Whirlpool RS675PXG Specifications

Add to my manuals
20 Pages

advertisement

Whirlpool RS675PXG Specifications | Manualzz

8300666A

ELECTRICDROP-IN

RANGES

For questions about features, operation/performance parts, accessories or service, call: 1-800-253-1301.

or visit our website at...

www.whirlpool.com

Table of Contents .......................................

2

Models RS610PXG

RS675PXG

RS696PXG

TABLEOF CONTENTS

RANG E SAFETY .............................................................................

3

The Anti-Tip Bracket ....................................................................

3

PARTS AND FEATURES ................................................................

6

COOKTOP USE ..............................................................................

7

Cooktop Controls .........................................................................

7

Ceramic Glass ..............................................................................

7

Coil Elements and Burner Bowls .................................................

8

Lift-up Cooktop ............................................................................

8

Home Canning .............................................................................

8

Cookware .....................................................................................

9

ELECTRONIC OVEN CONTROL ...................................................

9

Display ..........................................................................................

Start/Enter ....................................................................................

Off/Cancel ....................................................................................

9

9

9

Clock ..........................................................................................

Tones ..........................................................................................

10

10

Fahrenheit and Celsius ...............................................................

10

Timer ...........................................................................................

10

Control Lock ...............................................................................

10

Oven Temperature Control ........................................................

10

OVEN USE .....................................................................................

11

Aluminum Foil .............................................................................

11

Positioning Racks and Bakeware ..............................................

11

Bakeware ....................................................................................

12

Meat Thermometer .....................................................................

12

Oven Door Vent ..........................................................................

12

Baking and Roasting ..................................................................

12

Broiling ........................................................................................

13

Timed Cooking ...........................................................................

13

RANGE CARE ...............................................................................

14

Self-Cleaning Cycle ....................................................................

14

General Cleaning ........................................................................

15

Oven Light(s) ..............................................................................

17

Oven Door ..................................................................................

17

TROUBLESHOOTING ..................................................................

18

ASSISTANCE OR SERVICE .........................................................

19

WARRANTY ..................................................................................

20

RANGESAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This symbol alerts you to potential hazards that can kill or hurt you and others.

This is the safety alert symbol.

"WARNING." These words mean:

You can be killed or seriously injured if you don't

immediately follow instructions.

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without the anti-tip bracket fastened down properly.

Mounting screw

Tip Over Hazard

A child or adult can tip the range and be killed.

Securely attach mounting screws to cabinet.

Reattach mounting screws if the range is moved.

See installation instructions for details.

Failure to follow these instructions can result in death or serious burns to children and adults.

Making sure the mounting screws are installed:

Remove side trim from both sides of the range.

Look for screws securely attached to cabinet.

Replace side trim.

iMPORTANT SAFETY iNSTRUCTiONS

WARNUNG:

To reduce the risk of fire, ebctricd shock, injury to persons, or damage when using the range, follow basic precautions, inciuding the following:

•,

WARNUNG:

TO REDUCE THE RiSK OF

TIPPING OF THE RANGE, THE RANGE MUST BE

SECURED BY PROPERLY INSTALLED ANTPTIP

DEVICES. TO CHECK IF THE DEVICES ARE

INSTALLED PROPERLY, OPEN THE OVEN DOOR,

REMOVE A SCREW AT THE BOTTOM OF EACH

SIDE TRIM, REMOVE THE SiDE TRIMS, AND

VERIFY THAT THE ANTPTIP DEVICES ARE

ENGAGED TO CABINETS WITH TWO SCREWS

THROUGH THE MOUNTING HOLES IN THE

MOUNTING RAiL OF THE OVEN.

•,

OAUTUON:

Do not store items of interest to cNdren in cabinets above a range or on the backguard of a range - chiidren ciimbing on the range to reach items couid be seriousiy injured.

,, Proper Installation - Be sure the range is properly installed and grounded by a qualified technician.

,, Never Use the Range for Warming or Heating the

Room.

,, Do Not Leave Children Alone - Children should not be left alone or unattended in area where the range is in use. They should never be allowed to sit or stand on any part of the range.

,, Wear Proper Apparel - Loose-fitting or hanging garments should never be worn while using the range.

,, User Servicing - Do not repair or replace any part of the range unless specifically recommended in the manual. All other servicing should be referred to a qualified technician.

,, Storage in or on the Range - Flammable materials should not be stored in an oven or near surface units.

,. Do Not Use Water on Grease Fires - Smother fire or flame or use dry chemical or foam4ype extinguisher.

Use Only Dry Potholders - Moist or damp potholders on hot surfaces may result in burns from steam. Do not let potholder touch hot heating elements. Do not use a towel or other bulky cloth.

DO NOT TOUCH SURFACE UNITS QR AREAS

NEAR UNITS - Surface units may be hot even though they are dark in color. Areas near surface units may become hot enough to cause burn&

During and after use, do not touch, or let clothing or other flammable materials contact surface units or areas near units until they have had sufficient time to cool Among those areas are the cooktop and surfaces facing the cooktop.

Use Proper Pan Size - The range is equipped with one or more surface units of different size. Select utensils having fiat bottoms large enough to cover the surface unit heating elemenL The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing.

Proper relationship of utensil to burner wiii also improve efficiency.

Never Leave Surface Units Unattended at High Heat

Settings - Boilover causes smoking and greasy spillovers that may ignite.

Make Sure Reflector Pans or Drip Bowls Are in Place

- Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.

Protective Liners - Do not use aluminum foil to line surface unit drip bowls or oven bottoms, except as suggested in the manual. Improper installation of these liners may result in a risk of electric shock, or fire.

Glazed Cooking Utensils - Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for range-top service without breaking due to the sudden change in temperature.

Utensil Handles Should Be Turned Inward and Not

Extend Over Adjacent Surface Units - To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.

Do Not Soak Removable Heating Elements -

Heating elements should never be immersed in water.

Do Not Cook on Broken Cooktop - If cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact a qualified technician

Clean Cooktop With Caution - If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a hot surface.

Use Care When Opening Door - Let hot air or steam escape before removing or replacing food.

Do Not Heat Unopened Food Containers - Build-up of pressure may cause container to burst and resuit in injury.

SAVE THESE NSTRUCT ONS

IMPORTANT SAFETY INSTRUCTIONS

• Keep Oven Vent Ducts Unobstructed.

• Placement of Oven Racks - Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot, do not let potholder contact hot heating element in oven.

• DO NOT TOUCH HEATING ELEMENTS OR

INTERIOR SURFACES OF OVEN - Heating elements may be hot even though they are dark in color.

Interior surfaces of an oven become hot enough to cause burns. During and after use, do not touch, or let clothing or other flammable materials contact heating elements or interior surfaces of oven until they have had sufficient time to cool. Other surfaces of the appliance may become hot enough to cause burns - among these surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of oven doors.

For self-cleaning ranges -

• Do Not Clean Door Gasket - The door gasket is essential for a good seal. Care should be taken not to rub, damage, or move the gasket.

• Do Not Use Oven Cleaners - No commercial oven cleaner or oven liner protective coating of any kind should be used in or around any part of the oven.

• Clean Only Parts Listed in Manual.

• Before Self-Cleaning the Oven - Remove broiler pan and other utensils.

For units with ventilating hood -

• Clean Ventilating Hoods Frequently - Grease should not be allowed to accumulate on hood or filter.

• When flaming foods under the hood, turn the fan on.

SAVE THESE INSTRUCTIONS

The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a Hst of substances known to the State of California to cause cancer, birth defects, or other reproductive harm, and requires businesses to warn of potentiaH exposure to such substances.

WARNHNG: This product contains a chemicaH known to the State of California to cause cancer, birth defects, or other reproductive harm.

This appliance can cause How-HeveH Hsted, incHuding benzene, formaHdehyde, carbon monoxide, and toHuene.

PARTSANDFEATURES

This manual covers several different models. The range you have purchased may have some or all of the parts and features listed. The location and appearance of the features shown here may not match your model.

Control Panel

Coil Element Models Ceramic Glass Models

_

_

2..............................................

o_ .,..

_, 2 ,

2

!. Left Rear Control Knob

2. Surface Area Locator

3. Right Rear Control Knob

4. Left Front Control Knob

5. Right Front Control Knob

6. Power On Indicator Light

7. Hot Surface Indicator Light

_

6

Range

_ .......................................................................................................... 5

!. Surface Cooking Area

2. Oven Vent

3, Broil Element (not shown)

4, Bake Element

5, Cooktop Control Panel

6, Oven Control Panel

7. Model and Serial Number

(on mounting rail)

COOKTOPUSE

Fire Hazard

Turn off all controls when done cooking.

Failure to do so can result in death or fire.

The control knobs can be set anywhere between HI and LO. Push in and turn to setting. The surface cooking area Iocator shows which element is turned on, Use the following chart as a guide when setting heat levels,

SETTING RECOMMENDED USE

HI

6-8

[MED- HI]

5

[MED]

2-4

[MED- LO]

• Start food cooking.

• Bring liquid to a boil,

• Hold a rapid boil.

• Quickly brown or sear food.

• Maintain a slow boil.

• Fry or saute foods.

• Cook soups, sauces and gravies.

• Stew or steam food.

• Simmer,

LO • Keep food warm.

• Melt chocolate or butter,

The surface cooking area will glow red when an element is on. It will cycle on and off, at all settings, to maintain the selected heat level.

It is normal for the surface of white ceramic glass to appear to change color when surface cooking areas are hot. As the glass cools, it will return to its original color.

Wiping off the cooktop before and after each use will help keep it free from stains and provide the most even heating. For more information, see "General Cleaning" section.

• Do not store jars or cans above the cooktop.

Dropping a heavy or hard object on the cooktop could crack it.

• Do not leave a hot lid on the cooktop, As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed,

• Clean up sugary spills and soils as soon as hot surface indicator light goes off. If spills or soils are not wiped up while warm, surface pitting can occur.

Do not slide cookware or bakeware across the cooktop,

Aluminum or copper bottoms and rough finishes on cookware or bakeware could leave scratches or marks on the cooktop.

• Do not cook popcorn in prepackaged aluminum containers on the cooktop, It could leave aluminum marks that cannot be removed completely.

• Do not allow objects that could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.

• Do not use the cooktop as a cutting board,

• Use cookware about the same size as the surface cooking area. Cookware should not extend more than 1 in, (2.5 cm) outside the area,

I

I

\

\

J

\

\

I

I

REMEMBER: When range is in use or (on some models) during the Self=Cleaning cycle, the entire cooktop area may become hot.

Power On Light

The Power On light will glow when any of the coil element(s) is turned on,

1. Surface Cooking Area

2. Cookware/Canner

3. 1" (2.5 cm) Maximum Overhang

Use flat-bottomed cookware for best heat conduction and energy efficiency.

Cookware with rounded, warped, ribbed or dented bottoms could cause uneven heating and poor cooking results.

Determine flatness by placing the straight edge of a ruler across the bottom of the cookware.

While rotating the ruler, no space or light should be visible between it and the cookware.

Cookware designed with slightly indented bottoms or small expansion channels can be used,

Make sure the bottoms of pots and pans are clean and dry before using them. Residue and water can leave deposits when heated.

• Do not cook foods directly on the cooktop.

Hot Surface Indicator Light (under ceramic glass)

The hot surface indicator light will glow as long as any surface cooking area is too hot to touch, even after the surface cooking area(s) is turned off.

_O _'_

The lift-up cooktop provides easy access for cleaning beneath.

Do not drop the cooktop.

Damage could occur to the finish and the cooktop frame. For more information, see the "General

Cleaning" section.

To Lift:

Lift the cooktop by both front corners until the supports lock into place.

Coil elements should be level for optimal cooking results. Burner bowls, when clean, reflect heat back to the cookware.

They also help catch spills.

Cookware should not extend more than 1 in. (2.5 cm) over the coil element. If cookware is uneven or too large, it can produce excess heat causing the burner bowl to change color. For more information, see the "General Cleaning" section.

Before removing or replacing coil elements and burner bowls, make sure they are cool and the control knobs are in the off position.

To Remove:

1.

Push in the edge of coil element toward the receptacle. Then lift it just enough to clear the burner bowl.

To Replace:

1.

Lift the cooktop from both sides while pressing the support rods back to unlock them.

2.

Slowly lower the cooktop into place.

2,

Pull the coil element straight away from the receptacle.

When canning for long periods, alternate the use of surface cooking areas, elements or surface burners between batches.

This allows time for the most recently used areas to cool.

• Center the canner on the grate or largest surface cooking area or element. Canners should not extend more than 1 in.

(2.5 cm) outside the cooking area.

• Do not place canner on two surface cooking areas, elements or surface burners at the same time.

• On ceramic glass models, only use flat-bottomed canners.

On coil element models, the installation of a Canning Unit Kit is recommended.

If not installed, the life of the coil element will be shortened. See "Assistance or Service" for ordering instructions.

For more information, contact your local U.S. Government

Agricultural Department Extension Office. Companies that manufacture home canning products can also offer assistance.

3.

Lift out the burner bowl.

To Replace:

1.

Line up openings in the burner bowl with the coil element receptacle.

\

\

2.

Holding the coil element as level as possible, carefully push coil element terminal into the receptacle.

3.

When the terminal is pushed into the receptacle as far as it will go, push down the edge of the coil element opposite the receptacle.

ELECTRONICOVEN

IMPORTANT: cooking shouldhaveaflatbottom, fittinglidandthematerial thickness.

finishes maybeusedasacoreorbaseincookware.

whenused orgrates.

material transferred, cooking thesamecharacteristics cookware asitsbasematerial.

finishwilltakeonthe chartasaguideforcookware characteristics.

COOKWARE CHARACTERISTICS

Aluminum

1. Display

2. Timer

3. Clock

4. Manual Oven Light

CONTROL

2 3 4

6 7

5. Oven Settings

6. Temperature Setting

7. Timed Cooking

8. Hour

8 9 10 11

9. Minute

10. Start/Enter

(Control Lock)

! 1. Off/Cancel orheavy tasks.

Castiron When power is first supplied to the appliance, "PF" will appear on the display. Press OFF to clear.

Any other time "PF" appears, a power failure has occurred.

Press

OFF and reset the Clock if needed.

When the oven is in use, the display shows preheat time and the temperature and oven setting.

When the oven is not in use, the display shows the time of day.

When using COOK TIME (on some models) the display will show either hours and minutes, or minutes and seconds.

Ceramic butunevenly.

• Idealresults settings.

Copper

Earthenware • Follow instructions.

• Useonlowheatsettings.

Porcelain enamel-onsteel or cast iron

Stainless steel • Heats quickly, but unevenly.

• A core or base of aluminum or copper on stainless steel provides even heating.

The START/ENTER pad begins any oven function except the

Timer. On some models, if pad is not pressed within 5 seconds after pressing a function pad, the "START?" indicator light will flash as a reminder. On some models, "START?" will appear on the display.

If not pressed within 4 to 5 minutes (depending on your model) after pressing a function pad, the oven display will return to the time of day mode and the programmed function will be canceled.

The OFF pad stops any function except the Clock, Timer and

Control Lock.

The cooling fan may continue to operate after an oven function has been canceled, depending on oven temperature.

To Set:

Before setting, make sure the oven, Timer and Timed Cooking are off.

1.

Press CLOCK.

2.

Press the HR or MIN "up" or "down" arrow pads to set the time of day.

3.

Press CLOCK or START/ENTER.

To Disable:

The clock time can be disabled so that it does not show on the display. To disable, press and hold CLOCK for 5 seconds. To display the clock time again, press and hold CLOCK for 5 seconds and the time of day will show on the display. The clock time should not have to be reset.

Tones are audible signals, indicating the following:

One tone

• Valid pad press

• Oven is preheated

• Function has been entered

Three tones

• Invalid pad press

Four tones

• End-of-cycle

• Reminder, repeating each minute after the end-of-cycle tones

All Tones

All of the above tones are preset on, all except the end-of-cycle tones can be turned off.

To Turn Off/On: Press and hold STOP TIME for 5 seconds. A tone will sound and "oFF" or "Snd OFF" (depending on your model) will appear on the display. Repeat to change back to "on" or "Snd On" (depending on your model).

Reminder Tones

Reminder tones are four 1-second tones which indicate that the set time has expired for a timer or a timed oven control function.

To Turn Off/On: Press and hold COOK TIME for 5 seconds. On some models, "NAG OFF" or "NAG ON" will appear on the display.

Tone Volume

The volume is preset at high, but can be changed to low.

To Change: Press and hold DELAY START for 5 seconds. A tone will sound and "HI" or "Snd HI" (depending on your model) will appear on the display. Repeat to change back to "LO" or "Snd

LO" (depending on your model).

The temperature is preset at Fahrenheit, but can be changed to

Celsius.

To Change: Press and hold CUSTOM BROIL for 5 seconds. A single tone will sound. Repeat to change back to Fahrenheit.

The Timer can be set in hours or minutes up to 12 hours and 59 minutes and counts down the set time. The Timer does not start or stop the oven.

To Set:

1.

Press TIMER SET.

If no action is taken between 1 and 5 minutes (depending on your model), the display will return to the time of day mode.

2=

3.

Press the HR or MIN "up" or "down" arrow pads to set the length of time.

Press TIMER SET or START.

If not pressed within a specific amount of time, the display will return to the time of day mode and the programmed function will be canceled.

When the set time ends, end-of-cycle tones will sound, then, if on, reminder tones will sound every minute.

Press TIMER OFF anytime to cancel the Timer and/or stop reminder tones.

Remember, do not press the OFF pad (button) because the oven will turn off.

The time can be reset during the countdown by repeating the above steps.

To display the time of day when the timer is counting down, press

CLOCK.

The Control Lock shuts down the control panel pads to prevent unintended use of the oven.

When the control is locked, only the CLOCK and TIMER pads will function.

To Lock/Unlock Control: Before locking, make sure the oven and Timer are off. Touch and hold START/ENTER for 5 seconds.

A single tone will sound, a padlock icon and "LOCK'D" (on some models) will appear on the display. The padlock icon will also appear whenever any command pad is pressed while the control is locked.

Repeat to unlock. The padlock icon and "LOCK'D" (on some models) will disappear from the display.

IMPORTANT: Do not use a thermometer to measure oven temperature because opening the oven door and element or burner cycling may give incorrect readings.

The oven provides accurate temperatures; however, it may cook faster or slower than your previous oven, so the temperature calibration can be adjusted.

It can be changed in Fahrenheit or

Celsius.

10

A minus sign means the oven will be cooler by the displayed amount. No sign means the oven will be warmer by the displayed amount. Use the following chart as a guide.

ADJUSTMENT °F

(ADJUSTMENT °C)

COOKS FOOD

10°F (5°C) ...a little more

20°F (10°C)

30°F (15°C)

-10°F (-5°C)

-20°F (-10°C)

-30°F (-15°C)

...moderately

...much more

...a little less

...moderately

...much less more less

To Adjust Oven Temperature Calibration:

1.

Touch and hold BAKE for 5 seconds until the oven display shows the current calibration, for example "00."

2.

Touch the TEMP "up" or "down" arrow pad(s) to increase or to decrease the temperature in 10°F (5°C) amounts. The

3.

adjustment can be set between 30°F (15°C) and -30°F

(-15°0).

Touch START/ENTER.

OVENUSE

Odors and smoke are normal when the appliance is new. This happens the first time the oven is used or when the oven is heavily soiled.

During oven use, the heating elements will not remain on, but will cycle on and off throughout oven operation.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off. Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well ventilated room.

IMPORTANT: Do not line the oven bottom with any type of foil, liners or cookware because permanent damage will occur to the oven bottom finish.

• Do not cover entire rack with foil because air must be able to move freely for best cooking results.

• To catch spills, place foil on rack below dish. Make sure foil is at least 1 in. (2.5 cm) larger than the dish and that it is turned up at the edges.

• Do not cover food with aluminum foil when convection cooking (on some models).

IMPORTANT: Never place food or bakeware directly on the oven door or bottom. Permanent damage will occur to the porcelain finish.

RACKS

Position racks before turning the oven on. Do not move racks with bakeware on them. Make sure racks are level. To move a rack, pull it out to the stop position, raise the front edge, then lift out. Use the following illustration and chart as a guide.

FOOD

Frozen pies, large roasts, turkeys, angel food cakes

Bundt cakes, most quick breads, yeast breads, casseroles, meats

Cookies, biscuits, muffins, cakes, non-frozen pies

RACK POSITION

1 or 2

2

2 or 3

BAKEWARE

To cook food evenly, hot air must be able to circulate. Allow 2 in.

(5 cm) of space around bakeware and oven walls. Use the following chart as a guide.

NUMBER OF POSITION ON RACK

PAN(S)

1 Center of rack.

2

3 or 4

Side by side or slightly staggered.

Opposite corners on each rack. Make sure that no bakeware piece is directly over another.

11

The bakeware material affects cooking results. Follow manufacturer's recommendations and use the bakeware size recommended in the recipe. Use the following chart as a guide.

BAKEWARE/

RESULTS

RECOMMENDATIONS

• Use temperature and time recommended in recipe.

Light colored aluminum

• Light golden crusts

• Even browning

Dark aluminum and other bakeware with

dark, dull and/or non-stick finish

• Brown, crisp crusts

Insulated cookie sheets or baking pans

• Little or no bottom browning

Stainless steel

• Light, golden crusts

• Uneven browning

Stoneware

• Crisp crusts

Ovenproof glassware, ceramic glass or ceramic

• Brown, crisp crusts

May need to reduce baking temperatures 25°F (15°C).

Use suggested baking time.

For pies, breads and casseroles, use temperature recommended in recipe.

• Place rack in center of oven.

• Place in the bottom third of oven.

• May need to increase baking time.

May need to increase baking time.

Follow manufacturer's temperatures instructions.

May need to reduce baking

25°F (15°C).

On models without a temperature probe, always rely on a meat thermometer to determine doneness of meat and poultry. The internal temperature, not appearance, is what counts. A meat thermometer is not supplied with this appliance.

• Insert the thermometer into the center of the thickest portion of the meat or inner thigh or breast of poultry. The tip of the thermometer should not touch fat, bone or gristle.

• After reading the thermometer once, push it into the meat

1/2in. (1.25 cm) more and read again. If the temperature drops, cook the meat or poultry longer.

• Check all meat in two or three places.

1. Oven door vent

Hot air and moisture escape from the oven door vent during certain oven modes. Some condensation may occur, however this will not affect cooking performance.

ACCUBAKE ® Temperature Management System

(on some models)

The ACCUBAKE system electronically regulates the oven heat levels during preheat and bake to maintain a precise temperature range for optimal cooking results. The bake and broil elements cycle on and off in intervals. The bake element will glow red when cycling on, the broil element will not. This feature is automatically activated when the oven is in use.

Before baking and roasting, position racks according to the

"Positioning Racks and Bakeware" section. When roasting, it is not necessary to wait for the oven preheat conditioning time to end before putting food in unless recommended in the recipe.

To Bake or Roast:

1.

Press BAKE.

Press TEMP "up" or "down" arrow pads to set a temperature other than 350°F (177°C) in 5° amounts. The bake range can be set between 170°F and 500°F (77°C and 260°C).

2.

Press START.

The temperature can be changed after this step.

START does not need to be pressed again.

3.

Press OFF when finished.

Preheating

After START is pressed, the oven will enter a timed preheat conditioning.

"PrE" and the time countdown will appear on the display. When the preheat conditioning time ends, a tone will sound and the selected temperature will appear on the display.

Preheat temperatures are affected by varying factors such as room temperature and peak energy usage times. It is normal for the temperature showing on the display and the actual oven temperature to differ.

Waiting an additional 10 minutes after the preheat conditioning time ends to put food in the oven is suggested when baking foods with leavening ingredients, such as yeast, baking powder, baking soda and eggs.

12

Broiling uses direct radiant heat to cook food. Changing the temperature when Custom Broiling allows more precise control when cooking. The lower the temperature, the slower the cooking. Thicker cuts and unevenly shaped pieces of meat, fish and poultry may cook better at lower broiling temperatures.

• Use only the broiler pan and grid provided with the range. It is designed to drain juices and help prevent spatter and smoke.

• For proper draining, do not cover the grid with foil. The bottom of the pan may be lined with aluminum foil for easier cleaning.

• Trim excess fat to reduce spattering.

Slit the remaining fat on the edges to prevent curling.

• Pull out oven rack to stop position before turning or removing food. Use tongs to turn food to avoid the loss of juices. Very thin cuts of fish, poultry or meat may not need to be turned.

• After broiling, remove the pan from the oven when removing the food. Drippings will bake on the pan if left in the heated oven, making cleaning more difficult.

Before broiling, position rack according to Broiling chart. It is not necessary to preheat the oven before putting food in unless recommended in the recipe. Position food on grid in the broiler pan, then place it in the center of the oven rack. Close the door.

To Broil:

1.

Press CUSTOM BROIL.

2.

Press START/ENTER.

3.

Press OFF/CANCEL when finished.

To Custom Broil:

1.

Press CUSTOM BROIL.

2.

Press TEMP "up" or "down" arrow pad to change the temperature in 5° amounts. The broil range can be set between between 300°F (150°C) and HI (525°F [275°C]).

3.

Press START/ENTER.

4.

Press OFF/CANCEL when finished.

BROILING CHART

For best results, place food 3 in. (7 cm) or more from the broil burner. Times are guidelines only and may need to be adjusted for individual tastes. Recommended rack positions are numbered from the bottom (1) to the top (5). For diagram, see the

"Positioning Racks and Bakeware" section.

FOOD

RACK

POSITION

Approximate

Time (minutes)

SIDE 1 SIDE 2

Steak

1 in. (2.5 cm) thick medium rare medium well done

*Ground meat patties

3/4in. (2 cm) thick well done

Pork chops

1 in. (2.5 cm) thick

Ham slice, precooked

1/2in. (1.25 cm) thick

4

4

4

4

4

4

14-15

15-16

18-19

13-14

21-22

8-10

7-8

8-9

9-10

6-7

10-11

4-5

FOOD

Frankfurters

RACK

POSITION

4

Approximate

Time (minutes)

SIDE 1

6-7

SIDE 2

3-4

Lamb chops

1 in. (2.5 cm) thick

Chicken bone-in pieces boneless breasts

4

3

4

15-17

18-20

12-16

8-9

18-20

11-16

Fish

Fillets 1/4-1/2in.

(.6-1.25 cm) thick

Steaks 3/4- 1 in.

(2-2.5 cm) thick

4

4

8-10

15-18

* Place up to 9 patties, equally spaced, on broiler grid.

4-5

7-9

Food Poisoning Hazard

Do not let food sit in oven more than one hour before or after cooking.

Doing so can result in food poisoning or sickness.

Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length of time, and/or shut off automatically.

DELAY START TIME should not be used for food such as breads and cakes because they may not bake properly.

Before setting, make sure the clock is set to the correct time of day. See "Clock" section.

To Set a COOK TIME:

1.

Press BAKE.

Press TEMP "up" or "down" arrow pad to set a temperature other than 350°F (177°C) in 5° amounts. The bake range can be set between 170°F and 500°F (77°C and 260°C).

2.

Press COOK TIME.

3.

Press HR and MIN "up" or "down" arrow pad until the desired length of time appears on the display.

4.

Press START/ENTER.

The temperature and set cook time can be changed after this step. START/ENTER does not need to be pressed again.

When the set cook time ends, the oven will shut off automatically and "End" will appear on the display. End-ofcycle tones will sound, then reminder tones will sound every minute until OFF/CANCEL is pressed.

5.

Press OFF/CANCEL anytime to end Timed Cooking or to stop reminder tones and clear the display.

13

To Set a DELAY START TIME:

1.

Press BAKE.

Press TEMP "up" or "down" arrow pad to set a temperature other than 350°F (177°C) in 5° amounts. The bake range can be set between 170°F and 500°F (77°C and 260°C).

2.

Press DELAY START TIME.

3.

Press HR and MIN "up" or "down" arrow pad until the desired time of day to start appears on the display.

4.

Press START/ENTER.

The temperature can be changed after this step. START/

ENTER does not need to be pressed again,

When the delay start time is reached, a tone will sound. The display wUI count down the set cook time.

5.

Press OFF/CANCEL when finished,

To Set a COOK TIME and DELAY START TIME:

1.

Press BAKE,

Press TEMP "up" or "down" arrow pad to set a temperature other than 350°F (177°C) in 5° amounts. The bake range can be set between 170°F and 500°F (77°C and 260°C),

2.

Press COOK TIME.

3.

Press HR and MIN "up" or "down" arrow pad until the desired length of time appears on the display.

4.

Press DELAY START TIME.

5.

Press HR and MIN "up" or "down" arrow pad until the desired time of day to start appears on the display.

6.

Press START/ENTER.

The temperature and set cook time can be changed after this step. START/ENTER does not need to be pressed again.

When the delay start time is reached, a tone will sound. The display will count down the set cook time.

When the set cook time ends, the oven will shut off automatically and "End" will appear on the display. End-ofcycle tones will sound, then reminder tones will sound every minute until OFF/CANCEL is pressed.

7.

Press OFF/CANCEL anytime to end Timed Cooking or to stop reminder tones and clear the display.

RANGE6Ai{E i_ _ _© _i_i

Burn Hazard

Do not touch the oven during the

Self-Cleaning cycle.

Keep children away from oven during

Self-Cleaning cycle.

Failure to follow these instructions can result in burns.

IMPORTANT: The health of some birds is extremely sensitive to the fumes given off during the Self-Cleaning cycle, Exposure to the fumes may result in death to certain birds. Always move birds to another closed and well ventilated room,

Self-clean the oven before it becomes heavily soiled. Heavy soil results in longer cleaning and more smoke.

Keep the kitchen well-ventilated during the Self-Cleaning cycle to help get rid of heat, odors, and smoke.

Do not block the oven vent(s) during the Self-Cleaning cycle. Air must be able to move freely. See "Oven Vent(s)" section,

Do not clean, rub, damage or move the oven door gasket, The door gasket is essential for a good seal.

Prepare Oven:

• Remove the broiler pan, grid, cookware and bakeware and, on some models, the temperature probe from the oven.

• Remove any foil from the oven because it may burn or melt, damaging the oven.

• Remove oven racks to keep them shiny and easy to slide.

See "General Cleaning" section for more information.

Hand clean inside door edge and the 11/2in. (3.8 cm) area around the inside oven cavity frame, being careful not to move or bend the gasket. This area does not get hot enough during self-cleaning to remove soil. Do not let water, cleaner, etc. enter slots on door frame. Use a damp cloth to clean this area.

Wipe out any loose soil to reduce smoke and avoid damage.

At high temperatures, foods react with porcelain. Staining, etching, pitting or faint white spots can result. This will not affect cooking performance.

14

Prepare Cooktop and Storage Drawer:

• Remove plastic items from the cooktop because they may melt.

• Remove all items from the storage drawer.

How the Cycle Works

IMPORTANT: The heating and cooling of porcelain on steel in the oven may result in discoloring, loss of gloss, hairline cracks and popping sounds.

The Self-Cleaning cycle uses very high temperatures, burning soil to a powdery ash.

The oven is preset for a 3 hour 30 minute clean cycle, but the time can be changed. Suggested clean times are 2 hours 30 minutes for light soil and between 3 hours 30 minutes to 4 hours

30 minutes for average to heavy soil.

Once the oven has completely cooled, remove ash with a damp cloth. Do not wipe down any of the inside surfaces until the oven has completely cooled down. Applying a cool damp cloth to the inner door glass before it has completely cooled could result in the glass breaking.

The oven light will not work during the Self-Cleaning cycle.

To Serf-Clean:

Before self-cleaning, make sure the door is closed completely or it will not lock and the cycle will not begin.

1.

Press AUTO CLEAN.

2.

Press the HR and MIN "up" or "down" arrow pad to set a clean time other than 3 hours 30 minutes. The clean time can be set between 2 hours 30 minutes and 4 hours 30 minutes.

3.

Press START/ENTER.

The oven door will automatically lock. "LOCKED" will appear on the display. The door will not unlock until the oven cools.

When the cycle is complete and the oven cools, "End" will appear on the oven display and "LOCKED" will disappear.

4.

Press OFF/CANCEL or open the oven door to clear the oven display.

To Delay Start Self-Clean:

Before delay starting Self-Clean, make sure the clock is set to the correct time of day. See "Clock" section. Also, make sure the door is closed completely or it will not lock and the cycle will not begin.

1.

Press AUTO CLEAN.

Press the HR "up" or "down" arrow pad to set a clean time other than 3 hours 30 minutes. The clean time can be set between 2 hours 30 minutes and 4 hours 30 minutes.

2.

Press DELAY START TIME.

3.

Press the HR and MIN "up" or "down" arrows pads to enter the time of day to start.

4.

Press START/ENTER.

The time of day is displayed.

The door will automatically lock and "LOCKED" and "DELAY" will appear on the display. The door will not unlock until the oven cools.

When the start time is reached, the oven will automatically turn on.

When the cycle is complete and the oven cools, "End" will appear on the lower oven display and "LOCKED" will disappear.

5.

Press any pad or open the oven door to clear the oven display.

To Stop Self-Clean any time:

Press OFF/CANCEL.

If the oven temperature is too high, "cln,"

"TIMED," "ON," "cool," and "LOCKED" will appear on the display and the door will remain locked. It will not unlock until the oven cools.

IMPORTANT: Before cleaning, make sure all controls are off and the oven and cooktop are cool. Always follow label instructions on cleaning products.

Soap, water and a soft cloth or sponge are suggested first unless otherwise noted.

EXTERIOR PORCELAIN ENAMEL SURFACES

(on some models)

Food spills containing acids, such as vinegar and tomato, should be cleaned as soon as the entire appliance is cool. These spills may affect the finish.

• Glass cleaner, mild liquid cleaner or nonabrasive scrubbing pad:

Gently clean around the model and serial number plate because scrubbing may remove numbers.

CERAMIC GLASS (on some models)

Do not use steel wool, abrasive powder cleansers, chlorine bleach, rust remover or ammonia because damage may occur.

Always wipe with a clean, wet cloth or sponge and dry thoroughly to prevent streaking and staining.

Cooktop Polishing Creme is recommended for regular use to help prevent scratches, pitting and abrasions, and to condition the cooktop.

It may be ordered as an accessory.

See "Assistance or

Service" to order.

A Cooktop Scraper is also recommended for stubborn soils, and can be ordered as an accessory.

See "Assistance or Service" to order. The Cooktop Scraper uses razor blades. Store razor blades out of the reach of children.

Light to moderate soil

• Paper towels or clean damp sponge:

Clean while the cooktop is still warm. You may want to wear oven mitts while doing so.

Sugary spills (jellies, candy, syrup)

• Cooktop Scraper:

Clean while the cooktop is still warm. You may want to wear oven mitts while doing so.

• Cooktop Polishing Creme and clean damp paper towel:

Clean as soon as cooktop has cooled down. Rub creme into surface with a damp paper towel or soft cloth. Continue rubbing until white film disappears.

15

Heavy soil, dark streaks, specks and discoloration

• Cooktop Polishing Creme or non-abrasive cleanser:

Rub product into soil with a damp paper towel or soft cloth.

Continue rubbing until white film disappears.

Burned-on soil

• Cooktop Polishing Creme and Cooktop Scraper:

Rub creme into soil with damp paper towel. Hold scraper as flat as possible on surface and scrape. Repeat for stubborn spots. Polish entire cooktop with creme and paper towel.

Metal marks from aluminum and copper

• Cooktop Polishing Creme:

Clean as soon as cooktop has cooled down. Rub creme into surface with a damp paper towel or soft cloth. Continue rubbing until white film disappears.

The marks will not totally disappear but after many cleanings become less noticeable.

Tiny scratches and abrasions

• Cooktop Polishing Creme:

Rub creme into surface with a damp paper towel or soft cloth. Continue rubbing until white film disappears.

Scratches and abrasions do not affect cooking performance and after many cleanings become less noticeable.

STAINLESS STEEL (on some models)

Do not use soap-filled scouring pads, abrasive cleaners, Cooktop

Polishing Creme, steel-wool pads, gritty washcloths or some paper towels. Damage may occur.

Rub in direction of grain to avoid damaging.

• Stainless Steel Cleaner & Polish (not included):

See "Assistance or Service" section to order.

• Liquid detergent or all-purpose cleaner:

Rinse with clean water and dry with soft, lint-free cloth.

• Vinegar for hard water spots

COOKTOP CONTROLS

Do not use steel wool, abrasive cleansers or oven cleaner.

Do not soak knobs.

When replacing knobs, make sure knobs are in the OFF position.

On some models, do not remove seals under knobs.

• Soap and water or dishwasher:

Pull knobs straight away from control panel to remove.

COIL ELEMENTS (on some models)

Do not clean or immerse in water. Soil will burn off when hot.

For more information, see "Coil Elements and Burner Bowls."

• Damp cloth:

Make sure control knobs are off and elements are cool.

BURNER BOWLS (on some models)

Do not clean in the Self-Cleaning cycle.

• Solution of 1/2cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with stainless steel wool pad.

• Oven cleaner:

Follow product label instructions.

• Mildly abrasive cleanser:

Scrub with wet scouring pad.

Porcelain enamel only, not chrome

• Dishwasher r

SURFACE UNDER COOKTOP (on some models)

To avoid product damage, do not remove the cooktop.

For more information, see "Lift-up Cooktop" section.

• Steel wool pad

OVEN DOOR EXTERIOR

• Glass cleaner and paper towels or nonabrasive plastic scrubbing pad:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

CONTROL PANEL

Do not use abrasive cleaners, steel-wool pads, gritty washcloths or some paper towels. Damage may occur.

• Glass cleaner and soft cloth or sponge:

Apply glass cleaner to soft cloth or sponge, not directly on panel.

OVEN CAVITY

Do not use oven cleaners.

Food spills should be cleaned when oven cools. At high temperatures, foods react with porcelain and staining, etching, pitting or faint white spots can result.

• Self-Cleaning cycle:

See "Self-Cleaning Cycle" first.

OVEN AND ROASTING RACKS

• Self-Cleaning cycle:

See "Self-Cleaning Cycle" first. Remove racks or they will discolor and become harder to slide. If this happens, a light coating of vegetable oil applied to the rack guides will help them slide.

• Steel wool pad

16

BROILER PAN AND GRID

Do not clean in the Self-Cleaning cycle.

• Mildly abrasive cleanser:

Scrub with wet scouring pad.

• Solution of 1/2cup (125 mL) ammonia to 1 gal. (3.75 L) water:

Soak for 20 minutes, then scrub with scouring or steel wool pad.

• Oven cleaner:

Follow product label instructions.

Porcelain enamel only, not chrome

• Dishwasher

3=

4.

Close the oven door as far as it will shut.

Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from the oven door frame.

The oven light(s) is a 40-watt appliance bulb. The light(s) will come on when the oven door is opened. The light(s) will not work during the Self-Cleaning cycle. When the oven door is closed, press OVEN LIGHT to turn the light(s) on or off.

To Replace:

Before replacing, make sure the oven is off and cool.

1.

Unplug range or disconnect power.

2.

Turn the glass bulb cover in the back of the oven counterclockwise to remove.

To Replace:

1. Insert both hanger arms into the door.

3.

Turn bulb counterclockwise to remove from socket.

4.

5.

Replace bulb and bulb cover by turning clockwise.

Plug in range or reconnect power.

For normal range use, it is not suggested to remove the oven door. However, if necessary, follow these instructions.

The oven door is heavy.

To Remove:

1.

Open oven door all the way.

2.

Flip up the hinge latch on each side.

2=

3.

Open the oven door.

You should hear a "click" as the door is set into place.

Move the hinge levers back to the locked position. Ensure that the door is free to open and close. If it is not, repeat the removal and installation procedures.

17

TROUBLESHOOTING

Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.

Nothing will operate

• Is the power supply cord unplugged?

Plug into a grounded outlet.

Has a household fuse been blown or has the circuit breaker been tripped?

Replace the fuse or reset the circuit.

Cooktop will not operate

• Is the control knob set correctly?

Push in knob before turning to a setting.

On ceramic glass models, is the "Cooktop Lockout" set?

See "Cooktop Lockout" section.

On coil element models, is the element inserted properly?

See "Coil Element and Burner Bowls" section.

Excessive heat around cookware on cooktop

• Is the cookware the proper size?

Use cookware about the same size as the surface cooking area, element or surface burner. Cookware should not extend more than 1 in. (2.5 cm) outside the cooking area.

Hot surface indicator light stays on

• Does the hot surface indicator light stay on after control knob(s) have been turned off?

See "Cooktop Controls" section.

Cooktop cooking results not what expected

• Is the proper cookware being used?

See "Cookware" section.

• Is the control knob set to the proper heat level?

See "Cooktop Controls" section.

• Is the appliance level?

Level the appliance.

See the Installation Instructions.

On coil element models, is the element inserted properly?

See "Coil Element and Burner Bowls" section.

Oven will not operate

• Is the electronic oven control set correctly?

See "Electronic Oven Control" section.

Has a delay start been set?

See "Timed Cooking" section.

• On some models, is the Control Lock set?

See "Control Lock" section.

Oven temperature too high or too low

• Does the oven temperature calibration need adjustment?

See "Oven Temperature Control" section.

On some models, does the cooling fan run during BAKE,

BROIL or CLEAN?

It is normal for the fan to automatically run when the oven is in use. These helps cool the electronic control.

Display shows messages

Is the display showing "PF"?

There has been a power failure. Clear the display. See

"Display(s)" section.

On some models, reset the clock, if needed. See "Clock" section.

Is the display showing a letter followed by a number?

Press OFF/CANCEL, OFF or CANCEL/OFF to clear the display. See "Display(s)" section.

If it reappears, call for service. See "Assistance or Service" section.

Self-Cleaning cycle will not operate

• Is the oven door open?

Close the oven door all the way.

Has the function been entered?

See "Self-Cleaning Cycle" section.

On some models, has a delay start Self-Clean cycle been set?

See "Self-Cleaning Cycle" section.

Has a delay start been set?

See "Timed Cooking" section.

Oven cooking results not what expected

• Is the appliance level?

Level the appliance.

See the Installation Instructions.

• Is the proper temperature set?

Double-check the recipe in a reliable cookbook.

Is the proper oven temperature calibration set?

See "Oven Temperature Control" section.

• Was the oven preheated?

See "Baking and Roasting" section.

• Is the proper bakeware being used?

See "Bakeware" section.

• Are the racks positioned properly?

See "Positioning Racks and Bakeware" section.

• Is there proper air circulation around bakeware?

See "Positioning Racks and Bakeware" section.

• Is the batter evenly distributed in the pan?

Check to make sure batter is level in the pan.

• Is the proper length of time being used?

Adjust cooking time.

• Has the oven door been opened while cooking?

Oven peeking releases oven heat and can result in longer cooking times.

• Are baked items too brown on the bottom?

Move rack to higher position in the oven.

• Are pie crust edges browning early?

Use aluminum foil to cover the edge of the crust.

18

ASSISTANCEORSERVICE

Before calling for assistance or service, please check

"Troubleshooting." It may save you the cost of a service call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you only use FSP® replacement parts. FSP® replacement parts will fit right and work right because they are made with the same precision used to build every new WHIRLPOOL ® appliance.

To locate FSP® replacement parts in your area, call our Customer

Interaction Center telephone number or your nearest Whirlpool designated service center.

Call the Whirlpool Customer Interaction Center toll free: 1-800-253-1301.

Our consultants provide assistance with:

• Features and specifications on our full line of appliances.

• Installation information.

• Use and maintenance procedures.

• Accessory and repair parts sales.

• Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.).

• Referrals to local dealers, repair parts distributors, and service companies.

Whirlpool designated service technicians are trained to fulfill the product warranty and provide afterwarranty service, anywhere in the United States.

To locate the Whirlpool designated service company in your area, you can also look in your telephone directory Yellow

Pages.

For further assistance

If you need further assistance, you can write to Whirlpool

Corporation with any questions or concerns at:

Whirlpool Brand Home Appliances

Customer Interaction Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

Accessories U.S.A.

To order accessories, call the Whirlpool Customer Interaction

Center toll free at 1-800-442-9991 and follow the menu prompts.

Or visit our website at www.whirlpool.com

Accessories Online." and click on "Buy

Canning Unit Kit

(coil element models)

Order Part #242905.

Dehydration Kit

(includes 3 racks and an oven door stop)

Order Part #4395974A96

Cooktop Polishing Creme

(ceramic glass models)

Order Part #4392916

Cooktop Scraper

(ceramic glass models)

Order Part #3183488

Stainless Steel Cleaner & Polish

(stainless steel models)

Order Part #4396095

19

Wtt[RLPOOL®COOKTOP,BUILT.IN OVENAND RANGEWARRANTY

ONE-YEAR FULL WARRANTY

For one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for FSP ® replacement parts and repair labor to correct defects in materials or workmanship.

Service must be provided by a Whirlpool Corporation designated service company.

SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CLEANTOP ® COOKTOP

On ceramic glass ranges and ceramic glass cooktops, in the second through fifth years from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, Whirlpool Corporation will pay for FSP ® replacement parts for the CLEANTOP ® ceramic glass cooktop.

Whirlpool Corporation warrants that the ceramic glass cooktop will not discolor, the cooktop pattern will not wear off, the rubber seal between the ceramic glass cooktop and porcelain edge will not crack, the ceramic glass cooktop will not crack due to thermal shock and the surface unit elements will not burn out.

Whirlpool Corporation will not pay for:

1.

Service calls to correct the installation of your appliance, to instruct you how to use your appliance, to replace house fuses or correct house wiring, or to replace owner-accessible light bulbs.

2.

Repairs when your appliance is used in other than normal, single-family household use.

3.

Pickup and delivery. Your appliance is designed to be repaired in the home.

4.

Damage resulting from accident, alteration, misuse, abuse, fire, flood, improper installation, acts of God or use of products not approved by Whirlpool Corporation.

5.

Repairs to CLEANTOP ® ceramic glass cooktop or other surfaces if they have not been cared for as recommended in the Use and

Care Guide.

6.

Repairs to parts or systems resulting from unauthorized modifications made to the appliance.

7.

Replacement parts or repair labor costs for units operated outside the United States.

8.

Any labor costs during the limited warranty period.

WHIRLPOOL CORPORATION SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

Outside the 50 United States, this warranty does not apply. Contact your authorized Whirlpool dealer to determine if another warranty applies.

If you need service, first see the "Troubleshooting" section of this book. After checking "Troubleshooting," additional help can be found by checking the "Assistance or Service" section or by calling the Whirlpool Customer Interaction Center, 1-800-253-1301 (toll-free), from anywhere in the U.S.A.

5/00

Keep this book and your sales slip together for future reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your appliance to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial number. You can find this information on the model and serial number label/plate, located on your appliance as shown in the

"Parts and Features" section.

Dealer name

Address

Phone number

Model number

Serial number

Purchase date

8300666A

© 2003 Whirlpool Corporation.

All rights reserved.

® Registered Trademark/TM Trademark of Whirlpool, U.S.A.

1/03

Printed in U.S.A.

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement