Samsung YP-T9BQB Product specifications

YP-T9J
this manual carefully to ensure proper use of the product and
For Your Safety Read
to avoid any danger or physical damage.
WARNING
Failing to heed the product instructions may cause serious injury.
Product Use
Improper use can result in explosion,
fire or electric shock.
Do not disassemble, repair
or modify this product on
your own.
Do not get the product wet
or drop it in water.
If the product gets wet,
do not switch it on.
Contact a Service Center.
To avoid your hearing damage
Avoid using your player at
high volume levels, as it may
result in permanent
hearing damage.
If you experience ringing in
your ears while using the
earphones, remove the
earphones immediately and
lower the volume.
To avoid a risk of traffic accident
Do not place the product in
damp, dusty or sooty areas,
as it could result in fire or
electric shock.
Do not leave the player in
areas above 35°C(95°F)
(such as a sauna or inside
a parked car).
During hot weather, the
temperature inside a car may
rise up to 80°C(176°F).
2
Do not use the earphones while you are
driving a bicycle, automobile or motorcycle.
It can cause a serious accident and furthermore,
is prohibited by law in some areas.
Using the earphones while walking, in particular,
on a crosswalk, can lead to a serious accident.
Take care not to tangle the earphone cable
around your arms or neighboring objects
while driving, working out or walking, as it
could result in a car accident or other
injuries.
ENG
CAUTION
Failure to follow all instructions lead to physical injuries or damage to the product.
Product Use
Take care to avoid product
malfunction and physical damage.
When wearing the product
around your neck, take
care not to exert excessive
force on the neck string.
Avoid malfunction
Do not cause excessive
impact on the product by
dropping it. Do not place
heavy objects on top of the
product.
Prevent any foreign
particles or dust from
entering into the product.
Management of Important Data
Always use the accessories
provided by or approved by
Samsung.
Be sure to backup
important data.
Do not spray water on the
product. Never clean the
product with chemical
substances such as
benzene or thinner, as it may
cause fire, electric shock or
deteriorate the surface.
Please be aware that we
claim no responsibility for
damage from data loss due
to breakdown, repair or other
causes.
Do not place the product
near magnetic objects, as it
may cause a malfunction.
3
Contents
For Your Safety ..........................................2
Contents .......................................................4
Chapter 3. Multimedia function
Listening to Music ....................................22
Chapter 1. Preparation
Basic Information .......................................6
Components...............................................6
Screen Display Information........................9
Button Functions ......................................10
Charging the battery ................................11
Basic Use ...................................................12
Chapter 2. Loading Your Desired File
Loading Your Desired File ......................16
Installing Samsung Media Studio ............16
Connecting to your PC.............................17
Adding Folders/Files in Samsung
Media Studio ............................................18
Transferring Files to the Player
with Samsung Media Studio ....................20
4
Listening to Music ....................................22
Section Repetition....................................25
Creating Playlist Using
Samsung Media Studio............................26
To Play a Playlist......................................28
Using Music menu ...................................31
Video............................................................34
Video ........................................................34
Using Video menu....................................37
Photo Viewing ...........................................38
Photo Viewing ..........................................38
Using Photo menu ...................................40
Text Viewing ...............................................43
Text Viewing.............................................43
Using Text menu ......................................44
Listening to FM Radio .............................47
Listening to FM Radio..............................47
Setting a Frequency.................................49
To Delete Presets.....................................51
Using FM Radio menu .............................52
Recording ...................................................53
Recording.................................................53
Voice/FM Radio Recording ......................55
Bluetooth ....................................................56
Using Bluetooth........................................56
Using Bluetooth menu..............................62
Game ...........................................................63
Game .......................................................63
Chapter 6. Appendix
Settings ......................................................65
Menu Tree ...................................................76
Product Specifications ............................77
Setting Music ...........................................65
Setting Record .........................................67
Setting Time ............................................68
Setting Display ........................................70
Setting Language.....................................71
Setting System ........................................72
ENG
Chapter 4. Setting
Chapter 5. Troubleshooting
Troubleshooting ........................................74
5
Basic Information
Components
Checking the Accessories
Player
■
6
Earphones
USB Cable
Installation CD
Design of accessories is subject to change for the purpose of improvement, without notice.
ENG
Front, Right Side and Top
Earphone Connection Jack
Neck String Hole
Microphone
Screen Display
Section Repeat(A B)/
Recording Button
Back Button
MENU Button
Power & Play/Pause Button
Move/File Browser Button
Move/Volume Control Button
Select Button
7
Basic Information
Components (Continued)
Bottom and Left Side
USB Connection Port
Hold Switch
Earphone Connection
√ Top
Earphones
8
Basic Information
ENG
Screen Display Information
Music
1
2
3
4
8
9
10
1 Current Time Display
2 Playback Display
3 Play Mode Display
4 Sound Mode Display
5 Music Title Display
8 Bluetooth Display
*The Bluetooth feature can
be applied only for the
appropriate model
(YP-T9B, T9JB).
9 Battery Status Display
10 Current Music Number/
Total Music Number Display
6 Play Status Bar
5
6
Audio Track 1
00:01:42
00:05:06
11 Total Play Time Display
11
7 Play Time Display
4
5
1 Mono/Stereo Display
2 Frequency Display
3 Frequency Location Display
7
FM Radio
1
2
4 Battery Display
3
5 Preset/Manual/Add
Preset/Remove Preset Display
■
NOTE
The screen pictures are for illustration purposes only. The actual screen may differ.
9
Basic Information
Button Functions
Buttons
Functions and Use
■
Press and hold for power on/off.
Press for play/pause.
■
Press to display the menu screen.
■
Press and hold to move to the main menu.
Press to return to the previous stage.
■
■
■
Press and hold to start recording.
Press to set section repetition, stop recording and add to/delete from the playlist.
■
Press to move to the selected menu/confirm and save your selection.
■
Press and hold to quickly scan tracks.
Press to move to the previous track or play the current track from the
beginning.
■
■
■
Press and hold to quickly scan tracks.
Press to move to next track.
■
Press to increase the volume or move to an upper item/menu.
■
Press to reduce the volume or move to a lower item/menu.
■
Push in the direction of the arrow to lock the button functions.
■
10
Fully charge the rechargeable battery before using the
player for the first time or when it has not been used for a
while.
the USB cable to the USB port
1 Connect
( ) on your PC.
ENG
Charging the battery
the other end of the USB
2 Connect
cable to the USB Connection Port on
Screen Display
■
Charging...
■
Fully Charged
the bottom of the player.
1
■
When connected with the USB cable, it takes
about 4 hours for the player to fully charge
although this may vary depending on your PC
environment.
Battery Use
2
■
NOTE
■
Recharge and store within the temperature range
of 5°C~35°C(40°F~95°F).
■
Do not overcharge (longer than 12 hours).
Excessive charging or discharging may shorten
the battery’s life.
■
Battery life naturally shortens slowly over time as
it is a consumable item.
If you are charging the player while it is connected to your Notebook, make sure the Notebook's
battery is also fully charged.
11
Basic Use
Turning the Power On & Off
Turning the Power On
Press and hold the [
■
] button
Power is turned on.
Turning the Power Off
] button
Press and hold the [
■
■
NOTE
Power is turned off.
Power is automatically turned off when none of the buttons have been pressed for a preset
period of time (Default: 1 minute) in the pause mode. √ Page 68
Playing Music
1 Press the [
press the [
2 Press the [
3 Press the [
Audio Track 1
00:01:42
00:05:06
■
12
NOTE
■
■
] button to select <Music> and then
] button.
] button to select the desired music file.
] button.
The music file will begin playing.
Press the [ ] button to move to the sub level.
Press the [BACK] button to move to the previous screen.
ENG
Volume Control
Press the [
] button.
■
You will see a volume control icon.
■
Press the
button to increase the volume or the
button to decrease it.
Audio Track 1
00:01:42
00:05:06
Lock Function
In Hold mode, all buttons are disabled. This function is useful
when you are walking or jogging.
Hold!
1 Push the [HOLD] switch in the direction of the arrow.
the [HOLD] switch in the opposite direction of the
2 Push
arrow to release the Lock function.
13
Basic Use (Continued)
Searching for Files with <File Browser>
Search easily for files using the <File Browser> function.
1 Press the [
2 Press the [
■
] button to select <File Browser>.
] button.
The <File Browser> folder list containing Music, Text, Pictures and
Video appears.
3 Press the [ ] button to select a folder of your choice.
the [ ] button to move to the file list in the
4 Use
selected folder.
■
Use the [
5 Press the [
6 Press the [
■
14
] button to move to the upper step.
] button to select a file of your choice.
] button.
The selected file will start playing.
ENG
Reset Function
If a product malfunction occurs, you can
re-initialize the system.
Press and hold the [MENU] and [A
buttons at the same time.
■
The system will be initialized.
■
Your settings and files will not be affected.
B/ ]
15
Loading Your Desired File
Installing Samsung Media Studio
Before you start!
Use Media Studio to transfer music
files from your PC to the player.
Insert the installation CD provided with the player into the CD-ROM drive.
1 Click <Install now>.
2 Click <NEXT>.
16
■
Media Studio installation starts.
■
An icon is created on the desktop after
installation is complete and Media Studio
starts.
Loading Your Desired File
Connecting to your PC
Use the USB Cable provided when connecting the player to your PC.
ENG
Before you start!
2
1
1 Connect the USB cable to the USB port ( ) on your PC.
the other end of the USB cable to the USB Connection Port on bottom
2 ofConnect
the player.
■
<USB Connected> appears on the screen display of the player.
■
CAUTION
If you connect the player through a USB hub, the connection may be unstable. Please connect the
player to the computer directly.
PC Requirements
The PC system must meet the following minimum specifications:
■
■
■
■
Pentium 300MHz or higher
USB Port 2.0
Windows XP Service Pack 2 or higher
DirectX 9.0 or higher
■
■
■
■
100MB of free hard disc space
CD Rom Drive (2X or higher)
Windows Media Player 10.0 or higher
Resolution 1024 X 768 or higher
17
Loading Your Desired File
Adding Folders/Files in Samsung Media Studio
Media Studio enables you to select and organize files and folders in preparation
for transfer to your player.
[YP-T9[MTP]]
[YP-T9
2
3
3
Please refer to Help for more information on how to use Media Studio.
■
18
Click <MENU> ➝ <Help> ➝ <Help> from the menu on the top of the Media Studio program.
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
1 Media Studio will automatically start when the player is connected to your PC.
■
ENG
Before you start!
If the program does not start automatically, double Click the Media Studio icon on the desktop.
2 Click the desired file icon.
■
Choose the file type you want to transfer by clicking on one of these icons.
■
Click
icon to display music list.
■
Click
icon to display photo list
■
Click
icon to display etc list. The ETC list includes file types (ex: TXT, XOV, etc) other than
music, photo, and video files.
■
Click
icon to display video list.
To add folders
3 Click <Add Folder> on the bottom of Media Studio.
■
The Open Folder window will appear.
4 Select the folder to add and click <OK>.
■
The selected folder is added to the list on the left side the
Media Studio Screen.
4
To add files
3 Click <Add File> on the bottom of Media Studio.
■
The Open window will appear.
4 Select the files to add and click <Open>.
■
The selected files are added to the list.
4
19
Loading Your Desired File
Transferring Files to the Player with Samsung Media Studio
Perform the following steps to transfer files from your PC to the player.
2
[YP-T9[MTP]]
[YP-T9]
3
4
Portable
window
■
Music recognition technology and related data are provided by Gracenote and
Gracenote CDDB® Music Recognition ServiceSM.
■
CDDB is a registered trademark of Gracenote. The Gracenote logo and logotype, the Gracenote
CDDB logo and logotype, and the "Powered by Gracenote CDDB" logo are
trademarks of Gracenote. Music Recognition Service and MRS are service marks of Gracenote.
NOTE
20
■
■
Connect the player to your PC.
Media Studio must be installed on your PC.
ENG
Before you start!
1 Media Studio will automatically start when the player is connected to your PC.
■
If the program does not start automatically, double click the Media Studio icon on the desktop.
2 Click the desired file icon.
■
Choose the file type you want to transfer by clicking on one of these icons.
■
Click
icon to display music list.
■
Click
icon to display photo list
■
Click
icon to display etc list. The ETC list includes file types (ex: TXT, XOV, etc) other than
music, photo, and video files.
■
Click
icon to display video list.
3 Select the file to transfer in the left file list.
4 Click icon.
■
The selected file is transferred to the player.
■
Do not disconnect the USB cable during file transfer. This may cause damage to the
player or your PC.
■
When transferring a photo or video file to the player using <Media Studio>, it is automatically converted
into JPG(photo) or SVI(video) format before transfer. The file size is automatically adjusted, too.
CAUTION
NOTE
21
Listening to Music
Listening to Music
Before you start!
Connect the earphones, then turn on the player, and check the battery.
1 Press the [
then press the [
Music
Now Playing
Artists
2 Press the [
Genres
Playlists
] button.
] button to select the desired
list and then press the [
Albums
Tracks
] button to select <Music> and
3 Press the [
] button.
] button to select the file
to play and then press the [
■
■
■
■
■
■
■
] button.
The music file starts to play.
<Now Playing> : You can listen to the last played music or
recording file.
<Artists> : To play by artist
<Albums> : To play by album
<Tracks> : To play in numeric or alphabetical order
<Genres> : To play by genre
<Playlists> : To play by Playlist
1,2,3
■
■
NOTE
■
■
22
The music files compatible with the player are MP3, WMA.
MP1 or MP2 files which only have a changed extension to MP3, may not play on the player.
A file without an ID3 Tag (Unknown) is displayed as [Unknown].
If you press the [ ] button in Music mode, the “S” mark appears on the screen and the Street mode
is set to On. Pressing the [
] again to disappear “S” and set off the Street mode. √ Page 66
ENG
To Pause
1 Press the [
■
2 Press the [
■
] button while the music is playing.
The music playback will be paused.
] button again.
The music will play from the point where it stopped.
To search within a track
1 Press and hold the [
■
] button while the selected track is playing.
It searches to the beginning or the end of the track.
2 Release the button at the point you wish to start.
■
It starts playing from the point you release the button.
23
Listening to Music
Listening to Music (Continued)
To Play from the beginning of the current track
Press the [
■
] button after 5 seconds of play.
The current track starts playing from the beginning.
To play the previous/next track
Press the [
■
Press the [
■
] button.
The next track will start playing.
■
CAUTION
24
] button within 5 seconds of play.
The previous track will start playing.
When playing VBR files, the previous track may not play even if you press the [
5 seconds of the play.
] button within
Listening to Music
To set a section for repetition
ENG
This function enables you to listen to specific parts of a track repeatedly. Recommended for language learning.
Section Repetition
1 Play a file of your choice.
the [A B/ ] button at the
2 Press
beginning of the section you want to repeat.
■
Audio Track 1
00:01:42
00:05:06
2,3
The starting point is set and <A
the screen display window.
> will appear in
the [A B/ ] button again to set the
3 Press
ending of the section you want to repeat.
■
<A B> will appear on the screen and the specified
section starts to play repeatedly.
To cancel the section repetition
Press the [A
Repeat.
■
■
B/ ] button again during Section
Section Repeat will be canceled.
You can set the start and end points of the section repetition only within a single file.
NOTE
25
Listening to Music
Creating Playlist Using Samsung Media Studio
A playlist is a list of your favorite songs.
1
[YP-T9[MTP]]
3
3
2
1 Click <My Album> on the top of Media Studio.
■
The <My Album> window appears.
2 Click <New Album> on the bottom.
■
The Creation window appears.
3 Type in the album title and click <OK>.
26
■
A new album (playlist) will be created and stored in the My Album section of Media Studio.
1 Click <My PC> on the top of Media Studio.
1
■
2
3
5
■
NOTE
A maximum of 999 playlists
transferred to the player can be
played.
ENG
Adding Music files to a Playlist
The My PC window appears.
<My Album> in the right corner of the
2 Click
window.
■
The My Album window appears.
3
files that you want to transfer in the
4 Select
<My PC> window.
5 Click icon.
Double click on a desired album in the right
window.
■
The selected files will be added to the album (playlist).
Exporting a Playlist to your Player Using Media Studio
1
3
2
4
1 Click <My Album> on the top of Media Studio.
<Portable> in the right corner of the
2 Click
window.
■
The My Album window appears.
■
The Portable window appears.
3 Select a desired album in the <My Album> list.
4 Click icon.
■
The selected album will be transferred to the player
and stored in <File Browser> ➝ <Playlists>.
27
Listening to Music
To Play a Playlist
You can easily listen to your favorite music by adding it to a Playlist.
To make your own Playlist
How To 1
Music
Song 1
Song 2
1 Press the [
then press the [
Song 3
] button to select <File Browser> and
] button.
Song 4
Song 5
2 Press the [
the [
■
] button to select <Music> and then press
] button.
The file list appears.
3 Press the [
] button to select a file to add to the
playlist and then press the [A B/ ] button.
■
NOTE
■
You can add up to 100 music files to <Favorites>.
■
If you want to remove a file from the <Favorites>, select a file marked with and then press the
[A B/ ] button. Alternately, you can press the [MENU] button to select <Delete from Favorites> and
press the [
■
28
Next to the selected file, the mark appears and the file is
included in <File Browser> → <Playlists> → <Favorites>.
] button.
For more information, see pages 26~27 to see how to create and transfer playlists to your player.
ENG
To make your own Playlist (Continued)
How To 2
Add to Favorites
the [
] button to select <File Browser> and
1 Press
then press the [ ] button.
the [
] button to select <Music> and then press
2 Press
the [ ] button.
■
The file list appears.
3 Press the [
] buttons to select a file to add to
the playlist and then press the [MENU] button.
the [
] button to select <Add to Favorites> and
4 Press
then press the [ ] button.
■
■
NOTE
Next to the selected file, the mark appears and the file is
included in <File Browser> → <Playlists> → <Favorites>.
If you want to remove a file from the <Favorites>, select a file marked with and then press the
[A B/ ] button. Alternately, you can press the [MENU] button to select <Delete from Favorites> and
press the [
] button.
29
Listening to Music
To Play a Playlist (Continued)
To Play a Playlist
Playlists
Favorites
My music
New music
the [
1 Press
press the [
] button to select <File Browser> and then
] button.
2 Press the [
press the [
■
] button to select <Playlists> and then
] button.
The Playlist(s) will appear.
3 Press the [
] button to select the playlist of your
choice, then press the [
■
4 Press the [
then press the [
■
30
] button.
The music files saved in the selected Playlist will appear.
] button to select the file to play and
] button.
The music file will start playing.
Listening to Music
ENG
Using Music menu
To select Street mode
This allows you to enjoy the music outdoors as clearly as indoors.
the [MENU] button when you are in the music
1 Press
playback mode.
Street Mode
DNSe
Play Mode
Music Backgrou..
Play Speed
2 Press the [
] button to select <Street Mode> and
then press the [
] button.
Skip Interval
00:01:42
00:05:06
3 Press the [
] button to select the desired mode and
then press the [
■
] button.
Select <On>.
To select 3D surround sound (DNSe)
You can listen to the music with 3D surround sound.
Street Mode
DNSe
Play Mode
Music Backgrou..
Play Speed
press the [
] button.
3 Press the [
Skip Interval
00:01:42
the [MENU] button when you are in the music
1 Press
playback mode.
2 Press the [ ] button to select <DNSe> and then
00:05:06
To exit the menu,
press the [MENU] button.
then press the [
■
] button to select the desired mode and
] button.
Select either <3D-User> <3D-Studio> <3D-Stage> <3D-Club>
<Normal> <Rock> <House> <Dance> <Jazz> <Ballad>
<Rhythm & Blues> <Classical> or <User EQ>.
31
Listening to Music
Using Music menu (Continued)
To select Play mode (Repeat)
Street Mode
DNSe
Play Mode
Music Backgrou..
Play Speed
Skip Interval
the [MENU] button when you are in the music
1 Press
playback mode.
2 Press the [ ] button to select <Play Mode> and then
press the [ ] button.
Press
the [
] button to select the desired mode and
3
then press the [
00:01:42
00:05:06
■
■
■
■
■
] button.
Select either <Normal> <Repeat> <Repeat One> or <Shuffle>.
<Normal> : To play all the tracks in order one time.
<Repeat> : To repeat the current folder.
<Repeat One> : To repeat one file.
<Shuffle> : To play files at random.
To select a background image for Music mode
You can set a background image for Music mode.
Street Mode
DNSe
Play Mode
Music Backgrou..
Play Speed
then press the [
3 Press the [
Skip Interval
00:01:42
the [MENU] button when you are in the music
1 Press
playback mode.
2 Press the [ ] button to select <Music Background> and
00:05:06
■
■
NOTE
] button to select the desired background
image and then press the [
■
32
] button.
] button.
Select either <FLASH1> <FLASH2> <FLASH3> <Album Cover>
<Photo> or <Auto>.
Selecting <Auto> will change the background image by picking one
from <FLASH1> to <FLASH3> each time a different file is played.
If there is an image contained in the tag information of a music file, it will be displayed as a background image when you
have selected <Album Cover>. <Album Cover> supports only less than 200 pixel (horizontal) x 200 pixel(vertical) in size.
ENG
To select the play speed
You can select the play speed either faster or lower.
Street Mode
DNSe
Play Mode
Music Backgrou..
Play Speed
press the [
] button.
3 Press the [
Skip Interval
00:01:42
the [MENU] button when you are in the music
1 Press
playback mode.
2 Press the [ ] button to select <Play Speed> and then
00:05:06
then press the [
] button to select the play speed and
] button.
■
Select either <-3> <-2> <-1> <0>(Normal) <+1> <+2> or <+3>.
■
The larger the number, the faster the speed of play.
To set the skip interval
You can set the playback interval when you press the [
] button during playback.
the [MENU] button when you are in the music
1 Press
playback mode.
Street Mode
DNSe
Play Mode
Music Backgrou..
Skip Interval
00:01:42
2 Press the [
then press the [
Play Speed
3 Press the [
00:05:06
] button to select <Skip Interval> and
] button.
] button to select the desired skip
interval and then press the [
■
] button.
Select either <1track> <3sec> <5sec> <7sec> <10sec> <30sec>
or <1min>.
33
Video
Video
Before you start!
Connect the earphones, then turn on the player, and check the battery.
1 Press the [
] button to select <Video> and
then press the [
2 Press the [
] button.
] button to select the desired
video clip and then press the [
■
] button.
The selected video file starts to play.
To stop playing the video file
Press the [
■
] button in Video mode.
Each time you press the [
] button, the player stops
playing the video file or resumes playback.
1,2
■
NOTE
34
When transferring a video file to the player using <Media Studio>, it is automatically converted into
SVI format before transfer. The file size is automatically adjusted, too.
ENG
Video Information Display
Press the [
■
] button in Video mode.
Information on the current video appears. Press the [
] button again to disappear the information.
1 Play/Pause Indicator
2 File Name
3 Play Position Indicator
1
4 Current Play Time Indicator
2
any story 1
3
4
5
6
5 Volume Level Indicator
6 Full play time for the current video
35
Video
Video (Continued)
To move to a certain position of the current video file
1 In a horizontal view, press and hold the [
■
any story 1
] button.
This enables you to scroll through the current video file.
the button when you have moved to the desired
2 Release
position.
■
The video starts playing from the position.
To play the previous/next video file
Press the [ ] button within 5 seconds after the current
video started playing.
■
This will return to the previous movie.
Press the [
] button.
any story 2
■
36
This will move to the next movie.
Video
ENG
Using Video menu
To set a bookmark
Press the [A
■
B/ ] button at the desired scene.
The currently played/stopped point is set to a bookmark.
any story 1
■
You can set a maximum of 20 bookmarks.
NOTE
To Move to/remove the bookmark
Go to
Delete
1 Press the [MENU] button in Video mode.
■
The Bookmark menu appears.
2 Press the [
3 Press the [
] button.
and press the [
■
] button to select <Go to> or <Delete>
] button.
When you selected <Go To> then it will move to the selected
bookmark and <Delete> will remove the selected bookmark from
the video file.
37
Photo Viewing
Photo Viewing
Before you start!
Connect the earphones, then turn on the player, and check the battery.
1 Press the [
then press the [
■
] button to select <Photo> and
] button.
The photo preview window appears.
2 Press the [
] button to select the desired
photo and then press the [
■
] button.
The selected photo is displayed.
1,2
■
NOTE
■
■
38
When transferring a photo file to the player using <Media Studio>, it is automatically converted into
JPG format before transfer. The file size is automatically adjusted, too.
You can also use the <File Browser> to search for a photo file. √ Page 14
You can keep listening to music even if you select <Photo> to view a photo.
ENG
To move to the previous/next photo
Press the [
] button while viewing a photo or press the [
mode to display the previous or next photo.
] button in preview
Photo Display Window
Photo
1
3
1 Preview Pane
2 File Name
3 Thumbnails
4 The current file number/total number of photos
2
test0
1/20
4
39
Photo Viewing
Using Photo menu
Slideshow Viewing
Start Slideshow
1 Press the [MENU] while viewing a photo
Zoom
As Music Backgr..
2 Press the [
then press the [
■
] button to select <Start Slideshow> and
] button.
The slideshow will start.
To stop the slideshow
Press the [
■
40
] button in Slideshow mode.
This will stop the slideshow.
ENG
Photo Enlarging
100%
200%
400%
1 Press the [MENU] while viewing a photo
2 Press the [ ] button to select <Zoom> and then press
the [
■
] button.
The Zoom Setting menu appears.
3 Press the [
] button to select the desired scale factor
and then press the [
■
] button.
You can select either <100%> <200%> or <400%>.
4 Press the [
] to move to the portion of the photo
to magnify.
cancel the magnification, select <100%> from the Zoom
5 Tooptions
and then press the [ ] button.
■
■
Press the [
This returns to the original size.
] button in the Photo Viewing mode to display the Zoom Setting menu.
NOTE
41
Photo Viewing
Using Photo menu (Continued)
To set the photo as a music background image
1 Select a photo file to set as a background image.
2 Press the [MENU] while viewing the photo.
3 Press the [
Audio Track 1
00:01:42
00:05:06
■
[
■
■
42
Press the [A
] button.
The Music Background Image Setting menu appears.
4 Press the [
NOTE
] button to select <As Music Background>
and then press the [
] button to select <Yes> and then press the
] button.
The selected photo file is set to a background image for music.
B/ ] button while viewing a photo to display the Music Background Setting menu.
Text View
Before you start!
You can read a novel or see the manuscript text of a news story or soap
opera while listening to music.
ENG
Text Viewing
Turn on the player, and check the battery.
1 Press the [
] button to select <Text> and
then press the [
2 Press the [
press the [
■
] button.
] button to select Text and then
] button.
You will see the text on the screen.
To scroll the text by the line
Press the [
■
■
1,2
■
■
NOTE
■
■
] button.
Once you set <Scroll By> → <Page> in Text mode, you can
move to the previous / next page of the text file.
Once you set <Scroll By> → <Line> in Text mode, you can
move to the previous / next line of the text file. Press and
hold the [
] button to move up or down faster through the
file.
You can also use the <File Browser> to search for a text file. √ page 14
This product supports the TXT file format in Text mode.
You can keep listening to music even if you select <Text>.
Press the [
] button if you want to play a music while viewing text. Press the [
again to stop playing the music.
] button
43
Text View
Using Text menu
To set a bookmark
Press the [A
■
■
B/ ] button while viewing a text.
The current text screen is set to a bookmark with the † symbol displayed
on the top left corner.
The bookmark can be deleted by pressing the [A
bookmarked page.
■
B/ ] button in the
You can set a maximum of 20 bookmarks.
NOTE
To move to/remove the bookmark
Go to 1st Page
Bookmark
Scroll By
Text Viewer Type
Text Viewer Color
1 Press the [MENU] button while viewing a text.
2 Press the [ ] button to select <Bookmark> and
then press the [
■
] button.
The Bookmark menu appears.
3 Press the [
] button to select <Go to> or <Delete>
and then press the [
■
44
] button.
When you selected <Go To> then it will move to the selected
bookmark and <Delete> will remove the selected bookmark
from the text file.
Go to 1st Page
Bookmark
Scroll By
1 Press the [MENU] button while viewing a text.
2 Press the [ ] button to select <Go to 1st Page> and
Text Viewer Type
then press the [
Text Viewer Color
■
] button.
The Confirmation window will appear.
3 Press the [
[
■
ENG
To move to the first page
You can see the text file from the beginning.
] button to select <Yes> and press the
] button.
This will move to the first page of the text file.
To set the scroll option
Go to 1st Page
Bookmark
Scroll By
1 Press the [MENU] button while viewing a text.
2 Press the [ ] button to select <Scroll By> and then
press the [
Text Viewer Type
Text Viewer Color
■
] button.
The Scroll option menu appears.
3 Press the [
then press the [
■
You can press the [
] button.
■
You can select either <Page> or <Line>.
<Page>: Use the [
] button to scroll through the file by the page.
■
<Line>: Use the [
■
NOTE
] button to select the desired option and
] button to scroll through the file by the line.
] button to change the scroll option in Text View mode.
45
Text View
Using Text menu (Continued)
To set the text viewer type
Go to 1st Page
Bookmark
Scroll By
Text Viewer Type
Text Viewer Color
1 Press the [MENU] button while viewing a text.
2 Press the [ ] button to select <Text Viewer Type> and
then press the [
■
3 Press the [
■
] button.
The Text Viewer Type menu appears.
] button to select the desired text viewer type.
You can select either <Vertical> or <Horizontal>.
To set the text viewer color
Go to 1st Page
Bookmark
Scroll By
Text Viewer Type
Text Viewer Color
1 Press the [MENU] button while viewing a text.
2 Press the [ ] button to select <Text Viewer Color> and
then press the [
■
the [
3 Press
color.
46
] button.
The Text Viewer Color menu appears.
] button to select the desired text viewer
■
Select either <Auto> <Blue> <Green> <Orange> <Pink> or <Purple>.
■
Selecting <Auto> will set the viewer color to the same as the main menu.
Listening to FM Radio
Before you start!
Connect the earphones, then turn on the player, and check the battery.
Press the [
the [
■
ENG
Listening to FM Radio
] button to select <FM Radio> and then press
] button.
FM radio reception will start.
To use Mute function
Press [
] button during listening to FM radio.
■
Sound is muted.
■
Press [
] button once again to sound back.
47
Listening to FM Radio
Listening to FM Radio (Continued)
To automatically search for frequencies
1 Press the [
■
Auto Searching...
] button to select <MANUAL>.
You will see <MANUAL> in the top right corner.
2 Press and hold the [
■
] button and then release.
The frequency nearest from the point the button is released will be searched.
■
In <PRESET> mode, press [MENU] and use the [
■
<Go to Manual Mode> and press the [ ] button. You will switch to
<MANUAL> mode.
In <MANUAL> mode, press [MENU] and use the [
] button to select
NOTE
<Go to Preset Mode> and press the [
<PRESET> mode.
] button to select
] button. You will switch to
To manually search for frequencies
1 Press the [
■
2 Press the [
■
] button.
Moves to frequencies whenever the button is pressed.
■
Always connect your earphones to the player when searching or setting frequencies.
The earphones are used as antennas to receive FM radio reception.
■
In poor reception areas, the player could not scan for any frequency available.
CAUTION
48
] button to select <MANUAL>.
You will see <MANUAL> in the top right corner.
Listening to FM Radio
ENG
Setting a Frequency
To automatically set frequencies
Go to Preset Mo..
Add to Preset
Auto Preset
1 Press the [MENU] button in FM Radio mode.
FM Region
FM Sensitivity
2 Press the [
press the [
■
The Auto Preset Confirm window will appear.
3 Press the [
[
■
] button to select <Auto Preset> and then
] button.
] button to select <Yes> and then press the
] button.
You will see the <Auto Preset> window that allows you to set up to
30 frequencies.
To cancel during setting
To cancel setting during <Auto Preset> setting, press the [
button.
■
■
NOTE
]
The auto preset setting is canceled and frequencies set up to then are
stored.
To set <Auto Preset> again after setting preset, existing frequencies are deleted entirely and you can
reset from start.
49
Listening to FM Radio
Setting a Frequency (Continued)
To manually set frequencies
1 Press the [
■
] button to select <MANUAL>.
You will see <MANUAL> in the top right corner.
2 Press the [
] button to select the desired frequency to
set in preset.
3 Press the [A
4 Press the [
■
B/ ] button.
<ADD> blinks before the preset number appears.
] button to select the desired preset number
and press the [
■
NOTE
] button.
The selected frequency is set as a preset number.
■
You can set the preset frequency by pressing [MENU] to select <Add to Preset> in <MANUAL> mode.
■
If you set an identical frequency, you will see <Same frequency exists. Save?>. Press the [
to select <Yes> or <No> and press the [ ] button.
] button
To search for frequencies in PRESET mode
1 Press the [
■
2 Press the [
■
50
■
NOTE
] button to select <PRESET>.
You will see <PRESET> in the top right corner.
] button.
The preset number is selected and you can listen to the stored radio
frequency.
If you didn’t set a preset frequency, you will see <No preset> and couldn’t switch to <PRESET> mode.
Listening to FM Radio
Before you start!
■
Follow the steps below to delete frequencies while listening to FM radio.
1 Press the [
■
] button to select <PRESET>.
You will see <PRESET> in the top right corner.
2 Press the [A
■
ENG
To Delete Presets
B/ ] button.
<DELETE> blinks.
3 Press the [
] button to select the frequency that you
want to remove from the PRESET list and press the [ ]
button.
■
The Delete Preset window will appear.
4 Press the [
the [
■
] button to select <Yes> and press
] button.
■
The selected preset number will be deleted.
■
If you don’t want to delete the preset number, select <NO>.
You can remove the preset frequency by pressing [MENU] to select <Delete Preset> in <PRESET> mode.
NOTE
51
Listening to FM Radio
Using FM Radio menu
To set FM region
Go to Preset Mo..
Add to Preset
Auto Preset
FM Region
1 Press the [MENU] button in FM Radio mode.
2 Press the [ ] button to select <FM Region> and then
press the [
FM Sensitivity
■
] button.
The FM Region menu appears.
3 Press the [
press the [
■
■
NOTE
■
■
] button to select the FM Region and then
] button.
You can select from <Korea/US> <Japan> <Other Countries>.
Frequency range by region
- Korea/US: Search for FM frequencies in 100 kHz increments between 87.5 MHz~108.0 MHz.
- Japan: Search for FM frequencies in 100 kHz increments between 76.0 MHz~108.0 MHz.
- Other Countries: Search for FM frequencies in 50 kHz increments between 87.50 MHz~108.00 MHz.
FM region can be deleted or changed according to the target region of the player.
If you change the FM region, the previously stored radio frequencies are removed.
To set FM sensitivity
Go to Preset Mo..
Add to Preset
Auto Preset
FM Region
1 Press the [MENU] button in FM Radio mode.
2 Press the [ ] button to select <FM Sensitivity> and
then press the [
FM Sensitivity
■
the [
3 Press
press the [
52
■
■
] button.
The FM Sensitivity menu appears.
] button to select the search level and then
] button.
You can select from <High> <Middle> and <Low>.
The higher FM Sensitivity is, the more frequencies can be received.
Recording
ENG
Recording
File names during recording
recording, a recording file name is automatically specified in such as
1 In“Xmmddhhmmss”.
Where X indicates the recording type, mm for a month,
dd for a date, mm for minutes and ss indicates seconds.
2 The type of recording is as follows;
■
Voice - V
■
Radio – F (FM)
instance, the file name “V0911103020” indicates a voice recording was
3 For
made 10 o’clock 30 minutes 20 seconds on September 11th.
■
NOTE
■
■
To listen to saved recording files, use the <File Browser> function. √ Page 14
For more information on recording, see the recording setting section on page 67.
You can set or store a maximum of 999 files for each of voice and FM radio recording.
53
Recording
Recording
1 Press the [
] button to select <Record>
and then press the [
■
3
The appropriate window appears.
3 Press the [A
■
■
■
■
B/ ] button.
Recording is started with displaying the file name to save.
<Record Voice>: you can make a voice recording.
<Record FM Radio>: you can record the FM radio
broadcasting that you listened to the last time.You can
use the [
] button to select a desired frequency.
<Recorded Files>: you can listen to voice recording
and FM radio recording.
To stop recording
1 Press the [A
B/ ] button while in recording.
2 Press the [
] button to select <Yes> or <No> and press the [
■
■
■
You will see a message that prompts you to confirm your choice.
<Yes> will play the just recorded file.
<No> will not play the just recorded file.
3 Press the [
54
■
]
] button to select the desired
the [
2 Press
recording mode and press the [ ] button.
■
1,2
] button.
Then, press the [MENU] button and use the [
and [ ] buttons to set your recording options.
] button to select <Yes> and press the [
The recorded file is stored in the <File Browser> → <Recorded>.
] button.
] button.
Recording
ENG
Voice/FM Radio Recording
To make a voice recording
You can make voice recording at any time while using
different functions.
Press and hold the [A
■
B/ ] button.
Recording is started with displaying the file name to save.
To record FM radio broadcasting
You can record FM radio broadcasting at any time while
listening to the radio.
In FM Radio mode, press and hold the [A
■
■
NOTE
■
■
B/ ] button.
An automatically created file name appears and the recording
starts.
Do not place the microphone too close or too far away during recording, as this can affect the recording quality.
Voice recording does not perform properly when the battery is low.
You can make a voice recording for about 69 hours (based on 32Kbps, 1GB)
55
Bluetooth
a Bluetooth-compliant stereo headset with your player before you
Using Bluetooth Register
can configure the wireless connection. When done, you can listen to the
music through the Bluetooth headset.
(The Bluetooth feature can be applied only for the appropriate model (YP-T9B, T9JB)
What is Bluetooth?
Bluetooth is a computing and telecommunications industry specification that
describes how mobile phones, computers and PDAs can easily interconnect with
each other and with home and business phones and computers using a short
wireless connection.
■ The Bluetooth device can cause a noise or malfunction, depending on the use
conditions.
■
■
■
■
■
■
■
■
■
56
Electrical interference from a physical contact on the product, for instance, if you take the product on the
one hand and wear the stereo headset.
From a physical contact on the transmitter or receiver of the product or the stereo headset
Electrical variation from electrical jamming by the wall, corner or office partitioning
Electrical interference from the same frequency-band devices including medical equipment, microwave
oven and wireless LAN.
The longer the distance between the product and the stereo headset is, the
quality will be deteriorated in proportion and if the distance exceeds a certain
range, the wireless networking is disconnected.
When pairing the Bluetooth device with the product, make it within a short
distance as possible.
You are not recommended to use text and photo view modes while listening to
the music with the headset. Otherwise, it can cause a delayed response of the
button operation and interference with the Bluetooth communications.
In poor reception-sensitivity areas such as inside the lift or under the ground,
the Bluetooth connection may not work properly.
A file at lower than 32 kHz may not be played, depending on the specification
of the stereo headset.
Bluetooth
Bluetooth Specification
ENG
Using Bluetooth (Continued)
The performance of a Bluetooth device can vary, depending on the specification.
This product is compliant with the standard Bluetooth specifications.
■ Specifications for certain purposes: In general, the transmission output is
great, causing less reduction of the signal strength but requiring more power
from the battery.
■ Standard Specifications: The transmission output is comparatively low,
which causes more reduction of the signal strength but minimizes the power
consumption to increase the useful time.
■
NOTE
When not in use, set the <Bluetooth Mode> to <OFF>. If you stay in <ON> for <Bluetooth Mode>,
the useful time of the battery is reduced.
57
Bluetooth
Using Bluetooth (Continued)
Before you start!
■
Ensure that the Bluetooth device to connect is ready for pairing. (Refer to the
product's documentation of the device.)
Registering the Stereo Headset
(simply register it only once)
the [
] button to select <Bluetooth>
1 Press
and then press the [ ] button.
the [
] button to select <Bluetooth
2 Press
Mode> and then press the [ ] button.
the [
3 Press
press the [
] button to select <On> and then
] button.
1,2,3
■
You can use the Bluetooth connection for listening to the music only.
Other modes including FM radio, video or game do not support the Bluetooth functionality.
■
The maximum distance that enables wireless connection between the product and a stereo headset
or hands-free device is 10m. The connection becomes automatically cut off if the distance is out of
this range. The sound quality will be deteriorated in places of obstacles such as walls or doors even
within this range.
NOTE
58
Bluetooth
Bluetooth
4 Set the stereo headset to the appropriate mode for registration.
■
Bluetooth Mode
Search Device
Stereo Headset
Delete Device
Bluetooth Settings
To set the headset ready for the pairing mode, refer to the product's
documentation.
5 Press the [
] button to select <Search Device> and
then press the [
6 Press the [
] button.
] button to select a device to register, and
then press the [
■
ENG
Using Bluetooth (Continued)
] button.
The Password Input Window will appear.
7 Press the [
] button to enter the password for
the stereo headset.
■
For setting the password, refer to the product's documentation.
8 Press the [
[
■
] button to select <OK> and then press the
] button.
The headset will be registered.
Bluetooth-compliant Headsets
NOTE
■
Company
Model
Company
i.TECH
Blueband
SAMSUNG
Model
SBH100
Plantronics
PULSAR 590A
Jabra
BT620s
MOTOROLA
HT820
Use only the Bluetooth-certified stereo headset. The mono hands-free headset is not supported.
59
Bluetooth
Using Bluetooth (Continued)
Connecting the registered stereo headset
Bluetooth
Bluetooth Mode
Search Device
Stereo Headset
the [
] button to select <Bluetooth> and then
1 Press
press the [ ] button.
the [
] button to select <Stereo Headset> and
2 Press
then press the [ ] button.
Delete Device
Bluetooth Settings
the [
] button to select a stereo headset to
3 Press
connect, and then press the [ ] button.
■
4
■
NOTE
■
The connection is completed.
Play a file of your choice.
■
You can listen to the music using a stereo headset.
If you can't find the desired headset to connect, register it first.
If you turn off the player or the headset, and then turn it on, the bluetooth communication may be disconnected.
If you want to listen to the music again using the stereo headset, repeat the instructions above.
To delete a Device
Bluetooth
Bluetooth Mode
Search Device
Stereo Headset
Delete Device
Bluetooth Settings
the [
] button to select <Bluetooth> and then
1 Press
press the [ ] button.
the [
] button to select the
2 Press
<Delete Device> and then press the [ ] button.
■
You will see the list of the registered devices.
the [
] button to select the device to delete,
3 Press
and then press the [ ] button.
■
60
If you want to delete all of the registered devices, select <Delete All>.
the [
4 [Press] button.
■
] button to select <Yes> and then press the
The selected device will be deleted.
Bluetooth
Using Bluetooth (Continued)
Bluetooth
Bluetooth Mode
Search Device
Stereo Headset
Delete Device
Bluetooth Settings
the [
] button to select <Bluetooth> and then
1 Press
press the [ ] button.
2 Press the [ ] button to select <Bluetooth Settings>
and then press the [ ] button.
] and [ ] buttons to set the desired
3 Use the [
ENG
To set Bluetooth
functions
■
<Discover Option> : You can set to enable or disable a Bluetooth
cellular phone to detect this player when it searches for a Bluetooth
device. Select from <Discoverable> and <Non-Discoverable>.
■
<Search Timeout> : You can select the scanning time period for a
new device. Select one from <10sec>, <20sec>, <30sec>, <45sec>
and <60sec>.
■
<My Device Information> : You can check the name and address of
your player.
Rename
Edit Device Name
1 Press the [MENU] button in the <My Device Information> window.
2 Press the [ ] button to select <Edit Device Name> and
then press the [
■
3 Use the [
■
] button.
The Edit Device Name window appears.
] and [
] buttons to rename the device.
: Pressing the [A B/ ] button will switch the mode in the
sequence of Number → English Upper Case → English Lower Case.
■
: You can clear the characters from the end one at a time.
■
: Confirm your change.
61
Bluetooth
Using Bluetooth menu
To disconnect the device
Disconnect
Connected Devi..
the [
1 Press
press the [
] button to select <Bluetooth> and then
] button.
2 Press the [MENU] button in Bluetooth menu
3 Press the [ ] button to select <Disconnect> and then
press the [
4 Press the [
[
■
] button.
] button to select <Yes> and press the
] button.
The currently connected device will be disconnected.
To check the device connected
Disconnect
Connected Devi..
the [
1 Press
press the [
] button to select <Bluetooth> and then
] button.
2 Press the [MENU] button in Bluetooth menu.
3 Press the [ ] button to select <Connected Device>
and then press the [
To exit the menu,
press the [MENU] button.
62
■
] button.
You can see a list of connected devices.
Game
You can enjoy Baseball and Pizza Delivery games.
Before you start!
■
Connect the earphones, then turn on the player, and check the battery.
1 Press the [
] button to select <Game> and
then press the [
■
ENG
Game
] button.
The Game menu appears.
2 Press the [
] button to select the desired
game and then press the [
] button.
1,2
■
The bundle games can be added or changed without notice.
NOTE
63
Game
Game (Continued)
Baseball
This is a family game that provides you with dynamic animation
and various characters, making you feel yourself in a real
baseball stadium.
■
Press the [
■
Press the [
] button to select a menu or function.
] button to pitch or hit the ball.
Pizza Deliver
A pizza delivery boy on a motor bike gets his way to the
destination dodging about obstacles on the road or pitfalls.
■
64
Press the [
] button to jump up
Settings
Settings
You can set detailed settings for music playback.
1 Press the [
Music
press the [
Record
■
] button to select <Settings> and then
ENG
Setting Music
] button.
The Settings menu appears.
Time
Display
Language
System
2 Press the [
press the [
■
] button to select <Music> and then
] button.
The Music menu appears.
3 Use the [
] and [
] buttons to set the
desired functions
■
NOTE
■
Button functions to use during setting.
- Press the [ ] button to move to the previous item.
- Press the [
- Press the [
] button to move to the next item.
] button to move up or down through the current menu.
- Press the [
] button to select or save the menu.
If there is no button operation during about 1 minute in the Settings screen, settings will be canceled
and returned to the previous function.
65
Settings
Setting Music (Continued)
■
<Street mode>: Allows you to enjoy the music outdoors as clearly as indoors.
You can select either <On> or <Off>.
■
<DNSe> : You can select a suitable sound for each music genre. Select either <3D-User>
<3D-Studio> <3D-Stage> <3D-Club> <Normal> <Rock> <House> <Dance> <Jazz> <Ballad>
<Rhythm & Blues> <Classical> or <User EQ>.
■
<3D User Set> : Sets 3D sound effect and bass enhancement.
3D can be set between 0~5 levels, and Bass Enhance between 0~3 levels.
After you set <3D User Set>, select <3D User> from <DNSe>.
■
<User EQ Set> : Directly select a sound effect (EQ). After you set <User EQ Set>, select
<User EQ> from <DNSe>.
■
<Play Mode> : Select playback mode such as repeat settings.
Select from <Normal> <Repeat > <Repeat One> and <Shuffle>.
■
<Play Speed> : Adjust the playback speed of music/voice recording.
Select either <-3> <-2> <-1> <0>(Normal) <+1> <+2> <+3>. (The higher the number is,
the faster the playback speed is.)
<Skip Interval> : Set the playback interval when you press the [
] button during
playback. Select either <1 Track> <3 sec> <5 sec> <7 sec> <10 sec> <30 sec> or <1 min>.
■
NOTE
■
For a VBR file, the Skip Interval may not be exact.
■
What is DNSe?
DNSe is a sound effect function for MP3 players developed by Samsung and consists of 3D and Street
modes. The 3D adds a stereophonic sound effect to the music and the Street mode provides an automatic
volume control function that amplifies quiet sounds in noisy street environments.
66
Settings
Settings
You can refine your recording options for FM radio and voice recording.
1 Press the [
Music
press the [
Record
■
] button to select <Settings> and then
ENG
Setting Record
] button.
The Settings menu appears.
Time
Display
Language
System
2 Press the [
■
] button to select <Record> and then
] button.
The Record menu appears.
3 Use the [
] and [
] buttons to set the
desired functions
■
<FM Recording Bit Rate> : You can choose the recording quality for FM radio.
Select one from <96kbps> <128kbps> <160kbps> <192kbps>.
(The greater the number is, the better the quality is but the file size is bigger)
■
<Voice Recording Bit Rate> : You can select the voice recording quality. Select one from
<32kbps> <64kbps> <96kbps> <128kbps>. (The greater the number is, the better the quality is
but the file size is bigger)
Chapter 4. Settings
press the [
67
Settings
Setting Time
Settings
You can set functions related to the Sleep Timer and Auto Power Off.
1 Press the [
Music
press the [
Record
■
] button to select <Settings> and then
] button.
The Settings menu appears.
Time
Display
Language
System
2 Press the [
the [
■
] button to select <Time> and then press
] button.
The Time menu appears.
3 Use the [
] and [
] buttons to set the
desired functions
68
■
<Date/Time Set> : You can set the current time and date. √ Page 69
■
<Sleep Timer> : Turns off power automatically after the preset time. Select either <Off> <15 min >
<30 min> <60 min> <90 min> or <120 min>.
■
<LCD Off> : If no button is pressed within the time set shown below, the display screen will
automatically turn off. Select either <15 sec> <30 sec> <1 min> <3 min> <5 min> or <Always On>.
Press any key to turn it back on.
■
<Auto Power Off> : Automatically turns power off when there is no button operation after the
preset time in the pause mode. Select either <15 sec> <30 sec> <1 min> <3min> or <5 min>.
■
<Screen Saver> : If no button is pressed within the time set shown below in music mode,
the player will display the screen saver image. Select either <Off> <15 sec> <30 sec> < 1 min >
<3 min > or <5min>.
Settings
ENG
Setting Time (Continued)
Date/Time Setting
1 Press the [
Time
] button to select <Date/Time Set> and
then press the [
Date/Time Set
] button.
Sleep
LCD Off
Screen Saver
3 Press the [
■
Date/Time Set
AM/PM
Hour
Min
AM
3
8
Year
Month
Date
2006
5
19
4 Press the [
[
] button.
The Confirmation window will appear.
Chapter 4. Settings
the [
] button to move to <AM/PM, Hour, Minute,
2 Press
Year, Month, Date> and press the [
] to set it.
Auto Power Off
] button to select <Yes> and press the
] button.
■
The set time/date will be saved.
■
<No> will cancel the time setting.
69
Settings
Setting Display
Settings
You can set the display options including color theme and music
background image.
1 Press the [
Music
press the [
Record
■
] button to select <Settings> and then
] button.
The Settings menu appears.
Time
Display
Language
System
2 Press the [
press the [
■
] button to select <Display> and then
] button.
The Display menu appears.
3 Use the [
] and [
] buttons to set the
desired functions
70
■
<Color Theme> : You can set the background color for the display screen. Choose one from the
6 color theme options. When <Random> is selected, each time you turn off and turn on the
power, the background color will be changed.
■
<Music Background> : You can select the background image to add to your listening
experience. Select either <FLASH 1> <FLASH 2> <FLASH 3> <Album Cover> <Photo> or
<Auto>. Selecting <Auto> will change the background image by picking one from <FLASH1> to
<FLASH3> each time a different file is played.
■
<Text Viewer Color> : You can set the background color for text. Choose one from 6 colors.
■
<Text Viewer Type> : You can choose to view the text either vertically or horizontally.
You can select either <Vertical> or <Horizontal>.
■
<LCD Brightness> : You can adjust the brightness of the display light. Select one from <0-10>.
Settings
Set the language for the menu and track information (ID3 Tag).
1 Press the [
Settings
Music
press the [
Record
■
] button to select <Settings> and then
ENG
Setting Language
] button.
The Settings menu appears.
Time
Display
2 Press the [
Language
System
press the [
■
] button to select <Language> and then
] button.
The Language menu appears.
3 Use the [
] and [
] buttons to set the
desired functions
■
<Menu> : Set the menu language. Select from <
> <English> <Français> <Deutsch>
<Italiano> <
><
><
> <Español> <
<Polski> <Português> <Svenska> <
■
> <Magyar> <Nederlands>
>.
<ID3 Tag> : Set the track information language.Select from <Afrikaans> <Basque> <Catalan>
<Chinese(S)> <Chinese(T)> <Czech> <Danish> <Dutch> <English> <Estonian> <Finnish>
<French> <German> <Greek> <Hrvatski> <Hungarian> <Icelandic> <Italian> <Japanese>
<Korean> <Norwegian> <Polish> <Portuguese> <Romany> <Russian> <Slovak> <Slovene>
<Spanish> <Swedish> <Turkish> and <Vietnamese>.
NOTE
■
The supported languages can be changed or added.
■
What is ID3-Tag?
This is what is attached to an MP3 to carry information relevant to the file, such as the title, artist, album, year,
genre and a comment field.
71
Settings
Setting System You can set the booting mode, resume and button sound.
Settings
1 Press the [
Music
press the [
Record
■
] button to select <Settings> and then
] button.
The Settings menu appears.
Time
Display
Language
System
2 Press the [
press the [
■
] button to select <System> and then
] button.
The System menu appears.
3 Use the [
] and [
] buttons to set the
desired functions
72
■
<Booting Mode> : You can set the start window after the system reboots. Select either
<Main Menu> and <Last Played>.
■
<Resume> : Specifies the starting point to restart playback after playback is stopped.
If set to <Off>, the last file will play from the beginning. If set to <On>, the last file will play from the point
it was previously stopped.
■
<Button Sound> : Sets the beep sound for button operations to on or off. Select either <On> or <Off>.
■
<Volume Limit> : You can avoid hearing damage by setting the limit of the volume when using the earphone. <On> will limit the maximum volume level up to 20. The maximum volume level when Volume
Limit is set to <Off> is 40.
■
<Default Set> : Returns all settings to the default value. Select from <Yes> and <No>.
√ Page 73
■
<Memory> : Indicates the remaining memory capacity. <Used> indicates the usage, <Available>
indicates the remaining capacity and <Total> indicates the total memory capacity.
■
<Firmware Version> : Displays the current firmware version.
Settings
ENG
Setting System (Continued)
Default Set
System
Booting Mode
Resume
Button Sound
Default Set
Press the [
then press the [
] button to select either <Yes> or <No> and
] button.
■
<Yes> : Initializes all settings to default.
■
<No> : Cancels default settings.
Memory
Firmware Version
■
Regarding the Built-In Memory
NOTE The actual built-in memory available is slightly less than indicated as the internal firmware uses a portion
of the memory.
73
is experienced, check the following.
Troubleshooting IfIf athemalfunction
problem persists, contact a Samsung Service Center near you.
Check points & Troubleshooting
Problem
■
Power will not turn on.
■
■
Buttons do not work.
■
■
■
The screen will not turn on.
Power is turning off.
■
Check if the [HOLD] switch is in the direction of the arrow position.
Check if you pressed the right button, then press again.
Press and hold the [MENU] and [A B/ ] buttons at the same
time to reset the system.
The screen may not be visible under direct sunlight.
When <LCD Off> is selected from <Settings> → <Display>, the
LCD can be turn off. Press any button and see if it turns on.
The power is automatically turned off when the battery is fully
discharged. Recharge the battery.
■
74
Power will not turn on if the battery is fully discharged.
Recharge the battery and turn the power on again.
Press and hold the [MENU] and [A B/ ] buttons at the same
time to reset the system.
The battery time can vary, depending on the sound mode and
display setting.
Product life may be shortened when left for extended periods in
low or high temperatures.
Battery life differs from
the Manual.
■
Program Malfunction
Please check if your PC requirements are met.
Connection to your PC
is disabled.
Press <Start> on the toolbar of your PC to run Windows Update.
Select Key Updates and Service Packs, then update all.
Reboot your PC and reconnect.
The file transfer rate is
too low.
If you are running multiple programs including Media Studio on
your PC, the file transfer rate will be low. So make sure to exit
unnecessary programs before proceeding.
Check points & Troubleshooting
Problem
■
Playing is disabled.
■
■
■
File upload is disabled.
■
■
ENG
Troubleshooting (Continued)
Check if the available file has been saved in the memory.
Check if the music file is damaged.
Check if there is enough battery power.
Check if the USB cable is securely connected.
Reconnect if necessary.
Check if the memory is full.
Press and hold the [MENU] and [A B/ ] buttons at the same
time to reset the system.
Files or Data are Missing.
Check if the USB cable has been disconnected during file or data
transmission. If this is the case, it may cause serious damage not
only to files/data but also to the product. You have to be extra
cautious as Samsung is not held responsible for data loss.
Abnormal Play Time
Display during Play.
Check if the file is in VBR (Variable Bit Rate) format.
Abnormal Display
of File Name.
Move to <Settings> → <Language> → <ID3 Tag> in the Menu
screen and set an appropriate language.
The product is hot.
Heat may be generated during recharging. This has no effect on
the product life or functions.
I couldn’t see a movie with
a message popping up.
Try to download the movie clip through Media Studio again.
75
Menu Tree You can quickly view the menu structure.
Menu Select Screen
Music
File Browser FM Radio
Text
Photo
Video
Game
Record
Settings
Music
Record
Time
Display
Language
System
Street Mode
FM Recording Bit Rate
Date/Time Set
Color Theme
Menu
Booting Mode
DNSe
Voice Recording Bit Rate
Sleep Timer
Music Background
ID3 Tag
Resume
3D User Set
LCD Off
Text Viewer Color
Button Sound
User EQ Set
Auto Power Off
Text Viewer Type
Volume Limit
Play Mode
Screen Saver
LCD Brightness
Default Set
Play Speed
Memory
Skip Interval
Firmware Version
* The Bluetooth feature can be applied only for the appropriate model (YP-T9B, T9JB).
76
Bluetooth
Model Name
Power
Built-in Battery Power
YP-T9
3.7V (Li-Polymer Rechargeable)
740 mAh
AUDIO: MPEG1/2/2.5 Layer3(8kbps~320kbps, 8kHz~48kHz),
WMA(5kbps~320kbps,8kHz~48kHz)
File
Compatibility
Video: SVI (Video: MPEG4, Audio: MP3 (44.1kHZ, 128kbps),
Resolution: 208X176, Frame Rate: 15fps)
Image: JPG (Progressive, Sequential Scanning, File Size: less than 3MB)
Supported Number of folders and Files Folder: Max. 500, File: Max. 5000(Include folder)
Earphone Output
20mW(France 5mW/CH)(16Ω)
Output Frequency Range
20Hz~20KHz
Noise Ratio
85 dB with 20kHz LPF(based on 1KHz 0 dB)
Maximum of 30 hours for music playback (based on: MP3 128kbps,
Play Time
Volume: 20, Normal Mode), Maximum of 6 hours for video playback
Temperature Range for Operation
-5~35 °C (23~95°F)
Case
Plastics
Weight
49g
Dimension (WxHxD)
42.5 X 83.1 X 11.0 mm
87.5~108.0MHz
FM T.H.D
1%
Radio FM Signal to Noise Ratio
FM
FM Frequency
55dB
FM Useable Sensitiivity
10dBµ
Blue
Frequency Range:
Transmit/Receive : 2402~2480 MHz Module
tooth
Spec Version Supported
1.2
Transmission Output
ENG
Product Specifications
BTTZ0502SA
2.4 mW
● The contents of this Manual are subject to change without prior notice for further
improvement.
77
License
The product unit accompanying this user manual is licensed under certain intellectual
property rights of certain third parties. This license is limited to private non-commercial use
by end-user consumers for licensed contents.
No rights are granted for commercial use. The license does not cover any product unit
other than this product unit and the license does not extend to any unlicensed product unit
or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination
with this product unit. The license only covers the use of this product unit to encode and/or
decode audio files conforming to the ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are
granted under this license for product features or functions that do not conform to the
ISO/IEC 11172-3 or ISO/IEC 13818-3.
78
Samsung Limited Warranty
Samsung Electronics Canada Inc. (SECA),
warrants that this product is free from defective material and workmanship.
SECA further warrants that if this product fails to operate properly within the specified
warranty period and the failure is due to improper workmanship or defective material
SECA will repair or replace the product at its option.
All warranty repairs must be performed by a SECA authorized service centre.
(The name and address of the location nearest you can be obtained by calling toll free
1-800-726-7864 or visiting our web site at www.samsung.ca)
Labour
one (1) year (carry-in)
Parts
one (1) year
On carry-in models, transportation to and from the service centre is the customer’s
responsibility.
The original dated sales receipt must be retained by the customer and is the only
acceptable proof of purchase. It must be presented to the authorized service centre
at the time service is requested.
Exclusions
This warranty does not cover damage due to accident, fire flood and/or
other acts of God; misuse, incorrect line voltage, improper installation,
improper or unauthorized repairs, commercial use, or damage that occurs in shipping.
Exterior and interior finish, lamps and glass are not covered under this warranty.
Customer adjustments which are explained in the instruction manual are not covered
under the terms of this warranty. This warranty will automatically be voided for any
unit found with a missing or altered serial number. This warranty is valid only on
products purchased and used in Canada.
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care centre.
Samsung Electronics Canada Inc., Customer Service
1-800-SAMSUNG (7267864)
www.samsung.com/ca
REV 0.0