Zapp Z030 Technical information

Add to my manuals
24 Pages

advertisement

Zapp Z030 Technical information | Manualzz
Z030
Z030
Contents
Caution for Safety……………………………………………………………………
Package Includes… …………………………………………………………………
Overview of the Z030… ……………………………………………………………
Introduction……………………………………………………………………………
Installing and Configuring the ZO30… …………………………………………
1. Notebook PC System Requirements… …………………………………………
2. Installing the Z030 Manager onto Notebook PCs (Windows 2000 and XP)
3. Z030 Card Insertion and Device Initialization… ………………………………
Using Z030 Manager…………………………………………………………………
Message… ……………………………………………………………………………
1. SMS… ………………………………………………………………………………
2. Receive SMS… ……………………………………………………………………
3. Delete … ……………………………………………………………………………
Connecting to the internet… ………………………………………………………
1. Connecting to the Internet…………………………………………………………
Setting… ………………………………………………………………………………
FAQ (Frequently asked Questions)… ……………………………………………
Technical Information… ……………………………………………………………
3
4
5
6
7
7
8
13
17
18
18
18
18
19
19
20
22
23
Caution for Safety
Z030
Z030
DO NOT disassemble or modify the Card
The risk of electric shock or fire may result. Do not use any
detergent or chemicals such as alcohol, benzene or sniffer to
clear your card.
It may cause the failure or equipment or the risk of explosion.
DO NOT use this equipment where the
place prohibited using your card such as in
hospital or in aircraft.
RF energy may effect on the medical devices or aircraft.
If you use any other personal medical device, maintain a
proper distance between your card and the device. Your card
may affect to the devices using all kinds of radio frequencies
(RF) energies.
DO NOT expose this equipment to rain or
spilled beverages.
Do not use this equipment in an extreme environment where
high temperature or high humidity exists. Do not use hair
dryer, heating, or microwave to dry the wetted PCMCIA Card.
It may cause the malformation of the PCMCIA Card or
explosion.
Z030
Z030
Package Includes
•W ireless Access Card
(model No.Z030)
•Installation CD
(Including Access Manager
software and complete
User Guide as PDF document)
Z030
Z030
Overview of the Wireless Access Card
External Antenna Connector
18Pin Connector
Internal Antenna
Ear-Microphone
Connector
LED Lamp
UIM Card Connector
(not available in Zapp network)
64Pin Connector
Z030
Z030
Introduction
Install the Z030 Manager Software and Z030 drivers before
using the PCMCIA card. Please do NOT insert the Z030
PCMCIA card into the laptop before following the installation
steps provided below, in this user guide.
Please check the contens of the purchased package.
IMPORTANT !
1.The Z030 Manager Software is available only in English
language.
2.The options of the Z030 Manager Software which are not
described in this user guide, are not available with the
Z030 in the Zapp network.
Installing and Configuring Wireless Access Card
Z030
Z030
1. Notebook PC System Requirements
The O/S (operating system) in PC should support
Windows 2000, XP
To install and run the Wireless Access Card and
accompanying Access Manager Software, you will
need these minimum system resources:
CPU: Pentium II (150MHz or higher)
Card slots: type II PC Card slot or Type II Compact Flash slot
Communication Ports: 1 port available
Disk Drive: CD-ROM
I/O Resource: 1 IRQ, 32 bytes I/O space
Memory: 64MB
Disk Space: 23MB
Z030
Z030
Installing and Configuring Wireless Access Card
2. Installing Z030 Manager onto Notebook PCs
(Windows 2000 and XP)
Insert the installation CD into your CD-ROM drive.
The installation Wizard will launch and guide you through
the installation process. Use the Next and Back buttons to
navigate through the wizard, noting the following:
In order to continue with the installation, you click Yes to
accept the terms of the License Agreement
Using the default setting for destination Folder and Program
Folder is recommended. If you need to install the software
to a different folder, click Browse, select the folder into
which you would like to install the program, and then click
next, to continue.
2-1. Install Access Manager
Insert the installation CD into your CD-ROM drive. The
Setup program should launch automatically.
If the system is ready, the <Z030 Manager setup> window
is displayed.
Note : Don’t insert PCMCIA Card in your notebook
Installing and Configuring Wireless Access Card
Z030
Z030
Press Next Button
Welcome to the Access Manager Setup program. This program will instal
Access Manager on your computer.
It strongly recommended that you exit all Windows programs before
running this Setup program.
Click Cancel to quit Setup and then close any programs you have running
Click Next to continue with the Setup program.
WARNING: This program is protected by copyright law and international
treaties.
Unauthorized reproduction or distribution of this program, or any portion of it,
May result in severe civil and criminal penalties, and will be prosecuted to
The maximum extent possible under law.
Press Next Button
Setup now has enough infomaion to start installing Access Manager.
Click Back to make any changes before contiuing. Click Cancel to exit
Setop.
Z030
Z030
Installing and Configuring Wireless Access Card
If Z030 Manager is completely installed, click Close.
(in case the specific window is displayed)
Setup is complete and Access Manager is now installed!
Click Close to end the Setup
D
uring the installation process, the following screen will
appear stating the Z030 driver is not Windows XP certified.
Click on Continue Anyway to continue with installation.
The software you are installing has not passed Windows Logo
Testing to verify it’s compatibility with WindowsXP. 〔Tell me why
This testing is important〕
Continuing your installation of this software may impair
Or destabilize the correct operation of your system
either immediately or in the future. Microsoft strongly
Recommends that you stop this installation now and
Contact the software vendor for software that has
Passed Windows Logo testing
10
10
Installing and Configuring Wireless Access Card
Z030
Z030
2-2 Install Microsoft Hotfixes
If the installation is ready, the <InstallShield Wizard> window
is displayed As below. and then click Next button
Welcome to the Installshield Wizard for
Microsoft Hotfixes
The InstallShled(R) Wizard will install Microsoft Hotfixes on
your computer. To continue, click Next.
WARNING: This program is protected by copyright law and
international treaties.
<Readme Information>Window is displayed, Click Next
HotfixInstaller detects the operating syscem and SP
Version and
appropriately installs the following Microsoft hotfixes
For PCMCIA cards:
Q318213
Q813820
Q813707
More information about these hotfixes can be found on
Microsoft’s web
Site...
http://support.microsoft.com/default.aspx?scid=kb;enus;328213
11
11
Z030
Z030
Installing and Configuring Wireless Access Card
Installation is pop up, and then press Install button
Ready to Install the program
The wizard is ready to begin installation.
If you want to review or change any of you installation settings, click Back. Click Cancel
to exit the wizard.
If Microsoft Hotfixes is completely installed, click Finish
InstallShield Wizard completed
The InstallShield Wizard has successfully installed Microsoft
Hotfixes, Click Finish to exit the wizard.
12
12
Installing and Configuring Wireless Access Card
Z030
Z030
A
fter completion of installation, a message box is displayed,
asking if you wish to reboot Windows.
Press Yes button if you wish to reboot Windows imediately.
You must restart your system for the configuration
Changes made to Microsoft Hotfixes to take effect.
Click Yes to restart now or No if you plan to restart
later.
3. Wireless Access Card Insertion and Device Initialization
1. After Access manager driver install, 5 Devices driver
automatically set up by “New Hardware Wizard” program in
window device manager when you insert Z030 Card in your
Notebook PC’s PCMCIA Card Slot.
1-1. Insert Z030 card
Insert Z030 into Notebook.
13
13
Z030
Z030
Installing and Configuring Wireless Access Card
1-2. Ubiquam UM-300 Multifunction Parent
W
indows 2000, XP: Check Install the software
automatically and press Next
Welcome to the Found New
Hardware Wizard
This wizard helps you install software for.
Ubiquam UM-300 Multifunction parent
If your hardware come with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically(Recommended)
Install from a list or specific location(Advanced)
Click Next to continue.
1-3. Ubiquam UM-300 serial drive (Function 1)
W
indows 2000, XP: Check Install the software
automatically and press Next
Welcome to the Found New
Hardware Wizard
This wizard helps you install software for.
Ubiquam UM-300 Function 1
If your hardware come with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically(Recommended)
Install from a list or specific location(Advanced)
Click Next to continue.
14
14
Installing and Configuring Wireless Access Card
Z030
Z030
1-4. Ubiquam UM-300 USB Interface (Function 0)
W
indows 2000, XP: Check Install the software
automatically and press Next
Welcome to the Found New
Hardware Wizard
This wizard helps you install software for.
Ubiquam UM-300 Function 0
If your hardware come with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically(Recommended)
Install from a list or specific location(Advanced)
Click Next to continue.
1-5. Ubiquam CDMA 2000 Composite Device
W
indows 2000, XP: Check Install the software
automatically and press Next
Welcome to the Found New
Hardware Wizard
This wizard helps you install software for.
Ubiquam CDMA2000 Composite Device.
If your hardware come with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically(Recommended)
Install from a list or specific location(Advanced)
Click Next to continue.
15
15
Z030
Z030
Installing and Configuring Wireless Access Card
1-6. Ubiquam CDMA 2000 Drive
W
indows 2000, XP: Check Install the software
automatically and press Next
Welcome to the Found New
Hardware Wizard
This wizard helps you install software for.
Ubiquam CDMA2000
If your hardware come with an installation CD
or floppy disk, insert it now.
What do you want the wizard to do?
Install the software automatically(Recommended)
Install from a list or specific location(Advanced)
Click Next to continue.
2. After Installed 5 devices, UM-300 is inserted correctly; the LED on the
module is blinking as Red to Green. Then the LED show the service
status (No service: Blinking as Red-Green-off-Red-Green, Service
connected : Blinking as Green-off-Green)
"NOTE: If Windows does not automatically detect the necessary
drivers, you can manually select them from the following location:
C:/Program Files/Zapp/Z030 Manager/Driver"
3. To make internet connection, User click
one-touch icon of internet connection on
the Access manager. Then connection
window is popped up, user click the setting
name in the window.
If the network setting has not been accomplished before, User should
set first the network setting in the connection window.
(Please refer “Setting” Chapter (12 page)
W
hen the internet connection has been succeeded, the Connect Icon is
16 changed into Disconnect Icon.
16
Z030
Z030
Using Z030 Manager
5
4
3
2
6
1
7
8
9
18
17
16
15
10
11
12 13 14
1. Connect/ Disconnect
2. Window Close
3. Window Minimize
4. Message Incoming
5. R
SSI(Receiving Signal Strength Indicator)
6. Date/Time
7. Status
8. Setting
9. Message
10. Call History
11. Volume Control
12. Send
13. Clear
14. End
15. Dial Pad
16. Phonebook
17. Speed Dial
18. Dial Pad On/Off
17
17
Z030
Z030
Message
1. SMS
You can view and organize short messages.
2. Receive SMS
Arrival of new SMS is displayed on indicator. To read SMS
Key click to pop up the message box. Double-click the
message you want to read from the message box to
open the mail.
3. Delete
1) After selecting messages from the message box, click
button to delete messages.
2) Or click “Delete” in the open message window to delete
messages.
"NOTE: SMS service can only be used when the Z030
PCMCIA card is set to either 1X or Hybrid (1X + EVDO)
connection modes"
18
18
Connecting to the Internet
Z030
Z030
1. Connecting to the Internet
Then press connect button, it will automatically connected
to the Internet.
If it is connected to the Internet, then
icon will appear.
When user is ready to disconnect from the Internet, press
button to end the connection.
19
19
Z030
Z030
Setting
Click “Setting” to open the setting window to set various items
for the dial pad.
1. Network
Input basic information for network.
For data mode, decide whether one of EV-DO and 1X, or
both of them is used.
E
V-DO + 1X- Hybrid mode. It will access EV-DO network first.
If it’s not possible, it will
access 1Xnetwork.
E
V-DO - Accessible only to EV-DO network.
1
X - Accessible only to 1X network.
D
ial-up Networking description
a. User Name: “Zapp” is preset (not required for authentification).
b. Password: “Zapp” is preset (not required for authentification).
c. Dial Number: #777 is preset.
S
oftware Version - You can check the software version of
Access Manager and Module.
20
20
Setting
Z030
Z030
2. Advanced
P
hone lock enable - You can select whether “Phone lock” is
used or not, and change “LockCode.”
21
21
Z030
Z030
FAQ (Frequently Asked Questions)
Below is a list of common error messages and possible
solutions
regard the use of your Wireless Access Card.
For amore detailed listing of errors and possible solutions,
please see the User’s Guide located on your installation CD.
Error
“Initialization
Fail“
“Out of
service area“
22
22
solution
If this message is displayed, please right
click the Z030 Manager icon on your
system tray and click “Exit”. Then remove
and reinsert the card and wait until your
computer “beeps” before clicking the Z030
Manager shortcut icon again
If this message is displayed, there is no
service available at this time. The network
may be Busy or undergoing maintenance.
Try Connecting to the network at a later
time, or Moving to another location if you
are outside The enhanced
“please insert
Card“
(After inserting
the card)
If this message is displayed after inserting
the Card, verify inserted in your computer
’s Type ll PC Card or Type ll Compact
Flash sot. If the message still exists,
please remove and reinsert the card.
“There was no
answer“
If this message appears, the network may
be Busy.
Try and connect again at a later time.
Technical information
Standard
Z030
Z030
Transmit(Tx)
CDMA 1X450MHz
453~457.5MHz
EV-DO
453~457.5MHz
Receive(Rx)
463~467.5MHz
463~467.5MHz
Maximum Data
Transmission
153.6kbps
2.4576Mbps
Simultaneously in forward and reverse links
Operating Voltage
3.3V
Note : TX,RX frequency band is basically I band.
Notice: This manual is written to help users. The
supplier can upgrade the software to improve the
performance without a notice. Please keep in mind
that displays can ­be changed by the upgrade of the
software.
23
23
DECLARATION OF CONFORMITY
We, SC TELEMOBIL SA, Romania, j. Ilfov, Bucharest Way no 2B bis,
registration number at the Registry of Commerce no: 1596697, assure,
guarantee and declare at ours own risk, in conformity with the 5 th article from the
Government Resolution nr 1022 / 2002 regarding the guidance of products and
services which could risk the life, health or the work and environment security that
the following product:
Z030 CDMA 450 SINGLE BAND PCMCIA MODEM CARD, UM 300
made in Korea by UBIQUAM CO., LTD, 272-3, Yatap3-dong, Bundang-gu,
Sungnam City, Kyuonggi do, at which this Declaration is regarding to, will not
put in danger the life, the health or the safety of the work, also will not have a
negative impact on the environment and it is in conformity with the following:
-
ETSI EN 301 908-1 - 2.2.1(2003-10)
ETSI EN 301 908-4 - 2.2.1(2003-10)
ETSI EN 301 489-01 - 1.5.1(2004.11)
ETSI EN 301 489-25 - 2.3.2(2004.07)
EN 60950-1:2001 (IEC 60950-1:2001(lst Edition))
Directives 99/5/EEC, 89/336/EEC, 73/23/EEC, (as in MET Laboratories
Report - 2006)
- Declaration Of Conformity of the producer
- The card is CE 0980 marked
This Declaration is written down in conformity with the express stipulations of SR
EN 45014-2000, HG 567/2002, HG1022/2002 and HG 1032/2001 and further
updates.
26.09.2006
Balotesti, Ilfov

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement