Declaration of Conformity
Hereby, Sharp Telecommunications of Europe Limited, declares that this 903SH is
in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
A copy of the original declaration of conformity can be found at the following
Internet address:
http://www.sharp-mobile.com
Introduction
Congratulations on your new 3G/UMTS 903SH phone.
About This User Guide
This user guide is carefully designed to help you learn about your
phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent written
records of all important data. Data may be lost or altered in virtually
any electronic memory product under certain circumstances.
Therefore, we assume no responsibility for data lost or otherwise
rendered unusable, whether as a result of improper use, repairs,
defects, battery replacement, use after the specified battery life
has expired or any other cause.
• We assume no responsibility, directly or indirectly, for financial
losses or claims from third parties resulting from the use of this
product and any of its functions, such as stolen credit card
numbers, the loss or alteration of stored data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user guide.
The information described in this user guide is subject to change
without notice.
• All the functions described in this user guide may not be supported
by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
• Occasionally, a few black or bright pixels may appear on the
screen. Please note that this will not have any impact on any of the
features or on performance.
Copyright
According to copyright laws, the reproduction, alteration and use of
material which is protected by copyright (music, pictures, etc.) is only
permitted for personal or private use. If the user is not in possession
of more extensive copyright or has not received the explicit
permission from the copyright owner to reproduce, alter or use a copy
which has been made or modified in this way, this is considered to be
a violation of the copyright laws and gives the copyright owner the
right to claim for damages. For this reason, avoid the illegal use of
material which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in the
United States and/or other countries.
Introduction
1
Powered by JBlend™ Copyright 1997-2005 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI Corporation
©2002-2005 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
Contains Macromedia® Flash™ technology by Macromedia, Inc.
Copyright © 1995-2005 Macromedia, Inc. All rights reserved.
Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are
trademarks or registered trademarks of Macromedia, Inc. in the United
States and other countries.
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
miniSD™ is a trade mark of SD Card Association.
is a registered trademark of
RealNetworks, Inc.
2
Introduction
CP8 PATENT
This product is licensed under the MPEG-4 Visual Patent Portfolio License for the
personal and non-commercial use of a consumer to (i) encode video in compliance
with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii) decode MPEG-4 Video
that was encoded by a consumer engaged in a personal and non-commercial
activity and/or was obtained from a licensed video provider. No license is granted or
implied for any other use. Additional information may be obtained from MPEG LA.
See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License for
encoding in compliance with the MPEG-4 Systems Standard, except that an
additional license and payment of royalties are necessary for encoding in connection
with (i) data stored or replicated in physical media which is paid for on a title by title
basis and/or (ii) data which is paid for on a title by title basis and is transmitted to an
end user for permanent storage and/or use. Such additional license may be obtained
from MPEG LA, LLC. See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Useful Functions and Services
Your phone offers you the following features:
• Video calls. You can talk while viewing each other on respective
screens.
• 3D and colour Java™ games and applications with a graphic
accelerator. You can also download various games and
applications from Vodafone via the mobile Internet.
• A built-in digital camera for taking pictures and video clips.
• A message function for reading and creating SMS messages.
• MMS (Multimedia Messaging Services) for personalising your
phone in various ways.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A colour WAP browser for accessing information on the mobile
Internet.
• Your own ringtones and ringvideos. You can use downloaded
sound or video clip files as a ringtone or ring video clip.
• A music player that can play back MP3, AAC and AAC+ format
sound files.
• Playback of the downloaded sound and video clip files.
• A voice recorder function for recording and playing back voice
clips.
• A Bluetooth ® wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An Infrared interface for data communication. You can transmit
pictures, sounds and video clips to OBEX-enabled phones.
• A data synchronisation function for updating Contacts List entries
on the Internet.
• A schedule alarm for creating and sending schedule entries with
alarm settings.
• Video output. You can connect your phone to other devices, such
as TVs or videos set to output, and display Java™ data, images,
or video clips.
• With the built-in digital camera, you can read texts and barcodes,
and create QR codes.
• A miniSD™ memory card slot that expands connectivity with a PC
using the memory card.
Introduction
3
Contents
Introduction .......................................................................1
Your Phone ........................................................................7
Getting Started ..................................................................8
Inserting the SIM Card and the Battery .......................11
Removing the SIM Card and the Battery .....................12
Charging the Battery .................................................13
Inserting the Memory Card ........................................14
Removing the Memory Card ......................................14
Connecting the Stereo Handsfree ...............................15
Turning Your Phone On and Off .................................15
Keypad Lock .............................................................15
Display Indicators .....................................................16
Opening Your Phone .................................................17
Navigating Functions ......................................................19
Using in the Normal Position of the Display .................19
Voice Call/Video Call Functions ......................................20
Making a Voice Call ..................................................20
Speed Dialling ..........................................................21
Redialling .................................................................21
Answering a Voice Call ..............................................21
In Call Menu (Voice Call) ............................................22
Making a Video Call ..................................................25
Answering a Video Call ..............................................26
In Call Menu (Video Call) ...........................................26
4
Contents
Entering Characters ....................................................... 29
Changing the Input Language ................................... 30
Changing the Input Mode ......................................... 30
My Dictionary .......................................................... 30
Using Templates ...................................................... 31
Using the Menu .............................................................. 32
Main Menu .............................................................. 32
Shortcut Keys .......................................................... 33
Contacts List ................................................................... 34
Changing the Name Order ........................................ 34
Changing the List Displayed ..................................... 34
Selecting the Storage Memory .................................. 34
Sorting the Contacts List Entries ............................... 35
Add New Contact ..................................................... 35
Viewing My Contact Details ...................................... 35
Copying Contacts List Entries between SIM Card and
Handset .................................................................. 35
Finding a Name ....................................................... 36
Dialling from the Contacts List .................................. 36
Editing Contacts List Entries ..................................... 36
Assigning a Ringtone or a Ring Video Clip to Each
Entry ....................................................................... 37
Deleting Contacts List Entries ................................... 37
Manage Category ..................................................... 37
Contact Groups ........................................................ 38
Memory Status .........................................................39
Speed Dial List .........................................................39
Sending a Contacts List Entry ....................................39
Receiving a Contacts List Entry ..................................39
Sending a Voice Clip Message or Video Clip Message
Using an Address from the Contacts List ....................40
Synchronising Contacts List Entries with those on the
Internet ....................................................................40
Camera ............................................................................41
Taking Pictures ........................................................41
Recording Video Clips ...............................................42
Using the Options Menu in the Viewer Position of the
Display ....................................................................42
Common Functions in the Photo and Video Camera
Modes .....................................................................42
Functions in the Photo Camera Mode ........................45
Functions in the Video Camera Mode .........................47
Messaging .......................................................................49
SMS ........................................................................49
MMS .......................................................................49
Email .......................................................................49
Creating a New Message ..........................................50
Messaging Settings ..................................................56
Vodafone live! .................................................................60
Navigating a WAP Page ............................................61
Music ...............................................................................63
Music Player ............................................................63
My Items ..........................................................................65
Pictures ...................................................................65
Sounds & Ringtones .................................................66
Videos .....................................................................67
Other Documents .....................................................67
Common Option Menus ............................................68
Games & Applications ...............................................71
Text Templates .........................................................71
Memory Status .........................................................71
Entertainment .................................................................72
Games & Applications ...............................................72
Settings ...................................................................74
TV & Video ...............................................................76
Organiser & Tools ...........................................................80
Calendar ..................................................................80
Alarms .....................................................................83
Calculator ................................................................84
Voice Recorder .........................................................85
Scanner ...................................................................86
E-Book ....................................................................87
Stopwatch ................................................................88
Tasks ......................................................................88
World Clock .............................................................90
Countdown Timer .....................................................90
Expenses Memo .......................................................90
Phone Help ..............................................................91
Contents
5
SIM Application ...............................................................92
Settings ...........................................................................93
Profiles ....................................................................93
Setting the Display ....................................................97
Sound Settings .......................................................100
Date & Time ...........................................................100
Language Setting ....................................................101
Call Settings ...........................................................102
Video Call Settings ..................................................106
Security .................................................................107
Master Reset ..........................................................108
Call Log ..........................................................................109
Call Timers .............................................................109
Data Counter ..........................................................109
Call Costs ...............................................................110
Connectivity ...................................................................111
Bluetooth ...............................................................111
Infrared ..................................................................113
Network Settings ....................................................114
Flight Mode ............................................................115
Internet Settings .....................................................115
Memory Card .........................................................116
Connecting 903SH to Your PC .......................................118
System Requirements .............................................118
3G/GSM Modem .....................................................118
Handset Manager ...................................................119
Software Installation ................................................119
Note ......................................................................119
6
Contents
Troubleshooting ........................................................... 120
Safety Precautions and Conditions of Use .................. 122
CONDITIONS OF USE .............................................. 122
ENVIRONMENT ...................................................... 125
PRECAUTIONS CONCERNING VEHICLE USE ............. 125
SAR ...................................................................... 125
INFORMATION ON PROPER DISPOSAL .................... 126
PRECAUTIONS FOR USE IN USA .............................. 127
Specifications and Optional Accessories .................... 129
Specifications ........................................................ 129
Optional Accessories .............................................. 129
Index ............................................................................. 130
List of Menu Functions ................................................. 132
Your Phone
Please check the following carefully. Your phone should come
complete with:
• 3G (UMTS)/GSM 900/1800/1900/GPRS phone
• Lithium-Ion Battery
• Battery Cover
• AC Charger
• Stereo Handsfree
• User Guide
• Quick Start Guide
• CD-ROM
• miniSD™ Memory Card
• Video Cable
Your Phone
7
Getting Started
21
9
1
19
22
10
2
20
3
11
12
4
13
14
15
5
6
7
16
17
18
8
8
Getting Started
23
24
24
25
26
27
28
29
30
31
32
1. Earpiece
2. Navigation Keys (Arrow Keys):
abcd
Moves cursor to highlight a menu
item, etc.
Up/Down arrow keys:
Displays Contacts List entries in
standby.
Left arrow key:
Displays the message inbox in
standby.
Right arrow key:
Displays the monthly or weekly
calendar in standby.
3. Centre Key:
Displays Main menu in standby, and
executes functions.
4. Left Soft Key:
A
Executes the function in the lower left
of the screen.
Displays Messaging menu in standby.
5. Send/Redial Key:
D
6. Shortcut Key:
S
7. Voicemail Key:
G
Makes or accepts calls, displays the
call logs in standby.
Opens the shortcut menu to access
the desired applications.
Press and hold to connect to the
Voicemail centre (depending on the
SIM card).
8. * /Shift Key:
P
Switches character case between
four modes: Abc, ABC, 123 and abc
on the text entry screen.
Press in standby to enter P, ?, – or *.
Press and hold in standby to lock the
keypad.
9. Sub Camera (Internal Camera)
10. Main Display
11. Microphone (for the viewer position of the display)
12. Right Soft Key:
Executes the function in the lower
right of the screen.
C
Accesses “Vodafone live!” by opening
the browser in standby.
13. End/Power Key:
F
14. Clear/Back Key:
U
Ends a call and turns power on/off.
15. Music Key:
E
16. Keypad
Displays Music menu in standby.
Clears the characters to the left of the
cursor, returns to the previous
screen, etc.
Getting Started
9
17. #/Silent Key:
R
Displays symbol screen on the text
entry screen.
Press and hold to switch languages
on the text entry screen.
Turns the flash/auxiliary light on or off
in camera mode.
Press and hold in standby to switch
Profiles settings between the mode
most recently activated and Silent
mode.
27. Menu Key:
X
Executes the function in the lower left
of the screen in the viewer position of
the display.
28. Camera Key:
Y
Displays the Main menu when
pressed in standby, then executes a
highlighted function in the viewer
position of the display.
Press and hold to activate the
camera.
Press during an incoming call alert to
answer the call in the viewer position
of the display.
29. Cancel Key:
Z
Executes the function in the lower
right of the screen in the viewer
position of the display.
Press and hold in standby to turn the
mobile light on. You can change the
light colours by pressing V or W
when the mobile light is on.
Press and hold to reject an incoming
call.
Press during an incoming call alert to
send a busy tone to the caller in the
viewer position of the display.
Press to end the call in the viewer
position of the display.
18. Microphone
19. Camera (External Camera)
20. Battery Cover
21. Built-in Aerial:
Warning: Do not cover the top of the
phone with your hand when in use as
this may interfere with the
performance of the built-in aerial.
22. Mobile Light:
Used as a flash or an auxiliary light in
camera mode.
23. Infrared Port:
Sends and receives data via infrared.
24. Stereo Speakers
10
25. Small Light:
Used for the battery charge indicator,
Event Light and Status Light.
26. Side Keys (V/W):
(These two keys work in reverse with
the viewer position of the display.)
Moves the highlight up or down.
Press in standby or during a call to
increase or decrease the earpiece
volume.
Getting Started
3. Hold the battery so that the metal contacts of the battery are
30. Memory Card Slot Cover
31. VIDEO OUT/Stereo Handsfree Connector
32. External Connector:
Used to connect either the charger or
a USB data cable.
Inserting the SIM Card and the Battery
1. Slide off the battery cover (
).
facing down, slide the guides on the top of the battery into the
battery slot ( ), and then insert it ( ).
4
3
1
2
4. Replace the battery cover.
Note
• Make sure that only 3V SIM cards are used.
• Make sure that the standard accessory battery (XN-1BT70) is
used.
2. Slide the SIM card into the SIM holder.
SIM card
Getting Started
11
Removing the SIM Card and the Battery
1. Ensure that the phone is turned off and that the charger and
other accessories are disconnected. Slide off the battery
cover.
2. Lift the battery using the protruding edge and remove the
battery from the phone.
3. Hold
holder (
down gently while sliding the SIM card out of the SIM
).
2
12
Getting Started
1
Battery Disposal
The device is battery-powered. In order to protect the environment,
please read the following points concerning battery disposal:
• Take the used battery to your local waste depot, dealer or customer
service centre for recycling.
• Do not expose the used battery to a naked flame, immerse in water
or dispose with the household waste.
Charging the Battery
You must charge the battery for at least 140 minutes before using
your phone for the first time.
Using the Charger
1. Open the cover of the external connector, connect the charger
to the external socket located at the bottom of the phone by
pressing both sides indicated with arrows, and connect to an
AC outlet.
To Disconnect the Charger
When charging is complete, the small light turns off.
1. Unplug the charger from the AC outlet, then unplug the
charger connector from the phone.
2. Close the cover.
Note
• Do not use any non-approved chargers as they may damage your
phone and invalidate any warranties, see “Battery” on page 122
for details.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for charging
from the cigarette lighter socket of a car.
Small light
Battery Level Indicator
The current battery level is displayed in the upper right of the main
display.
The small light turns on.
Standard charging time: Approx. 140 minutes
Note
• Charging time may vary depending on the state of the battery and
other conditions. (See “Battery” on page 122.)
Getting Started
13
Low Battery during Use
When the battery is running low, an alarm will sound and “
” is
displayed on the main display.
If you are using your phone and you hear the low battery alarm, attach
your charger as soon as possible. The phone may not be able to
continue normal operation if you continue to use it.
Battery Indicators
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
Inserting the Memory Card
1. Turn off the phone.
2. Open the memory card slot cover and insert the card with the
label side facing up.
3. Insert the memory card all the way in until it clicks.
4. Close the cover.
14
Getting Started
Note
• Make sure that the phone is turned off before inserting the memory
card.
• Be sure to insert the card in the correct direction and orientation.
• Do not open the memory card cover while the memory card is
being formatted or written to. The card may be damaged beyond
use.
• Keep all memory cards out of the reach of small children.
Tip
• You see the following indicators when the memory card is in use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.
Removing the Memory Card
1. Open the memory card slot cover and slightly push the card so
it pops out. Remove the card and close the cover.
Note
• Make sure that the phone is turned off before removing the
memory card.
• Do not remove the memory card while the memory card is being
formatted or written to.
Connecting the Stereo Handsfree
1. Open the cover of the Stereo Handsfree Connector.
2. Connect the Stereo Handsfree.
Note
• If your PIN code is entered incorrectly three times in a row, the SIM
card is locked. See “Enabling/Disabling the PIN Code” on
page 107.
• If the clock settings have not been entered, the date and time entry
screen is displayed (p. 100).
To Copy All Contacts List Entries from the SIM Card
When you insert the SIM card into your phone for the first time and
start the Contacts List application, you are asked whether you wish to
copy Contacts List entries on the SIM card. Follow the on-screen
instructions, or you can do it later using the Contacts List menu as
follows:
“Contacts” → “Manage Contacts” → “Copy All Entries”
1. Select “From SIM to Handset”.
Keypad Lock
You can lock the keypad to prevent it from being pressed accidentally.
Turning Your Phone On and Off
To turn the power on or off, press and hold F for approximately 2
seconds.
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal Identification
Number) code and handset lock code after turning on your phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press
.
Locking the Keypad
1. Press and hold P in standby.
To unlock, press and hold P.
Tip
• Emergency numbers (112, etc.) can be entered and dialled
regardless of the keypad lock.
Getting Started
15
Display Indicators
Indicator area
Left soft
key
1.
/
Centre key
: Strength of received signal/Service out of range
: GSM/GPRS
: Roaming outside network
Getting Started
:
3.
:
Flight mode
4.
/
:
5.
/
:
6.
/
/
7.
/
:
8.
:
9.
/
10.
:
11.
12.
Data exchange with external device
Connection to the server [established/
communicating]
Voice call [incoming/in progress]
: Video call communication mode enabled [voice and
video/voice/video]
Alerts [text message and multimedia message/
Email]
“Voice Calls” diverts set to “Always”
/
: WAP/OTA provisioning alerts [WAP alert/OTA
provisioning alert/WAP and OTA provisioning alerts]
/
/
/
/
:
Memory card inserted
Right soft
key
: 3G (UMTS)/GPRS
16
2.
/ :
Connection status
[USB cable/Infrared exchanging information/
Bluetooth wireless setting [enabled (in standby or
except in standby)/exchanging information/talking
with the Bluetooth headset]]
Java™ application [executed (colour)/suspended
(grey)]
13.
:
14.
/
15.
/
/
/
/
Secure WAP page displayed
Opening Your Phone
/ :
Silent/vibration setting [silent/increasing volume/
vibration enabled/silent and vibration enabled/
increasing volume and vibration enabled]
Your phone can be opened in the following three positions: normal,
self-portrait and viewer positions.
: Speaker mode [speaker phone/speaker activated/
microphone muted]
16. (No display)/
/ / / / :
Current profile [Normal/Meeting/Activity/Car/
Headset/Silent]
17.
Battery level
:
Normal Position ( )
1. Open the phone until the display stops as illustrated.
18.
:
19.
:
Mobile light enabled
20.
/
21.
:
Outbox contains unsent messages [text message/
multimedia/Email]
22.
:
Voicemail message alert
23.
:
Function Lock enabled
24.
:
Keypad Lock enabled
25.
/(blank): Infrared setting [enabled/disabled]
26.
:
Daily alarm enabled
:
Schedule entry enabled [with/without reminder
alarm]
Secret mode set to “On”
Getting Started
17
Self-portrait Position (
)
2. Turn the display 180° clockwise.
Use this position to take a self-portrait with the external camera.
Do not turn the display anticlockwise as this may damage it.
18
Getting Started
Viewer Position ( )
3. Close the main display toward the keypad.
Note
• Operations of V and W are reversed in the viewer position of the
display.
• Keypad operations cannot be performed in the viewer position of
the display.
• Be careful not to carry the phone in the viewer position of the
display as this may damage the display.
Navigating Functions
Using in the Normal Position of the Display
All applications are accessed from the Main menu. To open the Main
menu, press the centre key ( ) in standby.
To launch applications, you will need to highlight menu items, and
make selections. To select a menu item (indicated in quotation
marks), move the cursor using a, b, c and d, and press
to
select.
In certain procedures, you will need to press one of the soft keys
(indicated in square brackets), which are displayed in the lower left
and right of the screen. Press the corresponding soft key (A or C).
To return to the previous screen, press the right soft key if it displays
Back. To close the Main menu, press the right soft key if it displays
Exit.
Each section in this user guide starts with a list of items you will need
to select in order (indicated in italics) before performing the
procedures shown. Select each item to reveal the next set of items
that you have to choose from. Open subsection items after opening
those listed in the main section.
Example:
“Contacts” → “Contacts List” → “Add New Contact”
Using in the Viewer Position of the Display
Available keys in viewer position of the display are V, W, X,
Y and Z.
To open the Main menu, press Y in standby.
To select a menu item (indicated in quotation marks), press V or W,
and press Y to select.
In certain procedures, you will need to press one of the soft keys
(indicated in square brackets), which are displayed in the lower left
and right of the screen. The left soft key is X and the right soft key
is Z.
The side keys function in camera mode as follows:
Zoom-in/Zoom-out
V/ W:
X:
Options
Y: Capture
Z:
Switches between the photo camera and video camera
modes.
Navigating Functions
19
Voice Call/Video Call Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to dial
and press D to dial.
If you enter the wrong number, press U to delete the number
to the left of the cursor.
Emergency Calls
1. Enter 112 (international emergency number) using the keypad
and press D to dial.
Note
• Emergency calls may not be able to be made on all mobile phone
networks when certain network services and/or phone features are
in use. Contact your service provider for more information.
• This emergency number can normally be used to make an
emergency call in any country, with or without a SIM card inserted,
if a 3G (UMTS)/GSM network is within range.
International Calls
1. Press and hold Q until a + (international dialling prefix)
sign is displayed.
2. Enter the country code, followed by the area code (without the
leading zero) and the phone number, and press D to dial.
20
Voice Call/Video Call Functions
Adding an Entered Phone Number to the Contacts List
1. After entering a phone number, press [Options] and select
“Save Number”.
For details on creating a new entry, see “Add New Contact” on
page 35.
Showing or Hiding My Phone Number on the Display of the
Called Party
1. After entering a phone number, press [Options] and select
“Show My ID” or “Hide My ID”.
Making a Call Using the Contacts List in the Viewer Position
of the Display
1. Press Y.
2.
3.
4.
5.
6.
Select “Contacts”.
Select “Contacts List”.
Select the entry you wish to call.
Select the phone number.
Select “Call” to dial.
To end a call, press Z.
Speed Dialling
Answering a Voice Call
Up to 8 phone numbers from the Contacts List memory (Handset and
SIM) can be assigned to speed dials. You can call the numbers using
the digit keys (G to O). The phone number of the Voicemail
centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List” on
page 39.
1. To dial a number using the speed dial, press and hold any of
the digit keys (G to O).
The phone number saved in the speed dial list is dialled.
When an incoming call is detected, the phone rings.
1. Press D,
or press [Options] and select “Answer” to
answer the call.
Or press any key except F, U and [Busy] when the “Any Key
Answer” function is enabled. Set the Any Key Answer function in
the profile of each mode (p. 97).
Redialling
You can redial numbers in the call log. Select from specific categories
or “All Calls”. Specific categories contain up to 30 numbers and the
“All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
Tip
• If you have subscribed to the Calling Line Identification (CLI) service
and the caller’s network sends the number, the caller’s number is
displayed on the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name and phone number are
displayed on the screen.
• If the number is a restricted number, the display shows “Withheld”.
• When you receive a call from the person whose picture is
registered in the Contacts List, the picture, name and phone
number are displayed.
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial the call.
Voice Call/Video Call Functions
21
Answering a Call in the Viewer Position of the Display
1. Press X or Y to answer the call.
To end a call, press Z.
To reject the incoming call, press and hold Z.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not
wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy tone to
the caller.
In Call Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
You can adjust the earpiece volume (and handsfree volume, if
connected) from five levels.
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or press
W (or b/c) to decrease the volume.
3. Press
22
when the volume is set to the desired level.
Voice Call/Video Call Functions
Tip
• In the viewer position of the display, press X or Y to display
the in call menu.
• In the viewer position of the display, use V or W to increase or
decrease the earpiece volume. Operations of these keys are
reversed in the viewer position.
Turning the Speakers On and Off
You can talk via the loudspeakers on the sides of the phone when it
is on.
1. During a call, press [Options] and select “Loudspeaker On”.
Putting a Call on Hold
This function allows you to manage two calls at the same time. If you
wish to make another call while you are talking to someone, you can
put the current call on hold to call someone else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call to, then
press D.
Tip
• You can also make another call by entering the phone number
during a call instead of step 1. The current call is automatically put
on hold.
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messaging”.
The following options are available: “Create Message” to make
an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to access these
folders. For details on SMS, see “SMS” and “MMS” on page 49.
Note
• You need to set “Call Waiting” to “On” if you wish to use the Call
Waiting service (p. 103).
• Call Waiting service may not be available on all networks. Contact
your service provider for more information.
• If you do not wish to answer the second call, press [Options] and
select “Busy” in step 1. If “Reject” is selected, the log of the
second call is saved as a missed call.
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi Party”.
2. Select “Conference All” to join the conference call.
3. Press F to end the conference call.
Call Waiting
This service notifies you of another incoming call while you have a call
in progress.
1. During a call, press [Options] and select “Hold & Answer” to
answer the second call.
The first call is put on hold and you can now talk to the second
caller.
Voice Call/Video Call Functions
23
Note
• The conference call service may not be available on all networks.
Contact your service provider for more information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold, select
“Private”.
• To end the call with all participants, select “End Active Call(s)”
or “End Held Call(s)”.
• To reject adding more participants to the current party, press
[Options] and select “Reject”, or you can send the busy tone by
selecting “Busy”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference call
and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you wish to
disconnect from the conference call.
2. Press [Options] and select “End This Call”.
24
Voice Call/Video Call Functions
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the participants,
you may select the participant from the conference list and put the
other participants on hold.
1. During a conference call, select the person that you wish to
talk to.
2. Press [Options] and select “Multi Party”.
3. Select “Private”.
4. Once you have finished the private conversation, press
[Options] and select “Multi Party”.
5. Select “Conference All” to return to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To use the microphone again, press [Unmute].
Making a Video Call
Note
• Use this function with only the video call enabled phones.
• Make sure that the battery is fully charged and the signal is strong
before using this function.
• Turn the loudspeakers on or use a switch-equipped Stereo
Handsfree or handsfree kit so that you can talk while looking at the
video call screen on the main display.
2
Making a Video Call
1. Enter the area code and the phone number you wish to dial.
2. Press [Options] and select “Video Call” or press and hold D
to dial.
If you enter the wrong number, press U to delete the number
to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
• If the called party’s phone is not video call enabled, you can press
F and enter the phone number again to make a voice call.
• When the call ends, the last call cost is displayed.
3
1
4
Status Indicators
1. Sub screen for your image
2. Elapsed time
3. Main screen for the calling party’s screen
4. Calling party’s name or phone number
Voice Call/Video Call Functions
25
Answering a Video Call
When an incoming call is detected, the phone rings.
1. Press D to answer the call with video or press [Options] and
select “Hide Picture” to answer with voice only.
Tip
• When the call ends, the call cost is displayed.
• If you have subscribed to the Calling Line Identification (CLI) service
and the caller’s network sends the number, the caller’s number is
displayed on the screen. If the caller’s name and number are saved
in the Contacts List, the caller’s name is displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you do not
wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy tone to
the caller of an incoming call letting them know that you
cannot answer the call.
In Call Menu (Video Call)
Muting the Microphone
1. During a video call, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub screens.
1. During a video call, press [Options] and select “Switch
Images”.
26
Voice Call/Video Call Functions
Tip
• You can also swap images between the main and sub screens by
pressing
during a video call.
Changing the Image of Yourself
1. During a video call, press [Options] and select “Camera
Picture”.
2. Select “Internal Camera”, “External Camera” or “Alternative
Image”.
“Internal Camera”:
“External Camera”:
“Alternative Image”:
The image through the sub camera is
displayed and sent to the caller.
The image through the camera is
displayed and sent to the caller.
The camera is turned off and the
image selected in “Alternative Image”
of “Video Call Settings” is used.
Tip
• You can also switch the image shown to the caller by pressing c
or d during a video call.
Using the Optical Zoom Function
The optical zoom enables you to zoom the picture more clearly by the
actual zooming action of the optical lens. The optical zoom is used up
to the [×2] zooming ratio. If the zoom exceeds [×2], the digital zoom
is used to further magnify.
1. During a video call, press [Options] and select “Enable Opt.
Zoom”.
2. Press a or b.
Turning the Speakers On and Off
You can talk via the loudspeakers on the sides of the phone when it
is on.
1. During a video call, press [Options] and select “Loudspeaker
On”.
Video Call Settings
To Adjust the Quality of the Incoming or Outgoing Image
You can adjust the quality of the called party’s or caller’s image.
1. During a video call, press [Options] and select “Video Call
Settings”.
2. Select “Incoming Picture Quality” or “Outgoing Picture
Quality”.
3. Select “Normal”, “Quality Priority” or “Frame Rate Priority”.
“Normal”:
“Quality Priority”:
“Frame Rate Priority”:
The standard quality is used.
The quality of the picture takes
precedence over the frame rate.
The frame rate takes precedence over
the quality.
Note
• In a high-noise environment, you may not be able to continue a
call, or make a clear call. We recommend that you use the Stereo
Handsfree.
• With this option, there may be interruption if you increase the
earpiece volume. We recommend that you decrease the earpiece
volume or use the Stereo Handsfree.
Voice Call/Video Call Functions
27
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video call, press [Options] and select “Video Call
Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal Setting”.
When “Always On” is selected, the backlight will always be on
during a video call.
When “As Normal Setting” is selected, the backlight will time out
depending on the Backlight setting (p. 99).
To Adjust the Video Exposure
1. During a video call, press [Options] and select “Video Call
Settings”.
2. Select “Exposure”.
3. Press a or b.
Mirror Image
During a video call, you can reverse your image on the sub screen.
1. During a video call, press [Options] and select “Video Call
Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
28
Voice Call/Video Call Functions
To Change the Sub Camera Image to the Alternative Image
During a video call, you can switch the image shown to the caller
between the sub camera image and an alternative image or display
an image while putting a call on hold from the saved picture files.
1. During a video call, press [Options] and select “Video Call
Settings”.
2. Select “Alternative Image” or “Hold Guidance Picture”.
3. Select “Preset Picture” or “My Pictures”.
Entering Characters
Key
When entering characters to create Contacts List entries, text
messages or multimedia messages, etc., press the corresponding
keys.
In multi-tap input method, press each key until the desired character
is displayed. For example, press H once for the letter A or twice
for the letter B.
Table of Characters
Pressing each key scrolls characters in the following order. The order
varies depending on the language selected.
English Mode
Upper Case
Characters
Key
G
H
I
J
K
L
M
N
Lower Case
Characters
O
Q
P
R
Numeric
. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ :1
1
ABC2
abc2
2
DEF3
def3
3
GHI4
ghi4
4
JKL5
jkl5
5
MNO6
mno6
6
PQRS7
pqrs7
7
TUV8
tuv8
8
Upper Case
Characters
Lower Case
Characters
WXYZ9
wxyz9
Numeric
9
(space) + = < > € £ $ ¥ % & 0
0
Switches character case between four modes:
Abc, ABC, 123 and abc.
. , ?
@ ' "
% / ˜
¿ ¡ ^
Æ å ä
Ñ ñ Ö
ù ∆ Φ
Ξ (space)
!
(
<
[
æ
Ø
Γ
↵
:
)
>
]
à
ö
Λ
;
_
§
{
Ç
ø
Ω
&
=
}
É
ò
Π
+
€
\
¤
è
ß
Ψ
#
£
|
Å
é
Ü
Σ
∗
$
¥
Ä
ì
ü
Θ
G-O: Press and hold to enter numbers 1 - 9 and 0.
Q
Press and hold to shift between multi-tap and T9
P:
R:
mode.
Press and hold to display the Input Language
screen.
Entering Characters
29
Changing the Input Language
1. On the text entry screen, press [Options] and select “Input
Language”.
2. Select the desired language.
2. Select the desired symbol.
Changing the Input Mode
My Dictionary
T9 Text Input
T9 text input method is a shortcut to enter text easily and quickly.
1. On the text entry screen, press and hold P to enter T9
mode.
2. Select “Add New Word” and enter a new word.
2. Press [Options] and select “Input Mode”.
3. Select the input mode (Abc, ABC, 123, abc).
4. Press each key once for any letter you require on that key.
To enter the word “How”, press J L O.
5. If the word shown isn’t the one you want, press a or b until
you highlight the correct one.
6. Press
to select the word.
Note
• If the correct word is not shown in step 5, enter the correct word
again after switching to the multi-tap input method.
Tip
• If you press Q instead of step 6, a space is inserted next to the
selected word.
30
Symbols and Punctuation
1. On the text entry screen, press [Options] and select “Add
Symbol”.
Entering Characters
You can create your own word list for T9 text input.
1. On the text entry screen in T9 mode, press [Options] and select
“My Dictionary”.
Editing a Word in the List
1. On the text entry screen in T9 mode, press [Options] and select
“My Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
Using Templates
You can use the phrases registered in Text Templates when entering
characters.
For details on creating the text template, see “Adding Phrases to Text
Templates” on page 71.
1. On the text entry screen, move the cursor to the point you wish
to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be cut, then
press
.
4. Move the cursor to the last letter to highlight the area, then
press
.
5. Move the cursor to the point you wish to paste the letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
Entering Characters
31
Using the Menu
Main Menu
Using the Menu in the Viewer Position of the Display
1. Set the phone in the viewer position of the display.
2. Press Y to display the Main menu.
3. Press V or W to move the cursor up or down, then press X
or Y.
Press Z to return to the Main menu.
The cursor moves the same as in the normal position of the
display by using V and W.
For details on the functions of these keys, see page 10.
1. Press
in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu, then
press
to access the function.
For details on the menu options, see “List of Menu Functions” on
page 132.
32
Using the Menu
Shortcut Keys
You can access menus by pressing
and digit keys for the
corresponding number on the Main menu. For numbers 10 to 12,
press
and P (10), Q (11) or R (12). See “List of Menu
Functions” on page 132.
Shortcuts are listed in the headings of this user guide.
Examples:
To Access “Videos” Sub Menu (M 6-4) Using
Shortcut Keys
Press
L J.
To Access “Totals” Sub Menu (M 7-11-2) Using
Shortcut Keys
Press
M Q H.
To Access “Vibration” Sub Menu (M 12-3-4) Using
Shortcut Keys
Press
R I J.
Note
• The shortcut keys work for the first three menu levels only.
Using the Menu
33
Contacts List (M 8-1)
34
Items Saved in the SIM Memory (depending on the SIM card)
You can store the phone numbers and Email addresses of your
friends, family and colleagues in the Contacts List.
Your phone can store up to 500 entries. In a Contacts List, you can
save the following items:
Name
up to 16 characters
Telephone Number
up to 2 phone numbers (up to 32 digits
each)
Email Address
up to 128 characters (or no Email address)
Items Saved in the Handset Memory
Category
up to 16 categories
First Name
up to 16 characters
Last Name
up to 16 characters
Telephone Number
up to 3 phone numbers (up to 32 digits
each)
“Contacts” → “Settings” → “Name Order”
1. Select “First-Last Name” or “Last-First Name”.
Email Address
up to 3 Email addresses (up to 128
characters each)
Changing the List Displayed (M 8-8-2)
Category
16 categories
Street & Number
up to 64 characters
Changing the Name Order (M 8-8-1)
“Contacts” → “Settings” → “Contacts Location”
1. Select “Handset” or “SIM”.
City
up to 64 characters
Selecting the Storage Memory (M 8-8-3)
State/Province
up to 64 characters
Postal Code
up to 20 characters
“Contacts” → “Settings” → “Save New Contact to”
1. Select “Handset”, “SIM” or “Choose before Saving”.
Country
up to 32 characters
Note
up to 256 characters
Birthday
(date)
Picture
(file name)
Assign Tone/Video
(file name)
Secret
(On or Off)
Contacts List
Tip
• “Choose before Saving” prompts you to choose the memory every
time you save a new entry.
Sorting the Contacts List Entries (M 8-8-4)
Viewing My Contact Details (M 8-5)
Add New Contact
Copying Contacts List Entries between SIM Card
and Handset (M 8-9-1)
You can change the order of the Contacts List entries to alphabetical
order or order by category.
“Contacts” → “Settings” → “Sort Contacts”
1. Select “By Alphabet” or “By Category”.
You can choose either the phone or SIM card memory locations to
store the new entry. For switching locations, see “Selecting the
Storage Memory” on page 34.
The amount of phone numbers that you can store to the SIM card is
dependent on its capacity. Contact your service provider for details.
“Contacts” → “Contacts List” → “Add New Contact”
If you select the “Choose before Saving” option for the memory to be
used, the selection is between “To Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the relevant
information.
You can register and edit your own contact as with other Contacts List
entries.
“Contacts” → “My Contact Details”
“Contacts” → “Manage Contacts” → “Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to SIM”.
Note
• When you insert the SIM card into your phone for the first time and
start the Contacts List application, the confirmation screen is
displayed automatically, asking you if you wish to copy or not. The
number of Contacts List entries to be copied varies depending on
the SIM capacity.
• If the memory space is not enough to save all entries, you cannot
complete copying.
2. Press [Save] when finished.
Tip
• To create an entry, at least one field must be filled (“First Name”,
“Last Name”, “Telephone Number” or “Email Address” for the
handset memory; “Name”, “Telephone Number” or “Email
Address” for the SIM memory).
Contacts List
35
Finding a Name
“Contacts” → “Contacts List”
1. Enter the first few letters of the name.
Search results are displayed in alphabetical order.
Tip
• You can select the Contacts location from “Handset” or “SIM”
before searching.
Dialling from the Contacts List
“Contacts” → “Contacts List”
1. Highlight the desired entry and press D.
Tip
• If more than one phone number is registered for the entry, highlight
the desired phone number after step 1 and press D.
• You can also dial from the details screen of the Contacts List. On
the details screen, select the desired phone number and press D.
Editing Contacts List Entries
“Contacts” → “Contacts List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Modify the information.
4. Press [Save] when finished.
36
Contacts List
Adding a Thumbnail to Entries
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2.
3.
4.
5.
6.
Press [Options] and select “Edit”.
Select “Picture”.
Select “Assign Picture”.
Select the desired picture.
Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the corresponding
thumbnail is also deleted.
Assigning a Ringtone or a Ring Video Clip to Each
Entry
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3. Select “Assign Tone/Video”.
4. Select “For Voice Call”, “For Video Call” or “For New
Message”.
5. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 7.
6. Select “Preset Sounds” or “My Sounds”.
7. Select the desired tone or video clip.
8. Press [Save] when finished.
Deleting Contacts List Entries
Deleting All Contact Entries (M 8-9-3)
“Contacts” → “Manage Contacts” → “Delete All Entries”
1. Select “Handset Entries” or “SIM Entries”.
Manage Category (M 8-3)
Different ringtones can be set for each category. If you do not change
a category ringtone, the ringtone assigned in the Profiles menu is
used.
“Contacts” → “Manage Category”
1. Highlight the desired category.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Call” or “For New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “My Sounds”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip, see
“Assigning a Ringtone” or “Assigning a Ring Video Clip File” on
page 94.
Note
• You can only edit category names in the SIM card. You cannot edit
the ringtone or ring video settings.
2. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
Deleting a Contact Entry
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Contacts List
37
Editing the Category Name
You can edit category names to be assigned to the Contacts List
entries. First, change the Contacts List displayed (p. 34).
“Contacts” → “Manage Category”
1. Highlight the desired category name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Contact Groups (M 8-6)
You can create a mailing list to send the same message to a group of
recipients at once. Up to 5 groups can be registered.
Creating a New Mailing List
“Contacts” → “Contact Groups” → “Add New Group”
1. Enter the group name.
The new group name is displayed following the last group on the
Group List screen.
Adding Recipients to a Group
Up to 20 recipients can be registered in each list.
“Contacts” → “Contact Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
38
Contacts List
Tip
• If you modify the entry assigned in the group, you need to reassign it to the group. Press [Options] and select “Re-assign
Entry” in step 2.
• To remove an entry from the group, press [Options] and select
“Remove Entry” in step 2.
• To remove a group, highlight a group name and press [Options]
and then select “Delete” in step 1.
Sending a Message Using a Mailing List
“Contacts” → “Contact Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
3. Select the desired type of messaging.
For further procedures, see “Creating a New Message” on
page 50.
Memory Status (M 8-9-2)
This function helps you to check the memory used in the Contacts
List.
“Contacts” → “Manage Contacts” → “Memory Status”
Speed Dial List
You can set a maximum of 8 phone numbers in the Speed Dial list
(p. 21).
Setting Contacts List Entries in the Speed Dial List
“Contacts” → “Contacts List”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Add to Speed Dial”.
4. Select the desired location.
Sending a Contacts List Entry
“Contacts” → “Contacts List”
1. Highlight the desired entry.
2. Press [Options] and select “Send Contact”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For details on creating a message, see “Creating a New
Message” on page 50.
For details on Bluetooth wireless settings, see “Bluetooth” on
page 111.
For details on Infrared settings, see “Infrared” on page 113.
Receiving a Contacts List Entry
Tip
• The nine digit keys correspond to list numbers.
When the phone receives a Contacts List entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Contacts List. Press [No] to
reject.
To Edit the Speed Dial List (M 8-4)
“Contacts” → “Speed Dial List”
1. Highlight the entry you wish to edit.
Tip
• For details on entering Infrared or Bluetooth wireless settings, see
“Connectivity” on page 111.
2. Press [Options] and select “Re-Assign” (or “Assign”).
Contacts List
39
Sending a Voice Clip Message or Video Clip
Message Using an Address from the Contacts
List
Viewing the Log (M 8-7-2)
“Contacts” → “Synchronise”
1. Select “View Log”.
“Contacts” → “Contacts List”
1. Select the desired entry including the phone number or Email
address you wish to use.
Synchronisation Settings (M 8-7-3)
“Contacts” → “Synchronise” → “Sync Settings”
1. Select the desired account or “Create New” to enter the
following settings.
“Profile Name”:
Synchronisation profile name (Unique
name)
“Server Name”:
Server address
“User ID”:
User ID for authentication
“Password”:
Password for authentication
“Proxy”:
Selects Proxy setting for
synchronisation.
“Contacts DB Name”:
Contacts List database name on the
server
2. Highlight the desired phone number or Email address.
3. Press [Options] and select “Create Message”.
4. Select “Voice Message” or “Video Message”.
For further procedures, see “Creating a New Message” on
page 50.
Synchronising Contacts List Entries with those
on the Internet (M 8-7)
The data synchronisation function is a network service and allows you
to save your Contacts List entries in the handset memory on the
Internet server. The data in the SIM card will not be saved. Subscribe
to a synchronisation service by contacting your network service
centre.
Synchronising the Contacts List (M 8-7-1)
“Contacts” → “Synchronise”
1. Select “Sync Now!” to synchronise data.
Note
• “Sync Now!” is not available if there is no active Synchronisation
Setting.
40
Contacts List
Note
• Synchronisation settings have already been entered in your phone
depending on your service provider. You may have restrictions on
viewing, deleting, copying or modifying the settings. Contact your
service provider for details.
Camera (M 5)
Your phone has a built-in digital camera that allows you to take
pictures and record video clips wherever you are. This section starts
with basic functions and operational procedures to take, save and
send pictures and video clips, followed by common and unique
functions to camera and video modes.
Taking Pictures
“Camera”
1. Press
to take the picture.
The shutter sounds and the still image of the taken picture is
displayed.
2. Press [Save].
The taken picture is saved in My Items.
To cancel, press [Cancel].
To send the taken picture, press
in step 2 and select “As
Message” or “As Postcard” from the send option. (The Postcard
service is not available with some service providers. Contact your
service provider for more information.)
Note
• Press Y instead of
in the viewer position of the display.
• When the video camera is launched, press [Options] and select
“Go to Photo Camera”, or press c or Z (in the viewer position
of the display) to go to the photo camera mode.
• When you try to send the picture that has too large a file size, the
picture size is resized for the message. The original sized picture
is saved in My Items.
Tip
• You can activate the camera by pressing and holding Y.
Simply press Y to take pictures, and start and stop recording.
• You can lock the focus by pressing D or pressing Y halfway
before taking a picture or recording a video clip.
Taking a Self-Portrait
You can take a self-portrait while looking at the main display.
“Camera”
1. Press [Options] and select “Switch to Int. Camera”.
Or press P in the viewfinder mode.
2. Press
to take the picture.
3. Press [Save].
The taken picture is saved in My Items.
To return to the external camera, press [Options] and select
“Switch to Ext. Camera” or press P in the viewfinder mode.
To take a picture in the Self-Portrait position
You can take a self-portrait with the external camera.
1. Rotate the main display 180° clockwise from the normal
position.
2. Press Y on the side of the phone.
Note
• Do not rotate the main display anti-clockwise. Otherwise, the
phone may malfunction.
Camera
41
Exiting from the Camera Mode in the Viewer Position of the
Display
1. Press and hold Z in the viewer position.
Recording Video Clips
You can record a video clip with your phone. You can also use this
function in the viewer position of the display.
Recording Video Clips
“Camera”
The preview is displayed on the screen.
1. Press
.
Press Y in the viewer position of the display.
2. To stop recording, press
.
3. Select “Save”.
The video clip is saved in My Items.
To view the preview before saving, select “Preview”.
To send the video clip, select “Save and Send”. Then select the
desired way you wish to send. For further procedures, see
“Creating a New Message” on page 50.
Note
• You can only send video clips when “For Message” is selected for
the recording time. For details, see “Selecting the Recording Time
and Size” on page 47.
42
Camera
Using the Options Menu in the Viewer Position of
the Display
1. Press X.
The Options menu is displayed graphically.
2. Press V or W to highlight the desired option and then press
Y to make the selection.
Common Functions in the Photo and Video
Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a or b.
To Enable the Optical Zoom
The optical zoom enables you to zoom the picture more clearly by the
actual zooming action of the optical lens. The optical zoom is used up
to the [×2] zooming ratio. If the zoom exceeds [×2], the digital zoom
is used to further magnify.
“Camera” → [Options] → “Settings” → “Optical Zoom”
1. Select “Enable”.
Select “Disable” to disable.
If you select “Disable”, you can only use the digital zoom function.
2. Press a or b.
Once the phone has returned to standby, the zoom settings return to
default.
Adjusting the Exposure
“Camera” → [Options] → “Exposure”
1. Press a (Bright) or b (Dark).
: (Dark → Normal → Bright)
Once the phone has returned to standby, the brightness settings
return to default.
Mobile Light
To Change the Mobile Light Mode
Set the mobile light according to your purpose.
“Camera” → [Options] → “Modes” → “Mobile Light” →
“Switch On/Off”
1. Select the desired mode.
“On” ( ):
The light is always on.
“Automatic” ( ): The light turns on if the phone detects that
the conditions are dark.
“Low Light” ( ) (photo camera mode only):
Select this mode for macro shooting.
“Off”:
The light is always off.
The corresponding indicator is displayed on the screen. Select
“Off” to turn it off.
To Change the Light Colour
You can take a picture in various colour modes.
“Camera” → [Options] → “Modes” → “Mobile Light” →
“Light Colour”
1. Select the desired light colour.
Light Colours: White/Red/Yellow/Green/Blue/Violet/Light Blue
Using the Self-Timer
“Camera” → [Options] → “Modes” → “Self-timer”
1. Select “On” or “Off”.
“ ” is displayed on the screen when you select “On”.
Camera
43
Switching between the Photo and Video Camera Modes
You can switch between the camera and video camera modes by
pressing c or d, or Z (in the viewer position of the display).
Select the appropriate option.
“Camera” → [Options] → “Go to Video Camera”
“Camera” → [Options] → “Go to Photo Camera”
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera” → [Options] → “Picture Quality”
“Camera” → [Options] → “Video Quality”
1. Select the desired picture or video quality.
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger file size is needed.
Selecting the Storage Memory
Select the appropriate option.
“Camera” → [Options] → “Settings” → “Save New Pictures”
“Camera” → [Options] → “Settings” → “Save New Videos”
1. Select the desired location from “To Handset Memory”, “To
Memory Card” or “Choose bef. Saving”.
Note
• If you select “Choose bef. Saving”, select the desired location every
time you save.
44
Camera
Focus Setting
“Camera” → [Options] → “Modes” → “Focus”
1. Select the desired option.
: Auto Focus
: Manual Focus
: Macro
Auto Save
You can set the phone to save pictures and video clips automatically.
“Camera” → [Options] → “Settings” → “Auto Save”
1. Select “On” or “Off”.
Auto Start
You can set the phone to start the camera application automatically
by switching to the viewer position of the display.
“Camera” → [Options] → “Settings” → “Auto Start”
1. Select “On” or “Off”.
Using the Help Function
“Camera” → [Options] → “Help”
Common Shortcut Keys
If multiple options exist, they switch each time you press each
following key.
Photo Camera
Video Camera
G
Zoom Max/Min
H
Exposure
I
J
Focus
Save New Pictures to
K
L
Scene
M
Picture Quality
N
Save New Videos to
Picture Size
Microphone On/Off
Video Quality
Change Light Colour (when light is on)
P
Change External Camera/Internal Camera
R
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved in the
JPEG format.
“Camera” → [Options] → “Picture Size”
1. Select the desired size.
(External Camera) 1536 × 2048 dots/1200 × 1600 dots/
960 × 1280 dots/768 × 1024 dots/
480 × 640 dots/240 × 320 dots/
120 × 160 dots
(Internal Camera) 240 × 320 dots/120 × 160 dots
Self-timer On/Off
O
Q
Functions in the Photo Camera Mode
Switches Viewfinder
Switches Screen
Light On/Off
Note
• The “Switches Screen” option is available in “Preview” before you
save a video clip. See “Recording Video Clips” on page 42.
Camera
45
Selecting the Scene
You can select the appropriate mode by scene when you take the
picture.
“Camera” → [Options] → “Modes” → “Scene”
1. Select the desired scene.
The following eight modes are available:
“Automatic” ( ): Automatically adjusted to surroundings.
“Night” ( ):
Suited for night photography.
“Sports” ( ):
Suited for moving objects.
“Characters” ( ): Suited for high-contrast subjects such as
text.
“Pet”( ):
Suited for moving objects at short range.
“Against Sun” ( ): Suited to avoid objects being silhouetted
against the light.
“Portrait” ( ):
Suited for a portrait.
“Portrait in Dark” ( ):
Suited for a portrait indoors or in dim light.
Selecting the Picture Effects
You can take a picture with special effects.
“Camera” → [Options] → “Modes” → “Camera Effects”
1. Select the desired effects.
The following five modes are available:
“Off”:
The camera effect is cancelled.
“Sepia”:
Creates a sepia-tone image.
“Monochrome”: Creates a black and white image.
“Negative”:
Creates a negative image.
“Sketch”:
Creates a sketch-like image with contours of
objects outlined.
46
Camera
Note
• You cannot use the Camera Effects function for picture sizes larger
than 480 × 640 dots.
Continuous Shoot
There are various modes for taking continuous shots.
“Camera” → [Options] → “Modes” → “Continuous Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”:
The continuous shoots are cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select from five
types of speed or “Manual”.
“Overlapped” ( ): Overlaps continuous pictures into one
picture and makes an afterimage.
After selecting this mode, select “Fast” or
“Normal”.
“Bracket” ( ):
Takes 9 continuous pictures with various
colours and brightness levels.
After selecting this mode, select “Fast” or
“Normal”.
Note
• When you select “Manual” to take continuous pictures, press
or Y (in the viewer position of the display) manually in the
desired speed.
• When the Timer and Continuous Shoot functions are
simultaneously set, “ ” (for “4 Pictures”, for example) is
displayed instead.
• You cannot use the Continuous Shoot function for picture sizes
larger than 768 × 1024 dots. “9 Pictures”, “Overlapped” and “Very
Fast” for “4 Pictures” are not available for picture sizes larger than
480 × 640 dots.
Selecting a Frame
You can select the frame from preset patterns or My Pictures.
“Camera” → [Options] → “Modes” → “Add Frame”
1. Select “Preset Frames” or “My Pictures”.
2. Select the desired frame.
The selected frame is confirmed on the display.
.
3. Press
Note
• Images larger than 240 [W] × 320 [H] dots cannot be used.
Selecting the Shutter Sound
“Camera” → [Options] → “Settings” → “Shutter Sound”
1. Select the desired shutter sound from 3 preset patterns.
Note
• Continuous Shoot uses the specialised shutter sound that cannot
be changed from the above settings.
• The shutter sound remains active even when “General Volume”
(p. 93) is set to “Silent” to prevent unauthorised use.
Functions in the Video Camera Mode
Selecting the Recording Time and Size
“Camera” → [Options] → “Record Time/Size”
1. Select “For Message” or “Extended Video”.
“For Message”:
Limits the size to send a message
depending on service providers.
“Extended Video”:
Less than 30 minutes (depending on
the memory)
2. Select “Large(QCIF)” or “Small(SubQCIF)” picture size for “For
Message” and “QVGA(3gp)”, “QVGA(asf)”, “Large(QCIF)” or
“Small(SubQCIF)” picture size for “Extended Video”.
Using the Full Screen
You can display the preview on the full screen without the soft key
area and indicator area.
“Camera” → [Options] → “Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal Viewfinder”.
Camera
47
Note
• If you select “For Message” for the recording time, the file size is
limited depending on the service provider.
• “Save and Send” is not displayed after recording in the Extended
Video mode.
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone needs to be
activated.
“Camera” → [Options] → “Settings” → “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting. Select
“Off” to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera” → [Options] → “Settings” → “Video Encode”
1. Select the appropriate format.
48
Camera
Messaging (M 4)
Your phone allows you to send and receive text, multimedia and
Email.
1
SMS
SMS allows you to send text messages up to 765 characters long. If
you send a message of more than 160 characters, it is split into
several segments.
2
4
MMS
MMS allows you to send and receive multimedia messages of up to
300 KB with images, sound, or video clips attached.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available depending on
your network. Contact your service provider for more information.
• Maximum message size varies depending on the settings by the
service provider.
3
1.
2.
3.
4.
Recipient field
Message field
Send indicator
Attachment indicators (from left: picture, sound, video clip,
others)
Messaging
49
Creating a New Message (M 4-1)
(SMS/MMS)
A → “Create Message” → “Message”
(Email)
A → “Create Message” → “Email”
1. Select the address field.
2. Select the desired method to enter the address.
3. For MMS, enter or select the Email address or phone number
from the Contacts List. For SMS, enter or select a phone
number. For Email, enter or select an Email address.
• To add multiple Email addresses or phone numbers, highlight
the recipient field, press [Options], select “Edit Recipients”,
then select “Add Contact”. Enter or select the Email address or
phone number from the existing Contacts List.
• To change the recipient types, press [Options], select “Edit
Recipients” and highlight the desired recipient. Press [Options]
and select “Change to To”, “Change to Cc” or “Change to
Bcc”.
• To add a subject, press [Options] and select “Add Subject”.
4. Place the cursor in the message field.
5. Enter the message.
6. Highlight the “Send” indicator in the lower left of the screen.
Press
and select “Send Message”.
After the message is sent, the message is moved to the Sent box.
50
Messaging
Tip
• To send the same message to a group of recipients, select “Select
Group” in step 3, then select the desired group name. For details
on creating a mailing list, see “Creating a New Mailing List” on
page 38.
To Add a Slide Show
1. In step 5 in “Creating a New Message”, press [Options] and
select “Add Slide”.
If you wish to add more slides, select “Add Slide After” or “Add
Slide Before”.
2. Enter the message.
If you wish to set the duration of each slide, highlight the space
between the slides. Press [Options] and select “Slide Duration”,
then select the desired duration.
Tip
• You can create messages up to 300 KB. Each slide can contain
one picture and/or one sound file or video clip.
To Attach My Items Data
1. In step 5 in “Creating a New Message” on page 50, highlight
the “Picture”, “Sound” or “Video” indicator in the lower centre
of the screen, and then press
.
2. Select “Saved Pictures”, “Saved Sounds” or “Saved Videos”.
3. Select the desired file.
If you wish to take new pictures, record sounds or video clips,
select “Take Picture”, “Record Voice” or “Record Video”.
• When attaching JPEG files, select the appropriate resize
option, as the maximum message size for sending varies
depending on the service provider.
To Attach a Contacts List Entry
1. In step 5 in “Creating a New Message” on page 50, highlight
the “Others” indicator in the lower right of the screen. Press
and select “Attach Contact”.
2. Select the desired entry.
If you wish to select your own Contacts List entry, select “My
Contact Details”.
To Attach a Schedule Entry
1. In step 5 in “Creating a New Message” on page 50, highlight
the “Others” indicator in the lower right of the screen. Press
and select “Attach Appointment”.
To Remove or Replace Attachments
1. In step 5 in “Creating a New Message” on page 50, press
[Options] and select the corresponding remove option for each
attachment.
Using the Sending Options
You can use the message sending options for each type of message.
1. Highlight the “Send” indicator in the lower left of the screen,
then press
and select “Message Settings”.
• “Read Report” (“On”, “Off”) (MMS): Confirms whether or not a
report is sent notifying the sender that the message has been
read.
• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or
disables Delivery Report when the message is successfully
sent to the recipient.
• “Expiry Time” (“Maximum”, “30 minutes”, “1 hour”, “6 hours”,
“1 day”, “1 week”) (SMS/MMS): Sets Expiry Time for a
message to be saved in the server.
• “Priority” (“High”, “Normal”, “Low”): Prioritises composed
messages.
• “Delivery Time” (“No delay”, “30 minutes”, “1 hour”, “6
hours”, “1 day”, “1 week”) (SMS/MMS): Sets the amount of
time before the message is delivered.
2. Select the desired day including a schedule entry you wish to
add.
3. Select the desired schedule entry.
Messaging
51
2. Highlight the “Send” indicator in the lower left of the screen.
Press
and select “Send Message”.
After the message is sent, the message is moved to the Sent box.
Note
• The current message size displayed while you are creating the
message is an approximation.
• If a message cannot be sent for some reason, the message stays
in the Outbox and the “ ” is displayed in standby.
Tip
• To save the message without sending, press [Options] and select
“Save to Drafts” in step 5 in “Creating a New Message” on
page 50.
• You can send the following items attached to multimedia
messages. Details are given in the following sections.
• My Items data
• Contacts List entry
• File (Schedule entry created by Calendar, Contacts List entry),
etc.
• You can use the template option to help you compose messages.
For details on using this option, see “Using Templates” on
page 31.
Sending a Message in the Drafts Box (M 4-3)
A → “Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Highlight the “Send” indicator in the lower left of the screen.
Press
52
and select “Send Message”.
Messaging
Sending a Voice Clip Message or Video Clip
Message (M 4-1-2) (M 4-1-3)
You can record a new voice or video clip when creating a new
message.
Select the appropriate option.
A → “Create Message” → “Voice Message”
A → “Create Message” → “Video Message”
1. Press
to start recording.
2. Press
to stop recording.
3. Select “Accept” to attach to the new message.
The file is saved in the corresponding folder in My Items.
For further procedures, see “Creating a New Message” on
page 50.
Reading Messages
Messages you receive are saved in the Inbox.
A → “Inbox”
1. Select the message you wish to view.
Downloading a Single MMS
A → “Inbox”
1. Highlight the message alert (
Storing the Phone Number of a Sender in the Contacts List
A → “Inbox”
1. Highlight the message from which you wish to store the phone
number or Email address.
Tip
• You can download multiple messages at the same time. See
“Downloading Multiple MMS”.
2. Press [Options] and select “Save Address”.
The new Contacts List entry screen including the phone number
is displayed. For details on creating a new Contacts List entry,
see “Add New Contact” on page 35.
Calling the Phone Number of a Sender Embedded in the
Message
A → “Inbox”
1. Highlight the message including the phone number you wish
to dial.
) you wish to download.
2. Press [Options] and select “Download”.
Downloading Multiple MMS
A → “Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alert, press [Options] and select
“Select” or “Select All”.
4. Press [Options] and select “Download”.
The selected messages are downloaded at the same time.
2. Press [Options] and select “Call Sender”.
Messaging
53
Replying to a Message or to All Addresses
A → “Inbox”
1. Highlight the message the sender of which you wish to reply
to.
