Sharp Aquos LC-50LE650U Operating instructions

SHARP
AQUOS
LC-50LE650U
LIQUID CRYSTAL TELEVISION
T#LI-VISEUR ACL
mDOLSY
....................
L_
DIGITAL
1-41|11"111 .....
PLUS
IMPORTANT
: Please read this operation
IMPORTANT
: Veuillez lire ce mode d'emploi
avant de commencer
IMPORTANTE
: Lea este manual de operaci6n
antes de comenzar
..................................
manual before starting operating the equipment.
& utiliser I'appareil.
a operar el equipo.
LC-50LE650U
LiQUiD
CRYSTAL
TELEViSiON
ENGLISH
OPERATION
MANUAL
J
IMPORTANT:
To aid reporting
in case of loss or theft,
please
TV's model and serial numbers
in the space
numbers
are located at the rear of the TV.
IMPORTANT
i WARNING:
record the
provided.
The
INFORMATION
TO
OF FIRETO
ORRAIN
ELECTRIC
SHOCK, DO
NOTREDUCE
EXPOSETHE
THISRISK
PRODUCT
OR MOISTURE.
The lightning flash with arrow-head
symbol,
within an equilateral
triangle,
is intended
to alert the user to the
RISK OF ELECTRIC SHOCK
DO NOT OPEN
presence
voltage"
of uninsulated
"dangerous
within the product's
enclosure
that may be of sufficient
magnitude
to constitute
a risk of
electric shock to persons.
CAUTION:
TO
REDUCE
THE
RISK
OF ELECTRIC
DO NOT REMOVE
COVER
(OR
NO USER-SERVICEABLE
PARTS
REFER
SERVICING
TO QUALIFIED
PERSONNEL.
BACK).
INSIDE.
SERVICE
SHOCK,
The exclamation
point
(servicing)
instructions
literature
accompanying
CAUTION:
within
a
triangle
is intended
to alert the user
to the presence
of important
operating
and maintenance
in the
the product.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULYLINSERT.
WARNING:
FCC Regulations
approved
by the manufacturer
state that any unauthorized
changes
or modifications
to this equipment
could void the user's authority
to operate this equipment.
not expressly
(D-I
iMPORTANT
iNFORMATiON
CAUTION:
This product
satisfies
equipment.
To prevent
cables and connectors
FCC regulations
electromagnetic
for connections.
when shielded
cables
interference
with electric
and connectors
are used to connect
the
appliances
such as radios and televisions,
unit to other
use shielded
DECLARATION
OF CONFORMITY:
SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-50LE650U
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
For Business Customers: URL htt ://www.shar usa.corn
iNFORMATiON:
This equipment
has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This
equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the
instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment
does cause harmful interference
to radio or television reception, which can be
determined
by turning the equipment
off and on, the user is encouraged
to try to correct the interference
by one or more of the
following measures:
i
Reorient or relocate the receiving antenna.
i
Increase the separation between the equipment
and receiver.
-- Connect the equipment
into an outlet on a circuit different from that to which the receiver is connected.
i
Consult the dealer or an experienced
radio/TV technician for help.
FCC Compliance
Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received,
interference
that may cause undesired operation.
Wireless
including
Radio
For product available in the USA/Canada
market, only channel 1-11 can be operated. Selection of other channels is not possible.
This device is going to be operated in 5.15-5.25GHz
frequency
range, it is restricted in indoor environment only.
important:
Any changes or modifications
not expressly approved by the party responsible for compliance
could void the user's
authority to operate the equipment.
FCC Radiation
Exposure
Statement:
This equipment
complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
industry Canada
Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num6rique de la classe Best conforme & la norme NMB-003
du Canada.
Wireless
Radio
For product available in the USA/Canada
market, only channel 1-11 can be operated. Selection of other channels is not possible
The device could automatically
discontinue
transmission
in case of absence of information to transmit, or operational
failure.
Note that this is not intended to prohibit transmission
of control or signaling information
or the use of repetitive codes where
required by the technology.
Important: Any changes or modifications
not expressly approved by the party responsible for compliance
could void the user's
authority to operate the equipment.
IC Radiation
Exposure
Statement:
This equipment
complies with IC RSS-102
radiation
exposure limits set forth for an
uncontrolled
environment.
This equipment
should be installed and operated with minimum distance 20 cm between the radiator
& your body.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820 of the National
Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical."
This product
Setting
Q-2
qualifies
"TV Location"
for ENERGY
to "Home"
STAR when
allows
"Home"
is selected
the TV to achieve
for "TV Location".
an energy-saving
status
for household
use.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Liquid Crystal Television.
of trouble-free
operation of your product, please read the important
using this product.
iMPORTANT
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
SAFETY iNSTRUCTiONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Protect the power cord from being walked on or pinched padcicularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with the cadc, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device
shall remain readily operable.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas
vases, shall be placed on the apparatus.
Additional
Safety
17)
Sources--This
Power
information
product
should
be operated
only from
the type
marking
label. If you are not sure of the type of power supply
local power company.
For products
intended
to operate from
operating
instructions.
18) Overloading--Do
not overload
wall
can result in a risk of fire or electric
19) Object
and Liquid Entry--Never
touch dangerous
voltage
points
20)
outlets,
shock.
extension
this product
conditions:
from
a)
b)
When the AC cord or plug is damaged,
If liquid has been spilled, or objects
have fallen
c)
d)
If the
If the
e)
f)
has been exposed
does not operate
or integral
the wall
Parts--When
parfs specified
source
indicated
outlet
convenience
receptacles
and refer servicing
the
operating
(such
as they may
Never spill
to qualified
instructions.
in any way, and
in performance
- this
indicates
a need for service.
replacement
parts are required,
be sure the service technician
has used
by the manufacturer
or have the same characteristics
as the original
part.
checks to determine
that the product
mounting--Use
a wall mount bracket
as UL, CSA,
as this
instructions
as an improper
adjustment
extensive
work by a qualified
technician
Unauthorized
substitutions
may result in fire, electric shock,
or other hazards.
22) Safety Check--Upon
completion
of any service or repairs to this product,
ask the service
perform
safety
23) Wall or ceiling
on the
into the product,
to rain or water,
normally
by following
to restore the product
to its normal operation,
If the product
has been dropped
or damaged
When the product
exhibits
a distinct change
Replacement
replacement
of power
home, consult
your product
dealer or
power, or other sources,
refer to the
push objects
of any kind into this product through
openings
or short-out
parts that could result in a fire or electric shock.
liquid of any kind on the product.
Damage Requiring
Service--Unplug
service personnel
under the following
product
product
cords,
to your
battery
Adjust only those controls that are covered
by the operating
of other controls
may result in damage
and will often require
21)
To ensure safety and many years
Safety instructions
carefully
before
is in proper operating
condition.
that has been listed by an independent
technician
to
laboratory
ETL).
(D-3
iMPORTANT
SAFETY iNSTRUCTiONS
f
,, Outdoor Antenna Grounding -- If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70,
provides information with regard to proper grounding of the
mast and supporting structure, grounding of the leaddn wire
to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
EXAMPLEOF ANTENNA GROUNDING AS PER
NATIONALELECTRICALCODE ANSI/NFPA 70
ANTENNA
LEAD IN WIRE
GROUND
CLAMP
/_S
ANTENNA
DISCHARGE
'_
T
(NEC SECT,ON
UNIT
810 2¢
CONDUCTORS
EC SECTION
ELECTRODE
(NEC ART
810
21)
SYSTEM
250)
NEC -- NATIONAL ELECTRICAL
CODE
r
', Water and Moisture -- Do not use tills product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
,, Stand -- Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base
can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the
manufacturer.
• Selecting the location -- Select a place with no direct sunlight and good ventilation.
,, Ventilation -- The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper
ventilation is provided or the manufacturer's instructions are followed.
.. Tbe front panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with
impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat -- The product should be situated away from heat sources such as radiators, heat registem, stoves, or other
products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
• Lightning -- For added protection for this television equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to
the equipment due to lightning and power-line surges.
• Power Lines -- An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other Iqeavyitems.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
° Do not insert foreign objects into the product, inserting objects in the air vents or other openings may
result in fire or electric shock. Exercise special caution when using the product around children.
Precautions when transporting
the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always
,._!arty!heW b_twoptop_£
h2!d!!!
_itw_!h
twohp2_ -- OR£
h2n
2 on2_chs_2£2_!h
2W
_,
f
Caring for the cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause
cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water and
thoroughly wrung out, and then wipe with a soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers
_. inside the plastic may cause the cabinet to deform and cause the paint to peel off.
@-4
_,
iMPORTANT
SAFETY iNSTRUCTiONS
f
caring for the front panel
-• Turn
offwipe
tile main
power of
and
the AC
cord
fromcloth
the wall
outlet
beforeetc.).
handlhg.
_ _o._
_ ,
Gently
the surface
theunplug
front panel
with
a soft
(cotton,
flannel,
To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry
sheet type cloth, etc.). This may damage tile surface of the front panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty.
(it may scratch the surface of the front panel when wiped strongly.)
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800_BE_SHARP for
ordering, or VISIT http://www.sharpusa.com/SharpDirect.
CHILD
PROPER
SAFETY:
TELEViSiON
PLACEMENT
MATTERS
THE CONSUMER
ELECTRONICS
iNDUSTRY CARES
® Manufacturers, retailers and the rest of the consumer electronics industry are committed
to making home entertainment safe and enjoyable,
® As you enjoy your television, please note that all televisions - new and old- must be
supported on proper stands or installed according to the manufacturer's
recommendations. Televisions that are inappropriately situated on dressers,bookcases,
shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.
TUNE IN TO SAFETY
® ALWAYS follow the manufacturer's recommendations for the safe installation of your
television.
® ALWAYS read and follow all instructions for proper use of your television.
® NEVER allow children to climb ors or play ors the television or the furniture on which the
television is placed.
® NEVER place the television on furniture that can easily be used as steps, such as a
chest of drawers.
® ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
® ALWAYS route cords and cables connected to the television so that they cannot be
tripped over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
® ALWAYS contact your retaik_,rabout professional installation if you have any doubts
about your ability to safely mount your television.
® ALWAYS use a mount that has been recommended by the television manufacturer and
has a safety certification by an independent laboratory (such as UL, CSA, ETL).
® ALWAYS follow all instructions supplied by the television and mount manufacturers.
® ALWAYS make sure that the wall or ceiling where you are mounting the television is
appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or
cinder block construction. If you are unsure, contact a professional installer.
® Televisions carl be hea W, A minimum of two people is required for a wall or ceiling mount
installalion.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME
® Marly new television buyers move their older CRT televisions into a secondary
room after the pumhase of a flat panel television. Special care should be made
in the placement of older CRT televisions.
® ALWAYS place your older CRT television ors furniture that is sturdy and
appropriate for its size and weight.
® NEVER place your older CRT television on a dresser where children may be
tempted to use the drawers to climb.
® ALWAYS make sure your older CRT television does not hang over the edge of
your furniture.
CE.org/safety
CF_A_
(D-5
Contents
iMPORTANT
iNFORMATiON
...................
DEAR SHARP CUSTOMER
.......................
iMPORTANT
SAFETY iNSTRUCTiONS
........
1-2
3
3-5
QUICK REFERENCE
Attaching/Detaching
the Stand .................
QUICK INSTALIATION
TiPS ...................
Using the Remote Control Unit .................
7
8
8
Enjoying Photo/Music/Video
Playback
Connecting a USB Memory Device/
USB Hard Drive ..............................
35
Connecting a Home Network (DLNA) Server,,,
35
Select the Files to Play Back ...................
36
Playing Back Files
on a USB Memory Device .................
36--38
Playing Back Files
on a Home Network (DLNA) Server .......
39-40
Preparation
Antennas .......................................
Installing Batteries in the Remote Control Unit ....
9
9
Other Viewing Options
Presetting Remote Control Function ...........
Operating the Connected Equipment .......
41
41-42
Using AQUOS LiNK
Controlling HDMt Equipment
Using AQUOS LINK .......................
Link Operation Menu .......................
43-45
45-46
Supplied
Accessories
............................
Part Names
IV (Front) .....................................
IV (Rear/Side) .................................
Remote Control Unit ...........................
Introduction
7
10
10
11
to Connections
Experiencing HD Images ......................
Types of Connection ..........................
Displaying an External Equipment Image .......
12
12
12
Connecting
to External Equipment
Connecting a Blu-ray Disc/DVD Player or
HD Cable/Satellite Set-top Box ...........
13--14
Connecting a VCR, Game Console,
Camcorder or Cable/Satellite Set-top Box .... 14
Connecting an Audio Amplifier .................
15
Connecting an AV Amplifier ....................
15
Connecting a PC ..............................
16
Watching
TV
Turning On/Off the Power .....................
Initial InstaNation ...............................
Direct Button Operation
Changing Channels
.......................
Changing Volume ..........................
MUTE ......................................
Sleep Timer ................................
AUDIO ....................................
FLASHBACK ...............................
FREEZE ....................................
Smart Central ..............................
INPUT .....................................
Closed Captions and
Digital Closed Captions ...................
AV MODE ..................................
VIEW MODE ............................
On-Screen
Display Menu
On-Screen Display Menu Operation ...........
Menu Operation Buttons ......................
Menu Items ...................................
Picture Settings ............................
Audio Settings ................................
Power Control .................................
Syslem Options ............................
Initial Setup .................................
Information .................................
Using a PC
Displaying a PC image on the Screen ..........
Adjusting the PC Image .......................
PC Compatibility Chart ........................
Setting Audio Input ...........................
RS-232C Port Specifications
..................
Using the Internet
Connecting to the Internet ..................
Internet Setup .................................
Displaying Updated Information and
Support Service ..........................
Using Applications Via the Internet .........
47
48
48
48
48
50--51
52
52-54
55-56
Appendix
17
17
19
19
19
19
19
20
20
20
20
20
21
21-22
Setting the TV on the Wall ....................
Troubleshooting
Trademarks
............................
57
58-59
......................................
60
Specifications
T_
............................................
Wireless
61
LAN ..................................
Information
on the Software
License for
This Product .................................
Calling for Service ...............................
LIMITED WARRANTY
............................
62
63-64
65
66
Dimensional
Drawings
• Tile dimensional drawirlgs for tile LCD TV set are shown
on the inside back cover.
23
23
24
25-26
26
26
27-28
28-32
32-34
The actual
the
illustrations
operations.
and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
Q-6
Supplied
Make
sure
the
Accessories
following
Remote control
(x 1) Page8
accessories
unit
are provided
"AAA" size battery
(x2) Page9
with
the
product.
Stand unk
(xl)
Page7
Operation manual
(xl)
Connection
(xl)
guide
,, Always use the AC cord supplied with the TV.
,, The illustrations above are for explanation purposes and may vary slightly from the actual accessories.
QUICK REFERENCE
•
•
Before
Before
attaching
(or detaching)
tile stand,
performing
work spread cushioning
• Attach
the stand
• Be sure
to follow
FV face
in the
the
correct
Put the
2,
Adjust
the
FV stand
down
to the
3,
Fasten
the
screws
by using
k from
being damaged.
direction.
instructions.
1,
unplug tile AC cord.
over the base area to lay the TV on. This will prevent
Incorrect
on a safe
surface
bottom
of the
a cross-head
installation
that
of the
is covered
stand
may
by a soft and
result
in the
smooth
cloth.
TV falling
over.
'FV.
screwdriver
(Not
supplied).
db
®
• Do not push too hard or put excessive
the most comfortable
viewing
angle.
• When
you are going
to assemble
pressure
or disassemble
to the
stand
it,you
need
neck
to avoid
to take
hold
the
damages
of it tightly
when
in case
you
turn
the
TV for
of drop.
• To detach the stand, perform the steps in reverse order.
(D-7
QUICK
REFERENCE
1 Attach your antenna to the back of the television.
(See page 9.)
2 Connect
outlet.
the AC plug for the television
into the AC
Use the
remote
remote
prevent
remote
control
control
proper
control unit by pointing it towards the
sensor on the ]V, Objects between the
unit and the remote control sensor may
operation.
Remote control sensor
,'_ 7"-f
-/
- Place the TV close to the AC outlet, and keep the power
plug within reach.
'.....
/_\
\
/ 1/
(b m)
.,-.-----_/v'30_
_-0
_*
- TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3
When turning on the ]V for the first time, press
POWER on the television,
m
O
8
8
8
8
8
* The angle is 8 ' when the stand is attached.
A
[]
=POWER
4.
Cautions
regarding
the
remote
control
unit
Do not expose the remote control unk to shock. In addition,
do not expose the remote control unk to liquids, and do not
place in an area wkh high humidity.
Do not install or place the remote control unit under direct
sunlight. The heat may cause deformation
of the remote
control unit.
The remote control unk may not work properly if the remote
control sensor on the TV is under direct sunlight or strong
lighting, in such cases, change the angle of the lighting
or the TV, or operate the remote control unk closer to the
remote control sensor.
Insert the batteries into the remote control unit. (See
page 9.)
- Speakers cannot be detached from the TV.
• The TV angle cannot be adjusted.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON _ UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
Q-8
Preparation
To eqoy a clearer picture, use an outdoor antenna, The following is a bdd explanation of the types of connections
that are used for a coaxial cable, if your outdoor antenna uses a 75--ohm coaxial cable with an F.type connector,
plug it into the antenna terminal at the rear of the TV set, For connecting the antenna cable to the TV, use
commercially available cables,
('Connecting
Antenna
• Connect
the antenna
(1) Cable
--
without
Cable
cable
to the TV using
a CATV
one
of the methods
Cable TV lead In
converter
in the illustration
as shown
(_,
_,
_
or {4}).
tH_r_'ieaAn(;5nnhm)
_
_
_C_e
_
t
t
_-;
"=1
|
teemrminal
(75 ohm)
1
h_
_3_ Combination
UHF antenna
VHF/
"_i_
1 7_al
Coaxial cabb
cablo (round)
|
VHF/UHF
Separate
VHF
antenna
UHF
%
300
NTENNA ANTENNA_
ohm
|
twinqead cable
s00
_" ,
_
:-
|
I
|
_
|
1
_
|
......................
T _
:
/
300/75-ohm adapter
_300
ohm twin load cable (flat)I
@
/'
'--4
T_oTV antenr, a
Combiner
terminal
|
J
rl .A 75-ohm
system
is generally
that can easily be attached
2.A
300-ohm
system
to a 75-ohm
a round
cable
to a terminal
is a fiat "twinqead"
terminal
through
with
without
cable
a 300/75-ohm
F-type connector
iF-type
tools.
_
connect,ng
connector
If tools
__ircuilg
F-type
.
the
wffh
are used,
connector
RF cable
should
to the
]V
damage
be
set,
finger-tightened
,
do not tighten
twinqead
to your
TV set.
(The
(fiat)
|
/_-_
_'
/
|
/
breaking
F-type
connector
..... ::_
_
|
-/'_,
|
.....
75-ohm
If the remote control fails to operate FV functions,
cable
only.
F4ype
etc.)
1 Open the battery cover.
(round)
|
G_
cause
"_
cable
adapter.
tools.
it may
coaxial
that can be attached
300-ohm
When
connector
75-ohm
coaxial
<
|
cable
.J
replace the batteries in the remote control unit.
2 Insert two "AAA" size bafteries
the product),
•
(supplied with
3 Close the battery cover.
Place the batteries
wkh their terminals
corresponding
to the ( I )
and (-)indications
in the
battery compartment.
improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries
in old batteries.
•
below.
or cause
Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact
rash. If you find any chemical leakage, wipe thoroughly
wkh a cloth.
• The batteries supplied with this product may have a shorter life expectancy
due to storage conditions.
• If you will not be using the remote control unk for an extended period of time, remove batteries from it.
with
chemical
leakage
skin can cause a
(D-9
Part Names
©
i
O
,Fro
OPC*
POWER
* OPC: Optical Picture Control ( See page 25.)
INPUT
5
USB
terminals
Im
(COMPONENT/AV)_
i,.-mpuT5_
_._1
_ +
i[
AUD,O
PC,
HD_,
+®1 _ +
terminal
*2
Oh .....
buttons
]
iy
+
_
(shared
for
_'_11
_
u+
terminal
!/
i mP_
i
_
+
_
(HDMI)
terminal
(HDMI)
INPUT2
PC in and HDMI)
|
_]
inPuT
OH
'_'\
buttons
,+°++
terminal
INPUT
3
/OL|
_vo_+,->
_j _|
MENU
=
[ /
_ |
_:::
,+u,bUtt°n
+ ,_ _+,
button
_j -_
POWER= i_
]
terminal(HDMI)
INPUT 4
ARC
..........
_ I_/
_|
terminal
_RS-2320
_
RS-232C
IO_1
®
ETHERNET
(+_I00)
I
DIGIT_
AUDIO
®
o
ANTJCAB_
HEAD
PHONE
OUTPUT
I
I
ETHERNET
DIGITAL
Antenna
terminal
AUDIO
OUTPUT
terminal
Cable
I
HEAD
in
PHONE
terminal
"1 See pages 13 to 16 and 43 for external equipment connection.
*2 See pages 17 and 23 for button operations.
O-10
IOIOI
Part Names
2
rv,
STB, DVDoVCR,
control
(See pages
1
AUDIO:
Switches
registration
mode,
an appropriate
button (STB,
DISPLAY
at the same time.
External
equipment
external
2_
4
3_
operation.
41 to 42 for details.)
* To enter the code
3
the remote
for TV, STB, DVD, BD, VCR and AUDIO
you need to press
DVDoVCR
operational
or AUDIO)
buttons:
and
Operate
the
equipment.
OPTION:
Display the Link Operation
button
will function
only when
pages
43 to 46 for details.)
5
SLEEP:
6
0-9:
Set the sleep
7
• (DOT):
8
CO: Display captions
timer.
Set the channel.
Menu
AQUOS
screen.
This
LINK is used. (See
(See page 19.)
(See page 19.)
(See pages
19 .)
from a closed-caption
source.
(See
page 20.)
9
AV MODE:
Select
an audio or video setting.
(See pages 21 and 25.)
24
_
10
11
12
MUTE
...........................
t0
MUTE:
tt
VOL +/-
Mute the sound.
t2
MENU:
t3
USB:
t4
A/V/4/I_,
t5
EXIT:
t6
FAVORITE
t7
A, B, C, D: Select
(See page
: Set the volume.
Display the menu screen.
Direct switch
a desired
item on the screen.
screen.
4 preset
channels.
favodte
(See page 29.)
channels
in 4 different
(See page 29.)
While watching,
pressing
Select
menu
(See page35.)
CH: Set the favorite
categories.
(See page 23.)
USB source..
ENTER:
Turn offthe
19.)
(See page 19.)
you can toggle
the selected
channels
A, B, O and D. The every key of the favodte
by
can
select the many channels.
t8
DISPLAY:
t9
POWER
Display the channel
(SOURCE):
equipment
20
2t
Set the still image.
screen.
AUDIO:
information.
the power
of the external
on and off.
FREEZE
normal
Turns
Press
again to return to
(See page 20.)
Display
the MTS/SAP
setting
menu.
(See page 19.)
22
ENT: Jumps
buttons.
23
FLASHBACK:
input
24
to a channel
Return
mode.
VIEW
after selecting
to the previous
with the 0-9
channel
or external
(See page 20.)
MODE:
Select
the screen size. (See pages
21,
22
and 47.)
25
INPUT:
Select
HDMI3,
HDMI4,
Network
• When
1
using
POWER:
page 17.)
the remote
Switch
control
the TV power
unit, point
[t at the TV.
on or enter standby.
26
CHA/V:
27
Smart
(See
a TV input
(DLNA),
USB)
Select
Central:
source.
COMPONENT/AV,
Display
PC IN,
(See pages
the channel.
(-rv, HDMI1,
12 and 20.)
(See page
the Smart
HDMI2,
Home
Central
19.)
window
( See page 20. )
28
RETURN:
Return to the previous
29
NETFLIX:
NETFLIX
30
FAV APP
1, 2, 3: You can assign your favorite
applications
to these
menu screen.
HOT KEY.
buttons.
(See page 29.)
(D-11
Introduction
to Connections
An HDTV without an HD source is just an ordinary
TV,
To enjoy HD images on the TV, you should get HD programming
. Over--the--air broadcasling via HD quaN-y antenna
HD cable/satellite subscription
HD compatible external equipment
from
the following:
* For information on updating to HD programming, ask your cable/satellite service provider.
Image quaN-y differs depending on the terminal used. To enjoy clearer images, check the output terminals
external equipment and use its appropriafe terminals for higher quality images.
For connecting the TV to external equipment, use commercially available cables.
* The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
INPUT
HD
_
Quality
HDMl-certified cable
12
_
34
_
M_rnl
of your
_, Page t3
H_ml
d
O 3.5 mm stereo mini jack cable
AUDFO
INPUT
DVI
DVI-HDMI conversion cable
OUT
_ _coM_o.,
_
_
0dio
cab,e
Component video cable
12
_
34
_
_
_'_
_ Page t3
* Page.
,.PUTB_
Standard
Quality
_® ®_ ®
AUDIO
._Paget4
VIDEO
AV cable
_
To view external source images, select the input source by pressing
Example
INPUT
!i
on the remote control unit or on the TV.
1 Press INPUT,
The INPUT list screen displays.
2 Press A/T to select the input source.
You can also select the input source by pressing
INPUT. Each time INPUT is pressed, the input source
toggles.
HDMI1 ._. HDMI2 ._. HDMI3 ._ HDMI4 ._. C©MP/AV
TV _
©_©
O-
12
DLNA_USB
An image from the selected
displays.
source automatically
PC IN
Connecting to External Equipment
You can connect many types of external equipment to your TV, To view external source images, select the input
source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.)
For connecting the TV to external equipment, use commercially available cables.
,, To protect equipment, always turn off the TV before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
[] When using HDMI cable (INPUT 1, 2, 3 or 4}:
The HDMI (High Definition Multimedia interface) terminal is an audiowideo interface that enables a connection for audio and video
signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
_
HDMI-certified
cane
• To enjoy 1080p display capability, connect your external equipment using an HDMbcertified cable or a component cable and
set the equipment to 1080p output.
• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.
• When you connect ARC-compatible equipment, use INPUT 4.
[] When
using
DVI-HDMI
conversion
cable
(INPUT
1, 2, 3 or 4):
" Blu-ray disc player
= DVD player
• HD cable/satellite
set-top box
• When using a DVbHDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVPHDMI conversion cable to the iNPUT 1, 2, 3 or 4 terminal, connect a D 3.5 mm stereo mini jack cable to
the AUDIO PC/HDMI terminal and set "Audio Select" to "HDMl+Analog". (See page 46.)
(D-
13
Connecting
toExternal
Equipment
[] When using Component
cable (INPUT
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
5):
Y (Green)_\_........_
J
Component video cable
AUDIO-R (Red)z,,,,,,,,,J
.__1_
- To enjoy 1080p display capability, connect your external equipment using an HDMbcertified cable or a component cable and
set the equipment to 1080p output.
- See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.
[] When
• Game
using
console
• Camcorder
Composite
cable
(INPUT
• Cable/Satellite
set-top
AV cable
®®LI
iiii!i!
Q-
14
5):
• VCR
_iii,il
box
Connecting
[] When
to E×ternal
using
It is possible
outputs
Digital
to output
from
Equipment
coa×ial
audio
cable:
through
the
DIGITAL
AUDIO
OUTPUT
Depending
on the connected
In this case,
Coaxial
cable
[] When
(See
page
27 for
details.)
set the audio
digital audio
using
equipment,
formats
will be output
audio
PCM
audio
iiiiiiill iiii_ii!ii!i!i!
!!!!iiiiiiiiii i
Digital coaxial
•
terminal.
the terminal.
audio will not output
of the connected
in 2-ch
stereo
from
equipment
when
cable
it is from
the DIGITAL
to PCM,
AUDIO
32/44.1/48
the external
OUTPUT
terminal
in HDMI
connection.
kHz.
equipment
connected
to the TV using
an HDMI
cable:
Audio
cable
HEAD
PHONE
- See page
28 for details
HD Cable/Satellke
on the Output
set-top
Select
function.
box
"_....
iil}
HDMI-certified
•
-
cable
If the image is not in sync with the audio, check the settings of the connected
Letting the TV output the audio to an AV amplifier:
When you connect ARC compatible
equipment,
use the INPUT 4 terminal,
If the equipment
to be connected
is not compatible
with the ARC, connect
surround
.....
system.
a digital coaxial
cable,
(D-15
Connecting
to E×ternal
Equipment
Refer to page 48 for a list of PC signals compatible
[] When
using HDMI
cable
(iNPUT
with the ]V,
iiiii!iiiiii!iiiiiiiiiiiiiiiiiiiiiiiii!
1, 2, 3 or 4):
ii/iiiiiiiliiiiiiiiiiiiiiili_!i
HDMI-certified cane
_
m
!i
ii iiiiiiiiiiiiii:
- Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMbcertified cable
to the INPUT 1, 2, 3 or 4 terminal, connect a G 3.5 mm stereo mini jack cable to the AUDIO PC/HDMI terminal and set
"Audio Select" to "HDMl+Analog". (See page 28.)
- The HDMI terminals only support digital signal.
[] When
using DVI-HDMI
_
_.[
conversion
_
cable
_V'-
(INPUT
_
1, 2, 3 or 4):
conversion
Q 3.5 mm stereo
cable
mini jack cable
- When using a DVbHDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting a DVI-HDMI conversion cable to the iNPUT 1, 2, 3 or 4 terminal, connect a © 3.5 mm stereo mini jack cable
to the AUDIO PC/HDMI terminal and set "Audio Select" to "HDMl+Analog". (See page 28.)
[] When
using
analog
RGB cable
(PC IN):
Ana,og
RGB
cable
- When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of PC iN.
- When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 28.)
Q-
16
Watching
•
POWER
TV
0
0
-
"®
Country
-
(On/Standby)
POWER
PowR
CZ3_
STB DVD,VOR
c_
czl AUDIO
czl
Press A/V
to select the desired Country listed on the
screen, and then press
0
0
0
0
DISPLAY SOURCE)
[_
2
m
ENTER.
o
0
6
8
OPTION
SLEEP
AUDIO
FREEZE
POWER
Time
Press POWER
the power
on the TV or on the remote
control
zone
unit to turn
3
on.
Press A/V
to select the desired Time zone listed on
the screen, and then press ENTER.
The Initial Installation starts when the TV powers on for the first
time. If the TV has been turned on before, the Initial Installation will
not be invoked. For changing the settings of the Initial Installation,
perform "EZ setup" on the Initial Setup menu on page 28.
Press
POWER
on the TV or on the remote
to turn the power off.
° The TV enters standby
control
unit again
and the image on the screen disappears.
If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
Weak electric
turned off.
power
is still consumed
even when the TV is
When you turn on the TV for the first time, k will automatically
memorize the broadcasting
channels available in the region
where
you live. Perform
POWER
on the remote
the following
control
steps
before you press
insert the batteries into the remote control unit. (See page 9.)
2.
3.
Connect the antenna cable to the TV. (See page 9.)
Hug in the AC cord to the AC outlet. (See page 8.)
Select
1
(Language
from among
Select "Home" or "Store" for the location where you plan
to install the TM. This product qualifies for ENERGY S%AR
in Home mode default setting.
4
Press A/Y
to select "Home" or "Store".
Press ENTER to enter the setting.
unk.
1.
Language
"iV Location
setting)
3 languages:
English,
French
and Spanish.
PressA/Y
to select the desired language listed on the
screen, and then press ENTER.
Home: "Power Saving" is set to "On", and AV MODE is
set to "STANDARD(ENERGY STAR)".
Store: "Power Saving" is set to "Off" and AV MODE is
set to "DYNAMIC (Fixed)".
(_])- 17
Watching
TV
Completed
® ENERGY STAR qualification is based on AV MODE
"STANDARD(ENERGY STAR)".
Air/Cable
(Antenna
setting)
Make sure what kind of connection
f_/when selecting "Air" or "Cable".
5
Press A/Y
8
After setting complete.the
Completed.
screen will show EZ setup
is made with your
to select "Air" or "Cable".
Press ENTER to enter the setllng.
If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again,
(See page 29.)
CH Search
(Channel
search)
Channel auto search makes the TV look for all
channels viewable in the set area,
6 When
"Air"
or "cable"
is selected
in Antenna
setting:
Press A/V
to select "Start", and then press ENTER.
Network
7 Press A/V
or not
to select set up the connection settklg
when you set up connection setting,you
A/T to change connection type.
Q-
18
can press
For changing the settings of the initial InstaNa_ion,
perform "EZ setup" on the initial Setup menu on
page 29,
Direct Button Operation
OPTION
SLEEP
AUDIO
FREEZE
Allows you to set a time when the TV automatically
switches to standby.
Press SLEEP,
m@@
@@@
The remaining time displayswhen the sleep timer has been set.
Each time you press SLEEP, the remaining time switches
as shown below.
Off _ 30.-_ 60.-_ 90 _. 120
t
i
Sma_
Centra]
When set, the time automatically starts counting down.
If you want to adjust the sleep timer, you can press SLEEP
twice then change the time setting.
• Select "Off" by pressing SLEEP to cancel the sleep timer.
The TVwill enterstandby when the remainingtime reachesO.
You
can change
Method
channels
in several
ways.
1
Using CHA/V
Method
2
on the
remote
control
unit
or on the ]_/.
Using remote
control
buttons
0-9, _ (DOT).
Examples:
To select a t or 2-digit channel number (e. g., Channel 5):
Press 5 ---> ENT.
To seJect a 3-digit channel number (e. g., ChanneJ 115):
Press t --_ 1 ---> 5 ---> ENT.
To select a 4-digit channel number (e. g., Channel 22.t):
Press 2 _
2 _
• (DOT} _
t _ENT.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
When you enter 0-9 only, channel selection will be made if
there is no operation within a few seconds.
If you push %" by itself, nothing will happen.
Complete the above steps within a few seconds.
When you enter 0-9 and ,, (DOT), channel selection will be
made if there is no operation within a few seconds.
You can change the volume by pressing
the ]V or on the remote control unit.
To increase the volume, press VOL +.
To decrease the volume, press VOL -.
VOL+/-
on
[] MTS/SAP stereo mode
The FV has a feature that allows reception of sound
other than the main audio for the program, This feature
is called Multi--channel Television Sound (MTS). The ]V
with MTS can receive mono sound, stereo sound
and Secondary Audio Programs (SAP). The SAP feature
allows a TV station to broadcast other information,
which could be audio in another language or something
completely different like weather information.
You can enjoy Hi-Fi stereo sound or SAP broadcasts
where avaiJable,
,, Stereo broadcasts: View programs like live sporting
events, shows and concerts in dynamic stereo sound.
• SAP broadcasts: Receive TV broadcasts in either MAiN
or SAP sound.
MAiN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
If stereo sound is difficult to hear,
Obtain a clearer sound by manually switching to fixed
mono-sound mode.
You can change MTS as shown below to match the
television broadcast signal.
Press
ENTER
to toggle
between
Examples:
when receiving
STEREO mode: STEREO<,_
Mutes the current sound output.
Press MUTE,
• ,,(_,, will be displayed on the screen, and the sound is
silenced.
Mute can be canceled by pressing VOL+/-
or MUTE.
STEREO
+ SAP mode:
audio modes.
MTS and
MONO
SAP
ST(SAP) ,-_ SAP(ST),-_
t
MAIN + SAP mode: MAIN,_
MONO mode: MONO
MONO
I
SAP
[] Digital broadcasting
audio mode
The types of audio transmitted in a digital broadcast include
SURROUND as well as MONO and STEREO. In addition, it
is possible for multiple audio tracks to accompany a single
video track.
Press ENTER to toggle between audio modes.
Example: when receiving Digital broadcasting
STEREO (Audio1) .m STEREO (Audio2)
t..,,,,.. SURROUND (Audio3)"J-.I
- MTS only operates while in TV mode.
@-
19
Direct Button Operation
Press FLASHBACK
to switch to the previously tuned
channel.
• Press FLASHBACK againto switch backtothe currently
tuned channel.
• FLASHBACK will not work if no channel has been
changed after the TV is turned on.
Allows you to capture and freeze a moving image that
you are watching,
Press FREEZE,
• A moving image is captured.
Press FREEZE again to cancel the function.
When this function is not available, "No Function." will
display.
If you are using the freeze function and a broadcast
activates the V-CHIP BLOCK, the freeze function will be
canceled and a V-CHIP BLOCK message will appear.
• You can have the same settings by choosing "Freeze" on
the menu kems. (See page 27.)
Allows you to directly activate
applications,
1 Press Smart
window.
Central
various types of
to display the smart central
2 Press A/Y/_/_to select the desired application,
and then press ENTER.
• If "_!" is displayed after you switch to USB mode,
check the USB connection.
• If "_"
or "[]_"
is displayed after you switch to Home
Network (DLNA) mode or after you connect to the Intemet,
check your TV's network settings and connection.
• See pages
35 to 39, 52, 53 for details
of viewable
Your TV is equipped with an internal Closed Caption
decoder, it allows you to view conversations,
narration
and sound effects as subtitles on your TV, Closed
Captions are available on some FV programs and on
some VHS home video tapes at the discretion of the
program provider.
Digital Closed Caption service is a new caption service
available only on digital TV programs (also at the
discretion of the service provider). It is a more flexible
system than the original Closed Caption system,
because it allows for a variety of caption sizes and font
styles. When the Digital Closed Caption service is in
use, it will be indicated by the appearance of a 3qetter
abbreviation that also indicates the language of the
Digital Closed Captions: ENG (English), SPA (Spanish),
FRA (French) or other language codes.
Not all programs and VHS videotapes offer closed
captions. Please look for the "_"
symbol to ensure
that captions will be shown.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The "CC1" and "CC2" services display
subtitles of ]V programs superimposed
over the
program's picture.
In the Closed Caption system, the "Text 1" or "Text2"
services display text that is unrelated to the program
being viewed (e,g., weather or news), These services
are also superimposed
over the program currently
being viewed.
1 Press CO,
- This will present the Closed Caption information display.
2 Press CC while the Closed Caption information is
still on the screen,
- Press repeatedly until you select the desired closed
caption service.
applications.
• You can display the application
window by choosing
" Smart Central " on the menu items. (See page 27.)
• When this function
function
now"
is not available,
"Can not operate
this
Closed Caption
information
will display.
To view external source images, select the input source by
pressing INPUT on the remote control unit or on the TV.
1 Press INPUT,
• The iNPUT list screen displays.
2 Press A/Y or press INPUT again to select the
input source.
• An image from the selected source automatically
displays.
• Each time INPUT is pressed, the input source toggles.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by its
own number. The "CC1" to "CC4" services display
subtitles of TV programs superimposed over the
program's picture, in the Closed Caption system, the
"TEXT1" to "TEXT4" services display text that is unrelated
to the program being viewed (e.g., weather or news).
These services are also superimposed over the program
currently being viewed.
• See pages 12 to 16 and 43 for external equipment
connection.
m-m-m-m-B-im-iD-i_-mi
Example:
ANALOG
t
!
DIGITAL
m-E-m-m-ii-lm-lm-li
I
m-m-m-m-m,-m-m
Q-
20
!
Direct Button Operation
AV MODE
gives
which
vary
can
external
Press
•
you
due
several
viewing
to factors
to choose
from
brightness,type
to best
match
of program
the
watched
surrounding
or the type
environment
of image
input
of the
TM,
from
equipment,
AV
MODE,
Current
Press AV MODE
Example:
When
AV
again before
the
input
MODE
source
STAR) ,--_MOVIE
STAR)
STAR):
MOVIE:
For a movie.
GAME:
Lowers
displayed
on the screen
is TV, COMPONET/AV,
STANDARD(ENERGY
STANDARD(ENERGY
displays,
the mode
STANDARD(ENERGY
PC:
options
like room
,--_GAME
disappears.
The mode
PC IN or HDMI
,--_PC
,--_
DYNAMIC
,--_
changes
as shown
below:
1 to 4
DYNAMIC
(Fixed) ,--_ USER ,--_
For a highly defirled image in a normal lighting.
image brightness
for easier viewing.
For PC.
USER:
Allows
DYNAMIC:
DYNAMIC
the user to customize
For a clear-cut
(Fixed):
settings
as desired.
image emphasizing
Changes
the image
You can set the mode
high contrast,
and sound
settings
useful for sports
to the factory
for each
input source.
viewing.
preset
values.
No adjustments
are allowed.
You can select a different AV MODE item for each input mode. (For example, select STANDARD(ENERGY STAR) for TV input
and DYNAMIC for COMPONENT.)
When you play games, "GAME" is recommended for AV MODE.
• You cannot set "GAME" or "PC" when the TV is connected to the Internet or when the input source is "Home Network (DLNA)" or
"USB".
• You can have the same settings by choosing "AV MODE" on the menu kems. (See page 25.)
You can select the screen size.
1 Press VIEW
0so _
o%11,
MODE,
The View Mode menu displays.
The menu lists the View Mode options selectable for the type of video signal currently
being received.
2 Press VIEW MODE or A/T while the View Mode menu is displayed to select a
desired item on the menu.
• You can sequentially select a View Mode that has its own aspect ratio.
• You can have the same settings
EXIT
[]
For
by choosing
"View Mode" on the menu items.
(See page 27.)
RETURN
HD
programs
Stretch
Dot by Dot (Full
Screen)
S.Stretch
)
(Smart
stretch)
Zoom
L
i
i
Suitable for viewing widescreen 1.78:1 aspect ratio
Dot by Dot (1080i/p
Detects the resolution
program, stretch mode will still
show very thin black bands
signal and displays an image
with the same number of
at the top and bottom
screen.
pixels on the screen.
Full Screen (720p only): You
carl select "Full Screen" only
of the
when
receiving
only):
of the
Suitable for stretching 4:3
programs
to fill the screen.
Suitable for viewing widescreen 2.35:1 aspect-ratio
programs
in full screen.
a 720p signal.
When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please
change view mode to correct this.
(_)-
21
Direct Button Operation
[]
For
4:3
Example:
programs
Screen
size
images
Normal
S.Stretch
(Smart
Zoom
stretch)
Stretch
o oo
Sukable for viewing
conventional
4:3 programs
their normal format.
[]
For
Sukable for stretching
4:3
programs
to fill the screen.
in
Suitable for viewing widescreen 2.35:1 anamorphic
DVDs in full screen.
This mode is useful for 1.78:1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
USB-Video,DLNA-Video
Example:
Screen
size
images
Normal
S.Stretch
(Smart
Zoom
stretch}
Stretch
Z
Suitable
for viewing
Sukable
conventional
4:3 programs
their normal format.
in
programs
for stretching
4:3
Suitable
to fill the screen.
for viewing
wide-
screen 2.35:1 anamorphic
DVDs in full screen.
This mode is useful for 1.78:1
DVDs. When viewing 1.85:1
DVDs, stretch mode will still show
very thin black bands at the top
and bottom of the screen.
[] For PC input mode
• Connect the PC before making adjustments.
• Selectable
screen size may vary with input signal type.
Example:
Screen
Input signal
size
images
Normal
U
4:3
Keeps the original
aspect ratio in a full
screen display.
Cinema
22
Dot by Dot
LC J <)
For viewing
widescreen
An image fully fills the
screen.
Detects the resolution
programs. The top
and bottom of the
of the signal and
displays an image with
the same number of
image is cropped.
pixels on the screen.
Input signal
Normal
Dot by Dot
16:9
An image fully tills the
screen.
Detects the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
Q-
Full Screen
On=Screen Display Menu
Example
Example
®
1
Press
2
_1) Press
MENU
4/_
to displaythe
to select
the
_2) Press
A/Y
to select
a specific
screen,
desired
menu,
adjustment
item,
(2) Item displayed
• This indicates
• Press ENTER
in blue
the item currently selected.
to go to the adjustment screen for this item.
(3) Item in brackets
• This indicates
the current
display,
(4) Item displayed
• This indicates
in white
that the kern can be selected.
• Operations
vary depending
on the function or _em.
Refer to the guide display corresponding
to the
menu setting screen for button operations.
(5) Item displayed
• This indicates
in gray
that the kern cannot
and
then
press
• Addkional
displayed.
_3) Adjust
3
MENU
(1} Guide
display
• This indicates the buttons that can be operated on the
displayed
screen. The guide display varies depending
on the menu setting screen.
• The operations
fer some selected items may be displayed
in the operational guide bar at the bottom of the screen.
Press
the
MENU
ENTER,
related adjustment
Press
item
A/T
while
kems
may be
to select the desired
referring
to the
item.
guide
to exit,
setting
for the item.
be selected.
There are various reasons why the kems cannot be
selected, but the main reasons are as follows:
--Nothing
is connected
to the selected input terminal.
--The function is not compatible with the current input signal.
• Menu options differ in the selected input modes, but the operating procedures are the same.
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly
from the actual screens.
The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of
the items on the screen.
Using
the
remote
control
Use the following
buttons
operate
the menu,
on the
remote
control
to
Central
Smart
Using the control panel of the main unit
You can also operate the menu with the control panel
of the main unit,
Button operations on the control panel correspond to
the ones on the remote control as shown below,
m
MENU:
A/V/4/I_
Press to open or close the menu screen.
: Press to select a desired item on the screen or
ENTER:
adjust a selected item.
Press to go to the next step or complete
setting.
RETURN:
Press to return to the previous
the
8
8
8
8
8
8
0
MENU:
MENU
remote
on the
control.
INPUT:
ENTER on the
remote control.
CH/VV:
Cursor A/T
on the remote
control.
VOL+/-:
Cursor _/_
on the remote
control.
step.
Q-
23
On=Screen
• Some menu
Display
items
Menu
may not be displayed
depending
on the selected
Picture Settings
AV MODE (Changing Pic.Quality) ..... Page 25
OPC ................................................
Page 25
Backlight .........................................
Page 25
Contrast ..........................................
Page 25
Brightness .......................................
Page 25
Color ...............................................
Page 25
Tint ..................................................
Page 25
Sharpness .......................................
Page 25
Advanced ................................
Pages 25-26
Color Temp ...........................
Page 25
Motion Enhancement ............ Page 25
Active Contrast .....................
Page 25
DI Film Mode .........................
Page 25
Digital Noise Reduction ......... Page 26
,_
Audio Settings
_ Treble ..............................................
Bass ................................................
Balance ...........................................
Surround .........................................
Power Control
No Signal Off ...................................
Power Saving ..................................
_System
Options
View Option .....................................
Smart Central ........................
View Mode ............................
Freeze ...................................
Change Audio .......................
Change CC ............................
AQUOS LiNK Setup ..........................
AQUOS LINK Control .............
Auto Power On .......................
Selecting Recorder ................
Channel Select Key ................
Audio Return Channel .............
Input Terminal Setting ......................
Audio Setup ..........................
PC input ................................
Audio Select ...........................
HDMI Setup ...........................
Speaker .................................
Caption setup ...................................
Caption Style ........................
Caption Size .........................
Foreground Color ..................
Foreground Opacity ...............
Background Color .................
Background Opacity ..............
Window Color .......................
Window Opacity ...................
Q-
24
Page
Page
Page
Page
26
26
26
26
Page 26
Page 26
Page
Page
Page
Page
Page
Page
27
27
27
27
27
27
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
Page
44
44
44
44
44
44
27
27
27
28
28
28
28
28
28
28
28
28
28
28
28
input source.
_,_ initial Setup
EZ Setup ..........................................
Broadcasting Setup ...........................
CH Setup ...............................
Favorite CH ............................
Internet Setup ..................................
Network Setup .......................
Interactive Service ..................
AQUOS Remote Control .........
Language .........................................
Individual Setup ................................
Secret No ..............................
Parental CTRL ........................
Page
Page
Page
Page
Page
Page
Page
Page
28
29
29
29
52
52
52
53
Page
Page
Page
Page
29
29
30
30
information
Identification .....................................
Page 32
Software Update ......................
Pages 32-34
Netflix Help .......................................
Page 34
Vudu Help ........................................
Page 34
On=Screen
m
-
Display
-
Menu
o
• You can select AV MODE
Adjusts the picture to your preference
following picture settings,
Example
with the
remote control
settings.
Automatically
by pressing
AV MODE
unit. See page 21 for details
adjusts
the
brightness
on the
of AV MODE
of the
screen,
Off: The brightness
is fixed at the value set in "Backlight".
On: Automatically
adjusts.
• When set to "On", the Optical Picture Control (OPC)
senses the surrounding light and automatically adjusts
the backlight brightness. Make sure nothing obstructs
the OPC sensor, which could affect its ability to sense
surrounding light.
This lV provides various advanced
optimizing the picture quality
functions
for
For a better white balance, use color temperature correction.
Warm:
White with reddish tone
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "Picture Settings".
2 Press A/Y to select a specific adjustment item.
• Select "Advanced" and then press ENTER to set
"Color Temp.", "Motion Enhancement", "Active Contrast",
" DI Film Mode ", " Digkal Noise Reduction".
:3 Press A/Y(or
_/_)to
select the desired setting,
and then press ENTER
4 Press MENU to exit,
Standard:
Cool:
White with bkJish tone
User:
White balance can be adjusted manually through
R/G/B Gain between a maximum of 255 and a
minimum
the
of 0 for user color temperature.
• For resetting all adjustment items to the factory preset
#iiiiiiiiiiiiii!ij!i#iiii!ii_!iiEi_i
_i
_i
_i_i
_i
_i
_i_i
_i
_i_i
_i
_i
_i_i
_i
_i_¸ili
values, press A/_' to select "Reset", and then press
ENTER.
The screen
Backlight
The screen dims
brightens
Contrast
For less contrast
For more contrast
For less
Brightness
For more
Use Motion Enhancement to view fast-action video
brightness
brightness
more clearly.
Color
For less color
For more color
t20Hz Low/t20Hz Medium/120Bz Hight: For obtaining
intensky
intensity
a clearer image.
Tint
Skin tones
Skin tones
Off: Normal image
become reddish
become greenish
For less
Sharpness
For more
sharpness
sharpness
• "Motion Enhancement"
may cause image noise, if this
occurs, turn the function "Off".
For resetting all Picture adjustment items to the factory
• When AV MODE is set to "GAME" or "PC", or PC format is
preset values, press A/T to select "Reset", press ENTER,
being input, "Motion Enhancement"
is not available.
press A/_' to select "Yes", and then press ENTER.
The audio and video settings can be changed to suit
the program or input content being watched.
Select from the following AV modes,
II When the input source is TV,COMPONENT/AV
PC iN or HDMI 1 to 4:
STANDARD(ENERGY STAR#MOVIE/GAME/PC/USER/
DYNAMIC/DYNAMIC(Fixed)
Automatically
adjusts the image contrast according
the scene.
On: Automatically adjusts the image contrast.
Off: No adjustment.
to
Automatically detects a film-based source (originally
encoded at 25 frames/second), analyzes it then recreates
each still film frame for high.-definition picture quality.
Auto: Detects, analyzes, converts film source.
Off: Normal viewing mode.
(D-
25
On=Screen
Display
Menu
• "DI Film Mode" does not function depending on input signal
type.
The
surround
the
speakers,
On: Makes
sound.
"Auto" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.
"DI Film Mode" is not available during PC format input.
Produces
a clearer
video
function
produces
it possible
Off: Outputs
Surround
to enjoy natural,
the normal
effect
realistic
from
surround
sound.
For some discs, setup may be required on your DVD/BD
player, in this case, please refer to the operation manual of
your DVD/BD player.
image,
Auto; Automatically
adjusts the level of noise reduction.
Nigh/Medium/Low:
Select a desired level for viewing a
clearer video image.
n ®
.
_
0
Off: No adjustment.
Power control setting allows you to save energy,
Example
• "Digital Noise Reduction" is not available when you set
PC format is being input.
You can adjust the sound quality to your preference
with the following settings,
Example
USB
Smart I
Cel]tla_
1 Press MENU
press
4/_,.
to display the MENU screen, and then
to select "Power Control".
2 Press A/T
to select a specific adjustment
and then press ENTER.
3 Press A/Y to select the desired
item,
setting, and then
press ENTER,
4 Press MENU
to exit,
1 Press MENU to display the MENU screen, and then
press _1/1_ to select "Audio Settings".
2 Press A/Y to select a specific adjustment item,
• Select "Surround", and then press ENTER to set each
item.
3 Press A/Y to seWectthe desired sefting, and then
press ENTER.
4 Press MENU to exit.
This
function
power
down
Enable:
Disable:
allows
when
the
there
TV to automatically
is no signal
The power will automatically
no signal for 15 minutes.
This function does not work.
shut
the
received,
shut down
if there is
When it is 5 seconds before the power shuts down,the
screen will display"No signal. The power will be turned off."
Treble
Bass
For weaker treble
For weaker bass
Balance
Decrease audio
from the right
speaker
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
• For resetting Audio adjustment items to the factory preset
values, press A/T to select "Reset", press ENTER, press
A/_' to select "Yes", and then press ENTER.
This function allows you to set the Power Saving level
in order to decrease the power consumption and
increase the backlight lifespan,
On: Optimizes power reduction based upon video
content.
Off: This function does not work.
"Power Saving" does not function when you set AV MODE
to "DYNAMIC (Fixed)".
Q-
26
On=Screen
-
Display
t,
Menu
,
Allows you to capture and freeze a moving image that
you are watching,
Example
• You can select Freeze by pressing FREEZE on the remote
control unit. See page 20 for details of Freeze function.
Allows you to change the audio when multiple audio is
available for the program you are watching,
MTS
Select the MTS mode from Stereo, SAP or Mono,
(See page 19 for detaiWs of this function,)
Audio Language
Gives you the possibility to swap between main and
OPTION
SLEEP
AUDIO
alternative
channel,
FREEZE
language,
when it is available in digital
You can select MTS by pressing AUDIO on the remote
control unit.
Allows you to change the Closed Caption display,
Select "Change CC" on the menu to display the Closed
Caption information,
The information displayed varies depending on the program
you are watching.
Press MENU to display the MENU screen, and then
press _1/1_ to select "System Options",
2 Press A/Y
to select a specific adjustment item and
then press ENTER,
3 Press A/Y
(or 4/_)
to select the desired setting,
and then press ENTER,
4 Press MENU to exit,
These functions are useful for adjusting the audio
and video settings, The View Option functions can be
operated with the remote control unit,
The application window can be displayed
"Smart Central" on the MENU screen,
by selecting
- You can display the application window by pressing Smart
Central on the remote control unit. (See page 20.)
This function changes the screen size,
Select "View Option" on the menu to display the View
Mode menu screen,
The View Mode menu varies depending on the input source.
You can change Closed Caption by pressing CC on tl_e
remote control unit. See page 20 for details of Closed
Caption function.
You can output digital audio to an AV amplifier or
similar device whose DIGI]AL AUDIO INPUT terminal
is connected to the DIGI]AL AUDIO OUTPUT terminal
on the IM, Please select an audio output format
compatible with the audio formal of the program you
are watching and the equipment connected,
POM: The output terminal outputs audio signal in PCM
form. If your digital audio system does not
support Dolby Digkal, select "PCM".
Dolby Digital: The output terminal outputs audio signal
in Dolby Digkal form. It reproduces sound from
surround program of digital.
Off: Disables SPDIF output.
Auto Sync: For automatically adjusting the PC image.
• Be sure to connect the PC to the TV and switch
starting "Auto Sync.".
You can select View Mode by pressing VIEW MODE on
the remote control unit.
--See pages 21 and 22 for adjusting the video being input
from a TV, other audiovisual equipment, USB-Video,
DLNA-Video.
Fine Sync: Ordinarily
necessary to change
some
cases,
optimize
however,
it on before
you can easily adjust the picture as
image position using "Auto Sync.". In
manual
adjustment
is needed
to
the image.
Q-
27
On=Screen
H-Pos.:
Display
Centers
Menu
the image
by moving
it to the left or right.
V-Pos.:
Centers the image by moving it up or down.
Clock: Adjust when the image fi bkers wkh vertical
stripes.
Phase: Adjust when characters
when the image fi bkers.
have low contrast
This
function
screen
adjust
or
allows
you to adjust
appearance
to suit your
•
position
or the signal type,
setting
variable
ranges
The ranges
depend
on the View
Mode
can be seen on the position-
immediately
Note: This feature
mode.
• Caption
the
path
For HDMI
Auto:
of audio
output,
only:
Audio
path
HDMl(Digital):
connected
is set to HDMI
Select
or PC line in automatically
this when
Size: Selects
cable
and audio is
input via the same cable.
HDMl+Analog:
Select
this when
using
connected
Select
suing
is input
and the audio
this when
an analog
via a © 3,5
to choose
a caption
Select
display
"Small",
or "Large".
Color:
• Foreground
Opacity:
Choose
• Background
Color:
• Background
Opacity:
the caption
Select
Choose
display
text color.
the text opacity.
the backgrond
Choose
color.
one of the background
options.
• Window
Color:
• Window
Opacity:
Choose
one of the display
Choose
the backgrond
windows
color.
opacity.
and the
the TV and PC are connected
an analog RGB cable
Video+Audio:
audio
this when
this option
OSD.
in Digital TV (ATSC)
the TV and PC are
connected
using a DVI-HDMI conversion
cable
audio is input via a Q 3.5 mm stereo mini jack.
For PC only:
Video:
Select
can
result will be shown
of the submenu
to your own preference.
• Foreground
opacity
the TV and PC are
using an HDMI-certified
The setting
bottom
is only available
size according
screen,
below.
on the
"Standard",
Select
caption
You
• Caption
Style: Set to As Default or Custom mode. If
Custom mode is selected, user can modify the detail
The defauk cursor poskion may not be in the center, because
the screen poskion variable ranges may be asymmetrical.
The screen
closed
8 items:
styles described
•
the
prderence,
the
RGB
is not input.
TV and PC
cable
mm stereo
are
and the
mini jack.
• Audio Select only shows when the input source is HDMI
or PC IN.
HDMI Mode only shows and is available when HDMI
device is connecfed, Selecf from Auto, Graphic,
or
Video,
Auto: The HDMI input timing is set to Video mode or
Graphic mode automatically
Gaphic: HDMI input timing set to Graphic mode (PC),
The image is full scan
Video: HDMI input timing set to Video mode. The image
is over scan,
Enable"Quick Start Mode":When you power off the 'FV
( you can use remote control,keypad
or smart phone to
power off TV),you can find backlight will be turned off
quickly and LED lamp will be green,When you power on
the ]V( you can use remote control,keypad
or smart
phone to power on TV),you can find backlight will be
turned on quickly and LED lamp will be still green,
Disable"Quick Start Mode":When you power off the TV
( you can use remote control,keypad
or smart phone to
power off 'FV), you can find backlight will be turned off
slowly and LED lamp will be red, then ]V will go into
power saving mode,When you power on the TV( you can
use remote control,keypad
to power on TV),you can find
]V will be turned on slowly and LED lamp will be green,
Example
HDMI Mode is only workable for HDMI Video & Progressive
timing as followed: 1920x 1080p, 1280x720p, 720x480p,
720x576p.
