advertisement
FaxFinder
®
User Guide
FAXFINDER® CLIENT USER GUIDE
FaxFinder ® Client User Guide
Models: FF240, FF440, FF840, FF240-IP FF130, FF230, FF430, and FF830
Part Number: S000523, Version 5.0.2
Copyright
This publication may not be reproduced, in whole or in part, without the specific and express prior written permission signed by an executive officer of
Multi-Tech Systems, Inc. All rights reserved. Copyright © 2013 by Multi-Tech Systems, Inc.
Multi-Tech Systems, Inc. makes no representations or warranties, whether express, implied or by estoppels, with respect to the content, information, material and recommendations herein and specifically disclaims any implied warranties of merchantability, fitness for any particular purpose and noninfringement.
Multi-Tech Systems, Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of
Multi-Tech Systems, Inc. to notify any person or organization of such revisions or changes.
Trademarks
FaxFinder, Multi-Tech, and the Multi-Tech logo are registered trademarks of Multi-Tech Systems, Inc. Windows is a registered trademark of Microsoft in the
U.S. and other countries. All other products and technologies are the trademarks or registered trademarks of their respective holders.
Patents
This device covered by the following patents: 5,673,268.
Legal Notices
The Multi-Tech products are not designed, manufactured or intended for use, and should not be used, or sold or re-sold for use, in connection with applications requiring fail-safe performance or in applications where the failure of the products would reasonably be expected to result in personal injury or death, significant property damage, or serious physical or environmental damage. Examples of such use include life support machines or other life preserving medical devices or systems, air traffic control or aircraft navigation or communications systems, control equipment for nuclear facilities, or missile, nuclear, biological or chemical weapons or other military applications (“Restricted Applications”). Use of the products in such Restricted
Applications is at the user’s sole risk and liability.
MULTI-TECH DOES NOT WARRANT THAT THE TRANSMISSION OF DATA BY A PRODUCT OVER A CELLULAR COMMUNICATIONS NETWORK WILL BE
UNINTERRUPTED, TIMELY, SECURE OR ERROR FREE, NOR DOES MULTI-TECH WARRANT ANY CONNECTION OR ACCESSIBILITY TO ANY CELLULAR
COMMUNICATIONS NETWORK. MULTI-TECH WILL HAVE NO LIABILITY FOR ANY LOSSES, DAMAGES, OBLIGATIONS, PENALTIES, DEFICIENCIES, LIABILITIES,
COSTS OR EXPENSES (INCLUDING WITHOUT LIMITATION REASONABLE ATTORNEYS FEES) RELATED TO TEMPORARY INABILITY TO ACCESS A CELLULAR
COMMUNICATIONS NETWORK USING THE PRODUCTS.
Contacting Multi-Tech
Knowledge Base
The Knowledge Base provides immediate access to support information and resolutions for all Multi-Tech products. Visit http://www.multitech.com/kb.go.
Support Portal
To create an account and submit a support case directly to our technical support team, visit: https://support.multitech.com.
Support
Business Hours: M-F, 8am to 5pm CT
Country
Europe, Middle East, Africa:
U.S., Canada, all others:
By Email [email protected]
By Phone
+(44) 118 959 7774
(800) 972-2439 or (763) 717-5863
Warranty
To read the warranty statement for your product, visit www.multitech.com/warranty.go. For other warranty options, visit www.multitech.com/es.go.
World Headquarters
Multi-Tech Systems, Inc.
2205 Woodale Drive, Mounds View, MN 55112
Phone: (800) 328-9717 or (763) 785-3500
Fax (763) 785-9874
2 FaxFinder ® User Guide
CONTENTS
Contents
FaxFinder ® User Guide 3
CONTENTS
4 FaxFinder ® User Guide
INTRODUCTION
Introduction
About FaxFinder Client
Use the FaxFinder Client to send faxes through the FaxFinder Fax Server. You can send faxes directly from your computer through the client or through applications such as Microsoft Word.
Multi-Tech provides three manuals for use with FaxFinder:
■ User Guide (this document) includes details on sending faxes and using the client software.
■ Administrator Guide provides details on installing, configuring, and managing FaxFinder.
■ Developer Guide provides information and examples for the FaxFinder Web Services API.
Note: How your administrator configures the FaxFinder Fax Server determines which fax methods are available to you.
Starting the Client
To start the client:
1.
Check the system tray to determine if the client is already running. The FaxFinder Client icon, , appears in the system tray if the client is running.
2.
If the FaxFinder icon is not in the system tray, go to Start and select FaxFinder Client.
Note: If the FaxFinder Client is not installed on your computer, refer to Installing Client Software or contact your administrator. To install the software, you need administrator rights for your computer. After installing the software, associate one or more FaxFinder units with the software on your computer.
3.
Double-click the FaxFinder Client icon.
Exiting the Client
You can minimize the client and leave it running the background. If you exit the client, you cannot send faxes from other applications by printing.
To exit the client:
■ Click Fax > Exit . FaxFinder prompts you to confirm the exit.
FaxFinder ® User Guide 5
6
SENDING FAXES
Sending Faxes
Sending a Fax with the Client
To send a fax using the FaxFinder Client:
1.
Click New Fax.
2.
To change fax servers, select a FaxFinder from the Fax Server drop-down list.
3.
Add fax recipients.
To fax to recipients not in a contact list: To select recipients from a contact list: a.
Click To. b.
Enter recipient details.
Note: To save recipient information, check Add to
Personal Contacts.
c.
Click OK.
OR a.
Start typing the recipient's name.
b.
Select name when it appears in list.
a.
Click Contacts. b.
Select a contact list from the dropdown list. To filter the list, start typing a name in the Filter field and click Apply. c.
Check each contact you want to fax to.
d.
Click OK.
Click the Remove icon to remove a recipient from the distribution list. This does not delete a contact from the system.
5.
Select a Cover Page from the drop down list. To see the selected cover page template, click View.
a.
Type a brief description in the Subject field. This appears as the cover page subject.
b.
Type a message in the Comments field. This appears as the cover page comments.
6.
Attach the document that you want to fax. To add a new document: a.
Click Browse.
b.
Select a file and click Open. Note that 36MB is the maximum file size for sending a fax through client software.
Note:
For Windows OS, FaxFinder supports .DOC, .DOCX, .DOT, .DOCM, .DOTX, .RFT, .XLS,
.XLST, .XLSX, .XLSM, .CSV, .XLSB, .PPT, .PPTX, .PPSX, .PPSM, .PPTM, .HTM, .HTML, .PDF,
.PS, .TXT, or .TIF file formats.
For Mac OS, FaxFinder supports TXT, .PDF, .TIF, .TIFF, and .PS.
c.
Repeat Steps a-b for each document you want to fax.
To attach recently used document:
FaxFinder ® User Guide
SENDING FAXES a.
Highlight a document in Recent Attachments.
b.
Click Add.
7.
To send the fax immediately, click Send. To schedule the fax, click Options.
a.
Uncheck Send Immediately and enter the specific Date and Time. For other options, refer to
Scheduling Options for details.
b.
Click OK to save settings and click Send to send the fax.
Fax Options
Option
Max Attempts
Fax Priority
Retry Interval
Description
Enter the maximum number of times you want FaxFinder to try to send the fax to a recipient.
When multiple faxes are scheduled for the same time, FaxFinder sends those with a high priority before those with a low priority. Options, from highest to lowest priority, are:
■ 1st Priority
■ High
■ Medium/High
■ Medium
■ Medium/Low
■ Low
Enter the number of seconds FaxFinder should wait between retry attempts when a fax does not complete.
Fax Receipt Select when you want a receipt sent to the email address in your user account. Options are:
■ Never
■ Always, which sends a receipt with every fax attempt
■ Failure, which sends a receipt only when a fax is not successful
Fax Attachment with If you want the fax receipt to include an attachment of the original fax, select the
Receipt attachment file format. Options are:
■ None
■ TIFF
Print Fax Receipt
Select Printer
Set the condition that will trigger the fax receipt to be printed. Options are the same as
Email Fax Receipt. Never is the default.
If you select Failure or Always as an Print Fax Receipt option, select which printer you want to use from the drop down list. None is the default.
Print with First Page Check this option if you want the fax receipt to print with the fax's first page.
Sending a Fax by Printing (Windows)
For Windows users, once the FaxFinder Fax Client is associated with a FaxFinder, you can use the Print function in other programs to send faxes.
FaxFinder ® User Guide 7
8
SENDING FAXES
To send a fax through another program:
1.
Create the document that you want to fax and save it.
2.
Select Print.
3.
Select Multi-Tech FaxFinder as your printer and click OK (or Print depending on the program). The
FaxFinder New Fax window opens. Refer to Sending a Fax with the Client for help using this window.
Using the Mac Print Plug-in to Send a Fax
Mac client software installation included a print plugin workflow that use OS X’s built-in PDF support. This plugin allows you to send documents to FaxFinder from applications that support printing, such as Preview, Pages, MS
Word, TextEdit, and LibreOffice.
To send a document to FaxFinder from an application:
1.
In the application, go to File > Print....
2.
Configure print options as though you are sending the document to a printer. Use the following settings:
■ Copies to 1.
■ Orientation to Portrait.
■ Pages per Sheet to 1. (Fax resolution is limited; sending multiple pages per sheet may result in unreadable faxes.)
FaxFinder ® User Guide
SENDING FAXES
3.
Open the PDF drop-down list in the lower left corner and select Send to Multi-Tech FaxFinder. The document is converted to a PDF and sent to the FaxFinder Client.
4.
In the FaxFinder Client, the document appears under Selected Attachments on the lower-right. You can add other attachments, if desired.
5.
Select recipient(s) in the To field, add an optional Cover Page and click Send.
FaxFinder ® User Guide 9
SENDING FAXES
10
Sending a Fax from Email (T.37)
You can send an email as a fax using the T.37 format in the To field in Microsoft Outlook. You will need the domain name of the FaxFinder unit and the recipient's fax number.
To send a fax by email:
FaxFinder ® User Guide
SENDING FAXES
1.
Enter the recipient's fax number in the To field in the following format: FAX=##########@FaxFinder
domain name. For example the image shows [email protected].
2.
Add your message and any attachments. Attachments must be in TIF, PDF, PS, or TXT format. The 36MB is the maximum file size for sending a fax through email. Text entered in the email message area appears in the comments section of the fax cover page.
3.
Click Send.
FaxFinder ® User Guide 11
SENDING FAXES
Sending a Fax from the Web Interface
To send a fax through a web browser using the FaxFinder Web Management Interface:
1.
Type the FaxFinder's hostname or IP address in the browser’s address bar and press Enter.
Note: Your browser may display security warnings. Click Yes to proceed in Internet Explorer. Click Proceed
Anyway to proceed in Chrome. Firefox may require you to add an exception for the FaxFinder’s IP address.
2.
Enter your Username and Password and click Login.
3.
Click Send Fax.
FaxFinder fills in Sender Information based on your user account. This information appears in sender fields on the cover page.
4.
To view or edit sender information, click Sender Information. Make desired changes.
5.
Select a contact list or recipient option from the Find Recipient list.
Personal Contacts
Personal Groups
Global Contacts
Lists contacts for the user’s account.
Lists contact groups for the user’s account.
Lists global contacts.
Global Groups
Enter Recipient Info
Lists global contact groups.
Select this option to fax to recipient who isn't in a contact list.
Enter Recipient Info and save a Select this option to fax to a recipient who isn't in the contact list
Personal Contact and save recipient information as a personal contact.
Note: If you have a large number of contacts, the recipient information may take a several minutes to load.
6.
Enter recipient information or select the contact or group from the Contact/Group list.
7.
Click Add Recipient.
8.
Repeat Steps 5-7 for each additional recipient.
9.
Select a cover page, if desired.
a.
Select Yes to Include a cover page with this fax.
b.
Select a Cover Page from the drop-down list.
c.
Enter a Subject and Comments.
10.
Click Browse and select the file you want fax. The file must be a TIF, PDF, PS, or TXT file. Use Add Another
Attachment to add other documents. Note that 48MB is the maximum file size for sending a fax through the web interface.
11.
Select any options for this fax. Refer to Fax Options for details.
12.
Click Send Fax. Leaving this screen before clicking Send Fax will clear all the data without sending the fax.
Send Fax by Web API
FaxFinder also allows users to create custom APIs to use for faxing. This option would be unique to your organization. Check with your administrator for help with this option.
Note: The maximum file size for sending a fax through an API is 36MB.
12 FaxFinder ® User Guide
MANAGING FAXES
Managing Faxes
Checking Fax Status
When you start the fax client, it lists the faxes sent, received, and scheduled for the default server.
Fax Status Tabs
Fax status is shown on one or three tabs depending on which FaxFinder software is on the server:
■ If the fax server uses software version 3.0 or newer, fax status is split across three tabs: Scheduled, Sent, and Received. Click Sent or Received to view these tabs.
Viewing a Fax Status Different Server
If you have multiple fax servers associated with your Fax Client, note that fax status is shown for one server at a time. To view faxes for a different server:
1.
Click View Servers.
2.
Click a server from the pop-up list.
Note: View Servers only appears if you have two or more FaxFinders associated with the Fax Client.
Fax Status
For outgoing faxes:
Fax Status Description
Fax sent or received successfully.
Fax pending, scheduled but not yet sent.
Fax failed or was aborted.
Preparing to send the fax.
Sending the fax.
Fax status tabs also show:
■ When the fax was scheduled, sent, or received.
■ Number of pages scheduled, sent, or received.
■ Fax subject, if provided, for scheduled or sent faxes.
■ Fax recipient
Fax Actions
You can take the following actions through the Fax Status page.
Actions Description
Abort the fax. Scheduled faxes only.
FaxFinder ® User Guide 13
MANAGING FAXES
Actions Description
Reschedule the fax. Applies to scheduled, sent, aborted, or failed faxes.
View fax details. Applies to scheduled, sent, aborted, or failed faxes.
View the fax. Applies to scheduled, sent, aborted, received, or failed faxes. If inbound archiving is enabled on the server, you can view received faxes also.
Save the fax. Received faxes only.
New Fax, opens Send Fax page. Print Captures only.
Rescheduling a Fax
To reschedule fax:
1.
Click the fax's Reschedule icon. By default, Send Immediately is selected.
2.
Make desired changes and click OK.
To reschedule a Print Capture fax:
1.
Click Print Captures.
2.
Click the fax's New Fax icon.
3.
Make the desired changes and click Send. For more information see Sending a Fax with the Client
Canceling a Fax
To cancel a scheduled fax:
■ Click the fax's Abort icon and click Yes to confirm.
Administrators can also delete outbound faxes through the Web Management Interface. Consult the
Administrator's Guide for more information.
Deleting Print Captures
Users can configure the client to delete the Print Capture listing after sending faxes or can manually delete them as follows:
1.
Click Print Captures.
2.
Click the fax’s Delete icon and click Yes to confirm.
Viewing a Fax
To view a scheduled or sent fax:
■ Click the View icon for the fax.
14 FaxFinder ® User Guide
MANAGING FAXES
Viewing Fax Details
Fax Details includes the fax size, status, schedule, cover page, sender, recipient, options (scheduled only), and delivery details (received only). To view details about a scheduled, received, or sent fax:
■ Click the fax’s Details icon.
Viewing Print Capture Fax Information
Use the Print Capture page to view information on faxes sent through another application's print function.
Viewing Print Captures
■ Click Print Captures.
Reschedule, view, or delete print captures as you would other faxes.
Note: Print capture faxes also appear on the fax status pages, where additional fax details are available.
Clearing Listed Print Captures
To clear the Print Capture list:
■ Click Delete All.
FaxFinder ® User Guide 15
MANAGING CONTACTS
Managing Contacts
Managing Contacts
FaxFinder allows users to fax to global and personal contact lists.
■ Global Contacts are stored in the fax server's global contact database and are available to all users.
■ Personal Contacts are stored with the user's account on the server and are available only to that user account.
Contact and Group Icons
Fax Status Description
Edit the contact's information.
Delete or Remove Contact. From the personal or global contact page, this deletes the contact. From the personal or global group page, this removes the contact from the group, but does not delete it from the server.
Edit the group. Click this to add or remove contacts.
Delete this group.
Adding Contacts
This process explains how to add individual contacts through the Fax Clients. To add multiple contacts, contact your administrator for information on importing contacts through the Web Management Interface.
1.
Click Contacts.
2.
To switch fax servers for this contact, select Fax Server from the drop down list.
3.
Select an Address Book.
Personal Contacts
Note:
Global Contacts
Your account needs access rights to add global contacts to FaxFinder. If you cannot add global contacts, check with your administrator.
For information on adding contacts to groups, see Using Groups.
4.
Click New.
5.
Enter the contact's Name, Fax Number, Phone Number, and Organization and click OK.
Editing a Contact's Information
To update a contact's information:
1.
Click Contacts.
2.
Select an Address Book from the drop-down list.
3.
Click the Edit icon for the contact record you want edit.
16 FaxFinder ® User Guide
MANAGING CONTACTS
4.
Make changes and click OK.
Deleting a Contact
To delete a contact's information:
1.
Click Contacts.
2.
Select an Address Book from the drop down list.
3.
Click the Delete icon for the contact you want to remove and confirm the deletion.
Configuring Default Scheduling Options
To set default fax scheduling options, including maximum number of attempts, priority, retry, and receipt options:
1.
Click Fax Servers.
2.
Click the Edit User Info icon for the server you want.
3.
Enter the desired settings and click OK.
Synchronizing Contact Lists
Both global contacts and personal contacts are stored on the FaxFinder server with personal contacts tied to a specific user account. Users can update contacts through both the FaxFinder Fax Client and the Fax Finder Fax
Server interface. To ensure the contact list on your fax client is current, synchronize your contacts.
To synchronize your contacts:
1.
Click Contacts.
2.
Select a Fax Server from the drop down list.
3.
Click Sync Contacts.
4.
Click Close.
Filtering Contact and Group Lists
When looking for a specific contact or group, use filtering to narrow the displayed list. To do this:
1.
In the Filter field, type all or part of the contact or group name.
2.
Click Apply.
