IRONY M Benutzerhandbuch / manual / manuale / manuel Fig. 1

Add to my manuals
21 Pages

advertisement

IRONY M  Benutzerhandbuch / manual / manuale / manuel Fig. 1 | Manualzz
Benutzerhandbuch / manual / manuale / manuel
IRONY M
Fig. 1
Fig. 1
deutsch
AUF – ZU
Sekundärluftschieber
Primärluftschieber
english
open – closed
secondary air supply
primary air supply
italiano
aperto – chiuso
Regolazione aria secondaria
Regolazione aria primaria
english
contents
italiano
indice
1. Techn. data
5
2. Important information
5
3. Correct operation
of your stove
6
4. The most important
spare parts - overview 7
5. Assembly / Dismantling 8
Guarantee
17
1. Dati tecnici
2. Informazioni importanti
3. Per un uso corretto della
vostra Kaminofen
4. Prospetto dei ricambi
principali
5. Assemblaggio
Garanzia
français
ouvert - fermé
Coulisseau d’entrée d’air second.
Coulisseau d’entrée d’air primaire
Fig. 2
deutsch
Inhalt
1. Techn. Daten
2. Wichtige Informationen
3. So bedienen Sie Ihren
Kaminofen richtig
4. Die wichtigsten
Ersatzteile - Übersicht
5. Montage- / Demontage
Garantie
1
1
2
3
4
17
français
sommaire
9
9
10
11
12
18
1. Caractéristiques
2. Infos importantes
3. Bien utiliser votre
poêle
4. Principales pièces
détachées
5. Montage / démontage
Garantie
13
13
14
15
16
18
Irony M
1
deutsch
1. TECHNISCHE DATEN
Als Kaminofen der Bauart 1 ist ein Anschluß an
einen bereits mit anderen Öfen und Herden für
feste und flüssige Brennstoffe belegten
Schornstein möglich, sofern die
Schornsteinbemessung gemäß DIN 4705, Teil 3,
dem nicht widerspricht.
TECHNISCHE DATEN
Höhe
Breite
Tiefe
Gewicht
Gewicht mit Keramikmantel
Rauchrohrabgang Durchmesser
Nennwärmeleistung lt. DIN 18891
1430 mm
800 mm
690 mm
265 kg
306 kg
180 mm
8 kW
Maximale Heizleistung
Kleinste Heizleistung
Raumheizvermögen (abhängig
von der Hausisolierung)
11 kW
4 kW
90 – 180 m³
Abgaswerte für die Mehrfachbelegung des Schornsteines nach DIN 4705, Teil 3 bzw. zur Bemessung
des Schornsteines nach DIN 4705, Teil 2
Abgasmassenstrom
geschlossen 8 g/s
Abgastemperatur
geschlossen 300 °C
Mindestförderdruck bei geschlossen 0,11 mbar
Nennwärmeleistung (Nwl)
bei 0,8facher 0,09 mbar
Nwl
2. WICHTIGE INFORMATIONEN
Allgemeine Sicherheitshinweise
zum Betrieb Ihres Kaminofens
•
Lesen Sie vor der Inbetriebnahme des Ofens
das gesamte Handbuch gründlich durch und
beachten Sie die Warnhinweise.
•
Für den Transport Ihres Heizgerätes dürfen
nur zugelassene Transporthilfen mit ausreichender
Tragfähigkeit verwendet werden.
•
Ihr Heizgerät ist nicht zur Verwendung als
Leiter oder Standgerüst geeignet.
•
Durch den Abbrand von Brennmaterial wird
Wärmeenergie frei, die zu einer starken Erhitzung
der Oberfläche des Heizgerätes, der Türen, der
Tür- und Bediengriffe, der Türgläser, der
Rauchrohre und gegebenenfalls der Frontwand
des Heizgerätes führt. Die Berührung dieser Teile
ohne entsprechende Schutzbekleidung oder
Hilfsmittel wie z.B. Hitzeschutzhandschuhe oder
Betätigungsmittel (kalte Hand), ist zu unterlassen.
•
Machen Sie Ihre Kinder auf diese besondere
Gefahr aufmerksam und halten Sie sie während
des Heizbetriebes vom Heizgerät fern.
•
Verbrennen Sie ausschließlich das im Kapitel
„saubere Verbrennung“ angeführte genehmigte
Heizmaterial.
•
Das Verbrennen oder Einbringen von leicht
brennbaren oder explosiven Stoffen, wie leere
Spraydosen und dgl. in den Brennraum, sowie
deren Lagerung in unmittelbarer Nähe Ihres
Heizgerätes, ist wegen Explosionsgefahr
strengstens verboten.
•
Beim Nachheizen sollen keine weiten, oder
leicht brennbaren Kleidungsstücke getragen
werden.
•
Das Abstellen von nicht hitzebeständigen
Gegenständen auf dem Heizgerät oder in dessen
Nähe ist verboten.
•
Legen Sie keine Wäschestücke zum
Trocknen auf den Ofen.
•
Ständer zum Trocknen von Kleidungsstücken
oder dgl. müssen in ausreichendem Abstand vom
Heizgerät aufgestellt werden - Brandgefahr.
•
Beim Betrieb Ihres Heizgerätes ist das
Verarbeiten von leicht brennbaren und explosiven
Stoffen im selben oder in anschließenden Räumen
verboten.
Kaminofenaufstellung
Sicherheitsabstände(Mindestabstände)
Fig. 2
1. Zu nicht brennbaren Gegenständen:
a > 400 mm b > 200 mm
2. Zu brennbaren Gegenständen und zu tragenden
Wänden aus Stahlbeton:
a > 800 mm b > 200 mm
(a - nach vorne im Strahlungsbereich)
(b - seitlich und hinten)
Erfolgt die Aufstellung auf einem brennbaren bzw.
temperaturempfindlichen Boden, so muß er auf eine nicht
brennbare Unterlage gestellt werden, z.B. auf eine Metallplatte, die den Ofen vorne um 50 cm und seitlich um 30 cm
überragt. Vor dem Ofen darf sich im Strahlungsbereich der
Sichtscheibe unterhalb von 80 cm kein brennbares bzw.
temperaturempfindliches Material befinden.
Bitte beachten Sie, daß der Aufstellungsraum
mind. eine Türe / ein Fenster ins Freie aufweisen
oder mit einem derartigen Raum direkt verbunden
sein muß.
Technische und optische Änderungen, Satz- und Druckfehler vorbehalten.
Die Informationen in diesem Handbuch sind
allgemeiner Natur. Vorschriften können von Land
zu Land unterschiedlich sein; regionale
Vorschriften können Vorrang haben.
deutsch
2
Irony M
Bodentragfähigkeit
Rauchrohranschluß
Prüfen Sie vor dem Aufstellen ob die Tragfähigkeit
der Unterkonstruktion dem Gewicht Ihres
Kaminofen standhält.
Für den Anschluß der Rauchrohre an den
Schornstein gibt es zu Ihrer eigenen Sicherheit
strenge Richtlinien. Ihr Kaminofen-Fachhändler
kennt diese. Beauftragen Sie daher unbedingt
Ihren Fachhändler mit dem Rauchrohranschluß.
3. SO BEDIENEN SIE IHREN KAMINOFEN RICHTIG
Die erste Inbetriebnahme Ihres
Kaminofens
Ihr Kaminofen wurde mit einem
umweltverträglichen Speziallack lackiert. Die
Lackoberfläche ist bei Auslieferung Ihres Ofen
noch weich. Die Aushärtung des Lacks erfolgt bei
der ersten Inbetriebnahme. Die Lackoberfläche
darf während dieses Vorganges nicht berührt
werden. Der Kaminofen muß mindestens
1,5 Stunden stark aufgeheizt werden. Bei der
Aushärtung des Lackes können sichtbare Dämpfe
freiwerden. Öffnen Sie daher vor der ersten
Inbetriebnahme die Fenster. Dadurch können die
Dämpfe schnell abziehen.
BITTE BERÜCKSICHTIGEN SIE: Erst nach
mehreren Heizvorgängen ist der Betrieb Ihres
Kaminofen nur mehr vom heimeligen Geruch des
verbrennenden Holzes geprägt.
Zugelassene Brennstoffe
Trockenes, gut abgelagertes, naturbelassenes
Holz, Holzbriketts, Braunkohlebriketts.
Maximale Brennstoffmenge
Brennholz. Fig. 3 gibt Ihnen eine Richtlinie
hinsichtlich der Menge an Heizmaterial.
Fig. 3: Heizmaterial
Öffnen Sie die Primär- und Sekundärluftzufuhr
maximal. Bewegen Sie dazu beide Schieber siehe
Fig. 2 „AUF“.
Öffnen Sie die Kaminofentür.
Legen Sie unbeschichtetes Papier auf den
Feuerraumboden.
Legen Sie darauf eine handvoll Weichholzspäne.
Legen Sie auf diese Späne 1 – 2 Scheite Holz.
Maximal aufzugebende Brennstoffmenge: 2,5 kg
Holz oder 2,3 kg Holzbriketts.
Größere Brennstoffmengen können zu
Überhitzung und Beschädigungen am Ofen führen!
Saubere Verbrennung
Richtig Feuer machen
Bereiten Sie alles zum Anheizen vor –
Weichholzspäne, Anzündhilfe (wie zB Thermohit
Holz-Kohleanzünder), unbeschichtetes Papier,
Fig. 4: Anzünden
Zünden Sie nun das Papier an.
Schließen Sie die Feuerraumtür.
Sobald die Weichholzspäne gut brennen,
schließen Sie den Primärluftschieber.
Symbolabbildungen
Das Brennholz muß trocken (rel. Holzfeuchte <
15 %) und unbehandelt sein und die richtige
Brennholzmenge muß verbrannt werden, um eine
saubere, emissionsarme Verbrennung zu
erreichen.
Irony M
3
deutsch
Sobald die Holzscheite gut brennen, können Sie
mit dem Sekundärluftschieber die Heizleistung
regulieren (Schieber auf Maximalstellung „AUF“ =
maximale Heizleistung – siehe Fig. 2).
Beim Nachlegen gehen Sie prinzipiell wie beim
Anheizen vor: Primärluftschieber öffnen,
Sekundärluftschieber öffnen, Kamintüre vorsichtig
öffnen, Holz nachlegen, Kaminofentüre schließen.
Warten Sie, bis das nachgelegte Holz brennt.
Dann schließen Sie den Primärluftschieber. Regeln
Sie in der Folge die Heizleistung mit dem
Sekundärluftschieber.
Fig. 5: Primärluftschieber schließen
4. DIE WICHTIGSTEN ERSATZTEILE - ÜBERSICHT
Dichtungen
Bezeichnung
Dichtung flach 8 x 2 mm
Dichtung flach 8 x 2 mm
Dichtung rund d =16 mm
Nr.-Skizze
23
23
21
Artikelnr.
710096
710096
715042
Nr.-Skizze
4/8
5/7
6
11
1
2
10
9
3
Artikelnr.
715013
715022
715014
715025
715023
715024
715177
715178
715090
Nr.-Skizze
22
-----
Artikelnr.
715132
640138
640067
640070
640085
Keramott
Bezeichnung
Keramott seitlich links/rechts
Keramott Eckstein links/rechts
Keramott Rückwand
Keramott Holzfänger
Keramott Boden links
Keramott Boden rechts
KE1 Zugplatte 1
KE1 Zugplatte 2
KE1/KE2 Rost
Numerierung Keramott = Einbauanleitung!
Sonstiges
Bezeichnung
Irony M Türglas
Ofenlack anthrazit metallic matt
Holz-Kohleanzünder
Glasreiniger 0,5l
Edelstahlreiniger
Zubehör
Bei Ihrem Fachhändler erhalten Sie Bodenplatten aus Glas oder Stahl, Kaminbestecke, Pflegemittel oder
das Heat Memory System zur Wärmespeicherung.
WICHTIG: Lassen Sie defekte Teile ausschließlich von Ihrem Kaminofenfachhändler austauschen.
Damit ist gewährleistet, daß Ihr Kaminofen sicher und funktionstüchtig ist und bleibt.
Pflege
Zur Glasreinigung verwenden Sie bitte ein Spezialprodukt wie Thermohit Glasreiniger. Lackierte
Oberflächen dürfen nur mit einem Tuch (ev. feucht) gereinigt werden. Für Edelstahloberflächen gibt es
ebenfalls Spezialreiniger.
deutsch
4
5. MONTAGE- / DEMONTAGEANLEITUNG
Verkleidung
Zum einfacheren Transport können folgende
Verkleidungsteile abgenommen werden:
1. Heben Sie das vordere Konvektionsblech
(Pos. 1) ab.
2. Entfernen sie die beiden Blechschrauben (Pos.
6).
3. Entfernen sie jetzt den vorderen Gußdeckel
(Pos. 2)
4. Nehmen Sie die Deckel-Keramik (Pos. 4 und
5) ab.
5. Hängen sie jetzt den kompletten linken und
rechten Mantel (Pos. 7 und 8) durch Anheben
aus.
6. Um eine Beschädigung der Aschenfangplatte
(Pos. 3) zu vermeiden, müssen die 2
Schrauben (Pos. 9) aus der Sockelblende
(Pos. 10) entfernt und die Keramik nach vorne
abgenommen werden.
Zusammenbau erfolgt in umgekehrter Reihenfolge
der oben angeführten Punkte.
Fig. 6: Verkleidungsteile
Irony M
Irony M
5
english
1. TECHNICAL DATA
As a stove of construction type 1, it is possible to
connect it to the flue pipe of an existing other stove
or another furnace for solid and liquid fuels, as
long as the chimney does complies with DIN 4705,
Part 3.
TECHNICAL DATA
Height
Width
Depth
Weight
Weight with ceramic shell
Flue pipe outlet diameter
Nominal thermal output (DIN 18891)
Maximum thermal capacity
1430 mm
800 mm
690 mm
265 kg
306 kg
180 mm
8 kW
11 kW
Smallest heating capacity
Room heating capacity (depending
on building insulation)
4 kW
90 – 180 m³
Exhaust values for multiple use of the chimney in
accordance with DIN 4705, Part 3 and for the
calculation of the chimney measurements in
accordance with DIN 4705, Part 2
Fluegas mass flow
closed
8 g/s
Fluegas temperature
closed
Minimum feed pressure closed
300 °C
0.11 mbar
Nominal thermal output
at 0.8 times 0.09 mbar
n. ther. outp.
2. IMPORTANT INFORMATION
The installation and operation information given
here is of a general nature, exact regulations may
vary from country to country. The rules in force in
your country should always take precedence.
heating unit is strictly forbidden due the danger of
explosion.
General Safety Instructions for
the Operation of Your Stove
•
Placing non-heat-resistant objects on the
heating unit or in the vicinity of the heating unit is
forbidden.
•
Thoroughly read the entire manual before
starting up your stove and ensure compliance with
the warnings.
•
•
Your heating unit is not suitable to be used as
a stand or as a ladder.
•
The burning of fuel releases thermal energy
that leads to a substantial heating up of the surface
of the heating unit, the doors, the parts mounted
on the door, door glass, flue pipe and in some
cases the front wall of the heating unit. Do not
touch any of these surfaces without respective
protective clothing or without the help of
accessories such as heat-resistant gloves or a cold
hand.
•
Make your children aware of this particular
danger and keep them at a distance from the
heating unit whenever it is in operation.
•
Only burn approved fuels and materials listed
in the section entitled Clean Burning.
•
The burning or introduction of flammable or
explosive materials, such as empty spray cans and
the like into the firebox as well as the storage of
such materials in the immediate vicinity of your
Do not lay laundry onto the stove for drying.
•
Laundry hung up to dry must be kept at a safe
distance from the stove because of the danger of
fire.
•
When operating your heating unit it is
forbidden to use flammable or explosive materials
in the same or an adjacent room to the one in
which your heating unit is located.
Setting Up Your Stove
Safety Clearances (Minimum Distances in
Fig. 2)
1. to nonflammable objects:
a > 400 mm b > 200 mm
3. to flammable objects and to supporting walls of
reinforced-concrete construction with convection
shell:
a > 800 mm b > 200 mm
(a – toward the front in the radiated area)
(b – to the side and to the back)
If the installation of the stove is being made on a flammable or
heat-sensitive floor, the stove must be placed on a nonflammable floor plate (e.g. a metal floor plate), which exceeds
the stove dimensions, by 50 cm to the front and by 30 cm to the
sides. You must not place any flammable or heat-sensitive
materials 80 cm towards the front of the radiated area of the
door glass.
Make sure that the room in which the stove is set
up has at least one door or window to the outside
or is directly adjacent to such a room.
Subject to technical and optical modifications. Formatting and printing errors excepted.
•
Your heating unit may not be moved without
approved means of transport with sufficient loadbearing capacity.
•
Do not wear loose or flammable clothing when
adding fuel to the fire.
english
6
Irony M
Floor Load Capacity
Stovepipe Connection
Before the heating unit is installed, make sure that
the load capacity of the supporting construction is
sufficient to carry the weight of the entire unit.
For your own safety stringent laws apply to the
connecting of the stovepipe to the chimney. Your
professional dealer or distributor knows these laws.
Please have your certified retailer carry out the
connection of your stove.
3. CORRECT OPERATION OF YOUR STOVE
Initial startup of your stove
Your stove was treated with a special
environmentally friendly lacquer. The lacquer
surface is still soft at the time the stove is shipped.
The lacquer will harden when your stove is used
for the first time. The lacquer surface may not be
touched when it is heated for the first time. The
stove must be initially heated to a high temperature
for at least 1.5 hours. Visible vapors may appear
during the hardening of the lacquer. For this
reason it will be necessary to open windows during
initial operation in order let the vapors escape into
the outdoors.
PLEASE TAKE NOTE: It takes several heating
sessions before for your stove releases only the
pleasant smell of burning wood.
Approved Fuels
Dry, well cured and natural wood, wood briquettes,
brown-coal briquettes.
Figure 3: Heating Material
Open the primary and secondary air all the way.
Move both sliders. See Figure 2.
Open the stove door.
Lay uncoated paper on the floor of the firebox.
Lay soft wood chips onto the paper.
Lay one or two logs of wood on the wood chips.
Maximum Amount of Fuel
Maximum amount of fuel to be added: 2,5 kg wood
or 2,3 kg wood briquettes. Larger amounts of fuel
can lead to overheating and thus damage the
stove.
Clean Burning
Making a Fire
Prepare everything you need for starting the fire—
soft wood chips, igniter materials (such as
Thermohit wood/coal igniter), uncoated paper,
wood. Figure 1 provides a good overview of the
materials you will need.
Figure 4: Igniting the Fire
Light the paper.
Close the firebox.
As soon as the chips are burning well, close the
primary air supply.
symbol figures
The wood must be dry (relative wood moisture
< 15%) and untreated and the right amount of
wood must be burned in order to ensure a clean
fire that releases only small amounts of emissions.
Irony M
7
english
As soon as the wood logs are burning well, you
can regulate the heating capacity with the
secondary air slider. (Slider set to the maximum
(“AUF”) setting produces maximum heat – see
Figure 2.)
When adding wood to the fire, follow the same
procedure as when igniting the fire: Open primary
air, open secondary air, carefully open firebox
door, lay wood on the fire, close the firebox door.
Wait until the added wood catches fire and is
burning. Then close the primary air. Subsequently
regulate the fire with the secondary air supply.
Figure 5: Close the Primary Air
4. THE MOST IMPORTANT SPARES—OVERVIEW
Gaskets
Description
Flat gasket 8 x 2 mm
Flat gasket 8 x 2 mm
Round gasket d=16 mm
Nr. drawing
23
23
21
Part number
710096
710096
715042
Nr. drawing
4/8
5/7
6
11
1
2
10
9
3
Part number
715013
715022
715014
715025
715023
715024
715177
715178
715090
Nr. drawing
22
-----
Part number
715132
640138
640067
640070
640085
Keramott
Description
Keramott side component left/right
Keramott corner stone left/right
Keramott side back wall
Keramott wood retainer
Keramott floor left
Keramott floor right
KE1 flue plate 1
KE1 flue plate 2
KE1/KE2 grate
Keramott numbering = installation instructions!
Other parts
Description
Irony M door glass
Stove lacquer anthrazit metallic matt
Wood/coal igniter
Glass cleaner 0,5l
Stainless steel cleaner
Accessories
You can obtain floor plates of glass or steel, fireplace utensils, care products or the Heat Memory System
for heat storage from your certified dealer.
IMPORTANT: Have defective parts replaced by your certified dealer. This will guarantee that your
stove functions properly and safely.
Maintenance
To clean the glass, please use a specialized product such as Thermohit glass cleaner. Lacquered
surfaces are to be cleaned only with a cloth (may be damp). Special cleaning agents should also be used
for stainless steel surfaces.
english
8
5. ASSEMBLY- / DISMANTLING INSTRUCTIONS
Cladding
The following cladding units can be removed for
easier transport:
1.
2.
3.
4.
5.
Remove the front convection plate (Item 1).
Remove the two plate screws (Item 6).
Now remove the front cast cover (Item 2)
Remove the cover ceramic unit (Item 4 and 5).
Remove the complete left and right shells
(Items 7 and 8) by lifting them out of position.
6. In order to avoid damaging the ash collection
tray (Item 3), the two screws (Item 9) must be
removed from the pedestal skirt (Item 10) and
the ceramic unit is lifted toward the front.
The above components are re-assembled in the
reverse order.
Fig. 6: Cladding components
Irony M
Irony M
9
italiano
1. DATI TECNICI
Questa stufa-caminetto (Kaminofen del tipo Bauart
1) è adatta per essere collegata ad una canna
fumaria già utilizzata per altre stufe o fonti di calore
che impiegano combustibili solidi o liquidi, se le
dimensioni della canna fumaria lo consentono
(norma DIN 4705, Parte 3).
DATI TECNICI
Altezza
Larghezza
Profondità
Peso
Peso con rivestimento in ceramica
Diametro uscita fumi
Rendimento nominale (secondo DIN
18891
1430 mm
800 mm
690 mm
265 kg
306 kg
180 mm
8 kW
Rendimento massimo
Rendimento minimo
Volume riscaldabile (m3) (dipende
dalle condizioni di isolamento
dell'abitazione)
11 kW
4 kW
90 – 180 m3
Valori delle emissioni per allacciamento multiplo
alla canna fumaria (secondo norma DIN 4705,
Parte 3) e per il calcolo delle dimensioni della
canna fumaria (secondo DIN 4705, Parte 2)
Flusso fumi
chiuso
8 g/s
Temperatura fumi
chiuso
300 °C
Depressione minima
chiuso
0,11 mbar
con rendimento
con r.nom. di 0,09 mbar
0,8 volte
2. INFORMAZIONI IMPORTANTI
Avvertenze generali e
precauzioni nell'impiego della
Kaminofen
•
Prima di mettere in funzione la stufa vi
raccomandiamo di leggere attentamente l'intero
manuale che vi fornisce importanti informazioni e
avvertimenti.
•
Per il trasporto della stufa utilizzate mezzi
idonei, la cui portata sia sufficiente a sostenerne il
peso.
•
Non utilizzate la stufa come se fosse una
scala o un'impalcatura per salirvi sopra.
•
In seguito alla combustione si libera energia
termica, che provoca un forte riscaldamento della
superficie della stufa e del tubo uscita fumi. Fate
attenzione quindi ed evitate di toccare componenti
come l'antina, la maniglia, le leve di regolazione
delle prese d'aria, il vetro ceramico, il tubo di uscita
fumi ed eventualmente la parte frontale della stufa
senza una protezione adeguata, ad esempio un
guanto o altri utensili (gancio smuovicenere,
”manofredda”).
•
Istruite i vostri bambini su questi inconvenienti
e teneteli lontani dalla stufa quando è accesa.
•
Utilizzate solo i combustibili indicati nel
capitolo „Combustibili adatti“.
•
Nella camera di combustione non devono
essere introdotte e bruciate sostanze facilmente
infiammabili od esplosive, come bombolette spray
vuote e simili. Non lasciate tali oggetti nelle
immediate vicinanze della stufa (pericolo di
esplosione).
•
Quando si aggiunge legna nella stufa accesa
è consigliabile non portare capi di abbigliamento
che possano prendere fuoco facilmente.
•
Non appoggiate oggetti non resistenti al
calore sulla stufa o nelle sue immediate vicinanze.
•
Non mettete ad asciugare biancheria sopra la
stufa.
•
Stendibiancheria o simili devono essere
collocati ad una distanza adeguata dalla stufa
(pericolo di incendio).
•
Quando la stufa è in funzione è sconsigliabile
lavorare con sostanze facilmente infiammabili o
esplosive nella stessa stanza o in stanze adiacenti.
Installazione della stufa
Distanze di sicurezza (distanze minime)
Fig. 2
1. Da oggetti non infiammabili:
a > 400 mm b > 200 mm
2. Da oggetti infiammabili e pareti portanti in cemento
armato:
a > 800 mm b > 200 mm
(a - anteriormente nell’area di irradiazione)
(b - lateralmente e posteriormente)
Se la stufa è installata sopra un pavimento in materiale
infiammabile, occorre posizionare un elemento ininfiammabile fra la stufa ed il pavimento, ad esempio
una base di protezione in acciaio che superi la stufa di 50
cm anteriormente e 30 cm lateralmente.
E’importante che non vi siano materiali infiammabili
posizionati a meno di 80 cm dalla base del vetro fuoco.
Salvo modifiche di carattere tecnico ed estetico o errori di fotocomposizione e stampa.
Questo manuale contiene informazioni generali. Le
normative possono cambiare da paese a paese; le
normative locali possono risultare prioritarie.
english
Il luogo in cui installate la stufa deve disporre di
almeno una porta / finestra che dia all’esterno
oppure deve essere collegato direttamente ad un
ambiente con accesso all’esterno.
10
Irony M
ialiano
11
Portata del pavimento
Prima di installare la stufa, accertatevi che la
struttura sottostante al punto in cui volete
sistemarla sia in grado di sopportarne il peso.
Irony M
Collegamento del tubo di uscita
fumi
Per garantire la vostra sicurezza, il collegamento
dei tubi di uscita fumi alla canna fumaria è regolato
da apposite norme. Per l’installazione e il
collegamento rivolgetevi quindi al vostro
rivenditore, che è a conoscenza di tali disposizioni.
3. PER UN USO CORRETTO DELLA VOSTRA
KAMINOFEN
Quando mettete in funzione la
stufa per la prima volta
La vostra Kaminofen è stata rifinita con una
speciale vernice ecocompatibile. Al momento della
fornitura le superfici laccate e verniciate non sono
ancora completamente indurite. L'indurimento
definitivo avviene con il calore che si sviluppa
durante la prima accensione. Durante questa
fase, che deve durare almeno 1,5 ore e a calore
intenso, non toccate le superfici della stufa e
arieggiate bene l'abitazione, per eliminare
rapidamente eventuali odori e vapori causati
dall'indurimento della vernice.
VI PREGHIAMO DI TENERE CONTO DEL
FATTO CHE solo dopo aver acceso la stufa varie
volte per un periodo prolungato, avvertirete il
caratteristico (e piacevole) odore della legna che
arde.
Combustibili adatti
Legna naturale e non trattata, secca e ben
conservata, tronchetti di legno pressato e
mattonelle di lignite.
Quantità massime di combustibili
La massima quantità di combustibile consigliata:
2,5 kg di legna oppure 2,3 kg di tronchetti di legno
pressato per volta. Non introducete quantità
eccessive di combustibile per evitare un
surriscaldamento ed un conseguente
danneggiamento della stufa.
Per una corretta accensione
Preparate tutto l'occorrente per accendere la stufa:
trucioli di legno dolce, accendifuoco (ad es.
Thermohit), carta (non patinata), e legna.
L'illustrazione 1 vi fornisce le indicazioni circa le
giuste quantità per l‘accensione.
Ill. 1: Materiali per l'accensione
Aprite al massimo la presa per l'aria primaria e
quella per l’aria secondaria, spostando le due
levette come indicato nella fig. 2 “AUF / aperto”.
Aprite ora l'antina.
Disponete dapprima della carta (non patinata) sul
fondo della camera di combustione, sopra di essa
una manciata di trucioli di legno dolce e poi 1 o 2
ceppi di legna.
Per ottenere una combustione corretta con un
minimo di emissioni la legna deve essere secca
(< 15 % di umidità relativa) e non trattata e non si
devono superare le quantità di combustibile
consigliate.
Ill. 2: Accensione
Dopo aver dato fuoco alla carta, chiudete l'antina e
attendete fino a quando i trucioli stanno bruciando
per poi chiudere la presa dell'aria primaria.
Spiegazione dei simboli
Combustione ed ecologia
Irony M
12
italiano
Quando anche i ceppi avranno incominciato a
prendere ben fuoco, potete regolare il rendimento
della stufa con la levetta dell'aria secondaria
(portandola nella posizione massima otterrete il
massimo del rendimento).
Questa operazione va ripetuta per ogni strato di
legna che vorrete aggiungere: aprite la presa
dell'aria primaria e quella dell'aria secondaria, poi
l'antina (facendo attenzione), aggiungete la legna e
richiudete infine l'antina. Attendete fino a quando
anche la nuova legna abbia preso ben fuoco e poi
chiudete nuovamente la presa dell'aria primaria,
regolando infine il rendimento con la levetta
dell'aria secondaria.
Ill. 3: Chiudere la presa dell'aria primaria
4. PROSPETTO DEI RICAMBI PRINCIPALI
Guarnizioni
Denominazione
Guarnizione piatta 8 x 2 mm
Guarnizione piatta 8 x 2 mm
Guarnizione tonda d =16 mm
N. su dis.
23
23
21
N. art.
710096
710096
715042
N. su dis.
4/8
5/7
6
11
1
2
10
9
3
N. art.
715013
715022
715014
715025
715023
715024
715177
715178
715090
N. su dis.
22
-----
N. art.
715132
640138
640067
640070
640085
Keramott
Denominazione
Keramott laterale sinistra/destra
Keramott angolare sinistra/destra
Keramott laterale posteriore
Keramott fermalegna
Keramott di base sinistra
Keramott di base destra
KE1 tagliafiamme 1
KE1 tagliafiamme 2
KE1/KE2 griglia
Numerazione dei refrattari = ordine da seguire per il
montaggio!
Altre parti
Denominazione
Irony M vetroceramico antina
vernice
Accendifuoco
Detergente vetroceramico 0,5l
Detergente per l’inox
Accessori
Presso il vostro rivenditore potete acquistare basi di protezione in vetro o acciaio, vari utensili per la stufa,
prodotti per la cura e pulizia ed anche l’ Heat Memory System per l’accumulazione termica.
IMPORTANTE: per la sostituzione di parti difettose rivolgetevi esclusivamene al vostro rivenditore di
Kaminofen, in questo modo avrete la garanzia che la vostra stufa continuerà a funzionare in modo
corretto e sicuro.
Pulizia
Per la pulizia del vetro ceramico dell'antina utilizzate gli appositi prodotti in vendita presso i rivenditori di
stufe (ad es. Thermohit). Le superfici laccate della stufa vanno pulite solamente con un panno
(eventualmente umido). Anche le superfici in acciaio inox vanno trattate con gli appositi detergenti.
italiano
13
5. Istruzioni di assemblaggio e di smontaggio
Rivestimento
Per facilitare le operazioni di trasporto è possibile
smontare le seguenti parti del rivestimento:
1. Sollevare la griglia frontale superiore (Pos. 1).
2. Togliere le due viti (Pos. 6).
3. Asportare ora l'elemento anteriore in ghisa del
piano superiore (Pos. 2)
4. Togliere le ceramiche del piano superiore (per
versioni con rivestimento acciaio) (Pos. 4 e 5).
5. Sollevare e sganciare il rivestimento laterale
sinistro e destro (Pos. 7 e 8).
6. Per non danneggiare la ceramica frontale ad
altezza cassetto ceneri (Pos. 3), svitare le 2 viti
(Pos. 9) dal rivestimento dello zoccolo (Pos.
10) e togliere la ceramica dal davanti.
Procedere in senso inverso per rimontare le parti.
Fig. 6: Elementi del rivestimento
Irony M
Irony M
14
français
1. CARACTÉRISTIQUES TECHNIQUES
Le poêle de type 1 peut être raccordé à une
cheminée déjà occupée par d’autres poêles ou
cuisinières à combustibles solides et liquides, à
condition toutefois que les dimensions de la
cheminée selon la norme DIN 4705 Partie 3
l’autorisent.
CARACTÉRISTIQUES TECHNIQUES
Hauteur
1430 mm
Largeur
800 mm
Profondeur
690 mm
Poids
265 kg
Poids avec habillage céramique
306 kg
Diamètre à la base du carneau
180 mm
Puissance calorifique selon DIN
8 kW
18891
Puissance calorifique maximale
11 kW
Puissance calorifique minimale
4 kW
Volume chauffé (selon
l’isolation du bâtiment)
90 – 180 m³
Caractéristiques des gaz de combustion en vue de
l’installation de plusieurs appareils sur une
cheminée selon DIN 4705 Partie 3 ou du
dimensionnement de la cheminée selon DIN 4705
Partie 2
Débit de gaz de
fermé
8 g/s
combustion
Température des gaz
fermé
300 °C
de combustion
Pression d’extraction
fermé
0,11 mbar
minimale à la puissance
nominale
à 0,8 fois la
puissance
nominale
0,09 mbar
Les informationes dans ce manuel, sont présentés
d’une façon générale. Car les règlements peuvent
varier de pays en pays ; et les règlements
régionaux peuvent être prioritaires.
Remarques générales concernant
la sécurité
•
•
•
•
•
•
•
Lisez attentivement l’ensemble du manuel
avant de mettre le poêle en service et
respectez les avertissements relatifs à la
sécurité.
Le transport de l’appareil doit toujours être
effectué au moyen d’un appareillage de
capacité suffisante.
Le poêle ne doit pas être utilisé comme
marchepied ou estrade.
La combustion libère de l’énergie
thermique qui entraîne un fort
échauffement de la surface de l’appareil,
des portes, des poignées, des vitres des
portes, du carneau et parfois de la face
avant de l’appareil. Ne touchez ces
éléments qu’avec une protection
adéquate, par exemple des gants isolants
ou un instrument d’actionnement.
Expliquez bien le risque de brûlures à vos
enfants et tenez-les loin de l’appareil
lorsque celui-ci fonctionne.
Utilisez toujours le combustible autorisé
selon le chapitre « Combustion non
polluante ».
La combustion ou l’introduction de
matières très inflammables ou explosives
dans le foyer, par exemple de bombes
•
•
•
•
•
aérosols vides, est strictement interdite en
raison du risque d’explosion, de même que
la conservation de tels produits à proximité
de l’appareil.
Ne rechargez pas le poêle alors que vous
portez des vêtements amples ou en
matières inflammables.
Il est interdit de déposer des objets ne
résistant pas à la chaleur sur l’appareil ou
à proximité.
Ne faites pas sécher de linge sur le poêle.
Les étendages et égouttoirs à linge ou
autres doivent être placés suffisamment
loin de l’appareil pour éviter tout risque
d’incendie.
Lorsque le poêle est en marche, ne
travaillez jamais avec des matières
facilement inflammables ou combustibles
dans le local où il se trouve ni dans une
pièce adjacente.
Installation du poêle
Distances de sécurité minimales
(Fig. 2)
1. Par rapport à des objets ininflammables :
a > 400 mm b > 200 mm
2. Par rapport à des objets inflammables et aux murs
porteurs en béton armé :
a > 800 mm b > 200 mm
(a : sur l’avant dans la zone de rayonnement)
(b : sur les côtés et l’arrière)
Si le montage s’effectue sur un sol combustible ou sensible
à la temperature, le poêle devra être installé sur un support
non combustible, par ex. sur une plaque en métal (de 50
cm de longueur et de 30 cm de largeur). Devant le poêle,
dans la zone de rayonnement de la vitre, environ 80 cm, il
ne doit pas se trouver de matériel combustible ou sensible
à la température.
Sous réserve de modifications techniques et optiques, ainsi que d'erreurs de composition et d'impression.
2. INFORMATIONS IMPORTANTES
français
15
Attention : le local dans lequel vous installez le
poêle doit être pourvu au minimum d’une porte ou
d’une fenêtre donnant à l’extérieur, ou
communiquer avec une autre pièce donnant à
l’extérieur.
Capacité portante du sol
Irony M
Raccordement du carneau
Pour votre sécurité, des consignes strictes doivent
être respectées pour le raccordement des
carneaux à la cheminée. Votre installateur
professionnel connaît bien ces règles. Il faut donc
impérativement confier à ce professionnel le
raccordement du carneau.
Avant d’installer l’appareil, vérifiez si le sol pourra
en supporter le poids.
3. POUR BIEN UTILISER VOTRE POÊLE
Première mise en service
Figure 3 indique la bonne quantité de matériaux à
disposer dans le foyer.
Votre poêle a été peint avec un vernis spécial non
polluant. Cet enduit est encore mou lors de la
livraison. Il ne durcit que lors de la première mise
en service. En attendant, ne touchez pas la
surface peinte. Laissez le poêle chauffer fortement
pendant au moins 1 heure 1/2. Le vernis peut
dégager des vapeurs visibles pendant qu’il durcit.
Il faut donc ouvrir une fenêtre avant la première
mise en service, afin d’évacuer rapidement ces
vapeurs.
ATTENTION : Il faut faire chauffer plusieurs fois
votre poêle pour qu’il ne sente plus que l’odeur
habituelle du bois qui brûle.
Combustibles autorisés
Bois naturel sec et bien conservé, briquettes de
bois ou de lignite.
Quantité maximale de
combustible
Au maximum 2,5 kg de bois ou 2,3 kg de
briquettes de bois. N’utilisez pas plus de
combustible, sous peine de provoquer une
surchauffe qui endommagera le poêle.
Fig. 3 : Matériaux combustibles
Ouvrez au maximum les arrivées d’entrée d’air
primaires et secondaires, en déplaçant les deux
coulisseaux (voir la Figure 2).
Ouvrez la porte du poêle.
Déposez du papier (non enduit) sur le fond du
foyer.
Déposez par-dessus une poignée de copeaux
puis 1 ou 2 bûches.
Le bois doit être sec (humidité relative < 15 %) et
non traité. Il doit être utilisé en quantité adéquate
pour obtenir une combustion propre et dégageant
peu d’émissions.
Pour bien faire du feu
Préparez tout ce dont vous avez besoin pour
allumer le poêle : copeaux de bois tendre, allumefeu, papier non enduit, bois de chauffage. La
Fig. 4 : Allumage
Allumez le papier.
Fermez la porte du foyer.
Dès que les copeaux brûlent bien, fermez le
coulisseau d’entrée d’air primaire.
Représentation des symboles
Combustion non polluante
Irony M
16
français
Dès que les bûches brûlent bien, réglez la
puissance de chauffage avec le coulisseau
d’entrée d’air secondaire (position maximale du
coulisseau = puissance maximale).
Pour recharger le poêle, suivez la même séquence
que pour l’allumage : ouvrez les coulisseaux
d’entrée d’air primaire puis d’entrée d’air
secondaire, ouvrez prudemment la pote du poêle,
ajoutez du bois et refermez la porte.
Attendez que le bois ajouté s’enflamme, puis
refermez le coulisseau d’entrée d’air primaire.
Réglez la puissance de chauffage avec le
coulisseau d’entrée d’air secondaire.
Fig. 5 : Fermeture du coulisseau d’entrée d’air
primaire
4. PRINCIPALES PIÈCES DÉTACHÉES
Joints
Désignation
Joint plat 8 x 2 mm
Joint plat 8 x 2 mm
Joint rond d = 16 mm
N° sur schéma
23
23
21
Réf. article
710096
710096
715042
Céramique réfractaire
Désignation
côte céramique gauche/droite
angle céramique gauche/droite
paroi arrière céramique
Pare-bûche
Fond céramique gauche
Fond céramique droit
KE1 déflecteur 1
KE1 déflecteur 2
KE1/KE2 grille en bas
N° sur schéma
4/8
5/7
6
11
1
2
10
9
3
Réf. article
715013
715022
715014
715025
715023
715024
715177
715178
715090
N° sur schéma
22
-----
Réf. article
715132
640138
640067
640070
640085
Numérotation des céramiques réfractaires =
instructions de montage!
Autres
Désignation
Irony M porte verre
Vernis pour poêle
Allume-feu bois et charbon
Nettoyant pour vitres 0,5l
Nettoyant pour inox
Accessoires
Vous trouverez chez votre revendeur spécialisé des plaques de fond en verre ou en métal, des
instruments de cheminée, des produits d’entretien et le système de stockage de chaleur Heat Memory.
IMPORTANT : Les pièces défectueuses doivent toujours être remplacées par votre revendeur
spécialisé, afin que le poêle reste sûr et en bon état de marche.
Entretien
Pour le nettoyage de la vitre, utilisez un produit pour vitre comme "Thermohit". Les parties laquées
doivent être nettoyés uniquement avec un chiffon (éventuellement humide). Utilisez pour les superficies
en inox, des produits spéciaux prévus pour ce revêtement.
français
17
5. INSTRUCTIONS DE MONTAGE/DÉMONTAGE
Habillage
Pour un transport plus facile, les parties
d'habillement suivantes peuvent être retirées :
1. Soulevez la tôle avant de convection (Pos. 1).
2. Retirez les deux vis de tôle (Pos. 6).
3. Retirez maintenant le couvercle avant en fonte
(Pos. 2)
4. Soulevez le couvercle en céramique (Pos. 4 et
5) ab.
5. Décrochez maintenant l'enveloppe complète
droite et gauche (Pos. 7 et 8) en la soulevant.
6. Pour éviter d'endommager la plaque parecendre (Pos. 3), il faut retirer les deux vis (Pos.
9) du cache du socle (Pos. 10) et enlever la
céramique vers l'avant.
L'assemblage s'effectue en sens inverse des
points cités ci-dessus.
Fig. 6: Parties d'habillage
Irony M
GARANTIE / GUARANTEE / GARANZIA / GARANTIE
2 Jahre Garantie
Two-Year Guarantee
Für Ihren AUSTROFLAMM-Kaminofen garantieren
wir für die einwandfreie Funktion aller Bauteile aus
Stahl und Guß 2 Jahre ab dem Erstverkaufsdatum.
Stahl- und Gußteile, die während der Garantiezeit
Material- und / oder Verarbeitungsmängel
aufweisen, werden gegen Neuteile ersetzt.
We guarantee full functionality of all
AUSTROFLAMM stove components made of steel
or cast iron for a full two years from the date of
purchase. Steel and cast-iron components which
show defect in materials or workmanship during
the guarantee period shall be replaced with new
components.
Wir gewähren keine Garantie auf Verschleißteile
(z. B.: Keramott, Dichtungen, Bodenrost),
Oberflächenbeschichtungen, Lack, Glas und
Keramiken.
We do not guarantee wearable components (such
as Keramott, gaskets, floor grid), surface coatings,
lacquer, glass and ceramics.
Voraussetzungen für unsere Garantieleistung sind:
Conditions of the Guarantee:
1. Ihr AUSTROFLAMM-Kaminofen wurde gemäß
dem Benutzerhandbuch betrieben und von
einem Fachmann installiert.
2. Der Garantieanspruch wird mit der vollständig
ausgefüllten Garantiekarte und der Rechnung
bei einem AUSTROFLAMM-Fachhändler
geltend gemacht.
1. Your AUSTROFLAMM stove was installed by
a certified professional and is operated in
accordance with the operator’s manual.
2. Claims to the guarantee shall be subject to a
completely filled-out Guarantee Card and
submittal of the original invoice issued by a
certified AUSTROFLAMM sales agent.
WICHTIG: Unsere Garantieleistung umfaßt die
IMPORTANT: Our guarantee includes free
kostenlose Lieferung der Neuteile. Arbeits- und
Wegzeiten werden dadurch nicht umfaßt. Eine
ungerechtfertigte Garantieinanspruchnahme wird
dem Betreiber rückbelastet.
shipping of new components. Work and travel
times are not included. Unwarranted claims shall
be re-invoiced to the operator.
--------------------------------------------------------------------------------------------------------------------------------------Im Garantiefall herausschneiden und Ihrem AUSTROFLAMM-Fachhändler vorlegen!
In the event of claims to the guarantee, separate here and present this proof of purchase to your certified AUSTROFLAMM dealer.
GARANTIE / GUARANTEE / GARANZIA / GARANTIE
Händlerstempel / Dealer’s Stamp / Timbro concessionario /
tampon du concessionnaire
Kaufdatum / date of purchase / Data d’acquisto / date
d’achat
Modellname / Name of Model / modello / nom du produit
IRONY M
angeschlossen von / Installed by / installato da / raccordée par
Serien No. / serial no. / No. di serie / no. de série
(siehe Typenschild / See manufacturer’s plate /
Vedi targhetta / voir plaque signalétique)
2 anni di garanzia
Garantie 2 ans
Noi garantiamo il buon funzionamento di tutti i
componenti in acciaio e ghisa della vostra
Kaminofen AUSTROFLAMM per una durata di 2
anni a partire dalla data della prima vendita. Le
parti in acciaio e ghisa che dovessero presentare
difetti di materiale e/o lavorazione durante il
periodo di garanzia verranno sostituite con parti
nuove.
Sono escluse dalla garanzia le parti soggette ad
usura (ad es. elementi in keramott, guarnizioni,
griglie della camera di combustione), nonché i
rivestimenti delle superfici, vernici, vetroceramico
ed elementi in ceramica.
Nous garantissons le bon fonctionnement de tous
les éléments en acier et en fonte des poêles
AUSTROFLAMM pendant 2 ans à compter de la
date du premier achat. Les pièces en acier et en
fonte présentant un défaut de matériau et/ou de
fabrication pendant la durée de la garantie seront
remplacées par des pièces neuves.
Nous déclinons toute garantie pour les pièces
d’usure (par ex. céramique réfractaire, joints, grille
de fond), les joints de surfaces, le vernis, les vitres
et les céramiques.
Conditions d’application de la garantie :
Per avere diritto alle prestazioni di garanzia:
1. La vostra Kaminofen AUSTROFLAMM deve
essere installata da personale specializzato e
fatta funzionare osservando le istruzioni del
manuale.
2. Occorre presentare la cartolina di garanzia
correttamente compilata e lo scontrino / la
fattura / la ricevuta fiscale ad uno dei
rivenditori AUSTROFLAMM.
IMPORTANTE: la nostra Garanzia copre la
fornitura gratuita delle parti nuove e non include
né la durata dell'intervento né la trasferta. I costi
collegati ad una richiesta ingiustificata di
prestazione di garanzia saranno addebitati
all'utente.
1. Votre poêle AUSTROFLAMM doit avoir été
installé par un spécialiste et utilisé
conformément au mode d’emploi.
2. La demande de garantie doit être présentée à
un revendeur spécialisé AUSTROFLAMM en
même temps que la carte de garantie
complétée et que la facture.
IMPORTANT : Notre service sous garantie
couvre le remplacement gratuit par des pièces
neuves. Les temps de travail et de déplacement
ne sont pas inclus. En cas de demande abusive
d’application de la garantie, nous présenterons à
l’utilisateur une facture correspondante.
Austroflamm GmbH, Austroflamm Platz 1, 4631 Krenglbach, Austria, Stand 06/03
GARANTIE / GUARANTEE / GARANZIA / GARANTIE
------------------------------------------------------------------------------------------------------------------------------------In caso di richiesta di garanzia, ritagliare la cartolina e presentarla al rivenditore AUSTROFLAMM!
Découpez selon les pointillés et présentez ce coupon à votre revendeur AUSTROFLAMM.
GARANTIE / GUARANTEE / GARANZIA / GARANTIE
Kunde / Customer / cliente / client
Marke
Stamp
Francobollo
affranchir
an/ to / per / pour

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement