* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
TRI BAND
GPRS TELEPHONE
SGH-V200C
ELECTRONICS
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-03570A
English. 02/2003. Rev. 1.0
Contents
Important Safety Precautions ...................... 7
Unpacking .................................................... 9
Your Phone ................................................ 10
Phone Layout .................................................... 10
Display............................................................. 13
Service Light..................................................... 16
Getting Started .......................................... 17
Installing the SIM Card....................................... 17
Charging a Battery ............................................ 19
Switching the Phone On/Off ................................ 23
Call Functions ............................................ 24
Making a Call ....................................................
Adjusting the Volume .........................................
Answering a Call................................................
Viewing Missed Calls ..........................................
Quickly Switching to the Silent mode....................
24
26
27
28
30
Selecting Functions and Options ................ 31
Example: Setting the Display Language ................ 33
Phonebook ................................................. 35
Storing a Number with a Name............................
Using Phonebook Entry Options ...........................
Searching for a Number in the Phonebook.............
Editing a Caller Group ........................................
Speed-Dialling...................................................
Checking the Memory Status...............................
35
37
39
41
42
43
Entering Text ............................................. 44
Changing the Text Input Mode ............................
Using the T9 Mode .............................................
Using the Upper/Lower-Case
Character Mode .................................................
Using the Symbol Mode ......................................
Using the Number Mode .....................................
2
45
46
47
49
49
3
Contents
Contents
Options During a Call ................................. 50
Sound Settings........................................... 78
Putting a Call on Hold.........................................
Switching the Microphone Off (Mute)....................
Muting/Sending Key Tones..................................
Searching for a Number in the Phonebook.............
Using the SMS Service .......................................
Answering a Second Call.....................................
Making a Multiparty Call .....................................
Ring Tone (Menu 4.1) ...........................................
Ring Volume (Menu 4.2) .......................................
Alert Type (Menu 4.3)...........................................
Keypad Tone (Menu 4.4).......................................
Message Tone (Menu 4.5) .....................................
Folder Tone (Menu 4.6) ........................................
Power On/Off (Menu 4.7) ......................................
Extra Tones (Menu 4.8) ........................................
50
51
52
52
53
53
53
78
78
79
79
80
81
81
81
Using the Menus......................................... 56
Accessing Menu Functions by Scrolling ................. 56
Accessing Menu Functions by Using Shortcuts ....... 57
List of Menu Functions........................................ 57
Messages ................................................... 62
Inbox (Menu 1.1) .................................................
Outbox (Menu 1.2) ...............................................
Write New (Menu 1.3) ...........................................
Templates (Menu 1.4) ..........................................
Settings (Menu 1.5)..............................................
My Objects (Menu 1.6) .........................................
Memory Status (Menu 1.7) ...................................
Voice Mail (Menu 1.8) ...........................................
Broadcast (Menu 1.9) ...........................................
62
63
65
67
68
69
70
70
71
Call Records ............................................... 73
Missed Calls (Menu 2.1) ........................................
Received Calls (Menu 2.2).....................................
Dialled Calls (Menu 2.3)........................................
Delete All (Menu 2.4)............................................
Call Time (Menu 2.5) ............................................
Call Cost (Menu 2.6).............................................
73
73
74
74
74
75
Camera ...................................................... 76
New Photo (Menu 3.1) .......................................... 76
My Photos (Menu 3.2)........................................... 77
4
Phone Settings........................................... 83
Infrared Activate (Menu 5.1) .................................
My Settings (Menu 5.2) ........................................
Greeting Message (Menu 5.3) ...............................
Own Number (Menu 5.4) ......................................
Language (Menu 5.5) ...........................................
Security (Menu 5.6)..............................................
Display Settings (Menu 5.7) .................................
Extra Settings (Menu 5.8) .....................................
Short Cut (Menu 5.9)............................................
Reset Settings (Menu 5.10)...................................
83
84
85
85
86
86
89
91
92
92
Organiser ................................................... 93
Calendar (Menu 6.1)............................................. 93
To Do List (Menu 6.2) ........................................... 95
Time & Date (Menu 6.3) ....................................... 98
Alarm (Menu 6.4) ................................................. 99
Calculator (Menu 6.5) .......................................... 100
Currency Exchange (Menu 6.6) ............................ 101
Network Services ..................................... 102
Call Diverting (Menu 7.1) .....................................
Call Barring (Menu 7.2) .......................................
Call Waiting (Menu 7.3) .......................................
Network Selection (Menu 7.4) ..............................
Caller ID (Menu 7.5)............................................
Closed User Group (CUG) (Menu 7.6) ...................
Band Selection (Menu 7.7) ...................................
102
104
106
107
108
108
110
5
Contents
Funbox ..................................................... 111
Games (Menu 8.1) .............................................. 111
WAP Browser (Menu 8.2) ..................................... 112
Downloads (Menu 8.3)......................................... 119
Solving Problems ..................................... 120
Access Codes ........................................... 123
Phone Password ...............................................
PIN.................................................................
PUK ................................................................
PIN2 ...............................................................
PUK2 ..............................................................
123
124
124
125
125
Health and Safety Information ................. 126
Exposure to Radio-Frequency
Energy (SAR Information)..................................
Precautions When Using Batteries .......................
Road Safety .....................................................
Operating Environment .....................................
Potentially Explosive Atmospheres ......................
Emergency Calls...............................................
Other Important Safety Information ....................
Care and Maintenance .......................................
126
128
130
132
134
135
136
137
Glossary ................................................... 139
Index ....................................................... 143
Quick Reference Card ............................... 147
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal. For more detailed safety
information, see “Health and Safety Information”
on page 126.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refueling
Do not use the phone at a refueling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Unpacking
Radio Frequency Exposure
The design of this phone complies with FCC (of the
U.S. Government) requirements relating to radio
frequency (RF) exposure. To maintain compliance
with these requirements, use only Samsungsupplied or approved accessories. Use of nonapproved accessories may violate the
requirements.
Your package contains the following items.
Handset
Travel Adapter
Batteries
Battery Charger
Sensible Use
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Qualified Service
Only qualified service personnel may install or
repair your phone.
Ear-microphone
Software CD-ROM
Data Cable
User’s Manuals
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
8
•
•
•
•
•
Ear-microphone
Simple hands-free kit
Standard/slim batteries
Cigarette lighter adapter
Holster
9
Your Phone
Your Phone
Key
Phone Layout
In the menu mode, scroll through the
menu options and Phonebook memory.
The following illustrations show the main elements
of your phone.
In the idle mode, allow you to access
your favourite menu options directly;
for more information on shortcuts, see
page 92.
Earpiece
Folder
Description
In the menu mode, return to the
previous menu level and select the
current menu respectively.
Display
When entering text, move the cursor
left and right respectively.
In the idle mode, allow you to access
your favourite menu options directly;
for more information on shortcuts, see
page 92.
Navigation
keys
Camera key
Soft key (right)
Soft key (left)
WAP Browser
key
Ear-microphone
jack
Dial/menu
confirmation key
Volume/menu
browse keys
Cancel/
correction key
IrDA port
Power on/off /
menu exit key
Alphanumeric
keys
Microphone
Special
function keys
Antenna
(soft keys)
Perform the functions indicated by the
text above them (on the bottom line of
the display).
In the idle mode, quickly accesses the
Camera menu to allow you to use the
camera on your phone.
In the idle mode, quickly launches the
WAP (Wireless Application Protocol)
browser.
Camera module
Deletes characters from the display.
External display
Service light
10
In the menu mode, returns to the
previous menu level.
11
Your Phone
Key
Your Phone
Description (continued)
Display
Makes or answers a call.
When held down in the idle mode,
recalls the last number dialled or
received.
Display Layout
The display has three areas.
In the menu mode, selects a menu
function or stores information that you
have entered (such as a name) in the
phone or SIM memory.
Icons area
Text and
graphic area
Ends a call. Also switches the phone on
and off when held down.
In the menu mode, cancels your input
and returns to the idle mode.
When held down in the idle mode,
quickly accesses your voice mail.
Enter numbers, letters and some
special characters.
Menu
Soft keys
indication area
Area
Description
First line
Displays various icons (see
page 14).
Middle lines
Display messages, instructions
and any information that you
enter (number to be dialled, for
example).
Last line
Shows the functions currently
assigned to the two soft keys.
Enter special characters.
Perform various functions.
Name
(on the side of the phone)
During a call, adjust the earpiece
volume.
In the idle mode, adjust the key
volume.
In the menu mode, scroll through the
menu options and Phonebook memory.
12
13
Your Phone
Icons
Icon
Your Phone
Icon
Description
Shows the received signal strength. The
greater the number of bars, the better the
signal.
Appears when a call is in progress.
Appears when the silent mode is active or
you set the Alert Type menu option
(Menu 4.3), so that the phone vibrates
when you receive a call; for further
details, see page 79.
Appears when a new text message is
received.
Appears when a new voice mail message
is received.
Appears to indicate the current text input
mode when you are entering text.
Description
Appears when the mute mode is active.
Appears when you are connected to the
GPRS network.
Appears when you are out of your home
area and have registered with a different
network; for example, when travelling in
other countries.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or open the folder, the
backlight turns on and lights for a given period of
time, depending on the Back Light menu option.
Then it dims and finally turns off after one minute.
Appears when you set an alarm.
To specify the length of time for which the backlight
is active, set the Back Light menu option (Menu
5.7.2); see page 89 for further details.
Shows the level of your battery. The more
bars you see, the more power you have
left.
You can also set the phone to use the backlight only
during a specified period of time, in the Auto Light
menu option (Menu 5.7.3); see page 89 for
further details.
Appears when the IrDA port is active. For
details, see page 83.
External Display
Your phone has an external display on the cover. It
indicates that you have an incoming call or a
message, and notifies you when you set an alarm at
the specified time.
14
15
Your Phone
Getting Started
Service Light
The service light is below the external display on
the folder cover. It flashes when services are
available on the phone.
To activate or deactivate use of the service light, set
the Service Light menu option (Menu 5.7.4);
see page 90 for further details.
Installing the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available and many others.
Important! The plug-in SIM card and its contacts
can be easily damaged by scratches
or bending, so be careful when
handling, inserting or removing the
card.
Keep all SIM cards out of the reach of
small children.
Service light
1. If necessary, switch off the phone by holding
down the
key until the power-off image is
displayed.
2. Remove the battery. To do so:
➀ Press the catch above the battery and hold it
in that position.
➁ Slide the battery and lift it away, as shown.
16
17
Getting Started
Getting Started
3. Slide the SIM card into the SIM card holder so
that the holder locks the card in position.
Make sure that the notched corner is top left and
the gold contacts of the card face into the
phone.
5. Slide the battery towards the top of the phone
until it clicks into place. Make sure that the
battery is properly installed before switching on
the power.
Note: When you need to remove the SIM card, slide
it, as shown, and take it out of the holder.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter and battery charger are
provided with your phone. Use only approved
batteries and chargers. Ask your local Samsung
dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
200 minutes.
4. Place the battery back, taking care to match the
tabs on the battery with the grooves on the
phone.
Using the Battery Charger
Using the battery charger, you can charge the
battery alone.
18
19
Getting Started
1. Insert the battery into the charger, ensuring that
the terminals on the battery are in contact with
those on the charger. Press the battery down
until it clicks into place.
Getting Started
4. When charging is finished, unplug the adapter
from both the power outlet and the charger.
5. Take the battery out of the charger.
2. Plug the connector of the travel adapter into the
jack at the bottom of the charger.
Using the Travel Adapter
The travel adapter allows you to use the phone
while the battery is charging, but this will cause the
phone to charge more slowly.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the
bottom of the phone.
3. Plug the adapter into a standard AC wall outlet.
The LED on the charger will indicate the
charging progress with the following colours:
• Red: the battery is charging.
• Green: the battery is completely charged.
2. Plug the adapter into a standard AC wall outlet.
• Yellow: the battery is not correctly plugged in
or operating in a too high or too low
temperature.
20
21
Getting Started
Getting Started
3. When charging is finished, unplug the adapter
from the power outlet and from the phone by
pressing the gray tabs on both sides of the
connector and pulling the connector out.
Switching the Phone On/Off
1. Open the folder.
2. Hold down the
switches on.
key until the phone
3. If the phone asks for a password, enter the
password and press the OK soft key. The phone
password is factory set to “00000000.” For
further details, see page 123.
Note: Do not remove the battery from the phone
without unplugging the adapter while it is
charging. If you do this, the phone may be
damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and
a message will be repeated at regular intervals on
the display:
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 124.
The phone searches for your network and when
it finds the network, the idle screen, illustrated
below, appears on each display. Now, you can
make or receive a call.
Service Provider
05:17
Sat 02 Oct
05:17
Sat/02
**Warning**
Low Battery
Menu
Menu
Name
When the battery becomes too weak for the phone
to operate, it switches off automatically.
22
Name
Note: The display language is preset to English at the
factory. To change the language, use the
Language menu option (Menu 5.5); for
further details, refer to page 86.
5. When you wish to switch the phone off, hold
down the
key until the power-off image is
displayed.
23
Call Functions
Call Functions
Ending a Call
Making a Call
When you want to finish your call, briefly press the
key.
When the idle screen displays, enter the area code
and phone number, and press the
key.
Redialling the Last Number
Note: If you have checked the Auto Redial option
in the Extra Settings menu (Menu 5.8),
the number is redialled automatically up to ten
times when the person does not answer the
call or is already on the phone; see page 91 for
further details.
Making an International Call
1. Press and hold the
key.
The + character appears.
2. Enter the country code, area code and phone
number and press the
key.
Correcting the Number
To clear
the last digit
displayed
Press the
key.
any other digit
in the number
or key until the cursor is
immediately to the right of the
digit to be cleared. Press the
key. You can also insert a
missing digit simply by pressing
the appropriate key.
the whole
display
key for more than one
second.
24
The phone stores the numbers you dialled, received
or missed if the callers are identified; see “Call
Records” on page 73 for further details.
To recall any of these numbers:
1. If you have typed any characters on the display,
clear the display by holding down the
key for
more than one second.
2. Press the
key to display a list of the last
numbers in the order in which the calls were
made.
3. Use the
and
keys to scroll through the
numbers until the required number highlights.
4. To
dial the number
highlighted
edit the number
highlighted
Press the
key.
Edit soft key and change
the number as required,
referring to “Correcting
the Number” on page 24
for further details.
25
Call Functions
Call Functions
Making a Call from the Phonebook
You can store frequently phone numbers that you
use regularly in the SIM card or the phone’s
memory, which are collectively called the
Phonebook. Simply select the required name to
recall the associated number. For further details on
the Phonebook features, refer to page 35.
Answering a Call
When somebody calls you, the phone rings and the
following screen appears on each display.
nnnnnnn
nnnnnnn
Adjusting the Volume
During a call, if you want to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Press the
key to increase and the
decrease the volume.
key to
Accept
Reject
If the caller can be identified, the caller’s phone
number or name, if stored in your Phonebook,
displays.
1. If necessary, open the folder. Press the
key
or the Accept soft key to answer the incoming
call.
If the Anykey Answer option in the Extra
Settings menu (Menu 5.8) is checked, you
can press any key to answer a call except for
the
key and the Reject soft key (see
page 91).
If the Active Folder option in the Extra
Settings menu (Menu 5.8) is checked, you
can answer the call simply by opening the folder
(see page 91).
In the idle mode with the folder open, you can
adjust the key volume using these keys.
Note: To reject an incoming call, press and hold
the volume keys on the left side of the
phone before opening the folder.
2. End the call by closing the folder or pressing
the
key.
Note: You can answer a call while using the
Phonebook or menu features.
26
27
Call Functions
Call Functions
Viewing Missed Calls
3. Press the Select soft key.
If you are unable to answer a call for any reason,
you can find out who called you, provided that this
service is available, so that you can call the person
back, if necessary.
4. Change the number as required.
5. To
Press the
call the number
The number of missed calls is displayed on the idle
screen immediately after a call was missed.
store the number
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
Press the
scroll through the
missed calls
or
call the number
displayed
key.
edit or delete a missed
call number
Save soft key and enter
the name and location
required (for further
details, refer to page 35).
Deleting a Missed Call
The number corresponding to the most recent
missed call displays, if available.
3. To
key.
key.
Select soft key (see
below).
Editing a Missed Call Number
1. Press the Options soft key.
2. If necessary, press the
the Delete option.
or
key to highlight
3. Press the Select soft key.
You can press the
Missed Call feature.
key at any time to exit the
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu
option (Menu 2.1); for further details, see
page 73.
Note: If the number corresponding to the missed call
is not available, the Edit Number option is
not displayed.
1. Press the Options soft key.
2. Press the
or
Number option.
28
key to highlight the Edit
29
Call Functions
Quickly Switching to the Silent mode
The silent mode is convenient when discretion is
required and you wish to stop the phone from
making any noise, in a theatre for example.
In the idle mode, to switch your phone quickly to
the silent mode, simply press and hold the
key
until the “Silent Mode” message and vibration icon
( ) are displayed.
Selecting Functions
and Options
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and
. Each menu
and sub-menu allows you to view and alter the
settings of a particular function.
In the silent mode, your phone changes the sound
settings as follows.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current
role.
Option
Example:
New Setting
Alert Type (Menu 4.3)
Vibration
Keypad Tone (Menu 4.4)
OFF
SMS Tone (Menu 4.5.1)
Light Only
To exit the silent mode and reactivate the previous
sound settings, press and hold the
key again
until “Exit Silent Mode” appears. The vibration icon
( ) is no longer displayed.
Service Provider
05:17
Sat 02 Oct
Menu
Press the left soft
key to access the
main menu mode.
30
Name
Press the right soft
key to access the
Phonebook feature.
31
Selecting Functions and Options
Selecting Functions and Options
To view the various functions/options available and
select the one required:
Example: Setting the Display
Language
1. Press the appropriate soft key.
2. To
Press the
select the:
• function displayed
or
• option highlighted
Select soft key or
the key.
view the next function
or highlight the next
option in a list
key or
key on
the left side of the
phone.
move back to the
previous function or
option in a list
key or
key on
the left side of the
phone.
move back up one level
in the structure
exit the structure
without changing the
settings
1. When the idle screen is displayed, press the
Menu soft key to access the menus.
Service Provider
05:17
Sat 20 Oct
Menu
Name
2. Scroll through the menus until you reach the
Phone Settings menu, by pressing the
or
key.
key,
soft key or
key.
Sound Settings
key.
Organiser
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the OK soft key.
Select
5
3. To select the Phone Settings menu, press the
Select soft key or the key.
Phone Settings
Infrared Activ..
My Settings
If the menu name is too long
for the display, it is scrolled
when highlighted.
Greeting Me...
Own Number
Language
Security
Select
32
5.1
33
Selecting Functions and Options
Phonebook
4. Scroll through the sub-menus until you reach
the Language sub-menu, by pressing the
or
key.
Phone Settings
Infrared Activ..
My Settings
Greeting Me...
Own N English
Language
Shows the current
setting
Security
5.5
Select
You can store phone numbers and their
corresponding names in the memory of your SIM
card. In addition, you can store up to 500 numbers
in the phone memory. The SIM card and phone
memories, although physically separate, are used
as a single entity, called the Phonebook.
Storing a Number with a Name
There are two ways to store a number:
5. To view the languages available, press the
Select soft key or the key.
The current setting highlights.
Language
• Using the Save soft key in the idle mode
• Using the New Entry option in the Phonebook
menu
Storing a Number in Idle mode
English
Current language
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the Phonebook.
Français
Automatic
1. Enter the number to be stored.
Select
5.5.1
6. Scroll through the list of languages until the
appropriate one highlights, by pressing the
or
key.
7. Press the Select soft key or the
confirm your selection.
8. Press the
structure.
34
or
key to
key twice to exit the menu
Note: If you make a mistake while entering a
number, correct it using the
key. For
further details, refer to page 24.
2. When you are sure that it is correct, press the
Save soft key.
3. Select an icon to identify the category of number
to be stored. Three categories are available;
(mobile phone number),
(office number)
and
(home number). To select the category,
press the or key, followed by the Select soft
key.
35
Phonebook
Phonebook
4. Enter a name and press the OK soft key.
2. Scroll to New Entry by pressing the
key and press the Select soft key.
or
The maximum length of a name depends on
your SIM card. For information on how to enter
characters, see page 44.
3. Select an icon to identify the category of the
number to be stored.
5. Press the right soft key, labelled To Card or To
Phone to switch between the phone and card
memories.
Note: The E-mail icon ( ) is available in this
step. It allows you to save an E-mail
address instead of a phone number.
Note: If you change phones, any numbers stored
in your SIM card memory will automatically
be available with the new phone, whereas
any numbers stored in the phone memory
must be restored.
6. If you do not want to save the number and
name in the suggested location, press the
key to clear the location number and enter your
preferred location by pressing the number keys.
7. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phonebook
entry or name just created.
8. To
use the entry options
return to the idle
screen
Using Phonebook Entry Options
While accessing any Phonebook entry, press the
Options soft key to use the options for the entry.
To
Press the
select the
highlighted option
Select soft key or the
key.
highlight a different
option
or
key until the
required option highlights.
Press the
Options soft key.
key.
Storing a Number Using the Phonebook
Menu
1. When the idle screen displays, press the Name
soft key.
36
4. Continue the procedure from Step 4 on page 36
to store the number.
The following options are available:
Paste: allows you to paste the selected number
into normal dialling mode.
Use this option to dial a number similar to one in
the Phonebook, a different extension in the same
office, for example.
Use the
key to change the number as required;
refer to page 24 for further details. When you are
ready to dial, press the
key.
37
Phonebook
Edit: allows you to edit the Phonebook entry.
Select One Entry to change one number in the
selected name. If you change the name, the
number is saved separately. Select All Entry to
change the name of the entry.
Erase: allows you to erase the selected name and
number from the Phonebook. You are asked to
confirm that you wish to erase the name and
number by pressing the Yes soft key.
Copy: allows you to copy the selected number to
another location. Use this option to store a number
similar to one already in the memory; once copied,
edit the number and store it in the Phonebook.
Caller Group: allows you to assign the entry to a
caller group so that the phone alerts you in a
particular way when the corresponding person calls
you. Select one of the ten groups available.
To remove an entry from a group, select the No
Group option.
For more information on how to change caller group
properties, see page 41.
Add Entry: allows you to add a new number in
a different category (mobile, office, home or
E-mail) to the currently selected name.
Phonebook
Searching for a Number in the
Phonebook
After storing numbers in the Phonebook, you can
search for them in two ways; by name and by caller
group.
Searching for a Number by Name
1. When the idle screen displays, press the Name
soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
3. Enter the first few letters of the name that you
wish to find.
The Phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
4. To
Press the
view the highlighted
entry
View soft key.
select a different
entry
or
key until the
required entry
highlights.
look for a name
starting with a
different letter
key labelled with the
required letter.
5. Once you have found the required entry, press
the
key to dial the number, or press the
Options soft key to access the Phonebook
entry options; for further details, see page 37.
38
39
Phonebook
Phonebook
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name
soft key.
Editing a Caller Group
1. When the idle screen displays, press the Name
soft key.
or
2. Scroll to Group Search by pressing the
key and press the Select soft key. You are
asked to enter a group name.
2. Scroll to Group Edit by pressing the
key and press the Select soft key.
3. Enter the first few letters of the group name that
you wish to find.
3. Enter the first few letters of the required group
name or scroll through the group list by pressing
the
or
key.
The caller groups are listed, starting with the
first group matching your input. The group is
also highlighted.
or
4. When the group you want to edit highlights,
press the Options soft key.
4. Scroll to the required group by pressing the
or
key and press the View soft key.
5. Select each option and change the settings, as
required. The following options are available:
The Phonebook entries in the selected caller
group are listed.
• Call ring tone: allows you to select the ring
tone to be used when you receive a voice call
from a person in the group.
5. To...
Press the...
view the
highlighted entry
View soft key.
select a different
entry
or
key until the
required entry highlights.
6. Once you have found the required entry, press
the
key to dial the number, or press the
Options soft key to access the Phonebook
entry options; for further details, see page 37.
40
• SMS tone: allows you to select the ring tone
to be used when you receive a text message
from a person in the group.
• Graphic: allows you to select the graphic icon
to be displayed when you receive a voice call
from a person in the group.
• Group Name: allows you to assign a name to
the group; for further details on how to enter
characters, see page 44.
6. When you finish changing the settings, press the
or
key.
41
Phonebook
Phonebook
Speed-Dialling
Once you have stored phone numbers in the SIM
card, you can set up to eight speed-dial entries and
then dial them easily whenever you want, simply by
pressing the associated number key.
• Number: allows you to view the number
assigned to the key.
7. When you have finish setting the option, press
the
or
key.
Setting Up Speed-Dial Entries
1. When the idle screen displays, press the Name
soft key.
2. Scroll to Speed Dial by pressing the
key and press the Select soft key.
• Erase All: allows you to clear the settings for
all keys so that no numbers are assigned to
any of the keys.
or
3. Select the key,
to
, to which you wish to
assign the speed-dialling feature, and press the
OK soft key.
Note: If you have already assigned a number to
the key, the Options soft key replaces the
OK soft key. Go to Step 6.
4. Select the required Phonebook entry from the
list and press the View soft key.
5. Select the required number if the entry has
more than one number, by pressing the
or
key and press the Select soft key.
6. Once you have assigned a number to the
selected key, The following options are
available:
Speed-Dialling from the Phonebook
To speed-dial the numbers assigned to keys
, press and hold the appropriate key.
to
Note: Memory location 1 is reserved for your Voice
Mail server number.
Checking the Memory Status
You can check how many names and numbers are
stored in the Phonebook; SIM card and phone
memories. You can also see the capacity of both
memories.
1. When the idle screen displays, press the Name
soft key.
2. Select the Memory Status option.
3. Press the
or
key to view the number of
existing and remaining entries in the card and
phone memories.
• Change: allows you to assign a different
number to the key.
• Erase: allows you to clear the setting so that
no number is assigned to the key.
42
43
Entering Text
Entering Text
Changing the Text Input Mode
When using your phone, you will often need to
enter text. For example, when storing a name in the
Phonebook, creating your personal greeting or
scheduling events in your calendar. You can enter
alphanumeric characters by using your phone’s
keypad.
When you are in a field that allows characters to be
entered, you will notice the text input mode
indicator on the display.
Example: When you create a text message
Your phone has the following text input modes:
Text input mode
indicator
• T9 mode
This mode allows you to enter words with only
one keystroke per letter. Each key on the keypad
has more than one letter – when you press the
key once, J, K or L may be displayed. The T9
mode automatically compares your keystrokes
with an internal linguistic dictionary to determine
the correct word, thus requiring far fewer
keystrokes than the traditional upper/lower-case
character modes.
• Upper/lower-case character modes
These modes allow you to enter letters by
pressing the key labeled with the required letter
once, twice, three or four times until the letter
displays.
• Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
• Number mode
This mode allows you to enter numbers.
44
Options
918
To select the...
Press the
until...
T9 mode
displays.
See page 46.
Upper-case character
mode
A displays.
See page 47.
Lower-case character
mode
a displays.
See page 47.
Number mode
1 displays.
See page 49.
Symbol mode
displays.
See page 49.
soft key
45
Entering Text
Entering Text
Using the T9 Mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input mode is based on a built-in dictionary.
1. When you are in T9 predictive text input mode,
start entering a word by pressing keys
to
. Press each key only once for one letter.
• To enter full stops, hyphens or apostrophes, press
the
key. The T9 mode applies grammar rules
to ensure that the correct punctuation is used.
Example:
L
is used twice to display two
punctuation marks:
e
t
’
s
e
a
t
.
Example: to enter Hello in T9 mode,
press
,
,
,
and
.
The word that you are typing appears on the
display. It may change with each key that you
press.
2. Enter the whole word before editing or deleting
the keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press the
,
or
key to
display alternative word choices for the keys
that you have pressed.
Example: both Of and Me have the sequence
,
. The phone displays the most
commonly used choice first.
4. Put a space between each word by pressing the
key.
• To shift the case in T9 mode, use the
key.
There are three cases: Lower Case ( ), Initial
Capital ( ) and Capital Lock ( ).
• You can move the cursor by using the and
keys. To delete letters, press the
key. Press
and hold the
key to clear the display.
Using the Upper/Lower-Case
Character Mode
Use the
to
keys to enter your text.
1. Press the key labeled with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move
right automatically, and then select the next
letter.
46
47
Entering Text
Entering Text
Refer to the table below for more information about
the characters available.
Key
Characters in the Order Displayed
Upper Case
1
Using the Symbol Mode
The Symbol mode enables you to insert symbols in
a text message.
Lower Case
Space
2
3
4
5
6
OK
7
8
Use the navigation keys to scroll to the desired
symbol and then press OK soft key to insert the
highlighted symbol into your message.
9
0
• To insert a space, press the
key.
• You can move the cursor by using the and
keys. To delete letters, press the
key. Press
and hold down the
key to clear the display.
48
918
Using the Number Mode
The Number mode enables you to enter numbers in
a text message. Press the keys corresponding to
the required digits, and manually switching back to
the text input mode of choice.
49
Options During a Call
Options During a Call
Switching the Microphone Off (Mute)
Your phone provides a number of control functions
that you can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want,
by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or
look it up in the Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or alternatively:
1. Put the current call on hold by pressing the
Hold soft key.
You can temporarily switch your phone’s
microphone off, so that the other party cannot hear
you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the
Mute option.
key to highlight the
3. Press the OK soft key.
The other party can no longer hear you.
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the
Unmute option.
key to highlight the
3. Press the OK soft key.
The other party can hear you again.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
50
51
Options During a Call
Options During a Call
Muting/Sending Key Tones
Using the SMS Service
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your
phone does not transmit the key tones. It allows
you to press keys without hearing annoying key
tones during a call.
If you receive an SMS (Short Message Service)
message during a call, the message icon (
)
flashes on the display. The Messages option
enables you to use this feature.
Note: To communicate with answering machines or
computerized telephony systems, the Send
tones option must be selected.
For further details on the SMS service, refer to
page 62.
Answering a Second Call
Searching for a Number in the
Phonebook
You can search for a number in the Phonebook
during a call.
1. Press the Options soft key.
2. Press the
option.
key to highlight the Phonebook
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the
first entry matching your input. The entry also
highlights.
5. To view the highlighted entry, press the View
soft key.
For further details on the Phonebook feature, refer
to page 35.
52
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (Menu 7.3) to Activate (see page 106).
You will be notified of an incoming call by a call
waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the
Swap soft key.
To end a call on hold, press the Options soft
key and select the End Held Call option.
3. To end the current call, press the
key.
Making a Multiparty Call
A multiparty call is a network service that allows up
to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
53
Options During a Call
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Conference
option.
You can add incoming callers by answering the call
and pressing Options, followed by Conference.
Repeat as required.
Having a Private Conversation With One
Participant
Options During a Call
3. Select the Private option.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the
Options soft key and select Conference.
All of the multiparty call participants can now
hear each other.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
2. Highlight the required person, by pressing
the
or
key, followed by the Select soft
key or the
key.
3. Select Remove.
1. Press the Options soft key and choose the
Select one option.
The call is ended with that participant, but you
can continue to talk with the other participants.
The list of call participants appears.
2. Highlight the required person, by pressing
the
or
key, followed by the Select soft
key or the
key.
54
4. End the multiparty call by closing the folder or
pressing the
key.
55
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
The menus and sub-menus can be accessed by
scrolling with the navigation keys or by using the
shortcuts.
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access
menu mode.
2. Scroll with the
and
keys to reach the
required main menu, Phone Settings for
example. Press the Select soft key or the key
to enter the menu.
3. If the menu contains any sub-menus,
Language for example, you can access them
by scrolling with the
and
keys and
pressing the Select soft key.
If the menu that you have selected contains
further options, repeat the same procedure.
4. To
56
The menu items (menu, sub-menus and options)
are numbered and can be accessed quickly by using
their shortcut number. The shortcut number is
shown in the bottom right next to the
soft key on
the display. Simply press the Menu soft key and
key in the required number.
Note: The numbers assigned to each menu option are
indicated in the list on the next page. They
may not match the menu number on the
phone. It depends on the services supported
by the SIM card.
Example: Accessing the Language option.
1. Press the Menu soft key.
2. Press
for Phone Settings.
3. Press
for Language.
The languages available display directly.
List of Menu Functions
Press the
scroll through
the menus
key or use
the
and
keys on
the left side of the
phone.
confirm the
chosen setting
Select soft key or the
key.
return to the
previous menu level
soft key or the
key.
exit the menu without
changing the settings
Accessing Menu Functions by
Using Shortcuts
or
key.
The following illustration shows the menu structure
available and indicates the:
• number assigned to each option
• page on which you can find a description of each
feature
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu (9) is
displayed first when you press the Menu soft
key to enter menu mode. For further details,
refer to your SIM card manual.
57
Using the Menus
1. Messages
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
Using the Menus
(see page 62)
Inbox
Outbox
Write New
Templates
Settings
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Setting 3*
1.5.4 Common Setting
My Objects
1.6.1 My EMS Melody
1.6.2 My EMS Picture
1.6.3 My EMS Animation
1.6.4 Delete All
Memory Status
1.7.1 SIM memory
1.7.2 PHONE memory
1.7.3 CB memory
1.7.4 Delete all
Voice Mail
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
2. Call Records
2.1
2.2
2.3
2.4
(see page 73)
Missed Calls
Received Calls
Dialled Calls
Delete All
2.4.1 Missed Calls
2.4.2 Received Calls
2.4.3 Dialled Calls
* Shown only if supported by your SIM card.
58
2. Call Records
(continued)
2.5 Call Time
2.5.1 Last Call Time
2.5.2 Total Sent
2.5.3 Total Received
2.5.4 Reset Timers
2.6 Call Cost*
2.6.1 Last Call Cost
2.6.2 Total Cost
2.6.3 Max Cost
2.6.4 Reset Counters
2.6.5 Set Max Cost
2.6.6 Price/Unit
3. Camera
(see page 76)
3.1 New Photo
3.2 My Photos
4. Sound Settings
(see page 78)
4.1
4.2
4.3
4.4
4.5
Ring Tone
Ring Volume
Alert Type
Keypad Tone
Message Tone
4.5.1 SMS Tone
4.5.2 SMS-CB Tone
4.6 Folder Tone
4.7 Power On/Off
4.8 Extra Tones
4.8.1 Error Tone
4.8.2 Minute Minder
4.8.3 Connect Tone
* Shown only if supported by your SIM card.
59
Using the Menus
Using the Menus
5. Phone Settings
(see page 83)
5.1 Infrared Activate
5.2 My Settings
5.2.1 Wallpaper
5.2.2 Menu Style
5.3 Greeting Message
5.4 Own Number
5.5 Language
5.6 Security
5.6.1 PIN Check
5.6.2 Change PIN
5.6.3 Phone Lock
5.6.4 Change Password
5.6.5 SIM Lock
5.6.6 FDN Mode*
5.6.7 Change PIN2*
5.7 Display Settings
5.7.1 Brightness
5.7.2 Back Light
5.7.3 Auto Light
5.7.4 Service Light
5.7.5 Graphic Logo
5.8 Extra Settings
5.8.1 Auto Redial
5.8.2 Active Folder
5.8.3 Anykey Answer
5.9 Short Cut
5.10 Reset Settings
6. Organiser
(see page 93)
6.1 Calendar
6.2 To Do List
6.3 Time & Date
6.3.1 Set Time
6.3.2 Set Date
6.3.3 World Time
6.3.4 Time Format
6.4 Alarm
6.5 Calculator
6.6 Currency Exchange
7. Network Services
(see page 102)
7.1 Call Diverting
7.1.1 Divert Always
7.1.2 Busy
7.1.3 No Reply
7.1.4 Unreachable
7.1.5 Cancel All
7.2 Call Barring
7.2.1 All Outgoing
7.2.2 International
7.2.3 International Except to Home
7.2.4 All Incoming
7.2.5 Incoming While Abroad
7.2.6 Cancel All
7.2.7 Change Barring Password
7.3 Call Waiting
7.3.1 Voice Calls
7.3.2 Data Calls
7.3.3 Cancel All
7.4 Network Selection
7.4.1 Automatic
7.4.2 Manual
7.5 Caller ID
7.5.1 Default
7.5.2 Hide Number
7.5.3 Send Number
7.6 Closed User Group
7.6.1 Index List
7.6.2 Outside Access
7.6.3 Default Group
7.7 Band Selection
8. Funbox
(see page 111)
8.1 Games
8.2 WAP Browser
8.3 Downloads
8.3.1 Sounds
8.3.1 Pictures
* Shown only if supported by your SIM card.
60
61
Messages
Messages
Delete: allows you to delete the message.
The SMS (Short Message Service) function is a
network service and may not be supported by your
network. Messages can be sent by text, fax, Email
and paging messaging systems, provided that these
services are supported by your network. To send
text messages by phone, you must obtain the
number of the SMS center from your service
provider.
Send: allows you to resend the message. For
further information on how to send a message, see
page 65.
Reply: allows you to reply to the sender by
sending a text message. You can also change the
SMS center number, if required.
Call Back: allows you to call the sender back.
When the message icon (
) appears, you have
received new text messages. If the memory is full,
an error message is displayed and you cannot
receive any new messages. Use the Delete option
in each message box to delete obsolete ones.
Cut Address: allows you to extract URL or
e-mail addresses or a phone numbers from the
message text, so that you can save them in your
phone’s memory.
Inbox
Move: allows you to move the message to another
memory location, from the SIM card memory to the
phone memory or vice versa.
(Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages in
the box displays with the senders’ phone numbers
or names, if available in your Phonebook.
Select Objects: allows you to save the media
items, such as sounds or images, from the message
into your phone’s memory. You can then use the
items when writing a message; for details, see
page 66.
1. Select a message from the list and press the
View soft key to read the message contents.
Outbox
2. To scroll through the contents, press the
key.
This message box is used to store the messages
that you have already sent or will send.
or
3. To scroll to the previous or next messages, press
the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft key.
(Menu 1.2)
When you enter this menu, the list of messages in
the box displays with the recipients’ phone numbers
or names, if available in your Phonebook.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the
key.
62
or
63
Messages
Messages
3. To scroll to the previous or next messages, press
the
or
key.
Write New
While reading a message, you can choose the
following options by pressing the Options soft key.
In this menu, you can write and send a text
message.
Delete: allows you to delete the message.
Send: allows you to resend the message. For
further information on how to send a message, see
page 65.
Cut Address: allows you to extract URL or
e-mail addresses or a phone numbers from the
message text, so that you can save them in your
phone’s memory.
Move: allows you to move the message to another
memory location, from the SIM memory to the
phone memory or vice versa.
Select Objects: allows you to save the media
items, such as sounds or images, from the message
into your phone’s memory. You can then use the
items when writing a message; for details, see
page 66.
(Menu 1.3)
Note: You can enter up to 918 alphanumeric
characters for your message. If you add media
items to the message, the number of
characters you can enter will be decreased.
Creating a Simple Text Message
1. Create your message.
Note: For more information about entering
characters, refer to page 44.
2. When you finish entering your message, press
the Options soft key. The following options are
available:
• Send: allows you to send the message. The
message will be deleted after sending.
• Save and Send: allows you to save a copy of
the message into the specified memory and
then send the message to the destination. You
can read the message in your Outbox
• Save: allows you to save the message into
the specified memory so that it can be sent
later. You can read the message in your
Outbox.
• For information about the Text Formatting,
Add Objects, Add Templates, Add
Phonebook, Add Bookmark and
Language options, see “Creating a Message
using the Options” on page 66.
64
65
Messages
3. Select Send or Save and Send, and press the
Select soft key.
If you only want to save the message, select
Save. After saving the message, the phone
returns to the Messages menu.
4. Select the memory where the message is saved
and press the OK soft key.
5. Enter a destination number and press the OK
soft key. The message is sent.
Messages
• Add Phonebook: allows you to add a
Phonebook entry in your message. Select one
from the list.
• Add Bookmark: allows you to add a web
page’s address stored in your Favorite list
(Menu 8.2.2). Select one from the list.
• Language: allows you to change the
language to be used in T9 input mode. Select
the language to be used.
4. Complete the message, and send or save it by
following the procedure from Step 2 on page 65.
Creating a Message using the Options
1. Create your message.
2. Press the Options soft key.
3. Select one of the following options by using the
and
keys and pressing the Select soft
key.
• Text Formatting: allows you to format the
style of the text. For the Size attribute, the
Normal, Large and Small sizes are
available. For the Underline and
Strikethrough attributes, select On or Off.
The attributes can be combined.
• Add Objects: allows you to add a sound,
melody, picture or animation to your message.
Select the category of item to be added;
Sound, Melody, Picture and Animation
are available. In each category, you can select
the various factory-set items or choose an
item received from other sources, such as the
Internet or other phones.
66
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of the five messages predefined in
the Templates menu option (Menu 1.4); for
further details, see page 67.
Templates
(Menu 1.4)
Using this menu, you can preset messages that you
use most frequently. Scroll through the template list
using the
and
keys. When the message
template you want to edit highlights, press the
Options soft key.
Edit: allows you to write a new message or edit the
selected message.
Note: For further information on how to enter
characters, refer to page 44.
Send Message: allows you to recall the selected
message. Once you have completed the message,
you can send, save and send, or simply save it. For
details on how to send a message, see page 65.
Delete: allows you to delete the selected message.
You are asked to confirm the deletion by pressing
the Yes soft key.
67
Messages
Settings
Messages
(Menu 1.5)
In this menu, you can set up default SMS
information. A setting group is a collection of
settings required to send messages. The number of
setting groups available depends on the capacity of
your SIM card.
Setting x (where x is the setting group number):
each group has its own sub-menu.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Default Destination: allows you to store the default
destination number. The number will automatically
display on the Destination screen when you create a
message.
Default Type: allows you to set the default message
type- Text, Fax, Email and Paging. The network can
convert the messages into the selected format.
Default Validity: allows you to set the length of time
for which your text messages will be stored at the
message centre while attempts are made to deliver
them.
Setting Name: allows to give a name to the setting
group currently being defined.
Common Setting: The following options are
available:
Reply Path: allows the recipient of your SMS
message to send you a reply message via your
68
message centre, if your network supports with this
service.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Bearer Selection: allows you to choose between
GSM and GPRS.
My Objects
(Menu 1.6)
After saving any objects received in messages into
your phone memory, using the Select Objects
option (see page 63), you can see the items in this
menu.
Three categories of items are available:
• My EMS Melody
• My EMS Picture
• My EMS Animation
You can forward the items to other people by
including into a message and/or use them for your
ring tone or background them in a image.
You can delete all of the items using the Delete All
option (Menu 1.6.4).
To
Press the
select a message box to
delete
Mark soft key.
cancel the selection
Unmark soft key.
delete the items in the
selected message box
Delete soft key.
69
Messages
Messages
If you want to delete all of the media items, select
All Object.
Memory Status
(Menu 1.7)
This menu shows how many messages are currently
stored in the SIM, phone and CB memories.
You can delete all of the messages in each message
box using the Delete all option (Menu 1.7.4).
To
Press the
select a message box to
delete
Mark soft key.
cancel the selection
Unmark soft key.
delete the items in the
selected message box
Delete soft key.
To quickly connect to the voice server, press and
hold the
key in the idle mode.
Voice Server Number: allows you to change the
voice mail server number, if necessary.
To
Press the
enter the server
number
corresponding numeric
keys.
correct a digit
Voice Mail
(Menu 1.8)
This menu provides you with a way of accessing
your voice mailbox, if provided by your network.
The following options are available:
Connect to Voice Server: before using this
feature, you must enter the voice server number
obtained from your service provider (see menu
option 1.8.2). You can then select this option and
simply press the OK soft key to listen to your
messages.
70
or
key.
Note: Voice Mail is a network feature. Please contact
your service provider for more information.
Broadcast
If you want to delete all of the messages, select All
Messages.
key.
move the cursor to
the left/right without
clearing the digit
(Menu 1.9)
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
• the phone is in the idle mode
• the Receive option is set to Enable
• the message channel is currently active in the
channel list
The following options are available:
Read: lets you view the message. Volatile
displays the messages from the network, but loses
its contents as soon as the phone is switched off.
Scroll through the message using the
and
keys. While reading a message, press the Save
71
Messages
Call Records
soft key to store the message in the Archive box
for later retrieval.
In this menu, you can view the:
Receive: allows you to enable or disable the
reception of broadcast messages.
• missed, incoming or outgoing calls
Channel List: allows you to indicate the channels
from which you wish to receive broadcast
messages. The following options are available:
• cost of your calls
Select: used to enable or disable channels in the list
by marking or unmarking them respectively. A
check mark displays in front of each selected
channel.
• length of time of the call you made or received
Note: You can access all of the numbers in the three
key in
types of call records by pressing the
idle mode.
Missed Calls
(Menu 2.1)
Add Channel: used to enter the ID and title for a
new channel.
This option lets you view the last 20 unanswered
calls.
Delete: used to remove a channel from the list.
The number and name, if available, are displayed,
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
Edit: used to change the ID and title of an existing
channel.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
• delete the call from the list
Please contact your service provider for more
information.
• make a call to the number
• edit the number, if available, and save it in the
Phonebook
Received Calls
(Menu 2.2)
This option lets you view the last 20 phone calls
answered.
The number and name, if available, are displayed,
together with the date and time when the call was
received. By pressing the Options soft key, you
can:
• delete the call from the list
• edit the number, if available, and save it in the
Phonebook
• make a call to the number
72
73
Call Records
Call Records
Dialled Calls
(Menu 2.3)
This option lets you view the last 20 numbers
dialled.
The number and name are displayed, together with
the date and time when the call was made. By
pressing the Options soft key, you can:
• delete the number
• edit the number and save it in the Phonebook
Total Received: the total length of all calls
received since the timer was last reset.
Reset Timers: the option used to reset the call
timers; you must first enter the phone password
(see page 123) and then press the OK soft key.
Call Cost
(Menu 2.6)
• make a call to the number
This feature lets you view the cost of call.
Depending on your SIM card, this menu option may
not be shown.
Delete All
The following timers are available:
(Menu 2.4)
Last Call Cost: the cost of the last call made.
You can delete all of the numbers stored in each call
record.
When a confirming message appears, press the
Yes soft key to confirm.
Total Cost: the total cost of all calls made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set Max
Cost option, you can no longer make any calls until
you reset the counter.
Call Time
Max Cost: the maximum cost set in the Set Max
Cost option (see below).
(Menu 2.5)
This option lets you view the timers for calls made
and received.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, such as rounding-off for
billing purposes.
The following timers are available:
Last Call Time: the length of the last call.
Reset Counters: the option used to reset the cost
counter; you must first enter your PIN2 (see
page 125) and then press the OK soft key.
Set Max Cost: the option used to enter the
maximum cost that you authorise for your calls.
Price/Unit: the option used to set the cost of one
unit; this price per unit is applied when calculating
the cost of your calls.
Total Sent: the total length of all calls made since
the timer was last reset.
74
75
Camera
Camera
Using the camera module built in your phone, you
can take pictures of people or events while on the
move. Additionally, you can send photos to other
people in a picture message or as an e-mail
attachment. The camera produces JPEG pictures.
The
and keys on the left side of the phone
allow you to flip the picture up and down.
3. Press the Take soft key to take a picture.
If you want to have the delay time of 10
seconds, press the After 10s soft key.
4. Press the Save soft key to save the photo.
New Photo
(Menu 3.1)
In this menu, you can take a picture and save it.
5. Enter a name for your photo and press the OK
soft key.
For further details about entering characters,
see page 44.
To take a picture:
Note: When you take a picture in direct sunlight or
under too bright illumination, shading may
occur on the picture.
1. Accessing this menu turns on the camera at the
top left of the phone.
You can see the picture to be captured on the
display.
2. Adjust the picture by rotating the camera
module.
My Photos
(Menu 3.2)
This menu allows you to review your photos.
When you access this menu, the latest photo is
displayed. Press the or key to scroll through
the photos.
Pressing the Multi soft key shows the photos as
thumbnail images on one screen. In thumbnail view
mode, use the navigation keys to scroll through the
photos. To go back to normal view mode, press the
View soft key.
Press the Options soft key to use the following
options:
Wallpaper: allows you to set the photo to be
displayed on the idle screen as a background
image.
Use the
and
of the picture.
Use the
picture.
76
and
keys to adjust the brightness
keys to adjust the size of the
Delete: deletes the photo.
Delete All: deletes all of the photos saved in your
phone.
Rename: allows you to change the name of the
photo.
77
Sound Settings
Sound Settings
Alert Type
You can use the Sound Settings feature to
customise various settings, such as the:
• ring melody, volume and type
(Menu 4.3)
This option allows you to specify how you are to be
informed of any incoming calls.
• sounds made when you press a key, make an
error or receive a message
The following options are available:
Ring Tone
Melody: the phone rings using the ring melody
selected via the Ring Tone menu option
(Menu 4.1); see page 78.
(Menu 4.1)
This option allows you to select the required ring
melody.
You can choose between many different melodies.
Each time you select a melody, it is played for a few
seconds. If you have downloaded any sounds from
the Internet or EasyGPRS program or received any
ring tone messages, you can view the list in this
menu.
Ring Volume
This option allows you to adjust the ring volume to
one of five levels.
78
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Keypad Tone
(Menu 4.4)
This option allows you to select the tone that the
keypad generates when you press a key.
(Menu 4.2)
Use the
and
keys or the
the left side of the phone.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
and
You can select an option from OFF, Cool, Piano,
Tone and Beep.
To turn off the sound, select OFF.
keys on
79
Sound Settings
Message Tone
Sound Settings
(Menu 4.5)
This option allows you to select how the phone
informs you that a new message has been received.
SMS Tone
This option allows you to select how the phone
informs you that a new SMS message has been
received.
The following options are available:
OFF: the phone does not use the SMS tone.
Light Only: the service light on the folder cover
flashes.
Vibration: the phone vibrates.
Folder Tone
(Menu 4.6)
This option allows you to turn on or off the sounds
that the phone generates when you open and close
the folder.
You can choose from Off, Future and Crystal.
To turn off the sound, select Off.
Power On/Off
(Menu 4.7)
This option allows you to turn on or off the sounds
that the phone generates when it is switched on
and off.
You can choose from Off, Classical and Cheerful.
To turn off the sound, select Off.
Single Beep: the phone beeps once.
SMS Tone x: the phone uses an SMS tone. You
are provided with several SMS tones.
Extra Tones
SMS-CB Tone
You can customise various other tones used by the
phone.
(Menu 4.8)
This option allows you to select how the phone
informs you that a new cell broadcast (CB) message
has been received.
To turn a given
tone
Press the
The following options are available:
on
ON soft key.
A check mark is displayed in
front of the option.
off
OFF soft key.
The check mark is no longer
displayed.
OFF: the phone does not use the CB tone.
Light Only: the service light on the folder cover
flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone x: the phone uses a CB tone. You
are provided with several CB tones.
80
81
Sound Settings
Phone Settings
The following options are available:
Error Tone: sets whether the phone informs you
that you have made a mistake or not.
Minute Minder: sets whether the phone must
beep every minute during an outgoing call to keep
you informed of the length of your call.
Connect Tone: sets your phone to beep when the
person you are calling answers the phone.
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
Infrared Activate
(Menu 5.1)
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
• configure and activate an IrDA-compliant infrared
port on your PC
• activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display
• align the IrDA port on the phone with the IrDA
port on your computer
15
IrDA port
IrDA port
The connection is ready for data transmission.
If there is no communication between your phone
and the IrDA-compliant device within 30 seconds of
activating the feature, it is automatically
deactivated.
Note: For the best performance, use the optional data
link cable. You can buy one from your local
Samsung dealer.
82
83
Phone Settings
My Settings
Phone Settings
(Menu 5.2)
You can change the background image and the
disply style of the menu mode according to your
preference.
Wallpaper
Greeting Message
(Menu 5.3)
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
When you select this menu, the current message is
displayed.
This option allows you to change the background
image (wallpaper) to be displayed in idle mode.
To
Press the
To change the background image:
clear the existing
message
key and hold it until the
message is cleared.
enter a new
message
appropriate alphanumeric
keys.
1. Scroll through the list by pressing the
key.
or
You have various preset images available. If you
set a photo as your wallpaper in the My Photos
menu option (Menu 3.2), you can see it by the
name of My Photo.icn.
If you do not want to use the background image,
select Blank Wallpaper.
2. Press the Select soft key when the desired
image highlights.
The selected image is displayed.
3. After viewing the image, press the Select soft
key to display it on the idle screen. The display
asks you if you want to display text on the
screen.
4. Press the Yes soft key to display the current
date and time on the wallpager image. To display
only the wallpaper, press the No soft key.
change the text
input mode
soft key.
For further details on how to enter characters, refer
to page 44.
Own Number
(Menu 5.4)
This feature allows you to:
• Assign a name to your own phone number
registered on your SIM card
• Edit the name and number
This function is a memory aid, which you can use to
check your own phone number if you need to do.
Any changes made here do not in any way affect
the actual subscriber number on your SIM card.
Menu Style
This option allows you to select the menu display
style. You can choose between Film Style and
Page Style.
84
85
Phone Settings
Language
Phone Settings
(Menu 5.5)
You can select a display language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Security
(Menu 5.6)
The Security feature enables you to restrict the use
of your phone to:
• the people of your choice
• the types of calls of your choice
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections (see also pages 123-125).
PIN Check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To change your PIN, refer to the Change PIN
menu option (Menu 5.6.2).
The following options are available:
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
86
Phone Lock
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is factory set to “00000000.” To
change the phone password, refer to the Change
Password menu option (Menu 5.6.4) below.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
87
Phone Settings
Phone Settings
SIM Lock
Display Settings
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Brightness
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
FDN Mode
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
(Menu 5.7)
This option allows you to adjust the contrast of the
display screens to make them lighter or darker.
To adjust the display contrast:
1. Select the required display, Main LCD or Front
LCD, and press the Select soft key.
2. Adjust the contrast using the
and
keys or
the
and
keys on the left side of the phone.
3. When you are satisfied, press the OK soft key to
save the selection.
The following options are available:
Disable: you can phone any number.
Back Light
Enable: you can only call phone numbers stored in
the Phonebook. You must enter your PIN2.
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, refer to the Change PIN2
menu option (Menu 5.6.7) below.
Select the length of time for which the backlight is
on. The backlight comes on when you press a key
or receive a call or message and lights up for the
specified length of time. Then it dims and finally
switches off after one minute.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
Auto Light
Using this feature, you can specify the time for
which the backlight is to be used. This feature helps
conserve your battery power.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
88
89
Phone Settings
Phone Settings
The following options are available:
Extra Settings
Disable: the backlight is used according to the
setting in the Back Light menu option
(Menu 5.7.2); see page 89.
You can turn the automatic redialling or answering
features on or off.
(Menu 5.8)
Enable: the backlight is used only during the
specified period of time. Set the time when the
phone will turn on the light and turn it off, using the
appropriate number keys.
To turn a feature
Press the
on
ON soft key.
A check mark is displayed in
front of the option.
Service Light
off
OFF soft key.
The check mark is no longer
displayed.
This option allows you to select whether or not the
service light on the folder cover is used or in which
colour it flashes.
Select one from the seven colour settings available.
When the phone is ready for use, the service light
will flash in the appropriate colour.
The following options are available:
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a phone
number after an unsuccessful call.
If you do not want to use the service light,
select Off.
Note: The interval between two call attempts varies.
Graphic Logo
Active Folder: when this option is checked, you
can simply open the folder to answer a call.
This option allows you to display your operator’s
logo instead of its name.
On: the operator logo stored in your phone is
displayed in idle mode; if no logo has been stored,
the operator name is displayed.
Off: the operator name is displayed in the idle
mode.
When it is unchecked, you must open the folder and
press a key, depending on the setting of the
Anykey Answer option (see below).
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
key, except the
key, the
key and the
Reject soft key. To reject the call, press the
key or the Reject soft key.
When this option is unchecked, you can only press
the
key or Accept soft key.
90
91
Phone Settings
Short Cut
(Menu 5.9)
The navigation keys can be used as shortcut keys.
When held down in idle mode, they allow you to
access specific menu options directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by
pressing the
or
key, followed by the
Select soft key.
• Key up (
)
• Key down (
)
• Key right ( )
• Key left ( )
2. Select the menu option to be assigned to the
key by pressing the
or
key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset Settings
(Menu 5.10)
You can easily reset your phone to its default
settings. To reset your phone:
1. Select the Reset Settings menu option.
2. Enter the 8-digit phone password and press the
OK soft key.
Note: The password is preset to “00000000.” To
change this password, refer to page 87.
92
Organiser
The Organiser feature enables you to:
• view the calendar and organise your schedule
• define a list of things to do
• set the current date and time
• set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations
Calendar
(Menu 6.1)
With the Calendar feature, you can:
• consult the calendar
• write memos to keep track of your schedule and
trigger an alarm, if necessary
Consulting the Calendar
When you select the Calendar menu option
(Menu 6.1), the calendar displays. The following
options are available when you press the Options
soft key.
Search all: displays all memos set, regardless of
the day and starting with the oldest. To scroll
through the memos, press the
or
key.
Delete all: allows you to delete all memos. You
are asked to confirm your action.
Go to date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to the
idle mode.
93
Organiser
Writing a Memo
Organiser
To write or edit a memo on a specific date:
Once you have finished editing the memo, press the
OK soft key. The following options are then
available when you press the Options soft key.
1. Select the required date in the calendar, using
the navigation keys.
Alarm: allows you to set the alarm to ring on the
chosen day.
Note: To skip to the previous or next month, press
the volume keys on the left side of the
phone.
2. Press the Select soft key.
An empty memo screen is displayed to allow you
to enter your memo.
3. Enter your memo and then press the OK soft
key.
Copy to: allows you to copy the memo to another
date and/or time.
Move to: allows you to change the date and/or
time of the memo.
To Do List
(Menu 6.2)
Note: For further details on how to enter
characters, refer to page 44.
This feature allows you to:
You are asked if you wish to set an alarm.
• assign a priority and deadline to each task
4. If you want the alarm to ring on the chosen day,
press the Yes soft key.
Otherwise, press the No soft key.
5. If you pressed the Yes soft key, set the time for
the alarm and press the OK soft key.
The colour of the date is changed to green to
indicate that a memo exists.
Editing a Memo
If you select a day for which a memo already exists,
you can press the Edit soft key to edit the memo
displayed.
Note: For further details about how to enter
characters, refer to page 44.
94
Erase: allows you to delete the memo.
• enter a list of tasks to be done
• sort the tasks by priority and status mark
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: You can enter up to 40 characters. For
further details on how to enter characters,
see page 44.
3. Press the OK soft key.
4. Select high, normal or low priority using the
or
key and press the Select soft key.
5. Enter your deadline.
If you do not want to set a deadline, press the
Skip soft key.
95
Organiser
Organiser
6. Press the OK soft key.
Editing the To Do List
If tasks are already defined in the To Do List when
you select the To Do List menu option
(Menu 6.2), the current contents are displayed
with a status mark and priority (
for high,
normal and
for low).
To...
Then...
sort the existing
tasks by priority or
status
• press the Options soft key.
• select the Sort option.
• select the sort criterion
(High, Low, Done or
Undo).
copy a task
•
•
•
•
copy a task to the
calendar
• highlight the task.
• press the Options soft key.
• select the Copy to
calendar option.
• change the text and
deadline for the task and
set the alarm as required.
delete a task
• highlight the task.
• press the Options soft key.
• select the Delete option.
delete all tasks
• press the Options soft key.
• select the Delete all
option.
• confirm the deletion by
pressing OK.
exit the To Do list
• press the Options soft key.
• select the Exit option.
The following options are available:
To...
Then...
view the details
for a specific task
• highlight the task.
• press the View soft key.
change the status
of a specific task
• highlight the task.
• press the
key to mark
the task as completed as of
the current date and time.
or
• highlight the task.
• press the Options soft key.
• select the Mark option.
• select the appropriate
status (Done or Undo).
create a new
task
• press the Options soft key.
• select the New option.
• enter text, priority and
deadline for the task.
edit an existing
task
•
•
•
•
96
highlight the task.
press the Options soft key.
select the Edit option.
change the text, priority
and deadline for the task.
highlight the task.
press the Options soft key.
select the Copy option.
change the text, priority
and deadline for the task as
required.
97
Organiser
Time & Date
Organiser
(Menu 6.3)
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
The following options are available:
Set Time: allows you to enter the current time.
You can choose the time format via the Time
Format menu option (Menu 6.3.4).
Alarm
(Menu 6.4)
This feature allows you to:
• set the alarm to ring at a specific time
• set the phone to switch on automatically and ring
the alarm even if the phone is switched off
(Autopower menu option set to Enable)
The following options are available:
Once Alarm: the alarm rings only once and is
then deactivated.
Note: Before setting the time, you must specify your
time zone, in the World Time menu option
(Menu 6.3.3).
Daily Alarm: the alarm rings every day at the
same time.
Set Date: allows you to enter the day, month and
year.
Morning Call: the alarm rings to wake you up in
the morning.
World Time: allows you to check the current time
for Greenwich Mean Time (GMT) and 21 major cities
around the world, using the and keys.
To set the alarm:
The screen shows the:
1. Choose the type of alarm to be set.
2. Enter the required time and day of the week, if
applicable.
• city name
• current date and time
3. Press the OK soft key.
• time difference between the selected city and
your city if you have set the local time (see below
for further details)
4. If you select Morning Call in Step 1, select the
repeat option; Monday to friday or Monday
to Saturday.
To select your time zone:
Remove Alarm: deactivates all alarm settings.
1. Select the city corresponding to your time zone
by pressing the or key one or more times.
The local date and time display.
Autopower: if this option is set to Enable, the
alarm will ring at the specified time, even when the
phone is switched off.
2. Press the Set soft key.
If the menu option is set to Disable and the phone
is switched off at the specified time, the alarm will
not ring.
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
98
99
Organiser
Organiser
To stop the alarm when it rings, open the folder and
press the Exit soft key.
Currency Exchange
When setting or viewing an alarm, the following
options are available when you press the Options
soft key:
Using this menu option, you can make currency
conversions.
Remove Alarm: deactivates the current alarm.
Alarm Sound Set: allows you to select the alarm
melody.
Calculator
(Menu 6.6)
1. Enter the current exchange rate of your source
currency and press the OK soft key.
You can insert a decimal point by pressing
the
key.
2. Enter the amount for which you wish to conduct
the currency conversion and press the OK soft
key.
(Menu 6.5)
With this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions: addition, subtraction,
multiplication and division.
The exchange rate amount you entered and
equivalent value display.
3. Press the Exit soft key to exit the currency
convertor.
Using the Calculator
1. Enter the first number using the numeric keys.
2. Press the right soft key until the required
arithmetic symbol appears: + (add), (subtract), * (multiply), / (divide).
3. Enter the second number.
4. Repeat Steps 1 to 3 as many times as required.
Notes:
• To erase any mistakes or clear the display, press the
key.
• To include a decimal point or a bracket, press the left
soft key until the required symbol is displayed.
5. To calculate the result, press the
100
key.
101
Network Services
Network Services
To set your call diverting options:
These menu functions are network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
Call Diverting
(Menu 7.1)
This network service enables incoming calls to be
rerouted to the number that you specify.
1. Select the type of call diverting required by
pressing the
or
key until the appropriate
option highlights, and then press the Select
soft key.
2. Select the type of calls to be diverted by
pressing the
or
key until the appropriate
option highlights and then press the Select soft
key.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
The current status displays. If the option has
already been set, the number to which the calls
are diverted displays.
Call diverting can be set up in the following ways:
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already on
another call.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in
an area covered by your service provider.
Cancel All: all call diverting options are cancelled.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Data calls only
Example: You can divert voice calls to your
colleague if you are already using the
phone.
102
3.
To
Press the
activate call
diverting
Activate soft key.
Go to Step 4.
change the
call number
Go to Step 4.
deactivate call
diverting
Change soft key.
Remove soft key.
4. Enter the number to which the calls are to be
diverted and press OK.
To enter an international code, press the
key until the + sign displays.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel All option.
103
Network Services
Call Barring
Network Services
(Menu 7.2)
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which is
the country where your home network provider is
located.
2. Press the Activate soft key to confirm your
settings.
3. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option
applies.
3. Press the Deactivate soft key.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be
received when you are using your phone outside of
your home service area.
Cancel All: all call barring settings are
deactivated; calls can be made and received
normally.
You can specify individual barring options for each of
the following call types:
• Voice calls only
• Data calls only
To set your call barring options:
1. Select the type of call barring required by
pressing the
or
key until the appropriate
option highlights and then press the Select soft
key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays
You can also deactivate all call barring settings by
selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can specify a
new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
Select the type of calls to be barred by pressing the
or
key until the appropriate option highlights
and then press the Select soft key.
104
105
Network Services
Call Waiting
Network Services
(Menu 7.3)
Network Selection
(Menu 7.4)
This network service enables you to be informed
when someone is trying to reach you during
another call.
The Network Selection feature enables you to
automatically or manually select the network used
when roaming outside of your home area.
You can specify individual call waiting options for
each of the following call types:
Note: You can select a network other than your home
network only if it has a valid roaming agreement with your home network.
• Voice calls only
• Data calls only
To set your call waiting options:
1. Select the type of calls to which the call waiting
option is to be applied by pressing the
or
key until the appropriate option highlights and
then press the Select soft key.
The screen informs you whether call waiting is
activated or deactivated.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
To return to the previous screen, press the Exit
soft key.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
106
To indicate automatically or manually select the
network when roaming:
1. When Network Selection displays, press the
Select soft key.
2. Press the
or
key until the appropriate
option highlights and then press the OK soft
key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Press the
or
key until the preferred
network highlights and then press the OK soft
key.
You are connected to that network.
107
Network Services
Caller ID
Network Services
Add a new CUG index as advised by your service
provider or delete a selected group.
(Menu 7.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
To
Note: Some networks do not allow the user to change
this setting.
scroll the through
the existing CUG
indexes
Press the
or
key.
The following options are available:
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
Hide Number: your number is not displayed on
the other person’s phone.
delete a CUG
index
Options soft key and select
the Delete option.
Send Number: your number is sent each time you
make a call.
activate a CUG
index
Options soft key and select
the Activate option.
Closed User Group (CUG)
Outside Access: lets you enable or disable calls
to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Default: the default setting provided by the
network is used.
(Menu 7.6)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to ten user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access the
following options after pressing the Select soft key.
Default Group: you may set a default CUG with
your service provider. If you have done so, you can
enable the Default Group option on your phone.
When making a call, you are given the option of
using your default CUG, instead of selecting one
from the list.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
108
109
Network Services
Funbox
Band Selection
(Menu 7.7)
The Funbox menu contains several fun options.
For the phone to make and receive phone calls, it
must register with one of the available networks.
Your phone can handle any of the following types of
network:
• GSM 900
• GSM 1800
Games
(Menu 8.1)
You can enjoy three games with your phone.
Scroll to the required game, using the
keys and press the Select soft key.
and
• Combined GSM 900/1800
The following options are available:
• GSM 1900
Newgame: starts a new game.
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
HighScore: shows the highest scores list. Up to 5
gamers can be ranked. Not all games have this
option.
1. When Band Selection displays, press the
Select soft key.
2. Press the
or
key until the appropriate
option (GSM 900/1800 or GSM 1900)
highlights and press the OK soft key.
Key Info.: provides you the help screen,
illustrating the key operation in the game.
Continue: allows you to continue the game you
previously saved. This option is available only when
you saved a game.
When you select a new band, your phone displays a
confirmation message and then automatically
searches for all of the available networks. Your
phone registers with a preferred network within the
selected band.
110
111
Funbox
WAP Browser
Funbox
(Menu 8.2)
Your phone is equipped with a Wap (Wireless
Application Protocol) browser to allow you to access
and navigate the Wireless Web via your phone.
Home
Selecting this option connects the phone to the
network and loads the homepage of the Wireless
Web service provider.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To
scroll through the screen, use the
and
keys.
Note: To access the startup homepage from any
other screen in the WAP browser, use the Home
option. For more information on the WAP
Browser menus, refer to page 114.
To
Then
select a numbered
item
press the corresponding
numeric key.
return to the
previous page
press the Back soft key or
the
key.
return to the
startup homepage
select the Home menu
option; for more information
about this option, see page
page 114.
Entering Text, numbers or Symbols
When you are prompted to enter text, the current
text entry mode is indicated on the screen. The
following modes are available:
Mode
Allows you to enter letters in the
alphabet. Press the corresponding
key until the required letter
displays.
Using the Soft Keys
A bar containing browser commands is located at
the bottom of the WAP browser display. The soft
keys (
) below the bar are used to execute
these commands. The two keys are called soft keys
because their function changes depending on the
WAP browser application in use.
Navigating the WAP Browser
To
Then
scroll through and
select browser
items
press the
or
key until
the symbol
points to the
required item, and then press
the OK soft key to confirm
the selection.
112
Description
Allows you to enter numbers.
Note: To enter symbols, press the
required symbol displays.
To
Then
change
modes
press the
times.
enter a
space
press the
key until the
key one or more
key.
113
Funbox
Funbox
Exit: lets you exit the current browser.
To
Then
edit text
• set the cursor to the right of
the character(s) to be
corrected.
• press the
key as required.
• enter the correct character(s).
Mark Site: allows you to set a bookmark for most
pages so that you can access them directly from
any web page.
Bookmarks: allows you to load a bookmarked
Web page directly.
Exiting the WAP Browser
Inbox: displays all of the web alerts.
To exit the browser at any time, simply press the
key.
Save Image: allows you to save the displayed
image on the current page. You can see the saved
image in Pictures of the Downloads menu option
(Menu 8.3).
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To access a menu option:
1. Press and hold the
A menu displays.
key.
2. Highlight the required menu option by pressing
the
and
keys.
3. Select the option by pressing the Select soft
key.
4. If necessary, select the secondary option using
the
and
keys, and press the Select soft
key to confirm.
Note: The menus may vary, depending on your
version of the WAP Browser.
The following menu options are available:
Back: reloads the previous page in the history.
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
114
Reload: reloads the current page.
Settings: gives you access to the following setting
features.
Homepage: you can change the startup homepage
manually.
Proxy: allows you to change the proxy server to the
desired one without ending the current wap session
establishment.
Circuit Prompt: allows you to set the prompt
confirming your selection to display each time you
access a site without wap session establishment.
Select ON to display the confirming window, or
OFF not to display.
Circuit Linger: allows you to set how long the phone
waits for before ending the attempt for connection
when there is no answer from the network. It is
preset to 60 sec.
Scroll Mode: lets you select the scroll mode
between Block and Smooth.
Scroll Speed: allows you to set the speed for
scrolling to the next screen. You can select Fast,
Medium and Slow.
115
Funbox
Key Press Timeout: allows you to set how fast the
phone recognises your selection with one keypress.
You can select Fast, Medium and Slow.
Security: displays all information about security,
such as Connection Prompt, Current Certificate,
Secure Prompt, and Encryption.
Advanced: displays the current URL address,
restarts the browser without exiting it, and allows
you to delete a site from the offline services list.
About: provides you with information about the
version of the Mobile Browser software and the WIM
(WAP Identity Module).
Favorite
This option allows you to store the URL addresses of
your favourite web sites. You can access this menu
directly by pressing and holding the
key while
using the WAP Browser.
To store a URL address:
1. Select an empty location and press the Options
soft key.
2. Enter the desired address and press the Enter
soft key.
3. Enter a name for the favourite item and press
the Enter soft key.
After saving favourite items, you can use the
following options by pressing the Options soft key:
Funbox
Settings
This option allows you to set up five proxy servers
for the WAP browser. Contact your service provider
for details about setting options.
For each server, the following options are available:
Profile Name: Enter a name that you wish to
assign to the HTTP proxy server.
Homepage URL: Set the address of your startup
homepage. When the default homepage is
displayed, you can delete it using the
key and
enter your own choice.
Security: Set to desired data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose Nonsecure.
IP Address: WAP gateway address required to
connect to the Internet.
Bearer: Bearer to be used for each type of network
address accessed: GPRS or Data.
When the bearer is set to Data
Login Name: Set the PPP server login ID.
Password: Set the PPP server password.
Dial-up Number: PPP server phone number.
Data Call Type: Data call type: Analogue or
ISDN.
Goto URL: quickly accesses you to the site.
Edit: allows you to edit the selected address.
Erase: deletes the selected address.
116
117
Funbox
Funbox
When the bearer is set to GPRS
Downloads
User Name: Set the User ID required to connect
to the GPRS network.
Sounds
Password: Set the password required to connect
to the GPRS network.
APN: Set the access point name used for the
address of the GPRS network gateway.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further information.
Clear Cache
You can clear the information stored in the cache,
the phone’s temporary memory which stores the
most recently accessed Web pages.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
(Menu 8.3)
In this menu, you can view the list of sounds
downloaded from the server. You can set the
downloaded sounds as the current ring tone, but
cannot send the sounds to other phones.
When the memory is full, a warning message is
displayed and the phone rejects additional sounds
until you erase obsolete ones.
Pictures
In this menu, you can view the list of pictures
downloaded from the server. You can set the
downloaded pictures as the current background
image, but cannot send them to other phones.
When the memory is full, a warning message is
displayed and the phone rejects additional pictures
until you erase obsolete ones.
Push Message
You can set whether or not you will receive Web
messages from the server, and read or delete the
messages received.
The following options are available:
Inbox: allows you to read the messages received.
Receive: allows you to set whether or not you will
receive the web messages. Select Always to
receive the messages. Otherwise, select Never.
Delete All: allows you to delete all of the web
messages received.
118
119
Solving Problems
Solving Problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
When you switch your phone on, the
following messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“No service,” “Network failure” or “Not
done” is displayed
• The network connection was lost. You may be in a
weak signal area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
• Have you pressed the
key?
Enter PIN
• Are you accessing the right cellular network?
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• You may have set an outgoing call barring option.
• The PIN Check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN Check menu
option (Menu 5.6.1).
• Is your phone switched on (the
for more than one second)?
Enter PUK
• You may have set an incoming call barring option.
• The PIN code was entered incorrectly three times
in succession and the phone is now blocked.
Enter the PUK supplied by your network operator.
Your correspondent cannot hear you
speaking
Your correspondent cannot reach you
key pressed
• Are you accessing the right cellular network?
• Have you switched off the microphone?
120
121
Solving Problems
Access Codes
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
• The battery is insufficiently charged. Replace the
battery and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phonebook entry
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store the number, if necessary.
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorized use.
When requested for any of the codes explained
below, key in the appropriate code (displayed as
asterisks) and press the OK soft key. If you make a
mistake, press the
key until the incorrect digit
is cleared and then continue entering the correct
code.
The access codes, except for the PUK and PUK2
codes can be changed using Security menu
options (Menu 5.6). See page 86 for further
details.
Important! Avoid using access codes resembling
emergency numbers, such as 911, so
that you do not dial an emergency
number accidentally.
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The
phone password is supplied with the phone and is
preset to “00000000” at the factory.
To
Refer to
If the above guidelines do not help you to solve
the problem, take a note of:
activate/deactivate the
Phone Lock feature
page 87
(Menu 5.6.3).
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
change the phone
password
page 87
(Menu 5.6.4).
Then contact your local dealer or Samsung aftersales service.
122
123
Access Codes
Access Codes
PIN
PIN2
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against unauthorized
use. It is usually supplied with the SIM card.
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions, such
as setting the maximum cost of a call. These
functions are available if supported by your SIM
card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be used
until you re-enable it by entering the PUK (see
below).
To
Refer to
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
activate/deactivate the
PIN Check feature
page 86
(Menu 5.6.1).
To change the PIN2, refer to page 88
(Menu 5.6.7).
change the PIN
page 87
(Menu 5.6.2).
PUK2
PUK
The 8-digit PUK (PIN Unblocking Key) is required to
change a disabled PIN. The PUK may be supplied
with the SIM card. If not, or you have lost it,
contact your service provider.
To re-enable your PIN:
1. Key in the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the
OK soft key.
3. When the Confirm New PIN message is
displayed, key in the same code again and press
the OK soft key.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid. Contact
your service provider for a new card.
124
The 8-digit PUK2 (PIN Unblocking Key 2), supplied
with some SIM cards, is required to change a
disabled PIN2. If you lose the code, contact your
service provider.
To re-enable your PIN2:
1. Key in the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the
OK soft key.
3. When the Confirm PIN2 message is displayed,
key in the same code again and press the OK
soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your service
provider for a new card.
125
Health and Safety Information
Health and Safety
Information
Exposure to Radio-Frequency
Energy (SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the phone.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
126
127
Health and Safety Information
Health and Safety Information
Precautions When Using Batteries
Your phone is powered by a rechargeable Li-ion
standard battery.
• Never use any charger or battery that is damaged
in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and life-time of
the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold
battery may temporarily not work, even when the
battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C
(32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
• Use only Samsung-approved batteries and
recharge your battery only with Samsungapproved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
128
129
Health and Safety Information
Health and Safety Information
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where
lives are in danger, call the emergency number,
as you would want others to do for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
10. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be
stolen, call roadside assistance or any other
special non-emergency wireless number.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your Phonebook takes your
attention away from your primary responsibility,
driving safely.
130
131
Health and Safety Information
Health and Safety Information
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and recommendations of Wireless Technology Research.
132
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such interference, you may wish to consult your hearing aid
manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
133
Health and Safety Information
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
Health and Safety Information
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call, proceed as follows.
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
134
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
135
Health and Safety Information
Health and Safety Information
Other Important Safety Information
Care and Maintenance
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Do not touch the phone with a wet hand while it
is charging. Doing so may cause an electric shock
to you or damage to the phone.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
136
137
Health and Safety Information
Glossary
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features on your mobile phone,
here are a few definitions.
Active Folder
Ability to answer a call simply by opening the
phone.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming
call when engaged on another call.
GSM (Global System for Mobile
Communication)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Line Identification Services (Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
138
139
Glossary
Glossary
Multiparty Calling
SIM (Subscriber Identification Module)
Ability to establish a conference call involving up to
five additional parties.
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically
each time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorized use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
PUK (PIN Unblocking Key)
Two keys marked
purpose of which:
and
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
• varies according to the function that you are
currently using
on the phone, the
• is indicated on the bottom line of the display just
above the corresponding key
Roaming
Use of your phone when you are outside your home
area (when traveling for example).
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
140
Tri Band
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM 900/
1800 and GSM 1900 MHz bands, for greater call
success and wider roaming.
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
141
Glossary
Voice Mail
Computerized answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
142
Index
A
Access codes • 123
Accessories • 9
Active folder • 91
Alarm, set (6.4) • 99
Alert type (4.3) • 79
Answering
a call • 27
a second call • 53
Anykey answer • 91
Auto light • 89
Auto power, alarm • 99
Auto redial• 91
B
Background image • 84
Backlight • 15, 89
Barring
password • 105
Battery
charging • 19
low battery indicator •
22
precautions • 128
Broadcast (1.9) • 71
C
Calculator (6.5) • 100
Calendar (6.1) 93
Calendar (7.1) • 93
Caller ID (7.5) 108
Calls
answering
a call • 27
a second call • 53
cost (2.6) • 75
dialled (2.3) • 74
diverting (7.1) • 102
emergency • 135
ending • 25
holding • 50
international • 24
making • 24
missed • 28, 73
multiparty • 53
received (2.2) • 73
records (2) • 73
redialling automatically
91
time (2.5) • 74
via phonebook • 39
waiting 106
waiting (7.3) • 53
Camera (3) • 76
Card
installing the SIM • 17
Care • 137
Changing
barring password • 105
password (5.6.4) • 87
PIN (5.6.2) • 87
PIN2 (5.6.7) • 88
Characters
changing mode • 45
entering • 44
Charging battery • 19
Closed User Group (7.6) •
108
Conference call • 53
Connect tone • 82
Contrast (5.7.1) • 89
Copying
memos • 95
phonebook number • 38
task • 97
Correcting numbers • 24
Cost of calls (2.6) • 75
CUG • 108
Currency Exchange (6.6) •
101
D
Date setting (6.3.2) • 98
Deleting
memos • 95
messages • 63, 64
missed calls • 29, 73
phonebook number • 38
tasks • 97
Display
contrast • 89
icons • 14
143
Index
layout • 13
setting language • 86
Diverting calls (7.1) • 102
Downloads (8.3) • 119
E
Earpiece volume • 26
Editing
memos • 94
missed calls • 28, 73
phonebook number • 38
tasks • 96
to do list • 96
Emergency calls • 135
Error tone • 82
F
FDN mode (5.6.5) • 88
Fixed Dial Number mode • 88
Funbox (8) • 111
Functions, select • 31
G
Game (8.1) • 111
Greeting message (5.3) • 85
Groups
user • 108
H
Holding calls • 50
I
Icons, description • 14
Identifying a caller • 27
Incoming calls (2.2) • 73
Incoming messages
text (1.1) • 62
Infrared activate (5.1) • 83
IrDA port • 83
144
Index
K
Key tones
adjusting volume • 26
muting • 52
selecting (4.4) • 79
sending • 52
Keys
description • 11
location • 10
shortcut • 92
L
Language (5.5) • 86
Last number, redial • 25
Length of calls • 74, 82
Letters
changing mode • 45
entering • 44
Light
backlight • 15, 89
service • 16, 90
Locking phone (5.6.3) • 87
Low battery indicator • 22
Lower-case characters
entering • 47
M
Maintenance • 137
Memory status
message (1.7) • 70
phonebook • 43
Memos
copying • 95
deleting • 95
editing • 94
writing • 94
Menus
accessing by scroll • 56
accessing by shortcuts •
57
list • 57
Message tone (4.5) • 80
Microphone, mute • 51
Minute minder • 82
Missed calls • 28, 73
Morning Call • 99
Multiparty calls
dropping • 55
making • 54
private conversation •
54
Muting
key tones • 52
microphone • 51
My objects (1.6) • 69
N
Names
entering • 44
searching/dialling • 39
storing • 35
Network selection (7.4) •
107
Network services (7) • 102
Numbers
copying phonebook • 38
correcting • 24
erasing • 38
fixed dial • 88
own • 85
pasting phonebook • 37
searching/dialling • 39
storing • 35
Phone
lock (5.6.3) • 87
password • 123
settings (5) • 83
Phonebook
copying • 38
editing • 38
erasing • 38
options • 37
pasting • 37
searching/dialling • 39
speed-dialling • 42
storing numbers/names
• 35
Photos, take • 76
PIN
changing • 87
checking • 86
code • 124
PIN2
changing • 88
code • 125
Problem solving • 120
PUK • 124
PUK2 • 125
R
Options, select • 31
Organiser (6) • 93
Outgoing calls (2.3) • 74
Outgoing messages
text (1.2) • 63
Own number (5.4) • 85
Read messages
text (1.1) • 62
Redialling
automatically • 91
last number • 25
Reset setting (5.10) • 92
Ring
tone (4.1) • 78
type (4.3) • 79
volume (4.2) • 78
Roaming • 107
P
S
Password
barring
changing • 105
Password, phone
changing • 87
code • 123
Safety
information • 126
precautions • 7
Schedule • 93
Searching in phonebook • 39
Security (5.6) • 86
O
145
Index
Selecting functions/options •
31
Sending
key tones • 52
messages • 65
Service light • 16, 90
Setting
alarm (6.4) • 99
date (6.3.2) • 98
language (5.5) • 86
time (6.3.1) • 98
Shortcut (5.9) • 92
SIM card
installing • 17
locking 88
SIM Lock (5.6.5) • 88
SMS
message icon• 62
setup • 68
using • 53, 62
Soft keys • 31
Solving problems • 120
Sound settings (4) • 78
Speed-dialling • 42
Switching on/off
microphone • 51
phone • 23
T
T9 mode • 46
Tasks
defining • 95
editing • 96
Templates (1.4) • 67
Text
changing mode • 45
entering • 44
Text messages
broadcast (1.9) • 71
inbox (1.1) • 62
outbox (1.2) • 63
setting (1.5) • 68
templates (1.4) • 67
write new (1.3) • 65
146
Time
call • 74
format (6.3.4) • 98
setting (6.3.1) • 98
world (6.3.3) • 98
To do list (6.2) • 95
Tone
connect • 82
error • 82
keypad • 79
message • 80
ring • 78
Travel adapter • 19
U
Unpacking • 9
Upper-case characters
entering • 47
User group • 108
V
Vibration • 79
Voice mail (1.8) • 70
Voice server • 71
Volume
adjusting • 26
selecting the ring • 78
W
Waiting call • 53, 106
World time (6.3.3) • 98
Writing memos • 94
Writing messages
text (1.3) • 65
147
➀ Press the Menu soft key.
➄ Press the Select soft key.
➃ Scroll with the
and
keys through the list
of the options until the
required one is selected.
➂ Press the Select soft key.
➁ Scroll with the
and
keys through the list
of the menus until you
reach the required menu.
• Each of the two soft keys (
and
) perform the function indicated by
the text above it (on the bottom line of
the display).
Access the
Menu
Functions
➀ Open the phone and
press the View soft
key.
➁ Scroll with the
and
keys through the
missed calls.
➂ To return the call, press
the
key.
View Missed
Calls
Immediately
After Missing
Them
key.
Briefly press the
➀ Key in the number.
➁ Press the
key.
Make a Call
End a Call
Press and hold the
key.
Switch On/Off
Quick Reference Card
Tri Band SGH-V200C GPRS Telephone
Answer a
Call
Press the
or
key on the
left side of the phone.
Open the phone
or
Press the
key.
➀ Select the Alert Type
menu option (4.3).
Adjust the
Volume
Choose
the Alert
Type
➁ Select an option:
• Light only
• Melody
• Vibration
• Vibra+Melody
➂ Press the Select soft key.
Search for a
Number in
the
Phonebook
Store
Numbers in
the
Phonebook
➀ Press the Name soft
key.
➁ Select the Search
option.
➂ Enter the first few letters
of the name.
➃ To scroll through the
names, press the
or
key.
➄ Press the View soft key.
➅ To scroll through the
numbers, press the
or
key.
➆ Press the
key to dial.
➀ Key in the number.
➁ Press the Save soft key.
➂ Select an icon for label.
➃ Press the Select soft
key.
➄ Enter the name.
➅ Press the OK soft key.
➆ If necessary, change the
memory.
➇ Press the OK soft key.
➈ Press
to return to
idle mode.
148