- Industrial & lab equipment
- Electrical equipment & supplies
- Power conditioning
- Power supply units
- Eaton
- APR48
- User manual
advertisement
Eaton Telecommunications Power Solutions Business
Eaton DC Power Solutions
Eaton
®
Telecommunications Power Solutions - Capabilities Overview
Product Selection Chart
DC Power Solutions
Enterprise 3G Power Solutions - EPS2-3G
Enterprise Extended Battery Module
Access 3G Power Solutions - APS3-400 (48V)
APS6-3G Access Power Solutions (UL Series)
DV2-3G Metro Power Solutions (UL listed)
DV2-3G Metro Extension Battery Cabinet (UL listed)
DV2-3G North American Core Power Solutions
Inverter Power Solutions
Matrix™ 2000 Standalone Inverter
Software and Communications
DCTools™ Configuration Software
Rectifier Modules
Enterprise 3G Power Rectifier - EPR48-3G
Access 3G Power Rectifier (48V) - APR48-3G
Access Power Energy Saver Rectifier – APR48-ES
Core 3G Power Rectifier (48V) - CR48-3G
Control and Monitoring
SC200 System Controller
SiteSure-3G Management Solution
Distributions
DCD1M – 1U DC Distribution (19”)
DCM2000 – Distributions with Plug-in MCBs
DCB1000 – Distributions with High Current Breakers
DCF0208/0408 – Distributions with Din Fuse
Contact Information:
DC Technical Support:
Ph 800-843-9433 (opt. 2 : opt. 6)
General email inquiry: [email protected]
Internet: www.eaton.com/dcpower
Eaton DC Power Solutions
Eaton's Telecommunications Power
Solutions Business
Our Business
Eaton Corporation is a global diversified industrial manufacturer and a leader in electrical power quality, distribution and control. Eaton serves the needs of customers located in over 125 countries.
Eaton’s telecommunications power solutions business provides telecommunications and related sectors with worldleading infrastructure products and services.
Global Presence
Headquarters are located in
Raleigh, North Carolina and regional sales headquarters are located in USA, Asia and Europe with offices in over 30 additional countries and with representation in over 100 countries it is one of the few telecommunications infrastructure providers with a truly global presence.
Environmental Standards
Eaton strives for the highest environmental standards across both our operations and products and our commitment goes beyond compliance with existing regulations. We wish to become recognized as an industry leader in creating safe workplaces and conserving world resources.
Eaton is committed to environmental stewardship and participates in a number of volunteer government partnership programs worldwide.
W e were among the first diversified industrial companies to pursue global ISO 14001 certification - a rigorous standard for managing and improving environmental performance.
Today, virtually all of Eaton's facilities worldwide have earned this designation.
We've also set tough performance goals for ourselves,
Comprehensive Range
like reducing our greenhouse gas emissions by 18 percent
Our telecom power solution range includes AC and DC
(adjusted for production) by
2012. power systems, power and ancillary equipment management software, cabinets
Unsurpassed Experience
and enclosures, and other products. Eaton also offers a
Eaton has in excess of 40 years experience of working closely with customers to deliver wide range of DC services including design, installation and tailored power management solutions. for communications networks around the world. commissioning remote monitoring, turnkey integration and site support, to provide a seamless solution.
Customer led Solutions
Delivery
Eaton’s insight into customer needs is demonstrated through its products in terms of reliability, efficiency, smart energy features, power density, and ease of installation,
Intelligent monitoring and control capabilities add flexibility, precision, reliability, and automation - without added complexity.
Eaton’s global scale manufacturing and logistic capability means that products and services can be delivered with maximum costeffectiveness and with the delivery speed and flexibility that you expect.
Eaton DC Power Solutions
Eaton's Telecommunications Power
Solutions Business
Services Capability
Eaton’s offers a wide range of
DC secure power services including power quality evaluation, sizing, design consultancy, installation and commissioning, full project management and turnkey integration, anywhere in the world.Our individually tailored service contract plans can provide ongoing service maintenance, training, after-sales service, and repairs, Eaton’s global presence ensures quick response times for all of our customers.
Design Services
Skilled engineering staff can provide a full design service for
DC power systems to specifically suit individual applications and sites.
World-Wide On-Site
Services
Eaton’s fully trained customer service engineers can carry out all installation tasks or supervise and assist local staff.
Integration Services
Our telecommunications integration services provide complete install, testing and integration services for any type of communications or other electronic equipment, to world leading standards of quality.
Typical projects Eaton has completed include the integration of network access equipment into roadside cabinets and the on-site installation and commissioning of telecoms equipment.
Eaton is now applying this expertise to the provision of integration services for original equipment manufacturers and network operators.
Power Monitoring
Eaton can provide 24 x 7 DC power system and battery monitoring, and provide remote diagnostics to maximize responsiveness and uptime,
Monthly performance reports and trend analysis assist optimum system performance.
Eaton DC Power Solutions
Eaton's Telecommunications Power
Solutions Business
After-Sales Service and
Repairs
Eaton DC Regional Repair Sites, staffed by fully trained technicians, are strategically located around the world to provide rapid turnaround times.
Individually tailored service contracts are also available so customers can choose the ongoing service package that best suits their requirements. warranty periods, unlimited outof- warranty repairs, immediate replacement, on–site maintenance, and battery testing
Training
Eaton offers a comprehensive range of training courses designed to provide the right level of product knowledge with and conditioning. Special terms and conditions apply to some DC services. practical demonstrations and hands-on opportunities. Courses can be arranged at an Eaton location or at a customer’s site.
Eaton DC Power Solutions
Eaton DC Power Solutions
1. Including DV2 (Data-Voice-Video) Power Solutions with APR rectifier modules.
2. Including DV2 (Data-Voice-Video) Power Solutions with CPR rectifier modules.
3. Systems with higher output are also available
Email: [email protected]
Internet: www.eaton.com/dcpower
Eaton DC Power Solutions
The Eaton ® 3G Enterprise
Power Solutions are the ideal solution for converged data networks and low power telecommunications applications requiring compact, efficient and flexible DC power supplies.
This EPS2 series is a 19” rack mounted system and is available with up to two of the Eaton 3G
Enterprise or Access 48V rectifier modules providing a total output of up to 4000W.
Communication features of the
SC200 system controller include TCP/IP, SNMP and an onboard web server allowing access with standard web browsers. The SC200 also supports GSM cellular
(including text messaging) and standard PSTN modems.
The Enterprise systems include an integral DC distribution panel with easy to fit push-in circuit breakers and low voltage
The versatile SC200 system controller features a front access
USB port for ease of system setup along with a RS232 rear port and a 10BaseT Ethernet port for remote networking and communications. disconnect contactor to prevent over discharging of the optional backup batteries.
Typical applications include providing secure power for customer premises equipment, roadside cabinets, converged
VoIP/data networks, PoE, IP routers and small PABX’s.
