0-R220-GB
7/12/01
10:32 AM
Page 2
DUAL BAND
GSM TELEPHONE
SGH-R220
OWNER’S MANUAL
Some of the contents in this manual may differ from your
phone, depending the software installed, your SIM card
oryour service provider.
World Wide Web
http://www.samsungmobile.com
Printed in Korea
Code No.: GH68-02178A
English. 06/2001. Rev.1.0
Contents
Safety Precautions . . . . . . . . . . . . . . . .
7
Unpacking . . . . . . . . . . . . . . . . . . . . . .
9
Your Phone . . . . . . . . . . . . . . . . . . . . .
10
Phone Layout. . . . . . . . . . . . . . . . . . . . . . . . . .
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Service Light . . . . . . . . . . . . . . . . . . . . . . . . . .
10
12
14
Getting Started . . . . . . . . . . . . . . . . . .
15
Installing the SIM Card and the Battery . . .
Charging a Battery . . . . . . . . . . . . . . . . . . . . .
Switching the Phone On/Off . . . . . . . . . . . . .
15
18
20
Call Functions . . . . . . . . . . . . . . . . . . .
22
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Volume . . . . . . . . . . . . . . . . . . .
Answering or Rejecting a Call . . . . . . . . . . .
Viewing Missed Calls. . . . . . . . . . . . . . . . . . .
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . .
22
24
25
26
28
Entering Text . . . . . . . . . . . . . . . . . . .
35
Changing the Text Input Mode . . . . . . . . . . .
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . .
Using the ABC Mode . . . . . . . . . . . . . . . . . . .
Using the Number Mode . . . . . . . . . . . . . . . .
Using the Symbolic Mode . . . . . . . . . . . . . . .
36
36
38
40
40
3
Contents (continued)
Phonebook . . . . . . . . . . . . . . . . . . . . .
41
Tones . . . . . . . . . . . . . . . . . . . . . . . . .
69
Storing a Phone Number with a Name . . . .
Phonebook Options . . . . . . . . . . . . . . . . . . . .
Searching for and Dialling a Number
in the Phonebook . . . . . . . . . . . . . . . . . . . . . .
Dialling a Number using the Service
Directory or Information Numbers . . . . . . .
41
43
69
70
72
72
73
73
74
74
74
Selecting Functions and Options . . . . . .
48
Example: Selecting an Alert Type . . . . . . . . .
50
Ring Tone (Menu 3-1) . . . . . . . . . . . . . . . . . . .
Melody Composer (Menu 3-2) . . . . . . . . . . . .
Ring Volume (Menu 3-3) . . . . . . . . . . . . . . . . .
Alert Type (Menu 3-4) . . . . . . . . . . . . . . . . . . .
Keypad Tone (Menu 3-5) . . . . . . . . . . . . . . . .
Message Tone (Menu 3-6) . . . . . . . . . . . . . . .
Error Tone (Menu 3-7). . . . . . . . . . . . . . . . . . .
Minute Minder (Menu 3-8). . . . . . . . . . . . . . .
Connect Tone (Menu 3-9). . . . . . . . . . . . . . . .
Settings . . . . . . . . . . . . . . . . . . . . . . .
75
Phone Settings (Menu 4-1) . . . . . . . . . . . . . .
Network Services (Menu 4-2) . . . . . . . . . . . .
Security Settings (Menu 4-3) . . . . . . . . . . . . .
LCD Settings (Menu 4-4) . . . . . . . . . . . . . . . .
Browser Settings (Menu 4-5) . . . . . . . . . . . .
Service Colour (Menu 4-6) . . . . . . . . . . . . . . .
75
80
89
92
93
94
Organiser . . . . . . . . . . . . . . . . . . . . . .
95
46
47
Using the Menus . . . . . . . . . . . . . . . . .
52
Accessing Menu Functions by Scrolling . . .
Accessing Menu Functions by
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . .
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . .
52
Call Records . . . . . . . . . . . . . . . . . . . .
59
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . .
Received Calls (Menu 1-2). . . . . . . . . . . . . . .
Dialled Calls (Menu 1-3) . . . . . . . . . . . . . . . . .
Call Time (Menu 1-4). . . . . . . . . . . . . . . . . . . .
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . .
59
59
60
60
61
Messages . . . . . . . . . . . . . . . . . . . . . .
62
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . .
Read Messages (Menu 2-2). . . . . . . . . . . . . .
Write Messages (Menu 2-3) . . . . . . . . . . . . .
Preset Message List (Menu 2-4) . . . . . . . . . .
Set Up (Menu 2-5). . . . . . . . . . . . . . . . . . . . . .
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . .
62
63
65
66
66
67
4
53
54
Scheduler (Menu 5-1). . . . . . . . . . . . . . . . . . . 95
Alarm (Menu 5-2) . . . . . . . . . . . . . . . . . . . . . . 97
Calculator (Menu 5-3). . . . . . . . . . . . . . . . . . . 99
World Time (Menu 5-4) . . . . . . . . . . . . . . . . . . 101
Clock (Menu 5-5). . . . . . . . . . . . . . . . . . . . . . . 102
Games . . . . . . . . . . . . . . . . . . . . . . . . 103
5
Contents (continued)
Safety Precautions
WWW Services . . . . . . . . . . . . . . . . . . 104
Launching the Browser . . . . . . . . . . . . . . . . .
Exiting the Browser . . . . . . . . . . . . . . . . . . . .
Using Local Bookmarks . . . . . . . . . . . . . . . . .
Opening a Page Directly . . . . . . . . . . . . . . . .
Navigating with the WAP Browser. . . . . . . .
Network Connection Information . . . . . . . . .
104
104
104
105
106
108
Additional Services . . . . . . . . . . . . . . . 109
ALS (Alternate Line Service). . . . . . . . . . . . . 109
Solving Problems . . . . . . . . . . . . . . . . . 111
Reference Information . . . . . . . . . . . . . 114
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . 114
Using the Batteries . . . . . . . . . . . . . . . . . . . . 117
Safety Information . . . . . . . . . . . . . . . . . . . . . 119
Glossary . . . . . . . . . . . . . . . . . . . . . . 123
Index . . . . . . . . . . . . . . . . . . . . . . . . . 127
Quick Reference Card . . . . . . . . . . . . . . 131
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see “Safety
Information” on page 119.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switch off in aircraft
Mobile phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Respect special regulations
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference
or danger (in a hospital for example).
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
6
7
01-R220-GB
7/10/01
9:18 AM
Page 8
Safety Precautions
Unpacking
Qualified service
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Ensure that the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press the
key. Give your
location. Do not end the call until given permission to
do so.
End the call by pressing .
IMPORTANT! Use only SAMSUNG-approved
accessories. The use of any other power accessory
will invalidate any approval or warranty applying to
the phone, and may be dangerous.
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
Your package contains the following items.
Phone
Battery
Travel Adapter
Hand String Owner’s Manual
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Simple hands-free car kit
• Standard battery
• Data kit
• Ear-microphone*
* : Depending on the countr y, this accessory may be
supplied in the standard package.
8
9
Your Phone
Your Phone
Phone Layout
The following illustration shows the main elements
of your phone.
In the menu facility, scroll through the menu
options and phonebook memory.
During a call, adjust the earpiece volume.
In idle mode, adjust the key tone volume.
Service light
Antenna
Earphone
jack
Soft keys
Perform the functions indicated by the text
above them (in the bottom line of the display).
Earpiece
Display
Deletes characters from the display.
In idle mode, allows you to access the WAP
Browser quickly.
Makes or answers a call.
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function or
stores information that you have entered (such
as a name) in the phone or SIM memory.
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle mode
and cancels your input.
Enter numbers, letters and some special
characters.
Microphone
When held down, toggles the Silent mode on
and off.(This feature is not available when the
phone is connected to a optional car kit.).
10
11
Your Phone
Your Phone
Display
Display Layout
Icons
The display comprises three areas.
Icons
Text and
graphic area
Soft key
indications
Area
Description
First line
Displays various icons (see opposite).
Middle lines Display messages, instructions and
any information that you enter
(number to be dialled, for example).
Last line
12
Shows the functions currently
assigned to the two soft keys.Or
shows various types of information,
such as missed calls, call diverting
options, advice of charge information
or the keypad lock icon ( ). This
information varies, depending on
your SIM card, service provider or
current context.
Signal strength: shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Service: appears when a call is in
progress.
New Message: appears when a new
text message has been received.
New Voice Mail: appears when a new
voice mail message has been received.
Vibrator on/Silent mode on: appears
when the Vibrate mode or Silent mode
is active.
Alarm on: appears when you set an
alarm.
Battery strength: shows the level of
your battery. The more bars you see, the
more power you have left.
13
Your Phone
Getting Started
Backlight
The display and keypad are illuminated by a
backlight. When you press any key, the backlight
comes on.
To specify the length of time for which the backlight
is active, set the Backlight menu option (4-1-5); see
page 77 for further details.
Service Light
There are several cases in which the service light
flashes.
• When in service.
To activate or deactivate the service light, set the
Service Light menu option (4-1-6); see page 78.
To select the colour of the service light, set the
Service Colour menu option (4-6); see page 94.
• When an SMS message is received (the light is
orange, only if the Alert type set Light only.).
Installing the SIM Card and the Battery
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your subscription
details (PIN, optional services available and so on).
• Keep all SIM cards out of the reach of small
children.
• The SIM card and its contacts can be easily
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before removing the
battery.
1. If necessary, switch off the phone by holding
down
until the closing animation is displayed.
2. Remove the battery. To do so:
➀ Press and hold down the catch above the
battery on the back of the phone
➁ Slide the battery away, as shown
• When the alarms rings (the light is white).
• When you receive a call (the light is green by
default).
To change the colour, set the phonebook Colour
option; see page 45.
14
①
②
15
Getting Started
Getting Started
3. Slide the SIM card holder in the direction of the
arrow and hold it in this position.
5. Hold the SIM card down and release the holder to
lock it into place.
4. Insert the SIM card under the two tabs, ensuring
that the cut corner is lower left and the gold
contacts of the card face into the phone.
6. Place the battery back on the phone. Slide the
battery up towards the catch until it locks into
place. Make sure that the battery is properly
installed before switching on the power.
Note: If you need to remove the SIM card, carefully
slide the SIM card lock back and take the card
out of the holder.
16
17
Getting Started
Getting Started
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
120minutes.
1. With the battery in position on the phone connect
the lead from the travel adapter to the bottom of
the phone. Check that the arrow on the lead
connector is facing towards the front of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
Note: Do not remove the battery from the phone
while the travel adapter is connected to the
phone.
18
** Warning **
Battery Low
When the battery becomes too weak for the phone
to operate, the phone switches off automatically.
19
Getting Started
Getting Started
Switching the Phone On/Off
1. Hold down
for more than one second to
switch the phone on.
4. When you wish to switch the phone off, hold
down
for more than two seconds.
Note: If “Insert SIM Card” appears on the display,
please check that the SIM card is correctly
inserted. The phone requires a 3 V SIM card.
Please contact your service provider if you
experience any problems.
2. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 0000. For further
details, see page 114.
3. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 115.
The phone searches for your network and when it
finds it, the idle screen, illustrated below, is
displayed.
<SERVICE PROVIDER>
Sat 14 Mar 12:57
Menu
PhoneBook
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (4-1-3); for
further details, refer to page 76.
20
21
Call Functions
Call Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press
.
Note: If you have set the Auto Redial option (4-1-7) to
ON (see page 78) and the person called does not
answer or the line is busy, the number is
redialled automatically up to ten times.
Making International Calls
1. Press and hold down the
key.
The + international prefix appears.
2. Key in the country code, area code and phone
number and press
.
Correcting the Number
To clear...
Then...
The last digit
displayed
Press the
Any other digit
in the number
Press the
or
key
until the cursor ( ❘ ) is immediately to the right of the digit to
be cleared. Press the
soft
key. You can also insert a
missing digit simply by pressing
the appropriate key.
The whole display
22
Ending a Call
When you have finished your call, briefly press
.
Making a Call from the Phonebook
You can store the names and phone numbers of the
people you call regularly in the SIM card memory,
called the phonebook. You then simply select the
required name to recall the associated number. For
further details on the Phonebook feature, refer to
page 41.
You can also quickly dial the numbers stored in SIM
locations 2 to 9, simply by holding down the
corresponding number key.
Redialling the Last Number
soft key.
Hold down the
soft key for
more than one second.
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
1. If there are any characters on the display, press
the
key to return to the idle mode.
2. Press the
key to access the list of the last
numbers dialled.
3. Use the
and
keys to scroll through the
numbers until the required number is displayed.
4. Press the
key to dial the number displayed.
23
Call Functions
Call Functions
Adjusting the Volume
Answering or Rejecting a Call
During a call, if you wish to adjust the earpiece
volume, use the
or
keys.
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
nnnn
((
Accept
Caller’s name or
number
(if available)
))
Reject
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, only the
phone icon flashes.
In idle mode, you can adjust the key tone volume
using the same keys.
Answering a Call
There are two ways to answer an incoming call.
• Press the Accept soft key.
• When the Any-Key Answer menu option is set to
ON, press any key, except
or the Reject soft
key.
Rejecting a Call
To reject a call, press
24
or the Reject soft key.
25
Call Functions
Call Functions
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available. In this way, you can call the
person back, if necessary.
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
To view the missed call immediately, proceed as
follows.
1. Press the View soft key.
2. Press
to highlight the Paste option.
or
3. Press the Select soft key.
4. Change the number as required. Press
to move back through the number.
5. To...
or
Call the number displayed
key.
or
Then press the...
key.
Save soft key and enter
the name and location
required (for further
details, refer to page 41).
Store the number
Then press the...
Scroll through the
missed calls
Edit or delete a missed
call number
1. Press the Options soft key.
Call the number
The number corresponding to the most recent
missed call is displayed, if available.
2. To...
Editing a Missed Call Number
key.
Deleting a Missed Call
Options soft key
(see opposite).
1. Press the Options soft key.
2. Press
or
to highlight the Delete option.
3. Press the Select soft key.
You can press
feature.
at any time to exit the Missed Call
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 59.
26
27
Call Functions
Call Functions
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
To switch the microphone off temporarily, proceed as
follows.
1. Press the Options soft key.
2. Press
or
to highlight the Mute option.
3. Press the OK soft key.
Your correspondent can no longer hear you.
To switch the microphone back on, proceed as
follows.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Unmute
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
1. Press the Options soft key.
2. Press
option.
or
to highlight the Phonebook
3. Press the OK soft key.
4. Enter the start of the name that you wish to find
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
5. To view the highlighted entr y, press the View soft
key.
For a more detailed description of the Phonebook
feature, refer to page 41.
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Call Functions
Call Functions
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (4-2-3) to Activate (see page 85). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
To make a call while you have a call in progress,
proceed as follows.
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
2. Press
to dial the second call.
The first call is automatically put on hold.
Or alternatively, proceed as follows.
1. Put the current call on hold by pressing the
Options soft key and selecting the Hold option.
1. Press
to answer the incoming call.
The first call is automatically put on hold.
2. To switch between the two calls, press the Swap
soft key.
To end a held call, press the Options soft key and
select the End held call option.
3. To end the current call, press
.
You are automatically switched back to any held
calls.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing
.
30
31
Call Functions
Call Functions
Making a Multiparty Call
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
Setting up the Multiparty Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
2. Highlight the required person, by pressing
or
, followed by
.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
4. To return to the multiparty call, press the Options
soft key and select Join.
All the multiparty call participants can now hear
each other.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
Dropping One Participant
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
2. Highlight the required person, by pressing
or
, followed by
.
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the
Select one option.
The list of call participants appears.
32
3. Select the Remove soft key.
The call is ended with that participant, but you
can continue to talk with the other participants.
4. End the multiparty call by pressing
.
33
Call Functions
Entering Text
Muting/Sending Key Tones
These options allow you to turn the key tones off or
on. If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Using the SMS Service
If you receive an SMS (Short Message Service)
message during a call, the message icon (
)
appears in the display.
After you have finished your call, you can read the
message; refer to page 63 for further details.
When storing a name in the phonebook, creating
your personal greeting or scheduling events in your
calendar, you will need to enter text.
You are provided with the following text input
modes.
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter – when you press the
key
once, J, K or L may be displayed. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
ABC mode
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice or
three times until the letter is displayed.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered trademark of Tegic Communications, Inc.
34
35
Entering Text
Entering Text
Changing the Text Input Mode
1. When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator in the lower right corner of the display.
1. When you are in the T9 predictive text input
mode, start entering a word by pressing keys
to
. Press each key only once for one letter.
Example: to enter HELLO in the T9 English mode,
press
,
,
,
and
.
The word that you are typing appears in the display.
It may change with each key that you press.
Save
ABC
Text input mode
indicator:
ABC: ABC mode
NUM: Number mode
: T9 mode
SYM: Symbolic mode
2. Press the right soft key.
The modes available are displayed.
3. Scroll to the required mode, then press the Select
soft key.
Using the T9 Mode
The T9 predictive text input mode allows you to enter
words easily with a minimum of key presses. As you
press each key, the phone selects a letter that makes
up the word that it thinks you are typing, based on a
built-in dictionary. As a new letter is added, the word
changes based on the key that you have pressed.
36
2. Enter the whole word before editing or deleting
any keystrokes.
3. If the word is correct, start entering the next
word.
Otherwise, press
repeatedly to display
alternate word choices for the keys that you have
pressed.
Example: OF and ME both share the sequence
,
. The phone displays the
most commonly used choice first.
4. Complete each word with a space by pressing
the
key.
To type words not found in the T9 mode, change the
text input mode to the ABC mode.
To delete letters, press
. Press and hold down
to erase entire words.
37
Entering Text
Entering Text
There are three shift options:
• Lower Case (no shift indicator)
• Initial Cap ( indicator)
• Caps Lock ( indicator)
Press
one or more times to display the appropriate shift indicator and continue typing normally.
Meet me at
OK
ENG
Shift indicator
Note: To exit the text input mode without saving your
input, press
. The phone returns to the
previous menu level.
2. Select the other letters in the same way.
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on the
same key), just wait for a few seconds for
the cursor to move right automatically, and
then select the next letter.
There are three shift options:
• Lower Case (no shift indicator)
• Initial Cap ( indicator)
• Caps Lock ( indicator)
Press the
key one or more times to display the
appropriate shift indicator in the bottom line of the
display and continue typing normally.
To insert a space, press the
key.
To delete letters, press the
key. Press and hold
down the
key to clear the display.
Using the ABC Mode
Key
Use the
to
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
Note: To display a list of special characters,
press
. See the table on page 39 for
more information on the characters available
using the keys.
38
Characters in the Order Displayed
keys to enter your text.
Upper Case
1
2
3
4
5
6
7
8
9
0
: ;
A B
D E
G H
J K
MN
P Q
T U
WX
0 x
¿
C
F
I
L
O
R
V
Y
<
¡
2
3
4
5
6
S
8
Z
>
1 = “ /
Ä ÆÅ Γ
É ∆
Θ
Λ
Ñ Ö Ø Ξ
7 ΠΣ
Ü Φ
9 ΨΩ
%# £
Lower Case
.
a
d
g
j
m
p
t
w
0
,
b
e
h
k
n
q
u
x
+
?
c
f
i
l
o
r
v
y
(
!
2
3
4
5
6
s
8
z
)
1 - ‘ @:
à ä æå Ç
é è
ì
ñ
7
ù
9
&
ò ö ø
ß
ü
_ $
39
Entering Text
Phonebook
Using the Number Mode
The Number mode enables you to enter numbers in a
text message (a telephone number, for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text entry mode.
Using the Symbolic Mode
The Symbolic mode enables you to enter various
symbols.
You can store phone numbers and their corresponding names in the memory of your SIM card. In
addition, you can store up to 100 numbers and
names in the phone memory. The SIM card and
phone memories, although physically separate, are
used as if they were a single entity, called the
phonebook.
Storing a Phone Number with a Name
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in the phonebook.
1. Key in the number to be stored.
123 456 789
.( ), : ; %!
Save
SYM
To scroll through the symbols available, press
the
or
key. Press the number key
corresponding to the required symbol. The phone
then automatically switches back to the text entry
mode used immediately prior to selecting the
Symbolicmode.
Note: To enter a new line character in a text
message, press the
key in the Symbolic
mode.
40
Notes:
• If you make a mistake while entering a number,
soft key. For further
correct it using the
details, refer to page 22.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
. ‘P’ is displayed to indicate the pause.
2. When you are sure that the number is correct,
press the Save soft key.
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see page 35.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the last memory used to save a number and
name. If that memory is full, the first free location
in the other memory is displayed.
41
Phonebook
Phonebook
Phonebook Options
5. Press the right soft key to toggle between the
phone (To Phone) and card (To Card) memories.
6. If you do not want to save the number and name
in the suggested location, press
to clear the
location number and enter your preferred location
by pressing the number keys.
7. Press OK to store the name and number.
You can access the phonebook options by
pressing the Options soft key, or scroll through
the memory with
or
.
8. To exit, press the
key.
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
Accessing the Options
To access the various phonebook options, proceed as
follows.
1. Press the Options soft key.
The first available option is highlighted.
2. To...
42
Then press the...
Select the
highlighted option
Select soft key.
Highlight a
different option
or
key one or
more times until the
required option is
highlighted.
43
Phonebook
Phonebook
Paste
Memory Status
Allows you to paste the phonebook number into the
normal dialling mode. Use this option to dial a
number similar to one in the phonebook (a different
extension in the same office for example).
This option allows you to check how many names and
phone numbers are stored and how many locations
are still free in the card memory and phone memory.
Use the soft key to change the number as
required (refer to page 22 for further details). When
you are ready to dial, press
.
Alert
Edit
This option allows you to assign a specific ringing
tone to a number and thus distinguish the caller by
the ringing tone. Specific ringing tones can be
assigned to up to five numbers.
Allows you to edit a number and name stored in the
phonebook.
Colour
Erase
Allows you to erase a number and name stored in
the phonebook.
You are asked to confirm that you wish to erase the
name and number from the phonebook by pressing
the Yes soft key.
This option allows you to assign a specific service
light colour to a number and thus distinguish the
caller by the service light colour.
Three colours are available (red, violet and blue) and
they can be assigned to up to five numbers.
If no specific colour is assigned, the service light
flashes in green when you receive a call.
Copy
Allows you to copy a phonebook number to another
location. Use this option to store a number similar to
one already in memory; once copied, edit the number
and store it in another location on the SIM card or in
the phone memory.
44
45
Phonebook
Phonebook
Searching for and Dialling a Number in
the Phonebook
1. When the idle screen is displayed, press the
PhoneBook soft key.
2. If your SIM card provides Service Dialling Number
(SDN) and Information Number services, you will
see the following screen.
1.[Find Entry
2.ServiceDir.
3.n
Iformato
inNumbers
]
Ok
3. Press the OK soft key when Find Entry is
highlighted.
4. Enter the start of the name that you wish to find
and press the Find soft key.
5. To...
Then press the...
View the
highlighted entry
View soft key.
Select a
different entry
or
key one or more
times until the required entr y
is highlighted.
Look for a name
starting with a
different letter
Key labelled with the required
letter.
6. Once you have found the required entry, press
to dial the number.
Dialling a Number using the Service
Directory or Information Numbers
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
When the idle screen is displayed, press the
PhoneBook soft key. You will see the screen
illustrated on page 46.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
Service Dir.: enables you to view the Service
Directory and make calls from it.
Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
46
47
Selecting Functions and Options
Selecting Functions
and Options
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys. Each menu and sub-menu allows you
to view and alter the settings of a particular function.
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
Example:
<SERVICEPROVIDER>
Sat 14 Mar 12:57
Menu
PhoneBook
To view the various functions/options available and
select the one required, proceed as follows.
1. Press the appropriate soft key.
2. To...
Select the:
• Function displayed
or
• Option highlighted
Then press the...
Left soft key.
View the next function
or highlight the next
option in a list
key.
Move back to the
previous function
or option in a list
key.
Move back up one
level in the structure
Exit the structure
without changing
the settings
Right soft key.
key.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
Press the left soft key
to access the menu
feature.
48
Press the right soft
key to access the
Phonebook feature.
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
49
Selecting Functions and Options
Selecting Functions and Options
Example: Selecting an Alert Type
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
4. To select the Alert Type menu, press the Select
soft key.
The current setting is highlighted.
<SERVICE PROVIDER>
Sat 14 Mar 12:57
Menu
PhoneBook
Current setting
1 Light only
2 [Melody
3 Vibration
]
Select
2. Scroll through the menus until you reach the
Tones menu, by pressing
.
Tones
Select
5. Scroll through the list of alert types until the
appropriate one is highlighted, by pressing
or
.
6. Press the Select soft key to confirm your
selection.
3
7. Press the
key to exit the menu structure.
3. To select the Tones menu, press the Select soft
key and press
until you reach the Alert Type.
Alert Type
Melody
Select
50
3.4
51
Using the Menus
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Accessing Menu Functions by Using
Shortcuts
The menus and sub-menus can be accessed by
scrolling or by using the shortcuts.
The menu items (menu, sub-menus and options) are
numbered and can be accessed quickly by using their
shortcut number. The shortcut number is shown in
the bottom-right next to the
soft key on the
display.
Accessing Menu Functions by Scrolling
1. In idle mode, press the Menu soft key to access
the menu facility. Scroll with the
or
keys to reach the required main menu, such as
Tones. Press the Select soft key to enter the
menu.
2. If the menu contains any sub-menus, Ring Tone
for example, you can access them by scrolling
with the
or
keys and pressing the
Select soft key.
If the menu you have selected contains further
options, repeat the same procedure.
3. To...
Scroll through the menus
Confirm the chosen setting
52
Then press the...
or
keys.
Select soft key.
Return to the previous
menu level
soft key.
Exit the menu, without
changing the settings
key.
1. In idle mode, press the Menu soft key to access
the menu facility.
2. Key in the first digit of the shortcut number.
Repeat this for each digit of the shortcut number.
Example: setting the Any-key Answer function
Press the Menu soft key, and key in
,
.
,
,
Menu to enter the menu, 4 for Settings, 1 for
Phone Settings, 4 for Any-key Answer and 2 to
set the Any-key Answer option to ON.
Note: The numbers assigned to each menu option
are indicated in the list on page 54. They may
not match the menu number on the phone. It
depends on the services supported by the SIM
card.
53
Using the Menus
Using the Menus
Menu Map
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
Note: You can only see menu 0, if your SIM card
supports the SIM Application Toolkit. This is a
network feature. Please contact your service
provider for more information.
1. Call Records
1-1
1-2
1-3
1-4
Missed Calls
Received Calls
Dialled Calls
Call Time
1-4-1 Last Call Time
1-4-2 Total Sent
1-4-3 Total Received
1-4-4 Reset Timers
1-5 Call Cost 1
1-5-1 Last Call Cost
1-5-2 Total Cost
1-5-3 Max Cost
1-5-4 Reset Counters
1-5-5 Set Max Cost
1-5-6 Price/Unit
1
54
Page 59
2. Messages
Page 62
2-1 Voice Mail
2-1-1 Connect to Voice Mail
2-1-2 Voice Server Number
2-2 Read Messages
2-3 Write Messages
2-4 Preset Message List
2-5 Set Up
2-5-1 Service Centre
2-5-2 Default Type
2-5-3 Default Validity
2-5-4 Reply Path
2-5-5 Delivery Reports
2-6 Broadcast
2-6-1 Read
2-6-2 Receive
2-6-3 Channel List
2-6-4 Language
3. Tones
3-1
3-2
3-3
3-4
3-5
3-6
3-7
3-8
3-9
Page 69
Ring Tone
Melody Composer
Ring Volume
Alert Type
Keypad Tone
Message Tone
Error Tone
Minute Minder
Connect Tone
Shown only if supported by your SIM card.
55
Using the Menus
Using the Menus
4. Settings
Page 75
4-1 Phone Settings
4-1-1 Greeting Message
4-1-2 Own Number 1
4-1-3 Language
4-1-3-1 Text Language
4-1-3-2 Input Mode
4-1-4 Any-key Answer
4-1-5 Backlight
4-1-6 Service Light
4-1-7 Auto Redial
4-1-8 Auto Answer
4-1-9 Caller ID
4-1-0 Key Lock
4-1-* Reset Settings
4-1-# Active Line 1
4-2 Network Services
4-2-1 Call Diverting 2
4-2-2 Call Barring 2
4-2-3 Call Waiting 2
4-2-4 Network Selection
4-2-5 Line Identification 2
4-2-6 Closed User Group
4-3 Security Settings
4-3-1 PIN Check
4-3-2 Change PIN
4-3-3 Phone Lock
4-3-4 Change Password
4-3-5 SIM Lock
4-3-6 FDN Mode 1
4-3-7 Change PIN2 1
56
4. Settings (continued)
4-4 LCD Settings
4-4-1 Screen Mode
4-4-2 Select Image
4-4-3 LCD Contrast
4-5 Browser Settings 2
4-5-1 Proxy Settings
4-5-2 Current Proxy
4-6 Service Colour
5. Organiser
Page 95
5-1 Scheduler
5-2 Alarm
5-2-1 Daily Alarm
5-2-2 Once Alarm
5-2-3 Weekly Alarm
5-2-4 Alarm Tone
5-3 Calculator
5-4 World Time
5-5 Clock
5-5-1 Set Time
5-5-2 Set Date
5-5-3 Format
1
Shown only if supported by your SIM card.
2
May not be shown or supported by your network service provider.
57
Using the Menus
Call Records
6. Games
Page 103
Via this menu, you can view the phone calls:
• Missed
• Received
• Dialled
Using this menu you can enjoy
popular games with the phone.
7. WWW Services
The WAP Browser feature may
vary, depending on the service provider.
Page 104
The number and name (if available) are displayed
together with the date and time at which the call
was made. You can also view call times and costs.
Missed Calls
Menu 1-1
This option lets you view the last 10 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
Received Calls
Menu 1-2
This option lets you view the last 10 phone calls
received. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
58
59
Call Records
Dialled Calls
Call Records
Menu 1-3
This option lets you view the last 10 numbers dialled.
You can also:
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
Call Cost
Menu 1-5
Note: The options of this menu may vary, depending
on your SIM card.
This network feature lets you view the cost of calls.
The following options are available.
Last Call Cost: cost of the last call made.
Last Call Time: length of the last call.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
will no longer be able to make any calls, except calls
to the emergency services, until you reset the
counter.
Total Sent: total length of all calls made since the
timer was last reset.
Max Cost: maximum cost set via the Set Max
Cost option (see below).
Total Received: total length of all calls received
since the timer was last reset.
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 115) and then press the OK soft key.
Call Time
Menu 1-4
This option lets you view the timers for calls made
and received. The following timers are available.
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 114) and then press the OK soft key.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls. You must first
enter your PIN2 (see page 115) and then press the
OK soft key.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls. You must first enter your PIN2
(see page 115) and then press the OK soft key.
Note: AOC (Advice Of Charge) information may be
displayed in idle mode, depending on your SIM
card or service provider.
60
61
Messages
Messages
Your phone receives voice mail notification messages,
and text messages. Voice mail and the Short
Message Service (SMS) are network services. Please
contact your service provider for more information.
When the
icon appears, you have received new
text messages. If the Alert type is set Light only, the
service light flashes orange.When the
icon
appears, you have received voice mail. If the
message memory is full, an error message is
displayed, the
icon flashes and you cannot
receive any new messages. Use the Delete option in
the Read Messages menu (2-2) to delete obsolete
messages.
Voice Mail
Menu 2-1
This menu provides you with a quick way of
accessing your voice mailbox (if provided by your
network).
Connect to Voice Mail
Before using this feature, you must enter the voice
server number obtained from your service provider
(see the following page). You can then select this
option and simply press the OK soft key to listen to
your messages.
Note: In idle mode, you can access your voice mail
server directly by holding down the
key.
62
Voice Server Number
You can change the voice mail server number.
To...
Then press the...
Enter the server
number
Corresponding number
keys.
Recall a number in
the phonebook
PhoneBook soft key.
Correct a digit
Move the cursor to
the left/right without
clearing the digit
soft key.
or
key.
Note: See page 41 for instructions on how to use the
phonebook.
Read Messages
Menu 2-2
When the Read Messages menu is selected, the
header of the first message is displayed:
• Message number
• Message status (new, old, not sent, sent)
To view this message, press the View soft key. The
screen shows the:
• Sender’s phone number (if sent with the message)
• Date and time at which the message was
received
• Message text
63
Messages
Messages
Write Messages
To scroll through the messages, press the
or
keys. You can choose the following options, by
pressing the Options soft key.
Text Reply: allows you to reply by sending a text
message. You can also:
• Send the message
• Save and send the message
• Save but not send the message
Call back: allows you to call the sender back.
Edit: allows you to edit a message.
Delete: allows you to delete obsolete messages.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Send: allows you to send a message that you have
not already sent.
Send again: allows you to resend a message that
you have already sent.
Note: The options available vary, depending on the
message status (new, old, not sent, sent).
Menu 2-3
Via this menu, you can write and edit text messages
of up to 160 characters.
1. Key in a message. For details on how to enter
text, refer to page 35.
2. After you complete the message, you can select
the following options.
Send Only: allows you to send the message
immediately. You can enter the required
destination.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
3. After selecting the required option, press the
Select soft key.
The display prompts you to enter the destination
number.
4. Enter the phone number and press the OK soft
key.
64
65
Messages
Preset Message List
Messages
Menu 2-4
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list using
the
or
keys. When the required message
number appears, press the Options soft key.
The following options are available.
Edit: allows you to write a new message or edit the
selected preset message.
Note: For further information on how to enter text in
your message, refer to page 35.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delete: allows you to delete the selected preset
message.
Set Up
Menu 2-5
Via this menu, you can set up default SMS
information.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the messages into the selected
format.
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to you.
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Delivery Report: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Broadcast
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
• The phone is in the idle mode
• The Receive option is set to Enable
• The message channel is currently active in the
channel list
If the message is long, press the
one or more times.
66
Menu 2-6
and
keys
67
Messages
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
The following options are available.
Read: lets you view the first message. Scroll through
the message using
or
. At the end of the
message, press the Next soft key to move to the
next message.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: lists all available channels. The
channels currently selected are indicated by an
asterisk (*) beside the name. When you select one of
them, you can edit, enable, disable or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
68
Tones
You can use the Tones menu to customise various
sound settings, such as the:
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an
error or receive a message
Note: The silent mode allows you to turn the various
tones off when discretion is required. Press
and hold down
to toggle between
activating and deactivating the silent mode.
Ring Tone
Menu 3-1
This option allows you to select the required ringing
tone. You can choose between 20 different tones.
Each time you select a tone, it is played for a few
seconds. Three additional options correspond to the
melodies that you can compose, using the Melody
Composer menu option (3-2).
If your SIM card supports the ALS feature, this option
also allows you to select a different ringing tone for
each line, and thus distinguish incoming calls.
69
Tones
Tones
Melody Composer
Menu 3-2
This option allows you to compose your own melody
to be used as the ringing tone.
• Three octaves are available.
• A maximum of 100 notes can be entered.
• You can adjust the length of the notes and add
rests, as required.
To...
Then press the...
Enter a rest
key (press the key
until the rest is of the
required length).
Delete notes
or
key (for
example, the note A
changes to A#, B, C, C#,
and so on in the scale
each time you press
the
key).
Change the length
of a note
key (the length
will be changed each
time you press the key).
Listen soft key.
Composing a Melody
You can compose three melodies.
1. When you access the menu, the names of any
melodies created are displayed. Otherwise,
(Empty) appears. Select the melody that you wish
to create or edit.
2. Press the Select soft key and compose your
melody using the following keys.
To...
70
Then press the...
Enter C, the first note
in the musical scale
key.
Enter D
key.
Enter E
key.
Enter F
key.
Enter G
key.
Enter A
key.
Enter B
key.
Move a note up or
down one octave
key.
key.
Move a note a
semitone up or down
Listen to your melody
Cancel your changes
key.
3. When you are satisfied with your melody, press
the Yes soft key.
4. Enter a title for the melody.
Note: For further details on how to enter
characters, refer to page 35.
You are asked if the melody is to become the
ringing tone.
5. To use the melody as the ringing tone, press the
Yes soft key.
The melody is saved and is played each time your
phone rings. You can also select the melodies
composed via the Ring Tone menu option (3-1).
71
Tones
Tones
Deleting a Melody
Keypad Tone
1. Select the melody that you wish to delete.
2. Press and hold
for a few seconds.
All notes are erased.
This option allows you to select the tone that the
keypad generates when you press a key. The
following options are available.
3. Press the Listen soft key. You are asked to
confirm that you wish to delete the melody by
pressing the Yes soft key.
Ring Volume
Menu 3-3
This option allows you to adjust the ringing volume
to one of seven levels.
Use the
or
keys. The greater the number
of bars, the greater the volume level.
Alert Type
Menu 3-4
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
Menu 3-5
OFF: the keys do not make any sound.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Message Tone
Menu 3-6
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
SMS Tone1 ~ SMS Tone10: the phone uses an
SMS tone. You are provided with ten SMS tones.
Single Beep: the phone beeps once.
Light Only: the service light on the top of the phone
flashes orange.
Melody: the phone rings using the ringing tone
selected via menu option 3-1.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
72
73
Tones
Settings
Error Tone
Menu 3-7
This option allows you to select how the phone
informs you that you have made a mistake. The
following options are available.
OFF: the phone does not beep.
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Phone Settings
Menu 4-1
ON: the phone beeps to indicate an invalid entry.
Greeting Message
Minute Minder
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
Menu 3-8
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call. The
following options are available.
OFF: the phone does not beep.
ON: the phone beeps every minute.
Connect Tone
Menu 3-9
This option allows you to specify whether the phone
should beep when the phone connects to the
network. The following options are available.
To...
Then press the...
Clear the existing message
key and hold it
down until the message
is cleared.
Enter a new message
Appropriate
alphanumeric keys.
For more information on how to enter characters,
refer to page 35.
To go back to the previous menu level without saving
your input, press
.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
74
75
Settings
Settings
Own Number
Any-key Answer
Note: The contents of this menu may vary,
depending on the SIM card.
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Service, you can select a line with
or
.
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
any key, except
and the Reject soft key.
To reject the call, press
or the Reject soft key.
The following options are available.
The following options are available:
ON: you can press any key, except
Edit: allows you to edit name and number.
OFF: you can only press
Erase: allows you to erase name and number.
Backlight
Language
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off. The
following options are available.
You can select the text language. When the
language option is set to Automatic, the language
is automatically selected according to the language
of the SIM card used.
You can also set the default text input mode. For
details on the text input modes available, refer to
page 35.
and Reject.
or the Accept soft key.
Short: the backlight comes on when you press a key
or receive a call and switches off 10seconds after
the last key is pressed.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
OFF: the backlight is not used.
76
77
Settings
Settings
Service Light
Caller ID
This option allows you to select whether or not the
service light on the top of the phone is used. The
following options are available.
You can prevent your phone number from being
displayed on the phone of the person being called.
ON: the service light flashes when the phone is
ready for use.
Note: Some networks do not allow the user to
change this setting.
The following options are available.
OFF: the service light is not used.
Default: the default setting provided by the network
is used.
Auto Redial
Hide Number: your number is not displayed on the
other person’s phone.
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
The following options are available.
ON: the number is redialled automatically.
OFF: the number is not redialled.
Auto Answer
With the Auto Answer function, the phone automatically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Send Number: your number is sent each time you
make a call.
Key Lock
With the key lock function, you can prevent
accedental key pressing.
ON: the key pad is locked.
You can see the lock icon( )is displayed or your
key input doesn’t working in idle mode. To activate
the key pad, press and hold the left soft key. The
keypad is automatically locked if no key is pressed
within around 15 seconds.
OFF: the keypad lock is not used.
Note: This feature is only available when the phone
is connected to a car kit (optional).
78
79
Settings
Settings
Reset Settings
Call Diverting
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
Note: Some call divert options may not be shown if
they are not supported by your network
operator.
1. Select the Reset Settings menu option.
2. Enter the 4-digit phone password.
Note: The password is preset to 0000. To change this
password, refer to page 91.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
Call diverting can be set up in the following ways.
Active Line
Some SIM cards may be used with two subscriber
numbers (network service). This function is available
only if your SIM card supports it.
This menu allows you to select the line to be used
when making calls. However, calls can be answered
on both lines, regardless of the line selected. When
you select a line, the line number appears as an
indicator after the operator/service provider’s names.
When you select the Manual option, you can choose
a line whenever you access the call barring, diverting
and waiting features; the active line is not displayed.
Divert Always: all calls are diverted.
Busy: calls are diverted if you are already on the
phone.
No Reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
Unavailable: calls are diverted if you are busy, do
not answer or cannot be reached.
Cancel All: all call diverting options are cancelled.
Network Services
Menu 4-2
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
80
Note: These options may be different, depending on
the SIM card.
You can specify individual diverting options for each
of the following call types:
• Voice calls only
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
81
Settings
Settings
Example: You can:
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
3. Press the Remove soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pressing
or
until the appropriate
option is highlighted, and then press the Select
soft key.
2. Select the type of calls to be diverted by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
3. Press the Activate soft key to confirm your settings.
4. Enter the number to which the calls are to be
diverted.
To enter the international code, press 0 until the
+ sign is displayed. You can also select a number
in the phonebook or the voice server number, by
pressing the Options soft key, followed by
PhoneBook or Voice Server Number.
5. When you are satisfied, press
or theOK soft
key.
The phone sends your setting to the network and
the network’s acknowledgement is displayed.
To deactivate specific call diverting settings, proceed
as follows.
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
82
Note: When all calls are diverted, one of the
indicators below is displayed on the last line of
the display,if supported by your SIM card.
Divert Line 1: all calls from line 1 are diverted.
Divert Line 2: all calls from line 2 are diverted.
Divert All: all calls from lines 1 and 2 are
diverted.
Call Barring
The call barring network service allows you to
restrict your calls.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Cancel All: all call barring settings are deactivated;
calls can be made and received normally.
83
Settings
To set your call barring options, proceed as follows.
1. Select the type of call barring required by pressing
or
until the appropriate option is
highlighted and then press the Select soft key.
Settings
Change Barring Password: you can set and
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
Once you have entered a new password, you are
asked to confirm it by entering it again.
2. Select the type of calls to be barred by pressing
the
or
key until the appropriate option
is highlighted and then press the Select soft key.
Call Waiting
3. Press the Activate soft key to confirm your
settings.
This network service enables you to be informed when
someone is trying to reach you during another call.
4. Enter your call barring password supplied by your
service provider.
To set your call waiting options, proceed as follows.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call barring settings, proceed
as follows.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
1. Select the type of calls to which the call waiting
option is to be applied by pressing
or
until the appropriate option is highlighted and
then press Select.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
3. Press the Remove soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call barring settings by
selecting the Cancel All option.
To deactivate specific call waiting settings, proceed
as follows.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
84
85
Settings
Network Selection
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
• Set up a preferred list to be used when selecting
a network automatically
Note: You can select a network other than your
home network if it has a valid roaming
agreement with your home network.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
1. When Network Select is displayed, press the
Select soft key.
2. Press
or
until the appropriate option is
highlighted and press the OK soft key.
Settings
Preferred List: allows you to list your preferred
networks to be used when roaming. Your phone uses
the networks in order of appearance in this list,
provided that the network is available.
When you select this option, the current preferred
list is displayed if it already exists (see the procedure
below). Otherwise, the list of available networks is
displayed directly (see Step 2).
1. To...
Scroll through
the preferred list
Then press the...
or
key.
Change an entry in
or
key to highthe preferred list light the required entry,
followed by the Edit soft key.
2. Select the network to be added to the list by
pressing
or
until it is highlighted,
followed by the Select soft key.
The network is added to the list.
If you select Automatic, you are connected to the
first available network in the preferred list when
roaming.
Line Identification
If you select Manual, the phone scans for the
available networks. Go to Step 3.
This option allows you to view the following line
identification settings.
3. Press
or
until the preferred network is
highlighted and press the OK soft key.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
You are connected to that network when roaming.
86
87
Settings
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
Closed User Group (CUG)
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its
employees and wants to restrict outgoing
calls to members of the same team.
Activating a Closed User Group
If you select the Closed User Group menu, you are
asked if you wish to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
Deactivate: deactivates the CUG function.
Index List: lets you list, add or delete CUG index
numbers. The list of cur rent CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
Settings
To...
Scroll through the
existing CUG indexes
Then press the...
or
key.
Add a new CUG index
Options soft key, select
Add and enter the index.
Delete a CUG index
or
key to select
the index to be deleted,
press the Options soft key
and select Delete.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
Security Settings
Menu 4-3
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (also see page 114).
88
89
Settings
Settings
PIN Check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
The following options are available.
Enable: you are required to enter the phone
password when you switch the phone on.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
Disable: you are not asked to enter the phone
password when you switch the phone on.
The following options are available.
Change Password
Enable: you must enter the PIN each time the phone
is switched on.
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
Disable: the phone connects directly to the network
when you switch it on.
Change PIN
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
The password is factory set to 0000. Once you have
entered a new password of up to 4 digits, you are
asked to confirm it by entering it again.
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
Phone Lock
To unlock the SIM, you must enter the SIM lock code.
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
FDN Mode
The password is factory set to 0000. To change the
phone password, refer to the Change Password
menu option (4-3-4).
Once the correct password has been entered, you
can use the phone until you switch it off.
90
The FDN(Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
91
Settings
Settings
to access the normal mode.
The following options are available.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
Clock: The LCD displays an analogue clock. 15
seconds after the last key is pressed.
When the LCDdisplays the clock, press any key to
access the normal mode. If the Key Lock is On, press
an dhold the left soft key
Change PIN2
Select Image
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
This option allows you to select the image to be
displayed when you set the Screen Mode option to
Image Display. You can select one of five images
(Image 1 ~ 5).
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
LCD Contrast
Disable: you can call any number.
LCD Settings
Menu 4-4
This option allows you to adjust the contrast of the
LCD screen. Press
to increase or
to
decrease the contrast.
The LCD Settings menu enables you to set the style
of the LCD display.
Browser Settings
Screen Mode
Note: This menu may not be shown, depending on
your network service provider.
You can select the screen image to be displayed in
idle mode.
Normal Mode: the LCD displays <Service
Provider> and the current time and date.
Image Display: The LCD displays the image
selected via the Select Image option 15 seconds
after the last key is pressed. When the LCD displays
the image, press any key to access the normal mode.
If the Key Lock is On, press an dhold the left soft key
92
Menu 4-5
You can set up several proxies, using the Proxy
Settings menu (4-5-1), and you can designate one
as the current proxy, using the Current Proxy menu
option (4-5-2). The following parameters must be set
for each proxy; they may vary depending on your
service provider. Contact your service provider for
further details.
93
Settings
Proxy Name: name of the proxy server.
WDP Address: IP address required to connect to
the Internet.
Port Number: number of the port to be used to
connect the gateway.
Home URL: URL of your home Web site.
Access Point
• NAS Phone Number: PPP server phone number.
• Login Name: PPPserver login ID (may be optional).
• Password: PPP server password (may be optional).
• Network Type: V.32 Transparent, V.32 NonTransparent, V.110 Transparent or V.110 NonTransparent.
Service Colour
Menu 4-6
There are five colours available for the service light:
normal (green), orange, red, violet and blue.
You can scroll through these colours, by pressing
the
or
key. Press the Select soft key to
select the required colour.
94
Organiser
The Organiser feature enables you to:
• Write your schedule
• Calculate
• Set the current date and time
• Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for
example)
• Find out what time it is in various cities around
the world
Scheduler
Menu 5-1
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
When you access the Scheduler menu, the
following options are available.
Go to date: allows you to enter a particular date and
schedule an event on that date.
View All: shows the events scheduled.
Delete All: deletes all scheduled events.
95
Organiser
To schedule a new event, proceed as follows.
1. When the calendar is displayed, use the
and
keys to select the month, the
and
keys to select the week and the
and
keys to select the day. You can also use the
Go to date menu option to specify the date.
Note: To exit the Calendar screen, press
.
The phone returns to the previous menu
level.
2. Press the OK soft key.
3. Select a schedule type. Four types are available.
Reminder: requires a description and the time.
Call: requires a phone number and the time.
Meeting: requires a description and the time.
Birthday: requires a name and the time.
4. Enter the appropriate information, referring to
page 35 for further details on how to enter text if
necessary.
5. If you wish to set the alarm to ring on the
scheduled date and time, select Yes. Otherwise,
select No.
6. If you selected Yes, set the time for the alarm
and press OK.
Organiser
A check mark is displayed in front of the date in the
calendar to indicate that an event has been scheduled.
If you select such a date, you will see the contents.
Note: If you have scheduled more than one event on
a given day, you can scroll to the required
event by pressing
or
.
The following options are available.
Add: allows you to add new contents.
Delete: deletes the scheduled event.
Move: moves the scheduled event to a new date.
Copy: copies the scheduled event to a new date.
Delete Day: deletes all events scheduled on that
date.
Alarm
Menu 5-2
This option allows you to set the alarm to ring at a
specific time. You can set one or more alarms.
The following alarms are available.
Daily Alarm: the alarm rings every day at the same
time.
Once Alarm: the alarm rings only once and is then
deactivated.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
The Alarm Tone option allows you to select a
specific tone for the alarm.
96
97
Organiser
Organiser
Calculator
To set the alarm, proceed as follows.
1. Select an alarm type by pressing the Select soft
key.
The Set Alarm option allows you to set the alarm
time or days of the week.
You can use the phone as a 9-digit calculator. The
calculator provides the basic arithmetic functions:
addition, subtraction, multiplication, division,
percentages.
To use the calculator, proceed as follows.
2. If you choose Weekly Alarm, select the required
day of the week and press
.
The * symbol appears to indicate that the day is
selected.
To remove it, press
.
You can set more than one day.
3. Enter the second number.
3. Press the OK soft key.
4. Repeat Steps 2 and 3 if necessary.
4. Enter the required time, then press the OK soft
key.
Alarm Activated is displayed.
The alarm icon ( ) appears in the top line of the
display. The service light flashes in white when the
alarm rings. To stop the alarm when it rings, press
the Exit soft key or press any key.
Menu 5-3
1. Enter the first number using the number keys.
2. Press the Operator soft key until you find the
appropriate arithmetic symbol: + (add),
- (subtract), x (multiply), / (divide).
5. To calculate the result to two decimal places,
press the Equal soft key or the
key.
To erase any mistakes or clear the display, press
the
key.
To enter a decimal point, press the
key.
To deactivate the alarm, select Remove Alarm.
Note: If no battery is attached to the phone or the
battery is discharged, when the alarm is to
ring, the alarm does not ring.
98
99
Organiser
Organiser
World Time
Examples:
Expression
12*3+5=
34+57=
45+57=
48-23=
14-23=
68*25=
68*40=
35/14=
98/14=
Key Sequence
12x3+5
(or )
34+57
(or )
45
(or )
48-23
(or )
14
(or )
68x25
(or )
40
(or )
35/14
(or )
98
(or )
10% of 200
10=? % of 100
200x10
10/100
20
10
10% premium of 200 200+10
10% discount of 200 200-10
220
180
square of 4
reciprocal of 8
4x
8/
(or
(or
)
)
Result
41
91
102
25
-9
1700
2720
2.5
7
16
0.12
Note: When you have finished with the calculator,
press
to return to the previous menu level.
100
Menu 5-4
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
cities using the
or
key.
The screen shows the:
• City name
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
To select the time zone in which you are located,
proceed as follows.
1. Select the city corresponding to your time zone by
pressing the
or
keys one or more
times.
The local date and time are displayed.
2. Press the Set soft key.
3. To...
Then press the...
Update the current
date/time with this
new setting
Set Local soft key.
Indicate that the
time zone is currently
using the daylight
saving time
Set DST soft key.
A check mark is shown
next to the time
difference.
Indicate that the
time zone is no longer
using the daylight
saving time
Remove DST soft key
(only available when a
check mark is shown
next to the time
difference).
101
Organiser
Games
Clock
Menu 5-5
Set Time
This option allows you to change the time displayed,
using the 24-hour system.
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (5-4).
Set Date
This option allows you to change the date displayed.
Enter the day, month and year, using the format
specified in the option below.
Format
This option allows you to select the date format:
• DD/MM/YYYY (day, month, year)
• MM/DD/YYYY (month, day, year)
Using this menu you can also enjoy popular games
on the phone.
Scroll to the chosen game and press the Select soft
key.
The following options are available.
Play: allows you to start a game.
Level: appears whenever you can select the level of
the game. You can scan the levels available with the
or
key, and then press the OK soft key.
Configuration: allows you to adjust phone settings,
such as the backlight and sound.
To adjust each setting, highlight the Backlight or
Sound option by pressing the
or
key and
then toggle between ON and OFF by pressing the
On/Off soft key.
Instructions: gives you an explanation of how to
play the game.
You can scroll up or down with the
or
key.
High Score: shows you the game’s high score list.
To stop playing a game, press the
key.
If you record a high score for a given game, the
phone displays the High Score screen when the
game is over.
102
103
WWW Services
WWW Services
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
To access the Bookmark feature, proceed as follows.
1. In idle mode, press the Menu soft key.
2. Press
for WWW Services.
3. Press
for Bookmark.
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (4-1-2).
4. Highlight the required bookmark using the
or
key and press the Select soft key.
Launching the Browser
Three options are available.
Edit: allows you to create or edit a local bookmark.
To launch the browser from the idle mode, press
the
key or press the Menu soft key, followed
by the
and
keys.
Once connected, the home page (or the last page
visited) is displayed. The content depends on the
service provider.
Exiting the Browser
To exit the browser at any time, press the
The idle screen is displayed.
5. Press the Options soft key.
1. Enter the required title (up to 16 characters).
2. Press the OK soft key.
3. Enter the URL address (up to 128 characters).
4. Press the OK soft key.
Go: allows you to open the selected page.
Delete: allows you to delete the selected bookmark.
Opening a Page Directly
key.
Using Local Bookmarks
You can open any Web page by entering its URL
address.
To enter the URL address directly, proceed as follows.
1. In idle mode, press the Menu soft key.
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
2. Press
for WWW Services.
3. Press
for Goto.
4. Enter the URL address and press the Go soft key.
104
105
WWW Services
WWW Services
Navigating with the WAP Browser
Note: The WAP Browser menus may vary,
depending on your version of the browser.
You can surf the Internet using either the phone keys
or the WAP Browser menu.
The following options are available.
Using the Phone Keys
When surfing the Internet, the phone keys function
differently from the phone mode.
To...
Then press the...
Scroll each line of the
content area
or
key.
Reload: reloads the current page.
Home: takes you back at any time to the homepage
of the Wireless Web service provider.
Bookmarks: allows you to load a bookmarked Web
page directly.
Mark Site: adds the current page to your bookmark
list.
Return to the previous
page
key (except on the
homepage).
About Phone.com: shows the version of the WAP
Browser.
Return to the startup
homepage
key and hold it
down anywhere.
Advanced...: gives you access to the following
advanced features. Some features may not be
supported by your network operator.
Using the WAP Browser Menu
Show URL: shows the URL of the current page.
There are various menu options available when
surfing the Wireless Web.
HomePage: moves to the homepage.
To access the WAP Browser menu, proceed as
follows.
Offline Services: allows you to copy and save Web
pages so that you can view them, even if the network
is down.
1. Press
.
A list of menu options appears.
Outbox: stores outgoing requests from the browser
so that they can be processed at a later date.
2. Highlight the required option using the
or
key.
Restart Up.Browser: clears the cache memory and
displays the homepage.
3. Press the OK soft key to select the option.
Encryption: allows you to check and generate the
security key required to contact a server.
4. If necessary, select the secondary option by
pressing the
or
key, followed by OK.
106
107
WWW Services
Entering Text, Numbers, or Symbols
When you are prompted to enter text, the current
text entry mode appears above the right soft key:
abc/Abc/ABC, NUM or SYM 1 ~ 4. To change modes,
press the right soft key until the required mode is
displayed.
abc/Abc/ABC: allows you to enter lower-case and
upper-case letters. You can switch between lowerand upper-case letters by pressing the
key.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the
More soft key.
NUM: allows you to enter numbers.
If you wish to edit text, move the cursor to the
required position, using the
or
keys and
clear the wrong letter by pressing the
key. Then
enter the correct letter.
Network Connection Information
To check the network connection time, press and
hold down the
key. You can see the connection
time on the last line of the content area. The linger
time is one or more minutes (depending on your
service provider). Consequently, if you do not use the
browser for one or more minutes, the network is
disconnected automatically. In this case, you can see
that the connection time is stopped at that point.
The connection time is reset whenever you exit the
browser.
108
Additional Services
ALS (Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to it.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
1. Selecting a Line
With the Active Line menu option (4-1-#), you can
set a line to be used automatically when you make a
call or you can select the line manually for each call.
For further details, refer to page 80.
2. Editing the Line Name
You can edit the name of each line via the Own
Number menu option (4-1-2).
When you edit the name of a line, the name is
displayed, whenever necessary, instead of “Line 1” or
“Line 2”. For further details, refer to page 76.
109
Additional Services
3. Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each line
with the Ring Tone menu option (3-1). See page 69
for further details.
4. Setting Call Diverting Options
You can set up call diverting options for each line, via
the Call Diverting menu option (4-2-1). This service
enables you to divert calls received on a given line to
the number specified. See page 80 for further details.
110
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
• This phone requires a 3 V SIM card. Please contact
your service provider if you experience any
problems.
Phone Locked
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
111
Solving Problems
“No service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was not dialled
• Have you pressed
?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on ( pressed for more
than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you switched off the microphone
( appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
112
Solving Problems
The phone starts beeping and “** Warning **
Battery Low” flashes in the display
• The battery is insufficiently charged. Replace the
battery with a charged one and recharge it.
The audio quality of the call is poor
• Check the signal strength indicator in the display
( ); the number of bars after it indicates the
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
phonebook entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
Then contact your local dealer or SAMSUNG
after-sales service.
113
Reference Information
Reference Information
Access Codes
PIN
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. The PIN is
usually supplied with the SIM card. When the PIN
Check feature is enabled (menu option 4-3-1), the
PIN is needed each time the phone is switched on.
The access codes (except for the PUK and PUK2
codes) can be changed using the Security Settings
menu options (4-3). See page 89 for further details.
Phone Password
The phone password can be set to avoid unauthorised
use of the phone. The password generally supplied
with the phone is 0000. You are advised to change it
before you start using your phone.
Keep the new password secret and in a safe place,
separate from the phone.
114
If you key in an incorrect PIN three times in
succession, key in the PUK and press the OK soft key.
Key in a new PIN and press the OK soft key. Key in
the new PIN again and press the OK soft key.
PIN2
The PIN2, supplied with some SIM cards, is required
to access specific functions, such as call cost
counters. These functions are only available if
supported by your SIM card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the OK soft
key. Key in a new PIN2 and press the OK soft key.
Key in the new PIN2 again and press the OK soft
key.
115
Reference Information
Reference Information
PUK
Using the Batteries
The PUK (Personal Unblocking Key) is required to
change a blocked PIN. The PUK may be supplied with
the SIM card. If not, contact your local service
provider.
Your phone is powered by a rechargeable Li-ion
standard battery.
If you key in an incorrect PUKten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
• Never use any charger or battery that is damaged
in any way.
You cannot change the PUK. If you lose it, contact
your service provider.
PUK2
The PUK2, supplied with some SIM cards, is required
to change a blocked PIN2.
If you key in an incorrect PUK2ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
You cannot change the PUK2. If you lose it, contact
your service provider.
Barring Password
Precautions When Using Batteries
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
• If left unused, a fully charged battery will
discharge itself over time.
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function.
116
117
Reference Information
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
Reference Information
Safety Information
Road Safety
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
118
119
Reference Information
Reference Information
Operating Environment
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a doctor or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• The effect of the GSM transmit/duty cycle on
hearing aids and pacemakers is being
investigated, and there is a potential hazard
associated with use close to such personal
medical electronic devices.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or wher e
blasting operations are in progress.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
120
• Switch off your cellular phone when in aircraft.
The use of cellular phones in aircraft is illegal and
may be dangerous to the operation of the aircraft
or disrupt the cellular network. Failure to observe
these instructions may lead to the suspension or
denial of cellular telephone services to the
offender, legal action or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfil the warranty
obligations and enjoy this product for many years.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal temperature,
moisture can form inside the phone, which may
damage the electronic circuits.
121
Reference Information
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
Emergency Calls
Important! This phone, like any cellular phone, uses
radio signals, cellular and landline
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential communications (medical emergencies for example).
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
122
13-R220-GB
7/13/01
9:01 AM
Page 123
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
ALS (Alternate Line Service)
Capability of associating two alternate lines with one
SIM card. You can make and receive calls on either
line as required.
Call Barring
Ability to restrict outgoing and incoming calls.
Call Diverting
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
123
13-R220-GB
7/13/01
9:01 AM
Page 124
Glossary
Glossary
GSM (Global System for Mobile Communication)
PUK (PIN Unblocking Key)
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Line Identification Services
Roaming
Service allowing subscribers to view or block the
telephone numbers of callers.
Use of your phone when you are outside your home
area (when travelling for example).
Multiparty Calling
SIM (Subscriber Identification Module)
Ability to establish a conference call involving up to
five additional parties.
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM card
against unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
124
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
125
13-R220-GB
7/13/01
9:01 AM
Page 126
Glossary
Index
Soft Keys
Keys marked
and
on the phone, the purpose
of which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
A
ABC text mode • 38
Access codes • 114
Accessories • 9
Active Line (4-1-#) • 80
Alarm (5-2) • 97
Alert Type (3-4) • 45; 50; 72
ALS • 109
Answering
a call• 25
a second call• 31
Any-key Answer (4-1-4) • 77
Auto Answer (4-1-8) • 78
Auto Redial (4-1-7) • 78
B
Backlight • 14; 77
Barring
calls (4-2-2) • 83
password • 85; 116
Batteries
charging • 18
installing • 15
low battery indicator • 19
precautions • 117
Broadcast (2-6) • 67
Browser
settings (4-5) • 93
using (7) • 104
C
Calculator (5-3) • 99
Caller ID (4-1-9) • 79
Calls
answering • 25
a second call • 31
barring (4-2-2) • 83
cost (1-5) • 61
dialled (1-3) • 60
diverting (4-2-1) • 81
emergency • 8; 122
ending • 23
holding • 30; 85
international • 22
making • 22
missed (1-1) • 26; 59
multiparty • 32
received (1-2) • 59
records (1) • 59
126
Calls (continued)
redialling • 23
automatically • 78
rejecting • 25
searching for a number in
the phonebook • 46
time (1-4) • 60
via the phonebook • 41
waiting (4-2-3) • 85
Card
installing SIM • 15
Care • 121
Changing
call barring
password • 85
password (4-3-4) • 91
PIN (4-3-2) • 90
PIN2 (4-3-7) • 92
text modes• 36
Characters
changing modes • 36
entering • 35
Charging batteries • 18
Clock (5-5) • 102
type • 93
Closed User Group
(4-2-6) • 88
Colour
service light• 14; 94
Composer
Melody (3-2) • 70
Conference calls • 32
Connect
to Voice Mail (2-1-1) • 62
Tone (3-9) • 74
Contrast (4-4-3) • 93
Copying phonebook
numbers • 44
Cost of calls• 61
CUG (4-2-6) • 88
D
Date
format (5-5-3) • 102
setting (5-5-2) • 102
Deleting
missed calls • 27
phonebook numbers • 44
schedules • 97
127
13-R220-GB
7/13/01
9:01 AM
Page 128
Index
Dialled Calls (1-3) • 60
Dialling • 22
Display • 12
contrast • 93
icons • 13
language • 76
Diverting calls (4-2-1) • 81
E
Earpiece volume • 24
Editing
messages• 65
missed calls • 27
phonebook numbers• 44
schedules• 97
Emergency calls • 8; 122
Erasing
missed calls • 27
phonebook numbers• 44
schedules• 97
Error Tone (3-7) • 74
F
Fixed Dial Number (FDN)
mode (4-3-6) • 91
Functions
selecting • 48
G
Games (6) • 103
Greeting Message
(4-1-1) • 75
Groups
user • 88
H
Holding calls • 30; 85
I
Icons • 13
Identifying a caller • 79
Image
screen • 92
Index
L
Language (4-1-3) • 76
Last number redialling • 23
automatic • 78
LCD
layout • 12
settings (4-4) • 92
LED indicator • 14
Length of calls • 60
Letters
changing modes• 36
entering • 35
Line
active • 80
identification (4-2-5) • 87
Locking
keypad • 21;79
phone (4-3-3) • 90
SIM card (4-3-5) • 91
Low battery indicator • 19
M
Maintenance • 121
Melody Composer (3-2) • 70
Memory status• 45
Menus • 52-58
Messages
broadcast (2-6) • 67
greeting (4-1-1) • 75
preset (2-4) • 66
reading (2-2) • 63
set up (2-5) • 66
tone (3-6) • 73
voice mail (2-1) • 62
writing (2-3) • 65
Microphone mute • 28
Minute Minder (3-8) • 74
Missed calls (1-1) • 26; 59
Multiparty calls • 32
Mute
key tones • 34
microphone • 28
K
N
Key tones
muting • 34
selecting • 73
sending • 34
volume • 24
Keypad locking • 21;79
Keys • 10; 11
Names
entering • 35
searching/dialling • 46
storing in the
phonebook • 41
Network Selection
(4-2-4) • 86
128
Network Services (4-2) • 80
Numbers
copying phonebook• 44
correcting• 22
editing
missed call• 27
phonebook• 44
entering• 40
erasing phonebook• 44
fixed dial• 91
mode • 40
own• 76
redialling• 23
automatically• 78
searching/dialling• 46
storing• 41
O
Options
selecting • 48
Organiser (5) • 95
Own Number (4-1-2) • 76
P
Password
barring • 116
changing • 84
phone • 114
changing (4-3-4) • 91
Pasting numbers • 44
Phone
Lock (4-3-3) • 90
password • 91; 114
settings (4-1) • 75
Phonebook • 41
alert tone • 45
colours • 45
copying numbers • 44
dialling • 46
editing numbers • 44
erasing numbers • 44
making calls • 23; 46
memory status • 45
options • 43
pasting numbers • 44
ring tones • 45
searching/dialling • 46
storing numbers/
names • 41
PIN • 115
changing (4-3-2) • 90
checking (4-3-1) • 90
PIN2 • 115
changing (4-3-7) • 92
Preset Message
List (2-4) • 66
Problem solving • 111
PUK • 116
PUK2 • 116
R
Read Messages (2-2) • 63
Received calls (1-2) • 59
Records
call (1) • 59
Redialling
automatically • 78
last number • 23
Rejecting calls • 25
Reset Settings (4-1-*) • 80
Ring
tone (3-1) • 69
type • 72
volume (3-3) • 72
Roaming • 86
S
Safety
batteries • 117
information • 119
precautions • 7
Scheduler (5-1) • 95
Screen Mode (4-4-1) • 92
SDN • 47
Searching for names/
numbers • 46
Security (4-3) • 89
Selecting functions/
options • 48
Sending
key tones • 34
messages • 65
Service
colours • 94
dialling numbers
(SDN) • 47
light (4-1-6) • 14; 78
129
13-R220-GB
7/13/01
9:01 AM
Page 130
Index
Settings
alarm • 97
browser • 93
date• 102
language• 76
LCD • 92
network • 80
phone • 75
reset • 80
security • 89
service colour • 94
time • 102
Set Up (2-5) • 66
Silent mode • 11;69
SIM card
installing • 15
locking (4-3-5) • 91
precautions • 15
SMS
see Messages
Soft keys • 48
Solving problems • 111
Switching on/off
microphone• 28
phone• 20
Symbolic mode• 40
U
User groups • 88
V
Vibration • 72
Voice mail • 62
Voice Server Number
(2-1-2) • 63
Volume adjustment
earpiece • 24
keypad • 24
ring (3-3) • 72
W
Waiting
calls • 30; 85
WAP Browser • 93; 104
World Time (5-4) • 101
Write Messages (2-3) • 65
WWW Services (7) • 104
T
Text
changing modes • 36
entering • 35
Time
call (1-4) • 60
format • 102
setting (5-5-1) • 102
world (5-4) • 101
Tone
connect (3-9) • 74
error (3-7) • 74
keypad (3-5) • 73
melody • 70
message (3-6) • 73
ring (3-1) • 69
Travel adapter • 18
T9 mode • 36
130
131
13-R220-GB
132
7/13/01
9:01 AM
Page 132