Click Clear to remove the filter.
Using Groups to Manage Contacts
Using Groups to Organize Contacts
Groups are collections of multiple contacts that you can use for mass faxing. When you send a fax to a group, it is sent to every contact in the group.
To view groups:
■ Click Contacts and select Personal Groups to view the current user's groups.
FaxFinder ® User Guide 17
MANAGING CONTACTS
18
■ Click Contacts and select Global Groups to view the groups available to all users.
Creating Groups
To create a contact group:
1.
Click Contacts.
2.
To switch fax servers for this group, select a Fax Server from the drop down list.
3.
Select group type from the Address Book.
Personal Group
Global Group
4.
Click New.
5.
Enter a group Name and Description.
6.
Select Contacts. See Adding Contacts for details.
7.
Click OK.
Adding Contacts to Groups
To add contacts to a group, from the New Group or Edit Group page:
1.
Click Select Contacts.
2.
Select the Address Book you want.
Group contacts can be a mix of global and personal contacts.
3.
Check the contacts you want to add to the group and click OK.
Editing Groups
To edit a group:
1.
Click Contacts.
2.
Select the group's Fax Server.
3.
Select group type from the Address Book.
Personal Group
Global Group
4.
Click the group's Edit icon.
5.
Make desired changes.
To remove a contact from the group, click the contact's Remove icon. This does not delete the contact's information from the server.
6.
Click OK.
Deleting Groups
To a group:
1.
Click Contacts.
2.
Select the group's Fax Server.
3.
Select group type from the Address Book.
FaxFinder ® User Guide
Personal Group
Global Group
4.
Click the group's Delete icon and click Yes to confirm.
MANAGING CONTACTS
FaxFinder ® User Guide 19
ADDING AND MANAGING FAX SERVERS
Adding and Managing Fax Servers
Associating FaxFinder Fax Servers with the Client
After installing the FaxFinder Client software, associate it with one or more FaxFinder servers so users can send faxes through the server.
You need the following information for each FaxFinder server:
■ IP address, if you do not have the IP address, use Auto Discover.
■ Username
■ Password
Check with your administrator to determine which FaxFinder units to use with your computer.
1.
Start the fax client, if it is not running.
2.
Click Fax Servers.
3.
Add a FaxFinder manually or Auto Discover your servers.
■ If you have the IP address, click Add to add the unit manually and go to Step 4.
■ If you do not have the IP address, continue with Step 3a.
Note: Your firewall may require you to select Allow Access to search.
a.
Click Auto-Discover.
b.
Click the Add Server icon for the server you want to add.
4.
Enter Device information. If using Auto-Discover Device, skip to Step 4c.
a.
Enter the IP address in the Server Address field.
b.
If a secure login is required, check Use SSL.
c.
Enter the Username and Password required by the device.
Check Show Password to display the password instead.
Note: Username and password are case-sensitive.
5.
Click OK. Close the Auto Discover Device window, if using that option.
If Authentication Failure appears for that fax server, either:
■ The IP address is wrong. If so, delete the server (click the Delete icon) and add the server again; OR
■ The username and password combination is wrong. Click the Edit Server icon and enter the correct username and password.
Managing Fax Servers
To add or manage fax servers:
■ Click Fax Servers.
The Fax Server page lists descriptions, firmware, model, and status for each fax server associated with this fax client.
■ Click the arrow next to User to view current user details, default cover page and scheduling options.
20 FaxFinder ® User Guide
ADDING AND MANAGING FAX SERVERS
■ Click the arrow next to Schedule Options to view current default settings.
Fax Server Icons
Icon Description
Edit server login information and enable/disable SSL.
Attempt to reconnect a disconnected server.
Delete fax server from this fax client.
Edit user account information and set default cover page and scheduling options.
Add fax server.
Editing Fax Server Settings
To edit the username, password, and secure login status for a FaxFinder:
1.
Click Fax Servers.
2.
Click the Edit Server icon for the server you want to edit.
3.
Make desired changes and click OK to save.
Note: Check Use SSL to require a secure login for faxing.
Deleting a FaxFinder from the Fax Client
To delete a FaxFinder Fax Server from your fax client software:
1.
Click Fax Servers.
2.
Click the Delete icon for the server you want to delete.
3.
Click Yes to confirm.
Reconnecting FaxFinder
If the FaxFinder status is disconnected, attempt to reconnect. To do this:
■ Click Fax Servers.
■ Click the Reconnect icon for the disconnected server.
FaxFinder ® User Guide 21
CONFIGURING USER ACCOUNTS
Configuring User Accounts
Setting a Default Cover Page for Your User Account
To include a cover page with every fax by default:
1.
Click Fax Servers.
2.
Click Edit User Info.
3.
Check Yes to Include Cover Page.
4.
Select a Default Cover Page from the drop down list.
5.
Click OK.
Editing User Information
To edit your user information:
1.
Click Fax Servers.
2.
Click Edit User Info icon.
3.
Make desired changes and click OK.
User Information Fields
Set the following options for the current server.
Field
User Info
Name
Organization
Phone Number
Fax Number
Include Cover Page
Default Cover Page
Description
Enter your full name. FaxFinder uses this name as the fax sender's name.
Enter your email address.
Enter your organization.
Enter your voice number.
Enter your fax number.
Select Yes to include a cover page by default.
If you selected Yes to include a cover page, select a default cover page from the drop down list.
Schedule Options
Max Attempts Enter the maximum number of times you want FaxFinder to try to send the fax to a recipient.
22 FaxFinder ® User Guide
CONFIGURING USER ACCOUNTS
Field
Fax Priority
Retry Interval
Fax Receipt
Fax Attachment with
Receipt
Description
When multiple faxes are scheduled for the same time, FaxFinder sends those with a high priority before those with a low priority. Options, from highest to lowest priority, are:
■ 1st Priority
■ High
■ Medium/High
■ Medium
■ Medium/Low
■ Low
Enter the number of seconds FaxFinder should wait between retry attempts when a fax does not complete.
Select when you want a receipt sent to the email address in your user account.
Options are:
■ Never
■ Always, which sends a receipt with every fax attempt
■ Failure, which sends a receipt only when a fax is not successful
If you want the fax receipt to include an attachment of the original fax, select the attachment file format. Options are:
■ None
■ TIFF
Setting a Default Cover Page for Your User Account
To include a cover page with every fax by default:
1.
Click Fax Servers.
2.
Click Edit User Info.
3.
Check Yes to Include Cover Page.
4.
Select a Default Cover Page from the drop down list.
5.
Click OK.
FaxFinder ® User Guide 23
CONFIGURING THE CLIENT
Configuring the Client
Configuring Fax Client
To set header date and time format and configure fax client behavior:
1.
Click Configuration and select General Configuration.
2.
Make desired changes.
3.
Click OK.
General Configuration
Field Description
(Windows only) Minimize client on Check to automatically minimize the fax client window when you click the X in close the fax client's upper right corner
Minimize client after scheduling Check to automatically minimize the fax client window when you schedule a fax.
(Windows only) Use local client conversion for TXT and PDF
Check to use the client to convert documents to TXT or PDF. If this is not selected, the server handles conversions.
Date Format
Time Format
Print captures
Select a date format.
Select 12 or 24 hours.
Auto-refresh, minutes
Select a number of print captures to keep after they have been printed.
Clearing print captures saves disk space.
Select a interval for automatically updating the fax status information display.
Options are (in minutes): 1, 3, 5, 10, or None.
24 FaxFinder ® User Guide
CONFIGURING THE CLIENT
Configuring Contacts
1.
Click Configuration and select Contacts Configuration.
2.
Select a Default Address Book. Options are:
■ Personal Contacts
■ Global Contacts
■ Personal Groups
■ Global Groups
■ Outlook Contacts (Windows only)
3.
(Windows only) To include Microsoft Outlook contacts, check Include Outlook Contacts.
(Mac only) To include Address Book contacts, check Include Address Book Contacts.
4.
Click OK.
Checking Client Software Version
To determine which version of the client software you have:
■ (Windows only) Click Help > About.
■ (Mac only) ClickFaxFinder Client > About FaxFinder Client.
FaxFinder ® User Guide 25
CONFIGURING AND VIEWING LOGS
Configuring and Viewing Logs
Configuring Log Options
To configure fax log settings for the fax client software on your computer:
1.
Click Logs.
2.
Set a Log Level. Refer to Logging Options, for details.
3.
Select a folder for Log Location.
a.
Click Browse. b.
Highlight the folder you want and click Select Folder.
4.
To close Manage Logs, click OK.
Logging Options
Field
None
Errors
Warning
Information
Debugging
Description
No log data captured..
Collects the least information.
Collects errors and warning information.
Collects detailed information.
Collects most detailed information.
26 FaxFinder ® User Guide
Viewing Fax Logs
To view the current log:
■ Click Logs and then click View Log.
To open the log folder to find and view any log file:
1.
Click Logs and then click View Application Data.
2.
Double-click a log file in the Logs folder to open it.
Deleting Logs
To erase the current log:
1.
Click Logs
2.
Click Delete Log and confirm the deletion.
3.
To close Manage Logs, click OK.
To delete all log files:
1.
Click Logs
2.
Click Delete All Logs and confirm the deletion.
3.
To close Manage Logs, click OK.
CONFIGURING AND VIEWING LOGS
FaxFinder ® User Guide 27
MULTI-TECH TIFF VIEWER
Multi-Tech TIFF Viewer
Use the Multi-Tech TIFF Viewer to view faxes as an image. You can view thumbnails, zoom, magnify, scroll, and rotate the fax image. You can also use it to manipulate and alter the graphic files.
Toolbar Icons
Image Icon
Open File
Description
Opens image.
Print Prints image.
Copy
Normal view
Fit to Width
Copies image.
Restores the image to the normal view.
Resizes the image to fit the width of the viewer window. You may need to pan down to see the length of the document.
Fits the entire image in the viewer window.
Fit to Window
Center Full
Image
Zoom in (+)
Centers the image in the viewer window.
Click to increase image size.
Click to decrease image size.
Zoom out (-)
Magnify Area
Pan
Page Down
(Spot Magnifying Glass). Click on the area you want to magnify. If you hold the mouse button down, the mouse pointer will become a rectangle that shows a magnified view of the area. If you drag the mouse, the area in the magnifier will update to magnify the content currently under the mouse pointer. This function opens a secondary window that shows the magnified area. You can adjust the size of this window by dragging on its borders. Relocate this window by putting the clicking inside the window and dragging it to a new position.
(Omni-Directional Scroll). Click the Hand icon to pan through the image. Then hold down the mouse button and drag the mouse to move the image.
Use these to page down through a multiple page fax document.
Current Page Shows the current page number. To change pages, select a page from the drop down list.
Use these to page up through a multiple page fax document.
Page Up
Rotate Left/Right Click to rotate the document by 90 degrees to the left or right.
Flip Horizontal Flips the image horizontally.
28 FaxFinder ® User Guide
MULTI-TECH TIFF VIEWER
Image Icon
Flip Vertical
Invert
Black/White
Info
Quit
About
Description
Flips the image vertically.
Reverse the colors on black and white images. Disabled for color TIF files.
Displays information about image, including file name and path, compression, dimensions, colors, and resolution.
Exits the viewer.
Viewer software information.
Thumbnail View
The thumbnail image on the left of the viewer window shows a small version of the current image as well as the dimensions. Left-click on the thumbnail image to reset the current image to the original view. This does not undo any changes that were saved.
FaxFinder ® User Guide 29
INSTALLING FAXFINDER CLIENT ON WINDOWS OR MAC
Installing FaxFinder Client on Windows or Mac
Installing FaxFinder Client Software on Windows
FaxFinder Fax Client software allows users to send faxes through the Client or any application with a print option.
Install the FaxFinder client software on each user's computer and then associate it with a FaxFinder unit. You can push the client software out to user computers or install it on one computer at a time.
Note: You will need to login with administrator rights to install the software.
Attention: If you have an old version FaxFinder client software installed, uninstall that software before installing a new version. Use the Add or Remove Programs utility in the Windows Control Panel to uninstall or use mass uninstall.
Installing the Software on a Single Computer
Warning: If you have old versions of any FaxFinder client software installed, uninstall that software before installing a new version. Use the Add or Remove Programs utility in the Windows Control Panel to uninstall.
To download the FaxFinder client software:
1.
Go to www.multitech.com/setup/product.go and select your FaxFinder model.
2.
Click Software.
3.
Double-click the link for the version you want to install and select Run or Open, depending on your system. If you get a message about the publisher not being verified, click Run. If you get a message about the file not being commonly downloaded, click Actions > Run Anyway. Some browsers may require you to save the file before running it.
4.
Click Next.
5.
Check to accept the license agreement and click Next.
6.
Browse to the location where you want install the FaxFinder client. The default file location is recommended.
7.
To begin installation, click Install.
8.
To launch FaxFinder when installation completes, check Start the FaxFinder Client when the install is
finished and click Finish.
If you chose to start FaxFinder after installation, the FaxFinder application icon, , appears in your System Tray and the client launches automatically.
Note: To send faxes, you need to associate FaxFinder Fax Servers with your client. Refer to Associating
FaxFinder Fax Servers with the Client under Managing Fax Servers.
30 FaxFinder ® User Guide
INSTALLING FAXFINDER CLIENT ON WINDOWS OR MAC
FaxFinder Printer Usage Rights
If your users have a problem printing faxes, verify usage rights for the printer.
1.
In Windows, open the printer's Properties.
2.
On the Security tab, verify the following checked under Allow:
■ Manage Printers
Installing FaxFinder Client Software on a Mac
You need Mac OS X 10.7 or newer to install the FaxFinder Client for Mac.
To install the client on a Mac
1.
Mount the disk image (.dmg) by double-clicking the FaxFinder Client .dmg file.When the disk image mounts, a FaxFinder window opens showing the disk image contents, the InstallFaxFinderClient.pkg and this Readme file.
2.
Double-click on InstallFaxFinderClient.pkg. If you get a warning that “InstallFaxFinderClient.pkg ” can’t be opened because it is from an unidentified developer, click OK.
This warning means your Security & Privacy System Preferences setting is safeguarding you against automatic download and installation.
FaxFinder ® User Guide 31
INSTALLING FAXFINDER CLIENT ON WINDOWS OR MAC
32
3.
To override the warning, right-click or control-click on InstallFaxFinderClient.pkg and select Open from the pop-up menu.
4.
If you get another warning that InstallFaxFinderClient.pkg is from an unidentified developer. Click Open to continue.
FaxFinder ® User Guide
INSTALLING FAXFINDER CLIENT ON WINDOWS OR MAC
The installer launches in the background. If other application windows are open, you may need select the Installer app in the Dock or use Command-Tab to scroll through active applications to select the Installer so that Installer window displays in the foreground.
5.
Follow on-screen instructions to install the FaxFinder Client. Close the Installer when complete.
6.
Unmount the disk image after closing the Installer.
FaxFinder ® User Guide 33
INDEX
Index
A add
contacts....................................................................16
contacts to groups ...................................................18
documents .................................................................6
recipients ...................................................................6
API faxing ......................................................................12
C client software
associate with FaxFinder unit ..................................20
install........................................................................30
install on Mac...........................................................31
install on Windows ..................................................30
configure
fax client...................................................................24
logs...........................................................................26
configure fax client .......................................................24
contact
filter list....................................................................17
remove from group..................................................18
synchronize list ........................................................17
contacts
add ...........................................................................16
default list ................................................................25
delete .......................................................................17
edit ...........................................................................16
groups ......................................................................17
cover page
attach to fax...............................................................6
set default...........................................................22 23
create
group........................................................................18
D
debugging level .............................................................26
default
log ............................................................................27
scheduling options..............................................17 21
delete
contact .....................................................................17
fax ............................................................................14
FaxFinder unit from the fax client software ............21
group........................................................................18
34
print captures ..........................................................24
documentation................................................................5
E edit
contacts....................................................................16
group........................................................................18
user information ......................................................22
send fax via ..............................................................10
exit software ...................................................................5
F fax
client ...................................................................20 30
client on Mac ...........................................................31
client on Windows ...................................................30
delete .......................................................................14
print capture ...........................................................15
reschedule................................................................14
send...............................................................6 7 10 12
send (Mac) .................................................................8
status .......................................................................13
view details ..............................................................15
view scheduled ........................................................14
FaxFinder
delete unit from software........................................21
reconnect .................................................................21
status .......................................................................13
fax server
icons.........................................................................20
management............................................................20
file formats......................................................................6
filter
list.............................................................................17
G group
add contacts.............................................................18
create .......................................................................18
delete .......................................................................18
edit ...........................................................................18
FaxFinder ® User Guide
INDEX
filter list....................................................................17
groups ...........................................................................17
I install
client software .........................................................30
client software on Mac ............................................31
client software on Windows....................................30
L log
delete .......................................................................27
level..........................................................................26
save ..........................................................................26
view..........................................................................27
M
manage fax server.........................................................20
max attempts ........................................................7 17 21
minimize
after scheduling .......................................................24
on close....................................................................24
O
Outlook contacts...........................................................25
P print
capture................................................................14 15
capture delete.....................................................14 24
send fax via ................................................................7
send fax via Mac Print Plug-in ...................................8
printer
usage rights..............................................................31
R
reconnect FaxFinder .....................................................21
reschedule fax ...............................................................14
retry interval .........................................................7 17 21
S
schedule ..........................................................................7
send fax ...........................................................................6
API............................................................................12
print .................................................................7 10 12
print for Mac..............................................................8
send immediately............................................................7
software
configure ..................................................................24
version .....................................................................25
start software..................................................................5
status
fax ............................................................................13
FaxFinder units.........................................................13
synchronize contacts.....................................................17
T
TIFF viewer ....................................................................28
U user
associate with FaxFinder unit ..................................20
information .............................................................22
edit ........................................................................22
set default cover page ........................................22 23
V
version...........................................................................25
view
contacts....................................................................16
fax ............................................................................14
fax details.................................................................15
log ............................................................................27
print capture ............................................................14
print capture information ........................................15
W web interface
send fax via ..............................................................12
FaxFinder ® User Guide 35
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement