Motorola D1000 Series
For D1001, D1002, D1003 and D1004
Digital Cordless Phone
Warning
Use only rechargeable batteries.
Welcome...
to your new Motorola D1000 Digital Cordless Phone!
•
All handsets fully cordless for locating anywhere within range.
•
100 Name and number phonebook.
•
Copy phonebook entries between other handsets.
•
Caller Display shows you who’s calling and see details of the
last 50 callers in a Calls list.1
•
Register up to 5 handsets to a single base and register each
handset with up to 4 different bases.
•
Make internal calls, transfer external calls, hold 3-way conversation between two internal callers and an external caller.
1
You must subscribe to your network provider’s Caller Display or Call
Waiting service for these features to work. A quarterly fee may be
payable.
Please note that this equipment is not designed for making emergency
telephone calls when the power fails. Alternative arrangements should
be made for access to emergency.
This User Guide provides you with all the information
you need to get the most from your phone.
Before you make your first call you will need to set up your phone.
Follow the simple instructions in ‘Getting Started’, on the next few pages.
IMPORTANT
Only use the telephone line cord supplied.
If you have purchased a D1000 multiple pack you will also
have the following additional items:
This equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be
made for access to emergency services.
•
D1000 handset & charger
•
2 x AAA NiMH rechargeable batteries
•
Mains power adaptor for the charger
Got everything?
• D1000 handset
•
D1000 base
•
User guide
•
2 x AAA NiMH rechargeable batteries
•
Mains power adapter for the base
•
Telephone line cord
2.
3.
4.
5.
Getting started...................................................................................................................... 5
Location.................................................................................................................................. 5
Setting up ............................................................................................................................... 5
Connecting up the base ......................................................................................................... 5
Connecting the handset and charger (Multi-pack only).......................................................... 5
Setting up your D1000 ........................................................................................................... 6
Welcome screen ............................................................................................................. 6
Set date and time manually.................................................................................................... 6
Getting to know your phone ............................................................................................... 7
Overview of your handset ...................................................................................................... 7
Handset display...................................................................................................................... 8
Overview of the base ............................................................................................................. 8
Navigating the menus ............................................................................................................ 8
Menu map .............................................................................................................................. 9
Using the phone ................................................................................................................. 10
Calls ..................................................................................................................................... 10
Make a call ................................................................................................................... 10
Pre-dial ......................................................................................................................... 10
Dial one touch numbers 1 to 9 ..................................................................................... 10
Call from the phonebook .............................................................................................. 10
Call from the calls list ................................................................................................... 10
Answer a call ................................................................................................................ 10
Adjust volume ............................................................................................................... 10
Mute ............................................................................................................................. 10
End a call ...................................................................................................................... 10
Switch handset on/off ................................................................................................... 10
Call a second external number ............................................................................................ 10
Intercom ............................................................................................................................... 10
Call another handset .................................................................................................... 11
Transfer an external call to another handset ................................................................ 11
Three-party conference call .......................................................................................... 11
Voicemail.............................................................................................................................. 11
Dial your network voicemail service ............................................................................. 11
Phonebook.......................................................................................................................... 11
View and dial phonebook entries ......................................................................................... 11
Store an entry....................................................................................................................... 11
Entering names .................................................................................................................... 11
Character map ..................................................................................................................... 12
Enter a pause....................................................................................................................... 12
View an entry ....................................................................................................................... 12
Edit an entry ......................................................................................................................... 12
Delete an entry..................................................................................................................... 12
Delete all entries .................................................................................................................. 12
Copy phonebook to another handset ................................................................................... 12
One touch keys .................................................................................................................... 12
Dial a one touch number ...................................................................................................... 13
Store a phonebook entry as a one touch number ................................................................ 13
Delete a one touch number.................................................................................................. 13
Caller display and Calls list............................................................................................... 13
Calls list................................................................................................................................ 13
View the calls list .......................................................................................................... 13
6.
7.
8.
Dial from the calls list ....................................................................................................13
Save a number from the calls list to the phonebook .....................................................14
Delete a calls list entry ..................................................................................................14
Delete entire calls list ....................................................................................................14
Redial ...................................................................................................................................14
Redial the last number ..................................................................................................14
View and dial a number in the redial list .......................................................................14
Copy a redial number to the phonebook .......................................................................14
Delete a redial list entry ................................................................................................14
Delete entire redial list ..................................................................................................14
Clock & Alarm .....................................................................................................................15
Set date and time .................................................................................................................15
Set alarm ..............................................................................................................................15
Set alarm melody..................................................................................................................15
Personal settings................................................................................................................15
Handset tones ......................................................................................................................15
Ring volume ..................................................................................................................15
Ring melody ..................................................................................................................15
Group melody ...............................................................................................................15
Key tones on/off ............................................................................................................15
First ring ........................................................................................................................16
Handset name ......................................................................................................................16
Auto pick up ..........................................................................................................................16
Auto hang up ........................................................................................................................16
Room Monitor on/off .............................................................................................................16
Room Monitor .......................................................................................................................16
Backlight on/off .....................................................................................................................16
Keypad lock ..........................................................................................................................16
Advanced settings..............................................................................................................17
Recall time ............................................................................................................................17
Dial mode .............................................................................................................................17
Temporarily switch from Pulse to Tone dialling ............................................................17
Call barring ...........................................................................................................................17
Switch call barring on/off ...............................................................................................17
Set a number to be barred ............................................................................................17
Easy call ...............................................................................................................................17
Switch easy call on/off ..................................................................................................17
Set the easy call number ..............................................................................................17
Dial an easy number .....................................................................................................17
Registration ..........................................................................................................................18
Register a handset ...............................................................................................................18
Select a base ........................................................................................................................18
Unregister a handset ............................................................................................................18
PIN........................................................................................................................................18
Reset ....................................................................................................................................18
Default settings.....................................................................................................................18
Auto prefix ............................................................................................................................19
Country .................................................................................................................................19
Intrusion ................................................................................................................................19
ECO mode ............................................................................................................................19
3
EN
1.
9. Help......................................................................................................................................20
10. General information............................................................................................................21
Important safety instructions.................................................................................................21
Installation Guidelines...........................................................................................................21
Battery Safety Instructions....................................................................................................21
Cleaning................................................................................................................................21
Environmental.......................................................................................................................21
Product disposal instructions ................................................................................................22
Consumer Products and Accessories Warranty ...................................................................22
R&TTE ..................................................................................................................................23
Connecting to a switchboard ................................................................................................23
Inserting a pause ..................................................................................................................23
Recall....................................................................................................................................23
11. Wall mounting .....................................................................................................................24
4
Connecting up the base
EN
1. Getting started
WARNING
Do not place your D1000 in the bathroom or other humid areas.
