Samsung SDN-550 User`s manual

24/7 Sharp Eye
High Resolution Day & Night Camera SDN-550 User’s Manual
SALES NETWORK
•
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8139 FAX : +82-31-740-8145
•
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
www.samsungtechwin.com
www.samsungcctv.com
•
TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
P/No. : Z6806-0736-01A
VAN 06. 06
ENGLISH
Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.
■ SDN-550 SERIES
• NTSC MODELS
SDN-550N
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco
mark represents Samsung Techwin s will to create environment-friendly
products, and indicates that the product satisfies the EU RoHS Directive.
• PAL MODELS
SDN-550P
SDN-550PH
■ MODEL DESCRIPTION
• SDN-550X
_ _X
POWER SOURCE
SIGNAL SYSTEM
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
• SIGNAL SYSTEM
N --> NTSC MODEL
P --> PAL MODEL
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
• POWER SOURCE
--> DC12V/AC24V
H --> AC 230V~
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
INFORMATION -This equipment has been tested and found to comply with limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer could
void the user’s authority to operate the equipment.
WARNING - To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform to all local codes.
Contents
6
Features
7
Warnings and precautions
24
25
11
• WHITE BALANCE control
26
11
12
13
14
• BACKLIGHT (Backlight Compensation)
27
• AGC(Auto Gain Control)
28
• SSNR (Samsung Super Noise Reduction)
29
• SENS-UP
30
• SPECIAL
31
• EXIT
32
Overview
■ Front
■ Back
Installation
■ Lens
15
Connection
15
■ Connecting to a monitor
18
19
20
15
■ Connecting to power
■ Connection to External Control Connector
COLOR CCD CAMERA
4
User’s Manual
21
22
■ Settings
• SHUTTER (condition and speed control)
10
■ Bottom
21
• LENS (selection)
Components and Accessories
■ Side
Operating Your Camera
■ Menu
Troubleshooting
38
Specifications
40
COLOR CCD CAMERA
5
User’s Manual
Features
Warning
Horizontal Resolution 530 TV Lines
Featuring 530TV line horizontal resolution
in color mode and 570TV line horizontal
resolution in BW mode.The camera features
Sony’s 410,000 pixel CCD and capture clean,
noiseless high-quality image.
DAY & NIGHT
This camera has a function that automatically
selects the mode that is appropriate for
daytime or night-time conditions.
The COLOR mode operates in daytime
conditions to provide optimum colors, and
BW mode operates in night-time conditions
to enhance the definition of the image.
The camera needs periodic maintenance.
High Sensitivity
Contact an authorized technician for maintenance.
The built-in high sensitivity COLOR CCD
enables a clear image even in 0.002Lux(Sensup) or lower illumination.
Stop using your camera when you find a malfunction.
SSNR (Samsung Super Noise
Reduction)
If you use your camera around smoke or unusual heat for a long time,
fire may be caused.
By using built-in SSNR function manufactured by
SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly reduced,
and the signal-to-noise ratio (S/N) as well as
horizontal resolution have been improved, resulting
in a clear and sharp image display even in the dark.
Do not Install the camera on a surface that can not support it.
SPOTLIGHT Function
Unless the surface is suitable, it could cause falling or other hazards.
Do not handle the camera with wet hands.
The SPOTLIGHT function is setting when you
want subject in the center of the image exposed
correctly, regardless of the back lighting.
It could cause an electric shock.
Controlled by OSD Menu
Do not disassemble the camera.
Electronic IRIS
The electronic IRIS function enables continuous
automatic control of the shutter between
1/60(1/50)~1/120,000 seconds.
The camera can be controlled by selecting text
displayed on the monitor screen.
Motion Detection
PRIVACY Function
The PRIVACY function conceals the areas
you do not wish to appear on the screen.
Once motion is detected, the camera sends an
alert signal to the processing unit, which, if
used in conjunction with an optional alarm, can
provide effective surveillance of your property.
VIDEO/DC Drive Lens
Additonal Function
The video drive lens and the DC drive lens
can be selected by the touch of a switch.
SENS-UP, DZOOM, MIRROR, SHARPNESS
and SYNC(INT/LL) functions are also available.
COLOR CCD CAMERA
6
User’s Manual
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in fire or other hazards.
COLOR CCD CAMERA
7
User’s Manual
Precautions
Do not install under extreme
temperature conditions.
Do not install in high humidity
environment.
