Introduction
Congratulations on your new 3G/UMTS SX313 phone.
About This User Guide
This user guide is carefully designed to help you learn about
your phone’s features and operations quickly and effectively.
NOTICE
• We strongly recommend that you keep separate permanent
written records of all important data. Data may be lost or
altered in virtually any electronic memory product under
certain circumstances. Therefore, we assume no
responsibility for data lost or otherwise rendered unusable,
whether as a result of improper use, repairs, defects, battery
replacement, use after the specified battery life has expired
or any other cause.
• We assume no responsibility, directly or indirectly, for
financial losses or claims from third parties resulting from
the use of this product and any of its functions, such as
stolen credit card numbers, the loss or alteration of stored
data, etc.
• All company and/or product names are trademarks and/or
registered trademarks of their respective holders.
• Screen layout may differ from that illustrated in this user
guide.
The information described in this user guide is subject to
change without notice.
• All the functions described in this user guide may not be
supported by all networks.
• We assume no responsibility for downloaded contents,
information, etc. from the network.
• Occasionally, a few black or bright pixels may appear on the
screen. Please note that this will not have any impact on any
of the features or on performance.
Copyright
According to copyright laws, the reproduction, alteration and
use of material which is protected by copyright (music,
pictures, etc.) is only permitted for personal or private use. If
the user is not in possession of more extensive copyright or has
not received the explicit permission from the copyright owner
to reproduce, alter or use a copy which has been made or
modified in this way, this is considered to be a violation of the
copyright laws and gives the copyright owner the right to claim
for damages. For this reason, avoid the illegal use of material
which is protected by copyright.
Windows is a registered trademark of Microsoft Corporation in
the United States and/or other countries.
Introduction
1
Powered by JBlend™ Copyright 1997-2005 Aplix
Corporation. All rights reserved.
JBlend and all JBlend-based trademarks and logos
are trademarks or registered trademarks of Aplix
Corporation in Japan and other countries.
Powered by Mascot Capsule®/Micro3D Edition™
Mascot Capsule® is a registered trademark of HI Corporation
©2002-2005 HI Corporation. All Rights Reserved.
Licensed by Inter Digital Technology Corporation under one or more of the
following United States Patents and/or their domestic or foreign
counterparts and other patents pending, including U.S. Patents:
4,675,863: 4,779,262: 4,785,450: 4,811,420: 5,228,056: 5,420,896:
5,799,010: 5,166,951: 5,179,571 & 5,345,467
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
2
Introduction
T9 Text Input is covered by the Hong Kong Standard Patent No.
HK0940329 and HK1010924.
T9 Text Input is licensed under one or more of the following: U.S. Pat. Nos.
5,818,437, 5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Australian Pat. No. 727539; Canadian Pat. No. 1,331,057; United
Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro. Pat. No. 0 842 463
(96927260.8) DE/DK, FI, FR, IT, NL,PT.ES,SE,GB; Republic of Korea Pat.
Nos. KR201211B1 and KR226206B1; and additional patents are pending
worldwide.
miniSD™ is a trade mark of SD Card Association.
Bluetooth is a trademark of the Bluetooth SIG, Inc.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sharp is under license. Other trademarks
and trade names are those of their respective owners.
Contains Macromedia® Flash™ technology by Macromedia, Inc.
Copyright © 1995-2005 Macromedia, Inc. All rights reserved.
Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are
trademarks or registered trademarks of Macromedia, Inc. in the United
States and other countries.
CP8 PATENT
Licensed by QUALCOMM Incorporated under one or more of the following
United States Patents and/or their counterparts in other nations ;
4,901,307 5,490,165 5,056,109 5,504,773 5,101,501
5,506,865 5,109,390 5,511,073 5,228,054 5,535,239
5,267,261 5,544,196 5,267,262 5,568,483 5,337,338
5,600,754 5,414,796 5,657,420 5,416,797 5,659,569
5,710,784 5,778,338
This product is licensed under the MPEG-4 Visual Patent Portfolio License for
the personal and non-commercial use of a consumer to (i) encode video in
compliance with the MPEG-4 Video Standard (“MPEG-4 Video”) and/or (ii)
decode MPEG-4 Video that was encoded by a consumer engaged in a
personal and non-commercial activity and/or was obtained from a licensed
video provider. No license is granted or implied for any other use. Additional
information may be obtained from MPEG LA. See http://www.mpegla.com.
This product is licensed under the MPEG-4 Systems Patent Portfolio License
for encoding in compliance with the MPEG-4 Systems Standard, except that
an additional license and payment of royalties are necessary for encoding in
connection with (i) data stored or replicated in physical media which is paid
for on a title by title basis and/or (ii) data which is paid for on a title by title
basis and is transmitted to an end user for permanent storage and/or use.
Such additional license may be obtained from MPEG LA, LLC.
See http://www.mpegla.com for additional details.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.
Introduction
3
Useful Functions and Services
Your phone offers you the following features:
• Video Calling. You can talk while viewing each other on
respective screens.
• 3D and colour Java™ games and applications with a
graphic accelerator. You can also download various games
and applications from SmarTone-Vodafone via the mobile
Internet.
• Thin Film Transistor (TFT) colour LCD main display with
images that are clearer and easier to view.
• A built-in digital camera for taking pictures and video clips.
• A messaging function for reading and creating SMS and
MMS messages.
• Email for sending up to 300 KB and receiving mail with
attachments.
• A WAP browser for accessing information on the mobile
Internet.
• Your own ringtones and ringvideos. You can use downloaded
sound or video clip files as a ringtone or ring video clip file.
• Playback of the downloaded sound and video clip files.
• A voice recorder function for recording and playing back
voice clips.
4
Introduction
• A Bluetooth ® wireless technology interface for establishing
contact and transmitting data with certain devices. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• An infrared interface for data communication. You can
transmit pictures, sounds, and video clips to OBEX-enabled
phones.
• A schedule alarm for creating and sending schedule entries
with alarm settings.
• A miniSD™ memory card slot that expands connectivity with
a PC using the memory card.
Contents
Introduction .............................................................. 1
Getting Started ......................................................... 8
Inserting the SIM/USIM Card and the Battery ..... 11
Removing the SIM/USIM Card and the Battery ... 12
Charging the Battery ........................................ 13
Inserting the Memory Card ............................... 14
Removing the Memory Card ............................. 15
Connecting the Stereo Handsfree ...................... 15
Turning Your Phone On and Off ........................ 16
Keypad Lock .................................................... 16
Display Indicators (Main Display) ....................... 17
Display Indicators (External Display) .................. 19
Navigating Functions ............................................. 20
Voice Call/Video Calling Functions ........................ 21
Making a Voice Call ......................................... 21
Speed Dialling ................................................. 22
Redialling ........................................................ 22
Answering a Voice Call ..................................... 22
Incall Menu (Voice Call) .................................... 23
Making a Video Calling ..................................... 26
Answering a Video Calling ................................ 26
Incall Menu (Video Calling) ................................27
Using the Menu .......................................................29
Top Menu ........................................................29
List of Menu Functions .....................................29
Entering Characters ................................................31
Changing the Input Language ...........................32
Changing the Input Method ...............................32
Chinese User Dictionary ....................................37
Using Templates ..............................................40
Copying, Cutting and Pasting Text .....................40
Insert Phonebook Entries ..................................40
Call Manager ...........................................................41
Changing the List Displayed ..............................42
Selecting the Storage Memory ..........................42
Sorting the Phonebook List Order ......................42
Selecting the Search Mode ...............................42
Add New ..........................................................42
Viewing My Card ..............................................43
Copying Phonebook Entries between
SIM/USIM Card and Handset .............................43
Dialling from the Phonebook .............................43
Contents
5
Editing Phonebook Entries ................................ 44
Assigning a Ringtone or a Ring Video Clip File to
Each Entry ....................................................... 44
Deleting Phonebook Entries .............................. 44
Manage Group ................................................ 45
Message Groups ............................................. 45
Memory Status ................................................ 46
Speed Dial List ................................................ 46
Sending a Phonebook Entry .............................. 47
Receiving a Phonebook Entry ............................ 47
Sending a Voice Clip Message or Video Clip
Message Using an Address from the
Phonebook ...................................................... 47
Camera ................................................................... 48
Taking Pictures ................................................ 48
Recording Video Clips ...................................... 49
Common Functions in the Photo and Video
Camera Modes ................................................ 49
Functions in the Photo Camera Mode ................ 51
Functions in the Video Camera Mode ................ 53
Messages ............................................................... 54
SMS ............................................................... 54
MMS .............................................................. 54
Email .............................................................. 54
6
Contents
Creating a New Message ..................................54
Cell Broadcasts ................................................59
Area Info ..........................................................60
Messaging Settings ..........................................60
Browser ...................................................................63
Navigating a WAP Page ....................................64
Media Player ...........................................................67
TV & Video .......................................................67
Music Player ....................................................69
Gallery .....................................................................72
Picture Gallery .................................................72
Video Gallery ....................................................73
Sound Gallery ..................................................74
Other Documents .............................................75
Common Option Menus ....................................75
Text Templates ................................................78
Memory Status ................................................78
Games & Applications ............................................79
GSX™ & Java™ Gallery ..................................79
Set Java™ Wallpaper ......................................81
Java™ Settings ...............................................82
Java™ Information ..........................................83
Organiser ................................................................84
Calendar ..........................................................84
Alarms ............................................................ 87
Calculator ........................................................ 88
Voice Recorder ................................................ 89
Stopwatch ....................................................... 90
Tasks .............................................................. 90
World Clock ..................................................... 92
Countdown Timer ............................................ 92
Expenses Memo .............................................. 93
Phone Help ...................................................... 93
SIM Application ...................................................... 94
Settings .................................................................. 95
Profiles ........................................................... 95
Setting the Display ........................................... 99
Sound Settings .............................................. 102
Time & Date .................................................. 102
Language Setting ........................................... 103
Call Settings .................................................. 104
Video Calling Settings .................................... 108
Security ......................................................... 109
Card Settings ................................................. 111
Master Reset ................................................. 111
Call Log ................................................................. 112
Call Timers .................................................... 112
Data Counter ................................................. 112
Connectivity ..........................................................113
Bluetooth .......................................................113
Infrared .........................................................115
Network Settings ............................................116
Internet Settings .............................................117
Off Line Mode ................................................118
Backup/Restore ..............................................119
Connecting SX313 to Your PC ..............................120
System Requirements .....................................120
3G/GSM GPRS Modem ...................................120
Handset Manager ...........................................121
Software Installation .......................................121
Troubleshooting ....................................................123
Safety Precautions and Conditions of Use ..........125
Conditions of Use ...........................................125
Environment ...................................................128
Precautions Concerning Vehicle Use ................128
SAR ...............................................................128
Precautions for Use in USA .............................129
Out of Warranty List ..............................................131
Index .....................................................................132
Contents
7
Getting Started
19
1
10
18
20
11
2
3
12
4
5
6
7
8
9
8
Getting Started
13
14
15
16
17
26
27
21
22
24
23
25
28
29
1. Earpiece
2. Navigation Keys (Arrow Keys):
abcd
Moves cursor to highlight a
menu item, etc.
Up arrow key:
Displays the Shortcut menu
when pressed in standby.
Down arrow key:
Displays the Phonebook
entries when pressed in
standby.
Left arrow key:
Displays the list of GSX™ &
Java™ Gallery when pressed
in standby.
Right arrow key:
Displays Gallery when pressed
in standby.
3. Centre Key:
Displays the Main menu in
standby, and executes the
highlighted function.
4. Left Soft Key:
Executes the function in the
lower left of the screen.
A
Displays Messaging menu in
standby.
5. Send/Redial Key:
Makes or accepts calls,
displays the call logs in
D
standby.
6. Video Calling Key:
Makes or accepts Video
Callings.
S
7. Voice Mail Key:
G
8. * /Shift Key:
P
Long press to connect to the
Voice mail centre. (Depending
on the SIM/USIM card.)
Switches character input
method as follows on the text
entry screen.
In English mode: Abc, ABC,
abc and 123. In T9 mode, T9
Abc, T9 ABC, T9 abc and 123.
In Traditional Chinese mode:
Abc, ABC, abc, 123, and T9
Stroke
In Simplified Chinese mode:
Abc, ABC, abc, 123, T9
PinYin, and T9 Stroke
Press to enter P, ?, – or * in
standby.
Long press in standby to lock
the keypad.
9. Microphone
10. Sub Camera (Internal Camera)
11. Main Display
Getting Started
9
12. Right Soft Key:
C
13. End/Power Key:
F
14. Clear/Back Key:
U
15. Music Key:
E
16. Keypad
17. #/Silent Key:
R
Executes the function in the
lower right of the screen.
Shortcut to “SmarTone iN!” by
opening the browser. Press in
standby.
Ends a call and turns power
on/off.
Clears the characters before
the cursor, returns to the
previous screen, etc.
Displays Music menu in
standby.
Displays symbol screen on the
text entry screen.
Long press to switch
languages on the text entry
screen.
Long press in standby to
switch Profiles settings
between the mode most
recently activated and Silent
mode.
18. Camera (External Camera)
10
Getting Started
19. Built-in Aerial:
20. Battery Cover
21. Small Light:
Warning: Do not cover the top
of the phone with your hand
when in use as this may
interfere with the performance
of the built-in aerial.
Used as a battery charge
indicator, Event Light and
Status Light.
22. External Display
23. Speaker
24. Memory Card Slot Cover
25. Camera Key:
Long press to activate the
camera.
Y
Press during an incoming call
alert to answer the call.
26. Stereo Handsfree Connector
27. Side Keys (V/W):
Moves the highlight up or
down.
Press in standby or during a
call to increase or decrease
the earpiece volume.
28. Infrared Port:
Sends and receives data via
infrared.
Used to connect either the
29. External Connector:
charger or a USB data cable.
Inserting the SIM/USIM Card and the Battery
1. Slide off the battery cover (
).
1
3. Hold the battery so that the metal contacts of the battery
are facing down, slide the guides on the top of the
battery into the battery slots ( ), and then insert it
( 7 ).
7
2
6
2. Slide the SIM/USIM card holder to unlock (
). Lift and
put the SIM/USIM card in ( ). Then, slide the SIM/USIM
card holder back into place to lock ( ).
SIM/USIM card
4. Replace the battery cover.
Note
• Make sure that only 3V SIM/USIM cards are used.
• Make sure that the standard accessory battery (XN-1BT70)
is used.
3
4
5
Getting Started
11
Removing the SIM/USIM Card and the
Battery
1. Ensure that the phone is turned off and that the charger
and other accessories are disconnected. Slide off the
battery cover.
2. Lift the battery using the protruding edge and remove
the battery from the phone.
3. Slide the SIM/USIM card holder to unlock (
). Lift and
remove the SIM/USIM card ( ). Then, slide the SIM/
USIM card holder back into place to lock ( ).
1
2
3
12
Getting Started
Battery Disposal
The device is battery-powered. In order to protect the
environment, please read the following points concerning
battery disposal:
• Take the used battery to your local waste depot, dealer or
customer service centre for recycling.
• Do not expose the used battery to a naked flame, immerse
in water or dispose with the household waste.
Charging the Battery
Using the Charger
1. Open the cover of the external connector, connect the
charger to the external socket located at the bottom of
the phone by pressing both sides indicated with arrows,
and connect to an AC outlet.
Small light
Note
• When you purchase this phone, the battery may not be fully
charged.
• Charging time may vary depending on the state of the battery
and other conditions. (See “Battery” on page 126.)
To Disconnect the Charger
When charging is complete, the small light turns off.
1. Unplug the charger from the AC outlet, then unplug the
charger connector from the phone.
2. Close the cover.
Note
• Do not use any non-approved chargers as they may damage
your phone and invalidate any warranties, see “Battery” on
page 126 for details.
To Charge Using the Cigarette Lighter Charger
The optional cigarette lighter charger supplies power for
charging from the cigarette lighter socket of a car.
The small light turns red.
Standard charging time: Approx. 140 minutes
Battery Level Indicator
The current battery level is displayed in the upper right of the
main and the external displays.
Getting Started
13
Low Battery during Use
When the battery is running low, an alarm will sound and
“
” is displayed on the main and external displays.
If you are using your phone and you hear the low battery alarm,
attach your charger as soon as possible. The phone may not be
able to continue normal operation if you continue to use it.
Battery Indicators
Inserting the Memory Card
1. Turn off the phone.
2. Open the memory card slot cover.
3. Insert the memory card all the way in until it clicks.
Charge Level
Sufficiently charged
Charging recommended
Charging required
Empty
4. Close the cover.
Note
• Make sure that the phone is turned off before inserting the
memory card.
• Be sure to insert the card in the correct direction and
orientation.
• Do not open the memory card cover while the memory card
is being formatted or written to. The card may be damaged
beyond use.
• Keep all memory cards out of the reach of small children.
14
Getting Started
Tip
• You see the following indicators when the memory card is in
use:
: Appears when the card is inserted.
: Appears when the card is damaged or unusable.
: Appears when the card is being written or read.
: Appears when the card is being formatted.
Connecting the Stereo Handsfree
1. Open and rotate the connector cover halfway around.
2. Connect the Stereo Handsfree.
Removing the Memory Card
1. Open the memory card slot cover and slightly push the
card so it pops out. Remove the card and close the
cover.
Note
• Make sure that the phone is turned off before removing the
memory card.
• Do not remove the memory card while the memory card is
being formatted or written to.
Getting Started
15
Turning Your Phone On and Off
To turn the power on, long press F for approximately 2
seconds.
To Enter the PIN Code
If activated you are asked to enter a PIN (Personal Identification
Number) code and handset lock code after turning on your
phone.
1. Enter your PIN code.
The PIN code is 4 to 8 digits.
2. Press
.
Note
• If your PIN code is entered incorrectly three times in a row,
the SIM/USIM card is locked. See “Enabling/Disabling the
PIN Code” on page 109.
• If the clock settings have not been entered, the date and time
entry screen is displayed (p. 102).
16
Getting Started
To Copy All Phonebook Entries from the SIM/USIM Card
When you insert the SIM/USIM card into your phone for the first
time and start the Phonebook application, you are asked
whether you wish to copy Phonebook entries on the SIM/USIM
card. Follow the on-screen instructions, or you can do it later
using the Phonebook menu as follows:
“Call Manager” → “Advanced” → “Copy All Entries”
1. Select “From SIM to Handset”.
Keypad Lock
You can lock the keypad to prevent it from being pressed
accidentally.
Locking the Keypad
1. Long press P in standby.
To unlock, long press P.
Tip
• Emergency numbers (999, etc.) can be entered and dialled
regardless of the keypad lock.
Display Indicators (Main Display)
1.
/
: Strength of received signal/Service out of
range
: 3G (UMTS)/GPRS
Indicator area
: GSM/GPRS
: Roaming outside network
2.
Left soft
key
:
3.
:
4.
/
Off Line Mode [enabled]
Data exchange with external device
:
Connection to the server [established/
communicating]
Voice call [incoming/in progress]
5.
:
6.
/
:
Memory card inserted
7.
/
/
8.
:
9.
:
10.
/
: Video calling communication mode enabled
[voice and video/voice/video]
Diverts set to “Voice calls” of “All Calls”
Secure WAP page displayed
/
: Alerts [text message/multimedia message/
email]
Centre key Right soft
key
Getting Started
17
11.
12.
/
/
/
/
:
/ / :
Connection status
[USB working/IrDA standby/IrDA working/
Bluetooth standby/Bluetooth working/Talking
with the Bluetooth headset]
Java™ application [executed (colour)/
suspended (grey)]
13. (No display)/
/ / / / :
Current profile [Normal/Meeting/Activity/Car/
Headset/Silent]
14.
/ :
Silent/vibration setting [silent/increasing
volume/vibration enabled/silent and vibration
enabled/increasing volume and vibration
enabled]
15.
18
/
/
/
/
/
: Speaker mode [speaker phone/speaker
activated/microphone muted]
Getting Started
16.
:
Battery level
17.
:
18.
/
Daily alarm enabled
19.
:
20.
/
21.
:
Voice mail message alert
22.
:
Connection status [1st IrDA communication
[enabled/exchanging information]]
23.
:
Phone Lock enabled
24.
:
Keypad Lock enabled
25.
/(blank): IrDA setting [enabled/disabled]
26.
/
:
Schedule entry enabled [with/without
reminder alarm]
Outbox contains unsent messages [text
message/multimedia/email]
/
: WAP/OTA provisioning alerts [WAP alert/OTA
provisioning alert/WAP and OTA provisioning
alerts]
:
Phonebook Search Mode
Display Indicators (External Display)
12:00
Status Indicators
1.
:
Battery level
2.
/
: Strength of received signal/Service out of
range
3.
/
4.
:
:
Voice call incoming
Missed events
5.
:
Video calling incoming
6.
:
Call in progress
7.
:
Alerts [messages/Delivery Report]
8.
:
WAP Push service
9.
:
Daily alarm enabled
Getting Started
19
Navigating Functions
All applications are accessed from the Main menu. To open the
Main menu, press the centre key ( ) in standby.
To launch applications, you will need to highlight menu items,
and make selections. To select a menu item (indicated in
quotation marks), move the cursor using a, b, c and d,
and press
to select.
In certain procedures, you will need to press one of the soft
keys (indicated in square brackets), which are displayed in the
lower left and right of the screen. Press the corresponding soft
key (A or C).
To return to the previous screen, press the right soft key if it
displays Back. To close the Main menu, press the right soft key
if it displays Exit.
Each section in this user guide starts with a list of items you will
need to select in order (indicated in italics) before performing
the procedures shown. Select each item to reveal the next set
of items that you have to select. Open subsection items after
opening those listed in the main section.
Example:
“Call Manager” → “Phonebook” → “Add New”
20
Navigating Functions
Voice Call/Video Calling Functions
Making a Voice Call
1. Enter the area code and the phone number you wish to
dial and press D to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
Emergency Calls
1. Enter 999 or 911 (international emergency number)
using the keypad and press D to dial.
Note
• Emergency calls may not be able to be made on all mobile
phone networks when certain network services and/or
phone features are in use. Contact your network operator for
more information.
• This emergency number can normally be used to make an
emergency call in any country, with or without a SIM/USIM
card inserted, if a 3G (UMTS)/GSM network is within range.
International Calls
1. Long press Q until a + (international dialling prefix)
sign is displayed.
2. Enter the country code, followed by the area code
(without the leading zero) and the phone number, and
press D to dial.
Adding an Entered Phone Number to the Phonebook
1. After entering a phone number, press [Options] and
select “Save Number”.
For details on creating a new entry, see “Add New” on
page 42.
Showing or Hiding My Phone Number on the Display of
the Called Party
1. After entering a phone number, press [Options] and
select “Hide My ID” or “Show My ID”.
Voice Call/Video Calling Functions
21
Speed Dialling
Answering a Voice Call
Up to 8 phone numbers from the Phonebook memory (Handset
and SIM/USIM) can be assigned to speed dials. You can call the
numbers using the digit keys (G to O). The phone number
of the Voice mail centre is assigned to G.
For details on setting the speed dial list, see “Speed Dial List”
on page 46.
1. To dial a number using the speed dial, long press any of
the digit keys (G to O).
The phone number saved in the speed dial list is dialled.
When an incoming call is detected, the phone rings.
1. Press D or [Answer] to answer the call.
Or press any key (except F, U and [Busy]) when the
“Any Key Answer” function is enabled. Set the Any Key
Answer function in the profile of each mode (p. 98).
Redialling
You can redial numbers in the call log. Select from specific
categories or “All Calls”. Specific categories contain up to 30
numbers and the “All Calls” list contains up to 90.
1. Press D in standby.
2. Select the category from “All Calls”, “Dialled Numbers”,
“Missed Calls” or “Received Calls”.
To switch logs, press c or d.
3. Highlight the phone number you wish to call.
4. Press D to redial the call.
22
Voice Call/Video Calling Functions
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
• If the number is a restricted number, the display shows
“Withheld”.
• When you receive a call from the person whose picture is
registered in the Phonebook, the picture, name and phone
number are displayed.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you
do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller.
Incall Menu (Voice Call)
Your phone has additional functions available while a call is in
progress.
Adjusting the Earpiece Volume
During a call, you can adjust the earpiece volume (and
handsfree volume, if connected).
1. Press V or W to display the Earpiece Volume screen.
2. Press V (or a/d) to increase the volume of the call or
press W (or b/c) to decrease the volume.
3. Press
Putting a Call on Hold
This function allows you to manage two calls at the same time.
If you wish to make another call while you are talking to
someone, you can put the current call on hold to call someone
else.
To Make Another Call during a Call
1. During a call, press [Options] and select “Hold”.
The current call is put on hold.
2. Press [Options] and select “Dial New Number”.
3. Enter the phone number you wish to make another call
to, then press D.
Tip
• You can also make another call by entering the phone
number during a call instead of step 1. The current call is
automatically put on hold.
when the volume is set to the desired level.
Turning the Speaker On and Off
You can talk via the loud speaker on the back of the phone by
turning it on.
1. During a call, press [Options] and select “Loudspeaker
On”.
Voice Call/Video Calling Functions
23
Accessing SMS/MMS Menu during a Call
1. During a call, press [Options] and select “Messages”.
The following options are available: “Create Message” to
make an SMS and MMS, or “Inbox”, “Sent” or “Drafts” to
access these folders. For details on SMS, see “SMS” and
“MMS” on page 54.
Call Waiting
This service notifies you of another incoming call while you
have a call in progress.
1. During a call, press [Options] and select “Hold &
Answer” to answer the second call.
The first call is put on hold and you can now talk to the
second caller.
Note
• You need to set “Call Waiting” to “On” if you use the Call
Waiting service (p. 105).
• Call Waiting service may not be available on all networks.
Contact your network operator for more information.
• If you do not wish to answer the second call, press [Options]
and select “Busy” in step 1. If “Reject” is selected, the log of
the second call is saved as a missed call.
24
Voice Call/Video Calling Functions
Conference Call
Conference call is a call with more than 2 participants. You may
include up to 5 participants in a conference call.
To Make a Conference Call
You must have one active call and one held call.
1. During a call, press [Options] and select “Multi Party”.
2. Select “Conference All” to join the conference call.
3. Press F to end the conference call.
Note
• The conference call service may not be available on all
networks. Contact your network operator for more
information.
• You have more options for the Conference call in step 2:
• To put all participants on hold, select “Hold All”.
• To put all participants except the current call on hold,
select “Private”.
• To end the call with all participants, select “End Active
Call(s)” or “End Held Call(s)”.
• To reject adding more participants to the current party,
press [Options] and select “Reject”, or you can send the
busy tone by selecting “Busy”.
To Add New Participants to the Conference Call
1. Press [Options] and select “Dial New Number”.
2. Enter the number you wish to include in the conference
call and press D to dial.
3. Press [Options] and select “Multi Party”.
4. Select “Conference All” to join the conference call.
If you wish to add other participants, repeat steps 1 to 4.
To End the Call with a Conference Call Participant
1. During a conference call, highlight the person that you
wish to disconnect from the conference call.
2. Press [Options] and select “End Active Call(s)” or “End
Held Call(s)”.
To Have a Private Conversation with One of the Participants
If you wish to have a private conversation with one of the
participants, you may select the participant from the
conference list and put the other participants on hold.
1. During a conference call, select the person that you wish
to talk to.
2. Press [Options] and select “Multi Party”.
3. Select “Private”.
4. Once you have finished the private conversation, press
[Options] and select “Multi Party”.
5. Select “Conference All” to return to the conference call.
Muting the Microphone
1. During a call, press [Mute].
To unmute the microphone, press [Unmute].
Voice Call/Video Calling Functions
25
Making a Video Calling
Answering a Video Calling
Note
• Use this function with only the video calling enabled phones.
• Make sure that the battery is fully charged and the signal is
strong before using this function.
• Turn the loud speaker on or use a switch-equipped Stereo
Handsfree or handsfree kit so that you can talk while looking
at the video calling screen on the main display.
When an incoming call is detected, the phone rings.
1. Press S or D to answer the call by video or A
[Answer] to answer the voice only.
Making a Video Calling
1. Enter the area code and the phone number you wish to
dial and press S, or press [Options] and select “Video
Calling” to dial.
If you enter the wrong number, press U to delete the
number to the left of the cursor.
When the line is connected, the image of the called party is
displayed upper on the screen, and yours lower left.
Tip
• If the called party’s phone is not video calling enabled, you
can press F and enter the phone number again to make a
voice call.
26
Voice Call/Video Calling Functions
Tip
• If you have subscribed to the Calling Line Identification (CLI)
service and the caller’s network sends the number, the
caller’s number is displayed on the screen. If the caller’s
name and number are saved in the Phonebook, the caller’s
name and phone number are displayed on the screen.
Rejecting an Incoming Call
1. Press F while the phone is ringing to reject a call you
do not wish to answer.
Letting the Caller Know You are Unavailable
1. Press [Busy] while the phone is ringing to send a busy
tone to the caller.
Incall Menu (Video Calling)
Muting the Microphone
1. During a video calling, press [Mute].
To unmute the microphone, press [Unmute].
Switching Images
You can switch images between the main and sub screens.
1. During a video calling, press [Options] and select
“Switch Images”.
Changing the Image of Yourself
1. During a video calling, press [Options] and select
“Camera Picture”.
2. Select “Internal Camera”, “External Camera” or
“Alternative Image”.
“Internal Camera”:
The image through the internal
camera is displayed and sent to
the party.
“External Camera”:
The image through the external
camera is displayed and sent to
the party.
“Alternative Image”:
The camera is turned off and the
image selected in “Alternative
Image” of “Video Calling
Settings” (p. 108) is used.
Turning the Speaker On and Off
You can talk via the loud speaker on the back of the phone by
turning it on.
1. During a video calling, press [Options] and select
“Loudspeaker On”.
Note
• In a high-noise environment, you may not be able to
continue a call, or make a clear call. We recommend that you
use the Stereo Handsfree.
• With this option, you may not be able to continue a call
without interruption if you increase the earpiece volume. We
recommend that you decrease the earpiece volume or use
the Stereo Handsfree.
Voice Call/Video Calling Functions
27
Video Calling Settings
To Adjust the Video Exposure
To Change the Quality of the Incoming Image
You can adjust the quality of the called party’s image.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Incoming Picture Quality”.
1. During a video calling, press [Options] and select “Video
3. Select “Normal”, “Quality Prior” or “Frame Rate Prior”.
“Normal”:
“Quality Prior”:
“Frame Rate Prior”:
The standard quality is used.
The quality of the picture takes
precedence over the frame rate.
The frame rate takes
precedence over the quality.
To Turn the Backlight On or Off
You can turn on the backlight of your screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Backlight”.
3. Select “Always On”, “Always Off” or “As Normal
Setting”.
When “Always On” is selected, the backlight will always be
on during a video calling.
When “As Normal Setting” is selected, the backlight will
time out depending on the Backlight setting (p. 100).
28
Voice Call/Video Calling Functions
Calling Settings”.
2. Select “Exposure”.
3. Press a (Bright) or b (Dark).
Mirror Image
During a video calling, you can reverse your image on the sub
screen.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Mirror Image”.
3. Select “On” or “Off”.
To Change the Sub Camera Image to the Alternative Image
During a video calling, you can switch the image shown to the
caller between the sub camera image and an alternative image
or display an image while putting a call on hold from the saved
picture files.
1. During a video calling, press [Options] and select “Video
Calling Settings”.
2. Select “Alternative Image” or “Hold Guidance Pict”.
3. Select “Preset Picture” or “Picture Gallery”.
Using the Menu
List of Menu Functions
Menu No./Main Menu
Top Menu
1
Games & Applications
2
Browser
3
Organiser
1. Press
in standby.
The Main menu is displayed.
2. Press a, b, c or d to highlight the desired menu,
then press
to access the function.
The sub menu is displayed.
For details on the menu options, see “List of Menu
Functions”.
1
2
3
4
1
2
3
4
5
6
7
8
9
10
11
12
1
2
3
4
5
6
7
8
9
10
Menu No./Sub Menu1
GSX™ & Java™ Gallery
Set Java™ Wallpaper
Java™ Settings
Java™ Information
Homepage
Go to URL
Bookmarks
Alert Inbox
My Saved Page
Access History
Browser Settings
News
Music
Sports
Games
What’s New?
Calendar
Alarms
Calculator
Voice Recorder
Stopwatch
Tasks
World Clock
Countdown Timer
Expenses Memo
Phone Help
Using the Menu
29
Menu No./Main Menu
4
5
6
30
Messages
1
2
3
4
5
6
7
8
9
10
11
12
Menu No./Sub Menu1
Create Message
Inbox
Alert Inbox
Drafts
Templates
Sent
Outbox
Voice Mail
Cell Broadcasts
Area Info
Messaging Settings
Memory Status
1
2
3
4
5
6
7
8
1
2
1
2
3
4
5
6
7
Picture Gallery
Video Gallery
SD VIDEO
Sound Gallery
GSX™ & Java™ Gallery
Text Templates
Other Documents
Memory Status
TV & Video
Music Player
Phonebook
Manage Group
Speed Dial List
My Card
Message Groups
Phonebook Settings
Advanced
Menu No./Main Menu
9
Settings
7
Media Player
8
Call Manager
Using the Menu
Menu No./Sub Menu1
Profiles
Display Settings
Sound Settings
Time & Date
Language
Call Settings
Video Calling Settings
Security Settings
Card Settings
Master Reset
1
2
3
4
5
6
1
2
3
4
5
6
All Calls
Dialled Numbers
Missed Calls
Received Calls
Call Timers
Data Counter
Bluetooth
Infrared
Network Settings
Internet Settings
Off Line Mode
Backup/Restore
10 SIM Application
Camera
Gallery
1
2
3
4
5
6
7
8
9
10
11 Call Log
12 Connectivity
Entering Characters
When entering characters to create Phonebook entries, SMS or
MMS, etc., press the corresponding keys.
In multi-tap input method, press each key until the desired
character is displayed. For example, press H once for the
letter “A” or twice for the letter “B”.
Multi-tap Mode
Pressing each key scrolls characters in the following order.
N
O
Q
P
Multi-tap Mode keys
Upper Case
Characters
Key
G
H
I
J
K
L
M
Upper Case
Characters
Key
Lower Case
Characters
Numeric
. (full-stop) , (comma) - (hyphen) ? !
’ (apostrophe) @ :1
1
ABC2
abc2
2
DEF3
def3
3
GHI4
ghi4
4
JKL5
jkl5
5
MNO6
mno6
6
PQRS7
pqrs7
7
R
Lower Case
Characters
Numeric
TUV8
tuv8
8
WXYZ9
wxyz9
9
(space)+ = < > € £ $ ¥ % & 0
0
Switches character case among four modes:
Abc, ABC, 123 and abc.
.
@
_
+
&
˜
%
,
/
(
)
{
}
∆
Ξ
?
\
<
>
å
ì
Φ
¤
!
#
[
]
ä
ñ
Γ
:
*
$
Å
æ
Ñ
Λ
;
=
£
Ä
à
Ö
Ω
'
|
¥
Æ
Ç
Ø
Π
''
^
€
Ü
É
ö
Ψ
SP
¿
§
ü
è
ø
Σ
↵
¡
ß
ù
é
ò
Θ
G-O:
Q:
Long press to enter 1 - 9 numbers.
P:
Long press to shift between multi-tap and T9
mode.
R:
Long press to display the Input Language
screen.
Long press to enter space in Numeric mode
or to enter 0 in other modes.
Entering Characters
31
Changing the Input Language
Tip
In T9 or multi-tap mode, you can switch input mode as follows
by pressing P.
1. On the text entry screen, press [Options].
2. Select “Input Language”.
3. Select the desired language.
English/T9 mode
Changing the Input Method
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the input method you wish to use.
32
English/Multi-tap mode
Input Method
Input Language
= English
Input Language
= Traditional
Chinese
Input Language
= Simplified
Chinese
T9 Mode
T9 Abc
T9 ABC
T9 abc
T9 Stroke
T9 Stroke
T9 PinYin
Multi-tap mode
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Abc
ABC
abc
Numeric
Others
Symbol Table
Symbol Table
Symbol Table
Entering Characters
Traditional Chinese/T9 mode
Simplified Chinese/T9 mode
Tip
• If you press Q instead of step 6, a space is inserted next
to the selected word.
User Dictionary
You can create your own English words for T9 Alphabet text
input.
T9 English Mode
Using T9 English Mode
T9 text input method is a shortcut to enter text easily and
quickly.
1. On the text entry screen, press [Options].
2. Select “Input Method”.
3. Select the T9 mode (T9 Abc, T9 ABC, T9 abc) you wish
to change. “
”is displayed on the main display.
4. Press the keys to enter characters.
5. Press a or b to select the word you wish to input.
6. If you wish to clear the word, highlight it and long press
U.
Note
• This function is only available when “Input Language” is set
to “English”.
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Select “Add New Word” and enter a new word.
To edit a word in the list
1. On the text entry screen in T9 mode, press [Options] and
select “User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the word.
7. Press
or select [Options] and “Done” to complete
the selection.
Entering Characters
33
T9 PinYin and T9 Stroke Mode
In T9 PinYin and T9 Stroke mode, keys are as follows.
T9 PinYin and T9 Stroke Mode keys
Key
G
H
I
J
K
L
M
N
O
P
Q
R
34
Stroke
PinYin
abc
def
ghi
jkl
Wildcard
mno
pqrs
tuv
wxyz
Change Input Method
Space
Go to the FullWidth Symbols screen.
Entering Characters
G-O:
P:
R:
Long press to input corresponding Chinese
character displayed in the candidate field.
Long press to enter tones “
T9 PinYin mode .
” in
Long press to display the Input Language
screen.
Changing the Input Method between Stroke and PinYin
See “Changing the Input Method” on page 32.
Using Stroke Mode (Traditional)
The following is an example of entering “
1. Change the input mode to T9
Stroke mode.
”.
2. Press IGJ to display the
corresponding stroke for “
”.
3. Long press the corresponding key
to complete the selection (in this
case, M).
Using PinYin Mode
Input field
Long press the
corresponding numeric key
to select the desired
character directly from the
Candidate field.
Candidate field
The following is an example of entering “ ”.
1. Press K for the first letter of the reading, then highlight
“l”.
Note
• Each Traditional/Simplified Chinese mode has own T9
Stroke mode. The screen examples in steps 1 to 3 are
displayed when you select “Traditional Chinese” in the Input
Language option.
Entering Characters
35
2. Press J for the vowel of the first letter, then highlight
“li”.
Characters with the same reading are displayed in the
Candidate field.
3. Select the desired character.
4. Long press corresponding numeric key to enter the
desired character (in this case, H).
Tip
• When the cursor is placed after the first character, the
Candidate field displays characters most likely to follow.
36
Entering Characters
• If you want to use tone options, long
press P instead of step 3 to
display the desired character.
The tone symbols are displayed in
the Candidate field.
Press the corresponding numeric
key (H).
Chinese User Dictionary
You can create your own word list for T9 Chinese input.
You can enter Chinese characters, alphabet, symbols and
numbers. Only capital letters can be used for acronyms.
Note
• This function is only available when “Input Language” is set
to “Traditional Chinese” or “Simplified Chinese”.
Deleting a Word
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Delete”.
4. Press [Yes] or [No].
Creating a New Entry
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Select “Add New Word”.
3. Enter new word.
4. Enter acronym.
Editing a Word in the List
1. On the text entry screen, press [Options] and select
“Chinese User Dictionary”.
2. Highlight the desired word.
3. Press [Options] and select “Edit”.
4. Modify the entry word.
5. Modify the acronym.
Entering Characters
37
To Call the Entry
Examples of entry words and acronyms:
The illustration below assumes that the example entry words
and acronyms are already stored.
1. Press M and highlight “S”.
This example is using
If you long press G, “ ” will be T9 PinYin mode
entered.
You can also select the other
words starting with the same
acronym by pressing b.
Press b
2. Press H and highlight “SB”.
If you long press G, “
will be entered.
38
Entering Characters
”
Note
• Acronyms are available for T9 PinYin mode only.
• You can also enjoy word completion or predictive input of the
words stored in the Chinese User Dictionary.
When the first three characters of a word are entered, the
whole word appears at once.
The following is an example of predictive input and word
completion. This example uses words stored in the last section.
1. Press H, K, I and long
This example is using
press H to enter “ ”.
Stroke input method
2. The character “ ” appears at for Simplified
.
(Candidates and are taken
from the Chinese User
Dictionary.)
3. Long press N to enter “
”.
4. Long press O to enter “
”.
The sentence is completed
automatically.
Note
• Word completion does not take place if the entry word has
less than four Chinese characters.
• Predictive characters from the Chinese User Dictionary
appear at , so you only have to press O to enter the
characters.
If there are entry words which start with the same characters
such as “
” and “
”, candidates “ ” and “ ”
appear at or , depending on the sequence in which the
words are saved.
Symbols and Punctuations
1. On the text entry screen, press [Options].
2. Select “Add Symbol”.
The first symbol page is displayed.
In Chinese input mode, the FullWidth Symbols screen is
displayed.
3. Press a or b to switch pages (HalfWidth Symbol and
FullWidth Symbol Pages), or use the numeric keys G
or H.
Tip
• R is a shortcut to launch Symbol Tables.
Entering Characters
39
Using Templates
Insert Phonebook Entries
You can use the sentences registered in Text Templates when
entering characters.
For details on creating the text template, see “Adding Phrases
to Text Templates” on page 78.
1. On the text entry screen, move the cursor to the point
you wish to insert the template.
2. Press [Options] and select “Advanced”.
3. Select “Insert Template”.
4. Select the desired text template.
The selected text template is inserted.
You can insert the entries registered in Phonebook when
entering characters.
For details on creating the Phonebook entries, see “Call
Manager” on page 41.
1. On the text entry screen, move the cursor to the point
you wish to insert the Phonebook Entry.
2. Press [Options] and select “Advanced”.
Copying, Cutting and Pasting Text
1. On the text entry screen, press [Options] and select
“Advanced”.
2. Select “Copy” or “Cut”.
3. Move the cursor to the first letter to be copied or to be
cut, then press
.
4. Move the cursor to the last letter to highlight the area,
then press
.
5. Move the cursor to the point you wish to paste the
letters.
6. Press [Options] and select “Advanced”.
7. Select “Paste”.
40
Entering Characters
3. Select “Insert Phonebook Entry”.
4. Select the desired Phonebook Entry.
The selected entry is inserted.
Call Manager (M 8)
You can store the phone numbers and Email addresses of your
friends, family and colleagues in the Phonebook.
Your phone can store up to 500 entries. In a Phonebook, you
can save the following items:
Items Saved in the Handset Memory
Picture
(file name)
Assign Tone/Video
(file name)
Secret
(On or Off)
Items Saved in the SIM/USIM Memory
Name
up to 16 characters
Last Name
up to 16 characters
Add Phone Number
1 phone number (up to 32 digits)
First Name
up to 16 characters
Add Email Address
1 Email address (up to 38 characters)
Add Phone Number
up to 3 phone numbers (up to 32
digits each)
Group
up to 16 groups
Add Email Address
up to 3 Email addresses (up to 128
characters each)
Group
16 groups
Street Name
up to 64 characters
City Name
up to 64 characters
State Name
up to 64 characters
Postal Code
up to 20 characters
Country Name
up to 32 characters
Note
up to 256 characters
Birthday
(date)
Note
• Each item depends on SIM/USIM Cards.
Call Manager
41
Changing the List Displayed
Add New
“Call Manager” → “Phonebook Settings” → “Source”
1. Select “Handset” or “SIM”.
You can choose either the phone or SIM/USIM card memory
locations to store the new entry. For switching locations, see
“Selecting the Storage Memory”.
The amount of phone numbers that you can store to the SIM/
USIM card is dependent on its capacity. Contact your network
operator for details.
“Call Manager” → “Phonebook” → “Add New”
If you select the “Choice” option for the memory to be used, the
selection is between “To Handset” and “To SIM”.
1. Select the field you wish to fill in, and enter the relevant
information.
2. Press [Save] when finished.
Selecting the Storage Memory
“Call Manager” → “Phonebook Settings” → “Save to”
1. Select “Handset”, “SIM” or “Choice”.
Sorting the Phonebook List Order
You can change the listing order of the Phonebook entries
between by pinyin order or by group.
“Call Manager” → “Phonebook Settings” → “View
Phonebook”
1. Select “By PinYin” or “By Group”.
Selecting the Search Mode
“Call Manager” → “Phonebook Settings” → “Search
Mode”
1. Select “Character Search”, “PinYin Search” or “English
Search”.
42
Call Manager
Tip
• To create an entry, at least one field must be filled (“Last
Name”, “First Name”, “Add Phone Number” or “Add Email
Address” for the handset memory; “Name”, “Add Phone
Number” or “Add Email Address” for the SIM/USIM memory).
Adding a Thumbnail to Entries
“Call Manager” → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”.
3.
4.
5.
6.
Select “Picture”.
Select “Assign Picture”.
Select the desired picture.
Press [Save] when finished.
Note
• If you delete a picture in the handset memory, the
corresponding thumbnail is also deleted.
Viewing My Card (M 8-4)
You can register and edit your own information in the
Phonebook as with other Phonebook entries.
“Call Manager” → “My Card”
Copying Phonebook Entries between SIM/
USIM Card and Handset
Note
• When you insert the SIM/USIM card into your phone for the
first time and start the Phonebook application, the
confirmation screen is displayed automatically, asking you if
you wish to copy or not. The number of Phonebook entries to
be copied varies depending on the SIM/USIM capacity.
• If the memory space is not enough to save all entries, you
cannot complete copying.
Dialling from the Phonebook
“Call Manager” → “Phonebook”
1. Highlight the desired entry and press D.
Tip
• If more than one phone number is registered for the entry,
highlight the desired phone number after step 1 and press
D.
• You can also dial from the details screen of the Phonebook.
On the details screen, select the desired phone number and
press D.
“Call Manager” → “Advanced” → “Copy All Entries”
1. Select “From SIM to Handset” or “From Handset to
SIM”.
Call Manager
43
Editing Phonebook Entries
Deleting Phonebook Entries
“Call Manager” → “Phonebook”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Edit”.
Deleting All Phonebook Entries
“Call Manager” → “Advanced” → “Delete All Entries”
1. Select “Handset Entries” or “SIM Entries”.
2. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
3. Modify the information.
4. Press [Save] when finished.
Assigning a Ringtone or a Ring Video Clip
File to Each Entry
“Call Manager” → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Edit”, then select “Assign
Tone/Video”.
3. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
7. Press [Save] when finished.
44
Call Manager
Deleting a Phonebook Entry
“Call Manager” → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Delete”.
Manage Group (M 8-2)
Different ringtones can be set for each group. If you do not
change a group ringtone, the ringtone assigned in the Settings
menu is used.
“Call Manager” → “Manage Group”
1. Highlight the desired group.
2. Press [Options] and select “Assign Tone/Video”.
3. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
4. Select “Assign Tone” or “Assign Video”.
When selecting “Assign Video”, go to step 6.
5. Select “Preset Sounds” or “Sound Gallery”.
6. Select the desired tone or video clip.
For details on selecting a ringtone or a ring video clip file in
the Settings menu, see “Assigning a Ringtone” or
“Assigning a Ring Video Clip File” on page 96.
Note
• You can only edit group names in the SIM/USIM card. You
cannot edit the ringtone or ring video settings.
Editing the Group Name
You can edit group names to be assigned to the Phonebook
entries. First, change the Phonebook displayed (p. 42).
“Call Manager” → “Manage Group”
1. Highlight the desired group name.
2. Press [Options] and select “Edit Name”.
3. Modify the name.
Message Groups (M 8-5)
You can create a mailing list to send the same message to a
group of recipients at once. Up to 5 groups can be registered.
Creating a New Mailing List
“Call Manager” → “Message Groups” → “Add New
Group”
1. Enter the group name.
The new group name is displayed following the last group
on the Group List screen.
Call Manager
45
Adding Recipients to a Group
Up to 20 recipients can be registered in each list.
“Call Manager” → “Message Groups”
1. Select the desired group name.
2. Select “Assign New Entry”.
3. Select the desired entry.
The detailed screen is displayed.
4. Select the desired phone number or Email address.
Tip
• If you modify the entry assigned in the group, you need to
reassign it to the group. Press [Options] and select “Reassign Entry”in step 2.
• To remove an entry from the group, press [Options] and
select “Remove Entry” in step 2.
• To remove a group, highlight a group name and press
[Options] and then select “Delete” in step 1.
Sending a Message Using a Mailing List
“Call Manager” → “Message Groups”
1. Highlight the desired group name.
2. Press [Options] and select “Create Message”.
3. Select the desired type of messaging.
For further procedures, see “Creating a New Message” on
page 54.
46
Call Manager
Memory Status
This function helps you to check the memory used in the
Phonebook.
“Call Manager” → “Advanced” → “Memory Status”
Speed Dial List (M 8-3)
You can set a maximum of 8 phone numbers in the Speed Dial
list (p. 22).
Setting Phonebook Entries in the Speed Dial List
“Call Manager” → “Phonebook”
1. Select the desired entry.
2. Highlight the desired phone number.
3. Press [Options] and select “Add to Speed Dial”.
4. Select the desired location.
Tip
• The nine digit keys correspond to list numbers.
To Edit the Speed Dial List
“Call Manager” → “Speed Dial List”
1. Highlight the entry you wish to edit.
2. Press [Options] and select “Re-Assign” (or “Assign”).
Sending a Phonebook Entry
Receiving a Phonebook Entry
When the phone receives a Phonebook entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Phonebook. Press [No]
to reject.
“Call Manager” → “Phonebook”
1. Highlight the desired entry.
2. Press [Options] and select “Send Phonebook”.
Tip
• For details on entering Infrared or Bluetooth wireless
settings, see “Connectivity” on page 113.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
Sending a Voice Clip Message or Video Clip
Message Using an Address from the
Phonebook
For “As Message”
For details, see “MMS” on page 54.
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
For “Via Infrared”
For details, see “Infrared” on page 115.
“Call Manager” → “Phonebook”
1. Highlight the desired entry including the phone number
or Email address you wish to use.
2. Press [Options] and select “Create Message”.
3. Select “Voice Message” or “Video Message”.
For further procedures, see “Creating a New Message” on
page 54.
Call Manager
47
Camera (M 5)
Your phone has a built-in digital camera that allows you to take
pictures and record video clips wherever you are. This section
starts with basic functions and operational procedures to take,
save and send pictures and video clips, followed by common
and unique functions to camera and video modes.
Taking Pictures
“Camera”
1. Press
to take the picture.
The shutter sounds and the still image of the taken picture
is displayed.
2. Press [Save].
The taken picture is saved in Gallery.
To cancel, press [Cancel].
To send the taken picture, press
in step 2.
Note
• When the video camera is launched, press [Options] and
select “Go to Photo Camera”, or press c.
• When you try to send the picture that has too large a file size,
the picture size is resized for the message. The original sized
picture is saved in Gallery.
48
Camera
Tip
• You can activate the camera by long pressing Y. Simply
press Y to take pictures, and start and stop recording.
Taking a Self-Portrait
You can take a self-portrait while looking at the main display.
“Camera”
1. Press [Options] and select “Switch to Int. Camera”.
Or press H in the viewfinder mode.
2. Press
to take the picture.
3. Press [Save].
The taken picture is saved in Gallery.
To return to the external camera, press [Options] and select
“Switch to Ext. Camera” or press H in the viewfinder
mode.
Recording Video Clips
You can record a video clip with your phone.
Recording Video Clips
“Camera”
The preview is displayed on the screen.
1. Press
.
2. To stop recording, press
.
3. Select “Save”.
The video clip is saved in Gallery.
To view the preview before saving, select “Preview”.
To send the video clip, select “Save and Send”. Then select
the desired way you wish to send. For further procedures,
see “Creating a New Message” on page 54.
Note
• You can only send video clips when “For Message” is
selected for the recording time. For details, see “Selecting
the Recording Time” on page 53.
Common Functions in the Photo and Video
Camera Modes
Using the Digital Zoom Function
To Adjust the Zooming Ratio
1. In the viewfinder mode, press a or b.
Once the phone has returned to standby, the zoom settings
return to default.
Adjusting the Exposure
“Camera” → [Options] → “Exposure”
1. Press a (Bright) or b (Dark).
: (Bright → Normal → Dark)
Once the phone has returned to standby, the brightness
settings return to default.
Camera
49
Using the Self-Timer
Select the appropriate option.
“Camera” → [Options] → “Modes” → “Self-timer”
(Photo Camera Mode)
“Camera” → [Options] → “Self-timer” (Video Camera
Mode)
1. Select “On” or “Off”.
“ ” is displayed on the screen when you select “On”.
Selecting the Storage Memory
Select the appropriate option.
“Camera” → [Options] → “Settings” → “Save New
Pictures”
“Camera” → [Options] → “Settings” → “Save New
Videos”
1. Select the desired location from “To Handset Memory”,
“To Memory Card” or “Choice”.
Switching between the Photo and Video Camera Modes
You can switch between the photo and video camera modes by
pressing c or d.
Select the appropriate option.
“Camera” → [Options] → “Go to Video Camera”
“Camera” → [Options] → “Go to Photo Camera”
Note
• If you select “Choice”, select the desired location every time
you save.
Selecting the Picture or Video Quality
Select the appropriate option.
“Camera” → [Options] → “Picture Quality”
“Camera” → [Options] → “Video Quality”
1. Select the desired picture or video quality.
: Super Fine
: Fine
: Normal
Note
• The better quality you select, the larger file size is needed.
50
Camera
Auto Save
You can set the phone to save pictures and video clips
automatically.
“Camera” → [Options] → “Settings” → “Auto Save”
1. Select “On” or “Off”.
Anti-flicker
“Camera” → [Options] → “Settings” → “Anti-flicker”
1. Select “Mode 1: 50Hz” or “Mode 2: 60Hz”.
Functions in the Photo Camera Mode
Using the Help Function
“Camera” → [Options] → “Help”
Common Shortcut Keys
If multiple options exist, they switch each time you press each
following key.
Photo Camera
G
H
J
K
Video Camera
Max Zoom/Min Zoom
Change External Camera/Internal Camera
Save New Pictures to
Picture Size
L
M
N
P
Q
Save New Videos to
Selecting the Picture Size
You can select the size of pictures. All taken pictures are saved
in the JPEG format.
“Camera” → [Options] → “Picture Size”
1. Select the desired size.
(External Camera) 960 × 1280 dots/768 × 1024 dots/
480 × 640 dots/240 × 320 dots/
120 × 160 dots
(Internal Camera) 240 × 320 dots/120 × 160 dots
Microphone On/Off
Picture Quality
Video Quality
Self-Timer On/Off
Exposure
Switches Viewfinder
Switches Screen
Note
• The “Switches Screen” option is available in “Preview”
before you save a video clip. See “Recording Video Clips” on
page 49.
Camera
51
Continuous Shoot
You can take continuous shoots in various options.
“Camera” → [Options] → “Modes” → “Continuous
Shoot”
1. Select the desired mode.
The following continuous shoot modes are available:
“Off”:
The continuous shoots are
cancelled.
“4 Pictures”/“9 Pictures” ( / ):
Takes 4 or 9 pictures continuously.
After selecting this mode, select
from five types of speed or
“Manual”.
“Overlapped” ( ): Overlaps continuous pictures into
one picture and makes an
afterimage.
After selecting this mode, select
“Fast” or “Normal”.
Note
• When you select “Manual” to take continuous pictures,
press
manually in the desired speed.
• When the Timer and Continuous Shoot functions are
simultaneously set, “ ” (for “4 Pictures”, for example) is
displayed instead.
• “9 Pictures” and “Overlapped” are not available for picture
sizes larger than 240 × 320 dots.
52
Camera
Selecting a Frame
You can select the frame from preset patterns or Picture
Gallery.
“Camera” → [Options] → “Modes” → “Add Frame”
1. Select “Preset Frames” or “Picture Gallery”.
2. Select the desired frame.
The selected frame is confirmed on the display.
3. Press
.
Note
• Images larger than 240 [W] × 320 [H] dots cannot be used.
Using the Full Screen
You can display the preview on the full screen without the soft
key area and indicator area.
“Camera” → [Options] → “Settings”
1. Select “Full Viewfinder”.
To return to the normal viewfinder, select “Normal
Viewfinder”.
Selecting the Shutter Sound
“Camera” → [Options] → “Settings” → “Shutter
Sound”
1. Select the desired shutter sound from 3 preset patterns.
Note
• Continuous Shoot uses the specialised shutter sound that
cannot be changed from the above settings.
• The shutter sound remains active even when “Ringer
Volume” (p. 95) is set to “Silent” to prevent unauthorised
use.
Functions in the Video Camera Mode
Selecting the Recording Time
“Camera” → [Options] → “Record Time”
1. Select “For Message” or “Extended Video”.
For Message (
): Limits the size to send a message
depending on service providers.
Extended Video (
): Less than 30 minutes (depending
on the memory).
2. Select “Large(QCIF)” or “Small(SubQCIF)” video format
for “For Message” and “QVGA(3gp)”, “QVGA(asf)”,
“Large(QCIF)” or “Small(SubQCIF)” format for “Extended
Video”.
Note
• If you select “For Message” for the recording time, the file
size is limited depending on the service provider. Therefore,
the quality is also limited for the setting.
• “Save and Send” is not displayed after recording in the
Extended Video mode.
Recording Video Clips with the Sound
To record a video clip with the sound, the microphone needs to
be activated.
“Camera” → [Options] → “Settings” → “Microphone”
1. Select “On” or “Off”.
Note
• The microphone is already turned on in the default setting.
Select “Off” to record a video clip without the sound.
• The file size of a video clip can be reduced if the sound is not
recorded.
Video Encoding
“Camera” → [Options] → “Settings” → “Video
Encode”
1. Select the appropriate format.
Camera
53
Messages (M 4)
Your phone allows you to send and receive text, multimedia and
Email, and receive WAP alerts as well.
SMS
SMS allows you to send text messages up to 765 characters
long. If you send a message of more than 160 characters, it is
split into several segments.
MMS
MMS allows you to send and receive multimedia messages of
up to 300 KB with images, sound, or video clips attached.
Email
Email allows you to send messages of up to 300 KB.
Note
• Some MMS functions may not always be available
depending on your network. Contact your network operator
for more information.
• Maximum message size varies depending on the settings by
the network operator.
Creating a New Message (M 4-1)
(SMS/MMS)
A → “Create Message” → “Message”
(Email)
A → “Create Message” → “Email”
1. Select the address field.
2. Select the desired method to enter the address.
3. For MMS, enter or select the Email address or phone
number from the Phonebook list. For SMS, enter or
select a phone number. For Email, enter or select an
Email address.
• To add multiple Email addresses or phone numbers,
highlight the recipient field, press [Options], select “Edit
Recipients”, then select “Phonebook”. Enter or select
the Email address or phone number from the existing
Phonebook.
• To change the recipient types, press [Options], select
“Edit Recipients”, then select “Change to CC” or
“Change to BCC”.
• To add a subject, press [Options] and select “Add
Subject”.
4. Place the cursor in the message field.
5. Enter the message.
54
Messages
6. Highlight the “Send” indicator in the lower left of the
screen. Press
and select “Send”.
After the message is sent, the message is moved to the
Sent Messages box.
Tip
• To send the same message to a group of recipients, select
“Select Group” in step 2, then select the desired group
name. For details on creating a mailing list, see “Creating a
New Mailing List” on page 45.
To Add a Slide Show
1. In step 5 in “Creating a New Message” on page 54,
press [Options] and select “Add Slide”.
If you wish to add more slides, select “Add Slide Before” or
“Add Slide After”.
2. Enter the message.
If you wish to set the duration of each slide, press [Options]
and select “Slide Duration”, then select the desired
duration.
To Remove or Replace Attachments
1. In step 5 in “Creating a New Message” on page 54,
press [Options] and select the corresponding remove
option for each attachment.
To Attach Gallery Data
1. In step 5 in “Creating a New Message” on page 54,
highlight the “Picture”, “Sound” or “Video” indicator in
the lower centre of the screen, and press
.
2. Select “Saved Picture Gallery”, “Saved Sound Gallery”
or “Saved Video Gallery”.
3. Select the desired file.
If you wish to take new pictures, record sounds or video
clips, select “Take Picture”, “Record Sound” or “Record
Video”.
• For attached pictures, select the appropriate resize
option, as the maximum message size for sending varies
depending on the network operator.
Tip
• You can create messages up to 300 KB. Each slide can
contain one picture and/or one sound file or video clip.
Messages
55
To Attach a Phonebook Entry
1. In step 5 in “Creating a New Message” on page 54,
highlight the “Options” indicator in the lower right of the
screen. Press
and select “Attach Phonebook”.
2. Select the desired entry.
If you wish to select your own Phonebook entry, select “My
Card”.
3. Select the desired field.
The selected information is entered.
To Attach a Schedule Entry
1. In step 5 in “Creating a New Message” on page 54,
highlight the “Options” indicator in the lower right of the
screen. Press
and select “Attach Appointment”.
2. Select the desired day including a schedule entry you
wish to add.
3. Select the desired schedule entry.
To Remove or Replace Attachments
1. In step 5 in “Creating a New Message” on page 54,
press [Options] and select the corresponding remove
option for each attachment.
56
Messages
Using the Sending Options
You can use the message sending options for each type of
message.
1. Highlight the “Send” indicator in the lower left of the
screen. Press
and select “Messaging Settings”.
• “Read Report” (“On”, “Off”) (MMS): Confirms whether or
not a report is sent notifying the sender that the message
has been read.
• “Delivery Report” (“On”, “Off”) (SMS/MMS): Enables or
disables Delivery Report when the message is
successfully sent to the recipient.
• “Expiry Time” (“Maximum”, “30 minutes”, “1 hour”, “6
hours”, “1 day”, “1 week”) (SMS/MMS): Sets Expiry
Time for a message to be saved in the server.
• “Priority” (“High”, “Normal”, “Low”): Prioritises
composed messages.
• “Delivery Time” (“No delay”, “30 minutes”, “1 hour”, “6
hours”, “1 day”, “1 week”) (MMS): Sets the time the
message is delivered after the Send key is pressed.
2. Highlight the “Send” indicator in the lower left of the
screen. Press
and select “Send”.
After the message is sent, the message is moved to the
Sent Messages box.
Note
• The current message size displayed while you are creating
the message is an approximation.
• If a message cannot be sent for some reason, the message
stays in the Outbox and the “ ” is displayed in standby.
Tip
• To save the message without sending, press [Options] and
select “Save to Drafts” in step 5 in “Creating a New
Message” on page 54.
• You can send the following items attached to multimedia
messages. Details are given in the following sections.
• Gallery data
• Phonebook entry
• File (Schedule entry created by Calendar, Phonebook
entry), etc.
• You can use the template option to help you compose
messages. For details on using this option, see “Using
Templates” on page 40.
Sending a Message in the Drafts Box (M 4-4)
A → “Drafts”
1. Select the desired tab, SMS/MMS or Email.
2. Press [Options] and select “Edit & Send”.
3. Modify the message, if necessary.
4. Highlight the “Send” indicator in the lower left of the
screen. Press
and select “Send”.
Reading MMS
Messages you receive are saved in the Inbox.
A → “Inbox”
1. Select the message you wish to view.
Storing the Phone Number of a Sender in the Phonebook
A → “Inbox”
1. Highlight the message from which you wish to store the
phone number or Email address.
2. Press [Options] and select “Save Address”.
The new Phonebook entry screen including the phone
number is displayed. For details on creating a new
Phonebook entry, see “Add New” on page 42.
Messages
57
Calling the Phone Number of a Sender Embedded in the
Message
A → “Inbox”
1. Highlight the message including the phone number you
wish to dial.
2. Press [Options] and select “Call Sender”.
Downloading a Single MMS
A → “Inbox”
1. Highlight the message alert ( ) you wish to download.
2. Press [Options] and select “Download”.
Tip
• You can download multiple messages at the same time. See
“Downloading Multiple MMS”.
Downloading Multiple MMS
A → “Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Multiple Select”.
3. Select the desired message alert using the “Select” or
“Select All” option.
4. Select “Download”.
The selected messages are downloaded at the same time.
58
Messages
Replying to a Message or to All Addresses
A → “Inbox”
1. Highlight the message the sender of which you wish to
reply to.
2. Press [Options] and select “Reply” or “Reply all”.
3. Select “Reply” or “Reply with History”.
4. Enter the message.
5. Highlight the “Send” indicator in the lower left of the
screen. Press
and select “Send”.
Forwarding a Message
A → “Inbox”
1. Highlight the message you wish to forward.
2. Press [Options] and select “Forward”.
3. Perform steps 1 to 5 in “Creating a New Message” on
page 54.
Sorting the Messages in the List
A → “Inbox”
1. Press [Options] and select “Advanced”.
2. Select “Sort”.
Reading Cell Broadcast Messages
A → “Cell Broadcasts” → “Read Messages”
1. Select the desired subject.
2. Scroll the screen to read the message.
3. Select the desired sort type.
3. Press [Back].
Locking or Unlocking the Messages
A → “Inbox”
1. Highlight the message you wish to lock or unlock.
2. Press [Options] and select “Advanced”.
Setting Languages for Cell Broadcast Messages
A → “Cell Broadcasts” → “Settings” → “Language”
The current language is displayed.
1. Press
.
2. Press
to check.
3. Select “Lock” or “Unlock”.
Cell Broadcasts (M 4-9)
You can receive cell broadcast messages or general messages
such as weather forecasts and traffic reports. This information
is broadcast to subscribers in certain network areas.
This function may not be available on all mobile phone
networks. Contact your network operator for more information.
Enabling/Disabling Cell Broadcasts
A → “Cell Broadcasts” → “Switch On/Off”
1. Select “On” or “Off”.
3. Press [Save].
Subscribing to Cell Broadcasts
Select the page of the cell broadcast message that you want.
A → “Cell Broadcasts” → “Settings” → “Set Info
Subjects” → [Options]
1. Select “Add/Remove”.
2. Select the desired page.
3. Press [Back].
Messages
59
Tip
• If the desired page is not in the list that appears in step 2,
select “Create Subject” in step 1, then enter the subject code
to add a page. For details on the subject code, contact your
service provider.
Area Info (M 4-10)
The Area Info is the message information that operators send
to subscribers in certain areas.
When you receive Area Info, the message (area code) is
displayed in standby.
Enabling/Disabling Area Info
A → “Area Info”
1. Select “On” or “Off”.
Note
• This function may not be available on all mobile phone
networks. Contact your network operator for more
information.
• If Area Info is set to “On”, the standby time will decrease.
60
Messages
Messaging Settings (M 4-11)
General Settings
A → “Messaging Settings” → “General Settings”
1. Select the item you wish to set up.
• “Home Download”:
Controls message download timing inside your network
area.
“Always Download”:
Downloads messages
immediately from the server.
“Always Defer”:
Defers message download.
• “Roaming Download”:
Controls message download timing when roaming
outside of your network.
“Always Download”:
Downloads messages
immediately from the server.
“Always Defer”:
Defers message download.
• “Delivery Report”:
Enables or disables Delivery Report request.
• “Read Report”:
Enables or disables Read Report request.
• “Expiry Time”:
This indicates the number of days and hours for which
a message you send may remain undelivered to the
message recipient. During this period, the message
service centre will continually try to deliver the message
to the recipient.
• “Delivery Report Allow”:
Confirms whether or not a report is sent notifying the
sender when you receive an MMS/SMS.
• “Read Report Allow”:
Enables or disables Read Report Allow when the
recipient is required to inform the sender that the
message has been read.
• “Edit Signature”:
Opens the screen to enter the signature.
• “Auto Delete”:
Deletes the oldest message automatically, when the
Inbox, Sent Messages or both (Inbox and Sent
Messages) is full.
• “Automatic Resend”:
Tries to resend the failed SMS/MMS message up to two
times (“On” or “Off” selection).
• “Message List View”:
Switches the mailbox listing between “One-line View”
and “Two-line View”.
SMS Settings
A → “Messaging Settings” → “SMS Settings”
1. Select the item you wish to set up.
• “Message Centre”:
Enter the message centre number.
If you wish to enter a country code for a message to an
international number, long press Q until a + sign is
displayed.
• “Message Format”:
Select the message format to be used when creating a
new message.
• “Reply Path”:
Accepts or rejects the same reply path with the send
path when receiving the reply message for your
message.
Messages
61
MMS Settings
A → “Messaging Settings” → “MMS Settings”
1. Select the item you wish to set up.
• “MMS Accounts”:
Select the desired account or select “Create New” to
enter the following settings.
“Profile Name”:
MMS profile name (Unique name)
“Proxy”:
Proxy setting for MMS
“Relay Server URL”: MMS relay server
• “Slide Duration”:
Sets the duration of the slide.
• “Max Message Size”:
Defines the maximum size of downloaded and created
MMS messages.
• “Creation Mode”:
When set to “Free”, you can attach files of any format to
the mail. When set to “Restricted”, only certain formats
can be attached.
62
Messages
Email Settings
A → “Messaging Settings” → “E-mail Settings”
1. Select the item you wish to set up.
• “Email Accounts”:
Select the desired account or select “Create New” to
enter the following settings.
“Account Name”: Email account name (Unique
name)
“POP3 Server”:
Server name, user ID, password
and port number for POP3 server
“SMTP Server”:
Server name, user ID, password,
port number for SMTP server and
SMTP Authentication
“Access Point”:
Access point for Email
“Email Address”: Email address
• “Download Interval”:
Sets the download interval.
• “Max Message Size”:
Defines the maximum size of downloaded and created
MMS messages.
Browser (M 2)
Your phone is already configured to access SmarTone iN! and
the mobile internet.
SmarTone iN! is a new mobile internet portal which is your
gateway to a new world of information, games, music and
services.
Because your phone uses 3G (UMTS), it has a system that is
faster than previous ways of getting mobile information. Also,
the connection is ‘always on’ which means there is no need to
wait for dialling up. You only have to pay for the data you send
or receive, not how long you’re connected.
Your phone contains a WAP browser used for surfing on the
Mobile Internet, where you can get a lot of useful information.
Normally, pages are designed for a mobile phone.
Your phone is already setup to SmarTone iN! site for WAP/MMS
Settings.
Main Menu
“Browser” → “Homepage”
The SmarTone iN! service page is displayed.
“Browser” → “Go to URL”
The URL entry screen is displayed, allowing you to jump to a
site.
“Browser” → “Bookmarks”
See page 64.
“Browser” → “Alert Inbox”
WAP Push alerts are displayed.
“Browser” → “My Saved Page”
The saved screenshots are displayed.
“Browser” → “Access History”
The history of pages you have recently browsed is displayed.
“Browser” → “Browser Settings”
See page 66.
Browser
63
Navigating a WAP Page
• a b c d:
Move the highlights around in the screen.
•
:
Executes the option displayed in the lower
centre of the screen.
• A:
Launches the browser option menu.
• C:
Selects an action displayed in the lower right of
the screen.
Used to access “SmarTone iN!” by opening the
browser.
• F (short press):
Exits the browser.
(long press):
Turns off the phone.
64
Browser
Editing Bookmarks
“Browser” → “Bookmarks”
1. Select the desired URL, and press [Options].
You can edit the list of Bookmarks by the following options:
“Open”:
Selects a bookmark.
“Details”:
Displays detailed information of
the WAP page.
“Send page”:
Sends the URL address to
recipients.
“New”:
Creates new folders or
bookmarks.
“Rename”:
Renames bookmarks.
“Edit URL”:
Edits URL address of the
bookmark.
“Move”:
Moves bookmarks to another
location.
“Delete”:
Deletes bookmarks.
“Delete All”:
Deletes all bookmarks.
The Browser Options
You can use various options of the WAP browser.
C → [Options]
“Select”:
Selects a WAP page.
“Home”:
Goes to the homepage.
“Alert Inbox”:
Displays WAP Push alerts.
“Bookmarks”:
(see “Editing Bookmarks” on
page 64.)
“Mark Page”:
Marks the selected WAP page.
“Save This Link”:
Save the selected link.
“Save Items”:
Saves items from WAP pages.
“Go to URL”:
Goes to the WAP page that you
enter the URL address.
“Access History”:
Shows the history where you
have browsed.
“Forward”:
Goes to the next page of the
pages displayed.
“Reload Page”:
Reloads the WAP page again to
get new information.
“Advanced”:
Displays the advanced menus.
“Back”:
Exits the browser.
The Advanced Options
C → [Options] → “Advanced”
“My Saved Page”:
Displays the bookmarked pages.
“Save This Page”:
Saves the WAP page as the local
file.
“Send Page”:
Sends the WAP page data.
“Details”:
Shows detailed information of
the WAP page.
“Browser Data”:
Edits the browser data. You can
clear the cache/cookies/history.
“Search This Page”:
Searches specific words in the
WAP page.
“Copy Text”:
Copies the text on the web page.
“Browser Settings”:
Displays the Settings menus.
“Restart Browser”:
Restarts the browser.
“About”:
Displays the browser
information.
Browser
65
Browser Settings (M 2-7)
“Browser” → “Browser Settings”
“Font Size”:
Sets the size of the browsing
font.
“Scroll Step”:
Sets the speed of scrolling.
“Send Referrer”:
Enables or disables the
notification of the referrer.
“Cookies”:
Adjusts the setting of cookies.
“Downloads”:
Categorises downloading data
from the images/sounds/
objects.
“Security”:
Adjusts the security prompt
level.
“WAP Push”:
Sets whether you need
confirmation for push message.
“Download to”:
Sets the download location.
66
Browser
Media Player (M 7)
Media Player can play sound files and video clip files.
TV & Video (M 7-1)
Playing Back Video Clip Files
“Media Player” → “TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select the desired file.
To pause playback, press
.
To stop playback, press [Back].
Tip
• You can control the Video Player by using the following keys:
a/b: Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (long press): Fast-forwards.
c (long press): Rewinds.
Searching a File to Be Played Back
“Media Player” → “TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Press [Options] and select “Search”.
4. Enter the first few letters of the title.
Search results are displayed and the matching file is
highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Media Player” → “TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Highlight the file you wish to add to the playlist.
4. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on creating a
playlist, see “Adding a New Playlist” on page 68.
5. Select the desired folder.
6. Press
.
The file highlighted in step 3 is saved.
To delete files from the playlist, highlight the playlist and
press [Options]. Then select “Delete from Playlist”.
Media Player
67
Adding a New Playlist
“Media Player” → “TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Press [Options] and select “Add New Playlist”.
3. Enter the desired playlist name.
4. Press
.
Note
• To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Editing the Video Clip File
“Media Player” → “TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file you wish to edit.
4. Press [Options] and select “Edit”.
5. Select the desired option.
“Crop”:
“Subtitle”:
68
Media Player
Select the desired area to be cropped.
Create a subtitle to add to the file.
Settings
You can select a play mode for “Playback Pattern”, “Backlight”
and “Display Size” when playing back video clip files.
“Media Player” → “TV & Video” → “Video Gallery”
1. Select “Handset Memory” or “Memory Card”.
2. Select “All Videos” or the desired playlist.
3. Select the file for which you wish to adjust the play
mode.
4. Press [Options] and select “Settings”.
5. Select “Playback Pattern”, “Backlight” or “Display
Size”.
6. Select from the following:
• “Playback Pattern”
“Normal”:
Plays back all files in the selected
folder once and stops playback.
“Repeat”:
Continues playback in the selected
folder.
“Repeat All”:
Plays back all files in the selected
folder.
“Random”:
Plays back files in the selected
folder at random.
• “Backlight”
“Always On”:
“Always Off”:
Lit while the file is played back.
Unlit while the file is played back
even if a key is pressed.
“Normal Settings”: Works with the main backlight
setting (p. 100).
• “Display Size”
“Original Size”:
Displays the file in its original size.
“Enlarge”:
Displays the file in an enlarged
size.
“Full Screen”:
Displays the file on the full screen.
SD Video
Video clips that are recorded by a video camera or downloaded
from mobile Internet sites can also be managed with SD Video.
“Media Player” → “TV & Video” → “SD Video”
1. Select the desired file.
To pause playback, press
.
To stop playback, press C.
To delete files from the playlist, highlight the playlist, press
[Options] and select “Delete”.
Music Player (M 7-2)
Music Player can play MP3, AAC-LC and AAC+ format sound
files. While playing back sound files in the background, you can
use other menus.
Playing Back Sound Files
“Media Player” → “Music Player” → “My Music”
1. Select “All Music” or the desired playlist.
2. Select the desired file.
To pause playback, press
.
To stop playback press [Back].
Note
• You are asked whether or not to play sounds when the Silent
mode is activated.
• To play the last played file, select “Last Played Music”.
“Currently Playing” is displayed when the file is being played
back.
Downloading Video Clip Files
“Media Player” → “TV & Video” → “Download Videos”
The video clip file download site is displayed.
Media Player
69
Tip
• You can return to the Main menu screen while playing back
the file in the background.
• You can create your playlist selecting only the desired files
(p. 71).
• You can select the playback pattern in step 2. Press
[Options] and select “Playback Pattern”.
“Normal”:
Plays back all files in the selected folder
once and stops playback.
“Repeat”:
Continues playback in the selected folder.
“Repeat All”:
Plays back all files in the selected folder.
“Random”:
Plays back files in the selected folder at
random.
• You can control the Music Player by using the following keys:
a/b: Increases or decreases the volume.
b (long press): Mutes.
d: Jumps to the next file.
c: Returns to the top portion of the current file.
d (long press): Fast-forwards.
c (long press): Rewinds.
F: Plays back the file in the background.
70
Media Player
Searching a File to Be Played Back
“Media Player” → “Music Player” → “My Music”
1. Select “All Music” or the desired playlist.
2. Press [Options] and select “Search”.
3. Enter the first few letters of the title.
Search results are displayed and the matching file is
highlighted.
Adding a File to the Playlist
You can create a playlist registering desired files.
“Media Player” → “Music Player” → “My Music”
1. Highlight the file you wish to add to the playlist.
2. Press [Options] and select “Add to Playlist”.
The playlists are displayed. For details on adding a playlist,
see “Adding a New Playlist” on page 71.
3. Select the desired folder.
4. Press
.
The file highlighted in step 1 is saved.
To delete the playlist, highlight the playlist and press
[Options]. Then select “Delete Playlist”.
Adding a New Playlist
“Media Player” → “Music Player” → “My Music”
1. Press [Options] and select “Add New Playlist”.
2. Enter the desired playlist name.
3. Press
.
Downloading Music Files
“Media Player” → “Music Player” → “Download
Music”
The music file download site is displayed.
Note
• This service is not available with some service providers.
Please contact your service provider for more information.
Media Player
71
Gallery (M 6)
Gallery contains several types of picture, sound and video clip
data. Also included in Gallery are frequently used text message
phrases and accessed WAP pages (addresses) which you can
use. You can also transmit picture, sound and video clip data
via infrared or Bluetooth wireless technology to OBEX-enabled
phones.
Picture Gallery (M 6-1)
Pictures that are taken by a digital camera or images that are
downloaded from mobile Internet sites can be managed. You
can register pictures in the following formats: JPEG, PNG,
WBMP and GIF.
Viewing Pictures
“Gallery” → “Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
Switching the Memory Source
“Gallery” → “Picture Gallery”
1. Select the file you wish to view.
The selected picture is displayed.
To display the list from the memory card, press d.
To go back to the handset memory, press c.
72
Gallery
Using Images as Wallpaper
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to use as wallpaper.
2. Press [Options] and select “Set as Wallpaper”.
Saving an Image to Phonebook Entries
You can use this option only for pictures saved in the handset
memory.
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to add to Phonebook.
2. Press [Options] and select “Save to Phonebook”.
To overwrite, select the data you wish to save.
To save as a new entry, select “As New Contact”.
For details on entering a name, see “Add New” on page 42.
Editing Pictures
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to edit.
2. Press [Options] and select “Picture Editor”.
3. Select the desired option.
Note
• “Picture Editor” may not be available depending on the
original picture and copyright issued.
Adjusting the Size
You can adjust the picture to an appropriate size depending on
the scene.
“Gallery” → “Picture Gallery”
1. Highlight the file you wish to adjust the size of.
2. Press [Options] and select “Resize”.
3. Select the desired option.
Note
• “Resize” may not be available depending on the original
picture and copyright issued.
Downloading Picture Files
“Gallery” → “Picture Gallery” → “Download More”
The picture file download site is displayed.
Video Gallery (M 6-2)
Video clips that are recorded by a video camera or video clips
that are downloaded from mobile Internet sites can be
managed.
Playing Back Video Clip Files
“Gallery” → “Video Gallery”
1. Select the file you wish to play back.
2. Press
.
To pause playback, press
.
To resume, press
again.
To stop playback, press [Back].
To display the list from the memory card, press d.
To go back to the handset memory, press c.
Tip
• For other option menus, see “Common Option Menus” on
page 75.
Gallery
73
Using a Video Clip as a Ring Video
You can set your video clip to play back when the phone rings.
“Gallery” → “Video Gallery”
1. Highlight the desired video clip.
2. Press [Options] and select “Set as Ring Video”.
Tip
• For other option menus, see “Common Option Menus” on
page 75.
Downloading Video Clip Files
“Gallery” → “Video Gallery” → “Download More”
The video clip file download site is displayed.
Sound Gallery (M 6-4)
The downloaded sound files and the AMR data recorded by
Voice Recorder are managed in Sound Gallery. The default
ringtones are not contained within Sound Gallery. Only the
sound files you can play back with the phone are stored in
Sound Gallery.
Playing Back Sound Files
“Gallery” → “Sound Gallery”
1. Select the file you wish to play back.
To stop playback, press
.
74
Gallery
Note
• This option may not be available in all regions.
Switching the Memory Source
“Gallery” → “Sound Gallery”
1. Press d.
The tab switches and the list is displayed from the memory
card. To go back to the handset memory, press c.
2. Select the desired sound file.
Using the Sound Files as a Ringtone
“Gallery” → “Sound Gallery”
1. Highlight the file you wish to use as a ringtone.
2. Press [Options] and select “Set as Ringtone”.
Note
• AMR format music files cannot be used for ringtones.
Tip
• For other option menus, see “Common Option Menus” on
page 75.
Other Documents (M 6-7)
Some types of files are stored in the Other Documents folder of
the phone. You can edit and use these files as Gallery data.
Opening the Document File
“Gallery” → “Other Documents”
1. Select the desired file.
Tip
• For other option menus, see “Common Option Menus”.
Common Option Menus
Activating Files with Copyright Protection (DRM)
Some pictures, sound files, and video clips have a digital copy
protection program, which is called DRM (Digital Rights
Management). You need to activate the digital licence
permission to open the files. Files protected with DRM are
displayed with
.
Select the appropriate option.
“Gallery” → “Picture Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Other Documents”
1. Highlight the file you wish to activate.
Note
• Some pictures with DRM may not open even when an
attempt is made to activate it.
Sending Gallery Data
Select the appropriate option.
“Gallery” → “Picture Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For details on creating a message, see “Creating a New
Message” on page 54.
For details on Bluetooth settings, see “Bluetooth” on
page 113.
For details on Infrared settings, see “Infrared” on
page 115.
2. Press [Options] and select “Activate”.
Gallery
75
Note
• Pictures/Sounds/Video clips protected by copyright cannot
be sent attached to a message, with the exception of
Separate Delivery files.
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving Gallery Data
When the phone receives Gallery data, a confirmation message
is displayed in standby.
1. Press [Yes].
The received data is saved in the corresponding Gallery
folder.
Tip
• For details on Infrared or Bluetooth wireless settings, see
“Connectivity” on page 113.
76
Gallery
Using Gallery Data
You can copy, move, sort, rename, and delete the saved Gallery
data.
Select the appropriate option.
“Gallery” → “Picture Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Advanced”.
3. Select the desired option.
“Move”:
“Copy”:
“Create Folder”:
“Multiple Select”:
“Sort”:
Moves files to another folder. Select
the desired folder to move to.
Copies files. Select the desired folder
to copy to.
Creates a new folder.
Selects multiple files.
Sorts the file. Select the desired files
to sort.
To Rename the File
Select the appropriate option.
“Gallery” → “Picture Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Rename”.
To Delete the File
“Gallery” → “Picture Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Other Documents”
1. Highlight the desired file.
2. Press [Options] and select “Delete”.
To See the Gallery Details
Select the appropriate option.
“Gallery” → “Picture Gallery”
“Gallery” → “Video Gallery”
“Gallery” → “Sound Gallery”
“Gallery” → “Other Documents”
1. Highlight the file you wish to view the details of.
Selecting Multiple Files
You can select more than one item from Gallery for moving,
copying and deleting.
Note
• The following procedure applies when the entries other than
“Get new” are highlighted.
Select the appropriate option.
“Gallery” → “Picture Gallery” → [Options]
“Gallery” → “Video Gallery” → [Options]
“Gallery” → “Sound Gallery” → [Options]
“Gallery” → “Other Documents” → [Options]
1. Select “Advanced”.
2. Select “Multiple Select”.
3. Press
to check the desired file names.
4. Press [Options] and select the desired option.
Tip
• To remove the check, select the file again or select
“Unselect” in step 4.
• If you wish to select all files, select “Select All” in step 4. To
unselect all, select “Unselect All”.
2. Press [Options] and select “Details”.
Gallery
77
Text Templates (M 6-6)
You can register up to 50 text templates for use in text
messages and multimedia messages. The maximum capacity
of the text templates is 100 KB.
Adding Phrases to Text Templates
“Gallery” → “Text Templates” → “Add New Template”
1. Enter the text and press
.
Editing Text Templates
“Gallery” → “Text Templates”
1. Highlight the text template you wish to edit.
2. Press [Options] and select “Edit”.
To view the text template, press [Options] and select
“View”.
To delete the text template, press [Options] and select
“Delete”.
3. Modify the text and press
.
78
Gallery
Sending Text Templates
“Gallery” → “Text Templates”
1. Highlight the text template you wish to send.
2. Press [Options] and select “Send Template”.
Memory Status (M 6-8)
This function helps you to check the memory status of the
handset memory or memory card. Memory status covers the
following.
Handset Memory: Applications, Pictures, Videos, Sounds,
Others, Total and Free
Memory Card:
Pictures, Videos, Sounds, Others, Total
and Free
“Gallery” → “Memory Status”
1. Select “Handset Memory” or “Memory Card”.
Games & Applications (M 1)
GSX™ & Java™ Gallery (M 1-1)
The list of Java™ applications is displayed.
Downloaded applications are displayed in order starting from
the latest one.
Executing Applications
“Games & Applications” → “GSX™ & Java™ Gallery”
Downloaded applications are sequentially displayed from the
latest one.
1. Select the title of the application you wish to execute.
The selected application is executed. When using network
connection type applications, connection to the network
can be selected.
2. To end the application, press F and select “End”.
Setting a Screensaver Application
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired screensaver application.
2. Press
.
The confirmation screen to set a screensaver is displayed.
3. Press [Yes].
Downloading Applications
“Games & Applications” → “GSX™ & Java™ Gallery”
→ “Download More”
1. Select the application you wish to download.
The confirmation screen is displayed after various WAP
browser screens.
2. Press
to start downloading.
3. Press
when finished.
Games & Applications
79
Setting Security Level
You can set the security level for selected Java™ applications.
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Security Level”.
3. Select one of the following options:
“Network Access”:
“Messaging”:
“Auto Run”:
“Local Connection”:
“Read User Data”:
“Write User Data”:
“Use Multimedia”:
“Location Access”:
“Reset”:
80
Games & Applications
Sets security to access the
network.
Sets security to perform MMS and
SMS messaging.
Sets security to perform the Auto
Run function.
Sets security to access local
contents.
Sets security to read user data,
such as Phonebook entries,
mailbox (Inbox) and Gallery data.
Sets security to write entries in
your phone, such as Phonebook
entries, mailbox (Inbox) and
Gallery data.
Sets permission to use the
multimedia recording.
Sets security to update the
positioning function.
Clears all the above settings.
4. Select one of the following options:
“Session”:
“Ask once”:
“Blanket”:
“No”:
The confirmation message is not
displayed until you exit the
application, while execution of the
API of the specified function group
is authorised.
The confirmation message is
displayed every time the API of the
specified function group is
executed.
The confirmation message is not
displayed until the application is
deleted or you change the
settings, while execution of the API
of the specified function group is
authorised.
Execution of the API of the
specified function group is not
authorised.
Note
• To clear all the permission settings, select “Reset” in step 3.
• All permissions are not available for all Java™ applications.
Setting Network Access
In order to allow Java™ applications to access to the network,
you need to set the network access.
“Games & Applications” → “GSX™ & Java™ Gallery”
→ [Options] → “Security Level” → “Network Access”
1. Select “Session”, “Ask once”, “Blanket” or “No”.
Viewing Application Information
You can check the information of Java™ applications.
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Information”.
Deleting an Application
You can delete an application from the handset memory.
“Games & Applications” → “GSX™ & Java™ Gallery”
1. Highlight the desired Java™ application.
2. Press [Options] and select “Delete”.
Set Java™ Wallpaper (M 1-2)
You can set Java™ Wallpaper for the standby screen.
Switching the Java™ Wallpaper On or Off
“Games & Applications” → “Set Java™ Wallpaper” →
“Switch On/Off”
1. Select “On” or “Off”.
Note
• If you select “On” and a Java™ Wallpaper is not set, a list
displaying available Java™ Wallpaper is displayed, asking
you to make a selection.
Set Applications
“Games & Applications” → “Set Java™ Wallpaper” →
“Set Applications”
The downloaded applications are displayed.
1. Select the desired Java™ Wallpaper.
Games & Applications
81
Java™ Settings (M 1-3)
Application Volume
You can set the volume of the application such as the sound
effect to one of the five levels or silent. When “Application
Volume” is set to “Silent”, this setup has priority.
“Games & Applications” → “Java™ Settings” →
“Application Volume”
The current volume level is displayed.
1. Press a (or d) to increase the volume or press b (or
c) to decrease the volume and then press
.
Backlight
“Games & Applications” → “Java™ Settings” →
“Backlight” → “Switch On/Off”
1. Select “Always On”, “Always Off” or “Normal Settings”.
“Always On”:
Lights while the application is
operated. Blinks when the blink
setting is on.
“Always Off”:
Turns off while the application is
operated even if a key is pressed.
“Normal Settings”: Works with the main backlight setting
(p. 100). Blinks when the blink setting
is on.
82
Games & Applications
To Set the Blinking Operation
This setting enables the backlight to be controlled by the
application. If set to “Off”, the backlight cannot be turned on
from the application.
“Games & Applications” → “Java™ Settings” →
“Backlight” → “Blink”
1. Select “On” or “Off”.
Vibration
When the vibrator is set in the application, you can choose
whether the operation is enabled or not.
“Games & Applications” → “Java™ Settings” →
“Vibration”
1. Select “On” or “Off”.
Calls & Alarms
You can set the priority of incoming calls and alarms while an
application is operating.
“Games & Applications” → “Java™ Settings” → “Calls
& Alarms”
1. Select “Voice Call”, “Video Calling”, “Incoming
Message” or “Alarm”.
2. Select the desired method.
• “Call Priority”, “Message Priority” or “Alarm Priority”:
The application is suspended automatically, and you can
receive a call or a message, or the alarm will sound. After
finishing the call or the message, or the alarm ends, the
suspend indicator ( ) is displayed letting you know there is
a suspended application.
• “Call Notice”, “Message Notice” or “Alarm Notice”:
The marquee (character scrolls) is displayed on the first line
of the screen while the application continues. If you press
D, the application is suspended, and you can receive a call
or a message. After finishing the call or the message, the
suspend indicator ( ) is displayed letting you know there is
a suspended application.
Java™ Information (M 1-4)
The information about the licences belonging to Java™ is
displayed.
Games & Applications
83
Organiser (M 3)
Calendar (M 3-1)
Calendar allows you to easily schedule appointments or events
at any given date or time.
These entries can also be sent via infrared or Bluetooth
wireless technology to a PC to share the same schedules.
When you exchange entries with other devices, the date and
time displayed may be different to that of the original data
depending on the data format of the receiving device.
Creating a New Entry
“Organiser” → “Calendar”
1. Select the desired day to which you wish to add an
event.
2. Press [Options] and select “Add New Entry”.
3.
4.
5.
6.
7.
84
Enter the subject.
Enter the location.
Select the desired category.
Enter the start date and then enter the start time.
Select the duration.
When selecting “Other”, enter the desired reminder date
and time.
Organiser
8. Select the reminder time.
When selecting “Other”, enter the desired reminder date
and time.
9. Press [Save].
Note
• If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 102).
• The reminder will not sound when “Ringer Volume” (p. 95) is
set to “Silent”.
To Change the Type of the Reminder Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Assign Tone/Video”.
3. Select “Assign Tone” and then select “Preset Sounds”
or “Sound Gallery”, or select “Assign Video”.
4. Select the desired sound or video clip file.
For details on selecting a tone, see “Assigning a Ringtone”
on page 96.
To Change the Duration of the Reminder Tone or Video
1. On the New Entry screen, select “Reminder”.
2. Select “Today” to display today or “Enter Date” to enter
2. Select “Duration”.
3. Select the time period.
Tip
• In the monthly or weekly view, you can control the view by
using the following:
Monthly view
P:
Displays the previous month.
R:
Displays the next month.
Q:
Displays the weekly view.
K:
Moves the cursor to today.
c/ d :
Moves the cursor to left (the previous day) or to
right (the next day).
a/ b :
Moves the cursor upward (last week) or
downward (next week).
Weekly view
P:
Displays the previous week.
R:
Displays the next week.
Q:
Displays the monthly view.
K:
Moves the cursor to today.
c/ d :
Moves the cursor to left (the previous day) or to
right (the next day).
a/ b :
Moves the weekly view up or down (the previous
hour or next hour).
When you select “Other”, you can enter the desired time in
two digits using the keypad.
To Change the Repeat Option of the Reminder
1. On the New Entry screen, select “Repeat”.
2. Select the desired repeat option.
To Enter the Description
1. On the New Entry screen, select “Description”.
2. Enter a memo for the schedule entry.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to
leave it as it is.
Viewing a Schedule Entry
“Organiser” → “Calendar”
1. Select the day you wish to view.
the desired date.
To Search By Date
1. In any view, press [Options] and select “Go to”.
Organiser
85
Editing a Schedule Entry
“Organiser” → “Calendar”
1. Select the day you wish to edit.
2. Press [Options] and select “Edit”.
3. Select the desired item and modify the entry.
4. Press [Save].
Deleting Schedule Entries
1. In any view, press [Options] and select “Delete”.
2. Select the desired option.
“This Appointment” (daily view):
Deletes the selected entry.
“All This Day”:
Deletes all entries for the selected
day.
“All This Week” (weekly view):
Deletes all entries for the selected
week.
“Up to Last Week” (weekly view):
Deletes all entries before this week.
“All This Month” (monthly view):
Deletes all entries for the selected
month.
“Up to Last Month” (monthly view):
Deletes all entries before this month.
86
Organiser
“All Appointments” (weekly and monthly view):
Deletes all entries in this application.
Sending a Schedule Entry
“Organiser” → “Calendar”
1. Select the day including schedule entries you wish to
send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
For “Via Infrared”
For details, see “Infrared” on page 115.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
Receiving a Schedule Entry
When the phone receives a schedule entry, a confirmation
message is displayed in standby.
1. Press [Yes].
The received entry is saved in the Calendar.
Press [No] to reject.
Tip
• For details on entering Infrared or Bluetooth wireless
settings, see “Connectivity” on page 113.
Viewing the Memory Status
1. In any view, press [Options] and select “Memory
Status”.
Alarms (M 3-2)
Setting the Alarms
The alarm function allows you to be alerted at a specified time.
Note that you need to set the current date and time before
setting the alarm function if it has not been done already.
Note
• The alarm will not ring when “Ringer Volume” (p. 95) is set
to “Silent”.
“Organiser” → “Alarms”
1. Select the blank setting.
2. Enter the desired time.
3. Press [Save].
To Change the Type of Repeat Options
1. On the Set Alarm screen, select “Repeat”.
2. Select “Once Only”, “Every Day” or “Selected Days”.
“Once Only”:
“Every Day”:
The alarm sounds once only.
The alarm sounds every day at the
specified time.
“Selected Days”: The alarm sounds on the selected day of
the week at the specified time.
To Change the Type of Alarm Tone or Video Clip File
1. On the Set Alarm screen, select “Assign Tone/Video”.
2. Select “Assign Tone” and then select “Preset Sounds”
or “Sound Gallery”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone”
on page 96.
Organiser
87
To Change the Snooze of the Alarm Tone
1. On the Set Alarm screen, select “Snooze”.
2. Select the desired snooze option.
To Change the Alarm Volume
1. On the Set Alarm screen, select “Alarm Volume”.
2. Press a (or d) to increase the volume or press b (or
Calculator (M 3-3)
The calculator function performs the 4 arithmetic calculations
using up to 12 digits.
“Organiser” → “Calculator”
The calculator is displayed on the display.
Key operations for calculation are as follows:
c) to decrease the volume.
To Change the Vibration of Alarm Tone
1. On the Set Alarm screen, select “Vibration”.
2. Select “On”, “Link to Sound” or “Off”.
For details on selecting a vibration, see “Vibration” on
page 97.
To Change the Duration of the Alarm Tone
1. On the Set Alarm screen, select “Duration”.
2. Select the desired duration.
Resetting an Alarm Setting
“Organiser” → “Alarms”
1. Highlight the alarm you wish to reset.
2. Press [Options] and select “Reset Alarm”.
Resetting All Alarm Settings
“Organiser” → “Alarms” → “Clear All”
1. Press [Yes] or [No].
88
Organiser
To enter a decimal point, press P.
To clear the entered number or function, press U.
To do the calculations, press
.
To start a new calculation, press U.
Rate Conversion
You can also use the calculator as a currency calculator to
convert from/to a home currency using a conversion rate that
you enter.
To Set a Currency Conversion Rate
“Organiser” → “Calculator” → [Options] → “Currency
Converter” → “Exchange Rate”
1. Select “Domestic” or “Foreign”.
2. Enter the currency conversion rate.
To delete a digit, press U.
To Convert a Value
“Organiser” → “Calculator”
1. Enter the value to be converted.
2. Press [Options] and select “Currency Converter”.
3. Select “Convert to Domestic” or “Convert to Foreign”.
Voice Recorder (M 3-4)
Recording a Voice Clip
“Organiser” → “Voice Recorder”
1. Press
to start recording.
To stop recording before the recording time is over, press
.
2. Select “Save” to save the voice clip.
Note
• Press a (or V) or b (or W) to adjust the sound volume
when playing back the recorded file.
Sending Voice Clips
“Organiser” → “Voice Recorder”
1. Press
to start recording.
2. Press
to stop recording.
3. Select “Save and Send”.
For details on creating a message, see “Creating a New
Message” on page 54.
This allows you to record a voice clip, which can be used to
remind you of schedule entries or be sent within a multimedia
message. The recorded voice clip is saved in Sound Gallery.
Voice clips are saved in .amr format.
Organiser
89
Selecting the Record Time
“Organiser” → “Voice Recorder” → [Options] →
“Record Time”
1. Select “For Message” or “Extended Voice”.
When selecting “Extended Voice”, you can save the voice
clip only in a memory card automatically.
Selecting the Storage Memory
“Organiser” → “Voice Recorder” → [Options] → “Save
Recording To”
1. Select the desired location.
When selecting “Choice”, you can select the location when
saving a voice clip.
Stopwatch (M 3-5)
You can store 4 lap times when using the stopwatch function.
“Organiser” → “Stopwatch”
1. Press
to start.
Press [LAP] to view the lap time before the stopwatch
stops. Last 4 lap times are saved.
2. Press
to stop.
Tip
• You can save a record of lap time and stop time in Text
Templates by pressing [Options] and selecting “Save to
Templates”.
90
Organiser
Resetting Time
1. After stopping the stopwatch, press [Options] and select
“Reset”.
Tasks (M 3-6)
You can register your schedule as task entries for a given date
or time.
Creating a New Entry
“Organiser” → “Tasks”
1. Select “Add New Entry”.
2. Enter the subject.
3. Enter the due date and then due time.
4. Select the reminder time.
When selecting “Other”, enter the desired reminder date
and time.
5. Press [Save].
Note
• If the date and time settings have not been entered, the date
and time entry screen is displayed (p. 102).
To Change the Type of Alarm Tone or Video Clip File
1. On the Reminder screen, select “Assign Tone/Video”.
2. Select “Assign Tone” and then select “Preset Sounds”
or “Sound Gallery”, or select “Assign Video”.
3. Select the desired tone or video clip file.
For details on selecting a tone, see “Assigning a Ringtone”
on page 96.
To Change the Duration of Alarm Tone or Video
1. On the Reminder screen, select “Duration”.
2. Select the desired duration.
To Change the Description
1. On the New Entry screen, select “Description”.
To Make the Entry Secret
1. On the New Entry screen, select “Secret”.
2. Select “On” to make the data secret or select “Off” to
leave it as it is.
Sending a Task Entry
“Organiser” → “Tasks”
1. Highlight the task entry you wish to send.
2. Press [Options] and select “Send”.
3. Select “As Message”, “Via Bluetooth” or “Via Infrared”.
For “Via Bluetooth”
For details, see “Bluetooth” on page 113.
2. Enter a memo for the task entry.
For “Via Infrared”
For details, see “Infrared” on page 115.
To Make the Entry Completed or Uncompleted
“Organiser ” → “Tasks”
1. Highlight the desired entry.
Note
• When pairing, you need to enter your passcode when
establishing contact with a Bluetooth wireless technology
enabled device for the first time.
2. Press
.
3. On the view screen, press [Options] and select “Check”.
To make the entry uncompleted, select “Uncheck”.
Organiser
91
Viewing the Memory Status
“Organiser” → “Tasks”
1. Press [Options] and select “Memory Status”.
Deleting Entries
“Organiser” → “Tasks” → [Options] → “Delete”
1. Select the desired option.
“This Task”:
Deletes the selected entry.
“All Completed Tasks”: Deletes all checked entries.
“All Tasks”:
Deletes all entries.
World Clock (M 3-7)
Setting the Time Zone
“Organiser” → “World Clock”
1. Press [Edit].
2. Select “Set Time Zone”.
The current time zone is indicated on the world map.
3. Press c or d to change the time zone.
4. Press
.
To Set the Custom Time Zone
“Organiser” → “World Clock”
1. Press [Edit].
92
Organiser
2. Select “Set Time Zone”.
The current time zone is indicated on the world map.
3. Press [Options] and select “Set Custom Zone”.
4. Enter the desired city name and time.
Setting the Daylight Saving
“Organiser” → “World Clock”
1. Press [Edit].
2. Select “Daylight Saving”.
3. Select “On” or “Off”.
Countdown Timer (M 3-8)
“Organiser” → “Countdown Timer”
1. Enter the time to count.
You can set the time from 1 second to 60 minutes.
2. Press
to start counting.
3. Press
to pause.
Press
again to continue counting.
4. If the countdown has finished, press [Cancel] and then
press
to start the countdown again.
Editing the Countdown Time
1. In the countdown start screen, press [Options] and
select “Edit”.
2. Modify the desired time.
Expenses Memo (M 3-9)
You can record an expenses memo with predefined or edited
categories.
To Delete a Recorded Item
1. In the total view, select the desired item.
2. Press [Options] and select “Delete Item”.
The selected item is deleted from the list.
To Delete All Items
1. In the total view, select the desired item.
2. Press [Options] and select “Delete All”.
Recording in the Expenses Memo
“Organiser” → “Expenses Memo” → “Add New
Expense”
1. Enter the expenses using the digit keys.
2. Select the desired category.
Expenses memo is registered.
Editing the Category Name
“Organiser” → “Expenses Memo” → “Edit Category”
1. Select the desired category name.
2. Modify the name.
Viewing Totals
“Organiser” → “Expenses Memo” → “Totals”
Recorded expenses are displayed on the screen.
You can view the help list and use it to guide you in the phone’s
functions.
“Organiser” → “Phone Help”
1. Press a or b.
To Change Amount
Phone Help (M 3-10)
1. In the total view, select the desired item.
2. Press [Options] and select “Change Amount”.
3. Enter the desired amount using the digit keys.
Organiser
93
SIM Application (M 10)
You can enjoy applications on the SIM/USIM card. Please
contact your service provider for further details.
94
SIM Application
Settings (M 9)
Profiles (M 9-1)
The tone sound and vibration settings can be customised for
each profile according to your environment.
There are 6 profiles: “Normal”, “Meeting”, “Activity”, “Car”,
“Headset” and “Silent”.
Activating a Profile
“Settings” → “Profiles”
1. Select the desired profile.
Note
• When a profile is set, the corresponding indicator described
on page 18 is displayed in standby.
Tip
• Long press R to switch Profiles settings between the
mode most recently activated and Silent mode in standby.
Resetting Profile Settings
“Settings” → “Profiles”
1. Highlight the profile you wish to reset.
2. Press [Options] and select “Set to Default”.
3. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
Ringer Volume
You can adjust the ringer and general volume.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Volume”.
Each current volume level is displayed.
4. Select “For Incoming Call”, “For New Message” or
“General Volume”.
5. Press a (or d) to increase the ringer volume or press
b (or c) to decrease the ringer volume and then press
.
To select “Increasing Volume”, press a (or d) at level 5.
To select “Silent”, press b (or c) at level 1.
Settings
95
Tip
• You can select from two levels or an increasing volume,
when selecting the “Silent” profile.
Note
• “Increasing Volume” may not be assigned for “General
Volume”.
Assigning a Ringtone
You can select the ringtone from 28 tones including 5 patterns,
13 sound effects and 10 melodies. You can also select a sound
in Sound Gallery as the default ringtone excluding the AMR or
WAVE format.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3.
4.
5.
6.
7.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Calling”.
Select “Assign Tone”.
Select “Preset Sounds” or “Sound Gallery”.
Highlight the ringtone you wish to use.
To hear the demo play, press [Options] and select “Play”.
8. Press [Options] and select “Assign”.
96
Settings
Note
• Even if you delete a ringtone that uses a sound in Sound
Gallery, the setting remains the same and the default
ringtone sounds. If you delete a ringtone assigned for the
ringtone, the default ringtone is set.
Assigning a Ring Video Clip File
You can select a video clip file in Video Gallery as the default
ring video clip file.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3.
4.
5.
6.
Select “Ringtone/Ringvideos”.
Select “For Voice Call” or “For Video Calling”.
Select “Assign Video”.
Highlight the ring video clip file you wish to use.
To preview the file, press [Options] and select “Play”.
7. Press [Options] and select “Select”.
Message Notification
When receiving messages, your phone will notify you of their
arrival with the ringtone or ring video you specify.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
Keypad Tones
When the keypad tone is set on, you will hear a confirmation
tone each time you press any keys.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Ringtone/Ringvideos”.
4. Select “For New Message”.
5. Select “Assign Tone” or “Assign Video”.
3.
4.
5.
6.
If “Assign Tone” is selected, select “Preset Sounds” or
“Sound Gallery”.
6. Highlight the desired ringtone or ring video clip file.
For details on selecting a ringtone or a ring video, see
“Assigning a Ringtone” or “Assigning a Ring Video Clip
File” on page 96.
7. Press [Options] and select “Assign” (for a ringtone) or
“Select” (for a video clip).
Select “System Sounds”.
Select “Keypad Tones”.
Highlight the desired tone pattern.
Press [Options] and select “Assign”.
Vibration
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Vibration”.
4. Select “On”, “Link to Sound” or “Off”.
8. Select “For New Message” and select “Duration”.
9. Enter the desired duration.
Settings
97
Tip
• When the “Link to Sound” option is selected in step 4, the
vibrator synchronises with your selected melody to pulse in
time with the melody. Please note that not all melodies
support the “Link to Sound” option.
• When you select “On” or “Link to Sound” in step 4, “ ” is
displayed in standby.
Event Light
When the light option is on, the small light blinks while the
phone receives a call or message.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Event Light”.
4. Select “For Voice Call”, “For Video Calling” or “For New
Message”.
5. Select “On”, “Link to Sound” or “Off”.
Tip
• When the “Link to Sound” option is selected in step 5, the
small light pulses in time with the selected melody. Please
note that not all melodies support the “Link to Sound” option.
98
Settings
Status Light
When the light option is on, the small light blinks to let you
know when you have missed calls or new messages.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Status Light”.
4. Select “For Missed Call” or “For New Message”.
5. Select “On” or “Off”.
Any Key Answer
You can answer a call by pressing any key except F, U and
[Busy]. For details, see page 22.
“Settings” → “Profiles”
1. Highlight the profile you wish to customise.
2. Press [Options] and select “Personalise”.
3. Select “Any Key Answer”.
4. Select “On” or “Off”.
Setting the Display (M 9-2)
You can change the settings of the main and sub displays.
Setting the Main Display
Wallpaper
For the standby screen, 3 default pictures are provided.
Pictures taken with the digital camera or images downloaded
from a WAP site can be used for wallpapers.
Setting from Picture Gallery
“Settings” → “Display Settings” → “Wallpaper”
1. Select “Picture Gallery”.
2. Select the desired picture.
3. After displaying the picture, press
.
Note
• Some pictures cannot be used because of their picture and
data types.
• If the picture in Picture Gallery is already set, it is displayed
in step 1. Press [Change] and select the desired picture.
Assigning the Pictures
Pictures can be displayed when turning the power on or off,
when receiving an incoming call, or when operating the alarm.
Pictures taken with the digital camera or images downloaded
from a WAP site can be used.
To Set Built-in Pictures
“Settings” → “Display Settings” → “Assign Pictures”
1. Select the desired scene to set the picture to.
Select “Pattern 1”, “Pattern 2” or “Pattern 3” when you
select “Incoming” or “Alarm”.
To Set Saved Pictures
“Settings” → “Display Settings” → “Assign Pictures”
1. Select the desired scene to set the picture to.
2. Select “Picture Gallery”.
3. Select the desired picture.
4. After displaying the picture, press
.
5. Specify the area you wish to display using the navigation
keys.
Settings
99
Note
• Some pictures cannot be used because of their picture and
data types.
• If the picture in Picture Gallery is already set, it is displayed
in step 2. Press [Change] and select the desired picture.
To Select the Backlight Time Out
“Settings” → “Display Settings” → “Backlight” →
“Time Out”
1. Select the desired time.
Select “Off” to shut it off.
Setting the Greeting Message
You can set the message which is displayed when the phone is
turned on.
“Settings” → “Display Settings” → “Greeting
Message” → “Switch On/Off”
1. Select “On” or “Off”.
2. Select “Edit Message” and enter the message when you
select “On” in step 1.
Up to 10 characters can be saved as a message.
Adjusting the Brightness of the Backlight
You can adjust the brightness of the backlight of the screen
between 4 levels.
“Settings” → “Display Settings” → “Backlight” →
“Brightness”
1. Press a (Bright) and b (Dark) for maximum clarity.
2. Press
.
Backlight
The backlight will shut off if you do not press the keypad for a
certain length of time. You can specify a desired time to elapse
before the backlight shuts off, which will help conserve battery
life.
Tip
• When you purchase this phone, Backlight is set to 15
seconds.
100
Settings
Setting the Display Saving
The screen of this phone will automatically turn off after a given
amount of time. You can change the length of time before the
Display Saving goes into effect, which will help conserve
battery life.
Tip
• When you purchase this phone, Display Saving is set to 2
minutes.
“Settings” → “Display Settings” → “Display Saving”
1. Select the desired time.
Note
• Display Saving does not work while you are making a call,
using WAP, or using an application.
• To cancel the Display Saving: The display saving continues
until either a key is pressed or there is an incoming alert. The
first key press only cancels this function. You must press
another key in order to enter any numerical or text value.
1. Select “On” to turn external display on or “Off” to turn
external display off.
To Select the Backlight Time Out
“Settings” → “Display Settings” → “Sub Display” →
“Backlight”
1. Select the desired time out.
Select “Off” to shut the backlight off.
To Adjust the LCD Contrast
You can adjust the LCD contrast to suit certain lighting
conditions.
“Settings” → “Display Settings” → “Sub Display” →
“LCD Contrast”
1. Press a (Bright) or b (Dark) to adjust the contrast and
press
.
The LCD contrast can be adjusted to 9 levels.
Setting the External Display
To Turn On/Off the External Display
You can turn the external display on or off when the phone is
closed.
“Settings” → “Display Settings” → “Sub Display” →
“Switch On/Off”
Settings
101
To Set Incoming Indication
Caller number or registered caller name can be displayed on
the external display when receiving an incoming call.
“Settings” → “Display Settings” → “Sub Display” →
“Caller Display”
1. Select “On” or “Off”.
Sound Settings (M 9-3)
You can use this menu to check or edit the current Profiles
settings (except “Any Key Answer”).
Time & Date (M 9-4)
You need to set the correct time and date in order for your
phone’s various time-based functions to work correctly.
“Settings” → “Time & Date” → “Set Date/Time”
1. Enter the day, month and year using the digit keys.
2. Enter the time using the digit keys.
Tip
• When you enter the time in the 12-hour format, press a or
b to switch between am and pm. The order in which the
date and time is displayed is based on the format setting.
102
Settings
Setting the Daylight Saving
“Settings” → “Time & Date” → “Daylight Saving”
1. Select “On” or “Off”.
Setting the Time Zone
“Settings” → “Time & Date” → “Set Time Zone”
1. Press c or d to select the home city to set.
2. Press
.
Customising the Time Zone
“Settings” → “Time & Date” → “Set Time Zone” →
[Options] → “Set Custom Zone”
1. Enter the city name.
2. Enter the time-zone differences using the digit keys.
Press a or b to switch between – and +.
3. Press
.
Display Date & Time
You can display the calendar or the current date and/or time in
standby.
To Set the Clock Display
“Settings” → “Time & Date” → “Display Date & Time”
→ “Show Clock”
1. Select the desired clock type or “Off” to set clock display
off.
To Set the Calendar Display
“Settings” → “Time & Date” → “Display Date & Time”
→ “Show Calendar”
1. Select the desired calendar type or “Off” to set calendar
display off.
World Clock
For details, see page 92.
Selecting the Time Format
“Settings” → “Time & Date” → “Time Format”
1. Select “24 Hour” or “12 Hour”.
Setting the Calendar Format
“Settings” → “Time & Date” → “Calendar Format”
1. Select “Sunday-Saturday” or “Monday-Sunday”.
Language Setting (M 9-5)
You can change the language that the phone uses to display
messages.
“Settings” → “Language”
1. Select the desired language.
Tip
• You can also change the input language on the text entry
screen (p. 32).
Note
• If you select “Automatic” in step 1, the language preset on
the SIM/USIM card is selected.
• If the language preset on the SIM/USIM card is not
supported, then the default language of the phone is
selected.
Selecting the Date Format
“Settings” → “Time & Date” → “Date Format”
1. Select “D-M-Y”, “M-D-Y” or “Y-M-D”.
Settings
103
Call Settings (M 9-6)
Set various types of functions and services for voice calls.
Voicemail & Diverts
This service can be used to divert incoming calls that you
cannot answer. Calls can be diverted to another phone number
or to your Voice mail system.
Note
• This service may not be available on all mobile phone
networks. Contact your service provider for more
information.
To Set the Voice Mail Numbers
You can divert calls to the network Voice mail service centre.
Depending on whether you are inside or outside your network
area, you can set two Voice mail numbers, a number for your
home network area or for a roaming network area.
Note
• This service depends on the SIM/USIM card. Contact your
SIM/USIM card vendor for more information.
“Settings” → “Call Settings” → “Voicemail & Diverts”
→ “Voicemail” → “Settings” → “Voicemail Centre
Number”
1. Enter the desired phone number.
To Access the Voice Mail Centre
1. Long press G in standby.
104
Settings
To Activate the Voice Mail Service
“Settings” → “Call Settings” → “Voicemail & Diverts”
→ “Voicemail” → “Activate”
1. Select one of the following options:
“Always”:
Diverts all calls without ringing.
“When Busy”:
Diverts incoming calls while you
are talking on the phone.
“No Answer”:
Diverts incoming calls if you do not
answer a call within a certain
period of time.
“Not Reachable”:
Diverts incoming calls when your
phone has no network service or is
switched off.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
2. Press
.
To Activate the Diverts Service
Select the appropriate option.
“Settings” → “Call Settings” → “Voicemail & Diverts”
→ “Diverts”
1. Select “Activate” or “By Service”.
If you select “By Service”, you can select further divert
options.
2. Select “Always”, “When Busy”, “No Answer” or “Not
Reachable”.
If you select “No Answer”, select the period of time from 6
levels (05 to 30 seconds).
3. Enter a phone number to which you wish to divert calls
or search for it in the Phonebook (p. 43).
4. Press
.
Note
• When “Voice Calls” diverts are set to “Always”, “
displayed in standby.
” is
To Check the Diverts Status
“Settings” → “Call Settings” → “Voicemail & Diverts”
→ “Status”
1. Select the diverts option you wish to check.
To Deactivate the Diverts/Voice Mail Service
“Settings” → “Call Settings” → “Voicemail & Diverts”
→ “Deactivate”
1. Select the desired option.
To Cancel the Diverts and Voice Mail Service
Once you have changed the diverts settings, you can cancel
them all with this service.
“Settings” → “Call Settings” → “Voicemail & Diverts”
→ “Cancel All”
Call Waiting
Note
• This service may not be available on all mobile phone
networks. Contact your network operator for more
information.
If you wish to be able to receive another incoming call while you
have a call in progress, you must activate the Call Waiting
service.
“Settings” → “Call Settings” → “Call Waiting”
1. Select “On”, “Off” or “Status”.
Settings
105
Restrict Calls
This function lets you place restrictions on incoming and
outgoing calls. To activate this option you will need the
specified password, which is available from your service
provider.
“Settings” → “Call Settings” → “Restrict Calls”
1. Select from one of the following options:
“Outgoing Calls”:
Restricts outgoing calls.
“Fixed Dialling No.”:
Restricts calls for fixed dialling
numbers in the Phonebook.
“Incoming Calls”:
Restricts incoming calls.
“Rejected Numbers”:
You can register for dialling
numbers to be restricted.
“Withheld Call”:
Restricts withheld calls.
“Change N/W Password”: Changes the network password.
2. Select one of the following options:
(For “Outgoing Calls”)
“Bar All Outgoing Calls”: Restricts all outgoing calls
except emergency calls.
“Bar International Calls”: Restricts all outgoing
international calls.
“Only Local & Home”:
Restricts all outgoing
international calls except to your
home country.
106
Settings
(For “Incoming Calls”)
“Bar All Incoming Calls”: Restricts all incoming calls.
“Bar if Abroad”:
Restricts all incoming calls when
you are outside of the coverage
from your registered network
operator.
3. Select one of the following options:
(For “Outgoing Calls” and “Incoming Calls”)
“All Services”:
Restricts all services.
“Voice Calls”:
Restricts all voice calls.
“Video Callings”:
Restricts all video callings.
“Fax”:
Restricts all fax calls.
“Messages”:
Restricts all messages.
4. Select “On”, “Off” or “Status”.
5. Enter the network password.
To Cancel Settings
“Settings” → “Call Settings” → “Restrict Calls”
1. Select “Outgoing Calls” or “Incoming Calls”.
2. Select “Cancel All”.
3. Enter the network password.
Fixed Dialling No.
When the Fixed Dialling No. is enabled, you can only call
pre-registered numbers.
To Enable Fixed Dialling No.
“Settings” → “Call Settings” → “Restrict Calls” →
“Fixed Dialling No.” → “Switch On/Off”
1. Select “On” to enable this function.
To Add a New Name
“Settings” → “Call Settings” → “Restrict Calls” →
“Fixed Dialling No.” → “Edit Dial List”
1. Highlight the blank entry, press [Options], then select
“Add New Dial”.
2. Enter your PIN2 code.
3. Add a name and a phone number.
For details on adding a name and a phone number, see
“Add New” on page 42.
4. Press [Save].
Rejecting an Incoming Call
You can register phone numbers you do not wish to answer.
To Reject the Registered Number
“Settings” → “Call Settings” → “Restrict Calls” →
“Rejected Numbers” → “Switch On/Off”
1. Select “On” or “Off”.
To Register the Rejected Number
“Settings” → “Call Settings” → “Restrict Calls” →
“Rejected Numbers” → “Set Rejecting Number”
1. Select a blank field.
2. Enter the desired number.
Changing the Network Password
“Settings” → “Call Settings” → “Restrict Calls” →
“Change N/W Password”
1. Enter the old network password.
2. Enter a new network password.
3. Enter the new network password again.
If you enter the incorrect password, you are asked to enter
the password again.
4. Press
.
Settings
107
Minute Minder
Minute Minder function informs you of your talk time by
sounding a tone after every minute.
“Settings” → “Call Settings” → “Minute Minder”
1. Select “On” or “Off”.
Turning On or Off the Speaker
“Settings” → “Video Calling Settings” →
“Loudspeaker”
1. Select “On” to turn on the loud speaker on the back of
the phone, or select “Off” to turn it off.
Displaying Call Timer
“Settings” → “Call Settings” → “Display Call Timer”
1. Select “On” or “Off”.
Selecting the Picture Quality
Select the desired data format for your environment.
“Settings” → “Video Calling Settings” → “Incoming
Picture Quality”
“Settings” → “Video Calling Settings” → “Outgoing
Picture Quality”
1. Select “Normal”, “Quality Prior” or “Frame Rate Prior”.
Select “Frame Rate Prior” to perform faster
communication.
Displaying Call Costs
“Settings” → “Call Settings” → “Display Call Cost”
1. Select “On” or “Off”.
Auto Redial
“Settings” → “Call Settings” → “Auto Redial”
1. Select “On” or “Off”.
Video Calling Settings (M 9-7)
Set various types of functions and services for video callings.
Selecting an Image for the Alternative Image
You can select your image to be sent through the internal
camera from the saved picture files.
108
Settings
Backlight
With this setting On, the phone’s backlight is on when making
a video calling.
“Settings” → “Video Calling Settings” → “Backlight”
1. Select “Always On”, “Always Off” or “As Normal
Setting”.
The “As Normal Setting” option depends on the backlight
setting of the main display (p. 100).
Mute
You can mute the microphone while making a video calling.
“Settings” → “Video Calling Settings” → “Mute
Microphone”
1. Select “Off” to cancel the mute.
Assigning Hold Guidance Picture
You can display an image saved in the phone on your main
display while you are putting a call on hold.
“Settings” → “Video Calling Settings” → “Hold
Guidance Pict”
1. Select “Preset Picture” or “Picture Gallery”.
2. Select the desired picture.
Security (M 9-8)
Enabling/Disabling the PIN Code
If the PIN code is enabled you are asked to enter the PIN code
each time the phone is switched on. Your PIN code is registered
on the SIM/USIM card and you should have been made aware
of the code when you purchased the SIM/USIM card. Contact
your service provider for further details.
“Settings” → “Security Settings” → “PIN Entry” →
“Switch On/Off”
1. Select “On” to enable the PIN code or “Off” to disable.
2. Enter your PIN code.
Note
• If you enter the wrong PIN code three times in step 2, the
SIM/USIM card will lock. To remove the lock, contact your
service provider or SIM/USIM card vendor.
Settings
109
To Change the PIN Code
This allows you to change the PIN code registered on the SIM/
USIM card. Before you change the PIN code, select “On” in step
1 in “Enabling/Disabling the PIN Code” on page 109.
“Settings” → “Security Settings” → “PIN Entry” →
“Change PIN”
1. Enter the existing PIN code.
2. Enter a new PIN code.
3. Enter the new PIN code again.
Changing the PIN2 Code
The PIN2 code is used to protect certain functions in the phone
such as Fixed Dialling No. and call cost limits. The following
shows you how to change the PIN2 code.
“Settings” → “Security Settings” → “Change PIN2”
1. Enter the existing PIN2 code.
2. Enter a new PIN2 code.
3. Enter the new PIN2 code again.
Handset Lock
The Handset Lock is an additional security feature which
prevents unauthorised use of the phone or certain features.
“Settings” → “Security Settings” → “Handset Lock”
1. Select “On” or “Off”.
110
Settings
2. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code”.
To Change the Handset Code
Before you change the handset code, select “On” in step 1 in
“Handset Lock”.
“Settings” → “Security Settings” → “Change Handset
Code”
1. Enter the old handset code.
2. Enter a new handset code.
3. Enter the new handset code again.
Function Lock
By setting this option on, all the functions of your phone will be
locked until the correct handset code is entered.
“Settings” → “Security” → “Function Lock”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code”.
To Turn Off the Function Lock
Enter your handset code in standby to turn the Function Lock
off.
Master Reset (M 9-10)
Showing Secret Data
By setting this option on, the hidden data can be displayed.
“Settings” → “Security Settings” → “Show Secret
Data”
1. Select “On” to display or “Off” to hide.
Resetting Some of the Settings
“Settings” → “Master Reset” → “Reset Settings”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
Card Settings (M 9-9)
Formatting Memory Card
“Settings” → “Card Settings” → “Format Card”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
2. Press [Yes] to start formatting.
You can reset some of the settings or all the settings from M1
to M12.
Resetting All Settings from M1 to M12
“Settings” → “Master Reset” → “Reset All”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
Settings
111
Call Log (M 11)
The phone will record the last 10 missed calls, received calls
and dialled numbers.
Viewing Call Log
“Call Log”
1. Select “All Calls”, “Dialled Numbers”, “Missed Calls” or
“Received Calls”.
The selected call log list is displayed.
To switch logs, press c or d.
2. Select the phone number you wish to view.
If you wish to dial the number, press D.
Tip
• You can also confirm call logs by pressing D in standby.
Sending Messages
1. In the call log list, highlight the call log you wish to send
a message to.
2. Press [Options] and select “Create Message”.
For details on creating a message, see “Creating a New
Message” on page 54.
Deleting a Call Log
1. In the call log list, press [Options] and select “Delete”.
112
Call Log
Call Timers (M 11-5)
This function lets you check the duration of your calls.
Checking the Duration of the Last Call and All Calls
“Call Log” → “Call Timers”
1. Select “Received Calls” or “Dialled Calls”.
The duration of the last call and all calls is displayed.
Resetting Call Timers
“Call Log” → “Call Timers” → “Clear Timers”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
Data Counter (M 11-6)
You can confirm the number of bytes used in the 3G (UMTS)
transmission.
“Call Log” → “Data Counter”
1. Select “Last Data” or “All Data”.
Resetting All Data Counter
“Call Log” → “Data Counter” → “Clear Counter”
Connectivity (M 12)
By configuring the settings in this menu, you can connect to
Bluetooth wireless technology or infrared enabled phones via
these connections, as well as a PC via Bluetooth wireless
technology or infrared connections.
Bluetooth (M 12-1)
For using the Bluetooth wireless function, you need to search
for other Bluetooth wireless technology enabled devices to
establish contact with your phone. Keep your phone within a
distance of 10 metres from the devices before searching.
Using the Bluetooth Wireless Function
To Turn On or Off
“Connectivity” → “Bluetooth” → “Switch On/Off”
1. Select “On” or “Off”.
The Bluetooth wireless setting is activated, and “ ” is
displayed.
To Show or Hide Your Phone
“Connectivity” → “Bluetooth” → “Visibility”
1. Select the desired visibility settings.
“Show My Phone”:
Allows other devices to
recognise your phone.
“Hide My Phone”:
Hides your phone from other
devices.
To Search for Devices to be Paired
“Connectivity” → “Bluetooth” → “Search for Devices”
The phone starts searching for devices within 10 metres. A
maximum of 16 devices can be searched for and listed on the
displayed.
1. Select the desired device for pairing.
2. Enter the device passcode.
Note
• If the Bluetooth wireless function is off before searching, the
phone turns the Bluetooth wireless function on automatically
and starts searching.
• You can only select one device for pairing. To change the
paired device, see “To Activate the Paired Device” on
page 114.
Tip
• You can save battery power by turning the Bluetooth wireless
function off while it is not in use. Turn the Bluetooth wireless
function off in “To Turn On or Off” on this page or in “To Turn
Off Automatically” on page 115.
• During a call, you can divert voice calls to the paired
handsfree device. Press [Options], select “Transfer Audio”
and then “To Bluetooth” or “To Handset”. If you wish to
disconnect the paired device, select “Off”.
Connectivity
113
To Activate the Paired Device
Paired devices are listed by tabs for all devices and for
handsfree devices.
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press d to switch to the list for handsfree devices.
2. Select the desired device you wish to activate.
2. Enter your handset code.
To Rename or Delete the Paired Devices
“Connectivity” → “Bluetooth” → “Paired Devices”
1. Press c or d to switch between all devices and
handsfree devices.
2. Highlight the desired device.
Note
• If the handsfree device is connected, the confirmation
screen to deactivate the handsfree function is displayed.
Press [Yes] to deactivate.
3. Press [Options].
4. Select “Change Name” or “Delete”.
You can rename or delete by pressing
desired device.
after selecting
To Send All Data to Other Devices
You can send all the data for applications such as Phonebook,
Calendar, Tasks, etc. to selected devices.
“Connectivity” → “Bluetooth” → “Send All”
1. Select the desired device.
If a device is not specified, searching starts automatically.
114
Connectivity
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
3. Enter the device passcode for unpaired devices.
4. Select the desired data to send.
Bluetooth Wireless Settings
With this setting you can rename your phone, prevent other
phones from recognising your phone, turn the Bluetooth
wireless function off automatically to save battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown in other
devices when your phone is detected.
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Device Name”
1. Enter the new device name.
To Turn Off Automatically
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Bluetooth Timeout”
1. Select the desired time.
Your phone turns the function off automatically in the
specified time.
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the phone.
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Handsfree Setting”
1. Select “Private mode” or “Handsfree mode”.
“Private mode”:
For talking with the handset
“Handsfree mode”: For talking with the handsfree kit
To Turn the Authentication Request On or Off
You can request the sender or receiver of the OBEX data to
authenticate the passcode (exchanging the passcode) before
pairing devices.
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “Authentication”
1. Select “On” or “Off”.
Note
• No authentication is required for the paired devices.
• Even if you select “Off”, you may authenticate the passcode
when the sender requests it.
To See Your Phone Details
“Connectivity” → “Bluetooth” → “Bluetooth Settings”
→ “My Phone Details”
Infrared (M 12-2)
In order to use the infrared function, you need to search for
other infrared enabled devices to establish contact with your
phone. Keep your phone within a distance of 20 centimetres
from the devices before searching. The infrared setting will
return to off when no data is transmitted/received via infrared
communication.
Turning On or Off
“Connectivity” → “Infrared” → “Switch On/Off”
1. Select “On” or “Off”.
The infrared setting is activated, and “ ” is displayed.
Connectivity
115
Sending All Data
“Connectivity” → “Infrared” → “Send All”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
2. Select the desired data to send.
Adding a New Network
“Connectivity” → “Network Settings” → “Select
Network” → “Add New Network”
If there are no entries, press
and go to step 2.
If there is an entry, press
and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the authorisation code.
3.
4.
5.
6.
Network Settings (M 12-3)
Selecting a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
“Connectivity” → “Network Settings” → “Select
Network” → “Automatic”
Setting the Network Manually
“Connectivity” → “Network Settings” → “Select
Network” → “Manual”
1. Select the desired network.
116
Connectivity
Enter the network code (up to 3 digits).
Enter a new network name (up to 25 characters).
Select “Select network type”.
Select the desired network.
Editing the Preferred List
“Connectivity” → “Network Settings” → “Select
Network” → “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add
to end” to insert at the end or “Delete” to delete.
Showing the Network Information
“Connectivity” → “Network Settings” → “Network
Information”
Information about the operator name, package and services are
displayed.
Internet Settings (M 12-4)
Note
• In normal operations, you do not need to change the
settings.
• Internet settings have already been entered in your phone
depending on your network operator. You may have
restrictions on viewing, deleting, copying or modifying the
settings. Contact your network operator for details.
WAP Settings
“Connectivity” → “Internet Settings” → “WAP
Settings” → “Create New”
“Profile Name”:
WAP profile name (Unique
name)
“Proxy”:
Proxy setting for WAP
“Access Point”:
Access point for WAP (When
“Use Proxy” is Off)
“Use Proxy”:
Setting to connect by Proxy or
not
“Home”:
Home page URL (When “Use
Proxy” is Off)
Streaming Settings
“Connectivity” → “Internet Settings” → “Streaming
Settings” → “Create New”
“Profile Name”:
Profile name for streaming
(Unique name)
“Proxy Address”:
Proxy address
“Proxy Port Number”:
Port number (1-65535)
“Access Point”:
Access point
Proxy Settings
“Connectivity” → “Internet Settings” → “Proxy
Settings” → “Create New”
“Proxy Name”:
Proxy name (Unique name)
“Proxy Address”:
IP address
“Access Point”:
Access point
“Home”:
Home page URL
“Port Number”:
Port number (1-65535)
“Authentication Type”:
Authentication Type
(“HTTP-BASIC” or
“HTTP-DIGEST”)
“User Name”:
User name for authentication
“Password”:
Password for authentication
Connectivity
117
APN Settings
“Connectivity” → “Internet Settings” → “APN
Settings” → “Create New”
“Access Point Name”:
Access point name (Unique
name)
“APN”:
APN setting
“Authentication Type”:
Authentication type (“NONE”,
“PAP” or “CHAP”)
“User Name”:
User name for access point
“Password”:
Password for access point
“DNS”:
DNS (Domain Name System)
“Linger Time”:
Linger Time (1-99999 sec.)
Re-Provisioning Settings
“Connectivity” → “Internet Settings” →
“Re-Provisioning Settings” → “Execute Pending”
Clearing DNS Cache
“Connectivity” → “Internet Settings” → “Clear DNS
Cache”
118
Connectivity
To Activate the WAP/Streaming Profile
“Connectivity” → “Internet Settings”
1. Select “WAP Settings” or “Streaming Settings”.
2. Select the desired profile you wish to activate.
To Edit/Copy/Delete the WAP/Streaming Profile
“Connectivity” → “Internet Settings”
1. Select “WAP Settings” or “Streaming Settings”.
2. Highlight the desired profile.
3. Press [Options] and select the desired option.
“Edit”:
“Copy”:
“Delete”:
Modify the desired item
Enter the new file name
Press [Yes] to delete
Off Line Mode (M 12-5)
When the Off Line Mode is set to “On”, the phone cuts off the
network connections and stops searching for available
networks to connect. With this mode, you can play games or
music even when you fly.
“Connectivity” → “Off Line Mode”
1. Select “On” or “Off”.
Backup/Restore (M 12-6)
With a memory card inserted in your phone, you can make
backup files of Bookmarks, Text, Phonebook, Calendar and
Tasks in the handset memory to the memory card. You can also
restore the backup data from the memory card.
Making a Backup File on the Memory Card
“Connectivity” → “Backup/Restore” → “Backup”
1. Enter your handset code.
The default handset code is “9999”. For details on
changing the handset code, see “To Change the Handset
Code” on page 110.
2. Press [OK].
3. Select the desired item to backup.
To Backup All Files
“Connectivity” → “Backup/Restore” → “Backup”
1. Enter your handset code.
2. Press [OK].
3. Select “Select All”.
Restoring a Backup File
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
2. Press [OK].
3. Select the desired item.
4. Select the desired file to restore.
A confirmation message indicates deletion from the
memory card is displayed on the screen.
5. Press [Yes].
To Restore All Files
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
2. Press [OK].
3. Select “Select All”.
A confirmation message indicating deletion from the
memory card is displayed on the screen.
4. Press [Yes].
To Delete a Backup File
“Connectivity” → “Backup/Restore” → “Restore”
1. Enter your handset code.
2. Press [OK].
3. Select the desired item.
4. Highlight the desired file.
5. Press [Options] and select “Delete”.
A confirmation message to delete the selected file is
displayed on the screen.
6. Press [Yes].
Connectivity
119
Connecting SX313 to Your PC
You can use the following functions by connecting the SX313
to your PC using an infrared port, USB port* or Bluetooth
wireless technology port:
• 3G/GSM GPRS modem
• Handset Manager for SX313
* Requires an optional USB data cable XN-1DC30 for USB port
connection.
System Requirements
Operating System:
Windows® 98*, Windows® Me,
Windows® 2000**, Windows® XP***
* Windows® 98 Second Edition, Windows® 98 Service
Pack 1 with Internet Explorer 5.01 or later
** Service Pack 4
*** Service Pack 1a
Supported Software:
Microsoft® Outlook/Outlook Express
Interface:
Infrared port, USB port or Bluetooth wireless port
CD-ROM drive
120
Connecting SX313 to Your PC
3G/GSM GPRS Modem
You can use SX313 as a 3G/GSM GPRS modem to access the
Internet from your PC. Connect your phone to your PC via
Bluetooth wireless technology or USB interface. Software
installation on your PC is required. For details, see “Software
Installation” on page 121.
Modem via the USB Cable
To use the modem function using a USB cable, use the cable
mentioned above and see the instructions accompanying the
cable.
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless technology
interface, see “Using the Bluetooth Wireless Function” on
page 113 and turn the modem function on.
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible while communicating
with the Handset Manager via Bluetooth wireless technology,
infrared or USB interface.
• Your phone exhausts the battery when connected to a PC,
even when not communicating.
Handset Manager
You can transmit the following items between your phone and
your PC, and can use Phonebook entries on your PC:
• Gallery files (pictures/sounds/video clips/Other Documents
data)
• Phonebook entries
• Schedule entries
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Software Installation
1. Insert the CD-ROM (purchase separately) into your
CD-ROM drive.
The SX313 CD-ROM screen is displayed.
If the SX313 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Press the desired button.
The installation starts.
3. Follow the on-screen instructions to complete
installation.
Note
• The phone may not recognise the USB data cable if it is
connected while an application (Camera, Gallery, etc.) is
running. Connect the USB data cable in standby.
Connecting SX313 to Your PC
121
Infrared communication
• Infrared ports need to be aligned with each other.
Infrared port
• Infrared ports need to be placed within 20 cm of each other
and within a 30° angle.
3G/GSM GPRS modem
• It is not recommended that you make or answer calls when
you are using SX313 as a 3G/GSM GPRS modem. The
operation may be interrupted.
Handset Manager
• Some large files may not be able to be transmitted from the
PC to the phone.
122
Connecting SX313 to Your PC
• Applications (Camera, Gallery, etc.) do not run when the
phone is connected to the PC via Bluetooth wireless
technology interface, infrared port or USB data cable.
Troubleshooting
Problem
The phone does not turn on.
PIN code or PIN2 code is
rejected.
The SIM/USIM card
becomes locked.
The display is difficult to
read.
Solution
• Make sure the battery is properly
inserted and charged.
• Make sure you have entered the
correct code (4 to 8 digits).
• Your SIM/USIM card/protected
functions will become locked
after three unsuccessful
attempts.
• Contact your SIM/USIM provider if
you do not have the correct PIN
code.
• Enter the PUK code (8 digits)
provided by your service provider
(if supported).
• If the attempt is successful, enter
the new PIN code and confirm
your phone is operational again.
Otherwise contact your dealer.
• Adjust the backlight brightness
for the display.
Problem
Solution
• Check the radio signal strength
indicator as you may be outside
the service area.
Phone functions do not work • Check to see if any error message is
after the phone is turned on.
displayed when you turn your
phone on. If so, contact your dealer.
• Make sure the SIM/USIM card is
correctly inserted.
• If the message “SIM card error” is
displayed when the phone is
switched on, you cannot use your
SIM/USIM card or the SIM/USIM
card is damaged. Contact your
dealer or network service provider.
• Check your call barring, fixed
dialling setting, remaining battery
Calls cannot be made or
and call forwarding settings.
received.
• Check if your phone is currently
performing data communication
using Infrared (IrDA), Bluetooth
wireless technology interface or a
USB data cable.
• Check the remaining balance if
you are using a pre-paid SIM/
USIM card.
Troubleshooting
123
Problem
Call quality is poor.
Cannot access network
service.
Cannot send or receive text
message.
Cannot connect to
Multimedia Messaging
Service provider.
Limited memory available.
124
Troubleshooting
Solution
• Your current location may not
provide good call quality (i.e., in a
car or train). Move to a location
where radio signal strength is
stronger.
• Check where your account has
been registered and where the
service is available.
• Make sure you are correctly
subscribed for the Short Message
Service, that the network
supports this service, and that
the centre number is set up
correctly. If not, contact your
network service provider.
• MMS settings and configuration
may be missing or incorrect or
the network does not support it.
Check your service provider’s
access point number.
Contact your service provider to
confirm the correct settings.
• Delete any unnecessary data.
Problem
Call is terminated
unexpectedly.
No entries are displayed in
the Phonebook.
Fax transmission failure
Cannot receive OBEX data.
Solution
• Magnetised objects such as
health necklaces placed near the
phone may terminate the call.
Keep your phone away from such
objects.
• Confirm that the Source setting
(Handset or SIM/USIM) is made
correctly.
• Before transmitting fax data,
configure your fax software to
use the software flow control.
• Use of the optional data cable is
recommended for transmitting
fax data.
• The OBEX data can only be
received only in standby. The
message “Please return to
stand-by.” is displayed.
Safety Precautions and Conditions of
Use
Your phone conforms to international regulations insofar as it is
used under normal conditions and in accordance with the
following instructions.
Conditions of Use
Electromagnetic waves
• Do not switch on your phone aboard an aircraft (as your
phone may interfere with the aircraft’s electronic systems).
Current legislation forbids this use and legal action can be
taken against the user.
• Do not switch on your phone in a hospital, except in
designated areas.
• Use of your phone’s function may affect the performance of
medical electronic units (pacemakers, hearing aids, insulin
pumps, etc.). When the phone function is on, do not bring it
near medical equipment or into areas in which medical
equipment is being used. If you have a hearing aid or a
pacemaker, only use the phone on the opposite side of your
body from where it is located. The phone should be kept at
least 6 inches (15.24 cm) from a pacemaker ANYTIME the
phone is switched on.
• Do not switch on your phone near gas or flammable
substances.
• Observe the rules concerning the use of mobile phones at
gasoline stations, chemical plants and at all sites where a
risk of explosion exists.
Caring for your phone
• Do not allow children to use your phone without supervision.
• Do not open or attempt to repair your phone yourself. The
product can only be repaired by authorised service
personnel.
• Do not drop your phone or subject it to severe impacts.
Bending the body and pushing the display or keys with
extreme force could damage the phone.
• Do not use solvents to clean your phone. Use only a soft, dry
cloth.
• Do not carry your phone in your back pocket as it could break
when you sit down. The display is made of glass and is
particularly fragile.
• Avoid touching the external connector on the underside of
the phone, since the delicate components within can be
damaged by static electricity.
Safety Precautions and Conditions of Use
125
Battery
• Use your phone only with batteries, chargers and
accessories recommended by the manufacturer. The
manufacturer disclaims any liability for damage caused by
the use of other chargers, batteries or accessories.
• Network configuration and phone usage will affect
talk-time and standby time.
Using the games or camera will hasten battery consumption.
• When the battery charging alert is displayed on the
screen, charge the battery as soon as possible. If you
continue using your phone ignoring the alert, the phone may
cease to function, and all data and settings you have stored
may be lost at any moment.
• Before removing the battery from the phone, make sure the
phone is switched off.
• Replace and charge the new battery as soon as possible
after removing the old one.
• Do not touch the battery terminals. Batteries can cause
damage, injury or burns if a conductive material touches
exposed terminals. When the battery is detached from the
phone, use a cover made of non-conductive material for
keeping and carrying the battery safely.
• Recommended temperature for using and storing batteries is
approximately 20°C.
126
Safety Precautions and Conditions of Use
• The batteries’ performance is limited in low temperatures,
particularly below 0°C and the phone may not work
temporarily regardless of the amount of remaining battery
power.
• Exposing the phone to extreme temperatures will shorten
battery life.
• The battery can be charged and discharged hundreds of
times but it will eventually wear out. When the operating time
(talk-time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE,
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS
See “Battery Disposal” on page 12.
Aerial Care
• Do not cover the top of the phone (p. 8, No. 19) with your
hand when in use as this may interfere with the performance
of the built-in aerial. Call quality may deteriorate leading to
shortened talk-time and standby time because the mobile
phone has to operate on a higher power level than is
necessary.
• Use only the aerial supplied or one approved by Sharp for
your mobile phone. Using unauthorised or modified aerials
may damage the mobile phone. Moreover, since the mobile
phone may violate the appropriate regulations, it may lose
performance or exceed the limitation of SAR levels.
• To avoid impaired performance, do not damage the aerial of
the mobile phone.
• While talking directly to the microphone, please hold the
mobile phone so that the aerial is upwards over your
shoulder.
• To avoid interfering with blasting operations, please turn off
the mobile phone in a blasting area or in a place where a
“turn off two-way radio” sign is posted.
Camera Operation
• Learn picture quality, file formats, etc. beforehand.
The taken pictures can be saved in JPEG format.
• Be careful not to move your hand while taking pictures.
If the phone moves while taking a picture, the picture can
become blurred. When taking a picture, hold the phone
firmly to prevent it from moving, or use the delay timer.
• Clean the lens cover before taking a picture.
Fingerprints, oils, etc. on the lens cover hinder clear
focusing. Wipe them off with a soft cloth before taking a
picture.
Others
• As with any electronic storage unit, data may be lost or
corrupted under various circumstances.
• Before connecting the phone with a PC or a peripheral unit,
read the operation manual for the other unit carefully.
• If the phone’s battery has been removed for some time, or
the phone has been reset, the unit’s clock and calendar may
be reinitialised. The date and time should be updated in this
case.
Safety Precautions and Conditions of Use
127
Environment
• Keep your phone away from extreme heat. Do not leave it on
the dashboard of a car or near a heater. Do not leave it in any
place that is extremely damp or dusty.
• Since this product is not waterproof, do not use it or store it
where fluids such as water can splash onto it. Raindrops,
water spray, juice, coffee, steam, perspiration, etc. will also
cause malfunctions.
Precautions Concerning Vehicle Use
• It is the user’s responsibility to check the local laws
governing the use of a mobile phone in vehicles. Pay full
attention to driving. Pull off to the side of the road, park the
car, and switch off the engine before making or answering a
call.
• Use of your phone’s function may interfere with the vehicle’s
electronic systems, such as the ABS anti-lock brakes or the
air-bag. To ensure no such problem occurs, please check
with your dealer or car manufacturer before connecting your
phone.
• Only allow qualified service maintenance personnel to install
the vehicle accessories.
128
Safety Precautions and Conditions of Use
The manufacturer disclaims any liability for damage which may
result as a consequence of improper use or use contrary to the
instructions contained herein.
SAR
Your Sharp mobile phone has been designed, manufactured
and tested so as not to exceed the limits for exposure to
electromagnetic fields recommended by the Council of the
European Union. These limits are part of comprehensive
guidelines developed by independent scientific organisations.
The guidelines include a substantial safety margin designed to
assure the safety of the phone user and others and to take into
account variations in age and health, individual sensitivities and
environmental conditions. European standards provide for the
amount of radio frequency electromagnetic energy absorbed by
the body when using a mobile phone to be measured by
reference to the Specific Absorption Rate (SAR). The SAR limit
for the general public is currently 2 watts per kilogram
averaged over 10 grams of body tissue. Your Sharp mobile
phone SAR value is 0.626 watts per kilogram. This has been
tested to ensure that this limit is not exceeded even when the
phone is operating at its highest certified power. In use
however your Sharp mobile phone may operate at less than full
power because it is designed to use only sufficient power to
communicate with the network.
Precautions for Use in USA
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user’s
authority to operate the equipment.
Exposure to Radio Waves
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits
for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These
limits are part of comprehensive guidelines and establish
permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by
independent scientific organizations through periodic and
thorough evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the safety of all
persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a
unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating positions specified by
the FCC with the phone transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual SAR
level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to
a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must
be tested and certified to the FCC that it does not exceed the
limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this model
phone when tested for use at the ear is 0.820 W/kg and when
worn on the body, as described in this user guide, is 0.801 W/
kg. Body-worn Operation; This device was tested for typical
body-worn operations with the back of the phone kept 1.5 cm
from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 1.5 cm
separation distance between the user’s body and the back of
the phone. The use of belt-clips, holsters and similar
accessories should not contain metallic components in its
assembly.
The use of accessories that do not satisfy these requirements
may not comply with FCC RF exposure requirements, and
should be avoided. While there may be differences between the
SAR levels of various phones and at various positions, they all
meet the government requirement for safe exposure.
Safety Precautions and Conditions of Use
129
The FCC has granted an Equipment Authorization for this model
phone with all reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR information on this
model phone is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/fccid after
searching on FCC ID APYHRO00040.
Additional information on Specific Absorption Rates (SAR) can
be found on the Cellular Telecommunications & Internet
Association (CTIA) web-site at http://www.phonefacts.net.
* In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged
over one gram of tissue. The standard incorporates a
substantial margin of safety to give additional protection for
the public and to account for any variations in
measurements.
130
Safety Precautions and Conditions of Use
Out of Warranty List
This limited warranty shall not apply in respect of the following:
(i) Any deterioration due to normal wear and tear including all
plastic surfaces and all other externally exposed parts that
are scratched or damaged due to normal customer use.
(ii) Defects caused by the Product being subjected to any of
the following: use in contradiction with the user guide,
rough handling, exposure to moisture, dampness or
extreme thermal or environmental conditions or rapid
changes in such conditions, corrosion, oxidation,
unauthorised modifications or connections, unauthorised
opening or repair, repair by use of unauthorised spare
parts, misuse, improper installation, accident, forces of
nature, spillage of food or liquid, influence from chemical
products or other acts beyond Sharp’s reasonable control
(including but not limited to lifetime, and breakage of or
damage to antennae) unless the defect was caused
directly by defects in materials or workmanship.
(iii) Products in respect of which the product serial number or
the IMEI number has been removed, erased, defaced,
altered or made illegible.
(iv) Defects caused by the fact that the Product was used with
or connected to a products or an accessory not
manufactured or supplied by Sharp or was used other
than for its intended use.
(v) Defects caused by a defective function of the cellular
network.
(vi) Defects caused by the fact that the battery was shortcircuited or seals of the battery enclosure or cells were
broken or show evidence of tampering or the battery was
used in equipment other than for which it has been
specified.
(vii) Defects caused by the need to upgrade Products software
due to changes in cellular network parameters.
(viii) Products operated outside published maximum ratings.
(ix) Products rented on a monthly basis.
Charger Plug:
Do not use the AC Charger if the plug does not fit the socket.
Out of Warranty List
131
Index
Symbols
#/Silent Key 10
* /Shift Key 9
A
Alarms 87
Resetting 88
Setting 87
Area Info 60
Enabling/Disabling 60
B
Battery
Charging 13
Disposal 12
Inserting 11
Removing 12
Battery Cover 10
Bluetooth 113
Bluetooth Wireless Function 113
Bluetooth Wireless Settings 114
Browser 63
Built-in Aerial 10
C
Calculator 88
132
Index
Calendar 84
Creating 84
Deleting 86
Editing 86
Receiving 87
Sending 86
Viewing a Schedule Entry 85
Viewing the Memory Status 87
Call Log 112
Deleting 112
Sending 112
Viewing 112
Call Manager 41
Assigning a Ringtone or a Ring Video
Clip File 44
Changing the List 42
Copying 43
Creating 42
Deleting 44
Dialling 43
Editing 44
Finding 42
Manage Group 45
Memory Status 46
Message Groups 45
Receiving 47
Saving 42
Sending a Voice Clip Message or
Video Clip Message 47
Sending an Entry 47
Sorting the List Order 42
Speed Dial List 46
Viewing My Card 43
Call Settings 104
Auto Redial 108
Call Waiting 105
Changing the Network Password
107
Displaying Call Costs 108
Displaying Call Timer 108
Fixed Dialling No. 107
Minute Minder 108
Rejecting 107
Restrict Calls 106
Voicemail & Diverts 104
Call Timers 112
Checking the Duration 112
Resetting 112
Camera (photo/video)
Adjusting the Exposure 49
Anti-flicker 50
Auto Save 50
Continuous Shoot 52
Recording Video Clips 49
Recording with Sound 53
Saving 50
Selecting a Frame 52
Selecting the Picture or Video Quality
50
Selecting the Picture Size 51
Selecting the Recording Time 53
Selecting the Shutter Sound 53
Shortcut 51
Switching between the Photo and
Video Camera Modes 50
Taking Pictures 48
Using the Full Screen 52
Using the Timer 50
Using the Zoom Function 49
Camera Key 10
Card Settings 111
Formatting Memory Card 111
Cell Broadcasts 59
Enabling/Disabling 59
Reading 59
Setting Languages 59
Subscribing 59
Centre Key 9, 17
Characters 31
Changing the Input Language 32
Changing the Input Method 32
Chinese User Dictionary 37
Copying, Cutting and Pasting Text 40
Insert Phonebook Entries 40
Using Templates 40
Chinese User Dictionary 37
Creating 37
Deleting 37
Editing 37
Using 38
Clear/Back Key 10
Conditions of Use 125
Connectivity 113
Backup/Restore 119
Bluetooth 113
Infrared 115
Internet Settings 117
Network Settings 116
Off Line Mode 118
Countdown Timer 92
Editing 93
D
Data Counter 112
Resetting 112
Display
Adjusting the Brightness 100
Assigning the Pictures 99
Backlight 100
Setting from Picture Gallery 99
Setting the Display Saving 101
Setting the External Display 101
Setting the Greeting Message 100
Wallpaper 99
Display Indicators 17
E
Earpiece 9
Earpiece Volume 23
Emergency Calls 21
End/Power Key 10
Expenses Memo 93
Editing 93
Recording 93
Viewing Totals 93
External Camera 10
External Connector 10
External Display 10
F
Functions
Navigating 20
Index
133
G
Gallery 72
Common Option Menus 75
Memory Status 78
Other Documents 75
Picture Gallery 72
Sound Gallery 74
Text Templates 78
Video Gallery 73
GSX™ & Java™ Gallery 79
Deleting 81
Downloading 79
Executing 79
Setting a Screensaver Application 79
Setting Network Access 81
Setting Security Level 80
Viewing Application Information 81
H
Handset Code 110
Handset Lock 110
I
Incall Menu (Video Calling) 27
Changing the Image of Yourself 27
Muting 27
Switching Images 27
Turning the Speaker On and Off 27
134
Index
Video Calling Settings 28
Incall Menu (Voice Call) 23
Accessing SMS/MMS Menu 24
Call Waiting 24
Conference Call 24
Earpiece Volume 23
Muting 25
Putting a Call on Hold 23
Turning the Speaker On and Off 23
Infrared Port 10
International Calls 21
J
Java™ Information 83
Java™ Settings 82
Application Volume 82
Backlight 82
Calls & Alarms 83
Vibration 82
K
Keypad 10
Keypad Lock 16
L
Language Setting 103
Left Soft Key 9
M
Main Display 9
Master Reset 111
Media Player 67
Music Player 69
TV & Video 67
Memory Card
Inserting 14
Removing 15
Memory Card Slot Cover 10
Menu 29
Messages (MMS/SMS/Email)
Calling the Phone Number 58
Creating 54
Downloading 58
Email Settings 62
Forwarding 58
General Settings 60
Locking or Unlocking 59
MMS Settings 62
Reading 57
Replying 58
Sending 57
Sending Options 56
SMS Settings 61
Sorting 59
Storing the Phone Number 57
Microphone 9
Music Key 10
Music Player 69
Adding a File to the Playlist 70
Adding a New Playlist 71
Downloading 71
Finding 70
Playing Back 69
N
Navigation Keys 9
O
Organiser 84
Alarms 87
Calculator 88
Calendar 84
Countdown Timer 92
Expenses Memo 93
Phone Help 93
Stopwatch 90
Tasks 90
Voice Recorder 89
World Clock 92
P
PC Connection 120
3G/GSM GPRS Modem 120
Handset Manager 121
Software Installation 121
System Requirements 120
Picture Gallery 72
Adjusting the Size 73
Downloading 73
Editing 73
Saving 72
Switching the Memory Source 72
Using Images as Wallpaper 72
Viewing 72
Power On and Off 16
Profiles 95
Activating 95
Any Key Answer 98
Assigning a Ring Video Clip File 96
Assigning a Ringtone 96
Event Light 98
Keypad Tones 97
Message Notification 97
Resetting 95
Ringer Volume 95
Status Light 98
Vibration 97
R
Redialling 22
Right Soft Key 10
S
Safety Precautions 125
Security 109
Changing the PIN2 Code 110
Enabling/Disabling the PIN Code 109
Function Lock 110
Handset Lock 110
Showing Secret Data 111
Send/Redial Key 9
Set Java™ Wallpaper 81
Setting Applications 81
Switching On or Off 81
Side Keys 10
SIM Application 94
SIM/USIM Card
Inserting 11
Removing 12
Small Light 10
Sound Gallery 74
Playing Back 74
Switching the Memory Source 74
Using the Sound Files as a Ringtone
74
Speaker 10
Speed Dialling 22
Stereo Handsfree
Connecting 15
Index
135
Stereo Handsfree Connector 10
Stopwatch 90
Sub Camera (Internal Camera) 9
T
T9 Text Input
Using PinYin mode 35
Using Stroke mode 35
Using T9 English Mode 33
Tasks
Creating 90
Deleting 92
Sending 91
Viewing the Memory Status 92
Time & Date 102
Customising the Time Zone 102
Displaying Date & Time 103
Selecting the Date Format 103
Selecting the Time Format 103
Setting the Calendar Format 103
Setting the Daylight Saving 102
Setting the Time Zone 102
Troubleshooting 123
TV & Video 67
Adding a File to the Playlist 67
Adding a New Playlist 68
Downloading 69
Editing 68
136
Index
Finding 67
Playing Back 67
SD Video 69
Settings 68
V
Video Calling 26
Answering 26
Incall Menu 27
Making 26
Video Calling Key 9
Video Calling Settings 108
Assigning Hold Guidance Picture 109
Backlight 109
Muting 109
Selecting an Image 108
Selecting Picture Quality 108
Turning On or Off the Speakers 108
Video Gallery 73
Downloading 74
Playing Back 73
Using a Video Clip as a Ring Video 74
Voice Call 21
Answering 22
Incall Menu 23
Making 21
Redialling 22
Speed Dialling 22
Voice Mail Key 9
Voice Recorder 89
Recording 89
Saving 90
Selecting the Record Time 90
Sending 89
W
WAP Browser
Browser Options 65
Editing Bookmarks 64
Main Menu 63
Navigating a WAP Page 64
Settings 66
World Clock 92
Setting the Daylight Saving 92
Setting the Time Zone 92