Samsung SDP-900DXA User`s manual

ENGLISH
English
French
German
Italian
USER'S MANUAL
SDP-900DXA
Before attempting to operate this product, Please read the instructions carefully.
www.samsungpresenter.com
Spanish
HIGH RESOLUTION DIGITAL PRESENTER
SDP-900DXA
Special features
Thank you for purchasing this product.
This product is a high resolution digital presenter that can project all kinds of data on a PC monitor, a TV or a
large screen with simple operations.
12X optical zoom lens and 3X digital zoom
By adopting 12X super optic angle zoom lens, it is possible to
shoot all materials from the size of a 35mm film to A4 size.
Adopting 850,000 pixels CCD
By adopting 1/3 inch PS type CCD, the high resolution and the
excellent color reproduction are realized.
Can control USB 2.0/1.1 and RS-232C
Especially by using USB, it is possible to view or store the real
time image in a PC and control the functions in a moment. Also it
is possible to control the functions by using RS-232C port.
DVI port embedded
By adopting DVI(Digital Visual Interface) output port,
SDP-900DXA presents vivid and noise-less images.
Remote controller is a standard feature
Remote controllers are supplied as a standard feature for the
product so that it can be controlled from a distance. It gives extra
convenience during a bussiness conference.
TV output mode
By adopting TV output various image data can be easily recorded
in VCRs.
Page 2
English
Features
French
German
Various image control
Digital features on your Digital Presenter provide useful and
various image controls including:
- Negative/Positive image conversion
- Brightness and Red/Blue color control
- Image rotation
- Image save/recall
- Image freeze
- Image divide
Input source selection
You can quickly switch between your computer presentation and
your document presentation with the INT/EXT button on the
control panel or on the remote controller.
Custom user settings
To avoid any interruption of presentation to reset the digital
presenter, you can preset up to 4 customized settings in the
memory and simply recall it during the presentation.
Italian
Support GUI menu system
The SDP-900DXA supports GUI menu system to control various
function of digital presenter with mouse operation.
Spanish
Page
3
SDP-900DXA
Contents
Product features and structure
Safety precautions..................................................................5
Uses of digital presenter ........................................................6
Supplied accessories .............................................................7
Name and function of each part ............................................8
Front side............................................................................8
Main control panel ............................................................10
Terminals at the back .......................................................11
On the remote controller ...................................................12
Operation methods
Set preparation......................................................................14
Connecting to output device ...............................................15
PC Monitor,Projector or DVI supporting device ................15
Desktop computer.............................................................16
Computer ..........................................................................17
PS/2 Mouse ......................................................................17
Using the presenter ..............................................................18
To show the image received from external device ...........18
To project an object on the digital presenter.....................20
Adjusting your image ...........................................................23
Adjusting your image with GUI............................................28
Image section ..................................................................28
Digital section ...................................................................31
Miscellaneous section.......................................................35
Exit section .......................................................................37
Changing your image with Draw ........................................38
Before requesting service
Storage...................................................................................41
Trouble shooting...................................................................43
Battery replacement .............................................................44
Specifications........................................................................45
Page
4
French
10. Never push objects of any kind through cabinet
slots. Never spill liquid of any kind into the
presenter.
11. Except as specifically explained in this User's
Manual, do not attempt to service this product
yourself. Refer all servicing to qualified service
personnel. Opening or removing covers may
expose you to dangerous voltages and other
hazards.
12. Unplug the presenter during lightning storms or
when it will not be used for extended periods.
13. Do not place the presenter and remote controller
on top of heat-producing equipment or in a
heated place, such as a car.
14. Unplug the presenter from the wall outlet and
refer servicing to qualified service personnel
under the following conditions:
• When the power cord or plug is damaged or
frayed.
• If liquid has been spilled into the presenter, or it
has been exposed to rain or water.
• If it does not operate normally when you follow
the operating instructions, or if it exhibits a
distinct change in performance, indicating a
need for service.
• If it has been dropped or the cabinet has been
damaged.
German
Follow these safety instructions when setting up
and using your Digital Presenter:
1. Do not place the presenter on an unstable cart,
stand, or table
2. Do not use the presenter near water or sources of
heat.
3. Use the type of power source indicated on the
presenter. If you are not sure of the power
available, consult your dealer or power company.
4. Place the presenter near a wall outlet where the
plug can be easily unplugged.
5. Take the following precautions for the plug.
Failure to comply with these precautions could
result in sparks or fire:
Do not insert the plug into an outlet with dust
present. Insert the plug firmly into the outlet.
6. Do not overload wall outlets, extension cords, or
integral convenience receptacles. This can cause
fire or electric shock.
7. Do not place the presenter where the cord can be
walked on. It may result in fraying or damage to
the plug.
8. Unplug the presenter from the wall outlet before
cleaning. Use a damp cloth for cleaning. Do not
use liquid or aerosol cleaners.
