advertisement
EN
Accessories
2015/2016
2
The icing on the cake
WINTERSTEIGER offers an extensive range of machine and workshop accessories with more that 1,200 products. Exact fulfilment of the customer‘s requirements, the highest possible quality and rapid availability are essential for product development:
The starting point for development of machines and the accompanying accessories is our intensive customer
service. We fulfil the latest customer requirements and offer a wide variety of product variants – so there is
something for everyone.
Quality is our first priority. For example, the new, high-grade WINTERSTEIGER waxes were developed in
collaboration with VOLA, a well-known French manufacturer.
More time for productivity. With the completion of our new logistics centre in 2012, products can be
stored efficiently in a total area of 7,500 m² and can be shipped quickly. Thus, you can get your
orders as quickly as possible and can always remain productive.
The right accessory is the icing on the cake. Take advantage of our many years of experience and choose from our comprehensive range of products for your success.
3
WINTERSTEIGER Worldwide
WINTERSTEIGER SpoRTS is the world market leader, providing complete service for skis and snowboards, storage and rental solutions. Ski and snowboards shops, rental stations, famous ski and snowboard manufacturers and national Ski Federations rely on WINTERSTEIGER‘s tailor-made system solutions and first-class service. The headquarters located in Austria, subsidiaries in Germany, France, Italy, Switzerland, USA, Canada, China and more than 20 representations throughout the world ensure a closely-knit sales network and global service. Customer service at WINTERSTEIGER quite simply means being served better and faster!
WINTERSTEIGER Headquarters
Ried im Innkreis / Upper Austria
4
GERMANY FRANCE ITALY
WINTERSTEIGER
Eging am See / Bavaria
SKID-WINTERSTEIGER
Ste Hélène zu lac / Savoie
WINTERSTEIGER
Badia / Bozen
SWITZERLAND
WINTERSTEIGER
Hünenberg / Zug
USA
WINTERSTEIGER
Salt Lake City / Utah
WINTERSTEIGER
Waitsfield / Vermont
CANADA
WINTERSTEIGER
Laval / Quebec
INTERNATIoNAL REpRESENTA TIoNS
ARGENTINA
FIDIA S.A.
“Centro Empresarial Urbana”,
Cazadores de Coquimbo 2841 –
Edificio 4 – 1ER.PISO. Vicente Lopez,
1640 Buenos Aires
Tel.: +54 11 5195 6020
Contact: Alejandro Marinac
E-Mail: [email protected]
CHINA
Melchers (Beijing) Ltd.
Beijing Tower Room 503-504,
No. 10, Chang An Avenue (East)
Beijing - 100006 / P.R. China
86 10 6525 7775
86 10 6512 3505 / 6524 04444
Contact: Josie Wang [email protected]
AUSTRALIA
ROSBERT INTERNATIONAL
(AUST) PTY. LTD.
209 Grange Road
AUS-Fairfield Vic 3078
Tel.: +61 3 9905 7711
Fax: +61 3 9486 3788
Contact: Trevor Browne
E-Mail: [email protected]
www.rosbert.com.au
BENELUX
KOLTEC SPORT EQUIPMENT B.V.
Postbus 9044
NL-3301 AA Dordrecht
+31 78 61 65 444
+31 78 62 15 755
Contact: Niels Kolbe e-mail: [email protected] www.koltecsport.com
CZECH REpUBLIC
SNOW-HOW CR s.r.o.
Zdebradska 56
CZ-251 01 Ricany-Jazlovice
Tel.: +420 323 6276 11
Fax: +420 323 6276 00
Contact: Tomas Sgalitzer
E-Mail: [email protected]
www.wintersteiger.cz
DENMARK
FUN SPORT
Sjaellandsgade 10
DK-7100 Vejle
Tel.: +45 757 2287 7
Fax: +45 757 2375 0
Contact: Henning Mathiasen
E-Mail: [email protected]
www.funsport.dk
BULGARIA
INFOSPORT OOD
# 22 Zlaten Rog. Str. / Floor 8, Office # 22
BG-1407 Sofia
Tel.: +359 296 2631 0
Fax: +359 296 2632 0
Contact: Stoyan Atanassov
E-Mail: [email protected]
www.infosport.bg
FINLAND
OY HUNTTERI AB
Lukkosepänkatu 4
FIN-20320 TURKU
Tel.: +358 207 9912 12
Fax: +358 207 9912 19
Contact: Juhani Laakso
E-Mail: [email protected]
www.huntteri.com
CHILE
EOLIA LTDA
Av. Las Condes 8606
RCH-Santiago
Tel.: +56 222 9409 3
Fax: +56 221 1437 9
Contact: Michel Bohuon
E-Mail: [email protected]
www.nautisport.cl
GREAT BRITAIN
ANYTHING TECHNICAL LIMITED
Sand Aire House, New Road
GB-Kendal/Cumbria LA9 4UA
Tel.: +44 153 9734 701
Fax: +44 153 9734 736
Contact: Pete Evans
E-Mail: [email protected]
www.skiequipmentuk.com
FINLAND
WS-SERVICE FINLAND
Kumpukatu 7-9 A 9
FIN- 70620 Kuopio
Tel.: +358 400 4678 89
Contact: Riku Jaakonsaari
E-Mail: [email protected]
HUNGARY
HEFA SPORT LTD.
Fenyves u. 21.
H-8200 Veszprém
Tel.: +36 8 859 1031
Fax: +36 8 842 2244
Contact: Gábor Mohos
E-mail: [email protected]
www.hefa.hu
RUSSIA
WINTERSTEIGER
Moscow
JApAN
SBA INC.
Aminaka Kudan Bldg.
1-14-17 Kudan-Kita
Chiyoda-Ku
J-TOKYO 102-0073
Tel.: +81 332 2168 81
Fax: +81 332 2214 57
Contact: Katsuhisa Ishikawa
E-Mail: [email protected]
www.sba-inc.co.jp
NEW ZEALAND
GRAVITY SPORTS IMPORTS
TANGLED WEB MARKETING LIMITED
51 School Road
West Eyreton, RD 5
NZ-Rangiora, 7475
Tel.: +64 331 2501 7
Fax: +64 331 2501 0
Contact: Geoff McKeown
E-Mail: [email protected]
www.gravitysports.co.nz
NoRWAY
BOARD & SKI TEKNIKK A/S
Boks 173
N-1556 Son
Tel.: +47 649 5959 5
Contact: Viggo Slang
E-Mail: [email protected]
www.wintersteiger.no
poLAND
IKATUR A. MALYSA SPÓLKA JAWNA ul. Zary 20
PL–32-031 Mogilany
Tel.: +48 12 444 50 60
Fax: +48 12 444 50 61
Contact: Andrzej Malysa
E-Mail: [email protected]
www.wintersteiger.pl
SLoVAKIA
SNOW-HOW CR s.r.o.
Zdebradska 56
CZ-251 01 Ricany-Jazlovice
Tel.: +420 323 6276 11
Fax: +420 323 6276 00
Contact: Tomas Sgalitzer
E-Mail: [email protected]
www.wintersteiger.cz
SoUTH KoREA
HIMAZONE
277-26 Inchang-Dong
Guri-Si
ROK-Gyeonggi-Do 471-832
Tel.: +82 315 66 2336
Fax: +82 315 66 2320
Contact: Soonho Kim
E-Mail: [email protected]
www.himazone.co.kr
SpAIN
MANUFACTURAS DEPORTIVAS
VIPER, S.A.
C/ de la Mora, 12
Pol. Ind. Granland-Badalona Sud
E-08918 Badalona
Tel.: +34 933 0046 00
Fax: +34 933 0091 19
Contact: Luis Fortún
E-Mail: [email protected]
www.viper-sport.com
SWEDEN
BOARD & SKI TEKNIKK A/S
Boks 173
N-1556 Son
Tel.: +47 649 5959 5
Contact: Viggo Slang
E-Mail: [email protected]
www.wintersteiger.no
RoMANIA
SPORTSGAMES srl
Str. Ovidiu Balea nr 57
RO-300620 Timisoara
+40 256 431 511
+40 256 491 301
Contact: Lucian Buduca e-mail: [email protected]
www.sportsgames.ro
SLoVENIA, CRoATIA, BoSNIA
HERZEGoVINA, MACEDoNIA,
SERBIA and MoNTENEGRo
VITA, MARKETING, TROGVINA
IN SPORT, TREBNJE, D.O.O.
Studenec 24
SLO-8210 Trebnje
Tel.: +386 73466325
Fax: +386 73045750
Contact: Peter Kovacic
E-Mail: [email protected] www.vita.si
SWEDEN
BOARD & SKI TEKNIKK A/S
Boks 173
N-1556 Son
Tel.: +47 649 5959 5
Contact: Viggo Slang
E-Mail: [email protected]
www.wintersteiger.no
Turkey
ESKAPI KAR SPORLARI TIC.LTD.STI.
Atatürk cad. Pıtrak sok 16/A A.Hisarı
34813 Istanbul, Turkey
Contact: Hakan Severge
+90 216 4657755
+90 216 4657590 e-mail: [email protected] www.proshoptr.com
ARGENTINA
FIDIA S.A.
“Centro Empresarial Urbana”,
Cazadores de Coquimbo 2841 –
Edificio 4 – 1ER.PISO. Vicente Lopez,
1640 Buenos Aires
Tel.: +54 11 5195 6020
Contact: Alejandro Marinac
E-Mail: [email protected]
AUSTRALIA
ROSBERT INTERNATIONAL
(AUST) PTY. LTD.
209 Grange Road
AUS-Fairfield Vic 3078
Tel.: +61 3 9905 7711
Fax: +61 3 9486 3788
Contact: Trevor Browne
E-Mail: [email protected]
www.rosbert.com.au
BENELUX
KOLTEC SPORT EQUIPMENT B.V.
Postbus 9044
NL-3301 AA Dordrecht
+31 78 61 65 444
+31 78 62 15 755
Contact: Niels Kolbe e-mail: [email protected] www.koltecsport.com
CHINA
Melchers (Beijing) Ltd.
Beijing Tower Room 503-504,
No. 10, Chang An Avenue (East)
Beijing - 100006 / P.R. China
86 10 6525 7775
86 10 6512 3505 / 6524 04444
Contact: Josie Wang [email protected]
CZECH REpUBLIC
SNOW-HOW CR s.r.o.
Zdebradska 56
CZ-251 01 Ricany-Jazlovice
Tel.: +420 323 6276 11
Fax: +420 323 6276 00
Contact: Tomas Sgalitzer
E-Mail: [email protected]
www.wintersteiger.cz
DENMARK
FUN SPORT
Sjaellandsgade 10
DK-7100 Vejle
Tel.: +45 757 2287 7
Fax: +45 757 2375 0
Contact: Henning Mathiasen
E-Mail: [email protected]
www.funsport.dk
BULGARIA
INFOSPORT OOD
# 22 Zlaten Rog. Str. / Floor 8, Office # 22
BG-1407 Sofia
Tel.: +359 296 2631 0
Fax: +359 296 2632 0
Contact: Stoyan Atanassov
E-Mail: [email protected]
www.infosport.bg
FINLAND
OY HUNTTERI AB
Lukkosepänkatu 4
FIN-20320 TURKU
Tel.: +358 207 9912 12
Fax: +358 207 9912 19
Contact: Juhani Laakso
E-Mail: [email protected]
www.huntteri.com
CHILE
EOLIA LTDA
Av. Las Condes 8606
RCH-Santiago
Tel.: +56 222 9409 3
Fax: +56 221 1437 9
Contact: Michel Bohuon
E-Mail: [email protected]
www.nautisport.cl
GREAT BRITAIN
ANYTHING TECHNICAL LIMITED
Sand Aire House, New Road
GB-Kendal/Cumbria LA9 4UA
Tel.: +44 153 9734 701
Fax: +44 153 9734 736
Contact: Pete Evans
E-Mail: [email protected]
www.skiequipmentuk.com
FINLAND
WS-SERVICE FINLAND
Kumpukatu 7-9 A 9
FIN- 70620 Kuopio
Tel.: +358 400 4678 89
Contact: Riku Jaakonsaari
E-Mail: [email protected]
HUNGARY
HEFA SPORT LTD.
Fenyves u. 21.
H-8200 Veszprém
Tel.: +36 8 859 1031
Fax: +36 8 842 2244
Contact: Gábor Mohos
E-mail: [email protected]
www.hefa.hu
JApAN
SBA INC.
Aminaka Kudan Bldg.
1-14-17 Kudan-Kita
Chiyoda-Ku
J-TOKYO 102-0073
Tel.: +81 332 2168 81
Fax: +81 332 2214 57
Contact: Katsuhisa Ishikawa
E-Mail: [email protected]
www.sba-inc.co.jp
NEW ZEALAND
GRAVITY SPORTS IMPORTS
TANGLED WEB MARKETING LIMITED
51 School Road
West Eyreton, RD 5
NZ-Rangiora, 7475
Tel.: +64 331 2501 7
Fax: +64 331 2501 0
Contact: Geoff McKeown
E-Mail: [email protected]
www.gravitysports.co.nz
NoRWAY
BOARD & SKI TEKNIKK A/S
Boks 173
N-1556 Son
Tel.: +47 649 5959 5
Contact: Viggo Slang
E-Mail: [email protected]
www.wintersteiger.no
poLAND
IKATUR A. MALYSA SPÓLKA JAWNA ul. Zary 20
PL–32-031 Mogilany
Tel.: +48 12 444 50 60
Fax: +48 12 444 50 61
Contact: Andrzej Malysa
E-Mail: [email protected]
www.wintersteiger.pl
SLoVAKIA
SNOW-HOW CR s.r.o.
Zdebradska 56
CZ-251 01 Ricany-Jazlovice
Tel.: +420 323 6276 11
Fax: +420 323 6276 00
Contact: Tomas Sgalitzer
E-Mail: [email protected]
www.wintersteiger.cz
SoUTH KoREA
HIMAZONE
277-26 Inchang-Dong
Guri-Si
ROK-Gyeonggi-Do 471-832
Tel.: +82 315 66 2336
Fax: +82 315 66 2320
Contact: Soonho Kim
E-Mail: [email protected]
www.himazone.co.kr
SpAIN
MANUFACTURAS DEPORTIVAS
VIPER, S.A.
C/ de la Mora, 12
Pol. Ind. Granland-Badalona Sud
E-08918 Badalona
Tel.: +34 933 0046 00
Fax: +34 933 0091 19
Contact: Luis Fortún
E-Mail: [email protected]
www.viper-sport.com
SWEDEN
BOARD & SKI TEKNIKK A/S
Boks 173
N-1556 Son
Tel.: +47 649 5959 5
Contact: Viggo Slang
E-Mail: [email protected]
www.wintersteiger.no
RoMANIA
SPORTSGAMES srl
Str. Ovidiu Balea nr 57
RO-300620 Timisoara
+40 256 431 511
+40 256 491 301
Contact: Lucian Buduca e-mail: [email protected]
www.sportsgames.ro
SLoVENIA, CRoATIA, BoSNIA
HERZEGoVINA, MACEDoNIA,
SERBIA and MoNTENEGRo
VITA, MARKETING, TROGVINA
IN SPORT, TREBNJE, D.O.O.
Studenec 24
SLO-8210 Trebnje
Tel.: +386 73466325
Fax: +386 73045750
Contact: Peter Kovacic
E-Mail: [email protected] www.vita.si
SWEDEN
BOARD & SKI TEKNIKK A/S
Boks 173
N-1556 Son
Tel.: +47 649 5959 5
Contact: Viggo Slang
E-Mail: [email protected]
www.wintersteiger.no
Turkey
ESKAPI KAR SPORLARI TIC.LTD.STI.
Atatürk cad. Pıtrak sok 16/A A.Hisarı
34813 Istanbul, Turkey
Contact: Hakan Severge
+90 216 4657755
+90 216 4657590 e-mail: [email protected] www.proshoptr.com
Contents
TUNING TooLS
Tools and Instructions to maintain your equipment
WoRKSHop ACCESSoRIES
Work Benches and Accessories
Binding, Mounting and Repair
Base Repair
Edge Care
Wax Material and Accessories
Workshop Accessories
BooT FITTING AND ACCESSoRIES
Ultracam Universal Boot Fitting Machines and Accessories
MACHINERY pRoGRAM
Overview Machinery Program
MACHINE ACCESSoRIES
Compressors
Accessories for Base Repair Machines
Accessories for Grinding Machines
Accessories for Waxing Machines
Accessories for Binding Adjusting Machines
Skate Grinding Machine and Accessories
ACCESSoRIES FoR EASYRENT RENTAL SoFTWARE
Customer Cards, Barcode Labels and Printer Accessories
RENTAL , SToRAGE AND DRYING SYSTEMS
Easystore Flex Storage and Drying Systems
Easystore Shop Systems
Easystore Storage Lockers
Easystore Disinfection / Deodorisation pRoMoTIoNAL MATERIAL
Apron, Anti-Theft – Device, Ski Clip, Ski Zip, Tip Cover
pRoDUCT INDEX
Specific Product Overview
oRDER FoRMS
6 - 14
15 - 20
21 - 28
28 - 34
36 - 42
42 - 48
48 - 49
52 - 55
56 - 59
60
61
62 - 99
100 - 104
105 - 108
109 - 111
112 - 113
114 - 117
119
119
120 - 121
124 - 125
126 - 127
129 - 130
8
9
10
1
2
6
7
3
4
5
5
1
WINTERSTEIGER TUNING TOOLS
The WINTERSTEIGER retail program features tools and information for the consumer to maintain their equipment between shop visits. The more the consumer is educated about properly tuned equipment, the more shop visits they will make during the season. WINTERSTEIGER Ski and
Snowboard Tuning Tools are the perfect solution for the do-it-yourselfer who wants to keep their skis and snowboards in top notch condition between visits to your WINTERSTEIGER repair shop.
Not only are we offering the highest quality tools, we also offer displays and packaging that tie the product line back to your repair shop. Our complete line of hand tools allow your customers to wax, repair minor base damage, and keep their edges sharp and smooth. Detailed product use and consumer information about the need for tuning is available online at our consumer based web site www.tuneyourskisandboards.com.
All retail products have EAN-codes on the packaging.
Ski Vise SpoRT pLUS
Sturdy, high-tensile aluminium vise for tuning all types and
shapes of skis. The Vise SPORT PLUS is a very easy to use for tuning all types and shapes of skis. Features sturdy high tensile aluminum and is light and easy to transport. The holding system keeps the ski secure for base and side edge work. Includes 2 brake retainers. (packaged for retail). NEW: this vise allows also a 60° positioning of the skis for fast and simple edge tuning.
57-401-014
Ski Vise pRo - Wide opening
Multipurpose vise for all types of skis from 25 to 155 mm width at
waist. For use when maximum holding power is needed. The Ski Vise
Pro Wide Opening has jaws with 90 mm of holding surface and is built to withstand heavy use. The holding frame includes shelfless jaws that will hold any shape sidewall and can accommodate riser plates.
The adjustable guide blocks include the locking spindle. This feature allows the ski to be held sideways for edge and sidewall work without interference from the holding vise. (packaged for retail)
57-401-225 Jaw Width 90 mm; Jaw Opening 38/150 mm;
High Tensile Aluminum Body; Rubber Lined Jaw
6
Ski Vise RACING
Heavy Duty, high-tensile aluminium vise for tuning skis.
The holding frame includes shelf less jaws that will hold any shape sidewall and can accommodate riser plates.
NEW: this vise allows also a 60° positioning of the skis for fast and simple edge tuning.
57-401-020 Jaw Width 70 mm; Jaw Opening 28/90 mm;
High Tensile Aluminum Body; Rubber Lined Jaw
Board/ Freeride Stopper
Sturdy universal vise for tuning snowboards and wide skis.
This vise comes with a high-impact plastic body and a special rubber grip top that holds the snowboard extremely well for flat filing and waxing. For two side edge positions: standard 90° and easy 60°.
Suitable for all kinds and shapes of skis and snowboards. Binding clearance: 160 mm
57-401-025
NEW
Brake Retainer
To fix the ski brakes in upper position.
A Universal Ski Brake Retainer with more flex that works with all bindings. This specially formulated rubber compound is tough, long lasting with 100% elongation.
57-440-003 4 pcs.
Flatness Tester
15 cm x Ø 1.27 cm true bar
To .0005 tolerance heat treated and black oxide treated.
Place the true bar on the base in the tip, under the binding, and on the tail to check for flatness, by looking for light under the true bar in the middle or by the edges.
57-203-201 www.tuneyourskisandboards.com
7
1
1
WINTERSTEIGER TUNING TOOLS
ERGo RAZoR Sidewall planer
To remove sidewall material.
The ERGO RAZOR Sidewall Planer is essential for preparation of side edge filing. It is very important to remove the sidewall material to avoid loading files with plastic and to keep the sidewall from interfering with the bevel on the edge. It is adjustable and can be used with both the right and left hands. It comes with a round cutting blade.
57-401-100
Discman 2
The mobile grinding tool for side edge and base edge tuning of
skis & Snowboards. With grinding disc, rechargeably battery, battery charger and tools for changing the disc.
NEW: For base edge tuning the optional base edge tuning attachment art.no. 55-100-680 is needed. With an optional external transformer the
Discman device can also be used with power cord from now on.
Look at page 40/41 for a more detailed description of this tool.
55-100-650
55-100-641
55-100-660 battery operated Discman with battery charger 230 V / 18 V battery operated Discman with battery charger 110 V / 18 V corded Discman with external transformer 230 V / 50 Hz
Aluminium Side Edge File Guides
These anodized aluminium file guides are the perfect choice for
the home tuner. Each guide is milled with a channel in the corner to allow fillings to fall away from the base. Tools can be used with most files or abrasive stones.
57-401-300
57-401-301
57-401-302
57-401-303
90°
89°
88°
87°
Adjustable BASE EDGE File Guide
To bevel the base edge from 0.5 to 1.5 degree.
This base edge file guide uses the same quality in design and materials as the 55-500-092 and 55-500-093 (page 19). The new design allows for the adjustment of the base edge from 0.5 to 1.5 of bevel.
57-401-112 0.5° - 1.5°
8
pRo SHARp RACE File Guide
This updated professional side edge sharpener gives very accurate
bevels from 90 o 85 degrees. A larger knob allows adjustment to one of the 6 possible positions without the need of a screwdriver. Innovative arrow pattern allows waste material to fall free of the base without damage and reduces friction. Accepts files, stones, and diamond stones up to 6 mm thick and comes with a 80mm ICECUT file.
57-401-030 90° - 85°
RACING SHARp
Ergonomic design side and base edge sharpener (for 89° to 86° side
edge bevel and 0.5° and 1° base edge bevel). Packaged for retail.
57-401-145 Including File tool
RACING SHARp KIT
Ergonomic design side and base edge sharpener (89° to 86° side
edge bevel and 0.5° and 1° base edge bevel). Packaged for retail.
57-401-146 Including Zirconium, File and Diamond tool
Replacement File
57-401-173 Replacement Zirconium File
57-401-174 Replacement File 80 mm
55-500-108 Replacement Diamond file www.tuneyourskisandboards.com
9
1
1
WINTERSTEIGER TUNING TOOLS
QUICK SHARp File Guide
Side edge sharpener for 89 - 88 degrees.
The plastic molded tools are easy to use and carry on the hill.
Packaged for retail.
Quick Sharp File Guide
57-401-161 Including File tool
Quick Sharp EXTRA File Guide
57-401-163 Including Zirconium, File and Diamond tool
Replacement File
55-500-107 Replacement Zirconium File
55-500-106
55-500-108
Replacement File 40 mm
Replacement Diamond file
Mill Bastard File
High quality file for sharpening side and base edge.
These are not the low quality files traditionally associated with retail sales. These are the same files used by World Cup service technicians and service shops around the world. Guaranteed for their quality and straightness, these are the best files you will find for the money.
55-500-135 Hard Chrome File, 150 mm
ICECUT professional File
Super chromed file for accurate bevelling and extended life.
Used by World Cup technicians because of the precision cut teeth and comfortable tangless design. ICECUT files are also the straightest file available for accurate beveling and have one of the highest Rockwell hardness for extended life.
55-500-046
55-500-047
150 mm
200 mm
10
Diamond File
For edge finishing. Best used with water.
57-401-210
57-401-211
57-401-212
Grit 600, Fine, 70 mm
Grit 400, Medium, 70 mm
Grit 200, Coarse, 70 mm
57-401-220
57-401-221
57-401-222
Grit 600, Fine, 100 mm
Grit 400, Medium, 100 mm
Grit 200, Coarse, 100 mm
File Brush / Card
To clean debris from the teeth of files.
57-200-050 pocket Stone
For quickly remove minor burrs and imperfections on edges.
57-200-102
Citrus Base Cleaner
For removing grease, adhesives and for cleaning.
57-202-603 0.5 lt.
www.tuneyourskisandboards.com
11
1
1
WINTERSTEIGER TUNING TOOLS
Drip Candles
Base repair material for repairing scratches and damage to the base on skis and snowboards.
57-440-001
57-440-002
Black, 3 pcs.
Clear, 3 pcs.
Metal Scraper
To remove excess repair material from the base.
55-240-457 130 x 60 x 0.7 mm
Wax Iron
High quality wax iron for skis and snowboards.
Fine tuned thermostat reduces temperature fluctuations and a thick metal base holds heat to prevent damage during waxing.
57-100-290 240 V / 50 Hz, 800 W
Easy Liquid Wax
Application is as easy as rub-on, buff off, GO! 50 ml bottle with built-in sponge applicator. Environmentally friendly formula.
57-440-109 50 ml, Easy Wax Liquid
12
Easy Wax Rub-on Set
Paraffin based rub-on wax that is suitable for a wide range of snow types and temperatures. Includes 57 g of wax and buffing pad.
57-440-105 57 g box and buffing pad
WINTERSTEIGER Slik Wax
Slick‘s smaller crystalline structure is designed to penetrate the new harder ski and snowboard bases.
57-440-100
57-440-101
57-440-102
57-440-103
57-440-104
57-440-108
Green, for extremely cold snow, 85 g
Blue, for cold snow, 85 g
Red, for warm snow, 85 g
Yellow, for warm and wet snow, 85 g
Universal, 85 g
Graphite / Graphite, 85 g
Race Service plastic Scraper Sharpener
This new plastic scraper sharpener is designed to meet the needs of race service personal and service techs. The tall side hold the plastic scraper in the perfect upright position while the large base provide a stable base to hold the tool. The plastic is removed by a replaceable
100 mm file and requires no adjustment to the blade.
57-203-430 plexi Scraper
To remove cooled wax from the base.
55-200-013
55-200-015
Flexible, 130 x 60 x 3 mm
Stiff, 320 x 70 x 5 mm
13
1
WINTERSTEIGER TUNING TOOLS
1
Wax Buffing pad
Used to remove excess wax from the structure.
57-440-010 220 x 150 mm
14
1
2
3
Soft Red Gummi Stone
For fine buffing and polishing on the edge.
Starting at the tip of the ski / board, the gummi stone should be run at a 45 degree angle for up to 10 to 20 cm past the contact point.
Making multiple passes, reducing the length of the stroke each time, feather the edge from the tip to the set bevels. Run the gummi stone from tip to tail to deburr and repeat the detune process in the tail.
57-420-242 40 x 20 x 65 mm
1
Bronze Base Brush
Stiff brush for cleaning out wax before applying hot wax and
exposing the structure. Includes Hang Tag for retail display.
55-500-077
2
Nylon Wax Brush
Stiff nylon bristle brush for perfect wax texturing.
Includes Hang Tag for retail display.
55-500-016
3
Horse Hair Wax Brush
High-quality horsehair brush to expose the base texture.
Includes Hang Tag for retail display.
55-500-078
2
6
3
4
WORKSHOP ACCESSORIES
Workbenches and Accessories
*
NEW
The articles 55-125-181, 55-125-182,
55-125-183, 55-125-184, 55-125-185 and
55-125-186 only fit to the new upper frame art.no. 55-125-180 as of 2014.
Multi-Functional Work Bench
1
Work Bench Frame
Adjustable height (80 – 95 cm), incl. beechwood plate.
55-125-100 Worktop: 1500 x 750 x 40 mm (L x W x H) only suitable for workbenches as from 2014
7
5
2
Upper Frame *
For fixing of top frame and perforated plates.
55-125-180 W = 1.357 mm
7
3
Top Frame *
Incl. 1 guide rail 1.350 mm, 2 idler rollers and 1 pair of stopper.
55-125-181 8 only suitable for workbenches as from 2014 only suitable for workbenches as from 2014
1
4 optional Guide Rail *
Including 1 pair of stopper, to equip the top frame with 2 guide rails.
55-125-182 L = 1.350 mm only suitable for workbenches as from 2014 5
Lighting System *
Incl. 2 flourescent lamps.
55-125-183 2 x 36 W, for upper frame art.no. 55-125-180
The double ski and snowboard vise
(Art.No. 7050-02-00) and the adjustable rests (Art.No. 7070-02-00) mounted on the worktop are not included with the workbench frame. You find these products on page 20 in this catalog. In accordance with above picture, the perforated sheet metal plate (Art.No. 55-125-185) may mounted twice onto the upper frame.
This enables more possitilities to place the various holding devices – see page 16.
6 power Supply *
Incl. 3 sockets, on-off switch and fixing clamps.
55-125-184 with supply cable 230 V, 3 m
7 perforated plate *
55-125-185 1.350 x 240 mm (L x H) only suitable for workbenches as from 2014 only suitable for workbenches as from 2014 only suitable for workbenches as from 2014 8
Metal Trays *
Set with 2 shelves for attachment to the perforated plates.
55-125-186 900 x 250 mm, 450 x 250 mm (L x H)
9
9
Drawer Cabinet *
Optional drawer cabinet for attachment to the underside of the worktop.
With 2 lockable full-extension drawers.
55-125-187 525 x 525 x 400 mm (L x W x H) www.wintersteiger.com
15
2
2
WORKSHOP ACCESSORIES
Workbenches and Accessories
6
2
8
5
9
3
1
4
7
10
Holding Devices for multi-functional Work Bench
1
Holder
For electronic drill or screw-driver.
55-125-146
55-125-153
Ø 40 mm
Ø 80 mm
2
Drill Holder for 13 units
55-125-156 L = 225 mm
3
Tool Holder with double hook
Box with 5 pcs.
55-125-154 L = 100 mm
4
Tool Holder with single hook
Box with 5 pcs.
55-125-155 L = 100 mm
5
Flexible Tool Holder
Clamp support for universal use.
55-125-158 For Ø 15 - 25 mm
6
Tool Holder
For 6 screw drivers.
55-125-150 L = 190 mm
7
Tool Holder
For 13 units.
55-125-147 L = 300 mm
8 Tray
55-125-151 225 x 175 x 65 mm
9
Tray
55-125-152 450 x 170 mm
10
Retaining Rail with 10 Small Parts Boxes
Set mit 1 support rail L = 1.298 mm and 10 Boxen
130 x 198 x 90 mm (W x D x H).
55-125-188 1.298 x 265 x 90 mm
Only suitable for workbenches as from 2014 NEW
16
2
3
1
WORKSHOP ACCESSORIES
Workbenches and Accessories
1
Balancer
With metal housing, easy adjustable.
55-100-250 1 - 2 kg
2
Balancer
Competitive priced balancer with plastic housing and
WINTERSTEIGER label, easy adjustable.
55-100-248 1 - 2 kg
3
Magnetic Tool Holder
55-100-180 L = 350 mm
2
Moveable Drawer Cabinet
With 2 drawers H = 150 mm each and 2 shelves incl. rubber mat.
55-125-170 65 x 71 x 79 cm (L x W x H)
Rubber Workshop Mat
56-300-100
56-300-120
80 x 60 cm, closed bottom side
80 x 60 cm, open bottom side www.wintersteiger.com
17
2
WORKSHOP ACCESSORIES
Workbenches and Accessories
Clean-Up Paper Roll
77-600-150 approx. 1000 sheets
Paper-Roll Holder
(without paper)
7019-01111-V2
Wall Mounted Paper-Roll Holder
(without paper)
7019-01111-V1
TORK Premium Cleaning Cloth
Nonwoven cleaning cloth for versatile and flexible use, with high suction power and tensile strength, very well suited for applications with oil, grease and grinding emulsion.
56-300-020 38 x 43 cm, 140 pcs.
TORK Dispenser for Wall Mounting
For 1 bag = 140 pcs. premium cleaning cloths.
56-300-025 413 x 220 x 200 mm (L x W x H)
Hand Cleaning Wipes
Useable without water, 36 pcs. box.
56-300-010
Service- / Waxbench
Adjustable height, fully galvanized, stable construction, collapsible.
55-100-601 Waxbench 120 x 50 x 80 cm (L x W x H)
(without ski vise)
55-100-602 Optional Upper Frame to hold 2 pairs of skis
18
WORKSHOP ACCESSORIES
Workbenches and Accessories
Ski Vise Pro Wide Opening
For use when maximum holding power is needed. The Ski Vise Pro Wide
Opening has jaws with 90 mm of holding surface and is built to withstand heavy use. The holding frame includes shelfless jaws that will hold any shape sidewall and can accommodate riser plates. The adjustable guide blocks include the locking spindle. This feature allows the ski to be held sideways for edge and sidewall work without interference from the holding vise. (packaged for retail)
57-401-225 Jaw Width 90 mm; Jaw Opening 38/155 mm;
High Tensile Aluminum Body; Rubber Lined Jaw
Ski Vise BACKSHOP
Great shop vise for alpine and cross country skis as well as snowboards.
The supports include a vise to hold both skis and boards tightly while working on side edges.
55-500-057 70 mm Jaw Opening for skis,
270 mm Jaw Opening for Snowboards
2
Ski Vise RACING
Heavy Duty, high-tensile aluminium vise for tuning skis.
The holding frame includes shelf less jaws that will hold any shape sidewall and can accommodate riser plates.
NEW: this vise allows also a 60° positioning of the skis for fast and simple edge tuning.
57-401-020 Jaw Width 70 mm; Jaw Opening 28/90 mm;
High Tensile Aluminum Body; Rubber Lined Jaw
Cross Country Support Plus
The Cross Country Support Plus attaches to the adjustable guide block of the Ski Vise RACING. It gives more support to cross country skis during tuning.
55-500-054
Ski Vise SPORT PLUS
Sturdy, high-tensile aluminium vise for tuning all types and
shapes of skis. The Vise SPORT PLUS is a very easy to use for tuning all types and shapes of skis. Features sturdy high tensile aluminum and is light and easy to transport. The holding system keeps the ski secure for base and side edge work. Includes 2 brake retainers. (packaged for retail).
NEW: this vise allows also a 60° positioning of the skis for fast and simple edge tuning.
57-401-014 www.wintersteiger.com
19
2
WORKSHOP ACCESSORIES
Workbenches and Accessories
Board/ Freeride Stopper
Sturdy universal vise for tuning snowboards and wide skis.
This vise comes with a high-impact plastic body and a special rubber grip top that holds the snowboard extremely well for flat filing and waxing.
For two side edge positions: standard 90° and easy 60°. Suitable for all kinds and shapes of skis and snowboards. Binding clearance: 160 mm
57-401-025
NEW
1
2
4
3
DSP Double Ski and Snowboard Vise
Wider model for repairings of 30 - 150 mm wide skis (in the binding area) and snowboards up to 400 mm width.
1 7050-02-00 Vise only, rests sold separately
VA Adjustable Rests
250 mm wide edition with rubber coated guide blocks for side edge tuning.
2 7070-02-00 250 mm wide
Spare Clamp Lever and Sliding Plate
Replacement parts for adjustable rests if the handle strips out.
3
4
43-100-460 Handle used to secure adjustable rest (male end)
7070-0111-003 Screw plate that the handle threads into (female end)
SSPV Adjustable Mounting Vise for Skis
The fastest vise for mounting bindings. Wider model for skis up to a width of 190 mm.
7080-402
20
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
FEIN Electronic Screw-Driver
With continuously variable rotaton speed, clockwise and counter-clockwise rotation, including spiral cable and hanger; 230 V / 230 Watt.
55-100-400
Expanding Spiral Cable
15-209-100
2
FEIN Electronic Drill
Electronic controlled drilling machine with clockwise and anti-clockwise operation. An integrated spindle lock and single sheath metal quick clamping drill chuck allow tools to be quickly and easily changed with just one hand. Including spiral cable and hanger.
55-100-300 230 V / 500 W, 1.7 kg
Expanding Spiral Cable
15-209-100
FEIN Cordless Drill 14.4V
Incl. keyless chuck, two lithium-ion batterys 2 Ah, rapid charger, wrist strap,
2 bits and plastic tool case, friction clutch adjustable in 10 steps (level 1-9 for screwing, level 10 for drilling), right and left rotation.
55-100-380 1.8 kg, 450/1600 rpm.
FEIN Spare Battery
55-100-384
55-100-381
55-100-382
14.4 V
12 V
9.6 V
FEIN Replacement Charger 12 V
55-100-383
NEW www.wintersteiger.com
21
2
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
Snowboard Multi-Set
This set includes:
1 Snowboard drill 110°
1 Gauge drill
10 Multi inserts 7 mm
10 Multi inserts 9 mm
5 Countersink screws M6 x 16
5 Countersink screws M6 x 20
5 Roundhead screws M6 x 16
5 Roundhead screws M6 x 20
10 Brass inserts to strike
10 Alpine / XC-Screws M5.5 x 13 mm
55-200-019
Snowboard Multi-Inserts
55-200-025
55-200-035
55-200-036
7 mm – Ø M6 (50 pcs.), different colours
7 mm – Ø M6 (50 pcs.), transparent
7 mm – Ø M6 (50 pcs.), black
55-200-026
55-200-037
55-200-038
9 mm – Ø M6 (50 pcs.), different colours
9 mm – Ø M6 (50 pcs.), transparent
9 mm – Ø M6 (50 pcs.), black
Snowboard Drill 110°
55-200-020
Binding Drill Set
Set with 10 binding drills:
2 pcs. 3.5 x 7 mm
1 pc. 3.5 x 9 mm
1 pc. 3.5 x 15 mm
1 pc. 3.6 x 9 mm
1 pc. 3.6 x 14.5 mm
1 pc. 4.1 x 7 mm
2 pcs. 4.1 x 9 mm
1 pc. 4.1 x 11 mm
55-100-337
22
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
Binding Drill
Child skis
55-100-315
55-100-316
55-100-322
3.5 x 7 mm
3.5 x 9 mm
3.5 x 9.5 mm
Cross-country skis
55-100-314 3.6 x 14.5 mm
55-100-317
55-100-318
3.5 x 15 mm
3.8 x 15 mm
Alpin and carving skis
55-100-313
55-100-310
3.6 x 6.5 mm
3.6 x 9 mm
55-100-311
55-100-312
55-100-319
55-100-323
3.6 x 7 mm
3.6 x 7.5 mm
3.8 x 9 mm
3.8 x 11 mm
55-100-321
55-100-324
55-100-320
55-100-328
55-100-330
55-100-329
55-100-339
55-100-332
4.0 x 7 mm
4.0 x 9 mm
4.1 x 7 mm
4.1 x 7.5 mm
4.1 x 9 mm
4.1 x 9.5 mm
4.1 x 11 mm
4.2 x 11 mm
Alpine and Carving skis with binding plates
55-100-333
55-100-334
4.6 x 10 mm
4.6 x 11.5 mm
Binding Drill
With special coating for alu binding plates.
55-100-338
55-100-335
4.1 x 9 mm with TIN-coating
4.6 x 11.5 mm ISOTIn, with continous spiral
Multi Gauge Drill
For alpin and carving skis with hard binding plates.
55-100-336 3.3 / 4.1 x 11 mm
2
Bit
55-100-430
55-100-440
55-100-450
55-100-460
55-100-461
Pozidrive 25 mm, size 2
Pozidrive 25 mm, size 3
Philips 25 mm, size 3
Torx 25, L = 25 mm
NEW!
Torx 20, L = 25 mm
Straight Slot
55-100-425 25 mm www.wintersteiger.com
23
2
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
3
1
2
1
Screwdriver Bit
Screwdriver Bit for FEIN screw driver 55-100-400.
55-100-470
55-100-475
55-100-480
55-100-485
55-100-486
55-100-487
55-100-488
Pozidrive 100 mm, size 2
Pozidrive 120 mm, size 2
Pozidrive 100 mm, size 3
Pozidrive 120 mm, size 3
Pozidrive 150 mm, size 3
NEW!
Torx 20, L = 100 mm
NEW!
Torx 25, L = 120 mm
2
Screwdriver Bit
Hexagonal.
55-100-490
55-100-495
55-100-496
55-100-497
Pozidrive 120 mm, size 2
Pozidrive 120 mm, size 3
NEW!
Torx 20, L = 100 mm
NEW!
Torx 25, L = 120 mm
3
Magnetic Bit Holder
For the magnetization of 25mm long bits.
55-100-409 Hexagonal
Bit Holder
For pozidrive, philips and straight bits.
55-100-405
3
2
1
Screwdriver
With hexagonal bolster for a wrench attachment.
3
3
1
1
2
2
55-500-006 Pozidrive, size 2
55-500-007 Pozidrive, size 3
55-500-080 Philips, size 2
55-500-081
55-500-082
55-500-083
Philips, size 3
NEW!
NEW!
Torx 20
Torx 25
Standard Screwdriver Set
With hexagonal bolster for a wrench attachment.
55-500-005 Straight slot, size 6.5 / 8 / 10 mm
24
3
2
1
2
1
Hollow Drill Bit
For drilling out broken ski binding screws.
55-530-403 L = 75 mm, Ø = 8 mm
2 Gauge Drill
55-100-351 Ø = 8 mm
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
2
1
4
1 Plastic Inserts to strike
To be driven in, Ø = 8 mm.
55-530-416 100 pcs.
2 Brass Inserts to strike
55-530-405 100 pcs.
3 Brass Inserts to be screwed in
55-530-406 L = 8 mm, 100 pcs.
55-530-407
55-530-411
L = 9 mm, 100 pcs.
L = 9 mm, 100 pcs., for plastic binding plates
55-530-408 L = 11 mm, 100 pcs.
4
Screwdriver for Brass Inserts
55-530-409 www.wintersteiger.com
25
2
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
Screws Set Snowboard
Set with 200 screws consists of:
Each 20 pcs. countersink screws M6 x 10, 12, 16, 20, 25 mm each 20 pcs. roundhead screws M6 x 10, 12, 16, 20, 25 mm
55-200-120
Snowboard Screws
Countersink screws and roundhead screws (packages with 50 pcs.).
55-200-121
55-200-122
55-200-123
55-200-124
55-200-127
55-200-128
55-200-129
50 countersink screws M6 x 10 mm
50 countersink screws M6 x 12 mm
50 countersink screws M6 x 16 mm
50 countersink screws M6 x 20 mm
50 roundhead screws M6 x 12 mm
50 roundhead screws M6 x 16 mm
50 roundhead screws M6 x 20 mm
Screws Set Alpin
Set with 300 screws consists of: 50 pcs. 5.5 x 9.5, 50 pcs. 5.5 x 11.5,
50 pcs. 5.5 x 13, 50 pcs. 5.5 x 15, 50 pcs. 5.5 x 16,
50 pcs. 6.2 x 17.5, 1 pc. binding glue 25 ml
55-200-100
Alpine / XC-Screws
55-200-105
55-200-106
55-200-107
55-200-108
55-200-109
55-200-111
55-200-112
55-200-113
55-200-110
100 screws M5.5 x 9.5 mm
100 screws M5.5 x 11.5 mm
100 screws M5.5 x 13 mm
100 screws M5.5 x 15 mm
100 screws M5.5 x 16 mm
100 screws M5.5 x 18 mm
100 screws M5.5 x 21.5 mm
100 screws M5.5 x 28 mm, Cylinder head
100 screws M6.2 x 17.5 mm
26
WORKSHOP ACCESSORIES
Binding, Mounting and Repair
Wooden Plugs
55-530-410 100 pcs.
Binding Glue
55-530-290 100 ml
Hole Plug Kit
Approx. 3000 hole plugs in 18 different colours.
55-530-431
Plastic Plugs
55-530-430 Different colours, 500 pcs.
55-530-432 White, 500 pcs.
55-530-433 Red, 500 pcs.
55-530-434 Yellow, 500 pcs.
55-530-435 Blue, 500 pcs.
55-530-436 Grey, 500 pcs.
55-530-437 Black, 500 pcs.
2
Plastic Plugs
50 pcs. on bars.
55-530-420 Yellow
55-530-421 Red
55-530-422 Blue
55-530-423 Green
55-530-424 Black
55-530-425 Grey
55-530-426 White
55-530-427 Transparent
Binding Spray
55-530-300 300 ml www.wintersteiger.com
27
2
WORKSHOP ACCESSORIES
Binding, Mounting and Repair / Base Repair
Long Brake Retainers
100 pairs per box.
56-400-114
56-400-118
Natural Coloured
Blue Coloured
Short Brake Retainers
100 pairs per box.
56-400-110 Green coloured
Heating Plate
55-530-111
55-530-115
240 V / 50 Hz
110 V / 60 Hz
Clamp
For heating plate.
55-530-112
Base Repair Set
With binding glue, silicone paper, sinteret base material:
White, transparent and black, 1 m each
1 pc. punch rectangular, 1 pc. punch oval,
1 pc. punch semi-circular,
1 pc. heating plate, 1 pc. clamp
55-530-101
55-530-102 with Heating Plate 240 V / 50 Hz with Heating Plate 110 V / 60 Hz
28
WORKSHOP ACCESSORIES
Base Repair
Punch 55-530-126
Spare blade 55-530-136
Punches
55-530-105
55-530-106
55-530-107
55-530-126
55-530-122
55-530-127
55-530-129
55-530-123
Rectangular
Oval
Semi-circular
Circular, big
Oval, small, closed
Oval, big, closed
Oval, small, open
Oval, big, open
Spare Blade for punches
55-530-134
55-530-131
55-530-135
55-530-138
55-530-136
55-530-132
55-530-137
55-530-139
55-530-133
Rectangular
Oval
Semi-circular
Circular, small
Circular, big
Oval, small, closed
Oval, big, closed
Oval, small, open
Oval, big, open scale 1:1
Punch 55-530-107
Spare blade 55-530-135
Punch 55-530-127
Spare blade 55-530-137
Punch 55-530-106
Spare blade 55-530-131
Punch 55-530-105
Spare blade 55-530-134
Punch 55-530-122
Spare blade 55-530-132
2
Punch 55-530-123
Spare blade 55-530-133
Punch 55-530-129
Spare blade 55-530-139 www.wintersteiger.com
29
2
30
WORKSHOP ACCESSORIES
Base Repair
Hammer
For punching.
55-530-114
Chisel
55-530-140
55-530-150
55-530-155
500 g
25 mm
16 mm
8 mm
Punch Plate
55-530-113
ARALDIT 2-Part-Adhesive
55-530-280 2 x 140 ml
TECHNICOLL 2-Part-Adhesive
55-530-285 2 x 65 g
ARALDIT 2-Part-Expoxy Glue
For a more comfortable use of the 2-part-Epoxy glue, these syringe dispensers can be used with a syringe gun. With a mixing nozzle, the 2-Part-Epoxy is ready for use right away.
Dispenser 2012 / 50 ml fast hardening
55-530-340 Work time: 4 min., Handling strength: 20 min.
Dispenser 2011 / 50 ml slow hardening
55-530-341 Work time: 1 ¾ hours, Handling strength: 7 hours
Mixing nozzles for dispenser 50 ml
55-530-360 Bag with 10 pcs.
Econgun for Epoxy syringe dispenser 50 ml
55-530-345
ARALDIT Colour paste
With these colour pastes the epoxy glue can be coloured for repairings of the skis / snowboards and boots.
55-530-350 White, 50 g
55-530-351 Yellow, 50 g
55-530-352 Red, 50 g
55-530-353 Green, 50 g
55-530-354 Blue, 50 g
55-530-355 Black, 50 g
WORKSHOP ACCESSORIES
Base Repair
Epoxy Accessory Items
57-202-551
57-202-552
57-202-553
Mixing Cups, 100 pcs.
Mixing Sticks, 50 pcs.
Epoxy Brushes, 12 pcs.
Silicone Release Paper
Use over base patches for easy release of clamping plates.
7019-01111-25 100 mm x 5 lfm
2
Polygun III Repair Pistol
With melting head 30 x 25 mm. This gun comes with 2 metal hooks which can be used as a stand.
55-560-306 1 x 220 - 230 V, 50 Hz, 300 W
Polygun II Repair Pistol
With electronic temperature control and lighted on/off switch. By using built-in magnets the device can be placed and fixed quickly and easily on a supplied metal plate. Nozzle width = 55 mm
55-560-304 1 x 220 - 230 V, 50 Hz, 375 W
Spare Nozzle
For Polygun Repair Pistol until 2010.
PRE120301A 20 x 20 mm
Spare Nut
For Polygun Repair Pistol until 2010.
PRE110302A
Repair Pins
For Repair Pistol Polygun, Polygun II and Polygun III.
55-560-310
55-560-311
55-560-313
55-560-315
55-560-316
55-560-317
Transparent, 11.5 x 160 mm, 10 pcs.
Black, 11.5 x 160 mm, 10 pcs.
Graphit, 11.5 x 160 mm, 10 pcs.
Transparent, 11.5 x 160 mm, 1 kg = about 70 pcs.
Black, 11.5 x 160 mm, 1 kg = about 70 pcs.
Graphit, 11.5 x 160 mm, 1 kg = about 70 pcs.
www.wintersteiger.com
31
2
WORKSHOP ACCESSORIES
Base Repair
Base Material
7510-01111-06 300 x 90 x 1.3 mm, Clear 10 pcs.
7510-01111-05 300 x 90 x 1.3 mm, Black 10 pcs.
Drip Candles
55-100-158
55-100-156
Clear, 10 pcs., 8 x 200 mm
Black, 10 pcs., 8 x 200 mm
Repair Strips
55-530-320
55-530-310
Clear, 1 kg
Black, 1 kg
Metal Grip
Polyethylene wire with adhesive for repairings of deep scratches at the base.
55-560-330
55-560-331
0.4 kg, Ø 5 mm, Clear
0.4 kg, Ø 5 mm, black
ATTENTION: Don´t use with repair pistols.
32
WORKSHOP ACCESSORIES
Base Repair
HW 130 Base Planer
55-240-401
Spare Blade for HW 130 base planer
55-240-406
55-240-405
For HW 130, 130 mm
For HW 100, 100 mm 2
Base Scraper
Incl. doublesided hardmetal blade.
55-240-300 With Blade 50mm
55-240-302 With Handle and Blade 65mm
Spare Blade
55-240-305
55-240-306
50 mm
65 mm
SFI Base Planer
55-240-350
Spare Blade
55-240-355
Radial File
Chromealloyed special steel, for removing repair material from base and sharpening of the edges.
55-500-040 300 mm
55-500-004 350 mm
Holder for radial file
55-500-041 350 mm www.wintersteiger.com
33
2
WORKSHOP ACCESSORIES
Base Repair
Grinding block double-sided
Sanding paper can be fixed on both sides of the grinding block.
55-500-140
Sanding Paper
55-500-143
55-500-145
55-500-147
Grain 180, 50 pcs.
Grain 240, 50 pcs.
Grain 320, 50 pcs.
Base Polish Set
7019-01111-V4 2 pcs. each, coarse and fine, 140 x 110 mm
Professional True Bar
Determines flatness of the base.
55-240-462 L = 150 mm
Brass File Brush
To clean debris from the teeth of files.
55-500-035
File Brush / Card
To clean debris from the teeth of files.
Proper cleaning helps to prolong the life of a file and ensures better overall tuning results.
55-500-180
34
www.wintersteiger.com
35
2
WORKSHOP ACCESSORIES
Edge Care
File Guides for base edge tuning:
Angel File Guide
Set with 3 guides: 0.5°, 1° and 1.5°. Produces accurate degrees of base bevel, suitable for files up to 20 mm width.
55-500-095
Adjustable BASE EDGE File Guide
This base edge file guide uses the same quality in design and materials as the 55-500-092 and 55-500-093. The new design allows for the adjustment of the base edge from 0.5 to 1.5 of bevel.
57-401-112 0.5° - 1.5°
Alu-Oxyd-File
For very hard edges.
55-500-028 150 x 17 x 17 mm, Grain 100
1
4
2
3
VALLORBE ICECUT Ski- and Snowboard Files
Files with swiss precision. Used by World Cup technicians because of the precise cut teeth, comfortable tangless design, highest hardness and extended life time.
1
2
3
55-500-037
55-500-038
55-500-039
120 x 22 mm
150 x 17 mm
200 x 22 mm
ICECUT Racing File
New type of racing file with special steel for racing use; with extremly long life time!
4 55-500-042 100 x 22 mm
36
WORKSHOP ACCESSORIES
Edge Care
Finn Files
High quality file for sharpening side and base edge.
These are the same files used by World Cup service technicians and service shops around the world. Guaranteed for their quality and straightness, these are the best files you will find for the money.
55-500-130
55-500-131
55-500-132
150 x 15 mm, Cut 2
200 x 20 mm, Cut 1
250 x 25 mm, Cut 1 2
Diamond Stones
These new diamond files have a high quality diamond fabric with an innovative pattern mounted on hard plastic composite. Best if used with water.
57-401-210
57-401-211
57-401-212
57-401-220
57-401-221
57-401-222
70 mm Fine
70 mm Medium
70 mm Coarse
100 mm Fine
100 mm Medium
100 mm Coarse
Moonflex Diamond Files
These single packed diamond files with a unique design of the diamond pattern removes material but leaves no strations for a fine polish.
Best if used with water.
55-500-151
55-500-152
55-500-154
55-500-156
55-500-158
55-500-161
55-500-162
55-500-164
55-500-166
55-500-168
Grain 100, 102 x 25 mm, black
Grain 200, 102 x 25 mm, red
Grain 400, 102 x 25 mm, yellow
Grain 600, 102 x 25 mm, white
Grain 1500, 102 x 25 mm, blue
Grain 100, 70 x 25 mm, black
Grain 200, 70 x 25 mm, red
Grain 400, 70 x 25 mm, yellow
Grain 600, 70 x 25 mm, white
Grain 1500, 70 x 25 mm, blue www.wintersteiger.com
37
2
WORKSHOP ACCESSORIES
Edge Care
File Guides for side edge tuning:
PRO SHARP RACE File Guide
This updated professional side edge sharpener gives very accurate
bevels from 90 o 85 degrees. A larger knob allows adjustment to one of the 6 possible positions without the need of a screwdriver. Innovative arrow pattern allows waste material to fall free of the base without damage and reduces friction. Accepts files, stones, and diamond stones up to 6 mm thick and comes with a 80mm ICECUT file.
57-401-030 90° - 85°
Spare File ICECUT
For File Guide ERGOSS 10 and PRO SHARP.
57-401-174 80 mm
RACING SHARP
Ergonomic design side and base edge sharpener (for 89° to 86° side
edge bevel and 0.5° and 1° base edge bevel). Packaged for retail.
57-401-145 Including File tool
RACING SHARP KIT
Ergonomic design side and base edge sharpener (89° to 86° side
edge bevel and 0.5° and 1° base edge bevel). Packaged for retail.
57-401-146 Including Zirconium, File and Diamond tool
Replacement File
57-401-173
57-401-174
Replacement Zirconium File
Replacement File 80 mm
55-500-108 Replacement Diamond file
Combi Stone
To polish the edges.
55-500-014 100 x 50 x 25 mm
38
Tuning Steps
WORKSHOP ACCESSORIES
Edge Care
1 2 3
Zirconium:
Removes rock damage and burrs before using the file.
File:
Sharpens and sets the side edge angle at 90°, 89°,
88° or 87°.
Diamond:
Poilishes and finish the edges.
Best if used with water as a polishing solution.
QUICK SHARP File Guide
Side edge sharpener for 89 - 88 degrees.
The plastic molded tools are easy to use and carry on the hill.
Packaged for retail.
Quick Sharp File Guide
57-401-161 Including File tool
Quick Sharp EXTRA File Guide
57-401-163 Including Zirconium, File and Diamond tool
Replacement File
55-500-107 Replacement Zirconium File
55-500-106
55-500-108
Replacement File 40 mm
Replacement Diamond file
2
Aluminium Side Edge File Guides
These anodized aluminium file guides are the perfect choice for
the home tuner. Each guide is milled with a channel in the corner to allow fillings to fall away from the base. Tools can be used with most files or abrasive stones.
57-401-300
57-401-301
57-401-302
57-401-303
90°
89°
88°
87°
Spring Clamp
For Alu File Guide.
55-500-165
Gummi Stone
For fine buffing and polishing on the edge.
55-420-240
57-100-125
50 x 20 x 80 mm, grey
40 x 20 x 65 mm, red www.wintersteiger.com
39
2
40
WORKSHOP ACCESSORIES
Edge Care
Discman - precise edges for a better grip and best times in competition!
Discman
The grinding tool for side-edge and base edge tuning of skis and snowboards.
The perfect support tool for maintaining Ceramic
Disc Finish edges between shop visits
Exact edge geometry with Ceramic Disc Finish-Technology
Easy handling
Easy side-angle adjustment from 85° to 90° in steps of 0.5°
Mobile use due to a powerful rechargeable battery
Easy changing of the discs
With optional Base Edge Tuning Attachment also useable
for Base Edge Angles 0.5 - 2°!
Optional use of Angle Wheels 87°/88°
NEW: Corded Discman with external transformer
NEW: Any previously delivered (battery operated) Discman devices can be operated in future either by battery or external transformer + power cord!
Technical Specifications:
Grinding Speed 16.000 rpm
Grinding Disc Ø 35 mm
Grinding Angle 85° – 90° side edge, 0,5 - 2° base edge
Power supply Nickel Metal hydride battery 18 V = 2.200 mAh or external transformer 230 V / 50 Hz
Weight battery operated Discman: 1.6 kg (3.5 lb) including battery corded Discman: 1.0 kg (2.2 lb) without transformer; 3.6 kg (7.9 lb) with transformer
Discman 2 / 18 V
With grinding disc, rechargeably battery, cleaning brush, battery charger and tools for changing the disc.
55-100-650
55-100-641 with battery charger 240 V / 18 V with battery charger 110 V / 18 V
Discman 2 / 18 V - 230 V
With grinding disc, cleaning brush and tools for changing the disc.
55-100-660 with external transformer 230 V / 50 Hz
NEW
Discman Transformer Kit
With 3 m long connection cable and battery housing. By this retrofit kit any previously delivered (battery operated) Discman devices can be operated either by battery or by external transformer + power cord.
55-100-690 18 V - 230 V / 50 Hz
NEW
Additional Battery
Without battery charger.
55-100-652 18 V
Battery Charger
55-100-653 240 V / 18 V
Base Edge Tuning Attachment
For the optional use with the new Discman 2.
55-100-680 0.5° - 2°
WORKSHOP ACCESSORIES
Edge Care
Grinding Set
For precise edge angles the edge guides should be changed together with each change of the disc.
56-221-020 Grinding Disc, Ø = 35 mm, blue + 1 Pair of Edge Guides
Polishing Set
For precise edge angles the edge guides should be changed together with each change of the disc.
56-221-021 Polishing Disc, Ø = 35 mm, orange + 1 Pair of Edge Guides
Spare Angle Adjuster for Discman
64-140-863
Angle Wheels for Discman
For the opional use with both types of the Discman. With those angle wheels, the Discman glides more smoothly over the structures base.
55-100-687 87°
55-100-688 88°
NEW
Cleaning Brush
To clean the housing of the grinding disc.
55-500-320 L = 135 mm
Discman Abrasive Dust Collector
All Discman 2 devices (with black housing of the grinding disc, production year as of 2013) can be optionally equipped by an abrasive dust collector.
55-100-689
NEW
2 www.wintersteiger.com
41
2
WORKSHOP ACCESSORIES
Edge Care, Wax Material and Accessories
Wax Iron
High quality wax iron for skis and snowboards.
Fine tuned thermostat reduces temperature fluctuations and a thick metal base holds heat to prevent damage during waxing.
57-100-290 240 V, 50 Hz, 800 W
Waxpro 40
The handy waxer with changeable wax tub, adjustable waxing temperature; wax application in a few seconds and exact dosing.
Including 120 mm wide wax roller.
55-115-005 1 x 220 - 230 V, 50 Hz
55-115-001 1 x 110 V, 60 Hz
55-115-006 Spare wax tray with two replacement rollers
Waxpro 350
Handy waxer for snowboards including 350 mm wide wax roller, similar to Waxpro 40.
55-115-007 Waxpro 350, 1 x 220 - 230 V, 50 Hz
55-115-008 Waxpro 350, 1 x 110 V, 60 Hz
55-115-012 Replacement Silicone Roller 350 mm
55-115-022 Option: Wax Scraper with cover and wax filter
55-115-023 Option: Additional Wax Tray with Rollers and Cover
WINTERSTEIGER Wax Remover
For removing grease, wax, adhesives and cleaning.
55-640-305 1 Liter Can (33,8 fl oz)
Produced by VOLA RACING.
42
WORKSHOP ACCESSORIES
Wax Material and Accessories
Pressure Pump Sprayer
Handy pump spray for the application with the liquid wax and wax remover.
55-640-147 1.5 lt., with adjustable spray nozzle
2
WINTERSTEIGER Block Wax
1 Counter Top Display Box = 80 x 30 g = 2,4 kg; for hot waxing of skis and snowboards.
55-640-350
55-640-355
55-640-360
2,4 kg, Yellow / Warm, -8°C to 0°C (18°F to 32°F)
2,4 kg, Blue / Cold, -8°C to -20°C (18°F to -4°F)
2,4 kg, White / Universal for all snow temperatures
WINTERSTEIGER Wax Flakes
5 kg box; for hot waxing of skis and snowboards.
55-640-310
55-640-315
5 kg, Yellow / Warm, -8°C to 0°C (18°F to 32°F)
5 kg, Blue / Cold, -8°C to -20°C (18°F to -4°F)
55-640-320 5 kg, White / Universal for all snow temperatures
Produced by VOLA RACING.
www.wintersteiger.com
43
2
WORKSHOP ACCESSORIES
Wax Material and Accessories
Thermo-Jomax
A roll up Hot Box that allows for deep penetration of wax into the base without the bulk and hassles of a traditional hot box. The temperature is regulated to 55° - 65° C so the core and base material is not overheated but enables deep penetration of wax into the base. To use simply unroll the bag and place each ski, base down on either side of the
Thermo-Jomax bag and clamp the skis together. Plug the bag in and allow it to slowly reach the proper temperature for 5 to 10 minutes, saturation of the base will take an additional 60 to 90 minutes. After this time unplug the bag and allow to slowly cool back down to room temperature.
For nordic skis position the rolled-out thermal cover on the top side of the two ski supports. Place two cross-country skis on the thermal cover next to one another with the base facing down and slip the ends of the skis into the pockets at the end of the thermal cover. Close the velcro straps all the way down the ski. This puts the thermal cover in direct contact with the base of the cross-country skis. The saturation of the base takes about 60 - 90 minutes as with the alpine skis.
Bag can be easily wiped clean while the wax is still warm
Recommended separate bags for different race waxes
Maximum wax penetration at low temperatures
Will not damage the base of the core
First choice for factory and national race teams
The Thermo-Jomax Nordic can also be used for alpine skis
Thermo-Jomax Alpine
55-115-430
55-115-434
240 V, 50 Hz, 350 W, without Clamps
110 V, 60 Hz, 350 W, without Clamps
Set of Clamps
55-115-432 Set of 3 large Clamps
Thermo-Jomax Nordic
55-115-431
55-115-435
240 V, 50 Hz, 350 W with Velcro Straps
110 V, 60 Hz, 350 W with Velcro Straps
44
www.wintersteiger.com
45
WORKSHOP ACCESSORIES
Wax Material and Accessories
2
46
1
2
4
3
3
4
1
5
2
5
Plexi Scraper
To remove cooled wax from the base.
1
2
3
4
55-200-013
55-240-450
55-200-014
55-200-015
130 x 60 x 3 mm
150 x 60 x 4 mm
200 x 60 x 3 mm
320 x 70 x 5 mm
Metal Scraper Including sheath
To remove excess repair material from the base.
5 55-240-456 130 x 60 x 0.7 mm
Race Service Plastic Scraper Sharpener
This new plastic scraper sharpener is designed to meet the needs of race service personal and service techs. The tall side hold the plastic scraper in the perfect upright position while the large base provide a stable base to hold the tool. The plastic is removed by a replaceable 100 mm file and requires no adjustment to the blade.
57-203-430
Spare Replacement Blade
57-203-432 100 mm
Metal Scraper / True Bar
For snowboards, with 2 handles.
55-200-010 320 x 30 x 3 mm
WINTERSTEIGER Wax Brushes
1
Bronze Base Brush
This all bronze stiff brush is perfect for cleaning out wax in a coarse structure of the base before applying hot wax.
55-500-077 120 x 70 mm
2
Soft Base Brush
This soft nylon brush is the ideal tool for base finishing.
55-500-079 120 x 70 mm
3
Horsehair Base Brush
This is a high quality brush used for cross-country, alpine and snowboard tuning. An essential tool for the serious tuner to expose the base texture.
55-500-078 120 x 70 mm
4
Nylon Base Brush
General purpose stiff nylon bristle brush. Perfect for wax texturing.
55-500-016 120 x 70 mm
5
Fiber and Nylon Brush
Made out of fiber and nylon, this brush is very useful for cleaning and polishing. Use the fiber side for a deep cleaning of all base structures, followed by the nylon for a fine finish.
55-500-076 120 x 70 mm
2
4
6
1
3
5
1
2
3
WORKSHOP ACCESSORIES
Wax Material and Accessories
Oval Brushes
1
Horsehair
World Cup brush with leather strap. To expose the base texture with fine-grain snow.
55-500-111 210 x 90 mm
2
Nylon
World Cup brush with leather strap. To expose the base texture with coarse-grain snow.
55-500-112 210 x 90 mm
3
Bronze
World Cup brush with leather strap. Perfect for cleaning out wax in a coarse structure before applying hot wax.
55-500-110 210 x 90 mm
RED CREEK Roto Brushes
1
Copper Brush
The ideal brush to clean stone-ground skis before waxing.
Also used for structuring and hard wax removal. Use single shaft with plexi hood. Maximum 800 rpm.
55-500-306 0.06 x 9 mm, L = 100 mm
2
Gray Fine Nylon Brush
Used after horsehair, black nylon, or cork roller. Goes deep into the structure to remove excess wax as well as polish. General use as a final brush.
55-500-304 0.2 x 4 mm, L = 100 mm
3
Horse Hair Brown Brush
High quality brush used as final pass to expose the structure and reduce static charge.
55-500-307 0.25 x 6 mm, L = 100 mm
4 Black Nylon Brush
All around brush. For removal and polishing of medium or hard paraffin waxes.
55-500-305 0.2 x 11 mm, L = 100 mm
5 Steel Fine Roto Brush
Used to open and clean the structure, can be very aggressive and should be used at speed under 1000 rpm with eye protection. Never press down while using the steel brush.
55-500-314 0.04 x 6 mm, L = 100 mm
6
Cork
For melting additives, fluoro powder and even fluoro paraffins.
55-500-311 L = 100 mm www.wintersteiger.com
47
2
2
WORKSHOP ACCESSORIES
Wax Material and Accessories / General Workshop Accessories
RED CREEK Snowboard Roto Brushes
Gray Nylon Rotary Brush for Snowboards
Used as final step. Removes excess pure fluorocarbon additives with very good results.
55-500-308 0.12 x 4 mm, L = 300 mm
Horse Hair Brown Brush for Snowboards
Used to expose the structure and reduce static charge on snowboards.
55-500-316 0.25 x 6 mm, L = 300 mm
Hooded Single Handle
Long-life, stainless ball bearings and rubber handle.
For use with one 100 mm wide brush.
55-500-309
Double Handle with Single Hood
Long-life, stainless ball bearings and rubber handle.
To be used with two ski brushes 100 mm each.
55-500-318
Snowboard Shaft
Long-life, stainless ball bearings and rubber handle. To be used with
300 mm wide snowboard brushes or two ski brushes 100 mm each.
55-500-310
Paper Tape Racing Service
This paper tape is multi functional and can be used as follows:
base can be covered and protected if edges are prepared manually
during waxing the ski manually the floor can be protected against wax
by applying the tape on the side of the ski/board
Printing forms can be attached to the ski and can be removed spotless
55-500-170 1 Roll = 50 meters, 50 mm wide
Tool Box
With 5 drawers.
55-100-930 350 x 180 x 290 mm
48
3
2
1
WORKSHOP ACCESSORIES
General Workshop Accessories
Workshop Service Sticker
With consecutive numbering, minimum order: 100 pcs., informs your customer about the service steps and the advantages of a service.
78-300-780 German, 22.5 x 6 cm
78-300-781
78-300-782
English, 22.5 x 6 cm
French, 22.5 x 6 cm
78-300-783 Italian, 22.5 x 6 cm 2
Ski Pole Cutting Tool
55-500-001
Spare Blade
55-500-010
6
9
5
11
3
1
7
2
10
8
4
Grip and Basket Mounting Tool
55-650-100
1
2
1 Spare Clamping Jaws
55-650-101 1 pair
2
Mounting Adapter
For Pole Spring Lock Washers and Leki Adapters.
55-650-102 1 pair
1
2
3
4
4
5
6
7
8
9
10
10
11
12
12
55-650-115
55-650-116
55-650-117
55-650-118
55-650-119
55-650-129
55-650-130
55-650-120
55-650-121
55-650-122
55-650-123
55-650-124
55-650-126
55-650-127
55-650-128
Ski Pole Accessories
Black only.
1 Racing basket small Ø 50 mm
2 Racing basket big Ø 65 mm
Universal basket big Ø 60 mm
TÜV basket small Ø 70 mm
TÜV basket big Ø 75 mm
Big basket Ø 120 mm with metal ring
Conical racing basket Ø 75 mm
Universal basket adapter
LEKI adapter
Reduction adapter
Spring lock washer 11 mm
Spring lock washer 10 mm
Jet grip 18 mm with strap
Nylon strap
Nylon strap with eyelet
12 www.wintersteiger.com
49
33
YOUR SPECIALIST FOR
CUSTOMIZED ALTHLETIC
FOOTWEAR
ANALYzE SELECT CuSTOmIzE
Discover our BOOTDOC and HOTRONIC products. BOOTDOC stands for foot analysis systems, customized insoles and compression socks, foam liners, and complete ski boots. Discover how you can achieve the perfect fit in just 3 steps, and contact your regional sales manager for details of boot fitting options. HOTRONIC is well-known for heatable insoles, as well as boot and glove dryers.
50
BD FOOT ANALYSIS BD FF S9 BD BEEDEE 9 BD C4F
YOUR SPECIALIST FOR
CUSTOMIZED ALTHLETIC
FOOTWEAR
hOTrONIC hEATING SYSTEmS
33
BACKSHOP ACCESSORIES
Boot Fitting
33
Boot Fitting
Your customers always want the most comfort from a ski boot, from the time of purchase to all those times on the mountain. Ultracam-Universal is a very distinct and practical machine for removing problem zones in a ski boot. The combination of three different applications (toe box area, heel area and cuff area) the interaction of mechanics and heat results in a fast and simple method for stretching any hard shell boot. The Ultracam-Universal will also stretch any plastic or leather footwear, including hiking boots, in-line and ice skates, and dress shoes.
Fitting all your customers needs.
When using the Ultracam Boot Press, keep the machine in a visible area for all of your customers to see you and it at work. The Ultracam is designed to have consumer appeal, and you will get many requests for custom fittings from your customers. It is amazing how many people do not know what can be done to customize ski and snowboard boots.
Ultracam with removable arms.
Models with removable arms require the shortest amount of working time. A pair of boots can be stretched and widened at the same time. Having a machine removable arms makes cool down time faster, which allows more boots to be formed in the shortest amount of time.
Ultracam with fixed arms.
Models with fixed arms can stretch and widen a pair of ski shoes at the same time. However about
30 minutes of cool down time is necessary, because the arms are fixed on the machine.
Ultracam Universal
Top Plus Digital
The digital display (with electronic thermostat and temperature probe) enables to set a more precise heating temperature as well as to follow and limit the temperature inside the boot during the customizing process (the temperature probe has to be placed inside the boot on the backside of the lasts).
Ultracam Universal Top Plus
With 2 removable arms and top plus accessory kit, u-bolts, round ball and ring punches, and measurement scale.
55-104-115 220 V, 450 W, 36.5 kg, 400 x 600 x 770 mm
Ultracam Universal Top Plus Digital
Like “Top Plus” with digital display.
55-104-165 220 V, 450 W, 36.5 kg, 400 x 600 x 770 mm
Ultracam Universal Single Plus
With 1 removable arm and 3 sizes of straight lasts, includes 7 adapters for expanding and stretching problem zones and 2 u-bolts, round ball and ring punches, and measurement scale.
55-104-105 220 V, 250 W, 27.5 kg, 400 x 470 x 770 mm
Ultracam Universal Single Plus Digital
Like “Single Plus” with digital display.
55-104-155 220 V, 250 W, 27.5 kg, 400 x 470 x 770 mm
52
BACKSHOP ACCESSORIES
Boot Fitting
Ultracam Universal Top
Like “Top Plus” with 2 fixed arms.
55-104-110 220 V, 450 W, 35 kg, 400 x 600 x 600 mm
Ultracam Universal Top Digital
Like “Top” with digital display.
55-104-160 220 V, 450 W, 35 kg, 400 x 600 x 600 mm
Ultracam Universal Single
Like “Single Plus” with 1 fixed workstation.
55-104-100 220 V, 250 W, 25 kg, 400 x 470 x 600 mm
Ultracam Universal Single Digital
Like “Single” with digital display.
55-104-150 220 V, 250 W, 25 kg, 400 x 470 x 600 mm
Top Plus Accessory Kit
Featuring left and right shaped lasts for all Ultracams, and includes: 2 pair of long adapters, 4 small round adapters, oblong ankle ball and ring punches.
55-104-221
Set of Lasts for ice skates and hiking boots
Used for ice skates, hiking boots and any other leather shoes.
This set includes 3 pairs of special shaped lasts, 14 adapters for expanding and stretching problem zones and 4 u-bolts.
55-104-200
Last and Instep Set
This set includes two lasts for lenght stretching and a instep tool.
The instep tool will be mounted on the forefoot last and can be heated separately.
55-104-120 www.wintersteiger.com
53
33
33
54
BACKSHOP ACCESSORIES
Boot Fitting
Ultracam Instep Tool small
This small instep tool with heating element suits to the small lasts.
55-104-225
Ultracam Ankle Ball Oval
Used on the ankle arm this oval ankle ball with ring enables to stetch a longer area.
55-104-224
New Heel Pocket Last
Used on the ankle punch, this new ball and ring style last includes multiple elements to allow for clean expansion of the heel pocket.
55-104-220
Work Bench
With lockable wheels and 3 lockable drawers, the perfect stand for your Boot Fitting Machine.
55-125-200 1050 x 525 x 905 mm (L x W x H)
Boot Opener
Easy to use tool to open boot shells for better accessibility when grinding the inner shell and removing or attaching boot buckets. A must have tool for any custom boot fitter.
55-104-125
Boot Repair Set
Set with countersink screws M3 x 6/8, M4 x 8/12, M5 x 8/12, cylinder head screws M3 x 6, roundhead screws M3 x 6 washers M4 / M5, screw type oval rivets M3 x 5, M4 x 5, lunar nuts M3 x 5, M4 x 6 and M5 x 8 (total more than 550 pcs.).
55-112-016
The following components of the boot repair set art.no. 55-112-016 can be ordered separately:
55-112-017 Countersink screws M4 x 8, 500 pcs.
55-112-018
55-112-019
55-112-020
55-112-021
Countersink screws M5 x 8, 500 pcs.
Countersink screws M4 x 12, 500 pcs.
Countersink screws M5 x 12, 500 pcs.
Screw type oval rivets M3 x 5, 500 pcs.
55-112-022
55-112-023
55-112-024
Screw type oval rivets M4 x 5, 500 pcs.
Lunar nuts, M4 x 6, 500 pcs.
Lunar nuts, M5 x 8, 500 pcs.
BACKSHOP ACCESSORIES
Boot Fitting
3
2
3
1
2
Rivet Machine NM-11 / 21 with Tool Set
This riveting device comes with two tool holder. A large U-shaped holder for processing the rivets of ski boots. A small U-shaped holder for the ideal processing of rivets and eyelets at leather boots or ice skating boots as well as copper rivets of ice-skate-blades. The supplied tool set includes tools to work with semi-tubular rivets, copper rivets and eylets.
55-112-006
Spare Tool-Set N21
55-112-025
Tool 28/29 for Joint Rivets
For very large joint rivets with a diameter up to 25 mm at ski boots.
55-112-041
Rivets and Eylets
1
1
1
1
1
1
1
2
3
1
2
55-112-030
55-112-031
55-112-032
55-112-033
55-112-034
55-112-035
55-112-036
55-112-037
55-112-038
55-112-039
55-112-040
Semi-Tubular Rivets 10 mm, 100 pcs.
Semi-Tubular Rivets 12 mm, 100 pcs.
Semi-Tubular Rivets 14 mm, 100 pcs.
Semi-Tubular Rivets 16 mm, 100 pcs.
Semi-Tubular Rivets 18 mm, 100 pcs.
Semi-Tubular Rivets 20 mm, 100 pcs.
Semi-Tubular Rivets 22 mm, 100 pcs.
Semi-Tubular Rivets 24 mm, 100 pcs.
Copper Rivets 26 mm with Washers, 100 pcs.
Copper Rivets 32 mm with Washers, 100 pcs.
Eylets for Leather Boots, 100 pcs.
1
5
4
Flexible Shaft Grinder Kit
A professional tool for boot fitting, variable speed 11.000 – 25.000 rpm,
230 V, 50 Hz, 500 W, shaft length 1,5m, with 3 m long power cord
1
2
3
4
5
55-104-320
55-104-322
55-104-324
55-104-326
55-104-328
55-104-330
Basic device 230 V, 50 Hz
Flexible shaft, L = 1,5m, with 6mm chuck
Shaft 6 mm, M12
HSS ball grinding burrr M12, ø 30 mm
HSS drop grinding burr M12, ø 25 x 35 mm
Spare spindle shaft 4 mm, L = 1,5 m
NEW
33
BD Foot Sizing Device BRANNOCK
Stable aluminium foot sizing device for determining exact length in mondopoint size and width in mm.
57-305-004
57-305-007 up to Mondopoint 34.0
junior model, up to Mondopoint 24.0
www.wintersteiger.com
55
4
MACHINERY PROGRAM
The WINTERSTEIGER automation family
2 different housing sizes – can be combined for
between 2 and 8 processing modules
Flexibly combine the modules Belt, Stone, Disc,
Polishing and Finishing
Maximum throughput rate
Extremely small footprint
NEW: Discovery – The logical continuation of a sucess story!
Automatic Service Station for skis and snowboards.
In 2005, WINTERSTEIGER established a benchmark and new standards in grinding automats with the introduction of the Discovery. With more than 900 processing modules sold, the Discovery is the most successful tuning machine on the market. Development has consistently kept to these high standards.
Ceramic
Disc
Finish
Discovery with 8 processing modules
Ceramic
Disc
Finish
Discovery with 5 processing modules
Mercury – Enter the world of high end service!
Automatic Service Station for skis and snowboards.
Ceramic
Disc
Finish
Discovery with 2 processing modules
Ceramic
Disc
Finish
Mercury with manual loading and
2 processing modules
Ceramic
Disc
Finish
Mercury with automated loading unit and
3 processing modules
56
Basejet
Automatic Base Extruder
Race NC
Numerically Controlled
Single Stone Grinder
MACHINERY PROGRAM
NEW
Ceramic
Disc
Finish
Trimjet 2 / Trimjet 2 R
Automatic Doublesided Disc Edge Grinding and
Tuning Machine for skis and snowboards
Ceramic
Disc
Finish
Trim Disc 71
Automatic Edge Grinding and Tuning
Machine for skis and snowboards
Omega B
Belt Grinder for skis and snowboards
Omega RS 150, RS 350
Stone Grinder for skis and snowboards
4
Trim B
Side Edge Grinder for skis and snowboards
Sigma Eco
Belt Grinder for skis and snowboards
Omega SBI, RSBI
Combined Stone and Belt Grinder for skis and snowboards
Drivetronic
Ski Binding Testing and Adjustment Machine
Speedtronic Pro
Ski Binding Testing and Adjustment Machine
Ask for the detailed respective machinery brochure.
Omega S 150, S 350
Stone Grinder for skis and snowboards www.wintersteiger.com
57
MACHINERY PROGRAM
Waxjet Pro
Hot Waxing Machine for Skis and Snowboards.
The Waxjet Pro from WINTERSTEIGER provides excellent waxing results featuring a short heat-up time. The new heating system provides a precise temperature control, while using up to 60 % less energy than comparable products.
The optional edge deburring wheel and the easy roll exchange offers a very user-friendly service.
4
Your benefits summed up:
Low energy consumption (-60 %*)
Excellent wax results
Short heat-up time
Precise temperature control
Operation from both sides of
the machine is possible
Easy roll exchange
Compact design for
minimum footprint
Optional edge deburring wheel
* Savings of up to 60 % over
comparable products.
Technical specifications
Dimensions (L x W x H)
Working height with pedestal
Noise emission
Weight
Nominal voltage
Nominal load
Rated current
Fuse protection min./max.
Waxjet Pro - 7570-404-33
Waxjet Pro - 7570-404-43
Optional Stand - 7570-0111-V01
Optional Deburring Wheel - 7570-0211-V10
We reserve the right to make technical alterations.
610 x 590 x 480 mm
(24” x 23.22” x 19”)
910 mm (35.83”)
< 70 dB (A)
90 kg with stand, 70 kg without stand
1 AC, 208 - 240 V, 50/60 Hz
1.75 kW
6,5 A
10/16 A
1 AC, 208 - 240 V, 50/60 Hz
1 AC, 110 V, 60 Hz
1 AC, 110 V, 60 Hz
1.55 kW
12 A
13/15 A
Waxjet
The affordable entry-level model.
As an alternative to the scotchbrite wheels also wax brushes are available – see page 106/107.
Technical specifications
Weight
Dimensions (L x W x H)
Dimensions of universal stand (L x W x H)
Working height with universal stand
Wax wheel - 1-9-0135
Polishing wheel - 1-9-0135
Nominal load
Nominal voltage
Rated current
Fuse protection min./max.
Waxjet - 7568-403-33
Optional Stand - 7925-401
We reserve the right to make technical alterations.
75 kg without stand
770 x 620 x 400 mm (30.31” x 24.4” x 15.75”)
750 x 480 x 510 mm (29.53” x 18.9” x 20”)
880 mm (34.65”)
Ø 155 x 350 mm
Ø 155 x 350 mm
3,3 kW
208 – 240 V, 50/60 Hz, 1 AC
16 A
16/20 A
58
MACHINERY PROGRAM
Polyman
Base Repair for Skis and Snowboards.
Take control of repairing base damage yourself! With WINTERSTEIGER‘s Polyman you can carry out repairs to skis, carvers and snowboards in any workshop - large or small.
The easy to operate base repair unit ensures a high-quality and wear-resistant bond between the base itself and the repair material. Fast, reliable and professional first-aid for all types of base damage.
The melting head is formed in such a way that it ensures optimum bonding of repair material and base. Automatic material feed and powerful heating guarantee very even and thin application of material. Perfect distribution of material shortens the melting time and reduces the time spent for subsequent work steps such as base grinding. The temperature is controlled electronically. Start-up is prevented automatically during heat-up even though the heating time is very short. The constant cooling is highly efficient; cooling down takes place automatically when the unit is switched off. Both suitable for both right-handed and left-handed operation. The Polyman comes with a functional holder.
4
Your benefits summed up:
High level of profitability
Rapid heat-up time
Precise temperature control
Ease of handling
Technical specifications
Weight
Dimensions (L x W x H)
Melting width
Polyethylene material
Nominal load
Polyman
2.3 kg
300 x 80 x 320 mm
32 mm
Ø 3 mm, 400 g
0.4 kW
Nominal voltage 1 AC 208 – 230 V, 50/60 Hz 1 AC 115 V, 50/60 Hz
Rated current 1.9 / 3.8 A
Fuse protection min./max.
4/16 A
* We reserve the right to make technical alterations.
Polyman
7453-402-32 www.wintersteiger.com
59
MACHINE ACCESSORIES
Compressors
5
60
33-100-320
33-100-308
33-100-310
Compressor
Piston Compressor
Werker 350/10/50 W
Piston Compressor
Superfox 240/8/30 W
Piston Compressor
PL 840/10/270 D
Art.No.
33-100-320
Effective Output Volume 165 liter/min
Suction Volume 315 liter/min
Max. Operating Pressure 10 bar
Tank Volume 50 liter
Tank Position
Rated Power
Horizontal
2.2 kW / 3 hp
10 Rated Current
Fuse Protection
Voltage/Frequency
Sound Presure Level
Rotation
Dimensions L x B x H
Weight
Condensate Drain
Air drying unit
16
230 V / 50 Hz
77 dB
2850 RPM
930 x 380 x 720 mm
38 kg
Manuel
Optional
33-100-308
170 liter/min
240 liter/min
8 bar
30 liter
Horizontal
1.1 kW / 1.5 hp
5
16
230 V / 50 Hz
69 dB
1400 RPM
700 x 250 x 550 mm
28 kg
Manuel
Optional
33-100-310
595 liter/min
850 liter/min
10 bar
270 liter
Horizontal
5.5 kW / 7.5 hp
12
32
400 V / 50 Hz
76 dB
1150 RPM
1620 x 720 x 1290 mm
185 kg
Automated
Optional
33-100-325
33-100-355
20-116-550
Max. Operating
Pressure
Screw-Type Compressor MSM 5,5 DX-200
Art.No.
33-100-325
Effective Output Volume 600 liter/min
Suction Volume
10 bar
Tank Volume
Tank Position
Rated Power
Rated Current
Fuse Protection
Voltage/Frequency
Sound Presure Level
Rotation
Dimensions L x B x H
Weight
Condensate Drain
Air drying unit
Screw-Type Compressor
MSM MAXI 11 DF/270/10
33-100-355
1310 Liter/min.
10 bar
Air drying unit
DSX 900
20-116-550
850 liter/min
16 bar
200 liter
Horizontal
5.5 kW / 7.5 hp*
Automated
Included
270 Liter
Horizontal
11 kW / 15 hp
Automated
Included
0.28 kW / 0.38 hp
12
32
400 V / 50 Hz
64 dB
12
32
400 V / 50 Hz
68 dB
1.5
16
230 V / 50 Hz
7540 RPM 5575 RPM
1420 x 580 x 1260 mm 1540 x 620 x 1340 mm 380 x 480 x 530 mm
198 kg 255 kg 33 kg
Automated
Art.No.
Omega RS 150/350, Sigma RS
Basejet
Trim Disc 71
Trimjet
Tunejet SB
Tunejet SDF
Discovery S
Discovery PS / SS / SF / PSF / SSF
Discovery PSSF
Mercury
Discovery 2 (as of 2012) without Finishing Module
Discovery 2 (as of 2012) with Finishing Module
= Optimal (recommended by WINTERSTEIGER)
Werker 315 / 10 / 50 W Superfox 240 / 8 / 30 W PL 840 / 10 / 270 MSM 5,5 DX-200 MSM MAXI 11 DF/270/10
33-100-320 33-100-308 33-100-310 33-100-325 33-100-355
Max. Operating
Pressure
Screw-Type Compressor MSM 5,5 DX-200
Art.No.
33-100-325
Effective Output Volume 600 liter/min
Suction Volume
10 bar
Tank Volume
Tank Position
Rated Power
Rated Current
Fuse Protection
Voltage/Frequency
Sound Presure Level
Rotation
Dimensions L x B x H
Weight
Condensate Drain
Air drying unit
Screw-Type Compressor
MSM MAXI 11 DF/270/10
33-100-355
1310 Liter/min.
10 bar
Air drying unit
DSX 900
20-116-550
850 liter/min
16 bar
200 liter
Horizontal
5.5 kW / 7.5 hp*
Automated
Included
270 Liter
Horizontal
11 kW / 15 hp
Automated
Included
0.28 kW / 0.38 hp
12
32
400 V / 50 Hz
64 dB
12
32
400 V / 50 Hz
68 dB
1.5
16
230 V / 50 Hz
7540 RPM 5575 RPM
1420 x 580 x 1260 mm 1540 x 620 x 1340 mm 380 x 480 x 530 mm
198 kg 255 kg 33 kg
Automated
MACHINE ACCESSORIES
Accessories for Base Repair Machines
3
4
1
3
4
Polyethylene Wire:
1
Roll 1.5 kg with Smell Lemon
New polyethylene wire with smell lemon, which contributes to a pleasant climate in workshops. Exclusively available at WINTERSTEIGER!
Basejet, Polyjet 80 / 100 / 120 / 130
55-560-150 Ø 3 mm, Clear, soft
55-560-151
55-560-152
Ø 3 mm Black, soft
Ø 3 mm Graphite, soft
2
1
Roll 1.5 kg Standard
Basejet, Polyjet 80 / 100 / 120 / 130
55-560-109
55-560-107
55-560-106
Ø 3 mm Graphite, soft
Ø 3 mm Black, soft
Ø 3 mm Clear, soft
2
Roll 0.4 kg
Polyman (HRP)
55-560-100
55-560-104
55-560-110
55-560-116
55-560-115
Ø 3 mm Clear, hard
Ø 3 mm Clear, soft
Ø 3 mm Black, hard
Ø 3 mm Black, soft
Ø 3 mm Graphite, hard
6
5
3
Roll 1.5 kg
Laser
56-601-035
56-601-036
56-601-037
Ø 3 mm Clear
Ø 3 mm Black
Ø 3 mm Graphite
4
Roll 0.25 kg
Miniskid 05 / 20 / 25 / 35, Handy Laser
56-601-023 Ø 3 mm Clear
56-601-021 Ø 3 mm Graphite
5 Roll 0.4 kg
Miniskid 10, Skidmax
56-601-004
56-601-002
Ø 3 mm Clear
Ø 3 mm Graphite
6
Polyethylene Wire 4 kg
For MONTANA base repair machine.
55-560-340 Ø 5 mm Clear
55-560-341 Ø 5 mm Graphite www.wintersteiger.com
61
5
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
WINTERSTEIGER – Best Belt Quality
Blue Grinding Belt:
This zirconium corundum grinding belt has a very high quality and flexible return idler, as well as synthetic abrasive grain with controlled breaking behaviour. This breaking behaviour means that the abrasive grain repeatedly produces new grinding edges on the grain. The belt has a long lifetime and the grinding result is very good on the base, as well as on the edge (base and side edge).
The belt needs to be slightly broken before first use. The last part of the item number corresponds to the belt grain: XX-XXX-080,-100,-120,-150,-180
Tip: Fast band speed increases the material removal.
Caution: Ensure adequate cooling.
Red Tuning Belt:
A mixed grain made up of ceramics and corundum makes this belt less aggressive than the blue grinding belt. Many tiny grain peaks provide a fine surface on the edge. A special backing film provides the tuning belt with a high tensile strength and reduced extension. The patented inlaid bonding film prevents oversize on the bonding point and results in an even grinding pattern without grinding marks.
The edge is best polished and ground (tuned) in slight hanging position using a 40 Shore contact wheel.
With that the grain touches only the base structure tips.
Tip: New tuning belts have to be broken more than base grinding belts. Fast belt speed and good cooling required.
Trizact TM Grinding Belt:
The pyramid shaped arrangement of the abrasive grain gives the Trizact grinding belt a longer lifetime and enables an even and fibre free result (structural grind), as well as very fine edge tuning. However the material removal is less than with the red tuning belt. This belt is ideal for snowboards, which, due to their shape (concave or convex), cannot be ground on the stone pervectly.
The belt needs to be broken lightly before first use.
Tip: Only slight contact pressure and good cooling required.
Scotchbrite Belt (Waxing and Deburring Belt):
This belt is suitable for wet and dry operation and can be used for deburring, polishing and cold waxing
(only dry process) in one work step. The belt has a low belt extension due to the reinforced nonwoven fibrous web and is particularly resistant to tearing and thus has an enormous lifetime. Caution:
For dimensions 350 x 1300 mm and 350 x 2000 mm on machines with selfcentering idler wheel
(from year of manufacture 2000), we recommend the use of a top quality belt type (with reinforced belt back).
Tip: Slow belt speed.
Moonflex Diamond Belt:
The special Moonflex grit enables an enormous lifetime of these side edge belts (more than 2000 pairs).
Usage: grain 400 and 600 as tuning belt for very fine edge tuning, grain 060 and 120 as pregrinding belt for the discovery P-module.
Cork Finishing Belt:
For use after edge tuning. Fine hairs on the base are removed by using a lot of water, little pressure and low belt speed. A smooth and fibre free base is produced. This belt is mainly used for finishing and needs to be broken accordingly.
Tip: Slow belt speed.
Waxing and Polishing Belt:
These belts have a corundum or silicon carbide abrasive corn that is anchored solidly on a base made from elastic nylon fibres. This belt is mainly used for polishing after waxing.
Tip: Slow belt speed, low contact pressure.
62
MACHINE ACCESSORIES
Accessories for Grinding Machines
Machine
Side Edge
Grinding Belts
Dimensions / mm
22 x 722
Art.No.
Packing Unit: 20 pcs.
Price per piece
56-095-080/-100 Micro 60
SEG (Omega,
Sigma, Micro, SNB)
Trim B, Trim 40
Sigma B, Sigma Eco
Microjet, Sidedge
Universal 350
Combi
PUN 350, 350+
20 x 1200
56-100-080/-100/
-120/-220
Side Edge
Tuning Belts
Art.No.
56-150-020
MCR 800 / 1500
KNS
20 x 1500
56-105-080/-100/
-120
56-150-030
Discovery P
(until 2008)
Trim 100/120
Discovery P
(as of 2009)
40 x 1500
30 x 1400
56-106-080/
-100
56-107-080/
-100/-120
56-150-040
Art.No. = Grain for Side Edge Grinding Belts and Moonflex Diamond Belts:
XX-XXX -080 = Grain 80; -100 = Grain 100; -120 = Grain 120; -220 = Grain 220; -400 = Grain 400; -600 = Grain 600
Side Edge
Scotch Brite Belts
Art.No.
Moonflex
Diamond Belts
Art.No.
Packing Unit: 4 pcs.
Price per piece
56-180-120
56-180-150
56-180-180
56-101-400
56-101-600
Belt Dresser Stone
For manual use.
55-240-155 50 x 20 x 150 mm
Belt Dresser Stone
Discovery P (until 2011)
55-240-154 25 x 25 x 65 mm for Side Edge Grinding Belts
Mercury, Discovery 2 (as of 2012)
55-240-153 35 x 20 x 350 mm
Tunejet SB/SBF, Discovery P, Microjet Pro
55-240-157 50 x 25 x 400 mm for Base Grinding Belts www.wintersteiger.com
63
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
5
Base Grinding Belts Tuning Belts
Machine
Micro 1 / SB2, Pro
Micro 60, HET
Total Tools ST / B
Trim 100 / 120
Dimensions / mm
120 x 2000
150 x 1300
150 x 1500
Micro 80 / 81 / 100
MCR 800 / 1500
150 x 2000
TOKO COMBI SUPER 150 x 2100
Art.No.
56-108-080/-100/-120
56-110-080/-100/-120
56-115-080/-100/-120
56-120-080/-100/-120/-150
56-121-080
Micro 71, SNB 60 350 x 1300 56-133-080/-100/-120
Art.No.
56-150-120
56-150-110
56-150-150
56-150-340
GRINDRITE ST1800
Omega, Mercury,
Discovery 2
(as of 2012)
Sigma Eco, B, SBI
Micro
80 / 81 / 90 / 91 / 100
SNB 80
Micro 1 / SB2
PUN 350+
320 x 1500
350 x 1600
350 x 2000
55-311-080/-100
56-137-080/-100/-120
56-135-080/-100/-120
56-150-160
56-150-350
Tunejet SB
Microjet Pro
400 x 1600
Discovery
PS / PSF / PSSF
PUN 350
Universal 350, Combi
Evolutiv 40 / 25 / 20
350 x 1935
56-136-080/-100/-120
56-140-400
(Universal Grinding Belt)
56-560-080/-100/-120
56-150-400
Art.No. = Grain for Base Grinding Belts: XX-XXX-080 = grain 80; -100 = grain 100; -120 = grain 120; -150 = grain 150; -180 = grain 180
3M Trizact™ Grinding Belts
Art.No.
56-182-340
56-182-350
56-182-350
56-182-400
56-182-345
64
MACHINE ACCESSORIES
Accessories for Grinding Machines
Scotch Brite Belts
Machine
Micro 1 / SB2, Pro
Micro 60, HET
Total Tools ST/B
Trim 100 / 120
Dimensions / mm
120 x 2000
150 x 1300
150 x 1500
Micro 80 / 81 / 100
MCR 800 / 1500
150 x 2000
TOKO COMBI SUPER 150 x 2100
Art.No.
56-180-300
56-180-290
56-180-310
Micro 71, SNB 60 350 x 1300
56-180-315
(Standard quality)
56-180-330
(Top quality) *
GRINDRITE ST1800 320 x 1500
Omega 56-180-365
Sigma Eco, B, SBI
Micro
80 / 81 / 90 / 91 / 100
SNB 80
Micro 1 / SB2
PUN 350+
350 x 2000
* for machines with self centering idler wheel
56-180-320 (Standard quality)
56-180-335
(Top quality) *
Cork Finish Belts
Art.No.
56-180-590
56-181-150
56-181-340
56-181-320
56-181-360
56-181-350
Waxing and Polishing Belts
Art.No.
56-180-390
56-180-395
56-180-400
56-180-401
56-180-460
56-180-402
5 www.wintersteiger.com
65
MACHINE ACCESSORIES
Accessories for Grinding Machines
5
66
High Quality Grinding Stones by Wintersteiger
During grinding stone manufacturing the components (the abrasive grain, the binder and the adhesive) are pressed at a very high pressure (>
100 tons) to form a homogeneous grinding stone, before they are fired for a week at a temperature of over 1000°C.
The components and the mixing ratio defines the specifications of the grinding stone and thus its characteristics:
Fine grain
easily formable = precise structure
many abrasive grains deployed at the same time
softer binder = more aggressive grinding stone
Rough grain
less easily formable = less structuring ability
less abrasive grains carry out the grinding work
a harder binder is required = less
aggressive stone
Classification
0 ... very fine abrasive grain, very fine structure, very good cut, especially for Nordic
6 ... very hard binder, rough and round structure, low cut, very good durability against edge contact, perfectly suited for automatic pregrinding very soft low
Grinding stone hardness
Durability against edge contact
very hard high
Grinding stones are best classified by reference to their hardness. The hardness of a grinding stone also reflects its major characteristics such as its cutting ability or durability against edge contact.
Machines Art.No.
Color
Classification
Evaluation
Omega
SBI/350
Discovery 2
(as of 2012)
Mercury
Omega 150
Micro
80/81/100
Omega
RS 150
8570-0221-V04
8570-0221-V02
8570-0221-V05
8570-0221-V09
7600-0221-V01
7600-0221-V02
8100-0221-V05
8100-0221-V06
8100-0221-V74
8100-0221-V84
8100-0221-V85 blue brown pink white yellow pink white pink grey brown blue white turquoise
4
3
2
3
2
5
2
0
3
6
4
Very good structuring, good material removal, however, also good durability against edge contact and low break out tendency, structure rounded and less deep compared with e.g.
8570-0221-V02; suitable for pregrinding, but also for structuring
Good structuring, good material removal, very low tendency to grain break out, medium hardness, and medium durability against edge contact (known as the „“Shuttle Stone““); mainly suited for pregrinding, however, also for structuring
In comparison to 8570-0221-V04, slightly finer and sharper structuring, however, slightly less material removal, very low tendency to grain break out; mainly suited for structuring
Despite of a more porous appearance of the surface, this new specification (with more hollow space) allows an even finer and smoother structuring compared to 8570-0221-V05; very good durability against edge contact and very low tendency of grain break outs; because of more hollow space this grinding stone is somewhat diamond-friendly; preferably used for structuring, but is also suitable for pregrinding
Lange bewährter Schleifstein für sehr gute und scharf geschnittene Strukturen, sehr guter
Abtrag, Gefahr des Kanteneinlaufes (speziell bei vorstehenden Kanten); zu empfehlen nur auf manuellen Maschinen
Sehr harter Schleifstein mit weniger Abtrag, für mittlere Strukturqualtität; ideal für den Einsatz im Vorschliff zu empfehlen; lange Standzeiten und Lebensdauer
Approved grinding stone wheel for very good, sharply cut structures and good material removal. Offers wide range of applications, but a lower durability against edge contacts.
Compared to the other grinding stones for Race NC, this type has a coarser grain and is less applicable for very fine structures
Medium hardness with very fine grain; optimal suitable for very fine structures (finer than -V74), low resistance against steel edges; this specification has proven itself for many years
Medium hardness for sharp and fine structures
Hard quality for finest structures, rather low material removal; high resistance against steel edges
Silicium-Carbide (SIKA)-Stone for very fine and deep structures at XC- and jump skis
MACHINE ACCESSORIES
Accessories for Grinding Machines
Machines Art.No.
7689-0221-V01
Discovery
(until 2012)
Sigma 350
Sigma SBI
Mirco 90/91
7689-0221-V02 brown
7689-0221-V04 blue
7689-0221-V05
Color pink pink
Classification
Evaluation
2
3
4
Tried and trusted grinding stone for very good, and sharply cut structures, very good cut, low durability against edge contact (especially for protruding edges) only recommended for manual machines
Good structuring, good material removal, very low tendency of grain break out, medium hardness, and medium durability against edge contact (known as the "Shuttle Stone"); mainly suited for pregrinding, however, also for structuring
Very good structuring, good material removal, however, also good durability against edge contact and low break out tendency, structure rounded and less deep compared with e.g.
7689-0221-V02; suitable for pregrinding, but also for structuring
2
In comparison to 7689-0221-V04, slightly finer and sharper structuring, however, slightly less material removal, very low tendency of grain break out; mainly suited for structuring
Micro NC
Tunejet
Microjet
8031-0211-V06
8031-0211-V05
8700-0221-V11
8700-0221-V14 greybrown pink red orange blue
0
2
2
4
This grinding stone has a very fine grain; this means that very fine structures are possible
(the diamond must match; for example use a 56-200-162 diamond). This results in a clean cut with medium material removal, low edge contact stability; thus perfect for use with cross-country and ski-jumping skis
Tried and trusted grinding stone for very good, and sharply cut structures, wide range of applications; universal properties; very good material removal, tends towards low edge contact stability (especially for protruding edges), recommended for Alpine and cross-country skis
Good structure, good material removal, combined with very good durability against edge contact (better than V14), structure slightly rounder and not so deep, universal use
Tried and trusted grinding stone for very good, and sharply cut structures, very good material removal (higher than with V11 or V13, low durability against edge contact (especially with protruding edges); only recommended with oscillator
Shuttle 3C
Sigma 200
Micro 71
Micro
1 / SB2
MCR
800/1500
8500-0221-V01
8060-0221-V01
8060-0221-V02
8028-0221-V01
8028-0221-V02
7600-02211-V1
7230-02211-V4 brown blue greybrown pink brown pink pink
3
4
0
2
3
2
2
Good structure, good material removal, very low tendency of grain break out, medium hardness and medium durability against edge contact (typically used on the Shuttle)
Very good structure, medium material removal, however good durability against edge contact, structure slightly rounder and not as deep as with 8060-0221-V01, typically used with the
Sigma; suitable for pregrinding and structuring
This grinding stone has a very fine grain; this means that very fine structures are possible
(the diamond dressing tool must match, preferably with 56-200-162). This results in a clean cut with medium material removal, low durability against edge contact, thus perfect for use with Sigma for cross country and jumping skis and only for structuring
Tried and trusted grinding stone for very good, and sharply cut structures, very good material removal, risk of low durability against edge contact in case of protruding edges
Good structuring, good material removal, low break out, medium hardness, and medium durability against edge contact; mainly suited for pregrinding, however, also for structuring; universal use
Tried and trusted grinding stone for very good, and sharply cut structures, very good cut, low durability against edge contact (especially for protruding edges), only recommended for manual machines
Tried and trusted grinding stone for very good, and sharply cut structures, very good cut, low durability against edge contact (especially for protruding edges) only recommended for manual machines www.wintersteiger.com
67
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
5
68
Grinding Stones
Machine
Discovery 2 (as of 2012),
Mercury, Omega SBI/350
Diameter
300 mm
Omega 150,
Micro 80 / 81 / 100
350 mm
Omega RS 150
Sigma S 200 / RS 200
350 mm
Discovery
(until 2012)
300 mm
Sigma RS 350, SBI, S 350,
Micro 90 / 91
300 mm
300 mm
Width
350 mm
150 mm
150 mm
350 mm
350 mm
200 mm
Top Quality Soft Top Quality Medium
Art.No.
8570-0221-V5, pink for fine structures
Art.No.
8570-0221-V09 white yellow for fine and smooth structures
8570-0221-V02, brown
7600-0221-V01, pink
8100-0221-V06, grey brown
8100-0221-V85, turquois
7689-0221-V05, pink for fine structures
7689-0221-V05, pink for fine structures
7689-0221-V01, pink for accurate and precise structures
8100-0221-V05, pink
8100-0221-V74, blue
7689-0221-V02, brown
7689-0221-V02, brown
8060-0221-V02, grey brown, very soft, suitable only for fine structures at cross country skis and jump skis
8500-0221-V01, brown
Micro NC 350 mm 150 mm
Tunejet, Microjet 300 mm
Shuttle 3C, Shuttle 200 300 mm
Micro 71 250 mm
Micro 1 / SB2, PRO, Center* 350 mm
MCR 800 / 1500 350 mm
400 mm
350 mm
330 mm
120 mm
120 mm
SKID Evolutiv 20 / 25 350 mm 135 mm (as of 1997)
* with modification kit for a 150 mm wide stone please use the stone 7600-0221-V01
8031-0211-V05, pink
8031-0211-V06, grey brown; very soft, suitable only for fine structures at cross country skis and jump skis
8700-0221-V11, orange red for very fine structures
8028-0221-V01, pink
7600-02211-V1, pink
7230-02211-V4, pink
8500-0221-V01, brown
8028-0221-V02, brown
EV25150
MACHINE ACCESSORIES
Accessories for Grinding Machines
Top Quality Hard
Art.No.
8570-0221-V04, blue for rounded structures
8100-0221-V84, white
7689-0221-V04, blue for rounded structures
7689-0221-V04, blue for rounded structures
8060-0221-V01, blue
Top Quality Very Hard
Art.No.
7600-0221-V02, white
8700-0221-V14, blue for rounded structures
8060-0221-V01, blue
Look at page 66/67 for a more detailed description of those grinding stones.
8031-98
8700-98
8500-98
8028-98
7600-98
7230-98
EV25-98
Art.No. for returned flange
8570-98
7600-98
8100-98
7689-98
7689-98
8500-98 www.wintersteiger.com
69
5
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Diamond Technology
The dressing diamond is used to cut the desired structure into the grinding stone.
The smaller the diamond inserts, the smoother it is on the stone.
Rhomboid Diamond 56-200-161-9:
This rhomboid diamond is a synthetic diamond with five full-length needles (no
„needle grain“), length about 9mm each. The square needles are set edgewise, therefore the name „rhomboid“. Because of the smaller needle diameter, this diamond bit enables accurate and regular structuring. The diamond is 56-200-161-9 is recommended by WINTERSTEIGER as standard diamond for manual machines.
Advantage: Very exact and absolutely uniform structural cutting.
Attention: Don‘t dress dry with synthetic diamonds. Risk of glowing out!
Square Diamond 56-200-169:
This diamond is a synthetic diamond with five straight aligned full-length needles.
Because of this needle position the life time is higher compared to the diamond bits with rhomboid needle position. We recommend increasing the dressing speed by approx. 15 % compared to 56-200-161-9 diamond. WINTERSTEIGER additionally recommends a speed of approx. 550 rpm for return grindingmode (at automats). The diamond is 56-200-169 is recommended by WINTERSTEIGER as standard diamond for automated machines.
Advantage: Improved lifetime and very good structural cutting property.
Attention: Don‘t dress dry with synthetic diamonds. Risk of glowing out!
Square Diamond 56-200-169-P:
Due to the slower production speed of those synthetic diamond needles, the needles are harder compared to the similar diamond bit
56-200-169. This improved hardness of the needles in conjunction with a harder (sintered) carrier material ensures about 20% higher lifetime and more uniform structures on wide grinding stones. The P-diamond is recommended by Wintersteiger for grinding stones >= 350mm when hard grinding stones are used or if mainly deep structures are grinded.
Advantage: Maximum service life time and excellent structuring on wide grinding stones.
Caution: The-P-diamond needs more time to adjust to the stone shape upon installation compared to the standard diamond. Don‘t dress dry with synthetic diamonds. Risk of glowing out!
To get the perfect diamond set up for your needs, feel free to contact our experts from WINTERSTEIGER customer service.
Synthetic Diamonds
Art.No.
Positioning of the diamond needles
Quty. of Needles x Needle Dimension
56-200-161-9 1 rhomboid
5 x 0.5 x 0.5 mm
56-200-169 square
5 x 0.6 x 0.6 mm
2 56-200-169-P square
5 x 0,6 x 0.6 mm
Premium
2
Discovery
Mercury
Tunejet, Microjet
Shuttle 200/3C
Race NC
Micro NC
Omega S , SBI / Sigma S, SBI
Omega RS, Sigma RS
MCR 800/1500
Micro 1/SB2
Micro 60/80/81/100
Micro 71/90/91
With 9 mm long needles and
30 % higher lifetime!
1 2
70
MACHINE ACCESSORIES
Accessories for Grinding Machines
Rhomboid diamond 56-200-159:
This diamond a synthetic diamond with five full-length needles. Compared to the diamond 56-200-161, the needle diameter is 0.1 mm larger. This improves the lifetime while achieving good structuring. We recommend increasing the dressing speed by approx. 10% compared with the 56-200-161-9 diamond.
The structure of this diamond is slightly more stable as with the square diamond 56-200-169.
Advantage: Improved lifetime and very good structural cutting property.
Attention: Don’t dress dry with synthetic diamonds. Risk of glowing out!
Attention: Don’t dress dry with synthetic diamonds. Risk of glowing out!
Square diamond 56-200-163:
This diamond with 3 needles is mainly used for special structures.
Because of the larger, square-shaped and straight aligned needles very broad structures with large contact area and less structure grooves can be created (by using higher dressing speeds at lower rotation speeds).
Advantage: provides the highest lifetime of all diamonds.
Attention: Don’t dress dry with synthetic diamonds. Risk of glowing out!
Square Diamond 56-200-168:
This diamond is a synthetic diamond with five full-length needles. Compared to the diamond 56-200-161-9 the needles are aligned in a straight line and the needle diameter is 0.2 mm larger. This enables good pre-grinding characteristics and a high lifetime. We recommend increasing the dressing speed by approx. 35 % compared with the 56-200-161-9 diamond. Because of the larger needles the structures are slightly larger than with the diamond
56-200-161-9.
Advantage: Smooth structures, good material removal and long lifetime.
Rhomboid diamond 56-200-162:
This diamond with 3 needles is mainly used to grind cross-country skis, where very fine and exact structures are needed. This synthetic diamond has edgewise set needles as well as a low contact length.
Advantage: Finest structures for cross country skiing.
Attention: Don’t dress dry with synthetic diamonds. Risk of glowing out!
More special diamonds are available on request.
56-200-159 rhomboid
5 x 0.6 x 0.6 mm
3 56-200-168 square
5 x 0.7 x 0.7 mm
4 56-200-163 square
3 x 1.0 x 1.0 mm
5
Alpine
56-200-162 rhomboid
3 x 0.4 x 0.4 mm
6
Nordic
5
3 4 5 only for width 150/200 mm only for width 150/200 mm only for width 150/200 mm only for width 150/200 mm
= very good, = standard
6 www.wintersteiger.com
71
MACHINE ACCESSORIES
Accessories for Grinding Machines
Mercury
Enter the world of high end service.
With Mercury, WINTERSTEIGER gives you access to the highest end of service performance.
Whether Race Carver, All Mountain or Rocker –
Mercury‘s automated service procedure allows you to tune up to 30 pairs of skis to perfection every hour.
Mercury‘s flexible design can fully meet your needs. Customize your machine by choosing from a wide range of options.
5
Your benefits summed up:
Precisely tailored to your needs
2 loading alternatives: Manual (M) or by loading unit (L)
1 housing for 2 or 3 processing modules
Flexible combination of the modules Belt, Stone, Disc, Polishing or Finishing
Extremely small footprint
Perfect service for more turnover
Precise and reproducible base structure
Sharpest edges for increased durability
Perfectly polished base edge at tip and tail
Glossy finish thanks to waxing and polishing
72
Discovery
The logical continuation of a success story.
In 2005, WINTERSTEIGER established a benchmark and new standards in grinding machines with the introduction of the Discovery.
Offering among other things, tuning of skis and snowboards without bridges and suction cups, maximum throughput capacities thanks to ski magazines for 16 skis, and much more.
With more than 1000 processing modules sold, the Discovery is the most successful tuning machine on the market.
Your benefits summed up:
Precisely tailored to your needs
2 different housing sizes – can be combined for between 2 and 8 processing modules
Flexibly combine the modules Belt, Stone, Disc, Polishing and Finishing
Maximum throughput rate
Extremely efficient use of space
Perfect service for more turnover
Precise and reproducible base structure
Sharpest edges for increased durability
Perfectly polished base edge at tip and tail
Glossy finish thanks to waxing and polishing
MACHINE ACCESSORIES
Accessories for Grinding Machines
Precisely tailored to your needs.
Mercury’s and Discovery’s flexible design can fully meet your needs.
Customize your machine by choosing from a wide range of accessory products.
1 2
Belt Module
Base Grinding Belt
Art.No.
Dimension
56-137-080/-100/-120 1 350 x 1600 mm
Art.No. = Grain for Grinding Belts xx-xxx-080 = grain 80, xx-xxx-100 = grain 100, xx-xxx-120 = grain 120
Stone module
Belt Dressing Stone
Art.No.
Dimension
55-240-153 35 x 20 x 350 mm
Grinding Stones
Art.No.
8570-0221-V04
8570-0221-V02
8570-0221-V09 2
Diameter
300 mm
300 mm
300 mm
Width
350 mm
350 mm
350 mm
Colour
Blue
Brown white yellow
8570-0221-V05 300 mm 350 mm
* A detailed description of those grinding stones you find at page 66.
pink
Description
For rounded structures. *
Slightly softer than -V04, suits best for pregrinding *
For fine and smooth structures*
For fine structures, slightly softer and less material removal compared to –V04*
Dressing Diamonds
Art.No.
Quty. of Needles x
Needle Dimension
56-200-161-9 5 x 0.5 x 0.5 mm
56-200-168
56-200-169
56-200-169-P
56-200-163
5 x 0.7 x 0.7 mm
5 x 0.6 x 0.6 mm
5 x 0.6 x 0.6 mm
3 x 1.0 x 1.0 mm
Positioning of
Needles
Description rhomboid
The most common diamond for alpine skis to get precise and uniform structures.
New: with 9 mm long needles for extremely high life time.
square square
Compared to the 56-200-161-9 diamond, the needles are arranged in a square position and the needle diameter is 0.2 mm larger. This improves the lifetime while achieving a good pre-grinding characteristic.
The grinding result with this diamond is similar to the type 56-20-161-9. Because of the sqare arrangement of the needles the structures are a little bit smoother.
square square
Recommended for grinding stones with a width >= 350mm when hard grinding stones are used or if mainly deep structures are grinded.
Due to its wider needles arranged in square position, it achieves very wide structures with a larger distance between the structure rows at higher dressing speeds and lower stone rpm‘s while dressing. Offers the longest life time of any diamond bit.
www.wintersteiger.com
73
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
5
Disc module
Ceramic Discs
1
Art.No.
Dimension
56-220-054
56-220-048
56-220-052
56-220-053
Ø 154mm, B = 40 mm
Ø 154mm, B = 40 mm
Ø 154mm, B = 40 mm
Ø 154mm, B = 40 mm
Hardness Description
Medium
Soft
Medium
Hard
New disc with very good cut, enables a fine and clean edge.
Universal quality for a good cut.
Disc with medium hardness for a high life time and medium cut.
Hard disc for very smooth surface.
Polishing module
Polishing Discs
To polish the tipp and tail areas for a optically perfect base edge.
Art.No.
Hardness
56-200-504 2
56-200-505
Dimension
Ø 250mm, B = 50 mm,
1 pair
Ø 250mm, B = 50 mm,
1 pair
Soft
Hard
Finish Module
Waxing and Polishing Wheels
Art.No.
55-642-050 4
55-642-055 5
55-642-060 6
55-642-065 7
Dimension
Ø 100 mm x 350 mm
Ø 100 mm x 350 mm
Ø 100 mm x 350 mm
Ø 100 mm x 350 mm
Description
Waxing Wheel
Polishing Wheel
Scotchbrite Texturing Wheel
Nylon Texturing Wheel
Dressing Diamond
For dressing the polishing discs. Single packed; 2 pcs. needed per polishing module.
Art.No.
Dimension Positioning of the Needles
56-200-152 3 rectangular Multigrain
Wax Blocs
Art.No.
55-640-117
55-640-118
55-640-119
Description
W = 340 mm, Universal for all temperatures
W = 340 mm, Warm, 0° to -8° C
W = 340 mm, Cold, -8° to - 20° C
1 2 3 4 5 6 7
Grinding Cooler
At the automated service Stations Mercury and Discovery this powerful cooling device ensures a constant temperature of the grinding water down to 15°C. The constant water temperature allows to achieve absolutely consistent grinding results.
Detailed info and price on request
74
MACHINE ACCESSORIES
Accessories for Grinding Machines
Race NC
You can make the race!
Race Service Stone Grinding Machine for Alpine, Cross-Country and Jump Skis.
The Race NC proves once again WINTERSTEIGER’s commitment to market and technology leadership in the field of race service. It offers a full set of features for both alpine and nordic skiing.
Thanks to superior technology, easy handling and a compact size, the Race NC is establishing itself as a must-have for national skiing associations, manufacturers, and professional race grinding specialists.
After all, the innovative ongoing improvements are a result of close cooperation between WINTERSTEIGER and a number of national skiing associations and ski manufacturers‘ racing departments.
Automatic grinding pressure control
Perfect structuring of alpine, cross-country and jump skis
Continuous and dynamic balancing of the grinding stone directly on the machine
Constant grinding stone height thanks to an automatic lasercontrolled adjustment
Intuitive user controls with a color display and touch screen technology
Easily transportable, and simple set-up allows for worldwide deployment
Unbeatable variety of structures.
5 www.wintersteiger.com
75
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Accessories for Race NC
The full range of accessories for the Numerically
Controlled Single Stone Grinder Race NC.
WINTERSTEIGER offers a comprehensive range of specialized accessories to help you customize your Race NC.
This includes various grinding stones and diamonds for different racing applications as well as an optional cooling unit for the grinding water.
The grinding stones come without flange as the stones can be balanced dynamically directly at the machine. This brings WINTERSTEIGER another giant step towards ultimate precision. Good news for everyone moving up from the Micro NC: You can continue to use your diamonds and grinding stones
(after changing the flange) on the Race NC.
Grinding Stones
Diameter Art.No.
Cross Country
56-200-361 3
56-200-362 1
350 mm
350 mm
56-200-363 4 350 mm
56-200-364 2 350 mm
Width Colour Description
70 mm
70 mm
70 mm
70 mm
70 mm blue turquoise grey brown white pink
Universal Quality, medium hardness for precise and fine structures
Silicium- Carbide (SIKA)-Stone for very fine and deep structures
Medium hard quality with very fine grain; for very fine structures
(finer than with -361), optimal suitable for cross country skis; this specification has proven itself for many years with the previous machine Micro NC
Hard quality for finest but not deep structures, rather low material removal
(low porosity)
Approved grinding stone wheel for very good, sharply cut structures and large surface roughness. Offers wide range of applications. Compared to the other grinding stones for race NC, this type has a coarser grain and is less applicable for very fine structures.
56-200-365 8 350 mm
Alpine
56-200-371
56-200-372
6 350 mm
350 mm
56-200-373 7 350 mm
56-200-374 5 350 mm
56-200-375 350 mm
150 mm
150 mm blue turquoise
150 mm grey brown
150 mm
150 mm white pink
Medium hardness for sharp and fine structures
Silicium-Carbide (SIKA)-Stone for very fine and deep structures at XC- and jump skis
Medium hardness with very fine grain; optimal suitable for very fine structures
(finer than -371), low resistance against steel edges; this specification has proven itself for many years with the previous machine Micro NC
Hard quality for finest structures, rather low material removal; high resistance against steel edges
Approved grinding stone wheel for very good, sharply cut structures and good material removal. Offers wide range of applications, but a lower durability against edge contacts.
Compared to the other grinding stones for Race NC, this type has a coarser grain and is less applicable for very fine structures.
5
6
7
8
1
2
3
4
76
MACHINE ACCESSORIES
Accessories for Grinding Machines
Accessories for Race NC / Omega RS / Sigma RS
Individual dressing diamonds for higher performance.
The structure pattern depends on the needle diameter and the number of needles as well as the needle position. The finer the needles, the finer the structure; the larger the needles, the coarser the structure. A rhomboid needle position will create sharper and more aggressive structures, whereas a square needle position tends to create smoother structures with a larger distance between the structure rows (=larger contact area). The reason for this is the different degrees of diamond wear when dressing the grinding stone.
Dressing Diamonds
Art.No.
Quty. of Needles x Needle Dimension
Cross Country
56-200-162 3 x 0.4 x 0.4 mm
Positioning of the Needles
Description
56-200-095
56-200-090
6 x 0.3 x 0.3 mm
1 x 0.4 x 2.0 mm rhomboid square rectangular
The most common used diamond for racing service, for universal use with fine and exact structures for cross country skis.
With 6 extra fine needles, this diamond creates very fine structures, finer than the diamond 56-200-162. Despite the fine needles, this diamond has a similar life time like the diamond 56-200-162 due to the double quantity of needles.
With one rectangular needle, this diamond cuts precise structures with a bigger distance between the structure rows than the diamond 56-200-162. Offers high life time and a very uniform structure width.
Alpine
56-200-161-9
56-200-177
56-200-094
56-200-169
5 x 0.5 x 0.5 mm
6 x 0.4 x 0.4 mm
6 x 0.4 x 0.4 mm
5 x 0.6 x 0.6 mm rhomboid rhomboid square square
The most common diamond for alpine skis to get precise and uniform structures. NEW: with 9 mm long needles for extremely high life time.
With 6 fine needles, this diamond creates finer and more accurate structures compared to the diamond 56-200-161-9.
Creates fine structures for cold conditions. Because of the square needle arrangement, this diamond cuts a smoother structure than with the diamond 56-200-177.
The grinding result with this diamond is similar to the type 56-200-161-9. Because of the square arrangement of the needles the structures are a little bit smoother.
= for smoother structures with a bigger distance between the structure rows = for sharper and more aggressive strctures
5
Grinding Cooler
At the machines Race NC, Omega RS and Sigma RS this powerful cooling device ensures a constant temperature of the grinding water. The constant water temperature allows to achieve absolutely consistent grinding results.
Detailed info and price on request www.wintersteiger.com
77
5
78
MACHINE ACCESSORIES
Accessories for Grinding Machines
WINTERSTEIGER special: The Ceramic Disc Finish.
Disc technology has caught on. 90 % of all skis in ski production are tuned using disc technology.
WINTERSTEIGER works constantly on further development of this tried and tested technology in the servicing sector.
Advantages for the sports retailer:
Precise edge geometry
Precise edge angles along the whole length
of the ski or board
Fine, smooth edge surface
Always sharp grinding discs
Advantages for the rental shop:
Frequent grinding possible thanks to
low abrasion
Long lifespan of rental skis
No need to change belts
Long lifespan of disc
Advantages for the end user:
Improved turning qualities = more fun and
faster learning results
Better grip on hard slopes = increased safety
Edges remain sharper for a longer period of time
Easier turning on the edge = Carving
The following machines are equipped with
Ceramic Disc Finish:
Tunejet, Discovery, Shuttle, Trimjet, Microjet Disc,
Trim Disc 91,Trim Disc 71, Trim NC
With the Ceramic Discs 56-220-046,
56-220-048, 56-220-052, 56-220-053,
56-220-054, 56-220-060, 56-220-091 and 56-220-092 WINTERSTEIGER offers very fine balanced discs (each single disc is electronically balanced). These discs prevent vibrations and secure a high quality tune.
Ceramic Discs
Without flange.
Discovery, Mercury
Balanced; medium hardness for a high life time and medium cut; creates more grinding noise than 56-220-048.
56-220-052 Ø 154 mm, W = 40 mm, pair
Discovery, Mercury
Balanced; hard quality for a very high life time; lower cut than -048 and -052, but very smooth surface.
56-220-053 Ø 154 mm, W = 40 mm, pair
Discovery
Balanced; especially suitable for children skis and short women skis with low ski brakes. Medium hardness for medium cut; requires a slightly higher contact pressure than -048.
56-220-046 Ø 150 mm, W = 40 mm, pair
Trimjet, Trim Disc 81/91,
Shuttle 200/3C
Balanced; universal quality for for very good cut, clean and fine grinding; shorter life time than -052.
56-220-048 Ø 154 mm, W = 40 mm, pair
Trim Disc 71
Balanced; robust, but soft disc with very good cut.
56-220-060 Ø 154 mm, W = 40 mm, 1 piece
Discovery 2 (as of 2012), Mercury
Balanced; medium hardness for very good cut as well as clean and fine grinding.
56-220-054 Ø 154 mm, W = 40 mm, pair
WINTERSTEIGER special: The Ceramic Disc Finish.
MACHINE ACCESSORIES
Accessories for Grinding Machines
Ceramic Discs
Without flange.
Tunejet
Balanced: soft disc for very good cut; life time lower compared to the disc -092.
56-220-091 Ø 185 mm, W = 42 mm, pair
Balanced; medium quality for a very fine grind; slightly lower cut than -091.
56-220-092 Ø 185 mm, W = 42 mm, pair
Microjet Disc
Universal disc with medium cut and clean, fine grind; medium life time.
56-220-070 Ø 175 mm, W = 40 mm
Mounting Screws
For ceramic discs with disc-machines.
Shuttle, Trim 71, Trim 91
02-195-230 Screw M5 x 30 (6 pcs. per machine)
Mercury, Discovery, Tunejet, Microjet, Trimjet
02-195-225 Screw M5 x 25 (6 pcs. per machine)
Trimjet 2 (as of 2015)
Multigrain Dressing Diamond
Doublesided diamond bit to clean the ceramic discs at Trimjet 2 with central support. 2 pcs. needed per machine.
56-200-146 ø 15 mm
ERGO RAzOR Sidewall Planer
To remove sidewall material.
The ERGO RAzOR Sidewall Planer is essential for preparation of side edge filing. It is common for a file to be compromised by cutting into the sidewall of a ski. It is very important to remove the sidewall material to avoid loading files with plastic and to keep the sidewall from interfering with the bevel on the edge. The razor has an ergonomic design that fits into the palm of the hand. It is adjustable and can be used with both the right and left hands. It comes with a round cutting blade.
57-401-100
Razor Replacement Blades
55-500-089
55-500-088
Round Blade
Square Blade
NEW
5 www.wintersteiger.com
79
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Binding bridge Carbon universal, super light
Extremely light binding bridge with 900 g weight to use without dummy sole. Suitable for alpine and telemark skis with a minimum length of approx. 145 cm.
56-190-200 L = 1380 mm
Spare Central Support
For carbon binding bridge art.no. 56-190-200, comes with contact adhesive and mounting instruction.
56-190-260
Universal Brinding Bridge, lightweight
ALU binding bridge to use without dummy sole at manual machines.
Suitable for alpine and telemark skis with a minimum langth f approx. 130 cm.
7220-0111-V01 L = 1140 mm
Spare Adaptor
For universal binding bridge Alu (7220-0111-V01).
56-190-130
56-190-125
56-190-135
W = 80 mm, closed
W = 80 mm, with rounded groove for ski with uneven top sheets
W = 120 mm, closed for wide skis
Spare Non-Slip Tape
For universal binding bridge ALU (7220-0111-V01).
56-126-218 L = 1070 mm
NEW
Binding Bridge with hinge
For alpine skis with a minimum length of approx. 150 cm.
7217-4111-V01
Spare Hinge
Adjustable height, for binding bridge with hinge (7217-4111-V01).
64-140-437 L = 120 mm
80
Spare Adaptor
For binding bridge with hinge (7217-4111-V01).
56-190-110
Spare Non-Slip Tape
For binding bridge with hinge (7217-4111-V01).
56-126-210 L = 1070 mm
MACHINE ACCESSORIES
Accessories for Grinding Machines
Bridge Adaptors
For Salomon-Pilot, Pro Link, Head-Cyber, etc.
(for binding bridge with hinge 7217-4111-V01).
7217-0111-V05 Pair
5
Adaptor MARKER Duke, Baron, Chester, Griffon
In combination with the binding bridge for extreme carvers
(7219-4011-V02) this adaptor can be mounted under the dummy sole and reduces the angle as well as the height of the heel area of the binding.
7219-0211-V01 www.wintersteiger.com
81
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Binding Bridge for extreme carvers
For extreme carvers with a minimum length of approx.
7219-4011-V02 120 cm
Spare Non-Slip Tape
For binding bridge for extreme carvers (7219-5011-V02).
56-126-217 L = 943 mm
Spare Hinge
Adjustable height, for binding bridge for extreme carvers (7219-5011-V02).
7219-4012-001 L = 100 mm
Dummy Soles
For Boot Sole length 240 - 360 mm.
7219-42111-V1 Pair
Dummy Sole for Touring Bindings
Also suitable to Dynafit touring bindings.
7219-42111-V2 Pair
Adaptor for Rotary Plate Bindings
To mount on the dummy soles and to use only in combination with the binding bridge for extreme carvers (7219-5011-V02), 1 pc.
7219-0211-001 Each
NEW
82
MACHINE ACCESSORIES
Accessories for Grinding Machines
Carbon Binding Bridge for child skis
Lightweighted carbon bridge (510 g) for child skis with a minimum length of approx. 110 cm.
56-190-220 L = 890 mm
NEW
Binding Bridge for child skis
For child skis with a minimum length of approx. 90 cm, vertically adjustable.
7228-0111-V12
Dummy Soles
For boot sole lenght 200 - 290 mm.
7228-02111-V1 Pair
Spare Non-Slip Tape for Binding Bridge
For child-skis 7228-0111-V12, as of 2005.
56-126-216 L = 922 mm
5
83
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Nordic Carbon Binding Bridge
Extremly lightweighted carbon binding bridge with only 350 g weight; with fixed metal bail to attach to binding.
56-190-240 L = 1045 mm
NEW
Binding Bridge for cross-country skis
To fix on the binding.
7226-07
Spare Non-Slip Tape
56-126-219
56-126-214
L = 716 mm, for binding bridge 7226-07
L = 864 mm, for binding bridge 7226-05
(until 2010)
Dummy Sole-Workbench
For 1 pair of skis, to mount and dismount the dummy soles, with a basket for the storage of the dummy soles.
8501-4211-V01
Bridge Stand
7340-401 1680 x 680 x 350 mm
Moveable Rack
For Bridge Stand (7340-01) with free rolling wheels.
7340-4111-V01
84
3
MACHINE ACCESSORIES
Accessories for Grinding Machines
1
2
Panel Key
1 70-150-110 square, used for aggregate housings (except Omega)
3 43-195-352 suitable for panels at Omega
Panel Key T-End
For opening of electro-panels at grinding machines.
2 70-150-100
Long Brake Retainers
56-400-114
56-400-118 natural coloured, 100 pairs blue, 100 pairs
5
Short Brake Retainers
Green coloured.
56-400-110 100 pairs
Vacuum Suction Cup for Microjet
To fix the skis and boards on the microjet; 2 pcs. per machine.
67-227-420 Ø = 70 mm
Rubber Cutting for Vacuum Chuck
Tunejet
67-105-028 oval www.wintersteiger.com
85
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Snowboard Squeegee
55-240-200 L = 350 mm
Spray Gun with Tube
Trimjet, Trim Disc 71
8050-0811-V05 Cleaning tube (L = 2 m) with spray gun
Omega, Sigma, Trim Disc 91, Micro
8050-0521-V04 Spiral cleaning tube (L = 3 m) with spray gun
Mercury, Discovery, Tunejet, Microjet, Shuttle
8550-0811-V05 Spiral cleaning tube (L = 6 m) with spray gun
Spare Spray Gun
Retrofit Kit for cleaning tubes, including transition piece.
8550-0811-U05
Air Pistol with Hose
Special blow off pistol with low air consumption.
Mercury
37-500-417
33-240-205
Air pistol with high performance nozzle
Spiral hose L = 3 m
NEW
Micro, SNB 80, MCR, Trim 80/90, Polyjet
Support Roller
64-140-870 black
86
MACHINE ACCESSORIES
Accessories for Grinding Machines
SEG (as from 1998)
Support Roller
7633-V2
7634-V2
Alpine, ø 50 mm, L = 85 mm8
Extension for snowboards, ø 50 mm
Spare O-Ring
For support roller alpine and extension.
40-100-351 ø 40 x 4 mm
Rubber Spray Guard
Omega 150, Race NC
67-207-267 L = 212 mm
Omega 350 / SBI , Discovery (until 2012)
67-207-265 L = 350 mm
Mercury, Discovery 2 (as from 2012)
67-207-262 L = 420 mm
Ski Retainer
Spare Retainer for the automated conveyor magazine.
64-140-886
8550-0911-062
02-195-116
Retainer, green
Switch cam
Screw M4 x 16
5 www.wintersteiger.com
87
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Lifter Cable, Control Cable
Omega B, Sigma Eco, B, S
47-180-400 Lifter Cable
Sigma SBI
47-180-410 Lifter Cable
Micro 80 / 81 / 91 / 100, Micro 1 / SB2
47-116-125
47-116-126
Lifter Cable, stone side
Lifter Cable, belt side
47-116-125 Control Cable, belt side (as of 99 or with modification Kit)
SNB 80
47-116-125
MCR, SEL
47-116-100
47-116-110
47-116-120
Micro 71
47-116-128
Lifter Cable
Control Cable, back
Control Cable, front
Lifter Cable
Lifter Cable
2
1
Feed Wheel Rubber
Trimjet
56-400-060 4 pcs. per machine
1 Trim Disc 71
56-400-045 2 pcs. per machine
2 MCR
56-400-095
SEL, CBM
56-400-105
Feed Wheel
Feed wheel with 3 vulcanized feed wheel rubbers.
Omega, Sigma
56-400-130
88
2
1
Lacquer Sticks and Spray Paint
77-150-310
77-150-311
77-150-312
Spray Paint light grey 400 ml
Spray Paint dark grey 400 ml
Spray Paint green 400 ml
W-686-9006 Lacquer Stick light grey
W-686-9007 Lacquer Stick dark grey
W-686-7070 Lacquer Stick green
1
Grease Gun
With Tube.
70-140-150
2
Spare Tube
For Grease Gun, ref.no. 70-140-150.
70-140-151 L = 500 mm
Heavy Duty Lubricating Grease
76-320-141 400 g
MACHINE ACCESSORIES
Accessories for Grinding Machines
5
Machine Upgrades
Basejet
Ski Rest Professional
The optional ski rest allows an ergonomic working process for the preparation of skis and snowboards at the automated base extruder Basejet.
7470-1411-V03
Omega S150, S350
Ski Exit Tray
The optional exit tray facilitates your daily work.
8100-0611-V50
Trimjet 2 (as of 2015)
Tray Extension
By this option (2 pcs. individually adjustable extensions), the exit trays on both sides can be extended by a maximum length of 400 mm. Thus the water dropping from the skis / snowboards flows back into the machine.
8490-0351-V04
NEW
NEW www.wintersteiger.com
89
5
MACHINE ACCESSORIES
Fluidmanagement
Fluid Management
The fluid management system from WINTERSTEIGER supplies complete information for testing water and waterbased lubricating coolants. Offering a wide range of services for optimal testing, especially important for WINTERSTEIGER emulsion (lubricants, cleaning solutions, etc.).
Thus the industrial safety and industrial laws are followed. Providing a healthier environment for everyone.
This modular system offers one custom made solution for all ski and snowboard service workshops, and is first of this kind on the market.
WINTERSTEIGER health-tips
Since lubricating coolants contain many different chemicals, the following preventive measures are recommended:
Using suitable protective clothing
Using suitable protective gloves
Using suitable skin protection
Do not rub or touch nose, mouth or eye area with dirty hands
When skin comes in contact with lubricating coolants it should be immediately rinsed
Thorough cleaning of the hands before meals, the toilet attendance, before work
breaks and after completion of the activity
Be sure to clean all parts of the body that have come in contact with lubricating
coolants at the end of the work day with warm water and mild, non-scrubbing detergents
Afterwards apply skin creme to washed areas, as skin tends to dry out easily after
being in contact with so many chemicals
Micro Breather for Grinding Coolant
The lifetime of emulsions (grinding coolants) are significantly reduced by external pollution (bacteria) and missing oxygen in the water. If the mixture of water and emulsion in grinding machines is not in motion over a longer time, some bacteria or fungi can occur in the water quickly. To avoid this and to extend the lifetime of cooling lubricants, very fine air bubbles can be created with this Micro Breather by a ventilation plate. This ventilation plate is placed in the water tank and is controlled by a timer, which controls when and how often the air bubbles will be blown into the emulsion mixture.
The advantages for the user:
increased lifetime
less change intervals
less consumption of emulsion
improved hygiene
pleasant working atmosphere
less disposal costs
a hygienic working environment
promotes the health of the employees
55-645-375 230 V / 50 Hz / 5 W
90
1
2
3
MACHINE ACCESSORIES
Fluidmanagement
Recommendation: Aeration and ventilation of workshops with Grinding Machines due to the resulting emulsion vapors
During operation of the grinding machines an emulsion vapor (cooling lubricant vapor) arises from the grinding machine. At manual grinding machines the legal limit values of emulsion vapor concentration in the air of a workshop can be observed by multiple recirculation of the air volume of the workshop per hour. At automated grinding machines the legal limit values of emulsion vapor concentration in the air of a workshop can be observed by aeration and ventilation of the workshop or by extraction of the coolant vapor from the grinding machine. For an effective removal of cooling lubricant vapor out of the room there is a sufficient amount of temperature-controlled air required.
The operator of a workshop has the responsibility that workshop and operation is in compliance with all valid legal regulations in regards to accident prevention, workplace and environmental rules (and other applicable regulations). Thus we recommend that planning, dimensioning and installation of an aeration, de-aeration and ventilation system is performed by a local qualified ventilation company. Technical informations on the installed grinding machines in the backshop room like air flow per hour can be provided by WINTERSTEIGER in order to ensure the appropriate sizing of the exhaustion.
For the emulsion vapor filters delivered by WINTERSTEIGER in the past, the following replacement filters are available and we recommend the regular exchange of the filter cartridges as well as the regular cleaning of the pre filter elements.
Spare Fine Filter Kit
For Emulsion Vapor Filter. Should be changed once or twice a year.
Discovery S / SF, Tunejet
20-116-543
Mercury, Discovery PS / SS / PSF / SSF / SSSF / PSSF,
Microjet Pro / Disc, Twin Shuttle / Jet Shuttle
20-116-544
5
Spare Pre Filter Kit
For Emulsion Vapor Filter. Should be cleaned regularly.
Discovery S / SF, Tunejet
20-116-547
Mercury, Discovery PS / SS / PSF / SSF / SSSF / PSSF,
Microjet Pro / Disc, Twin Shuttle / Jet Shuttle
20-116-548
Spare Filter for Kappa Vapor Filter
For filters until 2006.
1
2
3
20-116-511 Prefilter
20-116-512 Filter fleece
20-116-513 Complete filter kit with fleece www.wintersteiger.com
91
5
92
MACHINE ACCESSORIES
Fluidmanagement
1
2
4
3
Emulsion Pro-Tec B 370
Fully synthetic abrasive coolant with extended long term stability.
1
2
55-645-273
55-645-274
10 kg. can
60 lt. barrel
Please note:
Mixing ratio: 2 - 3 %
Calculation factor for the refractometer:
2.7 Concentration in % = refractometer-value (°brix) x 2.7; e.g. with a
reading value of 1.1 on the refractometer the mixing ratio is 3 %;
Emulsion Pro-Tec B 470
Fully synthetic abrasive coolant with pleasant smell and long term stability.
Enables a more easier cleaning of your machine.
3 55-645-287
55-645-277
10 kg. can
50 lt. barrel
Please note:
Mixing ratio: 3 - 4 %
Calculation factor for the refractometer:
Concentration in % = refractometer-value (°brix) x 1.6; e.g. with a
reading value of 2.5 on the refractometer the mixing ratio is 4 %
Emulsion mixer
For a perfect and constant mixture of the abrasive coolant.
4 55-645-311
Emulsion Mixer DOSATRON
At this new mixer, an inserted piston motor ensures a continuous mixture of the emulsion with the beginning water, independently of possible throughput and pressure fluctuations in the water net of the inlet. Additionally the mixer can be adjusted within the range of 1 % to 5 % to the necessary mixing ratio.
The accessories of this mixer contain:
1 wall support
1 transparent hose with filter and ballast weight (to place into
the emulsion barrel)
1 connection hose (length 2 m) to the water tank
The necessary inlet hose to the mixer is to be provided on site and the pressure in the inlet to the mixer has to be between 0.3 and 6 bar.
Together with the new computation software with Discovery and Tunejet for a simple determination of the mixing proportion the necessary mixing concentration this mixer enables a comfortable dosage and refilling of the emulsion and brings a clear facilitation of work for the user.
7019-1011-V02
Refractometer
To check the mixing ratio of the emulsion in the water tank; important in each workshop.
55-645-245
1
2
MACHINE ACCESSORIES
Fluidmanagement
Machine Cleaning Agent
Special anticorrosive.
7019-1011-VO1 1000 ml
Analysis Kit Pro-Tec B 358
Enables the scrutiny and measurement of lubricating coolants as well as the documentation of the results of your measurement.
This kit consists of:
1 pc. Hard Case
1 set of 55-645-342 Pro-Tec B 360 Combi Test Strips (100 pcs.) for the determination of ph-value, nitrite-value and water hardness
1 pc. Refractometer 55-645-245
1 set of Paper Tissues
1 pc. Pipette
1 pc. waterproof Marker
2 pcs. Measurement Charts
1 Handling and Measuring Instruction
55-645-316
Pro-Tec B 360 Combi Test Strips
For the determination of ph-value, nitrite-value and water hardness with 1 strip.
55-645-342 100 pcs.
Pro-Tec B 352 pH-Value Measurement Strips
55-645-244 100 pcs.
Pro-Tec B 351 Cult-Dip Bacteria Measurement Strips
55-645-320 10 pcs.
Magnetic Rod
This magnetic rod can be mounted in the water tank. It collects the iron chips from the edges and reduces the pollution of the emulsion at the tank bottom. The iron chips have to be removed from the rod regularly.
1 Omega, Trimjet 2 R (as of 2015), Discovery S / SF, Microjet Disc
8700-0521-V06 100 mm
1 Discovery PS / SS / PSS / PSF / SSF / PSSF
8550-0811-V08 200 mm
2 Trim 71 / 91
8470-0521-V06 100 mm
1 Trimjet, Trimjet 2 (as of 2015)
8480-0811-V13 100 mm www.wintersteiger.com
93
5
5
MACHINE ACCESSORIES
Fluidmanagement
Pro-Tec G260 Lubrication Additive
Synthetic lubrication additive to add into the water tank - only for the
Discovery! Mixing ratio 0.05 % (0.5 g/Liter).
Discovery
55-645-278 1 lt. Can
Pro-Tec G 220 Foam Cleaner Spray
Forms a stable foam of in-depth effectiveness.
55-645-370 Spray 500 ml
Pro-Tec G 230 Preservative Spray
Protects the varnish and prevents the corrosion of bare metal parts.
55-645-360 Spray 500 ml
Lubricating Spray NEOVAL MTO 300
A high quality lubricating spray with high-grade additives. This chemically optimized lubricant is unique in design to provide outstanding performance. Versatility and reliable long-term performance make this product to one of the best.
sprays in all positions (ball valve)
never becomes gummy or sticky
free from acids, sulphure and silicone
high creep properties, UV-resistant
reduces friction, temperature and wear out
proved rust and corrosion protection according to DIN No 51 585 AIB
excellent heat resistance (-35°C to +500°C, short-term up to +1060°C)
chemically neutral towards plastic or sealing material
shelf-life in container: 10 years
Precise long-term lubrication, showing also excellent anti-corrosion properties and optimal creep properties. Neoval MTO 300 penetrates even to inaccessible lubricating points. Lubricates all kinds of movable plastic or metal parts. Treated parts stay clean and protected, Neoval MTO 300 does not attract dust.
55-645-112 400 ml, 12 sprays per box, price per piece
WD-40 Lubricating Spray
Competitive priced lubricating and cleaning product, also useable as corrosion protection.
55-645-110 400 ml
94
MACHINE ACCESSORIES
Fluidmanagement
Pro-Tec G 252 System Cleaner
For the disinfection of the machine.
Recommendes concentration: approx. 1 - 3 % (10 - 30 g/Liter).
55-645-365 1 lt.
Pro-Tec B 361 Biocide
For the preventive use in the water tank to avoid possible problems with bacteria and germs. If you have problems with foam because of probably too soft beginning water, this biocide lifts the pH value of the water and prevents a possible foam. Also with small bacteria contamination an exchange of the water can be avoided by additive of the Biocide.
Recommended concentration: approx. 0.5 % (5 g/Liter).
55-645-347 1 lt.
Machine
Trimjet
Trim Disc 71 / 91
Omega, Sigma
Micro
Trim NC
Race NC / Micro NC
Mercury
Discovery 2 (as of 2012) up to 2 base processing modules
Discovery 2 (as of 2012) with 3 or more base processing modules
Tunejet
Discovery S / SF
Disc / Finish Shuttle
Twin Shuttle
Jet Shuttle
Discovery PS / SS /
PSF / SSF / SSSF / PSSF
350 lt.
225 lt.
225 lt.
250 lt.
430 lt.
430 lt.
450 lt.
Volume of
Water Tank
60 lt.
45 lt.
80 lt.
95 lt.
100 lt.
150 lt.
200 lt.
200 lt.
Quantity of
System Cleaner
0.9 lt.
0.7 lt.
1.2 lt.
1.4 lt.
1.5 lt.
2.3 lt.
3.0 lt.
3.0 lt.
5.3 lt.
3.4 lt.
3.4 lt.
3.8 lt.
6.5 lt.
6.5 lt.
6.8 lt.
1.8 lt.
1.1 lt.
1.1 lt.
1.2 lt.
2.2 lt.
2.2 lt.
2.2 lt.
Quantity of
Biocide
0.3 lt.
0.2 lt.
0.4 lt.
0.5 lt.
0.6 lt.
0.8 lt.
1.0 lt.
1.0 lt.
5
Pro-Tec G 290 Skin Protection Set
With wall support consisting of skin protection 1 lt, hand cleaner 3 lt. and skin care 1 lt.
55-645-355
These skin protection products can be ordered also separately:
55-645-356 Pro-Tec G 290 Skin Protection 1 lt.
55-645-357 Pro-Tec G 290 Hand Cleaner 3 lt.
55-645-358 Pro-Tec G 290 Skin Care 1 lt.
www.wintersteiger.com
95
5
MACHINE ACCESSORIES
Accessories for Grinding Machines
Belt Filter
For optional use with the automatic service station Mercury and Discovery.
By permanent separating of the sharpening arrears the cleaning intervals of the machine as well as the life time of the water will be extended.
Mercury, Discovery 2 (as of 2012)
Gravity filter, small
At Discovery 2 only suitable for machines with 1 base processing module.
8570-0851-V10
37-600-113
3 x 400 V, 50 Hz / 3 x 220 V, 60 Hz, 0.12 kW, 120 kg
Filter fleece 500 mm x 200 m, also suitable to Belt Filter
8550-4821-V02 (Discovery until 2012)
Discovery 2 (as of 2012)
Gravity filter, large
Only suitable for machines with 2 or more base processing modules.
8570-0851-V11
37-600-114
3 x 400 V, 50 Hz / 3 x 220 V, 60 Hz, 0.12 kW, 125 kg
Filter fleece 700 mm x 200 m
96
MACHINE ACCESSORIES
Accessories for Grinding Machines
Touch Pen
For all machines with touch screen.
7000-0811-V01
Working Gloves
Wrinkle pre-shrinked, cut-proof and an excellent wet-grip, water tight, cotton lining.
55-500-027 310 mm long
Working Gloves PowerFlex®
Extreme resistance to cuts, splinters and burrs. The PowerFlex® glove
protects the wearer with a triple-layer construction that comprises steel,
glass fiber and Kevlar®. The glove exceeds EN388 cut level 5.
Extra-long cuff offers extended safety for the forearm.
Natural rubber crinkle finish provides a firm grip.
Partial water protection in the front area of the glove.
Excellent washability, with no decrease in comfort or fading.
55-500-260 size 8
55-500-261 size 9
55-500-262 size 10
Safety Glasses UVEX super fit
The UVEX super fit glasses are ultra light safety glasses (only 21 grams) with hinged side arms, an innovative design concept and sporty dynamics. They combine the features of advanced UVEX safety eyewear with the benefits of leading-edge material technology. The extra slim wrap-around lenses with a
6.5 base curve provide outstanding protection against mechanical hazards.
57-100-390 white/green
NEW
Stone Cleaning Plate
Discovery 2 (as of 2012), Mercury
8570-0224-V02
Tunejet, Microjet
8700-0224-V02
Discovery S / PS / SS / SF / PSF / SSF / SSSF / PSSF
8550-0224-V02
Shuttle 200, Shuttle 3C
8500-02611-V2
Race NC
8040-0211-V05
Micro NC
8032-0211-V01
97
5
5
Filter Accessories
Machine
Machine
Discovery 2 (as of 2012)
Discovery (until 2012)
Mercury
Omega
Sigma
Race NC
Trimjet 2 (as of 2015)
Trimjet (until 2014)
Trim Disc 71 / 91
Trim NC
Shuttle 3C
Shuttle 200
Micro 71
Micro 81 / 91, SNB 80, Micro NC
Tunejet
Microjet
Filter Bag
Art. No.
55-635-165
Description
ø 320 x 1500 mm
55-635-165 ø 320 x 1500 mm
55-635-175
Filter Bag Nylon,
ø 140 x 500 mm, for multiple use
55-635-170 ø 250 x 560 mm
55-635-170 ø 250 x 560 mm
55-635-175
55-635-170
55-635-165
Filter Bag Nylon,
ø 140 x 500 mm, for multiple use
ø 250 x 560 mm
ø 320 x 1500 mm for sludge pump of Twin and Jet Shuttle
Filter Sock
Art. No.
Description
55-635-185
Uncut Filter Sock
L = 50 m
55-635-185
Uncut Filter Sock
L = 50 m
55-635-185
Uncut Filter Sock
L = 50 m
55-635-185
55-635-180
Uncut Filter Sock
L = 50 m oder
Filter Sock L = 100 cm
55-635-185
55-635-180
Uncut Filter Sock
L = 50 m or
Filter Sock, L = 100 cm
55-635-185
Uncut Filter Sock
L = 50 m
55-635-185
55-635-180
Uncut Filter Sock
L = 50 m or
Filter Sock, L = 100 cm
55-635-185
55-635-180
Uncut Filter Sock
L = 50 m or
Filter Sock, L = 100 cm
55-635-185
55-635-180
Uncut Filter Sock
L = 50 m or
Filter Sock, L = 100 cm
55-635-160
ø 230 x 555 mm with metal ring
7600-01311-V03 Filter Bag with metal frame
55-635-170 Spare Filter Bag
250 x 560 mm
55-635-165 ø 320 x 1500 mm
55-635-170 ø 250 x 560 mm
55-635-185
55-635-180
Uncut Filter Sock
L = 50 m or
Filter Sock, L = 100 cm
98
MACHINE ACCESSORIES
Accessories for Grinding Machines
Filter Mat
Art. No.
Description
50-400-180
1400 x 600 x 20 mm
(L x W x H)
50-400-180
1400 x 600 x 20 mm
(L x W x H)
50-400-180
1400 x 600 x 20 mm
(L x W x H)
Filter Fleece
Art. No.
Description
Filter Catridge
Art. No.
Description
37-600-142 L = 250 mm, 300 µm
Cleaning Sieve
Art. No.
Description
37-600-142 L = 250 mm, 300 µm
37-600-146 L = 125 mm, 250 µm
64-140-900 288 x 233 mm
50-400-185
830 x 365 x 20 mm
(L x W x H)
50-400-190
350 x 330 x 20 mm
(L x W x H)
37-600-121
Filter Fleece Sheet
700 x 1170 mm,
10 pcs.
37-600-140 L = 250 mm, 150 µm
64-140-900 288 x 233 mm
64-140-900 288 x 233 mm
64-140-900 288 x 233 mm
50-400-175 1155 x 840 x 20 mm
(L x W x H)
50-400-180 1155 x 840 x 20 mm
(L x W x H)
37-600-123
37-600-119
Filter Fleece Sheet
1200 x 1500 mm,
10 pcs.
or
Fleece Roll 1200 mm x 100 m
50-400-185 830 x 365 x 20 mm
(L x W x H)
37-600-121
37-600-116
Filter Fleece Sheet
700 x 1170 mm,
10 pcs.
or
Fleece Roll
695 mm x 50 m
50-400-176 until end of
2003
1050 x 820 x 20 mm
(L x W x H)
37-600-123 Filter Fleece Sheet
1200 x 1500 mm,
10 pcs.
37-600-119 or
Fleece Roll
1200 mm x 100 m
64-140-900 288 x 233 mm
5 www.wintersteiger.com
99
MACHINE ACCESSORIES
Accessories for Waxing Machines
1-9-0135
55-420-125
55-642-006
55-420-116
5
55-420-115
1-9-0137
1-9-0130 1-9-0139
1-9-0140
1-9-0133
55-420-130
55-642-040
55-642-041
55-642-004
55-642-050
55-642-055
55-642-060
55-642-065
100
Machine
Discovery
(until 2012),
Mercury
Diameter Width
Deburring Wheel
Art.No.
100 mm 350 mm
Waxjet Pro / 91 / 92
Waxjet 90 SNB
165 mm
155 mm
Discovery
(until 2012)
Tunejet
Shuttle 3C
Waxjet 82
Waxjet 81
Waxjet 75/76
(until 1998)
Waxjet 75/76
(as of 1998)
Waxjet 90
BBG, CBM
Trim 120
Polisher 40 Single
Polisher 40 SNB
155 mm
155 mm
75 mm
155 mm
100 mm
165mm
155 mm
155 mm
155 mm
200 mm
165 mm
155 mm
200 mm
200 mm
152 mm
200 mm
155 mm
45 mm
350 mm
55-420-116
350 mm
400 mm
400 mm
200 mm
150 mm
45 mm
350 mm
350 mm
150 mm
150 mm
45 mm
150 mm
150 mm
100 mm
25 mm
150 mm
350 mm
55-420-125
55-420-116
55-420-116
55-420-115
Waxing Wheel
Wax Brush
Art.No.
55-642-050
1-9-0135 or
55-642-040
1-9-0135
1-9-0137
1-9-0133
1-9-0135
1-9-0135
1-9-0139
1-9-0139
MACHINE ACCESSORIES
Accessories for Waxing Machines
Polishing Wheel
(Texturing Brush)
Art.No.
55-642-055 / Polishing Brush
55-642-060 /
Scotchbrite Texturing Wheel
55-642-065 /
Nylon Texturing Wheel
1-9-0135 or
55-642-041 or
55-642-006
55-642-041
55-420-130
55-420-109
1-9-0140
55-642-004
1-9-0130
1-9-0140
1-9-0135
5 www.wintersteiger.com
101
5
MACHINE ACCESSORIES
Accessories for Waxing Machines
Waxing Belts
Waxjet 75
55-640-190 150 x 450 mm
Waxjet 80 / 90, SWM
55-640-180 100 x 800 mm
Waxjet 91, Waxjet 80 / 90 SNB
55-640-185 350 x 450 mm
SNBWM
56-180-370 340 x 1050 mm
Waxing Belt
Reichmann BWM 350
55-640-188 350 x 472 mm
Polishing Belt
Shuttle 3C
56-180-500 Ø = 90 mm, B = 120 mm
Waxing Fleece Roll
Trim 120, Shuttle 3C
1-9-0311 150 mm x 30 lfm, for hot waxing
Neoprene Sleeve
Wax´on, Skidwax
56-180-372 Ø = 119 mm, B = 350 mm
Waxjet 92, Waxjet
Exhaust Hood for Waxjet
Including 30° pipe bend and 150 mm hose connection nozzle;
The suction hose connecting to this and any extractor fan which may be required must be provided on site.
7567-4411-V01
102
MACHINE ACCESSORIES
Accessories for Waxing Machines
Discovery 2 (as of 2012), Mercury,
Discovery SF / PSF / SSF / PSSF / SSSF
Wax Bloc
55-640-117
55-640-118
55-640-119
W = 340 mm, Universal for all temperatures
W = 340 mm, Special wax, warm, 0° to -8° C
W = 340 mm, Special wax, cold, -8° to -20° C
Tunejet SDF / SBF
Wax Bloc
55-640-157
55-640-158
55-640-159
W = 390 mm, Universal for all temperatures
W = 390 mm, Special wax, warm, 0° to -8° C
W = 390 mm, Special wax, cold, -8° to -20° C
WINTERSTEIGER Bar Wax
1 box = 10 x 250 g = 2,5 kg; for hot waxing of skis and snowboards; handy bar shape to apply to waxing machines.
55-640-330
55-640-335
55-640-340
55-640-345
2,5 kg, Yellow / Warm, -8°C to 0°C (18°F to 32°F)
2,5 kg, Blue / Cold, -8°C to -20°C (18°F to -4°F)
2,5 kg, White / Universal for all snow temperatures
2,5 kg, Black / Universal molybdenum for all snow temperatures
Produced by VOLA RACING.
5
WINTERSTEIGER Block Wax
1 Counter Top Display Box = 80 x 30 g = 2,4 kg; for hot waxing of skis and snowboards.
55-640-350
55-640-355
55-640-360
2,4 kg, Yellow / Warm, -8°C to 0°C (18°F to 32°F)
2,4 kg, Blue / Cold, -8°C to -20°C (18°F to -4°F)
2,4 kg, White / Universal for all snow temperatures
Produced by VOLA RACING.
www.wintersteiger.com
103
5
MACHINE ACCESSORIES
Accessories for Waxing Machines
WINTERSTEIGER Wax Flakes
5 kg box; for hot waxing of skis and snowboards.
55-640-310
55-640-315
5 kg, Yellow / Warm, -8°C to 0°C (18°F to 32°F)
5 kg, Blue / Cold, -8°C to -20°C (18°F to -4°F)
55-640-320 5 kg, White / Universal for all snow temperatures
Produced by VOLA RACING.
WINTERSTEIGER Liquid Wax
Alpine Liquid Wax for all snow temperatures.
55-640-365
55-640-370
5 Liter Can (169 fl oz)
1 Liter Can (33,8 fl oz)
Produced by VOLA RACING.
WINTERSTEIGER Wax Remover
For removing grease, wax, adhesives and cleaning.
55-640-305 1 Liter Can (33,8 fl oz)
Produced by VOLA RACING.
Pressure Pump Sprayer
Handy pump spray for the application with the liquid wax and wax remover.
55-640-147 1.5 lt., with adjustable spray nozzle
104
MACHINE ACCESSORIES
Accessories for Binding Adjusting Machines
Test Binding
Once a month, your ski binding testing machine must be checked with a test binding.
7711-401
Drivetronic
Thermopaper
With 10 years readability.
15-798-290 W = 57 mm, L = 10 m
Drivetronic, Speedtronic
Thermopaper
With 10 years readability.
15-798-286 W = 80 mm
Drivetronic
Printing Forms
Height of A4
2 Copies like 55-700-900/-950/-960 with ring punching to store in a ring binder
With the external ticket printer TM-U295 the release values can be printed at this printing form.
55-700-995 KG english with 5 Skier Types (-1, 1, 2 , 3, 3+), 500 pcs.
55-700-990 KG german with 5 Skier Types (-1, 1, 2 , 3, 3+), 500 pcs.
Speedtronic Pro, Speedtronic, Skitronic Plus
Printing forms
For Speedtronic and Skitronic plus only with softwareupdate V5.0 according to ISO 11088 / 2005.
55-700-900 KG german with labels, with 5 Skier Types (-1, 1, 2, 3, 3+), 500 pcs.
55-700-950 KG german with 5 Skier Types (-1, 1, 2, 3, 3+), 500 pcs.
55-700-960 KG english with labels, with 5 Skier Types (-1, 1, 2, 3, 3+), 500 pcs.
55-700-643 KG french with labels, with 3 Skier Types (1, 2, 3), 500 pcs.
55-700-970 KG dutch with 5 Skier Types (-1, 1, 2, 3, 3+), 500 pcs.
5 www.wintersteiger.com
105
5
MACHINE ACCESSORIES
Accessories for Binding Adjusting Machines
Speedtronic, Skitronic Plus
Printing forms
For software up to V4.99.
55-700-620 KG german with labels, with 3 Skier Types (1, 2, 3), 500 pcs.
55-700-630 KG german with 3 Skier Types (1, 2, 3), 500 pcs.
55-700-643 KG french with labels, with 3 Skier Types (1, 2, 3), 500 pcs.
Skitronic
Printing forms
Only available as long as stock lasts!
55-700-336 KG german (7702), 500 pcs.
55-700-359 KG german with labels (7704), 500 pcs.
Clip
To fix the printing forms at the skis / snowboards.
55-700-310 144 pcs.
Tibiameter
7019-01111-18
Skitronic Plus, Skitronic, Speedtronic, Speedtronic Pro
Cleaning Card
55-700-500
106
MACHINE ACCESSORIES
Accessories for Binding Adjusting Machines
Skitronic Plus, Speedtronic, Speedtronic Pro
Printer Ribbon
16-900-501
Skitronic
Printer Ribbon
16-900-004
Spare Heel Release belt
Speedtronic Pro
67-760-151 L = 300 mm
Drivetronic
67-760-152
Speedtronic
67-760-150
L = 320 mm
L = 250 mm
5
Skitronic Plus, Skitronic
Spare Heel Release Belt
7700-04211-19
7700-04211-20
360 mm
330 mm, for platform bindings
Spare Clamps für Binding Testers
Skitronic Plus, Skitronic
7705-0231-V02
64-140-676
64-140-677
Standard Clamp
Spare Edge Protection 5 mm
Spare Edge Protection 10 mm
Drivetronic
7725-0311-V22 Spare Clamp www.wintersteiger.com
107
5
MACHINE ACCESSORIES
Accessories for Binding Adjusting Machines
Bent Lever Clamping Kit Skitronic Plus
Complete clamping kit Speedtronic Pro as conversion kit for Skitronic Plus, which enables the fixation of wider skis (up to approx. 115 mm in the binding area).
7705-70
Bent Lever Clamping Kit Drivetronic/Speedtronic
Complete clamping kit Speedtronic Pro as conversion kit for
Drivetronic/Speedtronic.
7726-10
108
MACHINE ACCESSORIES
Skate Grinding Machine and Accessories
Skate Grinding Machine PROSHARP AS1001
The PROSHARP AS1001 enables with automated grinding cycles, constant grinding pressure and feed speed a very precise and continous grinding quality.
Adjustable hollow setting, up to 6 mm radius
Adjustable grinding wheel pressure and feed
speed are constant during the entire grinding cycle
The boot is fixed on a clamping device and the whole
clamping device moves with a constant speed automatically
forward and backward over the grinding wheel with a chosen
number of grinding cycles (up to 5 grinding cycles)
NEW: with modified dressing unit to create a z-channel.
This z-channel gives increased grip, edge control and more speed!
Technical data
Power Rating: 200W
Voltage: 1 x 100 - 240 VAC; 50 - 60 Hz
Length: 660 mm, Width: 200 mm, Height: 240 mm
Weight: 18 kg
Comes with a stable transport box
55-755-040
5
Grinding Wheel
55-755-045
55-755-047
130 x 6 mm, K 70, fine
130 x 6 mm, K 54, coarse
Synthetic Diamond Dresser
55-755-050
Hollow and Blade Thickness Checker
55-755-055
Skate Grinding Wax
At the skate grinding machines with ceramic grinding wheel, a finer and more shiny blade of the skate can be reached by applying a „grinding wax“ on the skate blade or at the grinding wheel.
55-755-110 62 g
NEW www.wintersteiger.com
109
5
MACHINE ACCESSORIES
Skate Grinding Machine and Accessories
Skate grinding machine Prosharp SKATEPAL-Pro 3
The portable automatic skate sharpening machine for the highest demands.
In a short time the high-precision diamond grind technology of this machine allows a constant, sharp and clean grind. The diamond grinding wheel with a fixed radius of hollow guarantees a precise diamond cut and sets standards for optimal gliding on the ice.
Simply clamp the skate and 2 - 4 minutes later you get perfect edges. The SKATEPAL brings a new higher standard of grinding. The hollow radius can be changed by the easy and fast change of the diamond wheel.
The new SKATEPAL Pro 3 consists of a built-in carrying case and the vacuum cleaner can be connected on the right side of the case.
USP’s:
Automatic centering unit for the skate
Diamond grind with predefined radius
Fast grinding of the skates within 2-4 min per pair
Quick change of the grinding wheel
Easy use of the machine
Technical data:
Voltage: 12V DC, 1 x 100 - 240 VAC, 50 - 60 Hz, 150 W
Dimensions: 670 mm x 210 mm x 320 mm (L x W x H)
Weight: 14 kg
55-755-085 1 x 100 - 240 V, 50 - 60 Hz, 100 W
SKATEPAL Diamond Grinding Wheel
With a fixes radius of hollow.
55-755-087
55-755-086
55-755-093
55-755-088
55-755-089
55-755-090
55-755-091 radius 25 mm, Ø 100 mm, grit 64, for universal use radius 13 mm, Ø 100 mm, grit 64, for hockey radius 10 mm, Ø 100 mm, grit 252, for hockey radius 13 mm, Ø 100 mm, grit 252, for hockey radius 19 mm, Ø 100 mm, grit 252, for rental radius 13 mm, Ø 60 mm, grit 64, for figure skates radius 13 mm, Ø 60 mm, grit 252, for figure skates
SKATEPAL Toe Pick Adaptor
To use with figure skates.
55-755-091
110
MACHINE ACCESSORIES
Skate Grinding Machine and Accessories
SSM-2 / H 10
Portable skate grinding machine for hollow and flat grinding. Features an adjustable support roller, quick release holder and dust outlet. The new quick release holder H 10 enables also the fixation of speed skating boots.
7750 1 x 220 V, 50 Hz, Motor: 0.3 kW
Stand for SSM-2
7922-401 35 x 40 x 75 cm
Grinding Wheel
55-755-020 pink, 150 x 6 mm
Grinding Wheel
For hard metal skates.
55-755-021 blue, 150 x 6 mm
Diamond for hollow grinding
55-755-025 L = 80 mm
Diamond for flat grinding
55-755-026 L = 50 mm
5
PROSHARP Dust Cleaner Numatic
Suitable for PROSHARP SKATEPAL Pro 3, AS 1001 and SSM-2 / H10.
55-755-095 1 x 220 - 240 V, 50 - 60 Hz, 1200 W www.wintersteiger.com
111
6
Easyrent ACCESSORIES
Accessories for Easyrent Rental Software
1
5
3
For zebra Printer:
Thermotransfer Catridge
To use with plastic (polyester) labels.
1
2
15-798-182
15-798-830
Resin 56.9 mm – L = 74 m, Printer: TLP 2824
Resin 56.9 mm with 110 mm wide cardboard roll
L = 74 m, Printer: TLP 2844, GK 420
2
3 Polyester Labels
On carrier paper, removable, waterproof.
15-798-187
15-798-825
40 x 12 mm, 2000 pcs.
NEW: carrier paper perforated between each label
4
4
Polyester Labels
Between each label perforated, on carrier paper, removable, waterproof.
15-798-205
15-798-184
40 x 25 mm, 2000 pcs.
57 x 32 mm, 2000 pcs.
5
Paper Labels
For merchandise management and depot.
15-798-185-04 40 x 25 mm, 2000 pcs.
15-798-835 50 x 25 mm, 1300 pcs.
15-798-185-01 57 x 32 mm, 2100 pcs.
1
Thermotransfer Catridge
For paper labels, non-bleaching.
15-798-181 56.9 mm – L = 74 m, waxed
For Bon printer:
Thermo Paper
15-798-186 W = 80 mm, L = 80 m, 50 pcs. per box, price per piece
Thermo Paper
With 10 years readability, for bon printer.
15-798-286 W = 80 mm, L = 80 m, 50 pcs. per box, price per piece
112
Easyrent ACCESSORIES
Accessories for Easyrent Rental Software
Labels for Goggles
On carrier paper, removable, waterproof.
For the retail pricing of goggles.
15-798-298 90 x 13 mm, 1250 pcs.
Thermotransfer Catridge
Super Premium, for Labels 15-798-298.
15-798-855 110 mm, L = 74 m,
Printer: TLP2844, GK420
Customer Cards Easyrent
55-700-790 500 pcs.
Barcode Label
78-220-575 White, 30 x 17 mm, 1 roll = 500 pair labels
78-220-574 White, 30 x 17 mm, 1 roll = 100 pair labels
78-220-585 Red, 30 x 17 mm, 1 roll = 500 pair labels
78-220-586 Blue, 30 x 17 mm, 1 roll = 500 pair labels
78-220-587 Yellow, 30 x 17 mm, 1 roll = 500 pair labels
78-220-588 Green, 30 x 17 mm, 1 roll = 500 pair labels
78-220-589 Orange, 30 x 17 mm, 1 roll = 500 pair labels
2014
8566
L
5 0 1 3
1004
L
Layout proposal
Barcode Label with customized Logo
Delivery Time: 5 - 6 weeks
Minimum Quantity: 6 rolls = 3000 pair labels
78-220-590 30 x 17 mm, 1 roll = 500 pair labels
78-220-578 30 x 25 mm, 1 roll = 500 pair labels
6 www.wintersteiger.com
113
114
Easystore Flex
Custom-made solutions – the right choice for everyone.
WINTERSTEIGER‘s Easystore Flex systems for rental, depot and drying are extremely flexible and stable – they also offer a modern design as well as many new solutions that make them highly functional.
The Flex Modules can be combined for customized solutions.
Easystore Flex is the result of: the feedback and needs of our global customers, the further development of the tried-and-tested Easystore systems and the collaboration with renowned design agencies.
Experience the successful difference of Easystore Flex!
Easystore Flex – more than just an eye-catcher.
www.wintersteiger.com
115
Easystore Flex STORAGE / DRYING SYSTEMS
Compelling details.
Two types of Easystore Flex storage systems are available:
Ski racks of sendzimir-galvanized panel-sheet
1 – ideal for the back-of-shop area
Ski racks of sendzimir-galvanized panel-sheet
with additional powder coating 2 – for a
professional appearance
For an individual design, the ski rack‘s vertical supports can be equipped with narrow 3 or wide 4 front panels at the front and rear. We are happy to assist you with the design, including suggestions for the graphics.
1 2
3 4
7
FOM – Functional. Optimal. Maximal.
For the front panel, there are three options to choose from:
Functional: The entry-level model in trendy white
Optimal: A selection of wood designs
Maximal: Panels printed with your logo and professional design
116
Functional Optimal Maximal
Easystore Flex STORAGE / DRYING SYSTEMS
Easystore Flex – flexibly combining modules.
The individual storage and drying modules can be combined and arranged into individual storage systems – even within the same rack.
From planning to implementation.
Benefit from our experience.
WINTERSTEIGER supports you from the planning phase all the way to implementation of your perfect rental and depot facility.
An optimal organization – from the arrival of the customer to the issuing of the sports equipment – provides faster turnaround times and makes the work easier.
7
2D planning 3D planning Implementation www.wintersteiger.com
117
Easystore SHOP FURNITURE
Easystore Shop Furniture
A brilliant combination of design, ergonomics and flexibility.
Easystore shop furniture proves vividly that form and function can go hand in hand on the shop floor. WINTERSTEIGER has successfully combined ergonomic requirements with timeless minimalist design into a trendy package – while achieving an extremely high level of flexibility in customization.
The result is a modular furniture program that guarantees a user-friendly and attractive environment for you and your customers.
Check-In POS Furniture
7
Adjustment desk / Cash desk Bench Showcase
More success – with the customized FOM system.
Functional. Optimal. Maximal.
Easystore shop furniture is geared to your ideas. Our FOM system offers three appealing choices to customize your shops and optimize your workflow.
Functional – the entry-level model in trendy white
Optimal – offers the widest choice of colors and styles
Maximal – stands for project-specific design of your shop furniture
118
Functional Optimal Maximal
Easystore STORAGE LOCKERS
Easystore
Tailor-made storage solutions – the right choice for everyone.
Easystore locker systems by WINTERSTEIGER make an impression with state-of-the-art design, maximum flexibility and stability, and maximum storage capacity on a minimal footprint. Customized features allow you to choose your own colors, logos, visuals and labeling to customize the locker design.
Thanks to our partnership with Gladek Technik in the field of storage lockers, our range of rental, storage and drying systems has become even more versatile. We plan storage lockers individually based on your requirements, taking maximum space utilization, drying and disinfection into account and at the same time catering to your access system needs.
Our Easyrent rental, storage and POS software makes storage management unbelievably fast and easy. It also features a simple module for managing and lock control for the Easystore locker systems.
Benefit from our experience. WINTERSTEIGER supports you from the planning phase all the way to implementation of your perfect storage facility.
Read the following pages to discover in detail what WINTERSTEIGER offers you.
Please request the Easystore locker systems brochure for detailed information about customized locker solutions.
7 www.wintersteiger.com
119
Easystore DISINFECTION AND DEODORISATION
7
120
Ecological
SHOE FRESH / HELMET FRESH
Waer-based, ecological disinfectant for shoes and helmets. Spray several times inside the shoes, helmets and allow to dry about 15 minutes long.
Smell: Eucalyptus
Without alcohol
Biodegradable
Includes no synthetic perfume
Recyclable cans made of HDPE
Approved disinfection efficiency according EN 1276
55-100-880
55-100-885
55-100-865
55-100-870
NEW! SHOE FRESH, 500 ml pump spray;
12 pcs per box, price each
NEW!
HELMET FRESH, 500 ml pump spray;
12 pcs per box, price each
SHOE FRESH, 5 lt. can
HELMET FRESH, 5 lt. can The bactericidal and fungicides effect of the disinfectant and deodorizer liquid STERIBIO were tested in the laboratory and correspond to the standards DIN EN 1040 as well as DIN
EN 1075.
1
Disinfection and Deodorizer Liquid STERIBIO
For ski boots and sport shoes.
1
1
55-100-768
55-100-773
5 lt. can, smell: Freshness
5 lt. can, smell: Pin/Mint
4
3
2
Spray Bottle
For Disinfection and Deodorizer Liquid STERIBIO.
2 55-100-769 500 ml
Spray Bottle with extension 90°
With this extension, the toe area of the boots can be treated perfectly.
3 55-100-811 Pump Spray 1000 ml without liquid
Deodorizer
For boot dryer Eole Innova, Eole 1 / 6 / 7 / 9 / Optima.
4
4
4
4
55-100-772
55-100-774
55-100-761
55-100-762
Vanilla, set with 24 units
Vanilla, set with 10 units
Caribbean, set with 24 units
Caribbean, set with 10 units
(1 unit is enough for about 4 weeks)
SILICOL Renovator
For boots, skis and snowboards.
Cleans and makes shiny
Brightens colours up
Sets an antistatic, antidust and hydrophobe film
Dries without leaving of marks
Sweet smell for a pleasant use
55-100-847 6 pcs. à 750 ml
NEW
Easystore DISINFECTION AND DEODORISATION
Disinfection and Deodorizer Liquid BACTOBOOTS
For ski boots and sport shoes to use with the Easystore
Boot Dryer PREMIA PRO.
55-100-830 10 lt. can
DESINEX Disinfection Liquid
For lockers with automated liquid disinfection.
55-100-855 12 lt. can
Air Refresher Tabs
To be used for the Easystore Flex drying modules. Per level one piece of air refresher tab has to be put into the slot provided on the front side of the fan housing.
55-100-807 Ø 53 mm, bag with 10 pcs.
Deodorizer Zytrus 5 layers
For Easystore Boot Dryers OPTIMA, PREMIA and INNOVA.
55-100-806 100 x 50 x 5 mm www.wintersteiger.com
121
7
7
Easystore DISINFECTION AND DEODORISATION
Easyfresh – sanitized and fresh Boots and Helmets!
Bacteria have no chance anymore with Easyfresh! With two nozzles on each arm the whole boot can be disinfected perfectly. The compact machine has two arms for boots and one flexible nozzle for the treatment of helmets. Therefore your boots and helmets are always fresh and sanitized!
the flow rate und spray period can be choosen on the control panel
compressed air needed (6 bars pressure from the workshop outlet or a small separate compressor)
space for 2 separate liquid cans (5 lt. each), 1 for boots and 1 for helmets works without electricity
for a maximum of safety and reliability
Easyfresh
Disinfection Device for Boots
Basic device with two arms for boots.
7368-03
Easyfresh Option for Helmets
Flexible nozzle for helmets, including 5 lt. disinfection liquid
HELMET FRESH for helmets.
7368-0912-V01
Compressor Schneider Silent Master 100-8-6W
For Easyfresh disinfection device; compact compressor which suits into the frame of the Easyfresh.
33-100-331 1 x 230 V, 50 Hz, 0.55 kW, 0.75 HP
122
123
7
PROMOTIONAL MATERIAL
WINTERSTEIGER Workshop Apron
78-300-585
Ski Clip Racing Service
78-300-224 Alpine, green, 450 x 38 mm
78-300-227 NEW:
78-300-222 Cross Country, green, 38 mm
Ski-Zip
78-300-225
Anti Theft Device
With sturdy plastic housing, code number lock with 4 digits and stainless steel wire; the handy antitheft device for your winter sports equipment.
55-100-908
8
3
2
1
Workshop Service Sticker
With consecutive numbering, minimum order: 100 pcs., informs your customer about the service steps and the advantages of a service.
78-300-780 German, 22.5 x 6 cm
78-300-781 English, 22.5 x 6 cm
78-300-783 Italian, 22.5 x 6 cm
124
PROMOTIONAL MATERIAL
Tip Cover
Protects the edge and points to the perfect condition of the ski on collection.
Also reminds the customer laterabout the importance of the service.
78-300-220 16 x 30 cm, Material: Polypropylene fleece
Layout proposal www.wintersteiger.com
125
8
9
PRODUKT INDEX
2-Part Adhesives
Accessories for 2-Part Adhesive
Adapter for Bridges
Adjustable Rests for Double Ski Vice
Air Compressors
Air Dryer Kit
60
60
Air Pistol 86
Alpine-Screws 26
Alu-Oxyd-File 36
Analysis kit 93
Angle File Guide Set 36
30
31
82
20
Anti Theft Device
Anti Theft Device with code number
Araldit 2-Part Adhesive
Balancer 1-2 kg
Bar Wax
Barcode Labels
Base Cleaning Agent
Base Edge File Guide
Base Grinding Belts
Base Material for Punches
Base Planer
Base Polish Set
Base Repair Set
43, 112
8
64
32
33
34
28
124
124
30
17
103
113
Base Scraper with hard metal blade
Belt Dresser Stone
Belt Filter Discovery/ Mercury
Binding Bridges
Binding Bridges
Binding Control Device
Binding Drills
Binding Glue
Binding Spray
27
27
Biocide 95
Bit Holder
Bit Holder hexagonal
Bloc Wax
24
24
103
80 - 84
82
105
23
33
63
96
Board/Freeride Stopper
Boot Disinfection Device Easyfresh
Boot Fitting Device Ultracam
Boot Opener
Boot Repair Set
Bowden Cables
Brake Retainers
Brass Inserts
Bridge Adapters
Bridge Stand
Brushes 47
Brushes for Waxjet 101
Carbon Binding Bridge 80
Ceramic Discs
25
81
84
74
7, 20
122
52
54
54
88
28
Children Ski Bridge 83
Chisels 30
Clamp 28
Cleaning Card 106
Cleaning Plates
Cleaning Sieve
Cleaning Tube
Clean-Up Paper Roll
Clip for Printing Forms
Closed End Key
Colour paste for 2-Part-Adhesive
106
85
30
97
99
86
18
Combi Stone
Combi strips
Control Cables
Conversion Kit speedtronic-clamps
Cooling Device
Cordless Drill-Screw-Driver Fein 12 V
Cork Finish Belts
Cult dip bacterium measurement strips
65
93
Customer Cards Easyrent 111
Customer Labels for Thermotransfer Printer 112
Deburring Wheels 101
Deodorant 120
DESINEX Disinfection and Deodorizer Liquid 121
108
74, 77
21
38
93
88
Diamond Files 11
Diamonds 71
Diamonds for Skate Grinding Machine 111
Discman Edge Tuning Tool
Disinfection Liquid
Double Ski Vice
Dressing Diamonds
8
120, 121
20
70
Dummy Sole Workbench
Dummy Soles
84
82
Easystore Storage and Drying Systems 114 - 122
Emulsion 92
Emulsion Mixer 92
Endless Filter Sock 98
Exhaustion for Waxjet
Feed Wheel Rubbers
Fein Drill-Screw-Driver 12V
Fein Electronic Drill + Screw Driver
File Brush
File Guides
Files
Filter Bags
Filter Fleece
Filter Mats
Finn Files
Flexible Shaft Grinder Kit
Foam Cleaner Spray
Gauge Drill
102
88
21
21
34
36, 38, 39
10, 36 - 38
37
55
94
98
99
99
25
Grease Gun 89
Grease-Catrige 89
Grinding Belts 64
Grinding Block 34
Grinding Cooler
Grinding Stones
77
68, 69, 74, 76
Grinding Wheel for Skate Grinding Machine
109 - 111
Grip and Basket Mounting Tool
Gummi Stone
49
39
Hammer 30
Hand Brushes
Hand Cleaner
Hand Cleaning Wipes
Hand-Refractometer 92
Heating Plate 28
Heavy Duty Lubricating Grease 89
47
95
18
Helmet Fresh Disinfection Liquid
Holder for radial File 350 mm
Hole Plug Kit
Hollow Drill Bit
120
33
27
25
Hot Wax Belt
Icecut Files
102
36
Inserts 25
Labels for Thermotransfer Printer
Lacquer Sticks
Lasts for Ultracam
112
89
53
Liquid Wax 104
Lockers 119
Lubricating Spray
Lubrication additive for Discovery
94
94
Machine Cleaning Agent
Machinery Program
Magnet Filter
93
56 - 59
93
Magnetic Tool Holder
Metal Scraper Snowboard/ True Bar
17
46
Metal-Grip 32
Micro Breather
Mixer for Emulsion
Moonflex Belts
Moonflex-Files 37
Mounting Screws for Ceramic Discs 79
Mounting Vice
Moveable Drawer Cabinet
20
17
90
92
63
Multi-Inserts Snowboard
Neoval Lubricating Spray
Nylon Brush Waxjet
Order Forms
O-Ring for Support Roller
Panel Key
Paper Tape Racing Service
22
94
101
129, 130
87
85
48
126
PRODUKT INDEX
Paper-Roll Holder
PH-value measurement strips
Plastic Inserts
Plastic Plugs yellow
Pole Accessories
Pole Cutting Tool and Accessories
Polishing Belt shuttle
Polishing Belts
Polishing Brush
Polyethylene Wire
Polygun Repair Pistol
Power Pump
Pozidrive Screwdriver Bits
Prefilter Conversion Kit
Preservative Spray
Printer Ribbon
Printing Forms
Pro-Link Bridge Adapter
Prosharp Skate Grinding Machine
Protective Goggles
Punch Plate
81
109
97
30
Punches 29
Quick Sharp Extra File Guide 10
Radial File 33
94
107
105
43
23
98
49
49
102
65
101
61
31
18
93
25
27
Red Creek Roto Brushes 47
Refractometer 92
Repair Pistol Polygun 31
Repair-Pins 31
Repair-Strips black 32
Replacement Blade for Sidewall Planer
Riveter, Rivets and Eyelets
79
55
Roto Brushes Red Creek 47
Rubber Cutting for Vacuum Chuck Tunejet 85
Rubber Spray Guard 87
Rubber Workshop Mat
Sanding Paper for Grinding Block
Scotch Brite Wheels
17
34
101
Scotchbrite Belts
Scraper Sharpener
65
13
Screw Driver with wrench for Brass Inserts 25
Screwdriver 24
Screwdriver Bits 24
Screw-Driver Fein 21
Screwdrivers 24
Screws for Ceramic Discs
Screws Set Alpine
Screws Set Snowboard
Service sticker
Service-/Wax Bench
SFI Base Planer
Shoe and Helmet Disinfection Liquid
49
18
33
79
26
26
120
Shoe Fresh Disinfection Liquid
Shop Systems Easystore
Side Sharpener
Side-Edge Deburring and Polishing Belts
Side-Edge Grinding Belts
Side-Edge Tuning Belts
Silicone Paper
Skate Grinding Machine
Skate Grinding Wax
Ski Pole Accessories
Ski Pole Cutting Tool
63
63
31
109 - 111
109
49
49
120
118
8
63
Ski Retainer for DiscoveryConveyor Magazine 87
Ski Tip 125
Ski Vices 6
Ski-Clip 124
Skin Care 95
Skin Protection Set 95
Ski-Zip 124
Slik Wax 12
Snowblade Bridge
Snowboard Bridge
83
84
Snowboard Drill 110°
Snowboard Multi-Inserts
Snowboard Multi-Set
22
22
22
Snowboard Screws countersink
Snowboard Screws roundhead
Snowboard Squeegee
Spare Blade for SFI base planer
Spare Blades for punches
Spare Heel Release Belt
Spare Non-Slip Tapes
Spiral Tube
Spray Bottles for Disinfection and Deodorizer
86
Liquid 120
Spray Guard
Spray Guard Belt Side
Spray Paint
87
86
89
33
29
107
81
26
26
86
Stand for Skate Grinding Machine
Standard Clamp
111
108
STERIBIO Disinfection and Deodorizer Liquid 120
Sticker Binding Positioning
Storage Systems Easystore Flex
Straight Screwdriver Bits
Suction Cup Microjet
107
114 - 117
23
85
Support Roller
Support Roller Alpine
System Cleaner
Technicol 2-Part Adhesive
Thermo Jomax
Thermo Paper
Thermotransfer Catridges
30
44
112
86
87
95
112
Threading die 25
Threading die with Handle 25
Tibiameter 106
Tickets for Binding Testers 106
Tickets for Binding Testers
Tip Cover
Tool Box
Touch Pen
Trizact Finish Belts
True Bar
Tuning Belts
105, 106
125
48
97
64
34
64
Tuning Tools
Ultracam Boot Fitting Device
Universal Grinding Belt
Wall Mounted Paper-Roll Holder
Wax Belts
Wax Bloc Discovery, Tunejet
Wax Brushes
Wax for Waxjet
Wax Granulate
Wax Iron
Wax Remover
Wax Scraper
Wax Wheels
101
103, 104
104
12
104
46
101
6 - 14
52
64
18
102
74
Waxer 42
Waxing and Polishing Belts 65, 102
Waxing Fleece 102
Waxpro Waxer
WD-40 Lubricating Spray
Wooden Plug
Work Bench for Ultracam
42
94
27
54
Work Bench Frame and Accessories
Working Gloves
Workshop Apron
15
97
124
XC-Bridge 84 www.wintersteiger.com
127
9
VISIT THE WINTERSTEIGER WEBSITE
Click on the SPORTS tab and you will find:
Latest news on products, services and technologies
Fair dates
The complete machinery program
Solutions for the rental business
Accessories Shop
After Sales Services
Professional marketing support
Why Ski & Board Tuning?
References
www.wintersteiger.com
ORDER FORM
Personal Data
Client
Address
Phone-No.
Fax-No.
Product Order
Quantity Product name
Delivery Address
Desired Delivery Date
Date / Signature
Part-no.
Price Extended Price
Remarks www.wintersteiger.com
129
10
10
Remarks
130
ORDER FORM
Personal Data
Client
Address
Phone-No.
Fax-No.
Product Order
Quantity Product name
Delivery Address
Desired Delivery Date
Date / Signature
Part-no.
Price Extended Price
Success begins with the right decisions. At the right time.
We look forward to you!
Headquarters:
Austria: WINTERSTEIGER AG, 4910 Ried, Dimmelstrasse 9,
Tel.: +43 7752 919-0, Fax: +43 7752 919-52, [email protected]
International Companies:
Canada: WINTERSTEIGER Inc., CDN-Laval Q.C. H7L 5A1,
964 Bergar Street, Tel.: +1 450 6637800, Fax: +1 450 6632896, [email protected]
Germany: WINTERSTEIGER AG, Subsidiary Germany,
99310 Arnstadt, Alfred-Ley-Strasse 7, Tel.: +49 3628 66399 1970,
Fax: +49 3628 66399 1973, [email protected]
France: SKID-WINTERSTEIGER S.A.S., 73800 Ste. Hélène du Lac,
Parc d΄Activités Alpespace, Tel.: +33 479 25-1160,
Fax: +33 479 25-1161, [email protected]
Italy: WINTERSTEIGER Italia s.r.l., 39030 La Villa in Badia (BZ),
Strada Ninz, 82, Tel.: +39 0471 844 186, Fax: +39 0471 188 1664, [email protected]
Russia: OOO WINTERSTEIGER, Krzhizhanovsky Str. 14, Build. 3,
117218 Moscow, Russia, Tel.: +7 495 645 84 91,
Fax: +7 495 645 84 92, [email protected]
Switzerland: WINTERSTEIGER Schweiz AG, 6331 Hünenberg,
Chamerstrasse 44, Tel.: +41 41 780 23 22, Fax: +41 41 780 23 90, [email protected]
USA: WINTERSTEIGER Inc., 4705 Amelia Earhart Drive,
Salt Lake City, UT 84116-2876, Tel.: +1 801 355-6550,
Fax: +1 801 355-6541, [email protected]
Representations:
Argentinia, Australia, Benelux, Bosnia Herzegovina, Bulgaria, Chile, China, Croatia, Czech Republic, Denmark, Finland, Great Britain, Hungary, Japan, Macedonia,
New Zealand, Norway, Poland, Romania, Serbia, Slovakia, Slovenia, Spain, South Korea, Sweden. Contact details for our representatives are available on www.wintersteiger.com/sports.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement