ViewSonic

®

3DPF8

3D Digital Photo Frame

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Kullanιcι kιlavuzu

- Gebruikshandleiding

- Pyководство пользователя

- 使用手冊 (繁體)

- 使用手册 (简体)

- 사용자 안내서

- ユーザーガイド

- ﻢﺪﺨﺘﺴﻤﻠﺍ ﻞﻴﻠﺪ

Model No. : VS13808

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive

2006/95/EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004%

Lead.

ViewSonic i 3DPF8

Important Safety Instructions

1. Read these instructions completely before using the equipment.

2. Keep these instructions in a safe place.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices

(including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs. Convenience receptacles and the point where they exit from the unit. Be sure that the power outlet is located near the unit so that it is easily accessible.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate normally or has been dropped.

15. Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

16. Only use battery packs approved by the manufacturer or else damage may occur.

ViewSonic ii 3DPF8

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the

European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance

Lead (Pb)

Mercury (Hg)

Cadmium (Cd)

Hexavalent Chromium (Cr6+)

Polybrominated biphenyls

(PBB)

Polybrominated diphenyl ethers

(PBDE)

Proposed Maximum

Concentration

0.1%

0.1%

0.01%

0.1%

0.1%

0.1%

Actual Concentration

< 0.1%

< 0.1%

< 0.01%

< 0.1%

< 0.1%

< 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS

Directives as noted below:

Examples of exempted components are:

1. Mercury in compact fluorescent lamps not exceeding 5 mg per lamp and in other lamps not specifically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, fluorescent tubes, and electronic ceramic parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

ViewSonic iii 3DPF8

Copyright Information

Copyright © ViewSonic ® Corporation, 2010. All rights reserved.

ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of

ViewSonic Corporation.

Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.

In the interest of continuing product improvement, ViewSonic Corporation reserves the right to change product specifications without notice. Information in this document may change without notice.

No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.

Product Registration

To meet your future needs, and to receive any additional product information as it becomes available, please register your product on the Internet at: www.viewsonic.com. The ViewSonic ®

Wizard CD-ROM also provides an opportunity for you to print the registration form, which you may mail or fax to ViewSonic.

Product Name:

Model Number:

Document Number:

Serial Number:

Purchase Date:

For Your Records

3DPF8

ViewSonic 3D Digital Photo Frame

VS13808

3DPF8_UG_ENG Rev. 1A 09-24-10

_______________________________

_______________________________

Product disposal at end of product life

ViewSonic respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit ViewSonic website to learn more.

USA & Canada: http://www.viewsonic.com/company/green/recycle-program/

Europe: http://www.viewsoniceurope.com/uk/support/recycling-information/

Taiwan: http://recycle.epa.gov.tw/recycle/index2.aspx

ViewSonic iv 3DPF8

Table of Contents

Introduction ..................................................................... 1

Features................................................................................................ 1

Package Contents ................................................................................ 2

Remote Control..................................................................................... 2

Getting Started ................................................................ 3

Picture Frame Overview ....................................................................... 3

General Use..................................................................... 4

Base Installation ................................................................................... 4

Operation .............................................................................................. 4

Power on/off your picture frame ............................................................ 4

Insert memory card ............................................................................... 4

Operations and Functions ............................................. 5

Main Menu ............................................................................................ 5

Photo Mode .......................................................................................... 5

Configuring the Photo View Settings .............................................. 6

Video Mode ........................................................................................... 7

Configuring the Video Playback ...................................................... 7

Music Mode .......................................................................................... 8

Configuring the Music Playback ..................................................... 8

Time/Date mode ................................................................................... 9

Storage mode ....................................................................................... 10

SETUP MENU ...................................................................................... 10

Connecting ...................................................................... 11

Connecting to PC.................................................................................. 11

Specifications ................................................................. 12

Troubleshooting ............................................................. 13

ViewSonic v 3DPF8

Introduction

Features

● Bright 8” (4:3) high-resolution color 3D TFT LCD panel

● Easy to transfer 2D photo and video into to 3D automatically

● Compatible with ViewSonic 3DV5 3D camcorder and 3DSC5 3D camera

● Auto slideshow with your personal MP3 music in the background

● Quickly play video file of MPEG 4 format

● Built-in battery for portable usage

● Compatible with USB flash drive and SD/SDHC/MMC

● Built-in speaker for music playback

● Direct USB connection to your PC for easy file transfers

● Clock, alarm and date functions

● Automatic Power Off

● Custom alarm clock settings - wake up to your favorite MP3 song

1. The screen is very delicate and can be damaged by pressing on it with excessive force.

2. Use a soft non-abrasive cloth, such as for cleaning camera lenses to gently wipe the screen.

ViewSonic 1 3DPF8

Package Contents

Please check that the package contains the following items:

Picture frame CD Quick Start Guide USB Cable

Power Adapter Remote control

In case the package content is not complete, please contact your dealer immediately.

Remote Control

Press Power button on the remote control pointing at the remote control sensor of this unit.

Power On/Off

Menu Button

Return Button

Enter/Play/Pause

Directional Buttons

Volume Down Volume Up

ViewSonic 2 3DPF8

Getting Started

Picture Frame Overview

Volume Button

IR receiver

Power On/Off

SD Card Slot

USB Connector

LED

DC-In

Speaker

Stand

Navigation button

OK/Play/Pause button

Return Button

Menu Button

Reset

DC power jack/USB connector for PC

ViewSonic 3 3DPF8

General Use

Base Installation

In the Photo Frame back, pull the stand out of the slot.

After a “stuck” sound, lift the stand by turning 45°. Then the installation is complete.

Operation

Before you can use the picture frame, it has to be connected to the power supply. Plug the connection cable  of the power adapter into the respective plug of the picture frame and plug the power adapter into a wall outlet .

Power on/off your picture frame

To power on the photo frame, please press the Power button longer than 3 seconds. To power off the photo frame, please press the Power button again.

The green indicator light will light up and the device will show the

ViewSonic screen.

Again press the Power power button on the side of Photo Frame, or press

[Note] The Power key on remote controller can switch the set between On and Standby mode only when the Photo frame is activated by the Power button at the side of frame.

Insert memory card and USB drive

Push the memory card (not included) gently into the respective card slot until it stops. When inserting a SD/

SDHC/MMC card, make sure that the contacts show to the back. You can also insert USB drive into USB slot instead.

ViewSonic 4 3DPF8

Operations and Functions

Main Menu

When you power on the 3D Digital Photo Frame, you will see the Main Menu appearing on the screen, which allows you to quick access the PHOTO, VIDEO, MUSIC, TIME/DATE,

STORAGE, and SETUP functions.

This chapter will guide you through how to use these functions of the device.

Photo Mode

1. On the Main Menu, select the PHOTO item and press OK to enter the Thumbnail

Mode. You can browse the thumbnails of all photos.

2. Use the Navigation buttons to navigate through the pictures.

3. Press OK on the selected thumbnail to view the picture in single view mode.

4. While viewing a picture, you can return to the Thumbnail Mode by simply pressing

Return.

5. In the Thumbnail Mode, you can:

● press Return to Main Menu; or

● press Menu to enter the Photo Menu.

ViewSonic

Thumbnail Mode

5 3DPF8

PHOTO MENU

PHOTO MENU allows you to configure the settings while viewing pictures, such as slide show speed, picture mode, background music playback, etc. See the next section for detailed information on configuring the settings.

Configuring the Photo View Settings

On the Photo List screen, press Menu button to enter the Photo MENU.

Setting

Slide show speed

Slide show mode

Picture Mode

Background Music

Available Options

Select the interval time between the pictures during the slide show: OFF, 5 sec, 10 sec, 15 sec, 30 sec, 1 min, 5 min, 10

min, 30 min, 1 hour, 4 hour, 8 hour or 12 hour.

● Folder - Start slide show of the pictures in the selected folder.

● All - Start slide show of all pictures in the device.

● Shuffle - Display the pictures randomly during slide show playback.

● Auto Fit - The selected picture will be displayed to fit the screen size automatically.

● Full Screen - The selected picture will be displayed in full screen mode.

● Off - Disable music playback during slide show.

● All - Play all music files during slide show.

● Album - Play the music files in the selected album during slide show.

● Shuffle - Play music randomly during slide show.

● Single - Play music in order during slide show.

ViewSonic 6 3DPF8

Video Mode

1. On the Main Menu, select the VIDEO item and press OK to display the Video List.

You can browse the list of all video files.

2. Use the Navigation buttons to navigate through the video files.

3. Press OK to start playing the video in full screen mode.

4. Simply press Return button to stop the video playback. Then you can select next video to play.

Video List

Configuring the Video Playback

On the Video List screen, press Menu to enter the VIDEO MENU.

Folder

Setting

All

Description

Start playback of the videos in the selected folder.

Start playback of all videos in the device.

ViewSonic 7 3DPF8

Music Mode

1. On the Main Menu, select the MUSIC item and press OK to display the Music List.

You can browse the list of all music files.

2. Use the Navigation buttons to navigate through the music files.

3. Press OK to start playing the music.

4. To stop the music playback and return to Music List, simply press Return. Then you can select next music to play.

Music List

Configuring the Music Playback

On the Music List screen, press Menu to enter the MUSIC MENU.

Setting

Play Mode

Save as the sound of alarm

Option

All

Album

Shuffle

Single

Alarm

1~4

Description

Start playback of all music files in the device.

Start playback of the music files in the selected album.

Play music randomly.

Play music in order.

Set the selected music file as the sound of alarm of the system.

ViewSonic 8 3DPF8

Time/Date mode

On the Main Menu, select the TIME/DATE item and press OK to set the date and time for the system. In addition, you can set up to four alarms for the system.

Time

Date

Alarm

Setting Description

Use the Navigation buttons UP / Down to set the correct time settings.

Select the date format (M/D/Y, Y/M/D, or D/M/Y. M: month,

D: day, Y: year) and then use the Navigation buttons UP /

Down / Left / Right to set the correct date settings.

Select the alarm item (1~4) and then complete the required settings:

● ON/OFF - Enable or disable the alarm.

● Time - Use the Navigation buttons UP / Down / Left /

Right to set the alarm time.

● Repeat - Select the repeat time for the alarm.

If there is any inconsistency on time settings, the message “Conflict setting” will appear on the screen.

ViewSonic 9 3DPF8

Storage mode

On the Main Menu, select the STORAGE item and press OK to select the storage media:

SD/SDHC/MMC card, USB device, or Internal memory.

Setting

SD/MMC

USB

Internal Memory

Description

Select the inserted SD/MMC card as the storage media.

Select the connected USB device as the storage media.

Select the internal memory as the storage media.

SETUP MENU

On the Main Menu, select the SETUP item and press OK to customize your 3D Digital

Photo Frame.

Setting

Language

Auto Off

Icon

Brightness

Contrast

Default

ViewSonic

Description

Choose the preferred language for the system.

You can set this setting as Auto Off.

Enable or disable the icon for the system.

Adjust the brightness level of the LCD screen.

Adjust the contrast level of the LCD screen.

Select to restore the factory default settings.

10 3DPF8

Connecting

Connecting to PC

For copying data into the internal memory, you can connect the 3D Digital Photo Frame via the USB connection directly with the PC. Use the supplied USB cable and your PC, then turn it on by pressing POWER button at the side. Now, all necessary system drivers are installed and after a few seconds, a popup window will appear and display that the device can be used as the data storage.

To PC/NB

To Photo frame DC in

ViewSonic 11 3DPF8

Specifications

Item

Panel

3D display format

Photo

Video

Audio

Functions

Storage

Power

Battery

Description

Panel size: 8”

Panel resolution: 800 x 600

Photo: Support original 3D photo side by side format (*.JPG)

Video: Support original 3D video “side by side” clip with *.MP4 (MPEG H.264)

Max. Video Resolution: up to 720P/30fps.

Photo format: JPEG

Max. resolution: 16 Megapixel

Auto slide show: Yes

Video format: *.MP4 (H.264)

Clip: Up to 720P/30fps *.MP4 (H.264)

Audio format: MP3

Background music: Yes

Speaker: Yes

Date: Yes

Calendar: Yes

Alarm: Yes

Auto off: Yes

Internal memory: 128MB

External memory card: SD/SDHC/MMC (up to 32GB)

USB flash drive: Yes (USB 2.0 host & slave)

External Power Supply: AC 100~240V, 50~60

Hz, 5V, 2A

Rechargeable Li-polymer 1200mAH, embedded

ViewSonic 12 3DPF8

Troubleshooting

Power indicator is not lit.

Problem

No start-up interface.

Can see start-up clock, but could not play (when a card or USB drive is present).

The order of image files is not what I wanted.

Cause

Power is off or power indicator is broken.

AC adapter is not well connected or does not power on normally.

Card is not correctly inserted or card is corrupt or not fully compatible.

The order of files is sorted by file name. Numbers have higher priority than alphabets.

Solution

Check whether the AC adapter is well connected and power supply is normal.

Check whether the AC adapter is well connected and make sure the photo frame is powered on normally.

Insert the card correctly; format the card before copy files, or replace with a new card.

Rename the files.

Since there are many brands of memory cards, please test the compatibility on the spot when you purchase the memory cards. This digital photo frame could not support pirate cards. If the memory card is correctly inserted, and the startup interface is displayed but the photo frame can not read the card, please turn off and restart the photo frame, or format the card and re-copy files.

ViewSonic 13 3DPF8

Customer Support

For technical support or product service, see the table below or contact your reseller.

Note : You will need the product serial number.

Country/Region

Australia/New

Zealand

Canada

Europe

Hong Kong

India

Ireland (Eire)

Website www.viewsonic.com.au

www.viewsonic.com

www.viewsoniceurope.com

www.hk.viewsonic.com

www.in.viewsonic.com

T = Telephone

F = FAX

T= 852 3102 2900

T= 1800 11 9999

T= 080 333 2131

Email

AUS= 1800 880 818

NZ= 0800 008 822

T (Toll-Free)= 1-866-463-4775

T (Toll)= 1-424-233-2533

F= 1-909-468-3757 [email protected]

[email protected]

www.viewsoniceurope.com/uk/Support/Calldesk.htm

[email protected]

[email protected]

service_ie@ viewsoniceurope.com

[email protected]

Korea

Latin America

(Argentina) www.kr.viewsonic.com

www.viewsonic.com/la/

Latin America (Chile) www.viewsonic.com/la/

Latin America

(Columbia) www.viewsonic.com/la/

Latin America

(Mexico) www.viewsonic.com/la/ T= 001-8882328722 [email protected]

Renta y Datos, 29 SUR 721, COL. LA PAZ, 72160 PUEBLA, PUE. Tel: 01.222.891.55.77 CON 10 LINEAS

Electroser, Av Reforma No. 403Gx39 y 41, 97000 Mérida, Yucatán. Tel: 01.999.925.19.16

Other places please refer to http://www.viewsonic.com/la/soporte/index.htm#Mexico

Latin America (Peru) www.viewsonic.com/la/

Macau www.hk.viewsonic.com

Middle East ap.viewsonic.com/me/

T= 0800-54565

T= 853 2870 0303

Contact your reseller [email protected]

[email protected]

[email protected]

Puerto Rico & Virgin

Islands www.viewsonic.com

T= 0800-4441185

T= 1230-020-7975

T= 01800-9-157235

T= 1-800-688-6688 (English)

T= 1-866-379-1304 (Spanish)

F= 1-909-468-3757 [email protected]

[email protected]

[email protected]

[email protected]

[email protected]

Singapore/Malaysia/

Thailand

South Africa

United Kingdom www.ap.viewsonic.com

ap.viewsonic.com/za/

T= 65 6461 6044

Contact your reseller [email protected]

[email protected]

service_gb@ viewsoniceurope.com

United States www.viewsonic.com

T (Toll-Free)= 1-800-688-6688

T (Toll)= 1-424-233-2530

F= 1-909-468-3757 [email protected]

ViewSonic 14 3DPF8

Limited Warranty

ViewSonic ® Digital Photo Frame

What the warranty covers:

ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.

How long the warranty is effective:

ViewSonic Digital Photo Frame are warranted for 1 year for labor from the date of the first customer purchase.

Who the warranty protects:

This warranty is valid only for the first consumer purchaser.

What the warranty does not cover:

1. Any product on which the serial number has been defaced, modified or removed.

2. Damage, deterioration or malfunction resulting from: a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product.

b. Any damage of the product due to shipment.

c. Removal or installation of the product.

d. Causes external to the product, such as electrical power fluctuations or failure.

e. Use of supplies or parts not meeting ViewSonic’s specifications.

f. Normal wear and tear.

g. Any other cause which does not relate to a product defect.

3. Any product exhibiting a condition commonly known as “image burn-in” which results when a static image is displayed on the product for an extended period of time.

4. Removal, installation, one way transportation, insurance, and set-up service charges.

How to get service:

1. For information about receiving service under warranty, contact ViewSonic Customer Support

(please refer to Customer Support page). You will need to provide your product’s serial number.

2. To obtain warranted service, you will be required to provide (a) the original dated sales slip,

(b) your name, (c) your address, (d) a description of the problem, and (e) the serial number of the product.

3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic service center or ViewSonic.

4. For additional information or the name of the nearest ViewSonic service center, contact

ViewSonic.

ViewSonic 15 3DPF8

Limitation of implied warranties:

There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and fitness for a particular purpose.

Exclusion of damages:

ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for:

1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference with business relationships, or other commercial loss, even if advised of the possibility of such damages.

2. Any other damages, whether incidental, consequential or otherwise.

3. Any claim against the customer by any other party.

4. Repair or attempted repair by anyone not authorized by ViewSonic.

4.3: ViewSonic DPF Warranty DPF_LW01 Rev. 1A 06-20-08

ViewSonic 16 3DPF8