Use only under temperature conditions
between -10˚C and +50˚C. Provide good
ventilation when using in high temperature
conditions.
Do not install under unstable
lighting conditions.
May lower image quality.
Do not drop the camera or
subject it to physical shock.
May cause a product malfunction.
Never keep the camera face to
strong light directly.
May damage the CCD.
Do not expose the camera to
rain or other types of liquids.
Do not expose the camera to
radioactivity.
Avoid touching the camera lens.
Wipe dry any liquids. Liquids may contain
minerals that are corrosive to electronic
components.
Radioactivity exposure may damage the
CCD.
Notes
Severe lighting changes or flickering may
hinder normal camera operation.
COLOR CCD CAMERA
8
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
User’s Manual
• Exposure to a spotlight or an object emitting strong light may cause smear or
blooming.
• Ensure that the power source complies with normal specifications before supplying
it to the camera.
COLOR CCD CAMERA
9
User’s Manual
Overview
Components and Accessories
FRONT
1. HIGH RESOLUTION DAY & NIGHT
COLOR CAMERA
2. Auto iris lens connection plug
3. C-Mount adaptor
CCD protection cap
Please cover the CCD SENSOR when not using it.
C-Mount lens adaptor
Please attach the C-Mount lens here.
CS-Mount lens adaptor
Please remove the C-MOUNT lens adaptor and then attach it.
4. Instruction manual
COLOR CCD CAMERA
Back Focus adjustment lever
Please used to adjust back focal length
10 User’s Manual
COLOR CCD CAMERA
11 User’s Manual
Overview
BOTTOM
SIDE
DAY
& NIGHT
Mounting bracket screw hole
Please use the screw hole when fixing the
camera onto the mounting bracket. Please
use the clamp screw as specified below.
Auto iris lens connector
This is the connection terminal for the auto iris lens.
*The mounting bracket can be separated
and attached to the top of the camera.
In this instance please do not
tighten the screw to a depth of
more than 4mm, otherwise
serious damage can occur to the
inside of the camera.
L
1/4"-20 UNC (20 THREAD)
L:4.5mm±0.2mm
standard),
(ISO
Note
• This camera package does not include the mounting bracket. Please refer to the
user's manual for installation of the mounting bracket.
COLOR CCD CAMERA
12 User’s Manual
COLOR CCD CAMERA
13 User’s Manual
Overview
Installation
Lens
BACK
Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and
C-Mount lens can be used.
Note
• Please keep the lens clean.
• Any foreign objects and fingermarks on the lens can cause inferior image quality
in low light level conditions.
When using an auto iris lens
*High Voltage Type
(SDN-550PH)
Auto iris lens selection switch
Please change the mode to DC or VIDEO depending on the type of auto iris lens
being used.
Power lamp
Lights up when the correct power is supplied to the camera.
Setting button
• SETUP button : Used for the menu display. This button can be used to confirm
settings after changing the value of the selected function or
current conditions.
• UP & DOWN buttons : Used for selecting items by moving the cursor up or
down on the menu screen.
• LEFT & RIGHT buttons : Used when changing item values, by moving the
cursor to the left or right on the menu screen.
External Control Connector
Relates to the MOTION DETECTION output signal and the DAY/NIGHT input signal.
Video output terminal
Sends video signal and connects to the video input terminal of the monitor.
Power input terminal
Connects to the power appropriate to each model.
COLOR CCD CAMERA
14 User’s Manual
1. Please peel off about 8mm of the outer skin of the auto iris lens cable.
approx. 8mm
2. Please peel off about 2mm of the outer skin of the insulated conductor inside
the lens cable.
approx. 2mm
COLOR CCD CAMERA
15 User’s Manual
Installation
3. Please remove the cover of the auto iris lens connection plug and solder the
lens cable to the connector pin in the plug.
Pin No.
DC
DampingDamping+
Drive+
Drive-
No.1 Pin
No.2 Pin
No.3 Pin
No.4 Pin
LENS
VEDIO
Red (power)
NC
White (video signal)
Black (GND)
Lens cable
No.3 Pin
No.1 Pin
Connector
When using a C-Mount lens
Please take off the CCD protection cap and attach the
C-Mount lens to the camera by screwing
it in clockwise.
C-mount adaptor
When using a CS-Mount lens
1. Please take off the CCD protection cap and
C-mount adaptor.
C-mount adaptor
No.4 Pin
No.2 Pin
CCD protection cap
4. Please replace the auto iris lens connection plug cover and take off the CCD
protection cap, and then attach the auto iris lens to the camera by screwing
it in clockwise.
5. Please insert the connection plug that is
connected to the auto iris lens cable into
the auto lens connector, which is located
on the side of the camera.
6. Please set the lens selection switch, located on the
side of the camera, to DC or VIDEO depending on the
type of auto iris lens which is being used.
COLOR CCD CAMERA
16 User’s Manual
2. Please attach the CS-Mount lens to
the camera by screwing it in
C-mount adaptor
clockwise.
Note
• Please use the specified lens connection parts as shown in the picture below.
The use of the wrong sized parts of the wrong size may cause
damage to the inside of the camera or result in poor fitting.
• Use of a lens which is too heavy affects the balance of the
camera and may cause a malfunction. Please use a lens
that weighs less than 450g.
• Please select Av mode if possible when adjusting the
automatic light control (ALC) of an auto lens. Use of PK
mode may cause hunting.
COLOR CCD CAMERA
17 User’s Manual
C-mount lens : 10 mm or less
CS-mount lens : 5 mm or less
Connection
Connecting to Monitor
Connecting to Power
Please connect the video output terminal located on the back of the camera to
the monitor.
Each model has a different power input specification.
Please check the model type and standard power requirement before
connecting to power.
AC/DC Power Type
The recommended adaptor specification
for SDN-550N/SDN-550P is AC
24V/500mA or DC 12V/500mA.
CCD Camera
Monitor
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75Ω/Hi-Z switch for the intermediate video TV set
and select 75Ω for the Intermediate device as shown in the picture below.
High Voltage Type (AC230V, 50Hz)
Use AC230V, 50Hz power source
For SDN-550PH.
CCD Camera
Intermediate
End monitor
An adaptor that meets the standard requirement must be used.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG)
#24(0.22mm2)
#22(0.33mm2)
#20(0.52mm2)
#18(0.83mm2)
Resistance value(Ω/m)
0.078
0.050
0.030
0.018
Voltage drop(V/m)
0.028
0.018
0.011
0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to
the camera may affect the performance of the camera.
Standard voltage for camera operation : DC 12V±10%
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
COLOR CCD CAMERA
18 User’s Manual
COLOR CCD CAMERA
19 User’s Manual
Connection
Operating Your Camera
Connection to External Control Connector
Menu
SETUP menu
MD(Motion Detection) output signal level(less than 10mA)
+3V
There is motion
0V
There is no motion
LENS (selection)
• MANUAL
• DC / VIDEO
SHUTTER
(condition and speed control)
• ESC
• MANUAL
• FLK
WHITE BALANCE control
• ATW
• AWC
• MANUAL
BACKLIGHT
(Backlight compensation)
• OFF
• HIGH
• LOW
• SPOTLIGHT
• MIDDLE
AGC (Auto Gain control)
• OFF
• NORMAL
• HIGH
SSNR
(Samsung super noise reduction)
• OFF
• HIGH
• LOW
• MIDDLE
SENS-UP (Low illuminance)
• OFF
• AUTO
SPECIAL
• CAMERA ID
3sec
• DZOOM
• MOTION DET
• MIRROR
• RESET
DAY&NIGHT input control signal
If you want to use EXT mode, consist proper system that satisfy below
condition.
• For DAY mode, D&N terminal should be open from GND terminal.
• For B/W mode, D&N terminal should be short to GND terminal.
COLOR CCD CAMERA
20 User’s Manual
EXIT
COLOR CCD CAMERA
21 User’s Manual
• DAYNIGHT
• SYNC
• PRIVACY
• SHARPNESS
• RETURN
Operating Your Camera
Settings
Settings can be made using the 5 buttons located on the back of the camera.
Select any function you
wish to operate by
using the UP and
DOWN buttons.
SETUP button
UP button
RIGHT button
LEFT button
DOWN button
1. Please press the SETUP button.
• Settings can now be made. The SETUP menu is displayed on the monitor.
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
5.AGC
6.SSNR
7.SENS-UP
8.SPECIAL
9.EXIT
DC
--ATW
OFF
NORMAL
LOW
OFF
Modes can be
changed using the
LEFT and RIGHT
buttons.
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes
are displayed in order. Please keep pressing the button until you get to the
mode you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Note
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
5.AGC
6.SSNR
7.SENS-UP
8.SPECIAL
9.EXIT
DC
--ATW
OFF
NORMAL
LOW
OFF
• If appears at the mode you wish to operate, it means that there is a sub-menu
which can be selected by pressing the SETUP button.
appears at the mode item, it means that there is no mode available to be
• If
selected.
2. Please select any function you wish to activate by using the UP and DOWN
buttons.
• The arrow can be moved up or down by using the UP and DOWN buttons.
Please position the arrow to point to the function you wish to operate.
COLOR CCD CAMERA
22 User’s Manual
COLOR CCD CAMERA
23 User’s Manual
Operating Your Camera
LENS (selection)
SHUTTER (condition and speed control)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow
to point to 'LENS' by using the UP and DOWN buttons.
2. Please select the type of the lens you wish to use by pressing the LEFT or
RIGHT button.
SETUP
1.LENS
2.SHUTTER
DC
---
DC/VIDEO : Auto iris lens selection
Auto or manual control can be selected.
1. When the SETUP menu is on the screen, please position the arrow to
point to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK
: Please select 'FLK' mode when flickering occurs on the screen,
due to an imbalance between illumination and frequency.
NTSC Model:1/100, PAL MODEL: 1/120
ESC
: Auto control of the shutter speed can be achieved. When ESC
mode is on, the speed is controlled automatically according to the
brightness of the screen.
MANUAL : The shutter speed can be controlled manually.
Note
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
• When using an auto iris lens, the setting of the auto iris lens selection switch,
located on the back of the camera, must be on DC or VIDEO depending on the
type of the lens which is being used. (Please refer to the picture on page 15)
• The brightness of the screen can be adjusted in DC mode. The brightness can
be adjusted within the range of 1~70. The optimum level of brightness for the
user can be achieved by adjustment.
DC
--ATW
OFF
3. Please select 'MANUAL' mode if you wish to adjust the shutter manually.
• You can select speed from ‘1/60’ to ‘1/120,000’sec (NTSC Models), ‘1/50’
to ‘1/120,000’sec (PAL Models).
4. Please press the SETUP button when all the settings are complete.
Note
MANUAL : Manual lens selection
3. Please press the SETUP button if you wish to return to the previous menu.
COLOR CCD CAMERA
24 User’s Manual
• When selecting DC/VIDEO lens, the shutter speed is fixed at 1/60 (1/50).
• While using the internal synchronous system, if the shutter setting is on
'ESC' and the camera is directly facing a bright fluorescent light, the image on
the screen can be adversely affected. Therefore please choose the installation
location with care.
• When 'MANUAL' mode is on, the SENS UP function does not operate.
COLOR CCD CAMERA
25 User’s Manual
Operating Your Camera
BACKLIGHT (Backlight Compensation)
WHITE BALANCE control
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
When there is a strong backlight behind the object, clear images of the background
as well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SETUP
1.LENS
DC
SHUTTER
--3.WHITE BAL.
ATW
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
Please select one of the 3 modes below.
ATW(Auto Tracking White Balance) : This mode can be used within the color
temperature range 1,800˚K ~ 10,500˚K (Ex. fluorescent light, outdoor, sodium
vapor lamp or inside tunnels)
AWC(Auto White Balance Control) : Please press the SETUP button while the
camera is directed at a piece of white paper to obtain the optimum state under
current illumination. If the environment including the light source is changed, you
have to adjust the white balance again.
MANUAL: The manual adjustment mode enables finer adjustment. Please select
ATW or AWC first. Please change to manual adjustment mode and press the SETUP
button. Please set the appropriate color temperature, and then increase or decrease
the red and blue color values while monitoring the color changes on the object.
Note
• Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
1. When the object’s surroundings have a very high color temperature.
(Ex. a clear sky and sunset)
2. When the object’s surroundings are dark
3. If the camera directly faces a fluorescent light or is installed in a place where
there are considerable changes in illumination, the WHITE BALANCE function
may become unstable.
COLOR CCD CAMERA
26 User’s Manual
DC
--ATW
OFF
SPOTLIGHT :
When the SPOT LIGHT is illuminated under the
restricted area such as entrance of the APT parking
lot or gas station, it exposes the number plate of the
automobile accurately and the efficient watch does
to be possible.
• Day Mode: The BLC function accomplishes by
SPOTLIGHT window which was set in
standard.
INCIDENT SPOTLIGHT
• B/W Mode: If both sides of the SPOTLIGHT window
be thrown bright light, monitor screen
showed up the SPOTLIGHT window.It
is possible to a subject in the center of
the image exposed correctly.
