WIDE
SCREEN
DS2058
Portable DVD Player
Owner’s Manual
WARNINGS AND CAUTIONS
Notice
This Product incorporates copyright protection technology that is protected by method claims
of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver
if the LCD panel or video monitor is used for vehicle information, system control, rear or side
observation or navigation. If the LCD panel or video monitor is used for television reception, video
or DVD play, the LCD panel or video monitor must be installed so that these features will only
function when the vehicle is in “park” or when the vehicle’s parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates
when the vehicle is in gear or when the parking brake is not applied must be installed to the rear
of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor
vehicle.
Licensed under one or more of the following patents:
Patent Numbers: 5,583,936; 6,381,747; 6,516,132; 6,836,549; and 7,050,698.
2
WARNINGS AND CAUTIONS
Placement
• To prevent fire or electric shock, do not expose this appliance to rain or moisture.
• Do not place the set on an unstable cart, stand, tripod, bracket or table to prevent it from falling.
• Keep the unit away from strong magnets, heat sources, direct sunlight, or excessive dust.
• If the unit is brought directly from a cold to a warm location, moisture may condense inside the
unit.
• When you move it from a cold to a warm location, wait for about one hour before operating the
unit, or remove the disc and leave the unit turned on until the moisture evaporates.
Installation
• Ensure that the unit is installed and used in accordance with the instructions and illustrations
provided in this manual.
Objects and Liquids
• Do not push objects of any kind into the unit through openings.
• Do not spill, splash or spray liquid of any kind on or in the system (this may result in a fire or
electric shock).
• Do not place anything heavy on the unit.
• Do not place any open flame sources, such as lighted candles, on the unit.
Ventilation
• To ensure proper ventilation and proper operation, never cover or block the slots and openings
with a cloth or other material.
Disassembly
• Do not attempt to disassemble the case or replace the battery. There is a risk of electric shock
and/or exposure to Laser Radiation. Contact qualified service personnel if your system is in
need of repair.
Cleaning the Unit
• When cleaning, make sure the system is unplugged from the power source.
• Do not use liquid cleaners or aerosol cleaners.
• Use a cloth lightly dampened with water for cleaning the exterior of the DVD Player system
only.
3
WARNINGS AND CAUTIONS
Headphones
• Excessive sound pressure from headphones can cause hearing loss.
• Connect earphones or headphones to the headphone jack with the volume set low and
increase it if required. When earphones or headphones are connected, no sound will be emitted
from the connected speaker system.
Disc
• Do not use irregularly shaped discs such as heart or star-shaped discs as they may cause the
unit to malfunction.
• Do not stick paper, tape or glue on the disc.
• Do not expose the disc to direct sunlight or heat sources such as hot air ducts.
• Do not touch the surface of the disc.
• Handle the disc by its edge.
• Clean the disc by wiping the disc from the center out with a cleaning cloth.
• Remove the disc from the unit and store it in its case after playing.
• Some playback operations of discs may be intentionally fixed by software producers. Since this
unit plays discs according to the disc contents the software producers designed, some playback
features may not be available. Also, refer to the instructions supplied with the discs.
Cleaning and handling the disc.
4
CONTENTS
Warnings and Cautions ....................................................................................................................2
Contents ...........................................................................................................................................5
Introduction .......................................................................................................................................6
Charging the Battery.........................................................................................................................7
Controls and Indicators.....................................................................................................................8
Remote Control Operation..............................................................................................................10
Audio/Video Connections ...............................................................................................................14
System Setup .................................................................................................................................16
Playback .........................................................................................................................................23
Specifications .................................................................................................................................27
Troubleshooting ..............................................................................................................................28
Owner’s Notes ................................................................................................................................30
5
INTRODUCTION
Thank you for selecting the DS2058 Portable DVD Player. The main features include a
10.2” Swivel Screen (16:9 Aspect Ratio) Liquid Crystal Display (LCD) monitor and a DVD Player.
The unit incorporates the latest state-of-the-art electronics and is designed for use in hotels,
offices, homes or vehicles. The unit is constructed to provide years of reliable, trouble-free
service, is compact so that you can take it with you anywhere, and is designed for quick and easy
installation.
Please read the entire instruction manual supplied with this product prior to operation. The
documentation will assist you in installing the system properly to obtain the best equipment
performance. Please save this manual for later use.
Features
• 270-degree rotatable 10.2” LCD Screen
• Two Optional Aspect Ratios 16:9 and 4:3
• Remote Control
• 3.5mm Headphone Jack
• USB slot and SD card slot
• Audio/Video Output Jack
• Audio/Video Input Jack
• Compatible with DVD, VCD, CD, CD-R, DVD-RW, JPEG, Kodak Picture CD, etc.
• Support Playback Control: Play, Pause, Stop, Fast Forward Playback, Fast Reverse
Playback, etc.
• 5 Hour Playback
• Internal Rechargeable Li-Polymer Battery
• Operates with 9-12 VDC Power Supply
Package Contents
1. 1 X Instruction Manual
2. 1 X Remote Control
3. 1 X CR2025 Lithium Battery
4. 1 X AC/DC Adapter
5. 1 X Vehicle DC Power Adapter
6. 1 X AV Cable
6
CHARGING THE BATTERY
The player is powered by a lithium-polymer battery. It has no memory effect and thus it can be
recharged at any time regardless of whether it is fully or partially discharged.
The unit can be recharged when it is powered on or off. When the power is off, it takes about 3
to 4 hours to fully charge the battery. When the power is on, it takes approximately ten hours to
charge the battery. When fully charged, the battery can be used for about five hours.
The unit can be charged using the AC/DC Adapter or the Vehicle DC Power Adapter.
By AC/DC Adapter:
Connect the AC/DC adapter to the DC IN 9-12V jack on the unit, then plug the adapter into
a 120 VAC outlet.
By Vehicle DC Power Adapter:
Plug one end of the Vehicle DC Power Adapter into the DC IN 9-12V jack on the unit, then plug
the other end into the vehicle DC accessory socket of a car.
Do not charge the DVD player in the vehicle when the vehicle is not running.
While the unit is charging, the red charge indicator will flash. When the battery is fully charged, the
red charge indicator will be steadily lit.
Use and Maintenance of the Rechargeable Battery
1. The working temperature of the rechargeable battery is 32 °F (0 °C) to 95 °F (35 °C).
2. Always unplug the unit when it is not being used or charged.
3. If you do not plan to use the unit for an extended period of time (one week or longer), we
recommend that you fully charge the battery. For longer periods of storage, please recharge
the battery at least once every two months to maintain the battery in optimum condition.
4. Once the battery is fully discharged, immediately recharge the battery (regardless of whether
you plan to use the DVD player or not) in order to maximize battery life.
5. Recharge efficiency will degrade when temperatures drop below 50 °F (10°C) or
exceed 95 °F (35 °C).
6. The battery compartment contains a temperature sensor. If the temperature exceeds 104
°F (40 °C) when charging the unit, the power will turn off automatically and the red charge
indicator on the front of the unit will flash. In this case, disconnect the power adapter, wait for
the unit to cool down, then reconnect the power adapter.
7. Heat is produced during charging. This is normal.
8. Do not subject the unit to strong impacts.
9. Keep the unit away from humidity and excessive heat.
10. The battery is not user serviceable. Please contact Audiovox in the event the battery will
not charge.
7
CONTROLS AND INDICATORS
1. SPEAKER OUTPUT
Front View
2. DISPLAY SCREEN
3. RED LED CHARGE INDICATOR
Flashes when the battery is charging.
Steadily lit when the battery is charged.
4. INFRARED REMOTE SENSOR
5. GREEN LED ON/OFF INDICATOR
Steadily lit when the unit is on.
6. DVD/USB/SD BUTTON
Press to switch to available USB or SD/
MMC/MS CARD signal sources, or to
return to the DVD mode.
7. STOP ( ) BUTTON
Press to stop playback.
1
2
1 3 4 5
8. PLAY/PAUSE (
) BUTTON
Press once to pause playback, then press
again to continue playback.
66
7
8
9
10 11
12
13
14
15
16
17
18
9. NEXT (
) BUTTON
Press to skip to the next chapter/track.
10. PREVIOUS (
) BUTTON
Press to skip to the previous chapter/track.
11. VOL + BUTTON
Press to increase the volume.
12. SOURCE BUTTON
Press to switch between DVD mode and
AV input mode.
22
21
20 19
13. VOL - BUTTON
Press to decrease the volume.
14. UP ( ) BUTTON
Press to navigate in the up direction when
a menu is displayed on the screen.
18. FAST REVERSE / LEFT ( ) BUTTON
Press repeatedly for fast reverse playback.
The available speeds are 2X, 4X, 8X, 16X,
and 32X.
Press to navigate in the left direction when
a menu is displayed on the screen.
15. FAST FORWARD / RIGHT ( ) BUTTON
Press repeatedly for fast forward playback.
The available speeds are 2X, 4X, 8X, 16X,
and 32X.
Press to navigate in the right direction
when a menu is displayed on the screen.
19. SETUP BUTTON
Press to enter/exit the setup menu.
16. OK BUTTON
Press to enter a highlighted item in a menu
or to confirm and execute a selection.
20. TITLE BUTTON
Press to view a DVD’s title menu. Press
again to return to the video.
17. DOWN ( ) BUTTON
Press to navigate in the down direction
when a menu is displayed on the screen.
21. DISC COVER
22. OPEN BUTTON
Press to open the disc tray cover.
8
CONTROLS AND INDICATORS
Side View
1. USB Slot
Insert USB device for playback of audio/video
files.
2. SD/MMC/MS Card Slot
Insert SD/MMC/MS card for playback of
audio/video files.
1
2
34 5 6 7
3. 3.5mm HEADPHONE JACK
When headphones are connected, no sound
will be emitted from the speakers.
4. AV OUT JACK
5. AV IN JACK
6. ON/OFF SWITCH
Slide the switch to ON position to turn on the
unit. Slide the switch to OFF position to switch
off the unit.
7. DC IN 9-12V JACK
10.2″ Swivel LCD Screen
The LCD screen is connected to the main body of the player via a rotatable hinge. The screen
can be rotated clockwise horizontally from the beginning position and counterclockwise from the
ending position by 270 degrees. You can open up the screen and rotate it the same time.
Note: Do not rotate the screen beyond its maximum extent. Forcing the screen beyond its
maximum extent will damage the unit.
Beginning Position
Ending Position
9
REMOTE CONTROL OPERATION
BATTERY INSTALLATION/REPLACEMENT
Remove the battery compartment cover according to the
diagram on the right.
1
1. Press the ridged area to the left.
2. At the same time, pull the battery tray out.
3. Remove the old CR2025 battery. Replace it with a new
CR2025 lithium battery on the tray with the positive side
facing upward.
2
4. Replace the cover.
Note: Do not expose the battery to excessive heat.
REMOTE CONTROL FUNCTIONS
1. ANGLE
Press to switch the viewing angles.
1
Note: This function only works with discs
encoded with multiple camera
angles.
2
3
4
5
6
2. FUNCTION
Press to switch between the 16:9 and 4:3
aspect ratios.
7
3. SETUP
Press to enter/exit the Setup Menu.
4. REPEAT
Press to switch the repeat modes.
Note: For VCD2.0 discs, this function is
invalid when the PBC function is
activated.
5. TITLE
Press to view a DVD’s title menu. Press
again to return to the video.
) / UP
6. PREVIOUS (
Press to skip to the previous chapter/track.
Press to navigate in the up direction when
a menu is displayed on the screen.
7. FAST REVERSE (
) / LEFT
Press repeatedly for fast reverse playback.
The available speeds are 2X, 4X, 8X, 16X,
and 32X.
Press to navigate in the left direction when
a menu is displayed on the screen.
10
REMOTE CONTROL OPERATION
12
13
14
8. SUBTITLE
Press repeatedly to switch/show the
subtitle(s) or turn off the subtitle function.
Note: This function only works with discs
encoded with subtitles.
9. PLAY ( )
Press to start a playback or resume normal
playback from fast forward, fast reverse,
slow-motion, frame-by-frame playback,
etc.
10. DIGIT KEYS
The digit keys can be used to input
numbers or make selection of a track, a
chapter, etc.
8
9
11. SOURCE
Press to switch between DVD mode and
AV input mode.
10
12. GOTO
During playback, press to enter the GOTO
menu. In the menu, use the UP/DOWN
direction buttons to select a menu item.
Press ENTER to edit.
Use the digit keys to input a specific track,
disc time, track time, chapter, title, chapter
time or title time to go to directly. Press it
again to exit the GOTO menu.
11
13. MUTE
Press this button to temporarily switch
the sound off. Press it again to switch the
sound on.
14. AUDIO
Press repeatedly to select the audio
languages available on the disc (for DVD).
Press repeatedly to switch the audio
channels available on the disc (for VCD).
Note: This function only works with
discs encoded with different audio
languages.
11
REMOTE CONTROL OPERATION
15
16
17
18
15. A-B REPEAT
Press to repeat a specific section of a disc.
Press this button to mark down the starting
point (A) and press it again to mark down
the ending point (B). The unit will play back
this section over and over again. Press this
button a third time to cancel A-B repeat
and resume normal playback.
Note: Points A and B must be in the same
title/ track.
16. MENU
Press to view the root menu when playing
a DVD.
When playing a disc encoded with the
PBC function, press to display the PBC
menu. Press it again to disable the
PBC function.
19
Note: A VCD2.0 disc has a PBC function
while DVD, VCD1.1, CD-DA, and
MP3 discs have no PBC functions.
) / RIGHT
17. FAST FORWARD (
Press repeatedly for fast forward playback.
The available speeds are 2X, 4X, 8X, 16X,
and 32X.
Press to navigate in the right direction
when menu is displayed on the screen.
18. ENTER
Press to enter a highlighted item in a menu
or to confirm and execute a selection.
19. STEP
Press repeatedly to advance the video
frame by frame. Press Play ( ) to resume
the normal playback.
Note: Applies to DVD, VCD, etc.
12
REMOTE CONTROL OPERATION
20. NEXT (
) / DOWN
Press to skip to the next chapter/track.
Press to navigate in the down direction
when menu is displayed on the screen.
21. STOP ( )
Press once to pause a playback, then
press Play ( ) to continue playback.
Press twice to stop playback.
22. PAUSE ( )
Press to temporarily pause playback;
press it again or press Play ( ) to
resume playback.
20
21
22
23. ZOOM
Press to zoom in/out of a scene. The
available zoom ratios are 2X, 3X, 4X,
1/2, 1/3, and 1/4. In zoomed-in mode, the
direction keys can be used to move the
zooming center.
23
24
Note: Applies to DVD, VCD, etc.
24. OSD
Press repeatedly to display title elapsed
time, title remaining time, chapter elapsed
time or chapter remaining time, or hide
the display.
25
26
25. USB
Press to switch to available USB or SD/
MMC/MS CARD signal sources, or to
return to the DVD mode.
26. VOL+/VOLPress VOL+ to increase the volume.
Press VOL- to decrease the volume.
13
AUDIO/VIDEO CONNECTIONS
Connecting to a TV
Audio/video from this unit can be played on an external TV. To connect this unit to a TV:
1. Use an AV output cable to connect the AV OUT jack on the unit to the video input terminal and
L/R channel audio input terminals of a TV.
Yellow Red White
R
VIDEO
Input
L
AUDIO
Input
TV
2. After the connection has been correctly made, turn on the connected TV and set it to AV
mode. You can then view the video with the connected TV.
14
AUDIO/VIDEO CONNECTIONS
Connecting to an External Audio/Video Source
The unit can play audio/video from an external source. To connect the unit to an external
audio/video source:
1. Use an AV cable to connect the AV IN jack to the video output terminal and L/R channel audio
output terminals of a DVD, VCD, CD, VCR etc.
Yellow Red White
DVD, CD player, etc.
R
VIDEO
Output
L
AUDIO
Output
2. After the connection has been correctly made, switch on the external device.
3. Press SOURCE to switch this player to AV input mode. The external audio/video source will
play on the unit.
15
SYSTEM SETUP
The System Setup menu allows you to personalize the DVD Player settings to your preference.
Once the initial settings are set, they are retained in the DVD player until modified.
MENU OPERATION
1. Press the SETUP button on the remote control to show the Setup Menu.
2. Press the LEFT (
) or RIGHT (
) button to select the GENERAL, AUDIO, VIDEO,
PREFERENCE or PASSWORD setup page.
3. Press the ENTER button to access the setup page. The submenu of the selected page
appears.
4. Press the UP (
yellow.
) or DOWN (
5. Press the ENTER or RIGHT (
6. Press the UP (
yellow.
) or DOWN (
) button to select an item. The item is highlighted in
) button to enter the option list.
) button to select an option. The option is highlighted in
7. Press the ENTER button to confirm, or press the LEFT (
8. Press the UP (
) or DOWN (
9. Press the LEFT (
) button to cancel.
) button to continue to set other items in the submenu.
) button to return to the Setup Menu.
10. Press the SETUP button again to exit the Setup Menu.
GENERAL SETUP PAGE
There are six items in the GENERAL SETUP
PAGE. They are TV DISPLAY, ANGLE MARK, OSD
LANGUAGE, CLOSE CAPTIONS, SCREEN SAVER,
and LAST MEMORY.
--GENERAL SETUP PAGE-TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSED CAPTIONS
SCREEN SAVER
LAST MEMORY
Wide
ON
ENG
OFF
ON
OFF
GO TO GENERAL SETUP PAGE
TV DISPLAY
If the unit is connected to a conventional TV set, select 4:3 PANSCAN or 4:3 LETTERBOX. The
4:3 image will be displayed in full screen in its native aspect ratio. If the unit is connected to a
wide-screen TV set, select 16:9.
Options:
4:3 PANSCAN:
The wide-screen image will be displayed on the screen in its native aspect
ratio with some part on the left and right cut off.
4:3 LETTERBOX: The wide-screen image will be displayed in its native aspect ratio with black
bands on the upper and lower sections of the screen.
16:9:
The wide-screen image will be displayed in full screen in its native aspect
ratio. The 4:3 image will be stretched out horizontally to fit in the screen.
16
SYSTEM SETUP
ANGLE MARK
This function is available when a disc is encoded with multiple camera angles.
Options:
ON:
Enables the Angle Mark function. When a disc with multiple camera angles is playing,
an angle mark will display on the screen. You can then view the video of different
camera angles by pressing the ANGLE button on the remote control.
OFF:
Set this item to OFF to hide the angle mark.
OSD LANGUAGE (On-Screen Display Language)
This function allows you to set the language for the on-screen display.
Options: English, French, Spanish
CLOSED CAPTIONS
This function is available when a disc is encoded with closed captions.
Options:
ON:
Enables the Closed Caption function. When a disc encoded with closed captions, the
closed captions will be shown on the screen.
OFF:
Set this item to OFF to hide closed captions.
You can also press the SUBTITLE button on the remote control to show or hide the closed
captions.
SCREEN SAVER
When the player is not in use for several minutes (for example the disc is paused, stopped etc) a
running DVD logo will move across the LCD screen to protect the LCD screen.
Options:
ON:
Enables the Screen Saver function. If the image remains motionless on the screen for
several minutes, a screen saver will appear on the screen. You can press any key or
button to wake the screen up.
OFF:
Disables the Screen Saver function.
LAST MEMORY
During playback or in a paused status, the Last Memory function will memorize the last playback
time each time you open the disc tray. The next time you insert the same disc and close the disc
tray to load the disc, the unit will play from the memorized point.
Options:
ON:
Enables the Last Memory function.
OFF:
Disables the Last Memory function.
17
SYSTEM SETUP
AUDIO SETUP PAGE
There are two items in the AUDIO SETUP PAGE ANALOG AUDIO and DOLBY DIGITAL.
--AUDIO SETUP PAGE-ANALOG AUDIO
DOLBY DIGITAL
GO TO AUDIO SETUP PAGE
ANALOG AUDIO
DOWNMIX
This function only applies to Dolby AC-3 encoded 5.1-channel discs.
Options:
LT/RT:
The 5.1-channel audio is mixed into the left channel and right channel.
STEREO: The 5.1-channel audio is mixed into a stereo signal.
DOLBY DIGITAL
DUAL MONO
This function only applies to the Dolby AC-3 encoded 2-channel discs.
Options:
STEREO:
The player outputs the left-channel audio and right-channel audio via the left and
right speaker respectively.
L-MONO:
The player outputs the left-channel audio only via both the left and right speaker.
R-MONO:
The player outputs the right-channel audio only via both the left and right speaker.
MIX-MONO: The player outputs the average signal of the left-channel and right-channel audio via
the left speaker and the right speaker.
DYNAMIC
When you watch movies with a large dynamic range at a low volume, you can adjust the dynamic
value up to avoid losing sound details resulting from the low volume.
Options:
Off to Full: Adjust the slider bar to the desired level. To adjust the slider bar, press ENTER, then
press the UP (
) or DOWN (
) button. Press ENTER again to set the level.
18
SYSTEM SETUP
VIDEO SETUP PAGE
There are two items in the VIDEO SETUP PAGE.
They are COLOR SETTING and PANEL QUALITY.
--VIDEO SETUP PAGE-COLOR SETTING
PANEL QUALITY
GO TO VIDEO SETUP PAGE
COLOR SETTING
The COLOR SETTING menu is used to set up the picture quality when connected to an external
TV set.
Options:
SHARPNESS:
Adjusts the edge enhancement of the picture. There are three options: HIGH,
MEDIUM, and LOW.
BRIGHTNESS:
Adjusts the black level in the picture. Press LEFT (
adjust the value, then press ENTER to confirm it.
CONTRAST:
Adjusts the level of the brightest highlights in the picture. Press LEFT (
or RIGHT (
) to adjust the value, then press ENTER to confirm it.
GAMMA:
Adjusts the balance between bright and dark areas in the picture. There are
four options: HIGH, MEDIUM, LOW, and NONE.
HUE:
Adjusts the level of tint balance. Press LEFT (
the value, then press ENTER to confirm it.
SATURATION:
Adjusts the level of color intensity. Press LEFT (
adjust the value, then press ENTER to confirm it.
LUMA DELAY:
Sets the luma delay value. There are two options: 0T and 1T
) or RIGHT (
) or RIGHT (
)
)
) to adjust
) or RIGHT (
) to
PANEL QUALITY
The PANEL QUALITY menu is used to set up the picture quality of the LCD screen.
Options:
SHARPNESS:
Adjusts the edge enhancement of the picture. There are three options: HIGH,
MEDIUM, and LOW.
BRIGHTNESS:
Adjusts the black level in the picture. Press LEFT (
adjust the value, then press ENTER to confirm it.
CONTRAST:
Adjusts the level of the brightest highlights in the picture. Press LEFT (
or RIGHT (
) to adjust the value, then press ENTER to confirm it.
HUE:
Adjusts the level of tint balance. Press LEFT (
the value, then press ENTER to confirm it.
SATURATION:
Adjusts the level of color intensity. Press LEFT (
adjust the value, then press ENTER to confirm it.
19
) or RIGHT (
) or RIGHT (
) or RIGHT (
)
)
) to adjust
) to
SYSTEM SETUP
PREFERENCE PAGE
There are seven items in the PREFERENCE PAGE.
They are TV TYPE, PBC, AUDIO, SUBTITLE, DISC
MENU, PARENTAL, and DEFAULT.
This item is available if there is no disc in the disc
tray, the disc tray is open or the disc in the disc tray is
stopped.
--PREFERENCE PAGE-TV TYPE
PBC
AUDIO
SUBTITLE
DISC MENU
PARENTAL
DEFAULT
NTSC
ON
ENG
ENG
ENG
GO TO PREFERENCE PAGE
TV TYPE
This function matches video output of the unit to the broadcast system of a connected TV. The unit
supports both National Television System Committee (NTSC) and Phase Alternating Line (PAL)
television broadcasting standards.
Options:
PAL:
Select this mode if the connected TV is a PAL system. The video signal of a NTSC disc
will be output in PAL format.
AUTO:
Select this mode if the connected TV is multi-system. The output format of video signal
will be in accordance with the video signal of the disc.
NTSC:
Select this mode if the connected TV is a NTSC system. The video signal of a PAL disc
will be output in NTSC format.
Note: For best performance, this setting should remain at NTSC.
PBC (Play Back Control)
This function only works with discs encoded with PBC function such as VCD 2.0 discs. DVD,
VCD1.1, CD-DA, and MP3 discs have no PBC menu.
Options:
ON:
Activates the PBC function.
OFF:
Disables the PBC function.
AUDIO MENU
This item allows a user to select a preferred audio language. This function only applies to discs
encoded with different audio languages.
Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.
You can also change the audio language by pressing AUDIO on the remote control.
Note: If the selected language is not available for the currently playing disc, the disc’s default
setting is applied.
20
SYSTEM SETUP
SUBTITLE MENU
This item allows a user to select a preferred subtitle language. This function only applies to discs
encoded with subtitles.
Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, Thai, and Off.
You can also change the subtitle language by pressing SUBTITLE on the remote control.
Note: If the selected language is not available for the currently playing disc, the disc’s default
setting is applied.
DISC MENU
This item allows a user to select a preferred disc menu language.
Options: English, French, Spanish, Chinese, Japanese, Korean, Russian, and Thai.
Note: If the selected language is not available for the currently playing disc, the disc’s default
setting is applied.
PARENTAL
This item allows the user to limit the content of movie playback from Kid Safe to Adult. The lower
the value, the more strict the control. Movies rated higher than the level set for the parental lock
can not be viewed without entering the correct password.
Options:
1
KID SAFE
2
G
3
PG
4
PG – 13
5
PGR
6
R
7
NC17
8
Adult
Note: The rating level can be changed only when the correct password is provided.
Note: This function only works with those discs with parental function.
DEFAULT
This item allows a user to restore all the default settings except the settings in the Password
Setup Page and the PARENTAL item.
Options:
RESET: Restores the default settings.
21
SYSTEM SETUP
PASSWORD SETUP PAGE
There are two items in the PASSWORD PAGE. They
are PASSWORD MODE and PASSWORD.
--PASSWORD SETUP PAGE-PASSWORD MODE
PASSWORD
ON
GO TO PASSWORD SETUP PAGE
PASSWORD MODE
You can activate or disable the password function by setting it to ON or OFF. You must key in the
correct password and press ENTER to confirm before you change the option in this item. The
default password is 3308.
PASSWORD
This item allows the user to change the password.
To change the password:
1. Enter the old password in the OLD PASSWORD row.
2. Enter the new password in the NEW PASSWORD row.
3. Enter the new password again in the CONFIRM PWD row.
4. Press the ENTER button to confirm the change.
Note: You may reset the password if you forget the old password by using the default password:
3308.
Note: The default password is 3308. This password is always active even after you have selected
your own password and changed it. To avoid the possibility of others using the default
password to set the parental level and change the password, record this default password
in another area and delete it from this manual.
22
PLAYBACK
DVD BASICS
To get the optimum use out of the DVD Player, make sure you read this section completely.
DVD REGION CODE
The DVD player is preset to a region code at the factory depending on where the DVD player is
sold. A DVD from a different region cannot be played in this unit and the unit will display “WRONG
REGION”.
Region 1 - USA, Canada
Region 2 - Japan, Europe, South Africa, Middle East, Greenland
Region 3 - S. Korea, Taiwan, Hong Kong, Parts of South East Asia
Region 4 - Australia, New Zealand, Latin America (including Mexico)
Region 5 - Eastern Europe, Russia, India, Africa
Region 6 - China
23
PLAYBACK
TYPES OF DISCS YOUR DVD PLAYER WILL PLAY
Your system will play the following types of discs:
• DVD* disc - DVD discs which contain video.
• VCD disc - VCD discs which contain video.
• Audio disc - Audio CDs contain musical or sound content only.
*Note: This system is capable of playing most recordable DVD formats. However, due to the
variety of disc manufacturers and software, playback cannot be guaranteed.
TYPES OF FILES YOUR DVD PLAYER WILL PLAY
Your system will play the following types of files: MPEG, MPEG2, and JPEG.
LOADING AND PLAYING A DISC
Before you load a disc, make sure that it is compatible with the player. Insert the disc with the
label facing up.
The following discs CANNOT be used with this player:
• MiniDisc
• Laserdisc
• Super Audio CD (SACD)
• Blu-ray Disc
To Load and Play a Disc:
1. Slide the power switch to the ON position.
2. Press the OPEN button to open the disc tray
cover.
3. Place a disc in the disc tray with the label side
facing up. Make sure the disc is snapped onto
the hub.
4. Close the disc tray cover. The unit will load and
play the disc.
Press
24
PLAYBACK
USB DEVICE AND MMC/SD/MS CARD PLAYBACK
To play the contents of a USB device or MMC/SD/MS card:
1. Insert a USB device into the USB slot and/or insert a MMC/SD/MS card into the MMC/SD/MS
card slot.
2. Press the USB button on the remote control. The following menu appears:
DVD
MEDIA
3. Press the UP/DOWN button to to select a source (DVD or MEDIA ). The item is highlighted
in yellow.
Note: If no USB drive or memory card is inserted in the unit, the menu will display NO MEDIA
when you select MEDIA.
4. Press the LEFT button. The following menu appears:
DVD
USB
MEDIA
CARD
5. Press the UP/DOWN button to to select a source (USB or CARD). The item is highlighted
in yellow.
6. Press ENTER to enter the corresponding device. You can play back the readable files on
the device.
25
PLAYBACK
KODAK PICTURE CD OR JPEG IMAGE CD PLAYBACK
1. Place a Kodak Picture CD or JPEG image CD in the disc tray. The unit will load the
disc automatically.
2. Press STOP (
) to enter the thumbnail mode to preview the pictures.
3. In the thumbnail mode, press the direction keys to select a picture, then press the ENTER or
PLAY ( ) buttons to start the playback from the selected picture.
4. If playing a Kodak Picture CD, press the direction buttons and then press ENTER to select
Slide Show, Menu, PREV or NEXT at the bottom of the screen.
Slide Show:
Starts slide show playback.
Menu:
Enters the instruction menu for remote key function. In the menu, press
ENTER to turn over to the next menu page and again to exit the instruction
menu.
PREV/NEXT:
Turns over to the previous/next page.
Viewing Files
Play Modes:
Press STOP (
) to enter the thumbnail mode to preview the pictures.
Press PAUSE (
playback.
Press PLAY (
) to pause a playback. Press it again or press PLAY (
) to resume the
) to start a playback or resume to the normal playback.
Skip to the Previous/Next Picture:
Press PREVIOUS (
)/ NEXT (
) to skip to the previous/next picture during playback.
Picture Rotation:
Press LEFT (
) / RIGHT (
during playback.
) to rotate the picture counterclockwise/ clockwise
Zoom In / Out:
During playback, press ZOOM repeatedly to zoom in by 125%, 150% or 200%, or zoom out by
75% or 50%. When the picture is a 50%, press ZOOM to return the picture to its original size.
When the picture is zoomed in, use the direction keys to move the picture.
26
SPECIFICATIONS
Compatible DISC
DVD/VCD/CD
Signal System
PAL/NTSC
Panel Size
10.2 inch
Frequency Response
20 Hz to 20 kHz
Video Output
1 Vp-p 75 Ohm unbalanced
Audio Output
1.2 V (±0.2 V) RMS/10 kOhm
Dynamic Range
≥ 85 dB
Laser
Semiconductor laser, wavelength: 650 nm/795 nm
Power Source
9-12 VDC
Power Consumption
13 W
Operating Temperature
0~35°C
Battery Type
Li-Polymer
27
TROUBLESHOOTING
If your DVD player does not appear to be functioning correctly, check the items below before
contacting Audiovox technical support.
Symptom
No Power
Picture
There is no picture
displayed on the
connected TV.
Sound
There is no sound from
the speakers.
Unable to play a disc
Cause(s)
Remedy
• The adapter is not
connected to the unit
securely or is not connected
to the power supply.
• Connect the adapter to the
DC input jack securely and
then plug the adapter into an
AC outlet (for AC/DC adapter)
or the vehicle DC accessory
socket of a car (for vehicle DC
power adapter).
• The battery needs to be
charged.
• Charge the battery.
• The unit is turned off.
• Make sure the unit is turned on.
• The TV is not connected to
this unit securely with the AV
cable.
• Connect the AV OUT jack of
this unit and the AV IN jack of a
TV securely with an AV cable.
• The volume is set to the
lowest level.
• Turn up the volume.
• The sound is switched off.
• Press MUTE to switch on the
sound.
• The disc is in fast forward/
reverse playback.
• Press PLAY to resume the
normal playback.
• The speakers are cut off
when a headphone is
plugged in.
• Pull out the headphone and the
sound will output through the
built-in speakers.
• This disc is placed in the
disc tray in the wrong way.
• Check that the disc is placed in
the disc tray with its label side
upwards.
• The unit isn’t compatible with
the disc.
• Insert a compatible disc.
See page 24.
• The disc is dirty.
• Clean the disc.
28
TROUBLESHOOTING
Symptom
The remote control does
not function.
The player stops
working when a USB
device or memory card
is inserted into the
player.
Cause(s)
Remedy
• There is no battery in the
remote control.
• Install a CR2025 lithium battery
in the remote control.
• The battery is out
discharged.
• Replace the battery with a new
one.
• The remote control isn’t
pointed to the remote
sensor.
• Make sure that the remote
control is pointed to the remote
control sensor.
• The remote control is out of
its operating area.
• Make sure the remote control is
within the operating area.
• The unit is shut off.
• Turn the unit on.
• The connected USB device
or the memory card is
probably not a certified one.
• The player cannot play any
uncertified USB device or
memory card.
In case the player stops
working, turn it off, disconnect
the power cord from the AC
outlet and unplug the USB
device and/or memory card
from the player. Then, power on
the player again. The player will
resume the normal operation.
29
OWNER’S NOTES
30
90 DAY LIMITED WARRANTY
Applies to Audiovox Video Products
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser
of this product that should this product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within ninety (90) days from the date of
original purchase, such defect(s) will be repaired or replaced with reconditioned product
(at the Company’s option) without charge for parts and repair labor. A game controller, if
supplied, is similarly warranted for ninety (90) days.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the Company at the address shown below.
This Warranty does not extend to the elimination of externally generated static or noise, to
correction of antenna problems, to costs incurred for installation, removal or reinstallation
of the product, or to damage to digital memory/media devices, gaming devices, discs,
speakers, accessories, or electrical systems.
This Warranty does not apply to any product or part thereof which, in the
opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident, or by removal
or defacement of the factory serial number/bar code label(s). THE EXTENT
OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO
THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT,
SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID
BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE
BROUGHT WITHIN A PERIOD OF 12 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR
ANY OTHER WARRANTY. No person or representative is authorized to assume for the Company any liability other than expressed herein in connection
with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion
or limitation of incidental or consequential damage so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788
 1-800-645-4994
128-5556G
31
www.audiovoxproducts.com
© 2011 AUDIOVOX,150 Marcus Blvd. Hauppauge, NY 11788
128-8981