WAGNER | Plast Coat 35 | User manual | PlastCoat PC 25/ PC 35

Add to my manuals
6 Pages

advertisement

WAGNER | Plast Coat 35 | User manual | PlastCoat PC 25/ PC 35 | Manualzz
PlastCoat PC 25/ PC 35
The powerful ones
Plaster spraying indoors
and out with equipment
geared to practical use.
Quality
ive!
Offens
With their plaster spraying units WAGNGER have made it easier to get into
the machine application of plaster. The equipment will save you laboriously
carrying buckets and will ensure a uniform coating quality.
In the WAGNER equipment range you
will find all you need for effective plaster spraying: pumping units, mixers,
Areas of application and
materials which can be
applied:
spray lances and lots of practical accessories to make your work easier. Over
many years of collaboration with material manufacturers and users we have
developed high-grade equipment for
reliable use, right up to the logistically
optimised building site.
PlastCoat PC 25/
PlastCoat PC 35
These are the powerful plaster spraying
units for indoor and outdoor use.
Textured plasters up to 5 mm grain size,
filler compounds, bonded thermal insu-
The PC 25 and PC 35 can be profitably
used in many areas of application:
š Bondedthermal insulation
systems
• Application of adhesive to the
insulation panels and brickwork
• Laying on the reinforcing fabric
š Sprayingon textured plasters
• Mineral plasters
• Synthetic resin and silicon resin
plasters
• Silicate plasters
š Smoothingand texturing
• Smoothing filler compounds
š Concrete maintenance
• Application of pore filler slurries
• SPCC fine grade filler
• Suspensions of cement
• Cement adhesives
š Otherareas of application
• Coarse fibre paints
• Rolling and brushing plasters
• Porous concrete coating
• Acoustic plaster systems
• Concrete contact primers
• Fire bulkhead sealant
• Flame-proofing coating
High-grade
stainless
steel hopper
Compressor V400 practically mounted on the unit
(accessory). Illustration
doesn‘t correspond to the
scope of supply.
lation systems and much more can be
applied with them.
š Sealingbuildings
• Thick coating
• Water based bituminous
emulsions
• Mineral sealing systems
Technical Data PC 25
Quality-offensive!
With each newly purchased professional paint spraying
unit you will get a 3 year manufacturer's guarantee
from WAGNER. This is unique in the industry. Ensure
two additional years of guarantee with your Online
Registration.
Because: We are convinced of our professional quality.
Take our word for it!
Motor rating
2.2 kW
Voltage
230 V / 50 Hz
max. delivery rate
10/15/20 l/min*
max. delivery radius
40 m
max. delivery height 20 m
Weight with hopper 85 kg
max. grain size
5 mm
Working pressure
max. 40 bar
* depending on the pump used:
10 l/min – W 10/3
15 l/min – W 15/2
20 l/min – W 20/1.5
Automatic pump
extractor
integral,
maintenance-free
pressure gauge at
pump outlet
absolutely
water-tight switch
not susceptible to
contamination
PlastCoat PC 25 and PC 35: effective and ideal for the construction site
š The high-grade stainless steel
hopper will hold 60 litres of
ready-to-spray material.
Material valve (1)
Compressed air
regulator (3)
š The units are of light construction
and can be assembled and cleaned without tools.
š Smooth adjustment of the material flow rate is possible, from 0 to
25 litres per minute.
Electric switch (2)
A world first:
š A hose length up to 50 m gives a
large radius of action.
š An integral interface for container
operation is already provided.
š The compressor V400 can be
fixed directly onto the equipment.
The automatic spray lance
The automatic spray lance is especially
easy to use and allows the user to
regulate all the main functions of the
equipment, directly from his place of
work:
š The PC 25/ PC 35 is switched on automatically when the material valve (1) is
opened. The electric switch (2) takes
care of this.
š When the material valve (1) is closed
the unit will be switched off automatically.
š The air feed (3) can also be regulated
directly at the spray-lance.
Material hose
package with air
hose and control
cable (accessory)
š When the spraying process is ended
the PC 25/35 is switched off at the
integral electric switch (2). This
depressurises the material hose and
shuts off the material feed.
š Due to this depressurisation the wear
on the pump and the ball valve is
minimal.
š This ensures soft starting for the next
spraying run.
Technical Data PC 35
The automatic spray
lance regulates all
the main functions
of the equipment
(accessory)
Motor rating
3.6 kW
Voltage
400 V / 50 Hz
max. delivery rate
15/20/ 25 l / min*
max. delivery radius
50 m
max. delivery height 30 m
Weight with hopper 87 kg
max. grain size
5 mm
Working pressure
max. 40 bar
* depending on the pump used:
15 l/min – W 10 / 3
20 l/min – W 15 / 2
25 l/min – W 20 / 1.5
The right equipment systems for practical use
Outdoors
Indoors
Application of bonded thermal
insulation systems
Application of
smoothing and
spraying fillers
Application of the adhesive onto
the insulation panels
At the push of a button, the supply
pump transports the adhesive to you
and you apply it directly onto the insulation panels with a spray gun. (Release
the trigger of the gun and the unit on
the ground switches off automatically.)
A special adapter on the gun simplifies
the application of bonded thermal
insulation adhesive in spots/beads.
Application of the reinforcement
layer
Smoothing
A texture spray head fitted with a 10
mm nozzle ensures an even application
of the reinforcement adhesive. The
reinforcement fabric is then laid into
this horizontally and skimmed over
with a smoothing filler. Using this working method the PlastCoat equipment
gives a clear time advantage of up to
40 % compared to manual application.
The PC 25 and PC 35 are suitable, for
example, for smoothing over pre-cast
concrete ceilings and large-scale brickwork.
Application of the top plaster
Texturing
Finishing plaster with a grain size of up
to 5 mm can be sprayed on with this
equipment. A time advantage of up to
30 % is achieved compared to handapplication, and depending on the
material the equipment can deliver
up to a height of 30 m and a distance
of 50 m.
After smoothing a start can be made on
texturing the ceiling and wall surfaces
in living rooms and in the stairwell. Here
the PC units offer a wide variety of
possibilities for decorative design, from
extremely fine, medium and coarse fibre
textures right up to the application of
spray plasters and polystyrene effects.
The smoothing and spraying filler is fed
directly from the plastic bag into the
stainless steel hopper via the sliding lid
and roller extraction press.
Compared to hand-application
you save time and effort
by the machine application of plasters!
Completely automatic mixing and pumping
in one – the rolling mini-silo
for small and large building sites
The combination of a PlastCoat
delivery pump and a T 25 K
Flow-line mixer gives an enormous
saving of time and effort, even when
only mixing small quantities on a
small building site. One person is
enough; the mini-silo will do the
rest.
How the mini-silo works:
The Flow-line mixer mixes dry material and water and supplies the ready
mixed material to the plaster application unit. At the push of a button the
worker on the scaffolding can now
make material available at the lance.
The „K“ in the T 25 K Flow line
mixer stands for „Communication“,
which means that the equipment
thinks for itself:
Not only automatic mixing but also
automatic control over the supply of
dry material and water is ensured by
the dry probe and the water pressure sensor. The wet probe installed in
the delivery pump requests ready
mixed material from the flow-line
mixer. If no more is available, the
equipment will switch off automatically.
For the user this means:
• Effort-saving continuous working
(with no mixing or bucket carrying)
The rolling mini-silo that thinks for itself :
T 25 K Flow line mixer + push on hopper with
system accessories and a total capacity of
250 kg = a surface coverage of about 70 m2
Dry probe:
measures the level in
the material hopper
Water pressure sensor:
checks the water
pressure during the
mixing process
• Convenient operation of all major
functions such as the feed of material, directly at the lance
• Convenient transport of the rolling
mini-silo
The wet probe requests
mixed material from the
flow-line mixer
T 25 K Flow-Line mixer and accessories
Basic unit
Technical Data T 25 K
Motor rating
2.2 kW
Voltage
230 V / 50 Hz
0343 002
T 25 K flow-line mixer / 230 V
T 25 K flow-line mixer / 400 V
For preparations of material or for combination with a PC 15, PC 25 or PC 35 delivery
pump
Mixing rate
ca. 20 l / min
Capacity
100 kg
Weight
105 kg
Dimensions for
transport
122 x 75 x 60 cm
Flow-line mixer accessories
0343 700
0343 701
0343 709
0343 908
Water flow meter
Canvas cover
Vibration set
Push on hopper system accessories (mini-silo)
PlastCoat PC 25/35 and accessories
Application of filler (plastic bags)
Basic units
0348 030
0348 040
PC 25 incl. standard accessories
PC 35 incl. standard accessories
0348 909
0348 930
0348 912
0348 946
0342 255
0342 215
Mortar hose DN 19-10 m, V27/Rd32x1/8“ connection
Mortar hose DN 19-20 m, V27/Rd32x1/8“ connection
Mortar hose DN 27-10 m, V27/M27 connection
Mortar hose DN 35-13.3 m, V35/M35 connection
Mortar hose DN 19-2 m, V27/Rd32x1/8“ connection
Hose holder
0348 224
0348 904
0348 923
0348 919
0348 931
0342 200
0268 216
0342 291
0342 240
100 mm long spray lance with automatic
500 mm extension set for automatic spray lance
800 mm extension set for automatic spray lance
800 mm ceiling spray lance 7 with automatic
70 angle spray head for automatic spray lance
100 mm long spray lance without automatic
Pressure switch for spray lance w/o automatic
Application gun, V27 connection, for applying adhesive
for bonded thermal insulation Texture spray head for application gun 0268 779
0348 915
0268 780
0348 916
0268 781
0348 917
0268 782
0342 327
0268 905
0342 916
4 texture nozzle
5 texture nozzle
6 texture nozzle
7 texture nozzle
8 texture nozzle
9 texture nozzle
10 texture nozzle
12 texture nozzle
Texture nozzle set 4, 6, 8, 10
Texture nozzle cleaning needle
0342 321
0342 241
0348 948
Fixed nipple adapter V35/M27
Cleaning adapter M27/GK
Cleaning adapter M35/GK
0342 330
0342 331
0342 332
0342 329
19 mm cleaning ball
27 mm cleaning ball
35 mm cleaning ball
Cleaning brush for outflow unit
0348 908
0268 728
Sliding lid for hopper
Bag mangle
0348 907
Container suction system
0342 906
0348 957
V400 compressor
with automatic shut-off, intake volume 360 l/min
Compressor mounting for V400
0348 315
0348 316
0348 925
0348 926
0348 927
0348 928
9992 824
Pump casing W10/3 yellow (standard)
Pump worm W10/3 yellow (standard)
Pump casing W15/2 brown
Pump worm W15/2 brown
Pump casing W20/1.5 green (adjustable tension)
Pump worm W20/1.5 green
Pump lubricant 500 ml
0342 314
9971 531
Fixed coupling seal M27
Fixed coupling seal M35
0348 958
Accessory box filled with a variety of accessories
Mortar hoses
Working from containers
Compressors
Pumps
Spray lances
Seals
Texture nozzles
Cleaning balls
www.wagner-group.com
Ask about other products from our company:
Low pressure spraying equipment, piston and
diaphragm pumps, material transfer logistics
…and much more.
Information can be found in our current compass
on www.wagner-group.com/profi
Printed in Germany · Subject to modifications · GB · 9121 303 · 01/2010 MS
Adapters
Accessory kit in plastic toolbox

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement