with an external power supply.
Use the CNCII to add more controllers or communication ports to an
existing system.
Features
Dial-up and dial-back communications
Communications protection
Front panel display
K6100-CNCII has a built-in K2000-Series enrollment reader
K6300-CNCII has a built-in K3000-Series enrollment reader
Battery (External):
1 20-mm glass, anti-surge rated at 3 A
Battery (Internal):
1 20-mm glass, anti-surge rated at 3 A
Mains I/P
1 type HBC, anti-surge rated at 250mA
Power Requirements
Battery Output:
13.8 VDC; up to 370 mA
Current (Nominal):
600 mA at 12 VDC
Voltage (Input):
110 VAC
Ordering Information
K6100-CNCII Multi-site Central Network
Controller
With built-in K2000-Series Enrollment Reader
K6100CNCII
7S-6100CNC
K6300-CNCII Multi-site Central Network
Controller
With built-in K3000-Series Enrollment Reader
K6300CNCII
7S-K6300CNC
Toll Free Customer Service: 1-800-414-3038
Customer Service FAX: 1-800-414-3039
31
WHEN YOU DEVELOP OUTSTANDING PRODUCTS.
IT ONLY SEEMS RIGHT TO OFFER SERVICE TO MATCH...
Our industry leading warranty demonstrates our commitment
to product reliability and our customers’ success.
R
A
E
Y
5
Our card readers and credentials all carry a lifetime
warranty, all other hardware is covered by a five year
warranty
For more information, visit Stanley PAC on the Web at www.stanleypac.com or contact your
Authorized Partner representative, or call 1-800-414-3038 from anywhere in North America.
Stanley, PAC, Stanley PAC, One-Touch are registered trademarks of Stanley Security Solutions, Inc.
Readykey is a registered trademark of Bosch Security Inc. in the USA.
All other trademarks are the property of their owners.
© Copyright 2010, Stanley Security Solutions, Inc. All Rights Reserved. Information in this document
is subject to change without notice. Stanley assumes no responsibility for any errors that may
appear in this document.
AM_IPACSG_32010
32