Samsung NP-N148P User guide

SAMSUNG NB28 Plus/N148 Plus/
N208 Plus/N218 Plus/
N143 Plus/N248 Plus
User Guide
Downloaded from LpManual.com Manuals
Downloaded from LpManual.com Manuals
Contents
Chapter 1. Getting Started
Cautions Regarding OS Support
6
Before You Start
7
Safety Precautions
9
Chapter 3. Settings and
Upgrade
24
Replacement Parts and Accessories
26
Regulatory Compliance Statements
28
WEEE SYMBOL INFORMATION
42
Basic Items
43
Overview
44
Front View
Status Indicators
Right View
Left View
Back View
Bottom View
Turn on the computer
Attaching the Battery
Connect the AC adapter
Turn on the computer
Using Sleep Mode
Chapter 2. Using the computer
57
58
Multi Card Slot (Optional)
60
Adjusting the Volume
62
Connecting the CD Drive
Inserting and Ejecting a CD
58
59
Downloaded from LpManual.com Manuals
68
Changing the Boot Priority
70
Upgrading Memory
71
Battery
73
Product Specifications
52
CD Drive (ODD, Optional)
Setting a Boot Password
65
66
73
74
75
75
77
Chapter 4. Appendix
50
50
51
Touchpad
65
Using the Security Lock Port
50
54
BIOS Setup
Installing/Removing the Battery
Charging the Battery
Measuring the Remaining
Battery Charge
Extending the Battery Usage Time
44
45
46
47
48
49
Keyboard
64
Entering the BIOS Setup
The BIOS Setup Screen
Proper Posture During Computer Use 21
Important Safety Information
LCD Brightness Control
3
80
Downloaded from LpManual.com Manuals
4
Chapter 1.
Getting Started
Contents
3
Cautions Regarding OS Support
6
Before You Start
7
Safety Precautions
9
Proper Posture During Computer Use
21
Important Safety Information
24
Replacement Parts and Accessories
26
Regulatory Compliance Statements
28
WEEE SYMBOL INFORMATION
42
Basic Items
43
Overview
44
Front View
44
Status Indicators
45
Right View
46
Left View
47
Back View
48
Bottom View
49
Turn on the computer
50
Attaching the Battery
50
Connect the AC adapter
50
Turn on the computer
51
Using Sleep Mode
Downloaded from LpManual.com Manuals
5
52
Cautions Regarding OS Support
z Windows is neither installed nor supplied with this computer.
x Therefore, customers should purchase a Windows XP or Windows 7/Vista software license
and install the software. Do not install an illegal copy or a copy that has already been
installed on another PC.
c For the installation procedures and any issues with the operating systems or applications
not supplied by Samsung Computer, contact the corresponding software company.
v The company will not provide a replacement or refund due to the reason x, c and if our
service engineer visits you due to this problem, a service charge will be applied.
Charge the battery fully when using the computer for the first time.
Downloaded from LpManual.com Manuals
6
Before You Start
Before reading the User Guide, first check the following information.
Safety Precaution Notations
Icon
Notation
Description
Warning
Failing to follow instructions marked with this symbol, may
cause personal injury and or fatality.
Caution
Failing to follow instructions marked with this symbol, may
cause slight injury to yourself or damage your property.
Text Notations
Icon
Notation
Description
Before You Start
Content included in this section includes information
required before using a function.
Caution
Content included in this section includes information
required about the function.
Note
Content included in this section includes helpful information
to use the function.
Copyright
© Samsung Electronics Co., Ltd. 2010
Samsung Electronics Co., Ltd. owns the copyright of this manual.
No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, without the consent of Samsung Electronics Co., Ltd.
The information in this document is subject to change without notice due to improving the
performance of the product.
Samsung Electronics shall not be liable for any data loss. Please take care to avoid losing any
important data and backup your data to prevent any such data loss.
Downloaded from LpManual.com Manuals
7
About the Product Capacity Representation Standard
About HDD Capacity Representation
The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that
1KB=1,000 Bytes.
However, the operating system (Windows) calculates the storage device capacity assuming
that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is
smaller than the actual capacity due to the difference in capacity calculation.
(E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB, 80x1,000x1,000x1,000
byte/(1,024x1,024x1,024)byte = 74.505GB)
In addition, the capacity representation in Windows may be even smaller because some
programs such as Recovery Solution may reside in a hidden area of the HDD.
About Memory Capacity Representation
The memory capacity reported in Windows is less than the actual capacity of memory.
This is because BIOS or a video adapter uses a portion of memory or claims it for further use.
(E.g. For 1GB(=1,024MB) memory installed, Windows may report the capacity as 1,022MB or
less)
Downloaded from LpManual.com Manuals
8
Safety Precautions
For your security and to prevent damage, please read the following safety instructions
carefully.
Since this is commonly applied to Samsung Computers, some pictures may differ from
actual product.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Installation Related
Do not install the product in
places exposed to humidity
such as a bathrooms.
There is a danger of
electric shock. Use the
product within the operating
conditions specified in the
Manufacturers User Guide.
Keep the plastic bags out of
the reach of children.
There is a danger of
suffocation.
Keep a distance of 15cm or
more between the computer
and the wall and do not
place any objects between
them.
Avoid exposing any part
of your body to the heat
from the computer vent or
AC adapter for a long time
when the computer is on.
This may increase the
internal temperature of the
computer and may cause an
injury.
Exposing a part of your body
close to the heat from the
vent or AC adapter for long
periods of time may cause
a burn.
Do not install the computer
on a slant or a place prone
to vibrations, or avoid
using the computer in that
location for a long time.
Avoid blocking the vent at
the bottom or side of the
computer when using it on
a bed or cushion.
This increases the risk that
a malfunction or damage to
the product will occur.
If the vent is blocked, there
is a danger of damaging the
computer or overheating the
inside of the computer.
NP Ver 2.3
Downloaded from LpManual.com Manuals
9
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Power Related
The power plug and wall outlet figures may differ depending on the country specifications
and the product model.
Do not touch the main plug
or power cord with wet
hands.
There is a danger of electric
shock.
Do not exceed the standard
capacity (voltage/current)
of a multiplug or power
outlet extension when
using it for the product.
There is a danger of electric
shock or fire hazard.
If the power cord or power
outlet makes a noise,
disconnect the power cord
from the wall outlet and
contact a service center.
There is a danger of electric
shock or fire hazard.
Do not use a damaged or
loose main plug or power
cord or power outlet.
There is a danger of electric
shock or fire hazard.
Downloaded from LpManual.com Manuals
10
Plug the power cord firmly
into the power outlet and
AC adapter.
Failing to do so may cause
fire hazard.
Do not unplug the power
cord out by pulling the
cable only.
If the cord is damaged, it
may cause electric shock.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Power Related
Do not bend the power cord
excessively or do not place
a heavy object over the
power cord. It is especially
important to keep the
power cord out of reach of
infants and pets.
If water or another
substance enters the
power input jack, AC
adapter or the computer,
disconnect the power cord
and contact the service
center.
If the cord is damaged, it
may cause electric shock
or fire.
Damage to the device within
the computer may cause
electric shock or fire hazard.
Connect the power cord to
an outlet or multiple power
plug (extended cable) with
a ground terminal.
Keep the power cord or
outlet clean so that they are
not covered with dust.
Failing to do so may result
in electric shock.
Failing to do so may result
in fire.
Downloaded from LpManual.com Manuals
11
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
AC Adapter Usage Precautions
Connect the power cord to
the AC adapter firmly.
Otherwise, there is a
danger of fire due to an
incomplete contact.
Use only the AC adapter
supplied with the product.
Do not place heavy objects
or step onto the power
cord or AC adapter to avoid
damaging the power cord
or AC adapter.
If the cord is damaged,
there is a danger of electric
shock or fire.
Using another adapter may
cause the screen to flicker.
Downloaded from LpManual.com Manuals
12
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Battery Usage Related
Keep the battery out of
the reach of infants and
pets, as they could put the
battery into their mouths.
There is a danger of electric
shock or choking.
Authorized
Parts
Use an authorized battery
and AC adapter only.
Please use an authorized
battery and adapter
approved by Samsung
Electronics.
Do not use the computer in
a badly ventilated location
such as on bedding, on a
pillow or cushion, etc, and
do not use it in a location
such as room with floor
heating as it may cause the
computer to overheat.
Take care that the computer
vents (on the side or the
bottom) are not blocked
especially in these
environments. If the vents
are blocked, the computer
may overheat and it may
cause a computer problem,
or even explosion.
Please use the computer
within the recommended
temperature and humidity
range (10~32ºC, 20~80%
RH).
Power Off
Do not close the LCD panel
and put the computer into
your bag to move it when it
is still turned on.
Unauthorized batteries and
adapters may not meet the
proper safety requirements
and may cause problems or
malfunctions and result in an
explosion or fire.
Downloaded from LpManual.com Manuals
Do not use the computer in
a humid location such as a
bathroom or sauna.
If you put the computer into
your bag without turning
it off, the computer may
overheat and there is a
danger of fire. Shut the
computer down properly
before moving it.
13
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Usage Related
Never heat the battery
or put the battery into a
fire. Do not put or use the
battery in a hot location
such as a sauna, inside
a vehicle exposed to the
heat, and so on.
There is a danger of an
explosion or fire.
Take care not to allow
metal objects such as a key
or clip to touch the battery
terminal (metal parts).
If a metal object touches
the battery terminals, it may
cause excessive current
flow and it may damage the
battery, or result in a fire.
If liquid leaks out of the
battery or there is a funny
smell coming from the
battery, remove the battery
from the computer and
contact a service center.
Disconnect all cables
connected to the
computer before cleaning
it. If you are cleaning
a notebook computer,
remove the battery.
There is a danger of an
explosion or fire.
There is a danger of
electric shock or damage to
the product.
To use the computer safely,
replace a dead battery with
a new, authorized battery.
Do not connect a phone
line connected to a digital
phone to the modem.
Please charge the
battery fully before
using the computer
for the first time.
Downloaded from LpManual.com Manuals
14
There is a danger of a
electric shock, fire or
damage to the product.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Upgrade Related
Do not place any container
filled with water or
chemicals over or near the
computer.
Avoid direct sunlight when
the computer is in an
air-tight location such as
inside a vehicle.
If water or chemicals enter
the computer, this may
cause fire or electric shock.
There is a danger of a fire
hazard. The computer may
overheat and also present
opportunity to thieves.
If the computer is broken
or dropped, disconnect the
power cord and contact a
service center for a safety
check.
Using a broken computer
may cause electric shock or
fire hazard.
Do not use your notebook
PC for long periods of time
while a part of your body
is making direct contact
with it. The temperature of
the product may increase
during normal operation.
This may result in harming
or burning your skin.
Downloaded from LpManual.com Manuals
15
Never disassemble the
power supply or AC
adapter.
There is a danger of
electric shock.
When removing the RTC
(Real Time Clock) battery,
keep it out of the reach
of children as they could
touch and/or swallow it.
There is a danger of
choking. If a child has
swallowed it, contact a
doctor immediately.
Warning
Failing to follow instructions marked with this symbol may cause personal injury and even fatality.
Security and Movement Related
Use only authorized
parts (multiplug, battery
and memory) and never
disassemble parts.
There is a danger of
damaging the product,
electric shock or fire
hazard.
Shut down the computer
and disconnect all cables
before disassembling
the computer. If there is
a modem, disconnect
the phone line. If you are
disassembling a notebook
computer, make sure to
remove the battery.
Failing to do so, may cause
electric shock.
Follow the instructions
for the relevant location
(e.g. airplane, hospital,
etc.) when using a wireless
communication device
(wireless LAN, Bluetooth,
etc.).
When carrying the
notebook computer with
other items, such as the
adapter, mouse, books
etc, take care not to press
anything against the
notebook computer.
If a heavy object is pressed
against the notebook
computer, a white spot or
stain may appear on the
LCD. Therefore, take care
not to apply any pressure to
the notebook.
Avoid exposing a drive to
magnetic fields. Security
devices with magnetic
fields include airport
walk-through devices and
security wands.
The airport security
devices that check carryon luggage, such as
conveyor belts, use x-rays
instead of magnetism and
will not damage a drive.
Downloaded from LpManual.com Manuals
16
In this case, place the
notebook computer in a
separate compartment away
from the other objects.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.
Installation Related
Battery Usage Related
Do not block the ports
(holes), vents, etc. of the
product and do not insert
objects.
Dispose of worn-out
batteries properly.
Damage to a component
within the computer may
cause electric shock or fire.
 The battery disposal
method may differ
depending on your
country and region.
Dispose of the used
battery in an appropriate
way.
When using the computer
with it lying on its side,
place it so that the vents
face upwards.
 There is a danger of fire
or explosion.
Failing to do so, may cause
the internal temperature of
the computer to rise and
the computer to malfunction
or halt.
Do not throw or
disassemble the battery
and do not put it into water.
Do not place a heavy
object over the product.
Use only a battery
authorized by Samsung
Electronics.
This may cause a problem
with the computer. In
addition, the object may
fall and cause injury, or
damage the computer.
This may cause an injury,
fire or explosion.
Failing to do so may cause
an explosion.
Downloaded from LpManual.com Manuals
17
Avoid contact with metal
objects such as car keys
or clips when keeping or
carrying a battery.
Contact with a metal may
cause excessive current
and a high temperature and
may damage the battery or
cause a fire.
Charge the battery
according to the
instructions in the manual.
Failing to do so, may cause
an explosion or fire from
damage to the product.
Do not heat the battery
or expose it to heat (e.g.
inside a vehicle during the
summer).
There is a danger of
explosion or fire.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.
Usage Related
Do not place a candle, light
cigar, etc. over or on the
product.
Do not use your computer
and AC Adapter on your lap
or soft surfaces.
Do not touch the antenna
with electricity facility such
as the power outlet.
There is a danger of fire.
If the computer temperature
increases, there is a danger
of burning yourself.
There is a danger of electric
shock.
Use a wall outlet or multiplug with a grounding part.
Failing to do so may cause
electric shock hazard.
Make sure to have the
product tested by a safety
service engineer after
repairing the product.
Authorized Samsung Repair
Centers will carry out safety
checks after a repair. Using
a repaired product without
testing it for safety may
cause an electric shock or
fire.
In case of lightning,
immediately turn the
system off, disconnect
the power cord from the
wall outlet and phone line
from modem. Do not use a
modem or phone.
There is a danger of electric
shock or fire.
Connect only permitted
devices to the connectors
or ports of the computer.
When handling computer
parts, follow the
instructions on the manual
supplied with the parts.
Failing to do so, may cause
electric shock and fire.
Failing to do so, may cause
damage to the product.
Close the LCD panel
only after checking if the
notebook computer is
turned off.
If the computer emits
smoke, or there is a burning
smell, disconnect the
power plug from the wall
outlet and contact a service
center. If your computer is
a notebook computer, make
sure to remove the battery.
The temperature may
rise and it may cause
overheating and deformation
of the product.
Do not press the Eject
Button while the Floppy
Disk/CD-ROM drive is in
operation.
You might lose data and
the disk might be suddenly
ejected and could cause an
injury.
Take care not to drop the
product while using it.
This may cause personal
injury or loss of data.
Downloaded from LpManual.com Manuals
18
There is a danger of fire.
Do not use a damaged or
modified CD/Floppy Disk.
There is a danger of
damaging the product or
personal injury.
Do not insert your fingers
into the PC Card Slot.
There is a danger of injury or
electric shock.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.
Upgrade Related
Use recommended
computer cleansing
solution when cleaning
the product and only use
the computer when it is
completely dried.
Take care when touching
the product or parts.
Failing to do so may cause
electric shock or fire.
Take care not to throw or
drop a computer part or
device.
Emergency disk eject
method using paperclip
should not be used while
the disk is in motion. Make
sure to use the emergency
disk eject method only
when the Optical Disk
Drive is stopped.
There is a danger of injury.
Do not place your face
close to the Optical Disk
Drive tray when it is
operating.
The device may be
damaged or you may be
injured.
This may cause injury or
damage to the product.
Make sure to close the
computer cover before
connecting the power after
a reassembly.
There is a danger of electric
shock if your body touches
an internal part.
Use parts authorized by
Samsung Electronics only.
There is a danger of injury
due to an abrupt ejection.
Failing to do so, may cause
fire or damage the product.
Check CDs for cracks and
damage prior to use.
Never disassemble or
repair the product by
yourself.
It may damage the disc and
cause disorder of device
and injury of user.
There is a danger of electric
shock or fire.
Downloaded from LpManual.com Manuals
19
To connect a device that
is not manufactured or
authorized by Samsung
Electronics, enquire at
your service center before
connecting the device.
There is a danger of
damaging the product.
Caution
Failing to follow instructions marked with this symbol may cause slight injury or damage to the product.
Security and
Movement Related
Cautions on Preventing Data Loss
(Hard Disk Management)
When moving the product,
turn the power off and
separate all connected
cables first.
Take care not to damage the data on a hard disk drive.
The product might be
damaged or users may trip
over the cables.
For long periods of not
using the notebook
computer, discharge the
battery and preserve as it
is detached.
The battery will be
preserved at its best
condition.
Do not operate or watch
the computer while driving
a vehicle.
There is a danger of a
traffic accident. Please
concentrate on driving.
 A hard disk drive is so sensitive to external impact
that an external impact may cause loss of data on the
surface of the disk.
 Take extra care, because moving the computer or
an impact on the computer when it is turned on may
damage the data of the hard disk drive.
 The company is not liable for any loss of any data
caused by a customer’s careless usage or bad
environmental conditions.
Causes that may damage the data of a hard disk drive and
the hard disk drive itself.
 The data may be lost when an external impact is applied
to the disk while disassembling or assembling the
computer.
 The data may be lost when the computer is turned off
or reset by a power failure while the hard disk drive is
operating.
 The data may be lost and irrecoverable due to a
computer virus infection.
 The data may be lost if the power is turned off while
running a program.
 Moving or causing an impact to the computer while
the hard disk drive is operating, may cause files to be
corrupted or bad sectors on the hard disk.
To prevent data loss due to damage to the hard disk drive,
please backup your data frequently.
Downloaded from LpManual.com Manuals
20
Proper Posture During Computer Use
Maintaining a proper posture during computer use is very important to prevent physical
harm.
The following instructions are about maintaining a proper posture during computer use
developed through human engineering. Please read and follow them carefully when using
the computer.
Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may
increase and serious physical harm may be caused.
The instructions in this manual have been prepared so that they can be applied
within the coverage of general users. If the user is not included in the coverage, the
recommendation is to be applied according to the user’s needs.
Proper Posture
 To use the computer while talking over
the telephone, use a headset. Using
the computer with the phone on your
shoulder is bad for posture.
Adjust the heights of desks and chairs
appropriate to your height.
 Keep frequently used items within a
comfortable work range (where you can
reach them with your hands).
The heights are to be adjusted so that your
arm forms a right angle when you place your
hand over the keyboard while sitting down on
a chair.
Adjust the height of chair so that your heel is
comfortably placed on the floor.
 Do not use the computer while you are
lying down, but only while you are sitting
down..
 Do not use the computer on your lap.
If the computer temperature increases,
there is a danger of burning yourself.
 Work while keeping your wrist straight.
 Use a chair with a comfortable back.
 Keep the center of your leg weight not on
the chair but on your feet when you are
sitting on a chair.
Downloaded from LpManual.com Manuals
21
Eye Position
Hand Position
Keep the monitor or LCD away from your
eyes by at least 50cm.
Keep your arm at a right angle as shown by
the figure.
m
50c
 Keep the line from your elbow to your
hand straight.
 Adjust the height of the monitor and the
LCD screen so that its top height is equal
to or lower than your eyes.
 Do not place your palm over the keyboard
while typing.
 Avoid setting the monitor and LCD
excessively bright.
 Keep the monitor and LCD screen clean.
 Do not hold the mouse with excessive
force
 If you wear glasses, clean them before
using the computer.
 Do not press the keyboard, touchpad or
mouse with excessive force.
 When entering contents printed on a
paper into the computer, use a static
paper holder so that the height of the
paper is almost equal to that of the
monitor.
 It is recommended connecting an
external keyboard and mouse when using
the computer for long periods of time.
Downloaded from LpManual.com Manuals
22
Volume Control (Headphones and
Speakers)
Use Time (Break Time)
 Take a break for 10 minutes or more after
a 50-minute period when working for
more than one hour.
Check your volume first to listen to music.
Illumination
 Do not use the computer in dark
locations. The illumination level for
computer use must be as bright so for
reading a book.
Check your
volume!!
 Indirect illumination is recommended.
Use a curtain to prevent reflection on the
LCD screen.
 Check if the volume is too loud before
using headphones.
 It is not recommended using headphones
for long periods of time.
Operation Condition
 Any deviation from the equalizer default
setting could cause hearing impairment.
 Do not use the computer in hot and
humid locations.
 The default setting can be changed
through software and driver updates
without your intervention. Please check
the equalizer default setting before first
usage.
 Use the computer within the allowed
temperature and humidity range specified
in the User Guide.
Downloaded from LpManual.com Manuals
23
Important Safety Information
Safety Instructions
 Openings in the computer case are
provided for ventilation. Do not block
or cover these openings. Make sure
you provide adequate space, at least 6
inches (15 cm), around the system for
ventilation when you set up your work
area. Never insert objects of any kind into
the computer ventilation openings.
Your system is designed and tested to meet
the latest standards for safety of information
technology equipment. However, to ensure
safe use of this product, it is important that
the safety instructions marked on the product
and in the documentation are followed.
 Ensure that the fan vents on the bottom
of the casing are clear at all times. Do
not place the computer on a soft surface,
doing so will block the bottom vents.
Always follow these instructions to
help guard against personal injury
and damage to your system.
 If you use an extension cord with this
system, make sure that the total power
rating on the products plugged into the
extension cord does not exceed the
extension cord power rating.
Setting Up your System
 Read and follow all instructions marked
on the product and in the documentation
before you operate your system. Retain
all safety and operating instructions for
future use.
 For Notebooks with glossy display bezels
the user should consider the placement
of the Notebook as the bezel may cause
disturbing reflections from surrounding
light and bright surfaces.
 Do not use this product near water or a
heat source such as a radiator.
 Set up the system on a stable work
surface.
 The product should be operated only with
the type of power source indicated on the
rating label.
 Ensure that the electrical outlet you are
using to power your equipment is easily
accessible in case of fire or short circuit.
 If your computer has a voltage selector
switch, make sure that the switch is in the
proper position for your area.
Downloaded from LpManual.com Manuals
24
Care During Use
The Instruction On Safety Operation
of NotePC
 Do not walk on the power cord or allow
anything to rest on it.
z When installing and operating devices
 Do not spill anything on the system. The
best way to avoid spills is to not eat or
drink near your system.
please refer to safety requirements in the
user guide.
x Devices can be used only with the
 Some products have a replaceable
CMOS battery on the system board.
There is a danger of explosion if the
CMOS battery is replaced incorrectly.
Replace the battery with the same or
equivalent type recommended by the
manufacturer.
Dispose of batteries according to the
manufacturers instructions. If the CMOS
battery requires replacement insure that
a qualified technician performs the task.
equipment specified in the technical
specifications of the devices.
c If any smell of burning or smoke from the
computer the unit should be switched off
and battery removed. The unit should be
checked by a qualified technician before
reuse.
v Service and repair of devices should be
carried out by authorized service centers.
b Do not allow your portable computer to
 When the computer is turned off, a small
amount of electrical current still flows
through the computer.
To avoid electrical shock, always unplug
all power cables, remove the battery
and modem cables from the wall outlets
before cleaning the system.
operate with the base resting directly
on exposed skin for extended periods
of time. The surface temperature of the
base will rise during normal operation
(particularly when AC Power is present).
Allowing sustained contact with exposed
skin can cause discomfort or eventually
a burn.
 Unplug the system from the wall outlet
and refer servicing to qualified personnel
if:
– The power cord or plug is damaged.
– Liquid has been spilled into the system.
– The system does not operate properly
when the operating instructions are
followed.
– The system was dropped or the casing
is damaged.
– The system performance changes.
Downloaded from LpManual.com Manuals
25
Replacement Parts and Accessories
Use only replacement parts and accessories recommended by manufacturer.
To reduce the risk of fire, use only No. 26 AWG or larger telecommunications line cord.
Do not use this product in areas classified as hazardous. Such areas include patient
care areas of medical and dental facilities, oxygen rich environments, or industrial
areas.
Laser Safety
Battery Disposal
All systems equipped with CD or DVD drives
comply with the appropriate safety standards,
including IEC 60825-1. The laser devices in
these components are classified as “Class
1 Laser Products” under a US Department
of Health and Human Services (DHHS)
Radiation Performance Standard. Should
the unit ever need servicing, contact an
authorized service location.
Do not put rechargeable batteries
or products powered by nonremovable rechargeable batteries
in the garbage.
Contact the Samsung Helpline for information
on how to dispose of batteries that you
cannot use or recharge any longer.
Follow all local regulations when disposing of
old batteries.
 Laser Safety Note:
THERE IS A RISK OF
EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE
INSTRUCTIONS.
Use of controls or adjustments
or performance of procedures
other than those specified
in this manual may result in
hazardous radiation exposure.
To prevent exposure to laser
beams, do not try to open the
enclosure of a CD or DVD drive.
 Class 1M laser radiation when
operating part is open.
Do not view directly with optical
instruments.
 Class 3B invisible laser
radiation when open.
Downloaded from LpManual.com Manuals
26
Avoid exposure to the beam.
Connect and Disconnect
the AC adapter
Power Cord Requirements
The power cord set (wall plug, cable and
AC adapter plug) you received with your
computer meets the requirements for use
in the country where you purchased your
equipment.
The socket-outlet shall be installed near the
equipment and shall be easily accessible.
Do not unplug the power cord out by pulling
the cable only.
Power cord sets for use in other countries
must meet the requirements of the country
where you use the computer. For more
information on power cord set requirements,
contact your authorized dealer, reseller, or
service provider.
General Requirements
The requirements listed below are
applicable to all countries:
 All power cord sets must be approved
by an acceptable accredited agency
responsible for evaluation in the country
where the power cord set will be used.
 The power cord set must have a minimum
current capacity of 7 A and a nominal
voltage rating of 125 or 250 volts AC, as
required by each country’s power system.
(USA ONLY)
 The appliance coupler must meet the
mechanical configuration of an EN 60
320/IEC 320 Standard Sheet C7(or C5)
connector, for mating with appliance inlet
on the computer.
Downloaded from LpManual.com Manuals
27
Regulatory Compliance Statements
Wireless Guidance
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices),
operating in the 2.4GHz/ 5GHz Band, may be present (embedded) in your notebook system.
The following section is a general overview of considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific
country sections (or country group sections). The wireless devices in your system are only
qualified for use in the countries identified by the Radio Approval Marks on the system rating
label. If the country you will be using the wireless device in, is not listed, please contact your
local Radio Approval agency for requirements. Wireless devices are closely regulated and use
may not be allowed.
The RF field strength of the wireless device or devices that may be embedded in your notebook
are well below all international RF exposure limits as known at this time. Because the wireless
devices (which may be embedded into your notebook) emit less energy than is allowed in radio
frequency safety standards and recommendations, manufacturer believes these devices are
safe for use. Regardless of the power levels, care should be taken to minimize human contact
during normal operation.
Some circumstances require restrictions on wireless devices. Examples of common
restrictions are listed on the next page:
Downloaded from LpManual.com Manuals
28
 Radio frequency wireless communication can interfere with equipment on commercial
aircraft. Current aviation regulations require wireless devices to be turned off while
traveling in an airplane.
802.11ABGN (also known as wireless Ethernet or Wi-Fi) and Bluetooth communication
devices are examples of devices that provide wireless communication.
 In environments where the risk of interference to other devices or services is harmful
or perceived as harmful, the option to use a wireless device may be restricted or
eliminated. Airports, Hospitals, and Oxygen or flammable gas laden atmospheres are
limited examples where use of wireless devices may be restricted or eliminated. When
in environments where you are uncertain of the sanction to use wireless devices, ask
the applicable authority for authorization prior to use or turning on the wireless device.
 Every country has different restrictions on the use of wireless devices. Since your
system is equipped with a wireless device, when traveling between countries with your
system, check with the local Radio Approval authorities prior to any move or trip for
any restrictions on the use of a wireless device in the destination country.
 If your system came equipped with an internal embedded wireless device, do not
operate the wireless device unless all covers and shields are in place and the system
is fully assembled.
 Wireless devices are not user serviceable. Do not modify them in any way. Modification
to a wireless device will void the authorization to use it. Please contact manufacturer
for service.
 Only use drivers approved for the country in which the device will be used. See the
manufacturer System Restoration Kit, or contact manufacturer Technical Support for
additional information.
Downloaded from LpManual.com Manuals
29
United States of America
USA and Canada Safety
Requirements and Notices
Use On Aircraft Caution
Regulations of the FCC and FAA
prohibit airborne operation of
radio-frequency wireless devices
because their signals could
interfere with critical aircraft
instruments.
Do not touch or move antenna while the unit
is transmitting or receiving.
Do not hold any component containing
the radio such that the antenna is very
close or touching any exposed parts of the
body, especially the face or eyes, while
transmitting.
Other Wireless Devices
Do not operate the radio or attempt
to transmit data unless the antenna is
connected; if not, the radio may be damaged.
Safety Notices for Other Devices in
the Wireless Network: Refer to the
documentation supplied with wireless
Ethernet adapters or other devices in the
wireless network.
Use in specific environments:
The use of wireless devices in hazardous
locations is limited by the constraints posed
by the safety directors of such environments.
The Part 15 radio device operates
on a non-interference basis
with other devices operating at
this frequency. Any changes or
modification to said product not
expressly approved by Intel could
void the user’s authority to operate
this device.
The use of wireless devices on airplanes
is governed by the Federal Aviation
Administration (FAA).
The use of wireless devices in hospitals
is restricted to the limits set forth by each
hospital.
Explosive Device Proximity
Warning
Do not operate a portable
transmitter (such as a wireless
network device) near unshielded
blasting caps or in an explosive
environment unless the device has
been modified to be qualified for
such use.
Downloaded from LpManual.com Manuals
30
Unintentional Emitter per FCC Part 15
If necessary, the user should consult the
dealer or an experienced radio/television
technician for additional suggestions. The
user may find the following booklet helpful: “
Something About Interference.”
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:(1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
This is available at FCC local regional
offices. Our company is not responsible
for any radio or television interference
caused by unauthorized modifications of this
equipment or the substitution or attachment
of connecting cables and equipment other
than those specified by our company. The
correction will be the responsibility of the
user. Use only shielded data cables with this
system.
This equipment has been tested
and found to comply with the
limits for a Class B digital device
pursuant to Part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in
a residential installation. This
equipment generate uses and can
radiate radio frequency energy
and if not installed and used in
accordance with the instructions
may cause harmful interference
will not occur in a particular
installation. If this equipment does
cause harmful interference to
radio or television reception, which
can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
 Reorient or relocate the
receiving antenna.
 Increase the separation between
the equipment and receiver.
 Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
 Consult the dealer or an
experienced radio/TV technician
for help.
Downloaded from LpManual.com Manuals
31
Intentional emitter per FCC Part 15
Wireless devices are not user
serviceable. Do not modify them in
any way.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio
frequency (RF) wireless communication
devices), operating in the 2.4GHz/5GHz
Band, may be present (embedded) in your
notebook system. This section is only
applicable if these devices are present. Refer
to the system label to verify the presence of
wireless devices.
Modification to a wireless device
will void the authorization to use it.
Contact manufacturer for service.
Wireless devices that may be in your system
are only qualified for use in the United States
of America if an FCC ID number is on the
system label.
This device is restricted to indoor use due
to its operation in the 5.15 to 5.25 GHz
frequency range. FCC requires this product
to be used indoors for the frequency range
5.15 to 5.25 GHz to reduce the potential for
harmful interference to co-channel Mobile
Satellite systems. High power radars are
allocated as primary users of the 5.25 to 5.35
GHz and 5.65 to 5.85 GHz bands. These
radar stations can cause interference with
and /or damage this device.
Operation of this device is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Downloaded from LpManual.com Manuals
32
FCC Part 68
(If fitted with a modem device.)
The telephone company may make changes
in its facilities, equipment, operations, or
procedures that could affect the operation
of the equipment. If this happens, the
telephone company will provide advanced
notice in order for you to make necessary
modifications to maintain uninterrupted
service.
This equipment compiles with part of the
FCC rules. On the back of this equipment
is a label that contains, among other
information, the FCC registration number
and ringer equivalence number (REN) for
this equipment. If requested, this information
must be provided to the telephone company.
If trouble is experienced with this equipment
(Modem) for repair or warranty information,
please contact your local distributor. If the
equipment is causing harm to the telephone
network, the telephone company may request
that you disconnect the equipment until the
problem is resolved.
This equipment uses the following USOC
jacks : RJ11C
An FCC compliant telephone cord and
modular plug is provided with this equipment.
This equipment is designed to be connected
to the telephone network or promises wiring
using a compatible modular jack which is Part
68 compliant. See Installation Instructions for
details.
The user must use the accessories and
cables supplied by the manufacturer to get
optimum performance from the product.
No repairs may be done by the customer.
This equipment cannot be used on public
coin phone service provided by the telephone
company. Connection to party line service is
subject to state tariffs.
The REN is used to determine the quantity
of devices which may be connected to
telephone line. Excessive RENs on the
telephone line may result in the devices not
ringing in response to an incoming call. In
most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of
the number of devices that may be connected
to a line, as determined by total RENs,
contact the local telephone company to
determine the maximum REN for the calling
area.
The Telephone Consumer Protection Act
of 1991 makes it unlawful for any person
to use a computer or other electronic
device, including fax machines, to send
any message unless such message clearly
contains in a margin at the top or bottom of
each transmitted page or on the first page
of the transmission, the date and time it is
sent and an identification of the business
or other entity, or other individual sending
the message and the telephone number
of the sending machine or such business,
other entity, or individual. (The telephone
number provided may not be any number for
which charges exceed local or long-distance
transmission charges.)
If the terminal equipment causes harm to the
telephone network, the Telephone Company
will notify you in advance that temporary
discontinuance of service may be required.
But if advance notice is not practical, the
telephone company will notify the customer
as soon as possible. Also, you will be advised
of your right to file a complaint with the FCC if
you believe it is necessary.
Downloaded from LpManual.com Manuals
In order to program this information into your
fax machine, refer to your communications
software user manual.
33
Canada
Unintentional Emitter per ICES-003
The maximum allowed antenna gain for use
with this device is 6dBi in order to comply
with the E.I.R.P limit for the 5.25- to 5.35 and
5.725 to 5.85 GHz frequency range in pointto-point operation.
This digital apparatus does not exceed the
Class B limits for radio noise emissions
from digital apparatus as set out in the radio
interference regulations of Industry Canada.
The power output of the wireless device (or
devices), which may be embedded in your
notebook, is well below the RF exposure
limits as set by Industry Canada.
Le présent appareil numérique n’émet pas
de bruits radioélectriques dépassant les
limitesapplicables aux appareils numériques
de Classe B prescrites dans le règlement
sur le brouillage radioélectrique édicté par
Industrie Canada.
Operation of this device is subject to the
following two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Intentional Emitter per RSS 210
To prevent radio interference to
licensed service, this device is
intended to be operated indoors
and away from windows to provide
maximum shielding. Equipment (or
its transmit antenna) that is installed
outdoors is subject to licensing.
(If fitted with 2.4G band or 5G band)
Low power, Radio LAN type devices (radio
frequency (RF) wireless communication
devices), operating in the 2.4GHz/5GHz
Band, may be present (embedded) in your
notebook system. This section is only
applicable if these devices are present. Refer
to the system label to verify the presence of
wireless devices.
Wireless devices are not user
serviceable. Do not modify them in
any way. Modification to a wireless
device will void the authorization
to use it. Contact manufacturer for
service.
Wireless devices that may be in your system
are only qualified for use in Canada if an
Industry Canada ID number is on the system
label.
When using IEEE 802.11a wireless LAN, this
product is restricted to indoor use due to its
operation in the 5.15- to 5.25-GHz frequency
range. Industry Canada requires this product
to be used indoors for the frequency range of
5.15 GHz to 5.25 GHz to reduce the potential
for harmful interference to co-channel
mobile satellite systems. High power radar
is allocated as the primary user of the 5.25to 5.35-GHz and 5.65 to 5.85-GHz bands.
These radar stations can cause interference
with and/or damage to this device.
Downloaded from LpManual.com Manuals
34
Telecommunications per DOC notice
(for products fitted with an ICcompliant modem)
To avoid electrical shock or
equipment malfunction do not
attempt to make electrical ground
connections by yourself. Contact
the appropriate inspection authority
or an electrician, as appropriate.
The Industry Canada label identifies certified
equipment. This certification means that the
equipment meets certain telecommunications
network protective, operation, and safety
requirements. The Department does not
guarantee the equipment will operate to the
users’ satisfaction.
The Ringer Equivalence Number (REN)
assigned to each terminal device provides
an indication of the maximum number of
terminals allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination of
devices subject only to the requirement that
the sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.
Before installing this equipment, users
should make sure that it is permissible
to be connected to the facilities of the
local telecommunications company. The
equipment must also be installed using
an acceptable method of connection. In
some cases, the inside wiring associated
with a single-line individual service may be
extended by means of a certified connector
assembly. The customer should be aware
that compliance with the above conditions
may not prevent degradation of service in
some situations.
Brazil
Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção
contra interferência prejudicial, mesmo
de estações do mesmo tipo, e não pode
causar interferência a sistemas operando em
caráter primário.
Repairs to certified equipment should
be made by an authorized Canadian
maintenance facility designated by
the supplier. Any repairs or alterations
made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the equipment.
Users should make sure, for their own
protection, that the electrical ground
connections of the power utility, telephone
lines, and internal metallic water pipe system,
if present, are connected together. This
precaution may be particularly important in
rural areas.
Downloaded from LpManual.com Manuals
35
European Union
European Union CE Marking and
Compliance Notices
European Directives
This Information Technology Equipment has
been tested and found to comply with the
following European directives:
Products intended for sale within the
European Union are marked with the
Conformité Européene (CE) Marking, which
indicates compliance with the applicable
Directives and European standards and
amendments identified below. This equipment
also carries the Class 2 identifier.
 EMC Directive 2004/108/EC
 Low Voltage Directive 2006/95/EC
 R&TTE Directive 1999/5/EC
The following information is only applicable
to systems labeled with the CE mark
.
Manufacturer Information
Samsung Electronics Co., Ltd.
416, Maetan-3Dong, Yeongtong-Gu, SuwonCity, Gyeonggi-Do, 443-742, Korea
Samsung Electronics Suzhou Computer CO.,
LTD
No. 198, Fangzhou Road, Suzhou Industrial
Park, Jiangsu Province, 215021, China
Tel:+86-512-6253-8988
For the web or the phone number of
Samsung Service Centre, see the Warranty
or contact the retailer where you purchased
your product.
Downloaded from LpManual.com Manuals
36
European Radio Approval
Information (for products fitted with
EU-approved radio devices)
This Product is a Notebook computer;
low power, Radio LAN type devices (radio
frequency (RF) wireless communication
devices), operating in the 2.4GHz/5GHz
band, may be present (embedded) in your
notebook system which is intended for home
or office use. This section is only applicable
if these devices are present. Refer to the
system label to verify the presence of
wireless devices.
Wireless devices that may be in your system
are only qualified for use in the European
Union or associated areas if a CE mark
with a Notified Body Registration Number
and the Alert Symbol is on the system label.
The power output of the wireless device
or devices that may be embedded in you
notebook is well below the RF exposure limits
as set by the European Commission through
the R&TTE directive.
The low band 5.15 - 5.35 GHz is for indoor
use only.
See 802.11b and 802.11g
restrictions for specific countries or
regions within countries under the
heading “European Economic Area
Restrictions” below.
Downloaded from LpManual.com Manuals
37
EU R&TTE Compliance Statements
Česky
[Czech]
Samsung tímto prohlašuje, že tento Notebook PC je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Dansk
[Danish]
Undertegnede Samsung erklærer herved, at følgende udstyr Notebook PC
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/
EF.
Deutsch
[German]
Hiermit erklärt Samsung, dass sich das Gerät Notebook PC in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti
[Estonian]
Käesolevaga kinnitab Samsung seadme Notebook PC vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele
asjakohastele sätetele.
English
Hereby, Samsung, declares that this Notebook PC is in compliance with
the essential requirements and other relevant provisions of Directive
1999/5/EC.
Español
[Spanish]
Por medio de la presente Samsung declara que el Notebook PC cumple
con los requisitos esenciales y cualesquiera otras disposiciones aplicables
o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Samsung ΔΗΛΩΝΕΙ ΟΤΙ Notebook PC
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente Samsung déclare que l’appareil Notebook PC est
conforme aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Italiano
[Italian]
Con la presente Samsung dichiara che questo Notebook PC è conforme
ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Latviski
[Latvian]
Ar šo Samsung deklarē, ka Notebook PC atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo Samsung deklaruoja, kad šis Notebook PC atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart Samsung dat het toestel Notebook PC in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Downloaded from LpManual.com Manuals
38
Malti
[Maltese]
Hawnhekk, Samsung, jiddikjara li dan Notebook PC jikkonforma malħtiāijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fidDirrettiva 1999/5/EC.
Magyar
[Hungarian]
Alulírott, Samsung nyilatkozom, hogy a Notebook PC megfelel a
vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
Polski
[Polish]
Niniejszym Samsung oświadcza, Ŝe Notebook PC jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português
[Portuguese]
Samsung declara que este Notebook PC está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
Samsung izjavlja, da je ta Notebook PC v skladu z bistvenimi zahtevami in
ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak]
Samsung týmto vyhlasuje, že Notebook PC spĺňa základné požiadavky a
všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi
[Finnish]
Samsung vakuuttaa täten että Notebook PC tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
Svenska
[Swedish]
Härmed intygar Samsung att denna Notebook PC står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser som
framgår av direktiv 1999/5/EG.
Íslenska
[Icelandic]
Hér með lýsir Samsung yfir því að Notebook PC er í samræmi við
grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC.
Norsk
[Norwegian]
Samsung erklærer herved at utstyret Notebook PC er i samsvar med de
grunnleggende krav og øvrige relevante krav i direktiv 1999/5/EF.
Türkiye
[Türkçe]
Bu belge ile, Samsung bu Notebook PC’nin 1999/5/EC Yönetmeliğinin
temel gerekliliklerine ve ilgili hükümlerine uygun olduğunu beyan eder.
To view the EU Declaration of Conformity for this product (in English only), go to: http://www.
samsung.com/uk/support/download/supportDownMain.do then search the model number of
the product.
If the Declaration of Conformity for the model you are interested in is not available on our website, please contact your distributor.
Downloaded from LpManual.com Manuals
39
European Economic Area
Restrictions
General
European standards dictate maximum
radiated transmit power of 100 mW effective
isotropic radiated power (EIRP) and the
frequency range 2400 – 2483.5 MHz.
The low band 5.15 - 5.35 GHz is for indoor
use only.
Local Restriction of 802.11b/802.11g Radio
Usage
[Note to integrator: The following statements
on local restrictions must be published in all
end-user documentation provided with the
system or product incorporating the wireless
product.]
Belgium
The product may be used outdoors, but for
outdoor transmissions over a distance of
300m or more, a license from the BIPT is
required.
Due to the fact that the frequencies
used by 802.11b/802.11g wireless
LAN devices may not yet be
harmonized in all countries,
802.11b/802.11g products are
designed for use only in specific
countries or regions, and are not
allowed to be operated in countries
or regions other than those of
designated use.
This restriction should be indicated in the
manual as follows:
Dans le cas d’une utilisation privée, à l’
extérieur d’un bâtiment, au-dessus d’un
espace public, aucun enregistrement n’
est nécessaire pour une distance de moins
de 300m. Pour une distance supérieure à
300m un enregistrement auprès de l’IBPT
est requise. Pour une utilisation publique à l’
extérieur de bâtiments, une licence de l’IBPT
est requise. Pour les enregistrements et
licences, veuillez contacter l’IBPT.
As a user of these products, you
are responsible for ensuring that
the products are used only in the
countries or regions for which they
were intended and for verifying
that they are configured with the
correct selection of frequency and
channel for the country or region of
use. Any deviation from permissible
settings and restrictions in the
country or region of use could be an
infringement of local law and may
be punished as such.
France
For Metropolitan departments:
2.400 - 2.4835 GHz for indoor use.
2.400 - 2.454 GHz (channels 1 to 7) for
outdoor use.
For Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte:
2.400 - 2.4835 GHz for indoor and outdoor
use.
The European variant is intended for use
throughout the European Economic Area.
However, authorization for use is further
restricted in particular countries or regions
within countries, as follows:
For Reunion, Guyane:
2.400 - 2.4835 GHz for indoor use.
2.420 - 2.4835 GHz for outdoor use (channels
5 to 13)
The low band 5.15 - 5.35 GHz is for indoor
use only.
Downloaded from LpManual.com Manuals
40
European Telecommunication
Information (for products fitted with
EU-approved modems)
This equipment has been approved to Council
Decision 98/482/EEC - “CTR 21” for PanEuropean single terminal connection to the
Public Switched Telephone Network (PSTN).
Marking by the symbol
indicates
compliance of this equipment to the Radio
and Telecom Terminal Equipment Directive
1999/5/EC. Such marking is indicative
that this equipment meets or exceeds the
following technical standards:
However, due to differences between the
individual PSTNs provided in different
countries, the approval does not, of itself, give
an unconditional assurance of successful
operation on every PSTN termination point.
In the event of problems, you should contact
manufacturer Technical Support.
CTR 21 - Attachment requirements for
pan-European approval for connection to
the analogue Public Switched Telephone
Networks (PSTNs) of TE (excluding TE
supporting voice telephony services) in
which network addressing, if provided, is by
means of Dual Tone Multi-Frequency (DTMF)
signaling.
Although this equipment can use
either loop disconnect (pulse) or
DTMF (tone) signaling, only the
performance of the DTMF signaling
is subject to regulatory requirements
for correct operation.
It is therefore strongly
recommended that the equipment
is set to use DTMF signaling
for access to public or private
emergency services. DTMF
signaling also provides faster call
setup.
Downloaded from LpManual.com Manuals
41
WEEE SYMBOL INFORMATION
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems.)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other
household waste at the end of their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate these items from other
types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take these items for
environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with other
commercial wastes for disposal.
Correct disposal of batteries in this product
Pb
(Applicable in the European Union and other European countries with separate
battery return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this product
should not be disposed of with other household waste at the end of their working life. Where
marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not
properly disposed of, these substances can cause harm to human health or the environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
USA ONLY
This Perchlorate warning applies only to primary CR (Maganese Dioxide) Lithium coin cells in
the product sold or distributed ONLY in California USA.
“Perchlorate Material- special handling may apply, See www.dtsc.ca.gov/hazardouswaste/
perchlorate.”
Downloaded from LpManual.com Manuals
42
Basic Items
The items included in the package may vary depending on your selection of the optional
items. Some items may be replaced with similar products and the color of some items
may differ from that in this document.
Computer
Standard Battery
Power Cable
Charge the battery fully when using the computer for the first time.
Downloaded from LpManual.com Manuals
43
AC Adapter
Overview
Before You Start!
 Optional items may be changed or may not be provided depending on the computer
model.
 The actual color and appearance of the computer may differ from the pictures used
in this guide.
Front View
1
8
2
7
3
6
5
4
1
Camera Lens (Optional)
Using this lens, you can take still pictures and record video.
2
Keyboard
A device to enter data by pressing the keys.
3
Touchpad/Touchpad Buttons
The touchpad and touchpad buttons provide functions similar
to the mouse ball and buttons.
4
Power Switch
Turns the computer on or off.
5
Multi Card Slot
6
Status Indicators
7
Microphone
8
LCD
(Optional)
A card slot that supports SD Card, SDHC, MMC and SDXC.
Shows the operating status of the computer.
The corresponding operating LED is lit when the
corresponding function operates.
(Optional)
You can use the built-in microphone.
The screen images are displayed here.
Downloaded from LpManual.com Manuals
44
Status Indicators
1
2
4
3
5
1
Caps Lock
This turns on when the Caps Lock key is pressed allowing capital letters to
be typed without holding the Shift button down.
2
Hard Disk Drive
Indicates that the hard disk drive is running.
3
Wireless LAN
This turns on when the wireless LAN is operating.
4
Charge Status
This shows the power source and the battery charge status.
Green: When the battery is fully charged or the battery is not installed.
Amber: When the battery is being charged.
Off:
5
Power
hen the computer is running on battery power without being
W
connected to AC adapter.
This shows the computer operating status.
On:
W
hen the computer is operating.
Blinks: When the computer is in Sleep mode.
Downloaded from LpManual.com Manuals
45
Right View
1
1
2
3
4
Wireless LAN Switch
(Optional)
In models with a wireless LAN function, first make sure that the
wireless LAN function is turned off.
2
USB Port
You can connect USB devices to the USB port such as a keyboard/
mouse, digital camera, etc.
3
Monitor Port
A port used to connect a monitor, TV or projector supporting a
15pin D-SUB interface.
4
Security Lock Port
You can connect a Kensington lock to the Security Lock Port to
prevent the computer from being stolen.
Downloaded from LpManual.com Manuals
46
Left View
1
2
3
4
5 6
1
DC Jack
A jack to connect the AC adapter that supplies power to the
computer.
2
Wired LAN Port
Connect the Ethernet cable to this port.
3
Fan Vents
The internal heat of the computer is emitted through these holes.
If the vents are blocked the computer may overheat.
Avoid blocking the vents as this may be dangerous.
4
USB Port
/
Chargeable USB Port
(Optional)
USB Port
You can connect USB devices to the USB port such as a keyboard/
mouse, digital camera, etc.
Chargeable USB Port
You can charge USB devices through the USB port even when the
computer is turned off.
 Charging a device through a Chargeable USB takes
longer than using a regular charger.
 Press the F2 key when the Samsung logo appears
in the booting sequence to enter the BIOS Setup,
select Advanced > USB Charge In Sleep Mode, and
set it to Enable. Then you can use the Chargeable
USB Port feature even in sleep mode.
5
Microphone Jack
A jack used to connect the microphone.
6
Headphone Jack
A jack used to connect the headphones.
Downloaded from LpManual.com Manuals
47
Back View
1
1
Battery
This is a Lithium-Ion rechargeable battery that supplies power to the computer.
Downloaded from LpManual.com Manuals
48
Bottom View
1
2
3
4
1
Battery Latches
The latch used to remove or install the battery.
2
Memory Compartment
Cover
The main memory is installed inside the cover.
3
Fan Vents
The internal heat of the computer is emitted through these holes.
If the vents are blocked the computer may overheat.
Avoid blocking the vents as this may be dangerous.
4
Speaker
A device used to generate sound.
Downloaded from LpManual.com Manuals
49
Turn on the computer
Attaching the Battery
1
Battery preparation.
2
Attaching the Battery.
Connect the AC adapter
1
Connect the AC adapter.
2
Connect the power cable.
z
x
Power
Cable
DC-in Jack
AC Adapter
 Charge the battery fully when using the computer for the first time.
 When using the power cable, insert the power cable completely into the AC adapter.
 Some items may be replaced with similar products and the color of some items may
differ from that in this document.
 The images used for the illustration are of a representative model, therefore the
images may differ from the the actual product.
Downloaded from LpManual.com Manuals
50
Turn on the computer
Charge the battery fully when using the computer for the first time.
1
Lift up the LCD panel.
2
Slide the Power Switch to turn the computer on.
x
z
Press the Fn+
key to increase the LCD brightness.
You can only use this function after installing Windows XP or Windows 7/Vista and
installing the Easy Display Manager program with the system software media disk.
Downloaded from LpManual.com Manuals
51
Using Sleep Mode
Windows XP, Windows Vista or Windows 7.
Sleep mode enables switching the computer to Standby mode in order to minimize power
consumption and enables users to use the computer instantly by pressing any key on the
mouse or keyboard.
Using Sleep Mode in Windows 7/Vista
Click Start >
> Sleep.
Using Stand by Mode in Windows XP
Click Start > Turn Off Computer > Stand By.
Downloaded from LpManual.com Manuals
52
Chapter 2.
Using the
computer
Keyboard
54
Touchpad
57
CD Drive (ODD, Optional)
58
Connecting the CD Drive
58
Inserting and Ejecting a CD
59
Multi Card Slot (Optional)
60
Adjusting the Volume
62
Downloaded from LpManual.com Manuals
53
Keyboard
Shortcut key functions and procedures are discussed in the following sections.
 The keyboard is supplied according to the corresponding country.
 The keyboard image may differ from the actual keyboard.
 You can only use the hot keys and the pre-determined shortcut keys (Windows key,
application key, volume key, etc.) after installing Windows XP or Windows 7/Vista.
 Some model is not supplied System Software Media depending on your computer
model.
Shortcut Keys
You can use the following functions by pressing the keys below with the Fn key.
Fn+
Name
REST
(Sleep Mode)
Function
Pressing the key switches the computer to power-saving (Standby)
mode. To use the computer in this state, press the Power button.
You can use this button after installing Windows XP or Windows
7/Vista.
Shows the remaining battery charge.
Gauge
Euro
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
Enters the Euro monetary unit symbol.
Switches the screen output to the LCD or external monitor when an
external monitor (or TV) is connected to the computer.
CRT/LCD
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
Turns the LCD backlight on or off.
Backlit
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
Downloaded from LpManual.com Manuals
54
Fn+
Name
Function
Mutes or cancels mute.
Mute
Samsung
Support
Center
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
System diagnosis, recovery and Internet consultation program,
Samsung Support Center, will be launched. (Optional)
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Samsung Support Center program with the
system software media disk. (Optional)
You can select operation mode when you need maximum system
performance or low-noise/low power consumption with one-click.
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy SpeedUp Manager program with the
system software media disk.
 Silent: Low-noise and low power consumption mode
 Normal: Normal Mode
Easy
SpeedUp
Manager
S
peed: Maximum performance mode. The system operates in its
maximum performance, and system resources are allocated to the
currently active program with priority for maximum performance.
S
peed Boot: Quick booting mode. This mode enables quick booting
when the booting process has slowed down because multiple
programs have been installed. You can boot up the computer more
quickly by setting the time to execute the S/W in the Advanced
menu.
If you don’t want fan noise turning ON and OFF in the Silent
mode, select the Advanced menu > Fan Silent Mode > Low
in the BIOS Setup. The fan keeps turning ON and works in
Low noise mode.
Wireless
network
Turns on or off wireless network device in a model equipped with
wireless network device.
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program and the
wireless LAN driver with the system software media disk.
Turns the Touchpad function on or off.
Touchpad
When using an external mouse only, you can turn the Touchpad off.
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
Downloaded from LpManual.com Manuals
55
Fn+
Name
Function
Turns the numeric keyboard on or off.
Num Lock
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
If you turn the Scroll Lock on, you can scroll the screen up or down
without changing the cursor location in some applications.
Scroll Lock
You can only use this function after installing Windows XP or Windows
7/Vista and installing the Easy Display Manager program with the
system software media disk.
Screen Brightness Control
To adjust the LCD brightness press the Fn +
combination.
key combination or the Fn +
key
The changed screen brightness is displayed at the center of the screen for a moment.
You can use the screen brightness control keys after installing Windows and Easy
Display Manager.
Volume Control
To control the volume, press the Fn +
key combination or the Fn +
You can mute the sound or cancel the mute function by clicking the Fn +
combination.
key combination.
key
You can use the volume and numeric keys after installing Windows XP or Windows
7/Vista.
Numeric Key
The numbers are printed in blue on the numeric keys.
If Num Lock is turned on by pressing the Fn +
keys to enter digits.
key combination, you can use the numeric
You can only use the numeric keys after installing Windows XP or Windows 7/Vista.
Downloaded from LpManual.com Manuals
56
Touchpad
The touchpad provides the same function as a mouse and the left and right buttons of the
touchpad plays the role of the left and right buttons of a mouse.
Before You Start!
 Use the Touchpad with your fingers. Using a sharp object may damage the
Touchpad.
 If you touch the Touchpad or press the Touchpad buttons while booting up, the
Windows boot time may be extended.
Scroll Area
Touchpad
Plays the role of the mouse
wheel. You can scroll up
and down using the Scroll
Area.
Use to move the cursor.
Touchpad Right Button
Touchpad Left Button
Plays the role of the right
mouse button.
You can select or run a
program using this button.
Downloaded from LpManual.com Manuals
57
CD Drive (ODD, Optional)
An optical disk drive is optional and may differ depending on your computer model. For
detailed specifications, refer to the catalogue.
 Do not insert a cracked or scratched CD.
Otherwise, the CD may break and damage the optical disk drive when the CD rotates
at a high speed.
 When you clean a CD or DVD title, wipe with a soft cloth from inside to outside.
 Do not eject a CD when the CD operating LED is on.
 The images used for the illustration are of a representative model, therefore the
images may differ from the the actual product.
 Using a CD that is not in the shape of a circle is not recommended.
Connecting the CD Drive
Connect the CD drive to the USB port.
USB port
Downloaded from LpManual.com Manuals
58
Inserting and Ejecting a CD
1
Press the Eject button of the CD drive.
Status Indicator
Emergency Hole
Eject Button
2
When the CD tray opens, insert a CD or DVD and push the tray in until it clicks.
3
Push the CD tray inward until it clicks.
The CD drive status indicator is turned on.
 A CD drive’s reading and writing speed may differ depending on the condition and
type of the media.
 To eject a CD when the CD drive does not work or the computer is off, place the end
of a paper clip (
) into the Emergency Hole until the CD tray is ejected.
Downloaded from LpManual.com Manuals
59
Multi Card Slot (Optional)
Using the multi card slot, you can read and write data to a SDHC, MMC, SDXC and SD
card.
You can use a card as a removable disk and conveniently exchange data with digital
devices such as a digital camera, digital camcorder, MP3, etc.
You can only use it after installing Windows XP or Windows 7/Vista.
Before You Start!
 You have to additionally purchase a multi card with the necessary capacity
depending on your requirements.
 You can use a multi card just like any data storage device. A copyright protection
function is not supported.
 Since you can lose a card when moving the computer, keep the card separately.
 Before using the slot, remove the dummy card from the slot.
(Only models supplied with a dummy card).
 Supported Cards : SD Card, SDHC card, MMC card, SDXC card
 The images used for the illustration are of a representative model, therefore the
images may differ from the the actual product.
To Insert and Use a Memory Card
Insert a card into the slot according to the directions printed on the slot.
Example) SD Card
Downloaded from LpManual.com Manuals
60
To format a memory card
Using a Mini SD and RS-MMC
Since the above cards are too
small, you cannot insert the cards
into the slot directly.
When using a memory card for the first time,
you must format the card before using it.
Insert the card into the dedicated
adapter (available from most
electronic retailers) and then insert
the adapter into the multi card slot.
Formatting a card deletes all data
saved on the card. If the card
includes data, backup the data
before formatting it.
However, depending on the
adapter’s body material, some RSMMC cards may not be recognized
properly. Samsung recommends
checking the card is recognized
correctly prior to purchasing.
1
Click Start > My computer.
2
Right-click over a card drive with the
touchpad and select Format.
3
Click Start to the formatting.
To remove a memory card
Take hold of the end of the card and remove
the card.
 To use a card to exchange data
with a digital device such as a
digital camera, formatting the
data using the digital device is
recommended.
 When you try to use a card,
which is formatted in the
computer, in another digital
device, you may have to format
the card again in the device.
 You cannot format, write or
delete data from a SD, or SDHC
card with a write protection tab
when it is in the Lock position.
 Inserting and removing a
memory card repeatedly may
damage the memory card.
Downloaded from LpManual.com Manuals
61
Adjusting the Volume
You can adjust the volume using the keyboard and the volume control program.
Adjusting the Volume using the
Keyboard
Press the Fn +
Adjusting the Volume using the
Volume Adjustment Program
key combination or Fn +
You can only use it after installing
Windows XP or Windows 7/Vista.
key combination to adjust the volume.
The following are the procedures
to control the volume in Windows
7/Vista. For the Windows XP
procedures, refer to the following
as the procedures are similar.
key combination to turn
Press the Fn +
the volume on or off.
You can only use it after installing
Windows XP or Windows 7/Vista.
Click the Volume icon
on the taskbar and
slide the volume control bar to adjust the
volume.
Mute
Alternatively, right-click over the Volume icon
and select Open Volume Mixer to adjust
the volume.
Downloaded from LpManual.com Manuals
62
Chapter 3.
Settings and
Upgrade
LCD Brightness Control
64
BIOS Setup
65
Entering the BIOS Setup
65
The BIOS Setup Screen
66
Setting a Boot Password
68
Changing the Boot Priority
70
Upgrading Memory
71
Battery
73
Installing/Removing the Battery
73
Charging the Battery
74
Measuring the Remaining Battery Charge75
Extending the Battery Usage Time
Using the Security Lock Port
Downloaded from LpManual.com Manuals
75
77
LCD Brightness Control
You can adjust the LCD brightness in 8 levels.
Before You Start!
The LCD brightness is the brightest (Level 8) when the computer is running on AC
power, and it becomes dimmer when running on battery power.
Controlling the Brightness Using the Keyboard
You can use the screen brightness control keys after installing Windows and Easy Display
Manager.
Adjust the LCD brightness by pressing the Fn +
key or the Fn +
key.
The LCD brightness can change up to 8 levels and the brightness increases by 1 level when
pressing the Fn +
key once.
 Maintaining the changed LCD brightness even after turning the computer on again
To maintain the LCD brightness set by using the brightness control keys or through
the Power Options, follow the procedures below.
1. Turn the computer on and press the F2 key when the SAMSUNG logo appears on
the screen to enter the BIOS Setup.
2. S
elect the Boot menu and set the Brightness Mode Control item to User Control.
3. Press the F10 key to save the settings and exit Setup.
 LCD bad pixels principle of laptop computer
Samsung observes the specifications regarding strict quality and reliability of LCD
But in spite of that, it is inevitable that there might be a small number of bad pixels. A
large number of bad pixels can cause problems in appearance, but a small number
of pixels doesn't affect the computer performance.
Therefore Samsung observes and manages the following dot principles:
- Bright dot : 2 or less
- Black dot : 4 or less
- Combination of Bright and Dark : 4 or less
Instructions for Cleaning the LCD
Clean the LCD panel with a soft cloth lightly moistened with computer cleansing
detergent moving in one direction.
Cleaning the LCD panel with excessive force can damage the LCD.
Downloaded from LpManual.com Manuals
64
BIOS Setup
The BIOS Setup enables you to configure your computer hardware according to your
needs.
Before You Start!
 Use the BIOS setup to define a boot password, change the booting priority, or add a
new device.
Since incorrect settings may cause your system to malfunction or crash, take care
when configuring the BIOS.
 The functions of the BIOS setup are subject to change for product function
enhancement purposes.
The BIOS Setup menus and items may differ depending on your computer model.
Entering the BIOS Setup
1
Turn the computer on.
2
When the booting screen (SAMSUNG logo) appears, press the F2 key to enter the BIOS
Setup.
Press the F12 key while the booting screen(SAMSUNG logo) appears, the system will
try to boot from the network.
3
After a moment, the BIOS setup screen appears.
The items in the BIOS setup may differ depending on the product.
Downloaded from LpManual.com Manuals
65
The BIOS Setup Screen
The functions of the BIOS setup are subject to change for product function
enhancement purposes.
XXXXXXXX
Setup Menu
System Time
System Date
[10:21:53]
[07/30/200X]
SATA Port 1
XXXXXXXX
CPU Vendor
CPU Type
CPU Speed
XXXXXXXX
X.XX GHz
Total Memory
XXX MB
BIOS Version
MICOM Version
XXXXXXXX
XXXXXXXX
Help
Help for the selected item
appears automatically.
Setup Items
Setup Menu
Main/
Sysinfo
Advanced
Security
Description
Used to change the basic system and environment settings.
Used to configure advanced functions on your computer for devices and chipsets.
Used to configure security functions, including passwords.
Boot
Used to set the boot priority and other boot options.
Exit
Used to exit the Setup either saving the changes or not.
Downloaded from LpManual.com Manuals
66
System Setup Keys
In the Setup, you have to use the keyboard.
F1
Press to view the Setup Help.
Up & Down Keys
Press to move up and down.
F5/F6
F9
ESC
Left & Right Keys
Enter
F10
Press to change the item value.
Press to load the default Setup settings.
Press to return to a higher level menu or to move to the
Exit menu.
Press to move to another menu.
Press to select an item or to enter a sub menu.
Press to save the changes and exit Setup.
The keyboard image may differ from the actual keyboard.
Downloaded from LpManual.com Manuals
67
Setting a Boot Password
When setting a password, you have to enter a password to use the computer or enter the
BIOS Setup.
By configuring a password, you can restrict system access to authorized users only and
protect data and files saved on the computer.
Before You Start!
 Do not lose or forget your password.
 If you have forgotten your password, contact a Samsung service center. In this case,
a service fee will be charged.
Setting a Supervisor Password
3
Enter a password, press <Enter>, reenter the password for confirmation,
and press <Enter> again. The
password can be up to 8 alphanumeric
characters. Special characters are not
allowed.
4
When a message confirming the
password configuration appears in the
[Setup Notice] window, press <Enter>.
The supervisor password has been set.
The supervisor password is required to
turn the computer on or to enter the
BIOS Setup.
A Supervisor Password is required to turn
the computer on or to start the System
Setup.
When setting a Supervisor Password, users
other than a supervisor cannot use the
computer.
1
Select the Security menu in the BIOS
Setup.
2
In the Set Supervisor Password item,
press <Enter>.
XXXXXXXX
Setting a User Password
Users can start the system with a user
password, but cannot enter the System
Setup. By doing this, you can prevent other
users from entering Setup.
Downloaded from LpManual.com Manuals
68
Before configuring a user password, a
supervisor password must have been
configured. Deactivating the supervisor
password also deactivates the user
password.
Changing the hard disk drive
password
For security purposes, you can
only change a hard disk drive
password after restarting the
computer by pressing the computer
Power button.
In the Set User Password item, press
<Enter> and complete the procedures from
Step 3 of Setting a Supervisor Password.
If you cannot change the hard
disk drive password or the HDD
Password Frozen message
appears when entering the BIOS
Setup and then selecting Security
> HDD Password, press the Power
button to turn the computer on
again.
Setting Up a Boot Password
To setup a boot password, the administrator
password (Set Supervisor Password) should
be set in advance.
Set the Password on boot item to Enabled.
Once a boot password is set, you have to
enter a password to boot up the computer.
Deactivating the Password
Setting up a Hard Disk Drive
Password (Optional)
1
Press <Enter> on the password to be
deactivated. For example, to deactivate
a supervisor password in the Set
Supervisor Password item, press
<Enter>.
2
In the Enter Current Password item,
enter the currently configured password
and press <Enter>.
3
Leave the Enter New Password item
field empty, and press <Enter>.
4
Leave the Confirm New Password field
empty, and press <Enter>.
5
In the [Setup Notice] window, press
<Enter>.
The password is deactivated.
A supervisor password must be set using the
Set Supervisor Password menu.
If you set a password for a hard disk drive, it
cannot be accessed from another computer.
Press Enter in the Set HDD Password item
and define a password as described in Step
3 of the Setting up the Supervisor Password.
The hard disk drive password
setting function is not provided for
some models.
Downloaded from LpManual.com Manuals
69
Changing the Boot Priority
This computer is configured to boot from an external-type ODD first.
This chapter describes how to change the boot priority so that the computer boots from
the hard disk drive first.
1
Select the Boot menu in the BIOS
Setup.
2
XXXXXXXX
Press <Enter>
on the Boot Device
Priority item.
3
Press the down key (↓) to move to the
IDE HDD item and press the F6 key to
move the item to the top.
Boot Device Priority
[Boot priority order]
1. USB CD
: N/A
2. IDE HDD : XXXXXXXX
3. PCI BEV
: N/A
4. USB FDD : N/A
5. USB KEY : N/A
6. USB HDD : XXXXXXXX
7.
8.
[Excluded from boot order]
- USB ZIP
: N/A
- USB LS120 : N/A
- PCI SCSI
: N/A
- Other USB : N/A
- PCI
: N/A
4
Downloaded from LpManual.com Manuals
70
Press the F10 key to save the settings
and exit Setup. The highest boot
priority device is now set to the Hard
Drive.
Upgrading Memory
A memory is installed in the memory slot at the bottom of this computer. The procedures
to replace the memory are described below.
Before You Start!
 Replace new memory only after shutting the computer down completely. Do not
replace memory when the computer is in Sleep mode.
 Disconnect main power plug and remove the battery before continuing.
 Only use the same type of memory as specified in the Product Specification.
 The memory compartment cover may differ from the figure below.
 You must use only memory modules
with the specifications (DDR2 or
DDR3) printed on the memory slot that
appears when you open the memory
compartment cover at the bottom.
e.g) in the case of using DDR2
2
Replacing the Memory
1
Remove the memory module out at an
angle of 30 degrees.
Remove the screw on the memory
compartment cover at the bottom of
the computer using a screw driver.
Fixing Screw
Downloaded from LpManual.com Manuals
Pull the memory module latches
outward. The memory module will pop
up.
71
3
Insert a new memory module into
the memory slot at an angle of
approximately 30 degrees aligning it to
the angle of the memory slot.
4
Push the memory module down so that
it is completely fixed. If the memory
does not fit easily, push the memory
module down while pulling the memory
module latches outward.
5
Close the memory compartment cover
and fasten the screw.
Memory Slot
Downloaded from LpManual.com Manuals
72
Battery
Please refer to the following instructions when running the computer on battery power
without connecting the AC power.
A Lithium-Ion smart battery is supplied with this computer.
Before You Start!
Carefully read and follow the precautions printed on the battery before using the battery.
Precautions
 Use only chargers specified in the User Manual.
 Never heat the battery pack, put it near or in a fire or use at a temperature higher
than 60°C, as this may cause fire.
 Never cause a short circuit between the battery pack terminals or disassemble the
battery pack.
 Carefully read and follow the precautions printed on the battery and the safety
instructions in the User Manual before using the battery.
 Please refer to the system operation environment of this manual and operate and
store the battery at room temperature.
Installing/Removing the Battery
1
Shutdown the system, close the LCD
panel and place the computer upside
down on a flat surface.
2
Pull the two battery latches outwards
, then remove the battery.
Downloaded from LpManual.com Manuals
z
73
x
z
Charging the Battery
3
1
To install the battery again, slide the
battery into the system.
The battery latches move inwards and
fix the battery automatically.
Attach the battery and connect the
AC adapter to the DC-in jack of the
computer.
The battery will then start charging.
Check if the battery latch has been
moved inwards.
2
Downloaded from LpManual.com Manuals
74
When charging is complete, the Charge
LED turns green.
Status
Charge LED
Charging
Amber
Charging complete
Green
AC adapter not
connected
Off
Battery Usage Time Information
Measuring the Remaining
Battery Charge
A battery is an expendable supply, so when
using it over a long time, the capacity/battery
life is shortened. If the battery life is reduced
to under half of its initial time, we recommend
purchasing a new battery.
You can view the battery charge status by
completing the following procedures.
When not using the battery for a long time,
store the battery after charging it to 30-40%
of its capacity. This extends the battery life
time.
To use the shortcut key to view
You can only use this function after installing
Windows XP or Windows 7/Vista and
installing the Easy Display Manager program
with the system software media disk. (Only
for Widows 7/Vista)
Press the Fn +
Extending the Battery Usage
Time
keys on the keyboard.
The remaining battery charge (%) will
displayed for a moment.
Decreasing the LCD Brightness
Battery Warning
Press the Fn +
keys on the keyboard to
decrease the LCD brightness to extend the
battery usage time.
If the battery residual amount is
3~5%, the computer automatically
shuts down after saving the data.
The battery residual amount may
vary depending on the computer
model.
Downloaded from LpManual.com Manuals
You can only use this function after
installing Windows XP or Windows
7/Vista and installing the Easy
Display Manager program with the
system software media disk.(Only
for Widows 7/Vista
75
Using the Battery Calibration
Function
3
Move to the Boot > Smart Battery
Calibration item using the direction
XXXXXXXX
keys and press <Enter>.
4
Highlight Yes in the Battery Calibration
Confirmation window and press
<Enter>.
When charging/discharging the battery
repeatedly for a short time only, the battery
usage time may be reduced by the difference
between the actual battery charge and the
remaining charge display.
In this case, the actual battery charge and
the remaining charge display will be the
same by discharging the battery completely
using the Battery Calibration function, and
then recharging it again.
1
2
Disconnect the AC power adapter after
turning off the computer.
Restart your computer and press the
F2 button when the Samsung logo
appears, to start the BIOS Setup.
The Battery Calibration function is
activated and the battery is forcefully
discharged. To stop the operation, press
the <Esc> button.
This operation requires 3~5 hours
depending on the battery capacity and
the remaining battery charge.
Downloaded from LpManual.com Manuals
76
Using the Security Lock Port
You can connect a Kensington lock to the Security Lock port to prevent your computer
from being stolen when you have to use the computer in a public place.
To use this feature, you have to purchase the Kensington lock additionally.
To use the Kensington lock, refer to the product manual.
Tie the Kensington lock cable to a fixed object and install the other end of the cable to the
Security Lock port.
Downloaded from LpManual.com Manuals
77
Downloaded from LpManual.com Manuals
78
Chapter 4.
Appendix
Product Specifications
Downloaded from LpManual.com Manuals
80
Product Specifications
The system specifications may differ depending on the derived models.
For detailed system specifications, refer to the product catalogue.
NP-NB28 Plus/N148 Plus/N208 Plus/N218 Plus/N143 Plus/N248 Plus
CPU
Intel ATOM™ Processor
Main Memory (Optional)
Memory type: DDR2 SODIMM
DDR3 SODIMM
Main Chipset
Intel NM10 Express
Hard Disk Drive (Optional)
9.5mmH SATA HDD
Graphics
Intel GMA 3150 (Internal)
Operating Environment
Temperature : -5~40°C for storage, 10~32°C when operating
Humidity : 5~90% for storage, 20~80% when operating
Operating Voltage
100 - 240VAC
Frequency
50/60Hz
Output Power (Optional)
40W
Output Voltage (Optional)
19VDC 2.1A(40W)
 Optional components may not be provided or different components may be provided
depending on the computer model.
 The system specifications are subject to change without notice.
Downloaded from LpManual.com Manuals
80
Registered Trademarks
Samsung is a registered trademark of Samsung Co., Ltd.
Intel, ATOM/Pentium/Celeron are registered trademarks of the Intel Corporation.
Microsoft, MS-DOS, and Windows are registered trademarks of the Microsoft Corporation.
All other product or company names mentioned herein are registered trademarks of their
respective companies.
ENERGY STAR® Partner
s an ENERGY STAR® Partner, SAMSUNG has determined that this product
A
meets the ENERGY STAR® guidelines for energy efficiency.
Downloaded from LpManual.com Manuals
81
Downloaded from LpManual.com Manuals
82
Downloaded from LpManual.com Manuals
Downloaded from LpManual.com Manuals