9. Do not block the slots and openings in the
presenter case. They provide ventilation and
prevent the presenter from overheating. Do not put
the presenter on a sofa, rug, or other soft surface
or in a built-in installation, unless proper ventilation
is provided.
English
Safety precautions
Italian
Spanish
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Page
5
SDP-900DXA
Uses of digital presenter
Conference
Detailed information in a report, form, table, etc. as well
as a three dimensional object, such as a model, can be
projected on a screen clearly that all the participants
can focus on the same topic during a conference. Thus
it is very helpful for an effective progress of a
conference.
Education
It can be used as an audiovisual tool for printed
materials, such as text books, as well as audiovisual
materials, educational materials, and especially for
students' art works.
Medicine and science areas
Advertisement and design areas
It is possible to present various visual data including
slides and X-ray film etc. at a medical conference or a
doctors' association in the order of file.
It is useful in design area where visualization is
necessary. It is possible to project catalogs and
slides, thus the effect of a job can be checked easily.
Demonstration or exhibition
By connecting to a large projector, it can produce
dynamic images at a new product demonstration, an
exhibition, or an event.
Page
6
English
Supplied accessories
When you unpack your Digital Presenter, make sure that you have all these components.
C-Composite cable
DVI cable
S-video cable
Remote controller
Power cable
PS/2 Mouse
Lens cap
PC Monitor cable
USB Cable
SDP-900DXA program
etc.
French
User's Manual
German
Italian
Spanish
Dust cover
Page
7
SDP-900DXA
Name and function of each part
Front side
Page
8
English
1
Lens
Main support
3
Main lock button
German
2
French
Can rotate to the front and back.
Press to move the main support.
4
Lamp unit
(Upper lamp)
5
Document plate
(built-in light box)
Italian
Main control panel
7
IR Sensor
Spanish
6
Page
9
SDP-900DXA
Name and function of each part
Main control panel
The buttons on the main control panel can be found in the remote controller. These buttons perform the same
functions.
1
2
3
4
5
6
7
10
AF
Use this to turn the power on or off.
Use this adjust the focus automatically.
FREEZE
INT / EXT
Use this to freeze the image.
Use this to select internal or external image
INT: to view the image on this product.
EXT: to view the VGA output from another device
such as a PC monitor or a projector by
connecting it to this product.
Use this to control the color automatically.
ZOOM
Use this to control the size of an object
projected on the screen.
TXT / IMG
Use this to control the sharpness of the output
image.
ROTATE
Use this to rotate the image.
10
9
POWER
AWC
Page
8
LAMP
Use this to turn the upper lamp or light box on or
off.
IRIS
Use this to control the brightness of the
image by using the iris.
English
Name and function of each part
Terminals at the back
3
4
5
7
8
9
10
German
2
French
1
6
THE KENSINGTON SECURITY SLOT
DVI OUTPUT
Connect Kensington Slim MicroSaver security
cable to this slot to attach the presenter to an
immovable object.
Connect this to the monitor or projector by
supplied DVI cable.
VGA VIDEO INPUT 1,2
MOUSE
Use this to connect PS/2 Mouse. (See page 17.)
VGA VIDEO OUTPUT 1,2
Connect this to the RGB input terminal of a PC
monitor or a projector by supplied PC cable.
RS-232C: COMPUTER CONNECTION
TERMINAL
Italian
S-VIDEO OUTPUT
Connect this to the VGA output terminal of
another device by supplied PC cable.
When external input menu is selected, the image
is shown through the VGA out terminal.
Use this to connect RS-232C cable.
This is the video output terminal connecting to a
TV that has S-video input terminal.
Connect this to the TV input terminal.
Even when the external input menu is selected,
only the image on the main unit is displayed on
TV output terminal.
USB: COMPUTER CONNECTION
TERMINAL
Use this to connect USB cable when transmitting
image by USB port.
POWER INPUT TERMINAL
Use this to connect the power cable.
(DC 12V)
Page
11
Spanish
TV OUTPUT
SDP-900DXA
Name and function of each part
On the remote controller
POW
ER
1
INT
3
/EX
2
T
TXT
/IMG
FOC
US
LAM
P
F
5
1
+
N
7
Neg
T+
BR
IT
NTS
16
ROT
ATE
IGH
E
IGH
C/PA
TEL
T-
9
10
11
EZE
BR
WID
EX
6
3X3
FRE
15
-
8
si
6
+
3
5
7
a/Po
12
E
AW
C
8
BLU
2
4
AF
4
RED
E
14
13
L
PR
ES
SAV
E
RE
CA
ET
17
SAV
LL
E
DIV
IDE
AC
T
IVE
SH
IFT
DIG
ITA
LP
RE
Page
12
SE
NT
ER
18
English
ROTATE
Turns power on or off.
Use this to rotate the image by 90˚, 180˚, 270˚,
0˚.
French
POWER
Allows to choose the signal inputs to be
displayed.
TXT/IMG
Controls the sharpness of the output image.
Switches for TEXT mode or IMAGE mode.
German
INT/EXT
WIDE/TELE
• Reduces the image size.
• Enlarges the image size.
BRIGHT + / BRIGHT • Increases the brightness.
• Decreases the brightness.
LAMP
Turns the upper lamps and/or lightbox on or off.
EXIT
FOCUS
Stops current function and returns to the normal
mode.
Allows to focus on an object.
F: Used to focus on an object which is in the far
distance.
N: Used to focus on an object being close.
NTSC/PAL
• Switches Video output mode to NTSC or PAL.
RED/BLUE/AWC
PRESET
Adjusts the image color.
R +/-: Adjusts the red color.
B +/-: Adjusts the blue color.
AWC: Adjusts color automatically.
• SAVE:saves the customized user setting values.
• ACTIVE:activates the preset user settings.
SAVE/RECALL
NEGA/POSI
DIVIDE
Switches for negative or positive film.
Divides the screen to show both the current
image and the image recalled from the memory
simultaneously on one screen.
FREEZE
Keeps the current image on the screen.
Switches to 3X3 Multi ON or 3X3 Multi OFF.
SHIFT
Spanish
3X3 MODE
Italian
Use this to adjust the focus automatically.
• Saves the projected image into the memory of
this unit.
• Recalls the image from the memory.
AF
Shifts the recalled image shown in the divided
screen from the left to right to show the hidden
portion of the image.
Page
13
SDP-900DXA
Set preparation
1
Press the main lock button and
raise the main support
2
Raise the lamp unit until it is
convenient for use, and set it to
the center of the document plate.
2
1
3
Adjust the angle of the lamps
properly.
4
Turn the lens area to face
downward.
5
Remove the lens cap.
6
Plug the power cord in.
110V
220V
Page
14
English
Connecting to output device
PC Monitor, Projector or DVI supporting devices
French
German
Connect a TV, PC monitor, Projector and DVI
supporting devices(Monitor or Projector)to this
presenter to display the projected images using the
appropriate cable.
Connection
Connect to the
VGA input terminal
PC monitor cable
PC monitor, projector, etc
Connect to the DVI input terminal
Digital Presenter
DVI cable
Italian
Monitor, projector, etc
Digital Presenter
Spanish
Digital Presenter
Page
15
SDP-900DXA
Connecting to output device
Connecting computer
Connect a desktop PC and the presenter using USB
cable and install the supplied program. You can see
the projected image on the PC monitor and control the
image using the program.
RS-232C connection is available for advanced user.
If you connect a PC with RS-232C cable, you should
set up your PC and make your own program to control
the projected image on PC. Ask your dealer for further
details.
USB connection
Connect to the USB port on your PC,
then install the supplied SDP-900DXA program.
Caution
Digital Presenter
We recommend you to connect to USB port which is attached on computer main board.
(It can make troubles in extended front-side USB port or USB hub without power in
accordance with computers.) Be sure to use the USB cable shorter than 5.0 m.
RS-232C connection
Connect the cable to the
RS-232C terminal on your PC.
RS-232C cable is not provided with the presenter.
You can obtain one from your computer dealer.
Page
16
Digital Presenter
English
Connecting to output device
French
German
If you connect a computer
through VGA IN port, you can
receive video signal from the
computer.
Connection
Connect the cable to the
VGA input terminal
PC monitor, projector, etc.
Digital Presenter
Connect to VGA IN terminal using the VGA cable from the computer. VGA IN terminal is available.
Connect the cable to VGA port on the computer equipped with XGA, SXGA, UXGA graphic card.
PS/2 Mouse
Italian
If you connect PS/2 mouse through MOUSE port, you can control various functions of digital presenter.
(See page 28.)
Spanish
Kensington Security Slot
Secure your presenter in seconds by wrapping the sleek, strong steel cable around an immovable object,
inserting the lock into the Kensington Security Slot, and turning the key.
The security cable is not
provided with the presenter.
You can obtain one from your
computer dealer.
Page
17
SDP-900DXA
Using the presenter
To show the image received from external devices
1
2
3
Set up your digital presenter properly.
(See page 15.)
Connect the input device from which you want to receive the image and the output device in which you
want to show the image.
(See pages 15 through 17.)
Turn the power of the input and output device on, and the digital presenter on.
POW
INT
ER
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
E
2
4
AF
BLU
+
-
3
5
7
-
AW
When the digital presenter is powered on, the upper lamp turns on.
To turn it off, press LAMP button of the presenter twice.
POW
INT
ER
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
Page
18
3
5
7
6
8
3X3
a/Po
si
+
AW
C
Neg
E
2
4
AF
BLU
French
4
English
Using the presenter
Choose the video source with the INT/EXT button of the presenter.
INT
German
POW
ER
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
BLU
E
2
4
+
-
3
5
7
AW
-
• Each time you press the button, the display shows
EXT1 OUT, EXT2 OUT, INT OUT.
• EXT1 OUT, EXT2 OUT
View the image from an external VGA output
device through a PC monitor or a projector
connected to the digital presenter.
• INT OUT
Choose this mode to show the image through the
lens of the digital presenter.
Italian
• If Blank Image is displayed, check if the external input device is connected properly.
• Although you select INT or EXT1/EXT2, the current status is not displayed.
• By DVI port you cannot recieve the image from external device.
5
Spanish
Open the image on the computer. Now you see the image through a PC monitor or a projector.
Page
19
SDP-900DXA
Using the presenter
To project an object on the digital presenter
1
2
3
Set up your digital presenter properly.
(See page 15.)
Connect the presenter to a PC monitor or projector to display the image.
(See page 15.)
Turn the power of the output device and the digital presenter on.
POW
INT
ER
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
E
+
-
3
5
7
AW
4
BLU
2
4
-
Place the object on the document plate, and adjust the head to
face the object.
If there is no image on the PC monitor or the projector, check if the cable is properly
connected and press the INT/EXT button of the presenter to select the input mode to INT OUT.
Page
20
5
English
Using the presenter
POW
ER
German
INT
French
Select a proper lighting source with the LAMP button of the presenter. Each time you press the button,
upper lamps on, lightbox on, then all lightings off.
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
BLU
E
2
4
+
-
3
5
7
AW
-
Upper lamps. Use the upper lamps to project paper
documents and other materials, and use lightbox
lamp to project transparencies.
Lightbox.
• It wil take two minutes to project on the optimum brightness after turning on presenter.
And then you can execute AWC button to adjust the color status.
Remove or attach the adapter lens according to the object.
Italian
6
Rotate the lens to
remove or attach it.
Spanish
• Remove the adaptor lens in the camera mode.
(possible focal length: 1m ~ ∞)
• Attach the adaptor lens to view a material or a
document or a film placed on the document plate.
(possible focal length: 240mm ~ 365mm)
• Beyond the possible focal length mentioned above, it
might be out of focus. So pay attention to the
distance between the object and the lens.
Page
21
SDP-900DXA
Using the presenter
7
Focus on the object.
• Auto focus control: Press AF button.
• Manual focus control: press [Focus F] or [Focus N] to adjust manually.
INT
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
E
+
-
3
5
7
AW
C
Neg
BLU
2
4
6
8
3X3
a/Po
si
FRE
EZE
IBR
WID
E
8
ROT
ATE
IGH
T
You see the image on the PC monitor or the projector or DVI supporting devices
(monitor or projector)
• To use versatile image control features, see pages 23 through 27.
To change the object projected during presentation, freeze the image on the screen by using
FREEZE button of the presenter and change it.
To release the FREEZE mode, press FREEZE button again or EXIT button on the remote controller.
F
RED
1
+
N
AF
si
FRE
EZE
E
T+
BR
NTS
Page
22
IGH
C/PA
ROT
ATE
IGH
IT
T-
L
6
8
3X3
BR
EX
3
5
7
a/Po
WID
E
+
AW
C
Neg
BLU
2
4
TEL
E
English
Adjusting your image
Use the control buttons on the remote controller or on the control panel of the presenter to adjust the projected
image. Some of the main features are described below:
French
Adjusting image size
You can also use ZOOM
or ZOOM
German
Press WIDE or TELE button on the remote controller to change the image size displayed on the screen.
button of the presenter to achieve the same result.
Neg
3X3
a/Po
si
FRE
EZE
IGH
E
T+
EX
BR
IT
NTS
IGH
C/PA
TEL
T-
E
L
PR
ES
SAV
E
ROT
ATE
BR
WID
RE
CA
ET
SAV
LL
E
Adjusting brightness
button on the control panel or IRIS + button on the remote controller to lighten the overall image.
Press IRIS
button on the control panel or IRIS - button on the remote controller to darken the overall image.
Spanish
Neg
Italian
Press IRIS
3X3
a/Po
si
FRE
EZE
IGH
E
T+
EX
BR
IT
NTS
IGH
C/PA
TEL
T-
E
L
PR
ES
SAV
E
ROT
ATE
BR
WID
RE
CA
LL
ET
SAV
E
Page
23
SDP-900DXA
Adjusting your image
Adjusting image color
For automatic color adjustment, press AWC button.
If you want fine level adjustment, press BLUE + / - or RED + / - button on the remote controller to increase or
decrease blue or red color factor manually.
INT
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
E
+
-
3
5
7
AW
C
Neg
BLU
2
4
6
8
3X3
a/Po
si
FRE
EZE
IGH
E
BL
U
II E9
II 0
II
II
ROT
ATE
BR
WID
T+
Hint:
To obtain the best result, put the camera lens facing
the white paper and press AWC button.
The color level will
be displayed.
Positive and negative switching
+
N
+
-
3
5
7
AW
C
Neg
E
2
4
AF
BLU
6
8
3X3
a/Po
Press NEGA/POSI button.
Each time you press the button, POSI or
NEGA appears alternately on the screen.
Set to POSI to see normal object and set
to NEGA to see negative film.
si
FRE
EZE
IGH
E
T+
EX
BR
IT
NTS
IGH
C/PA
TEL
T-
E
L
PR
SAV
E
ROT
ATE
BR
WID
ES
ET
Image sharpness control
Press TXT/IMG button to control the sharpness of the output image of this product.
- TXT Mode: For a material mostly with words.
- IMG Mode: For a material with many pictures or colors.
POW
INT
ER
/EX
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
24
E
+
-
3
5
7
A
Page
BLU
2
4
-
English
Adjusting your image
Image rotate control
F
5
7
AW
C
RO
TA
TE
-
90
˚
6
8
German
Neg
French
For image rotation, press ROTATE button.
To rotate the image by 90˚, 180˚, 270˚, 0˚, press ROTATE button.
3X3
a/Po
si
FRE
EZE
IGH
E
T+
BR
NTS
IGH
C/PA
ROT
ATE
BR
WID
T-
TEL
The rotate image status
will be displayed.
E
L
PR
NTSC/PAL switching
Switches Video output mode to NTSC or PAL.
IGH
E
T+
EX
BR
IT
NTS
IGH
C/PA
TEL
T-
E
L
PR
ES
SAV
E
ROT
ATE
BR
WID
RE
CA
ET
SAV
LL
E
DIV
IDE
AC
T
IVE
SH
I
Saving image in memory
You can save the image up to 8 frames into your digital presenter's memory. After saving, you will be able to
recall it.
T
TXT
/IMG
FOC
US
LAM
P
F
RED
1
+
N
AF
FRE
EZE
T+
BR
IGH
C/PA
PR
E
RE
CA
SAV
LL
DIV
TEL
T-
E
L
IDE
ES
ET
E
AC
T
SH
IFT
IVE
If you want to recall the saved image from
memory, press RECALL button and press the
memory location number within 4 seconds. If you
press and hold down RECALL button, all images
saved in memory are displayed one by one.
If you want to exit from the recall mode, press
EXIT button.
The memory location numbers are printed on the right
side of these buttons. For example, if you want to
save the image into memory location 7, press SAVE
then press AF button printed 7 at right side.
• If you turn the power off, all the saved images will be lost.
• The image is not saved in the Rotate or Freeze status.
• Digital zoom picture is not saved, therefore when you press SAVE button under
digital zoom mode, the digital presenter automatically returns to the maximum optical
zoom state.
Page
25
Spanish
SAV
ROT
ATE
IGH
E
NTS
6
Italian
si
BR
IT
-
8
a/Po
EX
3
5
7
3X3
WID
+
AW
C
Neg
BLU
E
2
4
To save the image into the memory, press SAVE
button and specify the memory location within 4
seconds using the number keys from 1 through 8.
SDP-900DXA
Adjusting your image
Screen 2 divide and image shift
You can see both the image of an object currently projected and the image saved in memory simultaneously on
one screen.
MG
Press DIVIDE button and press the memory location
FOC
US
LAM
RED
1
+
N
E
+
-
3
5
7
AW
C
Neg
BLU
2
4
AF
number within 4 seconds to recall the image you want
to see.
To cancel this mode and return to normal mode, press
EXIT button.
The digital zoom is not available in DIVIDE mode,
therefore when you select DIVIDE mode under digital
zoom mode, the digital presenter automatically returns
the right live picture to the maximum optical zoom state.
P
F
6
8
3X3
a/Po
si
FRE
EZE
EX
BR
IGH
T-
IT
NTS
C/PA
L
TEL
E
PR
You can see the
image of an object
currently projected
at right side.
ES
SAV
E
ROT
ATE
BR
IGH
T+
WID
E
RE
CA
ET
SAV
LL
E
DIV
AC
T
IDE
IVE
SH
IFT
DIG
ITA
LP
R
The recalled image from memory appears
at left side. Press SHIFT button to shift the
image from right to left. Each time you
press the button, a third of the image will
be moved from right to left.
3x3 Multi-Screen
You can see all the images saved in memory simultaneously on one screen and choose one to display it.
MG
FOC
US
P
RED
1
+
N
AF
E
+
-
To cancel this mode and return to normal mode,
press EXIT button.
3
5
7
AW
C
Neg
BLU
2
4
Press 3x3 button for 2 seconds or more, then all
the images saved in memory are displayed on the
screen.
LAM
F
6
8
3X3
a/Po
si
FRE
EZE
EX
IT
NTS
C/PA
L
BR
IGH
T-
1
2
3
4
3X3 Divide Mode
5
6
7
8
1
2
3
4
3X3 Divide Mode
5
6
7
8
TEL
E
PR
ES
SAV
E
ROT
ATE
BR
IGH
T+
WID
E
RE
CA
ET
SAV
LL
E
DIV
IDE
AC
T
IVE
SH
IFT
DIG
ITA
L
When you want to see one of them, press the
number button to recall it.
For example, if you want to see the image in
memory location 3, press BLUE + button and
the image is displayed on the screen.
Page
26
3
English
Adjusting your image
Saving custom user setting
/IMG
FOC
US
LAM
P
F
RED
1
+
N
+
-
3
5
7
AW
C
Neg
E
2
4
AF
BLU
-
To save the current value, press SAVE button
and specify the memory location within 4 seconds
using the number keys from 1 through 4.
To recall your custom setting, press the ACTIVE
button and press the memory location number
within 4 seconds.
German
TXT
French
After you adjust feature value, you can save the value for next time use. You can save up to 4 different custom
user settings. (You can save the setting on the Zoom, Focus, Iris, Lamp state and Color level buttons.)
6
8
3X3
a/Po
si
FRE
EZE
WID
BR
E
EX
IT
BR
NTS
SAV
E
C/PA
IGH
IGH
T-
L
PR
ES
ET
RE
CA
LL
SAV
E
DIV
IDE
ROT
ATE
T+
TEL
E
The memory location numbers are printed on the
right side of these buttons, For example, if you want
to save the feature into memory location 4, press
SAVE then press FOCUS N button printed 4 at right
side.
AC
TIV
E
SH
IFT
DIG
ITA
You can not save the setting on the FREEZE, RECALL, DIVIDE, SHIFT and ROTATE
functions.
Italian
Spanish
Page
27
SDP-900DXA
Adjusting your image with GUI
The SDP-900DXA supports GUI menu system to control various function of digital presenter with mouse
operation.
To use GUI menu system, first of all, mouse device (PS/2 type) must be connected to mouse control terminal, if
it is connected with success, mouse pointer will be appeared on the screen.
And then, click the right mouse button, GUI main menu is appeared on the screen, and GUI menu system is
activated.
When [Exit] menu is clicked, GUI main menu disappears and only the mouse pointer remains displayed.
Mouse device Connection
Mouse pointer appearance
Main GUI menu appearance
Right button Click
Mouse move and left button click
[Exit] Menu Click
Function execution
Main GUI menu disappearance
Menu and Functions
1
Image section
Image menu deals with various adjustment functions of on-screen image.
Page
28
English
Adjusting your image with GUI
Focus
French
Allow to focus an object in the far / near distance, or automatically.
When holding down [Far]/[Near] menu with the left mouse button, focus is activated.
Click [Auto] menu to work auto focus function.
German
Zoom
Allow to change the image size.
When holding down [Tele]/[Wide] menu with the left mouse button, zoom is activated.
Italian
Bright
Allow to change IRIS to increase or decrease the brightness.
When holding down [Up]/[Down] menu with the left mouse button, lens iris is activated.
Spanish
Page
29
SDP-900DXA
Adjusting your image with GUI
Red / Blue
Allow to adjust image color through the red/blue gain control
When holding down [Up]/[Down] menu with the left mouse button, red/blue gain control is activated.
AWC
Allow to adjust image color automatically through automatic white balance control
When you click [AWC] menu with the left mouse button, AWC function is executed once.
Page
30
2
English
Adjusting your image with GUI
Digital section
French
Digital menu deals with various digital image processing functions.
German
Freeze
Allow to keep the current image on the screen. Click[Freeze] menu with the left mouse button, freeze mode is
activated and [Freeze] menu turns checked state. To release freeze mode, click [freeze] menu again or click
[Cancel] menu with the left mouse button (and then [Freeze] menu turns unchecked state).
Italian
Rotate
Page
Spanish
Allow to rotate the image by 0˚(Off), 90°, 180°, 270°. Click [0°/90°/180°/270°] menu with the left mouse button,
image is rotated by user’s request and menu turns checked state following current status of image.
31
SDP-900DXA
Adjusting your image with GUI
Save / Recall
Allow to save the projected image into the memory of digital presenter or recall the image from the memory.
To save / recall the image with the proper save number, Click [numbers] menu with the left mouse button,
current image is saved into or recalled from memory.
Page
32
English
Adjusting your image with GUI
Divide
French
Allow to divide the screen to show both of the current image and the image recalled from the memory
simultaneously on one screen.
Click [numbers] menu with the left mouse button, screen is divided and selected number of the image is
recalled from memory.
German
Shift
Allow to shift the recalled image shown in the divided screen to show the hidden portion of the image.
Click[Shift] menu with the left mouse button, image is shifted from right to left step by step on each request in
the divide mode.
Italian
Spanish
Page
33
SDP-900DXA
Adjusting your image with GUI
3x3 Multi
Allow to see all the images in the memory (up to 8 frames) on one screen.
Click [3x3 Multi] menu with the left mouse button, 9 divide mode is activated and
GUI menu disappeared. If you click the image number on screen, selected image will be expanded to full
screen and GUI menu is appeared on the screen.
To Release 3x3 Multi mode, click the center image.
Cancel
Allow to stop the current function and return to normal mode.
Click [Cancel] menu with the left mouse button, all digital function is released.
Page
34
Miscellaneous section
French
3
English
Adjusting your image with GUI
Misc menu deals with miscellaneous function of digital presenter.
German
Preset Save / Exe
Allow to save the customized user setting values or to activate the preset user setting.
Click [numbers] menu with the left mouse button, current setting value is saved to flash ROM or load setting
value from flash ROM.
Italian
Spanish
Page
35
SDP-900DXA
Adjusting your image with GUI
NEGA Effect
Allow to switch for negative / positive image (default : positive). Click [NEGA Effect] menu with the left mouse
button, current image turns negative image and menu turns checked state. To return positive image, click
[NEGA Effect] menu again (and then menu turns unchecked state).
Aperture
Allow to control the sharpness of the output image (default : On). Click [Aperture] menu with the left mouse
button to turn on/off aperture mode. (Image mode / Text mode)
Video Out
Allow to switches video output mode to NTSC or PAL.
Click [NTSC/PAL] menu with the left mouse button, video mode is switched to current value.
Page
36
English
Adjusting your image with GUI
Lamp
French
Allow to turn the upper lamps or lightbox on or off.
Click [All off/Upper/Lower] menu with the left mouse button, lamp mode is switched to current value.
German
4
Exit section
GUI main menu disappears and only the mouse pointer remains displayed.
Tips : Drag and Drop Function
Italian
GUI main menu can take any position of screen using Drag and Drop.
First of all, click the moving point of main menu, and then drag and drop to any position of screen where you
want.
1. Click the moving point image
Spanish
2. Drag the GUI main menu
3. Drop the GUI menu
Page
37
SDP-900DXA
Changing your image with Draw
SDP-900DXA supports to GUI Drawing system to draw straight lines, freehand lines, rectangular on the screen
with mouse operation.
To use GUI Drawing system, first of all, GUI menu system and [Freeze] or [Recall] function must be activated.
Then Draw menu is now being activated. (See page 28)
When [Draw] menu is clicked, GUI Draw toolbar is appeared on the screen and GUI main menu disappeared.
GUI menu Activated
[Freeze] or [Recall]
Function activated
[Draw] Menu Click
[Draw] Menu Activated
GUI Draw Toolbar appearance
Draw Function Execution
Draw toolbar disappeared.
GUI menu appearance
button Click
[1] Exit Button
[5] Line Width Selection
[2] Tool Selection
[3] Foreground / Background Color Panel
[4] Foreground / Background Color Palette
Page
38
1
Exit Button
French
Use the Exit button (
full screen.
) to exit GUI Drawing system to normal mode, or clear all the user’s images on the
German
2
English
Changing your image with Draw
Tool Selection
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Drawing the single line
To draw a single line, Click the single line icon and then,
1) Position the cursor on the screen where you want the line to start.
2) Press and hold the left/right mouse button.
3) Drag the mouse.
4) To end the line, release the mouse button. SDP-900DXA creates the line.
Drawing the rectangular
To create a rectangular, Click the rectangular icon and then,
1) Place the cursor at a corner of the area you want to select.
2) Click and drag the mouse until the selection is the size you want.
3) Release the mouse button.
Italian
Drawing the freehand line
Spanish
To create a freehand line, Click the freehand line icon and then,
1) Position the cursor on the image where you want the line to begin.
2) Press and hold the left/right mouse button.
3) Drag the mouse on the path you want the line to take.
4) Release the mouse button.
Eraser Tool
1) Click the Eraser tool icon and then the cursor changes to the erasing rectangular.
2) Move the cursor over the line and click to delete the line.
Page
39
SDP-900DXA
Changing your image with Draw
3
Foreground / Background Color Panel
There are two active colors in GUI Drawing System, the foreground (left mouse click) and
background(right mouse click) colors.
You can change the brush colors by selecting new foreground and background solid colors using the Color
Palette.
4
Foreground / Background Color Palette
Use the Color Palette to select the colors that you want to draw the line.
Move the cursor over the available colors panel. Click left button to select a foreground color, click right
button to select a background color. The two boxes above the Color Panel display the respective colors.
There are six colors to be selected, red, yellow, green, cyan, blue and magenta.
5
Line Width Selection
Use the Line Width Selection to set the line width to between 1 and 4 pixels.
Page
40
2
Attach the lens cap.
4
While you pull the main lock button
toward the front of the presenter,
fold the head completely.
German
3
Turn the head upside down.
French
1
Turn the power off and unplug the
power cord.
English
Storage
Italian
Spanish
Page
41
SDP-900DXA
15
Page
42
Fold the lamps on both sides completely.
English
Trouble shooting
No image appears
French
German
- Check if the resolution of the output device corresponds to that of the digital presenter.
(For example, when the maximum resolution of a projector is SVGA and if the digital
presenter is set to XGA, then no image appears.)
- Check if the input selection of the output device is appropriate.
- Check if the iris control is adequate.
- Check if the VGA cable is connected to the VGA output terminal correctly.
- Check if the lens cap is removed.
No communication between the PC and USB.
- Make sure the operating system is Windows 98 or later. It doesn't work on Windows 95.
- For other detailed information, please refer to the program manual supplied with the product.
No image from a slide film or a negative film.
- Check if the light box is turned on.
- Adjust the lens to face the film directly.
- Check if the NEGA/POSI button is selected properly.
remote controller is not working.
- Check the battery of the remote controller.
Replace it with a new one.
Italian
The image is out of focus.
Spanish
- Check if the adaptor lens is attached properly for the purpose. (See page 21.)
- Check if the distance from the object is too short.
When you use GUI, the
mouse is not seen or does
not work normally.
If there are problems,
please contact the store
you purchased the
product or our distributor
nearest you.
- Check the contact condition of mouse
port and make sure it's mouse offered by
Samsung Techwin.
(It may not work if it's not mouse offered by Samsung Techwin.)
Page
43
SDP-900DXA
Battery replacement
Open the battery compartment lid
at the back of the remote controller.
Insert new batteries.
• Battery type:AAA type 1.5V
Close the lid.
Caution
Page
44
Random replacement of built-in battery by other types of batteries may cause explosion.
Thus, the battery shall be replaced by the same battery. And the used batteries shall be
disposed carefully because they can cause environment pollutions.
English
Specifications
Note: Specifications are subject to change without notice.
Video
White Balance
Negative / Positive
Freeze
Input terminals
Output terminals
General
Dimensions(mm)
Weight
Accessories
20 frame/sec
Internal sync.
1024 x 768(XGA) RGB color, 800 x 600(SVGA) RGB color.
C-Video VBS 1.0Vp-p / 75Ω (unbalance)
S-Video Y: 1.0Vp-p / 75Ω (unbalance)
C: 0.286Vp-p / 75Ω (unbalance)
Manual / Auto (one touch type)
Selectable
built-in
VGA:2
VIDEO:1, VGA:2, USB:1,
DVI:1, RS-232C:1, S-Video:1
Selectable
Supplied
Supplied
3 channels (Internal: 1, External: 2)
Available
Available
Available (8 frames)
Available (8 frames)
Available (2divide of 9 divide)
Available (90˚, 180˚, 270˚)
Available (USB: QUAR, HALF, FULL, SCREEN FULL)
Up to 4 user settings
built-in
SET control
Viewer (for Windows 98, 98SE, ME, 2000 Professional,
XP), TWAIN Driver (for windows), AVI Capture for Windows
Mac Program(Mac OS 10.2)
Spanish
Operating temperature/
Humidity
Power
1/3" 850,000 pixels PS CCD / 1034(H) x 779(V)
Italian
PC connection
NTSC / PAL
Remote controller
GUI(Graphic User Interface)
Input selection
On-screen display
Image freeze
Image save
Image recall
Image divide
Image rotation
Image transfer to computer
Preset function
USB
RS-232C
Application software
Description
F=1.5(Wide)~2.1(Tele) f=5.2~66.5, 12x power zoom
Max: 299 x 224mm ,Min: 21 x 16mm
Powered (12x), Digital (3X)
Powered (Auto Focus / Manual)
Auto (with fine level adjustment)
Attached to the side arm of the main unit
Light box (built-in main unit)
German
Video output
French
Specifications
Lens
Shooting Area
Optical system
Zoom
Focus
Iris
Upper
Illumination system
Lower
Pick-up Device/
Effective pixel
Frame rate
Sync system
VGA output
+5˚C ~ +35˚C, 30% ~ 90%
DC12V (Adaptor INPUT: AC100V~240V Free Voltage,
50/60Hz, OUTPUT: 12V, 4.0A)
In-use: 760(W) x 573(H) x 558(D)
Storage: 562(W) x 165(H) x 573(D)
10kg
Remote controller, Cables, etc.
Page
45
SDP-900DXA
Memo
Page
46