- Home
- Domestic appliances
- Large home appliances
- Cookers
- Crosley
- 316902601 (1001)
- Operating instructions
advertisement
©© ©© lectric Range
100 control with
Coil Cooktop
TABLE
OF
CONTENTS
Important Safety Instructions ......................
3=5
Before Setting Oven Controls ..........................
6
Before Setting Surface Controls ....................
7-8
Setting Surface Controls (Coil cooktop) ............
9
Oven Control Functions ................................
10
Setting Oven Controls .............................
Care & Cleaning ......................................
Before You Call .......................................
Appliance Warranty ......................................
i0=13
14=17
18=19
20
READ AND SAVE THESE INSTRUCTIONS
p/n 316902601 (1001)
Contents
Product Registration ......................................................
Important Safety Instructions ............................
2
3=5
Before Setting Oven Controls ..................................
6
Removing, replacing & arranging oven racks ................
6
Before Setting Surface Controls ...........................
Cookware material types ............................................
Home Canning ..........................................................
Setting Surface Controls .........................................
Operating surface elements ........................................
Oven Control Functions .........................................
7-8
8
8
9
9
10
Setting Oven Controls ......................................
Setting the clock ......................................................
10-13
10
Changing oven temperature display (F° or C°) ............
10
Setting the minute timer ...........................................
11
Setting bake ...........................................................
Setting broil ............................................................
Adjusting the oven temperature ................................
Operating oven light .................................................
11
12
13
13
Care &Cleaning ...............................................
Cleaning recommendation table ................................
14=17
14
Surface elements and drip bowls ..............................
Cautions for aluminum use .......................................
15
16
Replacing the oven light ...........................................
Removing & replacing oven door ...............................
Before You Call
Solutions to common problems .............................
Appliance Warranty ..............................................
16
17
18-19
20
This Use & Care Manual contains general operating instructions for your range and feature information for several models. Your appliance may not have all the described features. The graphics shown are representational and may not look exactly like those shown.
Congratulations on your purchase of a new range! At
Crosley Corporation, we are very proud of our product and are completely committed to providing you with the best service possible. Your satisfaction is our number one priority.
We know you'll enjoy your new range and Thank You for choosing our product. We hope you consider us for future purchases.
Need help??
Read this Use & Care manual,
It contains instructions to help you use and maintain your range properly.
If you received a damaged range ... immediately contact the dealer (or builder) that sold you the range.
Save time and money.
Check the section titled "Before you call". This section helps step you through some common problems that might occur.
If you do need service, help is only a phone call away. Call customer service at 1=800=944=9044.
Product Registration
Be sure to register your product.
The self-addressed
PRODUCT REGISTRATION CARD should be filled in
completely, signed and returned to Crosley Corporation. To find your product model and serial numbers see the illustrations provided.
Serial plate
location
Serial plate locations: open storage drawer (some models) or remove lower panel
(some models).
Record model & serial numbers here
Purchase date
Model number
Serial number
2
All rights reserved. Printed in the USA
Read all instructions before using this appliance,
Do not attempt to install or operate your appliance until you have read the safety precautions in this manual. Safety items throughout this manual are labeled with a WARNING or CAUTION statement based on the risk type.
Ask your dealer to recommend a qualified technician and an authorized repair service. Know how to disconnect the power to the range at the circuit breaker or fuse box in case of an emergency.
Definitions
_:_ This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
= All ranges can tip.
= Injuryto persons could result.
= Install anti=tipdevice packed with range.
= See Installation Instructions.
WARNING indicates a potentially hazardous situation which, if not avoided, may result in death
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
IMPORTANT indicates installation, operation, maintenance or valuable information that is not hazard related.
To reduce the risk of tipping, the range must be secured by properly installed anti-tip bracket provided with the range. To check if the bracket is installed properly, visually check that rear leveling leg is inserted into and fully secured by the anti-tip bracket by removing lower front panel or storage drawer from the range.
For models equipped with a warmer drawer or lower oven, grasp the top rear edge of the range and carefully attempt to tilt it forward. Refer to the installation instructions for proper anti- tip bracket installation.
Important Safety Instructions
• Remove all tape and packaging before using the
range, Destroy the carton and plastic bags after unpacking the range. Never allow children to play with packaging material.
=Never modify or alter the construction of a range by removing the leveling legs, panels, wire covers, anti=tip brackets/screws, or any other part of the range.
= Remove the oven door from any unused range if it
is to be stored or discarded.
= Proper installation=Be sure your appliance is properly installed and grounded bya qualified technician in accordance with the National Electrical
Code ANSI/N FPA No, 70 latest edition and local electrical code requirements.
Install only per installation instructions provided in the literature package for this range.
• User servicing=Do not repair or replace any part
of the appliance unless specifically recommended in the manuals.
All other servicing should be done only by a qualified technician. This may reduce the risk of personal injury and damage to the range.
Stepping, leaning or sitting on the door or drawers of a range can result in serious injuries
and also cause damage to the appliance. DO NOT allow children to climb or play around the range. The weight of a child on an open oven door may cause the range to tip, resulting in serious burns or other injury.
Never use your appliance for warming or heating the room.
Do not use the oven, warmer drawer or lower
oven (if equipped) for storage.
Save these instructions for future reference,
3
= Storage in or on appliance--flammable
should not be stored in an oven, warmer materials drawer, near surface units or in the storage drawer, This includes paper, plastic and cloth items, such as cookbooks, plasticware and towels, as well as flammable liquids. Do not store explosives, such as aerosol cans, on or near the range.
• DO NOT LEAVE CHILDREN ALONE--children should not be left alone or unattended in the
area where appliance is in use. They should never be allowed to sit or stand on any part of the appliance, including the storage drawer, lower broiler drawer, warmer drawer or lower double oven.
= Do not store items of interest to children in the cabinets above a range or on the backguard of the range. Children climbing on the range to reach items could be seriously injured.
ii ii ii ii
= Do not touch surface heating units or surface cooking elements, areas near these units or elements, or interior surface of the oven. Both surface heating and oven heating elements may be hot even though they are dark in color. Areas near surface cooking units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable materials touch these areas until they have had sufficient time to cool. Among these areas are the cook top, surfaces facing the cook top, the oven vent openings and surfaces near these openings, oven door and oven door window.
ii
• Wear proper apparel=loose=fitting or hanging garments should never be worn while using the appliance.
Do not let clothing or other flammable materials contact hot surfaces.
Do not attempt to operate the range during a
power failure.
If the power fails, always turn offthe range. If the range is not turned off a nd the power resumes, the range will begin to operate again. Once the power resumes, reset the clock and oven function.
= Do not use water or flour on grease fires= smother the fire with a pan lid, or use baking soda, a dry chemical or foam=type extinguisher.
= When heating fat or grease, watch it closely. Fat or grease may catch fire if allowed to become too hot.
Use dry potholders = moist or damp potholders on
hot surfaces may result in burns from steam. Do not let potholders touch hot heating elements. Do not use a towel or other bulky cloth instead of a potholder.
= Do not heat unopened food containers = buildup of pressure may cause container to burst and result in injury.
IMPORTANT
INSTRUCTIONS
FOR USING
YOUR OVEN
• Use care when opening oven door, lower oven door or warmer drawer (if equipped)--Sta nd to the side of the range when opening the door of a hot oven.
Let hot air or steam escape before you remove or replace food in the oven.
Keep oven vent ducts unobstructed.
The oven vent is located under the left rear surface element if your model is equipped with coil elements. The oven vent is located below the backguard for models equipped with ceramic-glass cook tops. Touching the surfaces in this area when the oven is operating may cause severe burns. Also, do not place plastic or heat-sensitive items on or near the oven vent. These items could melt or ignite.
Placement of interior oven racks. Always place oven racks in desired location while oven is cool. If rack must be moved while oven is hot use extreme caution. Use potholders and grasp the rack with both hands to reposition. Do not let potholders contact the hot heating elements in the oven. Remove all utensils from the rack before moving.
Do not use the broiler pan without its insert. The broiler pan and its insert allow dripping fat to drain and be kept away from the high heat of the broiler. Do not
cover the broiler insert with aluminum foil. Exposed fat and grease could ignite.
Protective liners--Do not use aluminum foil to line the oven bottom. Only use aluminum foil as recommended in this manual. Improper installation of these liners may result in risk of electric shock, or fire.
IIvIPORTANTINSTRUCTIONS
YOUR
COIL
RANGE
COOK TOP MODELS
FOR CLEANING
Before manually cleaning any part of the range, be sure all controls are turned OFF and the range is COOL. The range may be hot and can cause burns.
• Clean the range regularlyto keep allparts free of
grease that could catch fire, Pay particular attention to the area around each surface element. Do not allow grease to accumulate.
• Kitchen cleaners and aerosols--Always manufacturer's recommended directions follow the for use,
Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.
= Clean ventilating hoods frequently=Grease should not be allowed to accumulate on the hood or filter.
Follow the manufacturer's instructions for cleaning hoods.
• Protective Liners--Do not use aluminum foil to line surface unit drip bowls, or reflector pans. Only use aluminum foil as recommended in this manual.
Improper installation of these liners may result in risk of electric shock, or fire.
• Hake sure reflector pans or drip bowls are in
place--Absence of these pans or bowls during cooking may subject wiring or components underneath to damage.
IMPORTANT INSTRUCTIONS FOR USING
YOUR COOKTOP
• Know which knob controls each surface heating
unit. Place a pan of food on the unit before turning it on, and turn the unit off before removing the pan.
Use proper pan size--This appliance is equipped with one or more surface units of different sizes. Select utensils having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils will expose a portion of the heating element to direct contact and may result in ignition of clothing.
Proper relationship of utensil to element will also improve efficiency.
Utensil handles should be turned inward and not extend over adjacent surface elements--To reduce the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil, the handle of the utensil should be positioned so that it is turned inward, and does not extend over adjacent surface units.
Never leave surface elements unattended at high heat settings--Boilovers cause smoking and greasy spillovers that may ignite, or a pan that has boiled dry may melt.
Do not immerse or soak removable heating elementsmHeating elements should never be immersed in water. Heating elements clean themselves during normal operation.
Glazed cooking utensils--Only certain types of glass, glass/ceramic, ceramic, earthenware, or other glazed utensils are suitable for cook top service without breaking due to the sudden change in temperature.
Check the manufacturer's recommendations for cook top use.
= When flaming foods under a ventilating hood, turn the fan on.
IHPORTANT
SAFETY NOTICE
The California Safe Drinking Water and Toxic Enforcement
Act requires the Governor of California to publish a list of substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.
Oven vent location
The oven vent is located under the left rear surface element (See Fig. 1). When the oven is on, warm air passes through the vent. This venting is necessary for proper air circulation in the oven and good baking results.
Do not block the oven vent. oven vent located under left rear element
Removing, replacing & arranging racks
To remove - pull the rack forward until it stops. Lift up front of rack and slide out.
To replace - fit the rack onto the guides on the oven walls.
Tilt the front of the rack upward and slide the rack back into place.
Arranging - always arrange the oven racks when the oven is cool (prior to operating the oven).
f
Fig. 1
Types of oven racks
Your range may be equipped with one or more of the oven rack styles shown.
_ flat ha_d_k
Always use oven mitts when using the oven. When using the appliance, oven racks and cooktop will become very hot which can cause burns.
............
--I 11 fl oven _ _.
The flat oven rack or flat handle oven rack (some models) may be used for most cooking needs.
The offset oven rack (some models) is designed to place the base of the rack about 1/2 of a rack position lower than normal. This rack design provides several additional possible locations between the standard positions.
_.-
Fig. 2
Recommended rack positions by food type
Food type
Broiling meats
Cookies, cakes, pies, biscuits & muffins
Frozen pies, angel food cake, yeast, bread and casseroles
Small cuts of meat or poultry
Turkey, roast or ham
Position
See broil
2 or 3
1 or 2
1 or 2
1
Air circulation in the oven
For best baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation and be sure pans and cookware do not touch each other, the oven door, sides or back of the oven cavity. Hot air must be able to circulate around the pans and cookware in the oven for even heat to reach around the food.
Using proper cookware
The size and type of cookware used will influence the setting needed for best cooking results. Be sure to follow the recommendations for using proper cookware as illustrated in Figs. 1 & 2.
Cookware should have flat bottoms that make good contact with the entire surface heating element.
Check for flatness by rotating a ruler across the bottom of the cookware (See Fig. 1).
Fig. 1
Cookware material Lypes
The cookware material determines how evenly and quickly heat is transferred from the surface element to the pan bottom. The most popular materials available are:
Aluminum = Excellent heat conductor. Some types of food will cause it to darken (Anodized aluminum cookware resists staining & pitting).
Copper = Excellent heat conductor but discolors easily (See
Aluminum).
Stainless - Slow heat conductor with uneven cooking results. Is durable, easy to clean and resists staining.
Cast Iron - A slow heat conductor however will retain heat very well. Cooks evenly once cooking temperature is reached.
Porcelain=enamel on metal =Heating characteristics will vary depending on base material.
Glass - Slow heat conductor.
4
• Flat bottom and straight sides.
• Tight fitting lids.
• Weight of handle does not tilt cookware, Cookware is well balanced,
• Cookware size matches the amount of food to be prepared and the size of the surface element,
• Made of material that conducts heat well,
• Easy to clean,
• Always match cookware bottom to element diameter,
• Curved and warped pan bottoms,
......
\
• Cookware overhangs element by more than 1/2" (1.27 cm).
• Cookware is smaller than element.
• Cookware weight is not balanced.
Fig. 2
On indicator lights
Your range is equipped with one or more element on indicator lights located on the control panel just above the surface control knobs (See Fig. 1). The element on indicator light will glow when a surface element is turned
ON. A quick glance at this indicator light after cooking is an easy check to be sure ALL surface controls are turned OFF.
2
OFF on indicator light
I
OFF
_"_ d
Home Canning
Be sure to read and observe all the following points when home canning with your appliance. Check with the USDA
(United States Department of Agriculture) website and be sure to read all the information they have available as well as follow their recommendations for home canning procedures.
Use only quality flat bottom canners when home canning.
Use a straight-edge to check canner bottom (see
"Cookware material types" in the Before setting
surface controls section).
• Use only a completely flat bottom canner with no ridges that radiate from the bottom center when home canning using a ceramic cooktop.
Make sure the diameter of the canner does not exceed :Linch beyond the surface element
markings or burner, It is recommended to use smaller diameter canners on electric coil and ceramic glass cooktops.
• Start with hot tap water to bring water to boil more quickly.
• Use the highest heat seating when first bringing the water to a boil. Once boiling is achieved, reduce heat to lowest possible setting to maintain that boil.
NEVER place or straddle a cooking utensil over 2 different surface cooking elements at the same time. This can cause uneven heating results. For models equipped with a ceramic cooktop, the cooktop could fracture.
Operating surface
elements i o
Surface elements may appear to have cooled after they have been turned off. The element surface may still be hot and burns may occur if the element or the area surrounding the element is touched before it has cooled sufficiently.
• Do not placeflammable itemssuch as plastic salt and pepper shakers, spoon holders or plastic wrappings on top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons could catch fire if placed too close to the surface elements.
Protective liners--Do not use aluminu m foil to line surface drip bowls, or reflector pans. Improper installation of these liners may result in risk of electric shock, or fire. Only use aluminum foil as recommended in this manual.
To operate surface elements:
1.
Place correctly sized cooking utensil on surface element.
2.
Push in and turn the surface control knob in either direction to the desired setting. Start most surface cooking on a higher setting and then turn to a lower setting to finish. The surface control knobs do not have to be set exactly on a particular spot. Use the graphics provided as a guide and adjust the control knob as needed (Fig. 1). Each surface element provides a constant amount of heat at each setting. For more information see the Suggested surface element
settings table (Fig. 2).
3.
When cooking is complete, turn the surface element
OFF before removing the cookware.
7
4 6 dl
Fig. 1
Suggested surface element settings
The suggested settings table provided below are based when cooking with medium-weight aluminum pans with lids. Settings may vary when using other types of pans.
Suggested surface element settings table
Settings Type of cooking
High (hi - 9)
Medium high (7 - 8)
Start most foods, bring water to a boil, pan broiling
Continuea rapid boil, fry, deep fat fry
Medium (med, 5 - 6) Maintain a slow boil, thicken sauces and gravies or steam veg eta b les
Medium low (2 - 4) Keep foods cooking, poach, stew
Low (Io - 1) Keep warm, melt, simmer
Fig. 2
The element on indicator light(s) will glow when one or more surface elements are turned ON. A quick glance at this indicator light when finished surface cooking is an easy check to be sure all surface controls are turned OFF.
o The size and type of utensil used, and the amount and type of food being cooked will influence the surface setting needed for best cooking results.
Do not allowaluminum
0 F F foil, orANY material that can melt to make contact with the surface element,
_____________(_ 9
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
For satisfactory use of your oven, become familiar with the various pad features and functions of the oven as described below.
Feature indicator lights--
These indicator lights show if bake or broil is active.
Bake padIUse to select the bake feature.
O
Broil padI Use to select the variable broil feature.
®
Up and Down arrow pads-Use with the feature or function pads to set oven temperature or adjusting the clock and minute timer.
Timer On/Off padI Use to set or cancel the minute timer.
The minute timer does not start or stop cooking.
Clock Set padI
Use to set the time of day.
Clear Off pad I Use to clear any feature previously entered except the time of day and minute timer.
Press Clear Off to stop cooking.
Setting the clock
When the appliance is first plugged in or when the power supply to the appliance has been interrupted, the display will flash "12:00".
It is recommended to always set the
clock for the correct time of day before using the appliance.
To set the clock:
1.
Press Clock Set once (do not hold key pad down).
2.
Within 5 seconds, press and hold the A or V until the correct time of day appears in the display.
Changing the temperature display mode
(°F or °C)
The electronic oven control is set to display °F (Fahrenheit) when shipped from the factory. The display may be changed to show either Fahrenheit or Celsius oven temperatures.
To change the temperature display mode from °F to
°C (Celsius) or from °C to °F (Fahrenheit).
.
Press and hold Broil (for 6-8 seconds) until F or C appears in the display. At this time the display will show the current temperature display mode whether set for F or C. Before proceeding read the notes below.
2.
Press either A or V key pad to toggle between F
(Fahrenheit) or C (Celsius) mode choices.
3.
To accept the change, wait until the oven control provides the acceptance beep (See Notes below).
.
The display will return to the time of day with the temperature display mode changed the next time the oven is set for bake or broil.
• If at any time during the process of changing the temperature display mode you decide not to change the mode, press the Clear Off key pad once before the acceptance beep.
• The temperature display mode cannot be changed when Bake or Broil is active.
Setting the minute timer
1.
Press TimerOn/Off.
2.
Press the A to increase the time in one minute increments.
Press and hold the A to increase the time in 10 minute increments. The timer can be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If the V pad is pressed first, the timer will advance to 11 hours and 59 minutes.
3.
When the set time has run out, the timer will sound a 3 second tone. 0:00 will show in the display until Timer
On/Off is pressed.
To change the timer while it is in use
While the timer is active and shows in the display, press and hold the A or V to increase or decrease the time remaining.
To cancel the minute timer before the set time has
run out
Press Timer On/Off once.
Setting bake
The oven can be programmed to bake at any temperature from 170°F to 55001: (77°C to 287°C).
The factory preset bake temperature is 350°F (177°C).
To set bake
1.
Press Bake." "appears in the display.
2.
Within 5 seconds, press the A or V • The display will show "350°F (177°C). '' By pressing and holding the A or V, the temperature can then be adjusted in 5°F increments (1°C if the control is set to display
Celsius).
3.
As soon as the A or V pad is released, the oven will begin preheating to the selected temperature.
When the oven reaches the desired baking temperature, the control will beep once.
To change the oven temperature started after bake has
1.
Press Bake.
Visually check the bake temperature and that it needs to be changed.
2.
Press the A or V pad to increase or decrease the set temperature to the desired new oven temperature.
To cancel baking at any time, press Clear Off.
• The minute timer will not start or stop the cooking process. It serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used alone or while using any of the other oven features.
• If another feature is active when the minute timer is active, the minute timer will show in the display. To view information about other active features, press the pad for that feature.
Dark or dull pans absorb more heat than shiny bakeware resulting in dark or overbrowning of foods. It may be necessary to reduce the oven temperature or cook time to prevent overbrowning of some foods. Dark pans are recommended for pies. Shiny pans are recommended for cakes, cookies and muffins.
Setting Broil
Use the broil feature to cook meats that require direct exposure to radiant heat for optimum browning results.
When broiling always remember to arrange the oven racks while oven is still cool.
For medium done steaks, position the oven rack closer to the broil element (positions 4 or 5; Fig. 1).
For well-done foods such as chicken, fish, lobster or thick cuts of meat, position the oven rack further from the broil element.
To set Broil
1.
Arrange the oven rack while oven is still cool. Position the oven rack as needed.
2.
Press Broil.
"----" will appear in display.
3.
Press and hold the A or V until the desired broil setting level appears in the display. Press the A for HI broil orthe V for LO broil. Most foods may be broiled at the HI broil setting. Select the LO broil setting to avoid excess browning or drying of foods that should be cooked to the well-done stage.
4.
For optimum results, preheat oven for 5 minutes
before adding food,
S.
Place the insert on the broil pan (if equipped), then place the food on the broil pan insert (Fig. 2).
6.
Place the broiler pan and insert (if equipped) on the oven rack.
7.
Open the oven door to the broil stop position when broiling.
8.
Broil on one side until food is browned. Turn and broil food on 2nd side.
9.
When broiling is finished press Clear Off.
Fig. 2
Should an oven fire occur, close the oven door and turn the oven OFF. If the fire continues, use a fire extinguisher.
DO NOT put water or flour on the fire. Flour may be explosive.
The broiler pan and the insert (some models) allows
Insert
Broil pan grease to drain and be kept away from the high heat of the broiler. DO NOT use the pan without the insert. DO
NOT cover the insert with aluminum grease could ignite.
foil; the exposed
Always pull the oven rack outto the stop position before turning or removing the food.
Adjusting oven temperature
Your appliance has been factory calibrated and tested to ensure an accurate baking temperature.
For the first few uses, follow your recipe times and temperature recommendations carefully. If you thinkthe oven is cooking too hot or too cool for your recipe times, you can adjust the control so the oven cooks hotter or cooler than the temperature displayed.
To adjust oven temperature
1.
Press & hold the Bake key pad and release after the display shows the factory temperature setting of 00. If the oven temperature has been previously adjusted from the factory setting, the latest adjusted value will appear in the display instead.
2.
You may increase the oven temperature in 5°F increments with each press of the A key pad. You may also adjust the oven temperature downward in 5°F
4.
.
increments with each press of the V key pad (total adjustment range is +35°F to -35 ° F).
To accept the change, wait until the oven control provides the acceptance beep (See Notes below).
The oven temperature adjustment has been accepted by the oven control and the display will return to the time of day.
Operating oven light (some models)
The interior oven light will automatically turn ON when the oven door is opened. Press the oven light switch located on the upper left control panel to turn the interior oven light ON and OFF whenever the oven door is closed.
The interior oven light is located at the upper left rear wall of the oven interior. To change the interior oven light, see
"Changing the oven light" in the Care &cleaning section.
oven light switch
I
f f
//
• If at any time during the process of adjusting the oven temperature feature you decide not to make the change, press the Clear Off key pad once before the acceptance beep.
• The oven temperature adjustment feature can not be modified if Bake or Broil is active.
• The oven temperature adjustment may be made if your oven control has been set for °C (Celsius) temperature display mode. In this case each press of the a or V key pads will adjust in 1°C increments upward (maximum + 18°C) or downward
(maximum -18°C), depending on which arrow key pad is pressed.
• DO NOT USE oven thermometers such as those found
in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40 degrees from actual temperatures.
Cleaning recommendation table
Recommendation Surface type
-
-
Control knobs
Painted pieces body parts
Painted decorativetrim
Aluminum, plasticorvinyltrim
For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-upgrease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to
60 minutes. Rinse with a damp cloth and dry. Do not use abrasive cleaners on any of these materials; they can scratch. To remove control knobs, turn to the OFF position; grasp firmly and pull straight off the shaft. To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place.
Control panel Before cleaning the controlpanel, turn all controls OFF and if needed remove any
Decorative trim (some models) knobs from the panel. Clean using hot, soapy water and a dishcloth.
Be sure to
squeeze excess water from the dishcloth before wiping the control panel; especially when wiping around the controls area. Excess water in or around the controls may cause damage to the appliance. When rinsing, use clean water and a dishcloth and be sure to squeeze excess water from dishcloth before wiping the control panel.
Stainless Steel (some models) Clean heavier soils with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Do not use cleaners with high concentrations of chlorides or chlorine.
Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning stainless steel. Always be sure to wipe the cleaners off from the surface as bluish stains may occur during heating that cannot be removed.
- Oven interior & door liner Gentle scouring with a soapy non-abrasive scouring pad will remove most spots.
Porcelainenamelbroilerpanand Rinse with a 1:1 solution of clear water and ammonia. !f necessary, cover difficult
broiler pan insert (some models) spots with an ammonia-soaked paper towel for 30 to 40 minutes. Rinse with clean water and a damp cloth, and then scrub with a soap-filled non-abrasive scouring pad.
Rinse and wipe dry with a clean cloth. Do not allow food spills with a high sugar or acid content (milk, tomatoes, sauerkraut, fruit juices or pie filling) to remain on the surface; they may cause a dull spot even after cleaning.
The oven interior is porcelain coated and is safe to clean using oven cleaners following manufacturer's instructions. After cleaning, remove any oven cleaner or the porcelain may become damaged during future heating. Do not spray oven cleaner on any electrical controls or switches. Do not spray or allow oven cleaner to build up on the oven temperature sensing bulb. Do not spray cleaner on oven door trim, door gasket, plastic drawer glides, handles or any exterior surfaces of the range.
Clean any soils from the oven frame, the door liner outside the oven door gasket and the small area at the front center of the oven bottom. Clean with hot, soapy water.
Rinse using clean water and a cloth.
Oven racks
Oven door
Remove oven racks from oven before cleaning. Clean by using a mild, abrasive cleaner following manufacturer's instructions.
Rinse with clean water and dry.
Use soap & water to thoroughly clean the top, sides and front of the oven door. Rinse well. You may use a glass cleaner on the outside glass of the oven door. Do not immerse the door in water. Do not spray or allow water or the glass cleaner to enter the door vents. Do not use oven cleaners, cleaning powders or any harsh abrasive cleaning materials on the outside of the oven door.
Surface elements and drip bowls
Do not use spray oven cleaners on the cooktop. See "Surface elements and drip bowls" in the Care & Cleaning section.
General cleaning precautions
•
•
Remember to follow these cleaning precautions:
Allow the oven to cool before cleaning.
Wear rubber gloves when cleaning the appliance manually.
To remove the surface elements and drip bowls
1.
Lift the edge of the drip bowl across from the terminal end. Lift the surface element and drip bowl together just enough to clear the cooktop.
2.
While holding the drip bowl and surface element, gently pull the terminal end out from terminal plug. DO NOT remove hold down clip (if equipped) from the drip bowl.
Before cleaning any part of the range, be sure all controls are turned OFF and the range is cool
- Remove spillovers and heavy soiling as soon as possible. Regular cleanings will reduce the effort required major cleanings later.
DO NOT line the oven walls, bottom, racks or any
other part of the appliance with aluminum foil.
Doing so will destroy heat distribution, produce poor baking results and cause permanent damage to the oven interior (aluminum foil will melt to the interior surface of the oven).
o Ammonia must be rinsed before operating the oven.
Provideadequateventilation.
Hold down / clip
(if equipped)
//Element suppo=
Surface elements and drip bowls
ii ii
Make sure drip bowls are in place - Absence of these bowls during cooking may subject wiring or components underneath to damage.
Never immerse a surface element in water.
Be sure the range is cool before removing surface elements or drip bowls. Be careful not to bend terminal ends when replacing surface elements after cleaning.
Protective liners--Do not use aluminum foil to line surface drip bowls, or reflector pans. Only use aluminum foil as recommended in this manual.
Improper installation of these liners may result in risk of electric shock, or fire.
Surface elements may be unplugged and removed to make cleaning the drip pans easier. The surface elements clean themselves when they are turned on. Food spilled on a hot element will burn off. Food spilled on a COOL element may be cleaned with a damp cloth--any remaining soil will burn off the next time the element is used.
Fig.
i
Cleaning drip bowls
Wash in hot, soapy water or in the dishwasher. Rinse and dry while still warm. Hard to remove, burned on soil can be removed by soaking the drip bowls for about 20 minutes in a lightly diluted liquid cleanser or a solution of ammonia and water (1/2 cup ammonia to 1 gallon of water). A nylon scrubber may be used after soaking. DO NOT use abrasive cleaners or steel wool, they will scratch the surface. Always rinse with clean water and polish dry with a soft cloth.
To replace drip bowls and surface elements
1.
Slide the terminal end on the element through the opening in the drip bowl (See Fig. 1).
2.
Align the element support to rest on the rim inside the drip bowl. If your drip bowl is equipped with a hold down clip, align the element support opposite the terminal end with the slot in the hold down clip, and snap into place.
3.
After the element is positioned in the drip bowl, line up the terminal end with the terminal plug as shown.
4.
Hold the surface element and drip bowl together as level as possible and firmly push the terminal end into the terminal plug. Make sure element terminal is seated properly into terminal plug. Make sure the surface element is level to reduce the hazard of cookware sliding offthe element.
Caution for aluminum use on the cooktop
Aluminum foil - Use of aluminum foil on a hot cooktop can damage the cooktop, Do not use thin aluminum cooking utensils or allow aluminum foil to touch the surface elements under ANY circumstances.
Aluminum utensils - The melting point of aluminum is much lower than that of other metals. Care must be taken when aluminum pots or pans are used on the cooktop.
If aluminum pans are allowed to boil dry when using the cooktop, the utensil may be damaged or destroyed.
Cleaning under lower element (some models)
Cleaning under cooktop (some models)
o When lowering the lift-up range cooktop, grasp the sides with finger-tips only. Be careful not to pinch fingers. DO NOT drop or bend the range cooktop when raising or lowering. This could damage the cooktop surface.
cooktop _"
SU
The oven bake and broil elements may appear to have
cooled after they have been turned OFF. The elements may still be hot and burns may occur if these elements are touched before they have cooled sufficiently.
For models that have a visible lower bake element
ONLY - This bake element was designed to be tilted up using your hand from the front of the bake element for cleaning purposes.
Remove the bottom oven rack before raising the element.
Do not to raise the element more than
4 or 5 inches from the resting position.
Replacing
the
oven light
(some models)
Fig, 1
To raise the cooktop for cleaning (some models)
1.
Grasp the sides and lift from the front (See Fig. 1). Lift-up rods will support the top in a raised position. Only lift the cook top far enough to allow the support rods to snap into place.
2.
Clean underneath using a clean cloth and hot, soapy water.
3.
To lower, hold the cooktop up and gently push backon each rod to release the notched support. Hold the cooktop while slowly sliding the lift rods down into the range frame.
Be sure the range is unplugged and all parts are COOLbefore replacing oven light. Weara leather-faced glove for protection against possible broken glass.
1.
Turn electrical power off at the main source or unplug the range.
2, Replace bulb with a new 40 watt appliance bulb.
3.
Turn power back on again at the main source or plug the appliance back in.
4, The clock will need to be reset (some models). To reset, see "Setting the clock" in this Use & Care Guide.
oven light
Removing and replacing the lift-off oven door
The oven door is heavy. For safe, temporary storage, lay the oven door flat with the inside of the door facing down.
To remove oven door
1.
Open oven door completely (horizontal with floor-Fig.
1).
2.
Remove 2 screws located on the inside of the oven door liner (See A Fig. 2).
3.
Insert the 2 screws into the door hinge holes located on the side of the hinge arm, one into each hinge (See B
Fig,2).
4.
Close oven door until the door stops, (do not force the door to close any further).
The placement of these screws should keep door open in about a 4-5 degree position.
5.
Grasp oven door firmly on both sides and slide door up and off hinges at the same angle (See Fig. 3).
6.
To clean oven door, follow the instructions provided listed in the cleaning chart under "oven door".
To replace oven door
1.
Be sure the hinge arms remain at the 45 degree angle position. Be sure the screws are still locking the hinge arms from moving. If the screws fall out of the hinge holes, the hinge(s) may snap back against the oven frame and could pinch fingers or chip the porcelain finish on the oven front frame.
2.
Hold door at the sides near the top while resting the lower front of door on your knee. Insert the door channels at the bottom of door over the door hinges,
(See Fig. 3).
3.
Allow the door to slide down into the door hinges evenly at the same 45 degree angle. The hinge arms should be inserted into the bottom corners as far as they can go.
4.
Open door completely (horizontal with floor) and remove both screws from holes in door hinges.
5.
Reinstall the 2 screws into the door liner (See C Fig. 2).
6.
If the door is not in alignment with the oven frame, remove door and repeat the above steps.
o¢
Oven door hinge locations with oven door fully open.
about45 _ i
Fig. 1
Fig. 2
"ove
Oven Door
Hinge f
Fig. 3
Special door care instructions - Most oven doors
contain glass that can break, Read the following recommendations;
• Do not close the oven door until all the oven racks are fully in place.
• Do not hit the glass with pots, pans, or any other object.
• Scratching, hitting, jarring or stressing the glass may weaken its structure causing an increased risk of breakage at a later time.
................
_,
Problem
Poor baking results.
Appliance is not level.
_
Solution
- Many factors affect baking results. Hake sure the proper oven rack position is used. Center food in the oven and space pans to allow air to circulate.
Allow the oven to preheat to the set temperature before placing food in the oven. Try adjusting the recipe's recommended temperature or baking time.
If you feel the oven is too hot or cool, see "Adjusting Oven Temperature" section in this Use & Care Guide.
- Be sure floor is level, strong & stable enough to adequately support range.
o If floor is sagging or sloping, contact a carpenter to correct the situation.
Poor installation.
Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of appliance until the rack is level.
Kitchen cabinet alignment may make range appear not level. Be sure cabinets are square & have sufficient room for appliance clearance.
Cannot moveapplianceeasily.
Appliance must be accessible for service,
Surface element too hot or not hot enough,
Surface element does not heat.
Entire appliance does not operate.
Oven portion of appliance does not operate.
Oven light does not work.
- Cabinets not square or are built in too tightly. Contact builder or installer to make appliance accessible.
Carpet interferes with appliance. Provide sufficient space so appliance can be lifted over carpet.
* Incorrect control setting. Be sure the correct control is ON for the element that you are attempting to use.
- Lightweight or warped pans used. Use only flat, evenly balanced, medium or heavyweight cookware. Flat pans heat better than warped pans.
Cookware materials and weight of the material affect heating. Heavy & medium-weight pans heat evenly. Because lightweight pans heat unevenly, foods may burn easily.
The time of day is not set. The time of day must first be set in order to operate the oven. See "Setting the clock" in the Setting Oven Controls section.
Make sure cord/plug is plugged correctly into outlet.
- Service wiring is not complete. Contact your dealer, installing agent or authorized service agent.
Electrical power outage. Check house lights to be sure. Call your local electric company for service.
o Be sure the oven controls are set properly for the desired cooking feature.
See Setting Oven Controls in this manual or read the instructions"Entire appliance does not operate" in this checklist.
_ Be sure the light is secure in the socket. Also see "Replacing the oven light" section.
Problem
Oven smokes excessively during broiling.
Flames inside oven or smoking from oven vent.
F code error (for example F30).
Drip bowls are pitting or rusting (coil
cooktop models only).
Drip bowls are turning color or distorted
(coil cooktop models only).
Solution
_ Incorrect setting. Follow broiling instructions in Setting Oven Controls.
Make sure oven door is opened to broil stop position,
Meat too close to the broil element. Reposition the oven rack to provide proper clearance between the meat & the element. Preheat the broil element for searing.
Neat not properly prepared. Remove excess fat from meat. Cut remaining fatty edges to prevent curling, but do not cut into lean.
Broiler pan and insert wrong side up and grease not draining. Always place insert on the broiler pan with ribs up & slots down to allow grease to drip into pan (some models).
- Grease has built up on oven surfaces. Regular cleaning is necessary when broiling frequently.
Old grease or food spatters cause excessive smoking.
_ Excessive spillovers in oven. For example this will happen for pie spillovers or large amounts of grease left on the oven bottom. Wipe up excessive spillovers before starting oven. If flames or excessive smoke are present see "Broiling" in the Setting Oven Controls section.
clear the display & stop beeping. Try the bake or broil feature again. If the
F code error repeats, remove power from appliance, wait 5 minutes and then repower appliance and set clock for the time of day. Try the bake or broil feature again. If the fault recurs, record fault and call for service.
Foods with acids, such as tomatoes, if allowed to stand in/on bowls will cause corrosiion.
Remove and wash drip bowls as soon as possible after a spill over.
Normal environment. Houses located along sea coasts are exposed to salt air.
Protect bowls as much as possible from direct exposure to salt air.
Bottom surface of cookware extends beyond surface element and touches cooktop surface. This can cause high enough temperatures to discolor the drip bowls. DO NOT use cookware of this type. Pan sizes should be matched to the size of the element. Replacement drip bowls may be purchased from your appliance dealer.
Your appliance is covered by a one year limited warranty.
For one year from your original date of purchase, Crosley Corporation will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided instructions.
In addition to the warranty shown above, ask your dealer about Crosley Extended Limited Warranty that comes to you at no extra charge for the 2nd through the 10th years.
Exclusions
This warranty does not cover the following:
1.
Products with original serial numbers that have been removed, altered or cannot be readily determined.
2.
Product that has been transferred from its original owner to another party or removed outside the USA or
Canada.
3.
Rust on the interior or exterior of the unit.
4.
Products purchased "as-is" are not covered by this warranty.
5.
Food loss due to any refrigerator or freezer failures.
6.
Products used in a commercial setting.
7.
Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not in ordinary household use or used other than in accordance with the provided instructions.
8.
Service calls to correct the installation of your appliance or to instruct you how to use your appliance.
9.
Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it is shipped from the factory.
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs, handles, or other cosmetic parts.
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip charges, or mileage expense for service calls to remote areas, including the state of Alaska.
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors, cabinets, walls, etc.
13. Damages caused by: services performed by unauthorized service companies; use of parts other than genuine Crosley Corporation parts or parts obtained from persons other than authorized service companies; or external causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT
REPAIR OR REPLACEMENTAS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING
WARRANTIES OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR
OR THE SHORTEST PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCHAS PROPERTY DAMAGEAND INCIDENTAL
EXPENSES RESULTING FROMANY BREACH OF THIS WRITTEN LIMITED WARRANTY ORANY IMPLIED
WARRANTY. SOME STATES AND PROVINCES DO NOTALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE
LIMITATIONS OR EXCLUSIONS MAY NOTAPPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS. YOU MAYALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
If You Need
Service
Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period should service be required.
If service is performed, it is in your best interest to obtain and keep all receipts.
Service under this warranty must be obtained by contacting Crosley Corporation at the addresses or phone numbers below.
This warranty only applies in the USA and Canada.
In the USA, your appliance is warranted by Crosley Corporation.
In
Canada, your appliance is warranted by Crosley Canada Corp. Crosley Corporation authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under this warranty must be performed by Crosley
Corporation or an authorized service company. Product features or specifications as described or illustrated are subject to change without notice.
FOR WARRANTY INFORMATION CONTACT:
Canada 800-868-4806
USA 800-944-9044
_
_
FOR PRODUCT INFORMATION CONTACT:
Crosley Corporation
Winston-Salem, NC 27103
2 0
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project