- Entertainment & hobby
- Musical instruments
- Recording Equipment
- Extron electronics
- IPL T S2
- User manual
advertisement
P ANEL D RAWINGS
IPL T S2
R 1
2
COM
100
LINK
ACT
IPL T S2 (Front)
UID# 093012052
POWER
12V
.5A MAX
LAN
COM1 COM2
TX RX TX RX
COM 1
COM 2
IPL T S2 (Back)
COM 1
COM 2
COM 3
COM 4
IPL T S4
R 1
2
COM
3
4
100
LINK
ACT
IPL T S4 (Front)
UID# 008120093
POWER
12V
.5A MAX
LAN
IPL T S4 (Back)
IPL T S6
R 1
2
COM
3
4
COM
5
6
100
LINK
ACT
IPL T S6 (Front)
UID# 170208001
POWER
12V
.5A MAX
LAN
COM3 COM4 COM5 COM6
TX RX TX RX TX RX TX RX
COM 1
COM 2
IPL T S6 (Back)
A
PPLICATION
D
IAGRAM
12
2
UI
D#
09
LA
N
PO
W
12
V
ER
.5A
M
AX
Extron
IPL T S2
Ethernet-to-Serial
Interface
TCP/IP
Network
CO
M1
COM
2
TX
RX
TX
RX
Ethernet
CO
1
M
CO
User Control &
Administrator Monitoring
RS-232
RS-232
Projector
Room 1
Projector
Room 2
12
05
2
UI
D#
09
30
LA
N
.5A
V
CO
M1
M2
CO
TX
RX
TX
RX
CO
M
1
CO
M
2
Extron
IPL T S2
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
Ethernet
RS-232
DI
SP
LA Y
PO
W ER
VO LU
ME
MA X/
MIN
VC
R
DV
D
La op
ML
Me dia
Lin k C on tro
6
C 20 lle on
Extr
Extron
MediaLink or
Other Controller
Remote User Control &
Administrator Monitoring
Projector
Laptop DVD VCR
IPL T S2
Lighting
Control
UID# 093012052
LAN
PO
W
ER
12V
.5A MAX
COM 1
COM 2
COM 3
COM 2
RS-232
Extron
IPL T S4
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
Ethernet
RS-232
Extron
MAV 62
Matrix Switcher
LAY
DISP
POWER
MA
MI
VOLUME
VCR
DVD
Laptop
ML
C on
20 tro lle
Me dia Lin k C on
Extr
Extron
MediaLink or
Other Controller
Remote User
Control &
Administrator
Monitoring
Projector
Laptop DVD
VCR
Document
Camer
Projector
CODEC
COM 1
COM 2
UID# 093012052
LAN
PO
W
ER
12V
.5A MAX
CO
M2
CO M5
CO
M4
CO
M3
TX
RX
TX
RX
TX
RX
TX
RX
RS-232
Extron
IPL T S6
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
RS-232
Ethernet
DIS
PL AY
ER
POW
MA
MI
VOLUME
VCR
DVD
Laptop
Me dia
Lin k C
20
ML C on tro lle
Extr on
Extron
MediaLink or
Other Controller
Lighting
Control
Remote User
Control &
Administrator
Monitoring
Projector
Laptop DVD VCR
IPL T S6 IPL T S4
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C, 3821 AH Amersfoort
The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg.
Singapore 368363
+65.6383.4400 FAX +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Bldg. 6F, 3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074
Japan
+81.3.3511.7655 FAX +81.3.3511.7656
Copyright © 2003 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
03-03
68-817-01
REV. A
IPL T S2,
IPL T S4 & IPL T S6
IP TOOLS ™ SERIES OF ETHERNET-TO-SERIAL
INTERFACES
IPL T S2
IPL T S4
IPL T S6
The Extron IPL T S2, IPL T S4, and IPL T S6 are Ethernet-to-serial interfaces with integral Web servers that enable any Extron or third-party equipment compatible with RS-232, RS-422, or RS-485 connections to be monitored, controlled, and maintained over a high speed Local Area Network (LAN), Wide
Area Network (WAN), or the Internet.
IP LINK
■ High performance Web server
■ 2, 4, or 6 serial ports
■ Enables Ethernet monitoring and troubleshooting of RS-232, RS-422, and RS-485 compatible devices
■ Customizable Web pages
■ Proactive troubleshooting and preventive maintenance and security
■ Supports power over Ethernet
(IEEE 802.3af)
■ Compact and versatile www.extron.com
D
ESCRIPTION
The Extron IP Tools ™ Series includes three compact Ethernet-to-serial interface models with integral Web servers, enabling almost any A/V device to be controlled, monitored, and accessed from any computer connected to a Local Area Network (LAN) Wide Area Network (WAN), or the Internet.
IP (Internet Protocol) connectivity gives users the ability to remotely and proactively monitor and troubleshoot projectors, plasma displays, switchers, and other serially controlled (RS-232/422/485) products. The IP Tools Series uses Extron’s exclusive IP Link ™ technology, a high performance intelligent network solution specifically engineered to meet the needs of professional
A/V environments, from large universities and businesses to small home installations. Multiple Ethernet-enabled A/V products can be managed and supported by a technician or administrator at any time from any computer with a Web browser.
Web Server and Customizable Web Pages
IP Tools products use an integrated, high performance Web server with
1.5 MB of flash memory for storing HTML, JavaScript, Flash™ animation, and graphics files. Customizable Web pages can be created and stored using off-the-shelf software programs, such as Macromedia ® Dreamweaver ® and Microsoft ® FrontPage ® . Using intuitive Web-based software with a
Graphical User Interface (GUI), users can access a variety of A/V products connected to a network. For example, users can check the activity and status of a projector’s power, connections, lamp life, or temperature, or even turn off all projectors at once — all from the convenience of a single monitoring station.
Proactive Service and Security
Proactive service, support and preventive maintenance are also possible with IP Tools. With e-mail notification, technical support administrators can receive failure and service messages through an e-mail enabled cell phone,
PDA, pager, or Internet e-mail account. For secure installations that do not allow Internet access, online monitoring can still be performed proactively.
Within an existing secure infrastructure, e-mail notification of failures and repairs is possible without compromising the security of the A/V systems and facility.
IP Link Models
There are three IP Tools Ethernet-to-Serial interface models: IPL T S2,
IPL T S4 and IPL T S6. The only difference between the three models is the number of serial ports. Various models feature 9-pin D-sub serial ports and/or captive screw terminal serial ports, allowing for easy connection to a variety of devices. The 9-pin D-sub serial ports offer RS-232, RS-422 and
RS-485 compatibility, while the captive screw terminals support RS-232.
IPL T S2
The IPL T S2 features two 9-pin D-sub serial ports that can control two
RS-232, RS-422 or RS-485 serial devices directly. When configured for passthrough mode, the IPL T S2 can pass through commands from an existing control system and control a single device. The IPL T S2 also includes two captive screw serial ports that are connected in parallel with the 9-pin serial ports.
IPL T S4
The IPL T S4 features four 9-pin D-sub serial ports that can control four
RS-232, RS-422 or RS-485 serial devices. When configured for pass-through mode, the IPL T S4 can pass through commands from an existing control system and control two different devices.
IPL T S6
The IPL T S6 features two 9-pin D-sub serial ports that can control two
RS-232, RS-422 or RS-485 serial devices directly and four captive screw serial ports that can control four additional RS-232 devices. When configured for pass-through mode, the IPL T S6 can pass through commands from an existing control system and control three different devices.
F
EATURES
■ Powerful scripting capability – All IP Link products are capable of running sophisticated user-programmable scripts. This feature enables automated functions to operate based on assignable criteria such as turning connected equipment on or off at predetermined times and alerting individuals if an attached unit is stolen or goes offline.
■ Global compatibility – All IP Tools models use industry standard
Ethernet communication protocols, including ARP, DHCP, ICMP (ping)
TCP/IP, Telnet, HTTP, and SMTP.
■ High performance architecture – Web pages are served up to 50 times faster (6 Mbit/sec transfer rate) than many similar products, so data is refreshed at a consistently high speed.
■ Multi-user support – 200 simultaneous connections enable each
IP Link device to support many concurrent users and improve system throughput by sending information in parallel.
■ IP Link Global Viewer – The included management application software allows the user to control, monitor, and schedule various functions of serially controlled products connected to IP Tools products.
■ Two levels of security with password protection – User access level authorizes limited entry to only pre-designated functions, while administrator access level permits full access to advanced settings.
■ Real-time clock – Programmable operating alerts, sequencing, and automatic monitoring with the internal real-time clock and calendar allow the IP Tool to routinely check a device.
■ Configuration utility – A supplied Windows ® based configuration utility makes product setup simple and easy. Drivers for a wide variety of projectors and Extron A/V products are available for download from the Extron web site (www.extron.com)
■ Bi-directional serial ports – The IP Tool can control at least two separate serial (RS-232/422/485) devices, or can be inserted into existing A/V systems without losing the ability to use a local control system.
■ Power options – For added reliability, users can power up the IP Tool two different ways. With the power over LAN (IEEE 802.3af) option, there is no need for a local power supply. The included external, international power supply provides worldwide power compatibility.
■ Versatile mounting options – The IP Tools models come in a quarter rack width, 1U high metal enclosure and are rack, under-desk, and projector-mountable.
IP L
INK
™ G
LOBAL
V
IEWER
IP Tools ship with the IP Link Global Viewer. It serves as an asset management tool by allowing the user to identify which A/V products are connected to each IP Tool in the system and what its status is. The user can configure these products for control through the IP Link Global
Viewer interface. Users can implement driver packages containing all data and control functionality for a specific product or create their own drivers.
Once the products are identified and configured, the user can view the entire A/V system status via a Web browser. Each Ethernet-enabled product will have a unique IP address with links tied through the Global
Viewer device list on the left side of the screen. The user simply clicks on an icon representing the chosen device in the system. To assist in the configuration process, IP Link Global Viewer contains context sensitive help, which provides information specific to the page being configured.
Three tabs enable the user to access, control, and monitor the A/V equipment connected to the IPL T S2:
• Control – The user is able to view and manipulate such basic functions as volume, mute, video inputs, power, and more.
• Monitor – The user can view all status functions of a product at any time. For example, the user can poll the lamp hours of all connected projectors, even if the projector does not have a built-in lamp timer.
• Schedule – The user can set up schedules for troubleshooting and monitoring. For example, a user can schedule the power to turn off or on at a specific time.
A technician at an educational facility with several classrooms can access, monitor, and troubleshoot the school’s A/V equipment from a single location on campus. Using the IP Link Global Viewer software, the technician can program an IPL T S2 to track the projector lamp hours in each classroom and generate an e-mail alert at 1,350 hours, well before its life maximum of 1,500 hours. The alert can be received by e-mail via a computer, cell phone, PDA, or pager. The technician can then order and replace the new lamp before the existing one burns out. In addition, the technician can configure the projectors to power on or off at pre-selected times, and each device can be automatically monitored for its connection to the LAN. As a result, downtime is minimized because equipment is proactively serviced, a technician knows the status of all devices at any time, and utility expenses are reduced.
The IP Link Global Viewer and the IP Tool Ethernet-to-serial interface together can function as an asset management tool. With its polling and e-mail capabilities, the unit can quickly alert users to security breaches.
Also, by having access to all network-connected equipment, users can determine which devices are used most frequently and assign rooms based on an instructor’s equipment needs.
To allow for the individual needs of each environment, the software interface can be customized to display a device’s status any number of ways: color-coded buttons signaling power on or off, or bar graphs showing maximum amount of lamp hours vs. hours used. Users can also create their own look and feel by including a logo or marketing message using HTML, Flash animation, JavaScript, and more.
Control
Control basic functions as power, volume, and inputs.
