Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Ltd, declares that this
802SH is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the
following Internet address:
http://www.sharp-mobile.com
Introduction
Congratulations on your new 3G/UMTS 802SH phone.
Useful Functions and Services
Your phone offers you the following features:
• Video calls. You can talk while viewing each other on respective screens.
• A built-in digital camera for taking pictures and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for personalising your phone in various ways.
• A WAP browser for accessing information on the mobile Internet.
• Java™ applications. You can also download various applications from Vodafone via the
mobile Internet.
• A voice recorder function for recording and playing back voice clips.
• A Bluetooth ® wireless technology interface for establishing contact and transmitting data
with certain devices. You can transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An infrared interface for data communication. You can transmit pictures, sounds, and
video clips to OBEX-enabled phones.
1
Introduction
• A schedule alarm for creating and sending schedule entries with alarm settings.
• Barcode scanner. With the built-in digital camera, you can read texts and barcodes, and
create QR codes.
• Playback of the downloaded sound and video clip files.
• SD memory card slot that expands connectivity with a PC using the memory card.
2
Introduction
About This User Guide
This user guide is carefully designed to help you learn about your phone’s features and
operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent written records of all
important data. Data may be lost or altered in virtually any electronic memory product
under certain circumstances. Therefore, we assume no responsibility for data lost or
otherwise rendered unusable, whether as a result of improper use, repairs, defects,
battery replacement, use after the specified battery life has expired or any other cause.
• We assume no responsibility, directly or indirectly, for financial losses or claims from third
parties resulting from the use of this product and any of its functions, such as stolen credit
card numbers, the loss or alteration of stored data, etc.
• All company and/or product names are trademarks and/or registered trademarks of their
respective holders.
• Screen layout may differ from that illustrated in this user guide.
The information described in this user guide is subject to change without notice.
3
Introduction
• All the functions described in this user guide may not be supported by all networks.
• We assume no responsibility for downloaded contents, information, etc. from the
network.
• Occasionally, a few black or bright pixels may appear on the screen. Please note that this
will not have any impact on any of the features or on performance.
Copyright
According to copyright laws, the reproduction, alteration and use of material which is
protected by copyright (music, pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has not received the explicit
permission from the copyright owner to reproduce, alter or use a copy which has been made
or modified in this way, this is considered to be a violation of the copyright laws and gives
the copyright owner the right to claim for damages. For this reason, avoid the illegal use of
material which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in the United States and/or
other countries.
4
Introduction
Powered by JBlend™ Copyright 1997-2004 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI Corporation
©2002-2004 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
5
Introduction
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
SD logo
is a trademark.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
6
Introduction
Contains Macromedia® Flash™ technology by Macromedia, Inc.
Copyright © 1995-2004 Macromedia, Inc. All rights reserved.
Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are
trademarks or registered trademarks of Macromedia, Inc. in the United
States and other countries.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
7
Introduction
CP8 PATENT
8
Introduction
This product is licensed under the MPEG-4 Visual Patent Portfolio License for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or
(ii) decode MPEG-4 Video that was encoded by a consumer engaged in a personal and non-commercial activity
and/or was obtained from a licensed video provider. No license is granted or implied for any other use.
Additional information may be obtained from MPEG LA. See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License for encoding in compliance with
the MPEG-4 Systems Standard, except that an additional license and payment of royalties are necessary for
encoding in connection with (i) data stored or replicated in physical media which is paid for on a title by title
basis and/or (ii) data which is paid for on a title by title basis and is transmitted to an end user for permanent
storage and/or use. Such additional license may be obtained from MPEG LA, LLC. See http://www.mpegla.com
for additional details.
9
Contents
Introduction .............................................................. 1
Your Phone ............................................................. 13
Getting Started ....................................................... 14
Inserting the SIM Card and the Battery .............. 20
Removing the SIM Card and the Battery ............ 21
Charging the Battery ........................................ 22
Inserting the Memory Card ............................... 25
Removing the Memory Card ............................. 26
Turning Your Phone On and Off ........................ 26
Keypad Lock .................................................... 28
Display Indicators ............................................ 29
Opening Your Phone ........................................ 32
Navigating Functions ............................................. 33
Using in the Normal Position of the Display ........ 33
Voice Call/Video Call Functions ............................. 35
Making a Voice Call ......................................... 35
Speed Dialling ................................................. 36
Redialling ........................................................ 37
Answering a Voice Call ..................................... 37
Incall Menu (Voice Call) .................................... 39
Making a Video Call ......................................... 44
Answering a Video Call ..................................... 45
Incall Menu (Video Call) .................................... 46
Using the Menu ...................................................... 49
Top Menu ....................................................... 49
10
Entering Characters ............................................... 51
Changing the Input Languages ......................... 53
Changing the Input Mode ................................. 53
Using Templates .............................................. 55
Contacts List ........................................................... 57
Changing the Name Order ................................ 58
Changing the List Displayed ............................. 58
Selecting the Storage Memory .......................... 59
Changing the Contacts List Order ...................... 59
Add New Contact ............................................. 59
Viewing My Contact Details .............................. 60
Copying Contacts List Entries between SIM Card
and Handset .................................................... 61
Finding a Name ............................................... 61
Dialling from the Contacts List .......................... 61
Editing Contacts List Entries ............................. 62
Deleting Contacts List Entries ........................... 62
Manage Group ................................................. 63
Assigning a Ringtone or a Ring Video Clip to Each
Contacts List Entry ........................................... 64
Memory Status ................................................ 65
Speeddial List .................................................. 65
Sending a Contacts List Entry ........................... 66
Receiving a Contacts List Entry ......................... 67
Contents
Camera ....................................................................68
Taking Pictures ................................................68
Recording Video Clips .......................................78
Messages ................................................................85
MMS ...............................................................85
SMS ................................................................85
Email ...............................................................85
Cell Broadcasts ................................................96
Area Info ..........................................................98
Setting Up MMS/SMS/Email ..............................98
Vodafone live! .......................................................102
Starting the WAP Browser ...............................103
Navigating a WAP Page ..................................103
Media Player .........................................................107
Switching between Music Player and
Video Player ...................................................107
Music Player ..................................................107
Video Player ...................................................110
My Items ...............................................................114
Pictures .........................................................115
Videos ...........................................................121
Sounds & Ringtones .......................................126
Games & More ...............................................131
Bookmarks ....................................................135
My Saved Page ..............................................135
Text Templates .............................................. 136
Other Documents .......................................... 137
Games & More ...................................................... 140
Games .......................................................... 140
Screensavers ................................................ 142
Settings ........................................................ 143
Java™ Information ........................................ 145
Organiser .............................................................. 146
Calendar ....................................................... 146
Alarms .......................................................... 150
Calculator ..................................................... 152
Voice Recorder .............................................. 154
Scanner ........................................................ 155
Stopwatch ..................................................... 159
Tasks ........................................................... 160
World Clock .................................................. 163
Countdown Timer .......................................... 164
Expenses Memo ............................................ 165
Phone Help ................................................... 166
SIM Application .................................................... 167
Settings ................................................................ 168
Profiles ......................................................... 168
Setting the Display ......................................... 175
Sound Settings .............................................. 179
Time & Date .................................................. 180
11
Contents
Language Setting ........................................... 182
Call Settings .................................................. 182
Video Call Settings ......................................... 189
Security ........................................................ 191
Memory Settings ........................................... 194
Master Reset ................................................. 194
Call Log ................................................................. 196
Call Timers .................................................... 197
Call Costs ...................................................... 198
Connectivity .......................................................... 200
Bluetooth ...................................................... 200
Infrared ......................................................... 205
Network Settings ........................................... 205
Internet Settings ............................................ 208
Backup/Restore ............................................. 212
Connecting 802SH to Your PC .............................. 215
System Requirements .................................... 215
3G/GSM GPRS Modem .................................. 216
Handset Manager .......................................... 217
Software Installation ....................................... 217
Troubleshooting ................................................... 219
Safety Precautions and Conditions of Use .......... 221
CONDITIONS OF USE ..................................... 221
ENVIRONMENT .............................................. 227
PRECAUTIONS CONCERNING VEHICLE USE ..... 228
12
SAR .............................................................. 229
PRECAUTIONS FOR USE IN USA ...................... 230
Specifications and Optional Accessories ............ 234
Specifications ................................................ 234
Optional Accessories ...................................... 234
Index ..................................................................... 235
List of Menu Functions ......................................... 240
Your Phone
Please check the following carefully. Your phone should come complete with:
• 3G (UMTS)/GSM 900/1800/1900/GPRS phone
• Lithium Ion Battery
• Battery Cover
• AC Charger
• Stereo Headset
• Handsfree Microphone Unit
• CD-ROM
• SD Memory Card
13
Getting Started
1. Earpiece
2. Navigation Keys (Arrow Keys):
abcd
Moves cursor to highlight a menu item, etc.
Up/Down arrow keys:
Displays the Contacts List when pressed during stand-by.
Left arrow key:
Displays the message inbox when pressed during
stand-by.
Right arrow key:
Displays the monthly calendar when pressed during
stand-by.
2
Displays Main menu when pressed during stand-by, then
executes a function highlighted.
3
4. Left Soft Key:
A
5. Send/Redial Key:
D
6. Shortcut Key:
S
7. Voice Mail Key:
G
8. * /Shift Key:
Executes a function at the bottom left of the screen.
Press during stand-by to display the Messaging screen.
4
5
6
7
Makes or accepts calls, displays the All Calls screen in
stand-by mode.
Press to open the shortcut menu to access the desired
applications.
Press and hold to connect to the Voice mail centre
automatically. (Depending on the SIM card.)
Switches character case between four modes: Abc, ABC,
123 and abc on the text entry screen.
Press to enter P, ?, – or * in stand-by mode.
10
11
3. Centre Key:
P
14
1
8
9
12
13
14
15
16
Getting Started
9. Microphone
10. Sub Camera (Internal Camera)
11. Display
12. Microphone (for the viewer style of the display)
13. Right Soft Key:
Executes the function at the bottom right of the screen.
Shortcut to “Vodafone live!” by opening the browser. Press
C
during stand-by.
14. End/Power Key:
F
15. Clear/Back Key:
U
16. Multimedia Key:
E
Ends a call and turns power on/off.
Clears the characters before the cursor, returns to the
previous screen, etc.
Opens the Media Player screen.
15
Getting Started
17. Keypad:
1 key:
Shortcut to the Voice mail centre. (Depending on the SIM
card.) Press and hold during stand-by.
2-9 keys:
Press and hold during stand-by to display each speed dial
phone number.
0 key:
Press and hold to enter +.
18. #/Flash Light Key:
R
Switches symbol screens on the text entry screen.
Press and hold to switch languages on the text entry
screen.
Turns the flash/auxiliary light on or off in camera mode.
Press and hold during stand-by to switch Profiles settings
between the mode most recently activated and Silent
mode.
17
18
16
Getting Started
20
19
21
22
23
19. Camera (External Camera)
20. Built-in Aerial:
Warning: Do not cover the top of the phone with your hand
when in use as this may interfere with the performance of
the built-in aerial.
21. Macro Switch:
Switches between normal (
) and macro (
) position.
(Close-up)
22. Mobile Light:
Used as a flash or an auxiliary light in camera mode.
23. Battery Cover
24. Handsfree Microphone Connector
25. External Connector:
Used to connect either the charger or a USB data cable.
26. Monaural Speaker
26
24
25
17
Getting Started
27. Infrared Port:
Sends and receives data via infrared.
28. Memory Card Slot Cover
29. Small Light:
Used as a battery charge indicator.
30. Side Keys (Side-Up/Side-Down/Camera/Cancel):
Side-Up/Side-Down:
(These two keys work in reverse with the viewer position of
the display.)
Moves the highlight up or down.
Press during stand-by or during a call to increase or
decrease the earpiece volume.
Press in camera mode to increase or decrease the zooming
ratio.
Camera Key:
18
27
Displays the Main menu when pressed during stand-by,
then executes a highlighted function. Press and hold to
activate the camera.
Press and hold to display the Options menu.
Press during an incoming call to answer the call.
Press during a call to display the Call options.
Press halfway to lock the focus in camera mode.
Press (and hold) to take a picture with the camera.
28
29
30
Getting Started
Cancel Key:
Press to return to the previous screen.
Press and hold to reject an incoming call.
Press during an incoming call to send a busy tone to the
caller.
Press to end the call.
19
Getting Started
Inserting the SIM Card and the Battery
1. Slide off the battery cover (
).
2. Slide the SIM card into the SIM holder.
3. Hold the battery so that the metal contacts of the battery are facing down, slide the
guides on the top of the battery into the battery slots
, and then insert it
.
1
2
4. Replace the battery cover.
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard accessory battery (XN-1BT90) is used.
SIM card
4
3
20
Getting Started
Removing the SIM Card and the Battery
1
1. Ensure that the phone is turned off and that the charger and other accessories are
disconnected. Slide off the battery cover (
).
2. Lift the battery using the protruding edge and remove the battery from the phone.
3. Hold
down gently while sliding the SIM card out of the SIM holder ( ).
2
Battery Disposal
The device is battery-powered. In order to protect the environment, please read the
following points concerning battery disposal:
• Take the used battery to your local waste depot, dealer or customer service centre for
recycling.
• Do not expose the used battery to a naked flame, immerse in water or dispose with the
household waste.
3
4
21
Getting Started
Charging the Battery
You must charge the battery for at least 135 minutes before using your phone for the first
time.
Using the Charger
1. Open the cover of the external connector, connect the charger to the external socket
located at the bottom of the phone by pressing both sides indicated with arrows, and
connect to an AC outlet.
The small light turns red.
Standard charging time: Approx. 135 minutes
Note
• Charging time may vary depending on the state of the battery and other conditions. (See
“Battery” on page 223.)
22
Small light
Getting Started
To Disconnect the Charger
When charging is complete, the small light turns off.
1. Unplug the charger from the AC outlet, then unplug the charger connector from the
phone.
2. Close the cover.
Note
• Do not use any non-approved chargers as they may damage your phone and invalidate
any warranties, see “Battery” on page 223 for details.
• When the phone is charging, the small light turns on and the animated battery status
indicator (
) in the upper right of the screen blinks indicating the current status of the
battery.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for charging from the cigarette lighter
socket of a car.
Battery Level Indicator
The current battery level is displayed in the upper right of the display.
23
Getting Started
Low Battery during Use
When the battery is running low, an alarm will sound and “
” is displayed on the display.
If you are using your phone and you hear the low battery alarm, attach your charger as soon
as possible. The phone may not be able to continue normal operation if you continue to use
it.
Battery Indicators
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
24
Getting Started
Inserting the Memory Card
1.
2.
3.
4.
Turn off the phone.
Open the memory card slot cover.
Insert the memory card all the way in.
Close the cover.
Note
• The miniSD memory card cannot be used with your phone.
• Make sure that the phone is turned off before inserting the memory card.
• Be sure to insert the card in the correct direction and orientation.
• The SD memory card has a write-protect switch that prevents you from deleting memory
contents by accident. If you slide the switch to the lock position, you cannot save or delete
files.
• Do not open the memory card cover while the memory card is being formatted or written
to. The card may be damaged beyond use.
• Keep all memory cards out of the reach of small children.
25
Getting Started
Tip
• You see the following indicators when the memory card is in use:
:
:
:
:
:
:
Appears when the card is inserted.
Appears when the card is inserted and locked.
Appears when the card is damaged or unusable.
Appears when the card is locked and damaged or unusable.
Appears when the card is being written or read.
Appears when the card is being formatted.
Removing the Memory Card
1. Open the memory card slot cover, remove the card, and close the cover.
Note
• Make sure that the phone is turned off before removing the memory card.
• Do not remove the memory card while the memory card is being formatted or written to.
Turning Your Phone On and Off
To turn the power on, press and hold F for approximately 2 seconds.
The stand-by screen is displayed.
26
Getting Started
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal Identification Number) code and handset
lock code after turning on your phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press
.
To turn the power off, press and hold F for approximately 2 seconds.
Note
• If your PIN code is entered incorrectly three times in a row, the SIM card is locked. See
“Enabling/Disabling the PIN Code” on page 191.
• If the clock settings have not been made, the date and time entry screen is displayed
(p. 180).
To Copy All Contacts List Entries from the SIM Card
When you insert the SIM card into your phone for the first time and start the Contacts List
application, you are asked whether you wish to copy Contacts List entries on the SIM card.
Follow the on-screen instructions, or you can do it later using the Contacts List menu as
follows:
“Contacts” → “Advanced” → “Copy All Entries”
1. Select “SIM to Handset”.
27
Getting Started
Keypad Lock
You can lock the keypad to prevent it from being pressed accidentally.
Locking the Keypad
1. Press and hold P during stand-by.
To unlock, press and hold P.
Tip
• Emergency numbers (112, etc.) can be entered and dialled regardless of the keypad lock.
28
Getting Started
Display Indicators
Indicator area
1.
/
: Strength of received signal/Service out of range
: 3G (UMTS)/GPRS
: GSM/GPRS
: Roaming outside network
2.
Indicator area
12:00
Left soft
key
01.01.05
Centre key
Right soft
key
:
Offline mode [enabled]
3.
:
4.
/
Data exchange with external device
5.
:
6.
/
:
7.
/
/
8.
:
9.
:
10.
/
:
Connection to the server [established/communicating]
Memory card inserted
Voice call [incoming/in progress]
: Video call communication mode enabled
Diverts set to “Voice calls” of “All Calls”
Secure WAP page displayed
/
: Alerts [text message/multimedia message/email]
29
Getting Started
11.
/
/
12.
/
:
/ / :
Connection status
[USB cable/IrDA ON/IrDA exchanging information/Bluetooth wireless
setting [enabled (during stand-by or except during stand-by)/exchanging
information/talking with the Bluetooth headset]]
Java™ application [executed (colour)/suspended (grey)]
13. (No display)/
/ / / / :
Current profile [Normal/Meeting/Activity/Car/Headset/Silent]
14.
/
/ :
Silent/vibration setting [silent/increasing volume/vibration enabled/silent
and vibration enabled/increasing volume and vibration enabled]
15.
/
16.
/
:
19.
/
20.
:
: Speaker mode [speaker phone/speaker activated/microphone muted]
/
:
18.
/
/
/
17:
30
/
/
:
Battery level [sufficiently charged/charging recommended/charging
required/empty]
Mobile light enabled
Daily alarm enabled
:
Schedule entry enabled [with/without reminder alarm]
Outbox contains unsent messages [text message/multimedia/email]
Getting Started
21.
/
/
: WAP/OTA provisioning alerts [WAP alert/OTA provisioning alert/WAP and
OTA provisioning alerts]
22.
:
Voicemail message alert
23.
:
Connection status [1st IrDA communication [enabled/exchanging
information]]
24.
:
Phone Lock enabled
25.
:
Keypad Lock enabled
26.
/(blank): IrDA setting [enabled/disabled]
27. 12:00:
Clock
28. 01.01.05:
Date
29. (Operator name)
30. (Cell Broadcasts information)
Soft Key Indicators
To execute the operation indicated, press the corresponding key.
31. Area at the lower left of the screen:
Display the operation executed by the left soft key.
32. Area at the lower right of the screen:
Display the operation executed by the right soft key.
31
Getting Started
Opening Your Phone
Your phone can be opened in the following three positions: normal, self-portrait and viewer
positions.
Normal Position
1. Open the phone until the display stops as illustrated.
Self-portrait Position
2. Turn the display 180° clockwise.
Use this position to take a self-portrait position with the external camera.
Do not turn the display anticlockwise as this may damage it.
Viewer Position
3. Close the display toward the keypad.
Note
• Operations of the side-up and side-down keys are reversed in the viewer position of the
display.
• Keypad operations cannot be performed in the viewer position of the display.
• Do not carry the phone in the viewer position of the display as this may damage the
display.
32
Navigating Functions
Using in the Normal Position of the Display
All applications are accessed from the Main menu. To open the Main menu, press the centre
key ( ) during stand-by.
To launch applications, you will need to highlight menu items, and make selections. To
select a menu item (indicated in quotation marks), move the cursor using a, b, c and
d, and press
to select.
In certain procedures, you will need to press one of the soft keys (indicated in square
brackets), which are displayed at the bottom left and right of the screen. Press the
corresponding soft key (A or C).
To return to the previous screen, press the right soft key if it displays Back. To close the
Main menu, press the right soft key if it displays Exit.
Each section in this user guide starts with a list of items you will need to select in order
(indicated in italics) before performing the procedures shown. Select each item to reveal the
next set of items that you have to select. Open subsection items after opening those listed
in the main section.
Example:
“Contacts” → “Contacts List” → “Add New Contact”
33
Navigating Functions
Using in the Viewer Position of the Display
Available keys in viewer position of the display are the side-up and side-down keys, camera
key and cancel key.
To open the Main menu, press the camera key during stand-by.
To select a menu item (indicated in quotation marks), press the side-up and side-down keys
and press the camera key to select.
In certain procedures, you will need to press one of the soft keys (indicated in square
brackets), which are displayed at the bottom left and right of the screen. The left soft key is
the camera key and right soft key is the cancel key.
The side keys function in camera mode as follows:
Side-up/Side-down keys:
Zoom-in/Zoom-out
Camera key:
Capture
Cancel key:
Options
34
Voice Call/Video Call Functions
Tip
• You can make and answer a call in the viewer position of the display using the side keys.
Making a Voice Call
Enter Number
1. Enter the area code and the phone number you wish to dial and press D to dial.
If you enter the wrong number, press U to delete the number to the left of the cursor.
Emergency Calls
1. Enter 112 or 911 (international emergency number) using the keypad and press D
to dial.
XXXXXXXXXXX
Options
Back
Note
• Emergency calls may not be able to be made on all mobile phone networks when certain
network services and/or phone features are in use. Contact your network operator for
more information.
• This emergency number can normally be used to make an emergency call in any country,
with or without a SIM card inserted, if a 3G (UMTS)/GSM network is within range.
Calling by Voice
XXXXXXXXXXX
End Call
35
Voice Call/Video Call Functions
International Calls
1. Press and hold Q until a + (international dialling prefix) sign is displayed.
2. Enter the country code, followed by the area code (without the leading zero) and the
phone number, and press D to dial.
Adding an Entered Phone Number to the Contacts List
1. After entering a phone number, press [Options] and select “Save Number”.
For details on creating a new entry, see “Add New Contact” on page 59.
Showing or Hiding My Phone Number on the Display of the Called Party
1. After entering a phone number, press [Options] and select “Hide My ID” or “Show
My ID”.
Speed Dialling
Up to 8 phone numbers from the Contacts List memory (Handset and SIM) can be assigned
to speed dials. You can call the numbers using the digit keys (G to O). The phone
number of the Voice mail centre is assigned to G.
For details on setting the speeddial list, see “Speeddial List” on page 65.
1. To dial a number using the speed dial, press and hold any of the digit keys (G to
O).
The phone number saved in the speeddial list is dialled.
36
Voice Call/Video Call Functions
Redialling
You can redial numbers in the call log. Select from specific categories or “All Calls”. Specific
categories contain up to 10 numbers and the “All Calls” list contains up to 30.
1. Press D during stand-by.
2. Select the category from “All Calls”, “Dialled Numbers”, “Missed Calls” or
“Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial the call.
Answering a Voice Call
When an incoming call is detected, the phone rings.
1. Press D or [Answer] to answer the call.
Or press any key except F,
, U and [Busy] when the “Any Key Answer” function
is enabled. Set the Any Key Answer function in the profile of each mode (p. 174).
37
Voice Call/Video Call Functions
Tip
• If you have subscribed to the Calling Line Identification (CLI) service and the caller’s
network sends the number, the caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Contacts List, the caller’s name and phone number
are displayed on the screen.
• If the number is a restricted number, the display shows “Withheld”.
• When you receive a call from the person whose picture is registered in the Contacts List,
the picture, name and phone number are displayed.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy tone to the caller of an
incoming call letting them know that you cannot answer the call.
38
Voice Call/Video Call Functions
Incall Menu (Voice Call)
Your phone has additional functions available while a call is in progress.
Adjusting the Earpiece Volume
During a call, you can adjust the earpiece volume (and handsfree volume, if connected).
1. During a call, press the side-up or side-down key to display the Earpiece Volume
screen.
2. Press the side-up key (or a/d) to increase the volume of the call or press the
side-down key (or b/c) to decrease the volume.
Five levels (level 1 to 5) can be selected.
3. Press
when the volume is set to the desired level.
The phone returns to the in-call screen automatically if left unoperated.
Turning the Speaker On and Off
You can talk via the loud speaker on the back of the phone by turning it on.
1. During a call, press [Options] and select “Loud Speaker On”.
39
Voice Call/Video Call Functions
Putting a Call on Hold
This function allows you to manage two calls at the same time. If you wish to make another
call while you are talking to someone, you can put the current call on hold to call someone
else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call to, then press D.
Tip
• You can also make another call by entering the phone number during a call instead of
step 1. The current call is automatically put on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Send Message”.
The following options are available: “Create New” to make an SMS and MMS, or
“Inbox”, “Sent” or “Drafts” to access these folders. For details on SMS, see “SMS” and
“MMS” on page 85.
40
Voice Call/Video Call Functions
Call Waiting
This service notifies you of another incoming call while you have a call in progress.
1. During a call, press [Options] and select “Hold & Answer” to answer the second call.
The first call is put on hold and you can now talk to the second caller.
2. Press [Options] and select “Release & Answer” to end the current call and return to
the held call.
Note
• You need to set “Call Waiting” to “On” if you use the Call Waiting service (p. 184).
• Call Waiting service may not be available on all networks. Contact your network operator
for more information.
• If you do not wish to answer the second call, press [Options] and select “Busy” in step 1.
If “Reject” is selected, the log of the second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may include up to 5 participants
in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi Party”.
2. Select “Conference All” to join the conference call.
3. Press F to end the conference call.
41
Voice Call/Video Call Functions
Note
• The conference call service may not be available on all networks. Contact your network
operator for more information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold, select “Private”.
• To end the call with all participants, select “End Active Call(s)” or “End Held Call(s)”.
• To reject adding more participants to the current party, press [Options] and select
“Reject”, or you can send the busy tone by selecting “Busy”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference call and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you wish to disconnect from the
conference call.
2. Press [Options] and select “End Active Call(s)” or “End Held Call(s)”.
42
Voice Call/Video Call Functions
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the participants, you may select the
participant from the conference list and put the other participants on hold.
1. During a conference call, select the person that you wish to talk to.
2. Press [Options] and select “Multi Party”.
3. Select “Private”.
4. Once you have finished the private conversation, press [Options] and select “Multi
Party”.
5. Select “Conference All” to return to the conference call.
Muting the Microphone
1. During a call, press [Mute] to mute the microphone.
To unmute the microphone, press [Unmute].
43
Voice Call/Video Call Functions
Making a Video Call
Video Call
Note
• Use this function with only the video call enabled phones.
• Make sure that the battery is fully charged and the signal length is greater before using
this function.
• Use a switch-equipped earphone microphone or handsfree kit so that you can talk while
looking at the video call screen on the display.
Status Indicators
1. Sub screen for your image
2. Elapsed time (hour:minute:second)
3. Main screen for the calling party’s screen
4. Calling party’s name
5. Calling party’s phone number
Making a Video Call
1. Enter the area code and the phone number you wish to dial and press [Options] and
select “Video Call” to dial.
If you enter the wrong number, press U to delete the number to the left of the cursor.
When the line is connected, the image of the called party is displayed upper on the
screen, and yours lower left.
44
0:00:02
2
3
xxxx
XXXXXXXXXXX
1
Options
Mute
4
5
Voice Call/Video Call Functions
Tip
• If the called party’s phone is not video call enabled, you can press F and enter the
phone number again to make a voice call.
• When the call ends, the last call cost is displayed.
Answering a Video Call
When an incoming call is detected, the phone rings.
1. Press D to answer the call by video or A [Answer] to answer the voice only.
Tip
• When the call is ended, the call cost is displayed.
• If you have subscribed to the Calling Line Identification (CLI) service and the caller’s
network sends the number, the caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Contacts List, the caller’s name and phone number
are displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy tone to the caller of an
incoming call letting them know that you cannot answer the call.
45
Voice Call/Video Call Functions
Incall Menu (Video Call)
Muting the Microphone
1. During a video call, press [Mute] to mute a microphone.
To unmute the microphone, press [Unmute].
Swapping Images
You can swap images between the main and sub screens.
1. During a video call, press [Options] and select “Swap Images”.
Changing the Image of Yourself
1. During a video call, press [Options] and select “Camera Picture”.
2. Select from “Internal Camera”, “External Camera” or “Alternative Image”.
“Internal Camera”:
“External Camera”:
“Alternative Image”:
46
The image through the internal camera is displayed and sent
to the party.
The image through the external camera is displayed and sent
to the party.
The camera is turned off and the image selected in
“Alternative Image” of “Video Call Settings” (p. 189) is used.
Video Call
Options
Swap Images
Camera Picture
Loud Speaker Off
Enable DTMF
Video Call Settings
Select
Back
Voice Call/Video Call Functions
Turning the Speaker On and Off
You can talk via the loud speaker on the back of the phone by turning it on.
1. During a call, press [Options] and select “Loud Speaker On”.
Note
• In a high-noise environment, you may not be able to continue a call, or make a clear call.
We recommend that you use the Stereo Headset and Handsfree Microphone Unit.
• With this option, you may not be able to continue a call without interruption if you increase
the earpiece volume. We recommend that you decrease the earpiece volume or use the
Stereo Headset and Handsfree Microphone Unit.
Video Call Settings
To Change the Quality of the Incoming Image
You can adjust the quality of the called party’s image.
1. During a video call, press [Options] and select “Video Call Settings”.
2. Select “Incoming Format”.
3. Select “Normal”, “Quality Prio.” or “Frame Rate Prio.”.
“Normal”:
“Quality Prio.”:
“Frame Rate Prio.”:
The standard quality is used.
The quality of the picture takes precedence over the frame
rate.
The frame rate takes precedence over the quality.
47
Voice Call/Video Call Functions
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video call, press [Options] and select “Video Call Settings”.
2. Select “Backlight”.
3. Select from “On”, “As Normal Setting” or “Off”.
When “On” is selected, the backlight will always be on during a video call.
When “As Normal Setting” is selected, the backlight will time out depending on the
Backlight setting (p. 178).
To Adjust the Video Exposure
1. During a video call, press [Options] and select “Video Call Settings”.
2. Select “Exposure”.
3. Press a (Light) or b (Dark).
48
Using the Menu
Top Menu
1. Press
during stand-by.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu, then press
to access the
function.
The sub menu is displayed.
For details on the menu options, see the table on pages 240 and 241.
Camera
Using the Menu in the Viewer Position of the Display
Select
Exit
camera key.
Press the cancel key to return to the Main menu.
The focus moves the same as in the normal position of the display by using the side-up
and side-down keys illustrated by arrows.
For details on the functions of these keys, see page 18.
Camera
Select
1. Set the phone in the viewer position of the display.
2. Press the camera key to display the Main menu.
3. Press the side-up or side-down key to move the focus up or down, then press the
Exit
49
Using the Menu
Shortcuts
Your phone has a shortcut key (assigned to the shortcut key: S) with which you can
access the desired menu quickly. The default shortcuts are as follows, which you can later
customise:
• Dialled Numbers
• Received Calls
• Calendar
• Calculator
• Voice Recorder
To Use the Shortcuts
1. Press the shortcut key.
2. Select the desired item.
To Customise the Shortcuts
1. Press the shortcut key.
2. Press [Options] and select “Assign”.
The list of the available items is displayed.
3. Select the desired item.
Note
• To move the item in the list that appears in step 1, highlight the item, press [Options] and
select “Move”.
Then press a or b to the desired location and press
.
50
Entering Characters
When entering characters to create Contacts List entries, text messages or multimedia
messages, etc., press the corresponding keys.
In multi-tap input method, press each key until the desired character is displayed. For
example, press H once for the letter A or twice for the letter B.
Table of Characters
Pressing each key scrolls characters in the following order. The order varies depending on
the language selected.
English Mode
Key
G
H
I
J
K
L
M
Upper Case
Characters
Lower Case
Characters
Numeric
. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ :1
1
ABC2
abc2
2
DEF3
def3
3
GHI4
ghi4
4
JKL5
jkl5
5
MNO6
mno6
6
PQRS7
pqrs7
7
51
Entering Characters
Key
N
O
Q
P
R
Upper Case
Characters
Numeric
TUV8
tuv8
8
WXYZ9
wxyz9
9
(space) + = < > € £ $ ¥ % & 0
0
Switches character case between four modes:
Abc, ABC, 123 and abc.
. , ?
@ ' "
% / ˜
¿ ¡ ^
Æ å ä
Ñ ñ Ö
ù ∆ Φ
Ξ (space)
G-O:
Q
P:
R:
52
Lower Case
Characters
!
(
<
[
æ
Ø
Γ
↵
:
)
>
]
à
ö
Λ
;
_
§
{
Ç
ø
Ω
&
=
}
É
ò
Π
+
€
\
¤
è
ß
Ψ
#
£
|
Å
é
Ü
Σ
∗
$
¥
Ä
ì
ü
Θ
Press and hold to enter 0 - 9 numbers.
Press and hold to shift between multi-tap and T9 mode.
Press and hold to display the Input Language screen.
Entering Characters
Changing the Input Languages
You can change the input language on the text entry screen.
1. On the text entry screen, press [Options] and select “Input Language”.
2. Select the desired language.
Changing the Input Mode
T9 Text Input
T9 text input method is a shortcut to enter text easily and quickly.
1. On the text entry screen, press and hold P to enter T9 mode.
2. Press [Options] and select “Input Mode”.
3. Select the input mode (Abc, ABC, abc, 123).
4. Press each key once for any letter you require on that key.
To enter the word “How”, press J L O.
5. If the word shown isn’t the one you want, press a or b until you highlight the
correct one.
6. Press
to select the word.
Note
• If the correct word is not shown in step 5, enter the correct word again after switching to
the multi-tap input method.
53
Entering Characters
Tip
• If you press Q instead of step 6, a space is inserted next to the selected word.
Symbols and Punctuation
1. On the text entry screen, press [Options] and select “Add Symbol”.
2. Select the desired symbol.
My Dictionary
You can create your own word list for T9 text input.
1. On the text entry screen in T9 mode, press [Options] and select “My Dictionary”.
2. Select “Add New Word” and enter a new word.
To edit a word in the list
1. On the text entry screen in T9 mode, press [Options] and select “My Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
54
Entering Characters
Using Templates
You can use the sentences registered in Text Templates when entering characters.
For details on creating the text template, see “Adding Phrases to Text Templates” on
page 136.
1. On the text entry screen, move the cursor to the point you wish to insert the
template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
The selected text template is inserted.
Copying, Cutting and Pasting Text
By using these options, you can carry out editing smoothly.
To Copy and Cut Text
On the text entry screen, press [Options] and select “Advanced”.
Select “Copy” or “Cut”.
1.
2.
3.
4.
Move the cursor to the first letter to be copied or to be cut, then press
Move the cursor to the last letter to highlight the area, then press
.
.
55
Entering Characters
To Paste Text
1. On the text entry screen, move the cursor to the point you wish to paste the letters.
2. Press [Options] and select “Advanced”.
3. Select “Paste”.
The saved text is pasted.
56
Contacts List (M 8-1)
Contacts
Contacts List
Manage Group
Speeddial List
My Contact Details
Advanced
Select
Back
You can store the phone numbers and email addresses of your friends, family and
colleagues in the Contacts List.
Your phone can store up to 500 entries. In a Contacts List, you can save the following items:
Items Saved in the Handset Memory
First Name:
up to 16 characters
Last Name:
up to 16 characters
Tel 1:
up to 32 digits
Tel 2 (displayed if “Tel 1” is entered):
up to 32 digits
Tel 3 (displayed if “Tel 2” is entered):
up to 32 digits
Email1:
up to 128 characters
Email2 (displayed if “Email1” is entered):
up to 128 characters
Email3 (displayed if “Email2” is entered):
up to 128 characters
Group:
16 groups (Group names can
be edited by the Manage
Group menu.)
Street Name:
up to 64 characters
City Name:
up to 64 characters
State Name:
up to 64 characters
Postcode:
up to 20 characters
Country Name:
up to 32 characters
Note:
up to 256 characters
57
Contacts List
Birthday:
Picture:
Assign Tone/Video (For Voice Call, For Video Call, For New Message):
Secret:
Items Saved in the SIM Memory
Name:
up to 16 characters
Tel 1:
up to 32 digits
Tel 2 (displayed if “Tel 1” is entered):
up to 32 digits
Email1:
up to 80 characters
Group:
11 groups (Group names can be edited using the Manage
Group option.)
Using the infrared or Bluetooth wireless function, you can send the Contacts List entry to a
PC to share the same entries.
Changing the Name Order
“Contacts” → “Advanced” → “Name Order”
1. Select “First-Last Name” or “Last-First Name”.
Changing the List Displayed
“Contacts” → “Advanced” → “Contacts Location”
1. Select “Handset” or “SIM”.
58
Contacts List
Selecting the Storage Memory
“Contacts” → “Advanced” → “Save New Contact to”
1. Select the Contacts location from “Handset”, “SIM” or “Choice”.
Tip
• “Choice” prompts you to choose the memory every time you save a new entry.
Changing the Contacts List Order
You can change the listing order of the Contacts List entries between by alphabet order or
by group.
“Contacts” → “Advanced” → “View Contacts”
1. Select “By Alphabet” or “By Group”.
Add New Contact
You can choose either the phone or SIM card memory locations to store the new entry. For
switching locations, see “Selecting the Storage Memory”.
The amount of phone numbers that you can store to the SIM card is dependent on its
capacity. Contact your network operator for details.
“Contacts” → “Contacts List” → “Add New Contact”
If you select the “Choice” option for the memory to be used, the selection is between “To
Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the relevant information.
2. Press [Save] when finished.
59
Contacts List
Tip
• To create an entry, at least one field must be filled (“First Name”, “Last Name”, “Tel 1”
or “Email1” for the handset memory; “Name”, “Tel 1” or “Email1” for the SIM memory).
Adding a Thumbnail to Entries
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3.
4.
5.
6.
Select “Picture:”.
Select “Assign Picture”.
Select the desired picture.
Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the corresponding thumbnail is also
deleted.
Viewing My Contact Details (M 8-4)
You can register and edit your own contact as other Contacts List entries.
“Contacts” → “My Contact Details”
60
Contacts List
Copying Contacts List Entries between SIM Card and Handset
“Contacts” → “Advanced” → “Copy All Entries”
1. Select “SIM to Handset” or “Handset to SIM”.
Note
• When you insert the SIM card into your phone for the first time and start the Contacts List
application, the confirmation screen is displayed automatically, asking you if you wish to
copy or not. The number of Contacts List entries to be copied varies depending on the
SIM capacity.
• If the memory space is not enough to save all entries, you cannot complete copying.
Finding a Name
“Contacts” → “Contacts List”
1. Enter the first few letters of the name.
Search results are displayed in alphabetical order.
Tip
• You can select the Contacts location from “Handset” or “SIM” before searching.
Dialling from the Contacts List
“Contacts” → “Contacts List”
1. Highlight the desired entry and press D.
61
Contacts List
Tip
• If more than one phone number is registered for the entry, highlight the desired phone
number after step 1 and press D.
• You can also dial from the details screen of the Contacts List. On the details screen, select
the desired phone number and press D.
Editing Contacts List Entries
“Contacts” → “Contacts List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
Deleting Contacts List Entries
Deleting All Contact Entries
“Contacts” → “Advanced” → “Delete All Entries”
1. Select “Handset Entries” or “SIM Entries”.
2. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
62
Contacts List
Deleting a Contact Entry
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Manage Group (M 8-2)
Different ringtones can be set for each group. If you do not change a group ringtone, the
ringtone assigned in the Settings menu is used.
“Contacts” → “Manage Group”
1. Highlight the desired group.
2. Press [Options] and select “Assign Tone/Video”.
3. Select from “For Voice Call”, “For Video Call” or “For New Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “My Sounds”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip in the Settings menu, see
“Assigning a Ringtone” on page 170 or “Assigning a Ring Video Clip File” on page 171.
