Samsung HG32EA590** Installation manual

670/673/675
LED TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model
[HB670-XC]Install Guide-ENG.indd 1
Serial No.
2013-02-04 �� 3:10:41
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice.
Instruction
This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled
system for hotels and other hospitality businesses.
Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB; if identified, theTV switches to ONLINE mode and full
control is through the SBB/STB.
If the TV is in ONLINE mode, it stops receiving IR(Samsung remote) commands and acts according to interface protocol.
Stand-Alone: If SBB/STB is not identified, the TV should be switched to STAND-ALONE mode with restricted operation.
Operational Modes
When this TV (in Hotel mode) is operated with a SBB/STB, it is in one of two states
• ONLINE or STAND-ALONE. In the STAND-ALONE state, the TV will act as a Hotel TV, but without active communication. This is to prevent guests
from trying to cheat the system by disconnecting the SBB/STB.
Hotel TV
Hotel Mode On
SBB/STB Online if one
success within 10 attempts
Stand-alone
Mode
SBB/STB Online-10
consecutive fails
Power
ON
SBB/STB StatusAttempt every
2secs
Online Mode
Poll Rate 20/sec
To set the details for Stand-alone or interactive mode, refer to pages 19-24(Setting the hotel option data : Stand-alone mode and Interactive mode)
• Some operations may be restricted to prevents guests from "cheating" the TV system.
• No main menu(Interactive mode) or Channel Menu, Plug & Play in Main Menu(Stand-Alone mode)
• Limited Volume and Panel key lock or unlock
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV Program logo, panorama or 4:3 image format, stock or news bar at screen
bottom etc.) on the screen. Constant displaying of still picture can cause uneven wear of screen phosphor, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try do display any image on full screen, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
xx If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
Installation with a stand.
Installation with a wall-mount.
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
[HB670-XC]Install Guide-ENG.indd 2
2013-02-04 �� 3:10:41
Contents
ENGLISH
yy Accessories............................................................................................................................................................... 4
yy Installing the LED TV Stand........................................................................................................................................ 4
yy Assembling the swivel (32 inch TVs or larger)............................................................................................................. 6
yy Viewing the Connection Panel.................................................................................................................................... 7
yy Using the TV’s Controller (Panel Key)........................................................................................................................ 10
yy Viewing the Remote Control..................................................................................................................................... 11
yy Connecting the TV with SBB.................................................................................................................................... 12
yy Connecting the Bathroom Speakers........................................................................................................................ 14
yy Connecting the MediaHub HD................................................................................................................................. 16
yy Connecting the RJP (Remote Jack Pack)................................................................................................................. 17
yy Setting the Hotel Option Data.................................................................................................................................. 19
yy Installing the Wall Mount.......................................................................................................................................... 55
yy Securing the TV to the Wall...................................................................................................................................... 56
yy Anti-theft Kensington Lock....................................................................................................................................... 56
yy Specifications.......................................................................................................................................................... 57
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle them
responsibly to promote the sustainable reuse of material resources. Household users should contact either
the retailer where they purchased this product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling. Business users should contact their
supplier and check the terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems)
This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment. To protect natural resources and to promote material reuse, please
separate batteries from other types of waste and recycle them through your local, free battery return
system.
English
[HB670-XC]Install Guide-ENG.indd 3
3
2013-02-04 �� 3:10:42
Accessories
✎✎Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎✎The items’ colour and shapes may vary depending on the models.
yy Remote Control & Batteries (AAA x 2)
yy Quick Set up Guide
yy Safety Guide (Not available in all locations)
yy Power Cord / Data Cable
yy RF Signal Gender (DIN,F Type)
✎✎The stand and stand screw may not be included depending on the model.
✎✎The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60
degrees left and right, or 90 degrees left and right. See page 6. The 28” LED TVs do not have swivel stands.
Stand Components
When installing the stand, use the provided components and parts.
A
B
1 EA
C
1 EA
D
(M4 X L12)
28~32inch : x7 (M4 X L12)
39~46inch : x8 (M4 X L12)
yy Stand
(depending on the model)
yy Guide Stand
yy Screws
yy Bolt + Nut (32 inch only)
Top
32 inch only
Bottom
4
]] WARNING: To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the installation
instruction.
English
[HB670-XC]Install Guide-ENG.indd 4
2013-02-04 �� 3:10:44
1
2
x4
C
Top View
(M4 X L12)
B
Front
A
ATTENTION
Rear
DO NOT USE
DO NOT USE
DO NOT USE
CHEMICALS
GREASE
OIL
✎✎
✎✎
3
4
Side View
28 ~ 32inch
Place a soft cloth over the table to protect the TV, and
then place the TV on the cloth screen side down.
Insert the Stand Guide into the slot of TV bottom side.
(Correct assembly)
(Incorrect assembly)
x3
C
(M4 X L12)
4
39~46inch
x4
C
(M4 X L12)
✎✎Make sure to distinguish between the front and back of the Stand and Stand Guide when assembling them.
✎✎Make sure that at least two people lift and move the TV.
English
[HB670-XC]Install Guide-ENG.indd 5
5
2013-02-04 �� 3:10:46
Assembling the swivel (32 inch TVs or larger)
The TV stand more than 32inch supports the swivel function. The swivel angle support all of 20°, 60° and 90° and you can
change the swivel angle by using BRACKET HOLDER SWIVEL.
¦¦ 20° ~ 60° swivel
If you assemble the wedge on the bottom of the stand to the hole of BRACKET HOLDER SWIVEL where 20° or 60° is marked,
the swivel angle becomes each 20° ~ 60° in the left and right side.
20°
60°
20°
60°
¦¦ 90° swivel
If you assemble only screws after you remove BRACKET HOLDER SWIVEL, the swivel angle becomes each 90° in the left and
right side.
6
English
[HB670-XC]Install Guide-ENG.indd 6
2013-02-04 �� 3:10:48
Viewing the Connection Panel
Power Input
$
@
#
COMPONENT
/ AV IN
!
HDMI IN 1
!
DATA
COMPONENT
/ AV IN
!
2
3
HOSPITALITY TV
HDMI IN 2
(DVI)
HDMI IN 3
(ARC)
HDMI IN 1
0
USB
(5V 0.5A)
/ CLONING
%
PC IN
PC IN
0
HDMI IN 2
(DVI)
VIDEO
VIDEO
CLOCK
1
USB
(5V 0.5A)
/ CLONING
9
DIGITAL
AUDIO OUT
PC / DVI
(OPTICAL) AUDIO
IN
DATA
HDMI IN 3
(ARC)
DIGITAL
AUDIO OUT
PC / DVI
(OPTICAL) AUDIO
IN
HOSPITALITY TV
!
$
#
1
HDMI IN 2
(DVI)
!
HDMI IN 1
!
USB
(5V 0.5A)
/ CLONING
%
ANT IN
AIR/CABLE
^
2
3
9
4
SATELLITE
8
RJP
5
ANT IN
AIR/CABLE
^
[HB670]
AIR/CABLE
[HB675]
[HB670/675]
7
VARIABLE
AUDIO OUT VOL-CTRL
6
HP-ID
ANT IN
AUDIO
7
VARIABLE
AUDIO OUT VOL-CTRL
RJP
AUDIO
8
EXT (RGB)
HP-ID
4
5
6
[HB673]
✎✎Whenever you connect an external device to your TV, make sure that power on the unit is turned off.
✎✎When connecting an external device, match the color of the connection terminal to the cable.
1 DIGITAL AUDIO OUT (OPTICAL): Connects to a Digital Audio component.
2 PC/DVI AUDIO IN: Connect to the audio output jack on your PC.
3 PC IN: Connect to the video output jack on your PC.
4 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
Variable port.
5 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL
port.
6 COMPONENT / AV IN
–– Connects Component video / audio.
–– Connect component video cables (optional) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the
other ends to corresponding component video out jacks on the DVD.
–– If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD and connect
the DVD to the component jacks ("PR", "PB", "Y") on your TV.
–– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
–– Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of the TV set and the other ends to corresponding
audio out jacks on the DVD.
English
[HB670-XC]Install Guide-ENG.indd 7
7
2013-02-04 �� 3:10:49
7 EXT (RGB)
Input
Connector
Output
Video
Audio (L/R)
RGB
Video + Audio (L/R)
0
0
0
Only TV or DTV output is available
EXT
✎✎Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
8 RJP: This port is an RJP (Remote Jack Pack) communication port that enables connecting different devices to additional
module so as to improve device use convenience.
9 HP-ID: Connect the cable to HP-ID and Headphone Jack simultaneously and connect it to separated Headphone Box.
See page 15. When connecting Headphone to Headphone Box, it works same as Headphone function.
0 HEADPHONE JACK
–– Headphones may be connected to the headphone jack on your TV. While the headphones are connected, the sound
from the built-in speakers will be disabled.
! HDMI IN 1, 2 (DVI), 3 (ARC): Connects to the HDMI jack of a device with an HDMI output.
✎✎ No sound connection is needed for an HDMI to HDMI connection.
✎✎ Use the HDMI IN 2 (DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for video connection and the PC/DVI AUDIO IN jacks for audio.
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. The supported resolution may differ depending on the model.
✎✎Optimal resolution is 1366 X 768 @ 60Hz. (HD Model)
8
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
720 x 400
31,469
70,087
28,322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35,000
49,726
68.681
66,667
74,551
75.062
30,240
57,284
100.000
-/-/-/-
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 720
1280 x 800
1280 x 1024
1280 x 1024
1366 x 768
31,469
37.861
37.500
37,879
48,077
46.875
48,363
56,476
60,023
67.500
45,000
49.702
63.981
79.976
47,712
59,940
72,809
75.000
60,317
72,188
75.000
60,004
70,069
75,029
75.000
60,000
59.810
60.020
75.025
59.790
25,175
31,500
31,500
40,000
50,000
49.500
65,000
75,000
78,750
108.000
74,250
83.500
108.000
135.000
85.500
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
-/+
+/+
+/+
+/+
English
[HB670-XC]Install Guide-ENG.indd 8
2013-02-04 �� 3:10:51
✎✎Optimal resolution is 1920 X 1080 @ 60 Hz. (FHD Model)
Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Pixel Clock Frequency
(MHz)
Sync Polarity
(H / V)
IBM
720 x 400
31,469
70,087
28,322
-/+
MAC
640 x 480
832 x 624
1152 x 870
35,000
49,726
68,681
66,667
74,551
75,062
30,240
57,284
100,000
-/-/-/-
VESA CVT
720 x 576
1152 x 864
1280 x 720
1280 x 960
35,910
53,783
56,456
75,231
59,950
59,959
74,777
74,857
32,750
81,750
95,750
130,000
-/+
-/+
-/+
-/+
VESA DMT
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 720
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
31,469
37,861
37,500
37,879
48,077
46,875
48,363
56,476
60,023
67,500
63,981
79,976
45,000
49,702
62,795
60,000
47,712
55,935
70,635
65,290
59,940
72,809
75,000
60,317
72,188
75,000
60,004
70,069
75,029
75,000
60,020
75,025
60,000
59,810
74,934
60,000
60,015
59,887
74,984
59,954
25,175
31,500
31,500
40,000
50,000
49,500
65,000
75,000
78,750
108,000
108,000
135,000
74,250
83,500
106,500
108,000
85,500
106,500
136,750
146,250
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
VESA GTF
1280 x 720
1280 x 1024
52,500
74,620
70,000
70,000
89,040
128,943
-/+
-/-
VESA DMT /
DTV CEA
1920 x 1080p
67,500
60,000
148,500
+/+
✎✎When using an HDMI/DVI cable connection, you must use the HDMI IN 2 (DVI) jack.
✎✎The interlace mode is not supported.
✎✎The set might operate abnormally if a non-standard video format is selected.
✎✎Separate and Composite modes are supported. SOG is not supported.
@ CLOCK: Set the time after connecting the cable of External Clock to Clock jack. You can use the External Clock Display
function.
# DATA
–– Used to support data communication between the TV and the SBB.
–– The TV jack type is RJ-12.
$ COMMON INTERFACE
% USB / CLONING
–– Connector for software upgrades and Media Play, etc.
–– Service connection.
^ ANT IN: To view television channels correctly, a signal must be received by the set from one of the following sources. An
outdoor antenna / A cable television network / A satellite network.
✎✎ For Norway & For Sweden: Equipment which is connected to protective earth through a network plug and/or
through other equipment connected to earth, and connected to a cable network, may cause risk of fire. To prevent
this from happening, a galvanic isolator is also installed between the equipment and the cable network when
connecting the equipment to the cable network.
English
[HB670-XC]Install Guide-ENG.indd 9
9
2013-02-04 �� 3:10:53
Using the TV's Controller
The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote
control.
Selecting the Media Play
Selecting the Menu
Selecting a Source
Function menu
Return
Remote control sensor
TV Controller
The image is drawn by
facing the front side of
the TV.
Power off
✎✎The product color and shape may vary depending on the model.
✎✎Exits the menu when pressing the controller more than 1 second.
✎✎When selecting the function by moving the controller to the up/down/left/ right directions, be sure not to press the controller. If you
press it first, you cannot operate it to move the up/down/left/right directions.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe
and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on
vacation, for example). It is best to unplug the power cord.
10
English
[HB670-XC]Install Guide-ENG.indd 10
2013-02-04 �� 3:10:53
Viewing the Remote Control
✎✎This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and
Volume buttons.
Display and select the available video
sources.
Turns the TV on and off.
Have direct access to channels.
Alternately selects Teletext, Double or Mix.
GUIDE
Electronic Programme Guide (EPG) display.
Cut off the sound temporarily.
Adjust the volume.
Change channels.
Display channel list on the screen.
Switch to the HOME screen.
Display the main on-screen menu.
HOME
CONTENT
CLOCK
Quickly select frequently used functions.
Select on-screen menu items and change
menu values.
Press to display information on the TV
screen.
CLOCK: When you press INFO key in
standby mode, TV screen will display the
time.
Exit the menu.
Return to the previous menu.
Buttons in the Channel list, Contents
Home menu, etc.
Enter the hour your want the TV to turn on.
View the Contents Home.
A
ALARM
B
C
SUBT.
Use these buttons in the Contents Home.
D
ALARM: Enter the hour you want the TV
to turn on.
: Turns the 3D image on or off.
(Not available)
SUBT.: Displays digital subtitles.
Installing batteries (Battery size: AAA)
✎✎NOTE
xx Use the remote control within 23 feet from the TV.
xx Bright light may affect the performance of the remote
control. Avoid using nearby special fluorescent light or neon
signs.
xx The colour and shape may vary depending on the model.
xx Remocon button 'HOME' & '3D' is not supported. When
press those button, TV unit do not give ANY respond.
English
[HB670-XC]Install Guide-ENG.indd 11
11
2013-02-04 �� 3:10:54
Connecting the TV with SBB
TV Rear Panel
ETH MODEM
Data Cable
HOSPITALITY TV
DATA
COMPONENT
/ AV IN
HDMI IN 3
(ARC)
CLOCK
Hotel Server
STB(Set Top Box) or
SBB(Set Back Box)
1.Connect the DATA jack of the TV to the [ETH MODEM] jack of the STB(SBB) with the Data cable.
✎✎ Use data communication.
12
English
[HB670-XC]Install Guide-ENG.indd 12
2013-02-04 �� 3:10:55
¦¦ List of Vendors and Compatible Data Cables Supplied with the TV
yy Confirm you are using the correct data cable for your vendor. Refer to the code label on the data cables.
English
[HB670-XC]Install Guide-ENG.indd 13
13
2013-02-04 �� 3:10:55
Connecting the Bathroom Speakers
You can connect the Bathroom Speakers in the following method.
¦¦ Connecting through the Variable Output (available without an external amplifier)
TV Rear Panel
1
AUDIO
VARIABLE
AUDIO OUT VOL-CTRL
Speaker
2
VOL+
VOL-
Volume Control Box
1.Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel.
Speaker +
Speaker -
N/C
2.Connect the VOL-CTRL jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
✎✎ The maximum speaker output is 4W, 8Ω.
yy Installing the Volume Control
–– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom speakers.
–– The jack that is connected from the Volume Control Box to the TV is a 3.5mm normal Phone jack.
–– Volume Control Box switch consists of Tact switch.
Setting the Sub AMP Mode
✎✎
–– 0: Turns the Sub AMP function off (PWM off).
–– 1: Determines the Sub volume according to the main volume control. That is, the sub volume is determined according
to the Power On Volume, the Min Volume, and the Max Volume values of the Hotel Mode.
–– 2: Determines the volume according to the bathroom control panel setting.
yy Variable Output Port Specifications
–– Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
Volume Control Box
VOL +
1
3
2
VOL -
GND
VOL - UP
VOL - DOWN
( White 1 ) ( Black /Red 2 ) ( Shield Wire 3 )
14
English
[HB670-XC]Install Guide-ENG.indd 14
2013-02-04 �� 3:10:56
¦¦ HP-ID
An additionally created Headphone Box can be installed on a bed or business desk so that users can use it conveniently. The
installation procedures are given below.
yy Detailed Drawing of the Headphone Box.
TV Rear Panel
HEADPHON BOX
EXT
HP-ID
Headphone Box
Shield wire
Red Wire (Audio-R)
Red wire + White wire
TV Headphones jack
Whitewire (Audio-L)
Shield Wire
TV HP-ID jack
English
[HB670-XC]Install Guide-ENG.indd 15
15
2013-02-04 �� 3:10:57
Connecting the MediaHub HD
Output of any external source connected to MediaHub HD on hotel desk.
✎✎The color and shape may vary depending on the model.
TV Rear Panel
MediaHub HD Rear
HDMI
DATA
COMPONENT
/ AV IN
HDMI IN 3
(ARC)
VIDEO
CLOCK
DIGITAL
AUDIO OUT
PC / DVI
(OPTICAL) AUDIO
IN
HOSPITALITY TV
PC IN
AUDIO
RJP
VARIABLE
AUDIO OUT VOL-CTRL
HP-ID
USB
RS/232
HDMI IN 2
(DVI)
HDMI IN 1
2 HDMI cable
USB
(5V 0.5A)
/ CLONING
ANT IN
AIR/CABLE
1 RS-232 Data Cable
1.Connect the RJP port of the TV and the RS/232 port of the MediaHub HD.
2.Connect the HDMI IN port of the TV and the HDMI port of the MediaHub HD.
yy MediaHub HD
–– The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HDMI and USB) and
corresponding outputs. The corresponding output sources are connected from MediaHub to TV. The MediaHub
communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests to connect an external
source to the MediaHub. The MediaHub communicates with the TV by sending messages regarding Active/Inactive
sources. The TV will switch to the Active external source.
–– You have to connect the HDMI of the MediaHub to the HDMI IN port of the TV.
–– When the TV is on, connect the TV and the RJP within 10 seconds.
yy Special features
–– PIP
–– Auto Detection
16
English
[HB670-XC]Install Guide-ENG.indd 16
2013-02-04 �� 3:10:57
Connecting the RJP (Remote Jack Pack)
Output of any external source connected to RJP on hotel desk.
✎✎The color and shape may vary depending on the model.
3 Video Cable
TV Rear Panel
USB
HDMI
VIDEO AUDIO AUDIO/PC
RS/232
RJP Rear
DATA
COMPONENT
/ AV IN
HDMI IN 3
(ARC)
CLOCK
VIDEO
4 HDMI cable
DIGITAL
AUDIO OUT
PC / DVI
(OPTICAL) AUDIO
IN
HOSPITALITY TV
PC IN
AUDIO
RJP
VARIABLE
AUDIO OUT VOL-CTRL
HP-ID
HDMI IN 2
(DVI)
4 HDMI cable
HDMI IN 1
USB
(5V 0.5A)
/ CLONING
1 D-sub / PC Audio cable
ANT IN
AIR/CABLE
5
2 Audio Cable
1.Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP.
2.Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the VIDEO port of the RJP.
3.Connect the AV IN [VIDEO] port of the TV to the VIDEO port of the RJP.
4.Connect the HDMI IN port of the TV and the HDMI port of the RJP.
5.Connect the RJP port of the TV and the RS/232 port of the RJP.
✎✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-7660
(HD Plus).
yy RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different Audio
Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are connected
from RJP to TV. The RJP communicates with the TV via RS232. Hot Plug & Play is a function that allows hotel guests
to connect an external source to the RJP. The RJP communicates with the TV by sending messages regarding Active/
Inactive sources. The TV will switch to the Active external source according to the priority set by the User.
You can select HDMI IN and AV IN for connecting RJP.
✎✎
✎✎ When the TV is on, connect the TV and the RJP within 10 seconds.
English
[HB670-XC]Install Guide-ENG.indd 17
17
2013-02-04 �� 3:10:58
yy The RJP can be returned to the factory default settings by pressing the A/V and HDMI buttons simultaneously for 10
seconds. All LEDs blink 5 times to Acknowledge that the rest has been performed.
yy The RJP will automatically turn off any LEDs after 5 minutes to avoid unnecessary light pollution in the hotel room. The
LEDs that were turned off will turn on again if the guest touches any of the buttons and the 5 minute timer will restart. If the
guest then touches another source button, the TV will change to the selected source and the corresponding LED will be lit.
yy After an RJP Reset or a TV Power OFF/ON, it takes approx. 10 seconds to establish communications between the TV and
the RJP.
yy The following table shows the approximate time in seconds to switch from the TV to the input source, based on the
priority.
Scenario 1: When no inputs are connected.
✎✎
Source
To Connect
AV
PC
HDMI
2 Sec
0.7 Sec
3.9 Sec
✎✎ Scenario 2: When two or more inputs are connected and an Input source is disconnected and then reconnected.
Source
Disconnect
To Connect
Total
AV
PC
HDMI
4.5 Sec
0.7 Sec
3.9 Sec
2 Sec
0.7 Sec
3.9 Sec
6.5 Sec
1.4 Sec
7.8 Sec
✎✎ E.g. If the RJP has all its live sources AV, PC and HDMI connected, AV is viewed as the highest priority. If the RJP is
in HDMI mode, and a guest removes and reconnects the AV, the minimum time required to switch to the AV is 6.5
seconds.
yy To connect audio (Ipod or Mp3), Music mode should be ON and Jack Ident detect should be OFF.
yy A/V, PC and HDMI input sources are supported.
18
English
[HB670-XC]Install Guide-ENG.indd 18
2013-02-04 �� 3:10:59
Setting the Hotel Option Data
To Enter: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. (From the Hospitality mode, the Standalone mode is set.)
To Exit from this menu : power off and turn on again.
No Item
Sub item
initial value
Standalone Interactive
Description
Standalone
Select the Hospitality mode.
Standalone /
Interactive
1 Hospitality Mode
2 SI Vendor
Power On
Channel EN
Power On
Channel
3 Power On
Default :
Standalone
***
User Defined /
Last Saved
OFF
Last Saved
Samsung
User
Defined
Select the SI Vendor
TV will turn on to particular Channel.
When the TV is turned on, it switches
automatically to this channel. (Available when
the 'User Defined' is selected in Power On
Channel EN)
This feature determines the type of Power
on Channel Type. (Available when the 'User
ATV
Defined' is selected in Power On Channel EN)
This feature Configures the Power On Volume
of TV
• User Defined: - TV can be configured to
Last Saved Power ON to a user defined/specified Volume.
• Last Saved: - TV will always Turn On to the
last set Volume Level.
When the TV is turned on, it switches
automatically to this volume level.
10
Available when the 'User Defined' is selected
in Power On Volume EN
***
1
1
Channel Type
ATV / DTV
/ CDTV / SDTV
ATV
Power On
Volume EN
User Defined /
Last Saved
Last Saved
Power On
Volume
0~100
10
Min Volume
0~100
0
0
Set minimum Volume Levels
Max Volume
0~100
100
100
Set maximum Volume Levels
Power on
source
TV / HDMI1 /
HDMI2 DVI /
HDMI3 / AV1 /
COMP / PC
TV
TV
Select the Input source when TV is turned on
initially.
Power On
Option
Power On /
Standby / Last
Option
Determines the TV's state when power
returns after a power failure or after you have
unplugged the TV and then plugged it in
Last Option Last Option again.
• Standby: Stand-by State
• Power ON: Power On
• Last Option: Last Power State
English
[HB670-XC]Install Guide-ENG.indd 19
19
2013-02-04 �� 3:11:00
No Item
Sub item
initial value
Standalone Interactive
Channel Setup
***
Channel Editor
***
Channel Bank
Editor
***
(Remark)
n/a
Mixed Channel
Map
On / Off
(Remark)
n/a
Dynamic SI
On / Off
ON
n/a
Channel
Rescan
Message
On / Off
OFF
OFF
Pan Euro
MHEG
On / Off
ON
ON
My channel En
On / Off
OFF
n/a
Genre Editor
***
-
n/a
User can set channel option.
Such as Auto Tunning, Manual Tunning,
Antenna setting.
Provided option for editing Channel Name and
Number and video.
Mute settings for channels in channel List.
Assign the channels that will be included in
the channel bank.
• You can assign a channel number to an
external input source in the channel editor.
The channel number is added to the channel
bank editor. Available for Hotel TV when
"Smoovie" is selected in Standalone SI Vendor
This Feature Enables show/browse of all
antenna type (Air/Cable or Satellite) channels
together
• On: When it is ON, Guest can access
through complete Channel Map
irrespective of selected antenna type.
Channel list will also populate Air as well
Cable type Channels.
• Off: When it is OFF , Guest can access
Channel Map corresponding to selected
antenna type [AIR/CABLE or Satellite]
only. Channel list/Editor will show only
selected antenna type channels
• On : Check the DTV Program channel
number. (DTV channel editor is
inaccessible)
• Off: No check of the DTV Program channel
number.
(DTV channel editor is accessible, but
additional channel program number
update is not supported)
When there is a mismatch between the data
in the channel map and the transmitted data ,
TV auto tunes to restore the data/parameters
in the channel map.
• On: When Channel Rescan Message is
ON, The OSD showing the Channels
rescanning will be displayed to the Hotel
Guest
• Off: Hotel Admin can turn the Channel
Rescan Message to OFF, if the rescan
message OSD is not to be displayed to
Hotel Guest.
• On: If Pan EURO MHEG is set Off, MHEG
runs according to the existing product
specifications.
• Off: If Pan EURO MHEG is ser On, MHEG
is ON regardless of the product
specifications or region.
Enable or disable Mychannel feature.
Edit genre for channels. (Available when
Mychannel is On)
Picture Menu
Lock
On / Off
OFF
OFF
Enable or disable the Picture Menu.
Menu display
On / Off
ON
OFF
Enable or disable the Menu.
• On: Enable
• Off: Disable
4 Channel
5
My
Channel
Menu
6
OSD
20
Description
English
[HB670-XC]Install Guide-ENG.indd 20
2013-02-04 �� 3:11:02
No Item
Sub item
initial value
Standalone Interactive
Unlock / Lock /
OnlyPower /
Menu/Source
Unlock
Unlock
Subtitle Auto
On
On / Off
Off
Off
Clock Type
Off/SW Clock/
Ext. Clock
Off
Off
Local time
Standalone :
Manual / TTX
Interactive :
Manual / TTX /
Auto
Manual
Auto
12 Hour / 24
Hour
24 Hour
24 Hour
Failure / Success
Failure
Failure
0~4
4
4
Set Ext.Clock brightness in Picture on state.
(Enable when Clock Type is "Ext. Clock")
0~4
1
1
Set Ext.Clock brightness in standby state.
(Enable when Clock Type is "Ext. Clock")
On / Off
On / Off
OFF
OFF
OFF
OFF
Music Mode
Comp.
On / Off
OFF
OFF
Music Mode
Backlight
On / Off
OFF
OFF
8 Clock
Time Format
Clock Test
Clock Normal
Dim.
Clock Standby
Dim.
Music Mode AV
Music Mode PC
Music
Mode
Front panel (Local key) operation on/off.
• Lock: All panel keys will be blocked
• Unlock: All panel keys will be Operational
• Only Power: All keys except power key will
be blocked.(Panel Key)
• Menu-Source: Only Menu & Source keys of
panel will be blocked
This function turns On/Off the function that
automatically turns on the subtitle in a specific
country.
This function is supported for the Hotel
TV that is ready for receiving the DVB
broadcasting that is headed to Europe.
This function is related to France’s subtitle
specification. The rest of the countries’
subtitles function by the appropriate country
specification regardless of the Subtitle Auto
On function.
• On: When Subtitle Auto On is ON . It follows
France’s subtitle specification.
• Off: When Subtitle Auto On is OFF . It does
not follow France’s subtitle specification
Select clock type (Off/SW Clock/Ext. Clock)
• Off: No clock option of Hotel option shall
work.
• SW Clock: SW clock shall work only.
• Ext. Clock: LED Clock related item tow work
as Dimming/Clock test/Time Format
Selection of the way to update clock data
• Auto: : While set to Auto, The TV clock will
be updated by the time information provided
in the Tuned digital stream
• Manual: Use clock data from DVB channel
or manual clock setting.
• TTX: manual clock setting (with updating
from TTX data).
Panel Button
Lock
7 Operation
9
Description
Select Time Format (Enable when Clock Type
is "Ext. Clock")
Test brightness and pixel for EXT.Clock.
(Enable when Clock Type is "Ext. Clock")
Music Mode as the name suggests enables
the hotel admin to set the audio only option
for external sources such as AV/Comp/PC.
While ON, Guests can listen to the audio
from the external sources, even if the video
jack is not connected. If the video signal is
connected,
TV will display the video content, else will o/p
only audio. The TV Panel can be configured
to completely OFF or show a speaker icon, by
setting the backlight option.
This feature when set to ON , enables the
visibility of Audio Icon by turning TV panel
backlight ON when Music mode for AV/PC/
Component is turned ON.
English
[HB670-XC]Install Guide-ENG.indd 21
21
2013-02-04 �� 3:11:03
No Item
10
External
Device
Sub item
USB Media
Mode
External Source
Banner
On / Off
Off
Off
Default /
Automatic /
Disable
Default
Default
On / Off
ON
ON
On / PC / Off
OFF
OFF
Power On Src
/ Last Source
/ Each model
source list(AV1,
COMP, PC,
HDMI1…)
Power On
Src
Power On
Src
External
Source
Auto source
Anynet+Return
Source
22
Description
7610 Priority AV
1~3
This option defines the priorities in which
7610 Priority
1~3
2
2
the External sources (AV/PC/HDMI) will be
PC
switched in TV when connected on to RJP
7610 Priority
Device.
1~3
3
3
HDMI
Select RJP AV Source.
7610 AV option
AV
AV
AV
RJP HDMI
"HDMI1/DVI /
Select RJP HDMI Source (HDMI1/HDMI2/
HDMI1/DVI HDMI1/DVI HDMI3).
Option
HDMI2 / HDMI3"
Sound Bar Out
11
initial value
Standalone Interactive
1
1
External Device Like Samsung Sound Bar can
be connected to TV via Any Net Connection
and the TV Sound can be routed to Sound
Bar Device.
If the Features is OFF from Hotel Factory
Menu , the functionality is disabled.
TV main Speaker will be in mute state while
Sound Bar option is ON and the Speaker is
connected through HDMI.
This feature is used to change the behavior of
USB devices when plugged.
• Default : When this option is selected and
we plug USB then pop menu comes and if we
press enter then USB Media Play starts.
• Automatic : If this option is selected then
after plugging USB , USB Media Play starts
all by itself
• Disable : Once this option is selected then
pop up as well as automatic media play get
disabled. We receive no notification for the
USB plugging.
Displays the External Source information when
you change the TV source to external input.
Press the info key and the TV turns on.
• On : The External Source information is
displayed on the TV screen.
• Off : The External Source information is not
displayed on the TV screen.
Auto Source is the function which allows TV
to automatically switch to Connected Live
source,
once Hotel guest connects any video source
say Note PC, DVD player etc. without
pressing any remote or panel key.
• On : All external sources except PC will be
applicable for Auto Switch
• PC : only PC source is applicable for Auto
switch
• Off : None of the Sources will Auto Switch
Select Return Source when diconnect AnyNet+
English
[HB670-XC]Install Guide-ENG.indd 22
2013-02-04 �� 3:11:04
No Item
Bathroom
12
Speaker
13
Eco
Solution
Sub item
Logo/
Message
Description
Bathroom speaker can be operated in three
different ways by setting Sub Amp Mode in
standalone menu.
• 0 : Mode 0 disables bathroom speaker.
• 1 : In mode 1 Bathroom speaker follows
TV Main speaker. Bathroom speaker sound
is controlled from Samsung RCU and volume
keys available on TV panel.
Speaker volume = (Main speaker volume)/3 If
user presses mute key from Samsung RCU
then bathroom speaker shall also be muted.
• 2: In this case a separate panel (having up/
down keys) is connected to the TV. Bathroom
speaker volume (0~32) can be controlled from
those panel keys.
In this case TV main speaker audio is not at all
effected. Sub AMP Volume : 0~32
Set Sub AMP Volume. (Sub Amp Volume
option sets default Bathroom speaker
volume.)
This feature adjusts the brightness of the TV
to reduce power consumption.
• Off: Turns off the energy saving function.
• Low: Sets the TV to low energy saving
mode.
• Medium: Sets the TV to medium energy
saving mode.
• High: Sets the TV to high energy saving
mode.
SubAmp Mode
0~2
2
2
SubAmp
Volume
0~32
6
6
Off / Low /
Medium / High
OFF
OFF
On / Off
OFF
OFF
***
-
-
Off / BMP / AVI /
BOTH
OFF
OFF
***
-
-
3 second / 5
second / 7
second
5 second
5 second
***
-
-
Copies all settings of TV to USB
***
-
-
Copies all settings of USB to TV
Energy saving
Welcome
Message
Edit Welcome
Message
14
initial value
Standalone Interactive
Hospitality Logo
Hospitality
Logo DL
Logo Display
Time
Clone TV to
USB
Clone USB
to TV
15 Cloning
Setting Auto
Intialize
On / Off
OFF
OFF
Display Welcome Message
Edit Welcome Message
Select hospitality Logo type.
Download hospitality logo file from USB to TV.
Set the logo display time.
When this option is kept ON then it restores
the Picture Setting , Sound Setting and other
user menu setting which were there in clone
files at every power on.
So if any guest change the backlight or color
or any other user menu items then default
value settings of clone file get applied at each
power on.
English
[HB670-XC]Install Guide-ENG.indd 23
23
2013-02-04 �� 3:11:05
No Item
16
REACH
Server
17 Service
Sub item
initial value
Standalone Interactive
Description
REACH Server
update Time
OFF / 1hour /
2hour / 12:00
am / 2:00 am /
12:00 pm / 2:00
pm
1hour
n/a
Select SIRCH update Time.
In SIRCH update time , we have the option to
do automatic upgrade at 12:00 AM/PM or at
2:00 AM/PM. We can do hourly upgrade at an
interval of either 1 hr or 2 hr
REACH Update
Immediate
On/Off
Off
n/a
• On : Whenever TV goes to Stand-By mode,
always works SIRCH Update
• Off : Only works SIRCH Update on selected
SIRCH Update Time
***
87
n/a
Select SIRCH Update Channel
***
0000
n/a
Display the version of SIRCH Clone file
currently updated in TV.
All, 1 - 511
ALL
n/a
Select SIRCH Group ID
On/Off
Off
n/a
Enable or Disable REACH Display
REACH Server
Channel
REACH Server
Version
REACH Server
Group ID
S-LYNK
REACH
• On: The TV sound in the current TV source
is continouly outputted even though the
S-LYNK REACH menu is displayed.
• Off: The TV sound in the current TV source
is stopped when the S-LYNK REACH
menu is displayed.
• On: The TICKER contents is displayed.
• Off: The TICKER contents is not displayed.
Enter Self Diagnosis Menu.
• Picture Test: Use to check for picture
problems. If the problem appears in the test
picture, select Yes and follow the directions on
the screen.
• Sound Test: Use the built-in melody sound
to check for sound problems. If the problem
occurs during the test, select Yes and follow
the directions on the screen.
This can let you check the state of Variable
audio out and communication with the SI
STB or SBB. If you meet any problem in the
variable audio out feature or communication
with SI STB or SBB, please check this items.
S-LYNK
REACH Volume
On/Off
On
n/a
TICKER
On/Off
Off
n/a
Self Diagnosis
for TV
***
-
-
Self Diagnosis
for HTV
***
-
-
Upgrade Now
***
Service Pattern
***
-
-
Display Service pattern.
TV Reset
***
-
-
Reset the TV
Upgrade the TV SW.
✎✎REACH(Remote Enhanced Active Control for Hospitality) is a professional and interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel maping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are avalible only in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed in the REACH server
product for the more information of operating.
24
English
[HB670-XC]Install Guide-ENG.indd 24
2013-02-04 �� 3:11:07
¦¦ Welcome Message
Welcome message is a feature to display custom message on TV, every time TV is turned on by Guest in Hotel room.
–– Welcome message settings are placed in Hotel Option Menu.
–– Welcome message should be ON in order to display the message on power on.
Hospitality Mode
Standalone
SI Vendor
OFF
REACH Server
Service
Power On
Channel
My Channel
Menu OSD
Welcome Message
Operation
Edit Welcome Message
r
Clock
Music Mode
External Device
Hospitality Logo
ON
ON
Hospitality Logo DL
...
Logo Display Time
...
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
–– Welcome message can be of 25 characters and it can be edited by changing its text in Hotel Service menu.
–– Following is the list of characters supported for Welcome message:
In letters from A to Z only in capital letters is allowed.
✎✎
–– Welcome message can be edited by using navigation, color & enter key of a Remote in “Edit Welcome Message” OSD.
Edit Welcome Message
W
E
L
C
O
M
E
_
A BC D E FG
H I J K L MN
O PQ R S TU
VW
X
Y
Z
Move
A
Move to Left
B
Move to Right
C
Level Black
D
Done
Enter
Return
–– Welcome message and hotel logo cannot be active at the same time.
English
[HB670-XC]Install Guide-ENG.indd 25
25
2013-02-04 �� 3:11:08
¦¦ Hospitality Logo
The Hospitality Logo function displays the Hotel's picture image when the TV is powered on.
–– Hospitality Logo settings are in the Hospitality mode menus.
–– The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on.
–– If there is a logo image stored in the memory and Hospitality Logo option is on, the Hospitality logo is displayed when
the TV is turned on.
–– The Hospitality logo is not displayed when the Hospitality Logo option is off, even if the logo image has been loaded into
the TV.
Hospitality Mode
SI Vendor
Standalone
OFF
REACH Server
Service
Power On
Channel
My Channel
Menu OSD
Welcome Message
Operation
Edit Welcome Message
Clock
Music Mode
External Device
r
OFF
Hospitality Logo
BMP
Hospitality Logo DL
Logo Display Time
5 Second
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
yy Hospitality Logo
–– This option lets you choose whether the Hospitality Logo image is displayed or not.
–– Initial value is OFF.
–– Can be set to OFF or ON.
–– When set to ON, the Logo Download and Logo Time Display menu items become accessible.
yy Hospitality Logo DL
–– This option lets you download the logo image to the TV’s memory from a USB device.
–– Wait appears while the image is being copied to the TV.
–– Completed appears when the copy operation has finished successfully.
–– Failed appears when the copy operation was unsuccessful.
–– No USB appears if no USB device is connected.
–– No File appears if there is no file to copy on the USB device or or the file is in the wrong format (must be a BMP file). If
No File appears and you have a logo file on the USB device, check the file format.
yy Logo File Format
–– The TV supports only the BMP and AVI format.
–– The file name must be samsung.bmp or samsung.avi.
–– The maximum resolution of the BMP format is 960 x 540.
–– The maximum fi le size of AVI format is 30MB.
–– The TV does not change the size or scale of the image.
26
English
[HB670-XC]Install Guide-ENG.indd 26
2013-02-04 �� 3:11:08
¦¦ Cloning
USB Cloning is a function to download user configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup)
from one TV set and upload the same to other TV sets.
All the user-defined settings from the TV (Master Set) can be copied to the USB device.
yy Clone TV to USB: It is an operation to copy the stored data from the specific area on the
EEPROM from the TV set to the USB device.
1.Insert a USB drive into the USB port on the rear of the TV.
2.Enter Hotel Option by pressing this buttons in order.
xx MUTE → 1 → 1 → 9 → ENTER
3.Press the ▲ or ▼ button to select “Clone TV to USB”, then press the ENTER button.
4.The message “Clone TV to USB” is displayed, then press the ENTER button.
5.You can Make sure USB cloning behavior.
Logo/Message
Cloning
xx In Progress: during copying data to USB.
d
xx Completed: copy operation was finished successfully.
xx Failed: copy operation was not finished successfully.
xx No USB: any USB is not connected.
yy Clone USB to TV: It is an operation to download the stored data in USB device to TV
set.
1.Insert a USB drive into the USB port on the rear of the TV.
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
Logo/Message
Cloning
2.Enter Hotel Option by pressing this buttons in order. MUTE → 1 → 1 → 9 →
ENTER
3.Press the ▲ or ▼ button to select “Clone USB to TV”, then press the ENTER
button.
OFF
d
Clone TV to USB
Clone USB to TV
Setting Auto Initialize
OFF
4.The message “Clone USB to TV” is displayed, then press the ENTER button.
5.You can Make sure USB cloning behavior.
xx In Progress: during copying data to TV.
xx Completed: copy operation was finished successfully.
xx Failed: copy operation was not finished successfully.
xx No USB: any USB is not connected.
xx No File: there is no file to copy in USB.
✎✎ The operation to copy from USB to TV can be executed by pressing ENTER key for 5 seconds.
✎✎ The CLONE function only supports the same model series. (It does not work properly for different model series.)
For fast instant cloning during installation!
Insert USB key with master settings from first TV and press Enter key for 5 seconds.
English
[HB670-XC]Install Guide-ENG.indd 27
27
2013-02-04 �� 3:11:10
¦¦ Plug & Play
Hotel Plug & Play is a function that automatically performs the Hotel mode selection, Country Setup, Clock Setup and Picture
mode Setup once.
–– Hotel Plug & Play is available only one time when power is first turned ON.
–– After setting up first TV and Clone TV to USB
–– Next TV only needs to exit Hotel Plug & Play, connect USB, then Clone USB to TV.
Setup > Start
Local Set
Change Locat Set if Located in North America, Latin America and Europe.
In other regions, Please press SKIP button move to the next step.
Current Localset : EU
Change
Skip
Start
If Standalone Only is selected
Easy Set Up
Interactive
Set-Back Box will control TV functions.
Standalone mode
is set.
Standalone Plug & Play
After Plug & Play is completed, TV will be set to Standlone mode.
Standalone Only
Sets TV to Standalone mode and exit Plug & Play immediately after.
TV will enter the RF mode.
If Standalone Plug & Play
is selected
Welcome to Samsung TV
English
Eesti
Select your information in the categories below.
CountryBulgaria
Picture Mode
Suomi
Auto Tuning
Configure your TV
E
Select your language to start the on screen setup.
To receive channels, configure the options below Select the connected aerial
that you wand to use to get
then select Scan.
Select the country that you're
in now.
AerialAir
Standard
Channel Type
Press the buttons to move the
highlight
Press the enter button to select.
The Language Setting will be
applied to Main Menum and not
Plug and Play.
Francais
Deutsch
Scan
<Depending on Region, this step may not exist.>
- After selecting the country in the country
menu, some models may proceed with
an additional option to setup the pin
number.
- If you forget the PIN code, in the Hotel
menu, select the Service → TV Reset.
And set the pin code again in the Plug
& Play.
E
Auto Tuning
Auto Tuning is finding channels for you...
Channels 9
40%
Digital0
* TV
0
* Radio
0
* Data/Other
0
Analogue0
Stop
E
After Searching the channels.
Clock
TV Setup Complete!
Your TV is now ready to use
Set the right time by setting Daylight Savings
Time and your local Time Zone.
Time Zone
Auto Tuning
Set the time zone to GMT.
GMT4
28
Auto Tuning not completed
Digital2
Auto
DSTOff
OK
channels
Digital & Analogue
* TV
2
* Radio
0
* Data/Other
0
Analogue10
-- : --
Change Settings
Scan Again
English
[HB670-XC]Install Guide-ENG.indd 28
2013-02-04 �� 3:11:11
1.LocalSet
–– Check the Current Localset.
–– If you want to change the localset, select the Change.
–– If you select the Skip, the Start screen appears.
2. Start - Easy Set Up
–– If you select the Standalone Only, the Standalone hotel mode is set by default.
–– When you select the Interactive, Interactive Setup Menu is displayed. Press power off button to exit from Interactive
menu.
–– Select the Standalone Plug & Play to go next step.
3. Select the Language
–– Select the desired OSD(On Screen Display) language.
–– Display time: OSD timeout and operation are the same as Samsung's consumer TV models.
4.Select the Country and Picture Mode
–– Select the appropriate country and picture mode.
5. Auto Tuning
–– Select the desired antenna source and channel type. Configure the settings and select the Scan.
–– Auto Tuning is starting the channel search.
–– When the Auto Tuning is done, the channel information is displayed.
6. Clock
–– Set the right time by setting the DST(Daylight Savings Time) and Time Zone.
7. TV Setup Compete
English
[HB670-XC]Install Guide-ENG.indd 29
29
2013-02-04 �� 3:11:11
¦¦ SW Clock
The SW Clock shows the current time on the screen when the user presses the Info remote control key in standby mode.
–– If a user presses the Info key when the TV is in standby mode, the TV is turned on and shows the current time on the
screen for 10 seconds and then returns to standby mode.
–– The time is displayed as a digital clock at the normal banner size. The 12 or 24 hour time format of is determined
according to the format of the Information.
–– If the user presses the Info key when the TV is on, the original Info key function is executed.
yy Detailed Descriptions
–– The SW clock works depending on the On/Off setting in the Factory install menu.
–– If the SW clock is turned on, the Fast logo is automatically turned off. (In this case, even if you turn the Fast logo on
again, it is automatically turned off when the TV is turned on again.)
–– If the master power is turned off, the time setting is only maintained in models with a backup condenser and an RTC.
–– When a TV in standby mode shows the current time, the video mute and audio mute settings are maintained.
–– In this case, even if the Hotel logo is set to on, the Hotel Logo display is skipped.
–– This feature only works in StandAlone mode.
–– Other key function specifications when the SW clock is running
–– The Info key works like the power key.
–– Pressing the Power or Info key while the SW clock is running, puts the TV into Standby mode.
–– Pressing keys other than the Power and Info keys is ignored while the SW clock is running.
–– In this case, the on timer does not work.
–– The off timer and sleep timer work.
–– When clock mode in the Time menu is set to manual, the time of the sub micom is maintained by the RTC circuit.
–– Even if the current time is not configured, it is displayed in the same way as the menu. (--:--)
30
English
[HB670-XC]Install Guide-ENG.indd 30
2013-02-04 �� 3:11:11
¦¦ Multi Code Remocon
Multi Code Remocon is a special transmitter which is designed to control each TVs with one remote.
This function is useful where there is more than one TV in one location like hospital Set ID number will be displayed in source
osd. It is possible to support up to 9 different remote key transmission for multi code.
Initial ID code which each TV has is “0”.
–– ID code could be set and reset in Analog TV mode or PC mode. (not available in TTX channel or DTV channel)
–– ID code could be from 0 to 9.
–– Press RETURN + MUTE Key for over 7 seconds and the digit key a user wants to set.
–– Set ID OSD will be displayed in central position.
–– The following words will be displayed. “Remote control code is set to x. If you want to change Remote control code.
Enter the digit you want to change.” (x is the digit number) This OSD will be kept displaying until exit key is input.
Remote control code is set to 0. If you want to
change Remote control code, enter the digit you
want to change.
–– For example, TV and Remote will be set ID code #1 if user presses #1.
–– The following words will be displayed.“Remote control code is changed to 1” Then TV can be controlled by only remote
which has same ID code with TV’s.
–– If ID code does not match between remote and TV, the following words will be displayed. “ TV ID x”(x is the TV’s ID)
–– To reset ID code, press EXIT + MUTE key for over 7 seconds. ID code of both TV and Remote will be reset to “0”.
“Remote control code is set to 0.” will be displayed.
–– The way to set or reset the ID may differ depending on remote control. See the table below.
¦¦ Setting the Time
OO MENU → System → Time → Clock → Clock Set
yy The time is entered
–– Press the remote control button to select Clock set and set up the time.
Time
Clock
Sleep Timer Off
Wake-up Timer
yy Setting the Interactive Mode Time
–– If the Hotel System transmits time information, the time is set automatically.
–– If the Hotel System does not transmit time information, the time cannot be
displayed.
Clock
✎✎ If the time is set, clock will be displayed on the front panel.
Clock Mode ● Clock
● Time
Manual
Set
Zone Auto
English
[HB670-XC]Install Guide-ENG.indd 31
31
2013-02-04 �� 3:11:12
¦¦ Channel Bank Editor (Smoovie TV Only)
Channel Bank Editor is a function to edit the channel with 3 different Bank Options.
Depending on the Bank card, there are specific channels Hotel customer can enjoy.
Setting the Channel Bank Editor under Stand-alone Mode
1.Enter the Hotel Standalone menu by “MUTE+1+1+9+Enter”
2.Please select SI vendor : “Smoovie”
3.You will be able to find new menu option “Channel Bank Editor”
4.Enter the “Channel Bank Editor”
Hospitality Mode
Standalone
SI Vendor
OFF
REACH Server
Service
d
SI Vendor
Smoovie
d
Channel
d
Channel Bank Editor
<Depending on model and region, some menu items may not exist>
5.Edit the channel bank like below example.
a. Bank1 (Free channel): Select the channel that will be used when remote doesn’t have any card.
b. Bank2 (Family Card - Green): Select the channel that will be used when remote has the GREEN CARD.
c. Bank3 (Adult Card - Red): Select the channel that will be used when remote has the RED CARD.
Channel Bank Editor
Bank1 (4)
Bank2 (6)
Bank3 (36)
All
1 1futech
1
BBC 1
2
24ore.tv
2
C3
3
BBC World
3
C5
4
Coming Soon
4
S2
Move
Select/Deselect
Return
References of using SMOOVIE Remote Controller
1.If you select SMOOVIE as SI vendor, you should use SMOOVIE Remote Controller.
2.With Numeric key of remote controller, user can select only Bank1 channel.
In this reason, if you want to change the channel using Green or Red Card, please use channel up/down keys.
3.At the Channel guide or the Channel list, user can see only Bank1 channel list.
32
English
[HB670-XC]Install Guide-ENG.indd 32
2013-02-04 �� 3:11:13
¦¦ Channel Editor
Channel Editor is a function to edit channel number and name.
–– Use Channel Editor to sort the channels as user-desired channel numbers.
Hospitality Mode
Standalone
SI Vendor
OFF
REACH Server
Service
Power On
Channel
My Channel
Menu OSD
Operation
r
Clock
Music Mode
Channel Editor
External Device
External Source
Bathroom Speaker
Eco Solution
Logo/Message
Cloning
<Depending on model and region, some menu items may not exist>
Simple Steps for Channel Editor under Stand-alone Mode
Step
1
2
3
4
5
Broad Outline
Operate ‘Channel Auto Store’ in Hotel Option Menu
Enter ‘Channel Editor’ in Hotel Option Menu
Compile a table related to the final channel lists you want to have
Rearrange channels with TOOLS Button based on the table you compiled
Press EXIT or RETURN Button to exit.
<For better comprehension, please refer to the following details>
English
[HB670-XC]Install Guide-ENG.indd 33
33
2013-02-04 �� 3:11:13
¦¦ My Channel
Determines the country and genre for the channels provided by the hotel, and if the user selects a country and genre, shows
the corresponding channels.
yy You must select the country first, or you can NOT set a genre.
yy If you select the genre that NOT added any channels, Channel list display all of channels.
yy My Channel works in Standalone mode only.
yy SI Vendor in Standalone mode: This des not work if Smoovie is selected.
yy This is in the Hotel Options in Hotel Menu > Service Mode and can be turned on or off.
yy The option only works when it is set to On.
Channel Composition [Genre Mode]
Standard
Hotel
Category
Ch. Mode
Genre
All (Default)
News
Radio
Entertainment
Sport
Hotel
1
3
2
Current status : Austria/Sports
Antenna Mode Activation
Air/Cable
Satellite
O
O
O
O
O
O
O
O
O
O
O
O
Provide genre channel mode by each
country that master has managed in
factory mode.
My Channel
4
5
Country
Genre
All Country
All
Austria
News
Belgium (Dutch)
Radio
Belgium (French)
Entertainment
Czech
Sports
France
Hotel
6
Description
Germany
▼
7
(Blue)Keep Previous (U/D/L/R)Move (En)Enter
8
* For the number of items to be displayed in the list, refer to the design document.
Key Guide
Button
Action
Nav. Help
BLUE
Returns to the screen. (Genre setup: Last Country & Genre)
Keep Previous
ENTER
Selects an item.
Enter
< CH >
Move the highlight by page.
(No Guide)
▲/▼
Navigates the each country, genre list. (in a circular manner.)
►
Selects the highlighted item, and then move the highlight to Genre section.
RETURN
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
EXIT
Returns to the screen. (Genre setup: Last Country & Genre)
(No Guide)
34
Move
English
[HB670-XC]Install Guide-ENG.indd 34
2013-02-04 �� 3:11:14
✎✎Notes
xx This section describes the layout of Front UI that appears when TV is turned on. (Factory Mode > Genre Mode:
Enable)
xx The genre is sub-list of each country.
xx The broadcast screen that was being displayed the last memorial channel.
–– If user want to keep previous country & genre channel map, presses ‘BLUE’, RETURN, EXIT remote-control key to
close the Front UI.
✎✎Etc.
xx Default Highlight : Last Memory items (Country, Genre)
xx Timeout (60 sec)
Elements
No
Name
1
Background Screen
Description
yy Displays the last memorial channel that shows when TV is turned on.
2
Function Title
yy This is name of the function.
3
Current Status
yy Display current settings the Country/Genre.
4
Country Items
yy The item for the country list is displayed.
yy Displays the last selected country.
5
Genre Items
yy The item for the genre list is displayed.
yy Displays available genre items by each country that master managed in factory
mode. (always provide ‘All’ item)
yy Displays the last selected genre.
6
Highlight
yy If the item title is too long to be displayed within the area, Auto Text Sliding works.
7
Indicator
yy This is displayed when there is a previous or next page.
8
Nav. Help
yy The key guide is right-aligned.
English
[HB670-XC]Install Guide-ENG.indd 35
35
2013-02-04 �� 3:11:15
Highlight Interaction [Country Items]
• This page is only for interaction. Each screen may not be exactly identical to actual one.
✎✎Notes
xx User can navigate the list items in each country & genre list by pressing the up or down remote control keys.
xx Circular navigation is supported.
1
My Channel
My Channel
Current status : All Country/Sports
Current status : All Country/Sports
Country
Genre
▲
DOWN x 4
Country
Genre
▲
All Country
All
All Country
All
Austria
News
Austria
News
Belgium (Dutch)
Radio
Belgium (Dutch)
Radio
Belgium (French)
Entertainment
Belgium (French)
Entertainment
Czech
Sports
Czech
Sports
France
Hotel
France
Hotel
UP x 4
Germany
Germany
▼
▼
UP x 4
DOWN x 4
My Channel
Current status : All Country/Sports
Country
Genre
▲
All Country
All
Austria
News
Belgium (Dutch)
Radio
Belgium (French)
Entertainment
Czech
Sports
France
Hotel
Germany
▼
DOWN
UP
UP
DOWN
My Channel
Current status : All Country/Sports
Country
Genre
▲
Austria
All
Belgium (Dutch)
News
Belgium (French)
Radio
Czech
Entertainment
France
Sports
Germany
Hotel
Hungary
▼
UP x N
END
My Channel
My Channel
Current status : All Country/Sports
Country
Genre
▲
Slovakia
All
Spain
News
Switzerland
Radio
United Kingdom
Entertainment
Eastern Europe
Sports
Other
Hotel
▼
36
DOWN x N
Current status : All Country/Sports
Country
Genre
▲
Slovakia
All
Spain
News
Switzerland
Radio
United Kingdom
Entertainment
Eastern Europe
Sports
Other
Hotel
▼
English
[HB670-XC]Install Guide-ENG.indd 36
2013-02-04 �� 3:11:17
Highlight Interaction [Default Genre]
• This page is only for interaction. Each screen may not be exactly identical to actual one.
My Channel
My Channel
Current status : All Country/Sports
Country
Current status : All Country/Sports
Genre
▲
All Country
All
Austria
News
Country
ENTER / RIGHT
Genre
▲
All Country
All
Austria
News
Belgium (Dutch)
Radio
Belgium (Dutch)
Radio
Belgium (French)
Entertainment
Belgium (French)
Entertainment
Czech
Sports
Czech
Sports
France
Hotel
France
Hotel
LEFT
Germany
Germany
▼
▼
Navigation Help Area
Navigation Help Area
yy The current selection of the country is high-lighted.
yy Default High-light: The current selection of the genre.
My Channel
My Channel
Current status : All Country/Sports
Country
Current status : All Country/Sports
Genre
▲
Country
ENTER / RIGHT
Genre
▲
Austria
All
Austria
All
Belgium (Dutch)
News
Belgium (Dutch)
News
Belgium (French)
Hotel
Belgium (French)
Hotel
Czech
Czech
LEFT
France
France
Germany
Germany
Hungary
Hungary
▼
▼
Navigation Help Area
yy Tthexet other item of the county is high-lighted. (ex. France)
Navigation Help Area
yy Default Highlight : All
English
[HB670-XC]Install Guide-ENG.indd 37
37
2013-02-04 �� 3:11:17
Mode Change Interaction 1 (1/2)
• This page is only for interaction. Each screen may not be exactly identical to actual one.
1
My Channel
My Channel
Current status : All Country/Sports
Current status : All Country/Sports
Country
Genre
Country
▲
DOWN
All Country
All
Austria
News
Genre
▲
All Country
All
Austria
News
Belgium (Dutch)
Radio
Belgium (Dutch)
Entertainment
Belgium (French)
Entertainment
Belgium (French)
Hotel
Czech
Sports
France
Hotel
LEFT
Czech
France
Germany
Germany
▼
▼
Navigation Help Area
Navigation Help Area
yy Current Genre Mode : All Country / Sports
ENTER / RIGHT
My Channel
My Channel
Current status : All Country/Sports
Country
Current status : All Country/Sports
Genre
▲
ENTER
Country
UP
Genre
▲
All Country
All
All Country
All
Austria
News
Austria
News
Belgium (Dutch)
Entertainment
Belgium (Dutch)
Entertainment
Belgium (French)
Hotel
Belgium (French)
Hotel
DOWN
Czech
Czech
France
France
Germany
Germany
▼
▼
Navigation Help Area
Navigation Help Area
yy If the country is selected, highlight move to genre menu
ENTER / RIGHT
automatically.
6
38
English
[HB670-XC]Install Guide-ENG.indd 38
2013-02-04 �� 3:11:18
Mode Change Interaction 1 (2/2)
• This page is only for interaction. Each screen may not be exactly identical to actual one.
5
1
6
My Channel
Current status : All Country/Sports
Country
1
Genre
▲
ENTER
Info
Genre Mode change to Austria/News.
OK
All Country
All
Austria
News
Belgium (Dutch)
Entertainment
Belgium (French)
Hotel
Czech
France
Germany
▼
Navigation Help Area
yy The genre mode change complete message is displayed.
yy Timeout(5 sec.)
yy If the left key is pressed from the genre to country menu,
highlights an existing selected country item.
ENTER / RETURN / Timeout
Current Status : Austria / News
English
[HB670-XC]Install Guide-ENG.indd 39
39
2013-02-04 �� 3:11:19
Mode Change Interaction 2 (1/2)
• This page is only for interaction. Each screen may not be exactly identical to actual one.
1
My Channel
My Channel
Current status : All Country/Sports
Current status : All Country/Sports
Country
Genre
Country
▲
Genre
▲
All Country
All
Austria
News
DOWN
All Country
All
Austria
News
Belgium (Dutch)
Entertainment
Belgium (Dutch)
Entertainment
Belgium (French)
Sports
Belgium (French)
Sports
Czech
Hotel
Czech
Hotel
UP x 5
France
France
Germany
Germany
▼
▼
Navigation Help Area
Navigation Help Area
yy Current Genre Mode : All Country / Sports
ENTER / RIGHT
My Channel
Current status : All Country/Sports
Country
101
Info
Genre
▲
Genre Mode change to Austria/News.
OK
BLUE
/
RETURN
/
EXIT
All Country
All
Austria
News
Belgium (Dutch)
Entertainment
Belgium (French)
Sports
Czech
Hotel
France
Germany
▼
Navigation Help Area
ENTER
/
RETURN
/
Timeout
5
yy If the country is selected, highlight move to genre menu automatically.
Current Status : Austria / News
yy Current Genre Mode : All Country / Sports
40
English
[HB670-XC]Install Guide-ENG.indd 40
2013-02-04 �� 3:11:20
Power On Scenario [Last Memory]
• This page is only for interaction. Each screen may not be exactly identical to actual one.
1
Current Status : Austria / News
POWER
Power Off
yy Current Genre Mode : Austria / News
POWER
My Channel
Current status : All Country/Sports
Country
Genre
▲
All Country
All
Austria
News
Belgium (Dutch)
Entertainment
Belgium (French)
Hotel
Czech
France
Germany
▼
Navigation Help Area
yy Current Genre Mode : Austria / News
English
[HB670-XC]Install Guide-ENG.indd 41
41
2013-02-04 �� 3:11:20
Genre Editor (This configures the genres of each of the hotel TV channels.)
yy This can be used through the Hotel Menu (Factory).
yy Supported genres include News, Radio, Entertainment, Sports and Hotel.
yy More than one genre can be selected for each channel at the same time.
yy Country Editor (Channel Editor): This is the editor that configures the country for each of the hotel TV channels.
yy Supported countries (20 countries): Austria, Belgium, China, Denmark, Finland, France, Germany, Greece, Italy, Japan,
Netherlands, Norway, Portugal, Russia, Korea, Spain, Sweden, Turkey, USA
yy If more than one channel is set to a country, the country is registered as a category and users can view the channels by
country.
yy More than one country can be set to a channel. If the user selects a category, only the channels corresponding to the
country are displayed in the channel list.
yy If any channel for which the country is set is selected from the channel list, the Edit Countries item is added to the Tools.
Otherwise, the Add to Countries item is added to the Tools.
yy * If the corresponding function is executed, a country for the selected channel can be set or canceled.
yy Front UI
yy Provides the screen where the user can select a country or genre when the user turns the power on.
Left Frame Layout
Key Guide
Button
Action
Nav. Help
ENTER
Selects or enters the corresponding Channel Browser area.
(No Guide)
RETURN
Selects or enters the corresponding Channel Browser area.
Return
▲/▼
Moves the highlight up or down.
(No Guide)
►
Moves the highlight to the Channel Browser area.
(No Guide)
INFO
Shows the Category Info.
(No Guide)
TOOLS
Shows the utility function menus.
Tools
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎✎Notes
xx This is a component of the Left Frame (Country Categories).
✎✎Etc.
xx Default Highlight: ‘The currently selected country’
42
English
[HB670-XC]Install Guide-ENG.indd 42
2013-02-04 �� 3:11:21
Elements
No
Name
Description
yy When the user enters this screen, the currently selected default item is highlighted.
yy The Country Icon + Category Name are provided. (If the highlight is in the Main
Frame, only the icon is displayed.)
yy Moving the highlight
–– Pressing the up or down button moves the highlight.
–– If the items cannot be displayed on one page, up and down indicators are
provided.
–– Once the highlight is moved to a category, the channel list corresponding to the
corresponding category is loaded to the Main Frame.
1
Left Frame [Country Categories]
Standard
Category
Ch. Mode
Original Tuned
Country
Hotel
Antenna Mode Activation
Air/Cable
Satellite
Registered
O
O
All Country
O
O
Country 1
O
O
Country 2
O
O
.
O
O
Description
yy Lists all the channels registered by the Auto
Tune operation.
yy Provides the list of channels and sources
specified in the Registered Channels list.
yy All Country is the sum of all channels
registered to each country. (This is only
provided to end users.)
Tools [Registered/Countries Categories]
• Channel Manager > Channel Category > Tools > Info
yy
yy
yy
yy
[HB670-XC]Install Guide-ENG.indd 43
The items are displayed without ‘Channel’.
If the Registered/Country item in the Left Frame is highlighted,
you can enable the corresponding window by pressing the
‘INFO’ remote control key.
All countries are displayed.
You can navigate country items by pressing the up or down key.
English
(Indicators are provided.)
43
2013-02-04 �� 3:11:21
✎✎Notes
xx This is a definition of the Tools menu in the Left Frame Category.
xx Only the Info item for each Register/Country is provided.
Elements
Category
Tools menu
Descriptions
Registered, Country
Information
Registered Channels. The number of channels of each country.
• The items are displayed without ‘Channel’.
Error Cases
✎✎Notes
xx This is the message for when there are no saved channels in the Registered Channels list.
Elements
No
Name
1
Message
Description
yy When entering the browser, if the Registered channels item is empty, a popup message is
displayed which enables users to switch to the Auto Store (Program) menu.
yy When both the time and the channel are not configured, and a user enters the Channel
Manager, a message that allows the user to switch to the Auto Tuning (Auto Program)
operation is displayed in the same way as above.
xx This is the message when the time is not configured.
–– If the time is not configured, the message is displayed in Factory Mode before entering the Channel Manager.
44
English
[HB670-XC]Install Guide-ENG.indd 44
2013-02-04 �� 3:11:22
✎✎Notes
xx This is the component for when there are no channels registered to the country category.
Elements
No
Description
Description
yy The message is displayed when the currently selected country does not contain any
items.
Main Frame [Channel Browser]
English
[HB670-XC]Install Guide-ENG.indd 45
45
2013-02-04 �� 3:11:22
Key Guide
Button
Action
Nav. Help
< CH >
Moves the page.
Page
ENTER
Selects or enters the corresponding Channel Browser area.
Select
RETURN
Returns to the previous step (Factory Mode).
Return
▲/▼
Moves the highlight up or down.
(No Guide)
►
Moves the highlight to the Channel Browser area.
(No Guide)
INFO
Shows the Category Info.
(No Guide)
TOOLS
Shows the utility function menus.
Tools
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎✎Notes
xx This is a component of the Main Frame (Channel Browser).
xx The initial highlight is on the channel before entering Factory Mode or the external input.
Elements
No
Name
1
Main Frame
yy Shows the channel or the source list of the currently selected category.
2
Scroll Bar
yy Shows the position of the current page amongst the total amount of pages.
3
Navigation Help Area
yy This is displayed whenever a user enters the Channel Manager. (If a user exits and then
reenters the Channel Manager, it is displayed again.)
yy This disappears when the timeout (5 sec.) is reached or a user presses a key.
4
Navigation Help Area
yy The currently configured country information and the RED buttons are left-aligned.
(They are displayed and navigated by group graphically.) The key guide is right-aligned.
46
Description
English
[HB670-XC]Install Guide-ENG.indd 46
2013-02-04 �� 3:11:22
Add to Countries / Edit Countries (1/2)
Key Guide
Button
Action
Nav. Help
ENTER
Selects the highlighted item.
Enter
RETURN
Cancels and returns to the previous screen (Tools).
Return
▲/▼
Moves the highlight over country items.
Move
◄/►
Moves the highlight.
Move
INFO
N/R
N/R
TOOLS
Closes the current window and displays the ‘Tools’ menu.
(No Guide)
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎✎Note.
xx This is the definition of Add to Countries.
xx The highlighted channel or more than one selected channel is added to the Country category.
✎✎Etc.
xx Timeout (60 sec)
English
[HB670-XC]Install Guide-ENG.indd 47
47
2013-02-04 �� 3:11:23
Elements
No
Name
Description
1
Add to Countries
Window
• If there are no channels that have been registered to the country list in the selected
channels, “Add to Countries” is displayed as the title.
• A check box is displayed depending on whether the country that was selected when
entering the screen is registered or not.
2
Guide
• The number of the selected channel or the channel name.
- The channel name is displayed when one channel has been selected: Selected channel:
3
Selection Info
NNNN-NNN ABC
- The number of selected channels is displayed when more than one channel has been
selected: Selected Channels : N
• The message is displayed after the completion of the operation. (This message is always
4
Complete Message
displayed if the OK button is selected.)
• How to identify the meaning of multiple channel selection marks
• When all of the items have been registered.
5
Selection Mark
• When only part of the items have been registered.
• Channel Manager > Browser > Tools > Add to Countries
• When none of the items have been registered.
Add to Countries / Edit Countries (2/2)
Key Guide
Button
Action
Nav. Help
ENTER
Selects the highlighted item.
Enter
RETURN
Cancels and returns to the previous screen (Tools).
Return
▲/▼
Moves the highlight over country items.
Move
◄/►
Moves the highlight.
Move
INFO
N/R
N/R
TOOLS
Closes the current window and displays the ‘Tools’ menu.
(No Guide)
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
48
English
[HB670-XC]Install Guide-ENG.indd 48
2013-02-04 �� 3:11:23
✎✎Notes
xx This is the definition for Edit Countries.
xx The highlighted channel item or more than one selected channel item is added or deleted from the Country category.
✎✎Etc.
xx Timeout (60 sec)
Elements
No
Name
Description
1
Add to Countries
2
Guide
3
Complete Message
yy If there is a registered channel among the selected channels, Edit Countries is
displayed as the title.
yy A check box is displayed depending on whether the selected country is registered
or not.
yy The message is displayed after the completion of the operation. (This message is
always displayed if the OK button is selected.)
Edit Channel Number [Swap Type]
• Channel Manager > Browser > Tools > Add to Countries
• Channel Manager > Browser > Tools > Edit Channel Number
Key Guide
Button
Action
Nav. Help
ENTER
Applies the changes and closes the window.
Enter
RETURN
Cancels and returns to the previous screen (Tools).
Return
▲/▼
Changes the channel number of the selected channel.
Adjust
0~9
Enters a digit.
Number
INFO
N/R
N/R
TOOLS
Closes the current window and displays the ‘Tools’ menu.
(No Guide)
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎✎Notes
xx This is the definition of the function that changes the channel number. (Swap Type)
xx Channel numbers can be changed in all the channel lists and changes are applied to all the channels.
xx If the new channel number has not been allocated to another channel, the channel number is updated to the new
channel number and the list is sorted again in ascending order of channel number.
xx If the new channel number has already been allocated to another channel, follow the Hotel specifications.
English
[HB670-XC]Install Guide-ENG.indd 49
49
2013-02-04 �� 3:11:24
✎✎Etc.
xx Vertical circulation is supported.
Elements
No
1
2
Name
Description
Edit Channel
Number Window
yy Both the numeric keys and the Up/Down keys are supported.
–– Selected Channel: Shows the currently selected channel name.
–– Number: Shows the new channel number.
(The currently allocated channel name is also displayed.)
–– Name: Shows the currently allocated channel name. (If there are no channels, it is
displayed as “(Empty)”.) : If there is a channel but it does not have a name, the name
is represented as “-----”.
Warning
Message
yy If an already allocated channel is selected
–– If the new channel number has already been allocated to another channel, the
confirmation message pops up. (Refer to the figure below.)
–– If the user wants to change the channel number to one that has already been
allocated to another channel, the channel numbers are swapped and saved.
Edit the Channel Number [External Input] (3/3)
• Channel Manager > Browser > Tools > Edit Channel Number
50
English
[HB670-XC]Install Guide-ENG.indd 50
2013-02-04 �� 3:11:24
Key Guide
Button
Action
Nav. Help
RED
If a user presses the button, the channel number is initialized.
Reset
ENTER
Applies the changes and closes the window.
Enter
RETURN
Cancels or returns to the previous screen (Tools).
Return
▲/▼
Changes the channel number of the selected channel.
Adjust
0~9
Enters a digit.
Number
INFO
N/R
N/R
TOOLS
Closes the current window and displays the ‘Tools’ menu.
(No Guide)
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎✎Notes
xx This function allocates an external input source to a channel number. (The changes are applied to all the channels.)
xx If the new channel number has already been allocated to another channel, follow the Hotel specifications.
✎✎Etc.
xx Default Highlight: Channel number area.
xx Vertical circulation is supported.
xx Timeout (60 sec)
Elements
No
Name
Description
yy The channel number area.
–– Both the numeric keys and the Up/Down keys are supported.
–– If no value is allocated, as many ‘-’ are displayed as the number of digits.
1
Channel Number Area
▲
-▼
▲
→
1
▼
▲
→
15
▼
2
Source Name
yy External input name
–– Items that cannot be configured are disabled.
3
Nav. Help Area
yy If a user presses the red button, the channel number is initialized.
English
[HB670-XC]Install Guide-ENG.indd 51
51
2013-02-04 �� 3:11:25
Edit Channel Name
• Channel Manager > Browser > Tools > Edit Channel Name
Key Guide
Button
Action
Nav. Help
GREEN
Saves the changes and returns to the Channel Manager.
Done
ENTER
Saves the channel name and moves the cursor to the next field.
Enter
RETURN
Cancels and returns to the previous screen (Tools).
Return
▲/▼/◄/►
Navigates on the keyboard.
Move
0~9
Enters a digit.
(No Guide)
INFO
N/R
N/R
TOOLS
Closes the current window and displays the ‘Tools’ menu.
(No Guide)
EXIT
Cancels and returns to the previous step (Factory Mode).
(No Guide)
✎✎Notes
xx This is the definition of the keypad that is used for the Edit Channel Name function.
✎✎Etc.
xx Timeout (60 sec)
Elements
No
Name
1
Channel Name Edit Window
Description
2
Channel Name
yy The cursor and the character that are currently being entered are in the color
of the highlight.
yy When the maximum number of characters is reached, the cursor is not
displayed.
3
Keyboard
yy For a detailed scenario, refer to the keypad design document.
52
English
[HB670-XC]Install Guide-ENG.indd 52
2013-02-04 �� 3:11:26
Tools [Edit Mode]
Edit Mode
Content Highlight (when the number of the checked item is 0 or 1)
Add to Countries
Edit Countries (when an already-registered item is checked.)
Channel Name Edit
Edit Channel Number
Video Mute
Channel Copy (Astra HD +)
Reorder (Satellite)
Select All
Deselect All (this is only displayed when 1 or more items are
selected)
Delete
When there is more than one checked item.
Add to Countries
Edit Countries (when an already-registered item is
checked.)
Video Mute
Reorder (Satellite)
Select All
Deselect All
Delete
✎✎Notes
xx This is the definition of the Tools menu.
xx The position of the popup menu: The Tools menu for an item in the left column of the Channel List → This is displayed
on the right. The Tools menu for an item in the right column of the Channel List → This is displayed on the left.
xx If a user presses the Tools button when the highlighted item is not selected, the item is automatically marked as
selected.
xx For the detailed specifications of each function, refer to the NEO Channel Manager.
English
[HB670-XC]Install Guide-ENG.indd 53
53
2013-02-04 �� 3:11:26
CH Banner [when a channel number is allocated to an external input]
✎✎Notes
xx The TV channel banner specifications are applied.
xx When there is an unsupported item or there is no corresponding information, the item values are not displayed.
xx The channel name is represented as the ‘external input name’.
Elements
No
Name
1
External Input Name
Description
The Channel List provides some functions of the GenreTV.
yy Country Mode
yy Changes the genre mode.
¦¦ Mixed Channel Map
Mixed Channel Map is a function to mix Air, Cable and Setellite channels.
–– Mixed channel Map should be ON in order to mix Air, Cable and Setellite channels.
–– Use Channel Editor to sort the channels after turning on 'Mixed channel Map' in Hotel Option Menu.
¦¦ Sound Bar
yy Samsung Sound-Bar & Hospitality TV in 2013
–– Samsung Sound-Bar & hospitality TV support HDMI 1.4, so you can listen to TV’s sound on Sound-Bar by using single
HDMI cable.
–– Supporting model.
yy Sound-Bar : HW-E350/E450/E550
yy The operation of “Hotel mode” in Sound Bar
–– The following items of TV’s hotel option menus should be set in advance.
yy Hotel option → Power On → Power ON Volume = "Enable" / Power ON Vol / Max Vol
yy Hotel option → External Device → Sound Bar Out = "On"
–– Connect an HDMI cable from the HDMI OUT port of Sound-BAR to the HDMI3 port of hospitality TV.
–– After being connected to the 2013 hospitality TV via HDMI Cable, while TV turns on, Sound-Bar automatically detects
TV and then, will be converted to “hotel mode” by itself.
–– The change with power-on volume & max volume on TV is applied to the connected sound-bar since TV boots twice.
54
English
[HB670-XC]Install Guide-ENG.indd 54
2013-02-04 �� 3:11:27
yy Features of "Hotel MODE" in Sound-BAR
––
––
––
––
––
Synchronized power on/off with TV.
HDMI_CEC enabled.
Accessible “HDMI OUT” port only. (Other inputs are disabled)
Synchronized “power-on”&“max” volume with TV’s one. (Sound-Bar’s volume is set as the half of TV’s one)
Adjustable “power-on”&“max” volume acquired from TV’s hotel option menu. (Sound-Bar volume=TV volume/2)
Ex.) If the volume settings in TV are “power-on volume=20 and max volume=90”, Sound bar will work as power-on
volume=10, max volume=45.
*This function may differ depending on the model.
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the
instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. We do not advice you to
do it yourself.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own.
Wall Mount Kit Specifications (VESA)
✎✎Wall mount kit is not supplied but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If
installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎✎NOTE
Standard dimensions for wall mount kits are shown in the table below.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws that do not comply with the VESA standard screw specifications.
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
xx Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
xx Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
xx Do not exceed 15 degrees tilt when mounting this TV.
xx
xx
xx
xx
xx
inches
VESA Spec. (A * B)
19~22
75 X 75
26~28
100 X 100
32~42
200 X 200
46~60
400 X 400
Standard Screw
Quantity
M4
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury
due to electric shock.
English
[HB670-XC]Install Guide-ENG.indd 55
55
2013-02-04 �� 3:11:27
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or
destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided on
the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.
To avoid the TV from falling
1.Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been firmly installed onto
the wall.
✎✎You may need additional material such as an anchor depending on the type of wall.
✎✎Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2.Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV
again.
✎✎Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
3.Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong string and then tie the string tightly.
✎✎NOTE
• Install the TV near to the wall so that it does not fall backwards.
• It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
• Untie the string before moving the TV.
4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any
doubt about the security of your connections, contact a professional installer.
Anti-theft Kensington Lock
The Kensington Lock is not supplied by Samsung. It is a device used to physically
fix the system when using it in a public place. The appearance and locking method
may differ from the illustration depending on the manufacturer. Refer to the manual
provided with the Kensington Lock for additional information on proper use.
To lock the product, follow these steps:
1
✎✎Please find a “K” icon on the rear of the TV. A kensington slot is beside the
“K” icon.
1.Wrap the Kensington lock cable around a large, stationary object such as desk or
chair.
2.Slide the end of the cable with the lock attached through the looped end of the
Kensington lock cable.
<Optional>
3.Insert the locking device into the Kensington slot on the product (1).
4.Lock the lock.
✎✎These are general instructions. For exact instructions, see the User manual supplied with the locking device.
✎✎The locking device has to be purchased separately.
✎✎The location of the Kensington Lock may be different depending on its model.
56
English
[HB670-XC]Install Guide-ENG.indd 56
2013-02-04 �� 3:11:28
Specifications
Items
TV System
Speaker out
Data
Comment
28inch : 5W x 2
32inch / 39inch / 42inch / 46inch : 10W x 2
Audio out
Input
Specification
PAL, SECAM, DVB-TC, DVB-T2CS2
Variable Audio
4W mono 8 ohm SPK'
Digital audio out
Optical
Component
Y, Pb, Pr, Audio-L/R
PC
D-sub, Audio-L/R
A/V
Audio Video Jack
EXT
Scart Jack
HDMI
Compatible with the HDMI Specifications
Antenna
75 ohm Unbalanced, Din Jack , F Jack
DATA
RJ-12
RJP
RS232
Operating temperature
10°C ~ 40°C (50°F ~ 104°F)
Operating Humidity
10% ~ 80%
Storage Temperature
-20°C ~ 45°C (-4°F ~ 113°F)
Storage Humidity
5% ~ 95%
Phone Jack output
BTL Sound output
Jack Pack Only, TeleAdapt RJP Only
non-condensing
non-condensing
✎✎Design and specifications are subject to change without prior notice.
✎✎For information about power supply, and more about power consumption, refer to the label attached to the product.
✎✎The above specifications may differ depending on the model.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
English
[HB670-XC]Install Guide-ENG.indd 57
57
2013-02-04 �� 3:11:28
This page is intentionally
left blank.
[HB670-XC]Install Guide-ENG.indd 58
2013-02-04 �� 3:11:28
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
Customer Care Centre 
Web Site
ALBANIA
42 27 5755
www.samsung.com
AUSTRIA
0810 - SAMSUNG (7267864, € 0.07/min)
BELGIUM
02-201-24-18
www.samsung.com
www.samsung.com/be (Dutch)
BOSNIA
05 133 1999
www.samsung.com/be_fr (French)
www.samsung.com
BULGARIA
07001 33 11
www.samsung.com
CROATIA
www.samsung.com
www.samsung.com
DENMARK
062 SAMSUNG (062 726 7864)
800 - SAMSUNG (800-726786)
Samsung Electronics Czech and Slovak, s.r.o., Oasis Florenc, Sokolovská 394/17, 180 00, Praha 8
70 70 19 70
FINLAND
030 - 6227 515
www.samsung.com
FRANCE
01 48 63 00 00
www.samsung.com
GERMANY
01805 - SAMSUNG (726-7864 € 0,14/Min)
www.samsung.com
CYPRUS
From landline : 8009 4000
From landline : 80111-SAMSUNG (7267864)
www.samsung.com
CZECH
GREECE
www.samsung.com
www.samsung.com
HUNGARY
From landline & mobile : (+30) 210 6897691
06-80-SAMSUNG(726-7864)
ITALIA
800-SAMSUNG(726-7864)
www.samsung.com
KOSOVO
+381 0113216899
www.samsung.com
LUXEMBURG
261 03 710
www.samsung.com
MACEDONIA
023 207 777
www.samsung.com
MONTENEGRO
020 405 888
www.samsung.com
NETHERLANDS
0900-SAMSUNG (0900-7267864) (€ 0,10/Min)
www.samsung.com
NORWAY
815-56 480
0 801-1SAMSUNG(172-678)
www.samsung.com
POLAND
PORTUGAL
RUMANIA
+48 22 607-93-33
808 20-SAMSUNG (808 20 7267)
From landline : 08010-SAMSUNG (7267864)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
SERBIA
From landline & mobile : (+40) 21 206 01 10
0700 Samsung (0700 726 7864)
SLOVAKIA
0800 - SAMSUNG (0800-726 786)
www.samsung.com/sk
SPAIN
902 - 1 - SAMSUNG (902 172 678)
www.samsung.com
SWEDEN
0771 726 7864 (SAMSUNG)
SWITZERLAND
0848 - SAMSUNG(7267864, CHF 0.08/min)
www.samsung.com
www.samsung.com/ch
U.K
0330 SAMSUNG (7267864)
www.samsung.com/ch_fr (French)
www.samsung.com
EIRE
0818 717100
www.samsung.com
LITHUANIA
8-800-77777
www.samsung.com
LATVIA
8000-7267
www.samsung.com
ESTONIA
800-7267
www.samsung.com
TURKEY
444 77 11
www.samsung.com
AUSTRALIA
1300 362 603
www.samsung.com
NEW ZEALAND
0800 SAMSUNG (0800 726 786)
www.samsung.com
CHINA
400-810-5858
www.samsung.com
HONG KONG
(852) 3698-4698
www.samsung.com/hk
www.samsung.com/hk_en/
INDIA
INDONESIA
1800 1100 11
3030 8282
1800 3000 8282
1800 266 8282
0800-112-8888
021-5699-7777
www.samsung.com
www.samsung.com
www.samsung.com
JAPAN
0120-327-527
www.samsung.com
MALAYSIA
1800-88-9999
www.samsung.com
PHILIPPINES
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
www.samsung.com
SINGAPORE
1800-SAMSUNG(726-7864)
www.samsung.com
THAILAND
TAIWAN
VIETNAM
1800-29-3232
02-689-3232
0800-329-999
0266-026-066
1 800 588 889
www.samsung.com
www.samsung.com
www.samsung.com
© 2013 Samsung Electronics Co., Ltd. All rights reserved.
[HB670-XC]Install Guide-ENG.indd 59
2013-02-04 �� 3:11:29