ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Table of Contents
Safety precautions ..................... 3
Overview of the phone .............. 5
Display symbols (selection) ....... 7
Getting started ........................... 8
Insert SIM card/battery ............. 8
Charge battery ......................... 9
Switch on/off, PIN entry ........... 10
Copy SIM addresses ................ 10
Standby mode ........................ 10
General instructions ................. 11
See also In- User guide ............................. 11
dex at the
Menu controls ........................ 11
end of this
Menu speed dialling ............... 12
User Guide
Codes .................................... 12
Preventing accidental
activation ............................... 13
SIM services ........................... 14
Calling ...................................... 15
Dialling with number keys ...... 15
End call .................................. 15
Set volume ............................. 15
Redial previous numbers ........ 15
If the number is busy .............. 16
Accept call ............................. 16
Reject call .............................. 16
Swapping calls ....................... 17
Multiparty .............................. 18
Call menu .............................. 19
Control codes (DTMF) ............. 19
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60IVZ.fm
Table of
Contents
1
Text entry .................................20
Text entry without T9 .............20
Text entry with T9 ..................21
Predefined text .......................23
Contacts ....................................24
Enter new contacts .................24
Change entry ..........................25
Call .........................................25
Contacts menu .......................25
SIM entries .............................26
Group .....................................27
Records .....................................28
Missed calls ............................28
Calls received .........................28
Calls dialled ............................28
Time/Charge .............................29
Display ...................................29
Charge settings ......................29
Camera .....................................30
Take photos ............................30
My photos ..............................31
Settings ..................................32
Video .....................................33
My videos ...............................34
Surf & Fun .................................35
Downloads ................................38
SMS ...........................................39
Writing and sending
text messages (SMS) ...............39
Read new SMS ........................41
Lists .......................................41
SMS setup ..............................43
See also Index at the end of this User Guide
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
2
Table of Contents
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60IVZ.fm
MMS ......................................... 44
Writing/sending
MMS messages ...................... 44
Receive MMS .......................... 45
Lists ....................................... 45
MMS setup ............................. 46
E-mail ....................................... 48
Write new e-mail .................... 48
Receive/read e-mail ................ 48
E-mail setup ........................... 49
See also In- Voice msg./mailbox .................. 51
dex at the Cell broadcast .......................... 52
end of this Settings .................................... 53
User Guide
Audio settings ........................ 53
Device .................................... 54
During calls ............................ 56
Security ................................. 56
Network ................................. 57
Connectivity ........................... 58
Divert ....................................... 60
Barrings .................................... 62
Closed user group .................... 63
Fast access key ......................... 64
Left soft key ........................... 64
Extras ....................................... 65
General.................................. 65
Organiser ............................... 65
Clock ..................................... 67
Calculation ............................. 68
Voice control .......................... 69
Customer Care ..........................72
Questions & Answers ................74
Care and maintenance .............77
Product data .............................78
Accessories ...............................79
Battery quality statement ........80
Guarantee certificate (UK) .......81
Guarantee certificate (IRL) .......82
SAR - European Union (RTTE) ...83
SAR - International (ICNIRP) ......85
Index .........................................86
See also Index at the end of this User Guide
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Safety precautions
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_Security.fm
Safety precautions
3
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with legal
requirements and local restrictions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while
driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more information consult your doctor.
The SIM card and
MultiMediaCard may be
removed. Caution! Small parts
like this could be swallowed by
young children.
The mains voltage specified on
the power supply unit (Volt)
must not be exceeded. Otherwise the charging device may
be destroyed.
The ringtone (p. 53), info tones
and handsfree talking are reproduced through the loudspeaker.
Do not hold the phone to your
ear when it rings or when you
have switched on the handsfree
function. Otherwise you risk
serious permanent damage to
your hearing.
Only use original Siemens batteries (100 % mercury-free) and
charging devices. Otherwise
you risk serious damage to
health and property. The battery
could explode, for instance.
You may only open the phone to
replace the battery (100 % mercury-free), SIM card or
MultiMediaCard. You must not
open the battery under any
circumstances. All other
changes to this device are
strictly prohibited and will invalidate the operating licence.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
4
Safety precautions
Important:
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_Security.fm
Please dispose of unwanted
batteries and phones as permitted by the laws in your country.
The phone may cause interference in the vicinity of TV sets,
radios and PCs.
Use only Siemens original
accessories. This will avoid
potential risks to health or property and ensure compliance with
all relevant regulations.
Improper use will invalidate the guarantee!
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Overview of the phone
5
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_overview.fm
Overview of 1 Integrated antenna
the phone Do not interfere with the phone above the
battery cover unnecessarily. This reduces
the signal quality.
2 Loudspeaker
3 Display
4 Joystick
In standby mode:
G
G
H
F
Hold down – voice control.
Press briefly – voice menu.
Open contacts.
Function as for soft keys.
C
Open menu.
In lists and menus:
I
Scroll up/down.
D Back a menu level.
E/ C Select function.
During a call:
G
Increase volume.
Reduce volume.
H
D Function as for left soft key.
E/ C Select call menu.
5 Microphone
6 Plug socket
For charger, headset etc.
Note
Your phone's display and the camera lens on the back of the phone are delivered with a
protective film.
Remove this film before getting started.
In rare cases static discharge may cause discoloration at the edges of the display. However
this will disappear within 10 minutes.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Overview of the phone
6
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_overview.fm
1 Soft keys
The current functions of these keys are
shown in the bottom line of the display as
§text§/symbol.
2 B Call key
Dial phone number/name displayed, take
calls. Show last phone numbers dialled in
standby mode.
3 A On/Off/End key
• Switched off: hold down to switch on.
• During a conversation or in an application:
press briefly to finish.
• In menus: press briefly to go back a level.
Hold down to go back to standby mode.
• In standby mode: hold down to switch off
phone.
4 Input keys
Numbers, letters.
*
5
Hold down
• In standby mode: switch all signal tones
on/off (except alarm).
• During call: switch mute on/off.
6
#
Hold down
In standby mode: switch key lock on/off.
Activating the keypad lock also avoids connecting to the Internet unintentionally by
double clicking on the joystick.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Display symbols (selection)
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_displaysymbols.fm
Display sym- Menu symbols
bols (selecContacts
tion)
Ringtone only if the caller is
stored in contacts or as a group
member.
Alarm clock activated.
Call register
Keypad locked.
Phone numbers/names:
SIM services
or
Audio settings
On the SIM card.
On the SIM card
(PIN2 protected).
Contacts (in phone).
Messages
Text input with T9.
Camera
Registered.
Internet online.
Internet
Explorer
Extras
Settings
Headset active.
Auto answer feature on.
Soft keys
Message received.
Voice message received.
MMS received: logo.
MMS received: ringtone.
Display symbols
7
MMS received: caller ID.
Signal strength.
Missed call.
Battery charging status,
e.g., 100 %.
Missed appointment.
All calls are diverted.
Missed alarm.
Ringtone off.
Open contacts.
Message memory full.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Getting started
8
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
Getting
started
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit-card size, snap the
smaller segment out and remove
any rough edges.
• Push the catch in the direction of
the arrow 1.
3
• Insert the lugs into the openings
4, then press the battery onto
the phone until it clicks into position.
4
1
• Remove the cover with the integrated battery 2.
2
• Insert the SIM card in the opening
with the contact area facing downwards and push gently until it
engages below the holder (make
sure the angled corner is in the
correct position) 3.
Additional information
Please switch off your phone before
removing the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have an
older card.
SIM card problems ............................p. 74
Functions without SIM
Emergency number (SOS)
§SOS§
Press the soft key to make an
emergency call on the network
without a SIM card and without
entering a PIN (not available in
all countries). Only to be used
in real emergencies!
§Menu§
Press soft key. The functions are
displayed.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Getting started
Charge battery
Charge icon not visible
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone 1,
plug the charger cable into a mains
power socket and charge for at least
2.5 hours.
1
9
2
2
To remove, push the buttons on the
side of the connector in the direction
of the arrows 2.
Charging time
An empty battery is fully charged
after about 2.5 hours. Charging is
only possible within a temperature
range of +5 °C to +40 °C. The mains
voltage specified on the power supply unit must not be exceeded.
If the battery has been discharged
fully the charge icon is not immediately visible when the charger is
plugged in. It will appear after up to
2 hours. In this case the battery is
fully charged after 3-4 hours.
Please only use the power supply unit
provided!
Display while in service
Charge level display during operation (empty – full):
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly
after an uninterrupted charging/discharging cycle. You should therefore
not remove the battery unnecessarily
and where possible not finish the loading process early.
Additional information
The charger heats up when used for long
periods. This is normal and not dangerous.
Operating time
A full battery will deliver up to
140 hours of standby time or
270 minutes of talktime (p. 78).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Switch on/off, PIN entry
10
Switch on/
off, PIN entry
Switch on/off
Copy SIM addresses
A
You can copy entries from the SIM
card into the phone (contacts).
Please do not interrupt this procedure.
During this time do not accept incoming calls. Follow instructions in the
display.
Hold down On/Off/End key
to switch on or off.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
Enter PIN
The SIM card can be protected with a
4 to 8-digit PIN.
J
§OK§
Enter the PIN using the
number keys. The characters **** appear to ensure
nobody can read your PIN
on the display. Correct
errors with §Clear§.
Confirm entry with right
soft key. Logging on to the
network will take a few
seconds.
You can also copy data from the SIM
card at a later time: Copy all function
(options menu for SIM entries,
p. 26).
Standby mode
When the name of the service provider appears on the display, the
phone is in standby mode and ready for
use.
Additional information
Change PIN ...................................... p. 13
Other network (roaming) ................... p. 57
Clear SIM card barring ...................... p. 13
Signal strength
Strong receive signal.
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
The right soft key may have different
functions pre-assigned (p. 64).
A
Hold down the On/Off/End
key to return to standby
mode from any situation.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
General instructions
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
General
instructions
User guide
The following symbols are used to
explain operation:
J
A
B
<>
C
DFE
H I G
11
This corresponds to:
C
Enter numbers or letters.
From standby mode click
on the joystick to open the
menu.
On/Off/End key
Call key
Soft keys
Press the joystick, e.g., to
call up the menu.
Press the joystick in the
direction indicated.
§Select§
Displays a soft-key function.
L
Function depends on the
service provider, special
registration may be necessary.
Menu controls
The steps needed to reach a function
are shown in a condensed form in this
user guide, e.g. to call up messages
and from there call up SMS:
CMMessagesMSMS
D
C
Use the joystick to select
the menu item "Messages"
and confirm by clicking on
the joystick.
A further click on the joystick selects "New SMS".
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
General instructions
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
12
Menu speed dialling
Codes
All menu functions are numbered
internally. A function may be
selected directly by entering these
numbers in sequence.
The phone and SIM card are protected against misuse by several
security codes.
E.g., write new SMS (from standby
mode):
C
4
1
1
Press for menu view.
Keep these confidential numbers in
a safe place where you can access
them again if required.
PIN
Protects your SIM card
(personal identification
number).
PIN2
For setting the charge detail
display and to access additional
functions on special SIM cards.
PUK
PUK2
Key code for unlocking SIM
cards after the wrong PIN has
been entered repeatedly.
Phone
code
Protects your phone. Must be
entered at the first security setting.
for Messages
for SMS
for New SMS
CMSettingsMSecurityMCodes
MSelect function.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not permit deactivating the control.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
General instructions
13
§Edit§
Press.
J
Clear SIM card barring
Enter PIN.
§OK§
Confirm input.
§Edit§
Press.
§OK§
Confirm.
Change PIN
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
You can change the PIN to any 4 to
8-digit number you find easier to
remember.
Additional information
Keylock..............................................p. 55
Further security settings ....................p. 56
J
Enter current PIN.
§OK§
Press.
J , §OK§
J , §OK§
Enter new PIN.
Preventing accidental
activation
Even if PIN entry is deactivated, confirmation is required to switch on the
phone.
Repeat new PIN.
Change PIN2
(Display only if PIN2 is available).
Proceed as with Change PIN.
Chg. phonecode
L
The phone is supplied without a
phone code. You must therefore
determine this code the first time
you call up a function that requires
a phonecode (e.g. This SIM only,
p. 57).
Following the third incorrect attempt,
access to the phone code and the
functions that use it is denied. If this
happens please contact Siemens
Service (p. 72).
This prevents the phone from being
switched on accidentally, e. g.,
when carried in a pocket or whilst
you are on an aircraft.
A
Hold down.
§OK§
Press. The phone switches
on.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
14
SIM services
General instructions
L
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_startup.fm
(optional)
Your service provider may offer
special applications such as mobile
banking, share prices, etc. via the
SIM card. To do this you need an
appropriate SIM card. Where there
are several applications, these are
displayed in a SIM services menu.
With the SIM services menu, your
phone is ready to support future
additions in your service provider's
user package. For further information, please contact your service provider.
If your SIM card does not offer this
function, this menu item will be
replaced by the menu item "Audio
Settings" which will give you direct
access to all the audio settings for
your phone (p. 53).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Calling
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phone.fm
J
Enter the number (always
with prefix, if necessary
with the international dialling code).
§Clear§
A short press clears the last
digit, a long press clears the
entire number.
B
Press call key. The displayed phone number is
dialled.
Additional information
§Save§ Save phone number in contacts/
to SIM card............................... p. 24/p. 26
§Menu§ Call menu............................. p. 19
Microphone off .................................. p. 19
Auto key lock..................................... p. 55
Control codes (DTMF) ...................... p. 19
Voice dialling..................................... p. 69
International dialling codes
In standby mode:
Press down until a "+" is
displayed.
§+List§
Press and select country.
0
Phone number memo
You can use the keypad to enter a phone
number during a conversation. The person
to whom you are speaking can hear these
entries. When the connection has ended
you can save or dial the phone number.
15
End call
A
Press the End key briefly.
The call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
Set volume
I
Use the joystick (top/bottom) to adjust the volume
(only possible during conversation).
Redial previous numbers
To redial the phone number last
called:
B
Press Call key twice.
To redial other numbers that were
dialled previously:
B
I
B
Press the Call key once.
Pick out the required
phone number from the
list, then press...
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Calling
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phone.fm
16
If the number is busy
Accept call
If the called number is busy or cannot be reached because of network
problems several options are available (depending on the service provider). An incoming call or any other
use of the phone interrupts these
functions.
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
Either
Auto redial
§Auto§
Press. The phone number
is automatically dialled
ten times at increasing
time intervals. End with:
A End key.
Or
Reminder
§Prompt§
Press. A beep reminds
you to redial the displayed
phone number after
15 minutes.
§Answer§ Press.
Or
B
Press.
If the phone number has been transmitted by the network, it is displayed. If the name is in contacts the
relevant name appears instead.
Warning!
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones!
Additional information
Missed calls.......................................p. 28
Accept call using any key ..................p. 56
Switch off ringtone.............................p. 53
Reject call
§Reject§
Press. The call will be
diverted if this has been
set previously (p. 60).
Or
A
Press briefly.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Calling
Swapping calls
L
Establish a second connection
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phone.fm
You can call another number during
a call.
§Hold§
The current call is put on
hold.
J
B
Now dial the new phone
number.
(Swap)
Swap back and forth
between the calls.
Press. The number is
dialled.
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. You have the following
options:
Accept the waiting call in addition to the
first.
Accept the waiting call,
putting the current call on
hold to do so. Always proceed as above to swap
between the two calls.
B
Reject the waiting call
§Reject§ Reject the waiting call.
End current call
Accept the waiting call and end the
current call
End the current call.
A
End the current call.
§Answer§ Accept the new call.
§Return§
You are now connected to
the caller.
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly.
17
A
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phone.fm
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
18
Calling
Multiparty
L
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your service provider or may have to be enabled specially. Once you have established a connection:
§Hold§
/
J
§Menu§
The current call is put on
hold.
Now dial a new number.
When the new connection
is established ...
... open menu and select
Multiparty. The held calls
are joined for the multiparty conversation.
Multiparty menu
§Menu§
Open menu
Join all
All held calls are joined for
the multiparty conversation.
Hold all
All active calls are held.
Transfer The original call is joined to
the second one. For you,
both calls are now ended.
End all
All active calls are ended.
End
A
All calls in the conference
finish simultaneously
when the End key is
pressed.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Calling
Call menu
Control codes (DTMF)
The following functions are only
available during a call:
Send control code
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists.
These entries are transmitted
directly as DTMF codes (control
codes).
§Menu§
Open menu.
Voice memo
Starts the voice recording.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phone.fm
19
Mute
Switch microphone on/off.
If switched off, the person
on the other end of the
line cannot hear you (muting).
Loudspeaker
Activate/deactivate.
Volume
Adjust volume during a
call.
Multiparty See Conference menu
above.
Contacts Opens contacts to select a
phone number.
Messages An SMS can be sent
(p. 39).
J
B
Enter DTMF control code.
Send.
Store in contacts
Store phone numbers and control
codes (DTMF codes) in the same
way as a normal entry.
J
0
Enter phone number.
J
0
Enter DTMF codes (numbers).
J
Enter a name.
§Save§
Press.
Press until a “+” appears in
the display (wait for the
connection to be established).
If necessary, wait again for
3 seconds at a time for the
receiver to process the
entries safely.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
20
Text entry
Text entry
Text entry without T9
Press number key repeatedly until
the required letter appears. After a
brief interval the cursor will advance.
Example:
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_text.fm
2
Press briefly once for a,
twice for b etc. The first letter of a name is automatically written in upper case.
Hold down once to write the
number assigned to the
key.
Correct a word
F
§Clear§
Deletes the character to
the left of the cursor.
J
Characters are inserted at
the cursor position.
Special characters
*
Hold down (T9 switched
off). The symbols chart is
displayed:
FI
Navigate to the required
symbol.
§Select§
Press or confirm choice by
clicking on the joystick.
Ä, ä, 1–9 Umlauts and numbers are
displayed after the relevant letters.
§Clear§
Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
1
Press briefly once for a
space.
FI
Use the joystick to guide
the cursor (forwards/back
and up/down).
*
Press briefly: Swap
between Abc, abc, ABC,
123. Status shown in top
line of display.
Move character by character to the left/right.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Text entry
Text entry with T9
Write a word using T9
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive dictionary.
Since the display changes as you proceed, it is best if you finish a word
without looking at the display.
T9 menu
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_text.fm
21
CMSettingsMDeviceMT9 input
Select input language
Select the language in which you
want to compose your message.
T9 input language
Select.
§Select§
Confirm, the new language is set.
Set T9 as standard
The T9 system is set as standard for
text entry.
Simply press the keys beneath which
the relevant letter is located once
only. For "hotel", for example:
4 6 8 3 5
1
Do not use special characters such as
Ä. Use the standard characters
instead, e.g. A; T9 will do the rest for
you.
*
T9 preferred
Select.
Briefly activate, deactivate T9
or
#
#
Press briefly to activate/
deactivate T9.
again. A blank ends a
word.
Press briefly: swap between
T9Abc, T9abc, T9ABC, 123.
in the top line of the display.
Hold down: Select Entry
mode T9Abc, T9abc, T9ABC,
Abc, abc, ABC, 123 in the
window.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Text entry
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_text.fm
22
Special characters
T9 word suggestions
*
Hold down. The symbols
chart is displayed (p. 20).
FI
Navigate to the required
symbol.
§Select§
Press or confirm choice by
clicking on the joystick.
If several options are found in the
dictionary for a key sequence (a
word), the most probable is displayed first. If the word you want has
not been recognised, the next suggestion from T9 may be correct.
Additional information
Set a full stop. A word is concluded if it is followed by a
space. Within a word, a full
stop represents an apostrophe
or hyphen:
e.g. §provider.s§ = provider’s.
Go to the right: ends a word.
0
The word must be §highlighted§. Then
press
again. The displayed word
is replaced with a different
word. If this word is also
incorrect, press
again. Repeat until the correct word is displayed. If
the word is not in the dictionary, write it without T9
or add it to the dictionary.
To activate:
E
Correct a word
F
§Clear§
Move character by character to the left/right.
Deletes the character to
the left of the cursor.
(Spell)
Select.
The last suggestion is deleted and
the word may now be entered without T9 support. Press §Save§ to add it
automatically to the dictionary.
Additional information
Within a "T9 word", individual letters may
not be edited without first removing the T9
status. In most cases it is better to rewrite
the complete word.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Text entry
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_text.fm
T9® Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437,
5,953,541, 5,187,480, 5,945,928, and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
Predefined text
Text modules can be stored in the
phone for adding to your SMS messages.
Write text modules
CMMessagesMSMS
MPredefined text
§Edit§
J
Select <Empty> and save
with §OK§.
Write text module.
Use text modules
J
Write message.
§Options) Open the text menu.
H
H
Select text modules.
Select text module from
the list.
§Select§
Confirm. The text module
is displayed.
§Select§
Confirm. The text module
is inserted in the message
to the right of the cursor.
23
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Contacts
24
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phonebook.fm
Contacts
You can store up to 255 contacts in
the phone memory with several telephone and fax numbers and other
address details. These entries are
managed separately from the entries
on the SIM card. However, you can
exchange data between contacts
and the SIM card (p. 26).
Enter new contacts
CMContacts
New
Press.
J
J
Enter first and/or last
name.
(Save)
Store the entry.
Always enter phone
number with dialling code.
Make further entries field by field.
Open contacts:
CMContacts
You will see the entries on the SIM
card, the groups, and the list of contacts in the phone memory:
SIM entries
Select or edit phone numbers stored on the SIM card
(p. 26).
Group
Entries can be organised
by groups (p. 27).
The list of contacts in the phone
memory follows next. If you have
not created any entries yet, then just
SIM entries and Group are displayed.
Tel./Office:
Post code:
Tel./Mobile:
City:
FAX:
Country:
Caller group:
URL:
Company:
Caller pictures
Email:
Ringtone
Street:
F
Select options from the
following fields:
Caller group:
Select a group (see also p. 27).
Caller pictures
Assign a picture to a contact. It is displayed if you are called by the corresponding phone number.
Ringtone
Assign a specific ringtone to a contact. It is played if you are called by
the corresponding phone number.
(Save)
Save changed settings.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phonebook.fm
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
25
Contacts
I
Select name.
Change entry
Open contacts (in standby mode):
B The number is dialled.
CMContacts
If several phone numbers are stored
for one contact:
I
Select required entry.
I
Select phone number.
§View§
Press.
B The number is dialled.
I
Select input field.
§Edit§
Open entry.
J
Contacts menu
Make changes.
§Save§
Save.
Different functions are available,
depending on the context:
Call
Open contacts (in standby mode):
CMContacts
§Options) Open menu.
View, Edit, New entry, Delete, Delete all,
Voice dialling (p. 69), Copy entry, Send
SMS, Capacity
Special functions:
Copy entry
Copy current entry from
contacts to the SIM card.
Send SMS
Use the current entry as
the recipient for an SMS.
The text entry is opened
(p. 39).
Capacity Overview of already used/
available SIM entries
(
), PIN-protected SIM
entries (
) and entries in
the phone memory (
).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Contacts
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phonebook.fm
26
SIM entries
SIM card options
The entries on the SIM card are managed separately from the contacts
stored in the phone. However, you
can exchange data between the SIM
card and the contacts.
Edit SIM card entry:
Own number
Enter own phone numbers
for information.
§Options) Open menu.
View, Edit, New entry, Delete, Delete all,
Voice dialling (p. 69), Copy entry, Copy
all, Send SMS, Capacity
Copy entry
Copy current entry from
the SIM card to contacts.
Create new entry:
Copy all
Phone No.
Name
Copy all entries from the
SIM card to contacts.
Always enter phone
number with dialling code.
Call using record no.
Enter first and/or last
names.
Entries on the SIM card may be
dialled in standby mode by entering
the record number.
Record No.
Each entry is automatically
assigned a record number.
Location: SIM
Entries are stored on the
SIM card and so can also
be used on other GSM
phones.
Protected SIM
On special SIM cards,
phone numbers can be
stored in a protected location. PIN2 is required for
editing.
Activate with the function
Protected SIM only (p. 56).
J
Enter record number.
#
B
Press.
Press.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_phonebook.fm
Contacts
27
Group
Group options
Five groups are specified in your
phone to enable you to arrange your
contacts clearly.
§Options§ Open menu.
Display groups
CMContactsMGroup
Select group. The number
I
of members in the group is
shown in brackets after
the group name.
§View§
Display members of the
group.
Add group member
I
New entry
Select group and, after
clicking with the joystick,
select members list.
Create new entry. Proceed
as for Contacts.
Or
Select from contacts.
§Select§
The entry is added to the
group.
Edit name, View members, Remove
entries, Group image, Group melody,
SMS to group
Special functions:
Group image
Assign to a group a symbol that
appears on the display when one of
its members calls you.
Group melody
Assign to a group a ringtone that
always rings when one of its members calls.
SMS to group
Highlight members of the group to
whom an SMS is to be sent.
I
Select entry.
§Select§
Highlight entry and select.
§OK§
Confirm, then write message and send SMS (p. 39).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Records
28
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_records.fm
Records
Your phone stores the phone numbers of calls for convenient redialling.
CMCall registerMRecords
I
Select record.
§Select§
I
B
Or
(View)
Press.
Select phone number.
Dial phone number.
Display information on the
phone number.
Missed calls
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
Icon for missed call (in
standby mode). When you
press the right soft key, the
phone number is displayed.
Requirement: The network supports
the "Caller Identity" feature.
Calls received
Accepted calls are listed.
Calls dialled
Access to the last numbers dialled.
B
Fast access in standby
mode
Records menu
§Options) Open menu.
The records menu can be called up if
an entry is highlighted.
§Options) Open menu.
View, Correct number., Copy to, Delete,
Delete all
Special functions:
Correct number.
Load number into display
and edit it there if necessary before dialling.
Copy to
Store entry on SIM or in
contacts.
Additional information
When copying to the SIM card a new entry
can be created with the phone number or
an existing entry can be corrected.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Time/Charge
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_timecharge.fm
Time/Charge
CMCall registerMTime/Charge
29
Cost/unit
You can display charge details and
the duration of different types of
calls while you speak, as well as setting a unit limit for outgoing calls.
(PIN2 required)
Display
(PIN2 required)
I
Last call
Outgoing calls
Display the data.
Once displayed you can:
Reset display.
End display.
CMCall registerMCharge settings
(PIN2 required)
Enter the currency in which the
charge details are to be shown.
Press, enter PIN 2.
J
Enter number of units.
§OK§
Confirm.
Then confirm the credit or reset the
counter. The status display for prepaid cards may vary, depending on
the service provider.
Charge settings
Currency
L
Credit limit
Switch on.
Incoming calls
§OK§
Credit limit
§Edit§
Remain. units
§Reset§
Enter the charges per unit/period.
Special SIM cards allow you or the
service provider to define a credit or
a period after which the phone is
barred for outgoing calls.
Select type of call:
All calls
§Select§
L
L
Auto display
Call duration and call charges are
automatically displayed for each call.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
30
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_camera.fm
Camera
Camera
Use the integrated digital camera to
take photos and film videos you can
send via the Multimedia Messaging
Service or as an attachment to an
e-mail.
Take photos
First the camera must be activated.
CMCameraMActivate
The actual picture composition is
shown in the display.
Photos are stored in JPEG format in
the phone and can be displayed
using most picture viewing programs. Videos are stored in the
phone in 3GP format.
The following functions are
available:
GH
DE
C
§Yes§
Zoom in/out.
Adjust exposure.
Press. The photo is stored
temporarily.
Press to save the photo in
the photo album. Each
photo is saved under a
sequence number and
dated. The saved picture
can be renamed later.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_camera.fm
Camera
31
Once the photo has been saved you
are immediately offered the following options:
My photos
View finder
Activate the display for a
new picture.
All saved photos are available in the
photo album.
Send via MMS,
Send via E-mail
Send the photo as an MMS
or as an e-mail attachment.
Set to wallpaper
Use the photo as a background image.
Go to my photos
Open the photo album.
Additional information
When you take a photo the settings are not
stored permanently.
Status display with information
on zoom, brightness, quality,
colours, nightshot, and resolution. Press the # key to display the settings and change
them by pressing the relevant
digits.
0
CMCameraMMy photos
Display photo.
I
Select required photo. The
current photo is shown as
a small picture at the bottom of the display.
§Options) Open menu.
View
Select.
You have the following options in
display mode:
§Options) Open menu.
Zoom in/Zoom out, Previous, Next,
Delete, Info, Set to wallpaper
Scroll between the photos
in the photo album.
I
My photos options
Depending on the actual situation,
different functions will be displayed.
§Options) Open menu.
View, Send via MMS, Send via E-mail, Set
to wallpaper, Create new album, Cut,
Copy, Delete, Delete all, Rename, Info,
Copy to
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Camera
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_camera.fm
32
Special functions:
Quality
Create new album
Create a new album, give
it a name and protect its
access with a password.
Set the quality (High, Medium, Low)
when taking a photograph. A higher
rate means you can take fewer pictures but of better quality.
Copy, Cut, Paste
Cut/copy pictures from
an album and paste into
another album.
Copy to
Use picture as a background image (wallpaper)
or for identifying a caller
(p. 24).
Brightness
F
Set display brightness.
Special effects
You can take photos with a colour
tint:
Settings
Normal, Mono, Sepia, Bluish
Change the setting and
confirm with §Select§.
Resolution
Nightshot
You can set the picture resolution
(in dpi) and the maximum zoom for
external use (e.g., on a PC) regardless of what is shown in the display
(always 118x126):
Increase the exposure time in poor
light conditions. Please note that if
the camera or object you are photographing move, the picture will be
blurred.
• 160X120 (max. zoom: x3)
• 320X240 (max. zoom: x2)
• 640X480 (no zoom possible)
Please note that higher resolution
requires more memory.
F
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Camera
Video
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_camera.fm
First the video camera must be activated.
33
Once the video has been saved you
are immediately offered the following options:
Activate the display for a
new picture.
CMCameraMVideo
Standby
The actual picture composition is
shown in the display.
Send via MMS,
Send via E-mail
Send the photo as an MMS
or as an e-mail attachment.
Go to my videos
Open the directory in
which your video is saved.
Full View Play back video in full
screen mode.
Record
starts recording a video
sequence.
Stop
ends the recording.
Pause
pauses the recording.
Once you have finished recording,
use §Yes§ in the My videos directory to
save the video sequence. §No§ discards the sequence.
Play
the video sequence you
have just recorded.
ô starts the playback.
ó ends the playback.
ò pauses the playback.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Camera
34
My videos
CMCameraMMy videos
All saved videos are available in the
video album.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_camera.fm
View video
I
Scroll between the videos
in the directory. Select
required video. The current video is shown as a
small picture at the bottom
of the display.
§Options) Open menu.
View
Select.
You have the following options in
display mode:
§Options) Open menu.
Play
Play back the selected
video.
Full View Play back the video in full
screen mode; use the left
soft key to start playback.
My videos options
Depending on the actual situation,
different functions will be displayed.
§Options) Open menu.
View, Send via MMS, Send via E-mail,
Create new album, Cut, Copy, Delete,
Delete all, Rename, Info
Special functions:
Create new album
Create a new album, give
it a name and protect its
access with a password.
Copy, Cut, Paste
Cut/copy videos from
an album and paste into
another album.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Surf & Fun
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_internet.fm
Surf & Fun
Internet (WAP)
Get the latest information from the
Internet which is specifically adapted
to the display options of your phone.
Clicking on the Internet symbol in
the main menu takes you directly to
the pre-set homepage.
CMSurf & FunMHomepage
The browser is activated as soon as
you call up the function. The functions of the soft keys vary, depending on the internet page, for example "link" or "menu". The contents of
the option menus are also variable.
Browser menu
Click upwards to highlight
the browser menu and
confirm with
.
Homepage
The first WAP Internet
page displayed after the
connection has been
established (possibly determined/preset by the provider).
Favourites
Display up to 15 URLs
stored in the phone for fast
access.
Reload
Update the displayed page.
Go to ...
35
Enter URL to access WAP
page directly, e.g.
wap.my-siemens.com
Select from list of most
recently visited WAP
addresses.
Display URL Shows the URL for the current page.
End
Close the browser and
clear down the connection.
Advanced ... Inbox
WAP push messages are
stored here (depending on
provider).
Restart browser
Restart session and clear
cache.
Via
Information about the WAP
browser used plus security
information.
End
A
Hold down to clear down
the connection and to
close the browser.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Surf & Fun
36
Settings
Activate WAP profile
Homepage
I
CMSurf & FunMSelect function.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_internet.fm
Select the homepage set. See also
below: Set WAP profiles.
You can change the current profile
each time you access the Internet.
§Activate§
Favourites
A list of 15 URLs stored in the phone
for fast access.
Start
Start selection and visit
URL.
§Options) Open menu.
Edit
Change entry or create a
new entry.
Delete
Delete entry.
Select profile.
Activate. The current profile is selected.
Set WAP profile
Up to 5 WAP profiles can be set (if
not barred by provider). The entries
may vary depending on the service
provider:
I
Select profile.
§Edit§
Open to make settings.
Delete all Delete all positions.
Profile name
Enter/change name.
WAP proflies
IP address
Preparation of the phone for WAP
Internet access depends on the current service provider:
IP port
• The settings have already been
made. You can start immediately.
• Access profiles for a number of
providers have already been set.
Then select and activate profile.
• The access profile must be set
manually.
If necessary, check with your service
provider for details.
Homepage
Enter IP address.
Enter port number.
Enter homepage, if not set
by the service provider.
Linger time
Time in seconds after
which a connection should
be ended if no input or
data exchange takes place.
Select mode
Connect using GPRS or
CSD.
CSD settings
Select or set access profile
via CSD
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Surf & Fun
GPRS settings
Select or set connection
profile via GPRS
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_internet.fm
WAP Push Setting
Switch on/Switch off
You can activate or deactivate the receipt of messages from your provider.
Service centre only
You will receive only WAP
push messages from a previously defined service
centre.
Additional information
37
WAP can be used to download applications (e.g.,
ringtones, games, pictures, animation) from the
Internet. Downloading or running applications will
not affect or change the software already installed on your Java™-enabled mobile phone.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applications subsequently installed by the customer and
not included in the original delivery package. This
also applies to functions enabled subsequently at
the customer's instigation. The purchaser bears
sole risk for the loss of, damage to, and any defects arising in, this device or the applications and
for any direct damage or consequential damage
of whatever nature resulting from the use of these
applications.
For technical reasons, such applications and subsequent enabling of certain functions are lost in
the event of the device being replaced/re-supplied and may be lost if it is repaired.
In these cases the purchaser will need to download the application again or re-enable it as well.
Note that your device has Digital Rights Management (DRM) so that individual applications downloaded via WAP are protected against
unauthorised copying. These applications are only intended for your device and cannot be transmitted from this device for backup purposes.
Siemens does not warranty or guarantee or accept any liability for the customer's ability to
download, enable, or back up applications again
or to do so free of charge.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Downloads
38
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_downloads.fm
Downloads In the download zone you will find
the folders for the different items
that can be downloaded such as pictures, sounds and games.
Download more
At the beginning of each file you will
find the direct number for downloading additional items.
Download more
Select.
CMDownloads
Various different items are already
located in each folder. Select the
folder you require:
Ringtones
Sounds
Pictures
Games
Wallpaper
§Select§
The folder is opened and
the contents shown as a
list.
I
Select the item you
require.
§Select§
The picture is shown or the
sound played or else the
game is started.
C
Press.
Download options
§Options) Open menu.
Different functions are available,
depending on the folder selected.
View, Send via MMS, Send via Email, Set
to wallpaper, Create new album, Cut,
Copy, Delete, Delete all, Rename, Info,
Copy to, Change password, Detail
Special functions:
Create new album
Create a new album (folder) for
downloaded items. You can protect
a new album with a password.
Change password
Change the password for an album.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SMS
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
SMS
You can transmit and receive very
long text messages (up to
1520 characters) on your phone.
They are automatically composed of
up to 10 "normal" SMS messages
(note higher charges).
Additionally you can insert pictures
and sounds in an SMS.
Depending on the service provider,
e-mails and faxes can also be sent
and e-mails received via SMS
(change setting if necessary, p. 43).
39
§Options) Open menu.
Send message
Select.
J
/
§OK§
Enter phone number or
select from contacts.
Confirm. Send the SMS to
the service centre for
transmission. The sent
SMS can be saved in the
Outbox list.
Display in the uppermost line:
T9 active.
Writing and sending text
messages (SMS)
CMMessagesMSMS
MNew SMS
J
Text input using "T9" (p. 21)
allows you to create longer
messages very quickly
using just a few key
strokes.
§Clear§ deletes letter by letter.
abc/Abc/
ABC/123
Lowercase/uppercase
letters and digits.
Additional information
SMS profiles......................................p. 43
If Message type, Validity period,
Service centre are requested...........p. 43
Enter special characters....................p. 20
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SMS
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
40
Text menu
Add pic.&sound
§Options) Open menu.
Send message, Store message, Message
size, Text format, Add pic.&sound, Delete
all, Predefined text, Add number
Special functions:
Insert pictures and sounds into message.
Text format
Comprises the following
functions for formatting
text:
J
Write message.
§Options) Open the text menu at the
end of a word.
Add pic.&sound
Select a section from the
following menu:
Font color
Pre. animation
Background color
Pre. sound
Font size
Own animation
‰ Bold text
‰ Underline
‰ Italic
‰ StrikeThrough
Own pic
Alignment
Line feed
Add pic.&sound
See below.
Predefined text
Use text blocks (p. 23).
Add number
Add a phone number from
contacts.
Own sound
§Select§
Press. The first entry of the
selected section is displayed.
I
Select entry.
§Select§
The selection is added to
the SMS.
Additional information
You can attach pictures and sounds totalling up to 48 KB per message.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SMS
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
Additional information
Pictures and sounds can only be played
back if the destination phone supports the
EMS standard.
In input mode, a wildcard (musical note) is
shown when a melody is selected.
SMS to group
You can send an SMS message as a
"circular" to a recipient group. See contacts
p. 27.
SMS status report
If the message cannot be transmitted to the
service centre you are offered the chance
to repeat the transmission. If this also fails,
contact your service provider.
The Delivered message only indicates
transmission to the service centre. This will
then attempt to relay the message within a
certain period.
See also Validity period, p. 43.
SMS push
This function allows you to dial an Internet
address (URL) directly from a received
SMS. Once marked, the highlighted URL is
displayed. Pressing the Call key dials the
highlighted Internet address.
41
Read new SMS
Arrival of a new SMS
announced on display.
>
To read the SMS, press the
right soft key below the
mail symbol.
Lists
All SMS messages are archived in
four different lists, according to their
status.
CMMessagesMSMS
M Select list.
Inbox
The list of received SMS messages is
displayed.
New, unread messages.
Read messages.
Draft
The list of the SMS messages not yet
completely transmitted is displayed.
Transmission can be restarted.
Outbox
The list of sent SMS messages is displayed.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SMS
42
SMS archive
The list of text messages stored in
the phone is displayed.
Messages in the archive.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
Lists options
Each list offers different functions as
applicable.
I
Select required SMS.
(Read)
Display SMS.
(Options) Open menu and select the
function you require:
Detail, Reply, Forward, Edit, Delete,
Delete all, Extract number, Move to
archive, Extract media, Extract URL
Special functions:
Delete
Deletes selected SMS.
Reply
Create New.
Edit Edit received SMS.
Answer is yes/Answer is no
Answer with yes or no
only.
Forward
Forward SMS.
Edit
Edit SMS.
Detail
Shows date/time plus
recipient/sender.
Delete all Deletes all the text messages in this list.
Move to archive
Move SMS message to
archive.
Additional information
Message memory full. Delete
SMS messages you no longer
require or move them to the
archive.
Ringtones, logos ...
You can receive links for downloading ringtones, screen savers, animations and information about applications with an SMS.
The link contained in an SMS is highlighted
by selecting the Extract function. The WAP
connection is established after confirming
the Launch function. You can also add the
link to your bookmarks by selecting Bookmark.
Please check that the dial-in access (p. 57)
is configured.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SMS
SMS setup
CMMessagesMSMS
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
MSMS setup
Up to 5 SMS profiles can be set. The
transmission characteristics of an
SMS are defined in these. The presetting depends on the SIM card
inserted.
Activate the preselected profile
I
Select profile.
§Activate§ Press to activate profile.
Set/change profile
I
Select profile.
§Options§ Open menu.
Edit
Select.
Service centre
Enter or edit the service centre
phone numbers (you can obtain this
information from your service provider).
Message type
Manual
The message type is
requested for each message.
Normal text
Normal SMS message
(standard setting).
43
Transmit to other services
via SMS:
Fax, Voicemail, ERMES, Paging, X.400, Internet
Validity period
Select the period in which the service centre is to try to deliver the message:
 1 day
 2 days
 1 week
 4 weeks
 6 months
Status report
L
You will receive confirmation as to
whether a message has been delivered successfully or not. This service
may be subject to a charge.
Direct reply
L
The reply to your SMS message is
handled via your service centre
when Direct Answer is activated (for
information please contact your
service provider).
SMS via GPRS
L
Send SMS automatically by GPRS
(if available). Requirement: GPRS is
activated. Ensure that your service
provider offers this function.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
44
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
MMS
MMS
The Multimedia Messaging Service
enables you to send texts, pictures
(also photos) and sounds in a combined message to another mobile
phone or to an e-mail address.
Depending on your phone's settings,
you will receive either the complete
message automatically or notification that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Ask your service provider whether
this service is available. You may
need to register for this service separately.
Writing/sending MMS
messages
Pictures and graphics can be created
using the integrated digital camera
or selected from the standard animations and inserted into an MMS.
CMMessagesMMMS
MNew MMS
(Insert)
Press.
Insert picture
Insert a picture. The picture list is
opened for selection.
Text modules
Write a text with the help of T9.
Insert photo
Select from the photo album and
insert.
Text modules
The list of text modules is opened for
selection.
Sound
Add a sound.
An MMS consists of the address
header and the content.
Ringtone
Add a ringtone.
An MMS message can consist of a
series of pages, each one of which
may include a combination of text,
sounds and pictures.
Insert wallpaper
The list of background images (wallpapers) is opened for selection.
Texts can be written with the help of
T9 (p. 21).
Insert page
A new page is added to the MMS.
Display time
Set duration of display for individual
pages (1 second to 33 seconds).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
MMS
Options for writing MMS messages
45
Receive MMS
Arrival of new MMS
announced on display.
(Options) Open menu.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
Send MMS
Enter recipient details:
To :
Phone number/e-mail
address of recipient.
Subject : Enter MMS heading
(up to 40 characters).
>
Press the right soft key to
read the MMS or notification.
Receive according to setting:
• complete MMS,
Cc :
E-mail address for the copy
recipient.
• notification only. To receive the
complete MMS, press §View§.
Bcc :
E-mail address for blind
copy recipients (the
other recipients are not
shown the Bcc recipient).
Lists
Store MMS
Stores the MMS as a draft.
Delete items
Delete an item on a page, e.g.,
a picture.
Info
Information about the size of the
message.
Preview page, Preview MMS
Play back page/whole MMS in the
display. Use any key to cancel.
All MMS messages are saved in three
different lists:
CMMessagesMMMS
M Select list.
Inbox
The list of MMS messages and notifications received is displayed.
§View§
Automatic presentation of
the MMS. Use any key to
cancel.
I
J
Scroll page by page with
the control key.
A
End playback.
Call up individual pages
directly by number key.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
MMS
46
MMS setup
Draft
The list of the MMS messages not yet
completely transmitted is displayed.
Transmission can be restarted.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
Outbox
The list of sent MMS messages is displayed.
List options
The following functions are available
depending on the list selected:
§Options§ Open menu.
Reply, Reply all, Forward, Call, Delete,
Info, Extract, View again
Special functions:
Extract
Pictures
Save picture as a screensaver.
Sounds
Save sound as a ringtone.
CMMessages
MMMSMMMS setup
I
Select function.
Validity
Select the period in which the service centre is to try to deliver the message. Choose between:
 1 day
 2 days
 1 week
 4 weeks
 Maximum*
* Maximum period that the service provider
permits.
Delivery report
Request delivery confirmation for
sent messages.
MMS retrieve
Choose between Auto download,
Deferred retrieve for an SMS, or reject
reception.
Allow info receiving
Only the notification is received.
Allow Spam
Permit reception of advertising SMS
(SPAM).
When roaming
Switch MMS reception on/off outside your home network. This means
that no charges are incurred for
incoming messages.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
MMS
47
MMS profile
A maximum of 5 MMS profiles can
be selected. The entries may vary
depending on the service provider:
Memory status
I
Select profile.
Display memory already used or still
available.
§Edit§
Open to make settings.
Profile name
Enter/change name.
IP address
IP port
Homepage
Enter IP address.
Enter port number.
Enter homepage, if not set
by the service provider.
GPRS Bearer
Settings (p. 58).
CMMessagesMMMS
MMemory status
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
E-mail
48
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
E-mail
Your phone has an e-mail program
(client). You can use it to create and
receive e-mails.
Write new e-mail
CMMessagesME-mail
MNew E-mail
Enter e-mail address
§Options§ Open menu and select
"recipient".
To:/Cc : E-mail address of
receiver(s).
The e-mail address may be
selected from contacts by
clicking on the joystick.
J
Subject: Enter e-mail heading (up to 255 characters).
Add attachment: See below.
*
Press briefly to write special
characters such as @ (p. 20).
T9 helps you write e-mails (p. 21).
Options
§Options§ Open menu.
Input text.
Save
Store in drafts.
Send
Send e-mail.
Add attachment
An e-mail may contain up to
four attachments (e.g., pictures).
I
Attachment 1:
§Options§ Open menu.
Add
pictures, photos, background images (wallpaper), ringtones or sounds.
Receive/read e-mail
CMMessagesME-mail
MReceive
Before an e-mail can be read, it must
be retrieved from the server. The
service provider is dialled with the
default access profile (p. 58) and all
e-mails are transmitted to the inbox
list.
Additional information
The e-mail client always receives complete
messages including header, content and, if
applicable, attachment. You can restrict the
size of the received messages (p. 50).
E-mail size is limited to 256 KB.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
E-mail
Lists
CMMessagesME-mail
M Select list.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
Inbox
The list of received e-mails is
displayed.
Draft
The list of e-mails not yet transmitted is displayed.
Outbox
List of e-mails already sent.
List options
The following functions are available
depending on the list selected:
§Options§ Open menu.
Reply, Reply all, Forward, Delete, Send,
Edit, Copy to, Delete all, View
49
E-mail setup
CMMessagesME-mail
ME-mail setup
Before using this service, you must
set the server access and your e-mail
options. The data for these may
already have been entered. Otherwise your service provider will supply you with the relevant information.
Set profile
I
Select profile.
§Options§ Open menu.
Edit
Select.
Additional information
Your service provider must support the
following protocols for successful data
exchange with the e-mail server:
POP3 and SMTP or eSMTP.
E-mails will be MIME-encoded for transmission.
Encryption of e-mail transmission (SSL,
APOP) is not possible at present.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
E-mail
50
Connect using
Download
Select mode
Automatic, CSD settings, GPRS settings
Header only
Only the subject of an e-mail is
downloaded from the server (no
attachments, no e-mail text).
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
CSD settings
Select the CSD profile.
GPRS settings
Select the GPRS profile.
User name
Enter, for example, your name.
Incoming setup
Server:
Enter IP address.
Port:
Enter port number.
Authentication:
Activate/deactivate.
Account: Enter account, if not set by
the service provider.
Password: Your password.
Outgoing setup
See Incoming setup.
E-mail address
Your e-mail address, e.g.:
name@domain.abc
All
The e-mail client receives complete
messages including heading, contents, and attachment where applicable.
Memory status
CMMessagesME-mail
MMemory status
Display memory already used or still
available.
Additional information
You can append attachments with a
totalling up to 47 KB per message.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Voice msg./mailbox
Voice msg./ Most service providers supply an
external voice mail service. A caller
mailbox
may leave a voice message for you in
this mailbox
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
• if your phone is switched off or
not ready to receive,
• if you do not want to answer,
• if you are making a phone call
(and if Call waiting is not active,
p. 17).
If voice mail is not part of your service provider's package, you will need
to register and settings may have to
be made manually. The following
description may vary slightly,
depending on the service provider.
Listening to message
L
A new voice message can be
announced as follows, depending on
the service provider:
Icon plus beep.
Or
A text message announces
a new voice message.
Or
You receive a call with an automatic
announcement.
To listen to the mailbox:
CMMessagesMVoice msg.
(Listen)
Press.
51
Away from your home network you
may have to dial a different mailbox
number and enter a password before
you can listen to any messages.
Settings
L
The service provider supplies you
with two phone numbers:
Save mailbox number
Call this phone number to listen to
the mailbox.
To change the phone number:
CMMessagesMVoice msg.
§Edit§
Press.
J
Enter phone number.
§OK§
Confirm.
Save call divert number
Calls are diverted to this phone
number.
CMCall registerMDivert
Select condition for call divert, e.g.:
Unanswered.
Set
Press.
J
Enter call divert number.
§OK§
Confirm.
Registering with the network starts.
Divert will be confirmed after a few
seconds. Further information on call
divert can be found on (p. 60).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
52
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_messages.fm
Cell broadcast
Cell broadcast
Some service providers offer information services (info channels), e.g.,
area code numbers, stock exchange
information. If receive has been activated you will receive messages
about the subjects that are active in
your "Topic list".
CMMessagesMCell broadcast
Broadcast
You can switch the cell broadcast
service on and off. If the CB service
is activated, operating time for the
phone will be reduced.
Read new CB
Download current messages.
Topic list
You can add any number of topics to
this personal list. At least ten entries
may be entered using the channel
number (ID) and, if required, the
name itself. Five topics may be
active in each of the two sections:
User defined
<New entry>
Select.
Enter a topic with its channel
number and confirm with §OK§.
Current
<New entry>
Select.
Select a topic from the list.
Auto display
CB messages are displayed in
standby mode; longer messages are
scrolled automatically.
CB languages
You can specify the language in
which you wish to receive CB messages.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Settings
53
Record Voice ringtone
Settings
The list of recordings is displayed.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
Audio settings
CMSettingsMAudio settings
M Select function.
Volume
I
Select the section for
which the volume of the
ringtone is to be set:
Any call
Alarm
Cell broadcast
§Edit§
F
§Save§
Press.
Set volume.
Save setting.
Ringtones
Set an individual ringtone for each
section:
Any call
Alarm
Cell broadcast
Voice ringtone
You can use any individual sound
recording (voice, noise or music) as
a ringtone.
§Options) Open menu.
New record
Record a new ringtone.
§Record§
Start recording.
Stop§
End recording.
§Save§
The recording is automatically saved with a time
stamp which can be overwritten.
§Play§
Play back recording before
storing it.
Ringer setting
On/Off
Activate/deactivate all
ringtones.
Beep
Reduce ringtone to a short
signal (beep).
Additional information
Display: ringtone off.
Silent alert
Activate/deactivate silent alert (functions in addition to ringtone).
Key tones
You can set the type of acoustic key
tone:
Click or Tone or Off
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Settings
54
Composer
You can also compose five simple
ringtones of your own.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
§Options) Open menu.
Edit
Select.
J
F
Keys 1 to 7 correspond to
the notes C, D, E, F, G, A, B.
#
Raise/lower the note by a
semitone.
In the melody, to move
one note up or down.
Increase length of notes/
rests.
*
B
0
Decrease length of notes/
rests.
Raise/lower the note by an
octave.
Sets a rest.
§Options) The menu offers other
functions:
Edit, Set as ring, Rename, Info.
Device
CMSettingsMDevice
MSelect function.
Language
Set the language of the display text.
When Automatic is set, the language
of your service provider is used.
If a language that you do not understand happens to be set, the phone
can be reset to the language of your
home service provider with the following input:
*#0000#B
Display
Illumination
Switch off illumination, illuminate
display only or display plus keypad.
Contrast
Set display contrast:
I
Press the joystick repeatedly at the top/bottom to
adjust up or down.
Brightness
Set display brightness:
Press the joystick repeatedly at the top/bottom and
select the brightness you
require.
I
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
Settings
55
Wallpaper effects
Own greeting
Set the arrangement and effects for
the wallpaper graphics for the display.
Enter greeting to be displayed
instead of animation when phone
is switched on.
Logo display
Activate/deactivate display of service
provider logo.
J
Delete old greeting and
create new greeting.
§OK§
Confirm changes and
switch on.
Screensaver
The screensaver shows a picture in
the display after 70 seconds of inactivity. The function is ended by an
incoming call or by pressing any key.
The screensaver may be a time display, the provider logo or a slide
show made up of your own photos.
Auto key lock
If activated, the keypad is locked
automatically if no key has been
pressed for 30 seconds in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
Hold down.
#
Checking status
Factory settings
Reset phone to default values (factory setting).
Phone identity
IMEI
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
T9 input
T9 input language
Select language for text entry.
T9 preferred
Activate/deactivate intelligent text
entry.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Settings
56
During calls
Any to answer
CMSettingsMDuring calls
Incoming calls can be accepted by
pressing any key (except for A).
Call screening
Hide ID
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
M Select function.
Only calls from numbers that are
stored as contacts or in a predefined
group are signalled audibly or by
silent alert. Other calls are only displayed.
If you do not accept these calls, they
are diverted to your mailbox (if set,
p. 60).
In standby mode: call
screening is activated.
Call waiting
L
If you are registered for this service,
you can check whether it is set and
you can activate or deactivate it.
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
When you make a call, your phone
number can be displayed on the
recipient's display (depending on the
service provider).
To suppress this display, you can
enable the "Hide ID" mode for all subsequent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Security
CMSettingsMSecurity
MSelect function.
Codes
(see p. 12)
Protected SIM only
L
(PIN2 protected)
Dialling options are restricted to SIMprotected phone numbers. If only
area codes are entered, relevant
phone numbers can be added to
these manually before dialling.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Settings
This SIM only
L
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is
entered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a different SIM card, enter the phone
code when requested.
Network
CMSettingsMNetwork
MSelect function.
Line
L
To use this function, two separate
phone numbers must be registered
on the phone.
Select line
Select the currently used phone
number.
Display the active line:
Block line
(Phone-code protected)
You may limit usage to one phone
number.
57
Configuration
Network info
The list of GSM networks currently
available is displayed.
Choose network
Network search is restarted. This is
useful if you are not on your home
network or want to register on a different network. The network list is
rebuilt when Auto network is set.
Auto network
If Auto network is activated, the next
network is dialled in the order of
your Pref. network. Otherwise a different network can be selected manually from the list of the available GSM
networks.
Pref. network
Enter your preferred service providers here for when you leave your
home network (e.g. if there are differences in price).
Additional information
If the signal strength of the preferred network is inadequate when you switch on the
phone, the phone may register in a different
network. This can change when the telephone is next switched on or if another network is selected manually.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Settings
58
Connectivity
CMSettingsMConnectivity
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
MSelect function.
GPRS (General Packet Radio Service)
is a method for transmitting data
faster in the mobile network. Use
GPRS and if the network has sufficient capacity, you can be connected
to the Internet permanently. Only
the actual transmission time is
charged by the network operator.
Some service providers do not yet
support this service.
CSD (Circuit Switched Data)
Data transfer is made via a data connection to a default IP address of
your network provider or service provider. This connection can be used
for exchanging data, such as, for
example, Internet access, or for
downloading games and applications as well as for using WAP services.
Shown in the display:
Registered.
GPRS connection active.
Bearer settings
For the SMS, MMS, WAP and E-mail
services at least one connection profile must be set up and activated.
You can obtain the current settings
from your service provider.
CSD settings
If it has not been pre-installed, enter
the data or enter the required settings (your service provider will supply you with information on this):
Profile name
Give the profile a name or overwrite
one that has been preselected
Call type
Select ISDN or analogue.
Dial number
Enter ISP number.
User name
Enter login name.
Password
Enter password (shown as a series of
asterisks).
DNS
Enter the IP for the domain name
server.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Settings
GPRS settings
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_settings.fm
You can activate GPRS for the profile
and change the settings here. You
can only start to use GPRS once you
have activated GPRS on your phone.
Profile name
Give the profile a name or overwrite
one that has been preselected.
GPRS APN
Enter service provider address.
Authentication
Activate/deactivate.
User name
Enter login name.
Password
Enter password (shown as a series of
asterisks).
DNS
Enter IP for the domain name system.
GPRS info
Show information about the connection (download volume/duration).
Transfer rate
Set the data transfer rate.
Additional information
Prolonged GPRS connection can cause
the temperature of the phone to rise. This
is normal and not dangerous.
59
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Divert
60
Divert
CMCall registerMDivert
Not reachable
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
Divert occurs if phone is switched off
or is out of range.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_divert.fm
Set up call divert (example):
The most common condition for call
divert is, for example: Unanswered
I
Select Unanswered
L
(includes the conditions Not reachable, No
reply, Busy; see below).
§Select§
Press.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated (p. 56), you
will hear the call waiting tone during
a call.
Set
Press.
J
Enter the phone number
to which the caller will
be diverted (if not already
done).
Fax calls are diverted to a number
with a fax connection.
Confirm. After a short
pause, the setting is confirmed by the network.
Data calls are diverted to a phone
number with a PC connection.
§OK§
All calls
All calls are diverted.
L
Icon in the top line of the
display in standby mode.
Receiving fax
Receiving data
L
L
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Divert
Status check
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_divert.fm
You can check the current divert status for all conditions. After a short
pause, the current situation is transmitted by the network and displayed.
Clear all
All set diversions are cleared.
L
61
Additional information
Note that the divert is stored in the network
and not in the phone (e.g., when the SIM
card is changed).
Check condition or delete it
First select the condition.
§Select§§
Press.
Check status
Select.
Or
Deactivate
Select.
Edit phone number
Proceed as with "Set divert". When the
stored number is displayed:
§Delete§
J
Press. The phone number is
deleted.
Enter new number and confirm.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_barrings.fm
Barrings
62
Barrings
CMCall registerMBarrings
L
Barring restricts the use of your SIM
card (this is not supported by all service providers). You need a 4-digit
password which your service provider will give you. You may need to
be registered separately for each
barring.
All outgoing
All outgoing calls except emergency
numbers 112 and 999 are barred.
Outgoing intern.
(International outgoing)
Only national calls can be made.
Out.int.or home
(International outgoing without
home country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
Incoming
The phone is barred for all incoming
calls (forwarding all calls to the mailbox produces a similar effect).
When roaming
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
Status check
Status check for network barring.
Clear all
All barrings are deleted. A password
which the service provider will give
you is needed for this function.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Closed user group
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_closedusergroup.fm
Closed user
group
CMCall register
MClosed user group
M Select function.
Depending on service provider, L
you can create groups with this
service. These can have access to
internal (company) information, for
example, or special tariffs apply.
Please check with your service provider for details.
Closed user group
Activate/deactivate function. Closed
user group must be deactivated for
normal phone use (phone code,
p. 13).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outg. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
63
Pref. group
If activated, calls may only be made
within this standard user group
(depending on the network configuration).
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Fast access key
64
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_FastDial.fm
Fast access The right soft key and the number
keys 2 to 9 (speed dialling numbers)
key
can each be assigned an important
phone number or a function. The
phone number can then be dialled or
the function can be started at the
touch of a button.
Left soft key
Assign a function/phone number to
the left soft key for fast access.
Edit
§Camera§ Press briefly.
§Edit§
Speed keys
Number keys 2 to 9 can be used as
speed dialling numbers for fast
access. Number key 1 is reserved for
the mailbox (p. 51).
Edit
J
Press a number key in
standby mode (2–9). If the
key is not yet assigned:
§Set§
Press.
I
Select application.
§Select§
Confirm setting.
For Phone No. pick out a
name from contacts for
assignment to the key.
Scroll to new application in
the list.
• Assign a new application (e.g.
New SMS) to the soft key.
§Edit§
• Special case Phone No. From contacts/SIM, pick out a name (e.g.
"Carol") to assign to the soft key.
Apply
Confirm setting.
3
§Select§
Apply
The setting "Carol" is used here only
as an example.
§Carol§
Hold down.
See "Left soft key".
Start a stored application or dial a
phone number.
In standby mode, hold
down.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
Extras
General
The calendar offers a
(Month)
(Week)
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
IF
CMExtras
You will find the following functions
here:
Organiser, Clock, Calculation and Voice
control
Organiser
CMExtrasMOrganiser
M Select function.
Calendar
You can enter appointments in the
calendar. Time and date must be set
for the calendar to work correctly
(p. 67).
65
monthly view,
weekly view.
Select the required day in
the views.
Agenda
(Agenda) Daily overview.
Enter new appointments or display
entries already recorded.
If there are appointments entered,
the appointments for the selected
day are displayed in chronological
order.
If an appointment time is reached
with the alarm set, you will hear a
signal tone.
• New entry
<New entry>
Select.
J
Make entries in the fields.
Subject
Describe the entry.
Start date: If necessary, change the
start date.
Start time: If necessary, change the
start time.
Status:
Outstanding or Done.
• Display entry
I
Select entry
(View)
Display entry.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
66
Calendar options
Text entry options
§Options) Open menu.
§Options) Open menu.
Send, Save, T9 input, Line feed, Clear text
• Display entry.
View, Edit, New entry, Delete, Delete all,
Capacity
I
Select entry
All appointment entries are displayed in chronological order. If an
alarm is missed it appears in the list
of missed appointments.
(View)
Press.
<New entry>
See Agenda p. 65.
View, Edit, New entry, Delete, Delete all,
Confident, Send, Capacity
Special function:
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
Appointments
Additional information
You can enter up to 50 appointments.
Notes
Use your phone as a notepad. T9
support makes it easier to write short
notes.
• New entry.
<New entry>
Select.
J
Enter text, 50 characters
maximum.
§Options) Open menu.
Save
Store entry.
Notes options
§Options) Open menu.
Confident (confidential)
Protect confidential notes with the
phone code (p. 12). We recommend
that you do not store any passwords
(PIN, TAN etc.) as notes.
Missed appointments
Events with an alarm to which you
have not reacted are listed for reading.
Additional information
Missed appointment.
Missed alarm.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
Clock
Countdown
CMExtrasMClock
A set time elapses. The last
3 seconds are indicated by a beep. At
the end a special beep sounds.
Alarm Cl.
(Set)
Set period of time.
The alarm will ring at the time set by
you (even when the phone is
switched off).
§OK§
Confirm.
§Start§
Start counter.
§Stop§
Interrupt counter.
(Edit)
Change period of time.
§Reset§
Reset counter to start time
(after interruption).
M Select function.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
67
World clock
Local city
Select the town for your time zone:
(Set)
Press.
I
Navigate to input fields.
Status:
(Edit)
Switch on/off.
Time:
Enter alarm call time.
F
Set days for alarm calls.
Select day:
(Edit)
Press. To switch a day on/
off.
§OK§
Confirm.
Additional information
When the alarm clock is
switched on, the display is also
in standby mode.
(Edit)
Open map of the world.
I
Navigate to towns.
§Select§
Confirm and indicate
whether you are using
summer time.
Time
Set the time of day. The clock must
be set correctly once at the initial
start-up.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
68
Set date
Set the local date.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
Time format
Select 12 hours or 24 hours.
Date format
Select the date format from
4 different modes of presentation,
e.g. DD/MM/YYYY or MM/DD/YYYY.
Auto off
The phone switches off each day at
the set time.
Calculation
CMExtrasMCalculation
M Select function.
Calculator
J
I
J
Enter number (up to
7 digits including decimal
separator).
Select calculator function.
Repeat procedure with
other numbers.
Press.
>
(Edit)
Press to activate/deactivate, then enter time.
Special keys
Toggle between "+" and "–".
§OK§
Confirm.
(Set)
If the battery is removed for longer than
30 seconds, the clock must be reset.
*
#
<
Result is displayed.
Set decimal point.
Delete digit to the left of the
cursor.
Currency conv.
You may calculate the exchange
rates between two currencies.
Rate setting
Domestic Enter the rate for the
domestic currency
(e.g., 1).
Foreign Enter the rate for the foreign currency.
§Save§
Save setting.
Compute
Enter the sum to be converted.
J
§Convert§ Start calculation. The
result is displayed.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
Voice control
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
control
CMExtrasMVoice
M Select function.
Up to 10 phone numbers or functions can be dialled or started by
stating a name. The voice dialling
entries are stored in the phone (not
on the SIM card!).
Apply
G
Press. Start voice control
(in standby mode).
Now speak the name or function.
The phone number is dialled or the
function carried out.
Noisy environments may affect voice
recognition. If attempt was unsuccessful, press the side key once more and
repeat the name.
Voice dialling
(for phone numbers)
69
Now say the name. After a second
beep and message in the display,
repeat the name. A beep confirms
the recording and all entries are displayed.
Edit
I
Select entry.
§View§
Display entry.
§Play§
Play recording.
Or
(Edit)
Edit name or phone
number.
Voice command
(for functions)
A list with the functions available is
displayed. Entries for which a voice
command is stored are marked with
a symbol.
Record
Record
<New entry>
Select then
I
Select function.
§Record§
Display function.
J
enter name and phone
number.
§Yes§
Confirm selected function.
§Start§
Start recording.
§Save§
Confirm.
§Start§
Start recording.
A short signal sounds.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
70
Now speak the command for the
function. The phone will repeat it.
Carry out procedure again. A beep
confirms the recording and the list is
displayed again.
Other functions in the options
menu:
Voice ringtone
Delete
CMExtrasMVoice ringtone
Record short voice messages and
then specify them as a ringtone.
Record
Options
Open menu.
§New record§
Start recording.
Stop§
End recording.
§Save§ Save
or
§Play§ play back.
§Save§
The recording is automatically saved with a time
stamp.
Set as ring
Specifies the selected
recording as the ringtone.
Deletes the selected
recording.
Delete all Deletes all voice ringtone
recordings.
Rename
Renames the file.
Info
Gives information about
file name, time created,
file type and file size.
Warning!
The use of this feature may be subject to
restrictions under criminal law.
Please inform the other party to the conversation in advance if you want to record a
conversation and please keep such recordings confidential.
You may only use this feature if the other
party to the conversation agrees.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Extras
Play back
The list of recordings is displayed.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_organiser.fm
I
Select recording.
The selected recording is
played back automatically.
Voice for MMS
71
The following options are available
in the Record voice menu:
New record
Start new recording.
Play
Play back selected recording.
Record voices and noises and then
send them by e-mail or MMS.
Send via MMS/Send via Email
Send selected file by MMS
or e-mail.
Record voice
Shows the list of recorded
sound and plays the
selected file.
Delete
Data rate Select the required data
transfer rate (a higher data
transfer rate means better
quality but also takes up
more memory).
Send to Media Album
Download selected file
into the media album.
Deletes the selected
recording.
Delete all Deletes all voice ringtone
recordings.
Rename
Renames the file.
Info
Gives information about
file name, time created,
file type and file size.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
72
Customer
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_hotline.fm
Care
Customer Care
We offer fast, individual advice! You have several options:
Our online support on the Internet:
www.my-siemens.com/customercare
We can be reached any time, any place. You are given 24 hour support on all aspects of our
products. Here you will find an interactive fault-finding system, a compilation of the most frequently asked questions and answers, plus user guides and current software updates to
download.
You will also find the most frequently asked questions and answers in the section
"Questions and answers", p. 74.
You can also get personal advice about our range of products on our Premium Hotline:
United Kingdom: 0906 9597500 (0.75 £ per minute)
When calling customer service, please have ready your receipt and the phone identity
number (IMEI, to display press # 0 6 #), the software version (to display, press # 0 6 #,
then §Info§) and if available, your Siemens Service customer number.
Qualified Siemens employees are waiting to offer you expert information about our products
and installation. In some countries repair and replace services are impossible where the
products are not sold through our authorised dealers.
If repair work is necessary, please contact one of our service centres:
*
Abu Dhabi .........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .....................................................40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
*
Germany ......................................0 18 05 33 32 26
Greece .........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India .............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy ................................................02 24 36 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait ....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg.........................................43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta .......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_hotline.fm
Customer Care
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman........................................................79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam...........................................84 89 30 01 21
Zimbabwe ............................................04 36 94 24
73
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
74
Questions & Answers
Questions &
If you have any questions on the use of your phone, you can contact us at
Answers
www.my-siemens.com/customercare around the clock. As further help we have listed
below some frequently asked questions and answers.
Problem
Possible causes
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_faq.fm
Phone cannot On/Off key not pressed long
be switched on. enough.
Possible solution
Press On/Off key for at least 2 seconds.
Flat battery.
Charge battery. Check charging indicator in the display.
Battery contacts dirty.
Clean contacts.
See also below under “Charging
error”.
Standby time is Frequent use of organiser and
too short.
games.
Display illumination on.
Switch off display illumination (p. 54).
Unintentional keystrokes (illumination!).
Activate key lock (p. 55).
Charging error Battery totally discharged.
(charge icon
not displayed).
SIM error.
Restrict use if necessary.
1) Plug in power supply unit, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Continue to charge battery.
Temperature out of range:
+5 °C to +40 °C.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and plug socket, clean them if
necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains voltage.
Wrong charger.
Only use original Siemens accessories.
Battery faulty.
Replace battery.
SIM card not inserted correctly.
Check that the SIM card is inserted correctly (p. 8).
Dirty SIM card contacts.
Clean SIM card with a dry cloth.
SIM card with wrong voltage.
Use 3V SIM cards only.
SIM card damaged (e.g. broken). Carry out a visual check. Ask service provider to
change SIM card.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Questions & Answers
Problem
Possible causes
No network connec- Weak signal.
tion.
75
Possible solution
Move to another place where the network reception is
better (e.g., window) or go outdoors.
Outside GSM range.
Check service provider's coverage area.
Invalid SIM card.
Complain to the service provider.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_faq.fm
New network not authorised. Try manual selection or select a different network
(p. 57).
Network call barring is set.
Check network barrings (p. 62).
Network overloaded.
Try again later.
Weak signal and the camera Switch the camera off and if necessary move to
is switched on.
another place.
Phone loses
network.
Calls not possible.
Signal too weak.
Reconnection to another service provider is automatic
(p. 57). Switching phone off and on again can speed
this up.
Second line set.
Set first line (p. 57).
New SIM card inserted.
Check for new barrings.
Charge limit reached.
Reset limit with PIN 2 (p. 29).
Credit used up.
Load credit.
Certain uses of
Call restrictions are in place. Barrings can be set by service provider. Check barphone not possible.
rings (p. 62).
Impossible to make Contacts memory is full.
entries in contacts.
Delete entries (p. 25).
Voice message not Call divert to mailbox not set. Set call divert to mailbox (p. 60).
functioning.
SMS (text message) flashing.
SMS memory is full.
To free up capacity, delete (p. 42) or file (p. 42) text
messages (SMS).
Function cannot be Not supported by service
set.
provider or registration
required.
Contact your service provider.
Capacity problems Memory full.
with, for example,
ringtones, pictures,
SMS archive.
Delete files in the relevant areas.
No WAP access,
downloading not
possible.
Activate and set WAP profile (p. 36). If necessary ask
your service provider.
Profile not activated, profile
settings wrong/incomplete.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
76
Problem
Questions & Answers
Possible causes
Text message cannot Service provider does not support
be sent.
this service.
Possible solution
Contact your service provider.
Phone number for service centre not Set service centre (p. 43).
set or incorrect.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_faq.fm
SIM card contract does not support
this service.
Contact your service provider.
Service centre overloaded.
Repeat procedure.
Recipient does not have a compatible phone.
Check.
EMS pictures and
Destination phone does not support
sounds not displayed the EMS standard.
at destination phone.
No Internet access
possible.
Incorrect WAP profile set, or wrong
or incomplete settings.
Check settings or contact your service provider.
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) supplied
with the SIM card according to the instructions. If the PUK (MASTER PIN) has been
lost, contact your service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (p. 72).
Service provider
Code error.
No authorisation for this service.
Contact your service provider.
Too few/too many
menu entries.
Functions may have been added or
deleted by the service provider via
the SIM card.
Check with your service provider.
No fax possible.
Wrong settings in the PC.
Check settings.
No authorisation for this service.
Contact your service provider.
Charge pulse is not transmitted.
Contact your service provider.
Charge meter does
not work.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet.
Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
connector contacts thoroughly. Stand mobile upright in an air current. Do not dismantle the phone!
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Care and maintenance
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_Maintenance.fm
Care and
Your phone has been designed and
maintenance crafted with great care and attention
and should also be treated with care.
The suggestions below will help you
to enjoy your phone for many years.
• Protect your phone from moisture
and humidity! Precipitation,
humidity and liquids contain minerals that will corrode electronic
circuits. Nevertheless, should your
phone become wet, disconnect it
immediately from the power
supply and remove the battery!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store your phone in hot
areas. High temperatures can
shorten the life of electronic
devices, damage batteries and
warp or melt certain plastics.
• Do not store your phone in cold
areas. When the phone warms up
again (to its normal ambient temperature), moisture can form
inside the phone, which may damage electronic circuit boards.
• Do not drop, knock or shake your
phone. Rough handling can damage internal circuit boards!
• Do not use harsh chemicals, cleaning solvents, or strong detergents
to clean the phone!
77
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary,
repair the device.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Product data
78
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_data.fm
Product data
Declaration of conformity
Operating time
Siemens Information and Communication mobile hereby declares that
the phone described in this user
guide is in compliance with the
essential requirements and
other relevant provisions of European Directive 1999/5/EC (R&TTE).
The operating time depends upon
the respective conditions of use.
Extreme temperatures considerably
reduce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you
require a copy of the original.
Call time: up to 270 minutes
Standby time: up to 140 hours
Frequency range:
1710–1880 MHz
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here:
the number of the SIM card (on the card):
..............................................................
15 digit serial number of the phone (under
the battery):
..............................................................
the customer service number of the service
provider:
..............................................................
Weight:
87 g
Lost phone
Size:
98 x 49 x 20 (mm)
Li-ion battery:
750 mAh
If you lose your phone or SIM card contact
your service provider immediately to prevent misuse.
Operating temp.:
–10 °C to +55 °C
SIM card:
3V
Technical data
GSM class:
4
Frequency range:
880–960 MHz
GSM class:
1
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Accessories
Accessories
Basics
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_accessories.fm
Li-ion battery 750 mAh
(V30145-K1310-X268-1)
Spare battery for increased standby and call
times
Standard charger
(V39197-F5061-F842-1) Euro
(V39197-F5061-F843-1) UK
Ideal as a spare or second charger when
travelling.
Headset PTT
Headset with PTT key to accept and end
calls
(S30880-S6851-A500-*)
Original Siemens Accessories
www.siemens.com/
mobilestore
79
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
80
Battery quality statement
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_Akku_Quali.fm
Battery qual- The capacity of your mobile phone
ity statement battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As
a result the operating time of your
mobile phone may be considerably
reduced, even after a full recharge of
the battery.
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used
for six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suffering from loss of performance,
we recommend that you replace it.
Please buy only Siemens original
batteries.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Guarantee certificate (UK)
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_guarantee_eng.fm
Guarantee
certificate
(UK)
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the conditions set out below:
• In the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either replace the device with another device reflecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the device defect is attributable to improper treatment and/or failure to comply with
information contained in the user manuals.
• This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any software supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evidence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee default becoming evident.
• Ownership of devices or components replaced by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union.
For Products sold in the United Kingdom
the Guarantee is issued by Siemens plc,
Siemens House, Oldbury, Bracknell,
Berkshire, RG12 8FZ.
81
• Any other claims resulting out of or in connection with the device shall be excluded
from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a
Customers Statutory Rights, nor the manufacturer's liability for death or personal injury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detriment of the customer.
To invoke this Guarantee, please contact the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
82
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_guarantee_eng.fm
Guarantee
certificate
(IRL)
Guarantee certificate (IRL)
Without prejudice to any claim the user (customer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer’s Guarantee under the conditions set out below:
• In the case of new devices and their components exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either replace the device with another device reflecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the device defect is attributable to improper care
or use and/or failure to comply with information contained in the user manuals.
In particular claims under the Guarantee
cannot be made if:
• The device is opened (this is classed as
third party intervention)
• Repairs or other work done by persons not
authorised by Siemens.
• Components on the printed circuit board
are manipulated
• The software is manipulated
• Defects or damage caused by dropping,
breaking, lightning or ingress of moisture.
This also applies if defects or damage was
caused by mechanical, chemical, radio interference or thermal factors (e.g.: microwave, sauna etc.)
• Devices fitted with accessories not authorised by Siemens
• This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any software supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evidence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee default becoming evident.
• Ownership of devices or components replaced by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the Republic of Ireland the
Guarantee is issued by Siemens Ireland
Limited, Ballymoss Road, Sandyford Industrial Estate, Dublin 18 - The Republic of
Ireland.
• Any other claims resulting out of or in connection with the device shall be excluded
from this Guarantee. Nothing in this Guarantee shall attempt to limit or exclude a
Customers Statutory Rights, nor the manufacturer’s liability for death or personal injury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detriment of the customer.
To invoke this Guarantee, please contact the
Siemens helpdesk on 1850 777 277. This
number is also to be found in the accompanying user guide.
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SAR - European Union (RTTE)
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_SAR.fm
INFORMATION ON RF EXPOSURE /
SAR SPECIFIC ABSORPTION RATE (SAR)
European
Union (RTTE) THIS MOBILE PHONE MEETS THE LIMITS SET BY THE EU (1999/519/EC)
FOR PROTECTION OF THE HEALTH
OF THE PUBLIC FROM THE EFFECTS
OF EXPOSURE TO ELECTROMAGNETIC FIELDS
These limits are part of comprehensive recommendations for the protection of the public. The recommendations were developed and
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific studies*. The limits include a substantial safety margin designed to assure
the safety of all persons, regardless
of age and health.
Before a radio equipment may be
placed on the market, compliance
with the European laws and the respective technical limit requirements must be demonstrated. Only
then the CE mark may be affixed**.
The limit for mobile phones recommended by the Council of the European Union employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. This SAR limit is 2.0 W/kg***. This corresponds
with the requirements of the International Commission for Non-Ionizing Radiation Protection ICNIRP and
was adopted into the European
Norm for Mobile Radio Equipment
EN 50360. The SAR of mobile phones is determined in accordance
83
with the European Norm EN 50361.
This involves measuring the maximum value in all frequency bands of
the mobile phone with the phone
transmitting at its highest power level. The actual SAR level of the phone during normal operation may be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
The highest SAR value for this model
phone when tested for compliance
against the norm is
0.47 W/kg****.
The SAR information can also be
found on the Siemens web site at
www.my-siemens.com
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the legal
requirements.
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzerland) states that present scientific information does not indicate the
need for any special precautions for
use of mobile phones.
Further information:
www.who.int/peh-emf, www.mmfai.org,
www.my-siemens.com
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
84
SAR - European Union (RTTE)
** The CE mark confirms that the
product is in compliance with the legal requirements of the European
Union as a prerequisite for the placing on the market and the free movement of goods within the European internal market.
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_SAR.fm
*** averaged over 10g body tissue.
**** SAR values may vary depending on national requirements and
frequency bands. SAR information
for different regions can be found at
www.my-siemens.com
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
SAR - International (ICNIRP)
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60_SAR.fm
SAR - Inter- INFORMATION ON RF EXPOSURE /
SPECIFIC ABSORPTION RATE (SAR)
national
(ICNIRP)
THIS MOBILE PHONE MEETS THE LIMITS FOR PROTECTION OF THE
HEALTH OF THE PUBLIC FROM THE
EFFECTS OF EXPOSURE TO ELECTROMAGNETIC FIELDS
85
low the maximum value. This is
because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
Your mobile phone is a radio transmitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequency (RF) energy recommended by international guidelines from the International Commission on NonIonizing Radiation Protection (ICNIRP). These limits are part of comprehensive guidelines for the protection of the public and establish
permitted levels of RF energy for the
population. The guidelines were
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific studies*. The limits include a substantial safety margin designed to assure
the safety of all persons, regardless
of age and health.
The highest SAR value for this model
phone when tested for use at the ear
is
The exposure limit for mobile phones employs a unit of measurement
known as the Specific Absorption Rate, or SAR. The SAR limit stated in the
international guidelines is 2.0 W/
kg**. Tests for SAR are conducted in
all frequency bands using standard
operating positions with the phone
transmitting at its highest power level. The actual SAR level of the phone during operation can be well be-
Further information:
www.who.int/peh-emf, www.mmfai.org,
www.my-siemens.com
0.47 W/kg***.
SAR information can also be found at
www.my-siemens.com
While there may be differences between the SAR levels of various phones and at various positions, they all
meet the international guidelines for
safe RF exposure.
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzerland) states that present scientific information does not indicate the
need for any special precautions for
use of mobile phones.
** averaged over 10g of tissue.
*** SAR values may vary depending
on national requirements and frequency bands. information for different regions can be found at
www.my-siemens.com
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
86
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60SIX.fm
Index
Index
A
Accessories................................. 79
Agenda....................................... 65
Alarm (alarm clock)..................... 67
Alarm clock................................. 67
All calls (call time/charge) ........... 29
All calls (diversion)...................... 60
All incoming (barrings) ............... 62
Answering service (external)....... 51
Antenna ....................................... 5
Any to answer ............................ 56
Appointments............................. 66
Audio ......................................... 53
Auto display, time/charges .......... 29
Auto key lock.............................. 55
Auto. network ............................ 57
Auto. redial................................. 16
B
Barring ....................................... 62
Battery
Charge...................................... 9
Insert ........................................ 8
Quality declaration.................. 80
Bearer settings............................ 58
Brightness .................................. 54
Busy number .............................. 16
C
Calculator ................................... 68
Calculator functions.................... 68
Calendar..................................... 65
Call
Accept .................................... 16
Barring.................................... 62
Charges .................................. 29
Divert ..................................... 60
End......................................... 15
Hold ....................................... 17
Menu...................................... 19
Multiparty............................... 18
Reject ..................................... 16
Call records .................................28
Call screening .............................56
Call transfer ................................18
Call waiting........................... 17, 56
Caller pictures .............................24
Calls dialled.................................28
Camera .......................................30
Care of phone .............................77
Cell broadcast .............................52
Charge rate .................................29
Charges ......................................29
Charging the battery .....................9
Clock ..........................................67
Codes ................................... 12, 56
Composer ...................................54
Connection .................................58
Connection profile ......................58
Contacts
Dial entry ................................25
Group .....................................27
New entry ...............................24
Read/change an entry ..............25
Contrast......................................54
Control code (DTMF) ...................19
Countdown.................................67
Credit limit ..................................29
CSD.............................................58
CSD settings................................58
Currency converter......................68
Customer Care ............................72
Customer care.............................72
D
Device.........................................54
Dialling codes .............................15
Dialling with number keys ...........15
Dial-up access (connection).........58
Display
Display settings .......................54
Symbols ....................................7
Divert..........................................60
Downloads..................................38
DTMF codes (control codes) ........19
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60SIX.fm
Index
E
E-mail
Attachments ........................... 48
Lists ........................................ 49
Receive/read ........................... 48
Settings .................................. 49
Write ...................................... 48
Emergency number ...................... 8
F
Factory setting............................ 55
Fast access ................................. 64
Favourites .................................. 36
Forwarding (call) ........................ 18
G
Getting started ............................. 8
GPRS .......................................... 58
Group......................................... 27
Guarantee certificate .................. 81
H
Handset volume ......................... 15
Headset (Accessories) ................. 79
Hide ID ....................................... 56
Hold call ..................................... 17
Home network............................ 57
Homepage.................................. 36
Hotline Siemens ......................... 72
I
Identity number (IMEI)................ 55
Illumination display .................... 54
IMEI number............................... 55
Inbox
E-mail ..................................... 48
MMS....................................... 45
SMS ........................................ 41
International dialling code .......... 15
Internet ...................................... 36
J
Joystick ........................................ 5
87
K
Key tones....................................53
L
Language....................................54
Li-ion battery (accessories) ..........79
Limit (call time/charge) ...............29
Logo display................................55
Loss of phone, SIM card...............78
Loudspeaker .................................5
Lower-case/
upper-case letters ................. 20, 21
M
Mailbox.......................................51
Maintenance of phone ................77
Menu
Controls ..................................11
Menu speed dialling ....................12
Message
CB ...........................................52
E-mail .....................................48
MMS .......................................44
SMS .................................. 39, 41
Microphone muting ....................19
Minute beep ...............................56
Missed calls.................................28
MMS
Lists ........................................45
Receive ...................................45
Write.......................................44
Move to archive ..........................42
Multiparty ...................................18
Muting (microphone) ..................19
N
Network
Barring ....................................62
Configuration ..........................57
Line.........................................57
Notes..........................................66
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60SIX.fm
88
Index
O
S
Operating time ........................... 78
Organiser ................................... 65
Own greeting ............................. 55
P
Safety precautions ........................3
Screensaver ................................55
Second connection......................17
Security ......................................56
Service centre (SMS) ...................43
Servicerufnummern Siemens.......72
Set date ......................................68
Set time/date ..............................68
Settings
Audio ......................................53
Connection .............................58
Device.....................................54
During calls .............................56
Internet...................................36
Network ..................................57
Security...................................56
Short message (SMS) ..................39
Shown in the display .....................7
Signal strength............................10
Silent alert ..................................53
SIM card
Clear barring ...........................13
Insert ........................................8
Problems .................................74
SIM services ................................14
SIM services (optional) ................14
SMS
Add media...............................40
Archive....................................42
Predefined text........................23
Read........................................41
Send .......................................39
Settings...................................43
T9 input ..................................21
To group .................................27
Write.......................................39
SOS...............................................8
Special characters .......................20
Phone code ................................ 12
Phone data ................................. 78
Phonebook only.......................... 56
Photo album......................... 31, 34
Picture (contacts)........................ 24
PIM............................................. 65
PIN
Control ................................... 12
Edit......................................... 13
Enter ...................................... 10
Error ....................................... 76
PIN2 ........................................... 12
Predefined text ........................... 23
Preferred network....................... 57
Preventing accidental
activation ................................... 13
Product data ............................... 78
Prompt ....................................... 16
Provider logo .............................. 55
PUK, PUK2 .................................. 12
Q
Questions & Answers .................. 74
R
Receiving data ............................ 60
Receiving fax .............................. 60
Redial ......................................... 15
Reminder.................................... 16
Reset factory setting ................... 55
Ringer setting ............................. 53
Ringtones ................................... 53
ST60 english retail, A31008-H6855-A101-1-7619 (11. December 2003,
Index
© Siemens AG 2001, I:\Mobil\ST60\retail\en\_von_itl\ST60_Retail_EN_031209\ST60SIX.fm
Speed dialling keys ..................... 64
Standby mode ............................ 10
Switch GPRS on/off ..................... 58
Switch off phone
Automatic............................... 68
Manual ................................... 10
Switch on ................................... 10
Symbols ....................................... 7
T
T9
Setting.................................... 55
Text entry ............................... 21
Word suggestions ................... 22
Take photos................................ 30
Technical data ............................ 78
Text entry without T9 ................. 20
Text module ............................... 22
This SIM only .............................. 57
Time/Charge ............................... 29
Topic list (CB) ............................. 52
89
U
Upper and lowercase
letters ................................... 20, 21
User group ..................................63
V
Validity .......................................43
Video ..........................................33
Voice command ..........................69
Voice control...............................69
Voice dialling ..............................69
Voice message ............................51
Voice ringtone ...................... 53, 70
Volume
Handset volume ......................15
Ringtone .................................53
W
Wallpaper effects ........................55
WAP profiles................................36
WAP Push Setting ........................37
World clock .................................67