19” rack mounting
High power density
Intelligent system controls
Pre-configured software
Onboard secure web server
Push-in easy to fit circuit breakers
Low voltage disconnect
Fast on-line expansion of rectifiers (hot-swap)
High efficiency and unity power factor
Easy to use menu & full color display
Optional batteries
Compatible with Eaton’s Energy Saver (ES) rectifier
Input
AC Supply Nominal: 120V, 240V
Operating Range: 90V – 275V
Power Factor † >0.99 (50 – 100% Output Current)
Efficiency † >96% peak
>95% (20% to 100% load, 230Vac)
Output
DC Output
Voltage Range
DC Output
Power
(maximum*) †
43 – 57.5V
240V AC:
120V AC: data sheets.
APR48-ES: 4.0kW
APR48-3G: 3.6kW
EPR48-3G: 1.8kW
APR48-ES: 2.3kW
APR48-3G: 2.2kW
EPR48-3G: 1.1kW
* Based on two rectifiers fitted, refer to rectifier
Environmental
Operating
Temperature
Range
Rated: -10°C to +50°C [-14°F to +122°F]
Extended*: -40°C to +70°C [-40°F to +158°F]
*Output current is derated above 50°C [122°F]
Mechanical
Dimensions
H,W,D
2U , 19” mounting, 14.1” [360mm]*
* Additional clear depth space is required for exhaust air.
System
System
Controller
DC Distribution
Module
Communication
Features
Rectifier Blank
Panels
SC200
12-way circuit breakers (2 x Battery, 10 x Load)
Circuit breaker type: Magnetic/Hydraulic, push fit
Battery circuit breakers: Heinemann AC1R Series
Typical ranges available: 30A, 40A, 50A, 60A, 70A
Load circuit Breakers: Heinemann JC1S Series
Typical ranges available: 6A,10A, 15A, 20A, 25A,
30A
USB direct
10BaseT Ethernet, TCP/IP, SNMP, Modbus-TCP,
Modbus-RTU and on board web server
RS232 to external PSTN or GSM modem (modem not included)
For unused rectifier positions
Software
DCTools Configuration software.
Free download from: www.powerware.com/downloads
Power Xpert Remote control and monitoring software
† Power factor, efficiency and DC output power are dependent on
rectifier model fitted. Refer to the rectifier data sheet for further details.
Options
Battery* Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)
Weight: 29.5kg [65lb]
Dimensions (H,W,D*): 85mm (2U), 432mm (19” mounting), 487mm
*Additional space is required at the rear for cables.
Typical Run time values* (see graph).
Battery Run Time (minutes)
Equipment Power (watts) )
= Required number of battery modules.
*Battery times are approximate and vary depending on factors such as: - load configuration
- battery charge
- battery age and temperature.
* Other battery options available - consult your local
Battery Cables or
Equipment
Cable
EBM Rack
Mounting Kit
Eaton agent.
CKBATT-02 Eaton EBM 5130 connection cable,
2000mm long
CKBATT-01 ‘other batteries’ connection cable,
2000mm long
Customer Equipment Connection Cable
CKLOAD-00 10-way connection loom, 1000mm long
Included with the EBM as standard
Certifications
All products comply with International Standards.
North America UL (Canada, USA), FCC Class B
Europe CE
Australia and New Zealand C-Tick
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.dcpower.eaton.com
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2012 Eaton Corporation All Rights
Reserved EPS2_F
Eaton DC Power Solutions
Eaton 5PX version pictured
The Eaton ® 3G Enterprise
Extended Battery Module
(EBM) is designed as an optional integrated backup power source to the 3G Enterprise Power
Systems, providing secure
The scalability of the EBM ensures that your investment is protected into the future as the demands of your network increase. Simply add more
EBM modules as your network power during AC grid failure for anything from orderly grows. shutdowns through to extended runtimes for continuity of service.
EBM has an 18Ahr capacity and is service maintenance free for the life of the battery module.
Battery function is monitored
Multiple battery modules can be connected together to achieve increased backup capacity for a given output demand. and controlled by the power system controller for complete battery protection.
This module is slim and rack mountable to suit the likely applications for these systems such as server room racks.
The battery modules use simple
‘plug and play’ cables for connecting the Enterprise Power
Solution. No specialized tools are required, thus making installation very easy in an IT environment.
Easy to install
Slimline 19” rack mounting
Extended runtime -18Ahr capacity
Modular and scalable
Service maintenance free VLRA batteries
Output
DC Output
Voltage
DC Output
Capacity
48V nominal
18Ahr
Maximum input/output current should not exceed
55Amps
Mechanical
Weight
Dimensions
H,W,D
29.5kg
85mm (2U), 432mm (19” mounting), 487mm*
* Additional space is required at the rear for cables.
Battery
Typical Run Time Values*
Battery Run Time
(minutes)
Equipment Power (watts) )
= Required number of battery modules.
*Battery times are approximate and vary depending on factors such as:
- load configuration
- battery charge
- battery age and temperature.
Order Number Eaton Extended Battery Module (EBM)
5PX version - 5PXEBM48RT (available globally)
5130 version - 103006587-6591 (EMEA only)
Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
North America UL listed
Europe CE
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2012 Eaton Corporation All Rights
Reserved EBM_D
Eaton DC Power Solutions
3G Access Power Solutions -
APS3-400 Series
Features
• Compact and scalable 19” sub-rack solution
• High power density (5.4kW @ 48V/3U, 19”)
• Easy plug-and-go rectifier set-up
• Fast on-line rectifier expansion (hot-plug)
• High efficiency and unity power factor
• Single AC input or individual rectifier feeds
• Intelligent system management features
• Remote access (TCP/IP, web browser, SNMP)
• Pre-configured software for quick & simple deployment
• Onboard energy management software optimizes operating efficiency for lower OPEX
The Eaton ® 3G Access Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible
DC power supplies with or without batteries.
This Eaton 3G Access Power
Solution 400 series has UL and
FCC standards certifications. A technician friendly user-interface includes a full color menu screen and is preconfigured for fast install and easy commissioning.
All system settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
The advanced SC200 system controller offers high-level communications capability for real time information. It also has built-in intelligence for optimizing system efficiency, and comprehensive alarm and system status notifications, which are all designed to minimize operational expenses.
A comprehensive range of other controller features ensures maximum battery life and optimum system performance under a wide range of environmental conditions.
The 19” rack mount system is ideal for rapid deployment into customer facilities or enclosures.
With up to 6kW of power output, it features state-of-theart 48V 3G or Energy Saver (ES)
Access Power Rectifiers for superior operating efficiency
(>96%). The DC distribution panel, simple to use hydraulic magnetic circuit breakers, and optional low voltage disconnect
(LVD) modules are fully integrated.
Typical applications include standby power for customer premises equipment, outdoor power plants, data networks and
IP routers.
Technical Specification
Input
APR48-3G : 92% (50 – 100% Output Current)
APR48-ES : >96% peak,
90V – 275V*
* Output power derates below 175V AC.
Power Factor† >0.99 (50 – 100% Output Current)
Efficiency†
Operating Range:
Total Harmonic
Distortion
>95% (20% to 100% load, 230Vac)
<5% THD from 50% to 100% at load.
Output
DC Output
Voltage Range
DC Output
Power
(maximum)†
Mechanical
Dimensions
H,W,D
43 – 57.5V
APR48-3G : 120V AC: 3.3kW @ 48V
208-240V AC: 5.4kW @ 48V
APR48-ES : 120V AC: 3.45kW @ 48V
208-240V AC: 6kW @ 48V
Environmental
Temperature
Range
Rated:
Extended:
-10°C – +50°C [14°F – +122°F]
-40°C – +65°C [-40°F – 149°F]*
* Output current is derated above 50°C [122°F]
3U [5.25”, 133mm], 19” [483mm] mounting,
14” [356mm]*
* Additional clear space is required for exhaust air.
Rear access is required for cable terminations.
System
System
Controller
DC Distribution
Module
SC200 as standard.
SC100 optional.
10-way circuit breakers (2 x Battery, 8 x Load).
Load circuit breakers: Heinemann AMIR Series
5A,10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A.
Battery circuit breakers: Heinemann AMIR 100A or
AMIP 120A.
Communication
Features 10BaseT Ethernet*, TCP/IP*, SNMP*, Modbus-
TCP*, Modbus-RTU* and on board web server*
RS232 to external PSTN or GSM modem (modem not included)
*SC200 only
Battery disconnect: 200A internal. Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
For unused rectifier positions.
Batteries.
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet for more information.
Software
Free download from: www.powerware.com/downloads
Power Xpert Remote control and monitoring software
Certifications
All products comply with International Standards including UL (US and
Canada) and FCC (Class B) Verification.
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2010 Eaton Corporation
All Rights Reserved
APSX-400 E
Eaton DC Power Solutions
High power density (12kW @ 48V/6U, 19”)
Suitable for both 19” relay rack or enclosed cabinet
High efficiency and unity power factor
Easy fit plug-in hydraulic/magnetic circuit breakers.
20-way load and 6-way battery distributions
Single or dual low voltage disconnect (LVD) options
SC200 or SC100 intelligent system controller
Onboard energy management software optimizes operating efficiency for lower OPEX
Pre-configured software for quick & simple deployment
Remote access (TCP/IP, web browser, SNMP)
Easy plug-and-go rectifier set-up
Fast on-line rectifier expansion (hot-plug)
The Eaton ® 3G Access Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible
DC power supplies with or without batteries. Typical applications include standby DC power for customer premises equipment, outdoor power plants, data networks and IP routers.
The APS6-400 series has up to
12kW of power output, it features state-of-the-art 48 volt
3G Access Power Rectifiers, an integral DC distribution panel, easy to fit plug-in hydraulic magnetic circuit breakers, and optional low voltage disconnect
(LVD) modules for battery and non priority loads.
A technician friendly userinterface includes a full color menu screen and is preconfigured for fast install and easy commissioning.
The 19” rack mount system is ideal for rapid deployment into customer facilities or enclosures.
The advanced system controller offers high-level communications capability for real time information. It also has built-in intelligence for optimizing system efficiency, and comprehensive alarm and system status notifications, which are all designed to minimize operational expenses.
All system settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
Other features include temperature compensated voltage output, automated equalize charging, and integrated battery testing, for maximum battery life under a wide range of environmental conditions.
Input
AC Supply† Nominal:
Operating Range:
120V, 208-240V
90V – 275V*
* Output power derates below 175V AC.
Power Factor† >0.99 (50 – 100% Output Current)
Efficiency† By system rectifier type:
APR48-ES: >95% (20 - 100% output current)
APR48-3G: 92% (50 - 100% output current)
Total Harmonic
Distortion
<5% THD from 50% to 100% at load.
Output
DC Output
Voltage Range
DC Output
Power
(maximum)
43 – 57.5V
Rectifier type: APR48-3G APR48-ES
110/120V AC:
208-240V AC:
6.6kW @ 48V 6.9kW @ 48V
10.8kW @ 48V 12kW @ 48V
Environmental
Temperature
Range Rated: -10°C to +45°C [14°F to +122°F]
Mechanical
Dimensions
H,W,D
6U [10.5”, 267mm], 19” [483mm] mounting,
15.3” [390mm]*
* Additional clear space is required for exhaust air.
Rear access is required for cable terminations.
System
System
Controller
DC Distribution
Module
SC200 as standard.
SC100 optional.
26-way circuit breakers (6 x Battery, 20 x Load).
Load circuit breakers: Heinemann AMIR Series
5A,10A, 20A, 30A, 40A, 50A, 70A, 80A, 100A, 120A
(2-pole).
Battery circuit breakers:
6 x Heinemann AMIR 80A, 100A
or 3 x Heinemann AMIP 120A, 150A, 200A.
Communication
Features of
SC200
USB direct.
10BaseT Ethernet, TCP/IP, SNMP, On board web server.
RS232 to external PSTN or GSM modem (modem
Low Voltage
Disconnect
(LVD) (Optional)
Rectifier Blank not included).
Battery disconnect: 400A internal.
Non priority load: 200A internal.
For unused rectifier positions.
Panels
Options Relay Rack
Batteries.
† Power factor, efficiency, AC voltage range and output power is dependant on rectifier module fitted. Refer to the rectifier data sheet for more information.
Software
DCTools Configuration software.
Free download from: www.powerware.com/downloads
PowerManagerII Remote control and monitoring software
Certifications
North America: UL listed 1801, cUL, FCC
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation All Rights
Reserved APS6-400 D
Eaton DC Power Solutions
48Vdc systems up to 600A maximum load current.
24Vdc systems up to 500A maximum load current.
Eaton DV2-3G Metro Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible DC power. Typical applications include standby DC power for customer premises equipment, outdoor shelters,
VoIP, PABX, data networks and
IP routers.
The DV2-3G Metro series has up to 40kW of output for load and battery recharge. It features state-of-the-art Access 3G, or
Energy Saver rectifiers, an integral DC distribution panel with easy to fit plug-in hydraulic magnetic circuit breakers, and optional low voltage disconnects
(LVD) for battery and non priority loads. Each cabinet has fitted integrated battery shelves for up to 4 strings of 48V, or 8 strings of 24V, high capacity VRLA batteries. Optional battery cabinets for extended back-up time are also available.
A technician friendly userinterface includes a full color menu screen and is preconfigured for fast installation and easy commissioning.
System settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
The advanced SC200 system controller offers high-level communications capability for real time information, including an Ethernet port for connecting directly to the Internet. It also has built-in intelligence for optimizing system efficiency, and comprehensive alarm and system status notifications, which are all designed to minimize operational expenses.
Other features include temperature compensated voltage output, automated equalize charging, and integrated battery testing, for maximum battery life under a wide range of environmental conditions.
High power density.
High efficiency and unity power factor.
Fast on-line expansion of rectifiers (hot-swap).
Integrated batteries.
Low voltage disconnects for battery and non priority loads.
Easy fit plug-in hydraulic/magnetic circuit breakers.
Flexible AC input.
Intelligent system management features.
Pre-configured software for quick & simple deployment.
Automatic battery condition testing.
Remote access (TCP/IP, web browser, SNMP).
Energy management software optimizes operating efficiency for lower OPEX.
All cabling top entry with optional rear cable duct extension for raised floor cable access.
Input
AC Supply
Voltage*
AC Input
Frequency
North America:
3P 208Vac nominal
2P 240Vac nominal
Global:
3P + N 230/400Vac nominal
1P + N 230Vac nominal
50/60 Hz
System
Rectifier
Module*
Nominal
Output
Voltage
Output
Voltage range
Max Number of Rectifiers
Maximum DC
Power †
Maximum
Load Current
APR24-3G APR48-3G APR48-ES
24Vdc
20–30Vdc
10
14.4kW
500A
48Vdc
40–58Vdc
20
36kW
600A
48Vdc
40–58Vdc
20
40kW
600A
Efficiency >91% >92% >96%
† Maximum DC power includes load and battery recharge.
Supervisory
Module
Communications
Batteries
SC200
10 baseT Ethernet port, web server, SNMP agent
Extension
Battery
Cabinets
Type: Front access VRLA
48V: Up to 600Ahr per cabinet using four strings of
150Ahr batteries.
24V: Up to 1200Ahr per cabinet using eight strings of
150Ahr batteries.
Up to six extension battery cabinets fitted with either four strings of 48V or eight strings of 24V in each cabinet
DC
Distribution
Load circuit
Breakers
Single Width
Circuit
Breakers
Dual Width
Circuit
Breakers
Triple Width
Circuit
Breakers
20-way total
Heinemann AMIR Series 5A, 10A, 20A,
30A, 40A, 50A, 70A, 80A, 100A
Heinemann AMIP 120A, 150A, 200A
Heinemann AMIP 250A
Battery Circuit
Breakers
Low Volt
Disconnect
Options
Heinemann AM1P, 200A integrated into battery shelf
1 x battery disconnect, 1 x 400A non-priority load (10 positions for non priority, 10 positions for priority).
Mechanical
Dimensions
H,W,D
With rear cable
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”] duct extension
H,W,D
Weight
2000mm [78.7”], 600mm [23.6”], 750mm [29.6”]
DV2-A20B-xxxx:
900kg [1980lb] typical maximum with 20 rectifier modules and 4 x 48V/150Ah battery strings.
Environmental
Operating
Temperature
Range
Humidity
Altitude
-25°C [-13°F] to 40°C [104°F]*
<95% non-condensing
<2000m (6500’). Thermally de-rates above this altitude, to a maximum altitude of 4000m
Certifications
All products comply with International Standards. Contact your local
Eaton Power Quality representative for details on the specific product versions available with these safety and EMC approvals:
North America: UL Listed 1801, cUL, FCC
*Refer to rectifier specifications for more information.
System capacity will vary depending on number of rectifiers and batteries selected.
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation. All Rights
Reserved. DV2-3G UL C
Eaton DC Power Solutions
DV2-3G Metro Power Solutions
Extension Battery Cabinet (UL Listed)
48Vdc : 4 strings
24Vdc : 8 strings
Eaton 3G Metro Power
Solutions are ideal for low to medium power telecommunications applications requiring compact, efficient and flexible DC power. Typical
The Extension Battery Cabinet can be fitted with an optional DC
Distribution, extending the number of output circuits available from the power cabinet. These distributions utilise easy fit, plug-in hydraulicmagnetic breakers applications include standby DC power for customer premises equipment, outdoor shelters,
VoIP, PABX, data networks and
IP routers.
The Extension Battery cabinet allows customers to easily
When connected back to a DV2-
3G Metro power cabinet, features include automatic temperature compensation,
Battery MCB alarm monitoring, automatic equalizing and fast charging, and automatic battery testing. configure and install additional battery back-up time for critical telecom and IT equipment. Up to six Extension Battery
Cabinets can be installed in addition to the DV2-3G Metro cabinet. This gives a total battery capacity of up to 4200Ahr in
48Vdc solutions, or 8400Ahr in
24Vdc solutions.
All cable entry is top access. An optional rear cable duct extension is available to allow cables to be run to the top of the cabinet in raised floor situations.
Features
• 24” x 24” cabinet
• 4 Battery Shelves
• Optional DC distribution with easy fit plug-in hydraulic/magnetic circuit breakers.
• UL Listed
Technical Specification
System Interconnections
Communications
Power
Screw terminals
Direct onto busbars
DC
Distribution
(Optional)*
Load Circuit
Breakers
Single Width
Circuit
Breakers
Heinemann AMIR Series 5A, 10A, 20A, 30A, 40A, 50A,
70A, 80A, 100A.
Dual Width
Circuit
Breakers
Triple Width
Heinemann AMIP 120A, 150A, 200A,
Heinemann AMIP 250A,
Circuit
Breakers
*Power is feed to the optional DC distribution from a load circuit in the
Power Cabinet. See power system documentation for more details.
Batteries*
Certifications (Pending)
All products comply with international standards. Contact your local Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
North America: UL Listed 1801, cUL, FCC
In the interests of continual product improvement all specifications are subject to change without notice.
48V Batteries Up to 600Ahr per cabinet using four strings of 150Ahr batteries.
24V Batteries: Up to 1200Ahr per cabinet using eight strings of
150Ahr batteries.
*Maximum of 6 battery cabinets added to the power cabinet per system
Mechanical
Dimensions
H, W, D
With rear cable duct extension
H,W,D
2000mm [78.7”], 600mm [23.6”], 600mm [23.6”]
2000mm [78.7”], 600mm [23.6”], 750mm [29.6”]
Weight
Operating
Temperature
Range
DV2-EBC4-xxxx: 850kg [1870lb]. Typical maximum with 4 x 48V/150Ah battery strings.
-25°C [-13°F] to 40°C [104°F]
Altitude <2000m Thermally de-rates above this altitude, to a maximum altitude of 4000m
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2010 Eaton Corporation
All Rights Reserved
DV2-3G EBCUL A
Eaton DC Power Solutions
DV2 - 3G Core Power Solutions
North American Models
48V integrated systems up to 750kW
The Eaton ® Data-Voice-Video
Core Power Solutions range of
DC power systems are designed for telecommunications network applications requiring high powered, efficient and flexible
DC power supplies.
These DC power systems use
Eaton CR48-3G rectifier modules and include an integral AC and
DC distribution with flexible combinations of fuses and
MCBs, and an SC200 system controller. Low voltage disconnect (LVD) options are also available. DC distribution cabinets can be connected in parallel where additional distribution space is required.
Maximum rectifier capacity is
92.8kW, with additional cabinet(s) required for greater capacity. Systems up to 15,000A can be configured using external busbars.
charge, battery current limit, automatic equalize charging and automatic battery condition monitoring.
Typical applications are providing
48V standby power for centralized architecture such as local and central office switches and other large switch installations, wireless switching centers, long-distance transmission systems and data centers.
Eaton DV2 Core Power Solutions are pre-configured for fast installation and set-up. All system settings are fully adjustable in software and stored in transferable configuration files for repeatable one-step system set-up.
Typical Applications
• Wireless MSC sites
(CDMA/GSM/3G UMTS)
• Local and central office switching
Intelligent system management features include battery temperature compensation, fast
• Point of presence (POP) sites
• Data centers
Features
• Intelligent system management features
• Pre-configured software
• High power density
• Fast on-line expansion of rectifiers (hot-swap)
• High efficiency and unity power factor
• Range of DC distribution configurations
• Battery condition monitoring
• Wide AC input voltage range
• Seismic rated cabinet
• Remote monitoring and control
• Full length security door (optional)
Technical Specification
Input
Nominal AC
Supply
3P+PE, Δ 208Vac
3P+N+PE, Y 230/400Vac, 277/480Vac
50/60Hz
Power Factor >0.99* (20 – 100% Maximum System Current)
Efficiency up to 92%*
Output
DC Output
Voltage Range
Typical DC
Output Power
40 – 58V
46kW - 750kW †
Environmental
Operating
Temperature
Range
-25°C to +40°C
Mechanical
Dimensions
H,W,D
2200mm [86”], 600mm [23.6”], 600mm [23.6”]
Typical configuration with 16 CR48-3G rectifier modules.
System
System
Controller
SC200
* Refer to rectifier data sheet for full details
† Up to 92.8kW in a single cabinet
Options
AC Distribution Rectifier MCBs
DC Distribution
DCM2000 – bullet breakers up to 250A per circuit.
DCB1000 – high current circuit breakers up to
600A per circuit.
DCF0208 – 2U fuse panel, 2xTPL fuses up to
800A each.
Low Voltage
Disconnect
(LVD)
Rectifier Blank
Panels
DCF0408 – 4U fuse panel, 4xTPL fuses up to 800A each.
Single or dual LVD can be configured as battery or load disconnect including non-priority load disconnect.
For unused rectifier positions equipment
Software
Power Xpert Remote control and monitoring software www.powerware.com/downloads
Certifications
All products comply with International Standards. Contact your local
Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
Australia /
New Zealand
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellWatch, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation
All Rights Reserved
DV2CoreNA C
Eaton DC Power Solutions
Matrix™ 2000 Standalone Inverter
Features
• Designed for telecom applications
• Pure sine wave output
• Unity power factor (full 2000 watt output power)
• Significant overload capability, 120% continuously, 200% for 5 seconds
• High efficiency, >91%
• High power density
• Built in Static Transfer Switch (STS)
• DSP design for improved reliability and performance
• Single phase 120Vac or 230Vac output options
• Comprehensive LCD/LED with keypad
• USB interface for connecting to PC
• Wide selection of configurable parameters.
• International certifications
The Eaton® Matrix™ 2000
Standalone Inverter is designed
The Matrix 2000 solution uses digital microprocessor control to for use in telecommunications applications where a very reliable AC supply is required.
The high efficiency and compact size makes the Matrix 2000
Inverter an outstanding solution for powering all types of critical
AC equipment. provide maximum performance under all operating conditions.
The built-in controller gives realtime system status through comprehensive LCD/LED displays, and allows program setting through a keypad panel.
The Matrix 2000 Standalone
Inverter provides 2000W of reliable AC power in a 1U x 19” rack mount package that includes a built-in Static Transfer
Switch (STS). The STS
The Matrix 2000 Standalone
Inverter includes a built in USB interface for monitoring and control. automatically and instantaneously switches the AC output, from the DC inverter to an alternative source such as AC mains (and back again), providing extra security of the AC supply to the load equipment.
Technical Specification
DC Input
Operating Range 48V: 40Vdc ~ 60Vdc
AC Input (to Transfer Switch)
Voltage Range: INV-4820SA: 89Vac to 138Vac
(50/60Hz) INV-4820ESA: 176Vac to 276Vac
Transfer Time <10ms
AC Output
Power Output 2000VA / 2000W
Wave Form Pure sine wave
Power Factor 1.0
Nominal Output
Voltage
(selectable)
Output
Frequency
Efficiency
Over Load
Protection
INV-4820SA: 110/115/120Vac
INV-4820ESA: 208/220/230/240Vac
50,60Hz
>91% at rated load
2*Inom, 5sec max
1.5*Inom, 10sec max
1.25*Inom, temperature controlled
Environmental
Requirements
Operating
Temperature
Range
-20°C to 60°C (-4°F to 140°F)
-20°C to 50 °C (-4°F to 122°F), full performance
Certifications
All products comply with international standards.
Safety
EN60950-1 / UL60950-1
Europe CE
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, Matrix, CellSure, SiteSure, DCTools and PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
MTX2000 B
Eaton DC Power Solutions
DCTools™ Configuration Software
Eaton ® DCTools is the new configuration software for field technicians installing and maintaining Eaton DC power systems. It is supplied at no charge by download from the
Internet and simplifies the setup and operation of all Eaton DC power systems.
DCTools is the ideal setup and diagnostic tool for field technicians. It provides a very easy way for them to configure an Eaton DC product, and view status and alarm conditions.
Frontline staff will find DCTools is a major benefit during the installation, troubleshooting and support of any Eaton DC power system, CellWatch battery monitoring systems and
SiteSure ancillary monitoring and control systems.
Among the advantages of using
DCTools are reduced installation times, lower fault response times, less need to visit sites and better access to operating data for fault analysis and operating conditions such as load growth.
These make the processes of power system installation and operation more efficient with the potential for real operating cost savings.
For added flexibility DCTools can connect to an Eaton DC power system in three ways; directly through an RS232 serial connection; through a dialup or cellular modem, or through an
Ethernet LAN/WAN.
DCTools is available for download at www.powerware.com/downloads
Features
• DC power system configuration software
• Windows ® compatible
• Easy to use graphical display
• Operates with all Eaton DC power systems, CellWatch™ and
SiteSure™
• Local (RS232 serial) or remote (dialup modem or Ethernet) connection
• Downloadable from the Internet at no charge
Technical Specification
Computer
Minimum
Requirements
Operating
System
RAM
Windows 98, Windows NT 4.0 or later
16Mb Ram Windows 98, 24Mb Windows NT
Internet connection
Required for download only
Interfaces
Communications RS232, Ethernet, or modem interfaces supported
Availability
Free download www.powerware.com/downloads
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellWatch, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
DCTool E
Eaton DC Power Solutions
EPR48-3G Rectifier Module
The Eaton ® EPR48-3G
Enterprise Power Rectifiers are
The EPR48-3G also has power factor correction and is up to designed specifically for enterprise applications such as
PoE and VoIP converged data
91% efficient, with optimum performance available at typical load currents. Together these networks, customer premises equipment and also telecommunications roadside cabinet installations. give the EPR48-3G some of the lowest running costs for any DC power system of its type available.
The EPR48-3G is a telecom network grade rectifier with
900W output. It is designed for operation at up to 70°C (158°F) and under a wide range of AC power conditions.
The EPR48-3G rectifier is microprocessor controlled and includes intelligent features such as automatic set up during installation, temperature dependant variable speed fans for lowest audible noise and automatic self protection over wide ranging environmental conditions.
The EPR48-3G rectifier module will provide years of costeffective, and trouble free service for your 48V enterprise access equipment.
Typical Applications:
• PoE equipment
• VoIP/IP converged data networks
• PABX for any business network
• Telecom roadside cabinets
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• High efficiency and unity power factor
• Universal AC supply input
• Wide output voltage ranges
• Constant power output
• Compliance with international standards
Technical Specification
91% (50 – 100% Output Current)
Input
AC Supply Nominal: 220/240V, 50/60Hz
Extended Operating Range: 90V – 275V
Power Factor >0.98 (50 – 100% Output Current)
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
48V: 43 – 57.5V
900W (240V AC nominal)
550W (120V AC nominal)
Environmental
Operating
Temperature
Range
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] reliability fans
Mechanical
Dimensions
H,W,D
Weight
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America UL, FCC Verification
Australia /
New Zealand
In the interests of continual product improvement all specifications are subject to change without notice. Performance ratings are valid with all other variables at Nominal. Specifications guaranteed over rated operating range.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
EPR48-3G D
Eaton DC Power Solutions
APR48-3G Rectifier Module
The Eaton ® APR48-3G Access
Power Rectifiers are designed specifically for network access applications such as cellular base stations, customer premises equipment and road-side cabinet installations.
The new generation 3G architecture is reliable, power dense and compact. The high power density allows as little as
1U of rack space to be occupied by power, therefore, maximizing space available for telco equipment.
The APR48-3G rectifier incorporates a combination of leading-edge high frequency switch mode technology for a flexible and efficient DC power source, with high reliability fan cooling which further contributes to its high overall reliability.
The APR48-3G is a high powered rectifier with 1800W output. It is designed for operation at up to 70°C (158°F) and under a wide range of AC power conditions.
APR48-3G perfectly suited to the wide variety of equipment and demanding environmental conditions found in network access applications.
The APR48-3G also has power factor correction and is up to
92% efficient, with optimum performance available at typical load currents. Together these give the APR48-3G some of the lowest running costs for any DC power system of its type available.
Operating with the Eaton SC100 or SC200 system con-troller, the
APR48-3G rectifier modules will provide years of cost-effective, and trouble free service for your
48V network access equipment.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• Industry leading power density
• High efficiency and unity power factor
• Wide AC supply conditions
• Wide output voltage ranges
• Constant power output
• Compliance with international standards
Technical Specification
92% (50 – 100% Output Current)
Input
AC Supply 220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
Power Factor >0.99 (50 – 100% Output Current)
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
48V: 43 – 57.5V
1800W 48V
Environmental
Operating
Temperature
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and
Range
Cooling below -10°C [14°F]
Temperature controlled, high reliability fans
Mechanical
Dimensions
H,W,D
Weight
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America UL, FCC Verification, CSA, IC
Australia /
New Zealand
In the interests of continual product improvement all specifications are subject to change without notice. Performance ratings are valid with all other variables at Nominal. Specifications guaranteed over rated operating range.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
APR48-3G F
Eaton DC Power Solutions
APR48-ES Energy Saver Rectifier
The Eaton ® APR48-ES Energy
Saver Rectifier is designed for communications network operators who are striving to cut energy costs across the network, and/or to meet aggressive carbon footprint reduction targets.
The high power density, short depth and flexible mounting options makes the Energy Saver
Rectifier well suited to limited space applications such as ETSI and road side cabinets.
The Energy Saver Rectifier is fully compatible with existing
Operating with well over 96% efficiency, it produces at least
50% less waste energy than most other modern rectifiers, and with potentially greater savings over older infrastructure.
Eaton 3G systems and it is one of the easiest rectifiers to use, with a simple plug-and-go insertion. It operates under a wide range of AC power conditions and in temperatures at up to 70°C (158°F).
The 2kW Energy Saver Rectifier is the ideal module size for powering access applications within a telecom network such as cellular base stations, ADSL equipment, and fibre nodes.
This rectifier features intelligent digital signal processing for enhanced control, producing peak efficiency in excess of
96% for typical operating loads, while also maintaining a very high minimum operating efficiency of 95 to 96%, over a very wide range of loads (from
30% to 100% of the 2kW capacity).
Features
• 2000W output power
• Energy saving efficiency greater than 96%
• Wide efficiency curve
• Industry leading power density
• Fast on-line expansion of rectifiers (hot-swap)
• Simple ‘plug and go’ insert
• Unity power factor
• Digital signal processing for enhanced control
• Wide AC supply conditions
• Wide output voltage range
• Constant power output
• Compliance with international standards
Technical Specification
Input
AC Supply
Power Factor
120V/208-240V, 50/60Hz (nominal)
185-275V full output power up to 50°C [122°F]
90-185V reduced output power
>0.99 (50 – 100% output current)
>95% (30 – 100% output power)
Output
DC Output Voltage
Range
DC Output
(maximum)
43 – 57.5V
2000W @ 48V
Environmental
Operating
Temperature Range -40°C – +70°C [-40°F – +158°F]
Output power derates above 50°C [122°F]
Cooling controlled, variable speed, high reliability fan <50dBA ambient temperature 25°C
Mechanical
Dimensions H,W,D 3U: 133mm [5.25”], 42mm [1.65”],
Weight
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America UL, FCC Verification, CSA, IC
In the interests of continual product improvement all specifications are subject to change without notice. Performance ratings are valid with all other variables at Nominal.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2010 Eaton Corporation
All Rights Reserved
APR48-ES D
Eaton DC Power Solutions
CR48-3G Rectifier Module
The Eaton ® CR48-3G Core
Network Rectifiers are designed specifically for core network applications such central office and data centres.
The new generation 3G architecture of the CR48-3G rectifier has improved space utilisation so rack space can be maximised for use with telco equipment and not power equipment.
The combination of industry leading power density and high frequency switch mode technology with high reliability fan cooling makes the CR48-3G a flexible, efficient, and very highly reliable DC power source.
The CR48-3G also has power factor correction and is up to
92% efficient, with optimum performance available at typical load currents. Together these give the CR48-3G some of the lowest running costs for any DC power system of its type available.
These features make the CR48-
3G ideally suited to central office and data center applications that require the highest level of performance and reliability from the DC power system.
Operating with the Eaton SC200 system controller, the CR48-3G rectifier modules will provide years of cost-effective, and trouble free service for your core
48V network equipment.
The CR48-3G is a very high powered rectifier with 5800W output, it is designed for operation at up to 70°C (158°F) and under a wide range of AC power conditions.
Features
• Fast on-line expansion of rectifiers (hot-swap)
• Automatic set-up from system controller
• Intelligent microprocessor controlled
• Industry leading power density
• High efficiency and unity power factor
• 3Ø AC supply
• Wide AC supply conditions
• Wide output voltage ranges
• Constant power output
• Compliance with international standards
Technical Specification
92% (50 – 100% Output Current)
Input
AC Supply 220/240V, 50/60Hz (nominal)
175-275V full output power up to 50°C [122°F]
Power Factor >0.99 (50 – 100% Output Current)
Efficiency
Output
DC Output
Voltage Range
DC Output
(maximum)
48V: 43 – 57.5V
1800W 48V
Environmental
Operating
Temperature
-40°C – +70°C [-40°F – +158°F]
Output current is derated above 50°C [122°F] and
Range
Cooling below -10°C [14°F]
Temperature controlled, high reliability fans
Mechanical
Dimensions
H,W,D
Weight
3U: 133mm [5.25”], 42mm [1.65”],
266mm [10.45”] overall
1.7kg [3.7 lb]
Certifications
North America UL, FCC Verification, CSA, IC
Australia /
New Zealand
In the interests of continual product improvement all specifications are subject to change without notice. Performance ratings are valid with all other variables at Nominal. Specifications guaranteed over rated operating range.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
CR48-3G D
Eaton DC Power Solutions
The Eaton ® SC200 System
Controller is an advanced control and monitoring solution for Eaton
Enterprise, Access, Metro and
Core Power Solutions.
It provides a full suite of advanced communications options, including built-in Ethernet interface, Web server, and SNMP agent.
Alarm notifications may be by
SNMP traps, email, SMS, dial-out to PowerManagerII remote monitoring software, or relay contact closures.
application, ensuring fast and problem free installation. On-site changes are easily made from the front panel or with a Windows PC using DCTools configuration software.
The high-resolution color LCD display is easy to read and has an easy to use menu structure. All system values and alarms can be displayed, with easy keypad access to check or edit settings.
The SC200 works with separate system I/O boards for powerful and user-friendly interfacing. Easy, low cost I/O expansion is possible by adding additional I/O boards.
An intelligent “Smart Alarms” feature provides highly configurable control and alarms to automated site management and improve performance – e.g. disconnect loads during peak AC grid loading, run outdoor cabinets in low noise mode at night, manage cooling, or customise site alarms to network requirements.
24V & 48V power systems
Wireless cell sites & switches
Transmission terminals
Local & central office switching
The SC200 provides full generator control and fuel metering capability for off-grid, hybrid generator, battery, solar and wind applications.
External GSM or PSTN modem
Additional I/O boards for system expansion The SC200 is supplied preconfigured with a default configuration file, or factory customized for a particular
SiteSure-3G modules for site management
Ethernet interface built-in
SNMP agent V1, V2c, V3
Battery mid-point monitoring & discharge time remaining
Generator control & fuel metering
Alternative energy input metering
SMS & email alarm messages (with GSM modem)
Comprehensive system control functions
Complies with international standards
Setup via web, keypad or DCTools configuration software
Language options
Optional extra I/O boards or SiteSure-3G modules for expansion
Smart alarms
Modbus
Operation
Supply Voltage 18 to 60Vdc
Range
Operating Range Standard: -10 to +50°C [14 to 122 °F]
Extended: -25 to 70°C [-13 to 158 °F]
Input/Output
Standard
Analog inputs Current sensor (3), Bus voltage (1), Temperature
(2)
Digital inputs
LVD contactor
4 Internal (pre-defined), 6 external (user-defined)
2 with one IOBGP module outputs Up to 16 with additional IOBGP modules
Relay outputs 6 Voltage free, NO-C-NC, 0.1A @ 60VDC
Screwless terminal block, 0.5mm
conductors
2 - 2.0mm
2
Communications
Interfaces
Physical
Software
Ethernet, USB and RS232
IP, http, https (secure web), S3P, modbus, SMTP
Management software
(email)
DCTools configuration / local management software.
Power Xpert remote management software.
SNMP version V1, V2c or V3. Supports standard
Network Management System software including
HP OpenView Network Node Manager.
User Interface
Display
Keypad
Language
Options
Indicators
Back-lit color dot matrix LCD 160 x 128 pixel
Adjustable viewing angle
6 keys
English: Standard
Spanish, German and Chinese available on request.
Other language software upgrades by arrangement.
Power on, Critical/Major alarm, Minor alarm
Mechanical
Dimensions
H,W,D
Mounting
SC200: 133.5mm (3U), 44.5mm, 70mm
IOBGP: 106mm, 175mm, 18mm
SC200: rectifier slot or flush panel mount
Orientation: vertical or horizontal
IOBGP: panel mount
Datalogging
Event Log
Data Log
10,000 records
10,000 records
Options
Input/Output With IOBSS module (SiteSure-3G):
Analog inputs: 48
Digital inputs: 108
Digital outputs: 32
Modem communications
PSTN or GSM. Requires external modem.
Certifications
China MII
North America UL, FCC Verification, IC
Europe CE
Australia /
New Zealand
C-tick
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2011 Eaton Corporation. All Rights
Reserved. SC200 K
Eaton DC Power Solutions
SiteSure-3G™
The Eaton ® SiteSure-3G adds on to the SC200 Controller to provide control and monitoring of a wide range of external devices. It uses the communications capability of an Eaton DC power system to monitor and control security, air conditioning, engine alternators and other building services, or sense DC currents for load metering.
SiteSure-3G modules can be remotely controlled and configured using the Power
Xpert remote control and monitoring software or with
DCTools local craft terminal.
SiteSure-3G is also compatible with Network Management
Systems using SNMP.
Additional SiteSure-3G modules can be added as required to provide the number of inputs and outputs needed for a particular application.
Features
• Remote control and monitoring
• Expandable
• Modular
• Real time data collection
• Compliance with international standards
Technical Specification
Operation
Supply Voltage 19 to 60V
Range
Rated Operating -10°C to +80°C [+14°F to +176°F]
Range
Input/Output
Bus voltage input
Number:
Range:
Current inputs Number:
Temperature inputs
1
-60V to +60V
3
Range:
Number:
Range:
2
2.53V to 3.23V
(-20°C to +70°C with TS02 temperature sensor)
Digital inputs Number:
General Number: purpose analog inputs
Range:
Digital Outputs
(Relays)
Number:
Type:
10
4
0V to +10V
6
Voltage free, NO-C-NC
0.3A @ 60VDC / 1A @ 30VDC
Certifications
All products comply with international standards. Contact your local
Eaton DC representative for details on the specific product versions available with these safety and EMC approvals:
North America UL, FCC Verification, IC
Australia /
New Zealand
C-tick
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
Power Xpert are trade names, trademarks, and/or service marks of Eaton Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
SiteSure-3G C
Eaton DC Power Solutions
3G DC Distribution Module
- DCD1M Series
Features
• 1U High
• 19” rack mounting
• Battery & load circuits
• Easy to fit push-in circuit breakers
• Optional low voltage disconnect
• Integrated current sensor
• Cabinet or relay rack mounting
The Eaton 3G DCD1M Series of
DC Distribution Module is a 1U high, 19” rack mount 48V DC distribution module, an ideal solution for converged data networks and low power telecommunications applications requiring compact, efficient and
This module features front access, easy to fit, push-in circuit breakers for ease of installation and servicing in the field. flexible DC power supplies.
The DCD1M series is available with up to two battery circuits and 10 individual load circuits. It may be used with either the
Eaton 3G series of secure DC power systems or as
‘standalone’ for use with 3rd party equipment.
The high interrupt rating of the battery circuit breakers make the
DCD1M series suitable for use as a primary protection module with a wide range of batteries.
The DCD1M is available with an optional low voltage disconnect contactor to prevent over discharging of backup batteries, an onboard current sensor and
MCB trip detection monitoring for use with the Eaton 3G series of secure DC power systems.
Typical applications include providing DC distribution for customer premises equipment, roadside cabinets, converged
VoIP/data networks, IP routers and small PABX’s.
