Samsung HT-D330 Operating instructions

XV-HDT330_new.book 1 ページ 2003年1月16日 木曜日 午後4時12分
00
DVD/CD Receiver
XV-HTD330
Speaker System
S-HTD330
Operating Instructions
1
En
XV-HDT330_new.book 2 ページ 2003年1月16日 木曜日 午後4時12分
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of uninsulated
“dangerous voltage” within the
product's enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION:
TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important
operating
and
maintenance
(servicing)
instructions in the literature
accompanying the appliance.
H002_En
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS — All the safety and
operating instructions should be read before
the product is operated.
RETAIN INSTRUCTIONS — The safety and
operating instructions should be retained for
future reference.
HEED WARNINGS — All warnings on the
product and in the operating instructions should
be adhered to.
FOLLOW INSTRUCTIONS — All operating and
use instructions should be followed.
CLEANING — Unplug this product from the wall
outlet before cleaning. The product should be
cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzine,
insecticides or other volatile liquids since they
may corrode the cabinet.
ATTACHMENTS — Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
WATER AND MOISTURE — Do not use this
product near water — for example, near a
bathtub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming
pool; and the like.
ACCESSORIES — Do not place this product on
an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer’s instructions, and should use a
mounting accessory recommended by the
manufacturer.
CART — A product and cart
combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause the
product and cart combination to
overturn.
VENTILATION — Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and to
protect it from overheating, and these openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
manufacturer’s instructions have been adhered
to.
POWER SOURCES — This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
LOCATION – The appliance should be installed
in a stable location.
NONUSE PERIODS – The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
GROUNDING OR POLARIZATION
• If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
• If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding type plug.
XV-HDT330_new.book 3 ページ 2003年1月16日 木曜日 午後4時12分
POWER-CORD PROTECTION — Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
OUTDOOR ANTENNA GROUNDING — If an
outside antenna or cable system is connected
to the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to
grounding electrodes, and requirements for the
grounding electrode. See Figure A.
LIGHTNING — For added protection for this
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the product due to
lightning and power-line surges.
POWER LINES — An outside antenna system
should not be located in the vicinity of
overhead power lines or other electric light or
power circuits, or where it can fall into such
power lines or circuits. When installing an
outside antenna system, extreme care should
be taken to keep from touching such power
lines or circuits as contact with them might be
fatal.
OVERLOADING — Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
OBJECT AND LIQUID ENTRY — Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the product.
SERVICING — Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
DAMAGE REQUIRING SERVICE — Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
• When the power-supply cord or plug is
damaged.
• If liquid has been spilled, or objects have fallen
into the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
• If the product has been dropped or damaged in
any way.
• When the product exhibits a distinct change in
performance — this indicates a need for
service.
REPLACEMENT PARTS — When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or have the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
SAFETY CHECK — Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks to
determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING — The product
should not be mounted to a wall or ceiling.
HEAT — The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
ELECTRIC
SERVICE
EQUIPMENT
Fig. A
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC — NATIONAL ELECTRICAL CODE
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
H001_En
[For U.S. model]
IMPORTANT NOTICE
The serial number for this equipment is located
on the rear panel. Please write this serial
number on your enclosed warranty card and
keep it in a secure area. This is for your security.
H006A_En
XV-HDT330_new.book 4 ページ 2003年1月16日 木曜日 午後4時12分
NOTE: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/
H010_En
TV technician for help.
Information to User
Alteration or modifications carried out without
appropriate authorization may invalidate the
user's right to operate the equipment. H011_En
CAUTION
• Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
• The use of optical instruments with this
H013_En
product will increase eye hazard.
This product includes FontAvenue® fonts
licenced by NEC corporation. FontAvenue is
a registered trademark of NEC Corporation.
WARNING:
Handling the power cord on this product or
cords associated with accessories sold with
the product will expoes you to lead, a chemical
known to the State of California and other
governmental entities to cause cancer and
birth defects or other reproductive harm.
Wash hands after handling.
[For Canadian model]
CAUTION: TO PREVENT ELECTRIC SHOCK, DO
NOT USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
ATTENTION: POUR PREVENIR LES CHOCS
ELECTRIQUES NE PAS UTILISER CETTE FICHE
POLARISEE AVEC UN PROLONGATEUR UNE
PRISE DE COURANT OU UNE AUTRE SORTIE
DE COURANT, SAUF SI LES LAMES PEUVENT
ETRE INSEREES A FOND SANS EN LAISSER
H007A_2L
AUCUNE PARTIE A DECOUVERT.
[For Canadian model]
This Class B digital apparatus complies with
Canadian ICES-003.
[Pour le modèle Canadien]
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
H009_2L
[For U.S. model]
ENERGY STAR® and the
ENERGY STAR
certification mark are
registered US marks.
K001C_En
Energy-saving design
This system is designed to use 0.39W of
electricity when power is switched to
standby.
This product is for general household purposes.
Any failure due to use for other than household
purposes (such as long-term use for business
purposes in a restaurant or use in a car or ship)
and which requires repair will be charged for
K041_En
even during the warranty period.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
XV-HDT330_new.book 5 ページ 2003年1月16日 木曜日 午後4時12分
Thank you for buying this Pioneer product.
Please read through these operating instructions so that you will know how to operate your
model properly. After you have finished reading the instructions, put them in a safe place for
future reference.
Contents
01 Before you start
03 Controls and displays
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
What’s in the box . . . . . . . . . . . . . . . . . . . . 9
Putting the batteries in the remote
control. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Using the remote control . . . . . . . . . . . . . 9
Disc / content format playback
compatibility . . . . . . . . . . . . . . . . . . . . . . 10
General disc compatibility . . . . . . . . . . . 10
CD-R/RW compatibility . . . . . . . . . . . . . 10
DVD-R/RW compatibility . . . . . . . . . . . . 10
PC-created disc compatibility . . . . . . . . 11
About WMA . . . . . . . . . . . . . . . . . . . . . . 11
Compressed audio compatibility . . . . . . 11
JPEG file compatibility . . . . . . . . . . . . . . 12
Front panel . . . . . . . . . . . . . . . . . . . . . . . . 20
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Remote control . . . . . . . . . . . . . . . . . . . . . 23
02 Connecting up
Connecting the speakers . . . . . . . . . . . . .
Placing the speakers . . . . . . . . . . . . . . . .
Wall-mounting the center and surround
speaker system . . . . . . . . . . . . . . . . . . .
Connecting to your TV . . . . . . . . . . . . . . .
Connecting using the S-video output . . .
Connecting using the component video
output . . . . . . . . . . . . . . . . . . . . . . . . . .
Listening to TV audio through this
system . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting the supplied antennas . . . . . .
Assembling the loop antenna . . . . . . . .
AM loop antenna . . . . . . . . . . . . . . . . . .
FM wire antenna . . . . . . . . . . . . . . . . . .
Connecting the power . . . . . . . . . . . . . . .
13
14
15
16
16
17
17
18
18
18
19
19
04 Getting started
Switching on and setting up . . . . . . . . . . . 26
Setting the clock . . . . . . . . . . . . . . . . . . . 27
Using the Room Setup . . . . . . . . . . . . . . . 27
Using the on-screen displays . . . . . . . . . . . 28
Playing discs . . . . . . . . . . . . . . . . . . . . . . . 29
Basic playback controls . . . . . . . . . . . . . 30
Resume and Last Memory . . . . . . . . . . . 31
Changing discs . . . . . . . . . . . . . . . . . . . . . 32
DVD-Video disc menus . . . . . . . . . . . . . . . 33
Video CD PBC menus . . . . . . . . . . . . . . . . 34
Listening to the radio. . . . . . . . . . . . . . . . . 34
Improving poor FM reception . . . . . . . . . 35
Memorizing stations . . . . . . . . . . . . . . . . 35
Listening to station presets . . . . . . . . . . . 35
Listening to other sources . . . . . . . . . . . . . 36
05 Home theater sound
Auto listening mode . . . . . . . . . . . . . . . . . 37
Listening in surround sound . . . . . . . . . . . 37
Dolby Pro Logic II Music settings . . . . . . 38
Listening in stereo . . . . . . . . . . . . . . . . . . . 38
Listening with headphones . . . . . . . . . . . . 38
Using the Advanced Surround effects . . . . 39
Adjusting the Advanced Surround effect
level . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5
En
XV-HDT330_new.book 6 ページ 2003年1月16日 木曜日 午後4時12分
Enhancing dialogue . . . . . . . . . . . . . . . . .
Listening with a virtual surround back
speaker . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Quiet and Midnight listening
modes . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the bass and treble. . . . . . . . . .
Boosting the bass level . . . . . . . . . . . . . .
Muting the sound . . . . . . . . . . . . . . . . . . .
40
08 Using the timer
40
Setting the wake-up timer . . . . . . . . . . . . . 58
Turning the wake-up timer on/off . . . . . . 59
Setting the sleep timer . . . . . . . . . . . . . . . 59
40
41
41
41
09 Surround sound setup
42
10 Video Adjust menu
42
Video Adjust . . . . . . . . . . . . . . . . . . . . . . . 64
Creating your own presets. . . . . . . . . . . . 64
06 Playing audio and video discs
Introduction . . . . . . . . . . . . . . . . . . . . . . .
Playing only CDs, MP3 and WMA discs
(CD mode) . . . . . . . . . . . . . . . . . . . . . . . .
Using the Disc Navigator to browse the
contents of a disc . . . . . . . . . . . . . . . . . . .
Scanning discs . . . . . . . . . . . . . . . . . . . .
Playing in slow motion . . . . . . . . . . . . . . .
Frame advance/frame reverse . . . . . . . . .
Looping a section of a disc . . . . . . . . . . . .
Using repeat play . . . . . . . . . . . . . . . . . . .
Using random play . . . . . . . . . . . . . . . . . .
Creating and editing a DVD program
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating and editing a non-DVD program
list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Other functions available from the
program menu . . . . . . . . . . . . . . . . . . . .
Searching a disc . . . . . . . . . . . . . . . . . . .
Switching DVD audio language . . . . . . . .
Switching subtitles . . . . . . . . . . . . . . . . . .
Switching audio channel when playing a
Video CD . . . . . . . . . . . . . . . . . . . . . . . . .
Zooming the screen . . . . . . . . . . . . . . . . .
Switching camera angles . . . . . . . . . . . . .
Displaying disc information . . . . . . . . . . .
Front panel display information . . . . . . .
42
44
44
44
45
45
46
47
49
50
51
51
52
52
52
53
53
54
07 Viewing JPEG discs
Playing a JPEG slideshow . . . . . . . . . . . . 55
Using the JPEG Disc Navigator and Photo
Browser . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Zooming the screen . . . . . . . . . . . . . . . . . 56
6
En
Setting up surround sound . . . . . . . . . . . . 61
System Setup menu options . . . . . . . . . . 61
Setting the channel levels . . . . . . . . . . . . 62
11 Initial Settings menu
Using the Initial Settings menu . . . . . . . . . 66
Video Output settings . . . . . . . . . . . . . . . . 66
TV Screen . . . . . . . . . . . . . . . . . . . . . . . . 66
Component Out . . . . . . . . . . . . . . . . . . . 67
S-Video Out . . . . . . . . . . . . . . . . . . . . . . . 68
Language settings . . . . . . . . . . . . . . . . . . . 68
Audio Language . . . . . . . . . . . . . . . . . . . 68
Subtitle Language . . . . . . . . . . . . . . . . . . 68
DVD Menu Language . . . . . . . . . . . . . . . 69
Subtitle Display . . . . . . . . . . . . . . . . . . . . 69
Display settings . . . . . . . . . . . . . . . . . . . . . 69
OSD Language . . . . . . . . . . . . . . . . . . . . 69
On Screen Display . . . . . . . . . . . . . . . . . 69
Angle Indicator . . . . . . . . . . . . . . . . . . . . 70
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Parental Lock . . . . . . . . . . . . . . . . . . . . . 70
PhotoViewer . . . . . . . . . . . . . . . . . . . . . . . 72
12 Additional information
Switching off the demo . . . . . . . . . . . . . . . 73
Child Lock . . . . . . . . . . . . . . . . . . . . . . . . . 73
Changing the clock format . . . . . . . . . . . . 73
Changing the frequency step. . . . . . . . . . . 73
Resetting the system . . . . . . . . . . . . . . . . . 74
XV-HDT330_new.book 7 ページ 2003年1月16日 木曜日 午後4時12分
Using and taking care of discs . . . . . . . . .
Titles, chapters and tracks . . . . . . . . . . .
DVD Video regions . . . . . . . . . . . . . . . . .
Handling discs. . . . . . . . . . . . . . . . . . . .
Storing discs . . . . . . . . . . . . . . . . . . . . .
Discs to avoid . . . . . . . . . . . . . . . . . . . .
Proper installation and maintenance of
this system . . . . . . . . . . . . . . . . . . . . . . . .
Hints on installation. . . . . . . . . . . . . . . .
Cleaning the pickup lens . . . . . . . . . . . .
Problems with condensation . . . . . . . . .
Moving the system unit . . . . . . . . . . . . .
Power cable caution . . . . . . . . . . . . . . .
Connecting external antennas . . . . . . . . .
Connecting auxiliary components . . . . . .
Reducing the TV and line signal levels . .
Recording mode . . . . . . . . . . . . . . . . . .
74
74
74
74
75
75
75
75
76
76
76
76
77
77
78
78
Troubleshooting . . . . . . . . . . . . . . . . . . . . 79
General . . . . . . . . . . . . . . . . . . . . . . . . . . 79
DVD/CD/Video CD player . . . . . . . . . . . . 80
WMA/MP3/JPEG discs . . . . . . . . . . . . . . 81
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Error Messages . . . . . . . . . . . . . . . . . . . . 82
Screen sizes and disc formats . . . . . . . . . . 83
Widescreen TV users . . . . . . . . . . . . . . . . 83
Standard TV users . . . . . . . . . . . . . . . . . . 83
Selecting languages using the language
code list . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Language code list . . . . . . . . . . . . . . . . . . 84
Country code list . . . . . . . . . . . . . . . . . . . . 84
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Specifications . . . . . . . . . . . . . . . . . . . . . . 87
7
En
XV-HDT330_new.book 8 ページ 2003年1月16日 木曜日 午後4時12分
01
Before you start
Chapter 1
Before you start
Features
Picture zoom
24-bit/96kHz compatible DAC
While a DVD or Video CD is playing, you can
zoom in on any part of the picture at up to 4x
magnification for a closer look. See Zooming
the screen on page 52.
This system is fully compatible with high
sampling-rate discs, capable of delivering
better-than-CD sound quality in terms of
dynamic range, low-level resolution and highfrequency detail.
Dolby Digital, Dolby Pro Logic II*1 and
DTS*2
MP3 and WMA compatibility
This system is compatible with CD-R, CD-RW
and CD-ROM discs that contain MP3 or WMA
audio tracks. See also Compressed audio
compatibility on page 11.
Graphical on-screen displays
Built-in Dolby Digital and DTS decoders let
you enjoy true discrete multichannel home
theater sound with Dolby Digital and DTS
encoded DVD discs.
Dolby Pro Logic and Dolby Pro Logic II
decoding adds excitement to two-channel
source material with surround sound
playback.
PureCinema progressive scan
When connected to a progressive scancompatible TV or monitor using the
component video outputs, you can enjoy
extremely stable, flicker free images, with the
same frame refresh rate as the original movie.
8
En
Setting up and using your DVD home theater
system is made very easy using the graphical
on-screen displays.
*1 Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic” and the
double-D symbol are trademarks of Dolby
Laboratories.
*2 “DTS” and “DTS Digital Surround” are
registered trademarks of Digital Theater
Systems, Inc.
XV-HDT330_new.book 9 ページ 2003年1月16日 木曜日 午後4時12分
01
Before you start
What’s in the box
3
Close the cover.
Please confirm that the following accessories
are in the main system box when you open it.
• Remote control
• AA/R6P dry cell batteries (x2)
• Video cable (yellow plugs)
• AM loop antenna
• FM wire antenna
• Power cable
• These operating instructions
• Warranty card
Please confirm that the following accessories
are in the speaker box when you open it.
• Speaker cables (x6)
• non-skid pads for speakers (1 sheet)
Incorrect use of batteries can result in
hazards such as leakage and bursting. Please
observe the following:
• Don’t mix new and old batteries together.
• Don’t use different kinds of battery
together—although they may look similar,
different batteries may have different
voltages.
Putting the batteries in the
remote control
• Make sure that the plus and minus ends
of each battery match the indications in
the battery compartment.
1 Open the battery compartment cover
on the back of the remote control.
• Remove batteries from equipment that
isn’t going to be used for a month or
more.
• When disposing of used batteries, please
comply with governmental regulations or
environmental public instruction’s rules
that apply in your country or area.
H048 En
2 Insert two AA/R6P batteries into the
battery compartment following the
indications (, ) inside the
compartment.
Using the remote control
Keep in mind the following when using the
remote control:
• Make sure that there are no obstacles
between the remote and the remote
sensor on the system unit.
• The remote has a range of about 23 ft. /
7 m at an angle of less than 30º.
• Remote operation may become unreliable
if strong sunlight or fluorescent light is
shining on the system unit’s remote
sensor.
9
En
XV-HDT330_new.book 10 ページ 2003年1月16日 木曜日 午後4時12分
01
Before you start
• Remote controllers for different devices
can interfere with each other. Avoid using
remotes for other equipment located
close to this system.
• Replace the batteries when you notice a
fall off in the operating range of the
remote.
Disc / content format
playback compatibility
DVD-R/RW and CD-R/RW discs (Audio CDs
and Video CDs) recorded using a DVD
recorder, CD recorder or personal computer
may not be playable on this system. This may
be caused by a number of possibilities,
including but not limited to: the type of disc
used; the type of recording; damage, dirt or
condensation on either the disc or the
player’s pick-up lens. See below for notes
about particular software and formats.
CD-R/RW compatibility
General disc compatibility
This system was designed and engineered to
be compatible with software bearing one or
more of the following logos:
DVD-Video
DVD-R
DVD-RW
• This system will play CD-R and CD-RW
discs recorded in CD Audio or Video CD
format, or as a CD-ROM containing MP3,
WMA or JPEG files. However, any other
content may cause the disc not to play, or
create noise/distortion in the output.
• This system cannot record CD-R or CDRW discs.
• Unfinalized CD-R/RW discs recorded as
CD Audio can be played, but the full Table
of Contents (playing time, etc.) will not be
displayed.
Audio CD
Video CD
CD-R
CD-RW
DVD-R/RW compatibility
Fujicolor CD
• Kodak Picture CD
•
is a trademark of Fuji Photo Film Co.
Ltd.
Other formats, including but not limited to the
following, are not playable in this system:
DVD-Audio / SACD / DVD-RAM
DVD-ROM / CD-ROM*
* Except those that contain MP3, WMA or
JPEG. See also Compressed audio
compatibility and JPEG file compatibility
below.
10
En
• This unit will play DVD-R/RW discs
recorded using the DVD-Video format that
have been finalized using a DVD recorder.
• This unit will play DVD-RW discs recorded
using the Video Recording (VR) format.
• DVD-RW shows in the display when a VR
format DVD-RW disc is loading.
• When playing a VR format DVD-RW discs
that was edited on a DVD recorder, the
screen may go momentarily black at
edited points and/or you may see scenes
from immediately before the edited point.
• This system unit cannot record DVD-R/
RW discs.
• Unfinalized DVD-R/RW discs cannot be
played in this system.
XV-HDT330_new.book 11 ページ 2003年1月16日 木曜日 午後4時12分
01
Before you start
PC-created disc compatibility
Compressed audio compatibility
• If you record a disc using a personal
computer, even if it is recorded in a
“compatible format” as listed above, there
will be cases in which the disc may not be
playable in this machine due to the
setting of the application software used to
create the disc. In these particular
instances, check with the software
publisher for more detailed information.
• This system unit will play CD-ROM, CD-R,
and CD-RW discs containing files saved
in the MPEG-1 Audio Layer 3 (MP3) or
Windows Media Audio (WMA) format
with a sampling rate of 32, 44.1 or 48kHz.
Incompatible files will not play and the
message Can’t play this format will be
displayed (NO PLAY in the front panel
display).
• Check the DVD-R/RW or CD-R/RW
software disc boxes for additional
compatibility information.
• Fixed bit-rate files are recommended.
Variable bit-rate (VBR) MP3 files are
playable, but playing time may not be
shown correctly.
About WMA
• This system is compatible with WMA data
encoded using Windows Media Player
version 8 (or less) or Windows Media
Player for Windows XP.
• This system is not compatible with
lossless-encoding or variable bit-rate
(VBR) WMA files.
The Windows Media™ logo printed on the box
indicates that this system can playback WMA
data.
WMA is short for Windows Media Audio and
refers to an audio compression technology
developed by Microsoft Corporation. WMA
data can be encoded by using Windows
Media Player version 8 (or less) or Windows
Media Player for Windows XP.
Windows Media, and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
• WMA files encoded with DRM (Digital
Rights Management) copy protection will
not play and the message Can’t play this
format will be displayed (NO PLAY in the
front panel display).
• The CD-ROM used to compile your MP3,
WMA must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
system.
• Use CD-R or CD-RW media for recording
your files. The disc must be finalized (i.e.
the session must be closed) in order to
play in this system unit. This system is not
compatible with multi-session discs. Only
the first session of a multi-session disc
will be recognized.
• This system only plays tracks that are
named with the file extension .mp3,
.MP3, .wma, or .WMA.
11
En
XV-HDT330_new.book 12 ページ 2003年1月16日 木曜日 午後4時12分
01
Before you start
• When naming MP3 and WMA files, add
the corresponding file name extension
(.mp3 or .wma). Files are played
according to the file extension. To prevent
noise and malfunctions, do not use these
extensions for other kinds of files.
• This system can recognize up to 999 files
(WMA/MP3) and up to 499 folders. If a
disc exceeds these limits, only files and
folders up to these limits will be playable.
Files and folders are read/displayed in
alphabetical order. Note that if the file
structure is very complex, you may not be
able to read/play all the files on the disc.
• Folder and track names (excluding the file
extension) are displayed.
• There are many different recording bitrates available to encode MP3 files. This
system unit was designed to be
compatible with all of them. Audio
encoded at 128Kbps should sound close
to regular CD Audio quality. This system
will play lower bit-rate files, but please
note that the sound quality becomes
noticeably worse at lower bit-rates.
12
En
JPEG file compatibility
• Baseline JPEG and EXIF 2.1* still image
files up to 8 mega-pixels are supported
(maximum vertical and horizontal
resolution is 5120 pixels). (*File format
used by digital still cameras)
• The CD-ROM used to compile your JPEG
files must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
system.
• This system can recognize up to 999 files
(JPEG) and up to 499 folders. If a disc
exceeds these limits, only files and folders
up to these limits will be playable. Files
and folders are read/displayed in
alphabetical order. Note that if the file
structure is very complex, you may not be
able to read/play all the files on the disc.
• Folder and file names (excluding the file
extension) are displayed.
• This system only displays files that are
named with the file extension .jpg or
.JPG.
XV-HDT330_new.book 13 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
Chapter 2
Connecting up
• CAUTION: These speaker terminals can
be under HAZARDOUS VOLTAGE. When
you connect or disconnect the speaker
cables, to prevent the risk of electric
shock, do not touch uninsulated parts
before disconnecting the power cord.
• Before making or changing any rear panel
connections, make sure that all the
components are switched off and
unplugged from the power supply.
(H047 En)
Connecting the speakers
Surround right
Surround left
S-VIDEO
OUT
PB
Y
ONENT VIDEO OUT
VIDEO
OUT
SPEAKERS
FRONT
R
L
SUB
WOOFER
SURROUND
CENTER
R
L
AUDIO
Gray
COAXIAL IN
Blue
LINE 2
XV-HTD 330
Subwoofer
Green
Front right
Front left
Center
Purple
Red
White
13
En
XV-HDT330_new.book 14 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
Connect each speaker using the color-coded
speaker cable. Match them to the colored
labels above the speaker terminals.
• Do not connect any of the supplied
speakers to any other amplifier. This may
result in malfunction or fire.
This system has been designed for best
performance when connected to the
supplied speakers. We do not, therefore,
recommend that you connect and use
other speakers with this system.
1 Twist and pull off the protective
shields on each wire.
3 Connect to the speaker terminals on
the rear of the speakers in the same way.
• Remove the supplied non-skid pads from
the paper, and stick four onto the base of
each satellite speaker. Actual speakers
supplied may differ from those shown.
Placing the speakers
2 Connect to the speaker terminals on
the rear of the system unit.
Match the colored wire with the color-coded
label (above the tabs), then insert the colored
wire into the red (+) tab and the other wire
with the black (–) tab.
Where you put your speakers in the room has
a big effect on the quality of the sound. The
following guidelines should help you to get
the best sound from your system.
• The subwoofer can be placed on the floor.
Ideally, the other speakers should be at
about ear-level when you’re listening to
them. Putting the speakers on the floor
(except the subwoofer), or mounting them
very high on a wall is not recommended.
• For the best stereo effect, place the front
speakers 6–9 ft. / 2–3 m apart, at equal
distance from the TV.
• Install the center speaker above or below
the TV so that the sound of the center
channel is localized at the TV screen.
• If possible, install the surround speakers
slightly above ear level.
14
En
XV-HDT330_new.book 15 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
• The illustration below shows typical
speaker placement for a surround sound
system.
Front L
Before mounting
Front R
Subwoofer
Center
Surround L
Wall-mounting the center and
surround speaker system
Surround R
• Make sure that all speakers are securely
installed. This not only improves sound
quality, but also reduces the risk of
damage or injury resulting from speakers
being knocked over or falling in the event
of external shocks such as earthquakes.
• The front, center and surround speakers
supplied with this system are
magnetically shielded. However, placing
them extremely close to a television may
result in color distortion on the screen. If
this happens, move the speakers a little
further away and switch off the television
for 15–30 minutes.
• The subwoofer is not magnetically
shielded and so should not be placed
near a TV or monitor.
• Remember that the speaker system is
heavy and that its weight could cause the
wood screws to work loose, or the wall
material to fail to support it, resulting in
the speaker falling. Make sure that the
wall you intend to mount the speakers on
is strong enough to support them. Do not
mount on plywood or soft surface walls.
• Mounting screws are not supplied. Use
screws that are suitable for the wall
material and that will support the weight
of the speaker.
5 mm
10 mm
5 mm
Wood screw
Protrusion: 5-7mm
• If you are unsure of the qualities and
strength of the walls, consult a
professional for advice.
• Pioneer is not responsible for any
accidents or damage that result from
improper installation.
15
En
XV-HDT330_new.book 16 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
Connecting to your TV
This system has three different kinds of video
output that you can use to connect up your
TV. Check the available inputs on your TV to
see which you can use.
• Do not connect a VCR between this
system and your TV as DVD playback will
be affected.
Connecting using the S-video
output
If your TV has an S-video input, you can use
this instead of the standard video output for a
better quality picture.
• Use an S-video cable (not supplied) to
connect the S-VIDEO OUT to an S-video
input on your TV.
Line up the small triangle above the jack with
the same mark on the plug before plugging
in.
• Use the supplied video cable to
connect the VIDEO OUT jack to a video
input on your TV.
S-VIDEO
INPUT
TV
VIDEO
INPUT
TV
S
S-VIDEO
OUT
PR
PB
Y
VIDEO COMPONENT VIDEO OUT
VIDEO
OUT
S
S-VIDEO
OUT
PR
PB
Y
VIDEO COMPONENT VIDEO OUT
VIDEO
OUT
SPEAKERS
SPEAKERS
FRONT
R
L
SUB
WOOFER
FRONT
R
L
SUB
WOOFER
CENTER
CENTER
XV–HTD 330
XV–HTD 330
• Placing the system unit too close to your
TV may cause interference, especially if
you’re using an indoor antenna. If you
notice interference, move the system unit
away from the TV.
16
En
• The S-video ouptut is switchable between
S1 and S2 formats for compatibility with
all TVs. See S-Video Out on page 68 for
more on this.
XV-HDT330_new.book 17 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
Connecting using the component
video output
Listening to TV audio through this
system
If your TV has component video inputs, you
can use these instead of the standard video
output to connect this system to your TV. This
should give you the best quality picture from
the three types of video output available.
You can connect the audio output of your TV
to this system so that broadcast TV sound is
played through this system.
• Use a component video cable (not
supplied) to connect the COMPONENT
VIDEO OUT to a set of component inputs
on your TV.
• Connect a stereo audio cable (not
supplied) from the audio outputs of your
TV to the TV IN jacks on this system.
AUDIO
OUTPUT
TV
COMPONENT
INPUT
TV
S
S-VIDEO
OUT
PR
PB
Y
VIDEO COMPONENT VIDEO OUT
ANTENNA
VIDEO
OUT
AUDIO
OUT
IN
FM
UNBAL
75
IN
COAXIAL IN
LINE 2
SPEAKERS
FRONT
R
L
SUB
WOOFER
L
L
R
R
AM LOOP
ANTENNA
CENTER
LINE 1
TV
XV–HTD 330
XV–HTD 330
• The component video ouptut is
switchable between interlaced and
progressive formats. See Component Out
on page 67 for more on this.
• If you find that the TV audio is distorting
when played through this system, you can
set the input attenuator to reduce the
input signal level. See Reducing the TV and
line signal levels on page 78.
17
En
XV-HDT330_new.book 18 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
Connecting the supplied antennas
The supplied antennas provide a simple way to listen to AM and FM radio. If you find that
reception quality is poor, an outdoor antenna should give you better sound quality—see
Connecting external antennas on page 77 for more on how to do this.
FM wire antenna
AC IN
AM loop antenna
ANTENNA
AUDIO
OUT
IN
FM
UNBAL
75
IN
AL IN
LINE 2
L
L
R
R
LINE 1
AM LOOP
ANTENNA
TV
Assembling the loop antenna
AM loop antenna
1 Bend the stand in the direction
indicated.
1 Pull off the protective shields of both
AM antenna wires.
2 Press the antenna terminal tabs to
open and insert one wire into each
terminal.
3 Release the tabs to secure the AM
antenna wires.
2
18
En
Clip the loop onto the stand.
4 Place the AM antenna on a flat surface
and point in the direction giving the best
reception.
Avoid placing near computers, television sets
or other electrical appliances and do not let it
come into contact with metal objects.
XV-HDT330_new.book 19 ページ 2003年1月16日 木曜日 午後4時12分
02
Connecting up
Connecting the power
• It’s also possible to fix the AM antenna to
a wall using two screws (see illustration
below). Before fixing, make sure that the
reception is satisfactory.
Before connecting the power and switching
on for the first time make sure that everything
is connected properly.
AC IN
FM
UNBAL
75
FM wire antenna
• Connect the FM wire antenna to the
FM UNBAL 75Ω terminal in the same way
as the AM loop antenna.
For best results, extend the FM antenna fully
and fix to a wall or door frame. Don’t drape
loosely or leave coiled up.
• The signal ground () is designed to
reduce noise that occurs when an
antenna is connected. It is not an
electrical safety ground.
AM LOOP
ANTENNA
Power outlet
1 Plug one end of the supplied power
cable into the AC INLET.
2 Plug the other end into a household
power outlet.
• See Connecting auxiliary components on
page 77 for details of other connections
you can make with this system.
19
En
XV-HDT330_new.book 20 ページ 2003年1月16日 木曜日 午後4時12分
03
Controls and displays
Chapter 3
Controls and displays
Front panel
1
2
DVD
/CD
3
4
TUNER
TV/
L1/L2
5
6 7
8
DIRECT PLAY
FM/AM/ST.
1
2
3
4
5
9 10
11
DISC SKIP EXCHANGE
OPEN/CLOSE
STANDBY/ON
VOLUME
TIMER
CD MODE
DISC 1
2
3
4
5
PHONES
DOWN
20
19
18 17 16
13
12
6 Press to stop playback.
2 DVD/CD (page 29)
Press to switch to the DVD/CD function. Also
starts/pauses/resumes playback.
7 Press to start or resume playback. During
playback, press to pause; press again to
restart playback.
4 TV/L1/L2 (page 36)
Press to switch between the external sources,
TV, LINE 1 (L1) and LINE 2 (L2).
5 and Press to skip tracks/chapters; press and hold
to scan backwards/forwards.
• When in listening to the tuner, use to tune
to stations or select presets.
En
14
1 STANDBY/ON (page 26)
Press to switch the system on or into standby.
3 TUNER FM/AM/ST. (page 34)
Press to switch to the tuner function, then
between bands and station presets.
20
15
UP
8 DIRECT PLAY buttons (page 30)
Press to start playback of any disc in the
player.
9
DISC SKIP (page 29, 32)
• During playback, press to start playing the
next disc in the player.
• If the disc tray is open while no disc is
playing, the tray rotates one disc space.
• If the disc tray was opened using the
EXCHANGE button, then pressing DISC
SKIP rotates the disc tray two disc spaces.
XV-HDT330_new.book 21 ページ 2003年1月16日 木曜日 午後4時12分
03
Controls and displays
10 EXCHANGE (page 32)
Press during playback to open the disc tray
without stopping playback. Press again to
close the disc tray.
16 CD MODE indicator (page 42)
Lights when the CD Mode is on. In this mode,
the system only plays audio CDs and WMA/
MP3 discs.
11 OPEN/CLOSE
Press to open/close the disc tray.
17 Remote sensor
18 Timer indicator (page 58)
Lights when the timer is set.
12 Disc tray
13 VOLUME control
Use to adjust the volume.
19
This mark indicates compatibility with DVDRW discs recorded on a DVD recorder in
Video Recording (VR) mode.
14 DISC indicators
Shows which disc spaces are currently
occupied.
20 PHONES jack
Headphone jack.
15 Display
See Display on page 21 for detailed
information.
Display
1 2
3
4
5
MIDNIGHT QUIET
6
7
8
9
PGM
RPT -1
RDM
ATT
10 11
REC MODE
kHz
MHz
20
1
19
12
13
14
PRO LOGIC
DIGITAL
ADV.SURR.
Neo:6
PRGSVE
18 17 16 15
Tuner indicators (page 34)
2 Lights when a disc is playing.
Lights when a broadcast is being
received.
3 MIDNIGHT (page 40)
Lights when the Midnight mode is selected.
4 QUIET (page 40)
Lights when the Quiet mode is selected.
Lights when a stereo FM broadcast is
being received in auto stereo mode.
5
Lights to indicate random or repeat play of all
discs loaded.
Lights when FM mono reception is
selected.
21
En
XV-HDT330_new.book 22 ページ 2003年1月16日 木曜日 午後4時12分
03
Controls and displays
6 PGM (page 47)
Lights when a program list has been
programmed.
7 RPT and RPT-1 (page 45)
RPT lights during repeat play. RPT-1 lights
during repeat one-track play.
14 Speaker indicators
These show which speakers are being used to
output the current source. The illustrations
below show some example displays.
5.1 channel surround sound
8 RDM (page 46)
Lights during random play.
Stereo (2.1 channel) sound
9 ATT (page 78)
Lights when the input attenuator is active for
the currently selected analog input.
10 REC MODE (page 78)
Lights when Rec Mode is on.
11 Timer indicators (page 58)
3.1 channel sound with Dialogue
enhancement on the center
channel
5.1 channel surround sound with
Virtual Surround Back mode active
Lights when the timer is set
(When headphones are connected, none of
the speaker indicators are lit.)
Lights when the sleep timer is active
12 2 PRO LOGIC II (page 37)
Lights during Dolby Pro Logic decoding.
15 PRGSVE (page 67)
Lights when progressive scan video output is
selected.
13 2 DIGITAL (page 37)
Lights during playback of a Dolby Digital
source.
16 ADV.SURR (page 39)
Lights when one of the Advanced Surround
listening modes is selected.
17 DTS (page 37)
Lights during playback of a DTS source.
18 kHz / MHz
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM)
19 Character display
(page 53)
20
Lights during multi-angle scenes on a DVD
disc
22
En
XV-HDT330_new.book 23 ページ 2003年1月16日 木曜日 午後4時12分
03
Controls and displays
2 OPEN/CLOSE
Press to open/close the disc tray.
Remote control
STANDBY/ON
OPEN/CLOSE
1
2
FM/AM
3
DVD/CD
TV
LINE
DVD
AUDIO SUBTITLE ANGLE
ZOOM
5
AUTO
ROOM
SETUP
7
BASS MODE
4
SURROUND ADVANCED
VIR.SB
4
L1/L2
TUNER
DIALOGUE
3 Function select buttons
Press to select the source you want to listen to
(DVD/CD. TUNER, TV, LINE)
AUDIO (page 51)
Press to select an audio channel or
language.
6
SUBTITLE (page 52)
Press to display/change the subtitle
display.
MUTE
8
9
VOLUME
TOP MENU
SYSTEM SETUP
ANGLE (page 53)
Press to change camera angle during
DVD multi-angle scene playback.
11
10
TUNE
DVD MENU
HOME
MENU
ST
12
ST
ENTER
SOUND
MODE
RETURN
TUNE
13
15
ZOOM (page 52)
Press to change the screen zoom level.
14
QUIET/
MIDNIGHT
5
FOLDER
Surround sound mode buttons
FOLDER
AUTO (page 37)
Press to select the default decoding for
the current source.
PROGRAM REPEAT RANDOM
CLEAR
TEST TONE CH LEVEL
TIMER
DISPLAY
DIMMER
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
CD MODE
DISC SKIP
16
18
DVD buttons
ENTER
SHIFT
SURROUND (page 37)
Use to select a Surround mode.
17
ADVANCED (page 39)
Use to select an Advanced Surround
mode.
5.1ch DVD SURROUND SYSTEM
6 ROOM SETUP (page 27)
Press to start Room Setup.
7
Sound enhancement buttons
BASS MODE (page 41)
Use to select a Bass Mode.
• Functions printed in green on the remote
control are accessed using the SHIFT
button. Press the function button you
want while holding down SHIFT.
1 STANDBY/ON (page 26)
Press to switch the system on or into standby.
VIR. SB (page 40)
Press to switch the Virtual Surround Back
speaker effect on/off.
DIALOGUE (page 40)
Use to select a Dialogue mode.
23
En
XV-HDT330_new.book 24 ページ 2003年1月16日 木曜日 午後4時12分
03
Controls and displays
8 MUTE (page 41)
Press to mute all sound from the speakers
and headphones (press again to cancel).
9 VOLUME
Use to adjust the volume.
10 HOME MENU / SYSTEM SETUP
• Press to display (or exit) the on-screen
menu for Initial Settings, Play Mode
functions, etc.
• Use with SHIFT for SYSTEM SETUP: Use
to make various system and surround
sound settings. (page 61)
11 DVD MENU / TOP MENU
• Press to display a DVD-Video disc menu,
or the Disc Navigator if a VR mode DVDRW, CD, Video CD , MP3, WMA or JPEG
disc is loaded.
• Use with SHIFT for TOP MENU: Use to
display the top menu of a DVD disc in the
play position (this may be the same as
pressing DVD MENU).
12 TUNE +/–, ST +/–, cursor control
buttons and ENTER
• Use the TUNE +/– and ST +/– buttons
when listening to the radio to tune into
stations, or select preset stations.
• Use the cursor buttons (///) and
enter to navigate on-screen displays and
menus; ENTER selects an option or
executes a command.
13 SOUND MODE / QUIET/MIDNIGHT
• Use to adjust the tone and effect level.
(pages 38–41)
• Use with SHIFT for QUIET/MIDNIGHT:
Use to select the Quiet and Midnight
modes. (page 40)
14 RETURN
Press to return to a previous menu screen.
24
En
15 Playback controls
Press to start or resume playback.
and /
Use for reverse slow motion playback,
frame reverse and reverse scanning.
and /
Use for forward slow motion playback,
frame advance and forward scanning.
/ FOLDER –
Press to jump to the beginning of the
current chapter/track, then to previous
chapters/tracks.
Press SHIFT + to jump to the
beginning of the previous folder
/ FOLDER +
Press to jump to the next chapter/track (or
folder by pressing SHIFT + ).
Press to pause playback; press again to
restart.
Press to stop playback.
16 Number buttons and SHIFT functions
Use the number buttons for selecting
chapters/tracks from a disc directly; use with
the SHIFT button to access the functions
printed in green.
PROGRAM (SHIFT + 1) (page 47)
Use to program/play a program list.
REPEAT (SHIFT + 2) (page 45)
Use to select a repeat play mode.
RANDOM (SHIFT + 3) (page 46)
Use to select a random play mode.
TEST TONE (SHIFT + 4) (page 62)
Use to output the test tone (for speaker
setup).
XV-HDT330_new.book 25 ページ 2003年1月16日 木曜日 午後4時12分
03
Controls and displays
CH LEVEL (SHIFT + 5) (page 62)
Use to adjust the speaker level.
TIMER (SHIFT + 6) (page 58)
Press to display the clock and to access
the timer menu.
DISPLAY (SHIFT + 8) (page 53)
Press to display/change disc information
shown on-screen.
DIMMER (SHIFT + 9)
Press to switch between normal and
dimmed front panel display.
CLEAR
Press to clear an entry.
ENTER
Press to select menu options, etc. (works
exactly the same as the ENTER button in
12 above).
17 Disc selection buttons
DISC select buttons (page 29)
Use to select discs in the player.
DISC SKIP / CD MODE
• During playback, press to start playing the
next disc in the player.
• If the disc tray is open while no disc is
playing, the tray rotates one disc space.
• If the disc tray was opened using the
EXCHANGE button (front panel only),
then pressing DISC SKIP rotates the disc
tray two disc spaces. (page 29, 32)
• Use with SHIFT for CD MODE: Use to
switch CD Mode on/off. (page 42)
18 SHIFT
Use to access the functions/commands
printed in green on the remote (press the
button for the function you want while holding
down SHIFT).
25
En
XV-HDT330_new.book 26 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
Chapter 4
Getting started
Switching on and setting up
After making sure everything is connected up
properly, you’re ready to switch on. The first
thing to do is to tell the system what kind of TV
you’re using, standard or widescreen.
After that you can set up the surround sound
for your room, and set the clock so that you
can use the timer features.
1 Press STANDBY/ON (on the remote
or on the front panel) to switch the
system on.
Also make sure that your TV is switched on
and that the video input is set to this system.
You should see the welcome screen
displayed.
Welcome to Pioneer DVD!
Thank you for purchasing this Pioneer DVD player.
Before using, please take a little time
to setup your DVD player
Put the batteries into the remote control
STANDBY/ON
Next, press the [ENTER] button on the remote control
and start the Let's Get Started Menu
Next
ROOM
SETUP
2 Press ENTER to move on to the next
screen.
SYSTEM SETUP
ENTER
TIMER
ENTER
3 Use the / (cursor left/right)
buttons to select either ‘Wide screen’ or
‘Standard size screen’ according to the
kind of TV you have, then press ENTER.
See also Screen sizes and disc formats on
page 83 if you’re not sure which one to
choose.
Let's Get Started Menu
SHIFT
What kind of TV do you have?
Use the
/
cursor buttons
to choose, then press ENTER
Wide screen (16:9)
26
En
Standard size screen (4:3)
XV-HDT330_new.book 27 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
4
Press ENTER again to finish setting up.
Let's Get Started Menu
2 If CLOCK ADJ isn’t already shown in
the display, press or (cursor left or
right) until you see it.
3
Setup complete
4 Use the / (cursor up/down)
buttons to set the hour.
If you're finished setting up,
choose [Complete],
to start again choose [Back]
5
Complete
Press ENTER.
Back
• Use the (cursor right) button to select
BACK then press ENTER if you want to go
back and change the setting you just
made.
Press ENTER.
6 Use the / (cursor up/down)
buttons to set the minute.
7 Press ENTER to confirm.
The display flashes to indicate the clock is set.
• Press TIMER (SHIFT + 6) anytime to
display the clock.
• You can also use the OPEN/CLOSE
button on the front panel or the function
buttons (DVD/CD, TUNER, etc.) to switch
the system on from standby.
• The system switches on, but there is
nothing displayed on my TV.
Make sure that the TV is set to the correct
video input (not a TV channel). For
example, if you connected this system to
the VIDEO 1 input on your TV, switch your
TV to VIDEO 1.
Setting the clock
Setting the clock allows you to use the timer
features.
1
Press TIMER (SHIFT + 6).
• If you are adjusting the clock, rather then
setting it for the first time, press TIMER
(SHIFT + 6) again.
• If you unplug the system from the wall
outlet, or there is a power outage, you will
need to set the clock again.
Using the Room Setup
Before using your DVD system to enjoy
surround sound playback, we recommend
you spend a few minutes using the Room
Setup. This is a quick and easy way to get
good surround sound for your room.
Depending on the distance of the surround
speakers from your main listening position,
choose between S (small), M (medium), or L
(large) room, then depending on your seating
position relative to the front and surround
speakers, choose Fwd (forward), Mid, or
Back.
27
En
XV-HDT330_new.book 28 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
1 If the system isn’t already on, press
STANDBY/ON to switch it on.
2
3
Press ROOM SETUP.
• If you have previously set up the room type
and seating position, the display will show
the current room settings.
Press ENTER.
4 Use the / (cursor up/down)
buttons to select a room type then press
ENTER.
Choose one of the following depending on
your room size:
Using the on-screen displays
For ease of use, this system makes extensive
use of graphical on-screen displays (OSDs).
You should get used to the way these work as
you’ll need to use them when setting up the
system, using some of the playback features,
such as program play, and when making
more advanced settings for audio and video.
All the screens are navigated in basically the
same way, using the cursor buttons to
change the highlighted item and pressing
ENTER to select it.
• S – Smaller than average room
• M – Average room
• L – Larger than average room
HOME
MENU
ENTER
5 Use the / (cursor up/down)
buttons to select a seating position
setting, then press ENTER.
Choose one of the following depending on
where your main listening position is:
RETURN
• Fwd – If you are nearer to the front
speakers than the surround speakers
ENTER
• Mid – If you are equal distance from the
front and surround speakers
• Back – If you are nearer to the surround
speakers than the front speakers
• The Room Setup automatically sets up
channel levels and channel delay. If you
have already set the channel levels
manually (see Setting the channel levels
on page 62), you will see Room Set? in
the display when you first press the
ROOM SETUP button. If you continue, the
previous settings will be overwritten.
• For more detailed surround sound setup,
see Setting up surround sound on
page 61.
28
En
Button
What it does
HOME
MENU
Displays/exits the on-screen
display
Changes the highlighted menu
item
ENTER
Selects the highlighted menu
item (both ENTER buttons work
in exactly the same way)
RETURN
Returns to the main menu
without saving changes
XV-HDT330_new.book 29 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
• Throughout this manual, ‘Select’ means
use the cursor buttons to highlight an
item on-screen, then press ENTER.
1 If the system isn’t already on, press STANDBY/ON to switch on.
If you’re playing a DVD or Video CD, also turn
on your TV and make sure that it is set to the
correct video input.
2 Press OPEN/CLOSE to open the disc
tray.
• The button guide at the bottom of every
OSD screen shows you which buttons
you’ll need to use for that screen.
Playing discs
3 Load a disc.
Load a disc with the label side facing up in the
front-most disc space, using the disc tray
guide to align the disc. (If you’re loading a
double-sided DVD disc, load it with the side
you want to play face down.)
The basic playback controls for playing DVD,
CD, Video CD and WMA/MP3 discs are
covered here. Further functions are detailed
in the next chapter.
STANDBY/ON
OPEN/CLOSE
DVD/CD
Disc number
If you want to load more discs, press DISC
SKIP (remote or front panel) to rotate the disc
tray. You can load up to five discs at once.
VOLUME
• Do not place discs in the two partially
accessible disc spaces, as it easy to
misalign them. Use only the front-most
space.
ENTER
• Do not load more than one disc in a
space.
ENTER
DISC 1
DISC 2
DISC 3
DISC 4
DISC 5
CD MODE
DISC SKIP
• Before loading or removing discs, always
wait for the disc mechanism to come to a
complete stop.
• Do not rotate the disc tray by hand.
Always use the DISC SKIP button.
• Sometimes, when the disc tray
mechanism is moving, the controls are
inoperative.
29
En
XV-HDT330_new.book 30 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
4 Press (remote) or (front panel)
to start playback of the disc loaded in the
front-most disc space.
Alternatively, use the DISC buttons on the
remote, or the DIRECT PLAY buttons on the
front panel to start playback of other discs.
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. You can find
other playback features in Playing audio and
video discs on page 42.
If you’re playing a DVD or Video CD, a menu
may appear. See DVD-Video disc menus on
page 33 and Video CD PBC menus on page 34
for how to navigate these.
ENTER
If you’re playing an WMA/MP3 or JPEG disc,
it may take a few seconds before playback
starts, depending on the complexity of the file
structure on the disc.
If you loaded a CD/CD-R/RW containing
JPEGs, a slideshow will start. See Viewing
JPEG discs on page 55 for more on playing
these discs.
ENTER
• See also PhotoViewer on page 72 if the
disc contains both WMA/MP3 audio files
and JPEG picture files.
5 Use the – VOLUME + button (or the
front panel VOLUME knob) to adjust the
volume.
30
En
Button
What it does
Starts playback.
DVD and Video CD: If the display
shows Resume or Last Mem
playback starts from the resume
or last memory point (see also
Resume and Last Memory
below.)
Pauses a disc that’s playing, or
restarts a paused disc.
Stops playback.
DVD and Video CD: The display
shows Resume. Press again if
you want to cancel the resume
function. (See also Resume and
Last Memory below.)
XV-HDT330_new.book 31 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
Button
What it does
Press to start fast reverse
scanning. Press (play) to
resume normal playback.
Press to start fast forward
scanning. Press (play) to
resume normal playback.
Skips to the start of the current
track or chapter, then to previous
tracks/chapters.
Skips to the next track or
chapter.
FOLDER +/– Skips to the next/previous folder
when playing an WMA/MP3 disc.
Numbers
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track number (for CD/
Video CD/WMA/MP3) after a
few seconds (or after pressing
ENTER).
• If the disc is playing, playback
jumps to the start of the selected
chapter or track after a few
seconds (or after pressing
ENTER).
• You may find with some DVD discs that
some playback controls don’t work in
certain parts of the disc. This is not a
malfunction.
Using the front panel controls
The OPEN/CLOSE and (stop) buttons on
the front panel work the same way as the
remote control equivalents.
The front panel scan and skip buttons
( and ) are combined. Press
once for chapter/track skip, or press and hold
for scanning.
Resume and Last Memory
When you stop playback of a DVD or Video CD
disc, Resume is shown in the display indicating that you can resume playback again
from that point.
If the disc tray is not opened, the next time you
start playback the display shows Resume and
playback resumes from the resume point.
For DVD discs only: If you change discs using
the DISC SKIP, DISC or DIRECT PLAY
buttons, or take the disc out of the player, the
play position is stored in memory. When you
load the disc next time, the display shows
Last Mem and you can resume playback (this
works for up to five discs).
If you want to clear the resume/last memory
point, press (stop) while Resume or Last
Mem is displayed.
• When a Video CD is loaded, the Resume
point is lost if the system is switched off.
• For the Last Memory function to work, you
must press (stop) to stop playback
before opening the disc tray or changing
the disc.
• The Last Memory function doesn’t work
with VR format DVD-RW discs.
31
En
XV-HDT330_new.book 32 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
Changing discs
You can change any of the discs not in the
play position using the EXCHANGE button on
the front panel. Because the disc in the play
position is unaffected, you can use this button
to change discs even during playback.
1
Press EXCHANGE to open the disc tray.
• The EXCHANGE button only works when
there is at least one disc loaded.
2 Load a disc with the label side facing
up, using the disc tray guide to align the
disc.
3 Press EXCHANGE or OPEN/CLOSE to
close the disc tray.
• Always use the OPEN/CLOSE or
EXCHANGE button to close the disc tray
after exchanging discs. Never push the
disc tray shut by force.
• After I load a DVD disc, it ejects
automatically after a few seconds!
Most likely, the disc is the wrong region
for your system. The region number
should be printed on the disc; check it
against the region number of the system
(which you can find on the rear panel).
See also DVD Video regions on page 74.
If the region number is OK, it may be that
the disc is damaged or dirty. Clean the
disc and look for signs of damage. See
also Using and taking care of discs on
page 74.
Disc number
• If you want to load more discs, press DISC
SKIP to rotate the disc tray two disc
spaces.
• Before loading or removing discs, always
wait for the disc mechanism to come to a
complete stop.
• Load discs only in the two fully accessible
disc spaces. Do not try and load discs into
any of the other spaces; they may not load
correctly and cause the system to
malfunction.
• Do not rotate the disc tray by hand.
Always use the DISC SKIP button.
• Do not obstruct the movement of the disc
tray.
32
En
• Why won’t the disc I loaded play?
First check that you loaded the disc the
right way up (label side up), and that it’s
clean and not damaged. See Using and
taking care of discs on page 74 for
information on cleaning discs.
If a disc loaded correctly won’t play, it’s
probably an incompatible format or disc
type, such as DVD-Audio or DVD-ROM.
See Disc / content format playback
compatibility on page 10 for more on disc
compatibility.
• I have a widescreen TV so why are there
black bars at the top and bottom of the
screen when I play some discs?
Some movie formats are such that even
when played on a widescreen TV, black
bars are necessary at the top and bottom
of the screen. This is not a malfunction.
XV-HDT330_new.book 33 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
• I have a standard (4:3) TV and set the
system to show widescreen DVDs in pan &
scan format, so why do I still get black bars
top and bottom with some discs?
Some discs override the display
preferences of the system, so even if you
have 4:3 (Pan & Scan) selected, those
discs will still be shown in letterbox
format. This is not a malfunction.
DVD-Video disc menus
Many DVD-Video discs contain menus from
which you can select what you want to watch.
They may give access to additional features,
such as subtitle and audio language
selection, or special features such as
slideshows. See the disc packaging for
details.
Sometimes DVD-Video menus are displayed
automatically when you start playback; others
only appear when you press DVD MENU or
TOP MENU.
Button
What it does
TOP MENU Displays the ‘top menu’ of a DVD
(SHIFT +
disc—this varies with the disc.
DVD
MENU)
DVD
MENU
Displays a DVD disc menu—this
varies with the disc and may be
the same as the ‘top menu’.
Moves the cursor around the
screen.
ENTER
Selects the current menu option.
RETURN
Returns to the previously
displayed menu screen.
Numbers
Highlights a numbered menu
option (some discs only). Press
ENTER to select.
TOP MENU
DVD MENU
ENTER
RETURN
ENTER
SHIFT
33
En
XV-HDT330_new.book 34 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
Video CD PBC menus
Listening to the radio
Some Video CDs have menus from which you
can choose what you want to watch. These
are called PBC (Playback control) menus.
The tuner can receive both FM and AM
broadcasts, and lets you memorize your
favorite stations so you don’t have to manually
tune in every time you want to listen.
You can play a PBC Video CD without having
to navigate the PBC menu by starting
playback using a number button to select a
track, rather than (play) (or on the
front panel).
STANDBY/ON
FM/AM
TUNER
ENTER
RETURN
SYSTEM SETUP
TUNE
ST
ST
ENTER
TUNE
ENTER
ENTER
SHIFT
34
En
Button
What it does
RETURN
Displays the PBC menu.
Numbers
Selects a numbered menu
option.
1 If the system isn’t already on, press
STANDBY/ON to switch on.
Displays the previous menu page
(if there is one).
Displays the next menu page (if
there is one).
2 Press TUNER to switch to the tuner,
then press repeatedly to select the AM or
FM band.
The display indicates the tuner band and the
frequency.
ENTER
Press to select highlighted menu
option.
• If you’re using the front panel controls,
the TUNER button switches between FM,
AM and station presets (see on page 35).
XV-HDT330_new.book 35 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
3 Tune to a frequency.
There are three tuning modes—manual, auto,
and high-speed:
• Manual tuning: Press TUNE +/–
repeatedly to change the displayed
frequency.
• Auto tuning: Press and hold TUNE +/–
until the frequency display starts to move,
then release. The tuner will stop on the
next station it finds. Repeat to search for
other stations.
• High-speed tuning: Press and hold
TUNE +/– until the frequency display
starts to move rapidly. Keep the button
held down until you reach the frequency
you want. If necessary, fine tune the
frequency using the manual tuning
method.
• You can use the and buttons on the front panel instead of the
TUNE +/– buttons.
Improving poor FM reception
If you’re listening to an FM station in stereo
but the reception is weak, you can improve
the sound quality by switching to mono.
1 Press SYSTEM SETUP (SHIFT + HOME
MENU).
2 Use the / (cursor left/right)
buttons to choose ‘FM Mode?’, then press
ENTER.
3 Use the / (cursor up/down)
buttons to select ‘Mono’ or ‘Auto’, then
press ENTER.
Select Auto in step 3 to switch back to autostereo mode (the stereo indicator lights when
receiving a stereo broadcast).
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the / (cursor left/right)
buttons to choose ‘St. Memory?’ then
press ENTER.
4 Use the / (cursor up/down)
buttons to select the station preset you
want.
There are 30 preset locations; each can store
one station preset.
5
Press ENTER to save the station preset.
• If the system is unplugged from the power
supply completely, saved stations will
remain for several days, after which you’ll
have to save them again.
Listening to station presets
1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a
station preset.
• If you are using the front panel controls,
press TUNER FM/AM/ST. until you’re in
station preset mode, then use the and buttons to select a station
preset.
35
En
XV-HDT330_new.book 36 ページ 2003年1月16日 木曜日 午後4時12分
04
Getting started
Listening to other sources
You can connect up to three external sources
(TV, satellite receiver, etc.) to this system,
including one digital source. See also
Listening to TV audio through this system on
page 17 and Connecting auxiliary components
on page 77.
STANDBY/ON
L1/L2
TV
LINE
1 If the system isn’t already on, press STANDBY/ON to switch on.
Also make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2
Select the source you want to listen to.
• If you’re using the remote control, press
TV to select the TV input, or use the LINE
(L1/L2) button to select the LINE 1 or LINE
2 input.
• Using the front panel controls, the TV/L1/
L2 button switches between the three
inputs.
3 If necessary, start playback of the
external source.
36
En
XV-HDT330_new.book 37 ページ 2003年1月16日 木曜日 午後4時12分
05
Home theater sound
Chapter 5
Home theater sound
Using this system you can enjoy listening to
sources, analog or digital, in either stereo or
surround sound.
Auto listening mode
The Auto listening mode is the simplest way
to listen to any source as it was mastered: the
output from the speakers mirrors the
channels in the source material.
Listening in surround sound
You can listen to any source—stereo or
multichannel, analog or digital—in surround
sound. Surround sound is generated from
stereo sources using one of the Dolby Pro
Logic decoding modes.
SURROUND
AUTO
ENTER
• Press AUTO to select the ‘Auto’
listening mode.
If the source is Dolby Digital or DTS, the
2 DIGITAL or DTS indicator on the front
panel lights.
• Any previously active Dolby Pro Logic or
Advanced Surround mode is cancelled
when Auto listening mode is selected.
• Press SURROUND repeatedly to select
a listening mode (or press SURROUND
then use the / (cursor up/down)
buttons).
The listening mode choices that appear in the
display will vary according to the type of
source that’s playing.
• Auto – Auto listening mode (see above)
• Dolby Digital / DTS – Dolby Digital or
DTS decoding (depending on the source).
For a multichannel source, this will be the
same as Auto.
• Pro Logic – 4.1 channel surround sound
for use with any two-channel source
• Movie – Pro Logic II 5.1 channel surround
sound, especially suited to movie
sources, for use with any two-channel
source
37
En
XV-HDT330_new.book 38 ページ 2003年1月16日 木曜日 午後4時12分
05
Home theater sound
• Music – Pro Logic II 5.1 channel surround
sound, especially suited to music
sources, for use with any two-channel
source (see also Dolby Pro Logic II Music
settings below)
• Stereo – See Listening in stereo below
• Pnrm. (Panorama): Creates more
spacious surround sound
3 Use the / (cursor up/down)
buttons to adjust the setting.
Center Width is adjustable between 0 and 7;
Dimension between –3 and +3. Panorama is
On or Off.
4
• See also Using the Advanced Surround
effects below, for further stereo and
surround playback options.
• You can’t use the Surround modes with
high sampling rate 88.2 / 96 kHz sources.
• When listening in Dolby Digital / DTS
mode, two-channel material will
automatically be played in surround
sound using Dolby Pro Logic decoding.
• Dolby Digital / DTS sources that use only
the center channel cannot be played back
in surround sound.
Dolby Pro Logic II Music settings
When listening in Dolby Pro Logic II Music
mode, there are three further parameters you
can adjust: Center Width, Dimension, and
Panorama.
1 With Dolby Pro Logic II Music mode
active, press SOUND MODE.
2 Use the / (cursor left/right)
buttons to select ‘C Width’, ‘Dimen.’ or
‘Pnrm.’
• C Width (Center Width): Makes the
center channel wider (higher settings) or
narrower (lower settings)
• Dimen. (Dimension): Makes the sound
more distant (minus settings), or more
forward (positive settings)
38
En
Press ENTER to confirm.
Listening in stereo
You can listen to any source—stereo or
multichannel, analog or digital—in stereo.
When playing a multichannel source, stereo
sound is created by downmixing all channels
to the front left/right speakers and the
subwooofer.
SURROUND
• Press SURROUND repeatedly until
‘Stereo’ shows in the display.
Any active Advanced Surround mode is
cancelled.
• See also Using the Advanced Surround
effects below, for further stereo and
surround playback options.
Listening with headphones
When headphones are connected, only the
Stereo (default) and Phones Surround
(virtual surround sound for headphones)
modes are available.
When you connect a pair of headphones, the
listening mode automatically changes to
Stereo. When you disconnect them it reverts
to the previous mode.
XV-HDT330_new.book 39 ページ 2003年1月16日 木曜日 午後4時12分
05
Home theater sound
• With headphones connected, press
ADVANCED to select ‘Phones Surround’ or
SURROUND to select ‘Stereo’.
• Virtual – Creates the impression of
surround sound from just the front
speakers
• 5ch Stereo – Designed to give powerful
surround sound to stereo music sources
Using the Advanced Surround
effects
Advanced Surround effects can be used with
multichannel or stereo sources for a variety of
additional surround sound effects.
• You can’t use the Advanced Surround
modes with high sampling rate
88.2 / 96 kHz sources.
• You can use any of the above Advanced
Surround modes with any type of source.
The descriptions are given only as a guide.
ADVANCED
ENTER
SOUND
MODE
• Press ADVANCED to select an
Advanced Surround mode (or press
ADVANCED then use the / (cursor up/
down) buttons).
Press repeatedly to select from:
• Adv. Music – Gives a concert hall-type
sound
• Adv. Movie – Gives a movie theater-type
sound
• Expanded – Creates an extra wide stereo
field
Adjusting the Advanced Surround
effect level
You can emphasize or reduce the effect of the
Advanced Surround modes as you like. For
each Advanced Surround mode you can set
the effect level independently.
1 With one of the Advanced Surround
modes active, press SOUND MODE.
2 Use the / (cursor left/right)
buttons to select ‘Effect’.
3 Use the / (cursor up/down)
buttons to adjust the effect level.
The effect level can be adjusted from 10 (min)
to 90 (max).
4
Press ENTER to confirm.
• TV Surr. – Designed for mono or stereo TV
broadcasts and other sources
• Sports – Designed for sports and other
programs based on commentary
• Game – Creates surround sound from
video game sources
• ExPwrSurr. (Extra Power Surround) –
Gives additional energy and width to
stereo sources
39
En
XV-HDT330_new.book 40 ページ 2003年1月16日 木曜日 午後4時12分
05
Home theater sound
Enhancing dialogue
• Default setting: Dialog. Off
The Dialogue Enhancement feature is
designed to make the dialog stand out from
other background sounds in a TV or movie
soundtrack.
DIALOGUE
• Press DIALOGUE to select the amount
dialog enhancement.
Press repeatedly to select from:
• Dialog. Off – No dialog enhancement
• Dialog. Mid – Moderate dialog
enhancement
• Dialog. Max – Strong dialog
enhancement
• You can’t use Dialog Enhancement with
high sampling rate 88.2 / 96 kHz sources.
• Press VIR. SB repeatedly to switch
between ‘Vir. SB On’ and ‘Vir. SB Off’.
• You can’t use Virtual Surround Back
when listening in Stereo or Virtual
listening modes.
• If there is no surround channel, Virtual
Surround Back has no effect.
• You can’t use the Virtual Surround
Back effect with high sampling rate 88.2 /
96 kHz sources, or with headphones.
Using Quiet and Midnight
listening modes
• Default setting: Off
The Quiet listening feature reduces excessive
bass or treble in a sound source. You can use
this feature if the music is a little bit harsh and
you would like a smoother sound.
The Midnight listening feature allows you to
hear effective surround sound of movies at
low volume levels. The effect automatically
adjusts according to the volume at which
you’re listening.
Listening with a virtual
surround back speaker
• Default setting: Vir. SB Off
The Virtual Surround Back feature can be
used when listening in surround sound to
simulate an added surround back channel. In
a real theater the surround back speaker
would be directly behind you, creating more
cohesive and realistic surround sound.
VIR.SB
40
En
QUIET/
MIDNIGHT
• Press QUIET/MIDNIGHT (SHIFT +
SOUND MODE) repeatedly to switch
between ‘Quiet’, ‘Midnight’ and ‘Off’.
XV-HDT330_new.book 41 ページ 2003年1月16日 木曜日 午後4時12分
05
Home theater sound
Adjusting the bass and treble
• Default setting: Bass: 0, Treble: 0
Use the bass and treble controls to adjust the
overall tone.
• Press BASS MODE repeatedly to
choose an option that fits the source
you’re listening to.
• Music – Can be used with music to give a
deeper bass sound
• Cinema – Good for action movies or
movies with lots of sound effects
ENTER
SOUND
MODE
• P. Bass – Can be used with music sources
to bring the beat of the music (or
soundtrack) to the forefront
• Off
1
Press SOUND MODE.
2 Use the / (cursor left/right)
buttons to select ‘Bass’ or ‘Treble’.
3 Use the / (cursor up/down)
buttons to adjust the sound.
The bass and treble can be adjusted from –3
to +3.
4
• You can’t use the bass mode when
headphones are connected.
Muting the sound
Use the MUTE button if you need to
momentarily turn off all sound from the
speakers.
Press ENTER to confirm.
MUTE
• Bass and treble adjustment is not
possible when the Quiet or Midnight
modes are active.
Boosting the bass level
• Press MUTE to mute the volume.
To cancel, adjust the volume or press MUTE
again.
There are three bass modes you can use to
enhance the bass in a source.
BASS MODE
41
En
XV-HDT330_new.book 42 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
Chapter 6
Playing audio and video discs
Introduction
Most of the features described in this chapter
make use of on-screen displays. For an
explanation of how to navigate these, see
Using the on-screen displays on page 28.
Many of the functions covered in this chapter
apply to DVD discs, Video CDs, CDs and
WMA/MP3/JPEG discs, although the exact
operation of some varies slightly with the kind
of disc loaded.
Some DVD discs restrict the use of some
functions (random or repeat, for example).
This is not a malfunction.
When playing Video CDs, some of the
functions are not available during PBC
playback. If you want to use them, start the
disc playing using a number button to select
a track.
• If you want to play the MP3 or WMA tracks
on a disc that also contains JPEG picture
files, make sure that the Photoviewer
option is set to Off. See PhotoViewer on
page 72.
Playing only CDs, MP3 and
WMA discs (CD mode)
Using this feature you can play only the CDs,
MP3 and WMA discs loaded in the disc tray—
automatically skipping over any DVDs and
Video CDs loaded. This may be useful if you
have a mixture of discs loaded but only want
to play music: you don't have to keep track of
what kind of disc is where in the disc tray.
42
En
1
Press CD MODE to switch CD mode on.
• The indicator on the front panel lights
when CD mode is on.
2 Press (play) to start playback.
The first CD loaded automatically starts to
play.
Once all the CD/WMA/MP3 discs loaded have
played, playback automatically stops.
• To cancel the CD mode, press CD MODE
again.
• If you open the disc tray and load a DVD,
Video CD or JPEG disc in the front-most
position then press (play) (on the front
panel), CD mode is cancelled.
• You can't switch on CD mode while
playing a DVD or Video CD. Stop playback
first.
• Although program play is not possible in
CD mode, it is possible to program a
playlist. When you start program playback, however, CD mode is cancelled.
• Repeat and random play is possible in CD
mode (see Using repeat play on page 45
and Using random play on page 46).
Using the Disc Navigator to
browse the contents of a disc
Use the Disc Navigator to browse through the
contents of a disc to find the part you want to
play. You can use the Disc Navigator when a
disc is playing or stopped.
XV-HDT330_new.book 43 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
• Not all VR format DVD-RW discs have a
Playlist.
• You can’t use the Disc Navigator when
playing a Video CD in PBC mode, or an
unfinalized CD-R/RW disc.
1 Press HOME MENU and select ‘Disc
Navigator’ from the on-screen display.
Alternatively, if a CD, Video CD, VR mode
DVD-RW or WMA/MP3/JPEG disc is loaded,
you can press DVD MENU, which takes you
straight to the Disc Navigator screen.
Disc Navigator
DVD-RW
Original
Play List
The screen for CDs and Video CDs shows a
list of tracks.
HOME MENU
Disc Navigator
DVD
Track 1-10
Play Mode
Video Adjust
Initial Settings
Disc Navigator
2 Select what you want to play.
Depending on the type of disc you have
loaded, the Disc Navigator looks slightly
different.
The screen for DVD discs shows the titles on
the left and the chapters on the right. Select a
title, or a chapter within a title.
CD
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
Track 07
Track 08
The screen for an WMA/MP3 disc shows the
folder names on the left and the track names
on the right (note that any folder and track
names that contain accented or non-roman
characters, will show up with generic names
– F_033, T_035, etc.).
Select a folder, or a track within a folder.
Disc Navigator
Disc Navigator
DVD
Title(1-03)
01. 3/31 FIRST LEAGUE
02. 4/28 SECOND LEAGUE
03. 4/29 FINAL ROUND
Title 1-10
Chapter 1-3
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
For a VR format DVD-RW disc select beween
the Playlist and Original areas of the disc, or
a title. Press (cursor right) to preview the
title.
• You can’t switch between Original and
Playlist during playback.
WMA/MP3
Folder 1-17
Track 1-10
001. ACP
002. Nth Degree
003. Pfeuti
004. Live
005. Glitch music
006. CodHead
007. Thermo
008. Missing Man
001. Gravity deluxe
002. Tesla's patent
003. Border dispute
004. Delayed by rain
005. Accident incident
006. Pigeon post
007. Outernational
008. Vacuum tube
Playback starts after you press ENTER.
• You can’t use the Disc Navigator when
there are no discs loaded.
43
En
XV-HDT330_new.book 44 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
• Another way to find a particular place on
a disc is to use one of the search modes.
See Searching a disc on page 51.
Scanning discs
1
During playback, press (pause).
2 Press and hold / or / until
slow motion playback starts.
• The slow motion speed is shown onscreen.
You can fast-scan discs forward or backward
at various different speeds.
• There is no sound during slow motion
playback.
1 During playback, press or to
start scanning.
3 Press repeatedly to change the slow
motion speed.
• The slow motion speed is displayed onscreen.
2 Press repeatedly to increase the
scanning speed.
• WMA/MP3 tracks can only be scanned at
one speed.
4 To resume normal playback, press (play).
• The scanning speed is shown on-screen.
3 To resume normal playback, press (play).
• Video CD only supports forward slow
motion playback.
• The picture quality during slow motion
playback is not as good as during normal
playback.
• Sound can be heard while scanning audio
CDs and MP3 discs.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• When scanning a Video CD or WMA/MP3
track, playback automatically resumes at
the end or beginning of the track.
• There is no sound while scanning DVDs,
WMA tracks and Video CDs, and no
subtitles while scanning DVDs.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached on a DVD disc.
Frame advance/frame reverse
You can advance or back up DVD-Video discs
frame-by-frame. With Video CDs and VR
mode DVD-RW discs, you can only use frame
advance.
1
Playing in slow motion
You can play DVDs and Video CDs at four
different forward slow motion speeds. DVD
discs can also be played at two reverse
speeds.
44
En
During playback, press (pause).
2 Press / or / to reverse or
advance a frame at a time.
3 To resume normal playback, press (play).
XV-HDT330_new.book 45 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
3 Press ENTER on ‘A(Start Point)’ to set
the loop start point.
• The picture quality when using frame
reverse is not as good as frame advance.
• Depending on the disc, normal playback
may automatically resume when a new
chapter is reached.
• When changing direction with a DVD
disc, the picture may ‘jump’. This is not a
malfunction.
Looping a section of a disc
The A-B Repeat function allows you to specify
two points (A and B) within a track (CD and
Video CD) or title (DVD-Video and DVD-RW)
that form a loop which is played over and over.
• You can’t use A-B Repeat with WMA/MP3
discs, Video CDs in PBC mode,
unfinalized CD-R/RW discs, or VR format
DVD-RW discs.
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘A-B Repeat’ from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
A(Start Point)
B(End Point)
Off
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
A(Start Point)
B(End Point)
Off
4 Press ENTER on ‘B(End Point)’ to set
the loop end point.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
A(Start Point)
B(End Point)
Off
After pressing ENTER, playback jumps back
to the start point and plays the loop.
• The minimum loop time is 2 seconds.
5 To resume normal playback, select
‘Off’ from the menu.
Using repeat play
There are various repeat play options,
depending on the kind of disc loaded. It’s also
possible to use repeat play together with
program play to repeat the tracks/chapters in
the program list (see Creating and editing a
DVD program list on page 47 and Creating and
editing a non-DVD program list on page 49).
• Repeat play is not available with Video
CDs in PBC mode, or unfinalized CD-R/
RW discs.
45
En
XV-HDT330_new.book 46 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
1 During playback, press HOME MENU
and select ‘Play Mode’.
2 Select ‘Repeat’ from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Title Repeat
Chapter Repeat
Repeat Off
3 Select a repeat play option.
If program play is active, select Program
Repeat to repeat the program list, or Repeat
Off to cancel.
For DVD discs, select Title Repeat or
Chapter Repeat (or Repeat Off).
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
All Discs Repeat
Disc Repeat
Folder Repeat
Track Repeat
Repeat Off
• You can also use the REPEAT (SHIFT + 2)
button on the remote to select a repeat
play mode. The repeat mode is indicated
in the front panel display and on-screen.
The repeat modes available are the same
as when choosing from the Play Mode
menu.
Title Repeat
Chapter Repeat
Repeat Off
• If you switch camera angle during repeat
play, repeat play is canceled.
For CDs and Video CDs, select All Discs
Repeat, Disc Repeat or Track Repeat (or
Repeat Off).
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
For WMA/MP3 discs, select All Discs Repeat,
Disc Repeat, Folder Repeat or Track Repeat
(or Repeat Off).
All Discs Repeat
Disc Repeat
Track Repeat
Repeat Off
Using random play
With a DVD you can choose to play titles or
chapters within a title in a random order. With
CDs, Video CDs, MP3 or WMA discs, you can
play all the discs at random, or just the
contents of a single disc.
You can set the random play option when a
disc is playing or stopped.
• You can’t use random play with VR format
DVD-RW discs, Video CDs playing in PBC
mode, or while a DVD disc menu is being
displayed.
46
En
XV-HDT330_new.book 47 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
1 Press HOME MENU and select ‘Play
Mode’.
2 Select ‘Random’ from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Random Title
Random Chapter
Random Off
• You can also use the RANDOM (SHIFT +
3) button on the remote to select a
random play mode. The random mode is
indicated in the front panel display and
on-screen. The random modes available
are the same as when choosing from the
Play Mode menu. Press ENTER to start
random play.
• To stop the disc and cancel random
playback, press (stop).
3 Select a random play option.
For DVD discs, select Random Title or
Random Chapter (or Random Off)
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Random Title
Random Chapter
Random Off
For CDs, Video CDs and WMA/MP3 discs,
select Random All, Random Disc (or
Random Off).
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Rndom All
Random Disc
Random Off
• The Random All function ignores DVDs
loaded in the player.
• To cancel random playback without
stopping playback, press CLEAR. The disc
will play to the end, then stop.
• During random play, the and buttons function a little differently to
normal: returns to the beginning of
the current track/chapter. You can't go
back further than this. selects
another track/chapter at random from
those remaining.
• You can't use random play together with
program or repeat play.
Creating and editing a DVD
program list
This feature lets you program the play order of
titles and chapters on the DVD disc currently
in the play position.
If you want to program the play order of CDs,
Video CDs, MP3 or WMA discs, see Creating
and editing a non-DVD program list on
page 49.
• You can’t use Program play with VR
format DVD-RW, Video CDs playing in
PBC mode, or while a DVD disc menu is
being displayed.
47
En
XV-HDT330_new.book 48 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
1 Make sure that the DVD disc you want
to make the program list for is in the play
position.
Use the DISC select buttons on the remote, or
the DIRECT PLAY buttons on the front panel
to select the disc.
2 Press HOME MENU and select ‘Play
Mode’.
• Alternatively, press PROGRAM (SHIFT +
1) and skip to step 5.
3 Select ‘Program’ from the list of
functions on the left.
• When this screen first appears, the first
title on the disc is highlighted. From here
you can select a title, or a chapter within a
title.
• Some titles and/or chapters of DVD discs
may be grayed out, depending on the
disc. Grayed out titles/chapters can’t be
added to the program list.
6 Press ENTER to add the highlighted
item to the program list.
The program step number automatically
moves to the next position.
Program
Play Mode
Program Step
01.
02.
03.
04.
05.
06.
07.
08.
Create/Edit
Playback Start
Playback Stop
Program Delete
A-B Repeat
Repeat
Random
Program
Search Mode
4 Select ‘Create/Edit’ from the list of
program options.
Play Mode
5 Select a title or chapter for the first/
next step in the program list.
Program
Program Step
01.
02.
03.
04.
05.
06.
07.
08.
48
En
-01
Disc
. DVD
. CD
. DVD
. ???
. ---
Disc
. DVD
. CD
. DVD
. ???
. ---
Title 1-38
Chapter 1-4
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
7 Add further items to the program list
in the same way.
• A program list can contain up to 24 steps.
• To clear a step in the program list, move to
the Program Step column, highlight the
step to clear and press CLEAR.
Create/Edit
Playback Start
Playback Stop
Program Delete
A-B Repeat
Repeat
Random
Program
Search Mode
-01
Title 1-38
Chapter 1-4
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
• To insert a step in the program list, move
to the Program Step column and
highlight the step where you want a new
step to appear. After you select a title/
chapter, all the program steps will move
down one to make space for the new one.
8 To play the program list, press (play).
• Program play remains active until you
turn off program play (see below), erase
the program list (see below), or switch off
the system.
XV-HDT330_new.book 49 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
Creating and editing a nonDVD program list
This feature lets you program the play order of
folders and tracks on the CDs, Video CDs and
WMA/MP3 discs loaded.
If you want to program the play order of a DVD
disc, see Creating and editing a DVD program
list on page 47.
4 Select ‘Create/Edit’ from the list of
program options.
Play Mode
Create/Edit
Playback Start
Playback Stop
Program Delete
A-B Repeat
Repeat
Random
Program
Search Mode
5 Select a folder or track for the first/
next step in the program list.
• You can’t use program play with Video
CDs playing in PBC mode, or with
unfinalized CD-R/RW discs.
1 Make sure that a non-DVD disc is in
the play position.
Use the DIRECT PLAY buttons on the front
panel to select a disc.
2 Press HOME MENU and select ‘Play
Mode’.
• Alternatively, press PROGRAM (SHIFT +
1) and skip to step 5.
3 Select ‘Program’ from the list of
functions on the left.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Create/Edit
Playback Start
Playback Stop
Program Delete
Program
Program Step
01.
02.
03.
04.
05.
06.
07.
08.
-01
Disc
. WMA/MP3
. CD
. DVD
. ???
. ---
Folder 1-6
Track 1-10
001. Electro A-M
002. Electro N-Z
003. Rock 1
004. Rock 2
005. Jazz
006. Classical
001. Gravity Deluxe
002. Tesla's Patent
003. Border Dispute
004. Delayed by Rai
005. Pigeon Post
006. Outernational
007. Panic Button
008. Accident Incide
• When this screen first appears, the first
folder or track of the disc in the play
position is highlighted. From here you can
select something on this disc, or move left
to the Disc column and select something
from one of the other discs loaded.
• With WMA/MP3 discs, you can select a
folder, or an individual track in a folder.
• With CDs and Video CDs, select a track.
• Any DVDs loaded are shown grayed out
and can’t be selected.
• If the system has not yet determined the
type of disc in a tray position, ‘???’ is
displayed as the disc type. If you select it,
‘??? 1-999’ is displayed in the middle and
right columns. You can add items to the
program list from this disc, although what
you select must actually exist on the disc
for it to play. Also, if the disc is a DVD,
program play will be cancelled when it
comes to that disc in the program list
49
En
XV-HDT330_new.book 50 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
• If a tray position is empty, ‘– – –’ is
displayed.
6 Press ENTER to add the highlighted
item to the program list.
The program step number automatically
moves to the next position.
• During program play, press to skip to
the next program step.
• Press CLEAR during playback to switch
off program play. Press while stopped to
erase the program list.
Program
Program Step
01.
02.
03.
04.
05.
06.
07.
08.
-001-003
-001-003
Disc
. WMA/MP3
. CD
. DVD
. ???
. ---
Folder 1-6
Track 1-10
001. Electro A-M
002. Electro N-Z
003. Rock 1
004. Rock 2
005. Jazz
006. Classical
001. Gravity Deluxe
002. Tesla's Patent
003. Border Dispute
004. Delayed by Rai
005. Pigeon Post
006. Outernational
007. Panic Button
008. Accident Incide
7 Add further items to the program list
in the same way.
• A program list can contain up to 24 steps.
• To clear a step in the program list, move to
the Program Step column, highlight the
step to clear and press CLEAR.
• To insert a step in the program list, move
to the Program Step column and
highlight the step where you want a new
step to appear. After you select a folder/
track, all the program steps will move
down one to make space for the new one.
8 To play the program list, press (play).
• Program play remains active until you
turn off program play (see below), erase
the program list (see below), or switch off
the system.
• To save your program list and exit the
program edit screen without starting
playback, press HOME MENU. (Don’t
press RETURN—your program list won’t
be saved.)
50
En
• The current playlist is erased if you
change the type of disc in the play
position (DVD or non-DVD) or select
Program Delete from the Play Mode
menu.
• DVD playback follows commands
recorded on the disc. There may be cases
where program play is automatically
cancelled or may not work. This is not a
malfunction
• With Video CDs that feature PBC
playback, make sure that the disc is
stopped before you start making the
program list.
Other functions available from the
program menu
As well as creating and editing a program list,
you can start program play, cancel program
play, erase the program list from the Play
Mode menu.
1 Press HOME MENU and select Play
Mode.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Create/Edit
Playback Start
Playback Stop
Program Delete
XV-HDT330_new.book 51 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
2
Select a program play function.
• Create/Edit – See above
• Playback Start – Starts playback of a
saved program list
3
4 Use the number buttons to enter a
title, chapter, folder or track number, or a
time.
• Playback Stop – Turns off program play,
but does not erase the program list
Play Mode
• Program Delete – Erases the program
list and turns off program play
A-B Repeat
Repeat
Random
Program
Search Mode
Searching a disc
You can search DVD discs by title or chapter
number, or by time. CDs can be searched by
track number, and Video CDs by track
number or time. WMA/MP3 discs can be
searched by folder or track number.
• You can’t use the search functions with
Video CDs in PBC mode, or unfinalized
CD-R/RW discs.
Select a search mode.
Title Search
Chapter Search
Time Search
Input Chapter
0 0 1
• For a time search, enter the number of
minutes and seconds into the currently
playing title (DVD) or track (Video CD) you
want playback to resume from. For
example, press 4, 5, 0, 0 to have playback
start from 45 minutes into the disc. For 1
hour, 20 minutes and 30 seconds, press 8,
0, 3, 0.
5
Press ENTER to start playback.
1 Press HOME MENU and select ‘Play
Mode’.
2 Select ‘Search Mode’ from the list of
functions on the left.
The search options that appear depend on the
kind of disc loaded. The screen below shows
the DVD search options.
Play Mode
A-B Repeat
Repeat
Random
Program
Search Mode
Title Search
Chapter Search
Time Search
• The disc must be playing in order to use
time search.
Switching DVD audio
language
When playing a DVD disc recorded with
dialog in two or more languages, you can
switch audio language during playback.
• Press AUDIO repeatedly to select an
audio language option.
Audio
Current /Total
1/ 2
French
Dolby Digital 3/2.1CH
51
En
XV-HDT330_new.book 52 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
Zooming the screen
• Some discs only allow you to change
audio language from the disc menu.
Press DVD MENU to access.
• To set audio language preferences, see
Audio Language on page 68.
Switching subtitles
Some DVD discs have subtitles in one or
more languages; the disc box will usually tell
you which subtitle languages are available.
You can switch subtitle language during
playback.
• Press SUBTITLE repeatedly to select a
subtitle option.
Current / Total
Subtitle
1/2
Using the zoom feature you can magnify a
part of the screen by a factor of 2 or 4, while
watching a DVD or Video CD.
1 During playback, use the ZOOM
button to select the zoom factor.
• Normal
• 2x
• 4x
Normal
Zoom 2x
Zoom 2x
English
Zoom 4x
Zoom 4x
• Some discs only allow you to change
subtitle language from the disc menu.
Press DVD MENU to access.
• To set subtitle preferences, see Subtitle
Language on page 68.
Switching audio channel
when playing a Video CD
When playing a Video CD, you can switch
between stereo, just the left channel or just
the right channel.
• Press AUDIO repeatly to select an
audio channel option.
Audio
52
En
Stereo
• Since DVD and Video CD has a fixed
resolution, picture quality will deteriorate,
especially at 4x zoom. This is not a
malfunction.
2 Use the cursor buttons to change the
zoomed area.
You can change the zoom factor and the
zoomed area freely during playback.
• If the navigation square at the top of the
screen disappears, press ZOOM again to
display it.
XV-HDT330_new.book 53 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
• DVD displays
• We do not recommend using DVD disc
menus when the screen is zoomed as
menu options will not be highlighted.
• If you are displaying subtitles, these will
disappear when the screen is zoomed.
They will reappear when you return the
screen to normal.
Play
DVD
Current / Total Elapsed
Remain
11/38
2.05
4.57
1. French
1. English
Audio Dolby Digital 3/2.1CH
Subtitle
Title
Play
Chapter
Tr. Rate
Total
7.02
1
Angle
DVD
Current / Total
11/38
Elapsed
2.05
Remain
Total
4.57
7.02
8.6Mbps
• VR format DVD-RW displays
Switching camera angles
Some DVD discs feature scenes shot from
two or more angles—check the disc box for
details.
When a multi-angle scene is playing, a
icon appears on screen and in the front panel
display to let you know that other angles are
available (this can be switched off if you
prefer—see Angle Indicator on page 70).
• During playback (or when paused),
press ANGLE to switch angle.
Displaying disc information
Various track, chapter and title information,
as well as the video transmission rate for DVD
discs, can be displayed on-screen while a disc
is playing.
• To show/switch the information
displayed, press DISPLAY (SHIFT + 8).
When a disc is playing, the information
appears at the top of the screen. Press
DISPLAY (SHIFT + 8) repeatedly to change
the displayed information.
Play
Title
Current / Total
1/32
1
Audio Dolby Digital
Play
DVD-RW
Original
Elapsed
0.08
2/0CH
DVD-RW
Remain
30.22
--
Total
30.30
Subtitle
Original
Current / Total
1/1
Chapter
Tr. Rate
4.3Mbps
• CD and Video CD displays
Play
CD
Disc
Play
Track
Current / Total
2/16
Elapsed
28.00
Remain
30.20
Total
58.20
Elapsed
1.07
Remain
4.40
Total
5.47
CD
• MP3 / WMA disc displays
Play
MP3
Current / Total
Elapsed
Track
1/17
0.18
Track Name
Outernational
Play
Remain
12.42
Total
13.00
MP3
Current / Total
Folder
2/7
Folder Name ACP
53
En
XV-HDT330_new.book 54 ページ 2003年1月16日 木曜日 午後4時12分
06
Playing audio and video discs
• JPEG disc displays
Play
• CD and Video CD displays
JPEG
Current / Total
File
1/40
File Name
FL000001
Play
JPEG
Current / Total
Folder
2/6
Folder Name Holiday
• You can see disc information (number of
titles/chapters, tracks, folders and so on)
from the Disc Navigator screen. See
Using the Disc Navigator to browse the
contents of a disc on page 42.
Front panel display information
Limited disc information also appears in the
front panel display. Press DISPLAY (SHIFT +
8) to change the displayed information.
• DVD / DVD-RW displays
2
54
En
2
8 49
Disc no.
Chapter no.
Elapsed title time
2 T 1 1 07 00
Disc no.
Title no.
Remaining title time
2
Disc no.
Chapter no.
Remaining chapter
time
2
0 42
1
4
1 16
Disc no.
Track no.
Elapsed track time
1
4
3 20
Disc no.
Track no.
Remaining track time
1 Ds c
53 15
Disc no.
Remaining disc time
• MP3 / WMA disc displays
4
2
0 35
Disc no.
Track no.
Elapsed track time
4 EVERYBOD
Disc no.
Track name
4 BE S T_OF_
Disc no.
Folder name
• JPEG disc displays
2 T I GER_01
Disc no.
File name
2 ZOO_TR I P
Disc no.
Folder name
XV-HDT330_new.book 55 ページ 2003年1月16日 木曜日 午後4時12分
07
Viewing JPEG discs
Chapter 7
Viewing JPEG discs
Playing a JPEG slideshow
After loading a CD/CD-R/RW containing
JPEG pictures, press (play) to start a
slideshow from the first folder/picture on the
disc. The pictures in each folder are displayed
in alphabetical order.
Pictures are automatically adjusted so that
they fill as much of the screen as possible (if
the aspect ratio of the picture is different to
your TV screen you may notice black bars at
the sides, or at the top and bottom of the
screen).
While the slideshow is running:
Button
What it does
Pauses the slideshow; press
again to restart.
Displays the previous picture.
Use with SHIFT to jump to the
first file in the previous folder.
Displays the next picture.
Use with SHIFT to jump to the
first file in the next folder.
ANGLE
Pauses the slideshow and
rotates the currently displayed
picture 90º clockwise. Press (play) to restart slideshow).
ZOOM
Pauses the slideshow and zooms
the screen (see below). Press (play) to restart slideshow).
DVD
MENU
Displays the Disc Navigator
screen (see below).
• The , ANGLE and ZOOM buttons do not
work while the display shows LOADING.
• The time it takes for a file to load increases
with large file sizes.
• Up to 999 files are viewable on a disc. If
there are more files than this on a disc,
only the first 999 files are viewable.
• If you want to play the MP3 or WMA tracks
on a disc that also contains JPEG picture
files, you should first set the
Photoviewer option to Off. See
PhotoViewer on page 72.
Using the JPEG Disc Navigator
and Photo Browser
Use the JPEG Disc Navigator to find a
particular folder or picture by filename on the
disc in the play position; use the Photo
Browser to find a picture within a folder by
thumbnail image.
1 Press DVD MENU to display the Disc
Navigator screen.
Disc Navigator
Folder 1-2
JPEG
001. F_001
002. F_002
File 1-40
001. FL000001
002. FL000002
003. FL000003
004. FL000004
005. FL000005
006. FL000006
007. FL000007
008. FL000008
55
En
XV-HDT330_new.book 56 ページ 2003年1月16日 木曜日 午後4時12分
07
Viewing JPEG discs
The left column shows the folders on the disc,
the right column shows the files in a folder.
(note that any folder and file names that
contain accented or non-roman characters,
will show up with generic names – F_033,
FL000035, etc.).
2 Use the cursor buttons (///) to
navigate.
When a file is highlighted, a thumbnail image
is displayed.
• When a folder is highlighted you can
press ENTER to open the Photo Browser
screen for that folder. See below for more
on using the Photo Browser.
3 To resume the slideshow from the
highlighted file, press ENTER.
3 Press ENTER to display the selected
thumbnail full size on screen.
The slideshow resumes from the selected
picture.
Zooming the screen
Using the zoom feature you can magnify a
part of the screen by a factor of 2 or 4, while
viewing pictures from a JPEG disc.
1 During sldeshow playback, use the
ZOOM button to select the zoom factor.
• Normal
• 2x
• 4x
Normal
Using the Photo Browser
The Photo Browser displays nine thumbnail
images at a time from the current folder.
1 From the Disc Navigator screen,
highlight a folder to display then press
ENTER.
The Photo Browser screen opens with the first
nine pictures displayed as thumbnails.
Photo Browser
2 / 40
Live at Soft
Zoom 2x
Zoom 4x
• The slideshow is paused when the screen
is zoomed.
2 Use the cursor buttons (///) to
highlight a thumbnail picture.
• Use the track skip buttons ( and )
to see the previous / next page of
thumbnails. Keep the button pressed if
you want to skip several pages; release
when you reach the page you want.
• To return to the Disc Navigator screen,
press RETURN.
56
En
• Since JPEG pictures have a fixed
resolution, picture quality may
deteriorate, especially at 4x zoom. This is
not a malfunction.
XV-HDT330_new.book 57 ページ 2003年1月16日 木曜日 午後4時12分
Viewing JPEG discs
07
2 Use the cursor buttons (///) to
change the zoomed area.
You can change the zoom factor and the
zoomed area freely.
• When you change the zoom area, this
becomes the new ‘default’ zoom area for
the disc loaded.
3 To resume the slideshow, press (play).
57
En
XV-HDT330_new.book 58 ページ 2003年1月16日 木曜日 午後4時12分
08
Using the timer
Chapter 8
Using the timer
Setting the wake-up timer
Use the wake-up timer to set the system to
switch on at any time and start playing
whatever source you want.
1 Select the source you want played.
For example, press TUNER (TUNER FM/AM/
ST. on the front panel) to select the radio as
your source.
2 Prepare the source.
For example, tune in the radio station you
want to wake up to.
• The clock must be set to the correct time
for the wake-up timer to work properly
(see Setting the clock on page 27).
FM/AM
TUNER
L1/L2
TV
LINE
Set the volume.
5 Use the / (cursor left/right)
buttons to select WAKE-UP then press
ENTER.
6 Use the / (cursor left/right)
buttons to select TIMER EDIT then press
ENTER.
VOLUME
7 Set the switch-on time.
Use the / (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
ENTER
TIMER
ENTER
SHIFT
3
4 Press TIMER (SHIFT + 6) twice to reach
the timer menu.
STANDBY/ON
DVD/CD
If you’ve selected a CD, make sure that it’s
stopped.
8 Set the switch-off time.
Use the / (cursor up/down) buttons to set
the hour, then press ENTER. Set the minute in
the same way, pressing ENTER when you’re
done.
After pressing ENTER this last time, the wakeup indicator lights, and the switch-on, switchoff times, the function (DVD/CD, etc.) and
volume are confirmed in the display.
58
En
XV-HDT330_new.book 59 ページ 2003年1月16日 木曜日 午後4時12分
08
Using the timer
9 Switch the system into standby mode.
The wake-up timer will not work if the system
is left on!
• You can check the timer settings in
standby by pressing TIMER (SHIFT + 6)
twice. (Press TIMER (SHIFT + 6) once to
display the current time.)
Setting the sleep timer
The sleep timer switches off the system after
a specified time so you can fall asleep without
worrying about it.
• If you set the sleep timer while either the
wake-up timer is active, the earlier switch
off time takes priority.
Turning the wake-up timer on/off
If the wake-up timer is on, it will switch on the
system everyday at the time you have set.
STANDBY/ON
FM/AM
DVD/CD
TUNER
L1/L2
TV
LINE
1 Press TIMER (SHIFT + 6) twice to reach
the timer menu.
2 Use the / (cursor left/right)
buttons to select WAKE-UP then press
ENTER.
3 Use the / (cursor up/down)
buttons to select TIMER ON or TIMER OFF.
• You must have the timer set (see above) to
select ON. The wake-up timer switches on
and off according to your previous
settings.
4
ENTER
Press ENTER.
TIMER
SHIFT
• The wake-up timer will automatically be
canceled if the clock is reset.
59
En
XV-HDT330_new.book 60 ページ 2003年1月16日 木曜日 午後4時12分
08
Using the timer
1 Press TIMER (SHIFT + 6) twice to reach
the timer menu.
2 Use the / (cursor left/right)
buttons to select SLEEP TIMER then press
ENTER.
3 Use the / (cursor up/down)
buttons to select a switch-off time then
press ENTER.
Choose between the following options:
• Auto – Available only in CD mode; the
system switches off automatically after
the currently playing disc has finished.
• Sleep 90 – System switches off after 90
minutes
• Sleep 60 – System switches off after an
hour
• Sleep 30 – System switches off after 30
minutes
• Off – cancels the sleep timer
4 To check how much time is left, repeat
steps 1 and 2.
The remaining time is displayed momentarily.
60
En
XV-HDT330_new.book 61 ページ 2003年1月16日 木曜日 午後4時12分
09
Surround sound setup
Chapter 9
Surround sound setup
Setting up surround sound
The Room Setup feature (page 27) is
designed to give you a basic surround sound
setup, however you can make the more
detailed settings that may improve the
surround sound in your listening room.
5 When you’re done, press ENTER to
leave the System Setup menu.
• The System Setup menu is exited
automatically after 5 minutes of inactivity.
System Setup menu options
SYSTEM SETUP
ENTER
Below are all the available settings in the
setup menu. The first setting in each section
is the default. See also the notes in each
section for additional information about the
settings.
Front speakers distance setting
Specifies the distance from your listening
position to the front speakers:
SHIFT
• Front 1 ft. ~ Front 30 ft. – Distance can
be set in increments of 1 ft. The default is
10 ft.
Center speaker distance setting
1 Press SYSTEM SETUP (SHIFT + HOME
MENU).
2 Use the / (cursor left/right)
buttons to choose the setting you want to
adjust.
The current setting is shown for each option
as you cycle through the display. See below
for a full list and description of each.
3 Use the / (cursor up/down)
buttons to adjust the setting.
4 Repeat steps 2 and 3 to make other
settings.
Specifies the distance from your listening
position to the center speaker:
• Center 1 ft. ~ Center 30 ft. – Distance
can be set in increments of 1 ft. The
default is 10 ft.
Surround speakers distance setting
Specifies the distance from your listening
position to the front speakers:
• Surr. 1 ft. ~ Surr. 30 ft. – Distance can
be set in increments of 1 ft. The default is
10 ft.
61
En
XV-HDT330_new.book 62 ページ 2003年1月16日 木曜日 午後4時12分
09
Surround sound setup
Dynamic Range Control
LFE attenuator setting
Specifies the amount of dynamic range
adjustment to Dolby Digital or DTS
soundtracks:
Dolby Digital and DTS audio sources include
ultra-low bass tones. Set the LFE attenuator
as needed to prevent the ultra-low bass from
distorting the sound.
• DRC Off – No dynamic range adjustment
(use when listening at higher volume)
• DRC Mid – Mid setting
• DRC High – Dynamic range is reduced
(loud sounds are reduced in volume while
quieter sounds are increased)
• LFE ATT 0 – The LFE channel is played
with no attenuation
• LFE ATT 10 – LFE channel is attenuated
by 10dB
• LFE Off – LFE channel is not played
Setting the channel levels
• This setting works only with Dolby Digital
and some DTS soundtracks. For other
sources you can create a similar effect
using the Midnight mode (see Using
Quiet and Midnight listening modes on
page 40).
Dual mono setting
Specifies how dual mono encoded Dolby
Digital or DTS soundtracks should be played.
You can also use this setting to switch the
audio channel on DVD-RW discs recorded
with two separate soundtracks.
• L-ch1 R-ch2 – Both channels are played
through the front speakers
You can set the relative channel levels from
your main listening position for each listening
mode, including all the Surround and
Advanced Surround modes.
If you used the Room Setup feature (page 27),
the channel levels for each listening mode
will already be set. However, you can still finetune the levels here if you need to.
1 Press SURROUND or ADVANCED
repeatedly to select a listening mode.
2 Press TEST TONE (SHIFT + 4) to hear
the test tone.
The test tone is output in the following order
(from the speakers active in the current
listening mode):
• CH1 Mono – Only channel 1 is played
• FL – Front left speaker
• CH2 Mono – Only channel 2 is played
• C – Center speaker
• FR – Front right speaker
• RS – Right surround speaker
• On the Ch1 Mono and Ch2 Mono
settings the sound comes only from the
center speaker (or from the front speakers
if listening in STEREO mode).
• This setting works only with dual mono
encoded Dolby Digital or DTS
soundtracks. See the disc packaging for
channel information.
62
En
• LS – Left surround speaker
• SW – Subwoofer
3 Use the VOLUME +/– button to adjust
the volume to an appropriate level.
XV-HDT330_new.book 63 ページ 2003年1月16日 木曜日 午後4時12分
Surround sound setup
09
4 Use the / (cursor up/down)
buttons to adjust the speaker levels in
turn.
You should hear the test tone at the same
volume from each speaker when seated in the
main listening position. The channel level
range is ± 10 dB.
5 When you’re done, press ENTER to exit
test tone setup.
• The speaker volume can be adjusted
while listening to any sound source you
want by pressing CH LEVEL (SHIFT + 5)
and then using the / (cursor up/
down) buttons to adjust the channel
levels. After you’re finished with one
channel, use the / (cursor left/right)
buttons to move to the next.
• Since the subwoofer produces ultra-low
frequencies its sound may seem quieter
than it actually is.
63
En
XV-HDT330_new.book 64 ページ 2003年1月16日 木曜日 午後4時12分
10
Video Adjust menu
Chapter 10
Video Adjust menu
Video Adjust
Creating your own presets
• Default setting: Standard
From the Video Adjust screen you can select
the standard video presentation or define
presets of your own.
1 Press HOME MENU and select ‘Video
Adjust’ from the on-screen display.
You can create up to three presets of your
own.
1 Select one of the Memory presets (see
above).
2 Press (cursor down) to select
‘Detailed Settings’ then press ENTER.
Video Adjust
HOME MENU
DVD
Memory1
Play Mode
Video Adjust
Initial Settings
Disc Navigator
Detailed Settings
3
Adjust the picture quality settings.
Memory1
Recall Settings
2 Use the / (cursor left/right)
buttons to select a preset.
Memory1
Contrast
min
max
Brightness
min
min
max
max
Chroma Level
Video Adjust
Standard
• Use the / (cursor up/down) buttons to
select a setting.
• Standard
• Memory1–2 – Use for saving your own
presets (see below)
3 Press ENTER to make the setting and
exit the Video Adjust screen.
• Depending on the disc and the TV/
monitor, you may not see the effect
clearly.
64
En
• Use the / (cursor left/right) buttons
to adjust the current setting.
• Press DISPLAY (SHIFT + 8) to switch
between full and single view.
• You can change the preset number from
the Recall Settings menu item.
XV-HDT330_new.book 65 ページ 2003年1月16日 木曜日 午後4時12分
Video Adjust menu
10
You can adjust any or all of the following
picture quality settings:
• Contrast – Adjusts the contrast between
light and dark.
• Brightness – Adjusts the overall
brightness.
• Chroma Level – Adjusts how saturated
colors appear.
4 Press ENTER to save the preset and
exit the Video Adjust screen.
65
En
XV-HDT330_new.book 66 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
Chapter 11
Initial Settings menu
Using the Initial Settings
menu
Video Output settings
The Initial Settings menu gives you complete
control in setting up your DVD system,
including video output settings and parental
lock settings, among others.
TV Screen
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
• Default setting: 4:3 (Letter Box)
Initial Settings
Video Output
Language
Display
Options
TV Screen
Component Out
S-Video Out
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
1 Press HOME MENU and select ‘Initial
Settings’ from the on-screen display.
HOME MENU
DVD
Play Mode
Video Adjust
Initial Settings
Disc Navigator
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3
Make the setting you want.
• The language options shown in the onscreen display illustrations on the
following pages may not correspond to
those available in your country or region.
66
En
If you have a widescreen TV, select the 16:9
(Wide) setting—widescreen DVD software is
then shown using the full screen area. When
playing software recorded in conventional
(4:3) format, the settings on your TV will
determine how the material is presented—
see the manual that came with your TV for
details on what options are available.
If you have a conventional TV, select either 4:3
(Letter Box) or 4:3 (Pan & Scan). In Letter
Box mode, widescreen software is shown with
black bars at the top and bottom of the
screen. Pan & Scan chops the sides off
widescreen material to make it fit the 4:3
screen (so even though the image looks
larger on the screen, you’re actually seeing
less of the picture). See also Screen sizes and
disc formats on page 83.
XV-HDT330_new.book 67 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
Component Out
You only need to make this setting if you
connected this system to your TV using the
component video outputs.
• Default setting: Interlace
Initial Settings
Video Output
Language
Display
Options
TV Screen
Component Out
S-Video Out
Progressive
Interlace
If you have a progressive-scan compatible TV,
set this to Progressive for flicker-free video
output. If your TV is not compatible with
progressive-scan video, set to Interlace.
Check the operating instructions that came
with your TV if you’re unsure about its
compatibility.
When setting to Progressive, you have to
press ENTER once more to confirm (or
RETURN to cancel). See also below for
important information on progressive scan
video.
About progressive scan video
Compared to interlace video, progressive
scan video effectively doubles the scanning
rate of the picture, resulting in a very stable,
flicker-free image. Progressive scan video is
available only from the component video
output.
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the system to progressive, you will not be
able to see any picture at all. In this case,
press STANDBY/ON to put the system
in standby, then press and hold the front
panel (stop) button for about 8 seconds
until the display shows Mem.Clr.?. Press
the front panel or button
so that the display shows Interlace?.
Press the front panel button to set to
interlace and switch the system back on.
Compatibility of this system with
progressive-scan TVs.
This system is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
“STANDARD DEFINITION” OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.
This system is compatible with the following
Pioneer displays and monitors: PDP-5030HD,
PRO-1000HD, PRO-800HD, PDP-4330HD,
PRO-720HD, PRO-620HD, PRO-520HD, SD643HDS, SD-533HDS, PDP-503HDG, PDP433HDG.
• When Component Out (above) is set to
Progressive, there is no video output
from the VIDEO and S-VIDEO jacks. If you
want to display video on more than one
monitor simultaneously, make sure that it
is set to Interlace.
67
En
XV-HDT330_new.book 68 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
S-Video Out
You only need to make this setting if you
connected this system to your TV using an
S-video cable.
• Default setting: S2
Initial Settings
Video Output
Language
Display
Options
TV Screen
Component Out
S-Video Out
S1
S2
If you find that the picture is stretched or
distorted on the default S2 setting, try
changing it to S1.
Language settings
• You can usually switch between the
languages recorded on a DVD disc during
playback using the AUDIO button. (This
does not affect this setting.) See
Switching DVD audio language on
page 51.
• Some DVD discs set the audio language
automatically when loaded, overriding the
audio language you set in the Initial
Settings menu.
• Discs with two or more audio languages
usually allow you to select the audio
language from the disc menu. Press DVD
MENU to access the disc menu.
Subtitle Language
• Default setting: English
Audio Language
Initial Settings
• Default setting: English
Video Output
Language
Display
Options
Initial Settings
Video Output
Language
Display
Options
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
English
French
German
Italian
Spanish
Other Language
This setting is your preferred audio language
for DVD discs. If the language you specify
here is recorded on a disc, the system
automatically plays the disc in that language.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 83.
68
En
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
English
French
German
Italian
Spanish
Other Language
This setting is your preferred subtitle
language for DVD discs. If the language you
specify here is recorded on a disc, the system
automatically plays the disc with those
subtitles.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 83.
XV-HDT330_new.book 69 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
Subtitle Display
• Default setting: On
• You can usually change or switch off the
subtitles on a DVD disc during playback
using the SUBTITLE button. (This does not
affect this setting.) See Switching DVD
audio language on page 51.
• Some DVD discs set the subtitle language
automatically when loaded, overriding the
subtitle language you set in the Initial
Settings menu.
• Discs with two or more subtitle
languages usually allow you to select the
subtitle language from the disc menu.
Press DVD MENU to access the disc
menu.
Initial Settings
Video Output
Language
Display
Options
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
On
Off
When set to On, the system displays subtitles
according to the Subtitle Language setting.
Set to Off to switch subtitles off altogether.
Display settings
OSD Language
DVD Menu Language
• Default setting: w/Subtitle Lang.
• Default setting: English
Initial Settings
Initial Settings
Video Output
Language
Display
Options
Audio Language
Subtitle Language
DVD Menu Lang.
Subtitle Display
w/Subtitle Lang.
English
French
German
Italian
Spanish
Other Language
Some multilingual discs have disc menus in
several languages. This setting specifies in
which language the disc menus should
appear. Leave on the default setting for
menus to appear in the same language as the
Subtitle Language setting—see above.
The DVD format recognizes 136 different
languages. Select Other Language if you
want to specify a language other than those
listed. See also Selecting languages using the
language code list on page 83.
Video Output
Language
Display
Options
OSD Language
On Screen Display
Angle Indicator
English
français
Deutsch
Italiano
Español
This sets the language of this system’s onscreen displays.
On Screen Display
• Default setting: On
Initial Settings
Video Output
Language
Display
Options
OSD Language
On Screen Display
Angle Indicator
On
Off
69
En
XV-HDT330_new.book 70 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
This sets whether operation displays are
shown on-screen (Play, Resume, Scan and so
on.) Note that when set to Off, you won’t be
able to display disc information on-screen.
• Not all discs that you may consider
inappropriate for your children use the
Parental Lock feature. These discs will
always play without requiring the
password first.
Angle Indicator
• Default setting: On
• If you forget your password, you’ll need to
reset the system to its factory settings
(see Resetting the system on page 74),
then register a new password.
Initial Settings
Video Output
Language
Display
Options
OSD Language
On Screen Display
Angle Indicator
On
Off
If you prefer not to see the camera icon onscreen during multi-angle scenes on DVD
discs, change this setting to Off.
Registering a new password
You must register a password before you can
change the Parental Lock level or enter a
Country Code.
1
Select ‘Password’.
Initial Settings
Options
Parental Lock
Video Output
Language
Display
Options
Parental Lock
PhotoViewer
Password
Level Change
Country Code
• Default level: Off
• Default password: none
• Default country code: us (2119)
Some DVD Video discs feature a Parental
Lock level. If the player is set to a lower level
than the disc, the disc won’t play. This gives
you some control about what your children
watch on your DVD system.
Some discs also support the Country Code
feature. Certain scenes on these discs will not
be played, depending on the country code you
set.
Before you can set the Parental Lock level or
the Country Code you must register a
password. As the password owner, you can
change the Parental Lock level or Country
Code whenever you like. You can also change
the password.
70
En
2 Use the number buttons to enter a 4digit password.
Initial Settings
Video Output
Language
Display
Options
Parental Lock: Register Code Number
* * * *
The numbers you enter show up as asterisks
(*) on-screen.
XV-HDT330_new.book 71 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
3 Press ENTER to register the password
and return to the Options menu screen.
If you forget your password, you can reset the
system then register a new one. See Resetting
the system on page 74 for how to reset the
system.
4 Press ENTER to register the new
password and return to the Options menu
screen.
Setting/changing the Parental Lock level
1
Select ‘Level Change’.
Changing your password
Initial Settings
To change your password, confirm your
existing password then enter a new one.
1
Video Output
Language
Display
Options
Select ‘Password Change’.
Parental Lock
PhotoViewer
Password Change
Level Change
Country Code
Initial Settings
Video Output
Language
Display
Options
Parental Lock
PhotoViewer
Password Change
Level Change
Country Code
2 Use number buttons to enter your
password, then press ENTER.
Initial Settings
Video Output
Language
Display
Options
2 Use the number buttons to enter your
existing password, then press ENTER.
The numbers appear as asterisks as you enter
them.
Initial Settings
Video Output
Language
Display
Options
* * * *
3
Select a new level.
Parental Lock: Password Change
Password
* * * *
Initial Settings
New Password
Enter a new password.
Parental Lock : Level Change
Password
* * * *
1 2 3 4 5 6 7 8 off
Initial Settings
Video Output
Language
Display
Options
Password
1 2 3 4 5 6 7 8 off
Video Output
Language
Display
Options
3
Parental Lock : Level Change
Parental Lock: Password Change
Password
* * * *
New Password
* * * *
Press (cursor left) repeatedly to lock more
levels (more discs will require the password);
press (cursor right) to unlock levels. You
can’t lock level 1.
4 Press ENTER to set the new level and
return to the Options menu screen.
71
En
XV-HDT330_new.book 72 ページ 2003年1月16日 木曜日 午後4時12分
11
Initial Settings menu
Setting/changing the Country Code
Initial Settings
You may also want to refer to the Country code
list on page 84.
1
Video Output
Language
Display
Options
Select ‘Country Code’.
Parental Lock: Country Code
* * * *
Password
Country Code List
Code
us
2 1 1 9
Initial Settings
Video Output
Language
Display
Options
Parental Lock
PhotoViewer
Password Change
Level Change
Country Code
4 Press ENTER to set the new Country
Code and return to the Options menu
screen.
2 Use number buttons to enter your
password, then press ENTER.
• Changing the country code does not take
effect until the next disc is loaded (or the
current disc is reloaded).
Initial Settings
Video Output
Language
Display
Options
Parental Lock: Country Code
Password
* * * *
Country Code List
Code
us
2 1 1 9
PhotoViewer
•
Default setting: On
Initial Settings
3 Select a country code.
There are two ways you can do this.
• Select by code letter: Use / (cursor
up/down) to change the country code.
Initial Settings
Video Output
Language
Display
Options
Parental Lock: Country Code
Password
* * * *
Country Code List
Code
us
2 1 1 9
• Select by code number: Press (cursor
right) then use the number buttons to
enter the 4-digit country code (you can
find the Country code list on page 84.)
72
En
Video Output
Language
Display
Options
Parental Lock
PhotoViewer
On
Off
This setting is important if you load a disc that
contains both WMA/MP3 audio files and
JPEG picture files.
The default On setting allows you to view only
the JPEG files on this kind of disc. Set to Off
to be able to play the WMA/MP3 audio files.
Note that when this setting is changed, discs
already loaded (other than in the play
position) that contain both WMA/MP3 audio
files and JPEG picture files will show up as
??? in the Disc Navigator and program list
screens until they are reloaded.
XV-HDT330_new.book 73 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Chapter 12
Additional information
Switching off the demo
• Default setting: Demo On
This system has an automatic demo feature
that starts when the system is plugged in for
the first time.
1
Switch the system into standby.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
Switch the system into standby.
3 Use the / (cursor left/right)
buttons to select ‘Child Lock?’, then press
ENTER.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
4 Use the / (cursor up/down)
buttons to select ‘Lock On?’ or ‘Lock Off?’.
3 Use the / (cursor left/right)
buttons to select ‘Demo MODE?’, then
press ENTER.
5
1
4 Use the / (cursor up/down)
buttons to select ‘Demo Off?’ (or ‘Demo
On?’) then press ENTER to confirm.
Changing the clock format
• Default setting: 12–Hour
You can choose to display the clock in either
12 or 24 hour formats.
1
• After setting the clock, the demo mode
switches off automatically. However, if
you unplug the system from the wall
outlet, the demo mode will revert to Demo
On (and the clock will be reset).
Child Lock
• Default setting: Lock Off
This system has a child lock feature that
makes the front panel buttons and controls
inoperative. This is useful when you’ve set the
wake-up timer and don’t want the system
switched on before it activates.
Press ENTER to confirm.
Switch the system into standby.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the / (cursor left/right)
buttons to select ‘12/24 Hour?’, then press
ENTER.
4 Use the / (cursor up/down)
buttons to select either ‘12-Hour?’ or ‘24Hour?’.
5
Press ENTER to confirm.
Changing the frequency step
• Default setting: FM100 AM 10
If you find that you can’t tune into stations
successfully, the frequency step may not be
suitable for your country/region.
73
En
XV-HDT330_new.book 74 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
4 Use the / (cursor up/down)
buttons to select ‘FM 50 AM 9?’ or ‘FM100
AM10?’ then press ENTER to confirm.
Resetting the system
Use this procedure to reset all system
settings to the factory default.
1
Switch the system into standby.
2 Press and hold the front panel (stop)
button for about 8 seconds until the
display shows ‘Mem.Clr.?’.
3 Press the from panel button.
All the system’s settings are now reset, and
you should see the ‘Let’s Get Started’ screen.
Folder A
Track 1
Track 2
Track 3
Folder B
Folder C
Track 1
File 1
.jpg
.jpg
.mp3
3 Use the / (cursor left/right)
buttons to select ‘FM AM STEP?’, then
press ENTER.
.mp3
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
CD-ROMs contain folders and files. MP3 and
WMA files are referred to as tracks. Folders
may contain further folders.
.mp3
Switch the system into standby.
.mp3
1
File 2
DVD Video regions
All DVD Video discs carry a region mark on
the case somewhere that indicates which
region(s) of the world the disc is compatible
with. Your DVD system also has a region
mark, which you can find on the rear panel.
Discs from incompatible regions will not play
in this system. Discs marked ALL will play in
any player.
The diagram below shows the various DVD
regions of the world.
Using and taking care of discs
Titles, chapters and tracks
DVD discs are generally divided into one or
more titles. Titles may be further subdivided
into chapters.
Title 1
Title 2
Title 3
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 1 Chapter 2
CDs and Video CDs are divided into tracks.
Track 1
74
En
Track 2
Track 3 Track 4
Track 5
Track 6
Handling discs
When holding discs of any type, take care not
to leave fingerprints, dirt or scratches on the
disc surface. Hold the disc by its edge or by
the center hole and edge.
Damaged or dirty discs can affect playback
performance. Take care also not to scratch
the label side of the disc. Although not as
fragile as the recorded side, scratches can
still result in a disc becoming unusable.
XV-HDT330_new.book 75 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Should a disc become marked with
fingerprints, dust, etc., clean using a soft, dry
cloth, wiping the disc lightly from the center
to the outside edge as shown in the diagram
below.
For more detailed care information see the
instructions that come with discs.
Do not load more than one disc into the player
at a time.
Discs to avoid
Wipe lightly from the center of the disc using
straight strokes.
Don’t wipe the disc surface using circular
strokes.
If necessary, use a cloth soaked in alcohol, or
a commercially available CD/DVD cleaning kit
to clean a disc more thoroughly. Never use
benzine, thinner or other cleaning agents,
including products designed for cleaning
vinyl records.
Discs spin at high speed inside the player. If
you can see that a disc is cracked, chipped,
warped, or otherwise damaged, don't risk
using it—you could end up damaging the
player.
This system is designed for use with
conventional, fully circular discs only. Use of
shaped discs is not recommended for this
product. Pioneer disclaims all liability arising
in connection with the use of shaped discs.
Proper installation and
maintenance of this system
Storing discs
Although CDs and DVD discs are more
durable than vinyl records, you should still
take care to handle and store discs correctly.
When you're not using a disc, return it to its
case and store upright. Avoid leaving discs in
excessively cold, humid, or hot environments
(including under direct sunlight).
Don't glue paper or put stickers onto the disc,
or use a pencil, ball-point pen or other sharptipped writing instrument. These could all
damage the disc.
Hints on installation
We want you to enjoy using this system for
years to come, so please bear in mind the
following points when choosing a suitable
location for it:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such
as a table, shelf or stereo rack.
Don’t...
Use in a place exposed to high
temperatures or humidity, including near
radiators and other heat-generating
appliances.
75
En
XV-HDT330_new.book 76 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Place on a window sill or other place
where the system will be exposed to direct
sunlight.
Use in an excessively dusty or damp
environment.
Place directly on top of an amplifier, or
other component in your stereo system
that becomes hot in use.
Use near a television or monitor as you
may experience interference—especially
if the television uses an indoor antenna.
Use in a kitchen or other room where the
system may be exposed to smoke or
steam.
Use on a thick rug or carpet, or cover with
cloth—this may prevent proper cooling of
the system unit.
Place on an unstable surface, or one that
is not large enough to support all four of
the system unit’s feet.
Cleaning the pickup lens
The DVD player’s lens should not become
dirty in normal use, but if for some reason it
should malfunction due to dust or dirt,
consult your nearest Pioneer authorized
service center. Although lens cleaners are
commercially available, we do not
recommend using them since some may
damage the lens.
Problems with condensation
Condensation may form inside the system
unit if it is brought into a warm room from
outside, or if the temperature of the room
rises quickly. Although the condensation
won’t damage the system, it may temporarily
impair its performance. For this reason you
should leave it to adjust to the warmer
temperature for about an hour before
switching on and using.
76
En
Moving the system unit
If you need to move the main system unit, first
remove all discs, then press STANDBY/ON
on the front panel to turn the system off. Wait
for Good Bye to disappear from the display,
then unplug the power cable. Never lift or
move the system unit during playback—discs
rotate at a high speed and may be damaged.
• Unplugging the system before Good Bye
disappears from the display may cause
the system to return to the factory
settings.
Power cable caution
Handle the power cable by the plug part. Do
not pull out the plug by tugging the cable, and
never touch the power cable when your hands
are wet, as this could cause a short circuit or
electric shock. Do not place the system unit,
a piece of furniture, or other object on the
power cable or pinch the cable in any other
way. Never make a knot in the cable or tie it
with other cables. The power cable should be
routed so that they are not likely to be stepped
on. A damaged power cable can cause a fire
or give you an electric shock. Check the power
cable once in a while. If you find it damaged,
ask your nearest Pioneer authorized service
center or your dealer for a replacement.
XV-HDT330_new.book 77 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Connecting external antennas
Connecting auxiliary
components
External AM antenna
This system has both stereo analog inputs
and outputs, as well as a coaxial digital input.
Use these to connect external components,
such as your VCR, MD or CD-R recorder.
Use 5–6 meters (15–18 feet) of vinyl-insulated
wire and set up either indoors or outdoors.
Leave the AM loop antenna connected.
Outdoor antenna
Tape deck, etc.
ANTENNA
Indoor
antenna
(vinyl-coated
wire)
FM
UNBAL
75
AM LOOP
ANTENNA
AUDIO
INPUT
AUDIO
OUTPUT
15–18 ft. / 5–6m
External FM antenna
Use 75Ω coaxial cable to hook up an external
FM antenna.
ANTENNA
75Ω coaxial cable
AUDIO
OUT
IN
COAXIAL IN
L
LINE 2
ANTENNA
L
R
AM LOOP
ANTENNA
R
LINE 1
FM
UNBAL
75
FM
UNBAL
75
IN
TV
XV–HTD 330
AM LOOP
ANTENNA
• Connect the LINE 1 (IN) jacks to the
analog outputs of an external playback
component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables. See also Reducing the TV and
line signal levels below.
• Connect the LINE 1 (OUT) jacks to the
analog inputs of an external recording
component.
These include components such as a
cassette deck, VCR, MD or another recorder
with analog inputs. Connect using RCA pinplug stereo cables.
77
En
XV-HDT330_new.book 78 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
• Connect the COAX IN (LINE 2) jack on
the rear panel to the coaxial digital output
of an external playback component.
COA
XIA
L IN
LIN
E2
These include digital components such as an
MD player, digital satellite, or a game system.
Connect using a coaxial digital cable (not
supplied).
Reducing the TV and line signal
levels
• Default setting: ATT 6dB
Some sources may produce a high signal
level which may produce unpleasant
distortion from the speakers. In such cases,
you may need to reduce the signal level of the
auxiliary source (connected to the TV or LINE
1 analog inputs) by switching on the
attenuator.
1
Switch the system into standby.
2 Press SYSTEM SETUP (SHIFT + HOME
MENU).
3 Use the / (cursor left/right)
buttons to select ‘TV ATT ?’ or ‘LINE1
ATT?’, then press ENTER.
4 Use the / (cursor up/down)
buttons to select ‘ATT OFF’, ‘ATT 6dB’ or
‘ATT 10dB’.
If the ATT 6dB setting still results in distorted
sound, try the ATT 10dB setting.
5
78
En
Press ENTER to confirm.
Recording mode
The Recording mode allows you to make
analog recordings from the LINE 1 (OUT)
jacks.
When Recording mode is on, most soundrelated functions (including SURROUND,
ADVANCED, AUTO, SYSTEM SETUP)
become inactive. The display will briefly blink
RecMode On if you try and use a prohibited
function while Recording mode is on.
When Recording mode is off, the audio from
the analog output may be interrupted,
depending on the operation.
1
Press SOUND MODE.
2 Use the Use the / (cursor left/
right) buttons to select ‘Rec Mode?’.
3
Press ENTER.
4 Use the / (cursor up/down)
buttons to select ‘R.Mode On’ or ‘R.Mode
Off’.
XV-HDT330_new.book 79 ページ 2003年1月16日 木曜日 午後4時12分
Additional information
12
Troubleshooting
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie
in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest
Pioneer authorized service center or your dealer to carry out repair work.
• If the system does not operate normally due to external effects such as static electricity
disconnect the power plug from the outlet and insert again to return to normal operating
conditions.
General
Problem
Remedy
The power does not turn on. • Connect the power plug to the wall outlet.
• Disconnect the power plug from the outlet, and insert again.
• Make sure there are no loose strands of speaker wire touching the
rear panel. This could cause the system to shut off automatically.
No sound is output when a
function is selected.
• If you’re using the line input, make sure the component is
connected correctly (see Connecting auxiliary components on
page 77).
• Press MUTE on the remote control to turn muting off.
• Adjust the VOLUME.
No image is output when
playing discs.
• Make sure the TV is connected correctly (see Connecting to your TV
on page 16).
• Reset the video output to interlace (see Connecting to your TV on
page 16
No sound from surround or • Refer to Setting the channel levels on page 62 to check the speaker
center speakers.
levels.
• Check that you haven’t selected the STEREO sound mode (see
Listening in stereo on page 38).
• Check that the Virtual Advanced Surround mode is not on (see
Using the Advanced Surround effects on page 39).
• Connect the speakers properly (see Connecting the speakers on
page 13).
79
En
XV-HDT330_new.book 80 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Problem
Remedy
Can’t operate the remote
control.
• Replace the batteries (see Putting the batteries in the remote control
on page 9).
• Operate within 23 ft. / 7 m, 30° of the remote sensor on the front
panel (see Using the remote control on page 9).
• Remove any obstacles or operate from another position.
• Avoid exposing the remote sensor on the front panel to direct light.
Timer indicator is blinking
and the system will not
switch on.
• Unplug the system, then plug back in. Wait for one minute then
switch on.
• Make sure the fan at the rear of the system unit is not being
blocked.
• Check that the speakers are connected correctly.
• Make sure the voltage of the mains power source is correct for the
model.
• If the problem persists, take it to your nearest Pioneer
authorized service center or your dealer for servicing.
DVD/CD/Video CD player
Problem
Remedy
The disc is ejected
• Clean the disc.
automatically after loading. • Align the disc properly in the disc guide.
• If the region number on a DVD-video disc does not match the
number on the system unit, the disc cannot be used (see DVD Video
regions on page 74).
• Allow time for any condensation inside the system unit to evaporate.
Avoid using the system near an air-conditioning unit.
Playback is not possible.
• If the disc is loaded upside down, reload the disc with the label side
face up.
Picture playback stops and • Press (stop), then (play) to start playback again.
the operation buttons
• Switch the power off once, then on again using the front panel
cannot be used.
STANDBY/ON button.
80
En
Settings are canceled.
• When the power is cut due to power failure or by unplugging the
power cable, settings will be canceled.
No picture/No color.
• Check that connections are correct and that plugs are inserted fully.
• Check the instruction manual of the TV/monitor to make sure the
TV/monitor settings are incorrect.
Screen is stretched or
aspect does not change.
• The TV Screen setting is incorrect. Set the TV Screen option to
match the TV/monitor you're using (see TV Screen on page 66).
XV-HDT330_new.book 81 ページ 2003年1月16日 木曜日 午後4時12分
Additional information
Problem
12
Remedy
When recorded on a VCR or • This system uses copy-protection technology which may prevent
passed through an AV
recording or cause picture problems when connected through a VCR
selector, there is
or AV selector. This is not a malfunction.
disturbance in the playback
picture.
Picture disturbance during
playback or dark.
• This system is compatible with Macro-Vision System copy guard.
Some discs include a copy prevention signal, and when this type of
disc is played back, stripes etc., may appear on some sections of the
picture depending on the TV. This is not a malfunction.
• Discs respond differently to particular system functions. This may
result in the screen becoming black for a brief instant or shaking
slightly when the function is executed. These problems are largely due
to differences between discs and disc content and are not
malfunctions of this system.
Noticeable difference in
DVD and CD volume.
• DVDs and CDs use different recording methods. This is not a
malfunction.
WMA/MP3/JPEG discs
Problem
Remedy
CD-ROM disc is not
recognized by the system.
• Make sure that the CD-ROM was recorded using the ISO 9660 disc
format. See Disc / content format playback compatibility on page 10 for
other disc compatibility information.
Files don’t show up in the
Disc Navigator/Photo
Browser.
• The files on the disc must be named with the correct file extention:
.mp3 for MP3 files; .wma for WMA files; .jpg for JPEG files (upper or
lower-case is OK). See Disc / content format playback compatibility on
page 10 for other disc compatibility information.
JPEG files appear, but MP3 • Set the PhotoViewer menu option in the Initial Settings menu to Off
and WMA files don’t show to be able to access the WMA/MP3 files. See PhotoViewer on page 72.
up.
Tuner
Problem
Remedy
Auto tuning does not pick
up some stations.
• The radio signal is weak. Auto tuning will only detect radio stations
with a good signal. For more sensitive tuning, connect an outdoor
antenna.
81
En
XV-HDT330_new.book 82 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Problem
Remedy
Sound is mono only.
• Check that the tuner is not set to FM mono (see Improving poor FM
reception on page 35).
Considerable noise in radio • Tune into the correct frequency.
broadcasts.
• Connect the antenna (see Connecting the supplied antennas on
page 18 and Connecting external antennas on page 77).
• Fully extend the FM wire antenna, position for best reception, and
secure to a wall.
• Connect an outdoor FM antenna (see Connecting external antennas
on page 77).
• Adjust the direction and position for best reception.
• Connect an additional internal or external AM antenna (see AM loop
antenna on page 18 and Connecting external antennas on page 77).
• Turn off any other equipment that may be causing the noise or move
it away from the system unit.
• The tuning interval is incorrect for your country or region. Try
switching the tuning interval (frequency step) (see Changing the
frequency step on page 73).
Error Messages
82
En
Message
Desciption
Child Lock
• This message appears when the front panel buttons are pressed
when the child lock feature is active. See Child Lock on page 73 for
more on switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited
because the Recording Mode is on (see Recording mode on page 78).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited
because headphones are connected.
96K Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited
because the source is digital 88.2 or 96kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited
because there is no surround speaker output.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited
because the sound is muted (see Muting the sound on page 41).
Exit
• Appears briefly when a menu is automatically exited after a set
period of inactivity.
XV-HDT330_new.book 83 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Screen sizes and disc formats
DVD-Video discs come in several different
screen aspects, ranging from TV programs,
which are generally 4:3, to CinemaScope
widescreen movies, with an aspect ratio of up
to about 7:3.
Set to 4:3 (Pan&Scan), widescreen discs are
shown with the left and right sides cropped.
Although the picture looks larger, you don’t
actually see the whole picture.
Televisions also come in different aspect
ratios; ‘standard’ 4:3 and widescreen 16:9.
Widescreen TV users
If you have a widescreen TV, the TV Screen
setting (page 66) of this system should be set
to 16:9 (Wide).
Please note that many widescreen discs
override the system’s settings so that the disc
is shown in letterbox format regardless of the
setting.
When you watch discs recorded in 4:3 format,
you can use the TV controls to select how the
picture is presented. Your TV may offer
various zoom and stretch options; see the
instructions that came with your TV for
details.
Please note that some movie aspect ratios are
wider than 16:9, so even though you have a
widescreen TV, these discs will still play in a
‘letterbox’ style with black bars at the top and
bottom of the screen.
Standard TV users
If you have a standard TV, the TV Screen
setting (page 66) of this system should be set
to 4:3 (Letter Box) or 4:3 (Pan&Scan),
depending on which you prefer.
Set to 4:3 (Letter Box), widescreen discs are
shown with black bars top and bottom.
• Using the 16:9 (Wide) setting with a
standard 4:3 TV, or either of the 4:3
settings with a widescreen TV, will result
in a distorted picture.
Selecting languages using the
language code list
Some of the language options (such as ‘DVD
Language’ in the Setup Navigator) allow you
to set your prefered language from any of the
136 languages listed in the Language code list
on page 84.
1
Select ‘Other Language’.
2 Use the / (cursor left/right)
buttons to select either a code letter or a
code number.
3 Use the / (cursor up/down)
buttons to select a code letter or a code
number.
See Language code list on page 84 for a
complete list of languages and codes.
83
En
XV-HDT330_new.book 84 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Language code list
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
German (de), 0405
Italian (it), 0920
Spanish (es), 0519
Dutch (nl), 1412
Russian (ru), 1821
Chinese (zh), 2608
Korean (ko), 1115
Greek (el), 0512
Afar (aa), 0101
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Welsh (cy), 0325
Danish (da), 0401
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Fiji (fj), 0610
Faroese (fo), 0615
Frisian (fy), 0625
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Kirghiz (ky), 1125
Latin (la), 1201
Lingala (ln), 1214
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Malagasy (mg), 1307
Maori (mi), 1309
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Nepali (ne), 1405
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Portuguese (pt), 1620
Quechua (qu), 1721
Rhaeto-Romance (rm),
1813
Kirundi (rn), 1814
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swedish (sv), 1922
Swahili (sw), 1923
Tamil (ta), 2001
Telugu (te), 2005
Tajik (tg), 2007
Thai (th), 2008
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Twi (tw), 2023
Ukrainian (uk), 2111
Urdu (ur), 2118
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Mexico, 1324, mx
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Russian Federation, 1821,
ru
Singapore, 1907, sg
Spain, 0519, es
Switzerland, 0308, ch
Sweden, 1905, se
Taiwan, 2023, tw
Thailand, 2008, th
United Kingdom, 0702, gb
United States of America,
2119, us
Country code list
Country, Country code, Country code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Canada, 0301, ca
Chile, 0312, cl
China, 0314, cn
Denmark, 0411, dk
Finland, 0609, fi
84
En
France, 0618, fr
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Indonesia, 0904, id
Italy, 0920, it
Japan, 1016, jp
Korea, Republic of, 1118,
kr
Malaysia, 1325, my
XV-HDT330_new.book 85 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
Glossary
Analog audio
An electrical signal that directly represents
sound. Compare this to digital audio which
can be an electrical signal, but is an indirect
representation of sound. See also Digital
audio.
DRM
DRM (Digital Rights Management) is a type of
server software developed to enable secure
distribution of paid content over the Web,
recently incorporated by WMA (Windows
Media Audio).
DTS
R
Aspect ratio
The width of a TV screen relative to its height.
Conventional TVs are 4:3 (in other words, the
screen is almost square); widescreen models
are 16:9 (the screen is almost twice as wide as
it is high).
DTS stands for Digital Theater System. DTS is
a surround system different from Dolby
Digital that has become a popular surround
sound format for movies.
Dynamic range
Digital audio
An indirect representation of sound by
numbers. During recording, the sound is
measured at discrete intervals (44,100 times a
second for CD audio) by an analog-to-digital
converter, generating a stream of numbers.
On playback, a digital-to-analog converter
generates an analog signal based on these
numbers. See also Sampling frequency and
Analog audio.
Dolby Digital / Pro Logic II
Dolby Digital uses up to 5.1 discrete channels
of audio for surround sound. The front, center
and surround channels are full range, while a
Low Frequency Effects channel delivers bass
sounds often used for sound effects (hence
5.1 channels).
Dolby Pro Logic II is a matrix decoding system
that extracts 4.1 (Dolby Pro Logic) or 5.1
(Dolby Pro Logic II) channel surround sound
from a two channel source.
The difference between the quietest and
loudest sounds possible in an audio signal
(without distorting or getting lost in noise).
Dolby Digital and DTS soundtracks are
capable of a very wide dynamic range,
delivering dramatic cinema-like effects.
EXIF (Exchangeable Image File)
A file format developed by Fuji Photo Film for
digital still cameras. Digital cameras from
various manufacturers use this compressed
file format which carries date, time and
thumbnail information, as well as the picture
data.
File extension
A tag added to the end of a filename to
indicate the type of file. For example, “.mp3”
indicates an MP3 file.
ISO 9660
International standard for the volume and file
structure of CD-ROM discs.
85
En
XV-HDT330_new.book 86 ページ 2003年1月16日 木曜日 午後4時12分
12
Additional information
JPEG
Regions (DVD-Video only)
A file format used for still images, such as
photographs and illustrations. JPEG files are
identified by the file extension “.jpg” or “.JPG”.
Most digital cameras use this format.
These associate discs and players with
particular areas of the world. This system will
only play discs that have compatible region
codes. You can find the region code of your
system by looking on the rear panel. Some
discs are compatible with more than one
region (or all regions).
MP3
MP3 (MPEG1 audio layer 3) is a compressed
audio file format. Files are recognized by their
file extension “.mp3” or “.MP3”.
MPEG audio
An audio format used on Video CDs and some
DVD discs. This system can convert MPEG
audio to PCM format for wider compatibility
with digital recorders and AV amplifiers. See
also PCM.
MPEG video
The video format used for Video CDs and
DVDs. Video CD uses the older MPEG-1
standard, while DVD uses the newer and
much better quality MPEG-2 standard.
PCM (Pulse Code Modulation)
The most common system of encoding digital
audio, found on CDs and DAT. Excellent
quality, but requires a lot of data compared to
formats such as Dolby Digital and MPEG
audio. See also Digital audio.
PBC (PlayBack Control) (Video CD only)
A system of navigating a Video CD through
on-screen menus recorded onto the disc.
Especially good for discs that you would
normally not watch from beginning to end all
at once—karaoke discs, for example.
86
En
Sampling frequency
The rate at which sound is measured to be
turned into digital audio data. The higher the
rate, the better the sound quality, but the
more digital information is generated.
Standard CD audio has a sampling frequency
of 44.1kHz, which means 44,100 samples
(measurements) per second. See also Digital
audio.
WMA
WMA is short for Windows Media Audio and
refers to an audio compression technology
developed by Microsoft Corporation. WMA
data can be encoded by using Windows
Media Player version 8 or Windows Media
Player for Windows XP. Files are recognized
by their file extension “.wma” or “.WMA”.
Microsoft, Windows Media, and the Windows
logo are trademarks, or registered
trademarks of Microsoft Corporation in the
United States and/or other countries.
12_additional_information.fm 87 ページ 2003年1月16日 木曜日 午後4時33分
12
Additional information
Specifications
Amplifier section
Continuous Power Output (RMS):
Front, center, surround . . . . . .75 W per channel
(1 kHz, 10 % T.H.D., 6 Ω)
Subwoofer . . . . 75 W (100 Hz, 10 % T.H.D., 6 Ω)
Continuous Power Output :
Front, center, surround . . . . . .62 W per channel
(1 kHz, 1 % T.H.D., 6 Ω)
Subwoofer . . . . . 62 W (100 Hz, 1 % T.H.D., 6 Ω)
Disc section
Digital audio
characteristics . . . . . . . . DVD fs: 96 kHz, 24-bit
Type. . . . . . . DVD system, video CD system and
compact disc digital audio system
Frequency response . . . . . . . . . . 4 Hz to 44 kHz
Wow and Flutter. . . . . . . . Limit of measurement
(±0.001 % W.PEAK) or less (JEITA)
FM tuner section
Frequency range . . . . . . . . . . . . .87.5 – 108 MHz
Antenna . . . . . . . . . . . . . . . . . 75 Ω, unbalanced
AM tuner section
Frequency range
With 9 kHz step . . . . . . . . . 531 kHz to 1,602 kHz
With 10 kHz step . . . . . . . . 530 kHz to 1,700 kHz
Antenna . . . . . . . . . . . . . . . . . . . . . Loop antenna
Miscellaneous
Power requirements . . . . . . . . . AC 120 V, 60 Hz
Power consumption . . . . . . . . . . . . . . . . . 175 W
Power consumption in standby . . . . . . . . 0.39 W
Dimensions . . .420 (W) x 125 (H) x 448 (D) mm/
16 9/16 (W) x 4 15/16 (H) x 17 5/8 (D) in.
Weight . . . . . . . . . . . . . . . . . .9.8 kg / 21 lb. 10 oz
Accessories (DVD/CD receiver)
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . 1
AA/R6P dry cell batteries . . . . . . . . . . . . . . . . . . 2
Video cable (yellow plugs) . . . . . . . . . . . . . . . . . 1
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . 1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Power cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating instructions . . . . . . . . . . . . . . . . . . . . 1
Warranty Card. . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Speaker System
Front speakers
Enclosure . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . . . . . . . . 2-way system
Speakers
Woofer . . . . . . . . . . . . . . . . . 10 cm cone type
Tweeter . . . . . . . . . . . . . . . . .5.2 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 60 Hz to 20 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 100 W
Dimensions . . . .145 (W) x 235 (H) x 204 (D) mm
5 11/16 (W) x 9 1/4 (H) x 8 1/16 (D) in.
Weight . . . . . . . . . . . . . . . . . . . . . . 2 kg / 4 lb 7 oz
Center speaker
Enclosure . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . .8.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . .8.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 70 Hz to 20 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 100 W
Dimensions . . . . 310 (W) x 110 (H) x 85 (D) mm/
12 3/16 (W) x 4 5/16 (H) x 3 3/8 (D) in.
Weight . . . . . . . . . . . . . . . . . . . . . . 1 kg / 2 lb 3 oz
87
En
12_additional_information.fm 88 ページ 2003年1月16日 木曜日 午後4時33分
12
Additional information
Surround speakers
Accessories (Speaker system)
Enclosure . . . . . . . . . Closed-box bookshelf type
(magnetically shielded)
System . . . . . . . . . . . . . . . . .8.7 cm 1-way system
Speakers . . . . . . . . . . . . . . . . . .8.7 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . 90 Hz to 20 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 100 W
Dimensions . . . . 110 (W) x 155 (H) x 82 (D) mm/
4 5/16 (W) x 6 1/8 (H) x 3 1/4 (D) in.
Weight . . . . . . . . . . . . . . . . . . . 0.8 kg / 1 lb 12 oz
Speaker cables. . . . . . . . . . . . . . . . . . . . . . . . . . .6
non-skid pads. . . . . . . . . . . . . . . . . . . . . . 1 sheet
Subwoofer
Enclosure . . . . . . . . . . . . . Bass-reflex floor type
System . . . . . . . . . . . . . . . . . 16 cm 1-way system
Speaker . . . . . . . . . . . . . . . . . . . 16 cm cone type
Nominal impedance. . . . . . . . . . . . . . . . . . . . 6 Ω
Frequency range . . . . . . . . . . . . . 35 Hz to 2 kHz
Maximum Input Power. . . . . . . . . . . . . . . . 100 W
Dimensions . . . 190 (W) x 360 (H) x 327 (D) mm/
7 1/2 (W) x 14 3/16 (H) x 12 7/8 (D) in.
Weight . . . . . . . . . . . . . . . . . . . 5.0 kg / 11 lb 0 oz
88
En
• Specifications and design subject to
possible modification without notice, due
to improvements.
This product includes FontAvenue® fonts
licenced by NEC corporation. FontAvenue is a
registered trademark of NEC Corporation.
12_additional_information.fm 89 ページ 2003年1月16日 木曜日 午後4時33分
12_additional_information.fm 90 ページ 2003年1月16日 木曜日 午後4時33分
12
90
En
Additional information
12_additional_information.fm 91 ページ 2003年1月16日 木曜日 午後4時33分
Additional information
12
91
En
XV-HDT330_new.book 92 ページ 2003年1月16日 木曜日 午後4時12分
PIONEER CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC.
P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404
PIONEER ELECTRONICS OF CANADA, INC.
300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: (905) 479-4411
PIONEER EUROPE NV
Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.
253 Alexandra Road, #04-01, Singapore 159936 TEL: 656-472-1111
PIONEER ELECTRONICS AUSTRALIA PTY. LTD.
178-184 Boundary Road, Braeside, Victoria 3195, Australia, TEL: (03) 9586-6300
PIONEER ELECTRONICS DE MEXICO S.A. DE C.V.
Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico,D.F. 11000 TEL: 55-9178-4270
K002E
<TPTZZ/02D00001>
Printed in Malaysia
<ARB7283-A>