Monitor
Enables proactive support by monitoring power and projector lamp hours.
Schedule
Conveniently schedule troubleshooting, automatic monitoring, or system power.
Centralize management of all A/V equipment in the building or all over the world.
Intuitive interface makes operations easier.
Web pages can be customized and tailored to meet customer needs and facilitate functionality.
Example of screen to control a matrix switcher.
Example of screen to control a matrix switcher.
S
PECIFICATIONS
CONTROL/REMOTE — CONTROL INTERFACE
Serial port number/type
IPL T S2 .................................. 2 RS-232/RS-422/RS-485 configurable serial
IPL T S4 .................................. 4 RS-232/RS-422/RS-485 configurable serial
IPL T S6 .................................. 6 RS-232/RS-422/RS-485 configurable serial
Connectors
IPL T S2 .................................. (2) 9-pin male D and (1) 3.5 mm
5-pole captive screw connector
IPL T S6 .................................. (2) 9-pin male D and (2) 3.5 mm
5-pole captive screw connectors
IPL T S4 .................................. (4) 9-pin male D
Baud rate and protocol .............. Default settings (adjustable): 9600,
8-bit, 1 stop bit, no parity
Pin configurations
Serial analog, 9-pin D
RS-232 (default) ................ 2 = RX, 3 = TX, 5 = GND, 7 = RTS,
8 = CTS
RS-422 .............................. 2 = RX-, 3 = TX-, 5 = GND,
7 = TX+, 8 = RX+
RS-485 .............................. 2&3 = data- and tie 2&3,
5 = GND, 7&8 = data+ and tie 7&8
Serial analog,
5-pole captive screw .......... 1 = COM1/3/5 TX,
2 = COM1/3/5 RX,
3 = GND,
4 = COM2/4/6 TX,
5 = COM2/4/6 RX
Ethernet control port .................. 1 RJ-45 male connector
Ethernet data rate ...................... 10/100Base-T, half/full duplex with autodetect
Ethernet protocol........................ ARP, DHCP, ICMP (ping), TCP/IP,
Telnet, HTTP, SMTP
Program control.......................... Extron’s Simple Instruction
Set ™ – SIS ™, Microsoft Explorer,
Netscape Navigator, Telnet
GENERAL
Power ........................................ 100VAC to 240VAC, 50/60 Hz,
10 watts, external, autoswitchable; to 12VDC, 1 A power supply.
Product requires 0.5 A.
Temperature/humidity ................ Storage -40° to +158°F
(-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F
(0° to +50°C) / 10% to 90%, non-condensing
Rack mount ................................ Yes, with optional 1U rack shelf, part #60-190-01, or the VersaTools rack shelf, part #60-190-20; also under-furniture mountable with optional brackets #70-212-01 or projector mountable with optional brackets #70-217-01/70-077-04
Enclosure type ............................ Metal
Enclosure dimensions.................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack width)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight .......................... 0.7 lbs (0.3 kg)
Shipping weight ........................ 3 lbs (1.4 kg)
Vibration .................................... ISTA/NSTA 1A in carton
(International Safe Transit
Association)
Listings ...................................... UL, CUL
Compliances .............................. CE, FCC Class A, VCCI, AS/NZS,
ICES
MTBF .......................................... 30,000 hours
Warranty .................................... 3 years parts and labor
Model Part Numbers
IPL T S2 Ethernet to Two-Port Serial Interface .............. 60-544-01
IPL T S4 Ethernet to Four-Port Serial Interface .............. 60-544-03
IPL T S6 Ethernet to Six-Port Serial Interface ................ 60-544-04
Optional Accessories
1U 19" VersaTools Rack Shelf Kit .................................. 60-190-20
1U 19" Rack Shelf Kit.................................................... 60-190-01
Under Desk Mount ...................................................... 70-077-01
Projector Mount Kit...................................................... 70-217-01
Specifications are subject to change without notice.
D
ESCRIPTION
The Extron IP Tools ™ Series includes three compact Ethernet-to-serial interface models with integral Web servers, enabling almost any A/V device to be controlled, monitored, and accessed from any computer connected to a Local Area Network (LAN) Wide Area Network (WAN), or the Internet.
IP (Internet Protocol) connectivity gives users the ability to remotely and proactively monitor and troubleshoot projectors, plasma displays, switchers, and other serially controlled (RS-232/422/485) products. The IP Tools Series uses Extron’s exclusive IP Link ™ technology, a high performance intelligent network solution specifically engineered to meet the needs of professional
A/V environments, from large universities and businesses to small home installations. Multiple Ethernet-enabled A/V products can be managed and supported by a technician or administrator at any time from any computer with a Web browser.
Web Server and Customizable Web Pages
IP Tools products use an integrated, high performance Web server with
1.5 MB of flash memory for storing HTML, JavaScript, Flash™ animation, and graphics files. Customizable Web pages can be created and stored using off-the-shelf software programs, such as Macromedia ® Dreamweaver ® and Microsoft ® FrontPage ® . Using intuitive Web-based software with a
Graphical User Interface (GUI), users can access a variety of A/V products connected to a network. For example, users can check the activity and status of a projector’s power, connections, lamp life, or temperature, or even turn off all projectors at once — all from the convenience of a single monitoring station.
Proactive Service and Security
Proactive service, support and preventive maintenance are also possible with IP Tools. With e-mail notification, technical support administrators can receive failure and service messages through an e-mail enabled cell phone,
PDA, pager, or Internet e-mail account. For secure installations that do not allow Internet access, online monitoring can still be performed proactively.
Within an existing secure infrastructure, e-mail notification of failures and repairs is possible without compromising the security of the A/V systems and facility.
IP Link Models
There are three IP Tools Ethernet-to-Serial interface models: IPL T S2,
IPL T S4 and IPL T S6. The only difference between the three models is the number of serial ports. Various models feature 9-pin D-sub serial ports and/or captive screw terminal serial ports, allowing for easy connection to a variety of devices. The 9-pin D-sub serial ports offer RS-232, RS-422 and
RS-485 compatibility, while the captive screw terminals support RS-232.
IPL T S2
The IPL T S2 features two 9-pin D-sub serial ports that can control two
RS-232, RS-422 or RS-485 serial devices directly. When configured for passthrough mode, the IPL T S2 can pass through commands from an existing control system and control a single device. The IPL T S2 also includes two captive screw serial ports that are connected in parallel with the 9-pin serial ports.
IPL T S4
The IPL T S4 features four 9-pin D-sub serial ports that can control four
RS-232, RS-422 or RS-485 serial devices. When configured for pass-through mode, the IPL T S4 can pass through commands from an existing control system and control two different devices.
IPL T S6
The IPL T S6 features two 9-pin D-sub serial ports that can control two
RS-232, RS-422 or RS-485 serial devices directly and four captive screw serial ports that can control four additional RS-232 devices. When configured for pass-through mode, the IPL T S6 can pass through commands from an existing control system and control three different devices.
F
EATURES
■ Powerful scripting capability – All IP Link products are capable of running sophisticated user-programmable scripts. This feature enables automated functions to operate based on assignable criteria such as turning connected equipment on or off at predetermined times and alerting individuals if an attached unit is stolen or goes offline.
■ Global compatibility – All IP Tools models use industry standard
Ethernet communication protocols, including ARP, DHCP, ICMP (ping)
TCP/IP, Telnet, HTTP, and SMTP.
■ High performance architecture – Web pages are served up to 50 times faster (6 Mbit/sec transfer rate) than many similar products, so data is refreshed at a consistently high speed.
■ Multi-user support – 200 simultaneous connections enable each
IP Link device to support many concurrent users and improve system throughput by sending information in parallel.
■ IP Link Global Viewer – The included management application software allows the user to control, monitor, and schedule various functions of serially controlled products connected to IP Tools products.
■ Two levels of security with password protection – User access level authorizes limited entry to only pre-designated functions, while administrator access level permits full access to advanced settings.
■ Real-time clock – Programmable operating alerts, sequencing, and automatic monitoring with the internal real-time clock and calendar allow the IP Tool to routinely check a device.
■ Configuration utility – A supplied Windows ® based configuration utility makes product setup simple and easy. Drivers for a wide variety of projectors and Extron A/V products are available for download from the Extron web site (www.extron.com)
■ Bi-directional serial ports – The IP Tool can control at least two separate serial (RS-232/422/485) devices, or can be inserted into existing A/V systems without losing the ability to use a local control system.
■ Power options – For added reliability, users can power up the IP Tool two different ways. With the power over LAN (IEEE 802.3af) option, there is no need for a local power supply. The included external, international power supply provides worldwide power compatibility.
■ Versatile mounting options – The IP Tools models come in a quarter rack width, 1U high metal enclosure and are rack, under-desk, and projector-mountable.
IP L
INK
™ G
LOBAL
V
IEWER
IP Tools ship with the IP Link Global Viewer. It serves as an asset management tool by allowing the user to identify which A/V products are connected to each IP Tool in the system and what its status is. The user can configure these products for control through the IP Link Global
Viewer interface. Users can implement driver packages containing all data and control functionality for a specific product or create their own drivers.
Once the products are identified and configured, the user can view the entire A/V system status via a Web browser. Each Ethernet-enabled product will have a unique IP address with links tied through the Global
Viewer device list on the left side of the screen. The user simply clicks on an icon representing the chosen device in the system. To assist in the configuration process, IP Link Global Viewer contains context sensitive help, which provides information specific to the page being configured.
Three tabs enable the user to access, control, and monitor the A/V equipment connected to the IPL T S2:
• Control – The user is able to view and manipulate such basic functions as volume, mute, video inputs, power, and more.
• Monitor – The user can view all status functions of a product at any time. For example, the user can poll the lamp hours of all connected projectors, even if the projector does not have a built-in lamp timer.
• Schedule – The user can set up schedules for troubleshooting and monitoring. For example, a user can schedule the power to turn off or on at a specific time.
A technician at an educational facility with several classrooms can access, monitor, and troubleshoot the school’s A/V equipment from a single location on campus. Using the IP Link Global Viewer software, the technician can program an IPL T S2 to track the projector lamp hours in each classroom and generate an e-mail alert at 1,350 hours, well before its life maximum of 1,500 hours. The alert can be received by e-mail via a computer, cell phone, PDA, or pager. The technician can then order and replace the new lamp before the existing one burns out. In addition, the technician can configure the projectors to power on or off at pre-selected times, and each device can be automatically monitored for its connection to the LAN. As a result, downtime is minimized because equipment is proactively serviced, a technician knows the status of all devices at any time, and utility expenses are reduced.
The IP Link Global Viewer and the IP Tool Ethernet-to-serial interface together can function as an asset management tool. With its polling and e-mail capabilities, the unit can quickly alert users to security breaches.
Also, by having access to all network-connected equipment, users can determine which devices are used most frequently and assign rooms based on an instructor’s equipment needs.
To allow for the individual needs of each environment, the software interface can be customized to display a device’s status any number of ways: color-coded buttons signaling power on or off, or bar graphs showing maximum amount of lamp hours vs. hours used. Users can also create their own look and feel by including a logo or marketing message using HTML, Flash animation, JavaScript, and more.
Control
Control basic functions as power, volume, and inputs.
Monitor
Enables proactive support by monitoring power and projector lamp hours.
Schedule
Conveniently schedule troubleshooting, automatic monitoring, or system power.
Centralize management of all A/V equipment in the building or all over the world.
Intuitive interface makes operations easier.
Web pages can be customized and tailored to meet customer needs and facilitate functionality.
Example of screen to control a matrix switcher.
Example of screen to control a matrix switcher.
S
PECIFICATIONS
CONTROL/REMOTE — CONTROL INTERFACE
Serial port number/type
IPL T S2 .................................. 2 RS-232/RS-422/RS-485 configurable serial
IPL T S4 .................................. 4 RS-232/RS-422/RS-485 configurable serial
IPL T S6 .................................. 6 RS-232/RS-422/RS-485 configurable serial
Connectors
IPL T S2 .................................. (2) 9-pin male D and (1) 3.5 mm
5-pole captive screw connector
IPL T S6 .................................. (2) 9-pin male D and (2) 3.5 mm
5-pole captive screw connectors
IPL T S4 .................................. (4) 9-pin male D
Baud rate and protocol .............. Default settings (adjustable): 9600,
8-bit, 1 stop bit, no parity
Pin configurations
Serial analog, 9-pin D
RS-232 (default) ................ 2 = RX, 3 = TX, 5 = GND, 7 = RTS,
8 = CTS
RS-422 .............................. 2 = RX-, 3 = TX-, 5 = GND,
7 = TX+, 8 = RX+
RS-485 .............................. 2&3 = data- and tie 2&3,
5 = GND, 7&8 = data+ and tie 7&8
Serial analog,
5-pole captive screw .......... 1 = COM1/3/5 TX,
2 = COM1/3/5 RX,
3 = GND,
4 = COM2/4/6 TX,
5 = COM2/4/6 RX
Ethernet control port .................. 1 RJ-45 male connector
Ethernet data rate ...................... 10/100Base-T, half/full duplex with autodetect
Ethernet protocol........................ ARP, DHCP, ICMP (ping), TCP/IP,
Telnet, HTTP, SMTP
Program control.......................... Extron’s Simple Instruction
Set ™ – SIS ™, Microsoft Explorer,
Netscape Navigator, Telnet
GENERAL
Power ........................................ 100VAC to 240VAC, 50/60 Hz,
10 watts, external, autoswitchable; to 12VDC, 1 A power supply.
Product requires 0.5 A.
Temperature/humidity ................ Storage -40° to +158°F
(-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F
(0° to +50°C) / 10% to 90%, non-condensing
Rack mount ................................ Yes, with optional 1U rack shelf, part #60-190-01, or the VersaTools rack shelf, part #60-190-20; also under-furniture mountable with optional brackets #70-212-01 or projector mountable with optional brackets #70-217-01/70-077-04
Enclosure type ............................ Metal
Enclosure dimensions.................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack width)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight .......................... 0.7 lbs (0.3 kg)
Shipping weight ........................ 3 lbs (1.4 kg)
Vibration .................................... ISTA/NSTA 1A in carton
(International Safe Transit
Association)
Listings ...................................... UL, CUL
Compliances .............................. CE, FCC Class A, VCCI, AS/NZS,
ICES
MTBF .......................................... 30,000 hours
Warranty .................................... 3 years parts and labor
Model Part Numbers
IPL T S2 Ethernet to Two-Port Serial Interface .............. 60-544-01
IPL T S4 Ethernet to Four-Port Serial Interface .............. 60-544-03
IPL T S6 Ethernet to Six-Port Serial Interface ................ 60-544-04
Optional Accessories
1U 19" VersaTools Rack Shelf Kit .................................. 60-190-20
1U 19" Rack Shelf Kit.................................................... 60-190-01
Under Desk Mount ...................................................... 70-077-01
Projector Mount Kit...................................................... 70-217-01
Specifications are subject to change without notice.
D
ESCRIPTION
The Extron IP Tools ™ Series includes three compact Ethernet-to-serial interface models with integral Web servers, enabling almost any A/V device to be controlled, monitored, and accessed from any computer connected to a Local Area Network (LAN) Wide Area Network (WAN), or the Internet.
IP (Internet Protocol) connectivity gives users the ability to remotely and proactively monitor and troubleshoot projectors, plasma displays, switchers, and other serially controlled (RS-232/422/485) products. The IP Tools Series uses Extron’s exclusive IP Link ™ technology, a high performance intelligent network solution specifically engineered to meet the needs of professional
A/V environments, from large universities and businesses to small home installations. Multiple Ethernet-enabled A/V products can be managed and supported by a technician or administrator at any time from any computer with a Web browser.
Web Server and Customizable Web Pages
IP Tools products use an integrated, high performance Web server with
1.5 MB of flash memory for storing HTML, JavaScript, Flash™ animation, and graphics files. Customizable Web pages can be created and stored using off-the-shelf software programs, such as Macromedia ® Dreamweaver ® and Microsoft ® FrontPage ® . Using intuitive Web-based software with a
Graphical User Interface (GUI), users can access a variety of A/V products connected to a network. For example, users can check the activity and status of a projector’s power, connections, lamp life, or temperature, or even turn off all projectors at once — all from the convenience of a single monitoring station.
Proactive Service and Security
Proactive service, support and preventive maintenance are also possible with IP Tools. With e-mail notification, technical support administrators can receive failure and service messages through an e-mail enabled cell phone,
PDA, pager, or Internet e-mail account. For secure installations that do not allow Internet access, online monitoring can still be performed proactively.
Within an existing secure infrastructure, e-mail notification of failures and repairs is possible without compromising the security of the A/V systems and facility.
IP Link Models
There are three IP Tools Ethernet-to-Serial interface models: IPL T S2,
IPL T S4 and IPL T S6. The only difference between the three models is the number of serial ports. Various models feature 9-pin D-sub serial ports and/or captive screw terminal serial ports, allowing for easy connection to a variety of devices. The 9-pin D-sub serial ports offer RS-232, RS-422 and
RS-485 compatibility, while the captive screw terminals support RS-232.
IPL T S2
The IPL T S2 features two 9-pin D-sub serial ports that can control two
RS-232, RS-422 or RS-485 serial devices directly. When configured for passthrough mode, the IPL T S2 can pass through commands from an existing control system and control a single device. The IPL T S2 also includes two captive screw serial ports that are connected in parallel with the 9-pin serial ports.
IPL T S4
The IPL T S4 features four 9-pin D-sub serial ports that can control four
RS-232, RS-422 or RS-485 serial devices. When configured for pass-through mode, the IPL T S4 can pass through commands from an existing control system and control two different devices.
IPL T S6
The IPL T S6 features two 9-pin D-sub serial ports that can control two
RS-232, RS-422 or RS-485 serial devices directly and four captive screw serial ports that can control four additional RS-232 devices. When configured for pass-through mode, the IPL T S6 can pass through commands from an existing control system and control three different devices.
F
EATURES
■ Powerful scripting capability – All IP Link products are capable of running sophisticated user-programmable scripts. This feature enables automated functions to operate based on assignable criteria such as turning connected equipment on or off at predetermined times and alerting individuals if an attached unit is stolen or goes offline.
■ Global compatibility – All IP Tools models use industry standard
Ethernet communication protocols, including ARP, DHCP, ICMP (ping)
TCP/IP, Telnet, HTTP, and SMTP.
■ High performance architecture – Web pages are served up to 50 times faster (6 Mbit/sec transfer rate) than many similar products, so data is refreshed at a consistently high speed.
■ Multi-user support – 200 simultaneous connections enable each
IP Link device to support many concurrent users and improve system throughput by sending information in parallel.
■ IP Link Global Viewer – The included management application software allows the user to control, monitor, and schedule various functions of serially controlled products connected to IP Tools products.
■ Two levels of security with password protection – User access level authorizes limited entry to only pre-designated functions, while administrator access level permits full access to advanced settings.
■ Real-time clock – Programmable operating alerts, sequencing, and automatic monitoring with the internal real-time clock and calendar allow the IP Tool to routinely check a device.
■ Configuration utility – A supplied Windows ® based configuration utility makes product setup simple and easy. Drivers for a wide variety of projectors and Extron A/V products are available for download from the Extron web site (www.extron.com)
■ Bi-directional serial ports – The IP Tool can control at least two separate serial (RS-232/422/485) devices, or can be inserted into existing A/V systems without losing the ability to use a local control system.
■ Power options – For added reliability, users can power up the IP Tool two different ways. With the power over LAN (IEEE 802.3af) option, there is no need for a local power supply. The included external, international power supply provides worldwide power compatibility.
■ Versatile mounting options – The IP Tools models come in a quarter rack width, 1U high metal enclosure and are rack, under-desk, and projector-mountable.
IP L
INK
™ G
LOBAL
V
IEWER
IP Tools ship with the IP Link Global Viewer. It serves as an asset management tool by allowing the user to identify which A/V products are connected to each IP Tool in the system and what its status is. The user can configure these products for control through the IP Link Global
Viewer interface. Users can implement driver packages containing all data and control functionality for a specific product or create their own drivers.
Once the products are identified and configured, the user can view the entire A/V system status via a Web browser. Each Ethernet-enabled product will have a unique IP address with links tied through the Global
Viewer device list on the left side of the screen. The user simply clicks on an icon representing the chosen device in the system. To assist in the configuration process, IP Link Global Viewer contains context sensitive help, which provides information specific to the page being configured.
Three tabs enable the user to access, control, and monitor the A/V equipment connected to the IPL T S2:
• Control – The user is able to view and manipulate such basic functions as volume, mute, video inputs, power, and more.
• Monitor – The user can view all status functions of a product at any time. For example, the user can poll the lamp hours of all connected projectors, even if the projector does not have a built-in lamp timer.
• Schedule – The user can set up schedules for troubleshooting and monitoring. For example, a user can schedule the power to turn off or on at a specific time.
A technician at an educational facility with several classrooms can access, monitor, and troubleshoot the school’s A/V equipment from a single location on campus. Using the IP Link Global Viewer software, the technician can program an IPL T S2 to track the projector lamp hours in each classroom and generate an e-mail alert at 1,350 hours, well before its life maximum of 1,500 hours. The alert can be received by e-mail via a computer, cell phone, PDA, or pager. The technician can then order and replace the new lamp before the existing one burns out. In addition, the technician can configure the projectors to power on or off at pre-selected times, and each device can be automatically monitored for its connection to the LAN. As a result, downtime is minimized because equipment is proactively serviced, a technician knows the status of all devices at any time, and utility expenses are reduced.
The IP Link Global Viewer and the IP Tool Ethernet-to-serial interface together can function as an asset management tool. With its polling and e-mail capabilities, the unit can quickly alert users to security breaches.
Also, by having access to all network-connected equipment, users can determine which devices are used most frequently and assign rooms based on an instructor’s equipment needs.
To allow for the individual needs of each environment, the software interface can be customized to display a device’s status any number of ways: color-coded buttons signaling power on or off, or bar graphs showing maximum amount of lamp hours vs. hours used. Users can also create their own look and feel by including a logo or marketing message using HTML, Flash animation, JavaScript, and more.
Control
Control basic functions as power, volume, and inputs.
Monitor
Enables proactive support by monitoring power and projector lamp hours.
Schedule
Conveniently schedule troubleshooting, automatic monitoring, or system power.
Centralize management of all A/V equipment in the building or all over the world.
Intuitive interface makes operations easier.
Web pages can be customized and tailored to meet customer needs and facilitate functionality.
Example of screen to control a matrix switcher.
Example of screen to control a matrix switcher.
S
PECIFICATIONS
CONTROL/REMOTE — CONTROL INTERFACE
Serial port number/type
IPL T S2 .................................. 2 RS-232/RS-422/RS-485 configurable serial
IPL T S4 .................................. 4 RS-232/RS-422/RS-485 configurable serial
IPL T S6 .................................. 6 RS-232/RS-422/RS-485 configurable serial
Connectors
IPL T S2 .................................. (2) 9-pin male D and (1) 3.5 mm
5-pole captive screw connector
IPL T S6 .................................. (2) 9-pin male D and (2) 3.5 mm
5-pole captive screw connectors
IPL T S4 .................................. (4) 9-pin male D
Baud rate and protocol .............. Default settings (adjustable): 9600,
8-bit, 1 stop bit, no parity
Pin configurations
Serial analog, 9-pin D
RS-232 (default) ................ 2 = RX, 3 = TX, 5 = GND, 7 = RTS,
8 = CTS
RS-422 .............................. 2 = RX-, 3 = TX-, 5 = GND,
7 = TX+, 8 = RX+
RS-485 .............................. 2&3 = data- and tie 2&3,
5 = GND, 7&8 = data+ and tie 7&8
Serial analog,
5-pole captive screw .......... 1 = COM1/3/5 TX,
2 = COM1/3/5 RX,
3 = GND,
4 = COM2/4/6 TX,
5 = COM2/4/6 RX
Ethernet control port .................. 1 RJ-45 male connector
Ethernet data rate ...................... 10/100Base-T, half/full duplex with autodetect
Ethernet protocol........................ ARP, DHCP, ICMP (ping), TCP/IP,
Telnet, HTTP, SMTP
Program control.......................... Extron’s Simple Instruction
Set ™ – SIS ™, Microsoft Explorer,
Netscape Navigator, Telnet
GENERAL
Power ........................................ 100VAC to 240VAC, 50/60 Hz,
10 watts, external, autoswitchable; to 12VDC, 1 A power supply.
Product requires 0.5 A.
Temperature/humidity ................ Storage -40° to +158°F
(-40° to +70°C) / 10% to 90%, non-condensing
Operating +32° to +122°F
(0° to +50°C) / 10% to 90%, non-condensing
Rack mount ................................ Yes, with optional 1U rack shelf, part #60-190-01, or the VersaTools rack shelf, part #60-190-20; also under-furniture mountable with optional brackets #70-212-01 or projector mountable with optional brackets #70-217-01/70-077-04
Enclosure type ............................ Metal
Enclosure dimensions.................. 1.7" H x 4.3" W x 3.0" D
(1U high, quarter rack width)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)
Product weight .......................... 0.7 lbs (0.3 kg)
Shipping weight ........................ 3 lbs (1.4 kg)
Vibration .................................... ISTA/NSTA 1A in carton
(International Safe Transit
Association)
Listings ...................................... UL, CUL
Compliances .............................. CE, FCC Class A, VCCI, AS/NZS,
ICES
MTBF .......................................... 30,000 hours
Warranty .................................... 3 years parts and labor
Model Part Numbers
IPL T S2 Ethernet to Two-Port Serial Interface .............. 60-544-01
IPL T S4 Ethernet to Four-Port Serial Interface .............. 60-544-03
IPL T S6 Ethernet to Six-Port Serial Interface ................ 60-544-04
Optional Accessories
1U 19" VersaTools Rack Shelf Kit .................................. 60-190-20
1U 19" Rack Shelf Kit.................................................... 60-190-01
Under Desk Mount ...................................................... 70-077-01
Projector Mount Kit...................................................... 70-217-01
Specifications are subject to change without notice.
P ANEL D RAWINGS
IPL T S2
R 1
2
COM
100
LINK
ACT
IPL T S2 (Front)
UID# 093012052
POWER
12V
.5A MAX
LAN
COM1 COM2
TX RX TX RX
COM 1
COM 2
IPL T S2 (Back)
COM 1
COM 2
COM 3
COM 4
IPL T S4
R 1
2
COM
3
4
100
LINK
ACT
IPL T S4 (Front)
UID# 008120093
POWER
12V
.5A MAX
LAN
IPL T S4 (Back)
IPL T S6
R 1
2
COM
3
4
COM
5
6
100
LINK
ACT
IPL T S6 (Front)
UID# 170208001
POWER
12V
.5A MAX
LAN
COM3 COM4 COM5 COM6
TX RX TX RX TX RX TX RX
COM 1
COM 2
IPL T S6 (Back)
A
PPLICATION
D
IAGRAM
12
2
UI
D#
09
LA
N
PO
W
12
V
ER
.5A
M
AX
Extron
IPL T S2
Ethernet-to-Serial
Interface
TCP/IP
Network
CO
M1
COM
2
TX
RX
TX
RX
Ethernet
CO
1
M
CO
User Control &
Administrator Monitoring
RS-232
RS-232
Projector
Room 1
Projector
Room 2
12
05
2
UI
D#
09
30
LA
N
.5A
V
CO
M1
M2
CO
TX
RX
TX
RX
CO
M
1
CO
M
2
Extron
IPL T S2
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
Ethernet
RS-232
DI
SP
LA Y
PO
W ER
VO LU
ME
MA X/
MIN
VC
R
DV
D
La op
ML
Me dia
Lin k C on tro
6
C 20 lle on
Extr
Extron
MediaLink or
Other Controller
Remote User Control &
Administrator Monitoring
Projector
Laptop DVD VCR
IPL T S2
Lighting
Control
UID# 093012052
LAN
PO
W
ER
12V
.5A MAX
COM 1
COM 2
COM 3
COM 2
RS-232
Extron
IPL T S4
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
Ethernet
RS-232
Extron
MAV 62
Matrix Switcher
LAY
DISP
POWER
MA
MI
VOLUME
VCR
DVD
Laptop
ML
C on
20 tro lle
Me dia Lin k C on
Extr
Extron
MediaLink or
Other Controller
Remote User
Control &
Administrator
Monitoring
Projector
Laptop DVD
VCR
Document
Camer
Projector
CODEC
COM 1
COM 2
UID# 093012052
LAN
PO
W
ER
12V
.5A MAX
CO
M2
CO M5
CO
M4
CO
M3
TX
RX
TX
RX
TX
RX
TX
RX
RS-232
Extron
IPL T S6
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
RS-232
Ethernet
DIS
PL AY
ER
POW
MA
MI
VOLUME
VCR
DVD
Laptop
Me dia
Lin k C
20
ML C on tro lle
Extr on
Extron
MediaLink or
Other Controller
Lighting
Control
Remote User
Control &
Administrator
Monitoring
Projector
Laptop DVD VCR
IPL T S6 IPL T S4
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C, 3821 AH Amersfoort
The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg.
Singapore 368363
+65.6383.4400 FAX +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Bldg. 6F, 3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074
Japan
+81.3.3511.7655 FAX +81.3.3511.7656
Copyright © 2003 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
03-03
68-817-01
REV. A
IPL T S2,
IPL T S4 & IPL T S6
IP TOOLS ™ SERIES OF ETHERNET-TO-SERIAL
INTERFACES
IPL T S2
IPL T S4
IPL T S6
The Extron IPL T S2, IPL T S4, and IPL T S6 are Ethernet-to-serial interfaces with integral Web servers that enable any Extron or third-party equipment compatible with RS-232, RS-422, or RS-485 connections to be monitored, controlled, and maintained over a high speed Local Area Network (LAN), Wide
Area Network (WAN), or the Internet.
IP LINK
■ High performance Web server
■ 2, 4, or 6 serial ports
■ Enables Ethernet monitoring and troubleshooting of RS-232, RS-422, and RS-485 compatible devices
■ Customizable Web pages
■ Proactive troubleshooting and preventive maintenance and security
■ Supports power over Ethernet
(IEEE 802.3af)
■ Compact and versatile www.extron.com
P ANEL D RAWINGS
IPL T S2
R 1
2
COM
100
LINK
ACT
IPL T S2 (Front)
UID# 093012052
POWER
12V
.5A MAX
LAN
COM1 COM2
TX RX TX RX
COM 1
COM 2
IPL T S2 (Back)
COM 1
COM 2
COM 3
COM 4
IPL T S4
R 1
2
COM
3
4
100
LINK
ACT
IPL T S4 (Front)
UID# 008120093
POWER
12V
.5A MAX
LAN
IPL T S4 (Back)
IPL T S6
R 1
2
COM
3
4
COM
5
6
100
LINK
ACT
IPL T S6 (Front)
UID# 170208001
POWER
12V
.5A MAX
LAN
COM3 COM4 COM5 COM6
TX RX TX RX TX RX TX RX
COM 1
COM 2
IPL T S6 (Back)
A
PPLICATION
D
IAGRAM
12
2
UI
D#
09
LA
N
PO
W
12
V
ER
.5A
M
AX
Extron
IPL T S2
Ethernet-to-Serial
Interface
TCP/IP
Network
CO
M1
COM
2
TX
RX
TX
RX
Ethernet
CO
1
M
CO
User Control &
Administrator Monitoring
RS-232
RS-232
Projector
Room 1
Projector
Room 2
12
05
2
UI
D#
09
30
LA
N
.5A
V
CO
M1
M2
CO
TX
RX
TX
RX
CO
M
1
CO
M
2
Extron
IPL T S2
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
Ethernet
RS-232
DI
SP
LA Y
PO
W ER
VO LU
ME
MA X/
MIN
VC
R
DV
D
La op
ML
Me dia
Lin k C on tro
6
C 20 lle on
Extr
Extron
MediaLink or
Other Controller
Remote User Control &
Administrator Monitoring
Projector
Laptop DVD VCR
IPL T S2
Lighting
Control
UID# 093012052
LAN
PO
W
ER
12V
.5A MAX
COM 1
COM 2
COM 3
COM 2
RS-232
Extron
IPL T S4
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
Ethernet
RS-232
Extron
MAV 62
Matrix Switcher
LAY
DISP
POWER
MA
MI
VOLUME
VCR
DVD
Laptop
ML
C on
20 tro lle
Me dia Lin k C on
Extr
Extron
MediaLink or
Other Controller
Remote User
Control &
Administrator
Monitoring
Projector
Laptop DVD
VCR
Document
Camer
Projector
CODEC
COM 1
COM 2
UID# 093012052
LAN
PO
W
ER
12V
.5A MAX
CO
M2
CO M5
CO
M4
CO
M3
TX
RX
TX
RX
TX
RX
TX
RX
RS-232
Extron
IPL T S6
Ethernet to Serial
Interface
RS-232
TCP/IP
Network
RS-232
Ethernet
DIS
PL AY
ER
POW
MA
MI
VOLUME
VCR
DVD
Laptop
Me dia
Lin k C
20
ML C on tro lle
Extr on
Extron
MediaLink or
Other Controller
Lighting
Control
Remote User
Control &
Administrator
Monitoring
Projector
Laptop DVD VCR
IPL T S6 IPL T S4
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
800.633.9876 714.491.1500
FAX 714.491.1517
Extron Electronics, Europe
Beeldschermweg 6C, 3821 AH Amersfoort
The Netherlands
+800.3987.6673 +31.33.453.4040
FAX +31.33.453.4050
Extron Electronics, Asia
135 Joo Seng Rd. #04-01
PM Industrial Bldg.
Singapore 368363
+65.6383.4400 FAX +65.6383.4664
Extron Electronics, Japan
Daisan DMJ Bldg. 6F, 3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074
Japan
+81.3.3511.7655 FAX +81.3.3511.7656
Copyright © 2003 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
03-03
68-817-01
REV. A
IPL T S2,
IPL T S4 & IPL T S6
IP TOOLS ™ SERIES OF ETHERNET-TO-SERIAL
INTERFACES
IPL T S2
IPL T S4
IPL T S6
The Extron IPL T S2, IPL T S4, and IPL T S6 are Ethernet-to-serial interfaces with integral Web servers that enable any Extron or third-party equipment compatible with RS-232, RS-422, or RS-485 connections to be monitored, controlled, and maintained over a high speed Local Area Network (LAN), Wide
Area Network (WAN), or the Internet.
IP LINK
■ High performance Web server
■ 2, 4, or 6 serial ports
■ Enables Ethernet monitoring and troubleshooting of RS-232, RS-422, and RS-485 compatible devices
■ Customizable Web pages
■ Proactive troubleshooting and preventive maintenance and security
■ Supports power over Ethernet
(IEEE 802.3af)
■ Compact and versatile www.extron.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project