Mitsubishi CP9600DW-S Instruction manual

DIGITAL COLOR PRINTER
MODEL
CP9600DW-S
OPERATION MANUAL
POWER
DOOR OPEN
ALARM
PAPER/INK RIBBON
DATA
READY
CANCEL
COOLING
FEED&CUT
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOR PRINTER.
Hereby, Mitsubishi Electric Corporation, declares that this digital color printer is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/
EC.
This digital color printer complies with the requirements of the EC Directive 89/336/EEC,
73/23/EEC, 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper operation
in residential areas, on business and light industrial premises and on small-scale
enterprises, inside as well as outside of the buildings. All places of operation are
characterised by their connection to the public low voltage power supply system.
INFORMATION
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
Use the included AC power cord so as not to interfere with radio and television reception.
If you use other cables, it may cause interference with radio and television reception.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute the risk of
electric shock.
OTHERS
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
TROUBLESHOOTING
PERSONNEL.
CONNECTIONS PREPARATION
CAUTION
FEATURES
WARNING:
PRECAUTIONS
WARNING :
The “Caution, hot surface” symbol indicates that the marked item may be hot and
should not be touched.
The “ON/OFF” symbol indicates connection to or disconnection from the mains,
at least for mains switches.
The “Alternating current” symbol indicates that the equipment is suitable for
alternating current only.
CONTENTS
The “Electro Static Discharge (ESD) warning” symbol indicates that trouble
(including equipment malfunction) due to static electricity may occur in certain
conditions.
CAUTION:
NOTE:
WARNING:
WARNING:
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please, dispose of this equipment at your local community waste collection/recycling centre.
In the European Union there are separate collection systems for used electrical and electronic product.
Please, help us to conserve the environment we live in!
WARNING:
The socket outlet shall be installed near the equipment and shall be easily accessible.
CONTENTS
Note: This symbol mark is for EU countries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV.
OTHERS
In Europe, use the AC power cord according to the recommendations as below, in
order to comply with EN60950-1.
Connect to the 230V receptacle of the room or the host equipment.
The AC power cord should be VDE approved and consist of core size 1mm2 or
bigger, length 2.5m or shorter cord with IEC60320-1/C13 type, 250V 10A or higher
rating connector and CEE(7)VII type, 250V 10A or higher rating plug.
Use the AC power cord as specified above, so as not to interfere with radio and
television reception.
If you use other cables, it may cause interference with radio and television reception.
TROUBLESHOOTING
In the USA or Canada, use the AC power cord according to the recommendations as
below, in order to comply with UL60950-1 and CAN/CSA C22.2 No. 60950-1-03.
Connect to the 120V receptacle of the room or the host equipment.
The AC power cord should be UL or CSA approved and consist of type SJT or SVT,
size 16 or 18AWG, length 2.5m or shorter cord with IEC60320-1/C13 type, 125V 10A
or higher rating connector and NEMA 5-15 type, 125V 10A or higher rating plug.
Use the AC power cord as specified above, so as not to interfere with radio and
television reception.
If you use other cables, it may cause interference with radio and television reception.
CONNECTIONS PREPARATION
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
FEATURES
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his or her own
expense.
PRECAUTIONS
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
CONTENTS
PRECAUTIONS
CONTENTS
1
2-4
5
6
7-8
FEATURES
Contents ................................................................................................
Safety precautions ................................................................................
Special features ....................................................................................
Unpacking .............................................................................................
Features and functions ..........................................................................
Front panel ............................................................................................. 7
Side and rear panel ................................................................................ 8
Connections .......................................................................................... 9-10
Connection with USB data signal equipment ......................................... 9
Setting of DIP switches .......................................................................... 10
CONNECTIONS PREPARATION
Before operation .................................................................................... 11-15
Installation of print paper ........................................................................ 11-12
Installation of ink ribbon ......................................................................... 13-14
Handling of paper / ink ribbon set .......................................................... 15
Error messages and countermeasures ................................................. 16-18
Indications on the front panel and countermeasures ............................. 16
Overcoming paper jams ......................................................................... 17
Before calling for service ........................................................................ 18
Instructions for transportation ................................................................ 18
Cleaning ................................................................................................ 19
Specifications ........................................................................................ 20
TROUBLESHOOTING
OTHERS
CONTENTS
1
SAFETY PRECAUTIONS
In the interest of safety, please observe the following precautions:
This Digital Color Printer is designed to operate on 120V AC 50/60 Hz in the U.S.A. and Canada, and 220V-240V AC 50/60Hz in
Europe. Never connect to any outlet or power supply having a different voltage or frequency.
WARNING : THIS APPARATUS MUST BE EARTHED.
AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE.
FEATURES
PROTECTIVE MEASURES
PRECAUTIONS
POWER REQUIREMENT
IF ABNORMALITIES ARISE, .....
Use of the unit during emission of smoke or abnormal sounds (without adopting countermeasures) is dangerous. In such a
case, unplug the power cord from the source outlet immediately, and request maintenance service from the sales dealer.
CONNECTIONS PREPARATION
NEVER INSERT ANY OBJECT INTO THE UNIT
Foreign objects of any kind inserted into this unit constitute a safety hazard and can cause extensive damage.
DO NOT PLACE ANYTHING ON THE DIGITAL COLOR PRINTER
Heavy objects placed on the Digital Color Printer can cause damage or obstruct proper ventilation.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard. When unplugging, hold by the plug only and remove carefully.
DO NOT PLACE WATER CONTAINERS ON THE UNIT
Do not place flower vases, and other water-holding containers on the device. If, for some reason, water seeps to the inside of
the unit, unplug the power cord from the source outlet, and contact the sales dealer. If used without corrective measures, the
unit may be damaged.
“In the interest of safety, avoid handling of liquids near the unit.”
TROUBLESHOOTING
DO NOT REMOVE THE CABINET
Touching internal parts is dangerous, besides, it may lead to malfunction. Contact the sales dealer to carry out internal checks
and adjustments. Before opening the cover for eliminating a jammed paper, etc., be sure to disconnect the power cord plug.
UNPLUG THE POWER CORD DURING A LONG ABSENCE
Turn off the main power switch and unplug the power cord during a long absence.
OTHERS
WHEN TRANSPORTING THE UNIT
When transporting the unit, remove the ink ribbon and print paper from the unit. See “INSTRUCTIONS FOR
TRANSPORTATION” on page 18.
BE CAREFUL AROUND PRINT PAPER EXIT SLOT
Don’t insert your hand or any material into the paper exit slot during printing.
Do not touch the cutter blade inside the paper exit slot.
Otherwise, your finger will be injured.
Do not touch the thermal head and the metal part on the motor cover (located inside the unit).
They are heated to high temperature and may cause burns or injury when touched.
WHEN PLACING THE PRINT PAPER, REMOVE ONE FLANGE AND KEEP THE PRINT PAPER UPRIGHT ON ITS
SIDE WITH NO FLANGE
When you put the print paper sideways on a table, etc., it may roll and fall. This may cause injury.
CONNECTION CABLES
Use the provided power cord.
2
CONTENTS
DO NOT TOUCH THE THERMAL HEAD AND METAL PART ON THE MOTOR COVER
SAFETY PRECAUTIONS
REMOVE THE PAPER STRIP BIN WHEN OPENING OR CLOSING THE DOOR
PRECAUTIONS
When you open or close the door with the paper strip bin installed, the bin may be removed and fall. This may cause injury or
damge.
INSTALLATION LOCATIONS
MAINTAIN GOOD VENTILATION
FEATURES
Ventilation slots and holes are provided on the rear and both sides of this unit. Place the unit on a hard and level surface and
keep a space between the unit and the walls to ensure proper ventilation. When putting the unit on the system rack, take a
space between the unit and the back and sides of the rack.
UNSUITABLE LOCATIONS
Avoid shaky places or hot-springs areas where hydrogen sulfide and acidic ions are likely to be generated.
PLACES WITH HIGH HUMIDITY AND DUST
PLACES LIKELY TO BE EXTREMELY HOT
Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures, which may deform the
cabinet, or can become a prime cause of damage.
PLACES THE UNIT ON A HORIZONTAL LEVEL
The unit is likely to be affected if it is placed in slanted conditions or in an unstable places.
PROTECT AGAINST DEW FORMATION
In extremely cold regions, if the unit is moved quickly from an extremely cold place to warmer one, dew is likely to be formed. If
dew is formed, printing is not possible.
OPERATING AMBIENT TEMPERATURE RANGE
TROUBLESHOOTING
The operating ambient temperature range is 5°C-40°C (41°F-104°F) and the humidity of 30%-80% RH. When using the unit on
the system rack, be sure to keep this ambient temperature inside the rack.
When the printer is used in a low temperature, it may take some time to start printing.
CONNECTIONS PREPARATION
Do not place the unit at a high humidity and dusty locations. They can cause extensive damage to this unit. Avoid places where
the unit is likely to be exposed to oily fumes and vapors.
FOR LONG OPERATING LIFE
UNSUITABLE MATERIALS FOR THE DIGITAL COLOR PRINTER
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry completely before
operating. Never use petroleum base solutions or abrasive cleaners.
OTHERS
Coat flaking and deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or any other solvent, if
rubber or PVC items are left in contact with the unit for extended duration, or if the unit is sprayed with insecticide.
HEAD ABRASION
CONNECTING DEVICES
Read thoroughly “Operating Precautions” of the instruction booklets for the devices connected with the Digital Color Printer. The
power cord must be disconnected after printing is over.
CAUTION ON RELOCATING
When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause for damage.
Further, make sure to disconnect the power cord from the power outlet, and the cables from the connected devices.
3
CONTENTS
The thermal head, like the video head, wears out. When it is abraded, it becomes hard to print out fine details of the picture. In
such a case, it is necessary to replace the thermal head. Consult with the sales dealer for replacing the head.
SAFETY PRECAUTIONS
PRECAUTIONS
OTHER CAUTIONS
Do not pull out nor touch the print paper until printing is completed. It may degrade the print quality or cause an error.
•
Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to
extremely low or high temperatures could cause loss of color, uneven color or lines, or wrinkles in the print images.
•
During printing on 15x23 (6x9”) size paper, the printer may stop printing temporarily for cooling down. (The COOLING
indicator blinks.) Please wait for the printer to resume printing after its completion of cooling.
Do not touch the print paper.
•
During printing, the printer may stop printing for about 90 seconds for cooling down. (The COOLING indicator blinks.) Please
wait for the printer to resume printing after its completion of cooling.
•
Each time printing on 15x23 (6x9”)-size paper is completed, remove the prints. If the prints are not removed, a paper jam
may occur.
FEATURES
•
CONNECTIONS PREPARATION
NOTE:
YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE SUDDEN
OCCURRENCE OF A MALFUNCTION.
TROUBLESHOOTING
OTHERS
CONTENTS
4
SPECIAL FEATURES
PRECAUTIONS
SPECIAL FEATURES
2 PRINT SIZES ARE AVAILABLE DEPENDING ON THE PURPOSE
2 printing sizes, 10x15 (4x6”) (max.102 x 152 mm) and 15x23 (6x9”) (max.152 x 229 mm), are selectable.
600 DPI HIGH RESOLUTION
CP9600DW-S has a high resolution of 600 DPI for precise illustrations and sharp photographic images.
FEATURES
LARGE CAPACITY PRINTING
Maximum of 600 prints per roll for 10x15 (4x6”) is offered. Large economical print capacity per roll reduces frequency of
exchanging paper and ink ribbon.
HIGH QUALITY PRINTING
CONNECTIONS PREPARATION
CP9600DW-S is a dye sublimation thermal transfer color printer, which produces superior high quality images. It also produces
a continuous tone at 256 gradient for each of Y, M, and C and 16.7 million colors.
HIGH SPEED PRINTING
Normal printing speed is approx. 23 seconds (in 10x15 (4x6”) 300 DPI mode print). Use of roll paper shortens the time for
installing and removing.
HIGH SPEED USB INTERFACE
Input and output of control signals using the Hi-Speed USB (Ver. 2.0) interface.
TROUBLESHOOTING
OTHERS
CONTENTS
5
UNPACKING
UNPACKING
PRECAUTIONS
Take the printer out of the box by the following procedures. Make sure to check the accessories.
1 Open the top of the box.
FEATURES
2 Remove the accessories together with upper cushions.
CONNECTIONS PREPARATION
3 Hold the handles of the cardboard and pull it up carefully to take
the printer together with the lower cushions out of the box.
Make sure to pull the cardboard straight up.
NOTE
This printer is about 17 kg in weight. Handle it with care.
4 Separate the printer from the cushions.
Hold the parts indicated by the arrows and pull the printer straight up.
TROUBLESHOOTING
5 Unwrap the packing.
OTHERS
Keep the cushions for transporting the printer again.
When moving this printer, hold the lower front part and the handle on the rear side.
Handle
2 CONTENTS
The accessories are contained in the upper cushions. Check the contents.
Quick setup guide
Power cords
Paper strip
bin
CD-ROM
Print outlet
cover
Paper flanges
Sheet for
paper guide
CONTENTS
Paper
catcher
Label for
installation
Ink cassette
The ink cassette is contained in
the printer.
6
FEATURES & FUNCTIONS
6
9
8
7
10
PRECAUTIONS
FRONT PANEL
11
PAPER STRIP BIN
Hook the paper strip bin by its latches.
4
POWER
ALARM
PAPER/INK RIBBON
DATA
DOOR OPEN
READY
CANCEL
COOLING
12
FEED&CUT
A
FEATURES
5
B
13
3
2
1
2
To attach: A -> B
To remove: B -> A
1 POWER BUTTON
Use to switch the power ON and OFF.
Press to turn on power. Press again to turn off power.
2 PAPER STRIP BIN
9DATA INDICATOR
This indicator blinks during data transfer. It illuminates
during printing.
A READY INDICATOR
This indicator illuminates when this unit is ready to accept
the data. It also illuminates during data transfer. It blinks
frequently.
during print canceling procedure.
NOTE
Remove the bin before opening the door. If the door is
opened with this bin attached, the printer or this bin may
B COOLING INDICATOR
be damaged.
C CANCEL BUTTON
3 PRINT OUTLET
4 DOOR OPEN BUTTON
When you press this button while the power is on, the door
will open in about five seconds.
5 DOOR
6 POWER INDICATOR
When the power is turned on, the indicator illuminates.
7ALARM INDICATOR
This indicator illuminates or blinks when a paper jam occurs
or the door is open. See page 16.
8PAPER/INK RIBBON INDICATOR
When an error concerning the ink ribbon or print paper
continuous printing. After the ongoing printing at the time
this button is pressed is completed, the printing process is
canceled.
D FEED & CUT BUTTON
When you keep pressing this button for more than 1
second, the print paper is fed and cut.
E PAPER CATCHER
You may stack about 10 prints on this paper catcher. See
the next page for the installation of this paper catcher. When
using the print paper of 15x23(6x9”), do not install the paper
catcher.
NOTE
It is recommended to remove the prints stacked on the
paper catcher frequently. If the prints are not removed
frequently, a paper jam may cause.
occurs, this indicator illuminates or blinks. See page 16.
7
CONTENTS
Open this door when installing print paper or ink ribbon.
Press the DOOR OPEN button 4 to open the door.
Press this button for more than 1 second to cancel
OTHERS
The printed paper comes out here.
When the unit is overheated, this indicator blinks. See
page 16.
TROUBLESHOOTING
Holds the paper chips generated by margin cut. To prevent
jamming the chips at the print outlet, throw away the chips
CONNECTIONS PREPARATION
14
FEATURES & FUNCTIONS
PRECAUTIONS
SIDE AND REAR PANEL
1
FEATURES
2
CONNECTIONS PREPARATION
3
3
AC LINE
4
(LEFT SIDE)
(REAR)
1 USB TERMINAL
3 HANDLE FOR TRANSPORTING
When transporting this unit, hold this handle and the lower
See page 9.
front part of this unit.
2 DIP SWITCHES
4 POWER SOCKET (AC LINE)
Use to set various functions of this unit. See page 10.
Use to connect the provided power cord. Insert the cord
firmly.
TROUBLESHOOTING
Use to connect the USB cable.
OTHERS
INSTALLING THE PAPER CATCHER
A.
B.
CONTENTS
Hook the paper catcher by its latches. When using the print paper of 15x23(6x9”), do not install the paper catcher.
C.
Holes for 10 x 15 size paper
(Paper width : 152 mm)
8
CONNECTIONS
PRECAUTIONS
CONNECTION WITH USB DATA SIGNAL EQUIPMENT
2 CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
Connect this unit to a personal computer as shown below.
FEATURES
To USB port
CONNECTIONS PREPARATION
To USB port
Personal computer
Digital color printer
TROUBLESHOOTING
OTHERS
CONTENTS
9
CONNECTIONS
2 SETTING DIP SWITCHES
OFF
ON
FEATURES
12345678
All the switches are set to OFF at the time of shipment from the factory.
Turn off the power before changing the DIP switch settings.
PRECAUTIONS
SETTING OF DIP SWITCHES
CONNECTIONS PREPARATION
Switch No. Setting Function
1
OFF
Auto feed & cut mode
When the door is closed after the print paper is installed with this unit powered on, this unit
automatically carries out paper feed & cut operation.
ON
Manual feed & cut mode
2
OFF
Set this switch to OFF.
ON
3
OFF
Set this switch to OFF.
ON
4
OFF
Set this switch to OFF.
ON
5
OFF
Set this switch to ON.
ON
6
OFF
Set this switch to OFF.
ON
7
OFF
Set this switch to OFF.
ON
8
OFF
Set this switch to OFF.
ON
TROUBLESHOOTING
OTHERS
CONTENTS
10
BEFORE OPERATION
Before printing,
PRECAUTIONS
1 Install the print paper to this unit. (See below.)
2 Install the ink ribbon to this unit. (page 13-14)
INSTALLATION OF PRINT PAPER
FEATURES
1 Attach the supplied paper flanges to both sides of the print paper.
When you pinch the latches on the paper flange, the stoppers retract into the shaft.
Attach the flanges to the print paper with the stoppers retracted.
•
•
NOTE
Take care not to pinch your fingers.
Do not remove the sticker on the print paper yet.
•
Do not slacken the paper. Any slack in the print paper may degrade the print quality.
CONNECTIONS PREPARATION
Make sure that the flanges are attached to the print paper securely, and release the
latches.
Sticker
•
CAUTION
When placing the print paper, remove one flange and keep the print paper upright
•
on its side with no flange.
When you put the print paper sideways, it may roll and fall. This may cause injury.
INCORRECT
CORRECT
NOTE
TROUBLESHOOTING
Do not touch the thermal head.
Fingerprints or dust on the thermal head will degrade the print quality.
OTHERS
CONTENTS
11
BEFORE OPERATION
2 Press the POWER button to turn on the power.
PRECAUTIONS
3 Press the DOOR OPEN button to open the door.
FEATURES
Take the ink cassette in the printer out.
CONNECTIONS PREPARATION
4 Install the print paper into the unit.
Make sure to install the print paper firmly.
NOTE
Install the print paper into the unit slowly. If it is dropped along the ditches, the unit or
accessories may be damaged.
TROUBLESHOOTING
5 Remove the sticker, insert the print paper between the rollers as
shown right, and feed the print paper until it reaches the black
cover.
•
•
NOTE
When taking the print paper out, pull it up toward you.
•
•
Make sure to turn on the power before replacing the print paper.
Make sure to eliminate any slack from the print paper. If you carry out the following
Print paper
Roller
CONTENTS
•
Remove the sticker before inserting the print paper between rollers. Make sure to
insert the paper straight.
NOTE
Keep the roller clean. Dirt on the roller may degrade the print quality.
OTHERS
Direction of paper
insertion
steps without eliminating the slack, the print paper may be damaged.
Black cover
12
BEFORE OPERATION
PRECAUTIONS
INSTALLATION OF INK RIBBON
2 INSTALLING THE INK RIBBON
After installing the print paper, install the ink cassette into this unit.
Before installing the ink cassette into this unit, load the ink ribbon in the ink cassette.
NOTE
Place the ink cassette on a flat surface, when loading the ink ribbon.
Select a place that is free of dust when loading the ink ribbon. Dust or dirt settling on
•
the ink ribbon results in poor print quality.
Make sure that the shafts of the ink ribbon fit into the ink cassette firmly.
FEATURES
•
•
•
CONNECTIONS PREPARATION
1 Load the ink ribbon in the ink cassette as shown below.
Make sure to load it in the correct position.
2
1
1
1
2
2
4
3
4
Ink ribbon
3
Handle
Gear (ivory)
Ditch
4
3
Ink cassette
2 INSTALLING THE INK CASSETTE
TROUBLESHOOTING
1 Place the ink cassette containing the ink ribbon in the position as
shown right.
Place the ink cassette on the print paper with the shaft (thicker one) around which the
ink ribbon is wound located to the front. Align the arrows marked on the sides of ink
cassette with those on the unit.
Place the rear of the ink cassette along the guides that are provided inside the unit.
OTHERS
Make sure to set the ink ribbon roller to the ditches firmly.
Turn the ivory roller to eliminate any slack.
CONTENTS
Arrows
Guides
13
BEFORE OPERATION
2 Push the ink cassette toward the back of the unit.
PRECAUTIONS
Hold the handle of the ink cassette and push it straight toward the back of the unit.
Then raise it until you hear a click to secure it in the ink cassette holder.
NOTE
If the ink ribbon is used up, repeat the steps 1 to 2 to replace the print paper and the
ink ribbon.
FEATURES
CONNECTIONS PREPARATION
3 Push the center of the door to close.
The print paper setting is initialized two minutes after you close the door.
When the auto feed & cut mode has been selected, the FEED & CUT procedure is
repeated three times after you close the door. When the print paper with the post card
printing on its reverse side is installed, the FEED & CUT procedure is repeated five
times.
NOTE
When closing the door, push it until a click is heard.
If the PAPER/INK RIBBON indicator illuminates when the door is closed, the print
TROUBLESHOOTING
•
•
paper may have not been installed correctly.
In this case, open the door to make sure that the print paper has been installed
•
correctly. Then close the door again.
On the auto feed & cut mode, when the print paper is installed more than three
times, the print paper may be used up earlier than the ink ribbon.
CANCEL
OTHERS
2 When the manual & cut mode has been selected
FEED&CUT
When the manual feed & cut mode has been selected, hold down the FEED & CUT
button for 1 second or longer. Repeat the manual feed & cut three times. When the
print paper with the post card printing on its reverse side is installed, repeat this procedure
five times.
CONTENTS
For how to select the auto feed & cut mode, see “Setting of DIP switches” (on page 10).
Installation of the print paper and the ink ribbon is completed.
•
•
NOTE
Make sure to replace the print paper and the ink ribbon at the same time.
When replacing them, throw away the paper chips in the paper strip bin.
14
BEFORE OPERATION
PRECAUTIONS
HANDLING OF PAPER / INK RIBBON SET
2 BEFORE PRINTING
•
Fingerprints or dust on the paper’s printing surface may degrade the print quality and
cause paper jams. When the manual feed & cut mode has been selected, repeat the
FEATURES
FEED & CUT procedure three times after replacing the print paper. When the print paper
with the post card printing on its reverse side is installed, repeat five times. If you omit
cutting the print paper by the FEED & CUT procedure, first two or three prints may not be
printed partly because of finger oil or dirt.
•
the print paper in the room to stabilize its temperature before using it.
If you repeat the FEED & CUT procedure more than the designated number of times while
CONNECTIONS PREPARATION
•
When the print paper is abruptly transferred from a cool place to a hot place, vapor or dew
is generated on the paper’s surface causing paper jams or degraded print quality. Leave
installing the print paper, the indicated number of prints may not be made. In addition, if
you replace the print paper before it is used up, the indicated number of prints may not be
made.
2 AFTER PRINTING
•
If the paper absorbs nonvolatile organic solvents (alcohol, ester, ketone, etc.) the print may
•
be discolored.
Discoloration of prints is accelerated if the print paper comes into contact with soft vinyl
•
chloride such as transparent tape.
Avoid storing prints in direct sunlight or places with high humidity.
TROUBLESHOOTING
2 STORAGE OF PAPER / INK RIBBON SET
•
Do not store the print paper and ink ribbon in the container made of soft polyvinyl chloride.
They may be discolored because of chemical reaction.
•
Store the print paper and ink ribbon out of direct sunlight and away from heating appliances
in a cool, dark place where the temperature is 5˚C to 30˚C and the humidity is 20% to 60%
OTHERS
RH.
CONTENTS
15
ERROR MESSAGES & COUNTERMEASURES
2 If, for some reason, printing is not possible or an error occurs during printing, the indicators on the front panel will
illuminate or blink. In this case, follow the procedure described below.
In case of an error during printing, unless you turn off the unit, the unit resumes printing automatically when the error is
corrected.
: Steadyon
PAPER/
INK RIBBON
DATA
READY COOLING
: Blinking
: Depends on the previous condition
Causes and Countermeasures
Page
7
17
The power is turned off during printing process.
• Turn on the power and carry out the paper feed & cut.
---
The temperature of the thermal head is too high.
• Wait until the indication goes off. * Note
7
The ink ribbon is not loaded.
The ink ribbon is used up.
The ink ribbon which is not available to this printer is
installed.
• Replace the ink ribbon with a new one.
11-12
13-14
OTHERS
Other errors
13-14
TROUBLESHOOTING
The print paper is not installed.
The print paper is used up.
• Install new print paper.
The combination of the ink ribbon and the print paper is
incorrect.
• Use a correct combination of the ink ribbon and the
print paper.
CONNECTIONS PREPARATION
The door is open.
• Close the door.
A paper jam occurs.
• Refer to “Overcoming paper jams.”
FEATURES
ALARM
: off
PRECAUTIONS
INDICATIONS ON THE FRONT PANEL AND COUNTERMEASURES
18
When ALARM or PAPER/INK RIBBON indicator illuminates or blinks, open the door and carry out the above
countermeasures.
If the indicator is not turned off by closing the door, carry out the paper feed & cut.
If an error occurs while the continuous printing through the PC is ongoing, it is resumed after the COOLING indicator
goes off.
16
CONTENTS
*Note
ERROR MESSAGES & COUNTERMEASURES
PRECAUTIONS
OVERCOMING PAPER JAMS
1 Press the DOOR OPEN button to open the door.
Make sure that the power is turned on before opening the door.
If the door does not open, turn off the power and turn it on again.
Then press the DOOR OPEN button again.
FEATURES
2 Remove the ink cassette.
Push down the ink cassette as shown by the arrow 1 and pull it out.
CONNECTIONS PREPARATION
2
1
3 Take out the print paper.
When taking the print paper out, pull it up toward you.
TROUBLESHOOTING
4 Cut off the defective part of the print paper with scissors.
NOTE
Make sure to cut off the printed part of the print paper. Failure to do this may result in the
ink ribbon sticking to the print paper and being torn.
OTHERS
5 Install the print paper and the ink cassette with the ink ribbon. (Refer
to pages 11-14.)
6 Push the center of the door to close.
The print paper setting is initialized two minutes after you close the door.
CONTENTS
When the auto feed & cut mode has been selected, the FEED & CUT procedure is
repeated three times after you close the door. When the print paper with the post card
printing on its reverse side is installed, the FEED & CUT procedure is repeated five
times.
DOOR OPEN
CANCEL
FEED&CUT
2 When the manual & cut mode has been selected
When the manual feed & cut mode has been selected, hold down the FEED & CUT
button for 1 second or longer. Repeat the manual feed & cut three times. When the
print paper with the post card printing on its reverse side is installed, repeat this procedure
five times.
For how to select the auto feed & cut mode, see “Setting of DIP switches” (on page 10).
17
ERROR MESSAGES & COUNTERMEASURES
PRECAUTIONS
BEFORE CALLING FOR SERVICE
For the following symptoms, check the unit again before calling for service.
Symptom
Check & Remedy
The power is not turned on.
Is the power cord plug disconnected from the outlet?
FEATURES
→ Connect the power cord plug to the outlet firmly.
→ The protective circuit may be working. Turn off the power and wait for
about two minutes. Then turn on the power again.
Are you turning off the power during printing procedure?
→ Turn on the power and then close the door.
The image is not printed.
Is the image data sent to this unit?
CONNECTIONS PREPARATION
The door doesn't close.
→ Make sure that the image data is sent to this unit.
Is the print paper or the ink ribbon used up?
→ Check them.
Is the ink cassette installed correctly?
→ Install the ink cassette correctly.
INSTRUCTIONS FOR TRANSPORTATION
When transporting this unit for some reason such as repair, follow the instructions below.
The genuine package unit may not endure more than one round trip. If the unit is transported with the package unit more than
one round trip, it may not be guaranteed.
Purchase another package unit when transporting this unit again.
Pack the unit with all the accessories (ink ribbon, print paper, ink cassette, and paper flanges) removed.
TROUBLESHOOTING
1. Use the original packaging
2. Turn off the power after the PAPER/INK RIBBON indicator blinks.
3. If the ink ribbon, print paper, or ink cassette can not be taken out, consult with your dealer.
OTHERS
After removing all the accessories, close the door with the printer’s power on. After the PAPER/INK RIBBON indicator blinks,
turn the power off.
CONTENTS
18
CLEANING
Cleaning as indicated below will help maintain stable printer operation and extend the printer’s life.
A small amount of alcohol
PRECAUTIONS
Preparations
Alcohol (isopropyl alcohol)
Tissue paper (Fold in half about four times, and use the folded side to clean.)
Cleaning part
Other : Cleaner pen (option)*, Cleaning ribbon (option)*
* Please ask the dealer about options.
How to fold tissue paper
1 Press the POWER button to turn on the power.
FEATURES
PREPARATIONS FOR CLEANING
Cleaner pen
2 Press the DOOR OPEN button to open the door.
CONNECTIONS PREPARATION
3 Remove the ink cassette.
4 Take out the print paper.
5 Press the POWER button to turn off the power.
Make sure to turn off the power before cleaning.
THERMAL HEAD CLEANING
Clean the heat-generating part below the thermal head.
Wipe the head cleaning part carefully with tissue paper dampened with a small amount of
alcohol.
NOTE
Cleaning part of thermal head
Do not damage the thermal head.
When the poor print quality is not corrected even if the head has been cleaned,
Inside
replacement of the thermal head may be required. Contact your dealer.
•
CAUTION
Thermal head is hot right after printing. Wait until the head cools before cleaning
the thermal head.
•
NOTE
The thermal head may be damaged if you touch it while static electricity builds up
on your body.
TROUBLESHOOTING
•
•
Outside
OTHERS
PAPER FLANGE CLEANING
CONTENTS
Clean the parts that contact the print paper sides as shown right.
Wipe the parts carefully with tissue paper dampened with a small amount of alcohol.
Cleaning part
19
SPECIFICATIONS
Class
Digital Color Printer
Model
Printing method
CP9600DW-S
Sublimation Dye Thermal Transfer line print
Print’s resolution
3-color faces progressive printing (yellow, magenta, and cyan) and surface lamination
600 x 600 DPI
(DPI : Dots per inch)
10x15 (4x6”)
15x23 (6x9”)
2458 x 3736 dots (300 DPI mode : 1228 x 1868 dots)
3736 x 5462 dots (300 DPI mode : 1868 x 2730 dots)
Print size
10x15 (4x6”)
15x23 (6x9”)
102 x 152mm (without frame)
152 x 229mm (without frame)
Gradations
Printing time
256 (8 bits) for each color (About 16.7 million colors)
10x15 (4x6”)
: Approx. 57 sec./sheet
(300 DPI mode : Approx. 23 sec./sheet)
Supply method
15x23 (6x9”)
Automatic
Interface
Power supply
Hi-Speed USB (Ver.2.0)
220-240 V AC 50/60 Hz, 120 V AC 50/60 Hz
Power consumption
1.6 A (220 - 240 V AC, 50/60 Hz), 2.9 A (120 V AC, 50/60 Hz) during printing
0.3 A (220 - 240 V AC, 50/60 Hz), 0.4 A (120 V AC, 50/60 Hz) when not printing
Operating conditions
Temperature :
Humidity :
Installation conditions
Outside dimensions
Operating attitude : Horizontal ±5°
300(W) x 365(D) x 325(H) mm
Weight
Standard accessories
Approx. 17 kg (excluding accessories)
Power cords (for 120 V and 230 V), Ink cassette (1), CD-ROM (1), Paper flange (1 set), Quick
(300 DPI mode : Approx. 41 sec./sheet)
CONNECTIONS PREPARATION
: Approx. 111 sec./sheet
FEATURES
Dot resolution
PRECAUTIONS
SPECIFICATIONS
5°C - 40°C
30% - 80% RH (no dewing)
TROUBLESHOOTING
setup guide (1), Paper strip bin (1), Paper catcher (1), Print outlet cover (1), Sheet for paper
guide (1), Label for installation (1)
2 Contents of CD-ROM
• Operation manual
• Adobe® Reader®
OTHERS
Adobe, the Adobe logo, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
CONTENTS
20
Mitsubishi Electric Europe B.V.
Spanish Branch (Barcelona)
Ctra. de Rubí, 76-80 - Apdo. 420
08190-Sant Cugat del Vallés - (Barcelona) Spain
Phone +34 93 565 3154
FAX +34 93 589 4388
UK Branch
Travellers Lane, Hatfield, Herts. AL10 8XB, England, U.K.
Phone +44 (0) 1707 276100
FAX +44 (0) 1707 278755
German Branch
Gothaer Strasse 8, 40880 Ratingen ; Postfach 1548, 40835 Ratingen ; Germany
Phone +49 (2102) 486-9250
FAX +49 (2102) 486-7320
French Branch
25, Boulevard des Bouvets - 92741 NANTERRE cedex, France
Phone +33 (1) 55 68 55 00
FAX +33 (1) 55 68 57 31
Italian Branch
Centro Direzionale Colleoni, Palazzo Sirio, ingresso n.1
Viale Colleoni, 7, 20041 Agrate Brianza, (Milano) Italy
Phone +39 03960531
FAX +39 0396053214
Benelux Branch
Nijverheidsweg 23a,
3641 RP Mijdrecht, The Netherlands
Phone +31 (0) 297-282461
FAX +31 (0) 297-283936
Please contact the nearest Mitsubishi sales branch to get DOC (Declaration of Conformity) of the EC Directive
1999/5/EC.
Manufactured by Mitsubishi Electric Corporation
1 Zusho Baba, Nagaokakyo-city, Kyoto Japan
WE919C150A8