Choose to turn on or off the TV internal speaker. The
audio output signals will not be turned off even though
the TV speaker is off. The default setting is On,
1 Press MENU to display the MENU screen, and then
press _/_ to selecf "initial Setup".
2 Press A/Y to selecf a specific adjustment
and then press ENTER,
Q-
28
item,
On=Screen
Display
• When you select
Menu
"individual
Setup",
you can enter the
Air/Cable:
4-digk secret number here. See page 30 for setting a
secret number.
3 Press A/V (or _/11_) to select the desired setting,
and then press ENTER.
4 Press MENU
Make
sure what
kind of connection
is made
wkh your TV when selecting "Air" or "Cable".
ON Search:
Channel auto search makes the TV look for
all channels viewable in the set area.
CH Memory:
You can select the channels to skip in each
ANALOG
(Air), ANALOG
(Cable), DIGITAL (Air) and
to exit,
DIGITAL
(Cable).
The indicator displayed in blue: Skips channels. (Channel
selection disabled using CH A/V.)
You can run EZ Setup
again, even after setling
up the
preset
channels.
Language:
Select from among 3 languages (English,
French and Spanish).
Location
& Time: Make settings for the country,area
time zone where you use the TV.
Select your country:
or "Mexico".
Select your
available
Select
either
"US",
and
"Canada"
time zone: Select your time zone. The
settings differ depending
on the selected
country.
• If no channel is found, confirm the type of connection
made with your TV and try channel search again.
This
function
channels,
"IV Location:
Select
"Home"
or "Store"
for the
location
where you plan to install the TV. This product qualifies
for ENERGY STAR in Home mode defauk setting.
Home: "Power Saving" is set to "Advanced", and AV MODE is
set to "STANDARD(ENERGY STAR)".
Store: "Power Saving" is set to "Oft" and AV MODE is set to
"DYNAMIC (Fixed)".
ENERGY STAR qualmcation is based on AV MODE
"STANDARD(ENERGY STAR)".
Air/Cable:
The indicator displayed in gray: Does not skip channels.
(Channel selection enabled using CH/X/V.)
Make sure what
wkh your TV when
ON Search:
Channel
kind of connection
favorite
allows
channels
is made
all channels viewable
in the set area.
If "Cable" is selected tot Antenna setting, scrambled
channels are removed atter the Channel search has been
easily.
favorite
on the
"initial
Setup
"/"Favorite
A/Tto
select
3. Press
press
To delete
_./Tto
favorite
your
favorite
Press
_,/Tto
start
clearing
remote
select
select
the
your
control
and
select
channels".
the
category
that
you
want
to
channel.
select
OK button
can
channel:
MENU
your
By setting
you
1. Press
2. Press
4 favorite
categories.
in advance,
favorite
channels
To register
your
store
selecting "Air" or "Cable".
auto search makes the TV look for
you to program
in 4 different
your
desired
channel
and
to confirm.
channel:
"All data
all favorite
clear"
channel
and
press
OK to
data.
completed.
Network:
When you connect to the Interact on the TV,
cenfi rm the connection
method and make adjustments.
• Wireless
LAN connection
is possible
only when
• While watching, you can toggle the selected channels by
pressing the A, B, C, and D button on the remote control.
the
WPS (push button) method is used. If any other
method is used, make settings by Inkial Setup >
Internet
Setup
> Network
Completed:
The settings
Confirm the information
Setup.
(See page 52.)
confirmation
screen is displayed.
displayed on the screen.
• See Initial Installation on page 17 for setting each item.
• If no channel is found, confirm the type of connection
made with your TV and try "EZ Setup" again.
If Initial Installation does not memorize all the channels
in your region, follow the instructions below to manually
memorize the channels,
You can also select a language from the Initial Setup
menu, Select from among 3 languages: English,
French and Spanish,
Before entering the Individual Setup sub-menu, user has
to key in the password first,After entering the Individual
Setup sub--menu, the user can modify the restricted table.
While exiting the sub--menu, below the Individual Setup
function is activated,
Enter a 4-digit password with the number buttons on the
remote control,
The default password
is 0000,
QD- 29
On=Screen
Display
Menu
ml MPAA (Voluntary
movie
rating
system}
Allows you to use a secret number to protect certain
settings from being accidentally changed,
New Secret
No, :
Enter a 4--digit Secret No, with the number buttons on
the remote control to change you secret No,.
Confirm
Secret No. :
Example
Enter you new 4-digit Secret No, again to confirm,
• As a precautionary measure, make a note of your secret
number and keep it in a familiar place.
Press A/Y to adjust the item to your desired position,
"_" indicates the item is blocked, Press MENU to exit.
G: General
audiences.
PG: Parental guidance
suRable for children.
PG-13: Parents
inappropriate
Used to enable or disable the parental control function.
This function will not be selectable from the menu if
you do not first configure your secret number,
Yes: Enables Parental CTRL.
No: Disables Parental CTRL
V-CHIP is an electronic filtering device built into your
TV. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows
parents to select programs judged suitable for child
viewing while blocking ones judged not suitable. It
does so automatically once you activate the V-CHIP
feature in your IM. "V-Chip" and "Status" will not be
selectable from the menu if you do not first configure
your secret number.
The U.S. has two rating systems for viewing content: TV
Parental Guidelines and movie ratings.
All ages admitted.
suggested.
Some material
may not be
strongly cautioned.
Some material
for children under 13.
may be
R: Restricted.
Under 17 requires accompanying
parent
adult guardian (age varies in some jurisdictions).
NC-17:
No one 17 and under
or
admRted.
X: X is an older rating that is unified wRh NC-17
encoded
in the data of older movies.
but may be
Voluntary movie rating system only uses an age-based
rating.
ill "iV Parental
Guidelines
Example
The TV Parental Guidelines work in conjunction with the
V-CHIP to help parents screen out inappropriate television
shows from their children.
Movie ratings are used for original movies rated by the
Motion Picture Association of America (MPAA) as watched
on cable TV and not edited for television. The V-CHIP can
also be set to block MPM-rated movies.
The setting automatically enters "Block" for any ratings
below your selection.
• If Status is not set to "Yes", the configuration settings will
not work.
8-
30
Press A/T to adjust the item to your desired position,
"it" indicates the item is blocked, Press MENU to exit,
Suggested age.
TV-Y: All children,
TV-Y7: Directed to older children,
TV-G: General audience,
TV-PG: Parental Guidance suggested,
TV-14: Parents strongly cautioned,
TV-MA: Mature audience only,
On=Screen
Display
Menu
Press A/V to adjust the item to your desired position.
"_" indicates the item is blocked. Press MENU to exit.
E: Exempt:
Example
Includes
news,
sports,
documentaries
and other
information
programming;
talk shows, music videos, and
variety programming.
0: Children: Intended for younger children under the age of 8
years. Pays careful attention
to themes that could threaten
their sense of securRy and well-being.
08+: Children over 8 years old: Contains no portrayal
When setting an individual content-based
rating item:
1 Press _ or ENTER to access blocked content
items from the currently selected age--based rating
item.
2 Press A/V to select an individual item, and then
press ENTER to unblock it ("6" is removed). Repeat
the same steps for the other items.
3 Press _1 or RETURN to register after all individual
content rating items are set.
Content
of violence as the preferred, acceptable,
or only way
to resolve conflict; nor encourage children to imRate
dangerous
acts which they may see on the screen.
G: General: Considered
acceptable
for all age groups.
Appropriate
viewing for the entire family, contains very little
violence, physical, verbal or emotionak
PG: Parental Guidance:
Intended for a general audience, but
may not be suitable for younger children (under the age of 8)
because R could contain controversial
themes or issues.
14+: Over 14 years: Could contain themes where violence
is one of tile dominant
elements of the storyline, but R
must be integral to the development
of plot or character.
Language
usage could be profane
wRhin the context of the theme.
FV: Fantasy violence.
V: Violence.
S: Sexual situation.
L: Adult language.
D: Sexually suggestive
18+:
Adults:
Intended
and nudity present
18 years and eider and
might contain depictions
of violence, which while related to
the development
of plot, character or themes, are intended
for adult viewing. Could contain graphic language and
dialog.
portrayals
of sex and nudRy.
[] Canadian
TV-Y
for viewers
[]
[]
[]
[]
French
Ratings
[]
x [] [] [] []
[]
: The
normally
[]
X
[]
X
[]
X
[]
X
TV-14
X
X
X
X
TV-MA
X
X
X
content
rallng
broadcast
X : Content
Canadian
and
TV-G
TV-PG
rating
Rating
Canadian
can be set,
by ]V
can
this
rating
is not
stations.
Press A/T
to adjust the item to your desired position.
"_" indicates the item is blocked. Press MENU to exit.
be set,
Systems
French
but
(Canadian
English
ratings
E: Exempt programming.
G: Generak All ages and children,
violence, but may be integrated
or unrealistic manner.
ratings)
* The TV rating systems
in Canada are based on the
Canadian
Radio-Television
and Telecommunications
Commission
programming.
(CRTC)
policy
on violence
in television
* While violence is the most important
content element to
be rated, the structure
developed
takes into consideration
other program content
mature themes.
* When setting
like language,
the V-CHIP
[]
Canadian
English
nudity,
on the Canadian
can choose either the Canadian
Canadian
French ratings.
Ratings
Example
English
sexuality
system
ratings
you
or the
and
contains minimal direct
into the plot in a humorous
8arts+: General but inadvisable for young children: May
be viewed by a wide public audience, but could contain
scenes disturbing to children under 8 who cannot
distinguish between
imaginary and real situations.
Recommended
for viewing wRh parent.
t 3arts+: Over 13 years: Could
violent scenes and therefore
parent.
contain scenes
recommended
t 6arts+:
Over 16 years:
and intense violence.
contain
18arts+:
frequent
Could
frequent
Over 18 years: Only for aduR viewing.
violent
scenes
and extreme
of frequent
for viewing wRh
violent
scenes
Could contain
violence.
Example
(E)-
31
On=Screen
[] How
Display
to temporarily
Menu
release
the V-CHIP
BLOCK
Central
SmaEt
When the V-CHIP BLOCK is working and censors a
broadcast, "V-CHiP HAS BEEN ACTIVA]ED."
displays.
1 Press ENTER while the V--CHIP is working, and
then the secret number setting menu displays.
2
Input the 4--digit secret number by using 0-9. At this
time V-CHiP BLOCK temporarily releases,
[] Reactivating
BLOCK
the temporarily
You can reactivate the temporarily
BLOCK as shown below.
released
V-CHIP
1
Press MENU to display MENU screen, and then
press 4/1_ to select "Information".
2
Press A/T
released V-CHIP
to select "Software
Update",
and then
press ENTER,
• Select "Status" setting from the Parental CTRL menu to
reactivate BLOCK. (See page 30.)
• Select "V-Chip" setting ("MPM", "TV Guidelines", "Can.
English Ratings" or "Can. French Ratings") from the
Parental CTRL to reactivate BLOCK. (See pages 30 to 32.)
Switch off the TV power.
• if you have already set the Secret No., go to step 3.
Example
Performing any of the three above will activate the V-CHIP
BLOCK.
Example
Central
Smad
1 Press MENU to display the MENU screen, and then
press 4/11_ to select "Information".
2 Press A/T to select a specific adjuslment
and then press ENTER.
item,
3 Press A/Y
(or _/1_) to select the desired setting,
and then press ENTER.
4 Press MENU
to exit,
The current version of the TV software
is displayed.
This is used to upgrade the system software to
enhance the TV functions.
3
Input the 4-digit secret number by using 0--9.
4
Press A/V to select "Manual Update" or "Auto
Update Setting", and then press ENTER.
The operations thereafter vary depending on the setting.
Select
the
method
for
manuaWly
updating
Network
Update:
Downloads
the update
network and then updates the software.
32
software.
file via the
(See page 33.)
• A broadband connection and Intemet Setup are required to
update the software using the network. (See pages 50 to
54.)
• It may take time to access and download the update
depending on the Intemet connection and other factors.
When the TV enter Standby, this function enables the
]V to connect to the network and check for updates
automatically.
Yes: Enables Auto Update Setting.
No: Disables Auto Update Setting.
Q-
the
USB Update:
Updates the software using a USB memory
device containing
the update file. (See page 33 to 34.)
On=Screen
Display
Menu
[] Updating the Software via the Network
1 Press A/V on the Manual Update screen to select
"Network Update", and then press ENTER,
• The TV connects to the network and checks for updates.
• To cancel, press ENTER.
• Do not unplug the AC cord while the software
being updated.
4 When the software is successfully updated, a
screen is displayed indicating that the update
process is completed.
• If tile software was net updated successfully,
check the
broadband
connection
and Intemet Setup, and then try
2 The current version of the TV and the latest version
of software are displayed, To update the TV
software, select "Yes", and then press ENTER.
updating
5
• When a server connection
cannot
be established
is
the software
again.
Press ENTER, the TV automatically
turns on again.
turns off and then
or an
update is not available, a message is displayed.
If a server connection
cannot be established,
check the
broadband
connection
and Internet
Setup.
[] Updating the Software with a USB Memory Device
To check for the availability of a software update, visit
http://www.sharpusa.com/products/support/.
If you
have any quesllons, please
call 1--800--BE-SHARP
® Do not
remove
the
(800--237-4277).
USB
memory
device
or unplug
the AC cord while the software
is being updated,
® Be sure to properly
follow
the whole procedure
described
below,
step by step, Otherwise,
for
example,
the TV cannot
read the data in the USB
memory
device
and software
updating
will fail
1 Insert the USB memory device with the update file
into the USB terminal on the TV.
3 After the update file is downloaded,
update process begins.
!
the software
J
2 Press A/Y
on the Manual Update screen to select
"USB Update", and then press ENTER.
(_)-
33
On=Screen
3
Display
Menu
Press ENTER to start checking
memory device.
the data in the USB
• Do not remove the USB memory device or unplug
the AC cord while the software is being updated,
6 When the software is successfully updated, a
screen is displayed indicating that the update
process is compWeted,
Example
4
During the data checking,
"Checking"
blinks.
- If the update has failed, check the file in the USB
memory device and try Software Update again.
- The current version of the TV software and the version
of the update file on the USB memory device are
displayed.
Example
- If the USB memory device is not properly installed or
the correct update file cannot be found on the USB
memory device, an error message is displayed.
Check the file on the USB memory device, and then
reinsert the USB memory device correctly.
7 Please remove the USB memory device. Press
ENTER, the TV automatically turns off and then
turns on again,
1 Press MENU
5 To update the TV software with the update file,
select "Yes", and then press ENTER,
to display the menu screen,
2
Press 4/11_ to select "information",
ENTER,
3
Press A/T
ENTER,
4
Press 4/11_ to select "OK/Deactivate",
pressENTER.
and then press
to select "Nelflix Help", and then press
and then
• To confirm the Netfiix status, check the information
displayed on the screen and click "OK".
!!
Example
Q-
34
1
Press MENU
2
Press 4/1_
ENTER.
to select "Information",
to display the menu screen,
3
Press A/T
ENTER.
to select "VUDU Help", and then press
4
Press 4/11_ to select "Yes/No",
ENTER.
and then press
and then press
Enjoying Photo/Music/Video
Playback
You can connect the lV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy
viewing pictures, listening to music, and watching videos.
•
Depending
on the USB memory
recorded data.
•
It may take time to read the recorded data if the USB memory
many files or folders.
Use only alphanumeric
characters
for naming files.
•
Insert
the
USB
memory
device
device/USB
with
hard drive/home
recorded
photos,
network
(DLNA) server,
device/USB
music
or videos
the TV may not be able to recognize
hard drive/home
into the
USB
network
terminal
•
Do not remove a USB memory device or memory card from the TV while using
switching screens, or before you exit "USB" from the INPUT list.
•
•
Do not insert and remove a USB memory device/USB
hard drive to and from the TV repeatedly.
When using a card reader, be sure to insert Memory first before using the card reader.
• Do not use a USB extension
® Using a USB extension
cable
Connect
Home
•
•
the
'rv to the
network
home
(DLNA) server
cable
with
network
when connecting
the USB memory
(DLNA)
server
(DLNA)
the slide show
an EiFHERNETT
contains
on the lV,
function,
a USB memory
device to the USB terminal
device may prevent
the 33/from
performing
using
server
the
or
on the TV.
correcUy.
cable,
Router
Do not disconnect
a home network (DLNA) server from the TV while transferring
files, when
before you exit "Home Network (DLNA)" from the INPUT list.
Do not connect and disconnect
a home network (DLNA) server from the TV repeatedly.
a screen is swkching
to another
or
_-
35
Enjoying Photo/Music/Video
Playback
POWER
DISPLAY
<souac_/
r_
STB
DVD*VCR
czl
r-n _AUDIO
Example
SmaEt
Central
USB
c_ c'_ c_ "RE°
c_
OPTION
_
SLEEP
AUDIO
FREEZE
EZ3 CZ3 _
Buttons
•
To play back
data on a USB memory
•
USB memory device on the TV If the input source is USB,
go to step 2.
Use the following
procedure to switch back to USB mode
after swkching
from USB mode
"USB" or "Home
list screen,
device,
to another
1
Select
INPUT
Network
2
Press
_1/_ to select
"Photo",
and then press ENTER,
A/Villi
ENTER
mode.
(DLNA)"
"Music"
for
thumbnails
operations
insert the
from
_
Select
a desired
item.
iWhen selecting a folder icon: Enter this directory.
iWhen selecting a photo thumbnail: Slide show.
RETURN/EXIT
Menu
iReturn to the previous
Sub Menu
Press MENU
to display the sub-menu.
process.
or "Video",
Example
files by the following
You can browse
the
options.
• Sort
• Media Type
• Thumbnail
size
- You can see the file name, shooting date, file size and pixel
size of the selected photo in the topdeft comer of the screen
(shooting date is only available in the EXIF file format).
Press _1/1_ to select the desired
press ENTER,
•
The key guide display
set time. To display
DISPLAY.
disappears
the key guide
folder, and then
automatically
display
again,
after a
press
m When displaying the data with the Smart Central
The Media screen can be displayed even by using the
application window,
Q-
1
Press Smart
window,
2
Press A/V/_/I_
to select "USB Media" or "Home
Network (DLNA)", and then press ENTER,
• If "_"
is displayed after you switch to USB mode,
check the USB connection.
• If "l_¢J'or "_"
is displayed after you switch to Home
Network (DLNA) mode, check your TV's network settings
and connection.
• You can also display the Media screen by pressing
FAV APP on the remote control unk.
36
Centralto
display the smart central
Enjoying Photo/Music/Video
Playback
Press MENU
The
photo
selected
onthethumbnail
selection
screen
by
pressing
ENTER Example
following
to display
tile sub-menu.
You carl select tile
options to display the photos
• Play
• Repeat
• Shuffle
• Rotate
• Zoom
• Show
Info
• The key guide display disappears automatically after a set
time. To display the key guide display again, press DISPLAY.
• Rotating photos only applies to the temporarily selected item and
this setting is not saved.
Buttons
for
slide
RETURN/EXIT
show
operation
Example
Return to the thumbnail
A(red)
selection
B(green)
None/Repeat
One/Repeat
Select slide show interval.
C(blue)
Select
D(yeHow)
Play the photo
slide show
Menu
following
order.
photo.
Viewing individual photo.
Display the information.
Sub Menu.
DISPLAY
Press MENU
All.
effect.
in random
Go to the previous/next
I|
screen.
to display the sub-menu.
options
Buttons
You can select the
for
music
A/Yi_I/1_
to display the photos
Select
ENTER
• Pause
a desired
kern.
When selecting a folder icon: Enter this directory.
When selecting a music file: Play music.
• Repeat
• Shuffle
• Duration
RETURN/EXIT
Menu
• Effect
Press
• Show Info
by the following
• Sort
•
mode
Return to the previous
Sub Menu.
MENU
to display
the sub-menu.
process.
You can browse
the files
options.
Media Type
• The key guide display disappears automatically after a set time." Thumbnail
To display the key guide display again, press DISPLAY.
size
Example
The photo in slide show by pressing.
Example
Buttons
for
playing
RETURN/EXIT
Buttons
for viewing
;++++:8+_++
++++
++;+;+
RETURN/EXIT
Individual
+
Photos
operation
;
+
Return to the thumbnail
None/Repeat
B(green)
Rotate
C(blue)
Zoom
D(yellow)
Play the photo in random order.
Go to the previous/next
photo.
Slider show.
DISPLAY
Display the information.
Sub Menu.
Menu
One/Repeat
selection
A(red)
the photo
;
screen.
All.
by 90 degrees
photo.
to the right
music
Return to the thumbnail
selection
A(red}
None/Repeat
One/Repeat
B(green}
Play the music in random
D(yellow}
Display the information.
_'q / _
<<1 / _
Go to the previous/next
Backward/Forward.
1_/ ii / []
Play/Pause/Stop.
DISPLAY
Menu
Display the information.
Sub Menu.
Press
MENU
to display the sub-menu.
following options
• Pause
screen.
All.
order.
photo.
You can select the
to play the music.
•
•
•
•
Repeat
Shuffle On/Shuffle
Off
Show Info
Hide Spectrum/Show
Spectrum
•
Lyric Options
(_b- 37
Enjoying Photo/Music/Video
Playback
Example
USB device
USB Memory,
Storage
File system
Photo file
format
for
AiYi4i
Video
i_
ENTER
RETURN/EXIT
Menu
Press MENU
by the following
• Sort
(Mass
USB hard drive
FAT/FAT32
JPEG(.jpg
.jpeg) Progressive
BMP(.bmp)
PNG(.png)
Music file
format
Buttons
USB card reader
class),
JPEG
MP3 (.mp3)
mode
Select
a desired
XviD
kern.
iWhen selecting a folder icon: Enter this directory.
.avi
AVI
.mkv
MKV
H.264
MPEG4
Motion Jpeg
MPEG2 MPEG1
When selecting a photo thumbnail: Slide show.
iRetum to the previous process.
Sub Menu
to display
the sub-menu.
You can browse
the files
options.
MP3
AC3
LPCM
ADPCM
XviD
H.264
MP3
AC3
MPEG4
MPEG2
LPCM
ADPCM
XviD
H.264
AC3
LPCM
ADPCM
MP3
• Media Type
• Thumbnail
size
.asf
ASF
Example
.mp4
.mov
MP4
XviD
H.264
MP3
AAC-LC
(SMP4)
MPEG4
/HEAAC
MP4
(SMP4)
XviD
H.264
MPEG4
Motion Jpeg
MP3
AAC-LC
/HEAAC
AC3
.mpg
.mpeg
PS
MPEG2
MPEG1
_!i_l_i_ll!li_iil!l!_!!!_!_!_!_!_!_!_l_lli_!i_ii!_i_iiiiil_l_l_!_!_iiiil_iilillililililililiiiiii_i_i_:l!J_D_
¸i_i_i_!il¸I_!_!_!_!_!ii!iiiiiiiiii!
ii_iii!iiiiiii!i!_iii!!!!!!iiiiiE_iiii!!ii_iii_iiii_i_i
RETURN/EXIT
A(red)
D(yellow}
Return to the thumbnail
None/Repeat
selection
One/Repeat
Repeat AB.Select
the
screen.
All.
part you want
to play
repeatedly.
Go to the previous/next
Backward/Forward.
photo.
Play/Pause/Stop.
DISPLAY
Menu
Press MENU
Display the information.
Sub Menu.
to display
options to play the video.
• Pause
•
•
•
•
O-
Repeat
Show Info
AV Mode
View Mode
38
the sub-menu.
LPCM
MPEG
You can following
•
USB 1.1 devices
•
•
Operation using USB hubs is not guaranteed.
Some video file formats may not be played depending
the file.
may not be played
properly.
•
Some images may not be displayed in the appropriate
aspect ratio depending
on the file format.
on
Enjoying Photo/Music/Video
Playback
Press MENU
following
•
to display the sub-menu.
options
You carl select tile
to dispBy the photos
Play
• Repeat
• Shuffle
• Rotate
• Zoom
e Show Info
•
Rotating photos only applies to the temporarily
item and this setting is not saved.
The
photos
screen
displayed
Buttons
for
slide
IRETURN/EXlT
Example
,A.iYi4/i_
ENTER
a desired
kem.
When selecting a folder icon: Enter this directory.
When sebcting a photo thumbnail: Slide show.
RETURN/EXIT
Menu
Press MENU
Return to the previous
Sub Menu
to display the sub-menu.
flies by the following
to the thumbnail
selection
One/Repeat
Select
slide show
interval.
C(blue}
Select
slide show
effect.
D(yelJow}
Play the photo
in random
Go to the previous/next
screen.
All.
order.
photo.
Viewing individual photo.
Display the information.
Sub Menu.
to display the sub-menu.
options
to display
You can select the
the photos
Pause
• Repeat
• Shuffle
operations
Select
operation
B(green}
following
thumbnail
selection
show.
None/Repeat
Press MENU
for
show
Retum
H
DISPLAY
Menu
Buttons
thumbnail
as a slide
A(red}
/ _
•
on the
are displayed
selected
process.
•
•
You can browse
the
•
Duration
•
Effect
•
Show Info
The slide show continues
until you press
For setting the slide show speed, display
Network
(DLNA) Menu screen.
RETURN.
the Home
options.
• Media Type
• Thumbnail size
Example
•
You can see the file name, shooting date, file size and pixel
size of the selected photo in the Iowerdeft corner of the
screen (shooting date is only available in the EXIF fib forma
The photo selected
is displayed,
Buttons
on the thumbnail
for individual
selection screen
Buttons
display operation
for
music
mode
_iii_ii!i_i_i:!;
¸i!_@i_i@!!_!i!!ii!i!!iiiiiiiiiii@!!@i!!_!!i!ii{_!_i_ii_i_i@i!i_i!i_iii_!!!
¸ii:_i_i!_iiiii_ii_iizii(i
¸i!i!i!ii!iiiiiiii@!i_iii!ii!!i
¸i_!ii
¸@!i!i!i!ii!i_i!i!i!i!!_!!i!!i!!;_!:!_i_:;_
RETURN/EXIT
A(red}
Return to the thumbnail
None/Repeat
One/Repeat
Rotate
C(blue}
Zoom
D(yellow}
Play the photo in random order.
Go to the previous/next
photo.
Slider
DISPLAY
Menu
by 90 degrees
photo.
show.
Display the information.
Sub Menu.
screen.
All.
B(green}
_/_,_
the photo
sebction
AiYi_i
i_
Select
ENTER
to the right.
RETURN/EXIT
Menu
Press
MENU
a desired
kem.
When selecting a folder icon: Enter this directory.
When sebcting a music fib: Play music.
Return to the previous
Sub Menu.
to display
files by the following
the sub-menu.
process.
You can browse
the
options.
Media Type
Thumbnail
size
@-
39
Enjoying Photo/Music/Video
Playback
Example
Buttons
for
playing
RETURN/EXIT
Example
music
Return to the thumbnail
A(red)
None/Repeat
B(green)
Play the music
D(yellow)
Display
in random
_/H/m
DISPLAY
Play/Pause/Stop.
Display the information.
Menu
Sub Menu.
Press MENU
•
•
•
•
to display
options
screen.
Buttons
All.
the sub-menu.
You can select the
to play the music.
Video
_
the actual
the part you want to play
_'_ / _
/ _
Go to the previous/next
Backward/Forward.
_./ii
/ []
DISPLAY
Play/Pause/Stop.
Display the information.
•
MENU
Sub
photo.
Menu.
to display the sub-menu.
You can ollow the
mode
Select
a desired
kern.
iRetum to the previous
Sub Menu
to display
• Media Type
• Thumbnail
size
the sub-menu.
options.
Last Memory
Music
I Photo
Video
iWhen selecting a folder icon: Enter this directory.
iWhen selecting a photo thumbnail: Slide show.
files by the following
40
AB.Select
Repeat
Show Info
AV Mode
• View Mode
RETURN/EXIT
Menu
8-
Repeat
screen.
All.
•
•
ENTER
MENU
D(yellow}
selection
One/Repeat
options to play the videos.
• Pause
•
•
Press
None/Repeat
Menu
Example
A/Yi4i
Return to the thumbnail
A(red}
Press
The displayed
play time may differ slightly from
play time depending
on the flies.
for
Video
repeatedly.
Repeat
Shuffle On/Shuffle Off
Show Info
Hide Spectrum/Show
Spectrum
Buttons
playing
RETURN/EXIT
photo.
• Lyric Options
•
for
order.
the information.
Go to the previous/next
Backward/Forward.
following
• Pause
selection
One/Repeat
process.
You can browse
the
file format
file format
file format
MP3
1 JPEG
MPEG, ASF, MP4,
MOV, AVI
Progressive
format jpeg files are not supported.
Some video file formats may not be played depending
the file or the server.
on
Other Viewing Options
You can operate the connected AV products (AV
receiver, cable box, SAT tuner, DTV, VCR, DVD, BD,
LD) using the presetting manufacturer function of your
remote control unit.
1
1-1
To operate the connected equipment, press STB,
DVD,VCR
or AUDIO to select your device, (STB
(cabldsatdlite
set-top box), DVD, BD, VCR or AUDIO,)
The remote control unit button will function as follows,
• When you operate VCR, DVD or BD, press INPUT to select
the terminal connected to your device.
• CABLE and SAT cannot be selected at the same time.
1 POWER
(SOURCE)
• Turns the connected
=___
-.=._
3
equipment
power
on and off.
_
Starts playback.
(VCR, DVD, BD)
s 44
5_
opT,o,
sLEEP
_oo,0
F_Z_
[ZI] CZ3 C]
_
10
Rewinds the tape and allows picture search.
Hold down to go in reverse. (DVD, BD)
[Z]
(VCR)
4m
Stops the tape transport.
(VCR)
• Playback stops when pressed. Wkh some DVD/Biu-ray
disc players, pressing the button twice may open the disc
tray. (DVD, BD)
6_
5 11414
• Pressing quickly once takes you to the start of the chapter
currently playing. Each time you press it, you move back
to the start of the previous chapter. (DVD, BD)
6 0-9,
• (DOT)
(STB)
• Press a button (or buttons) that corresponds
channel that you wish to watch.
to the
7_
12
13
• Rapidly advances
the tape
(VCR)
• Hold down to fast forward.
and allows
picture search.
(DVD, BD)
s||
• Sets pauses
and still pictures.
(VCR, DVD,
BD)
9_
14
• Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the
start of the next chapter.
(DVD, BD)
10
OREC
Starts recording.
Presetting
manufacturer
11
1
2
(VCR)
codes
Press an appropriate button (STB, DVD,VCR
AUDIO) to operate the connected equipment,
or
Press an appropriate button (STB, DVD.VCR or
AUDIO) and DISPLAY at the same time to enter
the code registration mode,
Press 0-9 to enter the manufacturer
code,
(See
page 42,)
• Preset mode is finished once the LED no longer lights
between
the current
channel
and the
channel you were watching immediately
before. Some
manufacturers
do not preset FLASHBACK.
(STB)
12
CHA/V
• Press CHA or CHV
to tune in to a higher or lower
channel. (STB)
• Press to select the channel of the TV tuner on the VCR.
(VCR)
13
MENU
• When this button is pressed,
display. (DVD, BD)
up.
After registering the code, the LED will stop blinking
then turn off after one second. (if you perform an
incorrect operation, the LED will blink quickly then
turn off.)
FLASHBACK
• Press to switch
14
the DVD/BD
menu will
A/T/_/_,
ENTER
• A/Y/4/1_:
Press the button to select kems on the STB
GUIDE screen or STB MENU screen. (STB)
Press the button to select kems on the DVD/BD menu
screen. (DVD, BD)
• ENTER: Press to activate
DVD, BD)
the selected
function.
(STB,
(D-
41
Other Viewing
Manufacturer
Options
codes
VCB BRAND
AUDIO DYNAMICS
BROCKSONIC
CANON
CRAIG
CURTIS MATHIS
DBX
EMERSON
GE
INSTANT REOLYA
JC PENNEY
JVC
KENWOOD
MAGNAVOX
MAGNIN
MEMOREX
MONTGOMERY
WARD
NEC
PANASONIC
PENTAX
PHILCO
PHILIPS
QUASAR
REALISTIC
SAMSUNG
SHARP
SONY
SYLVANIA
TATUNG
TEAC
TMK
YAMAHA
DVD/BD/LD
DENON
JVC
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
PANASONIC
PHILIPS
PIONEER
PROSCAN
RCA
SAMSUNG
SHARP
SONY
TOSHIBA
YAMAHA
ZENITH
BRAND
REMOTE CONTROL CODE
NUMBER
O9
13
O4
12
O4
O9
10, 13, 14
O4
O4
O4
09, 16, 17, 22
09
04, 05, 06
12
O4
O2
O9
04, 18, 19, 20, 21
05
04,05
04,05,06
04
01,02
11,12
01,02,03
07,08,15
04,05,06
09
09
10
09
REMOTE
CONTROL
NUMBER
42
REMOTE
BRAND
CONTROL
CODE
NUMBER
ANVISION
CABLE STAR
DIRECT TV
DISH NETWORK
04,05
04,05
41
39,40
EAGLE
G.INSTRUMENT
GERROLD
JERROLD
05
02,03,10,11,17,20
17
02,03,10,11,12,20,
25-34
04,05,08,12,15,16,
18,19,22,23
38
07
14,21
04,05,08,13,15,16,
18,19,22,23
07
04,05
14,36",37"
01,09,24
04,05,08,13,15,16,
18,19,22,23
06,35
MAGNAVOX
MOTOROLA
OKA SIGMA
PANASONIC
PHILIPS
PIONEER
RANDTEK
RCA
S.ATLANTA
VIEWSTAR
ZENITH
- Numbers marked with * are SAT codes, all others are STB
codes.
AUDIO BRAND
CODE
24
31
36
26
26
28
24, 37
26, 38
30,33,35
25
25,39
29,34
23,32,41,42
27,40
26
24
26
- Depending on the brand, the codes of some BD players
may not be supported.
Q-
STB
SHARP
SHARP
(SOUND
BAR)
REMOTE CONTROL CODE
NUMBER
01
02
Using AQUOS LiNK
What's AQUOS LINK?
Using the HDMt CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate
compatible system equipment (Blu-ray disc equipment, AV amplifier, DVD).
By connecting AQUOS UNK compatible devices with HDMI--certified cables to the 'FV, you can control a
recorder or AV amplifier using the remote control of the 'FV.
AQUOS LINK allows you to operate the HDMt--connected equipment with one remote control.
ius........
uTt
HDMFcertifiedcable *
ARC-compatibleequipment.
Opticalfiber cable
4
i
AQUOS
4
,
HDMI-certifiedcablef
4
AQUOS LINK-compatible
Audio system
BD Player
Back panel
horizontal inputs
Back panel
horizontal
inputs
• For connecting
the TV to AQUOS LINK-compatible
equipment,
use commercially
available cables.
• Point the remote control toward tile TV, not to connected
HDMI equipment.
• Video noise may occur depending
on the type of HDMI cable used. Make sure to use an HDMFcertified
• Up to 3 pieces of HDMI recording
equipment
and one AV amplifier can be connected
using this system.
• These operations
affect the HDMI equipment
seJected as tile current
the equipment
and select the appropriate
input source using INPUT.
• The AQUOS
These
LiNK feature
devices
may cause
may not operate
interruptions
DISPLAY (SOURCe}
D_
D
properly
to the image
DVD,VCR
SLEEP
AUDIO
If the equipment
or AV selector
does
not operate,
turn on
unit is used.
sound.
Connected AQUOS LINK-compatible
devices can be operated
changing the settings of the remote control unit.
without
button will function
only when AQUOS
LINK is used.
AUDIO
[] One Touch
OPTION
an HDMI splitter
and/or
source.
POWER
OPTION
STB
when
input
cable.
FREEZE
Play
While the FV is in standby mode,
image from the HDMI source.
it automatically
turns on and plays back the
[] One Touch Recording
Press ®REC while you are viewing a broadcast received with the AQUOS
LINK-compatible
recorder, The AQUOS LiNK automatically recognizes the
connected HDMI device and starts recording.
[] Single remote
control
The AQUOS LiNK automatically recognizes the connected HDMI device and
you can control the FV and the devices as if using a universal remote control.
[] Control
the AQUOS
Set the volume of AQUOS
UNK-compatible
LINK-compatible
audio
system
audio system,
@-
43
Using AQUOS LiNK
This
Example
function
can be set for each input terminal.
On: The remote control unk of the TV can be used to
select the channel, display program information,
and
perform other operations
of a connected
AQUOS
LINK-compatible
recorder,
Off: This function does not work.
This
function
audio
which
allows
Requirements
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "System Options".
2
Press A/V
to select "AQUOS
then press ENTER.
LINK Setup",
and
3
Press A/Y
ENTER,
4
Press A/T
(or 4/1_ ) to select the desired setting,
and then press ENTER.
5
Press MENU
you to listen
equipment
without
using
conventionally
is required,
for
using
an
audio
Coaxial
ARC-compatible
compatible
Off: This function
to select a specific item, and then press
via
cable,
AV
•
audio equipment.
does not work.
If the TV audio cannot be output from the AV amplifier even
after making the necessary settings, connect the TV to the
AV amplifier wkh an Digkal Coaxial cable and select "Off".
to exit.
POWER
DISPLAY
CSOURCE)
C23_POWER
]
STB
DVD.VCR
AUDIO
C3
C3 C3
r_
On: You can operateAQUOS LiNK-compatible
equipment.
Off: AQUOS LiNK function does not work.
the
One
C3
OPTION
iiiiiiii_!!i!_i_i_!_:_;_S_
SLEEP
AUDIO
FREEZE
C_ CC} C_ I::C3
_ii_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_i_!i_!i_ii!ii!ii_ii_ii_ii!ii!iii!i!i_i!!_!_i!ii!ii!ii!_i!_i!_i!
¸ii!i!!i!!i!_ii!ii_ii_ii_ii_!i!ii!ii!ii!ii!i!iii_iiiiiiii!ii!i_i_!_!i!_!_!i!iii_i_ii_i_i_i_ii_ii
Touch
Yes: While the TV is in standby
Play function
is
AQUOS
LINK
connected
mode,
k automatically
turns on and plays back the image from
source.
No: This function does not work.
the HDMI
When multiple AQUOS LINK-compatible
devices are
connected, this function allows you to set the recorder
for recording when you press OREC on the TV's
remote confrol unit.
Press
to select the recorder
• When an AQUOS LINK-compatible
equipment
is connected
between
"Sub" is displayed.
for recording.
audio system or other
the TV and recorder,
allows
you
equipment
I_ to start
playing
• The last played program
following
buttons during
POWER
(SOURCE}
_1_
_.
_
Press A/Y
lV
amplifier:
• ARC-compatible
AV amplifier connected
to the ARCcompatible
HDMI terminal (HDMI 1).
(Refer to the operation
manual of the ARC-compatible
equipment
for details.)
• Use of an ARC-compatible
cable.
Auto: You can listen to the TV audio with ARC-
Select AQUOS LINK Control to disable AQUOS LINK
function even when an AQUOS LINK-compatible
HDMI
device is connected to the ]V. This function prevents
the device from starting to operate unexpectedly,
If this is activated,
enabled,
to the
an Digital
to operate
with
one
back
the
remote
HDMI
control,
a title,
is played
broadcast
back. You can use the
viewing.
Turns the power ol the HDMI connected devices
on and off.
Hold down to go in reverse.
Starts playback,
Hold down to tast forward,
[]
Playback stops.
| |
Sets pauses and still pictures.
Pressing quickly once takes you to the start of the
chapter currently playing, Each time you press it,
you move back to the start ot the previous chapter.
Pressing quickly once takes you to the start of the
next chapter. Each time you press it, you move
ahead to the start of the next chapter.
• The buttons l'_/_'_
do not function
Blu-ray disc players currently available.
- BD-HP2OU,
BD-HPSOU
@j)- 44
wkh
the following
Using AQUOS LiNK
0
Q=
_
II
=
DISPLAY <SOL_CE}
[]
POWER
{:::3 {:::D
STB DVD'VCRAUDIO
1:::3
1::3 I:_
D
OPTION
D
This
SLEEP
AUDIO
E::) I::_
function
program
simply
EZ3
allows
being
compatible
FREEZE
easy
viewed
equipment
pressing
one--touch
on the
with
®REO
recording
FV to AQUOS
a recording
on the
remote
of the
LINK--
function
by
control.
Prepare the connected
AQUOS
LINK-compatible
recorder
for recording.
Check
the following
items.
• Make sure that the antenna cable is connected.
• Check that there is sufficient available
recording media (HDD, DVD, etc.).
• On the TV, use "AQUOS LINK Setup"
Recorder"
to select the equipment
for
• By default, the recorder connected
to
for recording.
1
Press
®REC
to start
space
on the
and "Selecting
recording.
HDMI 1 is selected
recording,
• When you are viewing a broadcast
received wkh the
AQUOS LINK-compatible
recorder selected in "Selecting
Recorder",
recording to the AQUOS recorder of the
broadcast
being viewed starts.
• When you are viewing a broadcast
received wkh
equipment
other than the AQUOS LiNK-compatible
recorder selected in "Selecting
Recorder"
or other
external input equipment,
pressing OREC on the remote
control does not start recording.
2
Use
the
(1}
Press
Menu
(2}
Press
then
Link Operation
OPTION
screen,
A/V
press
Menu
to display
to select
"Stop
to stop
the
Link
OPTION
SLEEP
AUDIO
FREEZE
mDD
recording,
Operation
Recording",
DDB
and
ENTER,
You can also use the Link OpereJion Menu for
recording on the connected AQUOS LINK-compatibb
equipment,
1 Press OPTION to display the Link Operation Menu
screen,
2
Sebct "Start Recording",
start recording,
and then press ENTER to
• You can also start recording by pressing ®nEe on the
remote control unit.
3
Sebct "Stop Recording",
stop recording,
and then press ENTER to
You can manually turn on/off the power of connected
AQUOS LiNK--compatible equipment,
1 Press OPTION
screen,
to display the Link Operation
Menu
2
Press A/V to select "Recorder
then press ENTER,
Power On/Off",
and
3
Select "On" (or "Off") and press ENTER to turn on
(or off) the equipment,
(_)-
45
Using AQUOS LiNK
2
This section explains how to play back a title in the
AQUOS LINK--compatible equipment.
1
Power on the AQUOS
and select appropriate
2
Press OPTION
screen.
3
Press A/Y to select "Play from Rec. List", and
then press ENTER.
* The title list data from the connected AQUOS LINK-compatible equipment displays.
4
LINK-compatible
external input.
equipment,
to display the Link Operation
Select the title with A/Y/4/_-,
to start playback.
* This function works only when
equipment
is connected.
. The recorder's EPG is displayed.
3
Press OPTION
screen.
LINK-compatible
to display the Link Operation
2
Press A/T to select
press ENTER.
*
1 Press OPTION
screen.
currently
manual
LiNK-compatible
of the recorder
for details.
to display the Link Operation
2
Press A/Y to select "Change Audio Output
Device", and then press ENTER,
3
Press A/Y 1o select "By AQUOS
then press ENTER.
audio SP,
Menu
and
* The sound from the TV speaker is muted and only the
sound from the AQUOS LINK-compatible audio system
is audible.
* You can useVOL+/and MUTE.
Menu
Select "By AQUOS SP", and then press ENTER to
listen to the TM sound.
LiNK-compatible
* Depending
on the status of the equipment
(recording or in
standby mode, etc), the setup menu will not be displayed.
* The setup menu will not be displayed wkh the player
BD-HP20U
Refer to the operation
an AQUOS
You can select to listen to the TV sound only from the
AQUOS LiNK-compatible
audio system and manually
change its sound mode.
"Show Start Menu", and then
The setup menu of the AQUOS
equipment is displayed.
Select the program to record.
* You can use A/T/41/I_,
ENTER, RETURN, EXIT and
the colored buttons.
* This function works only when
recorder is connected.
You can call up a setup menu from the connected
AQUOS LINK-compatible
equipment.
1
(Rec. Book)",
Menu
and then press I_
AQUOS
Press A/Y to select "Link Booking
and then press ENTER.
available.
If multiple HDMt devices are connected in a daisy
chain, you can specify which device to control here.
1 Press OPTION
screen.
2
Press j,/Y
to display the Link Operation
Menu
to select "HDMI Device Selection",
and then press ENTER. The HDMI device toggles
each time you press ENTER.
You can switch the media (HDD or DVD) for playback
or recording on the AQUOS LiNK-compatible
recorder.
1
Press OPTION
screen.
to display the Link Operation
Menu
2
Press A/Y to select "Change
and then press ENTER.
3
Select the desired media such as HDD or DVD.
Media of Device",
* The Media type toggles each time you press ENTER in
"Change Media of Device".
° Select the media to be operated by the player.
You can call up the AQUOS LINK-compatible
recorder's EPG and preset timer recordings using the
rv's remote control.
1
Press OPTION
screen.
to display the Link Operation
Menu
1 Press OPTION
screen.
2
to display the Link Operation
Menu
Press A/V to select "AQUOS LINK Setup", and
then press ENTER.
* The AQUOS LINK Setup menu screen is displayed.
Using a PC
You can select the screen size.
1 Press VIEW
2
MODE,
• The View Mode menu displays.
• The menu lists the View Mode options selectable for the type of video signal currently
being received.
Press VIEW MODE or A/Y while the View Mode menu is displayed to select a
desired item on the menu.
• You can sequentially
• Connect
select a View
the PC before making
Mode that has ks own aspect
adjustments.
(See page 16.)
• Selectable
screen size may vary with input signal type.
• You can have the same settings by choosing
"View Mode"
Example:
Screen
input
size
images
signal
I©1
4:3
input
signal
I ©1.
1g:9
see page
ratio.
on the menu
kems. (See page 27.)
22
Normal
Zoom
Stretch
©i
Keeps the original
aspect ratio in a full
screen display.
Stretch
Dot by Dot
C)
For viewing
widescreen
An image fully fills the
screen.
Detects the resolution
programs. The top
and bottom of the
of the signal and
displays an image with
the same number of
image
pixels on the screen.
is cropped.
Dot by Dot
©
An image fully fills the
screen.
3
Detects
the resolution
of the signal and
displays an image with
the same number of
pixels on the screen.
Example
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "System Options",
Central
Smart
2
Press A/Y
to select "Input Terminal Setling",
then press ENTER.
:3 Press A/_I!' to
and then press
4 Press A/T
to
and then press
5
and
select "PC input" or "Audio Select",
ENTER.
select a specific adjuslment item,
ENTER to set each item.
Press A/Y
(or _1/1_) to select or adjust the desired
setting, and then press ENTER.
(D-
47
Using a PC
For automatically
adjusting
the PC image.
Yea: Auto Sync. start and "Auto adjusting
No: This function does not work.
This function
audio.
..." displays.
The adjustment
source.
Select
•
"Auto Sync." may fail if the computer
image has low
resolution, has unclear (black) edges, or is moved while
executing
"Auto Sync.".
• Be sure to connect the PC to the -rv and sw_ch it on before
starting
sets
terminal
desired
[]
you
to change
cases,
can easily
image
however,
adjust
position
manual
the
using
picture
Select
"Auto
adjuslment
Sync.",
[]
In some
is needed
V-Pos.: Centers the image by moving
Clock: Adjust when the image flickers
stripes.
Phase: Adjust when characters
when the image flickers.
HDMI
because the screen poskion
asymmetrical.
• The screen poskion variable
Mode or the signal type.
position-setting
screen.
and
WXGA
o _
have low contrast
variable
ranges
ranges
depend
640 x 480
SVGA
800 x 600
When
a
adjust
the
the TV and PC are connected
correctly
to display
XGA
Horizontal
Vertical
VESA
Frequency
Frequency
Standard
automatic
Select
the default setting
this when
"Audio
Select"
cable,
set "Audio
the
RS-
of the TV
The TV can be controlled
232C terminal,
Use a cross4ype
available)
for the
from
RS--232C
connections.
a PC
cable
using
(commercially
70 Hz
O
kHz
60 Hz
O
• This operation system should be used by a person
accustomed
to using computers.
37.5
kHz
75 Hz
O
37.9
kHz
60 Hz
O
[] Communication
48.1
kHz
72 Hz
O
Set the RS--232C
communication
match the TV's communication
46.9
kHz
75 Hz
O
The
48.4
kHz
60 Hz
O
56.5
kHz
70 Hz
O
O
60.0
kHz
75 Hz
64.0
kHz
60 Hz
SXGA+
1400 x 1050
65.3
kHz
60 Hz
UXGA
1600 x 1200
75.0
kHz
60 Hz
1080p
1920 x 1080
67.5
kHz
60 Hz
trademarks
'rv's
who is
conditions
communication
settings
conditions,
settings
9,600
on the
PC to
are as follows:
bps
8 bks
None
1 b_
None
[] Communication
O
Send
232C
VGA and XGA
are registered
Business
Machines
Corp.
will
to
kHz
1280 x 1024
of International
is
and the
Select"
31.5
SXGA
is
sound
31.5
1024 x 768
is
the TV and PC are
is set to "HDMl(Digkal)",
using only an HDMI-certified
"HDMl(Digital)".
on the View
The ranges can be seen on the
PC
cable and the audio
mini jack.
not be produced
if you use only an HDMFcertified
cable to
connect HDMFcompatible
equipment.
To produce sound,
you should make an analog audio connection.
If you want to connect HDMFcompatible
equipment
may be
XGA
48
and then
input
to the
connected
using a DVFHDMI conversion
cable
audio is input via a Q 3.5 mm stereo mini jack.
or
signal.
720 x 400
Q-
selected
[] PC control
the
Resolution
VGA
computer
connected
using an HDMFcertified
cable and audio
input via the same cable.
HDMI+Analog:
Select this when the TV and PC are
0
to set
the
IN
HDMl(Digital):
k up or down.
wkh vertical
it is not necessary to adjust the "Clock" or "Phase" when
digital signal is being input, so k cannot be selected.
• The default cursor position may not be in the center,
@
this when
PC
using an analog RGB
Auto: Audio
"Auto".
to
•
!
to the
input via a © 3.5 mm stereo
as necessary
optimize
the image.
H-Pos.:
Centers the image by moving it to the left or right.
It is necessary
to output
using an analog RGB cable and the audio is not input.
Video+Audio:
Select this when the TV and PC are
connected
Ordinarily
terminal
items vary depending
on the
the input source
corresponding
connected
item.
PC IN
Video:
"Auto Sync.".
the
l
i
The
the control
connector.
TV operates
procedure
commands
according
from
to the
the
PC via the
received
R%
command
and sends a response
message
to the PC.
Do not send multiple
commands
at the same time.
Wait until the PC receives the OK response
before
sending
the next command.
Using a PC
[] Command
Command
4-digRs
Command
Parameter
4-digRs:
4-digits:
[] Response
Parameter
Command.
Parameter
code
code
Input the parameter values, aligning left, and fill with
blank(s) for the remainder. (Be sure that 4 values are
input for the parameter,)
When the input parameter is not within an adjustable
range, "ERR" returns. (Refer to "Response code format".)
Any numerical value can replace the "x" on the table.
_ CR
4 digRs
Return code
The text of four characters.
0-9, x, blank, ?
When "2" is input for some
commands,
the
present setting
value responds.
I_ I I I I
format
Normal response
Return
[] Parameter
format
Eight ASCII codes
Problem response (communication
error or incorrect command)
(0DH)
_
Return code
(0DH)
[] Command table
Commands not indicated here are not guaranteed to operate,
CONTROL
POWER
ITEM
ON COMMAND
COMMAND
SETTING
B iS
PARAMETER
i P iW'
0 i
iii
POWER
SFTING
i
CONTROL
i
Dff
liii
ploiwiR,01
i
SELECTION
TOGGLE
I
IT
R/
I
iTi\/iD
..........
IG i D
i
01
I IAI\/ID,
AM MODE
SELECTION
A ]\/
i
VOLUME
\/
POSITION
]M ] D
i
i
i
i
i
i
]
]
]
9: (Toggle),
i
i
i
3: GAME,
i i i
]O ] L ]M
]• ]
H i p i O i S.
i '
\/POSITION
\/
i_i*i
CLOCK
OJLJOJK
P iH i S i E
iP
W]l
IOIS
IDLE,
]
]
]
]
accepted
to standby
Power
q_gqle)
Ini-_ut
tenninalnumber(1 7)
i i i i
rejected
On colnmand
The Power
i i i
H POSITION
VIDNMODE
i
1: STANDARD(ENERGY
4: PC, E: DYNAMIC,
STAR),
6: DYNAMIC
2: MOVIE,
ENTS
On colnmand
The Power
It shifts
i
iiiliii
INPUT
oobrf
The Power
On Command
Off (LED power
must
be waited
indbator
switches
by the toggle
It input
switches
to TV (A channel
It input
switches
to INPUT1
Although
it carl
choose
until %,stem
(It is the same
remains
as an input
as it is (Last
now, it is toggle
operation
it] inside
(Fixed)
]
_/o]ume
i * i
(0_60)
©n_, PC nlode
(C_IO0
.........
diso]ay
range+/
EO)
©n_,POmode(C_4Dmenudisplayrange+/2D)
J'J*J
i • i*
i
©n_, PC mode
One, PC mode
]
]
]
D:iTuggle)
]
]
]
5: FulIScreen
(C_180,menu
(C_4D .........
l:Norm,_l
2:SStretch
6: Dot
by Dot
The screen
position
signal
The ranges
type
variable
ranges
carl
be seen
depend
on the View
on the position
3:Zoom4:Zoom
7: Cinema
0: Although
it carl choose
now
1: Av ail,_ble in [AM] SD timing
it is toggle
operation
and [PC] except
SURROUND
AUDIO
SELECTION
SLEEPTIMER
CHANNEL
DIRECT
I
I
]
]
]
:):Toggle)
1:On
2:Off
A iO i S i U
i
i
i
:): Toqgle)
1 : On
2: Oft
AiCiHiA:
i
i
i
OiFiTiM
I
I
I
I
i
I
i
I
i
I
D iO
iO
iH
'
i • i * i
The channelnumber
i
i
i
i
(1
CHANNEL
i
(ANALOG)
DIRECT
CHANNEL
I
some
i i i I
DJAJ2JP"
i
U
i
i
i
i i i
U]O]2]h,
i
i
of _/
135)
An input change is included
In Air 2 69ch is eftecbve
In Cable,
(01009999)
DIGITAL
(1999)
DIGITAL
i
1 135ch
Air (Two
DiCil
i_i*i
i0:
Dcilil
DIGITAL
(0999)
NAME
SOFTWARE
IP PROTOCOL
VERSION
i i i
Cable
(09999)
number
of %/+1
Theehannelnumberof%/
1
d DIGITAL
CABLE
CHANNEL
NO
major
channel)
3 digit)
(Designate
Cable
(One
Part numbers,
5 diqit,
less than
Cable
(One
Part numbers,
5 digit,
more
than
minor
channel)
10,000)
10,DOD)
it will input
switch
to TM (same function
as OH/X)
If it is not TV display,
it will input
switch
to TV
as OHM)
i
The device
name
i
i
i
The model
nanqe of the TV
i
i
i
The current
• If an underbar (_) appears in the parameter
column, enter a space.
• If an asterisk (*) appears, enter a value in the range indicated in brackets
• Any numerical value can replace the "x" on the table.
3 digit)
(Designate
If it is not TV display,
i
i i i
NO
3 digit plus
DIGITAL
i
i B i D
plus 2 digit)
3 digit plus
DIGITAL
Ti\/iNiM;
iwi\/i,
2 diqit
CHANNEL
Part numbers,
l
iN
q_;gclle)
(%vo
CABLE
i
IiPiPi\/
1 O8O
if it is not _/displ,b,
Part numbers,
i
s
1600X12D0,192DX
1920X1080
Pa_ numbers,
of DIGITAL
OihiOlP
M
\/EBSION
*
i_i_i* _o_
The channel
CHDOWN CIHIDIW
MODEL
i_i*i
OlHIJIP
rimming
1gDDX1200
is effective
Cable/Two
Front half
Rear half
CHUB
except
T,gqle)
i_i,i
!
1920X1080
OLD
items
r I)
9:OffI:OFFTIMER
90MIN,2:OEFTIMER
60MIN,
3:OFFTIMER
90MIN
4:OFETIMER
120MIN
J_J*J*
Dici2i
(DIGITAL)
i
or the
screen
in ,_,ail,_ble
timing
and [PC]
(*2)
1280X1024,1400X1
(*2) 196DX768,1966x768,1280X72D,
I
M]U]T]E,
Mode
setting
display range+/
90)
lisplay range+/
20)
('1) 136DX768,1366x768
I
key)
7: USER
6: Avail,_ble in [AM] 10801 and 1080p rimming
7: Only ava@ble in [PC] except some timng
I
change
memory))
INPUT7
2,3,4: Onb, available when
[AM] signal is being input
5: Av ail,_ble in [AM] 720p and [PC] except 1280X72D
MUTE
is complately
turn to be Bed)
It input
Toggle
operation
The currently
version
of a closed
under CONTROL
caption
set in "lP Control
Setup"
d the _,/software
supported
(same function
version
is displayed
is displ,b,
of IP protocol
ed
is displayed
CONTENTS.
@-
49
Using the Internet
By connecting your ]V to a broadband system, you can access the Internet from the 'FV,
Display the latest Intemet information and access a range of useful information for AQUOS
original home page*,
You can enjoy a variety of streaming content and Internet applications,
* About the original home page
The original home page is a website set up specifically for AQUOS owners,
The website is worth visiting as it provides a range of useful information, including
and a frequently asked questions section,
users from the
tips on using your AQUOS
To connecf your ]V to the Internet, you must have a broadband Internet connection,
If you do not have a broadband Internet connection, consult the store where you purchased your ]V or ask your
Internef service provider or telephone company,
When an Internet connection is made, an Ethernet and wireless connection cannot be used af the same time,
Use only one of the connection types,
[] Using an ETHERNET cable
Use an ETHERNE] cable (commercially
router (commercially available),
available) to connect
the ETHERNET terminal on the 'FV to your broadband
ETHERNET cable
Broadband router
PC
Modem
Q-
50
Intemet
Using the Internet
[] Using the wireless LAN
This 'FV is equipped with a wireless LAN function,
For a wireless [..AN connection, you must use "Wireless Setup" to connect the access
^
point and ]V.
_
3j
PC
Modem
•
This TV has a buikqn
that do not comply
•
the following
- Wi-Fi CERTIFIED
(certification
Protected
•
Operations
•
A wireless
manual
•
TM
Setup
cannot
TM
If your access
program
point
in this case,
A wireless
LAN connection
disable
mode
used in buildings
- When
placed
- When
used with other wireless
- When
used in the vicinity
Supports
made
near objects
For users outside
A stable connection
is unstable.
•
Before
•
Please follow
transferring
cannot
wkh concrete,
devices
of microwave
detection
using
a wireless
LAN. See the operation
by other devices),
reinforced
for all residential
speed
steel,
you may not be able to establish
a
point.
be guaranteed
or the connection
that obstruct
interference
telephones,
IEEE802.1
•
Internet
may become
environments,
in the following
cases,
the
slower.
or metal
the signal
that emit the same frequency
ovens and other devices
that emk a magnetic
field, electrostatic
charge,
or
interference
is significant
•
LAN adapter.
that do not have Wi-Fi ® certification.
the TV to the
mode on the access
and performance
- When
cordless
points
to connect
(that prevents
the stealth
LAN signal may be poor or drop,
2.4-GHz
wireless
for setup.
wireless
When there
may result in radio communications
do not use a separate
from the Wi-Fi Alliance ®)
used wkh access
is required
is set to a stealth
connection,
USB LAN adapter
Therefore,
from the Wi-Fi Alliance ®)
program
when
point
point
wireless
certifications.
be guaranteed
of your access
Using a separate
on radio communications.
(certification
LAN router/access
electromagnetic
•
LAN function.
This TV has received
- Wi-Fi
•
wireless
wkh regulations
Internet
lb/g/n.for
States,
speed
is required
to a third
frequency
ovens),
setup details,see
the Unked
the legislation
in the 2.4-GHz
and microwave
(such as from
k is recommended
the opration
manual
be sure to select your country
to play back
party or disposal,
in your country
streaming
be sure to initialize
when
of your access
before
content.
LAN devices,
Bluetooth
LAN router/access
® devices,
point
that
point.
using the wireless
Use an Ethernet
the wireless
using the wireless
other wireless
that you use a wireless
LAN function.
connection
(See page 60.)
if the wireless
LAN speed
LAN settings.
LAN outdoors.
(_)-
51
Using the Internet
=
=
=
@@@
@@@
@@@
@@
Q
Example
Smart
Cent_aE
US£
[] If you cannot connect to the Internet
Perform the procedures below to check your qV's
network settings,
1 Press EXIT to display the normal TV screen.
1 Press MENU to display the MENU screen, and then
press 4/1_ to select "initial Setup".
2
Press A/T
to select "lntemet
press ENTER,
3
Press A/T
to select "Network Setup",and
then press
ENTER if "interactive Service" is selected "YES".
Press 4/1_ to select "Wired" or "Wireless" at
4
"Connection
Setup",
2
Press MENU to display the MENU screen, and then
press _1/11_to select "initial Setup".
3
Press A/Y
to select "lntemet
press ENTER,
4
Press A/T to select "Network Setup", and then
press ENTER
• Check that numbers are displayed for each setting.
• if there are any settings wkhout numbers, specify the
numbers by following the on-screen instructions.
• For information on how to enter text, see page 53.
and then
Setup", and then
Example
7ype",
If your access point supports Wi-Fi Protected Setup
(WPS), it is recommended
that you use this function
for the wireless connection. You can press the WPS
button on the access point to configure the settings
automatically,
• The name of the WPS button function may differ depending
on the access point. See the operation manual of the
access point for details.
1 Confirm the current settings in "interface".
• if "Fi_thernet" is selected, press 4/_ to select "Wireless".
2 Press A/T
to select "Wireless Setup", and then
press ENTER,
• Confirm the settings, if each setting item is correct,
press MENU to exit.
• if you are configuring the wireless setup for the first
time or changing the settings, go to step 3.
If you do not want other people to connect to the
Internet in your absence, you can make settings to
keep the ]V away from the Internet,
1 Press MENU to display the MENU screen, and then
press 4/11_ to select "initial Setup".
2 Press A/y
to select "lntemet
press ENTER,
3 Press A/T
Setup", and then
to select "Interactive
Service",
4 Press 4!/_ to select "No", and then press ENTER.
• If you want to allow Internet connection, select "Yes",
and then press ENTER.
5 Press MENU to exit.
Q-
52
5
Press MENU
to exit,
This function can be used to display up--to--date
information on the original home page and allow you to
receive support service over the network.
Using
the
1 Press
press
2 Press
press
Internet
MENU to display the MENU screen, and then
4/_ to select "initial Setup",
A/T to select "lntemet Setup", and then
ENTER,
3
Press A/T to select "Network
ENTER if "interactive Service"
4
Press 4/1_
to select "Country"
5
Press _/1_
to select "US"
Connect to the IM with the following settings
IP on the PC.
TCP/IP
Set the IP address
Setup",and
then press
is selected "YES",
Set a pot1 number on the IM menu
(Control pod)
"Mexico"
at Country,
When you set your ID and password
• Select different country item,the language will
synchronously
change at Smart Central,
1 Press MENU to displaythe
MENU screen, and
thenpress 4/1_
to select "initial Setup",
2 Press A/V
to select "lnternet Setup", and then
press ENTER.
[] AQUOS
Remote
Disable: This function
Device
Press ENTER.
on the
Use the software keyboard to set the name, See
page 54 for details on the software keyboard,
Settings
Make the detailed settings
etc.). Follow the on-screen
confi gure the settings,
for 3 minutes,
settings
are as follows:
9,600 bps
8 bits
None
1 bit
None
does not work,
Names
Set the name of the TV displayed
porlable device,
[] Detailed
been no communication
communication
Enable: Allows operation from the connected
equipment.
[] Select
When you use this function, make settings for "
AQUOS Remote Control",
The connection win be cut off when there has
Set the RS--232C communication
settings on been no
match the ]M's communication
conditions, The TM's
Control
will be highlighted,
on the IM menu,
you need to enter them as soon as you connect to the
TM.
Remote Control",
Set this when operating the IM from equipment
connected by I..AN or wireless [..AN,
When "AQUOS Remote Control" is selected,
"Change"
on the IM menu
None (Do not select Telnet or SSH)
or "Canada"or
3 Press A / V to select "AQUOS
and then press ENTER.
made for
(Login ID, password,
instructions to
[] Communication
procedure
Send the control commands from the PC via the
RS--232C or IP, The IM operates according to the
received command and sends a response message
to the PC,Do not send multiple commands at the
same time, Wait until the PC receives the OK response
bdore sending the next command,
See RS--232C Port Specifications
format,
for Command
O-
53
Using the Internet
Alphabet
"
•
"
®
_
"
"
0®.
O
Press
When you are editing an input screen or specifying the
Ethemet settings used for accessing the Intemet, enter
text from the software keyboard,
•
You can enter up to 128 characters
4/11_
alphabet,
to select
number
• The selectable
fype
of characters
entered;
types
depend
on the input
source.
OK
Applies the entered
keyboard.
Cancel
for text.
the
or sign,
information
and closes
Erases the character string.
• When the cursor is somewhere
the software
in a line: the character
string to the right of the cursor will be erased.
• When the cursor is at the right end of a line: the entire
will be erased.
line
Delete
if the cursor is at the right end of a line, this erases
character at a time.
•
You can also delete text by pressing
remote control unit.
RETURN
text one
on the
if!if!i;
iiii_i_il;iiiiiiiiil;iil
ii_i
_i
_i_i_ii_iii_!i
!i!i!iiiii
!iiiiiiiiiiiiiiiiii
iiiiiii;ililili!i!i!i!i_
i_i!
i_
iiiiiiiiiiiii_
_i!;ii
i_i_i_i_i_ili!il
ii,i_!_
!i!_!_!_;_i_i!
iiilii
iiiii
iiiiiiiiii_!
_!!_!
i!i!i
!i_i!i_i_i_
i_i_ii!il
i!!!!ii!ii!ii!ii_ii_!ili_i_i_i
_iili
i!iiii_ii_iill
i_i;_!_i_!_i!_i_
:_i;:ili!i!;!_;!_i!_i!ili!
i!ii!!i
i_!i!
i!!!!!
!i_i_il
iiiiii_!!i_
iiii!i
iliii!
iii!!ii_ii
_ii_ii_i_ii_i
!!!iiiiii!ii!_iiiiii!ii
!_ii_i_
_iii!iiiiii
iili_!
_iiii_i_;
_i_i_ijii_i!i_i!
!i!ii!il
!ii!iii
i!!!!_i!iill
i!i_i_
i_i_i
_i!_iiiiil
iili
¸ili_ii
!_ii!ili!;!i;ii_i_i_
A
T
Moves the focus up. When the focus is at the top edge, this moves the focus to
the opposite edge (bottom edge).
Moves the focus down. When the focus is at the bottom edge, this moves the
focus to the opposite edge (top edge).
Moves the focus left. When the focus is at the left edge, this moves the focus to
the opposite edge (right edge).
When the focus is on "Character Set", this selects the character type (moving
backwards).
When the focus is in an input box, this moves the cursor in the input box to the left.
Moves the focus right. When the focus is at the right edge, this moves the focus to
the opposite edge (left edge).
When the focus is on "Character Set", this selects the character type (moving
forwards).
When the focus is in an input box, this moves the cursor in the input box to the
right.
ENTER
Performs the processing for the button currently in the focus.
EXIT
Closes the software keyboard and current setting menu.
RETURN
Closes the software keyboard without applying the original input elements for the
entered test.
Erases the text in the input box where the cursor is currently located.
(_-
54
Using the Internet
e
_ Oe
*,
e
"
.
=
=
"
These
By connecting
the
TV to the
variety
of broadband
content,
music,
photos,
and
Internet,
you
including
can enjoy
videos,
a
movies,
games.
applications
available
region.
The delivery
network
Please check that the most current
software
is
are provided
applications
speed
speed.
of applications
Check
details on application
by content
vary depending
providers.
varies depending
the web site of the provider
setup
and other
The
on your country
or
on the
for
information.
loaded on TV by selecting "Auto Update Setting
" on "Software
Update" (see pages 32 to 34)
or by visiting to check for adownload of the
http://www,sharpusa.com/products/support/
newest software version.
Centra_
Smart
1
Press Smart Centram to display the smart central window,
Example
2
Press
and
A/Y/_/_then
to select
press
the
desired
If "_2@_" or "D_"
is displayed
after you connect
Internet, check your TV's network
When using
this TV to access
the first time, the Disclaimer
Press
A/V
to select
(You must select
Additional
3
The
screen
Follow
the
application,
ENTER.
applications
for the
on-screen
an Internet
appears
"Agree",
"Agree"
application
for
on the screen.
and then
press ENTER
to use the application.)
will be available
selected
to the
settings and connection.
application
instructions
for
in the future.
is displayed.
each
application.
Check the web site of the provider
and use of the functions.
for details
on setup
Q-
55
Using the Internet
When you access the Intemet application for the first time, the following appears.
• This message is available only in English.
DISCLAIMERS
]his Sharp device fadlitates the access to content and services provided by third padies, The content and
services accessible via this device belong to and may be proprietary to third parties, Therefore, any use of such
third parry content and services must be in accordance with any authorization or terms of use provided by
such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by
such authorization or terms of use, Unless otherwise specifically authorized by the applicable content or service
provider, all third party content and services provided are for personal and non--commercial
use; you may not
modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works
from, transfer or sell in any manner or medium any content or services available via this device.
Sharp is not responsible, nor liable, for customer service-related
issues related to the third party content or
services. Any questions, comments or servbe--related inquiries relating to the third party content or service
should be made directly to the applicable content or service provider.
You may not be able to access content or services from the device for a variety of reasons which may be
unrelated to the device itself, including, but not limited to, power failure, other Jntemet connection, or failure to
configure your device properly, Sharp, its directors, officers, employees, agents, contractors and affiliates shall
not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause
or whether or not it could have been avoided.
ALL THIRD PART_ CONTENT OR SERVICES ACCESSIBLE VIA THIS DE}VICE IS PROVIDED TO YOU
ON AN "AS-IS" AND "AS AVAILABLE" BASIS AND SHARP AND ITS AFFILIAqES MAKE NO WARRANTY
OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT
LIMITA] ION, ANY WARRANTIES OF MERCHANTABILITY,
NON-INFRINGEMENT,
FITNESS FOR A PARTICULAR
PURPOSE OR ANY WARRANTIES OF SUFFABILITY, AVAILABILITY, ACCURACY, COMPLETENESS,
SECURITY,
TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNtNTERRUP[ED
OPERATION OR USE
OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET
YOUR REQUIREMENTS OR EXPECTATIONS.
SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILrfY
FOR THE ACTS OR OMISSIONS OF
THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE
RELATED TO SUCH THIRD PARTY PROVIDERS.
IN NO EVENT WILL SHARP AND/OR ITS AFFILIA_ ES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DIRECT, INDIRECT, SPECIAL, INCIDENTAL
PUNITIVE, CONSEQUENTIAL
OR OTHER DAMAGES, WHETHER
THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY,
STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
!v JJHD-ov,es
i v JJ
CihemaMow
@9- 56
Appendix
• Installing the "iV requires
special skill that should only be performed by qualified service
Customers
should not attempt to do the work themselves.
SHARP bears no responsibility
improper mounting
or mounting
that results in accident
or injury.
Wall mounting
personnel.
for
the TV:
1 Carefully place the TV face down on a soft and flat surface (blanket, foam, cloth, etc) to prevent any damage
the TV,
2 Remove the 4 screws from the mount holes.
3
Purchase a VESA compatible
14mm.
wall bracket
4
5
6
Locate the ideal ]V position on the wall,
Fix the wall bracket firmly on the wall,
Secure the TV to the bracket using the 4 mount screws
the FV,
to
(please refer to the table above): VESA 400 x 200, 4 holes, M8,
attached to the mount holes on the back and center of
Please read the instructions of your wall bracket to properly wall mount the TV,
The pitch of the mounting holes is 400mm horizontally and 200mm verfically.
The screws fype required is metric: M8, 14mm.
Q-
57
Appendix
Problem
Possible
• No power
• Check
if you pressed
• is the AC cord
• Has the power
• Unk cannot
be operated.
• External
• Remote
control
unit does
not
operate.
Solution
on the remote
control
unit. rot,Page
such as lightning,
static
electricity,
may cause
• Is the equipment
to be operated
by the remote
control
is cut off/wkh
• Strange color,
misalignment
sidebar
• Is the image position correct?
• Are screen mode adjustments
light color, or color
unk set correctly?
Press
TV
is suddenly
turned
off.
• No sound
2t to 22 and
sensor?
_ Pages 22 and 47
such as picture size made
correctly?
25
• Adjust the picture tone..t* Pages 25 and 26
• Is the room too bright? The picture may look dark in a room that is too bright.
• is the sleep timer set? _' Page 19
• Check the power control settings. ,_ Pages
• The unit's
clean.
•
•
•
-
-
-
(_D- 58
of the TV or
to set the remote control unk to the setting for operating the TV.
• Are batteries inserted with polarky ( _ , -) aligned? _ Page 9
• Are batteries worn out? (Replace wkh new batteries.)
,,_ Pages
• Power
improper
in this case, operate the unk after first turning off the power
the AC cord and replugging
k in after 1 or 2 minutes.
• Are you using k under strong or fluorescent
lighting?
• Is a fluorescent
light illuminated
near the remote control
• Picture
screen.
t7
disconnected?
_ Page 8
been turned on? .I, Page t7
influences
operation,
unplugging
POWER
internal temperature
has increased.
26
Remove
any objects
blocking
vent or
Is connection to other components correct? O Pages t2 to 16 and 43
is the volume too low? _ Page 19
Have you pressed MUTE on the remote control unit? _ Page 19
Check the audio output of the connected external equipment. Is the volume too
low or muted?
When external equipment is connected via an HDMI cable, you may need to
configure the audio to be output through the HDMI cable.
When audio is not output from external equipment connected to the PC IN or HDMI
1 terminal, check the "Audio Select" setting. ,_ Page 28
Even when external equipment is connected using an HDMI-certified cable, an audio
cable connection may be required depending on the type of equipment and the
media being played back. In this case, in addition to connecting an HDMI-certified
cable to the HDMI 1 terminal, connect a Q 3.5 mm stereo mini jack cable to the
AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". ,i. Page 28
When connecting a PC via an HDMI-certified cable, check the following:
- is the audio output of the PC configured correctly? Check the audio output
settings and output audio format in Sound Properties on the PC.
Only PCM format audio can be output. Compressed audio (with a sampling rate
of 32kHz, 44.1 kHz, or 48kHz) and DTS format audio cannot be output.
- Depending on the board, only video signals may be output. In this case, in
addition to connecting an HDMI-certified cable to the HDMI 1 terminal, connect a
Q 3.5 mm stereo mini jack cable to the AUDIO IN terminal and set "Audio Select"
to "HDMl+Analog". ,_ Page 28
If you are using a DVI-HDMI conversion cable to connect external equipment to the
TV, check the following:
- Is an audio cable connected? The DVI-HDMI conversion cable is for video only.
Connect a Q 3.5 mm stereo mini jack cable to listen to the audio.
- Is HDMI 1 being used? When the TV is connected to another HDMI terminal, the
audio and video are not output together even if a Q 3.5 mm stereo mini jack cable
is connected to the shared AUDIO IN terminal for PC IN and HDMI 1.
- Check the "Audio Select" setting. Set "Audio Select" to "HDMl+Analog". ,,_Page 28
Appendix
Problem
Possible
• No picture
• is connection
• Is the correct
• If the
Solution
to other components
correct? ,_ Page
input selected?
_ Pages 12 and 20
PC image
is not displayed,
check
the following:
- When connecting
a laptop PC to the TV, check
PC is set to external monitor.
- Check
the resolution
Page
• Picture
qualky
of HD programs
poor.
is
setting
• To enjoy HD images
• The cable/satellke
a
- The original
page cannot
output
mode
of the
signal being
input?
46
• The HD cable/satellke
via cable/satellite.
makes
that display
on the PC. is a non-compatible
from
external
equipment,
connection
or component
connection.
• If the program content is not of HD quality,
that the program you are viewing provides
• The TV sometimes
cracking sound,
12 to t6 and 43
set-top
broadcast
you are required
to set up HDMI
HD images cannot
HD images.
box may need to be configured
may not support
be displayed.
to output
a signal resolution
• This is not a malfunction.
This happens when the cabinet
contracts
according to change in temperature.
This does
Check
HD images
of 1080p.
slightly expands and
not affect the TV's
performance.
be displayed.
home
- Is the ETHERNET
• Check
the settings
cable
connected
of "lnternet
correctly?
Setup".
,_ Page
,,_ Pages
50
52 to 54
@9- 59
Appendix
CLEARING
THE SECRET
NUMBER
If you forget the secret number,
"1
Press MENU,
2
Select Initial Setup,
3
Prsee Individual Sefup
4.
Press number 7071,
5
Press Secref No,,
6
Enter new password,
• As a precautionary
measure,
clear the secret number
using the following
procedure,
,press "ENTER",
make a note
of your secret
number
Laboratories.
Dolby
above,
and keep
it in a safe place.
Trademarks
® Manufactured
Laboratories.
® "HDMI,
the
Licensing
® Products
efficiency.
under
HDMI
license
from
logo and High-Definition
LLC in the United
that
Dolby
have
earned
States
Multimedia
and other
the ENERGY
I®
VUDU
and the
TM
L C F Q N T,
is a trademark
CERTIFIED
® The Wi-Fi
Protected
® DLNA ®, the DLNA
O-
60
or registered
of Dolby
trademarks
of HDMI
|
J
i
J
STAR ® are designed
--E)L,'_m_
to protect
'z_ _' 1"-and LC logo mark
logo are the registered
Netflix
® The Wi-Fi
Living
are trademarks
are trademarks
the environment
through
superior
energy
i
J
L C _ :1 _/b-,
Netflix
Interface
symbol
countries."
This product
is embedded
with LC Font technology,
displaying
easy-to-read
characters
on LCD screens.
I®
and the double-D
Network
of VUDU,
Logo
Setup
Logo
Alliance.
trademarks
of Netflix,
trademarks
of SHARP
Corporation.
by SHARP Corporation
for clearly
are used for some screen pages, too.
Inc.
CERTIFIED
1
]
mark of the Wi-Fi
is a mark of the Wi-Fi
and DLNA
i
]
Inc.
is a certification
Mark
are registered
which was developed
However,
other fonts
Alliance.
are trademarks,
TM
i
J
Alliance.
service
marks,
or certification
marks
of the
Digital
]
Specifications
Item
LCD
LC-50LE650LI
Size
panel
50" Class ( 49 _/2 " Diagonal)
Resolution
2,073,600 pixels (1,920 x 1,080)
TV-standard (CCIR)
American TV Standard ATSC/NTSC System
TV
Function
Receiving
Channel
VHF/UHF
VHF 2-13ch, UHF 14-69ch
CATV
1-135ch (non-scrambled channel only)
Digital Terrestrial
Broadcast (8VSB) 2-69ch
Digital cable *_
(64/256 QAM)
Audio multiplex
1-135ch (non-scrambled channel only)
BTSC System
Audio out
10W x 2
Side
Rear
Terminals
Bottom
USB
INPUT1
Photo/Music/Video mode, Software update
HDMI in with HDCP
INPUT2
HDMI in with HDCP
INPUT3
HDMI in with HDCP
INPUT4
HDMI in with HDCP/HDMI ARC
RS-232C
D-sub 9 pin for service & Hotel mode using
INPUT5
COMPONENT/AV in
PC IN
Analog RGB (PC) in (15-pin mini D-sub female connector)
Audio PC/HDMI
Audio in (O 3.Smm jack)
ETHERNET
Network connector
DIGITAL AUDIO
OUTPUT
Digital audio output (RCA jack)
ANT. / CABLE
75 O Unbalance ,F Type x 1 for Analog (VHF/UHF/CATV) and DigkaI(AIR/CABLE)
Headphone out
Audio output (O 3.Smm jack)
OSD language
English/French/Spanish
Power Requirement
ON MODE POWER
AC 120V,60Hz
63 W
Power Consumption
Weight
TV + stand
120 W (0.5 W Standby with AC 120 V)
43 Ibs./19.5 kg
TV only
39.7 Ibs./18 kg
Dimension .2
TV + stand
44 _/s2 x 27 _/4 x 10 6s/64inch
6N x H x D)
TV only
44 _/s2 x 26_5/64 x
Operating temperature
319/82
inch
I 32°F to I 104°F (0°C to I 40°C)
Emergency alert messages via Cable are unreceivable.
The dimensional drawings are shown on the inside back cover.
As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
,, On Mode Power Consumption is measured according to Energy Star program requirements for televisions.
Cautions
regarding
use in high and low temperature
environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unk will recover when the temperature returns to normal.
• Do not leave the unk in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the front panel to malfunction.
Storage temperature: - 4°F to I 140°F (- 20°C to _ 60°C)
Q-
61
Specifications
FCC
This device compiles with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modifications not expressly approved by the par_ responsible
for compliance could void the user's authority to operate the equipment. To comply with the FCC RF exposure compliance
requirements, this device and its antenna must not be coqocated or operated in conjunction with any other antenna or
transmitter.
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel
mobile satellite systems;
The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p.
limit; and High-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and
5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.
COFETEL
This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from station of
the same kind, and may not cause harmful interference to systems operating on a primary basis.
CONTAINS TRANSMITTER MODULE COFETEL ID: RCPRART10-0859
Brand: RALINK
Model: RT5390
Specification
Standa[d
F[equency
Secudty
IEEE 802.11 b/g/n
Band
2412
5150
2484 MHz
5850 MHz
i WEP (64/128 bit key Index 1 only)
i WPA PSK (TKIP)
i WPA2 PSK (AES)
WPS 2.0
Modulation
DBPSK@I Mbps
i DQPSK(@2Mbps
CCK_5.5/11Mbps
i BPSK(@6/9 Mbps
QPSK_I
2/18Mbps
16 QAM@24Mbps
O-
62
Information
on the Software License for This Product
[] Software composition
The software included in this product is comprised
are held by SHARP or by third parties.
of various software
components
whose
individual copyrights
[] Software developed by SHARP and open source software
The copyrights for the software components
and various relevant documents included with this product that were
developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,
and other relevant laws. This product also makes use of freely distributed software and software components
whose copyrights are held by third parties. These include software components covered by a GNU General Public
License (hereafter GPL), a GNU L..esser General Public License (hereafter LGPL) or other license agreement.
[] Obtaining
source code
Some of the open source software licensors require the distributor to provide the source code with the executable
software components,
GPL and LGPL include similar requirements,
For information on obtaining the source code
for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the
following website:
http://www.sharpusa.com/gpl
We are unable to answer any questions about the source code for the open source software.
the software components
whose copyrights are held by SHARP is not distributed.
The source code for
[] Acknowledgements
The following are some of the open source software components
included in this product:
linux kemeVbusyb_x/g_ibc/z_ib/_ibpng/libjpeg/_ibic_nv/DirectFB/_penSSL/XMLRPC_EPVmtd.utiLs/Expat/Qt/
U..Boot/WM DR M/AGG(ver2,3)/device.-mapper/libfreetypdcURL/libxml2/luaYlua.-xmlreader/lua.-slncrypto/
F:fmpeg/SQLite/libzzip/c.-ares/librt/libjanus
For the complete
list, please see the URL above.
O-
63
information
on the Software
License for This Product
ImSoftware
Copyrights
XMLRPC--EPI
Copyright 2000 @ Epinions, Inc.
Iibjpeg
This software is copyright @ 1991-1998, Thomas G, L.ane.
Portions of this software are based in pad on the work of the Independent JPEG Group.
OpenSSL
Copyright @ 1998--2008 The OpenSSL Project.
This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit. (hllp://www.openssl.org)
SSLeay
Copyright @ 1995--1998 Eric Young (eay@cryptsoft.com)
This product includes cryptographic software written by Eric Young (eay@cryptsoft.com).
Expat
Copyright @ 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper.
Copyright @ 2001,2002,
2003, 2004, 2005, 2006 Expat maintainers.
Qt
The Qt GUt Toolkit is Copyright @ 2010 Nokia Corporation and/or its subsidiary(qes).
Contact: Nokia Corporation (qt-info@nokia.com)
WMDRM
Content owners use Windows Media digital rights management technology (WMDRM) to protect their
intellectual property, including copyrights. This device uses WMDRM software to access WMDRM
protected content. If the WMDRM software fails to protect the content, content owners may ask Microsoft
to revoke the software's ability to use WMDRM to play or copy protected content.
Revocation does not affect unprotected content. When you download licenses for protected content,
you agree that Microsoft may include a revocation list with the licenses, Content owners may require
you to upgrade WMDRM to access to their content. If you decline an upgrade, you will not be able to
access content that requires the upgrade.
libfreetype
Copyright
@ 2006, 2007, 2008, 2009, 2010 by David Turner, Robert Wilhelm,
Copyright
@ 19962010,
Copyright
@ 1998--2003
Daniel Veillard. All Rights Reserved.
@ 1994-2008
Lua.org, PUC--Rio
and Werner
l...emberg.
cURL
Daniel Stenberg,
(daniel@haxx.se)
libxml2
Lua
Copyright
Lua--xmlreader
Copyright
Lua--slncrypto
Copyright
libzzip
Copyright
@ 2008 A.S. Bradbury
@ 2005 Malete Partner, Berlin, partner@malete.org
@ Guido Draheim guidod@gmx.de
c--ares
Copyright
@ 1998 by the Massachusetts
Institute of Technology.
Group 42
zlib
Portions copyright
@ 2000 Group 42, Inc. and the Contributing
Authors.
Portions copyright @ 1995--1996 Jean-loup Gailly and Mark Adler.
RSA Data Security
MD5.CPP - RSA Data Security, Inc,, MD5 message..digest algorithm. Copyright @ 1991-2, RSA Data
Security, Inc. Created 1991. All rights reserved.
Fraunhofer IIS and Thomson Multimedia
MPEG l ayer-3 audio compression technology licensed by Fraunhofer IIS and Thomson Multimedia.
You cannot use the MP3 compressed
audio within the Software for real time or live broadcasts.
If you require an MP3 decoder for real time or live broadcasts, you are responsible for obtaining this
MP3 technology license.
Nellymoser, Inc
Speech compression and decompression
technology licensed by Nellymoser, Inc.
Sorenson Media, Inc
Sorenson TM Spark TM video compression and decompression
technology licensed from Sorenson Media,
Inc.
Sun Microsystem, Inc
ADPCM speech compression algorithm is used with the permission of Sun Microsystems,
Inc.
O-
64
Calling for Service
For location of the nearest Sharp Authorized Service,
customer assistance, please call 1-800--BE--SHARP.
or to obtain product
literature, accessories,
supplies,
or
LiMiTED WARRANTY
CONSUMER
LIMITED
WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
"Product"), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the
purchaser for parts or labor for the period(s) set forth below.
This
warranty
been
does
removed,
limited
for the
not
apply
defaced,
warranty
will
non-commercial,
to any
changed,
not
appearance
altered
items
of the
Product
with.
This
or tampered
apply if the Product
has been
household
use of the Product
for commercial
purposes
or in a commercial
setting,
vary. Please contact
f-888-BE_SHARP
for further
or if the
warranty
serial
does
number
not
or model
cover
or is being used in a commercial
setting
by consumers
in their home or residence.
there are warranties
information.
available
to cover
number
installation
or application;
If you intend
your
affixed
or signal
to the
reception
this warranty
to or already
use of this Product,
Product
has
problems.
This
is meant solely
use this Product
the terms
of which
may
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.
To the extent
permitted
by applicable
state
law, the warranties
set forth are in lieu of, and exclusive
of, all other warranties,
express
or
implied.
Specifically
ALL OTHER
WARRANTIES
OTHER
THAN
THOSE
SET FORTH
ABOVE
ARE EXCLUDED,
ALL EXPRESS
AND
IMPLIED
WARRANTIES
INCLUDING
THE WARRANTIES
OF MERCHANTABILITY,
FITNESS
FOR USE, AND FITNESS
FOR A PARTICULAR
PURPOSE
ARE
DISCLAIMED
PURCHASE
WHICH
SPECIFICALLY
OR
SET
VARY
EXCLUDED.
IF, UNDER
EXCLUDED,
THE DURATION
OF
FORTH
BELOW.
THIS WARRANTY
FROM
STATE
APPLICABLE
SUCH
IMPLIED
GIVES YOU
STATE
LAW,
WARRANTIES
Correction
of defects,
and responsibilities
of
in the manner
and for
Sharp
to the purchaser
by Sharp
and shall
other
representations
the period
of time
described
with respect
to the Product,
lack of reasonable
care, alteration,
modification,
tampering,
Product
which
were caused
by repairs
or attempted
repairs
warranties
THIS
or
in any way
responsible
or on remedies
LIMITED
for any
for breach
WARRANTY
Model Specific
IS VALID
incidental
in certain
ONLY
misuse,
improper
operation
performed
by anyone
other
be the sole
or promises
or consequential
transactions;
IN THE
economic
in such
FIFTY
states,
or property
the
(50} UNITED
or maintenance
than a Sharp
limits
STATES,
LC-50LE650U
Number & Description:
Period for this Product:
Additional Exclusions
Warranty Coverage
THE
may
DISTRICT
damages
servicer.
states
of all
claims,
way
negligence,
or defects
Nor shall
do not
allow
in the
Sharp
limits
on
apply.
OF COLUMBIA
AND
PUERTO
RICO.
LCD Color Television
to do to Obtain
Image
(if any):
Service
Service:
To
Retention
is provided
at 1-800-BE-SHARP.
for your
securely.
it in original
and
PURCHASE
Operation
shall
to the
product
not
Products
use two
the
for long
periods
Manual
on how
in the United
Service
Center,
instructions
that
are deemed
and
the
return
States.
call Sharp
on service
options
stolen
be sure
the
comparable
to avoid
it is insured
Product,
transport
protection
scratches
or misdirected
mail
of the
and
or for
damage.
damage
shipping.
in home
servicer
it once
Sharp may, at our
from an Authorized
CALL
to carry
provides
is covered
for lost,
during
for servicing,
persons
that
Product
be responsible
I f necessary,
ACCESSORIES,
is to be shipped
Please
that
incurred
facility
Center
Authorized
will provide
or packaging
ensure
in all areas and
Product
to and
OR
displayed
(see
zed Service
Sharp
Sharp
Product
packaging
Sharp
service
being
Product.
the
packaged
location.
image
Warranty
Authori
of the nearest
and
For
a fixed
by a Sharp
location
If it is deemed
Product,
from
by this Limited
this)
available
INFORMATION
resulting
is not covered
find the
toll free
PRODUCT
and Proof of Purchase available when you
One (1) year parts and labor from the date of purchase.
to prevent
OBTAIN
Some
not
fulfillment
of all
or in any
misuse,
from
of time
TO
BE
DATE OF
RIGHTS
and exclusive
remedy
made
by anyone
are
be liable,
accident,
or any
authorized
damage.
herein
(Be sure to have this information
need service for your Product.)
What
VALIDLY
Section
Your Product Model
Warranty
NOT
FROM
THE
HAVE OTHER
herein,
shall
constitute
complete
and shall constitute
full satisfaction
whether
based
on contract,
negligence,
strict liability
or otherwise.
Sharp does
not warrant
nor shall Sharp
responsible,
for Products
which have been subject
to abuse
(including,
but not limited
to, improper
voltage),
be liable
MAY
TO THE PERIOD(S)
YOU
MAY ALSO
TO STATE.
The warranties
given
herein
shall be the sole and exclusive
warranties
granted
available
to the purchaser
and only for the time
periods
set forth
herein.
No
permitted.
liabilities
IMPLIED
WARRANTIES
IS LIMITED
SPECIFIC
LEGAL
RIGHTS.
service,
may
completed.
a servicer
remove
the unit
In home
will come
for repair
service
is not
to your
at the
available
option,
elect to provide
transportation
Service
Center in those areas.
1-800-BE-SHARP
OR
VISIT
of the
www.sharpusa.corn
Q-
65
®
L|MITED
Consumer
WARRANTY
Electronics Products
Congratulations
Sharp
Electronics
of Canada
container
warranty
Product
period,
be free from defects
or provide the first purchaser
(a) Any
This
defects
or distributed
Jimited warranty
caused
as outlined
(b) Any defects
person
sold
("Sharp")
original
Conditions:
and
Ltd.
to the
in Canada
not apply
required
on your purchase!
first
by Sharp
in material
and
a replacement
shall
or repairs
warrants
purchaser
for this
other
than
Sharp,
a Sharp
of abusive
authorized
service
centre
or repairs
required
as a result of the
cleaning
tapes and chemical
cleaning
operation,
negligence,
to, transmission
line/power
Product
required
line
(g) Warranty
claims for Products
(h) Any Products
used for rental
(i)
Any
How
installation,
to get
setup
or a Sharp
use of the
agents.
service:
purchase)
and
home warranty
transportation
The
express
prohibited
or liquid
Home
Use Microwave
this warranty
on behalf
costs
are, except
law, Sharp
disclaims
all other
of trade, including,
without
and/or non-infringement.
purchasers
For
WARRANTY
to the
Product
and
with
domiciled
consumer
PER|ODS
in Quebec,
purchasers
domiciled
(calculated
from
66
installation
modified,
specified
appropriate
model,
serial
number
delivery
of the
Product,
together
in its
the defective
or inappropriate
adjusted
or approved
use
or repaired
by Sharp,
by any
including
Product,
including
cables
and paper.
wear and tear.
conditions,
including
and
CSA/cUL
with
proof
Drawer.
No other
person
(including
any
of Sharp. The purchaser
will be responsible
for consumer
warranties
limitation,
Limitations
but
but
not
but not limited
markings.
of purchase
(including
date
of
Sharp
servicing
dealer. In
or larger and on any Sharp
Sharp
dealer
for any and
and
purchasers
domiciled
conditions,
express
constitute
or service
all removal,
by the
this
the
of original
Of Canada
LiMiTED
arising
centre)
is
reinstalls-
limited
of the
in Canada
is governed
purchase):
whether
Parts
1 year
f year
I year
1 year
I year
I year
I year
1 year
I year
t year
Ltd.
at 335
Britannia
based
in which
by the laws
& Labour
(lamp
Road
IS VALID
ONLY
on contract,
negligence,
the
purchaser
has
component-4
purchased
noted)
additional
years)
on this
Sharp:
strict
or voiding
is, except
of Quebec.
(exceptions
East
|N CANADA
by
exemplary
or indirect
from or in any connec-
90 days)
(magnetron
statute,
advised
of the possibility
of such
and responsibilities
of Sharp to
SHARP
WARRANTY
to the extent
by law,
of certain
damages,
or limits on the duration
herein may not apply.
This limited
warranty
Province
warranty
claims,
except
and/or
quality, fitness
for
in Quebec
to the extent
special,
consequential,
economic,
or loss of use or loss of data) arising
of all
or limitation
and limits
laws
in Quebec
date
in lieu of and,
whether
even if Sharp is aware of or has been
complete
fulfillment
of all obligations
full satisfaction
the exclusion
the exclusions
governed
in Quebec,
or implied,
implied
warranties
or conditions
of merchantability
(not applicable
to consumer
purchasers
domiciled
at 905=568=7140
our Web site: www.sharp.ca
TH|S
12/17/10
shipped
the applicable
repair
dealer.
not
the name and address of the nearest Authorized
Sharp Service Centre or Dealer, or l'br more illtbrmation
Warranty, Sharp Extended Warranty 0 _bl:s, Sharp Canada Products or Accessol 7 Sales, please contact
• CaRing:
- Visiting
Q-
servicing
items
improper
with,
required
through
normal
use of the
probe, trays, filters,
belts, ribbons,
be liable for any incidental,
or damages
for loss of time
shall
By writing
to Sharp Electronics
Mississauga,
Ontario
L4Z 1 W9
Revision
tampered
authorized
Product
Audio Product
Blu-Ray Product
Projector
LCD TV
Microwave
Oven
Air Purifier
Portable Air Conditioner
Plasmacluster
ion Generator
3D Glasses
Wireless
LAN Adapter
It} obtain
IJmhed
either
of God.
or a failure of a Product,
limited warranty
constitute
or otherwise.
Some provinces
may not allow
warranties
or conditions;
in such provinces,
consumer
Product.
respect
when
will during
period,
incurred.
warranty
under Quebec
law): (a) Sharp
shall not
of any kind or nature (including
lost profits
with
or acts
upon
in this limited
by applicable
purchaser
liability
implied
spillage
be obtained
tion with the use or performance
of a Product
damages;
(b) the remedies
described
in this
the
Product
charges.
may
Oven or
or transfer
and insurance
warranties
course of dealing
or usage
a particular
use or purpose,
prohibited
damages
service
("Product"),
the
warranty
of this limited warranty
statement,
to an authorized
Sharp
service
centre or an authorized
may be provided,
at Sharp's
discretion,
on any Sharp Television
with the screen size of 40"
Over-The-Range
Microwave
authorized
to extend,
enlarge
tion,
voltage
programming
Warranty
a copy
service
that
surface or exterior
that has been defaced
or caused
by normal
as a result of damage
caused
by any external
or environmental
returned
with illegible
or without
or commercial
purposes.
and/or
product
dealer,
accident,
been
(d) Any replacement
of accessories,
glassware,
consumable
or peripheral
items
limited to, earphones,
remote controls,
AC adapters,
batteries,
temperature
(e) Any cosmetic
damage
to the
(f) Any defects
caused
or repairs
brand
Sharp
the applicable
to:
as a result
in the owner's
manual or other applicable
Product
documentation.
caused
or repairs required
as a result of any Product
that has
(c) Any defects
caused
not limited
to, head
Sharp
or by an authorized
workmanship,
and will within
of the defective
Product.
of
for
the
®
SHARP
ELECTRONICS
Sharp Plaza, Mahwah,
SHARP
CORPORATION
New Jersey 07495-1163
CORPORATION
Printed
in Mexico
Imprime au Mexique
Impreso en M_xico
083-0001-2135
XX