Technical Specification
DC Voltage Range 48V (nominal)
DC Power
(maximum)
Efficiency
43V - 58V
4080W (85A @ 48V)
92% (50 – 100% Output Current) †
Output
DC Output Voltage
Range
DC Distribution
Circuits
20V – 58V
12-way circuit breakers (2 x Battery, 10 x Load)
Circuit breaker type: magnetic/hydraulic, push fit type
Battery circuit breakers:
Heinemann AC1R Series
Typical ranges available: 40A, 50A, 60A
Interrupt rating: 5000A
Load circuit breakers:
DC Circuit
Connections
Heinemann JC1S Series
Typical ranges available: 5A, 10A, 20A, 30A(max)
Load: 10way terminal barrier strips
(screw terminals, max 10AWG/4mm
2 cable)
Battery: Anderson Powerpole‚ PP45
(max 10AWG/4mm
2 cable)
Polarity /Grounding Positive ground or floating (in-field selectable)
Operating -10°C to +50°C [14°F to +122°F]
Temperature Range
Dimensions H,W,D 1U , 19” mounting*, 11” [280mm]**
* Optional 23” mounting brackets available
** Additional access space is required see installation guide for details.
Weight DCD1M-00 4.1kg [9.1lb]
DCD1M-01 4.4kg [9.8lb]
System Controller Compatible with SC200 & SC100 based systems
(when LVD included, onboard current sensor and
MCB trip detection features required)
Optional
Low Voltage
Disconnect (LVD)
Battery disconnect: 100A internal contactor
Load Circuit Cable
Battery Input
Connection Cable
23” rack mounting
CKLOAD-00 10sets, 1500mm long, 10AWG/4mm
2
CKBATT-00 2000mm long, for connection to
Powerware EBM module
CKBATT-01 2000mm long, for connection to generic battery brackets
Rectifier Blank
Panels
621-04998-29 23” mounting bracket (2 required)
For unused rectifier positions
Part Numbers
DCD1M-00
DCD1M-01
1U, 19” rack mount DCD distribution module.
1U, 19” rack mount DCD distribution module. c/w low voltage disconnect and onboard current sensor
Certifications
All products comply with international standards.
North America UL (Canada, USA)
Europe CE
In the interests of continual product improvement all specifications are subject to change without notice.
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
DCD1 B
Eaton DC Power Solutions
DCM2000 - DC Distribution Module
The DCM2000 DC distribution provides circuit protection for a wide selection of telecommunications loads up
250A per circuit and 800A per distribution. All circuit breakers are alarmed through aux contacts providing volts free alarm signals. The DCM2000 is designed to comply with recognized international standards and for complete operator safety. Full front access is provided to allow easy termination of load cables in either vertical or horizontal cable entry.
Features
• 4U Module
• Up to 20 bullet terminal breakers
• Selection of MCB ratings to 250A
• Tool access front cover
• Front access for cable termination
• Circuit breaker trip alarms
• Compliance with international standards
Technical Specification
Brief Technical Specifications
Voltage Range 20 – 58Vdc
Maximum
Current
800A @ 50°C [122°F], (CE)
600A @ 40°C [104°F], (UL)
CB Type
CB Current
Ratings
(Other ratings available on request)
Heinemann AM1R or AMA1P
Single Pole: 10A, 20A, 30A, 40A, 50A, 60A, 70A, 80A,
100ª
Multi Position: 150A (2P), 200A (2P) , 250A (3P)
Two hole lug, vertical or horizontal cable entry Load Cable
Termination
Alarms
Operating
Temperature
Range
Dimensions
H,W,D
Certifications
MCB Aux contacts.
-10°C — +50°C [+14°F — +122°F] (CE)
-10°C — +40°C [+14°F — +104°F] (UL)
4U: 177mm [12.25”], 480mm [19” mounting], 300mm
[12”]
Europe: CE
North America: UL60950 pending
UL1801 pending
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
DCM2000 B
Eaton DC Power Solutions
DCB1000
MCCB Distribution Module
The DCB1000 DC distribution provides circuit protection for a wide selection of telecommunications loads up to
1200A per distribution. All
MCCBs are alarmed with automatic detection of load current to prevent false alarms from unused circuits. The
DCB1000 is designed to comply with recognized international standards and for complete operator safety. Full front access is provided to allow easy termination of load cable.
Features
• 7U module
• Up to 10, 250A circuit breakers
• Selection of MCCB ratings to 400A
• Tool access front cover
• Front access for cable termination
• MCCB alarms with load detection
• Compliance with international standards
Technical Specification
Brief Technical Specifications
Voltage Range 20 – 70Vdc
Maximum Current 1200A @ 50°C [122°F]
MCCB Type
MCCB Current
Ratings
Heinemann GJ1 or Airpax JLM
Single Pole: 100A, 125A, 150A, 175A, 200A,
225A, 250A
Multi Pole: 275A, 300A, 350A, 400A, 450A, 500A,
550A, 600A, 700A, 800A, 900A, 1000A, 1100A,
1200A.
Load Cable
Termination
Load termination is direct onto MCCB. Specify requirements when ordering MCCB’s.
Operating
Temperature
Range
Dimensions
H,W,D
Certifications
-10°C — +50°C [+14°F — +122°F]
7U: 177mm [12.25”], 480mm [19” mounting],
300mm [12”]
North America: UL60950 pending
UL1801 pending
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
DCB1000 A
Eaton DC Power Solutions
DCF0208 and DCF0408
Fuse Distributions Modules
The DCF0208 and DCF0408 DC fuse distributions provide circuit protection for a wide selection of telecommunications loads requiring up to 800A fuse protection. All Fuses are alarmed and provide volts free alarm contacts through shunt trip circuit breakers. The DCF0208 and DCF0408 are designed to comply with recognized international standards and for complete operator safety.
Features
• 19” rack mount
• 2U or 4U module
• 2 or 4 telpower fuse holders
• Selection of fuse ratings up to 800A
• Volts free fuse fail alarms
• Compliance with international standards
Technical Specification
Brief Technical Specifications
Voltage Range 20 – 70Vdc
Maximum
Current
640A @ 40°C [102°F] per fuse
Fuse Type
Fuse Current
Ratings
Load Cable
Termination
Alarms
Operating
Temperature
Range
Dimensions
H,W,D
Bussmann TPL
250A, 300A, 350A, 400A, 450A, 500A, 600A, 700A,
800A
Two hole lugs onto output busbar
Voltage free contacts
-10°C — +40°C [+14°F — +104°F] (UL)
Certifications
2U: 88mm [3.5”], 480mm [19” mounting], 200mm [8”]
4U: 177mm [7.0”], 480mm [19” mounting], 200mm
[8”]
Europe: CE
North America: UL60950 pending
UL1801 pending
Internet: www.eaton.com/dcpower
Email: [email protected]
Eaton, CellSure, SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2009 Eaton Corporation
All Rights Reserved
DCF0208/0408 A
Eaton, Matrix, CellSure,
SiteSure, DCTools and
PowerManager are trade names, trademarks, and/or service marks of Eaton
Corporation or its subsidiaries and affiliates. All other trademarks are property of their respective owners.
© 2012 Eaton Corporation.
All Rights reserved.
July 2012
Eaton Corporation
Telecommunications Power Solutions Business [email protected] www.eaton.com/telecompower
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement