Canon SELPHY CP810 User guide

Printer User Guide
C
Y
P
O
ENGLISH
OO Make sure you read this guide including the “Safety Precautions”
section before using the printer.
OO Read this guide carefully for the correct use of the printer.
OO Keep this guide handy for future reference.
Package Contents
Check if the following items are included in your printer package, using the
If anything is missing, contact the retailer where you purchased the printer.
□ SELPHY Printer Unit
□
Paper Cassette
(Postcard Size (4 x 6 in.))
PCP-CP400
□ SELPHY CP810
Solution Disk
□ check boxes.
□ Compact Power Adapter
□ Power Cord
□ Cleaner Unit*
□ Dust Protection Cover
CA-CP200 B
1
DPC-CP100*2
□ Printer User Guide
Y
P
O
(This Guide)
C
□ Warranty Card
*1 May not be included in some regions.
*2 May not be included in some regions. Purchase separately if required.
Ink and Paper (Sold Separately)
Before using the printer, be sure to purchase a Color Ink Cassette/Paper Set separately.
Color Ink Cassette/Paper Set
Product Name
Color Ink Cassette/Paper Set KP-36IP
(Postcard)
Color Ink Cassette/Paper Set KP-72IN
(Photo Paper)
Color Ink Cassette/Paper Set KP-108IN
(Photo Paper)
Color Ink Cassette/Paper Set KL-36IP
Color Ink Cassette/Paper Set KL-36IP
3 Pack
Paper Size
Postcard Size
72
Paper Cassette PCP-CP400
(Included with SELPHY)
108
L Size
36
108
Paper Cassette PCPL-CP400*
36
Card Size
* Purchase separately with Color Ink Cassette/Paper Set.
Some accessories may not be available in some regions.
2
Necessary Paper Cassette
36
Color Ink Cassette/Paper Set KC-36IP
Color Ink Cassette/Label Set
KC-18IF (Full Page Sticker)
Color Ink Cassette/Label Set KC-18IL
(8 Stickers Per Page)
Number of
Possible Prints
18
18
Paper Cassette PCC-CP400*
Read This First
OO The images printed with this product should be intended for personal use. Do not print images that
infringe upon copyright laws without the prior permission of the copyright holder.
OO This product’s warranty is only effective in the country of sale. If there is a problem with the printer
while abroad, please return it to the country of sale before proceeding with a warranty claim to a Canon
Customer Support Help Desk.
OO The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.99%
of the pixels operate to specification. However, some pixels may occasionally misfire or appear as red or
black dots. This has no effect on the printed image and does not constitute a malfunction.
OO The LCD monitor may be covered with a thin plastic film for protection against scratches during shipment.
If so, remove the film before using the printer.
Conventions Used in this Guide
OO
OO
OO
OO
OO
OO
OO
OO
This printer will be referred to as “SELPHY” or “printer”.
Icons are used in the text to represent SELPHY’s buttons. For details, refer to “Controls” (p. ‌6).
Language that displays on the screen appears inside [ ] (square brackets).
: Indicates important notes.
: Indicates tips and additional information.
(p. xx): Indicates page reference. xx indicates the number of pages.
This guide assumes all functions are at their default settings.
The various types of memory cards that can be used in this printer are collectively referred to as “memory
cards”.
Table of Contents
C
Y
P
O
Package Contents_________________________ 2
Maintaining the Printer_____________________ 17
Ink and Paper (Sold Separately)______________ 2
Cropping and Printing Images_______________ 18
Read This First___________________________ 3
Printing ID Photos________________________ 19
Conventions Used in this Guide______________ 3
Printing a Variety of Images_________________ 21
Safety Precautions________________________ 4
Printing From Your Computer_______________ 26
Setting Up SELPHY________________________ 5
Installing and Starting the Software___________ 28
Component Guide_________________________ 6
Printing Images with the Software____________ 30
Information Displayed on the Screen__________ 7
Printing From Your Digital Camera___________ 32
Getting Started___________________________ 7
Printing Images Using Digital Camera Specified
Setting the Display Language_______________ 11
Settings (DPOF Print)_____________________ 33
Compatible Memory Cards and
Printing When a Power Outlet is not Available__ 34
Memory Card Slots_______________________ 12
Troubleshooting _________________________ 35
Images That Can Be Printed________________ 12
Specifications___________________________ 37
Selecting and Printing Images_______________ 13
Handling SELPHY________________________ 39
Printing All Images________________________ 16
Storing the Printed Photos__________________ 17
Cleaning Up After Printing__________________ 17
3
Safety Precautions
OO Before using the product, please ensure that you read the safety precautions described below. Always
ensure that the product is used correctly.
OO The safety precautions noted on the following pages are intended to prevent injuries to yourself and other
persons, or damage to the equipment.
OO Be sure to also check the guides included with any separately sold accessories you use.
Warning
Denotes the possibility of serious injury or death.
OO Store this equipment out of the reach of children and infants.
Mistakenly putting the power cord around a child’s neck could result in asphyxiation.
OO
OO
OO
OO
Use only recommended power sources.
Do not attempt to disassemble, alter or apply heat to the product.
Avoid dropping or subjecting the product to severe impacts.
To avoid the risk of injury, do not touch the interior of the printer if it has been dropped or
otherwise damaged.
OO Stop using the product immediately if it emits smoke, a strange smell, or otherwise behaves abnormally.
OO Do not use organic solvents such as alcohol, benzine, or thinner to clean the equipment.
OO Do not let the product come into contact with water (e.g. sea water) or other liquids.
OO Do not allow liquids or foreign objects to enter the printer.
This could result in electrical shock or fire.
If liquid comes into contact with the product, unplug it from the outlet and consult your retailer or a Canon
Customer Support Help Desk.
Y
P
O
OO Do not touch this printer or the power plug during thunderstorms.
This could result in electrical shock or fire. Immediately stop using the equipment and distance yourself from it.
C
OO Unplug the power cord periodically and wipe away any dust and dirt that has collected on the
plug, the exterior of the power outlet, and the surrounding area with a dry cloth.
OO Do not handle the power cord with wet hands.
OO Do not use the equipment in a manner that exceeds the rated capacity of the electrical outlet or
wiring accessories. Do not use if the power cord or plug are damaged, or not fully plugged into
the outlet.
OO Do not allow dirt or metal objects (such as pins or keys) to contact the terminals or plug.
OO Do not cut, damage, alter or place heavy items on the power cord.
This could result in electrical shock or fire.
OO Do not play the supplied CD-ROM(s) in any CD player that does not support data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the speakers. It is also possible to
suffer hearing loss from listening with headphones to the loud sounds of a CD-ROM played on a music CD player.
Caution
Denotes the possibility of injury.
OO Do not stick any part of your hand into the printer interior.
OO Be sure to place SELPHY safely so as to avoid tripping over the power cord.
This could lead to injury or damage the printer.
OO Avoid using, placing or storing the printer in the following places.
Places subject to strong sunlight.
Places subject to temperatures above 40 °C (104 °F).
Humid or dusty areas.
Places subject to strong vibrations.
This may heat up and damage the printer or adapter and could result in electric shock, burn, injury, or a fire.
High temperature may cause deformation of the adapter or printer casing.
●
●
4
●
●
Caution
Denotes the possibility of damage to the equipment.
OO Unplug the product from the power outlet when you are not using it.
OO Do not place anything, such as cloth, on top of the printer while in use.
Leaving the unit plugged in for a long period of time may cause it to overheat and become distorted, resulting
in fire.
OO Never reuse paper for printing, even if an image is only printed on part of the paper, and there is
leftover blank space as shown.
Reusing paper to print can cause the ink sheet to become stuck to the paper or cause paper jams and
damage the printer.
OO Do not disconnect the power plug while printing.
If you have accidentally turned off the power, turn it on again and wait for the paper to be ejected. Consult
your retailer or a Canon Customer Support Help Desk in the event of a paper jam. Do not remove jammed
paper by force. This may damage the printer.
OO Do not use the printer near a device that creates a magnetic field such as a motor, or in a dusty
place.
This may cause the printer to malfunction.
C
Y
P
O
Setting Up SELPHY
More than the
length of the
paper
10 cm
(4 in.) or
more
OO Place SELPHY on a stable and even surface, such as a
table. Never place it on an unstable or tilted surface.
OO Keep SELPHY at least 1 m (3 ft.) from devices emitting
electromagnetic waves or strong magnetic fields.
OO Make sure there is at least 10 cm (4 in.) of free space
around SELPHY.
OO Since paper will pass in and out of SELPHY during
printing, make sure the space behind the printer is
greater than the length of the paper.
10 cm
(4 in.) or
more
OO Do not use SELPHY near a device that creates a magnetic field such as a motor, or in a dusty
place. This may cause the printer to malfunction.
OO Do not place near a television or radio. This may cause the printer to malfunction.
5
Component Guide
Card Slots (p. ‌12)
Paper Cassette Compartment
(p. ‌10)
Ink Cassette Lock (p. ‌14)
Paper Cassette Compartment
Cover (p. ‌10)
Ink Cassette Compartment
Cover (p. ‌10)
USB Terminal for Computer (p. ‌29)
USB Terminal for Digital
Camera/USB Flash Memory
Connection (pp. ‌15, ‌32)
Ink Cassette Compartment (p. ‌10)
Air Vent (p. ‌39)
DC IN (Power Input) Terminal (p. ‌10)
Paper Ejection Slot
Security Slot*
* Security cables, such as a Kensington lock, can be attached to this slot.
Controls
C
Icons Used in
This Guide
Name
Function
—
Screen (LCD Monitor)
q
Power Button
Turns SELPHY on or off (p. ‌11).
k
MENU Button
Displays the menu screen (p. ‌11).
—
EDIT Button
Displays the edit menu and rotates the cropping frame.
OK Button
Sets the selected item.
o
6
Y
P
O
u
Up/+ COPIES Button
d
Down/– COPIES Button
Displays images, settings screens, or error messages (p. ‌36).
Specifies number of copies, selects items to set.
l
Left Button
r
Right Button
-
Enlarge Button
Switches the display, enlarges the cropping frame.
0
Reduce Button
Switches the display, reduces the cropping frame.
v
BACK Button
Restores the previous screen (p. ‌21), cancels printing (p. ‌14).
p
PRINT Button
Starts printing (p. ‌14).
Switches images, changes settings.
Information Displayed on the Screen
File Number
Shooting date of the displayed image
Paper orientation
Memory card slot (p. ‌12)
currently in use (An SD card
is used in this example)
Print size
(Postcard size in this example)
Print settings (pp. ‌22 – ‌25)
(Settings that are not available are
dimmed)
Number of copies for the displayed image
Number of copies
Switching the screen display
You can display the full image screen or divide the display into 4 panes by pressing the -0 buttons. If you
are displaying the full image screen, the frame to indicate the print range is also displayed.
Getting Started
Y
P
O
Preparations for printing images. A Postcard size (4 x 6 in.) Color Ink Cassette/Paper Set (sold separately)
(p. ‌2) will be used as an example; however, preparation is the same for other sizes.
Take care not to get any dust on the paper since it may cause lines on the printed photos or a malfunction
(p. ‌5).
C
Preparing the Ink Cassette
Check the ink cassette and ink sheet
Ink sheet
OO Hold the ink cassette without touching the ink sheet
and check if the size of the paper you are going to
print matches the paper size shown on the ink cassette
(Postcard(4x6in)Size, Card Size, etc.).
OO Check that the ink sheet is taut with no slack. If the
ink sheet is slack, turn the sprocket as shown in the
illustration to tighten it, otherwise the ink sheet may be
torn when it is inserted into SELPHY.
OO Take care not to touch the ink sheet, not to handle the ink cassette with wet hands, and not to
get any dust or dirt in the ink sheet. Dirt and water drops may cause lines on photos, poor print
quality, a tear in the ink sheet, or cause the printer to malfunction (p. ‌5).
OO When tightening, turn the sprocket gently without force. Forcing it may cause a tear in the ink
sheet or the ink sheet will run out before completing a photo print, resulting in leftover paper.
7
Preparing the Paper Cassette
1
Check the paper size.
2
Open the lid.
3
Set the paper.
OO Check that the prepared ink cassette and the size shown
on the paper cassette (POSTCARD (4x6in), CARD SIZE,
etc.) match.
OO There are two layers of lids. Open the outer lid
then open the inner lid .
Glossy side
first,
OO Set the paper into the paper cassette that you prepared.
OO You can place up to 18 sheets in the paper cassette.
Inserting 19 or more sheets may damage the printer or
cause malfunction.
OO Hold the paper as shown in the illustration and load with
the glossy side up. (Do not touch the print side (glossy
side) of the paper with your fingers. This may prevent
you from making clean prints.)
OO If a protective sheet is included with the paper, remove it
and set only the paper into the cassette.
Y
P
O
OO When making Postcard size prints that have an area for
pasting a stamp, insert the cards so that the stamp area
is faced as shown in the illustration.
4
C
Close the lid.
OO Close the inner lid until it clicks into place. Leave the
outer lid open during printing.
Printing with L Size
OO You can print in L size using PCPL-CP400 (sold
separately). You can also print in Postcard size by
removing the adapter as shown in the illustration.
8
OO Use only dedicated paper included in the genuine Canon brand Color Ink Cassette/Paper Sets
for use in SELPHY CP series printers. Regular printing paper, regular postcards, or dedicated
paper for SELPHY ES series printers cannot be used.
OO Never do the following, as it may result in failure or cause the printer to malfunction:
-- reverse the paper (the glossy side is the print side)
-- bend or separate the paper at the perforations before printing
-- use label sheets that have begun to peel or label sheets with
portions peeled
-- write on a sheet before printing
-- reuse paper for printing on the blank part (p. ‌5)
-- reuse a spent ink cassette
OO Do not touch the springs on the paper cassette.
If the springs are bent or deformed, paper will not feed correctly
into SELPHY.
OO One spring is attached at the center of the top surface on card
sized paper cassettes.
OO Take case not to touch or rub the print (the glossy) side of the
paper, not to handle the paper with wet hands, and not to get any
dust or dirt on the paper. Dirt and water drops may cause lines on
photos, poor print quality, or cause the printer to malfunction (p. ‌5).
Spring
Attaching the Dust Protection Cover
By attaching the dust protection cover DPC-CP100, you can prevent dust or dirt from accumulating on the
paper. The dust protection cover may not be included in some regions. Purchase separately if required.
Y
P
O
OO Insert the dust protection cover as shown in the
illustration.
C
OO In a place with a lot of dust or dirt, or outdoors, the dust protection cover may not be able to
prevent dust or dirt from accumulating on the paper, so take care to select a clean environment
when using SELPHY.
OO Store the dust protection cover in a bag to prevent dust from collecting when not using.
9
Inserting the Ink and Paper Cassettes
1
Open the covers.
2
Insert the ink cassette.
3
Insert the paper cassette.
Connecting the Power
1
2
10
OO Open the covers for the ink cassette and paper cassette
compartments.
OO Insert the ink cassette into the printer in the direction
indicated by the arrow on the cassette until it clicks and
locks into place.
OO Close the ink cassette compartment cover.
OO Make sure that the outer lid is open (p. ‌8) and insert the
paper cassette all the way into the compartment.
C
Y
P
O
Plug the adapter cord into SELPHY.
OO Fully insert the adapter plug into SELPHY.
Connect the power cord.
OO Connect the power cord to the compact power adapter,
then plug the other end into a power outlet.
Setting the Display Language
You can change the language displayed in the LCD monitor menus and messages. The default setting is English.
1
Turn on SELPHY.
2
Raise the screen (LCD monitor).
OO Press and hold the q button until the screen shown at
left displays.
OO To turn the power off, press and hold the q button and
release when the screen display changes.
OO Do not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Approx. 45°
3
Display the settings screen.
OO PPress the k button.
OO PPress the ud buttons to select [Change Settings], and
then press the o button.
C
Y
P
O
4
Display the language settings screen.
5
Select a language.
OO Press the ud buttons to select a [
then press the o button.
Language], and
OO Press the udlr buttons to select a language, then
press the o button.
OO You can go back to Step 2 if you press the v button
twice.
11
Compatible Memory Cards and Memory Card Slots
Card Slots
Memory Cards That Can be Used
Without an Adapter
OO SD Memory Card
OO SDHC Memory Card
OO SDXC Memory Card
SD/MMC +
OO MultiMediaCard
OO MMCplus Card
OO HC MMCplus Card
Memory Cards That Require an Adapter
(commercially available)
OO miniSD Memory Card
OO miniSDHC Memory Card
OO microSD Memory Card
OO microSDHC Memory Card
OO microSDXC Memory Card
OO RS-MMC Card *1
OO MMCmobile Card
OO MMCmicro Card
OO xD-Picture Card *2
OO CF Card
OO Microdrive
CF/microdrive
Y
P
O
*1 “RS-MMC” is an abbreviation of “Reduced-Size Multi Media Card”.
*2 Operations were confirmed with the adapter DPC-CF manufactured by Fujifilm Corporation.
OO For memory cards that require an adapter, be sure to first insert the memory card into the adapter
before inserting into the appropriate card slot.
If you insert the memory card into a card slot without using an adapter, you may not be able to
remove the memory card from the printer.
OO Use a memory card formatted in the device used for taking the images. A memory card formatted
on a computer may not be recognized.
C
OO Refer to the user guide included with your memory card and adapter for handling instructions.
About USB Flash Memory
You can print images on a commercially available USB flash memory by connecting it to SELPHY (p. ‌15).
Images That Can Be Printed
JPEG images conforming to the Exif standard can be printed with SELPHY.
OO Irregularly sized images, or images that have been edited on a computer may not display or print properly.
12
Selecting and Printing Images
You can select an image and specify the number of copies for printing. In this section, an SD memory card
will be used as an example, but you can print from other memory cards using the same steps.
1
Turn on SELPHY.
2
Raise the screen (LCD monitor).
OO Press and hold the q button until the screen shown at
left displays.
OO To turn the power off, press and hold the q button and
release when the screen display changes.
OO Do not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Approx. 45°
Insert a single memory card into the slot.
3
Label side
4
Y
P
O
OO Insert the card faced as shown in the illustration until it
clicks.
OO To remove the card, push it in until it clicks and release
your finger slowly.
OO If you are using a CF/microdrive card, insert it fully into
the appropriate slot.
XX The screen in Step 4 below (image display screen)
(p. ‌7) will display.
C
Select an image.
OO Press the lr buttons to select an image to print.
OO Every 5th image will be displayed if you press and hold
the lr buttons.
Select the number of copies.
5
Number of copies for the
displayed image
Number of copies
OO Press the ud buttons to select the number of copies.
OO If you press and hold one of the ud buttons, the
number increases or decreases by 5 copies.
OO To print another image at the same time, repeat Steps 4
and 5.
13
6
Print.
7
Insert the paper.
8
Change the ink cassette.
OO Press the p button to start printing.
OO During printing, the paper will pass in and out from the
back of SELPHY several times. Do not touch the paper
until printing has finished and the printed sheets collect
on the print output tray (on the outer lid of the paper
cassette).
OO Do not let 19 or more printed sheets collect on the print
output tray.
OO During printing, always press the v button to cancel
printing.
OO If the paper out message is displayed on the screen, pull
the paper cassette out from SELPHY without turning off
the power.
OO Refill the paper cassette with new paper (p. ‌8), and
reinsert the cassette into SELPHY (p. ‌10).
OO If the ink out message is displayed on the screen, open
the ink cover without turning off the power.
OO The ink cassette will come out if you move the lock in
the direction shown in the illustration. Insert a new ink
cassette (pp. ‌7, ‌10).
C
Y
P
O
OO Never pull out the paper cassette, open the ink cassette compartment cover, or remove the
memory card while you can hear the printer’s operation sounds immediately after turning on the
printer, or during printing. This may cause the printer to malfunction.
OO Press the v button to cancel printing. You cannot cancel printing by pressing the power button
and the printer could be damaged if you unplug it to disconnect power.
OO It may take some time before images are displayed on the screen in Step 4 if the memory card contains a large
number of images.
OO If the [Start DPOF printing] screen displays, refer to “Printing Images Using Digital Camera Specified Settings
(DPOF Print)” (p. ‌33).
OO You can print up to 99 images at once and specify up to 99 copies per image in Steps 4 and 5. However, you
cannot specify more than 999 images (p. ‌35).
Avoiding Incomplete Photos
Note the following to avoid wasted remaining paper due to the ink sheet running out before completing a
photo print.
OO Do not turn the sprocket too much when tightening the ink sheet (p. ‌7).
OO Always press the v button when you want to cancel printing and never turn off the power before pressing
the v button (Step 6).
OO If the paper out message is displayed on the screen, refill the paper without turning off the power (Step 7)
or press the v button to cancel printing (Step 6).
Depending on print conditions, you may not be able to avoid incomplete photo prints due to the ink sheet
running out in some cases even if you follow the above instructions.
14
Printing From USB Flash Memory
Just like images on memory cards, images on commercially available USB flash memory can also be printed.
Insert a USB flash memory.
OO Insert a USB flash memory as shown.
OO All further steps are the same as those used for printing
images from memory cards (pp. ‌13 – ‌14).
OO Depending on the brand of USB flash memory used, it may be difficult to insert or remove, and it may not
operate properly.
OO Refer to the user guide included with your USB flash memory for operating instructions.
Printing 1 Copy of the Selected Image
You can print 1 copy of the selected image with simple operation.
Selecting and Printing an Image.
Y
P
O
OO Select the image as described in Steps 1 to 4 on p. ‌13.
OO Press the p button to print 1 copy of the selected
image.
C
OO If you have specified the image and the number of copies in Steps 4 to 5 on p. ‌13, SELPHY
will print as specified even if you carry out the above operations. Therefore, make sure that the
number of copies is “0” in Step 4 on p. ‌13 before trying this operation.
15
Printing All Images
You can print all images on a memory card at once.
1
Display the menu.
2
Display the settings screen.
3
Select the number of copies.
OO Press the k button.
OO Press the ud buttons to select [Print All Images], then
press the o button.
Y
P
O
OO Press the ud buttons to set the number of copies.
C
Number of Number of copies
images contained
Number of
in the card
sheets required
4
Print.
OO Press the p button to start printing.
OO To cancel printing, press the v button.
OO If there are more than 1000 images on the card, only 999 copies will be printed in order of the most recent by
shooting date.
OO You can specify up to 99 copies in Step 3. However, you cannot specify a value if the number of images in the
card multiplied by the value exceeds 999.
(For example, if the card contains 100 images, you can specify up to 9 copies.)
16
Storing the Printed Photos
OO When both edges of a print have perforations, you can remove the edges
by bending them.
OO Use an oil-based pen to write on prints.
OO To prevent discoloration, do not store prints in places subject to temperatures
of over 40 °C (104 °F), humid or dusty places, or in direct sunlight.
OO Avoid the following actions as they may result in color change, color fading
or color bleeding: Sticking any type of adhesive tape on a print surface,
allowing print surfaces to come into contact with vinyl or plastic, applying
alcohol or other volatile solvents to a print surface, or leaving the print surface tightly pressed against
other surfaces or objects for prolonged periods.
OO If you wish to mount prints in an album, select an album with photo covers made of nylon, polypropylene
or cellophane.
OO Color may change over time or depending on storage conditions. Canon assumes no liability for
color changes.
Cleaning Up After Printing
Turn off SELPHY (p. ‌11), then remove the memory card or USB flash memory.
Lower the screen (LCD monitor) flat for storage.
Unplug the power cord from the power outlet and disconnect the adapter plug from SELPHY.
OO If the compact power adapter is hot, wait until it has cooled down before you store it.
Remove the paper cassette and close the paper cassette compartment cover. Keep the remaining paper
inside the cassette and store the cassette in a dark, cool, and dry place free from dust.
OO Keep the ink cassette inside SELPHY.
OO Store SELPHY horizontally, in a dark place free from dust. Dust and dirt may cause white lines on
photos or cause the printer to malfunction.
C
Y
P
O
OO When you have more than one ink cassette, keep one inside SELPHY, and keep the other inside
the original packaging or a bag to protect it from dust, and store it in a dark place.
OO When storing new paper and ink cassettes, leave them in unopened packages, and keep them in
a dark place.
Maintaining the Printer
To prevent dust and dirt from causing lines on photos and to ensure the print quality, clean SELPHY regularly
using the supplied cleaner unit (p. ‌2) before printing and when changing the ink cassette. Note that the
cleaning unit may not be included in some regions.
Cleaning SELPHY.
OO Remove the ink cassette if it is inserted.
OO Insert the cleaner unit with the arrow side up as shown
fully and then pull out. Repeat this several times.
OO Store the cleaner unit in a bag to prevent dust after
cleaning.
OO Do not touch the white part of the cleaner unit as it will not clean as effectively.
OO Do not use any cleaning kits other than the supplied cleaner unit. Doing so may cause the printer
to malfunction.
OO If lines still appear on photos after cleaning, contact a Canon Customer Support Help Desk.
17
Cropping and Printing Images
You can crop and print part of an image.
1
Display the cropping screen.
OO Select an image as described in Step 4 on p. ‌13, press
the EDIT button, and then press the o button.
XX A cropping frame to indicate the range will be displayed.
2
Determine the range.
3
Make the setting.
4
OO The cropping frame switches between portrait and
landscape each time you press the EDIT button.
OO You can move the cropping frame by pressing the
udlr buttons.
OO You can enlarge the cropping frame by pressing the button and shrink it by pressing the 0 button.
Y
P
O
OO Press the o button to set the cropping range and
return to the image display screen.
XX
is displayed at the bottom left of the screen.
OO The cropping range setting is not cleared by setting the
number of copies to 0.
OO To crop another image and print at the same time, repeat
Steps 1 to 3.
C
Print the images.
OO Print as described in Step 6 on p. ‌14.
OO If you want to change the cropping range after setting it, press the EDIT button in the image display screen, press
the ud buttons to select [Adjust Cropping], and press the o button to repeat Steps 2 to 3.
OO If you want to cancel the cropping range after setting it, press the EDIT button in the image display screen, press
the ud buttons to select [Reset Cropping], press the o button to display the reset cropping screen, and then
press the o button again.
OO The cropping ranges are all cleared if you turn SELPHY off or remove the memory card before printing them.
OO You can set up to 99 images with cropping ranges.
OO You cannot crop images in [DPOF Print] and [Print All Images].
Index] or [
Shuffle] in [Page Layout] (p. ‌23).
OO You cannot crop images when you have selected [
OO You cannot change the vertical and horizontal ratio of the cropping frame on the screen.
OO You can change the number of copies by pressing the ud buttons in the image display screen in Step 3.
OO The cropping range is cleared when printing is finished.
18
Printing ID Photos
You can print your image as an ID photo. You can
select the size from [Multi-size], [Standard]*, and
[Custom].
Also, you can select 2 types of images to be printed
on one sheet.
* The Standard size conforms to the ICAO international
standards.
1
Set to print ID photos.
2
Specify the ID photo size.
3
Select and print the images.
OO Press the k button.
OO Press the ud buttons to select [ID Photo], and then
press the o button.
OO Press the lr buttons to select the size, and then press
the o button.
OO If you have selected [Custom], press the ud buttons to
select [Long Side], press the lr buttons to specify the
length, then specify the length for [Short Side], and then
press o again. The values which can be specified in
[Short Side] change automatically according to the value
you have specified in [Long Side].
OO If you have selected [Multi-size], the size of the image to
be printed is displayed.
C
Y
P
O
OO Select the image by pressing the lr buttons, and press
the u button.
is displayed at the bottom right of the
screen (up to 2 images).
OO Press the EDIT button to set the cropping range (p. ‌18).
OO Print as described in Step 6 on p. ‌14.
OO The ID photo may not be accepted officially, depending on the institution the ID photo is required for. Please
contact the appropriate institution for regulation details.
OO You cannot use card size paper.
OO [Borders] settings will be ignored.
OO Settings are cleared when printing is finished.
OO The date and file number will not be printed.
OO If you have selected 2 types of images, these 2 types are printed in equal numbers for the number of columns in
the layout.
OO If you have selected 2 types of images and the number of columns is an odd number, nothing will be printed in
the center column.
19
Crop the image for the passport.
OO If you display the cropping range (p. ‌18) while the
[Standard] size is selected for [ID Photo], 2 lines are
displayed.
OO Adjust so that one line is at the top of the head and the
other line is under the chin to print a passport photo
conforming to the passport standards.
OO Please contact the appropriate institution for regulation details other than regarding position and size of the face.
C
20
Y
P
O
Printing a Variety of Images
You can use various printing features, such as imprinting the shooting date or adjusting the color of an image.
You do not need to make settings for each image because once the settings are made, they are applied for
all images.
Making Settings
1
Display the settings screen.
2
Select the item and change the settings.
OO Press the k button.
OO Press the ud buttons to select [Change Settings], and
then press the o button.
C
3
Y
P
O
OO Press the ud buttons to select an item.
OO Press the lr buttons to change the settings, then press
the v button to complete the setting.
OO Pressing the v button again will restore the image
display screen.
OO Refer to pp. ‌22 – ‌25 for information about each setting.
Print.
OO Select an image for printing (p. ‌13) and the number of
copies (p. ‌13), then press the p button to print.
21
Printing With the Date (Date)
OO You can print the shooting date recorded by the
digital camera.
OO
Off (Default setting) /
On
02/02/2012
OO Turning off SELPHY will return the setting to [
Off].
OO Since the date printed will be the date the image was recorded by the digital camera, it cannot be changed on
SELPHY.
OO You can change the style of the printed date in [Date Format] (p. ‌25).
Index], or [
Shuffle] is selected in [Page Layout] (p. ‌23).
OO The date will not print if [
Off] for images that already have the date imprinted by the camera to prevent two dates being
OO Specify [
printed in the image.
Correcting Red Eyes and Printing (Correct Red-Eye)
OO Correct images with red-eye.
OO
Off (Default setting) /
On
OO Portions other than the eyes may be mistakenly corrected. Set [Correct Red-Eye] to [
only when printing images with red-eye.
Y
P
O
On]
OO If SELPHY is turned off or the memory card is removed, the setting will return to [
Off].
OO Red-eye may not be automatically detected or optimally corrected when faces appear extremely small, large,
dark or bright in relation to the overall image, with faces turned to the side or diagonally, or faces with a portion
hidden.
2-up], [
4-up], [
8-up], or [
Index] in [Page
OO You cannot correct red-eye when you have selected [
Layout] (p. ‌23).
Sepia] or [
B/W] in [My Colors] (p. ‌24).
OO Red-eye correction is not applied when you have selected [
OO The level of correction may change depending on the cropping range setting, page layout, and paper size.
C
Printing With or Without a Border (Borders)
OO You can set images to print with or without a
border.
OO
Borderless (Default setting) /
Bordered
OO Turning off SELPHY will return the setting to [
Borderless].
Index], or [
Shuffle] in [Page Layout] (p. ‌23).
OO Images are printed without borders if you select [
8-up] in [Page Layout] (p. ‌23) when printing on card sized paper (p. ‌2), images will be printed
OO If you select [
Bordered] is selected.
without borders, even if [
22
Selecting a Layout and Printing (Page Layout)
OO You can set the number of images that you want
to print on one sheet. The number of images that
you specified (p. ‌13) will be printed in the selected
layout.
1-up
(Default setting)
Prints one image using a full sheet
8-up*
Prints eight images on one sheet
2-up
Prints two images on one sheet
Index
Prints as an index
4-up
Prints four images on one sheet
Shuffle
Automatically arranges images in
a variety of sizes for printing on a
single sheet
* Set the layout to [
8-up] when using Color Ink Cassette/Label Set KC-18IL (8-label sheet) (p. ‌2).
OO If SELPHY is turned off, the setting will return to [
1-up].
OO You can retain a layout even after SELPHY is turned off. To have SELPHY retain layouts, first make sure
SELPHY is turned off, press and hold the k button, u button, and p button, and then press and hold the
q button until “SELPHY” is displayed on the screen. If you want SELPHY to no longer retain layouts, turn off
SELPHY and then turn it on in the same way as you did before for retaining layouts.
OO The image position cannot be specified.
OO Depending on the selected layout, the settings made in [Date] (p. ‌22), [Image Optimize] (p. ‌24), [Correct RedEye] (p. ‌22), [Borders] (p. ‌22), [Smooth Skin] (p. ‌24), or [Brightness] (p. ‌25) may not be applied.
Index], you can print all images on a memory card as an index
OO If you select [Print All Images] (p. ‌16) in [
print.
Y
P
O
Arranging Images of Different Sizes (Shuffle)
C
OO Shuffle automatically arranges images in a variety
of sizes for printing.
OO A group of up to 8 images, or a group of up to 20
images can be printed on a single sheet.
OO Prints can be made on L size or Postcard size
paper (p. ‌2).
OO In “Making Settings” (p. ‌21), press the ud buttons
to select [Page Layout] in the screen in Step 2.
Press the lr buttons to select [
Shuffle], then
press the o button.
OO When the screen shown on the left appears, press
the ud buttons to select an option.
OO Press the lr buttons to change the settings, then
press the v button to complete the setting.
OO Pressing the v button twice will restore the image
display screen.
OO You cannot specify the position of the images.
OO It may take some time before printing starts.
23
Making Skin Look Smooth in Prints (Smooth Skin)
OO Makes skin look smooth and beautiful in prints.
OO
Off (Default setting) /
On
OO This setting is reset to [
Off] when printing finishes, SELPHY is turned off, or the memory card is removed.
OO Correction may be applied to areas other than skin, producing unexpected results.
Index], [Smooth Skin] will not be applied.
OO When [Page Layout] (p. ‌23) is set to [
Changing the Color Tone and Printing (My Colors)
OO You can adjust the colors in your images, or make your images sepia-toned or black and white.
Off
(Default setting)
—
PositiveFilm
Intense, natural colors like those
obtained with positive film
Vivid
Emphasizes the contrast and color
saturation for a vivid impression
Sepia
Changes the image to sepia tone
Neutral
Tones down the contrast and color
saturation for neutral hues
B/W
Black and white
OO Turning off SELPHY will return the setting to [
Off].
OO Depending on the settings made in My colors, [Correct Red-Eye] (p. ‌22) settings may not be applied.
Y
P
O
Getting the Best Results With Auto Correction (Image Optimize)
OO SELPHY will automatically correct the image to
achieve optimum image quality.
Off /
On (Default setting)
OO
C
OO Some images may not be adjusted correctly.
OO Turning off SELPHY will return the setting to [
On].
Index], [Image Optimize] will not be applied.
OO When [Page Layout] (p. ‌23) is set to [
OO The level of correction will change depending on the page layout and paper size.
24
Adjusting the Brightness (Brightness)
OO You can adjust the brightness of an image within
a range of ±3.
OO The larger the + value, the brighter the image
gets. The larger the - value, the darker the image
gets.
OO Turning off SELPHY will return the setting to [±0].
Index] is selected in [Page Layout] (p. ‌23).
OO [Brightness] will not be applied if [
Changing the Date Style (Date Format)
OO You can change the order of the printed date
(p. ‌22).
OO mm/dd/yyyy (Default Setting), dd/mm/yyyy,
yyyy/mm/dd
02/02/2012
2012/02/02
Y
P
O
OO The setting will be retained even if SELPHY is turned off or the memory card is removed from the slot.
Saving Energy (Auto Power Down)
C
OO SELPHY turns itself off automatically if it is not operated for approximately 5 minutes.
OO On (Default setting) / Off
OO If you print multiple images that include images SELPHY cannot print (p. ‌12), a message [Could not
print some images! Cancel printing?] is displayed and printing stops. If [Auto Power Down] is [On]
and SELPHY is not operated for approximately 5 minutes, SELPHY cancels printing and turns itself
off. If you turn SELPHY back on after the above sequence, a blank sheet may be output. Never
reuse ejected paper (p. ‌5).
Note that the battery is still consumed after printing stops until the Auto Power Down function takes
effect if you are using the battery (p. ‌34).
OO SELPHY is not turned off automatically when it is connected to a camera or a computer, or an error message is
displayed on the screen.
25
Printing From Your Computer
If you connect your computer to SELPHY and use the supplied software, you can view all images at once and
take advantage of various printing functions that cannot be done with just SELPHY alone.
Select favorite images from an index and print
OO You can select images you wish to print from an index, and print them all at
once. You can also add text to your images and print.
Print with decorations
OO You can add frames or stamps to your images and print. You can also add
text to your images and print.
Print calendars
OO You can add calendars to your prints. You can also add text to your images
and print.
Y
P
O
Arrangement printing
C
OO You can arrange multiple images on the same sheet.
ID photo printing
OO You can print in the size required for ID photos.
OO The ID photo may not be accepted officially, depending on the institution the ID photo is required
for. Please contact the appropriate institution for regulation details.
26
System Requirements
Windows
Macintosh
OS
Windows 7 Service Pack 1
Windows Vista Service Pack 2
Windows XP Service Pack 3
Configuration
The above OSs should be pre-installed on computers with built-in USB ports.
CPU
Pentium 1.3 GHz or higher
Mac OS X v10.7: Intel Core 2 Duo or higher
Mac OS X v10.6: Intel Processor
RAM
Windows 7 (64-bit): 2 GB or more
Windows 7 (32-bit),
Vista: 1 GB or more
Windows XP: 512 MB or more
1 GB or more
Interface
USB
Free
Hard Disk Space
120 MB or more*
140 MB or more
Display
1,024 x 768 pixels or more
1,024 x 768 pixels or more
Mac OS X v10.6 – v10.7
* For Windows, Microsoft .NET Framework 2.0 (max. 280 MB) or higher must be installed. Installation may take some
time depending on your computer’s capabilities.
C
Y
P
O
27
Installing and Starting the Software
Windows 7 and Mac OS X 10.7 are used for these explanations.
Items to Prepare
OO Computer
OO Supplied CD-ROM (SELPHY CP810 Solution Disk) (p. ‌2)
OO A commercially available USB cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Mini-B
connector)
1
Install the software.
Windows
OO Place the CD-ROM in the computer’s CD-ROM drive
and click [Easy Installation] when the screen on the left
appears.
OO Follow the on-screen instructions to proceed.
OO If the User Account Control window appears, follow the
on-screen instructions to proceed.
XX Proceed with the installation to display the screen on the
left.
C
Y
P
O
Macintosh
OO Insert the CD-ROM in the computer’s CD-ROM drive.
Click [Finder] in the Dock (the bar at the bottom of the
desktop) and double click [
] in the CD-ROM.
OO If
is displayed on the desktop, you can also doubleclick
to display files in the CD-ROM.
OO When the screen on the left appears, click [Install] and
follow the on-screen instructions to proceed.
OO When the installation finishes, click [Finish] to restart the
computer and complete the installation.
2
28
Prepare SELPHY.
OO Turn off SELPHY and remove the memory card or USB
flash memory.
OO Insert an ink cassette and a paper cassette that contains
paper you want to use into SELPHY (pp. ‌7 – ‌10).
Connect SELPHY to the computer.
3
OO Use the USB cable to connect SELPHY to the computer.
OO Refer to the user guides included with the cable and
computer for handling instructions.
Commercially available USB cable
4
Turn on SELPHY.
OO Press the q button to turn on SELPHY.
Windows
OO When the installation finishes, click [Restart] to restart
the computer and complete the installation.
Confirm that the software has been started
properly.
5
XX The software will start and the screen on the left will
appear when communication between SELPHY and the
computer is established.
OO Perform Steps 2 to 4 to automatically start the software
the next time.
Windows
Y
P
O
OO If the screen in Step 5 does not appear, open it from the [Start] menu r [All Programs] r
[Canon Utilities] r [SELPHY Photo Print] r [SELPHY Photo Print].
Macintosh
C
OO If the screen in Step 5 does not appear, follow the procedure below to register your printer.
Select [ ] from the menu, and click [System Preferences] r [Print & Fax] to open the Print
& Fax screen. Click [+] to select [CP810] from the pop-up window, then click [Add].
After you have finished registering your printer, click the [SELPHY Photo Print] icon from the
Dock (the bar at the bottom of the desktop) to display the screen for Step 5.
OO SELPHY may not operate correctly if it is connected to a computer via a USB hub.
OO SELPHY may not function properly if other USB devices (with the exception of a USB mouse
or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
OO Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to
the computer’s USB port. If you accidentally do so, awaken the computer from standby mode
without disconnecting the USB cable. When you cannot awaken the computer properly, restart
the computer.
OO For details on handling the computer, refer to the user guide included with your computer.
29
Printing Images with the Software
You can print images saved on the computer using the installed software (SELPHY Photo Print).
The [Simple print] feature will be explained in this section. Using this feature, you can view all your images at
once and select which ones you want to print.
1
Display the print menu.
2
Select a print method.
3
Select one or more images.
OO Click [Print menu].
OO If printing preparations are not complete (paper cassette
and ink cassette inserted), you cannot click [Print
menu]. Follow the on-screen instructions to perform the
necessary operations.
OO Click [Simple print].
OO You can make prints with frames, stamps, and speech
bubbles by clicking [Decoration print].
OO You can make prints with calendars added by clicking
[Calendar print].
OO You can print multiple images on the same sheet by
clicking [Layout Print].
OO You can print in the size required for ID photos by
clicking [ID Photo Print].
You can select the criteria for
images to display.
Y
P
O
XX Images will display in an index within the [Pictures]
folder.
OO Click an image to select for printing.
XX The background color changes and the
image is set for printing.
OO Use the same procedure to click all images
you want to print.
OO If you click an image again, the background
color switches back to the original color
and the settings are canceled.
OO Once images are selected, click [Next].
C
You can display images saved in another folder by pressing
this button and selecting a folder from the screen that
appears.
30
Select the number of prints.
4
OO Select the number of copies for each image.
OO For Windows, click [Print] to start printing.
OO For Macintosh, click [Print menu], then click [Print] in the
screen that appears.
Press the - or + button to set the
number of copies.
5
End the program.
Windows
OO When all printing is finished, click
corner of the screen.
at the top right
Macintosh
Y
P
O
OO When all printing is finished, click
of the screen.
at the top left corner
OO The layout image shown in the right side of the screen that is displayed when you click [ID Photo Print] in Step 2
on p. ‌30 differs from the actual layout. You can check the actual layout by clicking [Preview] in the [4.Print]
screen.
OO If you select an index layout in the screen that is displayed when you click [Layout Print] in Step 2 on p. ‌30, then
you cannot adjust the image, such as changing the size or orientation of the image in the [4.Print] screen.
C
31
Printing From Your Digital Camera
You can select and print images from a digital camera that supports the PictBridge standard.
A Canon brand compact digital camera will be used as an example to explain the print method. If operations
are different for the digital camera you use, refer to the user guide included with your digital camera.
1
Make sure that a memory card is not inserted
in SELPHY, and it is not connected to a
computer.
2
Connect SELPHY to the digital camera using
the interface cable (USB cable) included with
the digital camera.
3
First turn on SELPHY, then turn on the digital
camera and play back the images on the
digital camera.
Y
P
O
XX Depending on the digital camera you use,
on the digital camera’s screen.
4
may appear
Perform the necessary operations on your
digital camera to select an image for printing.
OO Use the digital camera to start printing.
XX Printing starts.
OO After printing has completed, turn off SELPHY and the
digital camera, then unplug the cable.
C
OO You cannot stop printing with the v button. Use the digital camera to stop printing.
OO PictBridge is an industry standard established by the Camera & Imaging Products Association (CIPA). It allows
you to print images taken with any digital camera or video camera, regardless of the manufacturer or model, by
connecting to a printer without using a computer.
32
Printing Images Using Digital Camera
Specified Settings (DPOF Print)
You can make print settings and select images to print on your digital camera and then print the images all at
once. For details, refer to the user guide included with your digital camera.
Insert a memory card containing DPOF
settings into the appropriate memory card slot.
1
XX [DPOF images remain Print images?] appears on the
screen.
Label side
2
3
Y
P
O
Press the o button.
C
Check the settings.
Settings with the digital camera
: Date
: File number
: Index (Print Type)
: Standard (Print Type)
Number of sheets required
4
Print the images.
OO Press the p button to start printing.
OO The date and file number are the DPOF settings made with the digital camera (these settings cannot be changed
with SELPHY).
OO If, on a Canon brand digital camera, the [Print Type] is set to [Standard], the settings made in “Printing a Variety
of Images” (pp. ‌21 – ‌25) will be applied. ‌
OO The screen in Step 3 can also be displayed when you press the k button and select [DPOF Print], then press
the o button. [DPOF Print] only displays when a memory card is inserted that contains DPOF information set
with the digital camera.
33
Printing When a Power Outlet is not Available
You can use the battery pack NB-CP2L (sold separately) and charger adapter CG-CP200 (sold separately)
to print images where there is no power outlet. You can print approximately 36 sheets* of postcard size paper
with a fully charged battery.
* The number of sheets is determined under Canon testing standards and may change depending on the
printing conditions.
Installing the Battery
1
Remove the battery terminal cover.
2
Attach the battery to the charger adapter.
3
Connect the charger adapter to SELPHY.
OO First insert in the direction indicated by , and then in
the direction indicated by
until it clicks and locks into
place.
Charging the Battery
C
Y
P
O
Connect the power cord to the charger adapter
with the attached battery.
XX The battery charge starts and the orange lamp will be lit.
XX The battery charge will complete after approximately 4
hours and the green lamp will be lit.
OO The charge will continue even if you turn SELPHY on
while the charger adapter is connected to it. However,
the charge stops while printing.
OO For cautions concerning the battery, refer to the user guide included with the battery.
OO Keep SELPHY on a stable surface such as a desk while it is connected to the charger adapter and take care not
to unplug the charger adapter cable.
34
Troubleshooting
If you think there is a problem with SELPHY, first, check the following. If the items below do not solve your
problem, contact a Canon Customer Support Help Desk as listed on the included customer support list.
Power
OO Power will not turn on
• Make sure the plug is correctly connected (p. ‌10).
• Hold the q button pressed until the start-up image appears on the screen (p. ‌11).
• If you are using the battery pack NB-CP2L (sold separately) and charger adapter CG-CP200 (sold
separately), check if the battery is charged, attached correctly, and the cable is connected properly.
Printing Problems
OO Cannot print
• Make sure SELPHY is turned on (p. ‌11).
• Make sure that the ink and paper cassettes are correctly inserted (p. ‌10).
• Make sure there is no slack in the ink sheet (p. ‌7).
• Make sure that you are using dedicated paper (p. ‌9).
• When the ink is spent, replace the ink cassette with a new one. When the paper is spent, refill the paper
cassette with new paper (p. ‌14).
• Make sure you are using the correct combination of paper, paper cassette and ink cassette (p. ‌7).
• Connect SELPHY to only one device at a time. If SELPHY is connected simultaneously to a digital
camera, computer and has a memory card inserted, you may not be able to print properly.
• Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not
a malfunction. Wait until the temperature drops and printing resumes.
Y
P
O
Cannot display/print images from memory card or USB flash memory
• Make sure the memory card is inserted all the way into the correct slot with the label facing upward
(pp. ‌12, ‌13).
• Make sure the USB flash memory is inserted all the way in the correct slot faced correctly (p. ‌15).
• Make sure you are using a supported image type (p. ‌12).
• Make sure that any memory card requiring an adapter is inserted into the adapter before being inserted
into the slot (p. ‌12).
C
Cannot print from a digital camera
• Make sure your digital camera supports PictBridge (p. ‌32).
• Make sure SELPHY and the digital camera are connected correctly (p. ‌32).
• Make sure the rechargeable battery/disposable batteries in your digital camera are not depleted. If there
is insufficient charge, replace the battery with a fully charged one, or new batteries.
Cannot print from a computer
• Make sure you installed the software according to the correct procedure (p. ‌28).
• Make sure SELPHY is connected directly to a port on the computer with the USB cable (p. ‌29).
• Problems Exclusive to Windows: Make sure the printer is not set to offline.
If it is, right-click the printer icon and cancel the offline setting.
• Problems Exclusive to Macintosh: Make sure SELPHY is registered on the Printer List (p. ‌29).
35
OO Cannot print the date
Cannot print from memory cards or USB flash memory
• Make sure the date imprint option is set (p. ‌33).
If you are using DPOF printing, the date imprint settings are configured on the digital camera used for the
DPOF settings.
Cannot print from digital cameras
• Make sure the date setting in your digital camera is set to [On]. However, if the setting is [Default], the
date imprint settings on SELPHY will be used.
OO Cannot make clean prints
• Make sure the ink sheet and paper are not dusty.
• Make sure there is no dust on the inside surfaces of SELPHY (p. ‌39).
• Make sure no condensation has formed on the inside surfaces of SELPHY (p. ‌39).
• Make sure SELPHY is not placed near a device emitting electromagnetic waves or a strong magnetic
field (p. ‌5).
OO Colors on the computer display and the print are different
• Color generation methods are different with computer screens and printers. Moreover, variance may be
attributable to the environment in which the screen is viewed (color and strength of the light), or to the
screen’s color adjustment settings.
OO After using the computer to cancel a print in progress, an image that had already been printed was
printed again when printing resumed
• When you restart printing on a Macintosh computer after canceling, an already printed image may print
again when printing resumes.
Paper Problems
Y
P
O
OO Paper will not fit into cassette
• Make sure the paper size matches the size of the paper cassette (p. ‌2).
OO Paper is not feeding properly/frequent paper jams
• Make sure the paper and paper cassette are correctly inserted (pp. ‌8, ‌10).
• Make sure there are less than 19 sheets in the cassette.
• Make sure 19 or more sheets have not collected on the outer lid of the paper cassette.
• Make sure that you are using dedicated paper (p. ‌9).
C
OO Cannot print the specified number of prints/paper left over
• Paper may be left over if the ink runs out first (p. ‌14).
OO Paper is jammed
• If the paper is sticking out from the front or back (paper ejection slot) (p. ‌6) of SELPHY, gently tug on
the paper to remove it. However, if a gentle tug is not sufficient to remove the paper, do not attempt to
forcibly pull it out. Turn the printer off and on repeatedly until the paper is ejected. If you have accidentally
turned off the power while printing, turn it on again and wait for the paper to be ejected. Consult your
retailer or a Canon Customer Support Help Desk in the event of a paper jam. Do not remove jammed
paper by force. The printer could be damaged.
Error Messages
If a problem occurs with SELPHY, a message appears on the screen. If a possible solution displays with the
error message, follow the on-screen instructions. If no solution displays, refer to “Troubleshooting” (p. ‌35).
If these items do not solve your problem, contact a Canon Customer Support Help Desk as listed on the
customer support list.
OO If a problem occurs while SELPHY is connected to a digital camera, an error message may appear for you to
check on the screen of the digital camera.
36
Specifications
SELPHY CP810
Printing Method
Dye-sublimation thermal transfer (with overcoating)
Resolution/Color Representation
Gradation
Ink
300 x 300 dpi
256 shades per color
(Resolution based on the “area intensity method” is equivalent to a 4800 x 4800 dpi
color representation)*1
Dedicated color ink cassette (Y/M/C/overcoating)
Paper
Postcard Size, L Size, Card Size (including full page label sheets, 8-label sheets)
Print Size
Postcard Size
L Size
Card Size
(Each label on an 8-label sheet)
Postcard Size
L Size
Card Size
Feeding System
Borderless
Bordered
100.0 x 148.0 mm (3.94 x 5.83 in.)
91.3 x 121.7 mm (3.59 x 4.79 in.)
89.0 x 119.0 mm (3.50 x 4.69 in.)
79.1 x 105.1 mm (3.11 x 4.14 in.)
54.0 x 86.0 mm (2.13 x 3.39 in.)
49.9 x 66.6 mm (1.96 x 2.62 in.)
22.0 x 17.3 mm (0.87 x 0.68 in.)
–
Printing from memory cards/USB flash memory/Connected to cameras
(PictBridge)
Approx. 47 sec.
Approx. 39 sec.
Approx. 27 sec.
Automatic paper feed from paper cassette
Ejection System
Automatic paper ejection on top of paper cassette
Screen
Tilt-up, 2.7 type, TFT LCD Color Monitor
Printing Speed*2
Interface
Hi-Speed USB
Y
P
O
USB Flash Memory
Connecting to a PictBridge compliant device: USB compliant Type A connector
Connecting to a computer: USB compliant Mini-B connector
CF Card, Microdrive, xD-Picture Card*3, SD Memory Card, SDHC Memory Card,
SDXC Memory Card, MMC Card, MMCplus Card, HC MMCplus Card, miniSD
Memory Card*3, miniSDHC Memory Card*3, microSD Memory Card*3, microSDHC
Memory Card*3, microSDXC Memory Card*3, RS-MMC Card*3, MMCmobile Card*3,
MMCmicro Card
FAT/exFAT only supported
Operating Temperatures
5 – 40 °C (41 – 104 °F)
Operating Humidity
Power
Power Consumption
20 – 80%
Compact Power Adapter CA-CP200 B
Battery Pack NB-CP2L (Sold Separately)
Charger adapter CG-CP200 (sold separately)
60 W or less (4 W or less on standby)
Dimensions
178.0 x 127.0 x 60.5 mm (7.01 x 5.00 x 2.38 in.) (excluding protrusions)
Weight (printer only)
Approx. 810 g (approx. 28.6 oz.)
Memory Cards
C
*1 The “concentration gradation method” used by SELPHY allows 256 shades (max) of color to be represented per dot. In
* 2
*3
comparison, printers using the area intensity method represent shades by the number of dots printed in a unit of area, i.e.
256 dots (16 dots vertical x 16 dots horizontal) are needed to represent the same 256 shades of color. SELPHY’s color
representation is therefore equivalent to a 4800 x 4800 dpi resolution based on an area intensity method.
• Gradation refers to the number of shades that can be represented on a print. For example, black and white has two
gradations, while 256 gradations include the shades of gray going from white to black that can be represented.
• “dpi” refers to the number of dots that can be printed in 1 inch (“dots per inch”).
Measured from the start of the yellow printing pass to final output.
Special adapter (commercially available) is required.
37
Compact Power Adapter CA-CP200 B
Rated Input
100 – 240 V AC (50/60 Hz) 1.5 A (100 V) – 0.75 A (240 V)
Rated Output
24 V DC, 1.8 A
Operating Temperatures
0 – 45 °C (32 – 113 °F)
Dimensions
122.0 x 60.0 x 30.5 mm (4.80 x 2.36 x 1.20 in.) (excluding power cord)
Weight
Approx. 310 g (10.9 oz.)
Dust Protection Cover DPC-CP100
This may not be included in some regions. Purchase separately as necessary.
Dimensions
137.5 x 117.0 x 27.2 mm (5.41 x 4.61 x 1.07 in.)
Weight
Approx. 88 g (3.1 oz.)
Charger Adapter CG-CP200 (Sold Separately)
Rated Input
24 V DC
Rated Output
24 V DC
Operating Temperatures
5 – 40 °C (41 – 104 °F)
Dimensions
156.2 x 49.0 x 35.5 mm (6.15 x 1.93 x 1.40 in.) (excluding protrusions)
Weight
Approx. 134 g (4.73 oz.)
Battery Pack NB-CP2L (Sold Separately)
Y
P
O
Type
Rechargeable lithium-ion battery
Nominal Voltage
22.2 V DC
Nominal Capacity
1200 mAh
Battery Life (Charge Cycles)
Approx. 300 times
Operating Temperatures
5 – 40 °C (41 – 104 °F)
Dimensions
110.0 x 40.7 x 37.5 mm (4.33 x 1.60 x 1.48 in.)
Weight
Approx. 230 g (8.11 oz.)
C
OO All data is based on tests by Canon.
OO Printer specifications or appearance are subject to change without notice.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents such as fire, etc., caused by
the malfunction of non-genuine Canon accessories (e.g., a leakage and/or explosion of a battery pack).
Please note that this warranty does not apply to repairs arising out of the malfunction of non-genuine
Canon accessories, although you may request such repairs on a chargeable basis.
38
Handling SELPHY
OO Do not apply strong impact or vibration. This may cause paper jams or the printer to malfunction.
OO Do not expose SELPHY to insect sprays and volatile liquids. Do not allow SELPHY to be in contact with
rubber or plastic products over a long time. This may deteriorate the external casing.
OO Depending on the room temperature, SELPHY may overheat and temporarily stop operating. This is not
a malfunction. Wait for a while till SELPHY cools down and restarts operating. Printing may take longer
when continuously printing, the room temperature is high, or SELPHY’s rear air vent is blocked because
SELPHY will temporarily stop printing due to overheating.
OO When moving SELPHY from a cold place to a warm place, insert SELPHY in an airtight plastic bag
in advance and remove after SELPHY has reached room temperature to avoid condensation. If
condensation forms, leave SELPHY in room temperature until the condensation evaporates naturally.
OO Clean SELPHY with a soft dry cloth.
OO If dust accumulates on the air vent (p. ‌6), remove the ink cassette (p. ‌14) and clean away the dust. The
printing results may not be clean if dust gets in from the air vent.
OO Never clean SELPHY with solvents such as benzine or thinner, or mild detergent. This may
deteriorate or deform the external casing, or the coating may peel off.
USA and Canada only:
The Lithium ion/polymer battery is recyclable.
Please call 1-800-8-BATTERY for information on how to recycle this battery.
FCC Notice
(Printer, Model CD1101 Systems)
Y
P
O
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
C
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the printer must be used with this equipment in order to comply with
Class B limits in Subpart B of Part 15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
39
Trademark Acknowledgments
OOSDXC Logo is a trademark of SD-3C, LLC.
OOThis device incorporates exFAT technology licensed from Microsoft.
OOCF5 logo is a trademark of CompactFlash Association.
About This Guide
OOReprinting, transmitting, or storing in a retrieval system any part of this guide without the permission
of Canon is prohibited.
OOCanon reserves the right to change the contents of this guide at any time without prior notice.
OOIllustrations and screenshots in this guide may differ slightly from the actual equipment.
OOThe above items notwithstanding, Canon accepts no liability for damages due to mistaken operation
of the products.
C
Y
P
O
-European Union (and EEA) only-
This symbol attached on the product is according to the WEEE Directive (2002/96/EC).
-India only-
This product is not to be disposed of with your household waste, according to the
e-waste (Management and Handling) Rules, 2011. This product should be handed
over to a designated collection point, e.g., to an authorized collection site for recycling
waste electrical and electronic equipment (EEE). Improper handling of this type of
waste could have a possible negative impact on the environment and human health
due to potentially hazardous substances that are generally associated with EEE. At
the same time, your cooperation in the correct disposal of this product will contribute
to the effective usage of natural resources. For more information regarding return and
recycling of WEEE products, please visit http://www.canon.co.in/environment
Also, this product complies with the “India E-waste Rule 2011” and prohibits use of
lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated
diphenyl ethers in concentrations exceeding 0.1 % by weight and 0.01 % by weight for
Cadmium, except for the exemptions set in Schedule II of the Rule.
CDP-E483-020
© CANON INC. 2012