Note
• You can only edit group names in the SIM card. You cannot edit the ringtone or ring video
settings.
63
Contacts List
Editing the Group Name
You can edit group names to be assigned to the Contacts List entries. First, change the
Contacts List displayed (p. 58).
“Contacts” → “Manage Group”
1. Highlight the desired group name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Assigning a Ringtone or a Ring Video Clip to Each Contacts List
Entry
A specified ringtone or vibration setting can be associated to a pre-registered entry.
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Assign Tone/Video”.
4. Select “For Voice Call”, “For Video Call” or “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
6. Select “Preset Sounds” or “My Sounds”.
64
Contacts List
7. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip in the Settings menu, see
“Assigning a Ringtone” on page 170 or “Assigning a Ring Video Clip File” on page 171.
8. Press [Save] when finished.
Memory Status
This function helps you to check the memory used in the Contacts List.
“Contacts” → “Advanced” → “Memory Status”
Speeddial List (M 8-3)
You can set a maximum of 8 phone numbers in the speeddial list (p. 36).
Setting Contacts List Entries in the Speeddial List
“Contacts” → “Contacts List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Add to Speeddial”.
4. Select the desired location.
Tip
• The nine digit keys correspond to list numbers.
• To view the speeddial list, see “Speed Dialling” on page 36.
65
Contacts List
To Edit the Speeddial List
“Contacts” → “Speeddial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select the desired option.
“Re-Assign” (displayed when a phone number is already assigned):
Displays the Contacts List entries. Select (Reassign) other entries.
“Assign” (displayed when no phone number is assigned):
Displays the Contacts List entries. Select (assign) the desired entry.
“View”:
Displays the assigned phone number.
“Delete”:
Deletes the selected phone number from the speeddial list.
“Clear All”:
Clears all phone numbers from the speeddial list.
Sending a Contacts List Entry
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Send Contact”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
66
Contacts List
For “As Message”
For details, see “MMS” on page 85.
For “Via Bluetooth”
For details, see “Bluetooth” on page 200.
For “Via Infrared”
For details, see “Infrared” on page 205.
Receiving a Contacts List Entry
When the phone receives a Contacts List entry, a confirmation message is displayed during
stand-by.
1. Press [Yes].
The received entry is saved in the Contacts List. Press [No] to reject.
Tip
• For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on
page 200.
• For details on making MMS settings, see “MMS Settings” on page 101.
67
Camera (M 5)
Your phone has an integrated digital camera.
This allows you to shoot and send pictures and video clips wherever you are.
Taking Pictures
“Camera”
1. Press
to take the picture.
The shutter sounds and the still image of the taken picture is displayed.
2. Press [Save].
To cancel, press [Cancel].
The taken picture is saved in My Items.
Note
• Press the camera key instead of
in the viewer position of the display.
• When the digital camera is not activated, press [Options] and select “Go to Photo
Camera”, or press c.
Taking a Self-Portrait
You can take a self-portrait while looking at the display.
1. Rotate the display 180° clockwise from the normal position.
2. Press the camera key on the side of the phone.
68
Save
Cancel
Camera
Note
• Do not rotate the display anti-clockwise. Otherwise, the phone may malfunction.
• When the distance to the subject is approximately 10 cm, set the macro switch to the
macro position (
). When the distance to the subject is approximately 40 cm or more,
set the macro switch to the normal position (
).
Taking Close-up Pictures
1. In digital camera mode, set the macro switch to the macro position ( ).
2. Press
or the side-down key to take the picture.
To cancel macro mode, set the macro switch to the normal position (
).
Sending Taken Pictures
You can send the taken picture via “With Message” or “live! Postcard”. (The Postcard
service is not available with some service providers. Contact your service provider for more
information.)
“Camera”
1. Press
to take the picture.
2. Press
.
3. Select the send option.
For details, see “Creating a New Message” on page 85. After the message has been
sent, the taken picture is stored in My Items. (The resized picture is not saved in My
Items.)
Note
• When you try to send the picture that has too large a file size, the picture size is resized
for the message. The original sized picture is saved in My Items.
69
Camera
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved in the JPEG format.
“Camera” → [Options] → “Picture Settings” → “Picture Size”
1. Select the desired size.
Picture Sizes: 960 × 1280 dots
768 × 1024 dots
480 × 640 dots
240 × 320 dots
120 × 160 dots
120 × 128 dots
Adjusting the Exposure
“Camera” → [Options] → “Picture Settings” → “Exposure”
1. Press a (Bright) or b (Dark).
Picture brightness (exposure level) indicators
: (Bright → Normal → Dark)
Once the phone has returned to the stand-by screen, the brightness settings return to
default.
70
Camera
Mobile Light
To Change the Light Colour
You can take a picture in various colour modes.
“Camera” → [Options] → “Picture Settings” → “Mobile Light” → “Light Colour”
1. Select the desired light colour.
Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue/Disco
To Change the Mobile Light Mode
Set the mobile light according to your purpose.
“Camera” → [Options] → “Picture Settings” → “Mobile Light” → “Switch On/
Off”
1. Select the desired mode.
“On” ( ):
The light is always on.
“Auto” ( ):
The light turns on if the phone detects that the conditions are dark.
“Low Light” ( ): Select this mode for macro shooting.
“Off”:
The light is always off.
The corresponding indicator is displayed on the screen. Select “Off” to turn it off.
71
Camera
Using the Timer (Timer)
“Camera” → [Options] → “Camera Modes” → “Timer”
1. Select “On” or “Off”.
“ ” is displayed on the screen when you select “On”.
Selecting the Scene
You can select the appropriate mode by scene when you take the picture.
“Camera” → [Options] → “Picture Settings” → “Scene”
1. Select the desired scene.
72
Camera
Continuous Shoot
You can take continuous shoots in various options.
“Camera” → [Options] → “Camera Modes” → “Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”:
The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures”: Takes 4 or 9 pictures continuously.
After selecting this mode, select the desired speed from the
following:
“Very Fast”
“Fast”
“Normal”
“Slow”
“Very Slow”
“Manual”
“Bracket”:
Takes 9 continuous pictures with various colours and
brightness levels.
After selecting this mode, press
then select “Fast” or
“Normal”.
“Overlapped”:
Overlaps continuous pictures into one picture and makes an
afterimage.
After selecting this mode, press
then select “Fast” or
“Normal”.
73
Camera
Note
• When you select “Manual” to take continuous pictures, press
or the camera key (in
the viewer position of the display) manually in the desired speed.
• When the Timer and Continuous Shoot functions are simultaneously set, “ ” (for “4
Pictures”, for example) is displayed instead.
Selecting a Frame
You can select the frame from preset patterns. You can also select a frame in Saved
Pictures.
“Camera” → [Options] → “Camera Modes” → “Photo Frame”
1. Select “Preset Frames” or “My Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press
.
Note
• Images larger than 240 dots [W] × 320 dots [H] cannot be used.
Switching to the Video Camera Mode
You can switch from the camera mode to the video camera mode. You can also switch
between these two modes by pressing d.
“Camera” → [Options] → “Go to Video Camera”
74
Camera
Using the Full Screen
You can display the preview on the full screen without the soft key area and indicator area.
“Camera” → [Options] → “Advanced”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal Viewfinder”.
Selecting the Picture Quality
“Camera” → [Options] → “Picture Settings” → “Picture Quality”
1. Select the desired picture quality.
Picture quality indicators
: Super Fine
: Fine
: Normal
Selecting the Shutter Sound
You can select the shutter sound from 3 preset patterns.
“Camera” → [Options] → “Advanced” → “Shutter Sound”
1. Select the desired shutter sound.
Note
• Continuous Shoot uses the specialised shutter sound that cannot be changed from the
above settings.
75
Camera
Selecting the Storage Memory
You can select the location to save the taken pictures in.
“Camera” → [Options] → “Advanced” → “Save New Pictures to”
1. Select the desired location from “Handset Memory”, “Memory Card” or “Choice”.
Note
• If you select “Choice”, select the desired location every time you save.
76
Camera
Auto Save
You can set the phone to save pictures automatically.
“Camera” → [Options] → “Advanced” → “Auto Save”
1. Select “On”.
Select “Off” to disable.
Using the Help Function
“Camera” → [Options] → “Help”
Exiting from the Viewer Position of the Display
Carry out the following operation when you want to go back from the viewer position of the
display to the normal position.
1. Press and hold the cancel key in the viewer position.
77
Camera
Recording Video Clips
You can record a video clip with your phone. You can also use this function in the viewer
position of the display.
Recording Video Clips
“Camera”
The preview is displayed through the screen.
1. Press
.
Press the camera key in the viewer position of the display.
2. To stop recording, press
.
To view the preview before saving, select “Preview”.
3. Select “Save”.
The video clip is saved in My Items.
Note
• If you want to record a video clip in landscape, set the phone to the viewer position of the
display while in the viewfinder mode. The display switches to landscape automatically.
• Put the phone into the video camera mode to record a video. Video clips are saved in
“.3gp” format in the following two modes:
For Message:
QCIF or SubQCIF
Extended Video: QCIF, SubQCIF or QVGA (MPEG4)
QVGA (MPEG4) is available when you select “Extended Video” for the Recording Time
(p. 81) and select QVGA (MPEG4). The video clips are saved in “ASF” format.
78
00:00:00 000KB/095KB
Options
Back
Camera
• The sound can be recorded with a video clip if the microphone is turned on. The default
setting of the microphone is set to “On”. To record a video clip without the sound, turn
off the microphone. For details, see “Recording Video Clips with the Sound” on page 82.
Recording Close-up Video Clips
1. In video camera mode, set the macro switch to the macro position (
2. Press
or the side-down key to start recording the video clip.
To cancel macro mode, set the macro switch to the normal position (
).
).
Sending Video Clips
“Camera”
1. Press
.
Press the camera key in the viewer position of the display.
2. To stop recording, press
.
To view the preview before saving, select “Preview”.
3. Select “Save and Send”.
Select the desired way you wish to send.
For details, see “Creating a New Message” on page 85.
Note
• You can send video clips only when “For Message” is selected for the recording time. For
details, see “Selecting the Recording Time” on page 81.
79
Camera
Using the Zoom Function
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a or b.
Adjusting the Exposure
“Camera” → [Options] → “Video Settings” → “Exposure”
1. Press a (Bright) or b (Dark).
Picture brightness (exposure level) indicators
: (Bright → Normal → Dark)
Once the phone has returned to the stand-by screen, the brightness settings return to default.
Mobile Light
You can record a video clip in various colour modes.
“Camera” → [Options] → “Video Settings” → “Mobile Light” → “Light Colour”
1. Select the desired light colour.
Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue/Disco
80
Camera
To Change the Mobile Light Mode
Set the mobile light according to your purpose.
“Camera” → [Options] → “Picture Settings” → “Mobile Light” → “Switch On/
Off”
1. Select the desired mode.
“On” ( ):
The light is always on.
“Auto” ( ):
The light turns on if the phone detects that the conditions are dark.
“Off”:
The light is always off.
The corresponding indicator is displayed on the screen. Select “Off” to turn it off.
Selecting the Recording Time
“Camera” → [Options] → “Video Settings” → “Record Time”
1. Select “Extended Video” or “For Message”.
For Message:
Limits the size to send a message depending on service providers.
Extended Video:
Less than 30 minutes (depending on the memory).
Note
• If you select “For Message” for the recording time, the file size is limited depending on
the service provider. Therefore, the quality is also limited for the setting.
• “Save and Send” is not displayed after recording in the Extended Video mode.
• When you select “Extended Video”, you can select the video format from “QCIF or
SubQCIF” or “QVGA(MPEG4)”.
81
Camera
Switching to the Photo Camera Mode
You can switch to the digital camera mode. You can also switch to the photo camera mode
by pressing c.
“Camera” → [Options] → “Go to Photo Camera”
Selecting Video Quality
“Camera” → [Options] → “Video Settings” → “Video Quality”
1. Select the desired video quality.
Video quality indicators
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger file size is needed.
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone needs to be activated.
“Camera” → [Options] → “Video Settings” → “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting. Select “Off” to record a video
clip without the sound.
82
Camera
Tip
• The file size of a video clip can be reduced if the sound is not recorded.
Changing the Picture Size
You can change the picture size during playback/recording.
“Camera” → [Options] → “Advanced” → “Picture Size”
1. Select “Large(QCIF)” or “Small(SubQCIF)”.
Selecting the Storage Memory
You can select the location to save the recorded video clips.
“Camera” → [Options] → “Advanced” → “Save New Videos to”
1. Select the desired location from “Handset Memory”, “Memory Card” or “Choice”.
Note
• If you select “Choice”, select the desired location every time you save.
83
Camera
To Use the Help Function
“Camera” → [Options] → “Help”
Video Encoding
“Camera” → [Options] → “Advanced” → “Video Encode”
1. Select the appropriate format.
Exiting from the Viewer Position of the Display
Carry out the following operation when you want to go back from the viewer position of the
display to the normal position.
1. Press and hold the cancel key in the viewer position.
84
Messages (M 4)
Messages
Create New
Inbox
Drafts
Templates
Sent
Outbox
Messenger
Your phone allows you to send and receive text, multimedia and email, and receive WAP
alerts as well.
MMS
MMS allows you to send and receive multimedia messages of up to 300 KB with images,
sound, or video clips attached.
Select
Back
Note
• Some MMS functions may not always be available depending on your network.
Contact your network operator for more information.
• Maximum message size varies depending on the settings by the network operator.
SMS
SMS allows you to send text messages of up to 765 characters long. If you send a message
more than 160 characters, it is split into several segments.
Messages
Messenger
Voice Mail
Cell Broadcasts
Area Info
Settings
Memory Status
Select
Back
Email
Email allows you to send messages of up to 300 KB.
Creating a New Message
(For Email)
A → “Create New” → “E-mail”
(MMS/SMS)
A → “Create New” → “Message”
1. Enter the message.
85
Messages
2. (Email/MMS)
Press [Options] and select “Insert Item”, if you wish to attach files.
3. (Email/MMS)
Select the desired item. Details are given in the following sections.
“Pictures”:
Attaches picture files.
“Sounds”:
Attaches sound files.
“Videos”:
Attaches video clip files.
“Attach Contact”:
Attaches Contacts List entries.
“Attach Appointment”: Attaches Schedule entries.
4. Select “Send”.
5. (MMS)
Enter or select the email address or phone number from the Contacts List.
(SMS)
Enter or select the phone number from the Contacts List.
(Email)
Enter the email address from the Contacts List.
To add multiple email addresses or phone numbers (up to 20), highlight the recipient
field, press [Options], select “Edit & Add Recipients”, then select “Add Recipient”.
Enter or select the email address or phone number, or select from the existing Contacts List.
Up to 20 digits (MMS/SMS) or 128 characters (Email/MMS) can be entered for each
email address or phone number.
To change the recipient types, press [Options], select “Edit Recipients” and select
“Change to TO”, “Change to CC” or “Change to BCC” (Email/MMS).
86
Messages
6. (Email/MMS)
Select the subject field and enter the subject.
7. (MMS/SMS)
Transportation type (SMS or MMS) is shown in the field of “Message Type”.
Select the field and select the desired transportation type.
8. Select “Advanced” to set the advanced message sending options.
• “Delayed Delivery” (“No delay”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1
week”) (MMS):
Sets the time the message is delivered after the Send key is pressed.
• “Delivery Report” (“Yes”, “No”) (MMS/SMS):
Enables or disables Delivery Report when the message is successfully sent to the
recipient.
• “Expiry Time” (“Never delete”, “30 minutes”, “1 hour”, “6 hours”, “1 day”, “1 week”)
(SMS/MMS):
Sets Expiry Time for a message to be saved in the server.
• “Priority” (“High”, “Normal”, “Low”):
Prioritises composed messages.
• “Read Report” (“Yes”, “No”) (MMS/SMS):
Enables or disables Read Report when the recipient is required to inform the sender
that the message has been read.
9. Highlight “Send”, then press
to send.
After the message is sent, the message is moved to the Sent box.
87
Messages
Note
• The current message size displayed while you are creating the message is an
approximation.
• If a message cannot be sent for some reason, the message stays in the Outbox and the
“ ” is displayed during stand-by.
Tip
• To save the message without sending, select [Options] and select “Save to Drafts” in step
2.
• You can send the following items attached to multimedia messages. Details are given in
the following sections.
• My Items data
• Contacts List entry
• File (Schedule entry created by Calendar, Contacts List entry), etc.
• You can use the template option to help you compose messages. For details on using this
option, see “Using Templates” on page 55.
To Attach My Items Data
1. In step 3 in “Creating a New Message” on page 85, select from “Pictures”,
“Sounds” or “Videos”.
88
Messages
2. Select the desired file.
If you wish to take new pictures, record sounds or video clips, select “Take Picture”,
“Record Sound” or “Record Video”.
• (For pictures)
For attached pictures, select the appropriate resize option, as the maximum
message size for sending varies depending on the network operator.
• (For sounds)
For attached sounds, select the appropriate format option, as the maximum
message size for sending varies depending on the network operator.
To Attach a Schedule Entry
1. In step 3 in “Creating a New Message” on page 85, select “Attach Appointment”.
2. Select the desired day including a schedule entry you wish to add.
3. Select the desired schedule entry.
To Add Information from a Contacts List Entry
1. In step 3 in “Creating a New Message” on page 85, select “Attach Contact”.
2. Select the desired entry.
If you wish to select your own Contacts List entry, select “My Contact Details”.
3. Select the desired field.
The selected information is entered.
89
Messages
To Add a Slide Show
1. In step 2 in “Creating a New Message” on page 85, select “Options” and select
“Add Slide”.
If you wish to add more slides, select “Add Slide Before” or “Add Slide After”.
2. Enter the message.
If you wish to set the duration of each slide, press [Options] and select “Slide duration”,
then select the desired duration.
Tip
• You can create messages up to 300 KB. Each slide can contain one picture and/or one
sound file or video clip.
To Remove or Replace Attachments
1. In step 3 in “Creating a New Message” on page 85, press [Options] and select the
corresponding remove option for each attachment.
Sending a Message in the Drafts Box
A → “Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Select “Send”.
5. Highlight “Send”, then press
to send.
90
Messages
Reading MMS
Messages you receive are saved in the Inbox.
To View Messages Before Downloading
The MMS indicator ( ) is displayed when you are receiving an incoming message.
A → “Inbox”
1. Select the message alert you wish to view.
Tip
• The volume varies depending on the Application Volume settings (p. 143). The sound is
deactivated when “Application Volume” is set to “Silent”.
Storing the Phone Number of a Sender in the Contacts List
A → “Inbox”
1. Highlight the message from which you wish to store the phone number or email
address.
2. Press [Options] and select “Save address”.
The new Contacts List entry screen including the phone number is displayed. For details
on creating a new Contacts List entry, see “Add New Contact” on page 59.
Calling the Phone Number of a Sender Embedded in the Message
A → “Inbox”
1. Highlight the message including the phone number you wish to dial.
2. Press [Options] and select “Call Sender”.
91
Messages
Downloading a Single MMS
A → “Inbox”
1. Highlight the message alert ( ) you wish to download.
2. Press [Options] and select “Download”.
The downloading starts and the indicator becomes
.
Tip
• You can download multiple messages at the same time. See the next section.
Downloading Multiple MMS
A → “Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alert using the “Select/Unselect” or “Select All” option.
4. Select “Download”.
The selected messages are downloaded at the same time.
Replying to a Message or to All Addresses
A → “Inbox”
1. Highlight the message the sender of which you wish to reply to.
2. Press [Options] and select “Reply” or “Reply all”.
3. Enter the message.
4. Press “Send”.
5. Highlight “Send” then press
92
to send.
Messages
Forwarding a Message
A → “Inbox”
1. Highlight the message you wish to forward.
2. Press [Options] and select “Forward”.
3. Perform steps 2 to 9 in “Creating a New Message” on page 85.
Remote Forward
You can transfer your email messages saved in the mail server directly to other recipients.
A → “Inbox”
1. Highlight the message alert ( ) you wish to transfer.
2. Press [Options] and select “Forward”.
3. Perform steps 2 to 5 in “Creating a New Message” on page 85.
Locking or Unlocking the Messages
A → “Inbox”
1. Highlight the message you wish to lock or unlock.
2. Press [Options] and select “Advanced”.
3. Select “Lock/Unlock”.
93
Messages
Sending a Picture File with Postcard
Your phone allows you to send multimedia messages to a Vodafone specific Postcard
service centre that prints the picture and mails it to the recipient’s home address specified
in the MMS message. (Your phone is initially provided with the address of a Vodafone
specific Postcard service centre, and its address cannot be changed.)
Note
• This service is not available with some service providers. Please contact your service
provider for more information.
To Create a New Postcard
A→ “Create New” → “live! Postcard”
1. Select a picture you wish to send.
2. Enter your message.
3. Press [OK].
4. Enter the following information for the recipient.
See the note below for details.
• “Name”
• “Additional Information”
• “Address”
• “City”
• “Post Code”
• “County”
• “Country”
• “Send Postcard”
94
Messages
5. Press [Options] and select “Send”.
Note
• The items “Name”, “Address” and “City” are necessary to complete sending Postcards.
• Information for a recipient
“Name” (mandatory):
Name of the recipient for a postcard up to 50 characters
“Additional Information” (optional):
Additional information of the recipient up to 50 characters
“Address” (mandatory):
Street and number up to 50 characters
“City” (mandatory):
City up to 50 characters
“Post Code” (optional):
Postal code up to 20 characters
“County” (optional):
State, province and region up to 50 characters
“Country” (optional):
Country up to 20 characters
• The items displayed differ according to the service. Please contact your service provider
for more information. The item “Country” may not be displayed, so you cannot send
Postcards overseas from your phone.
• Files in Animation GIF format cannot be used for the Postcard service.
• The picture quality of Postcards varies depending on the picture size.
95
Messages
Cell Broadcasts (M 4-10)
You can receive cell broadcast messages or general messages such as weather forecasts
and traffic reports. This information is broadcast to subscribers in certain network areas.
This function may not be available on all mobile phone networks. Contact your network
operator for more information.
Enabling/Disabling Cell Broadcasts
“Messages” → “Cell Broadcasts” → “Switch On/Off”
1. Select “On” or “Off”.
Reading Cell Broadcast Messages
“Messages” → “Cell Broadcasts” → “Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press [Back].
Setting Languages
You can select your preferred language for the cell broadcast message display.
“Messages” → “Cell Broadcasts” → “Settings” → “Language”
The current language is displayed.
1. Press
.
The language list is displayed.
96
Messages
2. Select the desired language.
3. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
“Messages” → “Cell Broadcasts” → “Settings” → “Set Info Subjects” →
[Options]
1. Select “Add/Remove”.
2. Select the desired page.
3. Press [Back].
Tip
• If the desired page is not in the list that appears in step 2, select “Create Subject” in step
1, then enter the subject code to add a page. For details on the subject code, contact your
service provider.
97
Messages
Area Info (M 4-11)
The Area Info is the message information that operators send to subscribers in certain
areas.
When you receive Area Info, the message (area code) is displayed during stand-by.
Note
• This function may not be available on all mobile phone networks. Contact your network
operator for more information.
Enabling/Disabling Area Info
“Messages” → “Area Info”
1. Select “On” or “Off”.
Note
• If Area Info is set to “On”, the stand-by time will decrease.
Setting Up MMS/SMS/Email (M 4-12)
General Settings
“Messages” → “Settings” → “General Settings”
1. Select the item you wish to set up.
• “Home Download” (“Always download”, “Always defer”):
Controls message download timing inside your network area.
“Always download”: Downloads messages immediately from the server.
“Always defer”:
Defers message download.
98
Messages
• “Roam. Download” (“Always download”, “Always defer”):
Controls message download timing when roaming outside of your network.
“Always download”: Downloads messages immediately from the server.
“Always defer”:
Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Read Report”:
Enables or disables Read Report request.
• “Expiry Time”:
This indicates the number of days and hours for which a message you send may
remain undelivered to the message recipient. During this period, the message
service centre will continually try to deliver the message to the recipient.
Select the validity period.
• “Delivery Rep. Allow”:
Enables or disables Delivery Report when receiving a message, which applies to the
Delivery Report function.
• “Auto Delete” (“None”, “Inbox”, “Sent”, “Both”):
Deletes the oldest message automatically, when the Inbox, Sent or both (Inbox and
Sent) is full.
• “Edit Signature”:
Opens the screen to enter the signature.
• “Reply History” (“Yes”, “No”):
Disables or enables whether the message will be added to your reply message or not.
99
Messages
SMS Settings
“Messages” → “Settings” → “SMS Settings”
1. Select the item you wish to set up.
• “Message Centre”:
Enter the centre phone number.
If you wish to enter a country code for a message to an international number, press
and hold Q until a + sign is displayed.
• “Reply Path”:
Accepts or rejects the same reply path with the send path when receiving the reply
message for your message.
• “Message Format”:
Select the message format to be used when creating a new message.
• “Optimisation”:
When set “On” (default), double-byte characters such as European characters with
an accent are converted into single-byte characters and sent.
When “Off”, double-byte characters are sent as displayed.
Please note that you may be charged double for double-byte characters sent in an
SMS when Optimisation is set “Off”.
Select “On” or “Off”.
100
Messages
MMS Settings
“Messages” → “Settings” → “MMS Settings”
1. Select the item you wish to set up.
• “Slide Duration”:
Sets the duration of the slide.
• “Max Message Size”:
Defines the maximum size of messages that are downloaded.
• “Creation Mode” (“Free”, “Restricted”):
When set to “Free”, you can attach files of any format to the mail. When set to
“Restricted”, only certain formats can be attached.
Email Settings
“Messages” → “Settings” → “Email Settings”
1. Select the item you wish to set up.
• “Download Interval”:
Sets the download interval.
• “Max Message Size”:
Defines the maximum size of messages that are downloaded.
101
Vodafone live! (M 2)
Your phone is already configured to access Vodafone live! and the mobile internet*.
Vodafone live! is a new mobile internet portal which is your gateway to a new world of
information, games, music and services.
Because your phone uses 3G (UMTS), it has a system that is much faster than previous ways
of getting mobile information. Also, the connection is ‘always on’ which means there is no
need to wait for dialling up. You only have to pay for the data you send or receive, not how
long you’re connected.
* If you have problems getting connected, please phone Vodafone Customer Support.
Your phone contains a WAP browser used for surfing on the Mobile Internet, where you can
get a lot of useful information. Normally, pages are designed for a mobile phone.
Your phone is already setup to Vodafone site for WAP/MMS Settings.
102
Vodafone live!
Starting the WAP Browser
1. Press C during stand-by.
To Exit the WAP Browser
1. Press F to exit the browser.
Navigating a WAP Page
• a b c d:
Move the highlights around in the screen.
•
:
Executes the option displayed in the lower centre of the screen.
• A:
Launches the browser option menu.
• C:
Selects an action displayed in the lower right of the screen.
Used to access “Vodafone live!” by opening the browser.
• F (short press):
Exits the browser.
(press and hold):
Turns off the phone.
103
Vodafone live!
Browser Menu
To Edit Favourites
C → [Options] → “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
“Select”:
Selects a bookmark.
“Details”:
Displays detailed information of the WAP page.
“Send page”:
Sends the URL address to recipients.
“New”:
Creates new folders or bookmarks.
“Rename”:
Renames bookmarks.
“Edit URL”:
Edits URL address of the bookmarks.
“Move”:
Moves Bookmarks to another location.
“Delete”:
Deletes bookmarks.
“Delete All”:
Deletes all bookmarks.
104
Vodafone live!
The Browser Options
You can use various options of the WAP browser.
C → [Options]
“Select”:
Selects a WAP page.
“Home”:
Goes to the homepage.
“Bookmarks”:
(See page 104.)
“Mark Page”:
Marks the selected WAP page.
“Save items”:
Saves items from WAP pages.
“Go to URL”:
Goes to the WAP page that you enter the URL address.
“Access History”:
Shows the history where you have browsed.
“Forward”:
Goes to the next page of the pages displayed.
“Reload Page”:
Reloads the WAP page again to get new information.
“Advanced”:
Displays the advanced menus.
“Exit”:
Exits the browser.
The Advanced Options
C → [Options] → “Advanced”
“My Saved Page”:
Displays the bookmarked pages.
“Save this page”:
Saves the WAP page as the local file.
“Send page”:
Sends the WAP page data.
“Details”:
Shows detailed information of the WAP page.
“Browser Data”:
Edits the browser data. You can clear the cache/cookies/
history.
“Search This Page”:
Searches specific words in the WAP page.
105
Vodafone live!
“Alert Inbox”:
“Copy Text”:
“Settings”:
“Restart browser”:
“About”:
Displays WAP Push alerts.
Copies the text on the web page.
Displays the Settings menus.
Restarts the browser.
Displays the browser information.
Browser Settings
C → [Options] → “Advanced” → “Settings”
“Send Referrer”:
Enables or disables the notification of the referrer.
“Cookies”:
Adjusts the setting of cookies.
“Downloads”:
Categorises downloading data from the images/sounds/
objects.
“Security”:
Adjusts the security prompt level.
“IMEI Notification”:
Enables or disables the notification of mobile phone
identification.
“Scroll step”:
Sets the speed of scrolling.
“Font Size”:
Sets the size of the browsing font.
106
Media Player (M 3)
Media Player can play sound files and video clip files by switching between two applications:
Music Player and Video Player. These applications can handle files in MP4 and 3gp (video
clip, sound) format. While playing back sound files in the background, you can use other
menus.
Switching between Music Player and Video Player
When you start the Media Player for the first time, the Music Player is started.
“Media Player”
The list of the last-launched player (All Videos or All Music) is displayed.
1. When the desired playlist is not displayed, press [Options] and select “Open Video”
or “Open Music”.
2. Select “Handset Memory” or “Memory Card”.
Music Player
Playing Back Sound Files
“Media Player”
1. Select the desired file.
To pause playback, press
.
Note
• You are asked whether or not to play sounds when the Silent mode is activated.
107
Media Player
Tip
• You can return to the Main menu screen while playing back the file in the background.
• You can create your playlist listing only the desired files (p. 110).
• You can make tone adjustment in step 1. Press [Options] and select “Tone Control”.
Select from “Normal” or “Bass”.
• You can select the playback pattern in step 1. Press [Options] and select “Playback
Pattern”.
“Normal”:
“Repeat”:
“Repeat All”:
“Random”:
Plays back all files in the selected folder once and stops playback.
Continues to play back the selected file.
Plays back all files in the selected folder.
Plays back files in the selected folder at random.
Searching a File to Be Played Back
“Media Player”
1. Press [Options] and select “Search”.
2. Enter the first few letters of the title.
Search results are displayed in alphabetical order and the matching file is highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Media Player”
1. Highlight the file you wish to add to the playlist.
108
Media Player
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist, see “Adding a New Playlist”
on page 110.
3. Select the desired folder.
4. Press
.
The file highlighted in step 1 is saved.
To delete the playlist, highlight the playlist and press [Options]. Then select “Delete
Playlist”.
Streaming
You can play back sound files while downloading them from the mobile network.
You can also register the address of the Web site as a bookmark.
“Media Player”
1. Press [Options] and select “Streaming”.
2. Select from “Enter URI”, “Favourites” or “Access Log”.
“Enter URI”: Enter the desired address of the Web site. The browser opens, starts
downloading and plays back.
“Favourites”: The address of the Web site is registered.
“Access Log”: Shows the logs of the Web site you accessed. From the log you can
start streaming.
109
Media Player
Adding a New Playlist
“Media Player”
1. Press [Options] and select “Open Music”.
2. Select “Handset Memory” or “Memory Card”.
3. Press [Options] and select “Add New Playlist”.
4. Enter the desired playlist name.
5. Press
.
Video Player
Playing Back Video Clip Files
“Media Player”
1. Select the desired file.
To pause playback, press
.
To stop playback, press C.
Tip
• You can create your playlist listing only the desired files (p. 112).
110
Media Player
Searching a File to Be Played Back
“Media Player”
1. Press [Options] and select “Search”.
2. Enter the first few letters of the title.
Search results are displayed in alphabetical order and the matching file is highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Media Player”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a playlist, see “Adding a New Playlist”
on page 112.
3. Select the desired folder.
4. Press
.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the playlist and press [Options]. Then select
“Delete from Playlist”.
111
Media Player
Streaming
You can play back video clip files while downloading them from the mobile network.
You can also register the address of the Web site as a bookmark.
“Media Player”
1. Press [Options] and select “Streaming”.
2. Select from “Enter URI”, “Favourites”, “Access Log” or “Display Size”.
“Enter URI”: Enter the desired address of the Web site. The browser opens, starts
downloading and plays back.
“Favourites”: The address of the Web site is registered.
“Access Log”: Shows the logs of the Web site you accessed. From the log you can
start streaming.
“Display Size”: Select the display size when playing back video clip files.
Adding a New Playlist
“Media Player”
1. Press [Options] and select “Open Video”.
2. Select “Handset Memory” or “Memory Card”.
3. Press [Options] and select “Add New Playlist”.
4. Enter the desired playlist name.
5. Press
.
112
Media Player
Editing the Video Clip File
“Media Player”
1. Select the file you wish to edit.
2. Press [Options] and select “Edit”.
3. Select the desired option.
“Crop”:
“Subtitle”:
Select the desired area to be cropped.
Create a subtitle to add to the file.
Backlight
“Media Player”
1. Select the file the backlight of which you wish to adjust.
2. Press [Options] and select “Settings”.
3. Select “Backlight:”.
4. Select from “Always On”, “Always Off” or “Normal Settings”.
“Always On”:
Lit while the file is played back.
“Always Off”:
Unlit while the file is played back even if a key is pressed.
“Normal Settings”: Works with the backlight setting (p. 178).
113
My Items (M 6)
My Items contains several types of picture, sound and video clip data. Also included in My
Items are frequently used text message phrases and accessed WAP pages (addresses)
which you can use. You can also transmit picture, sound and video clip data via infrared or
Bluetooth wireless technology to OBEX-enabled phones.
My Items
Pictures
Videos
Sounds & Ringtones
Games & More
Bookmarks
My Saved Page
Text Templates
Select
Back
My Items
Videos
Sounds & Ringtones
Games & More
Bookmarks
My Saved Page
Text Templates
Other Documents
Select
114
Back
My Items
Pictures (M 6-1)
Pictures that are taken by a digital camera or images that are downloaded from mobile
Internet sites can be managed. You can register pictures in the following formats: JPEG,
PNG, WBMP and GIF.
Pictures
Get new
04-09-30_09…
01/01/00 00:00
20KB
04-09-30_09…
01/01/00 00:00
5KB
04-09-30_09…
01/01/00 00:00
Options
8KB
Back
Viewing Pictures
“My Items” → “Pictures”
1. Select the file you wish to view.
The selected picture is displayed.
Switching the Memory Source
“My Items” → “Pictures”
1. Press d.
The tab switches and the list is displayed from the memory card. To go back to the
handset memory, press c.
2. Select the picture file you wish to view.
Using Images as Wallpaper
“My Items” → “Pictures”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
115
My Items
Saving an Image to Contacts List Entries
You can use this option only for pictures saved in the handset memory.
“My Items” → “Pictures”
1. Highlight the file you wish to add to Contacts List.
2. Press [Options] and select “Add to Contact”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Add New Contact” on page 59.
Editing Pictures
“My Items” → “Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Picture Editor”.
3. Select the desired option.
Note
• The size of pictures that you can retouch is 52 dots [W] × 52 dots [H] minimum.
116
My Items
Adjusting the Size
You can adjust the picture to an appropriate size depending on the scene.
“My Items” → “Pictures”
1. Highlight the file you wish to adjust the size of.
2. Press [Options] and select “Resize”.
3. Select the desired option.
Each option resizes the picture for each use.
“To Wallpaper”
“Power On/Off”
“For Incoming Call”
“Alarm”
“Cut”
Note
• “Resize” may not be available depending on the original picture and copyright issued.
Sending a Picture File
“My Items” → “Pictures”
1. Highlight the file you wish to send.
2. Press [Options] and select “Send”.
3. Select the desired option.
For details on creating a message, see “Creating a New Message” on page 85.
117
My Items
Note
• The Postcard service is not available with some service providers. Please contact your
service provider for more information.
• Some pictures protected with a copyright may not be sent attached to a message.
Operating the Files
You can copy, move, sort, rename, and delete the saved pictures.
“My Items” → “Pictures”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
Select the desired option according to your purpose.
“Move”:
Moves the files to another folder. Select the desired folder to
move.
“Copy”:
Copies the file. Select the desired folder to copy.
“Create Folder”:
Creates a new folder.
Using Multiple Select
You can select more than one file for moving, copying and deleting.
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Pictures” → [Options] → “Advanced” → “Multiple Select”
1. Select the desired file names.
2. Press [Options] and select the desired menu.
If you select “Delete”, a confirmation message is displayed.
Tip
• To remove the check, select the file again or select “Unselect” in step 2.
• If you wish to select all files, select “Select All” in step 2. To unselect all, select “Unselect
All”. Then press [Options] to select the desired menu.
118
Pictures
04-09-30_09…
01/01/00 00:00
10KB
04-09-30_09…
01/01/00 00:00
5KB
04-09-30_09…
01/01/00 00:00
8KB
04-09-30_09…
01/01/00 00:00
Options
10KB
Back
My Items
To Sort the Files
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Pictures” → [Options] → “Advanced” → “Sort”
1. Select the desired order.
To Rename the File
“My Items” → “Pictures”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“My Items” → “Pictures”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the Picture Details
“My Items” → “Pictures”
1. Highlight the file of which you wish to view the detail information.
2. Press [Options] and select “Details”.
119
My Items
Uploading Picture Files
You can upload your pictures to the live! Studio.
Note
• This service is not available with some service providers. Please contact your service
provider for more information.
“My Items” → “Pictures”
1. Highlight the file you wish to upload.
2. Press [Options] and select “Send”.
3. Select “To live! Studio”.
Note
• Pictures protected with a copyright cannot be uploaded, with the exception of Separate
Delivery files.
Downloading Picture Files
“My Items” → “Pictures” → “Get new”
The picture file download site is displayed.
Tip
• For details on transmitting My Items data, see “Sending My Items Data” on page 134.
120
My Items
Videos (M 6-2)
Video clips that are recorded by a video camera or video clips that are downloaded from
mobile Internet sites can be managed.
Playing Back Video Clip Files
“My Items” → “Videos”
1. Select the file you wish to play back.
2. Press
.
To resume, press
again.
To stop playback, press [Back].
Switching the Memory Source
“My Items” → “Videos”
1. Press d.
The tab switches and the list is displayed from the memory card. To go back to the
handset memory, press c.
2. Select the video clip you wish to view.
Sending a Video Clip File
“My Items” → “Videos”
1. Highlight the file you wish to send.
2. Press [Options] and select “Send”.
3. Select the desired option.
For details on creating a message, see “Creating a New Message” on page 85.
121
My Items
Note
• Video clips protected with a copyright cannot be sent attached to a message, with the
exception of Separate Delivery files.
To Record a Video
You can record a video also from My Items.
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Videos” → [Options] → “Record Video”
The video camera application launches. To record a video, see “Recording Video Clips” on
page 78.
Operating the Files
You can copy, move, sort, rename, and delete the saved video clips.
“My Items” → “Videos”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
Select the desired option according to your purpose.
“Move”:
Moves the files to another folder. Select the desired folder to
move.
“Copy”:
Copies the file. Select the desired folder to copy.
“Create Folder”:
Creates a new folder.
122
My Items
Using Multiple Select
You can select more than one file for moving, copying and deleting.
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Videos” → [Options] → “Advanced” → “Multiple Select”
1. Select the desired file names.
2. Press [Options] and select the desired menu.
If you select “Delete”, a confirmation message is displayed.
Tip
• To remove the check, select the file again or select “Unselect” in step 2.
• If you wish to select all files, select “Select All” in step 2. To unselect all, select “Unselect
All”. Then press [Options] to select the desired menu.
To Sort the Files
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Videos” → [Options] → “Advanced” → “Sort”
1. Select the desired order.
To Rename the File
“My Items” → “Videos”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
123
My Items
To Delete the File
“My Items” → “Videos”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the Video Clip Details
“My Items” → “Videos”
1. Highlight the file of which you wish to view the detail information.
2. Press [Options] and select “Details”.
Uploading Video Clip Files
You can upload your video clips to the live! Studio.
Note
• This service is not available with some service providers. Please contact your service
provider for more information.
“My Items” → “Videos”
1. Highlight the file you wish to upload.
2. Press [Options] and select “Send”.
3. Select “To live! Studio”.
Note
• Video clips protected with a copyright cannot be uploaded, with the exception of Separate
Delivery files.
124
My Items
Downloading Video Clip Files
“My Items” → “Videos” → “Get new”
The video clip file download site is displayed.
Setting a Ring Video
You can set your video clip to play back when the phone rings.
“My Items” → “Videos”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
125
My Items
Sounds & Ringtones (M 6-3)
The downloaded sound files and the AMR data recorded by Voice Recorder are managed in
Sounds & Ringtones. The default ringtones are not contained within Sounds & Ringtones.
Only the sound files you can play back with the phone are stored in Sounds & Ringtones.
Playing Back Sound Files
“My Items” → “Sounds & Ringtones”
1. Select the file you wish to play back.
To stop playback, press
.
Note
• This option may not be available in all regions.
Switching the Memory Source
“My Items” → “Sounds & Ringtones”
1. Press d.
The tab switches and the list is displayed from the memory card. To go back to the
handset memory, press c.
2. Select the desired sound file.
126
My Items
Using the Sound Files as a Ringtone
“My Items” → “Sounds & Ringtones”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Note
• The formats that can be used for ringtones are SMAF, MIDI (SMF, SP-MIDI), MP3, MP4
and XMF. Other formats cannot be used.
Sending a Sound File
“My Items” → “Sounds & Ringtones”
1. Highlight the file you wish to send.
2. Press [Options] and select “Send”.
3. Select the desired option.
For details on creating a message, see “Creating a New Message” on page 85.
Note
• Sounds protected with a copyright cannot be sent attached to a message, with the
exception of Separate Delivery files.
127
My Items
Operating the Files
You can copy, move, sort, rename, and delete the saved sound files.
“My Items” → “Sounds & Ringtones”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
Select the desired option according to your purpose.
“Move”:
Moves the files to another folder. Select the desired folder to
move.
“Copy”:
Copies the file. Select the desired folder to copy.
“Create Folder”:
Creates a new folder.
Using Multiple Select
You can select more than one file for moving, copying and deleting.
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Sounds & Ringtones” → [Options] → “Advanced” → “Multiple
Select”
1. Select the desired file names.
2. Press [Options] and select the desired menu.
If you select “Delete”, a confirmation message is displayed.
Tip
• To remove the check, select the file again or select “Unselect” in step 2.
• If you wish to select all files, select “Select All” in step 2. To unselect all, select “Unselect
All”. Then press [Options] to select the desired menu.
128
My Items
To Sort the Files
Note
• The following procedure applies when the entries other than “Get new” are highlighted.
“My Items” → “Sounds & Ringtones” → [Options] → “Advanced” → “Sort”
1. Select the desired order.
To Rename the File
“My Items” → “Sounds & Ringtones”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“My Items” → “Sounds & Ringtones”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the Sound Details
“My Items” → “Sounds & Ringtones”
1. Highlight the file of which you wish to view the detail information.
2. Press [Options] and select “Details”.
129
My Items
Uploading Sound Files
You can upload your sounds to the live! Studio.
Note
• This service is not available with some service providers. Please contact your service
provider for more information.
“My Items” → “Sounds & Ringtones”
1. Highlight the file you wish to upload.
2. Press [Options] and select “Send”.
3. Select “To live! Studio”.
Note
• Sounds protected with a copyright cannot be uploaded, with the exception of Separate
Delivery files.
Downloading Sound Files
“My Items” → “Sounds & Ringtones” → “Get new”
The sound file download site is displayed.
130
My Items
Games & More (M 6-4)
Along with the preloaded application, downloaded applications are saved in Applications.
Using Applications
Various kinds of Vodafone specific applications can be used on this phone.
To use applications, download the applications via the mobile Internet.
Some applications offer the ability to connect to a network either within a game or a network
based application.
Note
• Applications may be both localised (no connectivity) and network based (using the mobile
Internet to update information/play games). The network may charge you more for using
network-based applications. Please contact your service provider for more information.
Downloading Applications
Confirmation Screen
Before downloading the application you are asked to confirm what you are about to receive.
After checking the information on the confirmation screen, the application can be
downloaded.
Note
• User authentication may be required before downloading the application on some
information screens.
131
My Items
Executing Applications
“My Items” → “Games & More”
Downloaded applications are sequentially displayed from the latest one.
1. Select the title of the application you wish to execute.
The selected application is executed. When using network connection type applications,
connection to the network can be selected.
2. To end the application, press F and select “End”.
To Set a Screensaver Application
“My Items” → “Games & More”
1. Highlight the desired screensaver application.
2. Press
.
The confirmation screen to set a screensaver is displayed.
3. Select [Yes].
132
My Items
More Games
“My Items” → “Games & More” → “More Games”
1. Select the application you wish to download.
The confirmation screen is displayed after various WAP browser screens.
2. Press
to start downloading.
3. Press
when finished.
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, and video clips have a digital copy protection program, which is
called DRM (Digital Rights Management). You need to activate the digital licence permission
to open the files. Files protected with DRM are displayed with
.
“My Items”
1. Select the desired menu from “Pictures”, “Sounds & Ringtones” or “Videos”.
2. Highlight the file you wish to activate.
3. Press [Options] and select “Activate”.
Note
• Some pictures with DRM may not open even when an attempt is made to activate it.
• Pictures with DRM cannot be sent attached to a message, with the exception of Separate
Delivery files.
133
My Items
Sending My Items Data
Choose the appropriate menu.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Send”.
3. Select “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 200.
For “Via Infrared”
For details, see “Infrared” on page 205.
Note
• Pictures/Sounds/Video clips protected with a copyright cannot be sent, with the exception
of Separate Delivery files.
• When pairing, you need to enter your passcode when establishing contact with a
Bluetooth wireless technology enabled device for the first time.
134
My Items
Receiving the My Items Data
When the phone receives the My Items data, a confirmation message is displayed during
stand-by.
1. Press [Yes].
The received data is saved in the corresponding My Items folder.
Tip
• For details on Infrared or Bluetooth wireless settings, see “Connectivity” on page 200.
Bookmarks (M 6-5)
You can store desired (or frequently used) pages (addresses) in Bookmarks. It can save you
time in accessing WAP pages. For details, see “Vodafone live!” on page 102.
“My Items” → “Bookmarks”
1. Select the page you wish to browse.
My Saved Page (M 6-6)
You can save the WAP page as a screenshot.
“My Items” → “My Saved Page”
1. Select the desired file to view.
135
My Items
Text Templates (M 6-7)
You can register up to 50 text templates for use in text messages and multimedia
messages. The maximum capacity of the text templates is 100 KB.
Adding Phrases to Text Templates
“My Items” → “Text Templates” → “Add New Template”
1. Enter the text and press
.
Editing Text Templates
“My Items” → “Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the text and press
.
Viewing Text Templates
“My Items” → “Text Templates”
The list of Text Templates is displayed.
1. Highlight the text template you wish to view.
2. Press [Options] and select “View”.
Deleting Text Templates
“My Items” → “Text Templates”
1. Highlight the text template you wish to delete.
2. Press [Options] and select “Delete”.
136
My Items
Sending Text Templates
“My Items” → “Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Other Documents (M 6-8)
Some types of files excluding picture files are stored in the Other Documents folder of the
phone. You can edit and use these files as My Items data.
Opening the Document File
“My Items” → “Other Documents”
1. Select the desired file.
Sending the Document File
“My Items” → “Other Documents”
1. Highlight the file you wish to send.
2. Press [Options] and select “Send”.
3. Select the desired option.
137
My Items
Operating the Files
You can copy, move, sort, rename, and delete the saved documents.
“My Items” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
Select the desired option according to your purpose.
“Move”:
Moves the files to another folder. Select the desired folder to
move.
“Copy”:
Copies the file. Select the desired folder to copy.
“Create Folder”:
Creates a new folder.
Using Multiple Select
You can select more than one file for moving, copying and deleting.
“My Items” → “Other Documents” → [Options] → “Advanced” → “Multiple
Select”
1. Select the desired file names.
2. Press [Options] and select the desired menu.
If you select “Delete”, a confirmation message is displayed.
Tip
• To remove the check, select the file again or select “Unselect” in step 2.
• If you wish to select all files, select “Select All” in step 2. To unselect all, select “Unselect
All”. Then press [Options] to select the desired menu.
138
My Items
To Sort the Files
“My Items” → “Other Documents” → [Options] → “Advanced” → “Sort”
1. Select the desired order.
To Rename the File
“My Items” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“My Items” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the Document Details
“My Items” → “Other Documents”
1. Highlight the file of which you wish to view the detail information.
2. Press [Options] and select “Details”.
139
Games & More (M 1)
Games (M 1-1)
The list of Java™ applications is displayed.
Downloaded applications are displayed in order starting from the latest one.
Executing Applications
For details on executing applications, see “Executing Applications” on page 132.
Setting Security Level
You can set the security level for selected Java™ applications.
“Games & More” → “Games”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Security Level”.
3. Select one of the following options:
“Network Access”:
“Messaging”:
“Auto Run”:
“Local Connection”:
“Read User Data”:
140
Sets security to access the network.
Sets security to perform MMS and SMS messaging.
Sets security to perform the Auto Run function.
Sets security to access local contents.
Sets security to read user data, such as Contacts List entries,
mailbox (Inbox) and My Items data.
Games & More
Games
Screensavers
Settings
Java™ Information
Select
Back
Games & More
“Write User Data”: Sets security to write entries in your phone, such as Contacts List
entries, mailbox (Inbox) and My Items data.
“Use Multimedia”: Sets security to use the barcode scanning function.
“Location Access”: Sets security to update the positioning function.
“Reset”:
Clears all the above settings.
4. Select one of the following options:
“Session”:
The confirmation message is not displayed until you exit the
application, while execution of the API of the specified function
group is authorised.
“Oneshot”:
The confirmation message is displayed every time the API of the
specified function group is executed.
“Blanket”:
The confirmation message is not displayed until the application is
deleted or you change the settings, while execution of the API of
the specified function group is authorised.
“No”:
Execution of the API of the specified function group is not
authorised.
Setting Network Access
In order to download Java™ applications, you need to set the network access.
“Games & More” → “Games” → [Options] → “Security Level” → “Network
Access”
1. Select “Session”, “Oneshot”, “Blanket” or “No”.
141
Games & More
Viewing Application Information
You can check the information of Java™ applications.
“Games & More” → “Games”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application from the handset memory.
“Games & More” → “Games”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Screensavers (M 1-2)
You can download screensaver applications for the stand-by screen.
Switching the Screensaver On or Off
“Games & More” → “Screensavers” → “Switch On/Off”
1. Select “On” or “Off”.
Note
• If you select “On” and a screensaver application is not set, a list displaying available
screensavers is displayed, asking you to make a selection.
142
Games & More
Set Applications
“Games & More” → “Screensavers” → “Set Applications”
The downloaded applications are displayed.
1. Select the desired screensaver application.
Settings (M 1-3)
Application Volume
You can set the volume of the application such as the sound effect to one of the five levels
or silent. When “Application Volume” is set to “Silent”, this setup has priority.
“Games & More” → “Settings” → “Application Volume”
The current volume level is displayed.
1. Press a (or d) to increase the volume or press b (or c) to decrease the volume
and then press
.
Backlight
“Games & More” → “Settings” → “Backlight” → “Switch On/Off”
1. Select from “Always On”, “Always Off” or “Normal Settings”.
“Always On”:
Lit while the application is operated. Blinks when the blink setting
is on.
“Always Off”:
Unlit while the application is operated even if a key is pressed.
“Normal Settings”: Works with the backlight setting (p. 178). Blinks when the blink
setting is on.
143
Games & More
To Set the Blinking Operation
This setting enables the backlight to be controlled by the application. If set to “Off”, the
backlight cannot be turned on from the application.
“Games & More” → “Settings” → “Backlight”→ “Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can choose whether the operation is enabled
or disabled.
When a SMAF file is specified in the application, you can operate the vibrator set in the
SMAF file.
Note
• SMAF (Synthetic music Mobile Application Format) is a music data format for mobile
phones.
“Games & More” → “Settings” → “Vibration”
1. Select from “On”, “Link to Sound” or “Off”.
When you set “Link to Sound”, the vibration is synchronised with the sound of SMAF file
in the application.
144
Games & More
Calls & Alarms
You can set the priority of incoming calls and alarms while an application is operating.
“Games & More” → “Settings” → “Calls & Alarms”
1. Select “Incoming Call”, “Video Call”, “Incoming Message” or “Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm Priority”:
The application is suspended automatically, and you can receive a call or a message, or
the alarm will sound. After finishing the call or the message, or the alarm ends, the
suspend indicator ( ) is displayed letting you know there is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the first line of the screen while the
application continues. If you press D, the application is suspended, and you can receive
a call or a message. After finishing the call or the message, the suspend indicator ( )
is displayed letting you know there is a suspended application.
Java™ Information (M 1-4)
The information about the licences belonging to Java™ is displayed.
145
Organiser (M 7)
Calendar (M 7-1)
Calendar allows you to easily schedule appointments or events, which are associated with
the date and time.
These entries can also be sent via infrared or Bluetooth wireless technology to a PC to share
the same schedules. When you exchange entries with other devices, the date and time
displayed may be different to that of the original data depending on the data format of the
receiving device.
Creating a New Entry
“Organiser” → “Calendar”
1. Select the desired day to which you want to add an event.
2. Select “Add New Entry”.
3.
4.
5.
6.
7.
8.
146
Enter the subject.
Enter the location.
Select the desired category.
Enter the start date and then enter the start time.
Select the duration.
Select the reminder time or date.
Organiser
9. Select “Repeat” and select the desired option.
10. Select “Description” and enter a memo for the schedule entry.
11. Select “Secret” and select “On” or “Off” to make it secret data.
12. Press [Save].
Note
• If the date and time settings have not been made, the date and time entry screen is
displayed (p. 180).
• The reminder will not sound when “Ringer Volume” (p. 169) is set to “Silent”.
Sending a Schedule Entry
“Organiser” → “Calendar”
1. Select the day including schedule entries you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 200.
For “Via Infrared”
For details, see “Infrared” on page 205.
Note
• When pairing, you need to enter your passcode when establishing contact with a
Bluetooth wireless technology enabled device for the first time.
147
Organiser
Receiving a Schedule Entry
When the phone receives a schedule entry, a confirmation message is displayed during
stand-by.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on making Infrared or Bluetooth wireless settings, see “Connectivity” on
page 200.
Viewing a Schedule Entry
“Organiser” → “Calendar”
1. Select the day you wish to view.
The daily view is displayed.
To Search By Date
1. In the monthly or daily view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter the desired date.
Editing a Schedule Entry
“Organiser” → “Calendar”
1. Select the day you wish to edit.
The daily view is displayed.
20.02.2005
Options
Select
Edit
Add New Entry
Send
Go to
Select
148
Back
Organiser
2. Press [Options] and select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In the monthly or daily view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view only):
Deletes the selected appointment.
“All This Day”: Deletes all entries for the selected day.
“All This Month” (monthly view only):
Deletes all entries for the selected month.
“Up to Last Month” (monthly view only):
Deletes all entries before this month.
“All Appointments” (monthly view only):
Deletes all entries in this application.
Viewing the Memory Status
1. In the monthly or daily view, press [Options] and select “Memory Status”.
The current memory status is displayed.
149
Organiser
Alarms (M 7-2)
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before setting the alarm function if it
has not been done already.
Note
• The alarm will not ring when “Ringer Volume” (p. 169) is set to “Silent”.
“Organiser” → “Alarms”
1. Select the blank setting.
2. Enter the desired time.
3. Select the repeat option.
To Change the Type of Alarm Tone
On the Set Alarm screen, select “Assign Tone/Video”.
Select “Assign Alarm Tone”.
1.
2.
3.
4.
150
Select “Preset Sounds” or “My Sounds”.
Select the desired tone.
For details on selecting a tone, see “Assigning a Ringtone” on page 170.
Organiser
To Change the Type of Video
1. On the Set Alarm screen, select “Assign Tone/Video”.
2. Select “Assign Alarm Video”.
3. Select the desired video.
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b (or c) to decrease the volume.
To Change the Vibration of Alarm Tone
1. On the Set Alarm screen, select “Vibration”.
2. Select “On”, “Link to Sound” or “Off”.
For details on selecting a vibration, see “Vibration” on page 173.
To Change the Duration of the Alarm Tone
1. On the Set Alarm screen, select “Duration”.
2. Select the desired duration.
151
Organiser
Resetting an Alarm Setting
“Organiser” → “Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarm Settings
“Organiser” → “Alarms” → “Clear All”
Calculator (M 7-3)
The calculator function performs the 4 arithmetic calculations using up to 12 digits.
“Organiser” → “Calculator”
The calculator is displayed on the display.
Key operations for calculation are as follows:
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press
.
To start a new calculation, press U.
152
Organiser
Rate Conversion
You can also use the calculator as a currency calculator to convert from/to a home currency
using a conversion rate that you enter.
To Set a Currency Conversion Rate
“Organiser” → “Calculator” → [Options] → “Currency Converter” → “Exchange
Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To delete a digit, press U.
To Convert a Value
“Organiser” → “Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
The result is displayed.
153
Organiser
Voice Recorder (M 7-4)
This allows you to record a voice clip, which can be used to remind you of schedule entries
or be sent within a multimedia message. The recorded voice clip is saved in Saved Sounds.
Voice clips are saved in .amr format.
Recording a Voice Clip
“Organiser” → “Voice Recorder”
1. Press
to start recording.
To stop recording before the recording time is over, press
2. Select “Save” to save the voice clip.
.
Note
• Press a (or the side-up key) or b (or the side-down key) to adjust the sound volume
when playing back the recorded file.
Sending Voice Clips
“Organiser” → “Voice Recorder”
1. Press
to start recording.
2. Press
to stop recording.
3. Select “Save and Send”.
For details on creating a message, see “Creating a New Message” on page 85.
154
Organiser
Viewing Record Time
“Organiser” → “Voice Recorder” → [Options] → “Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, you can save the voice clip only in a memory card
automatically.
Selecting Storage Memory
“Organiser” → “Voice Recorder” → [Options] → “Save Recording To”
1. Select the desired location.
When selecting “Choice”, you can select the location when saving a voice clip.
Scanner (M 7-5)
With the built-in digital camera, you can read texts and barcodes in Jan format and QR
codes, and create QR codes. The scanned data can be saved as a Contacts List entry, URL,
email address and text.
Note
• When scanning does not place it may be for one of the following reasons: type or size of
barcode, scratches, dirt, damage, print quality, light reflection, etc.
Reading Barcodes
“Organiser” → “Scanner” → “Scan Barcode”
1. Display the barcode using the external camera.
2. Press
.
The scanning starts and the scanned result is displayed.
155
Organiser
3. Select the desired option.
The options vary depending on the scanned data.
“Open Link”:
The browser opens the URL.
“Copy URL”:
The URL is copied.
“Send Massage”: The result is sent as SMS or MMS.
“Copy”:
The result is copied.
Using the Scanning Options
1. In the scanning mode, press [Options] and select the desired option.
“Scan”
“Saved Files”
“Continuous Scan”:
“Mobile Light”:
“Exposure”:
“Help”:
156
Scanning is performed.
The saved files are displayed.
The continuous scanning is turned on.
The mobile light is turned on or off.
The exposure is adjusted in the following steps: +2, +1, 0,
−1, −2.
The Help for using the scan function is displayed.
Organiser
Creating QR Codes
You can create QR codes using texts and My Items data.
“Organiser” → “Scanner” → “Create QR Code”
1. Select the desired option.
“Text Input”:
Create a QR code using the text you enter.
“My Items”:
Create a QR code using the My Items data.
2. Press
.
Creation of the barcode starts and is displayed on the screen.
3. Press
.
Scanner
Scan Barcode
Open Barcode
Create QR Code
Scan Text
Scanned Results
Select
Back
Tip
• You can save the QR code in PNG format. Press [Options] and select “Save”.
Scanning Texts
“Organiser” → “Scanner” → “Scan Text”
1. Display the text using the external camera.
2. When the bar under the scanned text is blue, press
.
The scanning starts and the scanned result is displayed.
3. Press a or b to select the desired text.
4. Press
.
157
Organiser
5. Press [Options] and select the desired option.
“OK”:
“Select/Edit”:
“Change Mode”:
The scanned result is in the text entry screen.
The scanned result can be modified.
The scanned result can be converted to a web address, mail
address, phone number or to roman text.
Using the Scanning Options
1. In the scanning mode, press [Options] and select the desired option.
“Scan”:
“Saved Files”:
“Reversed Text”:
“Mobile Light”:
“Exposure”:
“Help”:
Scanning is performed.
The saved files are displayed.
Select the desired option from “Auto”, “Normal” or
“Reversed”.
The mobile light is turned on or off.
The exposure is adjusted in the following steps: +2, +1, 0,
−1, −2.
The Help for using the scan function is displayed.
Deleting the Scanned Data
“Organiser” → “Scanner” → “Scanned Results”
1. Highlight the data you wish to delete.
2. Press [Options] and select “Delete”.
158
Organiser
Renaming the Scanned Data
“Organiser” → “Scanner” → “Scanned Results”
1. Highlight the data you wish to rename.
2. Press [Options] and select “Rename”.
Checking the Information of the Scanned Data
“Organiser” → “Scanner” → “Scanned Results”
1. Highlight the data the information of which you wish to check.
2. Press [Options] and select “Information”.
Stopwatch (M 7-6)
You can store 4 lap times when using the stopwatch function.
“Organiser” → “Stopwatch”
1. Press
to start.
Press [LAP] to view the lap time before the stopwatch stops. Last 4 lap times are saved.
2. Press
to stop.
Tip
• You can save a record of lap time and stop time in Text Templates by pressing [Options]
and selecting “Save to Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and select “Reset”.
159
Organiser
Tasks (M 7-7)
You can register your schedule as task entries which are associated with the date and time.
Creating a New Entry
“Organiser” → “Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and then due time.
4. Select the reminder option.
When selecting “Other”, enter the desired reminder date and time.
5. Select “Description” and enter a memo for the task entry.
6. Select “Secret” and select “On” or “Off” to make it a secret data.
7. Press [Save].
Note
• If the date and time settings have not been made, the date and time entry screen is
displayed (p. 180).
Setting the Alarms
You can set the alarm at a specified time on the entry.
“Organiser” → “Tasks”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Reminder” and select “Reminder Time”.
4. Select the desired reminder time.
160
Organiser
To Change the Type of Alarm Tone
On the Reminder screen, select “Assign Tone/Video”.
Select “Assign Tone”.
1.
2.
3.
4.
Select “Preset Sounds” or “My Sounds”.
Select the desired tone.
For details on selecting a tone, see “Assigning a Ringtone” on page 170.
To Change the Type of Video
1. On the Reminder screen, select “Assign Tone/Video”.
2. Select “Assign Video”.
3. Select the desired video clip file.
To Change the Duration of Alarm Tone or Video
1. On the Reminder screen, select “Duration”.
2. Select the desired duration.
Editing the Task Entry
“Organiser” → “Tasks”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Modify the entry.
161
Organiser
Sending a Task Entry
“Organiser” → “Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select the desired option.
“As Message”:
“Via Bluetooth”:
“Via Infrared”:
Sends the entry as a message.
Sends the entry through Bluetooth connection.
Sends the entry through Infrared connection.
For “Via Bluetooth”
For details, see “Bluetooth” on page 200.
For “Via Infrared”
For details, see “Infrared” on page 205.
Note
• When pairing, you need to enter your passcode when establishing contact with a
Bluetooth wireless technology enabled device for the first time.
Viewing the Memory Status
“Organiser” → “Tasks”
1. Highlight the task entry you wish to view the memory status of.
2. Press [Options] and select “Memory Status”.
The current memory status is displayed.
162
Organiser
Deleting Entries
“Organiser” → “Tasks” → [Options] → “Delete”
1. Select the desired option.
“This Task”:
Deletes the selected entry.
“All Completed Tasks”: Deletes all checked entries.
“All Tasks”:
Deletes all entries.
World Clock (M 7-8)
Setting the Time Zone
“Organiser” → “World Clock”
1. Press [Edit].
2. Select “Set Time Zone”.
The current time zone is indicated on the world map.
3. Press c or d to change the time zone.
4. Press
.
To Set the Custom Time Zone
“Organiser” → “World Clock”
1. Press [Edit].
2. Select “Set Time Zone”.
The current time zone is indicated on the world map.
3. Press [Options] and select “Set Custom Zone”.
4. Enter the desired city name and time.
163
Organiser
Setting the Daylight Saving
“Organiser” → “World Clock”
1. Press [Edit].
2. Select “Daylight Saving”.
3. Select “On” or “Off”.
Countdown Timer (M 7-9)
“Organiser” → “Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press
to start counting.
3. Press
to pause.
Press
again to continue counting.
4. If the countdown has finished, press [Cancel] and then press
countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and select “Edit”.
2. Modify the desired time.
164
to start the
Organiser
Expenses Memo (M 7-10)
You can record an expenses memo with predefined or edited categories.
Recording in the Expenses Memo
“Organiser” → “Expenses Memo” → “Add New Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals
“Organiser” → “Expenses Memo” → “Totals”
Recorded expenses are displayed on the screen.
To Change Amount
1. In the total view, select the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item
1. In the total view, select the desired item.
2. Press [Options] and select “Delete Item”.
The selected item is deleted from the list.
165
Organiser
To Delete All Items
1. In the total view, select the desired item.
2. Press [Options] and select “Delete All”.
Editing the Category Name
“Organiser” → “Expenses Memo” → “Edit Category”
1. Select the desired category name.
2. Modify the name.
Phone Help (M 7-11)
You can view the help list and use it to guide you in the phone’s functions.
“Organiser” → “Phone Help”
1. Press a or b.
166
SIM Application (M 9)
You can refer to the information on the SIM/USIM. Contact your service provider for further
details.
167
Settings (M 12)
Profiles (M 12-1)
The tone sound and vibration settings can be customised for each profile according to your
environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”, “Headset” and “Silent”.
Activating a Profile
“Settings” → “Profiles”
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator described on page 29 is displayed
during stand-by.
Settings
Profiles
Display Settings
Sound Settings
Time & Date
Language
Call Settings
Video Call Settings
Select
Tip
• Press and hold R to switch Profiles settings between the mode most recently activated
and Silent mode during stand-by.
Customising Profiles
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select the setting you wish to customise and change as desired.
For details on settings, see pages 169 to 174.
Settings
Time & Date
Language
Call Settings
Video Call Settings
Security Settings
Memory Settings
Master Reset
Select
168
Back
Back
Settings
Resetting Profile Settings
“Settings” → “Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
Ringer Volume
You can adjust the ringer volume to one of six levels or to an increasing volume.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
The current volume level is displayed.
4. Press a (or d) to increase the ringer volume or press b (or c) to decrease the
ringer volume and then press
.
To select “Increasing Volume”, press a (or d) at level 5.
To select “Silent”, press b (or c) at level 1.
169
Settings
Tip
• You can select from two levels or an increasing volume, when selecting the “Silent”
profile.
Assigning a Ringtone
You can select the ringtone from 28 tones including 5 patterns,13 sound effects and 10
melodies. You can also select a sound in Saved Sounds as the default ringtone excluding
the AMR or WAVE format.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3.
4.
5.
6.
7.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Call”.
Select “Assign Tone”.
Select “Preset Sounds” or “My Sounds”.
Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select “Play”.
8. Press [Options] and select “Assign”.
170
Settings
Note
• Even if you delete a ringtone that uses a sound in Saved Sounds, the setting remains the
same and the default ringtone sounds. If you delete a ringtone assigned for the ringtone,
the default ringtone is set.
Assigning a Ring Video Clip File
You can select a video clip file in Saved Videos as the default ring video clip file.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3.
4.
5.
6.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Call”.
Select “Assign Video”.
Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
7. Press [Options] and select “Select”.
171
Settings
Message Notification
When receiving messages, your phone will notify you of their arrival with the ringtone or ring
video you specify.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds” or “My Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video, see “Assigning a Ringtone” on
page 170 or “Assigning a Ring Video Clip File” on page 171.
7. Press [Options] and select “Assign” (for a ringtone) or “Select” (for a video clip).
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration.
Keypad Tones
When the keypad tone is set on, you will hear a confirmation tone each time you press any
keys.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
172
Settings
3.
4.
5.
6.
Select “System Sounds”.
Select “Keypad Tones”.
Highlight the desired tone pattern.
Press [Options] and select “Assign”.
Vibration
When the vibrator option is set on, the phone will vibrate for incoming calls regardless of the
ringer volume and ringtone settings.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “On”, “Link to Sound” or “Off”.
Tip
• When the “Link to Sound” option is selected in step 4, the vibrator synchronises with your
selected melody to pulse in time with the melody. Please note that not all melodies
support the “Link to Sound” option.
• When you select “On” or “Link to Sound” in step 4, “ ” is displayed during stand-by.
173
Settings
External Light Colour
You can select from 7 colours and 1 pattern for each profile and change it during an
incoming call.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “External Light”.
4. Select “For Voice Call”, “For Video Call” or “For New Message”.
5. Select the desired colour or “Off”.
Tip
• If you select “Disco” in step 5, all 7 colours flash in order during an incoming call.
Any Key Answer
You can answer a call by pressing any key except F,
see page 37.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
174
, U and [Busy]. For details,
Settings
Setting the Display (M 12-2)
You can change the settings of the display.
Wallpaper
For the stand-by screen, 5 pictures are provided.
Pictures taken with the digital camera or images downloaded from a WAP site can be used
for wallpapers.
Setting My Pictures
“Settings” → “Display Settings” → “Wallpaper”
1. Select “My Pictures”.
2. Select the desired picture.
3. After displaying the picture, press
.
Note
• Some pictures cannot be used because of their picture and data types.
• If the picture in My Pictures is already set, it is displayed in step 1. Press [Change] and
select the desired picture.
175
Settings
Assigning the Pictures
Pictures can be displayed when turning the power on or off, when receiving an incoming
call, or when operating the alarm.
Pictures taken with the digital camera or images downloaded from a WAP site can be used.
To Set Built-in Pictures
“Settings” → “Display Settings” → “System Graphics”
1. Select the desired scene to set the picture to.
2. Select “Preset Animation” when you select “Power On” or “Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you select “Incoming Call” or
“Alarm” in step 1.
To Set My Pictures
“Settings” → “Display Settings” → “System Graphics”
1. Select the desired scene to set the picture to.
2. Select “My Pictures”.
3. Select the desired picture.
4. After displaying the picture, press
.
5. Specify the area you wish to display using the navigation keys.
Note
• Some pictures cannot be used because of their picture and data types.
• If the picture in My Pictures is already set, it is displayed in step 2. Press [Change] and
select the desired picture.
176
Settings
Setting the Font Weight
You can change the font weight displayed on the screen.
“Settings” → “Display Settings” → “Font Settings”
1. Select “Thin”, “Normal”, “Bold” or “Bolder”.
The preview image is displayed in the selected weight.
Setting the Greeting Message
You can set the message which is displayed when the phone is turned on.
“Settings” → “Display Settings” → “Greeting Message” → “Switch On/Off”
1. Select “On” or “Off”.
2. Select “Edit Message” and enter the message when you select “On” in step 1.
Up to 10 characters can be saved as a message.
Showing the Clock
You can display the calendar or the current date and/or time during stand-by.
To Set the Clock Display
“Settings” → “Display Settings” → “Clock & Calendar” → “Show Clock”
1. Select the desired clock type or “Off” to set clock display off.
Tip
• When you select “Calendar”, you can display one or two consecutive calendars by
selecting “1 month” or “2 months”.
177
Settings
Backlight
The backlight will shut off if you do not press the keypad for a certain length of time. You
can specify a desired time to elapse before the backlight shuts off, which will help conserve
battery life.
Tip
• When you purchase this phone, Backlight is set to 15 seconds.
To Select the Backlight Time Out
“Settings” → “Display Settings” → “Backlight”
1. Select the desired time.
Select “Off” to shut it off.
Adjusting the Brightness of the Backlight
You can adjust the brightness of the backlight of the screen between 4 levels.
“Settings” → “Display Settings” → “Brightness”
1. Press a (Light) and b (Dark) for maximum clarity.
2. Press
.
178
Settings
Setting the Display Saving
The screen of this phone will automatically turn off after a given amount of time. You can
change the length of time before the Display Saving goes into effect, which will help
conserve battery life.
Tip
• When you purchase this phone, Display Saving is set to 2 minutes.
“Settings” → “Display Settings” → “Display Saving”
1. Select the desired time.
Note
• Display Saving does not work while you are making a call, using WAP, or using an
application.
• To cancel the Display Saving: The display saving continues until either a key is pressed
or there is an incoming alert. The first key press only cancels this function. You must
press another key in order to enter any numerical or text value.
Sound Settings (M 12-3)
You can use this menu to check or edit the current Profiles settings (except “Any Key
Answer”).
179
Settings
Time & Date (M 12-4)
You need to set the correct time and date in order for your phone’s various time-based
functions to work correctly.
“Settings” → “Time & Date” → “Set Date/Time”
1. Enter the day, month and year using the digit keys.
2. Enter the time using the digit keys.
Tip
• When you enter the time in the 12-hour format, press a or b to switch between am
and pm. The order in which the date and time is displayed is based on the format setting.
Selecting the Time Format
“Settings” → “Time & Date” → “Time Format”
1. Select “24 Hour” or “12 Hour”.
Selecting the Date Format
“Settings” → “Time & Date” → “Date Format”
1. Select from “D.M.Y”, “M-D-Y” or “Y/M/D”.
Setting the Daylight Saving
“Settings” → “Time & Date” → “Daylight Saving”
1. Select “On” or “Off”.
180
Settings
Setting the Time Zone
“Settings” → “Time & Date” → “Set Time Zone”
1. Press c or d to select the home city to set.
2. Press
.
Customising the Time Zone
“Settings” → “Time & Date” → “Set Time Zone” → [Options] → “Set Custom
Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between – and +.
3. Press
.
Setting the Calendar Format
“Settings” → “Time & Date” → “Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
181
Settings
Language Setting (M 12-5)
You can change the language that the phone uses to display messages.
“Settings” → “Language”
1. Select the desired language.
Tip
• You can also change the input language on the text entry screen (p. 53).
Note
• If you select “Automatic” in step 1, the language preset on the SIM/USIM card is selected.
• If the language preset on the SIM/USIM card is not supported, then the default language
of the phone is selected.
Call Settings (M 12-6)
Set various types of functions and services for voice calls.
Diverts
Note
• This service may not be available on all mobile phone networks. Contact your network
operator for more information.
This service is used to divert incoming calls to your voice mail system or to another phone
number depending on certain conditions in which you cannot answer a call.
182
Settings
To Divert Calls
“Settings” → “Call Settings” → “Diverts”
1. Select one of the following options:
“All Calls”:
Diverts all calls without ringing.
“When Busy”:
Diverts incoming calls when you are talking on the phone.
“No Answer”:
Diverts incoming calls if you do not answer a call within a certain
period of time.
“Not Reachable”: Diverts incoming calls when your phone has no network service or
is switched off.
“Cancel All”:
Clears all the above settings.
If you select “No Answer”, go to step 5.
2. Select “On”.
3. Enter a phone number to which you wish to divert calls or search for it in the
Contacts List (p. 61).
4. Press
.
5. Select the period of time from 6 levels (05 to 30 seconds).
Note
• When a divert is set to “Voice calls” of “All Calls”, “
” is displayed during stand-by.
Tip
• If you select “By Service” in step 2, you can select further divert options.
183
Settings
To Check the Divert Status
“Settings” → “Call Settings” → “Diverts”
1. Select the divert option you wish to check.
2. Select “Status”.
Call Waiting
Note
• This service may not be available on all mobile phone networks. Contact your network
operator for more information.
If you wish to be able to receive another incoming call while you have a call in progress, you
must activate the Call Waiting service.
“Settings” → “Call Settings” → “Call Waiting”
1. Select “On”, “Off” or “Status”.
Showing Your Phone Number
This lets you control whether to show your phone number when calling another party or not.
“Settings” → “Call Settings” → “Show Your Number”
1. Select “On”, “Off” or “Status”.
Note
• Some networks do not support this service. Please check with your service provider for
availability.
184
Settings
Call Information
With this setting On, the information of an incoming call is displayed.
“Settings” → “Call Settings” → “Display Call Info”
1. Select “On” or “Off”.
Restrict Calls
This function lets you place restrictions on incoming and outgoing calls. To activate this
option you will need the specified password, which is available from your service provider.
“Settings” → “Call Settings” → “Restrict Calls”
1. Select from one of the following options:
“Outgoing Calls”:
Restricts outgoing calls.
“Fixed Dialling No.”:
Restricts calls for fixed dialling numbers in the Contacts List.
“Incoming Calls”:
Restricts incoming calls.
“Rejected Numbers”:
You can register for dialling numbers to be restricted.
“Withheld Call”:
Restricts withheld calls.
“Change N/W Password”: Changes the network password.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls except emergency calls.
“Bar International Calls”: Restricts all outgoing international calls.
“Only Local & Home”:
Restricts all outgoing international calls except to your home
country.
185
Settings
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”:
Restricts all incoming calls when you are outside of the
coverage from your registered network operator.
3. Select one of the following options:
(For “Outgoing Calls” and “Incoming Calls”)
“All Services”:
Restricts all services.
“Voice Calls”:
Restricts all voice calls.
“Video Calls”:
Restricts all video calls.
“Fax”:
Restricts all fax calls.
“Messages”:
Restricts all messages.
“All except msgs”:
Restricts all services except messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings” → “Call Settings” → “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
186
Settings
Fixed Dialling No.
When the Fixed Dialling No. is enabled, you can only call pre-registered numbers.
To Enable Fixed Dialling No.
“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.” →
“Switch On/Off”
1. Select “On” to enable this function.
To Add a New Name
“Settings” → “Call Settings” → “Restrict Calls” → “Fixed Dialling No.” → “Edit
Dial List”
1. Highlight the blank entry, press [Options], then select “Add New Dial”.
2. Enter your PIN2 code.
3. Add a name and a phone number.
For details on adding a name and a phone number, see “Add New Contact” on page 59.
4. Press [Save].
Rejecting an Incoming Call
You can register phone numbers you do not wish to answer.
To Reject the Registered Number
“Settings” → “Call Settings” → “Restrict Calls” → “Rejected Numbers” →
“Switch On/Off”
1. Select “On” or “Off”.
187
Settings
To Register the Rejected Number
“Settings” → “Call Settings” → “Restrict Calls” → “Rejected Numbers” → “Set
Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Changing the Network Password
“Settings” → “Call Settings” → “Restrict Calls” → “Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter the password again.
.
4. Press
Minute Minder
Minute Minder function informs you of your talk time by sounding a tone after every minute.
“Settings” → “Call Settings” → “Minute Minder”
1. Select “On” or “Off”.
Displaying Call Timer
“Settings” → “Call Settings” → “Display Call Timer”
1. Select “On” or “Off”.
Auto Redial
“Settings“ → “Call Settings“ → “Auto Redial”
1. 1. Select “On” or “Off”.
188
Settings
Video Call Settings (M 12-7)
Set various types of functions and services for video calls.
Selecting an Image for the Alternative Image
You can select your image to be sent through the internal camera from the saved picture
files.
Selecting the Picture Quality
Select the desired incoming data format for your environment.
“Settings” → “Video Call Settings” → “Picture Quality”
1. Select from “Normal”, “Quality Prio.” or “Frame Rate Prio.”.
Select “Frame Rate Prio.” to perform faster communication.
Backlight
With this setting On, the phone’s backlight is on when making a video call.
“Settings” → “Video Call Settings” → “Backlight”
1. Select “On”, “As Normal Setting” or “Off”.
The “As Normal Setting” option depends on the backlight setting of the display (p. 178).
Mute
You can mute the microphone while making a video call.
“Settings” → “Video Call Settings” → “Mute Microphone”
1. Select “Unmute Microphone” to cancel the mute.
189
Settings
Assigning Hold Guidance Picture
You can display an image saved in the phone on your display while you are putting a call on
hold.
“Settings” → “Video Call Settings” → “Hold Guidance Pict”
1. Select “Preset Picture” or “My Pictures”.
2. Select the desired picture.
190
Settings
Security (M 12-8)
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the PIN code each time the phone is
switched on. Your PIN code is registered on the SIM/USIM card and you should have been
made aware of the code when you purchased the SIM/USIM card. Contact your service
provider for further details.
“Settings” → “Security Settings” → “PIN Entry” → “Switch On/Off”
1. Select “On” to enable the PIN code or “Off” to disable.
2. Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2, the SIM/USIM card will lock. To
remove the lock, contact your service provider/SIM/USIM card vendor.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/USIM card. Before you change
the PIN code, select “On” in step 1 in “Enabling/Disabling the PIN Code”.
“Settings” → “Security Settings” → “PIN Entry” → “Change PIN”
1. Enter the existing PIN code.
2. Enter a new PIN code.
3. Enter the new PIN code again.
191
Settings
Changing the PIN2 Code
The PIN2 code is used to protect certain functions in the phone such as Fixed Dialling No.
and call cost limits. The following shows you how to change the PIN2 code.
“Settings” → “Security Settings” → “Change PIN2”
1. Enter the existing PIN2 code.
2. Enter a new PIN2 code.
3. Enter the new PIN2 code again.
Handset Lock
The Handset Lock is an additional security feature which prevents unauthorised use of the
phone or certain features.
“Settings” → “Security Settings” → “Handset Lock”
1. Select “On” or “Off”.
2. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code”.
To Change the Handset Code
Before you change the handset code, select “On” in step 1 in “Handset Lock”.
“Settings” → “Security Settings” → “Change Handset Code”
1. Enter the old handset code.
2. Enter a new handset code.
3. Enter the new handset code again.
192
Settings
Phone Lock
By setting this option on, your phone will lock the keypad until the correct handset code is
entered.
“Settings” → “Security Settings” → “Phone Lock”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
To Turn Off the Phone Lock
Enter your handset code during stand-by to turn the Phone Lock off.
Showing Secret Data
By setting this option on, the hidden data can be displayed.
“Settings” → “Security Settings” → “Show Secret Data”
1. Select “On” to display or “Off” to hide.
193
Settings
Memory Settings (M 12-9)
Viewing the Memory Status
“Settings” → “Memory Settings” → “Memory Status”
1. Select from “Handset” or “Memory Card”.
The memory status of the selected item is displayed.
Formatting Memory Card
“Settings” → “Memory Settings” → “Format Card”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
2. Press [Yes] to start formatting.
Master Reset (M 12-10)
You can reset M5 and M12 settings or all settings from M1 to M12 and all created data.
Resetting M5 and M12 Settings
“Settings” → “Master Reset” → “Reset Settings”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
194
Settings
Resetting All Settings from M1 to M12
“Settings” → “Master Reset” → “Reset All”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
195
Call Log (M 11)
The phone will record the last 10 missed calls, received calls and dialled numbers.
Viewing Call Log
“Call Log”
1. Select from “All Calls”, “Dialled Numbers”, “Missed Calls” or “Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press
.
Tip
• You can also confirm call logs by pressing D during stand-by.
Sending Messages
1. In the call log list, highlight the call log you wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New Message” on page 85.
Note
• The Postcard service is not available with some service providers. Please contact your
service provider for more information.
196
Call Log
All Calls
Missed Calls
Received Calls
Dialled Numbers
Call Timers
Call Costs
Select
Back
Call Log
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete”.
Call Timers (M 11-5)
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All Calls
“Call Log” → “Call Timers”
1. Select “Received Calls” or “Dialled Numbers”.
The duration of the last call and all calls is displayed.
Resetting Call Timers
“Call Log” → “Call Timers” → “Clear Timers”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
197
Call Log
Call Costs (M 11-6)
This function lets you check the charges for your calls. Some networks do not support
Charging Advice. Please check with your service provider for availability.
Checking the Cost of the Last Call
“Call Log” → “Call Costs” → “Last Call”
The cost of the last call is displayed.
Checking the Total Call Cost
“Call Log” → “Call Costs” → “All Calls”
The cost of all calls is displayed.
Setting the Charge Rate
Set the charge rate to calculate the call cost and set the maximum limit for call cost.
“Call Log” → “Call Costs” → “Cost Units” → “Set Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press R.
198
Call Log
Setting the Charge Limit
This function is useful if you wish to make sure you do not exceed a certain charge limit.
“Call Log” → “Call Costs” → “Max Cost” → “Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
Checking the Residual Credit
“Call Log” → “Call Costs” → “Residual Credit”
Resetting All Call Costs
“Call Log” → “Call Costs” → “Clear Costs”
1. Enter your PIN2 code.
199
Connectivity (M 10)
By configuring the settings in this menu, you can connect to Bluetooth wireless technology
or infrared enabled phones via these connections, as well as a PC via Bluetooth wireless
technology or infrared connections.
Bluetooth (M 10-1)
For using the Bluetooth wireless function, you need to search for other Bluetooth wireless
technology enabled devices to establish contact with your phone. Keep your phone within a
distance of 10 metres before searching.
Connectivity
Bluetooth
Infrared
Network Settings
Internet Settings
Backup/Restore
Using the Bluetooth Wireless Function
To Turn On or Off
“Connectivity” → “Bluetooth” → “Switch On/Off”
1. Select “On” or “Off”.
The Bluetooth wireless setting is activated, and “ ” is displayed.
To Show or Hide Your Phone
“Connectivity” → “Bluetooth” → “Visibility”
1. Select the desired visibility settings.
“Show My Phone”:
Allows other devices to recognise your phone.
“Hide My Phone”:
Hides your phone from other devices.
200
Select
Back
Connectivity
To Search for Devices to be Paired
“Connectivity” → “Bluetooth” → “Search for Devices”
The phone starts searching for devices within 10 metres. A maximum of 16 devices can be
searched for and listed on the displayed.
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• If the Bluetooth wireless function is off before searching, the phone turns the Bluetooth
wireless function on automatically and starts searching.
• You can only select one device for pairing. To change the paired device, see “Handsfree
Devices”.
Handsfree Devices
You can activate, rename and delete the paired handsfree device in the list.
To Activate a Device
“Connectivity” → “Bluetooth” → “Handsfree Devices”
1. Select the device you wish to activate.
201
Connectivity
Tip
• You can save battery power by turning the Bluetooth wireless function off while it is not
in use. Turn the Bluetooth wireless function off in “To Turn On or Off” on page 200 or in
“To Turn Off Automatically” on page 204.
• During a call, you can divert voice calls to the paired device. Press [Options] and select
“Enable Bluetooth” or “Disable Bluetooth”. If you wish to disconnect the paired device,
select “Off”.
To Rename a Device
“Connectivity” → “Bluetooth” → “Handsfree Devices”
1. Highlight the device you wish to rename.
2. Press [Options] and select “Change Name”.
3. Rename the device.
To Clear a Device Name
“Connectivity” → “Bluetooth” → “Handsfree Devices”
1. Highlight the device you wish to clear.
2. Press [Options] and select “Delete”.
202
Connectivity
Paired Devices
You can rename and delete the paired device in the list.
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Highlight the desired device.
2. Press [Options].
3. Select “Change Name” or “Delete”.
You can rename or delete by pressing
after selecting desired device.
To Send All Data to Other Devices
You can send all the data for applications such as Contacts List, Calendar, Tasks or etc. to
selected devices.
“Connectivity” → “Bluetooth” → “Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
2. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
3. Enter the device passcode for unpaired devices.
4. Select the desired data to send.
Note
• If the handsfree device is connected, the confirmation screen to deactivate the handsfree
function is displayed. Press [Yes] to deactivate.
203
Connectivity
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent other phones from recognising your
phone, turn the Bluetooth wireless function off automatically to save battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in other devices when your phone is
detected.
“Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically in the specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two modes; talking with the handsfree
kit or talking with the phone.
“Connectivity” → “Bluetooth” → “Bluetooth Settings” → “Handsfree Setting”
1. Select “Private mode” or “Handsfree mode”.
“Private mode”:
For talking with the handset
“Handsfree mode”: For talking with the handsfree kit
204
Connectivity
Infrared (M 10-2)
In order to use the infrared function, you need to search for other infrared enabled devices
to establish contact with your phone. Keep your phone within a distance of 20 centimetres
before searching. The infrared setting will return to off when no data is transmitted/received
via infrared communication.
Turning On or Off
“Connectivity” → “Infrared” → “Switch On/Off”
1. Select “On” or “Off”.
The infrared setting is activated, and “ ” is displayed.
Sending All Data
“Connectivity” → “Infrared” → “Send All”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
2. Select the desired data to send.
3. Enter the authorisation code.
Network Settings (M 10-3)
System Settings
To Select a System Automatically
Each time the power is turned on, your phone always performs the selected system.
205
Connectivity
“Connectivity” → “Network Settings” → “System Settings”
1. Select “Auto”.
To Set the System Manually
“Connectivity” → “Network Settings” → “System Settings”
1. Select “GSM”.
Network Settings
To Select a Network Automatically
Each time the power is turned on, your phone always tries to connect to the preferred
network.
If your phone is not connected to the network, you can perform the following immediately
to establish the preferred network connection.
“Connectivity” → “Network Settings” → “Network Settings” → “Select
Network” → “Automatic”
To Set the Network Manually
“Connectivity” → “Network Settings” →“Network Settings” → “Select
Network” → “Manual”
1. Select the desired network.
To Add a New Network
“Connectivity” → “Network Settings” → “Network Settings” → “Select
Network” → “Add New Network”
If there are no entries, press
and go to step 2.
If there is an entry, press
and perform the following steps.
206
Connectivity
1. Select “Add”.
2. Enter the country code.
Up to 3 digits code can be entered.
3. Enter the network code.
Up to 3 digits code can be entered.
4. Enter a new network name.
Up to 25 characters can be entered.
5. Select “Select network type”.
6. Select the desired network.
To Change the Position of a Network in the Preferred List
“Connectivity” → “Network Settings” → “Network Settings” → “Select
Network” → “Set Preferred”
1. Select the name of the network you wish to change the position in the list.
2. Select “Insert” to insert over the selected position or “Add to end” to insert at the
end.
To Delete a Network from the Preferred List
“Connectivity” → “Network Settings” → “Network Settings” → “Select
Network” → “Set Preferred”
1. Select the name of the network you wish to delete.
2. Select “Delete”.
207
Connectivity
To Cut the Network Connection
“Connectivity” → “Network Settings” → “Network Settings” → “Off Line Mode”
1. Select “On” or “Off”.
To Show the Network Information
“Connectivity” → “Network Settings” → “Network Settings” → “Network
Information”
Information about the operator name, package and services are displayed.
Internet Settings (M 10-4)
Note
• In normal operations, you do not need to change the settings.
• Internet settings have already been made in your phone depending on your network
operator. You may have restrictions on viewing, deleting, copying or modifying the
settings. Contact your network operator for details.
“Connectivity” → “Internet Settings” → “Proxy”
Proxy
“Proxy Name”:
“IP Address”:
“Access Point”:
“Home”:
“Port Number”:
“Authentication Type”:
“User Name”:
“Password”:
208
Proxy name (Unique name)
IP address
Access point
Home page URL
Port number (1-65535)
Authentication Type (“HTTP-BASIC” or “HTTP-DIGEST”)
User name for authentication
Password for authentication
Connectivity
“Connectivity → “Internet Settings → “Access Point”
Access Point
“Access Point Name”:
Access point name (Unique name)
“APN”:
APN setting
“Authentication Type”:
Authentication type (“NONE”, “PAP” or “CHAP”)
“User Name”:
User name for access point
“Password”:
Password for access point
“DNS”:
DNS setting
“Linger Time”:
Linger time setting
“Connectivity” → “Internet Settings” → “Re-Provisioning Settings”
Re-Provisioning Settings
“Execute Pending”:
Updates provisioning data.
“Connectivity” → “Internet Settings” → “Clear DNS Cache”
Clears the DNS cache.
“Connectivity” → “Internet Settings” → “White List”
White List:
“SMSC Address”:
“SM Originating Address”:
SMSC address
SM originating address
209
Connectivity
Application Settings
“Connectivity” → “Internet Settings” → “Application”
WAP Settings
“Profile Name”:
“Proxy”:
WAP profile name (Unique name)
Proxy setting for WAP
MMS Settings
“Profile Name”:
“Proxy”:
“Relay Server URL”:
MMS profile name (Unique name)
Proxy setting for MMS
MMS relay server
Email Settings
“Account Name”:
“POP3”:
“SMTP”:
“Access Point”:
“Email Address”:
Streaming Settings
“Profile Name”:
“Proxy Address”:
“Port Number”:
“Access Point”:
210
Email account name (Unique name)
Server name, user ID, password and port number for
POP3 server
Server name, user ID, password, port number for SMTP
server and SMTP Authentication
Access point for email
Email address
Profile name for streaming (Unique name)
Proxy address
Port number (1-65535)
Access point
Connectivity
To Activate the WAP/MMS/Email/Streaming Profile
“Connectivity” → “Internet Settings” → “Application”
1. Select from “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming
Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Activate”.
To Edit the WAP/MMS/Email/Streaming Profile
“Connectivity” → “Internet Settings” → “Application”
1. Select from “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming
Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Edit”.
4. Edit the desired item.
To Copy the WAP/MMS/Email/Streaming Profile
“Connectivity” → “Internet Settings” → “Application”
1. Select from “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming
Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Copy”.
4. Edit the new profile name.
211
Connectivity
To Delete the WAP/MMS/Email/Streaming Profile
“Connectivity” → “Internet Settings” → “Application”
1. Select from “WAP Settings”, “MMS Settings”, “Email Settings” or “Streaming
Settings”.
2. Highlight the desired profile.
3. Press [Options] and select “Delete”.
4. Press [Yes].
Backup/Restore (M 10-5)
With a memory card inserted in your phone, you can make backup files of Bookmarks, Text,
Contacts, Calendar and Tasks in the handset memory card to the memory card. You can
also restore the backup data from the memory card.
Making a Backup File on the Memory Card
“Connectivity” → “Backup/Restore” → “Backup”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the handset code, see “To
Change the Handset Code” on page 192.
2. Press [OK].
3. Select the desired item to backup.
212
Connectivity
To Backup All Files
“Connectivity” → “Backup/Restore” → “Backup”
1. Enter your handset code.
2. Press [OK].
3. Select “Select All”.
Restoring a Backup File
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
2. Press [OK].
3. Select the desired item.
4. Select the desired file to restore.
A confirmation message indicates deletion from the memory card is displayed on the
screen.
5. Press [Yes].
To Restore All Files
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
2. Press [OK].
3. Select “Select All”.
A confirmation message indicating deletion from the memory card is displayed on the
screen.
4. Press [Yes].
213
Connectivity
To Delete a Backup File
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
2. Press [OK].
3. Select the desired item.
4. Highlight the desired file.
5. Press [Options] and select “Delete”.
A confirmation message to delete the selected file is displayed on the screen.
6. Press [Yes].
214
Connecting 802SH to Your PC
You can use the following functions by connecting the 802SH to your PC using an infrared
port, USB port* or Bluetooth wireless technology port:
• 3G/GSM GPRS modem
• Handset Manager for 802SH
* Requires an optional USB data cable XN-1DC30 for USB port connection.
System Requirements
Operating System:
Windows® 98*, Windows® Me, Windows® 2000**, Windows® XP***
* Windows® 98 Second Edition, Windows® 98 Service Pack 1 with Internet Explorer 5.01
or later
** Service Pack 4
*** Service Pack 1a
Supported Software:
Microsoft® Outlook/Outlook Express
Interface:
Infrared port, USB port or Bluetooth wireless port
CD-ROM drive
215
Connecting 802SH to Your PC
3G/GSM GPRS Modem
You can use 802SH as a 3G/GSM GPRS modem to access the Internet from your PC.
Connect your phone to your PC via Bluetooth wireless technology or USB interface. Software
installation on your PC is required. For details, see “Software Installation” on page 217.
Modem via the USB Cable
To use the modem function using a USB cable, use the cable mentioned above and see the
instructions accompanying the cable.
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless technology interface, see “Using the
Bluetooth Wireless Function” on page 200 and turn the modem function on.
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible while communicating with the Handset Manager
via Bluetooth wireless technology, infrared or USB interface.
• Your phone exhausts the battery when connected to a PC, even when not
communicating.
216
Connecting 802SH to Your PC
Handset Manager
You can transmit the following items between your phone and your PC, and can use
Contacts List entries on your PC:
• My Items files (pictures/sounds/video clips/Other Documents data)
• Contacts List entries
• Schedule entries
To use the Handset Manager function, see “Connecting 802SH to Your PC” on page 215
and set your phone to Data Transfer mode.
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Software Installation
1. Insert the supplied CD-ROM into your CD-ROM drive.
The 802SH CD-ROM screen is displayed.
If the 802SH CD-ROM screen is not displayed, double-click [Launcher.exe] in your
CD-ROM.
2. Press the desired button.
The installation starts.
3. Follow the on-screen instructions to complete installation.
217
Connecting 802SH to Your PC
Note
• The phone may not recognise the USB data cable if it is connected while an application
(Camera, My Items, etc.) is running. Connect the USB data cable during stand-by.
Infrared communication
• Infrared ports need to be aligned with each other.
• Infrared ports need to be placed within 20 cm of each other and within a 30° angle.
3G/GSM GPRS modem
• It is not recommended that you make or answer calls when you are using 802SH as a
3G/GSM GPRS modem. The operation may be interrupted.
Handset Manager
• Some large files may not be able to be transmitted from the PC to the phone.
• Applications (Camera, My Items, etc.) do not run when the phone is connected to the PC
via Bluetooth wireless technology interface, infrared port or USB data cable.
218
Infrared port
Troubleshooting
Problem
The phone does not turn on.
PIN code or PIN2 code is rejected.
The SIM/USIM card becomes locked.
Solution
•
•
•
•
•
•
Phone functions do not work after the
phone is turned on.
•
•
•
•
•
Calls cannot be made or received.
•
•
The display is difficult to read.
Call quality is poor.
•
•
Make sure the battery is properly inserted and charged.
Make sure you have entered the correct code (4 to 8 digits).
Your SIM/USIM card/protected functions will become locked after three unsuccessful attempts.
Contact your SIM/USIM provider if you do not have the correct PIN code.
Enter the PUK code (8 digits) provided by your service provider (if supported).
If the attempt is successful, enter the new PIN code and confirm your phone is operational again.
Otherwise contact your dealer.
Adjust the backlight brightness for the display.
Check the radio signal strength indicator as you may be outside the service area.
Check to see if any error message is displayed when you turn your phone on. If so, contact your dealer.
Make sure the SIM/USIM card is correctly inserted.
If the message “SIM card error” is displayed when the phone is switched on, you cannot use your SIM/
USIM card or the SIM/USIM card is damaged. Contact your dealer or network service provider.
Check your call barring, fixed dialling setting, remaining battery and call forwarding settings.
Check if your phone is currently performing data communication using Infrared (IrDA), Bluetooth wireless
technology interface or a USB data cable.
Check the remaining balance if you are using a pre-paid SIM/USIM card.
Your current location may not provide good call quality (i.e., in a car or train). Move to a location where
radio signal strength is greater.
219
Troubleshooting
Problem
Cannot access network service.
Cannot send or receive text message.
Cannot connect to Multimedia Messaging
Service provider.
Limited memory available.
Call is terminated unexpectedly.
No entries are displayed in the Contacts
List.
Fax transmission failure
Cannot receive OBEX data.
220
Solution
• Check where your account has been registered and where the service is available.
• Make sure you are correctly subscribed for the Short Message Service, that the network supports this
service, and that the centre number is set up correctly. If not, contact your network service provider.
• MMS settings and configuration may be missing or incorrect or the network does not support it. Check
your service provider’s access point number.
Contact your service provider to confirm the correct settings.
• Delete any unnecessary data.
• Magnetised objects such as health necklaces placed near the phone may terminate the call. Keep your
phone away from such objects.
• Confirm that the Contacts Location setting (Handset or SIM/USIM) is made correctly.
• Before transmitting fax data, configure your fax software to use the software flow control.
• Use of the optional data cable is recommended for transmitting fax data.
• The OBEX data can only be received only during stand-by. The message “Please return to stand-by.”
is displayed.
Safety Precautions and Conditions of Use
Your phone conforms to international regulations insofar as it is used under normal
conditions and in accordance with the following instructions.
CONDITIONS OF USE
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your phone may interfere with the
aircraft’s electronic systems). Current legislation forbids this use and legal action can be
taken against the user.
• Do not switch on your phone in a hospital, except in designated areas.
• Use of your phone’s function may affect the performance of medical electronic units
(pacemakers, hearing aids, insulin pumps, etc.). When the phone function is on, do not
bring it near medical equipment or into areas in which medical equipment is being used.
If you have a hearing aid or a pacemaker, only use the phone on the opposite side of your
body from where it is located. The phone should be kept at least 6 inches (15.24 cm)
from a pacemaker ANYTIME the phone is switched on.
• Do not switch on your phone near gas or flammable substances.
• Observe the rules concerning the use of mobile phones at gasoline stations, chemical
plants and at all sites where a risk of explosion exists.
221
Safety Precautions and Conditions of Use
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The product can only be repaired
by authorised service personnel.
• Do not drop your phone or subject it to severe impacts. Bending the body and pushing
the display or keys with extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry cloth.
• Do not carry your phone in your back pocket as it could break when you sit down. The
display is made of glass and is particularly fragile.
• Avoid touching the external connector on the underside of the phone, since the delicate
components within can be damaged by static electricity.
222
Safety Precautions and Conditions of Use
Battery
• Use your phone only with batteries, chargers and accessories recommended by the
manufacturer. The manufacturer disclaims any liability for damage caused by the use of
other chargers, batteries or accessories.
• Network configuration and phone usage will affect talk-time and stand-by
time.
Using the games or camera will hasten battery consumption.
• When the battery charging alert is displayed on the screen, charge the battery as
soon as possible. If you continue using your phone ignoring the alert, the phone may
cease to function, and all data and settings you have stored may be lost at any moment.
• Before removing the battery from the phone, make sure the phone is switched off.
• Replace and charge the new battery as soon as possible after removing the old one.
• Do not touch the battery terminals. Batteries can cause damage, injury or burns if a
conductive material touches exposed terminals. When the battery is detached from the
phone, use a cover made of non-conductive material for keeping and carrying the battery
safely.
• Recommended temperature for using and storing batteries is approximately 20°C.
• The batteries’ performance is limited in low temperatures, particularly below 0°C and the
phone may not work temporarily regardless of the amount of remaining battery power.
• Exposing the phone to extreme temperatures will shorten battery life.
223
Safety Precautions and Conditions of Use
• The battery can be charged and discharged hundreds of times but it will eventually wear
out. When the operating time (talk-time and stand-by time) is noticeably shorter than
normal, it is time to buy a new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 21.
Aerial Care
• Do not cover the top of the phone (p. 17, No. 20) with your hand when in use as this may
interfere with the performance of the built-in aerial. Call quality may deteriorate leading
to shortened talk-time and stand-by time because the mobile phone has to operate on a
higher power level than is necessary.
224
Safety Precautions and Conditions of Use
• Use only the aerial supplied or one approved by Sharp for your mobile phone. Using
unauthorised or modified aerials may damage the mobile phone. Moreover, since the
mobile phone may violate the appropriate regulations, it may lose performance or exceed
the limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of the mobile phone.
• While talking directly to the microphone, please hold the mobile phone so that the aerial
is upwards over your shoulder.
• To avoid interfering with blasting operations, please turn off the mobile phone in a
blasting area or in a place where a “turn off two-way radio” sign is posted.
225
Safety Precautions and Conditions of Use
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can become blurred. When taking
a picture, hold the phone firmly to prevent it from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear focusing. Wipe them off with a soft
cloth before taking a picture.
Others
• As with any electronic storage unit, data may be lost or corrupted under various
circumstances.
226
Safety Precautions and Conditions of Use
• Before connecting the phone with a PC or a peripheral unit, read the operation manual
for the other unit carefully.
• If the phone’s battery has been removed for some time, or the phone has been reset, the
unit’s clock and calendar may be reinitialised. The date and time should be updated in
this case.
ENVIRONMENT
• Keep your phone away from extreme heat. Do not leave it on the dashboard of a car or
near a heater. Do not leave it in any place that is extremely damp or dusty.
• Since this product is not waterproof, do not use it or store it where fluids such as water
can splash onto it. Raindrops, water spray, juice, coffee, steam, perspiration, etc. will also
cause malfunctions.
227
Safety Precautions and Conditions of Use
PRECAUTIONS CONCERNING VEHICLE USE
• It is the user’s responsibility to check the local laws governing the use of a mobile phone
in vehicles. Pay full attention to driving. Pull off to the side of the road, park the car, and
switch off the engine before making or answering a call.
• Use of your phone’s function may interfere with the vehicle’s electronic systems, such as
the ABS anti-lock brakes or the air-bag. To ensure no such problem occurs, please check
with your dealer or car manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel to install the vehicle accessories.
The manufacturer disclaims any liability for damage which may result as a consequence of
improper use or use contrary to the instructions contained herein.
228
Safety Precautions and Conditions of Use
SAR
Your Sharp mobile phone has been designed, manufactured and tested so as not to exceed
the limits for exposure to electromagnetic fields recommended by the Council of the
European Union. These limits are part of comprehensive guidelines developed by
independent scientific organisations. The guidelines include a substantial safety margin
designed to assure the safety of the phone user and others and to take into account
variations in age and health, individual sensitivities and environmental conditions. European
standards provide for the amount of radio frequency electromagnetic energy absorbed by
the body when using a mobile phone to be measured by reference to the Specific Absorption
Rate (SAR). The SAR limit for the general public is currently 2 watts per kilogram averaged
over 10 grams of body tissue. Your Sharp mobile phone SAR value is 0.686 watts per
kilogram. This has been tested to ensure that this limit is not exceeded even when the phone
is operating at its highest certified power. In use however your Sharp mobile phone may
operate at less than full power because it is designed to use only sufficient power to
communicate with the network.
229
Safety Precautions and Conditions of Use
PRECAUTIONS FOR USE IN USA
FCC Declaration of Conformity
This mobile phone 802SH with PC/Data interface cable XN-1DC30 complies with part 15 of
the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Responsible Party:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430
TEL: 1-800-BE-SHARP
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference cannot be
eliminated.
Information To User
This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
230
Safety Precautions and Conditions of Use
However, there is no guarantee that interference will not occur in a particular installation; if
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not
to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF energy for the general
population. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all persons,
regardless of age and health.
231
Safety Precautions and Conditions of Use
The exposure standard for wireless mobile phones employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests
for SAR are conducted using standard operating positions specified by the FCC with the
phone transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of
the phone while operating can be well below the maximum value. This is because the phone
is designed to operate at multiple power levels so as to use only the power required to reach
the network. In general, the closer you are to a wireless base station antenna, the lower the
power output.
Before a phone model is available for sale to the public, it must be tested and certified to
the FCC that it does not exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model. The highest SAR value
for this model phone when tested for use at the ear is 0.549 W/kg and when worn on the
body, as described in this user guide, is 0.326 W/kg. Body-worn Operation; This device was
tested for typical body-worn operations with the back of the phone kept 1.5 cm from the
body. To maintain compliance with FCC RF exposure requirements, use accessories that
maintain a 1.5 cm separation distance between the user’s body and the back of the phone.
The use of belt-clips, holsters and similar accessories should not contain metallic
components in its assembly.
The use of accessories that do not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided. While there may be differences between
the SAR levels of various phones and at various positions, they all meet the government
requirement for safe exposure.
232
Safety Precautions and Conditions of Use
The FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on
this model phone is on file with the FCC and can be found under the Display Grant section
of http://www.fcc.gov/oet/fccid after searching on FCC ID APYHRO00039.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular
Telecommunications & Internet Association (CTIA) web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile phones used by the public is
1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for the public and to account for
any variations in measurements.
233
Specifications and Optional Accessories
Specifications
Weight:
Dimensions (W × H × D):
Battery:
Approximately 141 g (with battery)
Approximately 50 × 102 × 26 mm (without protruding parts)
Lithium Ion, 3.7 V, 870 mAh
Optional Accessories
• Lithium Ion Battery (XN-1BT90)
• Cigarette Lighter Charger (XN-1CL30)
• USB Data Cable (XN-1DC30)
• AC Charger (XN-1QC30, XN-1QC31)
• External Antenna Cable (XN-1AT90)
• Audio Remote-Controller (XN-1AR90)
• Car Holder (XN-1CH90)
• Desktop Holder (XN-1DH90)
• Stereo Headset (XN-1HS90)
• Handsfree Microphone Unit (XN-1HU90)
The above accessories may not be available in all regions.
For details, please contact your dealer.
234
Index
Symbols
#/Flash Light Key 16
* /Shift Key 14
A
Alarms 150
Resetting 152
Setting 150
Area Info 98
Enabling/Disabling 98
B
Backup/Restore 212
Making a Backup File 212
Restoring a Backup File 213
Battery 20
Charging 22
Disposal 21
Inserting 20
Removing 21
Battery Cover 17
Battery Level Indicator 23
Bluetooth Wireless Function 200
Built-in Aerial 17
C
Calculator 152
Calendar
Creating 146
Deleting Schedule Entries 149
Editing a Schedule Entry 148
Receiving a Schedule Entry 148
Sending a Schedule Entry 147
Viewing a Schedule Entry 148
Viewing the Memory Status 149
Call Costs 198
Checking the Cost of the Last Call 198
Checking the Residual Credit 199
Checking the Total Call Cost 198
Resetting All Call Costs 199
Setting the Charge Limit 199
Setting the Charge Rate 198
Call Log 196
Deleting 197
Sending Messages 196
Viewing 196
Call Settings 182
Auto Redial 188
Call Information 185
Call Waiting 184
Changing the Network Password 188
Displaying Call Timer 188
Diverts 182
Fixed Dialling No. 187
Minute Minder 188
Rejecting an Incoming Call 187
Restrict Calls 185
Showing Your Phone Number 184
Call Timers 197
Checking the Duration of the Last Call
and All Calls 197
Resetting Call Timers 197
Camera (digital/video) 68
Adjusting the Exposure 70, 80
Auto Save 77
Changing the Picture Size 83
Continuous Shoot 73
Mobile Light 71, 80
Recording Close-up Video Clips 79
Recording Video Clips 78
Recording with Sound 82
Saving 76, 83
Selecting a Frame 74
Selecting the Picture Quality 75
Selecting the Picture Size 70
Selecting the Recording Time 81
Selecting the Scene 72
Selecting the Shutter Sound 75
Selecting Video Quality 82
Sending 69, 79
Switching to the Photo Camera Mode 82
Switching to the Video Camera Mode 74
Taking Close-up Pictures 69
Taking Pictures 68
Using the Timer 72
Using the Zoom Function 80
Viewing 80
Cell Broadcasts 96
Enabling/Disabling 96
Reading 96
Setting Languages 96
235
Index
Subscribing 97
Centre Key 14, 29
Characters 51
Changing the Input Languages 53
Changing the Input Mode 53
Using Templates 55
Clear/Back Key 15
Conditions of Use 221
Connectivity 200
Bluetooth 200
Infrared 205
Internet Settings 208
Network Settings 205
Contacts List 57
Assigning a Ringtone or a Ring Video
Clip 64
Changing the List 58
Changing the List Order 59
Changing the Name Order 58
Copying 61
Creating 59
Deleting 62
Dialling 61
Editing 62
Finding 61
Manage Group 63
Memory Status 65
Receiving 67
Selecting the Storage Memory 59
Sending 66
236
Setting in the Speeddial List 65
Speeddial List 65
Viewing My Contact Details 60
Countdown Timer
Editing the Countdown Time 164
D
Display 15
Adjusting the Brightness of the Backlight
178
Assigning the Pictures 176
Backlight 178
Setting My Pictures 175
Setting the Display Saving 179
Setting the Font Weight 177
Setting the Greeting Message 177
Showing the Clock 177
Wallpaper 175
Display Indicators 29
Display Position
Normal Position 32
E
Earpiece 14
Earpiece Volume 39
Emergency Calls 35
End/Power Key 15
Expenses Memo 165
Modifying the Category Name 166
Recording 165
Viewing Totals 165
External Camera 17
External Connector 17
F
Flash Light Key 16
Functions
Navigating 33
G
Games & More 140
Activating Files with Copyright
Protection (DRM) 133
Deleting an Application 142
Downloading 131
Executing 132
Java™ Information 145
More Games 133
Receiving 135
Sending 134
Setting Network Access 141
Setting Security Level 140
Settings 143
Switching the Screensaver On or Off
142
Using 131
Viewing Application Information 142
H
Handset Code 192
Handset Lock 192
Handsfree Microphone Connector 17
Index
I
M
Incall Menu (Video Call) 46
Changing the Image of Yourself 46
Muting the Microphone 46
Swapping Images 46
Turning the Speaker On and Off 47
Video Call Settings 47
Incall Menu (Voice Call) 39
Accessing SMS/MMS Menu during a
Call 40
Adjusting the Earpiece Volume 39
Call Waiting 41
Conference Call 41
Muting the Microphone 43
Putting a Call on Hold 40
Turning the Speaker On and Off 39
Infrared 205
Infrared Port 18
International Calls 36
Internet Settings 208
Macro Switch 17
Master Reset 194
Media Player 107
Music Player 107
Switching between Music Player and
Video Player 107
Video Player 110
Memory Card
Inserting 25
Removing 26
Memory Card Slot Cover 18
Memory Settings 194
Formatting Memory Card 194
Viewing the Memory Status 194
Menu and Shortcut 49
Messages (MMS/SMS/Email)
Calling the Phone Number 91
Creating 85
Downloading 92
Email Settings 101
Forwarding 93
General Settings 98
Locking or Unlocking 93
MMS Settings 101
Reading 91
Remote Forward 93
Replying 92
Sending a Message in the Drafts Box 90
J
Java™ Applications 140
K
Keypad 16
Keypad Lock 28
L
Language Setting 182
Left Soft Key 14
Sending with Postcard 94
SMS Settings 100
Storing the Phone Number 91
Microphone 15
Mobile Light 17
Monaural Speaker 17
Multimedia Key 15
Music Player 107
Adding a File to the Playlist 108
Adding a New Playlist 110
Playing Back 107
Searching a File to Be Played Back 108
Streaming 109
My Items 114
Bookmarks 135
Games & More 131
My Saved Page 135
Other Documents 137
Pictures 115
Sounds & Ringtones 126
Text Templates 136
Videos 121
N
Navigation Keys 14
Network Settings 205
O
Organiser 146
Alarms 150
Calculator 152
237
Index
Calendar 146
Countdown Timer 164
Expenses Memo 165
Phone Help 166
Scanner 155
Stopwatch 159
Tasks 160
Voice Recorder 154
World Clock 163
P
PC Connection 215
3G/GSM GPRS Modem 216
Handset Manager 217
Software Installation 217
System Requirements 215
Phone Help 166
Pictures
Adjusting the Size 117
Downloading 120
Editing 116
Operating 118
Saving to Contacts List Entries 116
Sending a Picture File 117
Switching the Memory Source 115
Uploading 120
Viewing 115
Power On and Off 26
Profiles 168
Activating 168
238
Any Key Answer 174
Assigning a Ring Video Clip File 171
Assigning a Ringtone 170
Customising 168
External Light Colour 174
Keypad Tones 172
Message Notification 172
Resetting 169
Ringer Volume 169
Vibration 173
R
Redialling 37
Right Soft Key 15
S
Safety Precautions 221
Scanner 155
Checking the Information of the Scanned
Data 159
Creating QR Codes 157
Deleting the Scanned Data 158
Reading Barcodes 155
Renaming the Scanned Data 159
Scanning Texts 157
Screensavers 142
Setting Applications 143
Security 191
Changing the PIN2 Code 192
Enabling/Disabling the PIN Code 191
Handset Lock 192
Phone Lock 193
Showing Secret Data 193
Send/Redial Key 14
Shortcut Key 14
Side Keys 18
SIM Application 167
SIM Card 20
Inserting 20
Removing 21
Small Light 18
Sound Settings 179
Sounds & Ringtones
Downloading 130
Operating 128
Playing Back 126
Sending a Sound File 127
Switching the Memory Source 126
Uploading 130
Using the Sound Files as a Ringtone 127
Speed Dialling 36
Stopwatch 159
Sub Camera (Internal Camera) 15
Switching the Screensaver On or Off 142
T
Tasks
Creating 160
Deleting 163
Editing 161
Sending 162
Index
Setting the Alarm 160
Viewing the Memory Status 162
Time & Date 180
Customising the Time Zone 181
Selecting the Date Format 180
Selecting the Time Format 180
Setting the Calendar Format 181
Setting the Daylight Saving 180
Setting the Time Zone 181
Troubleshooting 219
V
Video Call
Answering 45
Letting the Caller Know You are
Unavailable 45
Making 44
Rejecting 45
Status Indicators 44
Video Call Settings 47, 189
Assigning Hold Guidance Picture 190
Backlight 189
Mute 189
Selecting Picture Quality 189
Video Clip
Downloading 125
Operating 122
Playing Back 121
Sending a Video Clip File 121
Switching the Memory Source 121
Uploading 124
Video Player 110
Adding a File to the Playlist 111
Adding a New Playlist 112
Backlight 113
Editing the Video Clip File 113
Playing Back Video Clip Files 110
Searching a File to Be Played Back 111
Streaming 112
Vodafone live! 102
Voice Call 35
Answering 37
Call Waiting 41
Conference Call 41
Earpiece Volume 39
Making 35
Muting 43
Putting on Hold 40
Rejecting 38
Speed Dialling 36
Voice Mail Key 14
Voice Recorder 154
Recording 154
Selecting Storage Memory 155
Sending 154
Viewing Record Time 155
Navigating a WAP Page 103
Starting 103
World Clock
Setting the Daylight Saving 164
Setting the Time Zone 163
W
WAP Browser
Browser Menu 104
239
List of Menu Functions
Menu No./
Main Menu
1
Games & More
2
3
Vodafone live!
Media Player
4
5
6
240
Messages
Menu No./
Sub Menu1
1
2
3
4
Games
Screensavers
Settings
Java™ Information
1
2
3
4
5
6
7
8
9
10
11
12
13
Create New
Inbox
Drafts
Templates
Sent
Outbox
Iive! Studio
Messenger
Voice Mail
Cell Broadcasts
Area Info
Settings
Memory Status
1
2
3
4
5
6
7
8
Pictures
Videos
Sounds & Ringtones
Games & More
Bookmarks
My Saved Page
Text Templates
Other Documents
7
Organiser
8
Contacts
9
SIM Application
10 Connectivity
Camera
My Items
Menu No./
Main Menu
Menu No./
Sub Menu1
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
Calendar
Alarms
Calculator
Voice Recorder
Scanner
Stopwatch
Tasks
World Clock
Countdown Timer
Expenses Memo
Phone Help
Contacts List
Manage Group
Speeddial List
My Contact Details
Advanced
1
2
3
4
5
Bluetooth
Infrared
Network Settings
Internet Settings
Backup/Restore
List of Menu Functions
Menu No./
Main Menu
11 Call Log
12 Settings
Menu No./
Sub Menu1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
All Calls
Missed Calls
Received Calls
Dialled Numbers
Call Timers
Call Costs
Profiles
Display Settings
Sound Settings
Time & Date
Language
Call Settings
Video Call Settings
Security Settings
Memory Settings
Master Reset
241