Location
You need to place your D1000 base within 2 metres of the mains power socket and telephone
socket so that the cables will reach.
Make sure it is at least 1 metre away from other electrical appliances to avoid interference. Your
D1000 works by sending radio signals between the handset and base. The strength of the signal
depends on where you place the base. Putting it as high as possible ensures the best signal.
HANDSET RANGE
The D1000 has a range of up to 300 metres outdoors when there is a clear line of sight between
the base and handset. Any obstruction between the base and handset will reduce the range
significantly. With the base indoors and handset either indoors or outdoors, the range will normally
be up to 50 metres. Thick stone walls can severely affect the range.
SIGNAL STRENGTH
Plug the mains power cable with the clear connector into the socket marked
on the
underside of the base and plug the other end into the mains power wall socket and switch the
power on.
If you are on a call, the line will hang up if the handset moves out of range of the base. Move back
within in range. The handset will automatically re-connect to the base.
Connecting the handset and charger (Multi-pack only)
The
icon on your handset indicates when you are in range. When out of range of the base,
the screen shows SEARCHING and the
flashes.
Setting up
IMPORTANT
The base station must be plugged into the mains power at all times. Do not connect the telephone
line cord into the wall socket until the handset is fully charged. Only use the power and telephone
cables supplied with the product.
If you have purchased a multiple pack, this process will need to be carried out for all handsets and
chargers:
1. Plug the mains power cable with the red connector into the socket marked
underside of the charger.
on the
WHICH POWER ADAPTOR?
The power adaptor with a clear connector is for the base unit and the power adaptor with a red
colour connector is for the charger unit.
2. Insert the 2 x AAA NiMH batteries supplied into the handset. Then slide the compartment
cover into place.
Getting started
5
3. Place the handset on the charger to charge for at least 24 hours. When the handset is fully
charged the
icon will indicate that it is fully charged.
4. When the handset is fully charged after 24 hours, plug the telephone line cord from the large
base into the telephone wall socket.
IMPORTANT
Warning! Use only rechargeable batteries. If non-rechargeable batteries are used WARNING BATT will
be displayed and charging will be stopped. Please replace with rechargable batteries.
BATTERY LOW WARNING
If the
again.
icon flashes in the display, you will need to recharge the handset before you can use it
During charging, the
icon will scroll in the display.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 100 hours
standby time on a single charge.
Note that new batteries do not reach full capacity until they have been in normal use for several
days.
To keep your batteries in the best condition, leave the handset off the base for a few hours at a
time.
Running the batteries right down at least once a week will help them last as long as possible.
The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the
handset less talk/standby time. Eventually they will need to be replaced.
After charging your handset for the first time, subsequent charging time is about 6–8 hours a day.
Batteries and handset may become warm during charging. This is normal.
Setting up your D1000
Welcome screen
1. WELCOME is displayed. Press m. The country name is shown on the display.
2. Scroll u or d to your country and press m. CONFIRM? is displayed.
3. Press OK to confirm.
The handset and base will reset to load the correct settings. The standby screen is then
displayed and your phone is ready to use.
You can still make and receive calls without first selecting your country and network operator,
however the Welcome screen will re-appear until you have configured your phone country
settings.
Date and time
Providing you have subscribed to your network’s Caller Display service, the date and time is set
automatically for all handsets every time a call is received.
If you do not have a Caller Display service you can set the date and time manually.
Set date and time manually
1. Press m and scroll d to CLOCK/ALARM. Press m. Display shows DATE & TIME, then press
m.
2. Enter the date using the format DD/MM e.g. 04/ 08 for 4th August.
3. Press m and enter the time using the 24 hour format HH:MM,
e.g. 14:45 for 2:45pm.
4. Press m to confirm or > to return to standby.
Your D1000 is now ready for use.
6
Getting started
Overview of your handset
D Redial / Scroll right / Clear / Mute
Open the redial list. Scroll to the right.
Delete characters on screen when entering names and numbers.
Mute / unmute the microphone during a call. Go back to previous menu level – BACK displayed on
screen.
E Call log / Scroll Up / Volume up
Open the calls log.
Scroll up through lists and settings.
Increase the earpiece volume during a call.
F Talk / Recall
Make or answer a call.
Use recall (R) functions.
G End / Exit / Switch handset on/off
End a call.
When in a menu, go back to standby mode. Press and hold to switch handset off (when in
standby) or on.
H Phonebook / Scroll Down / Volume down
Open the phonebook.
Scroll down through lists and menus.
Decrease the earpiece volume.
I
Navigator glow ring
Illuminates when the phone is in use. Flashes to indicate new event, eg. missed call.
J * / Keypad lock
Press and hold to lock/unlock the keypad.
During a call, press and hold to switch from pulse dialling to tone dialling.
Dial a star.
K # / Ringer off / Pause
Press and hold to switch handset ringer on or off.
When dialling or storing a number, press and hold to enter a pause (P).
Dial a #.
L Loudspeaker key
Activate and deactivate the loudspeaker during a call.
WARNING
Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make
sure the handset is not too close to your ear.
A
Earpiece
B Display
See page 8 for an overview of the display icons.
M Intercom (at least 2 handsets needed)
In standby mode, use to make an internal call.
During a call, use to transfer an external call to another handset.
C Menu key
Enter the main menu. Select the option displayed on screen. Confirm menu option – OK is
displayed on screen.
Getting to know your phone
7
EN
2. Getting to know your phone
Handset display
C ! " displayed
Press u or d to scroll through the options in a menu, to open the phonebook or calls list when in
standby.
D Back ! displayed
Press e to go back to the previous menu option, to cancel an action or to delete a character.
Overview of the base
A
Display icons
On when the line is in use.
Flashes when there is an incoming call.
Flashes when you have new voicemail messages.
Off when you have no voicemail messages.
Flashes when you have missed calls and new number(s) are in the Calls list.
Phonebook is open.
The alarm clock has been set.
Handsfree mode.
Handset ringer is off.
Steady when the handset is registered and within range of the base. Flashes when the
handset is out of range or searching for base.
The approximate power levels of your battery are indicated as below:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Battery is almost empty. The battery icon will flash and emit a warning beep every
minute during call.
B OK displayed
Press the m key to select and validate a setting
8
A Paging key
Paging is a useful way of finding lost handsets.
1. Press p on the base.
- All handsets ring.
2. Press p again to cancel the paging call or press any key on the handset to stop the paging
call.
Navigating the menus
The basic steps of navigating through the menu and on-screen options.
1. From the standby screen, press m.
The main menu is opened.
2. Use the u or d keys to scroll through the menu.
3. Soft key options OK and BACK are displayed. Press m to select OK and open a sub-menu or
validate an option.
Press BACK and go back to previous menu level, correct a character or cancel an action.
4. Press
>
to return to standby.
If you do not press any button on the handset for 15 seconds the display will automatically return
to standby. It will also return to standby when the handset is placed on the base or charger.
Getting to know your phone
PHONEBOOK
CLOCK/ALARM
PERSONAL SET
ADVANCED SET
NEW ENTRY
DATE & TIME
HANDSET TONE
RECALL TIME
LIST ENTRY
SET ALARM
RING VOLUME
DIAL MODE
ALARM TONE
RING MELODY
CALL BARRING
EDIT ENTRY
GROUP MELODY
EASY CALL
DELETE ENTRY
KEY TONE
REGISTRATION
<NAME>
DELETE ALL
FIRST RING
EN
Menu map
SELECT BASE
REGIST. BASE
DIRECT MEM
HANDSET NAME
PB TRANSFER*
AUTO PICK-UP
UNREGISTER
AUTO HANG-UP
PIN
ROOM MONITOR
RESET UNIT
BACKLIGHT
PREFIX
SEL. COUNTRY
INTRUSION
ECO MODE
*This option is only available if more than one D1000 handset is registered to the base.
Getting to know your phone
9
3. Using the phone
Calls
TIP
If Auto Pick up mode (see page 16) is on, simply lift up the handset from its base to answer the
call. The default setting is On.
NOTE
Make a call
An incoming call has priority over other events. Whenever there is an incoming call, other
operations in progress such as phone settings, menu navigation, etc. will be ended.
1. Press <.
2. Dial the telephone number.
Adjust volume
Pre-dial
1. Enter the phone number (maximum 24 digits). If you make a mistake press e.
1. During a call, press u or d to adjust the earpiece or loudspeaker volume.
- The level is shown in the handset display.
2. Press < to dial the phone number entered.
Mute
Dial one touch numbers 1 to 9
Mute the microphone so that you can talk to someone else in the room without your caller hearing
you.
Call from the phonebook
1. During a call, press e.
- The microphone is muted.
2. Press e again to turn the microphone back on.
1. Press and hold a key from 1 to 9 until the number is displayed and dialled.
- If no number is stored, you hear a beep.
1. Press d. The first entry in the phonebook is displayed.
2. Scroll u or d to the entry you want.
3. Press < to dial the number.
TIP
Instead of scrolling to browse the phonebook entries, press the numeric key corresponding to the
first letter of the entry you wish to locate. For example, pressing 2 will show the entries starting
with A. Pressing 2 again will show the entries starting with B, etc...
Call from the calls list
You need to subscribe to your network’s Caller Line Identification service to be able to see the
caller’s number in the calls list. See “Calls list” on page 13 for more details.
1. Press u to enter CALL LIST. The first entry in the call list is displayed.
2. Scroll u or d to the entry you want.
3. Press < to dial the number.
1. When the phone rings and
call via the loudspeaker.
flashes in the display, press < or press v to answer the
WARNING
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing. Handsfree activation can suddenly increase the volume in the earpiece to a very high
level. Make sure the handset is not too close to your ear.
NOTE
If you have subscribed to your Network’s Caller Identity service and assigned a VIP Group to the
caller’s number, the caller’s details are displayed before the phone starts ringing (see “Store an
entry” on page 11 and “Group melody” on page 15). You can set your phone to give the default
ringtone as soon as the call is received then once the caller’s identity is displayed, the assigned
ringtone will start. See “First ring” on page 16.
10
1. Press >.
After you hang up, the duration the phone is off-hook is displayed for 5 seconds.
NOTE
If auto hang-up is on (see page 16) simply replace the handset on the base to end the call. The
default setting is ON.
Switch handset on/off
NOTE
Answer a call
End a call
1. Press and hold > until the handset switches off.
2. Press and hold > again to switch the handset back on.
Call a second external number
Put an external caller on hold to make a second external call. You can then switch between both
callers or hold a 3-way conference call.
1. During your call, press m. Scroll d to INIT 2ND CALL.
2. Press m.
- Display shows CALLING R
3. Enter the second number.
4. When your second caller answers, press m to open the option menu:
CONFERENCE – press m to initiate a 3-way with an external caller and internal caller.
SWITCH CALLS – press m to switch between the two callers.
5. Press > to hang up.
Intercom
This feature is only available when there are at least 2 registered handsets. It allows you to make
internal calls, transfer external calls from one handset to another and use the conference option.
Using the phone
1. Press I.
• If you have two handsets, the other handset is called automatically.
• If more than two handsets are registered to the base, their numbers are displayed, e.g. 2345*.
Enter the number of the handset you want to call or press * to ring all handsets.
2. Press > to hang up.
NOTE
If the handset does not belong to D1000/1010 range, this function may not be available.
Transfer an external call to another handset
1. During an external call, press I.
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press * to ring all handsets.
- If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the caller then press > to transfer the call. If
the other handset does not answer, press I to talk to your caller again.
Three-party conference call
1. During an external call, press I.
- Your caller is put on hold.
2. Enter the number of the handset you want to call or press * to ring all handsets.
- If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the call then press and hold I to connect
both calls. If the other handset does not answer, press I to talk to your caller again.
4. Press > to hang up.
4. Phonebook
EN
Call another handset
The D1000 handset phonebook can store up to 100 names and numbers.
NOTE
Numbers can be up to 24 digits long and names up to 12 characters long. Entries are stored in
alphabetical order.
View and dial phonebook entries
1. Press d. Display shows the first entry.
2. Scroll u or d to the entry you want.
Or
To search alphabetically, press d then press the key with the first letter of the name, e.g. if
the name begins with N, press 6 twice.
- The display shows the first entry beginning with N. If required, press u or d to scroll to the
exact entry.
3. Press < to dial the entry displayed.
Store an entry
1. Press m. PHONEBOOK is displayed.
2. Press m. NEW ENTRY is displayed.
3. Press m. ENTER NAME is displayed.
4. Enter a name and press m.
5. Enter a number. Press m to save. Press u or d to select NO GROUP, GROUP A, B or C and press
m to confirm.
6. Press > to return to standby.
NOTE
Voicemail
If you have subscribed to your network’s voicemail service (if available), your D1000 displays
when you have a new message. Depending on your country and network services, the
voicemail number may be pre-stored in your handset for one touch dialling using the 1 button.
You can assign individual contacts to specific groups of your choice. For example, Group A
contains phone numbers of all your co-workers. You can also assign a specific ring melody to that
group (see “Group melody” on page 15). You can benefit from this feature only if you have
subscribed to Caller Line Identification service from your network provider. If it is the case, every
time someone from that group calls you, you will hear the designated ringtone for that group.
NOTE
NOTE
The voicemail number is pre-stored only if the country where the phone was purchased offers a
voicemail service. If the voicemail number is not pre-stored you can add a number, or overwrite
the existing stored number. See page 13.
