Philips 19HFL3340D/10 Specifications

Philips Hospitality LCD TV: Pro+ range
EN 19HFL3340D/10
Please ask your local sales support for additional information on correct installation/ positioning
of the TV in the room and complementary accessories.
DFU-AUG2008
PB1 PHILIPS
Table of contents
6 Install channels����������������������������������� 24
6.1 Automatically install channels ������������ 25
1 Important���������������������������������������������3
6.2 Manually install channels �������������������� 26
1.1 Safety ���������������������������������������������������� 3
6.3 Rearrange channels ���������������������������� 27
1.2 Screen care�������������������������������������������� 4
6.4 Rename channels�������������������������������� 27
1.3 Environmental care ������������������������������ 4
6.5 Uninstall or reinstall channels������������ 27
2 Your TV�������������������������������������������������5
2.1 TV overview������������������������������������������ 5
3 Get started�������������������������������������������7
3.1 Position the TV�������������������������������������� 7
3.2 Wall mount the TV ������������������������������ 7
3.3 Connect the antenna cable������������������ 9
3.4 Connect the mains cord ���������������������� 9
3.5 Manage cables�������������������������������������� 10
3.6 Insert the remote control batteries �� 10
6.6 Manually update the channel list�������� 27
6.7 Test digital reception�������������������������� 28
7 Connect devices��������������������������������� 29
7.1 Connection overview ������������������������ 29
7.2 Select connection quality�������������������� 30
7.3 Connect devices���������������������������������� 32
7.4 Setup devices�������������������������������������� 36
7.5 Use Philips EasyLink���������������������������� 36
7.6 Prepare TV for digital services������������ 37
3.7 Switch on the TV�������������������������������� 10
8 Technical specifications��������������������� 38
3.8 First time setup ���������������������������������� 10
9 Troubleshooting ������������������������������� 39
4 Use your TV ��������������������������������������11
9.1 General TV issues ������������������������������ 39
4.1 Switch your TV on/off or to standby 11
9.2 TV channel issues�������������������������������� 39
4.2 Watch TV�������������������������������������������� 12
9.3 Picture issues�������������������������������������� 39
4.3 Watch connected devices������������������ 12
9.5 HDMI connection issues�������������������� 40
4.4 Use teletext���������������������������������������� 13
9.6 PC connection issues ������������������������ 40
5 Use more of your TV�������������������������14
5.1 Remote control overview������������������ 14
9.7 Contact us ������������������������������������������ 40
9.4 Sound issues���������������������������������������� 40
5.2 Use TV menus ������������������������������������ 15
10 PSB Mode Instructions Guide ��������� 41
5.3 Adjust picture and sound settings������ 17
10.1 INTRODUCTION TO PBS MODE���� 42
5.4 Change to Shop or Home mode�������� 19
10.2 REMOTE CONTROL ������������������������ 42
5.5 Use advanced teletext features���������� 20
10.3 INITIAL SETUP ���������������������������������� 44
5.6 Use Electronic Programme Guide������ 20
10.4 DISPLAY SETUP MENUS�������������������� 45
5.7 Adjust feature settings������������������������ 21
10.5 STORE ������������������������������������������������ 50
5.8 Use subtitles���������������������������������������� 23
10.6 HOW TO POSITION YOUR TV�������� 50
5.9 Listen to digital radio channels ���������� 24
11 Index��������������������������������������������������� 52
5.10 Update your TV software ������������������ 24
2008 © Koninklijke Philips
Electronics N.V. All rights reserved.
Specifications are subject to change
without notice. Trademarks are
the property of Koninklijke Philips
Electronics N.V. or their respective
owners.
Philips reserves the right to change
products at any time without being
obliged to adjust earlier supplies
accordingly.
The material in this manual is
believed adequate for the intended
use of the system. If the product, or
its individual modules or procedures,
are used for purposes other than
those specified herein, confirmation
of their validity and suitability must
be obtained. Philips warrants that
the material itself does not infringe
any United States patents. No
further warranty is expressed or
implied.
Warranty
No components are userserviceable. Do not open or remove
covers to the inside of the product.
Repairs may only be done by Philips
Service Centres and official repair
shops. Failure to do so shall void
any warranty, stated or implied.
Any operation expressly prohibited
in this manual, any adjustments,
or assembly procedures not
recommended or authorised in this
manual shall void the warranty.
Pixel characteristics
This LCD product has a high
number of colour pixels. Although
it has effective pixels of 99,999% or
more, black dots or bright points of
light (red, green or blue) may appear
constantly on the screen. This is a
structural property of the display
(within common industry standards)
and is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many
products targeted at consumers,
which, like any electronic apparatus,
in general have the ability to emit
and receive electromagnetic signals.
One of Philips’ leading Business
Principles is to take all necessary
health and safety measures for
our products, to comply with all
applicable legal requirements and to
stay well within the EMF standards
applicable at the time of producing
the products.
Philips is committed to develop,
produce and market products that
cause no adverse health effects.
Philips confirms that if its products
are handled properly for their
intended use, they are safe to use
according to scientific evidence
available today.
Philips plays an active role in the
development of international EMF
and safety standards, enabling Philips
to anticipate further developments
in standardisation for early
integration in its products.
Mains fuse (UK only)
This TV is fitted with an approved
moulded plug. Should it become
necessary to replace the mains fuse,
this must be replaced with a fuse of
the same value as indicated on the
plug (example 10A).
1. Remove fuse cover and fuse.
2. The replacement fuse must
comply with BS 1362 and have
the ASTA approval mark. If the
fuse is lost, contact your dealer in
order to verify the correct type.
3. Refit the fuse cover.
In order to maintain conformity
to the EMC directive, the mains
plug on this product must not be
detached from the mains cord.
Copyright
VESA, FDMI and the VESA Mounting
Compliant logo are trademarks of
the Video Electronics Standards
Association.
® Kensington and Micro Saver
are registered US trademarks of
ACCO World Corporation with
issued registrations and pending
applications in other countries
throughout the world. All other
registered and unregistered
trademarks are the property of their
respective owners.
Important
Congratulations on your purchase and
welcome to Philips!
Read this user manual before you start to use
this product.
Pay close attention to this section and follow
the safety and screen care instructions. The
product warranty does not apply if damage is
caused by failing to follow these instructions.
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
The model and serial number of your TV can
be found on the back and side of the TV as well
as on the packaging.
• Do not insert any strange object into the
ventilation slot. This might lead to damage
of TV.
• To avoid risk of fire or electric shock, do
not place the TV, remote control or remote
control batteries near naked flame sources
(e.g. lighted candles) and other heat sources
including direct sunlight.
• Do not install the TV in a confined space
such as a bookcase. Leave a space of at
least 10cm (four inches) around the TV
for ventilation. Be sure air flow is not
obstructed.
• If placing the TV on a flat, solid surface be
sure to use only the supplied stand. Do not
move the TV if the stand is not properly
screwed to the TV.
• Wall mounting of the TV should only be
performed by qualified personnel. The TV
must only be mounted on an appropriate
wall bracket and on a wall that can safely
hold the weight of the TV. Improper wall
mounting can result in severe injury or
damage. Do not attempt to wall mount the
TV yourself.
• The apparatus must be connected to a
mains socket outlet with a protected
earthed connection.
• If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections and cause arcing or fire.
• If transporting the TV in low temperatures
(less than 5°C), open the box and wait until
the TV matches the ambient temperature
of the room before unpacking.
• Disconnect the TV from the mains and
antenna before lightning storms. During
lightning storms do not touch any part of
the TV, mains cord or antenna cable.
• To avoid short circuit, do not expose the
TV, remote control or remote control
batteries to rain or water.
• Be sure that you have full access to the
mains cord for easy disconnection of the
TV from the mains.
• Do not place vessels of water or other
liquids on top of or near the TV. Spilling
liquids on the TV can cause electric shock.
If liquids are spilt on the TV, do not operate
the TV. Immediately disconnect the TV from
the mains and have the TV checked by a
qualified technician.
• Permanent hearing loss can occur if you use
earphones or headphones at high volumes.
Though high volume may sound normal
over time, it can damage your hearing. To
protect your hearing, limit the amount of
time you use earphones or headphones at
high volume.
1.1 Safety
EN-3
EN
1
• When disconnecting the TV from the mains,
be sure to:
• T
urn off the TV, then the mains power
(if available).
• Unplug the mains cord from the mains
socket outlet.
teletext pages, black bars or stock market
tickers. If you must use stationary images,
reduce the screen contrast and brightness
to avoid screen damage.
1.3 Environmental care
Recycling your packaging
The packaging of this product is intended to
be recycled. Contact your local authorities for
information on how to recycle the packaging.
Disposing your used product
• Unplug the mains cord from the power
connector at the back of the TV. Always
pull the mains cord by the plug. Do not
pull the mains cord
1.2 Screen care
Your product is manufactured with high-quality
materials and components that can be recycled
and reused. When you see the crossed-out
wheel bin symbol attached to a product, it
means the product is covered by the European
Directive 2002/96/EC:
Do not dispose your used product with
household waste. Ask your dealer for
information on how to safely dispose of the
product. Uncontrolled waste disposal harms
both the environment and human health.
Disposing used batteries
• Turn off and unplug the mains cord before
cleaning the screen. Clean the screen with a
soft, dry cloth. Do not use substances such
as household cleaning agents as these may
damage the screen.
The supplied batteries do not contain
mercury or cadmium. Dispose supplied and all
other used batteries according to your local
regulations.
• To avoid deformations or colour fading,
wipe off water droplets as soon as possible.
Power consumption
• Do not touch, push, rub or strike the
screen with hard objects as this may
damage the screen permanently.
• Where possible, avoid stationary images
that remain on-screen for extended periods
of time. Examples include screen menus,
EN-4
The TV consumes minimal energy in standby
mode to minimise environmental impact. Active
power consumption is displayed at the back of
the TV.
For more product specifications, see the
product leaflet at www.philips.com/support.
2
Your TV
Side connectors
EN
This section gives you an overview of
commonly-used TV controls and functions.
2.1 TV overview
Side controls and indicators
VOLUME
4
3
MENU
PROGRAM
2
Use the TV side connectors to connect to
mobile devices such as a high-definition
camcorder or game console. You can also
connect a pair of headphone.
1
POWER
Back connectors
5
1. POWER
2. PROGRAM +/-
IR LINK
EXT 3
3. MENU
4. VOLUME +/5. Power indicator/remote control sensor
Use the TV back connectors to connect to the
antenna and permanent devices such as a highdefinition disc player, DVD player or VCR.
DDNote
For more information about connections,
see Section 7 Connect devices.
EN-5
Remote control
1. . Power
2. GUIDE
1
2
3
AV
4
ALARM
ALARM
Û
Û
ON
OFF
3. TELETEXT
4. Colour keys
From left, red, green, yellow, blue
5. Í, Æ, Î, ï, OK
Navigation or cursor keys
6. MENU
7. P +/Program up or down
5
8. ”$ +/Volume up or down
For advanced information about the remote
control, see Section 5.1 Remote control overview.
SLEEP
6
7
8
EN-6
Get started
3.2 Wall mount the TV
DDNote
Refer to the Quick Start Guide for stand
mounting instructions.
BBWARNING
Wall mounting of the TV should only
be performed by qualified installers.
Koninklijke Philips Electronics N.V.
bears no responsibility for improper
mounting that results in accident or
injury.
3.1 Position the TV
BBStep 1 Purchase a VESA-compatible
wall bracket
This section helps you position and install the
TV and supplements the information provided
in the Quick Start Guide.
In addition to reading and understanding the
safety instructions in Section 1.1, consider the
following before positioning your TV:
• The ideal viewing distance for watching TV
is three times its screen size.
• Position the TV where light does not fall on
the screen.
• Connect your devices before you position
your TV.
• Your TV is equipped with a Kensington
Security Slot at the back of the TV. If
connecting an anti-theft Kensington lock
(not supplied), position the TV within reach
of a permanent object (such as a table) that
can be easily attached to the lock
Depending on the size of your TV screen,
purchase one of the following wall brackets:
TV screen
size
(inches/
cm)
VESASpecial
compatible
instructions
wall bracket
type
(millimeters)
22”/55.9cm
Fixed 100 x 100
None
19”/48.4cm
Fixed 100 x 100
None
Step 2 Remove the TV stand
DDNote
These instructions are only applicable to
TV models with mounted stands. If your TV
stand is not mounted, skip to Step 3 Connect
cables.
1. Carefully place the TV face down on a
flat, stable surface that is covered by soft
cloth. The cloth should be thick enough to
protect your screen.
IR LINK
EXT 3
2. Using a cross-head screwdriver (not
supplied), unscrew the four bolts that
secure the stand to the TV. (19” has four
bolts, 22” has three bolts)
EN-7
EN
3
compatible wall bracket documentation for
instructions.
1. Locate the four mounting nuts at the back
of the TV.
3. Firmly pull the stand from the bottom of
the TV. Place both the stand and bolts in a
secure location for future reinstallation.
2. Align the plate/bracket to the four
mounting nuts, placing the spacers between
the plate/bracket and the mounting nuts.
Step 3 Connect cables
Connect the antenna cable, mains cord and
all other devices to the back of the TV as
described in the following sections.
3. Using a spanner, insert the bolts through
the plate/bracket and spacers, tightly
securing the bolts to the mounting nuts.
x4
Step 4 Secure the VESA-compatible wall
bracket to the TV
BBWARNING
Only use the bolts (M4 for all models)
and spacers (4cm) to secure the
VESA-compatible wall bracket to your
TV.
The bolts (not supplied) are designed
to match the weight of your TV;
spacers (not supplied) are designed
for easy cable management.
DDNote
Depending on your VESA-compatible wall
bracket, you may need to separate the
mounting plate from the wall bracket for
easier installation. Refer to your VESAEN-8
4. Continue with the instructions provided
with your VESA-compatible wall bracket.
1. Locate the TV ANTENNA connector at
the back of the TV.
3.4 Connect the mains cord
BBWARNING
Verify that your mains voltage
corresponds with the voltage printed
at the back of the TV. Do not insert
the mains cord if the voltage is
different.
To connect the mains cord
DDNote: The location of the mains connector
according to TV model.
1. Locate the AC IN mains connector at the
back or on the bottom of the TV.
2. Connect one end of an antenna cable
(not supplied) to the TV ANTENNA
connector. Use an adaptor if the antenna
cable does not fit.
3. Connect the other end of the antenna
cable to your antenna outlet, ensuring that
the cable is tightly secured at both ends.
2. Connect the mains cord to the AC IN
mains connector.
3. Connect the mains cord to the mains,
ensuring that the cord is tightly secured at
both ends.
EN-9
EN
3.3 Connect the antenna cable
3.5 Manage cables
3.7 Switch on the TV
Route your mains cord, antenna cable and all
other device cables through the cable holder
(1) at the back of the TV.
The first time you switch on the TV, check that
the mains cord is properly connected. When
ready, then press POWER on the side of the
TV.
1
DDNote
Certain TV models require you to press and
hold POWER for up to two seconds.Your
TV may take up to 15 seconds to start.
3.8 First time setup
3.6 Insert the remote control
batteries
1. Slide the battery cover off the back of the
remote control.
When you turn on the TV set for the first
time, a menu is displayed on screen. This
menu prompts you to select the Country and
Language for the menus:
If the menu is not displayed, press the MENU
key to display the menu.
1. Press Î or ï to select your language, and
press OK to confirm your choice.
2. Press Î or ï to select your country, and
press OK to confirm your choice.
2. Insert the two supplied batteries (Size AAA,
Type LR03). Be sure the + and - ends of the
batteries line up with the markings inside
the case.
3. Slide the cover back into position.
DDNote
Remove the batteries if not using the
remote control for an extended period of
time.
The search starts automatically. All available
TV programmes and radio stations are
stored. This operation takes a few minutes.
The display shows the progress of the
search and the number of programs
found. At the end of the search, the menu
disappears.
DDNote
If no programme is found, consult
the possible solutions see section 9
troubleshooting.
If the transmitter or cable network sends
the automatic sort signal, the programs will
be numbered correctly. In this case, the
installation is complete.
3. If this is not the case, use the Channel
setting menu to number the programs
correctly.
EN-10
Use your TV
This section helps you perform basic TV
operations. Instructions on advanced TV
operations are provided in Section 5 Use more
of your TV.
4.1 Switch your TV on/off or to
standby
EETip
Though your TV consumes very little power
when in standby, energy continues to be
consumed as long as the mains remain
connected and powered. When not in use
for extended periods of time, switch off and
disconnect the TV from the mains.
Switch on from standby
Switch on your TV
• If the power indicator (1) is off, press
POWER on the side of the TV.
AV
MENU
PROGRAM
POWER
1
Switch off your TV
ALARM
ALARM
• If the power indicator is in standby (red),
press . on the remote control.
DDNote
If you cannot locate your remote control
and you want to switch on the TV from
standby, press PROGRAM +/- on the side
of the TV.
• Press POWER on the side of the TV. The
power indicator (1) switches off.
Switch to standby
AV
ALARM
ALARM
• Press . on the remote control. The power
indicator switches to standby (red).
EN-11
EN
4
4.2 Watch TV
4.3 Watch connected devices
1. Switch on the device.
Switch channels
2. Press AV on the remote control.
AV
ALARM
AV
ALARM
1. Press a number (1 to 999) or press P +/on your remote control.
3. Press Î or ï to select the input your
device is connected to.
2. Press PROGRAM +/- on the side controls
of the TV.
4. Press OK to select the device.
3. Press ∏ Select a picture format..
Adjust volume
SLEEP
1. Press ” + or - on the remote control,
or Press VOLUME + or - on the side
controls of your TV.
2. Press [ on the remote control to mute
the sound. Press [ again to unmute on
the sound.
EN-12
4.4 Use teletext
EN
1. Press TELETEXT on the remote control.
The main index page appears.
AV
ALARM
ALARM
Û
Û
• To select a page with the remote control:
• Enter the page number with the number
keys.
• Press P +/- or Î ï to view the next or
previous page.
• Press a colour key to select one of the
colour coded items at the bottom of the
screen.
2. Press TELETEXT again to switch off
teletext.
DDNote (for UK users only)
Some digital TV channels offer dedicated
digital text services (for example, BBC1).
For advanced information on teletext, see
Section 5.5 Use advanced teletext features.
EN-13
5
Use more of your TV
5.1 Remote control overview
1
2
19
18
17
16
AV
ALARM
ALARM
Û
Û
ON
OFF
SLEEP
15
3
4
5
6
5. Colour keys
Selects tasks or teletext pages.
6. ALARM OFF
Disable Alarm status- Not applicable for
this model.
7. OK
Accesses the All channels menu or
activates a setting.
8. Í, Æ, Î, ï
Navigate the menu.
7
8
9. SLEEP
Display the sleep timer menu and adjust
the sleep timer.
9
10. P +/Switches to the next or previous channel.
10
14
11
13
4. SUBTITLE
Activates or deactivates subtitles.
12
11. Number keys
Selects a channel, page or setting.
12. ∏
Selects a picture format.
13. MHEG CANCEL
Cancels digital text or interactive services
(UK only).
14. [
Mutes or restores sound.
15. ” +/Increases or decreases volume.
16. MENU/EXIT
Toggles the menu on or off.
1. .
Switches the TV on from standby or back
to standby.
2. GUIDE
Toggles the Electronic Program Guide on
or off Only active with digital channels.
3. SOURCE
Selects connected devices.
EN-14
17. ALARM ON
Display the Alarm menu-not applicable for
this model.
18. TELETEXT
Toggles teletext on or off.
19.
Splits the current channel or source on the
left of the screen. Teletext appears on the
right.
Use the main menu
On-screen menus help you install your TV,
adjust picture and sound settings and access
other features. This section describes how to
navigate the menus.
The following steps of adjusting brightness is
one example to show how to use the main
menu.
ON
OFF
Access the main menu
1. Press MENU on the remote control to
display the main menu.
SLEEP
SLEEP
1. Press MENU on the remote control to
display the TV menu.
PHILIPS
TV Menu
The following menu appears.
PHILIPS
TV Menu
Smart settings
Smart settings
Personal
Picture
Vivid
Sound
Standard
Features
Movie
Install
Power saver
Smart settings
Smart settings
Personal
Picture
Vivid
Sound
Standard
Features
Movie
Install
Power saver
2. Press ï to select Picture.
PHILIPS
TV Menu
2. Press Î or ï to move the cursor to the
following items:
• Smart settings
• Picture
• Sound
Smart settings
Smart settings
Contrast
Picture
Brightness
Sound
Color
Features
Sharpness
Install
Tint
Color temperature
Picture format
Noise Reduction
• Feature
• Install
3. Press Æ or OK to select an item.
4. Press MENU to exit.
EN-15
EN
5.2 Use TV menus
3. Press Æ to enter the Picture settings.
PHILIPS
Picture
Brightness
Contrast
98
Brightness
47
Color
52
Sharpness
4
Tint
0
Color temperature
Picture format
Noise reduction
4. Press ï to select Brightness.
PHILIPS
Picture
Brightness
Contrast
98
Brightness
47
Color
52
Sharpness
4
Tint
0
Color temperature
Picture format
Noise reduction
5. Press Æ to enter the Brightness setting.
Brightness
6. Press Î or ï to adjust the setting.
7. Press Í to return to the Picture settings
or press MENU to exit.
DDNote
More choices are available when digital
channels are installed and broadcast.
EN-16
Adjust picture settings
1. Press MENU on the remote control and
select Picture.
PHILIPS
TV Menu
Smart settings
Smart settings
Contrast
Picture
Brightness
Sound
Color
Features
Sharpness
Install
Tint
Color temperature
Picture format
Noise Reduction
2. Press Æ to enter the list.
3. Press Î or ï to select a setting:
• Contrast: Changes the level of bright
parts in the picture keeping the dark
parts unchanged.
• Brightness: Changes the level of light in
the picture.
• Colour: Changes the level of saturation.
• Sharpness: Changes the level of
sharpness of fine details.
• Tint: Changes the colours to reddish
or bluish.
• Noise reduction: Filters and reduces
the noise in the picture. Select ON to
enable or OFF to disable this function
Use smart settings
Apart from manually adjusting picture settings,
you can use Smart settings to set your TV to
a predefined picture and sound setting.
1. Press MENU on the remote control and
select Smart settings.
2. Press Æ to enter the list.
3. Press Î or ï to select one of the following
settings:
• Personal: Applies manually selected
picture and sound settings.
• Vivid: Applies brilliant picture and
sound settings suitable for bright
surroundings
• Standard: Applies natural picture and
sound settings suitable for most living
room conditions.
• Movie: Applies dynamic picture and
sound settings suitable for a complete
cinematic experience.
• Power saver: Applies lower picture
brightness and smaller sound for power
economy.
4. Press OK to store your selection.
• Colour temperature: There are 3
items can be selected. Press Æ to enter
the select menu. Press Î or ï to move
to the item. Press OK to change to the
selected colour temperature: Normal
(balanced), Warm (redder), Cool
(bluer).
• Picture format: See Section Change
picture format.
EN-17
EN
5.3 Adjust picture and sound
settings
• Movie Expand 16:9 (Not for HD)
Change picture format
Scales the classic 4:3
format to 16:9.
Change the picture format to suit your content.
1. Press ∏ (PICTURE FORMAT) on your
remote control. Alternatively, press MENU
and select Picture > Picture format.
DDNote
Constant use of the 16:9 picture format
can cause screen distortion.
• Wide screen
Stretches the classic
4:3 format to 16:9.
2. Press Î or ï to select one of the following
picture formats:
• Super zoom (Not for HD)
Removes the black
bars on the side of
4:3 broadcasts with
minimal distortion.
• 4:3 (Not for HD)
Displays the classic
4:3 format.
DDNote
Constant use of the 4:3 picture format can
cause screen distortion.
• Movie expand 14:9 (Not for HD)
Scales the classic 4:3
format to 14:9.
EN-18
• Subtitle Zoom
Scales the classic 4:3
format to 16:9 and
capable to move up
and down by press
Î or ï keys to
show subtitle.
This section describes how to adjust sound
settings.
1. Press MENU on the remote control and
select Sound.
2. Press Æ to enter the list.
• Mono/Stereo: If stereo broadcasting
is available, choose between mono or
stereo.
• Auto volume leveling: Reduces
sudden volume changes, for example,
during commercials or when switching
from one channel to another. Select On
or Off.
PHILIPS
TV settings
Sound
Smart settings
Settings
Picture
Incredible surround
Sound
Volume - visually impaired
Features
Audio language
Install
Dual l-ll
Mono/Stereo
Auto volume leveling
5.4 Change to Shop or Home
mode
1. Press MENU on the remote control and
select Install > Preferences > Location.
2. Press Æ to enter the Location menu.
3. Press Î or ï to select the TV mode:
3. Press Î or ï to select one of the following
settings:
• Settings:
-Treble:To adjust the treble value to fit
your best listening.
-Bass: To adjust the bass value to fit
your best.
-Balance: Sets the balance of the left
and right speakers to best fit your
listening position.
• Shop: Sets smart settings to Vivid, ideal
for a shop environment. The flexibility to
change settings is limited.
• Home: Gives home users the full
flexibility to change all TV settings.
4. Press OK to confirm.
5. Press MENU to exit.
• Incredible surround: Automatically
switches the TV to the best surround
sound mode available from a broadcast.
Select On or Off.
• Volume-visually impaired: Adjusts the
aids on volume settings.
• Audio language: Available for digital
channels only, when multiple languages
are broadcast. Lists available audio
languages.
• Dual I-II: If available, choose between
two different languages.
EN-19
EN
Adjust sound settings
5.5 Use advanced teletext
features
5.6 Use Electronic Programme
Guide
Your TV has a 100 page memory that stores
broadcasted teletext pages and subpages.
EPG is an on-screen guide that displays
scheduled digital TV programmes. This guide is
not available with analogue channels. You can
navigate, select and view programmes.
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1. Press TELETEXT on the remote control.
There are two types of EPG, ‘Now and Next’
and ‘7 or 8 day’ EPG. ‘Now and Next’ is
always available but the ‘7 or 8 day’ EPG is
only available in certain countries.
2. Select a teletext page.
With the EPG menu you can:
3. Press Í or Æ to select a subpage.
• View a list of currently broadcast digital
programmes.
Use dual screen teletext
• View upcoming programmes.
Enabling dual screen teletext displays your
channel or source on the left of the screen.
Teletext is displayed on the right.
• Group programmes.
1. Press (DUAL SCREEN) on your remote
control to enable dual screen teletext.
2. Press (DUAL SCREEN) again to disable
dual screen teletext.
CCCaution
Digital text services are blocked when
subtitles are broadcasted and Subtitle On
is set in the Features menu as described in
Section 5.8 Subtitles.
Switch on EPG
DDNote
The first time you use EPG, you may be
prompted to perform an update. If so,
follow the on-screen instructions.
1. Press GUIDE
on the remote
control,the “Now and Next” EPG will
appear and the detailed information about
the current programme is displayed.
AV
EN-20
ALARM
ALARM
Û
Û
PHILIPS
Viewing Date: 01/03/2002
Current Time: 01/03/2002 Thu 16:49:22
5.7 Adjust feature settings
1. Press MENU on the remote control and
select Features.
2. Press Æ to enter.
2
BBC TWO
16:30
Ready Steady Cook
7
BBC CHOICE
17:15
The Weakest Link
10
BBCi
11
BBC NEWS 24
12
BBC PARLMNT
Smart settings
Timer
13
BBC Knowledge
Picture
Auto lock
800
Eurosport
Sound
Subtitle
801
TERRA NOVA
Features
Subtitle language
Install
Common interface
PHILIPS
TV settings
16:30 ~ 17:15
Prev Day
Next Day
Detail
Features
Filter
3. Use the colour keys to view 7 or 8 day
EPG.
• Prev Day (Red): List the previous day’s
EPG.
3. Press Î or ï to select one of the following
settings:
• Next Day (Green): List the next day’s
EPG.
• Timer
• Detail (Yellow): Display the description
about this program.
• Subtitle
• Subtitle language
• Filter (Blue): Group programs.
PHILIPS
Viewing Date: 01/03/2002
• Auto lock
• Common interface
Current Time: 01/03/2002 Thu 16:49:22
Use timers
Take a couple of chefs, Paul Rankin and Phil vickery, add two
contestants, throw in some ingredients and garnish liberally with
Ainsley Harriott. Simmer and enjoy.
Press MENU on the remote control and select
Features > Timer > Clock.
• Auto clock mode: You can set current
clock by manual or automatic:
Test
Prev Page
Next Page
Return
• Manual: Allows you to enter the
current time by yourself
• Automatic
4. Press
GUIDE to exit the EPG.
• T
ime zone: Adjusted time is based on
GMT.
EN-21
EN
2. Use the colour keys on the remote control
to activate available actions.
Automatically switch the TV to standby
(Sleeptimer)
3. Use Î or ï , Æ or Í to select and enter
the menu items to set.
Sleeptimer switches the TV to standby after a
defined period of time.
4. Press OK to confirm.
1. Press MENU on the remote control and
select Features > Timer > Sleeptimer.
2. Press Æ to enter the Sleeptimer menu
3. Press Î or ï to set the sleep time up to
180 minutes in steps of five minutes. If set
to zero minutes, the Sleeptimer is switched
off.
4. Press OK to activate the Sleeptimer.
DDNote
You can always switch off your TV earlier or
reset Sleeptimer during the countdown.
Automatically switch the TV on
(Start time)
Start time switches the TV to a specified
channel at a specified time, from standby.
1. Press MENU on the remote control and
select Features > Timer > Start time.
2. Press Æ to enter the start time menu.
3. Use Î or ï, Æ or Í to select and enter
the menu items to set.
4. Press OK to confirm your choice.
5. Press MENU to exit.
EETip
To switch off Start time, select Off in the
Start time menu.
5. Press MENU to exit.
DDNote
You can always switch off your TV earlier or
reset Sleeptimer during the countdown.
Lock TV channels or connected devices
(Auto Lock)
Lock TV channels or connected devices with
a four digit code to prevent children from
watching unauthorised content.
To set or change the Auto Lock code
1. Press MENU on the remote control and
select Features > Auto lock > Change
code.
2. Press Æ to enter the code setup.
3. Enter your code with the number keys.
The Features menu reappears with a
message confirming that your code is
created or changed.
EETip
If you forget your code, enter ‘0711’ to
override any existing codes.
To enter the Auto Lock menu
1. Press MENU on the remote control and
select Features > Auto Lock and press
Æ to enter your code.
2. Enter your code with the number keys.
Automatically switch the TV off
(Stop time)
To unlock all channels and connected
devices
Stop time switches the TV to standby at a
specified time.
1. In the Auto Lock menu, select Clear all.
1. Press MENU on the remote control and
select Features > Timer > Stop time.
2. Press Æ to enter the Stop time menu.
EN-22
2. Press OK.
1. In the Auto Lock menu, select Lock
program.
2. Press Æ to enter.
3. Press Î or ï to select channel lock.
5.8 Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts,
you have the additional option of selecting a
preferred subtitle language.
4. Press Æ to lock or unlock the channel.
1. Press MENU on the remote control and
select Features > Subtitle.
To set parental ratings
2. Press Æ to enter the list.
Some digital broadcasters rate their
programmes according to age. You can set your
TV to display only programmes with age ratings
higher than your child’s.
1. In the Auto Lock menu, select Parental
rating.
2. Press Æ to enter.
PHILIPS
TV settings
Features
Smart settings
Timer
Picture
Auto lock
Sound
Subtitle
Features
Subtitle language
Install
Common interface
3. Press Î or ï to select age rating.
4. Select the age and Press OK.
5. Press Menu to exit the menu.
3. Press Î or ï to select On to display
subtitles always or On during mute to
display subtitles only when the sound is
muted with the [ key on the remote
control.
4. Press OK to return to the Features menu.
Select a subtitle language on digital TV
channels
DDNote
When you select a subtitle language on a
digital TV channel as described below, the
preferred subtitle language set in the Install
menu is temporarily overruled.
1. Press MENU on the remote control and
select Features > Subtitle Language.
2. Press Æ to enter the list of available
languages.
3. Press Î or ï to select a subtitle language.
4. Press OK.
EN-23
EN
To lock or unlock one or more channels
and connected devices
5.9 Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation. To reorder the digital radio
channels, see Section 6.3 Rearrange the channels.
1. Press OK on the remote control. The All
channels menu is displayed.
2. Use the number keys to select a radio
channel.
3. Press OK.
5.10 Update your TV software
Philips continuously tries to improve its
products and we strongly recommend that
you update the TV software when updates are
available. Check www.philips.com/support for
availability.
Check your current software version
1. Press MENU on the remote control and
select Install Æ Current software info.
Update software (digital broadcasts)
If using (DVB-T) digital broadcasts, your TV
automatically receives software updates. If you
receive a message on-screen prompting you to
update your software:
• Select Now (recommended) to update the
software immediately.
• Select Later to be reminded to update the
software later.
• Select Cancel to exit the update (not
recommended).
EN-24
6
Install channels
The first time you setup your TV, you are
prompted to select an appropriate menu
language and to perform automatic installation
of TV and digital radio channels (if available).
This chapter provides instructions on how
to reinstall channels as well as other useful
channel installation features.
DDNote
Re-installing channels modifies the All
channels list.
DDNote
The channel sequence can change during
installation. This TV accepts both digital and
analog broadcasting.
The following rules are used to arrange
channel numbers.
- Digital channel numbers range from
1 to 899. The sequence of channels is
determined by the broadcaster.
- Analog channel numbers range from 900
to 999.
- If digital broadcasting is not available,
analog channels number start automatically
from one. See the label “Digital TV Country
Compatibility” on the back of your TV to
verify whether your TV supports DVB-T in
your country.
To reorder stored channels, see Section 6.3
Rearrange channels.
This section describes how to search and store
channels automatically. Instructions are for both
digital and analogue channels.
PHILIPS
Installation
Languages
Languages
Menu language
Country
Preferred audio language
Channel install...
Preferred subtitle language
Preferences
Hearing impaired
Source labels
Audio description
Decoder
Preferred audio format
Current software info
Factory reset
• Audio description: If available, select On
to hear the audio description with your
preferred language.
• Preferred audio format Select an audio
format for the best sound reproduction:
- If you have connected a home theater
system, select Advanced.
- Otherwise, select Standard.
DDNote
Do not select Advanced unless you have
connected a home theatre system. If
you select Advanced, you must set other
options.
Step 2 Select your country
Step 1 Select your menu language
1. Press MENU on the remote control and
select Install > Languages.
2. Press Æ to enter Menu language.
3. Press Î or ï to select your language.
4. Press OK to confirm.
5. Press Í to return to the Installation
menu.
In addition to menu language, you can
configure the following language settings via the
Languages menu (digital channels only):
• Preferred audio language: Select
one of the available audio languages as
your preferred audio language. For more
information, see Section 5.3 Adjust sound
settings.
• Preferred subtitles language: Select
one of the available subtitle languages as
your preferred subtitle language. For more
information, see Section 5.8 Select a subtitle
language on digital TV channels.
• Hearing impaired: If available, select On
to display the hearing impaired subtitle with
your preferred language.
Select the country where you are located. The
TV installs and arranges channels according to
your country.
1. In the Installation menu, press ï to select
Country.
2. Press Æ to enter the list.
3. Press Î or to select your country.
4. Press Í to return to the Installation
menu.
Step 3 Install channels
Your TV searches and stores all available digital
and analogue TV channels as well as all available
digital radio channels.
1. In the Installation menu, press Î or ï
to select Channel install. > Automatic
installation.
2. Press Æ to select Start now.
3. Press OK.
4. Press the green key to start.
The installation may take a few minutes.
5. When the channel search is completed,
press the red key to return to the
Installation menu.
6. Press MENU to exit.
EN-25
EN
6.1 Automatically install
channels
EETip
When digital TV channels are found, the
list of installed channels may display empty
channel numbers. If you want to rename,
reorder or uninstall stored channels, see
Section 6.3 Rearrange channels.
2. Press Æ to enter the Search menu.
3. Press the red key and the number keys on
the remote control to enter the three digit
frequency. Alternatively, press the green
key to automatically search for the next
channel.
6.2 Manually install channels
4. Press Í when the new channel is found.
This section describes how to search and store
analogue TV channels manually. If you want to
search and store digital channel, please kindly
refer to Section 6.7. Test digital reception
5. Select Store as new channel, and press
Æ to enter.
Step 1 Select your system
DDNote
Skip to Step 2 Search and store new TV
channels if your system settings are correct.
1. Press MENU on the remote control
and select Install > Channel install. >
Analogue: Manual installation.
2. Press Æ to enter the Channel
installation menu, and System is
highlighted.
3. Press Æ to enter the System list.
Analog: Manual installation
Automatic installation
System
Installation update
Search
The channel number will is shown on the
screen.
7. Press MENU to exit.
Fine tune analogue channels
You can manually fine tune analogue channels
when reception is poor.
1. Press MENU on the remote control and
select Install > Channel installation >
Analogue: manual installation > Fine
tune.
2. Press Æ to enter the Fine tune menu.
PHILIPS
Channel installation
6. Press OK to save this channel.
Digital: Test reception
Fine tune
Analog: Manual installation
Store current channel
Rearrange
Store as new channel
3. Press Î or ï to adjust the frequency.
4. Press Í when done.
5. Select Store current channel to store
the fine tuned channel under the current
channel number.
6. Press Æ to enter.
7. Press OK. Done appears.
8. Press MENU to exit.
4. Press Î or ï to select your country or
region.
5. Press Í to return to the Channel
installation menu.
Step 2 Search and store new TV channels
1. Press MENU on the remote control and
select Install > Channel installation
> Analogue: Manual installation >
Search.
EN-26
1. Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï to select the channel you
want to rearrange.
6.5 Uninstall or reinstall
channels
You can uninstall a stored channel or reinstall
an uninstalled channel.
1. Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
4. Press the yellow key to move the channel
up the list, or press the blue key to move
the channel down the list.
2. Press Æ to enter the Rearrange list.
5. Press MENU to exit.
4. Press the green key to uninstall or reinstall
the channel.
6.4 Rename channels
5. Press MENU to exit.
1. Press MENU on the remote control and
select Install > Channel installation >
Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï in the Rearrange list to
select the channel you want to rename.
4. Press the red key.
5. Press Í and Æ to select characters or Î
and ï to change the characters. Space,
numbers (0-9) and other special characters
are located between z and A.
6. Press the green key or OK to finish.
EETip
Delete all characters by pressing the yellow
key. Delete only the highlighted character by
pressing the blue key.
3. Press Î or ï to select the channel you
want to uninstall or reinstall.
6.6 Manually update the channel
list
You can manually update the channel list.
1. Press MENU on the remote control and
select Install > Channel installation >
Installation update.
2. Press Æ to enter the Installation update
menu. Start now is highlighted.
3. Press OK.
4. Press the green key to start the update.
This may take a few minutes.
5. When the update is complete, press
the red key to return to the Channel
installation menu.
6. Press MENU to exit.
EN-27
EN
6.3 Rearrange channels
6.7 Test digital reception
If using digital broadcasts, you can check the
quality and signal strength of digital channels.
This allows you to reposition and test your
antenna or satellite dish.
1. Press MENU on the remote control and
select Install > Channel installation >
Digital: Test reception.
2. Press OK.
3. Press the green key to automatically start
the test or manually enter the frequency of
the channel you want to test. If the signal
quality and strength is poor, reposition the
antenna or satellite dish and retest.
4. When complete, press the yellow key to
store the frequency.
5. Press the red key to return to the
Channel installation menu.
6. Press MENU to exit.
DDNote
If you have further problems with the
reception of your digital broadcast, contact
a specialised installer.
EN-28
Connect devices
EN
7
7.1 Connection overview
7
6
13
1
8
9
IR LINK
10
EXT 3
2
3
4
USB
5
11
12
Back connectors
1. EXT 1: First SCART connector for
DVD players, VCRs, digital receivers,
game consoles and other SCART devices.
Supports Audio L/R, CVBS in/out, RGB.
Side connectors
8. Headphones: Stereo mini-jack.
9. VIDEO: Video input cinch connector for
composite devices.
2. EXT 3: Component video (Y Pb Pr) and
Audio L/R input connectors for DVD
players, digital receivers, game consoles and
other component video devices.
10. AUDIO L/R: Audio L/R input connectors
for composite and S-Video devices.
3. IR LINK
Connector for an IR Link Compliant device.
(e.g. set-top box).
DDNote
Item9, Item10, Item11 these 3 ports all are
under EXT 2.
4. TV ANTENNA
5. HDMI: HDMI input connectors for Blu-ray
Disc players, digital receivers, game consoles
and other high-definition devices.
11.USB: USB connector for USB service.
12. HDMI Side: Additional HDMI connector
for mobile high-definition devices.
13. COMMON INTERFACE: Slot for
Conditional Access Modules.
6. AUDIO IN: Mini-jack connector for PC
audio in.
7. PC IN: VGA connector for PC in.
EN-29
7.2 Select connection quality
This section describes how you can enhance
your audio visual experience by connecting
your devices with the best possible connectors.
After connecting your devices, be sure to
enable them as described in Section 7.4 Setup
devices.
HDMI - Highest quality
HDMI produces the best audio visual quality
possible. Both audio and video signals are
combined in one HDMI cable, providing an
uncompressed, digital interface between your
TV and HDMI devices. You must use HDMI to
experience full high-definition video. You must
also use HDMI cables to enable Philips EasyLink
as described in Section 7.5 Use Philips EasyLink.
Component (Y Pb Pr) - Higher quality
Component (Y Pb Pr) video provides better
picture quality than S-Video or composite
video connections. Though component video
supports high-definition signals, picture quality
is lower than HDMI and is analogue.
When connecting a component video cable,
match the cable colours to the EXT 3
connectors on the back of the TV. Also, connect
a Audio L/R cable to the red and white Audio
L/R input connectors at EXT 3.
• Component video cable- Red, Green, Blue
• Audio L/R cable - Red, White
SCART - Good quality
DDNote
Philips HDMI supports HDCP (Highbandwidth Digital Contents Protection).
HDCP is a form of Digital Rights
Management that protects high definition
content in DVD or Blu-ray Discs.
SCART combines audio and video signals in
one cable. Audio signals are stereo, while video
signals can be composite or S-Video quality.
SCART does not support high-definition video
and is analogue. One SCART connectors is
provided on the TV, EXT 1.
EN-30
Composite - Basic quality
EN
Composite video provides basic analogue
connectivity, usually combining a (yellow) video
cinch cable with (red and white) Audio L/R
cinch cable. Match the cable colours when
connecting to the composite Video and Audio
L/R input connectors on the side of the TV.
Composite audio/video cable - Yellow, red and
white
EN-31
7.3 Connect devices
This section describes how to connect various devices with different connectors and supplements
examples provided in the Quick Start Guide.
CCCaution
Disconnect the mains cord before connecting devices.
DDNote
Different types of connectors may be used to connect a device to your TV, depending on
availability and your needs.
Blu-ray Disc player
For full high-definition video, connect a HDMI cable as illustrated:
IR LINK
HDMI
OUT
EXT 3
Blu-ray Disc player
DVD player
For DVD video, connect a SCART cable as illustrated:
IR LINK
EXT 3
DVD Player
EN-32
To receive analogue channels via antenna and digital channels via a satellite receiver, connect an
antenna cable and SCART cable as illustrated:
IR LINK
EXT 3
Satellite receiver
HD digital receiver
To receive analogue channels via antenna and digital channels via a HD digital receiver, connect two
antenna cables and HDMI cable as illustrated:
IR LINK
HDMI
OUT
OUT
IN
EXT 3
HD Digital receiver / HD Satellite receiver
Combined DVD recorder and digital receiver
To receive analogue channels via antenna and record programs on a combined DVD recorder and
digital receiver, connect two antenna cables and one SCART cable as illustrated
IR LINK
OUT
IN
EXT 3
DVD Recorder / Digital receiver
EN-33
EN
Satellite receiver
Separate DVD recorder and receiver
To receive analogue channels via antenna and record programmes on a separate DVD recorder
and receiver, connect three antenna cables and one SCART cables as illustrated:
IR LINK
EXT 3
OUT
IN
DVD Recorder / Receiver / Cable box
DVD recorder and Set-top box
To receive analogue channels via antenna, output sound to Set-top box and record programmes
on a DVD recorder, connect two antenna cables, one SCART cable and two digital audio cables as
illustrated:
IR LINK
EXT 3
OUT
DVD Recorder
IN
IR LINK
IN
Set-top box
DDNote
If using a Set-top box or other audio system, the best synchronisation between images and
sound is achieved by connecting the audio signal from your playback device to the TV first.
Subsequently, channel the audio signal to the Set-top box or audio device via the audio
connectors on the back of the TV.
EN-34
The most practical connection for a mobile
game console or camcorder may be at the
side of the TV. You can, for example, connect
the game console or camcorder to VIDEO and
AUDIO L/R connectors at the side of the TV.
A HDMI connector is also available for highdefinition devices.
2. Connect a Mini-jack audio cable from your
PC to the AUDIO IN mini-jack connector
at the back of the TV.
VGA
USB
VGA
A permanent game console or camcorder can
be connected to a HDMI connector or EXT 3
(component) connectors at the back of the TV.
Personal Computer
Before connecting the PC:
• Set the PC monitor refresh rate to 60Hz.
See Section 8 Technical specifications for a list
of computer resolutions.
• Change the TV picture format to Wide
Screen as described in Section 5.3 Change
picture format.
To connect a PC to the back of the TV
1. Using a VGA cable connect to PC IN
connect on the back of your TV.
EN-35
EN
Game console or camcorder
7.4 Setup devices
7.5 Use Philips EasyLink
Assign a channel decoder
Decoders that decode channels can be
connected to SCART. You have to assign the
TV channel as a channel to be decoded. Then
assign the connection where the decoder is
connected.
Your TV supports Philips EasyLink, which
enables one-touch play and one-touch standby
between EasyLink-compliant devices. Compliant
devices must be connected to your TV via
HDMI and assigned as described in Section 7.4.1
Assign devices to connectors.
1. Press MENU on the remote control and
select Install > Decoder.
Enable or disable EasyLink
PHILIPS
TV menu
Install
Decoder
Language
1 ......
Country
2 ......
Channel installation
Preferences
Source labels
Decoder
Current software info
Factory reset
1. Press MENU on the remote control then
select Install > Preferences > EasyLink.
2. Select On or Off.
Use one-touch play
One-touch play enables you to press the play
button on, for example, your DVD remote
control. This starts playback on your DVD
device and automatically switches your TV to
the correct source, displaying DVD content.
2. Press Æ to enter the list.
Use System standby
3. Press Î or ï to select the channel to
decode.
System standby enables you to press and hold
the POWER button on, for example, your
TV remote control. This switches your TV and
all connected HDMI devices on or to standby
mode. You can perform system standby using
remote controls from any of the connected
HDMI devices.
4. Press OK to select or unselect the channel.
5. Press Í to return to the previous menu.
6. Press MENU to exit.
EN-36
EN
7.6 Prepare TV for digital
services
Scrambled digital TV channels can be decoded
with a Conditional Access Module (CAM) and
a Smart card provided by a digital TV service
operator.
The CAM may enable several digital services,
depending on the operator and services
you choose (for example, pay TV). Contact
your digital TV service operator for more
information about services and terms.
Using the Conditional Access Module
BBWARNING
Switch off your TV before inserting
a CAM. Be sure to follow the
instructions described below. Wrong
insertion of a CAM may damage both
the CAM and your TV.
1. Following the directions printed on the
CAM, gently insert the CAM into the
Common Interface on the side of the TV.
2. Push the CAM in as far as it will go.
DDNote
Do not remove the CAM from the slot.
Removing the CAM will deactivate the
digital services.
Access CAM services
• After inserting and activating the CAM,
press MENU on the remote control and
select TV menu > Features > Common
interface.
This menu option is only available if the CAM
is correctly inserted and activated. On-screen
applications and content are provided by your
digital TV service operator.
3. Turn on the TV and wait for the CAM to
be activated. This may take several minutes.
EN-37
8
Technical
specifications
• PC IN: PC D-sub 15pins connector
• IR Link: Connector for an IR Link compliant
device. (e.q. set-top box).
Supported display resolutions
Connections (Side)
• Computer formats (PC)
Resolution
Refresh rate
720 x 400
70Hz
640 x 480
60Hz
640 x 460
67Hz
800 x 600
60Hz
1024 x 768
60Hz
1440 x 900
60Hz
1680 x 1050
(22” only)
60Hz
• Headphone out (stereo mini-jack)
• Video formats
Resolution
Refresh rate
480i
60Hz
480p
60Hz
576i
50Hz
576p
50Hz
720p
50Hz, 60Hz
1080i
50Hz, 60Hz
1080p(HDMI only)50Hz, 60Hz
Tuner / Reception / Transmission
• Antenna input: 75ohm coaxial (IEC75)
• TV system: DVD COFDM 2K/8K
• Video playback: NTSC, SECAM, PAL
• DVB Terrestrial (see listed countries on the
back of the TV)
Remote control
• Type: RC-6
• Batteries: 2 x AAA size (LR03 type)
Connections (Rear)
• EXT 1: (SCART) Audio L/R, CVBS in/out,
RGB
• EXT 3: Component (Y Pb Pr), Audio L/R in
• HDMI
• TV ANTENNA
• AUDIO IN: Mini-jack audio in for PC.
EN-38
• EXT 2: AUDIO L/R, CVBS in, USB
• HDMI side
• Common Interface (CAM slot)
Power
• Mains power: AC 100-240V (±10%)
• Power and standby power consumption:
See technical specifications at www.philips.
com
• Ambient temperature: 5°C - 35°C
Specifications are subject to change without
notice. For detailed specifications of this
product go to www.philips.com/support.
Troubleshooting
This section describes commonly-encountered
issues and accompanying solutions.
9.1 General TV issues
The TV does not switch on:
• Unplug the mains cord, wait for one
minute and plug in the mains again.
• Verify that the mains cord is properly
connected and that the mains are
powered.
The remote control is not working
properly:
• Verify that the remote control batteries
are correctly inserted according to the
+/- orientation.
• Replace the remote control batteries if
they are flat or weak.
• Clean the remote control and TV sensor
lens.
You forgot your code to unlock Auto
Lock
• Enter ‘0711’ as described in Section 5.7
Lock TV channels or connected devices (Auto
Lock).
The TV menu is in the wrong language
• See Section 6.1 Automatically install channels
for instructions on how to change the TV
menu to your preferred language.
When turning the TV on/off/to standby,
you hear a creaking sound from the TV
chassis:
• No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools and warms up. This does
not impact performance.
9.2 TV channel issues
Previously installed channels do not
appear in the channel list:
EN
9
• Verify that the correct list is selected.
• The channel may have been uninstalled to
the Rearrange menu. To access the menu,
press MENU on the remote control and
select Install > Channel installation >
Rearrange.
No digital channels were found during
the installation:
• Verify if the TV supports DVB-T in your
country. See the listed countries on the
back of the TV.
9.3 Picture issues
The power indicator is on, but there is no
picture:
• Verify if the antenna is connected properly.
• Verify if the correct device is selected.
There is sound but no picture:
• Verify that picture settings are correctly set.
See Section 5.3 Adjust picture settings.
You receive poor TV reception from an
antenna connection:
• Check that the antenna is properly
connected to the TV.
• Loud speakers, unearthed audio devices,
neon lights, high buildings or mountains can
influence the picture quality. Try to improve
the reception quality by changing the
antenna direction or moving devices away
from the TV.
• Verify if the correct TV system is selected
for your region. See Section 6.2 Manually
install channels.
• If reception on only one channel is poor,
try to fine tune this channel. See Section 6.2
Fine tune analogue channels.
EN-39
You receive poor picture quality from
connected devices:
• Check that the devices are connected
properly.
• Verify that picture settings are correctly
set. See Section 5.3 Adjust picture settings.
The TV did not save my settings:
• Verify that the TV is set to Home mode,
which offers you complete flexibility to
change settings. See Section 5.4 Change to
Shop or Home mode.
The picture does not fit the screen, it is
too big or too small:
• Try using a different picture format as
described in Section 5.3 Change picture
format.
The picture position on screen is not
correct:
• Picture signals from some devices do not
fit the screen correctly. Check the signal
output of the device.
9.4 Sound issues
There is picture but no sound from the
TV:
DDNote
If no audio signal is detected, the TV
automatically switches off audio output and
does not indicate malfunction.
• Check that all cables are properly
connected.
• Check that the volume is not set to 0.
• Check that the sound is not muted.
There is picture but sound quality is
poor:
• Check Sound settings as described in
Section 5.3 Adjust sound settings.
There is picture but sound comes from
one speaker only:
• Verify that Balance correctly set as
described in Section 5.3 Adjust sound settings.
EN-40
9.5 HDMI connection issues
You encounter problems with HDMI
devices
• HDCP support can delay the time taken for
a TV to display content from a device.
• If the TV does not recognise the device and
the screen displays no picture, try switching
from one device to another and back again
to restart.
• If you experience intermittent sound
disruptions, check the user manual of the
HDMI device to verify that output settings
are correct. Alternatively, try connecting the
audio signal from the HDMI device to the
TV via AUDIO IN at the back of the TV.
9.6 PC connection issues
The PC display on my TV is not stable or
is not synchronised:
• Check that a supported resolution and
refresh rate is selected on your PC.
See Section 8 Technical specifications for
supported resolutions and refresh rates.
9.7 Contact us
If you cannot resolve your problem, refer to the
FAQ for this TV at www.philips.com/support.
If the problem remains unresolved, contact the
Customer Support Centre in your country as
listed in this user manual.
BBWARNING
Do not attempt to repair the TV
yourself.This may cause severe injury,
irreparable damage to your TV or void
your warranty.
DDNote
Please have available your TV model and
serial number before contacting us. These
numbers are available on the back and side
of your TV, as well as on the packaging.
EN
10 PSB Mode Instructions Guide
Register your product and get support at
www.philips.com/welcome
EN 19HFL3340D/10
DFU-AUG2008
PHIlIps
EN-41
10.1 INTRODUCTION TO PBS
MODE
The Professional Business Solutions (PBS) mode
defines a specific TV or monitor mode (similar
to hotel mode).
10.2 REMOTE CONTROL
10.2.1PBS Set-Up Remote control
2573 (optional)
This mode limits the amount of TV controls (e.g.
like volume limitation), that a normal user (i.e.
hotel guest) can use.
The amount of access can be configured in the
setup menu by a super-user (e.g. hotel installer).
This manual describes how to setup a television
channels using Virgin Mode, configure other TV
settings and activate the PBS mode.
DDNote:
Setup mode should be selected for hotel
installer.
EN-42
8. Í, Æ, Î, ï
Navigate the menu.
9. SLEEP
Display the sleep timer menu and adjust the
sleep timer.
10. P +/Switches to the next or previous channel.
11. NUMBER KEYS
Selects a channel, page or setting.
12. ∏
Selects a picture format.
13. MHEG CANCEL
Cancels digital text or interactive services
(UK only).
14. [
Mutes or restores sound.
15. ” +/Increases or decreases volume.
16. MENU/EXIT
Toggles the menu on or off.
17. ALARM ON
Display the Alarm menu - not applicable for
this model.
18. TELETEXT
Toggles teletext on or off.
19.
Splits the current channel or source on the
left of the screen. Teletext appears on the
right.
1. On/Standby .
Switches the TV on from standby or back to
standby.
2. GUIDE
(DVB-T)
Toggles the Electronic Program Guide on or
off. Only active with digital channels.
3. SOURCE
Selects connected devices.
(DVB-T)
4. SUBTITLE Activates or deactivates subtitles.
5. COLOUR KEYS
Selects tasks or teletext pages.
6. ALARM OFF
Disable Alarm status - Not applicable for this
model.
7. OK
Accesses the All channels menu or activates
a setting.
EN-43
EN
10.2.2Guest Remote control
22AV1104/10
10.3 INITIAL SETUP
10.3.1Virgin mode – Out Of Box
Setting and Initial Setup
This TV set includes an installation feature that,
at initial set-up of the TV, guides you through the
installer menu to apply the proper installation
settings.
This feature, named Virgin Mode, active when
the TV set is unpacked and first powered on,
is normally used for installation/setting of first
TV set. To save time during a complete setup
for hospitality system with more televisions, the
settings of this first TV set can be duplicated to
other televisions using the cloning mechanism
(described in chapters 4.6 and 4.7).
Please select your language
Press OK or the green color key on your remote
control to confirm
DDBefore setting PBS Mode to ON, and not
using cloning as configuration mechanism,
the television must be configured.
DDNote
In case of cloning the TV settings, Virgin
mode can be skipped by pressing the “Menu”
button on the television twice.
Follow the Virgin Mode guiding to set all
channels/programs
Digital Channels start at Program Number 1,
Analogue Channels start at Program Number
900.
EN-44
DDNote
The channel list can be customized by
hotel installer through Rearrange channel
list feature as indicated below.
Also rearrange channels can be easily done
through using Rename Channels feature
by entering direct channel numbers and
channel name if needed.
After setup/installation is completed, subsequent
switching on the TV will not let this Virgin Mode
menu to pop up again.
For details refer to consumer TV User Guide.
Preferred customer picture, sound and feature
settings - these settings will be used whenever
the TV is switched on from mains or standby in
PBS Mode
This can be achieved by popping up consumer
TV setup menu as below and do Picture/sound
setup and channel installation etc accordingly:
Apart from manually adjusting picture settings,
you can use Smart settings to set your TV to a
predefined picture and sound setting.
For details refer to consumer TV User Guide.
The following menu appears.
EN
The installer should change the TV to Home
mode by select Install > Preferences > Location
10.4.1PBS MODE
To activate PBS Mode, select ON.
10.4 DISPLAY SETUP MENUS
The TV can display PBS Setup menu by pressing
RC2573 MENU key in SETUP mode or by
following Guest RC key sequence “319753 [”
key within 10 seconds if high security mode set
to Off.
10.4.2APPLICATION
The Application to select is Hotel/Hospital or
Business Monitor; this is based on the installer
requirement.
EN-45
When APPLICATION is Hotel/Hospital, the
limited Guest TV menu can be accessed by
guest as below:
Refer to consumer TV User Guide for the
description of each menu item.
When APPLICATION is BUSINESS MONITOR,
the normal consumer TV setup menu can be
accessed by using guest RC menu key with the
additional control features listed in the PBS
setup menu.
10.4.3SWITCH ON SETTINGS
• MAXIMUM VOLUME – refers to the
maximum volume which the guest could
adjust to.
• SWITCH ON CHANNEL – choice
of channel number (analog or digital)
or an external video source to go to
when the TV set is switched on from
mains power or standby. In case of LAST
STATUS setting, the set will switch to
the last channel or source before the
TV went to standby or mains power off.
This LAST STATUS setting takes priority
over the APPLICATION settings.
• POWER ON – Refers to power state
after mains power on. ON means the
set should turn On after mains power
on, while Standby means the set should
turn to standby. LAST STATUS means
that the set should switch to the last
power state before mains power off.
• DISPLAY MESSAGE – Enable the
display of the welcome message for 30
secs after switching on the set from
mains power or standby. However,
if OSD Display is OFF, the welcome
message display is always disabled,
regardless of the Display Message
Setting.
• WELCOME MESSAGE – Define
welcome message of 2 lines of 20
alphanumeric characters each. The
characters used depend on the language
selected for consumer operation.
• SWITCH ON VOLUME - The TV
will always switch on (via mains-switch
or standby) to this preset value. The
On volume setting cannot exceed the
max volume. The current volume should
follow the on volume, and adjusting on
volume should also affect the current
volume.
EN-46
The letters are entered and navigated through
cursor keys and digit keys.
• LOW POWER STANDBY - define
the power mode when TV set goes to
standby by pressing RC power key or
Local Keyboard power key - Green: TV
will enter low standby power mode to
achieve minimum power consumption;
Fast: TV will enter semi-standby mode to
achieve fast powering up,
10.4.5 BLANK CHANNEL
• TELEVISION BUTTONS LOCKED
– Selection of television buttons locked
or unlocked. ON means all television
buttons are locked, except the Power
button, OFF means all television buttons
are enabled, while ALL means all
television buttons are locked, including
the Power button.
• BLANK CHANNEL - choice of either
blank or not blanking the video for the current
channel. In PBS application, the blanked channel
is used for off-air radio transmission, e.g., remodulated FM radio, music CDs etc. The current
blank mode should follow the channel blanked
status and changing the channel blanked should
also blank or unblank the current channel.
• REMOTE CONTROL LOCKED –
Enable or disable the operation of the
normal remotes. However, when the
High Security Mode is OFF, to enter
PBS Mode Menu, using the “319753[”
key sequence is not blocked, even when
Remote Control Locked is ON.
• OSD DISPLAY – Enable or disable
OSD display (e.g., channel number or
name, sound mode, volume bar, clock,
etc.).
• HIGH SECURITY MODE – choice
between using normal consumer RC
or PBS setup RC to display the setup
menu. When enabled, only the setup RC
menu key can display the setup menu.
When disabled, both the setup RC menu
key and normal guest remote control
sequence “319753 [” can display the
setup menu.
DDNote
Channel Blank will apply for the current
channel, to navigate and blank other
channels, Blank channel submenu should be
selected by clicking on right cursor key as
below:
• AUTO SCART – Enable (ON) or
disable (OFF) autoscart switching or
break-in in PBS mode.
EN-47
EN
10.4.4CONTROL SETTINGS
10.4.6SMARTLOADER TO TV
(using USB)
Copy TV configuration data (Video, Audio,
Channel Table, PBS Mode settings) from USB
Memory stick to TV. Upon copying progress
completion, an indication message will feedback
to PBS-user (“Settings copied to TV”).
DDNote
During copying process, the USB memory
stick should not be removed to prevent any
undersigned functionality of the TV.
DDNote
During this process, the cloning files NVM_
MTK_2K8_EU.BIN and CH_MTK_2K8_
EU.BIN are retrieved by TV and update the
TV NVM and Channel setup accordingly.
DDNote
All RC command and local keyboard will be
disabled during copying process
DDNote
It is recommended to do a television switch
off/switch on after the cloning is done.
EN-48
10.4.7 TV TO SMARTLOADER
(using USB)
Copy TV configuration data ( Video, Audio,
Channel Table, PBS Mode settings[i.e.Welcome
Message, …]) from TV to USB drive.
• Upon copying progress completion, an
indication will given as feedback to PBS-user
(“Settings copied to USB”)
A 128MB USB Memory Stick with at least
10MB free memory space will be suitable.
DDNote
During copying process, USB drive should
not be removed to prevent any undersigned
functionality of the TV.
DDNote
After completed, there are 2 files generated
i n t h e U S B ro o t d i re c t o r y - N V M _
MTK_2K8_EU.BIN containing the general
setting for example, Video/Audio, etc. and
CH_MTK_2K8_EU.BIN containing the
channel installation setting for example
channel list, etc.
DDNote
All RC command and local keyboard will be
disabled during copying process
DDNote
Normally, the first TV is manually configured/
setup by the hotel installer, then all the
data are transferred/ cloned to USB drive
through TV to Smart Loader, subsequently,
others TVs can be updated by using same
USB drive. This cloning feature prevent multi
manually setup on all the TV sets, hence,
speed up the hotel installation process.
EN
10.4.8 Select remote control
setting
1. Enter Setup menu.
2. Press ▼ to select Remote control.
3. Press ► to enter Auto scart.
4. Press ▲or ▼ to select the desired option.
• Off
Switch off this feature.
3. Press ► to enter control setting.
• On
4. Press▼or ▲ to select a setting.
Switch on this feature.
5. Press ► to enter.
• Power SCART
High security mode
• On
Access the BDS Hotel Mod_e Setup Menu via
the setup remote control only .
•Off
Access the BDS Hotel Mode Setup Menu
via the setup remote control or guest mode
remote control.
Set auto scart
Select to switch the TV on from standby
mode when a scart signal is detected or when
no scart signal is detected the TV will go to
standby mode.
5.Press ▼ to select Store - go right and_
press ► to save setting.
• Muti RC
• Multi remote control
• Off
Disable multi remote control function.
Set the TV to switch to the source where
scart signal is detected.
•Blue
1.Enter Setup menu.
Select to use the blue guest remote control.
2.Press ▼ to select Auto scart.
•Red
Select to use the red guest remote control.
•Green
Select to use the green guest remote control.
• Yellow
Select to use the yellow guest remote control.
EN-49
10.4.9 Smart RC
10.6 HOW TO POSITION YOUR
TV
VIEWING ANGLE is the most convenient
angle at which a display can be viewed with
good visual performance
• On
Select to use the smart remote control.
• Off
Disable the use the smart remote control.
Add current channel to Pay TV ring
Select R0, R1 or R2 setting for the various pay
TV channels.
10.5 STORE
Activation of this item will store PBS mode
settings. The PBS mode setting will take effect
after putting the set to standby.
DDImportant:
Cloning system and configuration setttings,
using USB or SerialXpress, is only supported
in case of using equal televisions.
EN-50
How a TV and panel are designed:
What to do if viewing angle is not good enough:
••
Add tilt (vertical) or swivel (horizontal) to
the TV, in order to position the TV in the
most optimal situation.
If the TV is placed above a certain height,
it’s advised to always tilt the TV.
EN
••
Philips has wall mounts with tilt for hotel TVs as
optional accessories.
Philips is recommending to position the TV
as mentioned above. Positioning the TV
differently might have impact on the viewing
angle. Philips is not responsible for reduced
viewing experience due to wrong viewing
angle if the TV is positioned differently then
recommended.
EN-51
11 Index
I
A
K
Analogue
Channel installation 25
Antenna
Connect 9
Install channels 24
Kensington lock 7
L
Language
Audio language 19
Automatic
Audio 19
Menus 24
Subtitles 23
Channel installation 24
B
M
Back connectors 5
Brightness 17
Mains
C
Care
Connect 9
Manual channel installation 25
Menus
Auto lock 22
Language 24
Environment 4
Channels
Rename 26
Test digital reception 27
Uninstall 26
Contrast 17
Country
Selection 25
D
Mono sound 19
N
Noise reduction 17
P
Parental rating 23
Picture
Adjust settings
Brightness 17
Colour 17
Contrast 17
Noise reduction 17
Sharpness 17
Devices
Watch 12
Digital
Radio 24
Services 35
Dual I/II 19
E
Environmental care 4
H
HDCP 28, 29
Hearing impaired 25
Home mode 19
Position TV 7
Power
Connect 9
R
Radio channels 24
Remote control
Basic use 6
Batteries 10
Rename channels 26
EN-52
Timers
Screen care 4
Settings
Picture
Adjust settings 16
Use smart settings 17
Sound
Adjust settings 19
TV location
Change location 19
Sleeptimer 22
Troubleshooting 37
TV
Auto lock 22
Cable management 10
Channels
Favorite lists 20
Connect
Antenna 9
Mains 9
Connections
Devices 31
Quality 29
Get started 7
Main menus
Use 15
Overview 5
Position 7
Remote control
Basic use 6
Batteries 10
Software update 24
Stand 7
Subtitles 23
Switch
On 10
Timers
Sleeptimer 22
Wall mount 7
Watch
Devices 12
Setup devices 34
Sharpness 17
Shop mode 19
Side
Connectors 5
Smart settings
Current 17
Movie 17
Standard 17
Vivid 17
Software update
Check version 24
Sound
Adjust settings
Audio language 19
Dual I/II 19
Mono/Stereo 19
Surround mode 19
Stereo sound 19
Subtitles
Language 23
Surround sound
Mode 19
Switch TV
On 10
U
Uninstall channels 26
System selection 25
V
T
VESA-compatible wall bracket 7
Video formats 37
Technical specifications 37
Teletext
Advanced use
Teletext 2.5 20
EN
S
W
Wall mount TV 7
EN-53
EN-54
EN
EN-55