2.
3.
4.
5.
Press [Options] and select “Reply” or “Reply All”.
Select “Reply” or “Reply with History”.
Enter the message.
Highlight the “Send” indicator in the lower left of the screen.
Press
and select “Send Message”.
Forwarding a Message
A → “Inbox”
1. Highlight the message you wish to forward.
2. Press [Options] and select “Forward”.
3. Perform steps 1 to 6 in “Creating a New Message” on
page 50.
Sorting the Messages in the List
A → “Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Sort”.
3. Select the desired sort type.
54
Messaging
Locking or Unlocking the Messages
A → “Inbox”
1. Highlight the message you wish to lock or unlock.
2. Press [Options] and select “Advanced”.
3. Select “Lock” or “Unlock”.
Sending a Picture File with Postcard (M 4-1-4)
Your phone allows you to send multimedia messages to a Vodafone
specific Postcard service centre that prints the picture and mails it to
the recipient’s home address specified in the MMS message. (Your
phone is initially provided with the address of a Vodafone specific
Postcard service centre, and its address cannot be changed.)
Note
• This service is not available with some service providers. Please
contact your service provider for more information.
To Create a New Postcard
See the note on page 133 for menu indications.
A→ “Create Message” → “Postcard” → “Saved Pictures”
1. Select a picture you wish to send.
If you wish to take new pictures, select “Take Picture”.
If the file size of selected JPEG format pictures or taken pictures
is too large to send, resize the picture and try again.
2. Enter your message.
You can enter messages of up to 200 bytes.
3. Enter or select the recipient.
See the note below for details.
• “Name” (mandatory):
Name of the recipient for a postcard up to 50 bytes
• “Additional Information” (optional):
Additional information of the recipient up to 50 bytes
• “Street & Number” (mandatory):
Street and number up to 50 bytes
• “City” (mandatory):
City up to 50 bytes
• “Postal Code” (optional):
Postal code up to 20 bytes
• “State/Province” (optional):
State, province, and region up to 50 bytes
• “Country” (optional):
Country up to 20 bytes
4. Press [Options] and select “Send Postcard”.
Note
• The items “Name”, “Street & Number” and “City” are necessary to
complete sending Postcards.
• The items displayed differ according to the service. Please contact
your service provider for more information. The item “Country” may
not be displayed, so you cannot send Postcards overseas from
your phone.
• Asterisks entered in the message or the address become invalid
when the message is sent, and spaces cannot be entered in the
Postal Code.
• Files in Animation GIF format cannot be used for the Postcard
service.
• The picture quality of Postcards varies depending on the picture
size.
Messaging
55
Messaging Settings (M 4-9)
General Settings (M 4-9-1)
A → “Messaging Settings” → “General Settings”
1. Select the item you wish to set up.
• “Home Download”:
Controls message download timing inside your network area.
“Always Download”:
Downloads messages immediately
from the server.
“Always Defer”:
Defers message download.
• “Roaming Download”:
Controls message download timing when roaming outside of
your network.
“Always Download”:
Downloads messages immediately
from the server.
“Always Defer”:
Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Read Report”:
Enables or disables Read Report request.
56
Messaging
• “Expiry Time”:
This indicates the number of days and hours for which a
message you send may remain undelivered to the message
recipient. During this period, the message service centre will
continually try to deliver the message to the recipient.
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying the sender
when you receive an MMS/SMS.
• “Read Report Allow”:
Enables or disables Read Report Allow when the recipient is
required to inform the sender that the message has been
read.
• “Edit Signature”:
Opens the screen to enter the signature.
• “Auto Delete”:
Deletes the oldest message automatically when the Inbox,
Sent or both (Inbox and Sent) is full.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up to two times
(“On” or “Off” selection).
• “Message List View”:
Switches the mailbox listing between “One-line View” and
“Two-line View”.
SMS Settings (M 4-9-2)
A → “Messaging Settings” → “SMS Settings”
1. Select the item you wish to set up.
• “Message Centre”:
Enter the message centre number.
If you wish to enter a country code for a message to an
international number, press and hold Q until a + sign is
displayed.
• “Message Format”:
Select the message format to be used when creating a new
message.
• “Reply Path”:
Accepts or rejects the same reply path with the send path
when receiving the reply message for your message.
• “Optimisation”:
When set “On” (default), double-byte characters such as
European characters with an accent are converted into
single-byte characters and sent.
When “Off”, double-byte characters are sent as displayed.
Please note that you may be charged double for double-byte
characters sent in an SMS when Optimisation is set “Off”.
MMS Settings (M 4-9-3)
A → “Messaging Settings” → “MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to enter the
following settings.
“Profile Name”:
MMS profile name (Unique name)
“Proxy”:
Proxy setting for MMS
“Relay Server URL”:
MMS relay server
• “Slide Duration”:
Sets the duration of the slide.
• “Max Message Size”:
Sets the maximum message size for sending and disables
sending MMS messages exceeding that size.
• “Creation Mode”:
When set to “Free”, you can attach files of any format to the
mail. When set to “Restricted”, only certain formats and
message sizes can be attached. The “Restricted” setting has
priority over “Max Message Size”.
Messaging
57
Email Settings (M 4-9-4)
A → “Messaging Settings” → “Email Settings”
1. Select the item you wish to set up.
• “Email Accounts”:
Select the desired account or select “Create New” to enter the
following settings.
“Account Name”:
Email account name (Unique
name)
“POP3 Server”:
Server name, user ID, password
and port number for POP3 server
“SMTP Server”:
Server name, user ID, password,
port number for SMTP server and
SMTP Authentication
“Access Point”:
Access point for Email
“Email Address”:
Email address
• “Download Interval”:
Sets the download interval.
• “Max Message Size”:
Sets the maximum message size for sending and disables
sending Email messages exceeding that size.
58
Messaging
Cell Broadcasts (M 4-9-5)
You can receive cell broadcast messages or general messages such
as weather forecasts and traffic reports. This information is broadcast
to subscribers in certain network areas.
This function may not be available on all mobile phone networks.
Contact your service provider for more information.
To Enable/Disable Cell Broadcasts
A → “Messaging Settings” → “Cell Broadcasts” →
“Switch On/Off”
1. Select “On” or “Off”.
To Read Cell Broadcast Messages
A → “Messaging Settings” → “Cell Broadcasts” → “Read
Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Press [Back].
To Set Languages for Cell Broadcast Messages
A → “Messaging Settings” → “Cell Broadcasts” →
“Settings” → “Language”
The current language is displayed.
1. Press
.
Area Info (M 4-9-6)
The Area Info is the message information that operators send to
subscribers in certain areas.
When you receive Area Info, the message (area code) is displayed in
standby.
2. Press
to check.
3. Press [Save].
To Enable/Disable Area Info
A → “Messaging Settings” → “Area Info”
1. Select “On” or “Off”.
To Subscribe to Cell Broadcasts
Select the page of the cell broadcast message that you want.
A → “Messaging Settings” → “Cell Broadcasts” →
“Settings” → “Set Info Subjects” → [Options]
1. Select “Add/Remove”.
Note
• This function may not be available on all mobile phone networks.
Contact your service provider for more information.
• If Area Info is set to “On”, the standby time will decrease.
2. Select the desired page.
3. Press [Back].
Tip
• If the desired page is not in the list that appears in step 2, select
“Create Subject” in step 1, then enter the subject code to add a
page. For details on the subject code, contact your service
provider.
Messaging
59
Vodafone live! (M 2)
Your phone is already configured to access Vodafone live! and the
mobile internet*.
Vodafone live! is a new mobile internet portal which is your gateway
to a new world of information, games, music and services.
Because your phone uses 3G (UMTS), it has a system that is much
faster than previous ways of getting mobile information. Also, the
connection is ‘always on’ which means there is no need to wait for
dialling up. You only have to pay for the data you send or receive, not
how long you’re connected.
* If you have problems getting connected, please phone Vodafone
Customer Support.
Your phone contains a WAP browser used for surfing on the Mobile
Internet, where you can get a lot of useful information. Normally,
pages are designed for a mobile phone.
60
Vodafone live!
Main Menu
“Vodafone live!” → “Vodafone live!”
The Vodafone live! service page is displayed.
“Vodafone live!” → “Enter URL”
The URL entry screen is displayed, allowing you to jump to a site.
“Vodafone live!” → “Bookmarks”
See page 61.
“Vodafone live!” → “Alert Inbox”
WAP Push alerts are displayed.
“Vodafone live!” → “My Saved Page”
The saved screenshots are displayed.
“Vodafone live!” → “Access History”
The history of pages you have recently browsed is displayed.
“Vodafone live!” → “Browser Settings”
See page 61.
Navigating a WAP Page
• a b c d:
Move the highlights around in the screen.
•
:
Executes the option displayed in the lower centre of
the screen.
• A:
Launches the browser option menu.
• C:
Selects an action displayed in the lower right of the
screen.
Used to access “Vodafone live!” by opening the
browser.
• F (short press):
Exits the browser.
(press and hold):
Turns off the phone.
Editing Bookmarks (M 2-3)
“Vodafone live!” → “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
“Open”:
Selects a bookmark.
“Details”:
Displays detailed information of the
WAP page.
“Send Page”:
Sends the URL address to recipients.
“New”:
Creates new folders or bookmarks.
“Rename”:
Renames bookmarks.
“Edit URL”:
“Move”:
“Delete”:
“Delete All”:
Edits URL address of the bookmark.
Moves bookmarks to another location.
Deletes a bookmark.
Deletes all bookmarks.
Browser Settings (M 2-7)
“Vodafone live!” → “Browser Settings”
“Font Size”:
Sets the size of the browsing font.
“Scroll Step”:
Sets the speed of scrolling.
“Send Referrer”:
Enables or disables the notification of
the referrer.
“Cookies”:
Adjusts the setting of cookies.
“Downloads”:
Disables downloading data from the
images/sounds/objects.
“Security”:
Adjusts the security prompt level.
“WAP Push”:
Sets whether you need confirmation
for push message.
“Download to”:
Sets the download location.
Vodafone live!
61
The Browser Options
You can use various options of the WAP browser.
C → [Options]
“Select”:
Selects a WAP page.
“Home”:
Goes to the homepage.
“Bookmarks”:
See page 61.
“Mark Page”:
Marks the selected WAP page.
“Save This Link”:
Downloads the linked WAP page data.
“Save Items”:
Saves items from WAP pages.
“Enter URL”:
Goes to the WAP page that you enter
the URL address of.
“Access History”:
Shows the history where you have
browsed.
“Forward”:
Goes to the next page of the pages
displayed.
“Reload Page”:
Reloads the WAP page again to get
new information.
“Advanced”:
Displays the advanced menus.
“Exit”:
Exits the browser.
62
Vodafone live!
The Advanced Options
C → [Options] → “Advanced”
“My Saved Page”:
The saved screenshots are displayed.
“Save This Page”:
Saves the WAP page as the local file.
“Send Page”:
Sends the URL address and title to
recipients.
“Details”:
Shows detailed information of the WAP
page.
“Browser Data”:
Edits the browser data. You can clear
the cache/cookies/history.
“Search This Page”:
Searches specific words in the WAP
page.
“Copy Text”:
Copies the text on the web page.
“Browser Settings”:
Displays the Settings menus.
“Restart Browser”:
Restarts the browser.
“About”:
Displays the browser information.
Music (M 3)
Music Player
You can play back MP3, AAC and AAC+ format sound files with Music
Player. While playing back sound files in the background, you can use
other menus.
Playing Back Sound Files
“Music” → “My Music”
1. Select “All Music” or the desired playlist.
2. Select the desired file.
To pause playback, press
.
To stop playback, press [Back].
Note
• You are asked whether or not to play sounds when the Silent mode
is activated.
• To play the last played file, select “Last Played Music”. “Currently
Playing” is displayed when the file is being played back.
Tip
• You can return to the Main menu screen while playing back the file
in the background.
• You can create your playlist by listing only the desired files (p. 64).
• You can make tone adjustment in step 2. Press [Options] and
select “Tone Control”. Select “Normal”, “Bass”, “Surround” or
“Surround Bass”.
• You can select the playback pattern in step 2. Press [Options] and
select “Playback Pattern”.
“Normal”:
Plays back all files in the selected folder once
and stops playback.
“Repeat”:
Continues playback in the selected folder.
“Repeat All”:
Plays back all files in the selected folder.
“Random”:
Plays back files in the selected folder at
random.
• You can control the Music Player by using the following keys:
a/ b : Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
F: Plays back the file in the background.
Music
63
Searching a File to Be Played Back
“Music” → “My Music”
1. Select “All Music” or the desired playlist.
Adding a New Playlist
“Music” → “My Music”
1. Press [Options] and select “Add New Playlist”.
2. Press [Options] and select “Search”.
3. Enter the first few letters of the title.
2. Enter the desired playlist name.
3. Press
.
Search results are displayed in alphabetical order and the
matching file is highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Music” → “My Music” → “All Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist, see
“Adding a New Playlist”.
3. Select the desired folder.
The file highlighted in step 1 is saved.
To delete files from the playlist, highlight the file and press
[Options]. Then select “Delete from Playlist”.
64
Music
Note
• To delete the playlist, highlight the playlist and press [Options].
Then select “Delete Playlist”.
Downloading the Music Files (M 3-3)
“Music” → “Browse Music Store”
The music file download site is displayed.
Note
• This service is not available with some service providers. Please
contact your service provider for more information.
My Items (M 6)
My Items contains several types of picture, sound and video clip data.
Also included in My Items are frequently used text message phrases
and WAP sites which you can use for downloading. You can also
transmit picture, sound and video clip data via infrared or Bluetooth
wireless technology to OBEX-enabled phones.
Pictures (M 6-1)
Pictures that are taken by a digital camera or images that are
downloaded from mobile Internet sites can be managed. You can
register pictures in the following formats: JPEG, PNG, WBMP and GIF.
Viewing Pictures
“My Items” → “Pictures”
1. Press d to display the list from the memory card and c to
return to the handset memory.
2. Select the file you wish to view.
The selected picture is displayed.
Using Images as Wallpaper
“My Items” → “Pictures”
1. Highlight the file you wish to use as wallpaper.
Saving an Image to Contacts List Entries
You can use this option only for pictures saved in the handset
memory.
“My Items” → “Pictures”
1. Highlight the file you wish to add to Contacts List.
2. Press [Options] and select “Add to Contact”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Add New Contact” on page
35.
Editing Pictures
“My Items” → “Pictures”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Picture Editor”.
3. Select the desired option.
Note
• “Picture Editor” may not be available depending on the original
picture and copyright issued.
2. Press [Options] and select “Set as Wallpaper”.
My Items
65
Adjusting the Size
You can adjust the picture to an appropriate size depending on the
scene.
“My Items” → “Pictures”
1. Highlight the file you wish to adjust the size of.
2. Press [Options] and select “Resize”.
3. Select the desired option.
Note
• “Resize” may not be available depending on the original picture
and copyright issued.
Tip
• For other option menus, see “Common Option Menus” on
page 68.
Downloading Picture Files
“My Items” → “Pictures” → “Get new”
The picture file download site is displayed.
Sounds & Ringtones (M 6-2)
The downloaded sound files and the AMR data recorded by Voice
Recorder are managed in Sounds & Ringtones. The default ringtones
are not contained within Sounds & Ringtones. Only the sound files
that can be played back on the phone are stored in Sounds &
Ringtones.
66
My Items
Playing Back Sound Files
“My Items” → “Sounds & Ringtones”
1. Press d to display the list from the memory card and c to
return to the handset memory.
2. Select the file you wish to play back.
To stop playback, press
.
Note
• Playback may not be available for some sound files.
Using the Sound Files as a Ringtone
“My Items” → “Sounds & Ringtones”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Note
• AMR format music files cannot be used for ringtones.
Tip
• For other option menus, see “Common Option Menus” on
page 68.
Downloading Sound Files
“My Items” → “Sounds & Ringtones” → “Get new”
The sound file download site is displayed.
Videos (M 6-4)
Video clips that are recorded by a video camera or downloaded from
mobile Internet sites can be managed.
Playing Back Video Clip Files
“My Items” → “Videos”
1. Press d to display the list from the memory card and c to
return to the handset memory.
2. Select the file you wish to play back.
3. Press
.
To pause playback, press
.
To resume, press
again.
To stop playback, press [Back].
Using a Video Clip as a Ring Video
You can set your video clip to play back when the phone rings.
“My Items” → “Videos”
1. Highlight the desired video clip.
Downloading Video Clip Files
“My Items” → “Videos” → “Get new”
The video clip file download site is displayed.
Other Documents (M 6-6)
Some types of files are stored in the Other Documents folder of the
phone. You can edit and use these files as My Items data.
Opening the Document File
“My Items” → “Other Documents”
1. Press d to display the list from the memory card and c to
return to the handset memory.
2. Select the desired file.
Tip
• For other option menus, see “Common Option Menus” on
page 68.
2. Press [Options] and select “Set as Ring Video”.
Tip
• For other option menus, see “Common Option Menus” on
page 68.
My Items
67
Common Option Menus
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, and video clips have a digital copy
protection program, which is called DRM (Digital Rights
Management). You need to activate the digital licence permission to
open the files. Files protected with DRM are displayed with
.
Select the appropriate option.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
1. Highlight the file you wish to activate.
2. Press [Options] and select “Activate”.
Note
• Some pictures with DRM may not open even when an attempt is
made to activate it.
Sending My Items Data
Select the appropriate option.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
68
My Items
1. Highlight the desired file.
2. Press [Options] and select “Send”.
3. Select “As Message”, “As Postcard”, “Via Bluetooth” or “Via
Infrared”.
For details on creating a message, see “Creating a New
Message” on page 50.
For details on Bluetooth wireless settings, see “Bluetooth” on
page 111.
For details on Infrared settings, see “Infrared” on page 113.
Note
• Pictures/Sounds/Video clips protected by copyright cannot be sent
attached to a message, with the exception of Separate Delivery
files.
• When pairing, you need to enter your passcode when establishing
contact with a Bluetooth wireless technology enabled device for the
first time.
• When you send a picture file, select “As Postcard” in step 3. The
Postcard service is not available with some providers. Contact your
service provider for more information.
Receiving My Items Data
When the phone receives My Items data, a confirmation message is
displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding My Items folder.
Tip
• For details on Infrared or Bluetooth wireless settings, see
“Connectivity” on page 111.
Using My Items Data
You can copy, move, sort, rename, and delete the saved My Items
data.
Select the appropriate option.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
1. Highlight the desired file.
To Rename the File
Select the appropriate option.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
2. Press [Options] and select “Advanced”.
3. Select the desired option.
“Move”:
“Copy”:
“Create Folder”:
“Multiple Select”:
“Sort”:
Moves files to another folder. Select the
desired folder to move to.
Copies files. Select the desired folder to
copy to.
Creates a new folder.
Selects multiple files.
Sorts the file. Select the desired files to sort.
My Items
69
To See the My Items Details
Select the appropriate option.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
“My Items” → “Other Documents”
1. Highlight the file you wish to view the details of.
2. Press [Options] and select “Details”.
Uploading My Items Data
You can upload your picture, sound or video clip files to the Media
Album.
“My Items” → “Pictures”
“My Items” → “Sounds & Ringtones”
“My Items” → “Videos”
1. Highlight the file you wish to upload.
2. Press [Options] and select “Send”.
3. Select “To Media Album”.
Note
• This service is not available with some service providers. Please
contact your service provider for more information.
• Picture, sound and video clip files protected with a copyright
cannot be uploaded, with the exception of Separate Delivery files.
Selecting Multiple Files
You can select more than one item from My Items for moving, copying
and deleting.
70
My Items
Note
• The following procedure applies when the entries other than “Get
new” are highlighted.
Select the appropriate option.
“My Items” → “Pictures” → [Options]
“My Items” → “Sounds & Ringtones” → [Options]
“My Items” → “Videos” → [Options]
“My Items” → “Other Documents” → [Options]
1. Select “Advanced”.
2. Select “Multiple Select”.
3. Press
to check the desired file names.
4. Press [Options] and select the desired option.
Tip
• To remove the check, select the file again or select “Unselect” in
step 4.
• If you wish to select all files, select “Select All” in step 4. To
unselect all, select “Unselect All”.
Games & Applications (M 6-3)
Memory Status (M 6-7)
For details on Vodafone specific applications, see “Games &
Applications” on page 72.
This function helps you to check the memory status of the handset
memory or memory card. Memory status covers the following.
Handset Memory:
Applications, Pictures, Videos, Sounds,
Others, Total and Free
Memory Card:
Pictures, Videos, Sounds, Others, Total and
Free
“My Items” → “Memory Status”
1. Select “Handset Memory” or “Memory Card”.
Text Templates (M 6-5)
You can register up to 50 text templates for use in text messages and
multimedia messages. A maximum of 256 characters can be used
for a single text template.
Adding Phrases to Text Templates
“My Items” → “Text Templates” → “Add New Template”
1. Enter the text and press
.
Editing Text Templates
“My Items” → “Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press [Options] and select “View”.
To delete the text template, press [Options] and select “Delete”.
3. Modify the text and press
.
Sending Text Templates
“My Items” → “Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
My Items
71
Entertainment (M 1)
Games & Applications (M 1-1)
Using Applications (M 1-1-1)
Various kinds of Vodafone specific applications can be used on this
phone. To use applications, download the applications via the mobile
Internet. Some applications offer the ability to connect to a network
either within a game or a network based application.
Note
• Applications may be both localised (no connectivity) and network
based (using the mobile Internet to update information/play
games). The network may charge you more for using networkbased applications. Please contact your service provider for more
information.
Downloading Applications
“Entertainment” → “Games & Applications” →
“Games & Applications” → “More Games”
1. Select the desired application.
Before downloading the application you are asked to confirm
what you are about to receive. After checking the information on
the confirmation screen, the application can be downloaded.
2. Press
to start downloading.
3. Press
72
when finished.
Entertainment
Note
• User authentication may be required before downloading the
application on some information screens.
Executing Applications
“Entertainment” → “Games & Applications” → “Games &
Applications”
1. Select the title of the application you wish to execute.
The selected application is executed. When using network
connection type applications, connection to the network can be
selected.
2. To end the application, press F and select “End”.
Setting as a Screensaver for the Main Display
“Entertainment” → “Games & Applications” → “Games &
Applications”
1. Highlight the file you wish to use as a screensaver.
2. Press [Options] and select “Set as Screensaver”.
Setting Permission
You can set permission for selected Java™ applications.
“Entertainment” → “Games & Applications” →
“Games & Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Permission”.
3. Select one of the following options:
“Phone Call”:
“Network Access”:
“Messaging”:
“Autorun”:
“Local Connection”:
“Read User Data”:
“Write User Data”:
“Use Multimedia”:
“Location Access”:
Sets permission to make voice calls.
Sets permission to access the network.
Sets permission to perform MMS and
SMS messaging.
Sets permission to perform the Autorun
function.
Sets permission to connect to local
devices.
Sets permission to read user data, such
as Contacts List entries, mailbox (Inbox)
and My Items data.
Sets permission to write entries in your
phone, such as Contacts List entries,
mailbox (Inbox) and My Items data.
Sets permission to use the multimedia
recording.
Sets permission to update the
positioning function.
4. Select one of the following options:
“Session”:
“Ask Once”:
“Blanket”:
“No”:
The confirmation message is not
displayed until you exit the application,
while execution of the API of the
specified function group is authorised.
The confirmation message is displayed
every time the API of the specified
function group is executed.
The confirmation message is not
displayed until the application is deleted
or you change the settings, while
execution of the API of the specified
function group is authorised.
Execution of the API of the specified
function group is not authorised.
Note
• To clear all the permission settings, select “Reset” in step 3.
• All permissions are not available for all Java™ applications.
Entertainment
73
Viewing Application Information
You can check the information of Java™ applications.
“Entertainment” → “Games & Applications” → “Games &
Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application from the handset memory.
“Entertainment” → “Games & Applications” → “Games &
Applications”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Settings (M 1-1-2)
Application Volume
You can set the volume of the application such as the sound effect to
one of the five levels or silent. When the profile is set to “Silent”, the
“General Volume” setting (p. 93) has priority.
“Entertainment” → “Games & Applications” → “Settings” →
“Application Volume”
1. Press a (or d) to increase the volume or press b (or c) to
decrease the volume and then press
.
74
Entertainment
Backlight
“Entertainment” → “Games & Applications” → “Settings” →
“Backlight” → “Switch On/Off”
1. Select “Always On”, “Always Off” or “Normal Settings”.
“Always On”:
Lit while the application is operated.
“Always Off”:
Unlit while the application is operated even
if a key is pressed.
“Normal Settings”: Works with the main backlight setting
(p. 99).
To Set the Blinking Operation
This setting enables the backlight to be controlled by the application.
If set to “Off”, the backlight cannot be turned on from the application.
“Entertainment” → “Games & Applications” → “Settings” →
“Backlight” → “Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can choose whether
the operation is enabled or disabled.
“Entertainment” → “Games & Applications” → “Settings” →
“Vibration”
1. Select “On” or “Off”.
Calls & Alarms
You can set the priority of incoming calls and alarms while an
application is operating.
“Entertainment” → “Games & Applications” → “Settings” →
“Calls & Alarms”
1. Select “Voice Call”, “Video Call”, “Incoming Message” or
“Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm Priority”:
The application is suspended automatically, and you can receive a
call or a message, or the alarm will sound. After finishing the call
or the message, or the alarm ends, the suspend indicator ( ) is
displayed letting you know there is a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the first line of the
screen while the application continues. If you press D, the
application is suspended, and you can receive a call or a message.
After finishing the call or the message, the suspend indicator ( )
is displayed letting you know there is a suspended application.
Screensavers
You can download screensaver applications for the standby screen
and set the time period for the screensaver to activate.
“Entertainment” → “Games & Applications” → “Settings” →
“Screensavers” → “Switch On/Off”
1. Select “On” or “Off”.
For further procedures, see “Setting as a Screensaver for the
Main Display” on page 72.
To Set the Activation Time
“Entertainment” → “Games & Applications” → “Settings” →
“Screensavers” → “Activation Time”
1. Enter the activation time in two digits using the keypad.
To Set the Suspend Time
“Entertainment” → “Games & Applications” → “Settings” →
“Screensavers” → “Suspend Time”
1. Set the desired time period from “after 15 min.” to “after 6
hours”.
Entertainment
75
Setting the Surround Sound
“Entertainment” → “Games & Applications” → “Settings” →
“Surround”
1. Select “On” or “Off”.
Default Settings
All the settings for “Games & Applications” can be reset.
“Entertainment” → “Games & Applications” → “Settings” →
“Set to Default”
1. Enter your handset code.
Clearing All Memory
The Java™ applications in the handset memory can be reset.
“Entertainment” → “Games & Applications” → “Settings” →
“Memory All Clear”
1. Enter your handset code.
Java™ Information (M 1-1-3)
“Entertainment” → “Games & Applications” → “Java™
Information”
The information about the licences belonging to Java™ is displayed.
TV & Video (M 1-2)
Playing Back Video Clip Files (M 1-2-4)
“Entertainment” → “TV & Video” → “My Videos”
1. Select “Handset Memory” or “Memory Card”.
76
Entertainment
2. Select the desired file.
To pause playback, press
.
To stop playback, press [Back].
Tip
• You can control the Video Player by using the following keys:
a/b: Increases or decreases the volume.
b (press and hold): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (press and hold): Fast-forwards.
c (press and hold): Rewinds.
Searching a File to Be Played Back
“Entertainment” → “TV & Video” → “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Press [Options] and select “Search”.
4. Enter the first few letters of the title.
Search results are displayed in alphabetical order and the
matching file is highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Entertainment” → “TV & Video” → “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Highlight the file you wish to add to the playlist.
4. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a playlist, see
“Adding a New Playlist”.
5. Select the desired folder.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the file and press
[Options]. Then select “Delete from Playlist”.
Editing the Video Clip File
“Entertainment” → “TV & Video” → “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2.
3.
4.
5.
Select “All Videos” or the desired playlist.
Select the file you wish to edit.
Press [Options] and select “Edit”.
Select the desired option.
“Crop”:
Selects the desired area to be cropped.
“Subtitle”:
Creates a subtitle to add to the file.
Adding a New Playlist
“Entertainment” → “TV & Video” → “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2. Press [Options] and select “Add New Playlist”.
3. Enter the desired playlist name.
4. Press
.
Note
• To delete the playlist, highlight the playlist and press [Options].
Then select “Delete Playlist”.
Entertainment
77
Settings
You can select a play mode for “Playback Pattern”, “Backlight” and
“Display Size” when playing back video clip files.
“Entertainment” → “TV & Video” → “My Videos”
1. Select “Handset Memory” or “Memory Card”.
2.
3.
4.
5.
6.
78
Select “All Videos” or the desired playlist.
Select the file for which you wish to adjust the play mode.
Press [Options] and select “Settings”.
Select “Playback Pattern”, “Backlight” or “Display Size”.
Select from the following:
• “Playback Pattern”
“Normal”:
Plays back all files in the selected folder
once and stops playback.
“Repeat”:
Continues playback in the selected
folder.
“Repeat All”:
Plays back all files in the selected folder.
“Random”:
Plays back files in the selected folder at
random.
• “Backlight”
“Always On”:
Lit while the file is played back.
“Always Off”:
Unlit while the file is played back even if
a key is pressed.
“Normal Settings”: Works with the main backlight setting
(p. 99).
• “Display Size”
“Original Size”:
Displays the file in its original size.
“Enlarge”:
Displays the file in an enlarged size.
“Full Screen”:
Displays the file on the full screen.
Entertainment
SD VIDEO (M 1-2-5)
Video clips that are recorded by a video camera or downloaded from
mobile Internet sites can also be managed with SD VIDEO.
“Entertainment” → “TV & Video” → “SD VIDEO”
1. Select the desired file.
To pause playback, press
.
To stop playback, press C.
To delete files from the playlist, highlight the playlist, press
[Options] and select “Delete”.
Downloading Video Clip Files (M 1-2-3)
“Entertainment” → “TV & Video” → “Get New Videos”
The video clip file download site is displayed.
Playing Back the Video Clip Files
To Play Back the Last File (M 1-2-1)
“Entertainment” → “TV & Video” → “Last Played Video”
Streaming (M 1-2-2)
You can play back video clip files while downloading them from the
mobile network.
You can also register the address of the Web site as a bookmark.
“Entertainment” → “TV & Video” → “Streaming”
1. Select “Last Played Streaming”, “Enter URL”, “Favourites”,
“Access Log” or “Display Size”.
“Last Played Streaming”:
Shows the last streaming file.
“Enter URL”:
Enter the desired address of the Web site. The
browser opens, starts downloading and plays
back.
“Favourites”:
The address of the Web site is registered.
“Access Log”:
Shows the logs of the Web site you accessed.
From the log you can start streaming.
“Display Size”:
Select “Original Size”, “Enlarge” or “Full
Screen”.
Entertainment
79
Organiser & Tools (M 7)
Calendar (M 7-1)
Calendar allows you to easily schedule appointments or events at any
given date or time.
These entries can also be sent via Infrared or Bluetooth wireless
technology to a PC to share the same schedules. When you exchange
entries with other devices, the date and time displayed may be
different to that of the original data depending on the data format of
the receiving device.
Creating a New Entry
“Organiser & Tools” → “Calendar”
1. Select the desired day to which you want to add an event.
2.
3.
4.
5.
6.
7.
Select “Add New Entry”.
Enter the subject.
Enter the location.
Select the desired category.
Enter the start date and then enter the start time.
Select the duration.
When selecting “Other”, enter the desired end date and time.
8. Select the reminder time.
When selecting “Other”, enter the desired reminder date and
time.
9. Press [Save].
80
Organiser & Tools
Note
• If the date and time settings have not been entered, the date and
time entry screen is displayed (p. 100).
• The reminder will not sound when “General Volume” (p. 93) is set
to “Silent”.
To Change the Type of the Reminder Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset Sounds” or “My
Sounds”, or select “Assign Video”.
4. Select the desired sound or video clip file.
For details on selecting a tone, see “Assigning a Ringtone” on
page 94.
To Change the Duration of the Reminder Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the time period.
When you select “Other”, you can enter the desired time in two
digits using the keypad.
To Change the Repeat Option of the Reminder
1. On the New Entry screen, select “Repeat”.
2. Select the desired repeat option.
To Enter the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the schedule entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to leave it
as it is.
Viewing a Schedule Entry
“Organiser & Tools” → “Calendar”
1. Select the day you wish to view.
Tip
• In the monthly or weekly view, you can control the view by using
the following:
Monthly view
P:
Displays the previous month.
R:
Displays the next month.
Q:
Displays the weekly view.
K:
Moves the cursor to today.
c/ d :
Moves the cursor to left (the previous day) or to right
(the next day).
a/ b :
Moves the cursor upward (last week) or downward
(next week).
Weekly view
P:
Displays the previous week.
R:
Displays the next week.
Q:
Displays the monthly view.
K:
Moves the cursor to today.
c/ d :
Moves the cursor to left (the previous day) or to right
(the next day).
a/ b :
Moves the weekly view up or down (the previous hour
or next hour).
To Search By Date
1. In any view, press [Options] and select “Go to”.
2. Select “Today” to display today or “Enter Date” to enter the
desired date.
Organiser & Tools
81
Editing a Schedule Entry
“Organiser & Tools” → “Calendar”
1. Select the day and the desired entry you wish to edit.
2. Press [Options] and select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”:
Deletes all entries for the selected day.
“All This Week” (weekly view):
Deletes all entries for the selected week.
“Up to Last Week” (weekly view):
Deletes all entries before this week.
“All This Month” (monthly view):
Deletes all entries for the selected month.
“Up to Last Month” (monthly view):
Deletes all entries before this month.
“All Appointments” (weekly and monthly view):
Deletes all entries in this application.
82
Organiser & Tools
Sending a Schedule Entry
“Organiser & Tools” → “Calendar”
1. Select the day and the desired entry including schedule entries
you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For details on creating a message, see “Creating a New
Message” on page 50.
For details on Bluetooth wireless settings, see “Bluetooth” on
page 111.
For details on Infrared settings, see “Infrared” on page 113.
Note
• When pairing, you need to enter your passcode when establishing
contact with a Bluetooth wireless technology enabled device for the
first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a confirmation message
is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on entering Infrared or Bluetooth wireless settings, see
“Connectivity” on page 111.
Viewing the Memory Status
To Change the Type of Alarm Tone or Video Clip File
1. In any view, press [Options] and select “Memory Status”.
1. On the Set Alarm screen, select “Assign Tone/Video”.
2. Select “Assign Tone” and then select “Preset Sounds” or “My
Alarms (M 7-2)
Sounds”, or select “Assign Video”.
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before setting the
alarm function if it has not been done already.
“Organiser & Tools” → “Alarms”
1. Select the blank setting.
2. Enter the desired time.
3. Press [Save].
To Change the Type of Repeat Options
1. On the Set Alarm screen, select “Repeat”.
2. Select “Once Only”, “Every Day” or “Selected Days”.
“Once Only”:
“Every Day”:
“Selected Days”:
The alarm sounds once only.
The alarm sounds every day at the specified
time.
The alarm sounds on the selected day of the
week at the specified time.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone” on
page 94.
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b (or c) to
decrease the volume.
Note
• The alarm will not sound when “Alarm Volume” is set to “Silent”.
When the profile is set to “Silent”, the “General Volume” setting
(p. 93) has priority.
Organiser & Tools
83
To Change the Vibration of Alarm Tone
1. On the Set Alarm screen, select “Vibration”.
2. Select “On”, “Link to Sound” or “Off”.
For details on selecting a vibration, see “Vibration” on page 96.
To Change the Duration of the Alarm Tone
1. On the Set Alarm screen, select “Duration”.
Calculator (M 7-3)
The calculator function performs the 4 arithmetic calculations using
up to 12 digits.
“Organiser & Tools” → “Calculator”
Key operations for calculation are as follows:
2. Select the desired duration.
Resetting an Alarm Setting
“Organiser & Tools” → “Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarm Settings
“Organiser & Tools” → “Alarms”
1. Select “Clear All”.
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press
.
To start a new calculation, press U.
Rate Conversion
You can also use the calculator as a currency calculator to convert
from/to a home currency using a conversion rate that you enter.
84
Organiser & Tools
Sending Voice Clips
“Organiser & Tools” → “Voice Recorder”
1. Press
to start recording.
To Set a Currency Conversion Rate
“Organiser & Tools” → “Calculator” → [Options] →
“Currency Converter” → “Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Press
to stop recording.
3. Select “Save and Send”.
4. Select “As Message”.
2. Enter the currency conversion rate.
To Convert a Value
“Organiser & Tools” → “Calculator”
1. Enter the value to be converted.
For details on creating a message, see “Creating a New
Message” on page 50.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
Voice Recorder (M 7-4)
This allows you to record a voice clip, which can be used to remind
you of schedule entries or be sent within a multimedia message. The
recorded voice clip is saved in Saved Sounds. Voice clips are saved
in AMR format.
Recording a Voice Clip
“Organiser & Tools” → “Voice Recorder”
1. Press
to start recording.
To stop recording before the recording time is over, press
2. Select “Save” to save the voice clip.
.
Selecting the Record Time
“Organiser & Tools” → “Voice Recorder” → [Options] →
“Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, voice clips are automatically
saved to a memory card.
Selecting Storage Memory
“Organiser & Tools” → “Voice Recorder” → [Options] →
“Save New Sounds”
1. Select the desired location.
When selecting “Choose bef. Saving”, you can select the location
when saving a voice clip.
Note
• Press a (or V) or b (or W) to adjust the sound volume when
playing back the recorded file.
Organiser & Tools
85
Scanner (M 7-5)
With the built-in digital camera, you can read texts and barcodes in
Jan format and QR codes, and create QR codes. The scanned data
can be saved as a Contacts List entry, URL, Email address and text.
Note
• When scanning does not take place, it may be due to one of the
following reasons: type or size of barcode, scratches, dirt, damage,
print quality, light reflection, etc.
Reading Barcodes
“Organiser & Tools” → “Scanner” → “Scan Barcode”
1. Display the barcode using the external camera.
2. Press
.
3. Press [Options] and select the desired option.
The options vary depending on the scanned data.
“Open Link”:
The browser opens the URL.
“Copy URL”:
The URL is copied.
“Send Message”: The result is sent as SMS or MMS.
“Copy”:
The result is copied.
To Use the Continuous Scanning
1. In scanning mode, press [Options] and select “Continuous
Scan”.
2. Select “On” or “Off”.
86
Organiser & Tools
Opening a Barcode Picture
“Organiser & Tools” → “Scanner” → “Open Barcode”
1. Select the desired picture data for barcode.
Viewing the Scanned Data
“Organiser & Tools” → “Scanner” → “Scanned Results”
1. Highlight the data you wish to view, then press
.
Creating QR Codes
“Organiser & Tools” → “Scanner” → “Create QR Code”
1. Select the desired option.
“Text Input”:
Create a QR code using the text you enter.
“My Items”:
Create a QR code using the My Items data.
2. Enter the desired text or select the desired data, then press
.
3. Press
to save.
Tip
• The QR code is saved in a PNG format file.
Scanning Text
“Organiser & Tools” → “Scanner” → “Scan Text”
1. Display text using the camera.
2. When the bar under the scanned text is blue, press
3. Press a or b to select the desired text, then press
4. Press [Options] and select the desired option.
“OK”:
“Select/Edit”:
“Change Mode”:
.
.
The scanned result is in the text entry
screen.
The scanned result can be modified.
The scanned result can be converted to a
web address, mail address, phone number
or to roman text.
To Use Reversed Text
1. In scanning mode, press [Options] and select “Reversed Text”.
2. Select the desired option from “Auto”, “Normal” or
“Reversed”.
E-Book (M 7-6)
Tip
• When a call arrives while the viewer is on or when you exit an
E-Book, “Auto Bookmark1” is automatically added on the last
page you have viewed. The page with the bookmark automatically
opens when you select the file the next time. The new bookmark is
now “Auto Bookmark1”, turning the previous bookmark to “Auto
Bookmark2”.
Adding a Bookmark
You can add up to two bookmarks to each E-Book file.
“Organiser & Tools” → “E-Book”
1. Select the desired file.
2. Press [Options] and select “Bookmark”.
3. Select “Bookmark1” or “Bookmark2”.
Note
• E-Book files cannot be viewed while “Music” or “Games &
Applications” is in use.
• If you remove the memory card while the E-Book is in use, a
confirmation message appears and your phone returns to standby.
This function allows you to view E-Book files (XMDF or Text files)
stored in a memory card.
“Organiser & Tools” → “E-Book”
1. Select the desired file.
To scroll the screen up and down (to previous or next line), press
a or b. To jump to the previous or the following pages, press
c or d.
2. Press F when finished.
Organiser & Tools
87
Stopwatch (M 7-7)
You can store 4 lap times when using the stopwatch function.
“Organiser & Tools” → “Stopwatch”
1. Press
to start.
Press [LAP] to view the lap time before the stopwatch stops. Last
4 lap times are saved.
2. Press
to stop.
Tip
• You can save a record of lap time and stop time in Text Templates
by pressing [Options] and selecting “Save to Templates”.
Resetting Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
Tasks (M 7-8)
You can register your schedule as task entries for a given date or
time.
Creating a New Entry
“Organiser & Tools” → “Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and then due time.
88
Organiser & Tools
4. Select the reminder time.
When selecting “Other”, enter the desired reminder date and
time.
5. Press [Save].
Note
• If the date and time settings have not been entered, the date and
time entry screen is displayed (p. 100).
To Change the Type of Alarm Tone or Video Clip File
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset Sounds” or “My
Sounds”, or select “Assign Video”.
4. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone” on
page 94.
To Change the Duration of Alarm Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Duration”.
3. Select the time period.
When you select “Other”, you can enter the desired time in two
digits using the keypad.
To Change the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the task entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to leave it
as it is.
To Make the Entry Completed or Uncompleted
“Organiser & Tools” → “Tasks”
1. Highlight the desired entry.
For details on creating a message, see “Creating a New
Message” on page 50.
For details on Bluetooth wireless settings, see “Bluetooth” on
page 111.
For details on Infrared settings, see “Infrared” on page 113.
Note
• When pairing, you need to enter your passcode when establishing
contact with a Bluetooth wireless technology enabled device for the
first time.
Viewing the Memory Status
“Organiser & Tools” → “Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser & Tools” → “Tasks” → [Options] → “Delete”
1. Select the desired option.
“This Task”:
Deletes the selected entry.
“All Completed Tasks”: Deletes all checked entries.
“All Tasks”:
Deletes all entries.
2. Press
.
3. On the view screen, press [Options] and select “Check”.
To make the entry uncompleted, select “Uncheck”.
Sending a Task Entry
“Organiser & Tools” → “Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
Organiser & Tools
89
World Clock (M 7-9)
Setting the Time Zone
“Organiser & Tools” → “World Clock”
1. Press [Edit] and select “Set Time Zone”.
The current time zone is indicated by red line on the world map.
2. Press c or d to change the time zone.
3. Press
.
To Set the Custom Time Zone
“Organiser & Tools” → “World Clock”
1. Press [Edit] and select “Set Time Zone”.
2. Press [Options] and select “Set Custom Zone”.
3. Enter the desired city name and time.
Setting the Daylight Saving
“Organiser & Tools” → “World Clock”
1. Press [Edit] and select “Daylight Saving”.
2. Select “On” or “Off”.
Countdown Timer (M 7-10)
“Organiser & Tools” → “Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press
to start counting.
90
Organiser & Tools
3. Press
to pause.
Press
again to continue counting.
4. If the countdown has finished, press [Cancel] and then press
to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and select
“Edit”.
2. Modify the desired time.
Expenses Memo (M 7-11)
You can record an expenses memo with predefined or edited
categories.
Recording in the Expenses Memo (M 7-11-1)
“Organiser & Tools” → “Expenses Memo” → “Add New
Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Viewing Totals (M 7-11-2)
“Organiser & Tools” → “Expenses Memo” → “Totals”
Recorded expenses are displayed on the screen.
To Change Amount
1. In the total view, select the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
To Delete a Recorded Item or All Items
1. In the total view, select the desired item.
2. Press [Options] and select “Delete Item” or “Delete All”.
Editing the Category Name (M 7-11-3)
“Organiser & Tools” → “Expenses Memo” → “Edit Category”
1. Select the desired category name.
2. Modify the name.
Phone Help (M 7-12)
You can view the help list and use it to guide you in the phone’s
functions.
“Organiser & Tools” → “Phone Help”
1. Press a or b.
Organiser & Tools
91
SIM Application (M 11)
You can refer to the information on the SIM/USIM. Contact your
service provider for further details.
92
SIM Application
Settings (M 12)
Profiles (M 12-1)
The ringtone, sound, vibration and light settings can be customised
for each profile according to your environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”,
“Headset” and “Silent”.
Activating a Profile
“Settings” → “Profiles”
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator described on
page 17 is displayed in standby.
Tip
• In standby, press and hold R to switch Profiles between Silent
mode and the profile most recently activated.
Resetting Profile Settings
“Settings” → “Profiles”
1. Highlight the profile you wish to reset.
Volume
You can adjust the volume for incoming voice calls, SMS/MMS/Email
messages and other sounds (“General Volume”) to one of six levels,
or set an increasing volume for all of these except “General Volume”.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
4. Select “For Incoming Call”, “For New Message” or “General
Volume”.
5. Press a (or d) to increase the ringer volume or press b (or
c) to decrease the ringer volume and then press
.
To select “Increasing Volume”, press a (or d) at level 5.
To select “Silent”, press b (or c) at level 1.
Tip
• You can select from two levels or an increasing volume, when
selecting the “Silent” profile.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
Settings
93
Assigning a Ringtone
You can select the ringtone from 28 tones including 5 patterns, 13
sound effects and 10 melodies. You can also select a sound in Saved
Sounds as the default ringtone, excluding the AMR format.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
6.
7.
Press [Options] and select “Personalise”.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Call”.
Select “Assign Tone”.
Select “Preset Sounds” or “My Sounds”.
Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select “Play”.
8. Press [Options] and select “Assign” for “Preset Sounds” or
“Select” for “My Sounds”.
Note
• Even if you delete a ringtone that uses a sound in Sounds &
Ringtones, the setting remains the same and the default ringtone
sounds. If you delete a ringtone assigned for the ringtone, the
default ringtone is set.
94
Settings
Assigning a Ring Video Clip File
You can select a video clip file in Saved Videos as the default ring
video clip file.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
6.
Press [Options] and select “Personalise”.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Call”.
Select “Assign Video”.
Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
7. Press [Options] and select “Select”.
Message Notification
When receiving messages, your phone will notify you of their arrival
with the ringtone or ring video you specify.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
Keypad Tones
When the keypad tone is set on, you will hear a confirmation tone
each time you press any keys.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
2.
3.
4.
5.
6.
Press [Options] and select “Personalise”.
Select “Ringtone/Ringvideos”.
Select “For New Message”.
Select “Assign Tone” or “Assign Video”.
If “Assign Tone” is selected, select “Preset Sounds” or “My
Sounds”.
6. Highlight the desired ringtone or ring video clip.
For details on selecting a ringtone or a ring video, see “Assigning
a Ringtone” or “Assigning a Ring Video Clip File” on page 94.
7. Press [Options] and select “Assign” for “Preset Sounds” or
“Select”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration.
Press [Options] and select “Personalise”.
Select “System Sounds”.
Select “Keypad Tones”.
Highlight the desired tone pattern.
Press [Options] and select “Assign”.
Warning Tone
Your phone emits a warning tone when an error occurs.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
Press [Options] and select “Personalise”.
Select “System Sounds”.
Select “Warning Tone”.
Select “Tone” or “Duration”.
For “Tone”, select “Off”, “Preset Sounds” or “My Sounds”.
For “Duration”, select the desired time between 0.5 and 2
seconds.
Settings
95
Power On/Off Sound
The phone can be set to emit a sound when it is switched on or off.
You can set the duration and melody of the sound.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
Event Light
When the light option is on, the mobile light blinks while the phone
receives a call or message.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
2. Press [Options] and select “Personalise”.
3. Select “Event Light”.
4. Select “For Voice Call”, “For Video Call” or “For New
Press [Options] and select “Personalise”.
Select “System Sounds”.
Select “Power On Sound” or “Power Off Sound”.
Select “Sound” or “Duration”.
For “Sound”, select “Off”, “Preset Sounds” or “My Sounds”.
Vibration
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “On”, “Link to Sound” or “Off”.
Tip
• When the “Link to Sound” option is selected in step 4, the vibrator
pulses in time with the selected melody. Please note that not all
melodies support the “Link to Sound” option.
• When you select “On” or “Link to Sound” in step 4, “ ” is
displayed in standby.
96
Settings
Message”.
5. Select “Switch On/Off”.
6. Select “On” or “Off”.
To Change the Light Colour
You can select from 7 colours and 1 pattern for each profile.
1. In step 5 in “Event Light”, select “Light Colour”.
2. Select the desired colour.
Tip
• If you select “Disco” in step 2, all 7 colours flash in order.
Status Light
When the light option is on, the mobile light or small light blinks to let
you know when you have missed calls or new messages.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2.
3.
4.
5.
6.
Press [Options] and select “Personalise”.
Select “Status Light”.
Select “For Missed Call” or “For New Message”.
Select “Switch On/Off”.
Select “On(Mobile Light)”, “On(Small Light)” or “Off”.
To Change the Light Colour
You can select from 7 colours when “Status Light” is set to
“On(Mobile Light)”.
1. In step 5 in “Status Light”, select “Mobile Light Colour”.
2. Select the desired colour.
Any Key Answer
You can answer a call by pressing any key except F, U and
[Busy]. For details, see “Answering a Voice Call” on page 21.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
Setting the Display (M 12-2)
You can change the settings of the display.
Setting the Wallpaper (M 12-2-1)
For the standby screen, 5 pictures are provided.
Pictures taken with the digital camera or images downloaded from a
WAP site can be used for wallpapers.
To Set My Pictures
“Settings” → “Display Settings” → “Wallpaper”
1. Select “My Pictures”.
2. Select the desired picture.
3. After displaying the picture, press
.
Note
• Some pictures cannot be used because of their picture and data
types.
• If the picture in My Pictures is already set, it is displayed in step 1.
Press [Change] and select the desired picture.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
Settings
97
System Graphics (M 12-2-2)
Pictures can be displayed when turning the power on or off, when
receiving an incoming call, or when operating the alarm.
Pictures taken with the digital camera or images downloaded from a
WAP site can be used.
To Use Preset Animation/Pattern
“Settings” → “Display Settings” → “System Graphics”
1. Select the desired scene to set the picture to.
2. Select “Preset Animation” when you select “Power On” or
“Power Off” in step 1.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you select
“Incoming Call” or “Alarm” in step 1.
To Set My Pictures
“Settings” → “Display Settings” → “System Graphics”
1. Select the desired scene to set the picture to.
2.
3.
4.
5.
Select “My Pictures”.
Select the desired picture.
After displaying the picture, press
.
Specify the area you wish to display using the navigation keys.
Note
• Some pictures cannot be used because of their picture and data
types.
• If the picture in My Pictures is already set, it is displayed in step 2.
Press [Change] and select the desired picture.
98
Settings
Setting the Font Weight (M 12-2-3)
“Settings” → “Display Settings” → “Font Settings”
1. Select “Thin”, “Normal”, “Bold” or “Bolder”.
The preview image is displayed in the selected weight.
Setting the Greeting Message (M 12-2-4)
You can set the message which is displayed when the phone is
turned on.
“Settings” → “Display Settings” → “Greeting Message” →
“Switch On/Off”
1. Select “On” or “Off”.
2. Select “Edit Message” and enter the message (up to 10
characters).
Backlight (M 12-2-5)
The backlight will shut off if you do not press the keypad for a certain
length of time. You can specify a desired time to elapse before the
backlight shuts off, which will help conserve battery life.
Tip
• When you purchase this phone, Backlight is set to 15 seconds.
To Select the Backlight Time Out
“Settings” → “Display Settings” → “Backlight” →
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
To Adjust the Brightness of the Backlight
“Settings” → “Display Settings” → “Backlight” →
“Brightness”
1. Press a and b to switch between 4 levels of clarity.
2. Press
.
Setting the Display Saving (M 12-2-6)
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the Display
Saving goes into effect, which will help conserve battery life.
“Settings” → “Display Settings” → “Display Saving”
1. Select the desired time.
When you purchase this phone, Display Saving is set to 2
minutes.
Note
• Display Saving does not work while you are making a call, using
WAP, or using an application.
• To cancel the Display Saving: The display saving continues until
either a key is pressed or there is an incoming alert. The first key
press only cancels this function. You must press another key in
order to enter any numerical or text value.
Setting Video Out (M 12-2-7)
With the optional cable, you can connect your phone to other device,
such as TVs or videos set to output, and display images or video clips
stored on your phone. It is also possible to output and display data
stored in the memory card.
To Set Output Function On
You need to connect your phone to the other device with the optional
cable beforehand.
“Settings” → “Display Settings” → “Video Output” →
“Switch On/Off”
1. Select “On”.
Select “Off” on the Output screen when finished.
Note
• When closing your phone, you cannot output data to the connected
device.
• It is not possible to output some images or video clips.
Settings
99
To Select Display Size
You can display images in enlarged size.
“Settings” → “Display Settings” → “Video Output” →
“Display Size”
1. Select “Enlarge”.
To display in original size, select “Original Size”.
To Rotate Image
“Settings” → “Display Settings” → “Video Output” →
“Rotation Setting”
1. Select the desired item.
The image displayed on the device will rotate until the selected
degree.
To Select TV System
You need to select the appropriate TV system. Refer to the instruction
manual of your connected device to confirm the TV system.
“Settings” → “Display Settings” → “Video Output” → “TV
System”
1. Select the desired item.
Sound Settings (M 12-3)
You can use this menu to check or edit the current Profiles settings
(except “Any Key Answer”).
Setting the Surround Sound
“Settings” → “Sound Settings” → “Surround”
1. Select “On”, “Link to Sound” or “Off”.
100
Settings
Date & Time (M 12-4)
You need to set the correct time and date in order for your phone’s
various time-based functions to work correctly.
“Settings” → “Date & Time” → “Set Date/Time”
1. Enter the day, month and year using the digit keys.
2. Enter the time using the digit keys.
Tip
• When you enter the time in the 12-hour format, press a or b
to switch between am and pm. The order in which the date and
time is displayed is based on the format setting.
Setting the Daylight Saving (M 12-4-2)
“Settings” → “Date & Time” → “Daylight Saving”
1. Select “On” or “Off”.
Setting the Time Zone (M 12-4-3)
“Settings” → “Date & Time” → “Set Time Zone”
1. Press c or d to select the home city to set.
2. Press
.
Customising the Time Zone
“Settings” → “Date & Time” → “Set Time Zone” → [Options]
→ “Set Custom Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between − and +.
.
3. Press
Display Date & Time (M 12-4-4)
You can display the calendar or the current date and/or time in
standby.
To Set the Clock Display
“Settings” → “Date & Time” → “Display Date & Time” →
“Show Clock”
1. Select the desired clock type or “Off” to set clock display off.
To Set the Calendar Display
“Settings” → “Date & Time” → “Display Date & Time” →
“Show Calendar”
1. Select the desired calendar type or “Off” to set calendar
display off.
Selecting the Date Format (M 12-4-7)
“Settings” → “Date & Time” → “Date Format”
1. Select “D.M.Y”, “M-D-Y” or “Y/M/D”.
Setting the Calendar Format (M 12-4-8)
“Settings” → “Date & Time” → “Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
Language Setting (M 12-5)
You can change the language displayed on the phone.
“Settings” → “Language”
1. Select the desired language.
Note
• If you select “Automatic” in step 1, the language preset on the SIM/
USIM card is selected.
• If the language preset on the SIM/USIM card is not supported, then
the default language of the phone is selected.
Tip
• You can also change the input language on the text entry screen
(p. 30).
World Clock (M 12-4-5)
For details, see “World Clock” on page 90.
Selecting the Time Format (M 12-4-6)
“Settings” → “Date & Time” → “Time Format”
1. Select “24 Hour” or “12 Hour”.
Settings
101
Call Settings (M 12-6)
Voicemail & Diverts (M 12-6-1)
This service can be used to divert incoming calls that you cannot
answer. Calls can be diverted to another phone number or to your
voicemail system.
Note
• This service may not be available on all mobile phone networks.
Contact your service provider for more information.
To Set the Voicemail Numbers
You can divert calls to the network voicemail service centre.
Depending on whether you are inside or outside your network area,
you can set two voicemail numbers, a number for your home network
area or for a roaming network area.
Note
• This service depends on the SIM card. Contact your SIM card
vendor for more information.
“Settings” → “Call Settings” → “Voicemail & Diverts” →
“Voicemail” → “Settings” → “Voicemail Numbers”
1. Select “Home Mailbox” or “Roam Mailbox”.
2. Enter the desired phone number.
102
Settings
To Access the Voicemail Centre
1. Press and hold G in standby.
To Activate the Voicemail Service
“Settings” → “Call Settings” → “Voicemail & Diverts” →
“Voicemail” → “Activate”
1. Select one of the following options:
“Always”:
Diverts all calls without ringing.
“When Busy”:
Diverts incoming calls while you are talking
on the phone.
“No Answer”:
Diverts incoming calls if you do not answer
a call within a certain period of time.
“Not Reachable”: Diverts incoming calls when your phone has
no network service or is switched off.
If you select “No Answer”, select the period of time from 6 levels
(05 to 30 seconds).
2. Press
.
To Activate the Diverts Service
Select the appropriate option.
“Settings” → “Call Settings” → “Voicemail & Diverts” →
“Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further divert options.
2. Select “Always”, “When Busy”, “No Answer” or “Not
Reachable”.
If you select “No Answer”, select the period of time from 6 levels
(05 to 30 seconds).
3. Enter a phone number to which you wish to divert calls or
search for it in the Contacts List (p. 35).
4. Press
.
Note
• When “Voice Calls” diverts are set to “Always”, “
in standby.
” is displayed
To Check the Diverts Status
“Settings” → “Call Settings” → “Voicemail & Diverts” →
“Status”
1. Select the diverts option you wish to check.
To Deactivate the Diverts/Voicemail Service
“Settings” → “Call Settings” → “Voicemail & Diverts” →
“Deactivate”
1. Select the desired option.
To Cancel the Diverts and Voicemail Service
Once you have changed the diverts settings, you can cancel them all
with this service.
“Settings” → “Call Settings” → “Voicemail & Diverts” →
“Cancel All”
Call Waiting (M 12-6-2)
Note
• This service may not be available on all mobile phone networks.
Contact your service provider for more information.
If you wish to be able to receive another incoming call while you have
a call in progress, you must activate the Call Waiting service.
“Settings” → “Call Settings” → “Call Waiting”
1. Select “On”, “Off” or “Status”.
Showing Your Phone Number (M 12-6-3)
This lets you control whether to show your phone number when
calling another party or not.
“Settings” → “Call Settings” → “Show Your Number”
1. Select “On”, “Off” or “Status”.
Note
• Some networks do not support this service. Please check with your
service provider for availability.
Settings
103
Restrict Calls (M 12-6-4)
This function lets you place restrictions on incoming and outgoing
calls. To activate this option you will need the specified password,
which is available from your service provider.
“Settings” → “Call Settings” → “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
“Outgoing Calls”:
Restricts outgoing calls.
“Incoming Calls”:
Restricts incoming calls.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls except
emergency calls.
“Bar International Calls”: Restricts all outgoing international
calls.
“Only Local & Home”:
Restricts all outgoing international
calls except to your home country.
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”:
Restricts all incoming calls when you
are outside of the coverage from your
registered service provider.
3. Select one of the following options:
“All Services”:
Restricts all services.
“Voice Calls”:
Restricts all voice calls.
“Video Calls”:
Restricts all video calls.
“Fax”:
Restricts all fax calls.
“Messages”:
Restricts all messages.
104
Settings
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings” → “Call Settings” → “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Rejecting an Incoming Call
You can register phone numbers you do not wish to answer.
To Reject the Registered Number
“Settings” → “Call Settings” → “Restrict Calls” →
“Rejected Numbers” → “Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings” → “Call Settings” → “Restrict Calls” →
“Rejected Numbers” → “Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Withheld Call
When the “Withheld Call” is set, incoming calls without a CLI (Calling
Line Identification) are rejected.
“Settings” → “Call Settings” → “Restrict Calls” →
“Withheld Call”
1. Select “On” or “Off”.
Changing the Network Password
“Settings” → “Call Settings” → “Restrict Calls” → “Change
N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter the
password again.
4. Press
.
Fixed Dialling Number
When the Fixed Dialling Number is enabled, you can only call
pre-registered numbers.
To Enable Fixed Dialling Number
“Settings” → “Call Settings” → “Restrict Calls” → “Fixed
Dialling Number” → “Switch On/Off”
1. Select “On” to enable this function.
To Add a New Name
“Settings” → “Call Settings” → “Restrict Calls” → “Fixed
Dialling Number” → “Edit Dial List”
1. Highlight the blank entry, press [Options], then select “Add
New Dial”.
2. Enter your PIN2 code.
3. Add a name and a phone number.
For details on adding a name and a phone number, see “Add New
Contact” on page 35.
4. Press [Save].
Minute Minder (M 12-6-5)
Minute Minder function informs you of your talk time by sounding a
tone after every minute.
“Settings” → “Call Settings” → “Minute Minder”
1. Select “On” or “Off”.
Displaying Call Time Counter (M 12-6-6)
“Settings” → “Call Settings” → “Call Time Counter”
1. Select “On” or “Off”.
Displaying Call Costs (M 12-6-7)
“Settings” → “Call Settings” → “Display Call Cost”
1. Select “On” or “Off”.
Settings
105
Auto Redial (M 12-6-8)
“Settings” → “Call Settings” → “Auto Redial”
1. Select “On” or “Off”.
Video Call Settings (M 12-7)
Set various types of functions and services for video calls.
Selecting the Camera Picture (M 12-7-1)
You can select an image shown to the caller between the sub camera
image and an alternative image.
“Settings” → “Video Call Settings” → “Camera Picture”
1. Select “Default Image”.
2. Select “Internal Camera” or “Alternative Image”.
To Select the Picture for the Alternative Image
This function is available only when “Alternative Image” is selected
for “Default Image”.
“Settings” → “Video Call Settings” → “Camera Picture”
1. Select “Alternative Image”.
2. Select “Preset Picture” or “My Pictures”.
3. Select the desired picture.
Turning On or Off the Speakers (M 12-7-2)
“Settings” → “Video Call Settings” → “Loudspeaker”
1. Select “On” to turn on the loudspeakers on the sides of your
phone, or select “Off” to turn it off.
106
Settings
Selecting the Picture Quality (M 12-7-3) (M 12-7-4)
Select the desired data format for your environment.
“Settings” → “Video Call Settings” → “Incoming Picture
Quality”
“Settings” → “Video Call Settings” → “Outgoing Picture
Quality”
1. Select “Normal”, “Quality Priority” or “Frame Rate Priority”.
Select “Frame Rate Priority” to perform faster communication.
Backlight (M 12-7-5)
With this setting On, the phone’s backlight is on when making a video
call.
“Settings” → “Video Call Settings” → “Backlight”
1. Select “Always On”, “Always Off” or “As Normal Setting”.
The “As Normal Setting” option depends on the backlight setting
of the main display (p. 99).
Mute (M 12-7-6)
You can mute the microphone while making a video call.
“Settings” → “Video Call Settings” → “Mute Microphone”
1. Select “On” to mute or “Off” to cancel mute.
Assigning Hold Guidance Picture (M 12-7-7)
You can display an image saved in the phone on your main display
while you are putting a call on hold.
“Settings” → “Video Call Settings” → “Hold Guidance
Picture”
1. Select “Preset Picture” or “My Pictures”.
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/USIM
card. Before you change the PIN code, select “On” in step 1 in
“Enabling/Disabling the PIN Code”.
“Settings” → “Security” → “PIN Entry” → “Change PIN”
1. Enter the existing PIN code.
2. Select the desired picture.
2. Enter a new PIN code.
3. Enter the new PIN code again.
Security (M 12-8)
Enabling/Disabling the PIN Code (M 12-8-1)
If the PIN code is enabled you are asked to enter the PIN code each
time the phone is switched on. Your PIN code is registered on the
SIM/USIM card and you should have been made aware of the code
when you purchased the SIM/USIM card. Contact your service
provider for further details.
“Settings” → “Security” → “PIN Entry” → “Switch On/Off”
1. Select “On” to enable the PIN code or “Off” to disable.
2. Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2, the SIM/USIM
card will lock. To remove the lock, contact your service provider/
SIM/USIM card vendor.
Changing the PIN2 Code (M 12-8-2)
The PIN2 code is used to protect certain functions in the phone such
as Fixed Dialling Number and call cost limits. The following shows you
how to change the PIN2 code.
“Settings” → “Security” → “Change PIN2”
1. Enter the existing PIN2 code.
2. Enter a new PIN2 code.
3. Enter the new PIN2 code again.
Handset Lock (M 12-8-3)
The Handset Lock is an additional security feature which prevents
unauthorised use of the phone or certain features.
“Settings” → “Security” → “Handset Lock”
1. Select “On” or “Off”.
2. Enter your handset code.
Settings
107
Function Lock (M 12-8-4)
By setting this option on, all the functions of your phone will be locked
until the correct handset code is entered.
“Settings” → “Security” → “Function Lock”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code”.
Master Reset (M 12-9)
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function Lock off.
Note
• All settings are not reset.
Contacts Lock (M 12-8-5)
The Contacts Lock function prevents unauthorised use of your
Contacts List.
“Settings” → “Security” → “Contacts Lock”
1. Select “On” to lock or “Off” to unlock.
Resetting All Settings from M1 to M12 and All Created Data
(M 12-9-2)
“Settings” → “Master Reset” → “Reset All”
1. Enter your handset code.
For details on the handset code, see “Changing the Handset
Code”.
2. Enter your handset code.
Showing Secret Data (M 12-8-6)
By setting this option on, the hidden data can be displayed.
“Settings” → “Security” → “Show Secret Data”
1. Select “On” to display or “Off” to hide.
2. Enter your handset code when you select “On”.
Changing the Handset Code (M 12-8-7)
The default handset code is “9999”.
“Settings” → “Security” → “Change Handset Code”
1. Enter the old handset code.
2. Enter a new handset code.
3. Enter the new handset code again.
108
Settings
Resetting Settings from M1 to M12 (M 12-9-1)
“Settings” → “Master Reset” → “Reset Settings”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code”.
Call Log (M 9)
The phone will record the last 30 missed calls, received calls and
dialled numbers.
Viewing Call Log
“Call Log”
1. Select “All Calls”, “Dialled Numbers”, “Missed Calls” or
“Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press
.
Tip
• You can also confirm call logs by pressing D in standby.
Sending Messages
1. In the call log list, highlight the phone number or name you
wish to send a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New
Message” on page 50.
Call Timers (M 9-5)
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All Calls
“Call Log” → “Call Timers”
1. Select “Received Calls” or “Dialled Calls”.
Resetting Call Timers (M 9-5-3)
“Call Log” → “Call Timers” → “Clear Timers”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
Data Counter (M 9-6)
You can confirm the number of bytes used in the 3G (UMTS) and GSM
transmission.
“Call Log” → “Data Counter”
1. Select “Last Data” or “All Data”.
Resetting All Data Counter (M 9-6-3)
“Call Log” → “Data Counter” → “Clear Counter”
Note
• The Postcard service is not available with some service providers.
Please contact your service provider for more information.
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete” or
“Delete All”.
Call Log
109
Call Costs (M 9-7)
This function lets you check the charges for your calls. Some
networks do not support Charging Advice. Please check with your
service provider for availability.
Checking the Cost of the Last Call (M 9-7-1)
“Call Log” → “Call Costs” → “Last Call”
Checking the Total Call Cost (M 9-7-2)
“Call Log” → “Call Costs” → “All Calls”
Setting the Charge Rate (M 9-7-5)
Set the charge rate to calculate the call cost and set the maximum
limit for call cost.
“Call Log” → “Call Costs” → “Cost Units” → “Set Units”
1. Enter your PIN2 code.
2. Enter a currency unit (up to 3 characters).
3. Enter a cost per unit.
To enter a decimal point, press P.
Setting the Charge Limit (M 9-7-6)
This function is useful if you wish to make sure you do not exceed a
certain charge limit.
“Call Log” → “Call Costs” → “Max Cost” → “Set Limit”
1. Enter your PIN2 code.
2. Enter a value.
110
Call Log
Checking the Residual Credit (M 9-7-3)
“Call Log” → “Call Costs” → “Residual Credit”
Resetting All Call Costs (M 9-7-4)
“Call Log” → “Call Costs” → “Clear Costs”
1. Enter your PIN2 code.
Connectivity (M 10)
By configuring the settings in this menu, you can connect to Bluetooth
wireless technology or Infrared enabled phones via these
connections, as well as a PC via Bluetooth wireless technology or
Infrared connections.
Bluetooth (M 10-1)
For using the Bluetooth wireless function, you need to search for
other Bluetooth wireless technology enabled devices to establish
contact with your phone. Keep your phone within a distance of 10
metres from the devices before searching.
Using the Bluetooth Wireless Function
To Turn On or Off (M 10-1-1)
“Connectivity” → “Bluetooth” → “Switch On/Off”
1. Select “On” or “Off”.
The Bluetooth wireless setting is activated, “On” is selected and
“ ” is displayed.
To Show or Hide Your Phone (M 10-1-2)
“Connectivity” → “Bluetooth” → “Visibility”
1. Select the desired visibility settings.
“Show My Phone”:
Allows other devices to recognise your
phone.
“Hide My Phone”:
Hides your phone from other devices.
To Search for Devices to be Paired (M 10-1-3)
A maximum of 16 devices can be searched for.
“Connectivity” → “Bluetooth” → “Search for Devices”
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• If the Bluetooth wireless function is off before searching, the phone
turns the Bluetooth wireless function on automatically and starts
searching.
• You can only select one device for pairing. To change the paired
device, see “To Activate the Paired Device” on page 112.
Tip
• You can save battery power by turning the Bluetooth wireless
function off while it is not in use. Turn the Bluetooth wireless
function off in “To Turn On or Off” on this page or in “To Turn Off
Automatically” on page 113.
• During a call, you can divert voice calls to the paired handsfree
device. Press [Options], select “Transfer Audio” and then “To
Bluetooth” or “To Handset”.
Connectivity
111
To Activate the Paired Device (M 10-1-4)
Paired devices are listed by tabs for all devices and for handsfree
devices.
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
To Check and Uncheck the Paired Handsfree Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Select handsfree device list.
2. Press [Options] and select “Check” or “Uncheck”.
To Rename or Delete the Paired Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press c or d to switch between all devices and handsfree
devices.
2. Highlight the desired device.
3. Press [Options] and select “Change Name” or “Delete”.
To Send All Data to Other Devices (M 10-1-5)
You can send all the data for applications such as Contacts List,
Calendar, Tasks, etc. to selected devices.
“Connectivity” → “Bluetooth” → “Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
112
Connectivity
2. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
3. Select the desired data to send.
4. Enter the device passcode for unpaired devices.
Note
• If the handsfree device is connected, the confirmation screen to
deactivate the handsfree function is displayed. Press [Yes] to
deactivate.
Bluetooth Wireless Settings (M 10-1-6)
With this setting you can rename your phone, prevent other phones
from recognising your phone, turn the Bluetooth wireless function off
automatically to save battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in other devices
when your phone is detected.
“Connectivity” → “Bluetooth” → “Bluetooth Settings” →
“Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Connectivity” → “Bluetooth” → “Bluetooth Settings” →
“Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically after the specified
time.
Infrared (M 10-2)
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two modes;
talking with the handsfree kit or talking with the phone.
“Connectivity” → “Bluetooth” → “Bluetooth Settings” →
“Handsfree Setting”
1. Select “Private mode” or “Handsfree mode”.
“Private mode”:
For talking with the phone
“Handsfree mode”: For talking with the handsfree kit
Turning On or Off (M 10-2-1)
“Connectivity” → “Infrared” → “Switch On/Off”
1. Select “On” or “Off”.
The infrared setting is activated, and “ ” is displayed.
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX data to
authenticate the passcode (exchanging the passcode) before pairing
devices.
“Connectivity” → “Bluetooth” → “Bluetooth Settings” →
“Authentication”
1. Select “On” or “Off”.
In order to use the infrared function, you need to search for other
infrared enabled devices to establish contact with your phone. Keep
your phone within a distance of 20 centimetres from the other phone
before searching. The infrared setting will return to off when no data
is transmitted/received via infrared communication.
Sending All Data to Other Devices (M 10-2-2)
“Connectivity” → “Infrared” → “Send All”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
2. Select the desired data to send.
3. Enter the authorisation code.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the passcode when
the sender requests it.
To See Your Phone Details
“Connectivity” → “Bluetooth” → “Bluetooth Settings” →
“My Phone Details”
Connectivity
113
Network Settings (M 10-3)
Selecting a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
“Connectivity” → “Network Settings” → “Select Service”
1. Select “Auto”.
Selecting a Service Manually
“Connectivity” → “Network Settings” → “Select Service”
1. Select “GSM”.
Selecting a Network Automatically
Each time the power is turned on, your phone always tries to connect
to the preferred network.
If your phone is not connected to the network, you can perform the
following immediately to establish the preferred network connection.
“Connectivity” → “Network Settings” → “Select Network”
→ “Automatic”
Setting the Network Manually
“Connectivity” → “Network Settings” → “Select Network”
→ “Manual”
1. Select the desired network.
Adding a New Network
“Connectivity” → “Network Settings” → “Select Network”
→ “Add New Network”
If there are no entries, press
and go to step 2.
If there is an entry, press
and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
114
Connectivity
3.
4.
5.
6.
Enter the network code (up to 3 digits).
Enter a new network name (up to 25 characters).
Select “Select network type”.
Select the desired network.
Editing the Preferred List
“Connectivity” → “Network Settings” → “Select Network”
→ “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add to
end” to insert at the end or “Delete” to delete.
Showing the Network Information (M 10-3-3)
“Connectivity” → “Network Settings” → “Network
Information”
Information about the operator name, package and services are
displayed.
Flight Mode (M 10-4)
When the Flight Mode is set to “On”, the phone cuts off the network
connections and stops searching for available networks to connect.
With this mode, you can play games or music even when you fly.
“Connectivity” → “Flight Mode”
1. Select “On” or “Off”.
Internet Settings (M 10-5)
Note
• In normal operations, you do not need to change the settings.
• Internet settings have already been entered in your phone
depending on your service provider. You may have restrictions on
viewing, deleting, copying or modifying the settings. Contact your
service provider for details.
WAP Settings (M 10-5-1)
“Connectivity” → “Internet Settings” → “WAP Settings” →
“Create New”
“Profile Name”:
WAP profile name (Unique name)
“Proxy”:
Proxy setting for WAP (When “Use
Proxy” is On)
“Access Point”:
Access point for WAP (When “Use
Proxy” is Off)
“Use Proxy”:
Setting to connect by Proxy or not
“Home”:
Home page URL (When “Use Proxy” is
Off)
Streaming Settings (M 10-5-2)
“Connectivity” → “Internet Settings” → “Streaming
Settings” → “Create New”
“Profile Name”:
Profile name for streaming (Unique
name)
“Proxy Address”:
Proxy address
“Proxy Port Number”:
Port number (1-65535)
“Access Point”:
Access point
Proxy Settings (M 10-5-3)
“Connectivity” → “Internet Settings” → “Proxy Settings” →
“Create New”
“Proxy Name”:
Proxy name (Unique name)
“Proxy Address”:
IP address
“Access Point”:
Access point
“Home”:
Home page URL
“Port Number”:
Port number (1-65535)
“Authentication Type”:
Authentication Type (“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”:
User name for authentication
“Password”:
Password for authentication
Connectivity
115
Access Point Settings (M 10-5-4)
“Connectivity” → “Internet Settings” → “Access Point
Settings” → “Create New”
“Access Point Name”:
Access point name (Unique name)
“APN”:
APN setting
“Authentication Type”:
Authentication type (“NONE”, “PAP” or
“CHAP”)
“User Name”:
User name for access point
“Password”:
Password for access point
“DNS”:
DNS (Domain Name System)
“Linger Time”:
Linger Time (1-99999 sec.)
Re-Provisioning Settings (M 10-5-5)
“Connectivity” → “Internet Settings” → “Re-Provisioning
Settings” → “Execute Pending”
Clearing DNS Cache (M 10-5-6)
“Connectivity” → “Internet Settings” → “Clear DNS Cache”
White List (M 10-5-7)
“Connectivity” → “Internet Settings” → “White List” →
“Create New”
“SMSC Address”:
SMSC address
“SM Orig. Address”:
SM originating address
116
Connectivity
To Activate the WAP/Streaming Profile
“Connectivity” → “Internet Settings”
1. Select “WAP Settings” or “Streaming Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the WAP/Streaming Profile
“Connectivity” → “Internet Settings”
1. Select “WAP Settings” or “Streaming Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”:
“Copy”:
“Delete”:
Modify the desired item.
Enter the new file name.
Press [Yes] to delete.
Memory Card (M 10-6)
With a memory card inserted in your phone, you can make backup
files of Bookmarks, Text, Contacts, Calendar and Tasks in the
handset memory card to the memory card. You can also restore the
backup data from the memory card.
Making a Backup File on the Memory Card
“Connectivity” → “Memory Card” → “Backup/Restore” →
“Backup”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
2. Select the desired item to backup or “Select All” to backup all
files.
Formatting Memory Card (M 10-6-2)
“Connectivity” → “Memory Card” → “Format Card”
1. Enter your handset code.
The default handset code is “9999”. For details on changing the
handset code, see “Changing the Handset Code” on page 108.
2. Press [Yes] to start formatting.
Restoring a Backup File
“Connectivity” → “Memory Card” → “Backup/Restore” →
“Restore”
1. Enter your handset code.
2. Select the desired item to restore or “Select All” to restore all
files.
3. Select the desired file to restore.
A confirmation message indicating deletion from the handset
memory is displayed.
4. Press [Yes].
Note
• To delete a backup file, highlight the desired item, press [Options]
and select “Delete” after performing steps 1 to 3.
Connectivity
117
Connecting 903SH to Your PC
You can use the following functions by connecting the 903SH to your
PC using an Infrared port, a USB port* or Bluetooth wireless
technology port:
• 3G/GSM modem
• Handset Manager for 903SH
* Requires an optional USB data cable XN-1DC30 for USB port
connection.
System Requirements
Operating System:
Windows 98*, Windows Me, Windows 2000**,
Windows XP***
* Windows 98 Second Edition
** Service Pack 4 or later
*** Service Pack 2 or later
Supported Software:
Microsoft Outlook/Outlook Express
Interface:
Infrared port, USB port or Bluetooth wireless port
CD-ROM drive
118
Connecting 903SH to Your PC
3G/GSM Modem
You can use 903SH as a 3G/GSM modem to access the Internet from
your PC. Connect your phone to your PC via Bluetooth wireless
technology or USB interface. Software installation on your PC is
required. For details, see “Software Installation” on page 119.
Modem via the USB Cable
To use the modem function using a USB cable, use the cable
mentioned above and see the instructions accompanying the cable.
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless technology
interface, see “Using the Bluetooth Wireless Function” on page 111
and turn the modem function on.
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible while communicating with
the Handset Manager via Bluetooth wireless technology, Infrared
or USB interface.
• Your phone exhausts the battery when connected to a PC, even
when not communicating.
Handset Manager
You can transmit the following items between your phone and your
PC, and can use Contacts List entries on your PC:
• My Items files (pictures/sounds/video clips/Other Documents data)
• Contacts List entries
• Schedule entries
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Infrared Communication
• Infrared ports need to be aligned with each other.
• Infrared ports need to be placed within 20 cm of each other and
within a 30 ° angle.
Software Installation
1. Insert the supplied CD-ROM into your CD-ROM drive.
The 903SH CD-ROM screen is displayed.
If the 903SH CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Press the desired button.
3. Follow the on-screen instructions to complete installation.
Note
• The phone may not recognise the USB data cable if it is connected
while an application (Camera, My Items, etc.) is running. Connect
the USB data cable in standby.
3G/GSM modem
• It is not recommended that you make or answer calls when you are
using 903SH as a 3G/GSM modem. The operation may be
interrupted.
Handset Manager
• Some large files may not be able to be transmitted from the PC to
the phone.
• Applications (Camera, My Items, etc.) do not run when the phone
is connected to the PC via Bluetooth wireless technology interface,
Infrared or USB data cable.
Connecting 903SH to Your PC
119
Troubleshooting
Problem
The phone does not turn on.
PIN code or PIN2 code is
rejected.
The SIM/USIM card becomes
locked.
The display is difficult to
read.
Phone functions do not work
after the phone is turned on.
120
Troubleshooting
Problem
Solution
• Make sure the battery is properly
inserted and charged.
• Make sure you have entered the
correct code (4 to 8 digits).
• Your SIM/USIM card/protected
functions will become locked after
three unsuccessful attempts.
• Contact your SIM/USIM provider if you
do not have the correct PIN code.
• Enter the PUK code (8 digits) provided
by your service provider (if supported).
• If the attempt is successful, enter the
new PIN code and confirm your phone
is operational again. Otherwise contact
your dealer.
• Adjust the backlight brightness for the
display.
• Check the radio signal strength
indicator as you may be outside the
service area.
• Check to see if any error message is
displayed when you turn your phone
on. If so, contact your dealer.
• Make sure the SIM/USIM card is
correctly inserted.
Calls cannot be made or
received.
Call quality is poor.
Solution
• If the message “Insert SIM Card” is
displayed when the phone is switched
on, you cannot use your SIM/USIM
card or the SIM/USIM card is
damaged. Contact your dealer or
network service provider.
• Check your call barring, fixed dialling
setting, remaining battery and call
forwarding settings.
• Check if your phone is currently
performing data communication using
Infrared (IrDA), Bluetooth wireless
technology interface or a USB data
cable.
• Check the remaining balance if you are
using a pre-paid SIM/USIM card.
• Your current location may not provide
good call quality (i.e., in a car or train).
Move to a location where radio signal
strength is greater.
Problem
Cannot access network
service.
Cannot send or receive text
message.
Cannot connect to
Multimedia Messaging
Service provider.
Limited memory available.
Call is terminated
unexpectedly.
No entries are displayed in
the Contacts List.
Solution
• Check where your account has been
registered and where the service is
available.
• Make sure you are correctly
subscribed for the Short Message
Service, that the network supports this
service, and that the centre number is
set up correctly. If not, contact your
network service provider.
• MMS settings and configuration may
be missing or incorrect or the network
does not support it. Check your service
provider’s access point number.
Contact your service provider to
confirm the correct settings.
• Delete any unnecessary data.
• Magnetised objects such as health
necklaces placed near the phone may
terminate the call. Keep your phone
away from such objects.
• Confirm that the Contacts Location
setting (Handset or SIM/USIM) is
correct.
Problem
Fax transmission failure.
Cannot receive OBEX data.
Solution
• Before transmitting fax data, configure
your fax software to use the software
flow control.
• Use of the optional data cable is
recommended for transmitting fax
data.
• The OBEX data can only be received
only in standby.
Troubleshooting
121
Safety Precautions and Conditions of
Use
Your phone conforms to international regulations insofar as it is used
under normal conditions and in accordance with the following
instructions.
CONDITIONS OF USE
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your phone may
interfere with the aircraft’s electronic systems). Current legislation
forbids this use and legal action can be taken against the user.
• Do not switch on your phone in a hospital, except in designated
areas.
• For body worn operation, this phone has been tested and meets RF
exposure guidelines when used with an accessory that contains no
metal and that positions the handset a minimum of 15 mm from
the body. Use of other accessories may not ensure compliance
with RF exposure guidelines.
• Use of your phone’s function may affect the performance of
medical electronic units (pacemakers, hearing aids, insulin pumps,
etc.). When the phone function is on, do not bring it near medical
equipment or into areas in which medical equipment is being used.
If you have a hearing aid or a pacemaker, only use the phone on
the opposite side of your body from where it is located. The phone
should be kept at least 6 inches (15.24 cm) from a pacemaker
ANYTIME the phone is switched on.
• Do not switch on your phone near gas or flammable substances.
122
Safety Precautions and Conditions of Use
• Observe the rules concerning the use of mobile phones at gasoline
stations, chemical plants and at all sites where a risk of explosion
exists.
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The product
can only be repaired by authorised service personnel.
• Do not drop your phone or subject it to severe impacts. Bending the
body and pushing the display or keys with extreme force could
damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry cloth.
• Do not carry your phone in your back pocket as it could break when
you sit down. The display is made of glass and is particularly
fragile.
• Avoid touching the external connector on the underside of the
phone, since the delicate components within can be damaged by
static electricity.
Battery
• Use your phone only with batteries, chargers and accessories
recommended by the manufacturer. The manufacturer disclaims
any liability for damage caused by the use of other chargers,
batteries or accessories.
• Network configuration and phone usage will affect
talk-time and standby time.
Using the games or camera will hasten battery consumption.
• When the battery charging alert is displayed on the screen,
charge the battery as soon as possible. If you continue using
your phone ignoring the alert, the phone may cease to function,
and all data and settings you have stored may be lost at any
moment.
• Before removing the battery from the phone, make sure the phone
is switched off.
• Replace and charge the new battery as soon as possible after
removing the old one.
• Do not touch the battery terminals. Batteries can cause damage,
injury or burns if a conductive material touches exposed terminals.
When the battery is detached from the phone, use a cover made
of non-conductive material for keeping and carrying the battery
safely.
• Recommended temperature for using and storing batteries is
approximately 20°C.
• The batteries’ performance is limited in low temperatures,
particularly below 0°C and the phone may not work temporarily
regardless of the amount of remaining battery power.
• Exposing the phone to extreme temperatures will shorten battery
life.
• The battery can be charged and discharged hundreds of times but
it will eventually wear out. When the operating time (talk-time and
standby time) is noticeably shorter than normal, it is time to buy a
new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 12.
Memory Card
• Do not remove or insert a memory card while data on the card is
being edited. Do not turn off the phone or device containing the
memory card while data on the card is being edited as this may
damage the data or cause the card to stop functioning correctly.
• Data may be lost under the following circumstances.
- If the phone is dropped, or shook, or force is applied while the
memory card is inserted.
- When the phone is used in areas that are exposed to static
electricity or electric noise.
• Backup your important data in case data on the memory cards are
lost due to malfunctions.
• Do not touch the metal terminals with your hands or metal objects.
Safety Precautions and Conditions of Use
123
• Do not bend the memory card or subject it to violent impact. Keep
it away from water and high temperatures.
• SHARP holds no responsibility for the loss or damage of data
contained on a memory card.
• Keep all memory cards out of the reach of small children.
Aerial Care
• Do not cover the top of the phone (p. 8, No. 21) with your hand
when in use as this may interfere with the performance of the
built-in aerial. Call quality may deteriorate leading to shortened
talk-time and standby time because the mobile phone has to
operate on a higher power level than is necessary.
• Use only the aerial supplied or one approved by Sharp for your
mobile phone. Using unauthorised or modified aerials may damage
the mobile phone. Moreover, since the mobile phone may violate
the appropriate regulations, it may lose performance or exceed the
limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of the
mobile phone.
• While talking directly to the microphone, please hold the mobile
phone so that the aerial is upwards over your shoulder.
• To avoid interfering with blasting operations, please turn off the
mobile phone in a blasting area or in a place where a “turn off
two-way radio” sign is posted.
124
Safety Precautions and Conditions of Use
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can become
blurred. When taking a picture, hold the phone firmly to prevent it
from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear focusing.
Wipe them off with a soft cloth before taking a picture.
Others
• As with any electronic storage unit, data may be lost or corrupted
under various circumstances.
• Before connecting the phone with a PC or a peripheral unit, read
the operation manual for the other unit carefully.
• If the phone’s battery has been removed for some time, or the
phone has been reset, the unit’s clock and calendar may be
reinitialised. The date and time should be updated in this case.
• The phone uses a magnet to recognise that the phone is closed.
Do not place magnetic cards near your phone or get the card
caught in the phone as it may damage the recorded data.
ENVIRONMENT
SAR
• Keep your phone away from extreme heat. Do not leave it on the
dashboard of a car or near a heater. Do not leave it in any place
that is extremely damp or dusty.
• Since this product is not waterproof, do not use it or store it where
fluids such as water can splash onto it. Raindrops, water spray,
juice, coffee, steam, perspiration, etc. will also cause
malfunctions.
Your mobile device is a radio transmitter and receiver. It is designed
not to exceed the limits for exposure to radio waves recommended by
international guidelines. These guidelines were developed by the
independent scientific organization ICNIRP and include safety
margins designed to assure the protection of all persons, regardless
of age and health.
PRECAUTIONS CONCERNING VEHICLE USE
• It is the user’s responsibility to check the local laws governing the
use of a mobile phone in vehicles. Pay full attention to driving. Pull
off to the side of the road, park the car, and switch off the engine
before making or answering a call.
• Use of your phone’s function may interfere with the vehicle’s
electronic systems, such as the ABS anti-lock brakes or the
air-bag. To ensure no such problem occurs, please check with
your dealer or car manufacturer before connecting your phone.
• Only allow qualified service maintenance personnel to install the
vehicle accessories.
The guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg
and the highest SAR value for this device when tested at the ear was
0.544 W/kg*. As mobile devices offer a range of functions, they can
be used in other positions, such as on the body as described in this
user guide**. In this case, the highest tested SAR value is 0.876 W/
kg.
As SAR is measured utilizing the devices highest transmitting power
the actual SAR of this device while operating is typically below that
indicated above. This is due to automatic changes to the power level
of the device to ensure it only uses the minimum level required to
reach the network.
The manufacturer disclaims any liability for damage which may result
as a consequence of improper use or use contrary to the instructions
contained herein.
Safety Precautions and Conditions of Use
125
The World Health Organization has stated that present scientific
information does not indicate the need for any special precautions for
the use of mobile devices. They note that if you want to reduce your
exposure then you can do so by limiting the length of calls or using a
‘hands-free’ device to keep the mobile phone away from the head
and body.
The tests are carried out in accordance with international
guidelines for testing.
** Please see the CONDITIONS OF USE section on page 122 about
body worn operation.
*
INFORMATION ON PROPER DISPOSAL
Attention:
126
Your product is marked with this symbol. It means that
used electrical and electronic products should not be
mixed with general household waste. There is a
separate collection system for these products.
Safety Precautions and Conditions of Use
A. Information on Disposal for Users (private households)
1. In the European Union
Attention:
If you want to dispose of this equipment, please do not
use the ordinary dust bin!
Used electrical and electronic equipment must be treated separately
and in accordance with legislation that requires proper treatment,
recovery and recycling of used electrical and electronic equipment.
Following the implementation by member states, private households
within the EU states may return their used electrical and electronic
equipment to designated collection facilities free of charge*. In some
countries* your local retailer may also take back your old product free
of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or
accumulators, please dispose of these separately beforehand
according to local requirements.
By disposing of this product correctly you will help ensure that the
waste undergoes the necessary treatment, recovery and recycling
and thus prevent potential negative effects on the environment and
human health which could otherwise arise due to inappropriate waste
handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local
authorities and ask for the correct method of disposal.
For Switzerland: Used electrical or electronic equipment can be
returned free of charge to the dealer, even if you
don’t purchase a new product. Further collection
facilities are listed on the homepage of
www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users.
1. In the European Union
If the product is used for business purposes and you want to discard
it:
Please contact your SHARP dealer who will inform you about the
take-back of the product. You might be charged for the costs arising
from take-back and recycling. Small products (and small amounts)
might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or
your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local
authorities and ask for the correct method of disposal.
PRECAUTIONS FOR USE IN USA
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the emission limits for exposure to
radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government. These limits are part of
comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific
studies. The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted
using standard operating positions specified by the FCC with the
phone transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the
phone is designed to operate at multiple power levels so as to use
only the power required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output.
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Safety Precautions and Conditions of Use
127
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that it does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g., at
the ear and worn on the body) as required by the FCC for each model.
The highest SAR value for this model phone when tested for use at
the ear is 0.355 W/kg and when worn on the body, as described in
this user guide, is 0.426 W/kg. Body-worn Operation; This device
was tested for typical body-worn operations with the back of the
phone kept 1.5 cm from the body. To maintain compliance with FCC
RF exposure requirements, use accessories that maintain a 1.5 cm
separation distance between the user’s body and the back of the
phone. The use of belt-clips, holsters and similar accessories should
not contain metallic components in its assembly.
The use of accessories that do not satisfy these requirements may
not comply with FCC RF exposure requirements, and should be
avoided. While there may be differences between the SAR levels of
various phones and at various positions, they all meet the government
requirement for safe exposure.
128
Safety Precautions and Conditions of Use
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance with
the FCC RF emission guidelines. SAR information on this model
phone is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid after searching on FCC
ID APYHRO00041.
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications & Internet Association
(CTIA) web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram
of tissue. The standard incorporates a substantial margin of safety
to give additional protection for the public and to account for any
variations in measurements.
Specifications and Optional Accessories
Specifications
Weight:
Dimensions (W × H × D):
Battery:
Approximately 148 g (with battery)
Approximately 50.0 × 108.7 × 28.5
mm (when closed, without protruding
parts)
Lithium-Ion, 3.7 V, 900 mAh
Optional Accessories
• Lithium-Ion Battery (XN-1BT70)
• Cigarette Lighter Charger (XN-1CL30)
• USB Data Cable (XN-1DC30)
• AC Charger (XN-1QC30, XN-1QC31)
• External Antenna Cable (XN-1AT90)
• Audio Remote-Controller (XN-1AR90)
• Car Holder (XN-1CH91)
• Desktop Holder (XN-1DH91)
• Stereo Headset (XN-1HS90)
• Handsfree Microphone Unit (XN-1HU90)
• Video Cable (XN-1VC90)
The above accessories may not be available in all regions.
For details, please contact your dealer.
Specifications and Optional Accessories
129
Index
A
Alarms 83
Area Info 59
B
Battery 11
Battery Level Indicator 13
Bluetooth Wireless Function 111
C
Calculator 84
Calendar 80
Call Costs 110
Call Log 109
Call Settings 102
Call Timers 109
Camera (photo/video) 41
Adjusting the Exposure 43
Common Shortcut Keys 45
Continuous Shoot 46
Focus Setting 44
Recording Video Clips 42
Selecting the Picture or Video Quality 44
Selecting the Picture Size 45
Selecting the Recording Time and
Size 47
Selecting the Scene 46
Selecting the Shutter Sound 47
Switching between the Photo and Video
Camera Modes 44
Taking Pictures 41
130
Index
Cell Broadcasts 58
Characters 29
Changing the Input Mode 30
Using Templates 31
Connectivity 111
Bluetooth 111
Flight Mode 115
Infrared 113
Internet Settings 115
Network Settings 114
Contacts List 34
Contact Groups 38
Manage Category 37
Memory Status 39
Selecting the Storage Memory 34
Speed Dial List 39
Synchronising Contacts List Entries with
those on the Internet 40
Viewing My Contact Details 35
Contacts Lock 108
Countdown Timer 90
D
Data Counter 109
Date & Time 100
Display Position 17
Display Settings 97
E
Earpiece Volume 22
E-Book 87
Emergency Calls 20
Expenses Memo 90
F
Function Lock 108
G
Games & Applications 72
Java™ Information 76
Setting Permission 73
Switching the Screensaver On or Off 75
Viewing Application Information 74
H
Handset Code 108
Handset Lock 107
I
In Call Menu (Video Call) 26
Changing the Image of Yourself 26
Muting the Microphone 26
Swapping Images 26
Turning the Speakers On and Off 27
Using the Optical Zoom Function 27
Video Call Settings 27
In Call Menu (Voice Call) 22
Accessing SMS/MMS Menu during a
Call 23
Conference Call 23
Muting the Microphone 24
Putting a Call on Hold 23
Turning the Speakers On and Off 22
International Calls 20
Internet Settings 115
K
O
V
Organiser & Tools 80
Other Documents 67
Video Call Settings 27
Video Clips 67
Vodafone live! 60
Voice Recorder 85
Keypad Lock 15
P
L
PC Connection 118
Phone Help 91
Pictures 65
PIN Code 107
PIN2 Code 107
Power On and Off 15
Profiles 93
Language Setting 101
M
Master Reset 108
Memory Card 116
Messaging (SMS/MMS/Email) 49
Calling the Phone Number 53
Downloading 53
Email Settings 58
Forwarding 54
General Settings 56
Locking or Unlocking 54
MMS Settings 57
Sending a Message in the Drafts Box 52
Sending a Voice Clip Message or Video
Clip Message 52
Sending with Postcard 54
SMS Settings 57
Storing the Phone Number 53
Using the Sending Options 51
Music Player 63
My Items 65
N
Navigating Functions 19
Network Settings 114
W
WAP Browser 61
World Clock 90
R
Redialling 21
S
Safety Precautions 122
Scanner 86
Screensavers 75
Secret Data 108
Security 107
Settings 93
SIM Application 92
SIM Card 11
Sound Settings 100
Sounds & Ringtones 66
Speed Dialling 21
Stopwatch 88
T
Tasks 88
Text Templates 71
Troubleshooting 120
Index
131
List of Menu Functions
Menu No./Main Menu
1
2
Entertainment
Vodafone live!
3
Music
4
Messaging
Menu No./Sub Menu1
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
2
3
1
2
3
4
5
6
7
8
9
10
Games & Applications
TV & Video
Vodafone live!
Enter URL
Bookmarks
Alert Inbox
My Saved Page
Access History
Browser Settings
What’s New?
Music*
Games
Ringtones
Pictures
News
Sport
Last Played Music/Currently Playing
My Music
Browse Music Store*
Create Message
Inbox
Drafts
Sent
Outbox
Vodafone Messenger
Templates
Media Album*
Messaging Settings
Memory Status
*This menu is not available with some service providers.
132
List of Menu Functions
Menu No./Main Menu
5
Menu No./Sub Menu1
Camera
6
My Items
7
Organiser & Tools
8
Contacts
1
2
3
4
5
6
7
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
Pictures
Sounds & Ringtones
Games & Applications
Videos
Text Templates
Other Documents
Memory Status
Calendar
Alarms
Calculator
Voice Recorder
Scanner
E-Book
Stopwatch
Tasks
World Clock
Countdown Timer
Expenses Memo
Phone Help
Contacts List
Call Voicemail
Manage Category
Speed Dial List
My Contact Details
Contact Groups
Synchronise
Settings
Manage Contacts
Menu No./Main Menu
9
Call Log
10 Connectivity
Menu No./Sub Menu1
1
2
3
4
5
6
7
1
2
3
4
5
6
All Calls
Dialled Numbers
Missed Calls
Received Calls
Call Timers
Data Counter
Call Costs**
Bluetooth
Infrared
Network Settings
Flight Mode
Internet Settings
Memory Card
1
2
3
4
5
6
7
8
9
Profiles
Display Settings
Sound Settings
Date & Time
Language
Call Settings
Video Call Settings
Security
Master Reset
11 SIM Application
12 Settings
Note for the menu indications for the Postcard, Media Album
and other services
• The menu indications for the Postcard, Media Album and other
services vary in the United Kingdom and Ireland as follows:
Current indications
in the user guide
Indications in
United Kingdom
Indications in
Ireland
“Postcard”
“Additional Information”
“Street & Number”
“State/Province”
“Postal Code”
“Media Album”
“To Media Album”
“What’s New?”
“live! Postcard”
“Additional information”
“Address”
“County”
“Post Code”
“live! Studio”
“To live! Studio”
“New”
(Not available)
“Additional Information”
“Street & Number”
“State/Province”
“Postal Code”
“Picture Album”
“To Picture Album”
“New”
**Depends on SIM card contents.
List of Menu Functions
133