Zanussi ZEI6640XBA User manual

EN
User Manual
Hob
ZEI6640XBA
Contents
Safety information
Safety instructions
Product description
Daily use
Hints and tips
2
3
5
7
9
Care and cleaning
Troubleshooting
Installation
Technical information
Energy efficiency
10
11
12
15
16
Subject to change without notice.
Safety information
Before the installation and use of the appliance, carefully read the
supplied instructions. The manufacturer is not responsible if an
incorrect installation and use causes injuries and damages.
Always keep the instructions with the appliance for future
reference.
Children and vulnerable people safety
•
•
•
•
•
•
•
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Do not let children play with the appliance.
Keep all packaging away from children.
Keep children and pets away from the appliance when it
operates or when it cools down. Accessible parts are hot.
If the appliance has a child safety device, we recommend you
activate it.
Cleaning and user maintenance shall not be made by children
without supervision.
Children of less than 3 years should be kept away unless
continuously supervised.
General Safety
•
•
2
The appliance and its accessible parts become hot during use.
Do not touch the heating elements.
Do not operate the appliance by means of an external timer or
separate remote-control system.
www.zanussi.com
•
•
•
•
•
•
•
•
Unattended cooking on a hob with fat or oil can be dangerous
and may result in fire.
Never try to extinguish a fire with water, but switch off the
appliance and then cover flame e.g. with a lid or a fire blanket.
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids should
not be placed on the hob surface since they can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control and do not
rely on the pan detector.
If the glass ceramic surface / glass surface is cracked, switch
off the appliance to avoid the possibility of electric shock.
If the supply cord is damaged, it must be replaced by the
manufacturer, an authorized Service or similarly qualified
persons in order to avoid a hazard.
Safety instructions
Installation
WARNING!
Only a qualified person must install
this appliance.
•
•
•
•
•
•
•
•
•
•
Remove all the packaging.
Do not install or use a damaged appliance.
Obey the installation instruction supplied
with the appliance.
Keep the minimum distance from the other
appliances and units.
Always be careful when you move the
appliance because it is heavy. Always wear
safety gloves.
Seal the cut surfaces with a sealant to
prevent moisture to cause swelling.
Protect the bottom of the appliance from
steam and moisture.
Do not install the appliance adjacent to a
door or under a window. This prevents hot
cookware to fall from the appliance when the
door or the window is opened.
If the appliance is installed above drawers
make sure that the space, between the
bottom of the appliance and the upper
drawer, is sufficient for air circulation.
The bottom of the appliance can get hot.
Make sure to install a non-combustile
•
Electrical Connection
WARNING!
Risk of fire and electrical shock.
•
•
•
•
•
•
•
•
•
www.zanussi.com
separation panel under the appliance to
prevent access to the bottom.
Make sure that the ventilation space of 2
mm, between the worktop and the front of
the below unit, is free. The warranty does not
cover damages caused by the lack of an
adequate ventilation space.
All electrical connections should be made by
a qualified electrician.
The appliance must be earthed.
Before carrying out any operation make sure
that the appliance is disconnected from the
power supply.
Make sure that the electrical information on
the rating plate agrees with the power
supply. If not, contact an electrician.
Make sure the appliance is installed
correctly. Loose and incorrect electricity
mains cable or plug (if applicable) can make
the terminal become too hot.
Use the correct electricity mains cable.
Do not let the electricity mains cable tangle.
Make sure that a shock protection is
installed.
Use the strain relief clamp on the cable.
3
•
•
•
•
•
•
•
•
•
Make sure the mains cable or plug (if
applicable) does not touch the hot appliance
or hot cookware, when you connect the
appliance to the near sockets
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to the
mains plug (if applicable) or to the mains
cable. Contact our Authorised Service
Centre or an electrician to change a
damaged mains cable.
The shock protection of live and insulated
parts must be fastened in such a way that it
cannot be removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure
that there is access to the mains plug after
the installation.
If the mains socket is loose, do not connect
the mains plug.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an
isolation device which lets you disconnect
the appliance from the mains at all poles.
The isolation device must have a contact
opening width of minimum 3 mm.
Use
WARNING!
Risk of injury, burns and electrical
shock.
•
•
•
•
•
•
•
•
•
•
4
Remove all the packaging, labelling and
protective film (if applicable) before first use.
Use this appliance in a household
environment.
Do not change the specification of this
appliance.
Make sure that the ventilation openings are
not blocked.
Do not let the appliance stay unattended
during operation.
Set the cooking zone to “off” after each use.
Do not rely on the pan detector.
Do not put cutlery or saucepan lids on the
cooking zones. They can become hot.
Do not operate the appliance with wet hands
or when it has contact with water.
Do not use the appliance as a work surface
or as a storage surface.
•
•
•
If the surface of the appliance is cracked,
disconnect immediately the appliance from
the power supply. This to prevent an
electrical shock.
Users with a pacemaker must keep a
distance of minimum 30 cm from the
induction cooking zones when the appliance
is in operation.
When you place food into hot oil, it may
splash.
WARNING!
Risk of fire and explosion
•
•
•
•
Fats and oil when heated can release
flammable vapours. Keep flames or heated
objects away from fats and oils when you
cook with them.
The vapours that very hot oil releases can
cause spontaneous combustion.
Used oil, that can contain food remnants,
can cause fire at a lower temperature than
oil used for the first time.
Do not put flammable products or items that
are wet with flammable products in, near or
on the appliance.
WARNING!
Risk of damage to the appliance.
•
•
•
•
•
•
•
Do not keep hot cookware on the control
panel.
Do not let cookware to boil dry.
Be careful not to let objects or cookware fall
on the appliance. The surface can be
damaged.
Do not activate the cooking zones with
empty cookware or without cookware.
Do not put aluminium foil on the appliance.
Cookware made of cast iron, aluminium or
with a damaged bottom can cause
scratches on the glass / glass ceramic.
Always lift these objects up when you have
to move them on the cooking surface.
This appliance is for cooking purposes only.
It must not be used for other purposes, for
example room heating.
Care and cleaning
•
•
•
•
Clean regularly the appliance to prevent the
deterioration of the surface material.
Deactivate the appliance and let it cool
down before you clean it.
Disconnect the appliance from the electrical
supply before maintenance.
Do not use water spray and steam to clean
the appliance.
www.zanussi.com
•
•
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads,
solvents or metal objects.
•
Disposal
•
Contact your municipal authority for
information on how to discard the appliance
correctly.
Disconnect the appliance from the mains
supply.
Cut off the mains cable and discard it.
WARNING!
Risk of injury or suffocation.
Product description
Cooking surface layout
1 Induction cooking zone
2 Control panel
1
1
180 mm
180 mm
210 mm
145 mm
1
1
2
Control panel layout
1
2
3
9
8
4
7
5
6
Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which
functions operate.
www.zanussi.com
5
Sensor
field
Function
Comment
1
ON / OFF
To activate and deactivate the hob.
2
Lock / The Child Safety Device
To lock / unlock the control panel.
-
Heat setting display
To show the heat setting.
-
Timer indicators of cooking
zones
To show for which zone you set the time.
-
Timer display
To show the time in minutes.
-
To select the cooking zone.
3
4
5
6
7
/
-
To increase or decrease the time.
8
/
-
To set a heat setting.
Power function
To activate and deactivate the function.
9
Heat setting displays
Display
Description
The cooking zone is deactivated.
-
/
-
The cooking zone operates.
Automatic Heat Up function operates.
Power function operates.
+ digit
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device function operates.
Incorrect or too small cookware or no cookware on the cooking zone.
Automatic Switch Off function operates.
Residual heat indicator
WARNING!
There is a risk of burns from
residual heat.
6
The induction cooking zones make the heat
necessary for cooking process directly in the
bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
www.zanussi.com
Daily use
Automatic Heat Up
WARNING!
Refer to Safety chapters.
Activating and deactivating
Touch
for 1 second to activate or deactivate
the hob.
If you activate this function you can get a
necessary heat setting in a shorter time. The
function sets the highest heat setting for some
time and then decreases to the correct heat
setting.
To activate the function the cooking
zone must be cold.
Automatic Switch Off
The function deactivates the hob
automatically if:
•
•
To activate the function for a cooking
all cooking zones are deactivated,
you do not set the heat setting after you
activate the hob,
you spill something or put something on the
control panel for more than 10 seconds (a
pan, a cloth, etc.). An acoustic signal sounds
and the hob deactivates. Remove the object
or clean the control panel.
the hob gets too hot (e.g. when a saucepan
boils dry). Let the cooking zone cool down
before you use the hob again.
•
•
•
you use incorrect cookware. The symbol
comes on and the cooking zone deactivates
automatically after 2 minutes.
you do not deactivate a cooking zone or
•
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
The hob deactivates after
3-4
5 hours
5
4 hours
6-9
1.5 hour
to increase the heat setting. Touch
to decrease the heat setting. Touch
and
at the same time to deactivate the cooking
zone.
www.zanussi.com
comes on). Immediately
seconds
comes on.
To deactivate the function: touch
.
Power function
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for
a limited period of time. After this time the
induction cooking zone automatically sets back
to the highest heat setting.
Refer to “Technical information”
chapter.
To activate the function for a cooking
zone: touch
.
comes on.
To deactivate the function: touch
or
.
Timer
First set the cooking zone then set the
function. You can set the heat setting before
or after you set the function.
The heat setting
Touch
(
touch
( comes on). Immediately touch
until the correct heat setting comes on. After 3
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single
cooking session.
6 hours
,1-2
zone: touch
To set the cooking zone: touch
again and
again until the indicator of a necessary cooking
zone comes on.
To activate the function or change the
time: touch
or
of the timer to set the
time (00 - 99 minutes). When the indicator of
7
the cooking zone starts to flash slowly the time
counts down.
To activate the function: activate the hob
To see the remaining time: set the cooking
for 4 seconds.
zone with . The indicator of the cooking zone
starts to flash quickly. The display shows the
remaining time.
with
. Do not set the heat setting. Touch
hob with
To deactivate the function: activate the hob
. Do not set the heat setting. Touch
To deactivate the function: set the cooking
with
zone with
and touch . The remaining time
counts back to 00. The indicator of the cooking
zone goes out.
hob with
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking
zones do not operate (the heat setting display
shows
for 4 seconds.
. Touch
or
of the timer to set the time. When the
time comes to an end, the sound operates and
00 flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
.
comes on. Touch
for 4 seconds. Set the
heat setting in 10 seconds. You can operate
the hob. When you deactivate the hob with
the function operates again.
Power management function
•
•
•
•
Lock
You can lock the control panel while cooking
zones operate. It prevents an accidental change
of the heat setting.
.
cooking time: activate the hob with
•
.
comes on. Deactivate the
To override the function for only one
).
To activate the function: touch
comes on. Deactivate the
.
•
Cooking zones are grouped according to the
location and number of the phases in the
hob. See the illustration.
Each phase has a maximum electricity
loading of 3700 W.
The function divides the power between
cooking zones connected to the same
phase.
The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
The function decreases the power to the
other cooking zones connected to the same
phase.
The heat setting display of the reduced
zones changes between two levels.
Set the heat setting first.
To activate the function: touch .
comes on for 4 seconds. The Timer stays on.
To deactivate the function: touch
previous heat setting comes on.
. The
When you deactivate the hob, you
also deactivate this function.
The Child Safety Device
This function prevents an accidental operation
of the hob.
8
www.zanussi.com
Hints and tips
WARNING!
Refer to Safety chapters.
Cookware
For induction cooking zones a
strong electro-magnetic field creates
the heat in the cookware very
quickly.
Use the induction cooking zones
with correct cookware.
Cookware material
•
correct: cast iron, steel, enamelled steel,
stainless steel, the bottom made of multilayer (with correct mark from a
manufacturer).
• not correct: aluminium, copper, brass,
glass, ceramic, porcelain.
Cookware is correct for an induction hob
if:
•
•
some water boils very quickly on a zone set
to the highest heat setting.
a magnet pulls on to the bottom of the
cookware.
The bottom of the cookware must be
as thick and flat as possible.
Cookware dimensions
www.zanussi.com
Induction cooking zones adapt to the dimension
of the bottom of the cookware automatically to
some limit.
The cooking zone efficiency is related to the
diameter of the cookware. The cookware with a
smaller diameter than the minimum receives
only a part of the power generated by the
cooking zone.
Refer to “Technical information”
chapter.
The noises during operation
If you can hear:
•
crack noise: cookware is made of different
materials (sandwich construction).
• whistle sound: you the cooking zone with
high power level and the cookware is made
of different materials (sandwich
construction).
• humming: you use high power level.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to
hob malfunction.
Examples of cooking applications
The relation between the heat setting and the
cooking zone consumption of power is not
linear. When you increase the heat setting, it is
9
not proportional to the increase of the cooking
zone consumption of power. It means that the
cooking zone with the medium heat setting uses
less than a half of its power.
Heat setting
The data in the table is for guidance
only.
Use to:
Time
(min)
Hints
Keep cooked food warm.
as neces- Put a lid on the cookware.
sary
1 - 2.
Hollandaise sauce, melt: butter,
chocolate, gelatine.
5 - 25
Mix from time to time.
1 - 2.
Solidify: fluffy omelettes, baked
eggs.
10 - 40
Cook with a lid on.
2. - 3.
Simmer rice and milkbased dishes,
heating up ready-cooked meals.
25 - 50
Add the minimum twice as much
liquid as rice, mix milk dishes part
procedure through.
3. - 4.
Steam vegetables, fish, meat.
20 - 45
Add some tablespoons of liquid.
4. - 5.
Steam potatoes.
20 - 60
Use max. ¼ l water for 750 g of
potatoes.
4. - 5.
Cook larger quantities of food,
stews and soups.
60 - 150
Up to 3 l liquid plus ingredients.
5. - 7
Gentle fry: escalope, veal cordon
bleu, cutlets, rissoles, sausages, liver, roux, eggs, pancakes, doughnuts.
as neces- Turn halfway through.
sary
7-8
Heavy fry, hash browns, loin steaks,
steaks.
5 - 15
9
Boil water, cook pasta, sear meat (goulash, pot roast), deep-fry chips.
-1
Turn halfway through.
Boil large quantities of water. Power function is activated.
Care and cleaning
WARNING!
Refer to Safety chapters.
Cleaning the hob
•
General information
•
•
•
•
•
10
Clean the hob after each use.
Always use cookware with clean bottom.
Scratches or dark stains on the surface have
no effect on how the hob operates.
Use a special cleaner applicable for the
surface of the hob.
Use a special scraper for the glass.
•
Remove immediately: melted plastic,
plastic foil, and food with sugar. If not, the
dirt can cause damage to the hob. Put the
special scraper on the glass surface at an
acute angle and move the blade on the
surface.
Remove when the hob is sufficiently
cool: limescale rings, water rings, fat stains,
shiny metallic discoloration. Clean the hob
with a moist cloth and some detergent. After
cleaning, rub the hob dry with a soft cloth.
www.zanussi.com
Troubleshooting
WARNING!
Refer to Safety chapters.
What to do if...
Problem
You cannot activate or operate
the hob.
Possible cause
Remedy
The hob is not connected to an
electrical supply or it is connected incorrectly.
Check if the hob is correctly connected to the electrical supply.
Refer to the connection diagram.
The fuse is released.
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
Activate the hob again and set
the heat setting in less than 10
seconds.
You touched 2 or more sensor
fields at the same time.
Touch only one sensor field.
There is water or fat stains on the Clean the control panel.
control panel.
An acoustic signal sounds and
the hob deactivates.
An acoustic signal sounds when
the hob is deactivated.
You put something on one or
more sensor fields.
Remove the object from the sensor fields.
The hob deactivates.
You put something on the sensor
Remove the object from the sensor field.
field
.
Residual heat indicator does not
come on.
The zone is not hot because it
operated only for a short time.
If the zone operated sufficiently
long to be hot, speak to an Authorised Service Centre.
Automatic Heat Up function does
not operate.
The zone is hot.
Let the zone become sufficiently
cool.
The highest heat setting is set.
The highest heat setting has the
same power as the function.
The heat setting changes between two levels.
Power management function operates.
Refer to "Daily use" chapter.
The sensor fields become hot.
The cookware is too large or you
put it too near to the controls.
Put large cookware on the rear
zones if possible.
Automatic Switch Off operates.
Deactivate the hob and activate it
again.
comes on.
www.zanussi.com
11
Problem
Possible cause
Remedy
comes on.
The Child Safety Device or the
Lock function operates.
Refer to "Daily use" chapter.
comes on.
There is no cookware on the
zone.
Put cookware on the zone.
The cookware is incorrect.
Use the correct cookware.
Refer to “Hints and tips” chapter.
The diameter of the bottom of the Use cookware with correct dicookware is too small for the
mensions.
zone.
Refer to “Technical information”
chapter.
and a number come on.
There is an error in the hob.
Disconnect the hob from the
electrical supply for some time.
Disconnect the fuse from the
electrical system of the house.
Connect it again. If
comes on
again, speak to an Authorised
Service Centre.
comes on.
There is an error in the hob because a cookware boils dry. Automatic Switch Off and the overheating protection for the zones
operate.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface) and an error message that comes on.
Deactivate the hob. Remove the
hot cookware. After approximately 30 seconds, activate the zone
again. If the cookware was the
problem, the error message goes
out. Residual heat indicator can
stay on. Let the cookware become sufficiently cool. Check if
your cookware is compatible with
the hob.
Refer to “Hints and tips” chapter.
Make sure, you operated the hob correctly. If
not the servicing by a service technician or
dealer will not be free of charge, also during the
warranty period. The instructions about the
Service Centre and conditions of guarantee are
in the guarantee booklet.
Installation
WARNING!
Refer to Safety chapters.
Before the installation
Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
Serial number ...........................
12
www.zanussi.com
Built-in hobs
•
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
To replace the damaged mains cable use
the following (or higher) mains cable type:
H05BB-F Tmax 90°C. Speak to your local
Service Centre.
Connection cable
•
For a single phase or two phase connection
use the following (or higher) mains cable
type: H05BB-F Tmax 90°C.
Assembly
min.
500mm
min.
50mm
min.
2mm
min. 2 mm
min. 2 mm
A
B
< 20 mm
B
> 20 mm
min. 500 mm
A
12 mm
28 mm
38 mm
A
B
57 mm
41 mm
31 mm
www.zanussi.com
min
30 mm
min. 500 mm
A
12 mm
28 mm
38 mm
B
57 mm
41 mm
31 mm
13
min.
38 mm
min.
2 mm
R 5mm
min.
55mm
490+1mm 560+1mm
min.
12 mm
min.
2 mm
14
www.zanussi.com
Protection box
If you use a protection box (an additional
accessory), the front airflow space of 2 mm and
the protective floor directly below the hob are
not necessary. The protection box accessory
may not be available in some countries. Please
contact your local supplier.
You can not use the protection box if
you install the hob above an oven.
Technical information
Rating plate
Modell ZEI6640XBA
Typ 58 GAD D5 AU
Induction 7.4 kW
Ser.Nr. .................
ZANUSSI
PNC 949 595 535 01
220 - 240 V 50 - 60 Hz
Made in Germany
7.4 kW
Cooking zones specification
Cooking zone
Nominal power
(maximum
heat setting)
[W]
Power function
[W]
Power function
maximum duration [min]
Cookware diameter [mm]
Left front
2300
3700
10
180 - 210
Left rear
1800
-
-
145 - 180
Right front
1400
2500
4
125 - 145
Right rear
1800
-
-
145 - 180
The power of the cooking zones can be
different in some small range from the data in
the table. It changes with the material and
dimensions of the cookware.
www.zanussi.com
For optimal cooking results use cookware not
larger than the diameter in the table.
15
Energy efficiency
Product information according to EU 66/2014
Model identification
ZEI6640XBA
Type of hob
Built-In Hob
Number of cooking zones
4
Heating technology
Induction
Diameter of circular cooking zones (Ø)
Left front
Left rear
Right front
Right rear
21.0 cm
18.0 cm
14.5 cm
18.0 cm
Energy consumption per cooking zone (ECelectric cooking)
Left front
Left rear
Right front
Right rear
169.3 Wh / kg
180.0 Wh / kg
185.8 Wh / kg
171.4 Wh / kg
Energy consumption of the hob (ECelectric hob)
176.6 Wh / kg
EN 60350-2 - Household electric cooking
appliances - Part 2: Hobs - Methods for
measuring performance
•
Energy saving
•
•
You can save energy during everyday cooking if
you follow bellow hints.
•
•
•
Put the cookware on the cooking zone
before you activate it.
Put smaller cookware on smaller cooking
zones.
Put the cookware directly in the centre of the
cooking zone.
When you heat up water use only the
amount you need.
If it is possible, put the lids on the cookware.
Use the residual heat to keep the food warm
or to melt it.
ENVIRONMENT CONCERNS
appliances marked with the symbol with the
household waste. Return the product to your
local recycling facility or contact your municipal
office.
Recycle the materials with the symbol . Put
the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
16
www.zanussi.com
*
www.zanussi.com
17
18
www.zanussi.com
www.zanussi.com
19
867312975-A-352014
www.zanussi.com/shop