Bosch PIE645Q14E Instruction manual

PIE645Q14E
Hob
[en] Instruction manual
3,$4
3,(4
‘
‘
‘
‘
‘
‘
‘
‘
3,/4
‘
‘
‘
‘
Ú Table of contents
nsomanuitr[e]I nctl
Safety warnings and advice...................................................... 3
Safety instructions...............................................................................3
Elements that may damage the appliance ....................................4
Protecting the environment ...................................................... 4
Environmentally-friendly disposal of waste products ...................4
Energy-saving advice .........................................................................4
Induction cooking...................................................................... 5
Advantages of induction cooking ....................................................5
Suitable pans .......................................................................................5
Familiarise yourself with the appliance ................................... 6
The control panel................................................................................6
The hotplates .......................................................................................6
Residual heat indicator ......................................................................6
Programming the hob................................................................ 6
Switching the hotplate on and off....................................................6
Set the hotplate ...................................................................................6
Cooking guidelines.............................................................................7
Childproof lock........................................................................... 8
Turning on and off the childproof lock. ..........................................8
Activating and deactivating the childproof lock ............................8
The Powerboost Function ......................................................... 8
Restrictions when using.....................................................................8
To activate............................................................................................9
To deactivate .......................................................................................9
Basic settings............................................................................. 9
To access the basic settings............................................................9
2
Care and cleaning.....................................................................10
Hob ..................................................................................................... 10
Hob frame ......................................................................................... 10
Fixing malfunctions.................................................................10
Normal noise while the appliance is working ............................ 11
After-sales service....................................................................11
Produktinfo
Additional information on products, accessories, replacement
parts and services can be found at www.bosch-home.com and
in the online shop www.bosch-eshop.com
ã=Safety warnings and advice
Please read these instructions
carefully. We advise you not to use
the appliance until you have read
them.
Keep the operation and installation
instructions. If the appliance is
passed on to another user, please
ensure that the documentation is also
passed on with it.
Check the appliance after removing it
from the packaging. If it has suffered
any damage in transport, do not
connect the appliance, contact the
Technical Assistance Service and
provide written notification of the
damage caused, otherwise you will
lose your right to any type of
compensation.
Hot hob
Risk of burns!!
Do not touch hot hotplates. Keep children away from the hob.
Risk of fire!!
■ Never place flammable objects on the hob
■
Do not keep flammable items or aerosols in the drawers
beneath the hob.
Wet hotplates and pan bases
Risk of injury!!
Liquid between the bottom of the pan and the hob can produce
steam pressure. Which may cause the pan to jump. Always
ensure that the hotplate and the base of the pan are kept dry.
Cracks in the hob
Risk of electric shock!!
Disconnect the appliance from the mains if the hob is broken or
cracked.
Contact the Technical Assistance Service.
The hotplate heats up, but the display does not work
Risk of burns!!
Turn off the hotplate if the indicator does not work. Contact the
Technical Assistance Service.
Safety instructions
The hob switches off
This device has been designed exclusively for home use. Only
use the hob for food preparation. The appliance must not be
left unsupervised while in use.
Risk of fire!!
Safe operation
To use this appliance safely, adults and children who, as a
result of
■
physical, sensory or mental disability,
■
or lack of experience or knowledge,
are not capable of using this appliance, should not do so
without the supervision of a responsible adult.
Children must be supervised to ensure that they do not play
with the appliance.
Oil and fat too hot
Risk of fire!!
Oil or fat that is too hot quickly catches fire. Do not leave
overheated oil or fat unwatched. If the oil or fat catches fire,
never use water to put it out. Extinguish the flames with a lid or
a plate. Switch off the hotplate.
Cooking food using the bain-marie method
The bain-marie method allows you to cook food in a saucepan
submerged in a larger pan containing water. The water cooks
the food with a gentle and constant heat, rather than directly
from the heat of the hotplate. When cooking food in bain-marie,
you must prevent tins, glass containers or other material from
resting directly on the base of the pan containing the water, to
prevent the glass on the hob and the pan from breaking due to
hotplate reheating.
If the hob switches off automatically and cannot be used, it can
subsequently switch on by itself. To avoid this the hob must be
disconnected from the mains. Please contact the Technical
Assistance Service.
Do not place metal objects on the induction hotplate
Risk of burns!!
Do not leave knives, forks, spoons, lids or other metal objects
that can heat up very quickly on the hob.
Fan care
Malfunction risk!
The bottom of the hob is equipped with a fan. If there is a
drawer under the hob it should not be used to store small
objects or paper, since they could damage the fan or interfere
with the cooling if they are sucked into it.
Caution!
There should be a minimum distance of 2 cm between the
drawer and the fan entrance.
Incorrect repairs
Risk of electric shock!!
Poor repairs are dangerous. Switch off the appliance if it is
faulty. Contact the Technical Assistance Service. Repairs and
the replacement of faulty connection cables may only be
performed by qualified personnel from the Technical
Assistance Service.
3
Caution!
This appliance complies with safety and electromagnetic
compatibility standards. However, people with pacemakers
must refrain from approaching the appliance when in use. It is
impossible to ensure that all of these devices available on the
market comply with current electromagnetic compatibility
standards, and that interference which may prevent the device
from working correctly will not occur. It is also possible that
people with other types of devices, such as a hearing aids,
could experience some discomfort.
Switching off the hob
After each use, always turn off the hob at the main switch. Do
not wait until the hob turns off automatically after the pan is
removed.
Elements that may damage the appliance
Caution!
■
■
■
■
Rough pan bases may scratch the hob.
■
Avoid leaving empty pots and pans on the hotplate. Doing so
may cause damage.
Do not place hot pans on the control panel, the indicator
area, or the hob frame. Doing so may cause damage.
Hard or pointed objects dropped on the hob may damage it.
Aluminium foil and plastic containers will melt if placed on the
hotplate while it is hot. The use of laminated sheeting is not
recommended on the hob.
Overview
The following table presents the most common damage
caused:
Damage
Cause
Measure
Stains
Food spillage
Immediately remove spilt food using a glass scraper.
Unsuitable cleaning products
Only use cleaning products specifically designed for glass-ceramic hobs.
Salt, sugar and sand
Do not use the hob as a tray or working surface.
Scratches
Pans with rough bottoms may scratch Check pans.
the glass ceramic
Fading
Chips
Unsuitable cleaning products
Only use cleaning products specifically produced for glass-ceramic hobs.
Contact with pans
Lift pots and pans before moving them around.
Sugar, substances with a high sugar Immediately remove spilt food using a glass scraper.
content
Protecting the environment
Unpack the appliance and dispose of its packaging in such a
way that no damage is caused to the environment.
Energy-saving advice
■
Environmentally-friendly disposal of waste
products
This appliance conforms to the Waste Electrical and
Electronic Equipment Directive WEEE 2002/96/EC.
This directive defines the framework for recycling used
appliances within European territory
■
■
■
■
■
4
Always place the correct lid on the pan. Cooking with an
uncovered pan will result in a four-fold increase in energy
use.
Use pans equipped with a solid, flat bottom. Curved pan
bases increase energy consumption.
The diameter of the pan base must coincide with the
diameter of the hotplate. This generally means the pan base
diameter is greater than that of the hotplate. If the diameter of
the pan is not the same as the diameter of the hotplate, it is
preferable to use a pan with a bottom that is larger in
diameter than the hotplate, otherwise half the energy will be
wasted. Please note: Whether the cookware manufacturer
has indicated the diameter of the top of the pan.
Choose pans of a size suited to the amount of food you are
going to cook. A large pan that is only half full will use a great
amount of energy.
Use a small amount of water when cooking. This saves
energy, and vegetables retain their vitamins and minerals.
Select a lower power level.
Induction cooking
Advantages of induction cooking
Characteristics of the pan base
Induction cooking represents a radical change from the
traditional method of heating; the heat is generated directly in
the pan. It therefore offers a number of advantages:
The characteristics of the pan base may affect the uniformity of
the cooking results. Pans made from materials which help
diffuse heat, such as stainless steel sandwich pans, distribute
heat uniformly, saving time and energy.
■
■
■
■
Time savings for cooking and frying; since the pan is heated
directly.
Energy is saved.
Care and cleaning are simpler. Foods that have spilt do not
burn as quickly.
Heat and safety control; the hob supplies or cuts off power
immediately when the control knob is turned on. The
induction hotplate stops supplying heat if the pan is removed
without having previously switched it off.
Suitable pans
Ferromagnetic pans
Only ferromagnetic pans are suitable for induction cooking,
these may be made from:
Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
■
enamelled steel
■
cast iron
Pan detection
■
special cutlery for stainless steel induction pan
To determine whether a pan is suitable, check to see if a
magnet will stick to it.
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Special induction pans
Double or triple hotplate
There is another type of pan specially made for induction, the
base of which is not entirely ferromagnetic. Check the diameter,
since this could affect detection of the pan, as well as the
cooking results.
These hotplates can detect pans of different sizes. Depending
on the material and properties of the pan, the hotplate will
adapt automatically, switching on part or all of the hotplate and
supplying sufficient power to obtain good cooking results.
Unsuitable pans
Never use pans made from:
■
common thin steel
■
glass
■
earthenware
■
copper
■
aluminium
5
Familiarise yourself with the appliance
These instructions for use are applicable to other hobs. On
page 2 an overview of the models is provided, along with
information on measurements.
The control panel
,QGLFDWRUVIRU
SRZHUOHYHO³É
IXQFWLRQDOLW\¯
UHVLGXDOKHDW‡
SRZHUERRVWIXQFWLRQ°
&RQWURO
SDQHOIRU
†VHOHFWLQJ
WKHKRWSODWH
&RQWURO
SDQHOIRU
PDLQVZLWFK
&RQWUROSDQHOVIRU
VHOHFWLQJSRZHU
OHYHO
&RQWURO
SDQHOIRU
'FKLOGSURRI
ORFN
The hotplates
Hotplate
Turning on and off
$ Single hotplate
Always use cookware of a suitable size.
æ Broiler
This zone is switched on automatically when using cookware with a base the
same size as the outer zone.
Use only cookware suitable for induction cooking; see the section on suitable cookware.
Residual heat indicator
The hob has a residual heat indicator • on each hotplate,
which lights up when they are hot. Avoid touching them when
this indicator is lit.
The • light will remain on while the hotplate is hot, even after
the hob has been turned off.
If the pan is removed before the hotplate is switched off, the •
will appear and alternate with the selected power level.
Programming the hob
This section will show you how to program the hotplates. The
table contains power levels and cooking times for several
dishes.
Set the hotplate
Switching the hotplate on and off
Power level 9 = maximum power.
The range is turned on and off using the main switch.
To switch on: press the % symbol. The indicator next to the
main switch and the ‹ indicators light up. The range is ready
for use.
To switch off: press the % symbol until the indicators go out. All
hotplates are turned off. The residual heat indicator will remain
lit until the hotplates have cooled down sufficiently.
Note: The range switches off automatically when all the
hotplates have been turned off for more than 20 seconds.
6
Select the required power level with the + and - symbols.
Power level 1 = minimum power.
Each power level has an intermediate setting. This is marked
with a dot.
Setting the power level
To switch off the hotplate
The range should be switched on.
Select the hotplate and then press the + or - symbol until ‹
symbol appears.
1. Press the § symbol several times until the ‹ indicator of the
required hotplate lights up.
2. Within the next 5 seconds, press the + or - symbol.The basic
setting appears:
+ symbol, power level 1.
- symbol, power level 9.
The hotplate turns off and the residual heat indicator appears.
Note: If no pan has been placed on the induction hotplate, the
selected power level flashes. After a certain time, the hotplate
switches off.
3. To change the power level: select the hotplate and press the
+ or - symbol until the required power level appears.
Cooking guidelines
The table below contains some examples.
The cooking times depend on the power level, type, weight and
quality of the food. As such they are approximate.
Remove purées, creams and thick sauces from time to time, if
they get too hot.
Use power level 9 to begin cooking.
Power levels influence the cooking results.
Ongoing cooking
setting
Ongoing cooking time
in minutes
Chocolate, chocolate coating, butter, honey
1-1.
-
Gelatine
Heating and warming
1-1.
-
Stew (e.g., lentils)
1-2
-
Milk**
1.-2.
-
Sausages heated in water**
Defrosting and heating
3-4
-
Frozen spinach
2­-3
5-15 min
Frozen goulash
Slow cooking, simmering
2­-3
20-30 min
Potato pancakes
4­-5*
20-30 min
Fish
4 -5*
10-15 min
White sauces (e.g., bechamel)
1-2
3-6 min
Whipped sauces (e.g., Bearnaise, Hollandaise)
Boiling, steaming, roasting
3-4
8-12 min
Rice (with a double amount of water)
2-3
15-30 min
Rice pudding
2-3
25-35 min
Unpeeled potatoes
4-5
25-30 min
Peeled potatoes with salt
4-5
15-25 min
Pasta
6 -7*
6-10 min
Soups
3­-4
15-60 min
Vegetables
2­-3
10-20 min
Greens, frozen foods
3­-4
7-20 min
Cooked in a pressure cooker
Roasting
4­-5
-
Meat roll
4-5
50-60 min
Roast
4-5
60-100 min
Goulash
* Continue cooking without a lid
** Uncovered
3­-4
50-60 min
Melt
7
Ongoing cooking
setting
Ongoing cooking time
in minutes
Steaks, plain or breaded
6-7
6-10 min
Frozen steaks
6-7
8-12 min
Chops, plain or breaded
6-7
8-12 min
Beefsteak (3 cm thick)
7-8
8-12 min
Chicken breast (2 cm thick)
5-6
10-20 min
Frozen chicken breast
5-6
10-30 min
Fish and fish fillet without breading
5-6
8-20 min
Fish and fish fillet with breading
6-7
8-20 min
Frozen breaded fish (e.g., fish fingers)
6-7
8-12 min
Prawns and shrimps
7-8
4-10 min
Frozen meals (e.g., stir-fries)
6-7
6-10 min
Crepes
6-7
fry one portion at a time
Omelette
3­-4
fry one portion at a time
Fried eggs
Frying** (150-200g per serving with 1-2 l. of oil)
5-6
3-6 min
Frozen foods (e.g., French fries, chicken nuggets)
8-9
fry one portion at a time
Frozen croquettes
7-8
Meatballs
7-8
Meat (e.g., chicken pieces)
6-7
Fish, in breadcrumbs or batter
6-7
Greens, mushrooms, in breadcrumbs or batter (e.g., baby mushrooms)
6-7
Confectionary products (e.g., fritters, fruit in batter)
* Continue cooking without a lid
** Uncovered
4-5
Broil**
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Turning on and off the childproof lock.
The range should be turned off.
Note: The childproof lock can be accidentally activated by the
presence of water spilled while cleaning, food that has spilled
over or objects resting on the D symbol.
Activating and deactivating the childproof
lock
To turn on: press the D symbol for approx. 4 seconds. The
indicator next to the D symbol lights up for 10 seconds. The
range is locked.
With this function, the childproof lock automatically activates
when a hob is switched off.
To turn off: press the D symbol for approx. 4 seconds. The
range is unlocked.
Activating and deactivating
See the “Basic Settings" section.
The Powerboost Function
The Powerboost function can be used to heat food more
quickly than using the power level Š.
Restrictions when using
This function is available for all hotplates, provided that the
other zone of the same group is not operating (see image).
Otherwise, in the visual display of the selected hotplate › and
Š will flash; then the power level will automatically set itself to
Š.
8
*URXS
*URXS
*URXS
*URXS
To activate
To deactivate
1. Select the power level Š.
1. Select a hotplate.
2. Press the + symbol. On the hotplate, the › indicator will
2. Press the - symbol. The › symbol will disappear and the
appear.
The function has been activated.
hotplate will return to the Š power level.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Basic settings
The device has several basic settings. These settings can be
adapted to the needs of the user.
Indicator
Function
™‚
Childproof lock
‹ Off.*
‚ Activated.
™ƒ
Beeps
‹ Most beeps deactivated.
‚ Some beeps deactivated.
ƒ All beeps deactivated.*
™†
Automatic time limitation.
‹ Basic setting: switch off after 1-10 hours.*
‚ The basic setting is halved: switch off after 0.5 - 5 hours.
ƒ The basic setting is quartered: switch off after 0.25 - 2.5 hours.
™ˆ
Power-Management function
‹ = Deactivated.*
‚ = 1,000 W minimum power.
‚. = 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š. = maximum power of the range.
™‹
Return to default settings
‹ Personal settings.*
‚ Return to factory settings.
*Factory settings
To access the basic settings
The range should be turned off.
1. Turn on the range with the main switch.
3. Press the D several times until the required setting indicator
appears.
4. Then select the required setting with the + and - symbols. The
setting appears on the upper right of the display.
2. Within the next 10 seconds, press the D symbol and hold
for 4 seconds.
5. Press the D symbol again and hold it for 4 seconds. The
settings have been properly saved.
™‚ appears in the lower display.
Quit
To leave the basic settings, turn off the hob at the main switch.
9
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Glass scraper
Hob
2. Use the blade to clean the hob surface
Remove dried-on food remains using a glass scraper.
1. Release the scraper safety catch
Do not attempt to clean the hob surface with the base of the
scraper. This could result in scratching.
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cold enough
before attempting to clean it.
Only use cleaning products specifically designed for glassceramic hobs. Follow the instructions provided on the
packaging.
ã=Risk of injury!!
The blade is extremely sharp. Risk of cuts. Protect the blade
when not in use. Replace the blade immediately when any
imperfections are found.
Care of the appliance
Do not use:
Apply an additive to protect and preserve the hob. Follow the
advice and warnings provided with the product.
■
Abrasive products
■
heavy-duty cleaners, like oven sprays and stain removers
■
Pads that may scratch
Hob frame
■
High-pressure or steam cleaners
In order to avoid damage to the hob frame, follow the
indications below:
■
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
Fixing malfunctions
Malfunctions are commonly due to small details. Before calling
the Technical Assistance Service, you should consider the
following advice and warnings.
Indicator
Malfunction
Solution
none
The electric power supply has been interrupted.
The appliance has not been correctly connected according to the connection diagram.
Electronic system malfunction.
Use other electrical appliances to check whether there has been a
power cut.
Check that the appliance has been connected correctly according to
the connection diagram.
The control panel is damp or an object is
resting on it.
Ҥ + number / Electronic system malfunction.
š + number /
¡ + number /
There is an internal error in the operation.
”‹/”Š
“ flashes
If the above checks do not resolve the malfunction, contact the Technical Assistance Service.
Dry the control panel area or remove the object.
Turn the hob off from the mains. Wait 30 seconds or so and switch it
back on.*
Turn the hob off from the mains. Wait 30 seconds or so and switch it
back on.*
The electronic system has overheated and Wait for the electronic system to cool down. Then push any symbol
”ƒ
the corresponding hotplate has been
on the hob.*
switched off.
The electronic system has overheated and
”…
all the hotplates have been switched off.
The hotplate has been working non-stop
The automatic time stop has been activated. Press any symbol on the
”‰
too long at a high power level.
control panel. The indicator goes out. The hob may now be switched
back on.
Incorrect supply voltage, outside normal
Please contact the local electricity board.
—‚
operating limits.
Wait until the electronic system has cooled down sufficiently before
The hotplate has overheated and has
—ƒ/—„
switched off in order to protect its cooking switching the hotplate back on.
surface.
* If the indication persists, call the Technical Assistance Service.
Do not rest hot pans on the control panel.
10
Normal noise while the appliance is working
A crackling sound
Induction heating technology is based on the creation of
electromagnetic fields that generate heat directly at the base of
the pan. Depending on how the pan has been manufactured,
these may produce certain noises or vibrations such as those
described below:
This noise occurs in pans which are made from different
materials superimposed on one another. It is caused by the
vibrations that occur ajoining surfaces of the different
superimposed materials. The noise comes from the pan. The
amount of food and cooking method can vary.
A deep humming sound as in a transformer
A high-pitched whistling sound
This noise is produced when cooking on a high power level. It
is caused by the amount of energy transferred from the hob to
the pan. The noise disappears or becomes faint when the
power level is lowered.
A low whistling sound
This noise is produced when the pan is empty. It disappears
when water or food is added to the pan.
This noise is produced mainly in pans made from different
materials superimposed on one another, and it occurs when
such pans are heated at maximum power on two hotplates at
the same time. The whistling disappears or becomes fainter as
soon as the power level is lowered.
Noise from the fan
For proper use of the electronic system, the temperature of the
hob must be controlled. For this purpose, the hob has a fan
that starts working after detecting excess temperatures at
different power levels. The fan may also work due to inertia
after the hob has been switched off, if the temperature detected
is still too high.
The noises described are normal, they are part of induction
heating technology and not a sign of malfunction.
After-sales service
Our after-sales service is there for you if your appliance should
need to be repaired. We are committed fo find the best solution
also in order to avoid an unnecessary call-out.
E number and FD number:
Please quote the E number (product number) and the FD
number (production number) of your appliance when
contacting the after-sales service. The rating plate bearing
these numbers can be found on the appliance certificate.
Please note that a visit from an after-sales service engineer is
not free of charge, even during the warranty period.
To book an engineer visit and product advice
GB
0844 8928979
Calls from a BT landline will be charged at up to 3
pence per minute. A call set-up fee of up to 6 pence may
apply.
IE
01450 2655
Trust the expertise of the manufacturer, and rest assured that
the repair will be carried out by trained service technicians
using original spare parts for your domestic appliance.
Please find the contact data of all countries in the enclosed
customer service list.
11
Robert Bosch Hausgeräte GmbH
Carl-Wery-Straße 34
81739 München
Germany
www.bosch-home.com
*9000308472*
9000308472
00
910321