Note
SPOTLIGHT WINDOW
• Under ordinary circumstances, "SPOTLIGHT"
may not be operated unstably.
COLOR CCD CAMERA
27 User’s Manual
< SPOTLIGHT ON >
Operating Your Camera
HIGH/MIDDLE/LOW : You can adjust the sensitivity of Backlight Compensation.
OFF BACKLIGHT function does not operate.
3. Please press the SETUP button. The
BRIGHTNESS can be adjusted within the range
of 1~70.
4. Please press the SETUP button when all the
settings are complete.
SSNR (Samsung Super Noise reduction)
BACKLIGHT ON
BACKLIGHT OFF
AGC (Auto Gain Control)
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button. As the level of gain increases, the screen gets brighter and the level
of noise also increases.
The background noise in the low light level decreases automatically as the level
of gain changes.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
5.AGC
6.SSNR
HIGH
: The gain increases or decreases within the range of 6dB ~ 34dB.
NORMAL : The gain increases or decreases within the range of 6dB ~ 30dB.
OFF
: The gain is fixed at 6dB.
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
5.AGC
6.SSNR
7.SENS-UP
8.SPECIAL
9.EXIT
COLOR CCD CAMERA
DC
--ATW
OFF
NORMAL
LOW
OFF
28 User’s Manual
DC
--ATW
OFF
NORMAL
LOW
OFF
: There is no reduction in noise level.
LOW
: There is a small reduction in noise level with almost no ghost image.
MIDDLE : The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
HIGH : The level of noise is reduced greatly, however there is an increase
in ghost imaging.
Note
• When AGC is turned off, SSNR does not operate.
COLOR CCD CAMERA
29 User’s Manual
Operating Your Camera
SENS UP (Low illuminance)
SPECIAL
SENS UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
1. Please position the arrow to point to 'SENS UP' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using
the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the UP or DOWN button.
SPECIAL
10.CAMERA ID
OFF
11.DAYNIGHT
AUTO
12.DZOOM
OFF
13.SYNC
INT
14.MOTION DET
OFF
15.PRIVACY
OFF
16.MIRROR
OFF
17.SHARPNESS
ON
18.RESET
19.RETURN
AUTO : Low light level auto mode
OFF : The function does not operate.
Note
• When SHUTTER is in the manual mode, SENS UP does not operate.
• When AGC is turned off, SENS UP does not operate.
SETUP
1.LENS
2.SHUTTER
3.WHITE BAL.
4.BACKLIGHT
5.AGC
6.SSNR
7.SENS-UP
DC
--ATW
OFF
NORMAL
LOW
OFF
3. Please press the SETUP button when all the settings are complete.
Note
CAMERA ID : If the ID is input, the camera ID appears on the monitor.
1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN
button.
2) Please select 'ON' by pressing the LEFT or RIGHT button.
Note
• If 'OFF' is selected, the ID does not appear on
the monitor even if it has been input.
• The maximum storage magnification in low light level can be adjusted by pressing
the SETUP button in 'AUTO' mode.(X2~X128)
• As the magnification increases, the screen gets brighter; moving object gets more
afterimage.
• If storage magnification is increased while SENS UP is operating, it may cause
noise, and spots may appear; however this is normal.
COLOR CCD CAMERA
30 User’s Manual
COLOR CCD CAMERA
SPECIAL
10.CAMERA ID
11.DAYNIGHT
12.DZOOM
13.SYNC
14.MOTION DET
15.PRIVACY
16.MIRROR
17.SHARPNESS
18.RESET
19.RETURN
31 User’s Manual
OFF
AUTO
OFF
INT
OFF
OFF
OFF
ON
Operating Your Camera
3) Please press the SETUP button.
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
4) Up to 15 letters can be used for the ID.
Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
The name will appear at the top left hand corner.
FRONT DOOR
to Locate, then SET
Select an ID from A,B~Y,Z, a,b~y,z, 0,1~8,9 by using the UP, DOWN, LEFT
and RIGHT buttons.
Please lock in the letters by using the SETUP button.
• When the letter is locked in, the cursor moves to the next space.
Please repeat the above to input the ID.
Please find the position you wish to display the name by using the 4
directional buttons, and then press the SETUP button.
FRONT DOOR
Note
to Locate, then SET
• If the wrong name has been input.....
If you press the SETUP button after moving the cursor to CLR, all the letters
will be erased. If you want to correct a letter, please move the cursor to the
arrow at the bottom left of the screen and press 'SET'.
Please position the cursor above the letter you wish to correct, and then move
the cursor onto the letter you wish to choose and press the SETUP button.
COLOR CCD CAMERA
32 User’s Manual
6) Please select 'END' and then press the SETUP button to complete ID input.
COLOR CCD CAMERA
33 User’s Manual
Operating Your Camera
DAY&NIGHT (ICR TYPE) : Select from COLOR, BW, AUTO or EXT modes.
•AUTO: According to the input luminance level, IR Cut Filter is automatically
switched to the appropriate mode for
daytime or night-time. The COLOR mode is
operated for daytime, and it converts to BW
mode for night-time
•COLOR : COLOR mode
•B/W : BW mode. Please press SETUP button to turn
on or off the burst signal on BW mode.
•EXT: It enables user to control DAYNIGHT mode by external input signal. (refer
to p20)
Note
• If AGC is OFF, you can't select AUTO mode.
When selecting the BW mode, ‘AGC’ function is fixed to HIGH mode.
When DayNight mode is set to Auto under the condition which the strong IR light
is flickering periodically, a malfunction of IR-Cut filter may occur.
DZOOM : Configure Zoom magnification rate from
X2~X10 using this feature.
• Please press the SETUP button.
• Please select the ZOOM RATE from X2~X10.
- INT : Internal synchronization - LL : External line-lock synchronization
• If you choose ‘LL’, you can adjust the desired phase. Press the SET button.
• You can adjust the desired phase from 0 to 359.
Note
• When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models).
• When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models).
• ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
MOTION DETECTION : Your camera transmits an alert signal when it detects
motion of an object on the screen. If you connect the
camera to an external alarm. you can pay attention to
the screen when the alarm sound. This feature is useful
when you have to monitor several screens simultaneously.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
• Please select the area you wish to observe from the
3 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be observed by
using the UP, DOWN, LEFT or RIGHT button.
• Please press the SETUP button to save the changes and complete the setting.
Note
SYNC : Two SYNCHRONIZATION modes are
available INTERNAL and EXTERNAL LINELOCK. In LINE-LOCK mode, it synchronizes
the video signal between cameras without a
synchronous generator. The line-lock
synchronization is only used in the areas of
60Hz (NTSC Models) / 50Hz (PAL Models).
COLOR CCD CAMERA
34 User’s Manual
• Connect an external alarm device to MD Out on back of the
camera. (refer to P20 )
COLOR CCD CAMERA
35 User’s Manual
Operating Your Camera
PRIVACY : Mask privacy area you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode. - ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• Please select the area you do not wish to appear
from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be concealed
by using the UP, DOWN, LEFT or RIGHT button.
RESET : Returns to the level which was set by the manufacturer for shipment.
RETURN : Returns to the SETUP menu.
EXIT
Saves all the setting menus and then exits.
MIRROR
- ON : Sets a horizontal image inversion.
- OFF : Cancels the inversion.
MIRROR ON
MIRROR OFF
SHARPNESS : The outline of the video image becomes cleaner and more
distinctive as the level of SHARPNESS increases. If the level goes
up excessively, however, it may affect the video image and
generate noise.
• Please press the SETUP button.
• The available range of level is 0 ~ 31.
COLOR CCD CAMERA
36 User’s Manual
COLOR CCD CAMERA
37 User’s Manual
Troubleshooting
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
Problem
Solution
Nothing appears on
the screen.
The video image is
not clear.
The screen is dark.
There is a problem
with the camera
operation. The
camera surface is too
hot and black stripes
appear on the screen.
• Please check the power connection.
• Please check the video signal line connection.
• Please check and make sure that the auto lens
switch is set to DC (VIDEO) when using a DC
(VIDEO) lens.
• Please check the Brightness of Auto Iris lens.
• Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light.
Please move the camera if necessary.
• Please readjust the back focus of the camera.
• Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 18)
• Please check if an auto iris lens is being used
and adjust the brightness level.
• Please check if an appropriate power source to
the camera complies with the manufacturer's
standard requirement, or if the voltage keeps
changing.
COLOR CCD CAMERA
38 User’s Manual
Problem
Solution
The MOTION
DETECTION function
is not working.
• Please check if 'MOTION DETECTION' mode is
turned on.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colors are not quite
right.
• Please check the 'WHITE BAL' setting. (Please
refer to page 26)
The screen is
flickering.
• Please check if the camera is facing directly into
sunlight or fluorescent light.
• Please check if an auto iris lens is being used.
• Please check the connection of the lens
connector cable.
L/L mode isn't able to
be selected.
• Have you connected your camera to DC power
source? Connect it to AC power source.
• Please check the frequency of power supply
(60Hz for NTSC, 50Hz for PAL).
DAYNIGHT(Auto)
mode is not working.
• Please check if the AGC menu is set to the OFF
position.
SENS-UP function is
not working.
• Please check if the AGC menu is set to the OFF
position.
• Please check if the SHUTTER menu is set to
MANUAL mode.
• Please check the limit of Sens-UP AUTO mode.
COLOR CCD CAMERA
39 User’s Manual
DECLARATION OF CONFORMITY
Specifications
P
O
W
E
R
C
C
D
S
y
n
c.
Input Voltage
Power Consumption
Sensor
Total Pixels
Effective Pixels
Scanning System
Synchronization
Frequency
Video Output
Resolution
S/N (Y signal)
Min. Illumination
Backlight Compensation
E
L
E
C
T
R
I
C
A
L
Day & Night
Gain Control
White Balance
Electronic shutter speed
Sens-Up
O.S.D
Motion Detection
SSNR
Mirror
Privacy
Sharpness
IRIS Control
DZoom
Lens Mount
Application of Council Directive(s)
89 /336 /EEC
SDN-550N
SDN-550P
SDN-550PH
Manufacturer's Name
SAMSUNG TECHWIN CO., LTD
AC24V±10%
or DC12V±10%
AC24V±10%
or DC12V±10%
AC230V±10%
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
3.5W
4.0W
1/3 inch, Sony Super HAD CCD
811(H) x 508(V)
795(H) x 596(V)
768(H) x 494(V)
752(H) x 582(V)
2:1 Interlace
Internal/Line Lock
Internal/Line Lock
H : 15.734KHz / V : 59.94 Hz
H : 15.625KHz / V : 50.00 Hz
1.0Vp-p/75Ω
1.0Vp-p/75Ω
(Video 0.714Vp-p Sync 0.286Vp-p)
(Video 0.7 Vp-p Sync 0.3 Vp-p)
530 Lines(Color) / 570 Lines(BW)
50 dB
0.3Lux@F1.2, 0.002Lux@F1.2(Sens-up), COLOR/ 0.01Lux@F1.2(B/W)
LOW/MIDDLE/HIGH/SPOTLIGHT/OFF Selectable
Color, B/W, AUTO (Filter Auto Change), EXT
(External Day & Night Mode Control Capability via Terminal on the Back Panel)
NORMAL/HIGH/OFF Selectable
ATW (1,800K~10,500K)/AWC/MANUAL
AUTO : (1/60 ~ 1/120,000sec)
AUTO : (1/50 ~ 1/120,000sec)
MANUAL : (X128 ~ X2,1/60 ~ 1/120K) MANUAL : (X128 ~ X2,1/50 ~ 1/120K)
AUTO/OFF(selectable limit X2˚~X128)
Built-in
ON/OFF (3 Programmable Zone)
LOW/MIDDLE/HIGH/OFF Selectable
ON/OFF (Horizontal Image Inversion)
ON/OFF (4 Programmable Zone)
ON/OFF (Level Adjustable)
Control DC / Video IRIS Lens
X2 ~X10
CS Mount ( Easy Focus Type)
C Mount is mountable by using adaptor
Operating
Temperature/Humidity
Dimension
Weight
-10˚C to +50˚C / 30% to 80% RH
350g
COLOR CCD CAMERA
60(W) x 52(H) x 130(D)mm
350g
40 User’s Manual
510(with power cable)
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-120
European Representative Name
European Representative Address
Equipment Type/Environment
CCTV Camera
Model Name
SDN-550P
SDN-550PH
Beginning Serial NO.
S6060001
Year of Manufacture
2006. 6. 1
Conformance to
EN 50081-1:1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4:1996
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
Manufacturer
SAMSUNG TECHWIN CO., LTD
Legal Representative in Europe
YOUNG TAEK SON
Full Name
Position
QUALITY CONTROL MANAGER
Position
Place
CHANGWON, KOREA
Place
Date
2006. 6. 1
Date
Signature
Full Name
Signature