Dial your network voicemail service
1. Press and hold 1.
- The number is displayed and dialled. Follow the voice prompts to play, save and delete
your messages.
Or
If
is displayed in a call list, press < to dial the network voicemail number.
NOTE
You can turn off the
Phonebook
icon. When viewing the Calls log, press and hold 5.
Cancel storing an entry by pressing > at any time during the process.
Entering names
Use the alphanumeric keypad to enter names in the phonebook.
For instance to enter the name Paul
P
A
U
L
Press 7 once
Press 2 once
Press 8 twice
Press 5 three times
11
To enter a space press 1
3. Press > to cancel the phonebook display.
4. Press > again to end the call.
Character map
Edit an entry
1. Press d.
2. Scroll u or d to the entry you want to edit and press m. EDIT ENTRY is dsplayed. Press m
Press e to delete a character or press and hold e to delete all characters.
Use the keypad to enter names and characters.
1
2
3
4
5
6
7
8
9
0
Space
1
-
A
B
C
2
<
D
E
F
3
G
H
I
4
J
K
L
5
M
N
O
6
P
Q
R
S
7
T
U
V
8
?
>
*
Edit the name and press m to confirm. Use e to delete characters.
Press m and edit the number.
Press m to confirm.
Scroll u or d to select NO GROUP, GROUP A, B or C and press m to confirm.
Press > to return to standby.
Delete an entry
1. Press d.
W
X
Y
Z
9
0
-
/
\
#
2.
3.
4.
5.
+
Enter a pause
If your D1000 is connected to a switchboard, you may need to enter a pause in a stored number.
This gives the switchboard time to get an outside line. A Pause is normally stored after the
switchboard access code (e.g. 9)
1. When storing a number, press and hold # until the display shows P. You can then continue
storing the phone number.
View an entry
In standby:
1. Press d.
2. Enter the first letter of the name to search alphabetically then scroll u or d to the exact entry.
The name is displayed.
3. Press e to display the number. If there are more than 12 digits, press e again to see
the rest of the number.
4. Press > to return to standby.
During a call:
1. Press m twice to open the phonebook menu.
2. Enter the first letter of the name you want then scroll u or d if necessary to the exact name.
Press e to display the number. If there are more than 12 digits, press e again to see
the rest of the number.
12
again.
3.
4.
5.
6.
7.
Scroll to the entry you want to delete and press m.
Scroll d to DELETE ENTRY and press m.
Display shows CONFIRM?. Press m.
Press > to return to standby.
Delete all entries
1. Press m twice.
2. Scroll d to DELETE ALL and press m.
3. Display shows CONFIRM?. Press m.
4. Press > to return to standby.
Copy phonebook to another handset
1. Press m twice.
2. Scroll d to PB TRANSFER and press m.
3. Scroll u or d to the number of the handset you want the phonebook copied to. Press m.
On the receiving handset:
1. TRANS. FROM: HANDSET X (where X is the handset number of the sending handset) is displayed.
Press m to start the copying process.
2. When DONE! is displayed on both handsets, press > to return to standby.
NOTE
If an entry with the same name and number is already stored in the receiving handset, it will not
be copied across.
One touch keys
The keys 1 to 9 enable one touch dialling of entries stored in the phonebook.
Phonebook
5. Caller display and Calls list
- The number is displayed and dialled.
2. Press > to cancel the dialling and return to standby.
If you have subscribed to Caller Line Identification (CLI), and provided the identity of the caller is
not withheld, the number of the caller will be displayed together with the date and time of the call
(if provided by the network).
Store a phonebook entry as a one touch number
1. Press m twice.
2. Scroll d to DIRECT MEM and press m.
3. Press u or d to select KEY 1 - 9 and press m. The current entry, if any, is displayed.
4. Press m again to open the options menu.
5. Press m to ADD an entry from the phonebook.
6. Scroll u or d to the entry you want. Press m to confirm or > to return to standby.
NOTE
Delete a one touch number
1. Press m twice then scroll u or d to DIRECT MEM and press m.
2. Scroll u or d to select KEY 1- 9.
3. Press m to display the current entry. Press m again to open the options menu.
4. Scroll d to DELETE and press m.
5. Display shows CONFIRM?. Press m.
6. Press > to return to standby.
• If the caller’s number is stored in your phonebook along with a name, the name will also be
displayed.
• If the telephone number is not available for incoming calls, the handset will display UNAVAILABLE.
• Information about incoming calls will vary by country and network operator. Some operators
may charge a subscription for their Caller Line Identification service.
Calls list
The calls list contains details of missed and received call. Details include the date and time of the
call. Entries are displayed in chronological order with the most recent call at the top of the list.
NOTE
• When the calls list is full, a new call replaces the oldest in the list.
• The received and missed calls log holds details of up to 50 calls.
• If you receive more than one call from the same number, only the most recent call is kept in the
calls list.
When you have missed calls (incoming calls that you haven’t answered) the
icon will be
displayed in the display on all handsets registered to the base.
If one handset is used to view the calls log, the icon on the other handsets continue to flash
(Multipack user only).
View the calls list
1. Press u to enter CALL LIST.
- The most recent number or name if stored in the phonebook is displayed. New calls are
marked with
icon flashing.
2. Scroll u or d through the calls log.
At the end of the log, you will hear a beep.
Press e to see the number. If the number has more than 12 digits, press e to see the
rest of the number.
3. Press > to return to standby.
NOTE
The
icon stops flashing once all new calls have been viewed.
Dial from the calls list
1. Press u to enter CALL LIST. The most recent call is displayed.
2. Scroll u or d to the entry you want.
3. Press < or v to dial.
Caller display and Calls list
13
EN
Dial a one touch number
1. Press and hold a number key 1 to 9.
Save a number from the calls list to the phonebook
Press u. The most recent call is displayed.
Scroll u or d to the number you want.
Press m then scroll d to SAVE NUMBER and press m.
Press m. ENTER NAME is displayed. Use the keypad to enter the name.
Press m then the number is displayed, the user can then edit the number if required and
must press m to save the number (even if has not been edited).
6. Press u or d to select NO GROUP, GROUP A, B or C and press m to confirm.
7. Display shows CONFIRM?. Press m to confirm.
8. Press > to return to standby.
1.
2.
3.
4.
5.
Delete a calls list entry
1.
2.
3.
4.
5.
Press u. The most recent call is displayed.
Scroll u or d to the number you want.
Press m then scroll d to DELETE and press m.
Display shows CONFIRM?. Press m to confirm.
Press > to return to standby.
6. Press u or d to select NO GROUP, GROUP A, B or C and press m
to confirm.
7. Press > to return to standby.
Delete a redial list entry
1. Press e. Scroll u or d to display the number you want.
2. Press m and scroll d to DELETE then press m.
3. Display shows CONFIRM?. Press m to confirm, then > to return to standby.
Delete entire redial list
1. Press e then press m.
2. Scroll d to DELETE ALL and press m.
3. Display shows CONFIRM?. Press m to confirm. Press > to return
to standby.
Delete entire calls list
1.
2.
3.
4.
5.
Press u. The most recent call is displayed.
Scroll u or d to the number you want.
Press m then scroll d to DELETE ALL and press m.
Display shows CONFIRM?. Press m to confirm.
Press > to return to standby.
Redial
The D1000 lets you redial any of the last 10 numbers called. Numbers can be up to 24 digits long.
Redial the last number
1. Press e. The last number dialled is displayed.
If the number has more than 12 digits, the display shows ! and the cursor blinks. Press e
to display the rest. If the number is stored in the Phonebook, the name is displayed as well.
2. Press < to dial.
View and dial a number in the redial list
1. Press e. The last number dialled is displayed.
If required, scroll u or d to display the number you want.
2. Press < to dial the number.
Copy a redial number to the phonebook
1.
2.
3.
4.
5.
Press e and scroll u or d to the entry you want.
Press m.
Display shows SAVE NUMBER. Press m.
Enter the name and press m.
Edit the number if required and press m.
14
Caller display and Calls list
7. Personal settings
If you subscribe to your network’s Caller Identification service, the time on your D1000 may be set
automatically each time you receive a call, depending on your network provider.
Handset tones
You can also set or adjust the time using the Clock & Alarm menu.
When the phone is ringing, avoid holding the earpiece too close to your ear as it may damage your
hearing.
Set date and time
1. Press m and scroll d to CLOCK/ALARM. Press m. Display shows DATE & TIME, then press
m.
2. Enter the date using the format DD/MM e.g. 04/ 08 for 4th August.
3. Press m and enter the time using the 24 hour format HH:MM,
e.g. 14:45 for 2:45pm.
4. Press m to confirm.
5. Press > to return to standby.
NOTE
The date and time is retained during a power failure or when the batteries are discharged.
Set alarm
1. Press m, scroll d to CLOCK/ALARM and press m.
2. Scroll d to SET ALARM and press m.
3. Scroll u or d to OFF, ON ONCE or ON DAILY and press m.
icon is displayed.
The alarm will ring at the medium level. ALARM ON and the
Set alarm melody
There are three alarm ringtones.
1. Press m and scroll d to CLOCK/ALARM.
Press m.
2. Scroll d to ALARM TONE and press m.
- Melodies are played.
3. Scroll u or dand press m.
Ring volume
Choose from: Ringer Off, Low, Medium, High, Boost and Progressive (increasing ring volume).
NOTE
The default setting is High.
1.
2.
3.
4.
5.
6.
Press m, scroll d to PERSONAL SET and press m.
HANDSET TONE is displayed. Press m.
RING VOLUME is displayed. Press m.
Scroll u or d to adjust the ringer volume level.
Press m to save the settings.
Press > to return to standby.
Choose from 10 ringer melodies.
5. Press > to return to standby. When the alarm goes off, press any key to stop the ring.
Once the alarm is set to on, the
WARNING
Ring melody
4. If you select ON ONCE or ON DAILY, enter the time using the 24 hour format HH - MM e.g 14:45 for
2:45pm and press m.
NOTE
EN
6. Clock & Alarm
will flash on the display.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to RING MELODY. Press m.
3. Press u or d to select the ringtone.
- A sample of the ringtone is played.
4. Press m to confirm.
5. Press > to return to standby.
Group melody
To benefit from this feature, you must subscribe to the Caller Line ldentification service.This menu
enables you to select and set the melodies to be played when there is an external incoming call
from a contact whose name is stored in your phonebook and is part of a group. You can associate
1 ring melody to each group. There are three phonebook groups (Group A, B, C) available for you
to organize your contacts. Each group can be assigned a unique melody.
1.
2.
3.
4.
5.
Press m, scroll d to PERSONAL SET and press m.
HANDSET TONE is displayed. Press m and scroll d to GROUP MELODY. Press m.
Scroll u or d to select: GROUP A, B or C, then press m.
Press u or d to select the ringtone you want for the group and press m.
Press > to return to standby.
Key tones on/off
When you press a key on the handset you hear a beep. You can switch these beeps on or off.
1. Press m, scroll d to PERSONAL SET and press m.
2. HANDSET TONE is displayed. Press m and scroll d to KEY TONE. Press m.
3. Scroll u or d to select ON or OFF.
Clock & Alarm
15
4. Press m to confirm.
5. Press > to return to standby.
Room Monitor on/off
First ring
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to ROOM MONITOR. Press m.
3. Press u or d to select ON or OFF.
4. Press m to confirm.
When switched On, you can leave this handset in the room you wish to monitor. Only the
microphone is on. Anyone in the room cannot hear you.
Your D1000 will automatically detect the Caller identification (Subscription dependent). If you do
not wish to hear the ring before the caller identification is displayed you can manually set FIRST
RING to OFF. The default setting is ON.
1.
2.
3.
4.
5.
Press m, scroll d to PERSONAL SET and press m.
HANDSET TONE is displayed. Press m and scroll d to FIRST RING. Press m.
Scroll u or d to select ON or OFF.
Press m to confirm.
Press > to return to standby.
Handset name
Personalise your handset, with a name or location for example Peter or Bedroom. Maximum 10
characters.
1.
2.
3.
4.
Press m, scroll d to PERSONAL SET and press m.
Scroll d to HANDSET NAME and press m. The current name is displayed.
Press e to delete the current name.
Enter the name you want – maximum 10 characters and press m
to save.
Leave one handset in a room and use another handset to hear sounds in that room.
Room Monitor
1. Switch a handset’s room monitor mode setting On and place that handset in the room.
2. At a second handset, press I and enter the number of the handset you are using as a
room monitor. You can now hear sounds coming from the room.
TIP
To stop room monitoring at any time, press >.
WARNING
This product is not intended for use as a baby safety device and is not a substitute for adult
supervision.
With Auto pick up switched on, you can answer a call just by lifting the handset off the base or
Backlight on/off
1. Press m, scroll d to PERSONAL SET and press m.
2. Scroll d to BACKLIGHT. Press m.
3. Press u or d to select ON or OFF.
4. Press m to confirm.
charger. If switched off, you will have to press < to answer a call. The default setting is On.
Keypad lock
5. Press > to return to standby.
Auto pick up
1.
2.
3.
4.
5.
Press m, scroll d to PERSONAL SET and press m.
Scroll d to AUTO PICK UP. Press m.
Scroll u or d to select ON or OFF.
Press m to confirm.
Press > to return to standby.
Auto hang up
Prevent accidental dialling while carrying the handset by locking the keypad.
1. Press and hold *.
- The display shows KEYS LOCKED.
2. To unlock the handset, press and hold * again.
NOTE
While the keypad is locked, you can answer incoming calls as normal.
With Auto hang up switched on, you can end a call just by replacing the handset on the base or
charger. If switched off, you have to press > to hang up. The default setting is On.
1.
2.
3.
4.
5.
Press m, scroll d to PERSONAL SET and press m.
Scroll d to AUTO HANG UP. Press m.
Scroll u or d to select ON or OFF.
Press m to confirm.
Press > to return to standby.
16
Personal settings
This setting is useful to access certain network and PABX/switchboard services.
Recall time
The default D1000 recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1.
2.
3.
4.
5.
Press m, scroll d to ADVANCED SET and press m.
RECALL TIME is displayed. Press m.
Press u or d to select the setting you want: SHORT, MEDIUM, LONG.
Press m to confirm.
Press > to return to standby.
NOTE
Set a number to be barred
Press m, scroll d to ADVANCED SET and press m.
Scroll d to CALL BARRING. Press m.
Enter the master PIN (default setting 0000) and press m.
Scroll d to NUMBER. Press m.
If necessary, scroll u or d to the next available slot.
Press m and enter the number or prefix you want to bar. Press m
to confirm.
7. Press > to return to standby.
1.
2.
3.
4.
5.
6.
Easy call
When activated, this feature allows you to dial a number by pressing any key on your handset
(except >). This feature is very useful for access to emergency services.
The use of your D1000 cannot be guaranteed on all PABX.
Switch easy call on/off
Dial mode
1.
2.
3.
4.
The default D1000 dialling mode is suitable for your country and network operator. It is unlikely
that you should need to change this setting unless advised to do so.
1.
2.
3.
4.
5.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to DIAL MODE. Press m.
Press u or d to select TONE or PULSE.
Press m to confirm.
Press > to return to standby.
Temporarily switch from Pulse to Tone dialling
1. Press and hold *.
The dial mode will change from Pulse to Tone for the duration of the call.
Call barring
Prevent certain numbers from being dialled from your D1000. Store up to four specific numbers,
each up to 4 digits – for example, international or local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
EN
8. Advanced settings
Press m, scroll d to ADVANCED SET and press m.
Scroll d to EASY CALL. Press m.
Enter the master PIN (default setting 0000) and press m.
MODE is displayed. Press m then press u or d to select ON or OFF. Press m to confirm.
5. Press > to return to standby.
NOTE
If you switch Easy call on, EASY CALL ON will be displayed on your screen in standby mode.
To switch Easy call off again:
1. Press >.
2. OFF? is displayed. Press m to confirm.
Set the easy call number
1.
2.
3.
4.
5.
6.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to EASY CALL. Press m.
Enter the master PIN (Default setting 0000) and press m.
Scroll d to NUMBER. Press m.
Enter the number. Press m to confirm
Press > to return to standby.
If you switch Call barring on, BARR MODE ON will be displayed on your screen in standby mode.
Dial an easy number
Switch call barring on/off
When an easy call number has been stored and the easy call setting switched on, press any key
(apart from >), to dial a number.
1.
2.
3.
4.
5.
6.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to CALL BARRING. Press m.
Enter the master PIN (default setting 0000) and press m.
MODE is displayed. Press m.
Press u or d to select ON or OFF. Press m to confirm.
Press > to return to standby. You can now set the number
(See below).
Advanced settings
NOTE
When easy call is switched on, you can still answer any incoming call as normal.
17
Registration
PIN
Up to 5 handsets can be registered to one base station. Additional handsets must be registered
to the base before you can use them.
The 4-digit master PIN is used when registering or unregistering a handset and when changing
some settings on your D1000. The default setting is 0000. You can change this PIN for more
security.
• The instructions described below apply specifically to your D1000 handset. If you wish to
register another manufacturer’s handset, the instructions may vary. In this case, please refer to
the manufacturer of the additional handset.
• The Master PIN is required before you can register or unregister handsets. The default PIN is
0000.
1.
2.
3.
4.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to PIN. Press m.
Enter the current 4 digit master PIN and press m. (Default setting 0000).
Enter the new PIN and press m.
Register a handset
NOTE
At the base:
1. Press and hold the p button on the base station for at least 3 seconds. The base station
emits a beep when it is ready to accept registration. You have 90 seconds in which to register
a handset.
Reset
At the handset:
1. Press m and scroll d to ADVANCED SET and press m.
2. Scroll d to REGISTRATION and press m.
3. If necessary, scroll u or d to display REGIST. BASE and press m. BASE 1 2 3 4 is displayed and
the registered base number is flashing. Enter the number of the base on which you wish to
register your handset.
If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
Make a note of your PIN. If you forget your PIN you will need to reset your product.
This will reset your D1000 to its default settings.
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to RESET UNIT. Press m.
3. CONFIRM? is displayed. Press m.
NOTE
Entries stored in the phonebook are retained. After reset, depending on your country, the welcome
mode setting may be shown on the handset display.
Default settings
4. When the display shows PIN----, enter the base PIN.
- When the handset registers with the base, it is assigned a handset number.
Handset name
Key tone
On
Select a base
First ring
On
You can register your D1000 handset with up to 4 bases. Once registered, you can switch
between bases, for example, bases at home and at work.
Auto pick up
On
Auto hang up
On
1. Press m and scroll d to ADVANCED SET and press m.
2. Scroll d to REGISTRATION and press m.
3. SELECT BASE is displayed. Press m.
- The available bases are displayed with the current base number flashing.
4. Enter the number of the base you want – 1,2,3 or 4 and press m.
- When the base is found you hear a beep. If not found, the display shows UNREGISTERED.
Unregister a handset
1. Press m and scroll d to ADVANCED SET and press m.
2. Scroll d to UNREGISTER and press m.
3. Enter the 4 digit master PIN and press m.
- Display shows the registered handset numbers.
4. Scroll u or d to select the handset you want to delete and press m.
- UNREGISTERED is displayed on the handset screen.
18
Handset
Ringer melody
Melody 1
Ringer volume
High
Earpiece volume
3
Phonebook
Unchanged
Call log
Empty
Redial list
Empty
Master PIN
0000
Keypad lock
Off
Clock
00:00
Alarm
Off
Dial mode
Tone
Advanced settings
ECO mode
You can set the D1000 to detect a dialling number and replace it with another number. The
number to be detected can be up to 5 digits long. It can be replaced with a number up to 10 digits.
To reduce the level of power emissions, you can select low power or ECO mode. When the ECO
mode is set to ON, the base transmission power will be reduced.
1.
2.
3.
4.
5.
6.
7.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to PREFIX. Press m.
DETECT DIGIT is displayed. Press m.
Enter the number you want to be detected and press m.
Scroll to PREFIX NUM. and press m.
Enter the number you want it replaced with and press m.
Press > to return to standby.
Country
To turn ECO Mode to ON or OFF:
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to ECO MODE and press m.
3. Press u or d to highlight ON or OFF then press m to confirm.
- A confirmation beep is emitted and the handset display will switch between the handset’s
name and ECO MODE.
NOTE
When Eco Mode is set to ON, the handset range will be reduced.
If you move to another country you can set your phone to be compatible with the network settings
of that country.
NOTE
If you make a mistake during welcome mode country selection, you can also reset your country.
Depending on your country, this option may be displayed as NOT AVAIL or you country may not be
displayed.
1.
2.
3.
4.
5.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to SEL. COUNTRY. Press m.
Enter the 4-digit master PIN and press m.
Scroll u or d to display the required country.
Press m to confirm.
Intrusion
When an external call is taking place, another handset registered to the base can join in, making
the call a 3-way conference, just by pressing <.
To enable this, Intrusion must be switched On.
1.
2.
3.
4.
5.
Press m, scroll d to ADVANCED SET and press m.
Scroll d to INTRUSION. Press m.
Scroll u or d to ON or OFF.
Press m to confirm.
Press > to return to standby.
Advanced settings
19
EN
Auto prefix
9. Help
Charging
Interference
Noise interference on your radio or television
Your base or charger may be too close. Move it as far away as possible.
The
icon is not scrolling when the handset is placed on the base
• Bad battery contact – move the handset slightly
• Dirty contact – Clean the battery contact with a cloth moistened with alcohol
• Battery is full – no need to charge
Calls
No dialling tone
• No power – check the connections. Reset the phone: unplug and plug back in the mains
• Batteries are empty – charge the batteries for at least 24 hours
• You are too far from the base – move closer to the base
• Wrong line cable – use the line cable provided
• Line adaptor (when needed) is not connected to the line cord – connect the line adaptor (when
needed) to the line cord
Poor audio quality
The base is too close to electrical appliances, reinforced concrete walls or metal doorframes –
move the base at least one metre away from any electrical appliances
icon is blinking
The
• Handset is not registered to the base – register the handset to the base
• You are too far from the base – move closer to the base
No ring tone
• The ring tone is deactivated.
• Increase the volume.
Caller Line Identification (CLI) service does not work
Check your subscription with your network operator
Phonebook
A phonebook entry cannot be stored
The phonebook is full. Delete an entry to free memory
Display
No display
• Try recharging or replacing the batteries.
• Try disconnecting and connecting the base power supply.
• If LED is not lit up, then try disconnecting and connecting the base power supply.
Registration
Unable to register another handset
• Maximum number of 5 handsets has been reached.
• The display shows SEARCHING. You must unregister a handset in order to register a new one.
20
Help
IMPORTANT
This equipment is not designed for making emergency telephone calls when the power fails.
Alternative arrangements should be made for access to emergency services.
This product is intended for connection to analogue public switched telephone networks and
private switchboards in Vietnam.
Important safety instructions
Follow these safety precautions when using your phone to reduce the risk of fire, electric shock,
and injury to persons or property:
1. Keep all slits and openings of the phone unblocked. Do not set the phone on a heating
register or over a radiator. Ensure that proper ventilation is provided at the installation site.
2. Do not use while wet or while standing in water.
3. Do not use this product near water (for example, near a bath tub, kitchen sink, or swimming
pool).
4. Do not allow anything to rest on the power cord. Place the power cord so that it will not be
walked on.
5. Never insert objects of any kind into the product vents as that may result in fire or electric
shock.
6. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
7. Do not disassemble this product. If service or repair work is required, contact the customer
service helpline found in this user's Guide.
8. Do not overload wall outlets and extension cords.
9. Avoid using during an electrical storm. Use a surge protector to protect the equipment.
10. Do not use this phone to report a gas leak, especially if you are in the vicinity of the gas line.
CAUTION
To reduce the risk of fire, use only the supplied power adaptor.
Unplug this cordless phone immediately from an outlet if:
• The power cord or plug is damaged or frayed.
• Liquid has been spilled on the product.
• The product has been exposed to rain or water. Do not retrieve the handset or base until after
you have unplugged the power and phone from the wall. Then retrieve the unit by the
unplugged cords.
• The product has been dropped or the cabinet has been damaged.
• The product exhibits a distinct change in performance.
Installation Guidelines
1.
2.
3.
4.
Read and understand all instructions and save them for future reference.
Follow all warnings and instructions marked on the product.
Do not install this product near a bath tub, sink, or shower.
Operate this phone using only the power source that is indicated on the marking label. If you are
unsure of the power supply to your home, consult with your dealer or local power company.
5. Do not place this product on an unstable cart, stand, or table. This product may fall, causing
serious damage to the product.
General information
6. Adjust only those controls that are covered by the operating instructions. Improper adjustment
of other controls may result in damage and will often require extensive work to restore the
product to normal operation.
7. Clean this product with a soft, damp cloth. Do not use chemicals or cleaning agents to clean
this phone.
8. Use only the power supply that came with this unit. Using other power supplies may damage
the unit.
9. Because this phone operates on electricity, you should have at least one phone in your home
that could operate without electricity in the case the power in your home goes out.
10. To avoid interference to nearby appliances, do not place the base of the phone on or near a
TV, microwave oven, or VCR.
Battery Safety Instructions
• Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic
materials that could be released, resulting in injury.
CAUTION
• There is a risk of explosion if you replace the battery with an incorrect battery type. Use only
the battery pack that came with your phone or an authorized replacement recommended by
the manufacturer.
• Keep battery packs out of the reach of children.
• Remove battery packs if storing over 30 days.
• Do not dispose of battery packs in fire, which could result in explosion.
• The rechargeable battery packs that power this product must be disposed of properly and may
need to be recycled. Refer to your battery’s label for battery type. Contact your local recycling
center for proper disposal methods.
SAVE THESE INSTRUCTIONS
Cleaning
• Clean the handset and base (or charger) with a damp (not wet) cloth, or an anti-static wipe.
• Never use household polish as this will damage the product. Never use a dry cloth as this may
cause a static shock.
Environmental
• Do not expose to direct sunlight.
• The handset may become warm when the batteries are being charged or during prolonged
periods of use. This is normal. However, we recommend that to avoid damage you do not
place the product on antique/veneered wood.
• Do not stand your product on carpets or other surfaces which generate fibres, or place it in
locations preventing the free flow of air over its surfaces.
• Do not submerge any part of your product in water and do not use it in damp or humid
conditions, such as bathrooms.
• Do not expose your product to fire, explosive or other hazardous conditions.
• There is a slight chance your phone could be damaged by an electrical storm. We recommend
that you unplug the power and telephone line cord during an electrical storm.
21
EN
10. General information
Product disposal instructions
Product disposal instructions for residential users
When you have no further use for it, please remove any batteries and dispose of them and the
product per your local authority’s recycling processes. For more information please contact your
local authority or the retailer where the product was purchased.
Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages,
or limitation on the length of an implied warranty, so the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights that
vary from one jurisdiction to another.
Thank you for purchasing this Motorola branded product manufactured under license by Suncorp
Technologies Limited, 3001-3005 China Resources Building, 26 Harbour Road, Wan Chai, Hong
Kong. ("Suncorp")
Length of Coverage
One (1) year from the date of the products original
purchase by the first consumer purchaser of the product.
Consumer Accessories (battery,
Ninety (90) days from the date of the accessories
power supply(s) and line cords)
original purchase by the first consumer purchaser of
the product.
Consumer Products and Accessories The balance of the original warranty or for ninety
that are Repaired or Replaced
(90) days from the date returned to the consumer,
whichever is longer.
What Does this Warranty Cover?
Exclusions
Product disposal instructions for business users
Business users should contact their suppliers and check the terms and conditions of the purchase
contract and ensure that this product is not mixed with other commercial waste for disposal.
Consumer Products and Accessories Warranty
Subject to the exclusions contained below, SUNCORP TECHNOLOGIES LTD. warrants that this
Motorola branded product ("Product") or certified accessory ("Accessory") sold for use with this
product that it manufactured to be free from defects in materials and workmanship under normal
consumer usage for the period outlined below. This Limited Warranty is your exclusive warranty
and is not transferable.
Who is covered?
This warranty extends only to the first consumer purchaser, and is not transferable.
What will SUNCORP TECHNOLOGIES LTD do?
SUNCORP TECHNOLOGIES LTD or its authorized distributor at its option and within a
commercially reasonable time, will at no charge repair or replace any Products or Accessories that
does not conform to this limited warranty. We may use functionally equivalent reconditioned/
refurbished/ pre-owned or new Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE
REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS
THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR SUNCORP
TECHNOLOGIES LTD BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT
OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS
OF INFORMATION OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE
FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
22
Products Covered
Consumer Products
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal
wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories
for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions;
or (d) other acts which are not the fault of Motorola or SUNCORP TECHNOLOGIES LTD., are
excluded from coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified Products or Accessories or other peripheral
equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing,
adjustment, installation, maintenance, alteration, or modification in any way by someone other
than Motorola, SUNCORP TECHNOLOGIES LTD. or its authorized service centers, are excluded
from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c)
mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or
parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories due to
any communication service or signal you may subscribe to or use with the Products or
Accessories is excluded from coverage.
General information
To obtain service or information, please call: +852 2185 1305.
Email: INFO@USTEL.COM.HK
You will receive instructions on how to ship the Products or Accessories at your expense, to
SUNCORP TECHNOLOGIES LTD. It is the responsibility of the purchaser to contact the nearest
authorised service center/distributor and bring the product at the purchaser's risk to that
authorised service center.
Authorized Repair Center
11. Wall mounting
EN
How to Obtain Warranty Service or Other Information?
IMPORTANT
Before you wall-mount your D1000, check that you are not drilling into any hidden wiring or pipes.
Before you drill, make sure the power and telephone line cables will reach the sockets.
1. Use the following templates to mark the drilling locations.
• To wall-mount the base, drill two holes in the wall 4.5cm apart horizontally using an 8mm drill
bit.
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof of purchase
(receipt) which includes the date, place and seller of the Product; (c) if a warranty card was included
in your box, a completed warranty card showing the serial number of the Product; (d) a written
description of the problem; and, most importantly; (e) your address and telephone number.
Technical Information
How many telephones can I have?
All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to
calculate the number of items which may be connected to any one telephone line. Your D1000 has a
REN of 1. A total REN of 4 is allowed. If the total REN of 4 is exceeded, the telephones may not ring.
With different telephone types there is no guarantee of ringing, even when the REN is less than 4.
Any additional handsets and chargers that you register have a REN of 0.
R&TTE
This product is intended for use within Vietnam for connection to the public telephone network and
compatible switchboards.
This equipment complies with the essential requirements for the Radio Equipment and
Telecommunications Terminal Equipment Directive 1999/5/EC including compliance with ICNIRP
standard for electromagnetic energy exposure.
Connecting to a switchboard
• To wall-mount the charger, drill two holes in the wall 3.2cm apart horizontally using an 8mm drill
bit.
This product is intended for use within Vietnam for connection to the public telephone network.
Inserting a pause
With some switchboards, after dialling the access code you may have to wait for a moment while
the switchboard picks up an outside line so you will need to enter a pause in the dialing sequence.
Press and hold # to insert a pause (P) before entering the telephone number.
You may also need to enter a pause when storing international numbers or charge card numbers.
Recall
You may need to use the recall function if you are connected to a switchboard/PABX (Private
Automatic Branch Exchange), contact your PABX supplier for further information.
Wall mounting
23
2. Insert the wall plugs if necessary, then insert the screws leaving about 5mm protruding from
the wall on which to hang the phone.
3. Pull the base/charger out of the stand and slot the holes on the back of the base over the
screw heads and gently pull the base/charger down to make sure it is securely in place.
24
Wall mounting
Declaration of Conformity (DoC)
Motorola
D1001, D1002, D1003, D1004, D1011, D1012, D1013 and D1014
DECT phone without telephone answering machine (D100x) and
with telephone answering machine (D101x),
Suncorp declares that the following products:
Brandname:
Type:
Descriptions:
and their multi-handset versions.
R&TTE Directive (1999/5/EC)
Ecodesign Directive (2005/32/EC)
to which this declaration related is in conformity with the essential requirements of the following
directives of the Council of the European Communities:
-
Safety:
EN301489-1 v1.6.1 and EN301489-6 v1.2.1
EN301406 v1.5.1
EC No 278/2009, 6 April 2009
EN60950-1:2006
The products are compliant with the following standards:
EMC:
RF Spectrum:
Ecodesign:
3rd May 2010
3001-3005 China Resources Building, 26 Harbour Road,
Wan Chai, Hong Kong
CW Cheung - Chief Technical Officer
______________________
For and on behalf of Suncorp Global Limited,
Signature:
Printed name & Position:
Date:
Place:
Wall mounting
25
Manufactured, distributed or sold by Suncorp
Technologies Ltd. official licensee for this product.
MOTOROLA and the Stylized M Logo, and other
Motorola trademarks and trade dress are owned by
Motorola, Inc. and are used under license from
Motorola, Inc. MOTOROLA and the Stylized M Logo
are registered in the US Patent & Trademark Office.
All other product or service names are the property
of their respective owners.
© Motorola, Inc. 2010. All rights reserved.
Version 1 (VN)