AV Receiver
Owner’s Manual
Read the supplied booklet “Safety Brochure” before using the unit.
English
CONTENTS
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
8 Connecting the power cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
9 Selecting an on-screen menu language . . . . . . . . . . . . . . . . . . . . . . . . . 34
FEATURES
6
10 Optimizing the speaker settings automatically (YPAO) . . . . . . . . . 35
Checking the measurement results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
What you can do with the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Part names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Reloading the previous YPAO adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Error messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Warning messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Front display (indicators) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
PLAYBACK
40
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
PREPARATIONS
12
Basic playback procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Selecting the input source and favorite settings with one touch
(SCENE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
General setup procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Configuring scene assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
1 Placing speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Selecting the sound mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
2 Connecting speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Enjoying stereoscopic sound fields (CINEMA DSP 3D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Enjoying surround sound with headphones (SILENT CINEMA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Connecting front speakers that support bi-amp connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Enjoying unprocessed playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Input/output jacks and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Enjoying pure high fidelity sound (Pure Direct) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3 Connecting a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Enjoying compressed music with enhanced sound (Compressed Music Enhancer) . . . . . . . . . . . . . . . . . . . 47
Listening to FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
4 Connecting playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Selecting a frequency for reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Connecting video devices (such as BD/DVD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Registering favorite radio stations (presets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Connecting audio devices (such as CD players) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Radio Data System tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Connecting to the jacks on the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Operating the radio on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5 Connecting the FM/AM antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Playing back iPod music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
6 Connecting to a network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connecting an iPod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Playback of iPod content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
7 Connecting other devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Playing back music stored on a USB storage device . . . . . . . . . . . . . . . 57
Connecting recording devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Connecting a USB storage device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Connecting a device compatible with the trigger function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Playback of USB storage device contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
En
2
Playing back music stored on media servers (PCs/NAS) . . . . . . . . . . . . 60
Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Media sharing setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
ECO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Playback of PC music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Listening to Internet radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Viewing information about the unit (Information menu) . . . . . . . . . . 97
Playing back iTunes/iPod music via a network (AirPlay) . . . . . . . . . . . 65
Playback of iTunes/iPod music contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Playing back music in multiple rooms (multi-zone) . . . . . . . . . . . . . . . . 67
Preparing Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Controlling Zone2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Types of information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Configuring the system settings (ADVANCED SETUP menu) . . . . . . . 99
ADVANCED SETUP menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Changing the speaker impedance setting (SP IMP.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Selecting the remote control ID (REMOTE ID) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Switching the video signal type (TV FORMAT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Viewing the current status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Removing the limitation on HDMI video output (MON.CHK) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Switching information on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Restoring the default settings (INIT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Viewing the status information on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Updating the firmware (UPDATE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Configuring playback settings for different playback sources
(Option menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Controlling external devices with the remote control . . . . . . . . . . . . 102
Option menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Registering the remote control code for a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Checking the firmware version (VERSION) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Registering the remote control codes for playback devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
CONFIGURATIONS
75
Configuring input sources (Input menu) . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Input menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Resetting remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Updating the unit’s firmware via the network . . . . . . . . . . . . . . . . . . . 105
APPENDIX
106
Configuring the SCENE function (Scene menu) . . . . . . . . . . . . . . . . . . . . 77
Scene menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Configuring sound programs/surround decoders
(Sound Program menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Sound Program menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109
Configuring various functions (Setup menu) . . . . . . . . . . . . . . . . . . . . . . 82
Setup menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Speaker (Manual Setup) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Power, system and remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110
FM/AM radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
USB and network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Error indications on the front display . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Ideal speaker layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Multi Zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Audio information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115
En
3
HDMI and video information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Yamaha technologies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Video signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Information on HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
HDMI Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
HDMI signal compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
En
4
Accessories
Operating range of the remote control
Check that the following accessories are supplied with the product.
• Point the remote control at the remote control sensor on the unit and remain within the operating range
shown below.
 Remote control
 Batteries (AAA, R03, UM-4) (x2)
Within
6 m (20 ft)
30°
30°
Insert the batteries the right
way round.
 AM antenna
 FM antenna
*One of the above is supplied depending on the region of
purchase.
 YPAO microphone
 CD-ROM (Owner’s Manual)
• Some features are not available in certain regions.
• Due to product improvements, specifications and appearance are subject to change without notice.
• This manual explains operations using the supplied remote control.
 Easy Setup Guide
 Safety Brochure
• This manual describes all the “iPod”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod”, “iPhone”
and “iPad”, unless otherwise specified.
•
indicates precautions for use of the unit and its feature limitations.
•
indicates supplementary explanations for better use.
Accessories
En
5
FEATURES
What you can do with the unit
Wide variety of supported content
• iPod/iPhone/iPad
. p.53
• USB
. p.57
• Media server (PC/NAS)
. p.60
• Internet radio
. p.63
• AirPlay
. p.65
Supports 2- to 7.1-channel (plus presence)
speaker system. Allows you to enjoy your favorite
acoustic spaces in various styles.
• Automatically optimizing the speaker . p.35
settings to suit your room (YPAO)
• Reproducing stereo or multichannel . p.43
sounds with the sound fields like
actual movie theaters and concert halls
(CINEMA DSP)
• Enjoying compressed music with
. p.47
enhanced sound (Compressed Music
Enhancer)
• Playing back music in multiple rooms . p.67
(multi-zone)
Network contents
Control
Speakers
Audio
iPod/iPhone/iPad
Audio
HDMI Control
USB device
3D and 4K signals supported
Audio
HDMI Control
Audio/Video
BD/DVD player
Audio/Video
TV
AV receiver (the unit)
Control
Audio/Video
(via HDMI/MHL)
Smartphone/Tablet
Change the input source
and favorite settings with
one touch (SCENE)
. p.41
Sequential operation of a TV,
AV receiver, and BD/DVD
player (HDMI Control)
TV remote control
. p.119
FEATURES ➤ What you can do with the unit
En
6
Full of useful functions!
Useful tips
❑ Connecting various devices (p.26)
❑ Creating 3-dimensional sound fields (p.43)
A number of HDMI jacks and various input/output jacks
on the unit allow you to connect video devices (such as
BD/DVD players), audio devices (such as CD players),
game consoles, camcorders, and other devices.
Connecting presence speakers allows you to create a
natural 3-dimensional sound field in your own room
(CINEMA DSP 3D). Even when no presence speakers
are connected, the Virtual Presence Speaker (VPS)
function produces 3D surround sound.
The combination of video/audio input jacks does not
match an external device...
Use “Audio In” in the “Input” menu to change the
combination of video/audio input jacks so that it matches
the output jack(s) of your external device (p.27).
Video and audio are not synchronized...
Use “Lipsync” in the “Setup” menu to adjust the delay
between video and audio output (p.88).
BD/DVD
player
I want to hear audio from the TV speakers...
Use “Audio Output” in the “Setup” menu to select the
output destination of signals input into the unit (p.91).
Your TV speakers may be selected as an output
destination.
Set-top box
Game
console
Camcorder
I want to use the supplied remote control to operate
external devices…
TV
Register the remote control codes of the external
devices (such as a TV and BD/DVD players) (p.102).
❑ Playing back TV audio in surround sound
with a single HDMI cable connection
(Audio Return Channel: ARC) (p.21)
When using an ARC-compatible TV, you only need one
HDMI cable to enable video output to the TV, audio
input from the TV, and the transmission of HDMI Control
signals.
HDMI Control
TV audio
Video from
external device
❑ Easy operation and wireless music
playback from iPhone or Android device
By using the application for smartphone/tablet “AV
CONTROLLER”, you can control the unit from an
iPhone, iPad, iPod touch or Android devices. Visit the
Yamaha website for details.
I want to change the on-screen menu language...
❑ Listening to FM/AM radio (p.48)
Use “Language” in the “Setup” menu to select a
language from English, Japanese, French, German,
Spanish, Russian, Italian and Chinese (p.34).
The unit is equipped with a built-in FM/AM tuner. You
can register up to 40 favorite radio stations as presets.
I want to update the firmware...
❑ Enjoying pure high fidelity sound (p.47)
When the Pure Direct mode is enabled, the unit plays
back the selected source with the least circuitry, which
lets you to enjoy Hi-Fi sound quality.
❑ Easy operation with a TV screen
You can navigate through different types of content
(such as iPod, USB, and network), view information, or
easily configure the settings using the on-screen menu.
❑ Low power consumption
The ECO mode (power saving function) reduces the
unit’s power consumption (p.96).
Use “UPDATE” in the “ADVANCED SETUP” menu to
update the unit’s firmware (p.100). If the unit is
connected to the Internet, a message will be displayed
on the TV when a firmware update is available (p.105).
Many other settings are available that let you to
customize the unit. For details, see the following pages.
• Input settings (p.75)
• SCENE settings (p.78)
• Sound program and surround decoder settings (p.80)
• Various function settings (p.83)
• Information view (such as audio signal and video
signal) (p.98)
• System settings (p.99)
FEATURES ➤ What you can do with the unit
En
7
Part names and functions
Front panel
1
23
MAIN ZONE
4
56 7 8
9
: A
B
C
YPAO MIC
PURE DIRECT
ZONE 2
ZONE CONTROL
MEMORY
INFO
PRESET
FM
AM
TUNING
VOLUME
SCENE
BD
DVD
PHONES
INPUT
TV
TONE CONTROL
NET
PROGRAM
RADIO
STRAIGHT
SILENT CINEMA
D
1 MAIN ZONE z key
Turns on/off (standby) the unit.
2 Standby indicator
Lights up when the unit is in standby mode under any of the
following conditions.
• HDMI Control is enabled (p.90)
• Standby Through is enabled (p.91)
• Network Standby is enabled (p.92)
• An iPod is being charged (p.53)
3 YPAO MIC jack
For connecting the supplied YPAO microphone (p.35).
4 ZONE 2 key
Enables/disables the audio output to Zone2 (p.70).
5 Remote control sensor
Receives remote control signals (p.5).
6 ZONE CONTROL key
Changes the zone (main zone or the Zone2) that is controlled
by the keys and knobs on the front panel (p.70).
7 INFO key
Selects the information displayed on the front display (p.71).
VIDEO AUX
HDMI/
MHL 5V 1A
E
F G H
I
J
VIDEO
5V
2.1A
K
8 MEMORY key
Registers FM/AM radio stations as preset stations (p.49).
9 PRESET keys
Select a preset FM/AM radio station (p.49).
0 FM and AM keys
Switch between FM and AM (p.48).
A Front display
Displays information (p.9).
B TUNING keys
Select the radio frequency (p.48).
C PURE DIRECT key
Enables/disables Pure Direct (p.47).
D PHONES jack
For connecting headphones.
E INPUT keys
Select an input source.
F TONE CONTROL key
Adjusts the high-frequency range and low-frequency range
of output sounds (p.73).
L
G SCENE keys
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.41).
H PROGRAM keys
Select a sound program or a surround decoder (p.42).
I STRAIGHT key
Enables/disables the straight decode mode (p.46).
J VIDEO AUX (HDMI/MHL IN) jack
For connecting a device, such as a camcorder and a game
console (p.29) or a smartphone (p.30).
K USB jack
For connecting a USB storage device (p.57) or an iPod
(p.53).
VIDEO jack
For inputting video when “USB” is selected as the input
source (p.53).
L VOLUME knob
Adjusts the volume.
FEATURES ➤
Part names and functions
En
8
Front display (indicators)
1
2
3
4
5
ENHANCER ADAPTIVE DRC
STEREO
3 TUNED
OUT
6
78
SLEEP
ZONE
2
9
VOL.
MUTE
SW
PL
PR
C
L
R
SL
SR
SBL SB SBR
@
1 HDMI
Lights up when HDMI signals are being input or output.
OUT
Lights up when HDMI signals are being output.
2 CINEMA DSP
Lights up when CINEMA DSP (p.43) is working.
CINEMA DSP n
Lights up when CINEMA DSP 3D (p.43) is working.
3 ENHANCER
Lights up when Compressed Music Enhancer (p.47) is
working.
4 ADAPTIVE DRC
Lights up when Adaptive DRC (p.73) is working.
5 STEREO
A
6 SLEEP
Lights up when the sleep timer is on.
7 ZONE2
Lights up when audio output to Zone2 is enabled (p.70).
8 MUTE
Blinks when audio is muted.
9 Volume indicator
Indicates the current volume.
0 Cursor indicators
Indicate the remote control cursor keys currently operational.
A Information display
Displays the current status (such as input name and sound
mode name). You can switch the information by pressing
INFO (p.71).
@
B
B Speaker indicators
Indicate speaker terminals from which signals are output.
A Front speaker (L)
S Front speaker (R)
D Center speaker
F Surround speaker (L)
G Surround speaker (R)
H Surround back speaker (L)
J Surround back speaker (R)
K Surround back speaker
Z Presence speaker (L)
X Presence speaker (R)
L Subwoofer
Lights up when the unit is receiving a stereo FM radio signal.
TUNED
Lights up when the unit is receiving an FM/AM radio station
signal.
FEATURES ➤
Part names and functions
En
9
Rear panel
5
1 2 3 4
7
6
8
9
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
HDMI 2
HDMI 3
HDMI 4
HDMI 5
(BD/DVD)
IN
ARC
OUT
EXTRA SP
REMOTE
OPTICAL
AM
VIDEO
FM
(TV)
AV4
ZONE2/F.PRESENCE
COMPONENT
VIDEO
COAXIAL
(RADIO)
PR
ANTENNA
AV3
Y
PR
PB
PB
AV2
VIDEO
VIDEO
FRONT
CENTER
SURROUND
SURROUND BACK/BI-AMP
OPTICAL
Y
AV 1
MONITOR OUT
COMPONENT VIDEO
SINGLE
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
@A B C D
1 REMOTE IN/OUT jacks
For connecting to an infrared signal receiver/emitter that
allows you to operate the unit and other devices from another
room (p.69).
2 TRIGGER OUT jack
For connecting to a device that supports the trigger function
(p.32).
3 DC OUT jack
For connecting to an optional accessory.
4 NETWORK jack
For connecting to a network (p.31).
5 HDMI OUT jack
For connecting to an HDMI-compatible TV and outputting
video/audio signals (p.21). When using ARC, TV audio signal
can also be input through the HDMI OUT jack.
SUBWOOFER
PRE OUT
* The area around the video/audio output jacks is
marked in white on the actual product to prevent
improper connections.
E
6 ANTENNA jacks
For connecting to FM and AM antennas (p.30).
7 HDMI 1–5 jacks
For connecting to HDMI-compatible playback devices and
inputting video/audio signals (p.26).
8 SPEAKERS terminals
For connecting to speakers (p.17).
9 Power cable
For connecting to an AC wall outlet (p.33).
0 AUDIO 1–2 jacks
For connecting to audio playback devices and inputting
audio signals (p.29).
A AV 1–6 jacks
For connecting to video/audio playback devices and
inputting video/audio signals (p.26).
B AV OUT jacks
For outputting video/audio to a recording device (such as a
VCR) (p.32).
C ZONE2 OUT jacks
For connecting to the external amplifier used in Zone2 and
for outputting audio (p.68).
D MONITOR OUT jacks
COMPONENT VIDEO jacks
For connecting to a TV that supports component video and
outputting video signals (p.25).
VIDEO jack
For connecting to a TV that supports composite video and
outputting video signals (p.25).
E SUBWOOFER PRE OUT 1–2 jacks
For connecting to a subwoofer with built-in amplifier (p.19).
FEATURES ➤
Part names and functions
En
10
Remote control
1 Remote control signal transmitter
1
Transmits infrared signals.
2 SOURCE z key
2
RECEIVER
SOURCE
Turns on/off an external device.
SOURCE key
HDMI
1
2
3
4
5
3
Sets the remote control to operate external devices (p.103).
This key lights up in green after pressed.
V-AUX
RECEIVER key
AV
1
2
3
4
Sets the remote control to operate the unit (p.103). This key
lights up in orange after pressed.
AUDIO
4
5
5
6
1
TUNER
USB
NET
MAIN
SCENE
BD
DVD
TV
7
TOP MENU
NET
MUTE
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
9
G
H
I
DISPLAY
J
BAND
TUNING
PRESET
SUR. DECODE STRAIGHT
MUSIC
INFO
SLEEP
2
5
6
5 SCENE keys
6 PROGRAM keys
ENHANCER PURE DIRECT
1
Changes the zone (main zone or Zone2) that is controlled by
the remote control (p.70).
Select the registered input source, sound program, and
various settings with one touch. Also, turns on the unit when
it is in standby mode (p.41).
MODE
MOVIE
Select an input source for playback.
HDMI 1–5 HDMI 1–5 jacks
V-AUX
VIDEO AUX jack (on the front panel)
AV 1–6
AV 1–6 jacks
AUDIO 1–2 AUDIO 1–2 jacks
TUNER
FM/AM radio
USB
USB jack (on the front panel)
NET
NETWORK jack (press repeatedly to select a
desired network source)
★
Changes the external device to be controlled
without switching the input source.
4 MAIN/ZONE2 switch
ENTER
RETURN
B
C
D
E
Turns on/off (standby) the unit.
3 Input selection keys
PROGRAM
:
A
RECEIVER z key
ZONE 2
6
8
2
Select a sound program (p.42).
3
4
7
8
7 External device operation keys
Select menus for external devices (p.103).
MEMORY
9
10
0
8 ON SCREEN key
ENT
TV
F
Displays the on-screen menu on the TV.
INPUT
TV VOL
MUTE
TV CH
CODE SET
K
9 Menu operation keys
Cursor keys Select a menu or a parameter.
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
0 MODE key
Switches the iPod operation modes (p.55).
A Radio keys
Operate the FM/AM radio when “TUNER” is selected as the
input source (p.48).
BAND
Switches between FM and AM radio.
PRESET
Select a preset station.
TUNING
Select the radio frequency.
External device operation keys
Let you play back and perform other operations for external
devices when an input source other than “TUNER” is
selected (p.103).
B Sound mode keys
Select a sound mode (p.42).
C INFO key
Selects the information displayed on the front display (p.71).
D SLEEP key
Switches the unit to standby mode automatically after a
specified period of time has elapsed (sleep timer). Press
repeatedly to set the time (120 min, 90 min, 60 min, 30 min, off).
E Numeric keys
Let you enter numerical values, such as radio frequencies.
MEMORY key
Registers FM/AM radio stations as presets (p.49).
F TV operation keys
Let you select TV input and volume, and perform other TV
operations (p.102).
G VOLUME keys
Adjust the volume.
H MUTE key
Mutes the audio output.
I OPTION key
Displays the option menu (p.72).
J DISPLAY key
Displays status information on the TV (p.71).
K CODE SET key
Registers remote control codes of external devices on the
remote control (p.102).
• To operate external devices with the remote control, register a
remote control code for each device before using (p.102).
FEATURES ➤
Part names and functions
En
11
PREPARATIONS
General setup procedure
1 Placing speakers (p.13)
Select the speaker layout for the number of speakers that you are using and place them in your room.
2 Connecting speakers (p.17)
Connect the speakers to the unit.
3 Connecting a TV (p.21)
Connect a TV to the unit.
4 Connecting playback devices (p.26)
Connect video devices (such as BD/DVD players) and audio devices (such as CD players) to the unit.
5 Connecting the FM/AM antennas (p.30)
Connect the supplied FM/AM antennas to the unit.
6 Connecting to a network (p.31)
Connect the unit to a network.
7 Connecting other devices (p.32)
Connect external devices, such as recording devices.
8 Connecting the power cable (p.33)
After all the connections are complete, plug in the power cable.
9
Selecting an on-screen menu language
(p.34)
Select the desired on-screen menu language (default: English).
10
Optimizing the speaker settings
automatically (YPAO) (p.35)
Optimize the speaker settings, such as volume balance and acoustic parameters, to suit your room
(YPAO).
This completes all the preparations. Enjoy playing movies, music, radio and other content with the unit!
PREPARATIONS
➤ General setup procedure
En
12
1 Speaker placement 2 3 4 5 6 7 8 9 10
1 Placing speakers
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit’s speaker impedance to “6  MIN”. In this case, you can also use 4-ohm speakers as the front speakers.
For details, see “Setting the speaker impedance” (p.16).
Speaker system (the number of channels)
Speaker type
Front (L)
Abbr.
1
Front (R)
2
Center
3
Surround (L)
4
Surround (R)
5
Surround back (L)
6
Surround back (R)
7
Surround back
8
Presence (L)
Q
Presence (R)
W
Subwoofer
Function
9
Produce front right/left channel sounds (stereo sounds).
Produces center channel sounds (such as movie dialogue and vocals).
Produce surround right/left channel sounds. Surround speakers also produce surround back channel
sounds when no surround back speakers are connected.
Produce surround back left/right channel sounds.
7.1+2
7.1
7.1
6.1
5.1
Front
5.1
4.1
3.1
2.1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Produces sounds mixed from surround back left/right channel sounds.
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.43), the presence speakers
create a natural 3-dimensional sound field in your room.
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
This channel is counted as “0.1”. You can connect 2 subwoofers (with built-in amplifier) to the unit.
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
• For information on the ideal speaker layout, see “Ideal speaker layout” (p.114).
• If you have seven speakers, use two of them as surround back speakers or presence speakers.
To reinforce the rear right/left sounds, use them as surround back speakers.
To create a natural 3-dimensional sound field, use them as presence speakers.
• Two subwoofers connected to the unit output the same sounds.
PREPARATIONS
➤ Placing speakers
En
13
1 Speaker placement 2 3 4 5 6 7 8 9 10
7.1+2-channel system
7.1-channel system (using surround back speakers)
Q
W
1
9
1
2
3
4
5
6
7
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and also allows you to
enjoy extended surround sounds using the surround back speakers.
6.1-channel system
W
1
4
5
6
7.1-channel system (using presence speakers)
Q
3
4
7
• The surround back speakers and presence speakers do not produce sounds simultaneously. The unit
automatically changes the speakers to be used, depending on the selected CINEMA DSP (p.43).
9
9
9
2
1
2
9
3
5
2
3
4
5
8
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and is suited for enjoying 5.1-channel contents.
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and also allows you to
enjoy extended surround sounds using the surround back speaker.
PREPARATIONS
➤ Placing speakers
En
14
1 Speaker placement 2 3 4 5 6 7 8 9 10
5.1-channel system
4.1-channel system
1
9
2
1
3
2
9
4
5
This speaker system creates Virtual Presence Speaker (VPS) using the front, center and
surround speakers to produce a 3-dimensional sound field, and is suited for enjoying
5.1-channel contents.
4
5
2.1-channel system
Front 5.1-channel system
1
Q
W
1
9
2
9
2
3
Even when no surround speakers are connected, the unit creates the virtual surround
speakers using the front speakers to allow you to enjoy multi-channel surround sound
(Virtual CINEMA DSP).
This speaker system uses the front presence speakers to produce a natural
3-dimensional sound field, and creates the virtual surround speakers using the front
speakers to allow you to enjoy multi-channel surround sound (Virtual CINEMA DSP).
• Add the center speaker to configure a 3.1-channel system.
PREPARATIONS
➤ Placing speakers
En
15
1 Speaker placement 2 3 4 5 6 7 8 9 10
■ Setting the speaker impedance
Under its default settings, the unit is configured for 8-ohm speakers. When connecting
6-ohm speakers, set the speaker impedance to “6  MIN”. In this case, you can also
use 4-ohm speakers as the front speakers.
1
Before connecting speakers, connect the power cable to an AC wall
outlet.
2
While holding down STRAIGHT on the front panel, press
MAIN ZONE z.
MAIN ZONE z
STRAIGHT
3
Check that “SP IMP.” is displayed on the front display.
SPIMP.8MIN
4
5
Press STRAIGHT to select “6  MIN”.
Press MAIN ZONE z to set the unit to standby mode and remove the
power cable from the AC wall outlet.
You are now ready to connect the speakers.
PREPARATIONS
➤ Placing speakers
En
16
1 2 Speaker connections 3 4 5 6 7 8 9 10
2 Connecting speakers
Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 7.1+2-,
7.1-, and 6.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 6.1-channel system.
7.1+2-channel system
Caution
7.1-channel system
(using surround back speakers)
EXTRA SP
EXTRA SP
ZONE2/F.PRESENCE
ZONE2/F.PRESENCE
The unit (rear)
• Remove the unit’s power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
The unit (rear)
SPEAKERS
SPEAKERS
CLASS 2 WIRING CABLAGE CLASSE 2
FRONT
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit’s metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, “Check SP Wires” will appear on the front
display when the unit is turned on.
CENTER
SURROUND
CLASS 2 WIRING CABLAGE CLASSE 2
FRONT
SURROUND BACK/BI-AMP
CENTER
SURROUND
SURROUND BACK/BI-AMP
SINGLE
SUBWOOFER
PRE OUT
SINGLE
SUBWOOFER
PRE OUT
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
+
–
+
–
Audio pin cable (two for connecting two subwoofers)
Q
W
1
9
2
3
1
9
4
5
6
7
9
2
3
4
5
6
7
PREPARATIONS ➤ Connecting speakers
En
17
1 2 Speaker connections 3 4 5 6 7 8 9 10
7.1-channel system
(using presence speakers)
■ Connecting speaker cables
6.1-channel system
EXTRA SP
EXTRA SP
ZONE2/F.PRESENCE
ZONE2/F.PRESENCE
The unit (rear)
SPEAKERS
CLASS 2 WIRING CABLAGE CLASSE 2
CENTER
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable and twist the bare wires of
the cable firmly together.
The unit (rear)
SPEAKERS
CLASS 2 WIRING CABLAGE CLASSE 2
FRONT
Speaker cables have two wires. One is for connecting
the negative (-) terminal of the unit and the speaker, and
the other is for the positive (+) terminal. If the wires are
colored to prevent confusion, connect the black wire to
the negative and the other wire to the positive terminal.
SURROUND
FRONT
SURROUND BACK/BI-AMP
CENTER
SURROUND
SURROUND BACK/BI-AMP
SINGLE
SUBWOOFER
PRE OUT
SINGLE
b Loosen the speaker terminal.
c Insert the bare wires of the cable into the gap on the side
(upper right or bottom left) of the terminal.
SUBWOOFER
PRE OUT
d Tighten the terminal.
+ (red)
b
c
FR
ON
T
d
Q
W
1
a
- (black)
2
1
2
Using a banana plug
(U.S.A. and Australia models only)
9
3
9
a Tighten the speaker terminal.
3
b Insert a banana plug into the end of the terminal.
4
5
4
5
8
Banana plug
a
FR
ON
T
b
When using only one surround back speaker, connect it
to the SINGLE jack (L side).
PREPARATIONS ➤ Connecting speakers
En
18
1 2 Speaker connections 3 4 5 6 7 8 9 10
Push-type speaker terminals
a Remove approximately 10 mm (3/8”) of insulation from
the ends of the speaker cable, and twist the bare wires of
the cable firmly together.
b Press down the tab.
c Insert the bare wires of the cable into the hole in the
terminal.
d Release the tab.
a
Connecting front speakers that
support bi-amp connections
When using front speakers that support bi-amp
connections, connect them to the FRONT jacks and
SURROUND BACK/BI-AMP jacks.
To enable the bi-amp function, set “Power Amp Assign”
(p.85) in the “Setup” menu to “5ch BI-AMP” after
connecting the power cable to an AC wall outlet.
Caution
• Before making bi-amp connections, remove any brackets or
cables that connect a woofer with a tweeter. Refer to the
instruction manual of the speakers for details. If you are not
making bi-amp connections, make sure that the brackets or
cables are connected before connecting the speaker cables.
• Surround back speakers cannot be used during bi-amp
connections.
ZO EXT
NE RA
2/F SP
.PR
ES
E
NC
E
d
b
c
EXTRA SP
+ (red)
ZONE2/F.PRESENCE
The unit (rear)
- (black)
SPEAKERS
CLASS 2 WIRING CABLAGE CLASSE 2
FRONT
CENTER
SURROUND
SURROUND BACK/BI-AMP
■ Connecting the subwoofer
Use an audio pin cable to connect the subwoofer.
SINGLE
SUBWOOFER
PRE OUT
Audio pin cable
1
2
3
9
4
5
• The FRONT jacks and SURROUND BACK/BI-AMP/ZONE B jacks
output the same signals.
PREPARATIONS ➤ Connecting speakers
En
19
Input/output jacks and cables
■ Video/audio jacks
■ Video jacks
■ Audio jacks
❑ HDMI jacks
❑ COMPONENT VIDEO jacks
❑ OPTICAL jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
Transmit video signals separated into three
components: luminance (Y), chrominance blue (PB),
and chrominance red (PR). Use a component video
cable with three plugs.
Transmit digital audio signals. Use a digital optical
cable. Remove the tip protector (if available) before
using the cable.
HDMI cable
Digital optical cable
Component video cable
OPTICAL
❑ COAXIAL jacks
• Use a 19-pin HDMI cable with the HDMI logo. We recommend using
a cable less than 5.0 m (16.4 ft) long to prevent signal quality
degradation.
Transmit digital audio signals. Use a digital coaxial
cable.
Digital coaxial cable
T
TOR OU
• The unit’s HDMI jacks support the HDMI Control, Audio Return
Channel (ARC), and 3D and 4K video transmission features.
• Use high speed HDMI cables to enjoy 3D or 4K videos.
❑ HDMI/MHL jack
Transmits digital video and digital sound. Use an MHL
cable.
COAXIAL
❑ VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Video pin cable
❑ AUDIO jacks
Transmit analog stereo audio signals. Use a stereo pin
cable (RCA cable).
MHL cable
Stereo pin cable
• The VIDEO AUX jack on the front panel of the unit supports both
HDMI and MHL connections. Use a cable that matches the jack on
your MHL-compatible mobile device. When connecting an
HDMI-compatible playback device to the VIDEO AUX jack, use an
HDMI cable. For details on an MHL connection, see “MHL
connection” (p.30).
PREPARATIONS ➤
Input/output jacks and cables
En
20
1 2 3 TV connection 4 5 6 7 8 9 10
3 Connecting a TV
Connect a TV to the unit so that video input to the unit can be output to the TV.
You can also enjoy playback of TV audio on the unit.
■ Connection Method 1 (HDMI Control/ARC-compatible TV)
Connect the TV to the unit with an HDMI cable.
The connection method varies depending on the functions and video input jacks
available on your TV.
Refer to the instruction manual of the TV and choose a connection method.
Does your TV support
Audio Return Channel (ARC)?
Yes
• The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.90) in the “Setup” menu.
• Use an HDMI cable that supports ARC.
■ Connection Method 1 (p.21)
HDMI OUT (ARC) jack
The unit (rear)
HDMI OUT
No
HDMI input
(ARC-compatible)
TRIGGER OUT
12V 0.1A
ARC
DC OUT
5V 0.5A
Does your TV support
HDMI Control?
NETWORK
H
HDMI OUT
(NET)
(BD
IN
Yes
■ Connection Method 2 (p.23)
HDMI
HDMI
ARC
OUT
ARC
REMOTE
OPTICAL
AM
VIDEO
FM
HDMI
(TV)
AV4
COAXIAL
(RADIO)
ANTENNA
AV3
Y
No
AV2
VIDEO
VIDE
OPTICAL
AV 1
Does your TV have an
HDMI input jack?
PR
PB
MO
COMPONENT VIDEO
Yes
■ Connection Method 3 (p.24)
AUDIO 1
AUDIO 2
ZONE
AV 5
AV 6
AV OUT
ZONE O
TV
No
■ Connection Method 4 (p.25)
About HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV
that supports HDMI Control to the unit with an HDMI cable, you can control the unit’s
power and volume with the TV’s remote control. You can also control playback
devices (such as an HDMI Control-compatible BD/DVD player) connected to the
unit with an HDMI cable. For details, see “HDMI Control” (p.119).
• By connecting a TV to the unit with an HDMI cable, any video input to the unit can be output to the TV
(except some component video signals), regardless of the method used to connect the video device to the
unit. For details, see “Video signal flow” (p.118).
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
About Audio Return Channel (ARC)
ARC allows audio signals to travel both ways under HDMI Control. If you connect a
TV that supports HDMI Control and ARC to the unit with a single HDMI cable, you
can output video/audio to the TV or input TV audio to the unit.
PREPARATIONS ➤ Connecting a TV
En
21
1 2 3 TV connection 4 5 6 7 8 9 10
❑ Necessary settings
To use HDMI Control and ARC, you need to configure the following settings.
3
Configure the settings for HDMI Control.
For details on settings and operating your TV, refer to the instruction manual for the TV.
a Enable HDMI Control on the TV and playback devices (such as HDMI
Control-compatible BD/DVD player).
1
After connecting external devices (such as a TV and playback devices)
and the power cable to the unit, turn on the unit, TV, and playback devices.
b Turn off the TV’s main power and then turn off the unit and playback devices.
2
Configure the settings of the unit.
c Turn on the unit and playback devices and then turn on the TV’s main power.
d Switch the TV input to display video from the unit.
a Check that ARC is enabled on the TV.
b Switch the TV input to display video from the unit.
c Press ON SCREEN.
ON
SCREEN
RETURN
On the unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
OPTION
ON SCREEN
Cursor keys
ENTER
ENTER
e Check the following.
DISPLAY
d Use the cursor keys to select “Setup” and press ENTER.
f Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
If you cannot hear the TV’s audio, check that “ARC” (p.91) in the “Setup” menu is set to
“On”.
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• If the audio is interrupted while using ARC, set “ARC” (p.91) in the “Setup” menu to “Off” and use a digital
optical cable to input TV audio to the unit (p.23).
e Use the cursor keys (e/r) to select “HDMI”.
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks,
use “TV Audio Input” (p.90) in the “Setup” menu to change the TV audio input assignment. To use the
SCENE function (p.41), you also need to change the input assignment for SCENE(TV).
f Use the cursor keys (q/w) to select “HDMI Control” and press ENTER.
g Use the cursor keys to select “On”.
h Press ON SCREEN.
PREPARATIONS ➤ Connecting a TV
En
22
1 2 3 TV connection 4 5 6 7 8 9 10
■ Connection Method 2 (HDMI Control-compatible TV)
❑ Necessary settings
Connect the TV to the unit with an HDMI cable and a digital optical cable.
To use HDMI Control, you need to configure the following settings.
For details on settings and operating your TV, refer to the instruction manual for the TV.
• The following explanation is based on the assumption that you have not changed the “HDMI” parameters
(p.90) in the “Setup” menu.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit, TV, and
playback devices.
2
Configure the settings of the unit.
HDMI OUT jack
The unit (rear)
HDMI OUT
HDMI input
TRIGGER OUT
12V 0.1A
ARC
DC OUT
5V 0.5A
NETWORK
HD
HDMI OUT
(NET)
(BD
IN
HDMI
HDMI
ARC
OUT
OPTICAL
AM
VIDEO
FM
HDMI
(TV)
AV4
COAXIAL
a Switch the TV input to display video from the unit.
b Press ON SCREEN.
REMOTE
(RADIO)
ANTENNA
AV3
Y
AV 4 (OPTICAL) jack
PR
PB
OPTICAL
AV2
OPTICAL
AV 1
VIDEO
ON
SCREEN
OPTION
VIDE
O
(TV)
AV4
MO
COMPONENT VIDEO
ON SCREEN
Cursor keys
ENTER
ENTER
OPTICAL
O
AUDIO 1
AUDIO 2
RETURN
DISPLAY
ZONE
AV 5
AV 6
AV OUT
ZONE O
TV
Audio output
(digital optical)
c Use the cursor keys to select “Setup” and press ENTER.
• By connecting a TV to the unit with an HDMI cable, any video input to the unit can be output to the TV
(except some component video signals), regardless of the method used to connect the video device to the
unit. For details, see “Video signal flow” (p.118).
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
d Use the cursor keys (e/r) to select “HDMI”.
e Use the cursor keys (q/w) to select “HDMI Control” and press ENTER.
f Use the cursor keys to select “On”.
g Press ON SCREEN.
PREPARATIONS ➤ Connecting a TV
En
23
1 2 3 TV connection 4 5 6 7 8 9 10
3
Configure the settings for HDMI Control.
a Enable HDMI Control on the TV and playback devices (such as a HDMI
Control-compatible BD/DVD player).
b Turn off the TV’s main power and then turn off the unit and playback devices.
c Turn on the unit and playback devices and then turn on the TV.
■ Connection Method 3 (TV with HDMI input jacks)
Connect the TV to the unit with an HDMI cable and a digital optical cable.
HDMI OUT jack
The unit (rear)
HDMI OUT
ARC
DC OUT
5V 0.5A
NETWORK
H
HDMI OUT
(NET)
(BD
IN
d Switch the TV input to display video from the unit.
HDMI input
TRIGGER OUT
12V 0.1A
HDMI
HDMI
ARC
OUT
REMOTE
e Check the following.
OPTICAL
AM
VIDEO
HDMI
COAXIAL
On the unit: The input to which the playback device is connected is selected. If not,
select the input source manually.
On the TV: The video from the playback device is displayed.
f Check that the unit is properly synchronized with the TV by turning off the TV or
adjusting the TV volume with the TV remote control.
This completes the necessary settings.
If you select a TV program with the TV remote control, the input source of the unit will be
automatically switched to “AV 4” and the TV audio will be played back on the unit.
• If HDMI Control does not work properly, try turning off and on (or unplugging and then plugging in again)
the devices. It may solve the problem.
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
• “AV 4” is set as TV audio input at the factory. If you have connected any external device to the AV 4 jacks or
if you want to use another input jack (other than OPTICAL) for connecting the TV, use “TV Audio Input”
(p.90) in the “Setup” menu to change the TV audio input assignment. To use the SCENE function (p.41),
you also need to change the input assignment for SCENE(TV).
FM
(TV)
AV4
(RADIO)
ANTENNA
AV3
Y
AV 4 (OPTICAL) jack
PR
PB
OPTICAL
AV2
OPTICAL
AV 1
VIDEO
VIDE
O
(TV)
AV4
MO
COMPONENT VIDEO
OPTICAL
O
AUDIO 1
AUDIO 2
ZONE
AV 5
AV 6
AV OUT
ZONE O
TV
Audio output
(digital optical)
If you switch the input source of the unit to “AV 4” using the AV 4 or SCENE(TV) keys,
the TV audio will be played back on the unit.
• By connecting a TV to the unit with an HDMI cable, any video input to the unit can be output to the TV
(except some component video signals), regardless of the method used to connect the video device to the
unit. For details, see “Video signal flow” (p.118).
• By connecting a TV to the unit with an HDMI cable, you can navigate the iPod, USB storage device and
network sources, or configure the settings of the unit with the menu displayed on the TV.
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO 1–2 jacks. To use
the SCENE function (p.41), you also need to change the input assignment for SCENE(TV).
PREPARATIONS ➤ Connecting a TV
En
24
1 2 3 TV connection 4 5 6 7 8 9 10
■ Connection Method 4 (TV without HDMI input jacks)
When connecting any video device to the AV 1–2 (COMPONENT VIDEO) jacks of the
unit, connect the TV to the MONITOR OUT (COMPONENT VIDEO) jacks.
When connecting any video device to the AV 3–6 (VIDEO) jacks or the front VIDEO jack
of the unit, connect the TV to the MONITOR OUT (VIDEO) jack.
If you select “AV 4” as the input source by pressing AV 4 or SCENE(TV), the TV audio
will be played back on the unit.
❑ VIDEO (composite video) connection (with a video pin cable)
MONITOR OUT
(VIDEO) jack
The unit (rear)
Video input
(composite video)
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
H
(BD/DVD)
IN
VIDEO
ARC
OUT
VIDEO
REMOTE
OPTICAL
AM
VIDEO
FM
(TV)
AV4
COMPONENT
VIDEO
COAXIAL
(RADIO)
ANTENNA
MONITOR
V
V
PR
AV3
Y
PR
PB
PB
OPTICAL
AV2
OPTICAL
• If you connect your TV to the unit with a cable other than HDMI, video input to the unit via HDMI cannot be
output to the TV.
AV 1
VIDEO
VIDEO
O
(TV)
AV4
Y
MONITOR OUT
COMPONENT VIDEO
OPTICAL
O
• Operations with TV screen are available only when your TV is connected to the unit via HDMI.
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
AV 4 (OPTICAL) jack
• If you have connected any external device to the AV 4 jacks or if you want to use another input jack (other
than OPTICAL) for connecting the TV, connect the TV to one of the AV 1–6 and AUDIO 1–2 jacks. To use
the SCENE function (p.41), you also need to change the input assignment for SCENE(TV).
Audio output
(digital optical)
TV
❑ COMPONENT VIDEO connection (with a component video cable)
MONITOR OUT
(COMPONENT VIDEO)
jacks
Video input
(component video)
COMPONENT
VIDEO
COMPONENT
VIDEO
PR
PR
The unit (rear)
PB
TRIGGER OUT
12V 0.1A
PR
PB
Y
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
PR
H
(BD/DVD)
PB
IN
Y
ARC
OUT
PB
TOR OUT
REMOTE
OPTICAL
AM
VIDEO
Y
FM
(TV)
AV4
Y
COMPONENT
VIDEO
COAXIAL
(RADIO)
PR
ANTENNA
AV3
Y
PR
PB
PB
OPTICAL
AV2
OPTICAL
AV 1
VIDEO
VIDEO
O
(TV)
AV4
Y
MONITOR OUT
COMPONENT VIDEO
OPTICAL
O
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
AV 4 (OPTICAL) jack
Audio output
(digital optical)
TV
PREPARATIONS ➤ Connecting a TV
En
25
1 2 3 4 Playback device connections 5 6 7 8 9 10
4 Connecting playback devices
The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod or a USB storage device, see the following pages.
– Connecting an iPod (p.53)
■ Component video connection
Connect a video device to the unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on
the audio output jacks available on your video device.
– Connecting a USB storage device (p.57)
Output jacks on video device
Connecting video devices (such as BD/DVD players)
Input jacks on the unit
Video
Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
• If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device (p.27).
The unit
(rear)
Y
HDMI 3
PB
PR
Y
PB
ARC
OPTICAL
AM
VIDEO
PB
FM
Y
COMPONENT VIDEO
COAXIAL
Y
(RADIO)
ANTENNA
AV3
Y
HDMI 2
PR
(BD
REMOTE
(TV)
AV4
HDMI 1
COMPONENT
VIDEO
PR
H
HDMI OUT
(NET)
IN
(BD/DVD)
Video output
(component video)
PR
PB
NETWORK
OUT
HDMI 1–5 jacks
AV 1 (COMPONENT VIDEO + OPTICAL)
AV 2 (COMPONENT VIDEO + COAXIAL)
AV 1–2
(COMPONENT VIDEO)
jacks
DC OUT
5V 0.5A
Connect a video device to the unit with an HDMI cable.
Digital optical
Digital coaxial
Component video
TRIGGER OUT
12V 0.1A
■ HDMI connection
Audio
HDMI 4
HDMI 5
PR
PB
AV2
VIDEO
VIDE
OPTICAL
AV 1
MO
COMPONENT VIDEO
The unit (rear)
C
C
AV2
K
HDMI 1
HDMI OUT
HDMI 2
HDMI 3
HDMI 4
HDMI 5
AUDIO 1
AUDIO 2
HDMI output
HDMI
ARC
AV 6
AV OUT
O
AV 1
AM
HDMI
COMPONENT
VIDEO
PR
ANTENNA
HDMI
PR
SPEAKERS
PB
FRONT
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
OPTICAL
Audio output
(digital optical or digital coaxial)
If you select the input source by pressing AV 1–2, the video/audio played back on the
video device will be output from the unit.
MONITOR OUT
AUDIO 2
O
CENTER
Y
O1
Video device
CLASS 2 WIRING CABLAGE
VIDEO
T VIDEO
ZONE
FM
(RADIO)
VIDEO
COAXIAL
ZONE
AV 5
OPTICAL
(BD/DVD)
SUBWOOFER
PRE OUT
Video device
If you select the input source by pressing HDMI 1–5, the video/audio played back on
the video device will be output from the unit.
• The component video signals (other than 480i/576i signals) input to AV 1–2 jacks of the unit can be output
from the MONITOR OUT (COMPONENT VIDEO) jacks only. To watch those videos, you need to connect
your TV to the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.25).
• To watch videos input to the HDMI 1–5 jacks, you need to connect your TV to the HDMI OUT jack of the
unit (p.21 to 24).
PREPARATIONS ➤ Connecting playback devices
En
26
1 2 3 4 Playback device connections 5 6 7 8 9 10
■ Composite video connection
■ Changing the combination of video/audio input jacks
Connect a video device to the unit with a video pin cable and an audio cable (digital
coaxial, digital optical, or stereo pin cable). Choose a set of input jacks (on the unit)
depending on the audio output jacks available on your video device.
If the combination of video/audio input jacks available on the unit does not match your
video device, change its combination according to the output jacks of your device. You
can connect a video device that has the following video/audio output jacks.
Output jacks on video device
Output jacks on video device
Input jacks on the unit
Input jacks on the unit
Video
Audio
Composite video
Video
Digital coaxial
AV 3 (VIDEO + COAXIAL)
Digital optical
AV 4 (VIDEO + OPTICAL)
Analog stereo
AV 5–6 (VIDEO + AUDIO)
HDMI
Audio
Video
Audio
Digital optical
HDMI 1–5
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial
HDMI 1–5
AV 2–3 (COAXIAL)
Analog stereo
HDMI 1–5
AV 5–6 (AUDIO)
AUDIO 1–2
Analog stereo
AV 1–2
(COMPONENT
VIDEO)
AV 5–6 (AUDIO)
AUDIO 1–2
Video output
(composite video)
Component video
VIDEO
AV 3–6 (VIDEO)
jack
V
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
❑ Necessary setting
VIDEO
NETWORK
HDMI OUT
(NET)
IN
V
ARC
OUT
REMOTE
OPTICAL
AM
VIDEO
(TV)
AV4
COAXIAL
Video device
(R
AN
For example, if you have connected a video device to AV 2 (COMPONENT VIDEO) and
AV 5 (AUDIO) jacks of the unit, change the combination setting as follows.
AV3
Y
OPTICAL
PR
PB
AV2
O
VIDEO
Video output
(component video)
O
OPTICAL
OPTICAL
AV 1
COMPONENT VIDEO
COAXIAL
C
COAXIAL
AUDIO 1
AUDIO 2
AV 5
AV 6
COMPONENT
VIDEO
C
The unit (rear)
AV 2 (COMPONENT VIDEO)
jacks
L
A
TRIGGER OUT
12V 0.1A
L
L
DC OUT
5V 0.5A
NETWORK
HDMI OUT
(NET)
PR
IN
R
The unit (rear)
R
R
ARC
OUT
Y
PR
PB
REMOTE
OPTICAL
AM
VIDEO
(TV)
AV4
AV2
Any of AV 3 (COAXIAL) jack,
AV 4 (OPTICAL) jack,
AV 5–6 (AUDIO) jacks
Audio output
(either digital optical,
digital coaxial, or analog stereo)
COAXIAL
PR
PR
PB
PB
Y
Y
(RADIO
PB
Y
ANTEN
AV3
Y
PR
PB
AV2
VIDEO
OPTICAL
AV 1
AUDIO
COMPONENT VIDEO
If you select the input source by pressing AV 3–6, the video/audio played back on the
video device will be output from the unit.
L
L
L
AUDIO 1
AUDIO 2
AV 5
AV 6
AV OU
R
R
Video device
R
AV 5
• To watch videos input to the AV 3–6 (VIDEO) jacks, you need to connect your TV to the HDMI OUT jack
(p.21 to 24) or to the MONITOR OUT (VIDEO) jack (p.25) of the unit.
AV 5 (AUDIO) jacks
Audio output
(analog stereo)
PREPARATIONS ➤ Connecting playback devices
En
27
1 2 3 4 Playback device connections 5 6 7 8 9 10
• The following operation is available only when your TV is connected to the unit via HDMI.
1
After connecting external devices (such as a TV and playback
devices) and power cable of the unit, turn on the unit.
2
Press AV 2 to select “AV 2” (video input jack to be used) as the input
source.
5
6
7
Use the cursor keys to select “Audio In” and press ENTER.
8
Press ON SCREEN.
Use the cursor keys to select “AV5” (audio input jack to be used).
V-AUX
AV
1
2
3
5
6
1
USB
NET
N
4
AV 2
AUDIO
TUNER
TOP MENU
2
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
3
4
5
DISPLAY
ON SCREEN
Cursor keys
ENTER
This completes the necessary settings.
If you select “AV 2” as the input source by pressing AV 2, the video/audio played back
on the video device will be output from the unit.
Press ON SCREEN.
Use the cursor keys to select “Input” and press ENTER.
Use the cursor keys (e/r) to select “AV2” (video input jack to be
used) and press the cursor key (q).
PREPARATIONS ➤ Connecting playback devices
En
28
1 2 3 4 Playback device connections 5 6 7 8 9 10
Connecting audio devices (such as CD players)
Connecting to the jacks on the front panel
Connect audio devices such as CD players and MD players to the unit. Depending on
the audio output jacks available on your audio device, choose one of the following
connections.
Use the VIDEO AUX jack to temporarily connect a playback device to the unit.
Audio output jacks on audio device
Audio output jacks on the unit
Digital optical
AV 1 (OPTICAL)
AV 4 (OPTICAL)
Digital coaxial
AV 2–3 (COAXIAL)
Analog stereo
AV 5–6 (AUDIO)
AUDIO 1–2
Use the USB jack to connect an iPod or a USB storage device. For details, see
“Connecting an iPod” (p.53) or “Connecting a USB storage device” (p.57).
Before making a connection, stop playback on the device and turn down the volume on
the unit.
❑ HDMI connection
Connect an HDMI-compatible device (such as game consoles and camcorders) to the
unit with an HDMI cable.
BD
DVD
The unit
(rear)
Audio output
(either digital optical,
digital coaxial, or analog stereo)
AV 1–6 jacks
AUDIO 1–2 jacks
TRIGGER OUT
12V 0.1A
INPUT
TONE CONTROL
TV
NET
PROGRAM
RADIO
STRAIGHT
VIDEO AUX
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
O
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
HDMI 2
HDMI
(BD/DVD)
OPTICAL
IN
The unit (front)
ARC
OUT
C
REMOTE
OPTICAL
VIDEO
AM
OPTICAL
(TV)
AV4
FM
COAXIAL
COMPONENT
VIDEO
O
COAXIAL
(RADIO)
L
PR
ANTENNA
AV3
Y
PR
PB
COAXIAL
AV2
C
OPTICAL
VIDEO
R
Y
AV 1
MONITOR OUT
COMPONENT VIDEO
L
AUDIO 1
Audio device
L
PB
VIDEO
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
R
R
Game console
If you select the input source by pressing AV 1–6, AUDIO 1–2 or PHONO*, the audio
played back on the audio device will be output from the unit.
Camcorder
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the device will be output from the unit.
• To watch videos input to the VIDEO AUX (HDMI/MHL IN) jack, you need to connect your TV to the HDMI
OUT jack of the unit (p.21 to 24).
• You need to prepare an HDMI cable that match the output jacks on your device.
• When “USB” is selected as the input source, video signals input to the VIDEO jack are output from the
HDMI OUT and MONITOR OUT (VIDEO) jacks.
PREPARATIONS ➤ Connecting playback devices
En
29
1 2 3 4 Playback device connections 5 FM/AM antenna connections 6 7 8 9 10
❑ MHL connection
Connect an MHL-compatible mobile device (such as smartphones) to the unit with an
MHL cable. You can enjoy full HD videos and multichannel audio sources stored on the
mobile device. The VIDEO AUX jack of the unit enables you to input videos and audio
directly from the mobile device to the unit.
BD
DVD
INPUT
TONE CONTROL
5 Connecting the FM/AM antennas
Connect the supplied FM/AM antennas to the unit.
Fix the end of the FM antenna to a wall, and place the AM antenna on a flat surface.
FM antenna
TV
RADIO
NET
AM antenna
STRAIGHT
PROGRAM
VIDEO AUX
HDMI/
MHL 5V 1A
VIDEO
5V
2.1A
MHL
The unit (front)
The unit (rear)
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
HDMI 2
HDMI 3
HDMI 4
HDMI 5
(BD/DVD)
IN
ARC
OUT
REMOTE
OPTICAL
AM
VIDEO
FM
(TV)
AV4
MHL output
COMPONENT
VIDEO
COAXIAL
(RADIO)
PR
ANTENNA
AV3
Y
PB
PR
SPEAKERS
PB
AV2
VIDEO
VIDEO
CLASS 2 WIRING CABLAGE CLASSE 2
FRONT
CENTER
SURROUND
OPTICAL
Y
MHL
AV 1
Mobile device
COMPONENT VIDEO
MONITOR OUT
Assembling and connecting the AM antenna
If you select “V-AUX” as the input source by pressing V-AUX, the video/audio played
back on the mobile device will be output from the unit.
• To watch videos input to the VIDEO AUX jack, you need to connect your TV to the HDMI OUT jack of the
unit (p.21 to 24).
• You need to prepare an MHL cable that match the jack on your mobile device.
• You can operate the mobile device using the menu operation keys, external device operation keys and
numeric keys on the remote control. However, some features may not be compatible, depending on the
mobile device or its application. In this case, operate the mobile device itself.
• If “Standby Through” (p.91) in the “Setup” menu is set to “On”, you can output mobile device videos/audio
to the TV or operate the mobile device using the remote control of the unit even when the unit is in standby
mode.
Hold down
Insert
Release
• The unit supplies power to the mobile device in the following conditions.
– The unit is turned on.
– The unit is in standby mode while “Standby Through” (p.91) in the “Setup” menu is set to “On”.
• Unwind only the length of cable needed from the AM antenna unit.
• The wires of the AM antenna have no polarity.
PREPARATIONS ➤ Connecting the FM/AM antennas
En
30
1 2 3 4 5 6 Network connections 7 8 9 10
6 Connecting to a network
Connect the unit to your router with a commercially-available STP network cable (CAT-5
or higher straight cable).
You can enjoy Internet radio or music files stored on media servers, such as PCs and
Network Attached Storage (NAS), on the unit.
Internet
Network Attached Storage
(NAS)
• If you are using a router that supports DHCP, you do not need to configure any network settings for the unit,
as the network parameters (such as the IP address) will be assigned automatically to it. You only need to
configure the network settings if your router does not support DHCP or if you want to configure the network
parameters manually (p.92).
• You can check whether the network parameters (such as IP address) are properly assigned to the unit in
“Network” (p.98) in the “Information” menu.
WAN
• Some security software installed on your PC or the firewall settings of network devices (such as a router)
may block the access of the unit to the network devices or the Internet. In these cases, configure the
security software or firewall settings appropriately.
PC
LAN
Modem
• Each server must be connected to the same subnet as the unit.
• To use the service via the Internet, broadband connection is strongly recommended.
Router
Network cable
Mobile device
(such as iPod touch
and iPhone)
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
HDMI 2
(BD/DVD)
IN
ARC
OUT
REMOTE
OPTICAL
AM
VIDEO
FM
(TV)
AV4
COMPONENT
VIDEO
COAXIAL
(RADIO)
PR
ANTENNA
AV3
Y
PR
PB
PB
AV2
VIDEO
VIDEO
OPTICAL
Y
AV 1
MONITOR OUT
COMPONENT VIDEO
The unit (rear)
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
PREPARATIONS ➤ Connecting to a network
En
31
1 2 3 4 5 6 7 Other connections 8 9 10
7 Connecting other devices
Connecting recording devices
Connecting a device compatible with the trigger function
You can connect video/audio recording devices to the AV OUT jacks. These jacks
output analog video/audio signals selected as the input.
The trigger function can control an external device in conjunction with operating the
unit (such as powering on/off and input selection). If you have a Yamaha subwoofer that
supports a system connection or a device with a trigger input jack, you can use the
trigger function by connecting the external device to the TRIGGER OUT jack.
• To copy video/audio from a video device, connect the video device to the AV 5–6 jacks of the unit.
• To copy audio from an audio device, connect the audio device to the AV 5–6 jacks or AUDIO 1–2 jacks of
the unit.
• Be sure to use the AV OUT jacks only for connecting recording devices.
TRIGGER OUT jack
TRIGGER OUT
12V 0.1A
TRIGGER OUT
12V 0.1A
DC OUT
5V 0.5A
NETWORK
HDMI OUT
(NET)
IN
Video/audio input
AV OUT jacks
The unit (rear)
ARC
OUT
REMOTE
OPTICAL
AM
VIDEO
System
connection
input
(TV)
AV4
VIDEO
COAXIAL
(RADIO)
ANTENNA
AV3
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
HDMI 2
HDMI
V
Y
V
(BD/DVD)
PR
PB
AV2
VIDEO
OPTICAL
ARC
L
AM
VIDEO
CAL
FM
(TV)
AV4
L
L
R
R
AV 1
XIAL
R
(RADIO)
PR
ANTENNA
Video recording
device
AV3
Y
PR
PB
PB
AV2
VIDEO
VIDEO
CAL
AUDIO 1
AUDIO 2
AV 5
AV 6
AV OUT
Yamaha subwoofer that
supports a system connection
AUDIO
AV OUT
Y
AV 1
COMPONENT VIDEO
COMPONENT
VIDEO
MONITOR OUT
COMPONENT VIDEO
The unit (rear)
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
SUBWO
PRE
L
• You can configure the trigger function settings in “Trigger Output” (p.95) in the “Setup” menu.
L
R
R
Audio recording
device
AUDIO
Audio input
PREPARATIONS ➤ Connecting other devices
En
32
1 2 3 4 5 6 7 8 Power cable connection 9 10
8 Connecting the power cable
After all the connections are complete, plug in the power cable.
The unit (rear)
To an AC wall outlet
5
EXTRA SP
ZONE2/F.PRESENCE
SPEAKERS
WIRING CABLAGE CLASSE 2
CENTER
SURROUND
SURROUND BACK/BI-AMP
SINGLE
PREPARATIONS ➤ Connecting the power cable
En
33
1 2 3 4 5 6 7 8 9 Language setting 10
RECEIVER
SOURCE
RECEIVER z
9 Selecting an on-screen menu language
HDMI
1
2
3
4
5
Select the desired on-screen menu language from English
(default), Japanese, French, German, Spanish, Russian, Italian and
Chinese.
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
ZONE 2
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
1
2
Press RECEIVER z to turn on the unit.
3
4
Press ON SCREEN.
5
Use the cursor keys (e/r) to select “Language” and
the cursor keys (q/w) to select the desired
language.
OPTION
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
6
7
To confirm the setting, press ENTER.
To exit from the menu, press ON SCREEN.
• The information on the front display is provided in English only.
Use the cursor keys to select “Setup” and press
ENTER.
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
9
0
ENHANCER PURE DIRECT
4
8
MEMORY
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
PREPARATIONS ➤ Selecting an on-screen menu language
En
34
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
RECEIVER
SOURCE
RECEIVER z
10 Optimizing the speaker settings automatically (YPAO)
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
The Yamaha Parametric room Acoustic Optimizer (YPAO) function
detects speaker connections, measures the distances from them to
your listening position(s), and then automatically optimizes the
speaker settings, such as volume balance and acoustic
parameters, to suit your room.
4
Place the YPAO microphone at your listening
position (same height as your ears) and connect it
to the YPAO MIC jack on the front panel.
YPAO MIC
jack
ZONE 2
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
The unit (front)
YPAO MIC
• The YPAO function of the unit adopts the YPAO-R.S.C. (Reflected Sound Control)
technology that enables to create natural sound fields like a room specifically
designed for acoustic perfection.
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
• Please note the following when using YPAO.
1
– Use YPAO after connecting a TV and speakers to the unit.
– During the measuring process, test tones are output at high volume. Ensure that
the test tones do not frighten small children. Also, refrain from using this function
at night when it may be a nuisance to others.
ENTER
RETURN
DISPLAY
– During the measuring process, you cannot adjust the volume.
BAND
– During the measuring process, keep the room as quiet as possible.
9
2
3
MODE
TUNING
– Do not connect headphones.
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
ENHANCER PURE DIRECT
3
4
7
8
MEMORY
9
10
0
4
1
2
Press RECEIVER z to turn on the unit.
3
Turn on the subwoofer and set the volume to half. If
the crossover frequency is adjustable, set it to
maximum.
ENT
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack).
YPAO
5
microphone
Ear height
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
VOLUME
MIN
MAX
CROSSOVER/
HIGH CUT
MIN
Place the YPAO microphone at
your listening position (same height
as your ears). We recommend the
use of a tripod as a microphone
stand. You can use the tripod
screws to stabilize the microphone.
9
MAX
• If you are using bi-amp connection or Zone2 speakers, set “Power Amp
Assign” (p.85) in the “Setup” menu to the appropriate setting before starting
YPAO.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
35
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
The following screen appears on the TV.
RECEIVER
SOURCE
• If any error message (such as E-1) or warning message (such as W-1)
appears, see “Error messages” (p.38) or “Warning messages” (p.39).
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
4
USB
NET
• To check the measurement results, select “Result”. For details, see
“Checking the measurement results” (p.37).
AUDIO
TUNER
MAIN
2
ZONE 2
6
Use the cursor keys to select “Save/Cancel” and
press ENTER.
7
To save the measurement results, use the cursor
keys (e/r) to select “SAVE” and press ENTER.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
• To cancel the operation, disconnect the YPAO microphone before starting
the measurement.
• To configure the power amplifier assignment setting, press RETURN and
select “Manual Setup” (p.85).
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
Cursor keys
ENTER
RETURN
• Do not stand between the speakers and the YPAO microphone during the
measurement process (about 3 minutes).
• Move to the corner of the room or leave the room.
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
5
6
9
0
3
7
4
8
5
To start the measurement, use the cursor keys to
select “Measure” and press ENTER.
The adjusted speaker settings are applied.
The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.
MEMORY
10
• To finish the measurement without saving the result, select “CANCEL”.
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
• To cancel the measurement temporarily, press RETURN.
The following screen appears on the TV when the
measurement finishes.
8
Disconnect the YPAO microphone from the unit.
This completes optimization of the speaker settings.
Caution
• The YPAO microphone is sensitive to heat, so should not be placed anywhere
where it could be exposed to direct sunlight or high temperatures (such as on
top of AV equipment).
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
36
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
RECEIVER
SOURCE
Checking the measurement results
Reloading the previous YPAO adjustments
You can check the YPAO measurement results.
When the speaker settings you have configured manually are not
suitable, follow the procedure below to discard the manual settings
and reload the previous YPAO adjustments.
HDMI
1
2
3
4
5
V-AUX
1
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
After the measurement, use the cursor keys to
select “Result” and press ENTER.
1
In the “Setup” menu, select “Speaker”, “Auto
Setup”, and then “Result” (p.82).
2
Use the cursor keys to select “Setup Reload” and
press ENTER.
3
To exit from the menu, press ON SCREEN.
ZONE 2
• You can also select “Result” from “Auto Setup” (p.83) in the “Setup” menu,
which displays the previous measurement results.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
The following screen appears.
VOLUME
POP-UP/MENU
ON
SCREEN
ON SCREEN
1
OPTION
ENTER
RETURN
DISPLAY
2
Cursor keys
ENTER
RETURN
BAND
MODE
TUNING
1 Measurement result items
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
9
0
ENHANCER PURE DIRECT
3
7
4
2 Measurement result details
2
Use the cursor keys to select an item.
8
Wiring
Polarity of each speaker
Normal: The speaker cable is connected with the
correct polarity (+/-).
Reverse: The speaker cable may be connected with the
reverse polarity (+/-).
Size
Size of each speaker (cross-over frequency of the
subwoofer)
Large: The speaker can reproduce low-frequency
signals effectively.
Small: The speaker cannot reproduce low-frequency
signals effectively.
Distance
Distance from the listening position to each speaker
Level
Output level adjustment for each speaker
MEMORY
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
• A speaker with a problem is indicated with a message enclosed in a red box.
3
To finish checking the results and return to the
previous screen, press RETURN.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
37
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
Error messages
If any error message is displayed during the measurement, resolve the problem and perform YPAO again.
Error message
Cause
E-1: No Front SP
Front speakers are not detected.
E-2: No Sur. SP
One of the surround speakers cannot be detected.
E-3: No F.PRNS SP
One of the presence speakers cannot be detected.
E-4: SBR → SBL
A surround back speaker is connected to the R side only.
When using only one surround back speaker, you need to connect it to the SINGLE jack (L side). Follow the
on-screen instructions to exit YPAO, turn off the unit, and then reconnect the speaker.
E-5: Noisy
The noise is too loud.
Keep the room quiet and follow the on-screen instructions to start the measurement again. If you select
“PROCEED”, YPAO takes the measurement again and ignores any noise detected.
E-6: Check Sur.
Surround back speakers are connected, but no surround
speakers are connected.
Surround speakers need to be connected in order to use surround back speakers. Follow the on-screen
instructions to exit YPAO, turn off the unit, and then reconnect the speakers.
E-7: No MIC
The YPAO microphone has been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again.
E-8: No Signal
The YPAO microphone cannot detect test tones.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow the on-screen instructions to start the
measurement again. If this error occurs repeatedly, contact the nearest authorized Yamaha dealer or service
center.
E-9: User Cancel
The measurement has been canceled.
Follow the on-screen instructions to start the measurement again. To cancel the measurement, select “EXIT”.
An internal error has occurred.
Follow the on-screen instructions to exit YPAO, turn off and on the unit. If this error occurs repeatedly, contact
the nearest authorized Yamaha dealer or service center.
E-10: Internal Error
Remedy
Follow the on-screen instructions to exit YPAO, turn off the unit, and then check the speaker connections.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
38
1 2 3 4 5 6 7 8 9 10 Automatic speaker setup
Warning messages
If a warning message is displayed after the measurement, you can still save the measurement results by following on-screen instructions.
However, we recommend you perform YPAO again in order to use the unit with the optimal speaker settings.
Warning message
Cause
Remedy
W-1: Out of Phase
A speaker cable may be connected with the reverse polarity
(+/-).
Select “Wiring” in “Result” (p.37) and check the cable connections (+/-) of the speaker identified by
“Reverse”. If the speaker is connected incorrectly, turn off the unit and then reconnect the speaker cable.
Depending on the type of speakers or room environment, this message may appear even if the speakers are
connected correctly. In this case, you can ignore the message.
W-2: Over Distance
A speaker is placed more than 24 m (80 ft) from the listening
position.
Select “Distance” in “Result” (p.37) and move the speaker identified by “>24.00m (>80.0ft)” within 24 m (80
ft) of the listening position.
W-3: Level Error
There are significant volume differences between the
speakers.
Check the usage environment and cable connections (+/-) of each speaker, and the volume of the
subwoofer. We recommend using the same speakers or speakers with specifications that are as similar as
possible.
PREPARATIONS ➤
Optimizing the speaker settings automatically (YPAO)
En
39
PLAYBACK
RECEIVER
SOURCE
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
Input selection keys
Basic playback procedure
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
1
ZONE 2
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
MUTE
VOLUME
2
Use the input selection keys to select an input
source.
3
Start playback on the external device or select a
radio station.
ON SCREEN
a Press ON SCREEN.
b Use the cursor keys to select “Input” and press ENTER.
c Use the cursor keys to select the desired input source and
press ENTER.
For details on the following operations, see the
corresponding pages.
Cursor keys
ENTER
RETURN
On-screen input selection
Refer to the instruction manual for the external device.
OPTION
ENTER
Turn on the external devices (such as a TV or
BD/DVD player) connected to the unit.
DISPLAY
• Listening to FM/AM radio (p.48)
BAND
MODE
TUNING
• Playing back iPod music (p.53)
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
• Playing back music stored on a USB storage device
(p.57)
ENHANCER PURE DIRECT
1
2
3
4
5
6
7
8
• Playing back music stored on media servers (PCs/NAS)
(p.60)
MEMORY
9
10
0
ENT
• Listening to Internet radio (p.63)
TV
INPUT
TV VOL
MUTE
TV CH
• Playing back iTunes/iPod music via a network (AirPlay)
(p.65)
CODE SET
4
Press VOLUME to adjust the volume.
• To mute the audio output, press MUTE. Press MUTE again to unmute.
• To adjust the treble/bass settings, use the “Option” menu or TONE
CONTROL on the front panel (p.73).
PLAYBACK ➤ Basic playback procedure
En
40
SOURCE
RECEIVER
SOURCE
Selecting the input source and favorite settings with one touch (SCENE)
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
Input selection keys
AUDIO
MAIN
The SCENE function allows you to select the assigned input source,
sound program, Compressed Music Enhancer on/off with just one
touch.
2
1
ZONE 2
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
1
The input source and settings registered to the
corresponding scene are selected. The unit turns on
automatically when it is in standby mode.
SCENE
BD
DVD
Press SCENE.
Configuring scene assignments
SCENE
By default, the following settings are registered for each scene.
SCENE
Input
Sound program
Compressed Music
Enhancer
BD/DVD
HDMI 1
MOVIE (Sci-Fi)
Off
TV
AV 4
STRAIGHT
On
NET
NET RADIO
MUSIC
(7ch Stereo)
On
RADIO
TUNER
MUSIC
(7ch Stereo)
On
Perform the following operations to prepare the
settings you want to assign to a scene.
• Select an input source (p.40)
• Select a sound program (p.42)
• Enable/disable Compressed Music Enhancer (p.47)
2
Hold down the desired SCENE key until “SET
Complete” appears on the front display.
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
9
0
ENHANCER PURE DIRECT
SETComplete
3
SW
C
R
L
SL
SR
SBL
SBR
If you want to control the corresponding playback
device after selecting the scene, hold down the
corresponding SCENE key and input selection key
together for more than 3 seconds.
4
8
MEMORY
10
VOL.
Once the setting is completed successfully, SOURCE blinks twice.
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
• If you have not registered the remote control code of the playback device yet, see
“Registering the remote control codes for playback devices” (p.103) to register it.
• You can also configure scene assignments in the “Scene” menu (p.77).
• The SCENE link playback function allows you to start playback of an external
device connected to the unit via HDMI. To enable SCENE link playback, specify
the device type in “Device Control” (p.78) in the “Scene” menu.
PLAYBACK ➤ Selecting the input source and favorite settings with one touch (SCENE)
En
41
Selecting the sound mode
RECEIVER
SOURCE
HDMI
1
2
3
4
5
The unit is equipped with a variety of sound programs and
surround decoders that allow you to enjoy playback sources with
your favorite sound mode (such as sound field effect or stereo
playback).
V-AUX
AV
1
2
3
4
5
6
1
TUNER
USB
NET
AUDIO
MAIN
2
❑ Selecting a sound program suitable for movies
ZONE 2
• Press MOVIE repeatedly.
SCENE
BD
DVD
TV
NET
RADIO
MUTE
TOP MENU
VOLUME
POP-UP/MENU
ON
SCREEN
PROGRAM
ON SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
❑ Selecting a sound program suitable for music or
stereo playback
b Use the cursor keys to select “Sound Program” and press
ENTER.
c Use the cursor keys to select a sound program/surround
decoder and press ENTER.
TUNING
PRESET
SUR. DECODE STRAIGHT
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
5
6
9
0
3
7
4
8
MEMORY
10
ENT
TV
• The sound mode can be applied separately to each input source.
• When you play back audio signals with a sampling rate of higher than 96 kHz, the
straight decode mode (p.46) is automatically selected.
• You can check which speakers are currently outputting sound by looking at the
speaker indicators on the unit’s front panel (p.9) or at the “Audio Signal” screen in
the “Information” menu (p.97).
• Press SUR.DECODE repeatedly.
This mode lets you enjoy unprocessed multichannel playback from
2-channel sources (p.46).
❑ Switching to the straight decode mode
• Press STRAIGHT.
INPUT
TV VOL
MOVIE
MUSIC
SUR.DECODE
STRAIGHT
ENHANCER
PURE DIRECT
• You can change the settings of the surround programs and surround decoders in
the “Sound Program” menu (p.79).
This mode lets you enjoy sound field effects optimized for listening
music sources or stereo playback (p.45).
❑ Selecting a surround decoder
BAND
• You can also switch the sound programs and surround decoder by pressing
PROGRAM.
• Press MUSIC repeatedly.
DISPLAY
MODE
MUTE
a Press ON SCREEN.
This mode lets you enjoy sound field effects optimized for viewing
video sources, such as movies, TV programs, and games (p.44).
PROGRAM
MOVIE
On-screen sound program/surround decoder selection
TV CH
CODE SET
This mode lets you enjoy unprocessed sounds in original channels
(p.46).
❑ Switching to the Pure Direct mode
• Press PURE DIRECT.
This mode lets you enjoy pure high fidelity sound by reducing the
electrical noise from other circuitry (p.47).
❑ Enabling Compressed Music Enhancer
• Press ENHANCER.
This mode lets you enjoy compressed music with additional depth
and breadth (p.47).
PLAYBACK ➤ Selecting the sound mode
En
42
Enjoying stereoscopic sound fields
(CINEMA DSP 3D)
Enjoying surround sound with headphones
(SILENT CINEMA)
The unit is equipped with a variety of sound programs that utilize
Yamaha’s original DSP technology (CINEMA DSP 3D). It allows you
to easily create sound fields like actual movie theaters or concert
halls in your room and enjoy natural stereoscopic sound fields.
You can enjoy surround or sound field effects, like a multichannel
speaker system, with stereo headphones by connecting the
headphones to the PHONES jack and selecting a sound program
or a surround decoder.
Sound program category
“CINEMA DSP n” lights up
VOL.
3
Hall in Vienna
PL
L
SL
SW
C
PR
R
SR
Sound program
• To use the conventional CINEMA DSP, set “CINEMA DSP 3D Mode” (p.73) in the
“Option” menu to “Off”.
• We recommend using presence speakers in order to experience the full effect of
the stereoscopic sound fields. However, even when no presence speakers are
connected, the unit creates Virtual Presence Speaker (VPS) using the front,
center, and surround speakers to produce stereoscopic sound fields.
■ Enjoying sound field effects without
surround speakers (Virtual CINEMA DSP)
If you select one of the sound programs (except 2ch Stereo and
7ch Stereo) when no surround speakers are connected, the unit
utilizes Yamaha’s original virtual surround technology to reproduce
up to 7-channel surround sound and enable you to enjoy the
well-oriented sound field only with the front-side speakers. We
recommend using presence speakers in order to enjoy more
effective stereoscopic sound field.
PLAYBACK ➤ Selecting the sound mode
En
43
■ Sound programs suitable for movies (MOVIE)
❑ ENTERTAINMENT
The following sound programs are optimized for viewing video sources, such as
movies, TV programs, and games.
Sports
This program allows listeners to enjoy the rich vividness of sport broadcasts
and light entertainment programs. In sports broadcasts, the commentators’
voices are positioned clearly at the center, while the atmosphere inside the
stadium is realistically conveyed by the peripheral delivery of the sounds of
the fans in a suitable space.
Action Game
This program is suitable for action games, such as car racing and fighting
games. The reality of, and emphasis on, various effects makes the player
feel like they are right in the middle of the action, allowing for greater
concentration. Use this program in combination with Compressed Music
Enhancer for a more dynamic and strong sound field.
Roleplaying Game
This program is suitable for role-playing and adventure games. This
program adds depth to the sound field for natural and realistic reproduction
of background music, special effects, and dialogue from a wide variety of
scenes. Use this program in combination with Compressed Music
Enhancer for a clearer and more spatial sound field.
Music Video
This program allows you to enjoy videos of pop, rock, and jazz concerts, as
if you were there yourself. Immerse yourself in the hot concert atmosphere
thanks to the vividness of the singers and solos on stage, a presence
sound field that emphasizes the beat of rhythm instruments, and a surround
sound field that reproduces the space of a big live hall.
❑ MOVIE THEATER
Standard
This program creates a sound field that emphasizes the surround feeling
without disturbing the original acoustic positioning of multichannel audio,
such as Dolby Digital and DTS. Its design is based on the concept of the
ideal movie theater, in which the audience is surrounded by beautiful
reverberations from the left, right, and rear.
Spectacle
This program delivers the scale and grandeur of spectacular movie
productions. It delivers an expansive sound space to match the
cinemascope wide-screen, and boasts a broad dynamic range, providing
everything from small delicate sounds to powerful loud booms.
Sci-Fi
This program clearly reproduces the finely elaborated sound design of the
latest Sci-Fi and SFX movies. You can enjoy a variety of
cinematographically created virtual spaces reproduced with clear
separation between dialogue, sound effects, and background music.
Adventure
This program is ideal for reproducing the sound design of action and
adventure movies precisely. The sound field restrains reverberations, but
puts emphasis on reproducing a sensation of expansiveness on both sides,
powerful space expanded widely to the left and right. The restrained depth
creates a clear and powerful space, while also maintaining the articulation
of the sounds and the separation of the channels.
Drama
This program features stable reverberations that match a wide range of
movie genres, from serious dramas to musicals and comedies. The
reverberations are modest, but suitably stereophonic. The sound effects
and background music are reproduced with a gentle echo that does not
impinge on the articulation of the dialogue. You’ll never get tired listening for
long periods.
Mono Movie
This program reproduces monaural video sources, such as classic movies,
in an atmosphere of a good old movie theater. The program creates a
pleasant space with depth, by adding breadth and the appropriate
reverberation to the original audio.
PLAYBACK ➤ Selecting the sound mode
En
44
■ Sound programs suitable for music/stereo playback
(MUSIC)
The following sound programs are optimized for listening to music sources.
You can also select stereo playback.
❑ CLASSICAL
Hall in Munich
This program simulates a Munich concert hall with approximately 2,500
seats that uses stylish wood for the interior finishing. Fine, beautiful
reverberations spread richly, creating a calming atmosphere. The listener’s
virtual seat is at the center left of the arena.
Hall in Vienna
This program simulates a 1,700-seat, middle-sized concert hall with a
shoebox shape that is traditional in Vienna. Pillars and ornate carvings
create extremely complex reverberations from all around the audience,
producing a very full, rich sound.
Chamber
This program creates a relatively wide space with a high ceiling, like an
audience hall in a palace. It offers pleasant reverberations that are suitable
for courtly music and chamber music.
❑ LIVE/CLUB
Cellar Club
This program simulates an intimate concert venue with a low ceiling and
homey atmosphere. A realistic, live sound field delivers powerful sounds
that make you feel as if you are sitting in the front row in front of a small
stage.
The Roxy Theatre
This program creates the sound field of a 460-seat rock music concert
venue in Los Angeles. The listener’s virtual seat is at the center left of the
hall.
The Bottom Line
This program creates the sound field at stage front in The Bottom Line, a
famous New York jazz club once. The floor can seat 300 people to the left
and right in a sound field offering real and vibrant sound.
❑ STEREO
2ch Stereo
Use this program to mix down multichannel sources to 2 channels. When
multichannel signals are input, they are down mixed to 2 channels and
output from the front speakers (this program does not utilize CINEMA DSP).
7ch Stereo
Use this program to output sound from all speakers. When you play back
multichannel sources, the unit mixes down the source to 2 channels, and
then outputs the sound from all speakers. This program creates a larger
sound field and is ideal for background music at parties.
• CINEMA DSP 3D (p.43) and Virtual CINEMA DSP (p.43) do not work when “2ch Stereo” or “7ch Stereo” is
selected.
PLAYBACK ➤ Selecting the sound mode
En
45
Enjoying unprocessed playback
RECEIVER
SOURCE
HDMI
1
2
3
You can play back input sources without any sound field effect
processing.
4
5
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
■ Playing back in original channels
(straight decode)
AUDIO
MAIN
2
ZONE 2
When the straight decode mode is enabled, the unit produces
stereo sound from the front speakers for 2-channel sources such as
CDs, and produces unprocessed multichannel sounds for
multichannel sources.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
■ Playing back 2-channel sources in
multichannel (surround decoder)
The surround decoder enables unprocessed multichannel
playback from 2-channel sources. When a multichannel source is
input, it works the same way as the straight decode mode.
For details on each decoder see “Glossary” (p.115).
1
Press SUR.DECODE to select a surround decoder.
Each time you press the key, the surround decoder
changes.
VOL.
VOLUME
1
POP-UP/MENU
ON
SCREEN
Press STRAIGHT.
ProLogic
Each time you press the key, the straight decode mode is
enabled or disabled.
OPTION
bPro Logic
ENTER
L
SL
SW
C
R
SR
Uses the Dolby Pro Logic decoder suitable for all
sources.
VOL.
RETURN
STRAIGHT
DISPLAY
BAND
SW
C
R
L
SL
SR
SBL
SBR
MODE
TUNING
bPLII Music
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
9
0
STRAIGHT
ENHANCER PURE DIRECT
3
7
4
INPUT
TV VOL
bPLIIx Game
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for music.
bPLII Game
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for games.
Neo:6 Cinema
Uses the DTS Neo:6 decoder suitable for movies.
Neo:6 Music
Uses the DTS Neo:6 decoder suitable for music.
ENT
TV
MUTE
• To enable 6.1/7.1-channel playback from 5.1-channel sources when surround
back speakers are used, set “Extended Surround” (p.74) in the “Option” menu to a
setting other than “Off”.
Use the Dolby Pro Logic IIx decoder (or Dolby Pro
Logic II decoder) suitable for movies.
8
MEMORY
10
bPLII Movie
bPLIIx Music
SUR.DECODE
PRESET
bPLIIx Movie
TV CH
CODE SET
• You cannot select the Dolby Pro Logic IIx decoders when headphones are
connected or when “Surround Back” in the “Setup” menu is set to “None”.
PLAYBACK ➤ Selecting the sound mode
En
46
Enjoying pure high fidelity sound (Pure Direct)
RECEIVER
SOURCE
HDMI
1
2
3
When the Pure Direct mode is enabled, the unit plays back the
selected source with the least circuitry in order to reduce the
electrical noise from other circuitry (such as the front display). It
allows you to enjoy Hi-Fi sound quality.
4
5
V-AUX
AV
1
2
3
5
6
1
4
TUNER
USB
NET
AUDIO
MAIN
2
1
ZONE 2
TV
NET
Press PURE DIRECT.
Each time you press the key, the Pure Direct mode is
enabled or disabled.
SCENE
BD
DVD
RADIO
VOL.
PROGRAM
MUTE
TOP MENU
VOLUME
PUREDIRECT
SW
C
L
R
SL
SR
SBL
SBR
POP-UP/MENU
ON
SCREEN
Enjoying compressed music with enhanced
sound (Compressed Music Enhancer)
Compressed Music Enhancer adds depth and breadth to the
sound, allowing you to enjoy a dynamic sound close to the original
sound before it was compressed. This function can be used along
with any other sound modes.
1
Press ENHANCER.
Each time you press the key, Compressed Music Enhancer
is enabled or disabled.
“ENHANCER” lights up
OPTION
• When the Pure Direct mode is enabled, the following functions are not available.
ENTER
– Some settings for the speakers or sound programs
RETURN
DISPLAY
– Operating the on-screen and “Option” menus
BAND
– Using the multi-zone function
MODE
TUNING
PURE DIRECT
SLEEP
1
2
3
4
5
6
7
8
MEMORY
9
10
0
SW
C
R
L
SL
SR
SBL
SBR
– Viewing information on the front display (when not in operation)
MUSIC
ENHANCER PURE DIRECT
INFO
Enhancer On
VOL.
– Output from the AV OUT jacks
PRESET
SUR. DECODE STRAIGHT
MOVIE
ENHANCER
ENT
TV
• Compressed Music Enhancer does not work on signals whose sampling
rate is over 48 kHz.
ENHANCER
• You can also use “Enhancer” (p.74) in the “Option” menu to enable/disable
Compressed Music Enhancer.
INPUT
TV VOL
MUTE
TV CH
CODE SET
PLAYBACK ➤ Selecting the sound mode
En
47
Listening to FM/AM radio
RECEIVER
SOURCE
HDMI
1
2
3
4
5
You can tune into a radio station by specifying its frequency or
selecting from registered radio stations.
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
4
AUDIO
MAIN
2
TUNER
ZONE 2
SCENE
BD
DVD
TV
Selecting a frequency for reception
NET
• The radio frequencies differ depending on the country or region where the unit is
being used. The explanation of this section uses a display with frequencies used
in Europe model.
• If you cannot obtain good reception on the radio, adjust the direction of the FM/AM
antennas.
RADIO
1
Press TUNER to select “TUNER” as the input
source.
2
Press BAND to select a band (FM or AM).
VOL.
PROGRAM
MUTE
TOP MENU
FM87.50MHz
VOLUME
POP-UP/MENU
ON
SCREEN
3
OPTION
SW
C
R
L
SL
SR
SBL
SBR
Use the following keys to set a frequency.
TUNING: Increase/decrease the frequency. Hold down the
key for about a second to search stations automatically.
ENTER
RETURN
DISPLAY
BAND
BAND
MODE
TUNING
Numeric keys: Enter a frequency directly. For example, to
select 98.50 MHz, press “9”, “8”, “5” and “0” (or ENT).
PRESET
TUNING
VOL.
SUR. DECODE STRAIGHT
MOVIE
STEREO
TUNED
MUSIC
FM98.50MHz
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
5
6
7
9
0
4
8
MEMORY
10
SW
C
R
L
SL
SR
SBL
SBR
ENT
Numeric keys
“TUNED” lights up when a signal is received from a radio
station.
TV
“STEREO” also lights up when a stereo signal is received.
INPUT
TV VOL
MUTE
TV CH
CODE SET
• “Wrong Station!” appears when you enter a frequency that is out of
reception range.
• You can switch between “Stereo” (stereo) and “Mono” (monaural) for FM
radio reception in “FM Mode” (p.74) in the “Option” menu. When the signal
reception for an FM radio station is unstable, switching to monaural may
improve it.
PLAYBACK ➤ Listening to FM/AM radio
En
48
Registering favorite radio stations (presets)
RECEIVER
SOURCE
HDMI
1
2
3
You can register up to 40 radio stations as presets. Once you have
registered stations, you can easily tune into them by selecting their
preset numbers.
4
5
V-AUX
AV
1
2
3
4
■ Selecting a preset station
Tune into a registered radio station by selecting its preset number.
1
Press TUNER to select “TUNER” as the input
source.
2
Press PRESET repeatedly to select the desired radio
station.
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
TUNER
ZONE 2
• You can automatically register FM radio stations that have strong signals by using
“Auto Preset” (p.52).
SCENE
BD
DVD
TV
NET
You can also enter a preset number (01 to 40) directly by
using the numeric keys after pressing PRESET once.
■ Registering a radio station
RADIO
Select a radio station manually and register it to a preset number.
PROGRAM
MUTE
TOP MENU
VOLUME
POP-UP/MENU
ON
SCREEN
VOL.
STEREO
TUNED
SW
C
L
R
SL
SR
SBL
SBR
1
Follow “Selecting a frequency for reception” (p.48)
to tune into the desired radio station.
2
Hold down MEMORY for more than 2 seconds.
• “No Presets” appears when no radio stations are registered.
The first time that you do register a station, the selected
radio station will be registered to the preset number “01”.
Thereafter, each radio station you select will be registered
to the next empty (unused) preset number after the most
recently registered number.
• “Wrong Num.” appears when an invalid number is entered.
01:FM98.50MHz
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
4
5
6
7
8
MEMORY
9
PRESET
10
0
ENT
• “Empty” appears when a preset number not in use is entered.
• To clear preset stations, use “Clear Preset” or “Clear All Preset” (p.52).
VOL.
STEREO
TUNED
Numeric keys
MEMORY
01:FM98.50MHz
SW
C
R
L
SL
SR
SBL
SBR
TV
INPUT
TV VOL
MUTE
Preset number
TV CH
CODE SET
• To select a preset number for registering, press MEMORY once after tuning
into the desired radio station, press PRESET to select a preset number, and
then press MEMORY again.
VOL.
STEREO
TUNED
02:Empty
SW
C
R
L
SL
SR
SBL
SBR
“Empty” (not in use) or the frequency currently registered
PLAYBACK ➤ Listening to FM/AM radio
En
49
Radio Data System tuning
RECEIVER
SOURCE
• “Program Service”, “Program Type”, “Radio Text”, and “Clock Time” are not
displayed if the radio station does not provide the Radio Data System
service.
HDMI
1
2
3
(Europe model only)
4
5
Radio Data System is a data transmission system used by FM
stations in many countries. The unit can receive various types of
Radio Data System data, such as “Program Service”, “Program
Type,” “Radio Text” and “Clock Time”, when it is tuned into a Radio
Data System broadcasting station.
V-AUX
AV
1
2
3
4
5
6
1
USB
NET
AUDIO
TUNER
MAIN
2
ZONE 2
■ Displaying the Radio Data System
information
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
1
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
OPTION
Cursor keys
ENTER
RETURN
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
ENHANCER PURE DIRECT
INFO
3
4
7
8
Tune into the desired Radio Data System
broadcasting station.
• We recommend using “Auto Preset” to tune into the Radio Data System
broadcasting stations (p.52).
2
Press INFO.
■ Receiving traffic information
automatically
When “TUNER” is selected as the input source, the unit
automatically receives traffic information. To enable this function,
follow the procedure below to set the traffic information station.
1
When “TUNER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Traffic Program”
(TrafficProgram) and press ENTER.
The traffic information station search will start in 5 seconds.
Press ENTER again to start the search immediately.
Each time you press the key, the displayed item changes.
INFO
VOL.
STEREO
TUNED
SW
C
L
R
SL
SR
SBL
SBR
ProgramType
• To search upward/downward from the current frequency, press the cursor
keys (q/w) while “READY” is displayed.
• To cancel the search, press RETURN.
• Texts in parentheses denote indicators on the front display.
Item name
MEMORY
9
10
0
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
About 3 seconds later, the corresponding information for
the displayed item appears.
9850
VOL.
STEREO
TUNED
CLASSICS
SW
C
L
R
SL
SR
SBL
SBR
The following screen appears for about 3 seconds when the
search finishes.
FINISH
VOL.
STEREO
TUNED
TPFM101.30MHz
SW
C
L
R
SL
SR
SBL
SBR
Traffic information station (frequency)
Information
Program Service Program service name
Program Type
Current program type
Radio Text
Information on the current program
Clock Time
Current time
DSP Program
Sound mode name
Audio Decoder
Decoder name
Frequency
Frequency
• “TP Not Found” appears for about 3 seconds when no traffic information
stations are found.
PLAYBACK ➤ Listening to FM/AM radio
En
50
Operating the radio on the TV
RECEIVER
SOURCE
Menu
HDMI
1
2
3
You can view the radio information or select a radio station on the
TV.
4
5
V-AUX
Submenu
Function
FM
(U.K. and Europe models only)
Switches to FM/AM.
AM
AV
1
2
3
5
6
1
4
USB
NET
1
AUDIO
TUNER
MAIN
2
TUNER
Press TUNER to select “TUNER” as the input
source.
Manual Tuning
The playback screen is displayed on the TV.
ZONE 2
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
■ Playback screen
RADIO
VOLUME
1
TOP MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
Selects a frequency.
Auto (+/-)
Selects a radio station automatically.
Memory
Registers the selected station as
presets.
Direct
Enters a frequency directly.
Browse
Moves to the browse screen (preset
station list).
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
3
2
POP-UP/MENU
Tuning (+/-)
4
Menu operation keys
Cursor keys
ENTER
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
MEMORY
9
10
0
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
1 Radio station information
Displays the information of the selected radio station such as the selected
band (FM/AM) and frequency.
(Europe model only)
When tuning into a Radio Data System broadcasting station (p.50), the
Radio Data System information (“Program Service”, “Program Type,”
“Radio Text” and “Clock Time”) is also displayed.
2 Band icon
(Except for U.K. and Europe models)
Select this icon and press ENTER to switch between FM and AM.
3 TUNED/STEREO indicators
“TUNED” lights up when a signal is received from a radio station.
“STEREO” lights up when a stereo signal is received.
4 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
PLAYBACK ➤ Listening to FM/AM radio
En
51
■ Browse screen
RECEIVER
SOURCE
HDMI
1
2
3
4
5
1
V-AUX
AV
1
2
3
4
5
6
1
TUNER
USB
NET
AUDIO
MAIN
3
2
ZONE 2
2
SCENE
BD
DVD
TV
NET
RADIO
1 Preset station list
PROGRAM
MUTE
TOP MENU
VOLUME
Displays the list of preset stations. Use the cursor keys to select a preset
station and press ENTER to tune into it.
2 Preset number
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
3 Operation menu
Menu operation keys
Cursor keys
ENTER
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
Submenu
Function
Memory
Registers the current station to the
preset number selected in the list.
Auto Preset
Automatically registers FM radio
stations with strong signals (up to 40
stations).
Clear Preset
Clear the preset station selected in the
list.
Clear All Preset
Clear all the preset stations.
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
ENHANCER PURE DIRECT
3
4
7
8
Utility
MEMORY
9
10
0
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
1 Page Up
1 Page Down
Moves to the previous/next page of the
list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows
the background. Press one of the
menu operation keys to redisplay it.
• (Europe model only)
Only Radio Data System broadcasting stations are stored automatically by “Auto
Preset”.
PLAYBACK ➤ Listening to FM/AM radio
En
52
Playing back iPod music
You can play back iPod music on the unit using a USB cable
supplied with the iPod.
Connecting an iPod
Connect your iPod to the unit with the USB cable supplied with the
iPod.
• An iPod may not be detected by the unit or some features may not be compatible,
depending on the model or software version of the iPod.
• To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied)
is required. Connect the USB and composite video plugs of the Apple Composite
AV cable to the USB jack and VIDEO jack on the front panel. To select a video,
operate the iPod itself in the simple play mode (p.55).
1
Connect the USB cable to the iPod.
2
Connect the USB cable to the USB jack.
Supported iPod (as of February 2013)
• iPod touch (1st, 2nd, 3rd and 4th generation)
• iPod nano (2nd, 3rd, 4th, 5th and 6th generation)
• iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone
• iPad (3rd generation), iPad 2, iPad
The unit (front)
VOLUME
RADIO
STRAIGHT
VIDEO AUX
HDMI/
MHL 5V 1A
USB
VIDEO
5V
2.1A
VOL.
Connected
SW
C
L
R
SL
SR
SBL
SBR
• The iPod charges while it is connected to the unit. If you set the unit to standby
mode while the iPod is charging, the iPod continues to charge up to 4 hours. If
“Network Standby” (p.92) in the “Setup” menu is set to “On”, it continues to change
without limit.
• Disconnect the iPod from the USB jack when it is not in use.
PLAYBACK ➤ Playing back iPod music
En
53
Playback of iPod content
RECEIVER
SOURCE
■ Browse screen
HDMI
1
2
3
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
1
2
3
Follow the procedure below to operate the iPod contents and start
playback.
4
5
You can control the iPod with the menu displayed on the TV screen.
4
AUDIO
MAIN
2
USB
1
5
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
ZONE 2
4
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
2 List name
POP-UP/MENU
ON
SCREEN
OPTION
3 Contents list
ENTER
RETURN
DISPLAY
BAND
Displays the list of iPod content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
Menu operation keys
Cursor keys
ENTER
RETURN
4 Item number/total
MODE
TUNING
• If playback is ongoing on your iPod, the playback screen is displayed.
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
MEMORY
10
ENT
2
Use the cursor keys to select an item and press
ENTER.
If a song is selected, playback starts and the playback
screen is displayed.
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
Function
1 Page Up
Moves to the previous/next page of the list.
1 Page Down
TV
INPUT
TV VOL
MUTE
TV CH
10 Pages Up
CODE SET
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• To return to the previous screen, press RETURN.
• To operate the iPod manually to select content or control playback, switch to the
simple play mode (p.55).
PLAYBACK ➤ Playing back iPod music
En
54
■ Playback screen
RECEIVER
SOURCE
HDMI
1
2
3
1
2
4
5
V-AUX
AV
1
2
3
■ Operating the iPod itself or remote control
(simple play)
1
4
5
TUNER
MAIN
6
1
USB
NET
3
2
To display the TV menu screen, press MODE again.
ZONE 2
2
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
Display the current repeat/shuffle settings (p.56) and playback status
(such as play/pause).
2 Playback information
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
5
6
9
0
3
7
External device
operation keys
MODE
Displays the artist name, album name, song title, and elapsed/remaining
time.
Use the cursor keys to select scrollable information.
10
Operational remote control
keys
Function
Cursor keys
Select an item.
ENTER
Confirms the selection.
RETURN
Returns to the previous screen.
a
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
4
8
External device
operation keys
d
Starts playback or stops playback
temporarily.
s
Stops playback.
Submenu
Function
a
Resumes playback from pause.
g
s
Stops playback.
h
d
Stops playback temporarily.
j
f
ENT
TV
INPUT
TV VOL
Operate your iPod itself or the remote control to
start playback.
3 Operation menu
MEMORY
MUTE
Press MODE to switch to the simple play mode.
The TV menu screen turns off and iPod operations are
enabled.
AUDIO
TV CH
CODE SET
Play Control
Skips forward/backward.
Searches forward/backward (by holding
down).
f
g
h
j
Skips forward/backward.
Searches forward/backward (by holding
down).
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
• You can also use the external device operation keys on the remote control to
control playback.
PLAYBACK ➤ Playing back iPod music
En
55
■ Repeat/shuffle settings
RECEIVER
SOURCE
You can configure the repeat/shuffle settings of your iPod.
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
USB
NET
• During simple play, configure the repeat/shuffle settings directly on your iPod or
press MODE to display the TV menu screen and then follow the procedure below.
4
AUDIO
TUNER
MAIN
2
ZONE 2
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
• To return to the previous screen during menu operations, press RETURN.
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
OPTION
Cursor keys
ENTER
RETURN
BAND
MODE
MODE
TUNING
• Texts in parentheses denote indicators on the front display.
3
Use the cursor keys (e/r) to select a setting.
Item
PRESET
Setting
Function
Off (Off)
Turns off the shuffle function.
Songs (Songs)
Plays back songs in random order. “x”
appears in the TV screen.
Albums
(Albums)
Plays back albums in random order. “x”
appears in the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears in the TV screen.
All (All)
Plays back all songs repeatedly. “v”
appears in the TV screen.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
4
5
6
7
8
Shuffle
(Shuffle)
MEMORY
9
10
0
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
Repeat
(Repeat)
4
To exit from the menu, press OPTION.
PLAYBACK ➤ Playing back iPod music
En
56
Playing back music stored on a USB storage device
RECEIVER
SOURCE
HDMI
1
2
3
4
5
You can play back music files stored on a USB storage device on
the unit. Refer to the instruction manuals for the USB storage
device for more information.
V-AUX
AV
1
2
3
5
6
1
4
USB
NET
AUDIO
TUNER
MAIN
2
USB
• If the USB storage device contains many files, it may take time to load the them. In
this case, “Loading...” appears in the front display.
The unit supports USB mass storage class devices (FAT16 or
FAT32 format).
ZONE 2
• Stop playback of the USB storage device before disconnect it from the USB jack.
• Disconnect the USB storage device from the USB jack when it is not in use.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
• The unit supports WAV (PCM format only), MP3, WMA, MPEG-4 AAC and FLAC
files (1- or 2-channel audio only).
• The unit is compatible with sampling rate of up to 192 kHz for WAV and FLAC
files, and 48 kHz for other files.
• Some features may not be compatible, depending on the model or manufacturer
of the USB storage device.
• Digital Rights Management (DRM) contents cannot be played back.
ENTER
Connecting a USB storage device
RETURN
• You cannot connect the PC to the USB jack of the unit.
Playback of USB storage device contents
Follow the procedure below to operate the USB storage device
contents and start playback.
You can control the USB memory device with the menu displayed
on the TV screen.
DISPLAY
BAND
1
MODE
TUNING
PRESET
Connect the USB storage device to the USB jack.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
ENHANCER PURE DIRECT
1
Press USB to select “USB” as the input source.
The browse screen is displayed on the TV.
The unit (front)
RADIO
STRAIGHT
VIDEO AUX
MEMORY
10
ENT
TV
INPUT
HDMI/
MHL 5V 1A
TV VOL
MUTE
VIDEO
5V
2.1A
TV CH
CODE SET
• If playback is ongoing on your USB storage device, the playback screen is
displayed.
USB storage device
USB
Connected
VOL.
SW
C
L
R
SL
SR
SBL
SBR
PLAYBACK ➤ Playing back music stored on a USB storage device
En
57
2
RECEIVER
SOURCE
HDMI
1
2
3
4
5
AV
2
3
5
6
1
TUNER
USB
NET
1
2
3
If a song is selected, playback starts and the playback
screen is displayed.
V-AUX
1
■ Browse screen
Use the cursor keys to select an item and press
ENTER.
4
AUDIO
MAIN
5
2
ZONE 2
4
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
2 List name
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
3 Contents list
Menu operation keys
Cursor keys
ENTER
RETURN
Displays the list of USB storage device contents. Use the cursor keys to
select an item and press ENTER to confirm the selection.
• To return to the previous screen, press RETURN.
• Files not supported by the unit cannot be selected.
• If the unit detects a series of unsupported files (such as images and hidden
files) during playback, playback stops automatically.
4 Item number/total
5 Operation menu
PRESET
SUR. DECODE STRAIGHT
MOVIE
Display the current repeat/shuffle settings (p.59) and playback status
(such as play/pause).
MUSIC
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
Menu
Moves to the previous/next page of the list.
MEMORY
10
ENT
TV
Function
1 Page Up
1 Page Down
INPUT
TV VOL
MUTE
TV CH
CODE SET
10 Pages Up
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
58
■ Playback screen
RECEIVER
SOURCE
HDMI
1
2
3
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
You can configure the repeat/shuffle settings for playback of USB
storage device contents.
1
2
4
5
■ Repeat/shuffle settings
4
AUDIO
MAIN
3
2
ZONE 2
1
When “USB” is selected as the input source, press
OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
OPTION
ENTER
RETURN
DISPLAY
BAND
OPTION
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
10
ENT
3
Displays the artist name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Play Control
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
Shuffle
(Shuffle)
Repeat
(Repeat)
TV
f
INPUT
TV VOL
MUTE
TV CH
CODE SET
g
Use the cursor keys (e/r) to select a setting.
Item
3 Operation menu
ENHANCER PURE DIRECT
MEMORY
• Texts in parentheses denote indicators on the front display.
2 Playback information
POP-UP/MENU
ON
SCREEN
• To return to the previous screen during menu operations, press RETURN.
Display the current repeat/shuffle settings (p.59) and playback status
(such as play/pause).
Skips forward/backward.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
4
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order. “x” appears on
the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly. “v” appears on the
TV screen.
To exit from the menu, press OPTION.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
PLAYBACK ➤ Playing back music stored on a USB storage device
En
59
Playing back music stored on media servers (PCs/NAS)
RECEIVER
SOURCE
HDMI
1
2
3
4
5
1
2
3
5
6
1
USB
NET
Playback of PC music contents
You can play back music files stored on your PC or
DLNA-compatible NAS on the unit.
V-AUX
AV
4
Follow the procedure below to operate the PC music contents and
start playback.
AUDIO
TUNER
MAIN
2
NET
ZONE 2
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
• To use this function, the unit and your PC must be connected to the same router
(p.31). You can check whether the network parameters (such as the IP address)
are properly assigned to the unit in “Network” (p.98) in the “Information” menu.
• The unit supports playback of WAV (PCM format only), MP3, WMA, MPEG-4 AAC
and FLAC files (1- or 2-channel audio only).
RADIO
• The unit is compatible with sampling rates of up to 192 kHz for WAV and FLAC
files, and 48 kHz for other files.
VOLUME
You can control the PC/NAS with the menu displayed on the TV
screen.
1
The browse screen is displayed on the TV.
• To play back FLAC files, you need to install server software that supports sharing
of FLAC files via DLNA on your PC or use a NAS that supports FLAC files.
TOP MENU
POP-UP/MENU
ON
SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
Media sharing setup
To play back music files stored on your PC or DLNA-compatible
NAS, first you need to configure the media sharing setting on each
music server.
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
5
6
9
0
ENHANCER PURE DIRECT
3
7
4
8
MEMORY
10
ENT
TV
■ For a PC with Windows Media Player
installed
1
INPUT
TV VOL
MUTE
Press NET repeatedly to select “SERVER” as the
input source.
TV CH
Check that Windows Media Player 11 or later is
installed on your PC.
CODE SET
2
In the media sharing settings, enable media sharing
and allow media to be shared with the device.
• If playback of a music file selected from the unit is ongoing on your PC, the
playback screen is displayed.
2
Use the cursor keys to select a music server and
press ENTER.
■ For a PC or a NAS with other DLNA server
software installed
Refer to the instruction manual for the device or software and
configure the media sharing settings.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
60
3
RECEIVER
SOURCE
HDMI
1
2
3
4
5
AV
2
3
5
6
1
TUNER
USB
NET
■ Browse screen
1
2
3
If a song is selected, playback starts and the playback
screen is displayed.
V-AUX
1
Use the cursor keys to select an item and press
ENTER.
4
AUDIO
MAIN
5
2
ZONE 2
4
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
OPTION
3 Contents list
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
Menu operation keys
Cursor keys
ENTER
RETURN
• To return to the previous screen, press RETURN.
Displays the list of PC content. Use the cursor keys to select an item and
press ENTER to confirm the selection.
• Files not supported by the unit cannot be selected.
• If the unit detects a series of unsupported files (such as images and hidden
files) during playback, playback stops automatically.
4 Item number/total
5 Operation menu
PRESET
SUR. DECODE STRAIGHT
MUSIC
ENHANCER PURE DIRECT
INFO
2 List name
POP-UP/MENU
ON
SCREEN
MOVIE
Display the current repeat/shuffle settings (p.62) and playback status
(such as play/pause).
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
SLEEP
1
2
3
4
5
6
7
8
9
0
Menu
Moves to the previous/next page of the list.
MEMORY
10
ENT
TV
Function
1 Page Up
1 Page Down
INPUT
TV VOL
MUTE
TV CH
CODE SET
10 Pages Up
Moves 10 pages forward/backward.
10 Pages Down
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
61
■ Playback screen
RECEIVER
SOURCE
HDMI
1
2
3
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
You can configure the repeat/shuffle settings for the playback of PC
music content.
1
2
4
5
■ Repeat/shuffle settings
4
AUDIO
MAIN
3
2
ZONE 2
1
When “SERVER” is selected as the input source,
press OPTION.
2
Use the cursor keys to select “Shuffle” (Shuffle) or
“Repeat” (Repeat) and press ENTER.
SCENE
BD
DVD
TV
NET
RADIO
1 Status indicators
PROGRAM
MUTE
TOP MENU
VOLUME
2 Playback information
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
OPTION
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
Displays the artist name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
10
ENT
Play Control
• Text in parentheses denotes indicators on the front display.
3
Submenu
Function
a
Resumes playback from pause.
s
Stops playback.
d
Stops playback temporarily.
Shuffle
(Shuffle)
Repeat
(Repeat)
TV
f
INPUT
TV VOL
MUTE
TV CH
CODE SET
g
Use the cursor keys (e/r) to select a setting.
Item
3 Operation menu
ENHANCER PURE DIRECT
MEMORY
• To return to the previous screen during menu operations, press RETURN.
Display the current repeat/shuffle settings (p.62) and playback status
(such as play/pause).
Skips forward/backward.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
4
Setting
Function
Off (Off)
Turns off the shuffle function.
On (On)
Plays back songs in the current album
(folder) in random order. “x” appears on
the TV screen.
Off (Off)
Turns off the repeat function.
One (One)
Plays back the current song repeatedly.
“c” appears on the TV screen.
All (All)
Plays back all songs in the current album
(folder) repeatedly. “v” appears on the
TV screen.
To exit from the menu, press OPTION.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
• You can also use a DLNA-compatible Digital Media Controller (DMC) to control
playback. For details, see “DMC Control” (p.77).
PLAYBACK ➤ Playing back music stored on media servers (PCs/NAS)
En
62
Listening to Internet radio
RECEIVER
SOURCE
HDMI
1
2
3
4
5
You can listen to Internet radio stations from all over the world.
V-AUX
You can control the Internet radio with the menu displayed on the
TV screen.
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
The browse screen is displayed on the TV.
• To use this function, the unit must be connected to the Internet (p.31). You can
check whether the network parameters (such as the IP address) are properly
assigned to the unit in “Network” (p.98) in the “Information” menu.
SCENE
TV
NET
Press NET repeatedly to select “NET RADIO” as the
input source.
NET
ZONE 2
BD
DVD
1
RADIO
• You may not be able to receive some Internet radio stations.
• The unit uses the vTuner Internet radio station database service.
PROGRAM
MUTE
TOP MENU
VOLUME
• This service may be discontinued without notice.
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
Cursor keys
ENTER
RETURN
2
Use the cursor keys to select an item and press
ENTER.
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
9
0
If an Internet radio station is selected, playback starts and
the playback screen is displayed.
ENHANCER PURE DIRECT
4
8
MEMORY
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
• To return to the previous screen, press RETURN.
PLAYBACK ➤
Listening to Internet radio
En
63
■ Browse screen
RECEIVER
SOURCE
HDMI
1
2
3
1
2
3
4
5
V-AUX
AV
1
2
3
5
6
1
TUNER
USB
NET
■ Playback screen
4
1
2
AUDIO
MAIN
3
5
2
ZONE 2
4
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
INFO
SLEEP
1
2
5
6
4 Item number/total
5 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
Menu
Function
4
7
8
10
0
Displays the station name, album name, song title, and elapsed time.
Use the cursor keys (q/w) to select scrollable information.
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
Menu
Submenu
Function
Play Control
s
Stops playback.
Browse
Moves to the browse screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu
operation keys to redisplay it.
1 Page Down
10 Pages Up
Moves 10 pages forward/backward.
ENT
TV
10 Pages Down
INPUT
TV VOL
1 Page Up
Moves to the previous/next page of the list.
3
MEMORY
MUTE
2 Playback information
MUSIC
ENHANCER PURE DIRECT
9
2 List name
Displays the list of Internet radio content. Use the cursor keys to select an
item and press ENTER to confirm the selection.
OPTION
ENTER
1 Playback indicator
3 Contents list
POP-UP/MENU
ON
SCREEN
1 Playback indicator
TV CH
CODE SET
Return
Returns to the higher-level list.
Now Playing
Moves to the playback screen.
Screen Off
Closes the screen display and shows the
background. Press one of the menu operation keys
to redisplay it.
• You can also use the external device operation key (s) on the remote control to
stop playback.
• Some information may not be available depending on the station.
• You can register your favorite Internet radio stations to the “Bookmarks” folder by
selecting “NET RADIO” as the input source on the unit and then accessing the
following website with the web browser on your PC. To use this feature, you need
the vTuner ID of the unit and your e-mail address to create your personal account.
You can check the vTunerID (MAC address of the unit) in “Network” (p.98) in the
“Information” menu.
http://yradio.vtuner.com/
PLAYBACK ➤
Listening to Internet radio
En
64
Playing back iTunes/iPod music via a network (AirPlay)
The AirPlay function allows you to play back iTunes/iPod music on
the unit via network.
Playback of iTunes/iPod music contents
Follow the procedure below to play back iTunes/iPod music
contents on the unit.
iTunes
PC
1
Router
The unit
Starts playback
on iTunes
or iPod
Turn on the unit, and start iTunes on the PC or
display the playback screen on the iPod.
If the iTunes/iPod recognizes the unit, the AirPlay icon
(
) appears.
iTunes (example)
iPod (example)
Playback starts
iPod
• To use this function, the unit and your PC or iPod must be connected to the same
router (p.31). You can check whether the network parameters (such as the IP
address) are properly assigned to the unit in “Network” (p.98) in the “Information”
menu.
Supported iTunes/iPod (as of February 2013)
• If the icon does not appear, check whether the unit and PC/iPod are
connected to the router properly.
2
• iTunes 10.2.2 or later (Windows/Mac)
On the iTunes/iPod, click (tap) the AirPlay icon and
select the unit (network name of the unit) as the
audio output device.
• iPod touch, iPhone or iPad with iOS 4.3.3 or later
iTunes (example)
iPod (example)
Network name of the unit
3
Select a song and start playback.
The unit automatically selects “AirPlay” as the input source and
starts playback.
The playback screen is displayed on the TV.
PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay)
En
65
Menu
RECEIVER
SOURCE
• The playback screen is available only when your TV is connected to the unit via
HDMI.
HDMI
1
2
3
4
5
V-AUX
Play Control
AV
1
2
3
5
6
1
4
USB
NET
• You can turn on the unit automatically when starting playback on iTunes or iPod by
setting “Network Standby” (p.92) in the “Setup” menu to “On”.
AUDIO
TUNER
MAIN
2
• You can edit the network name (the unit’s name on the network) displayed on
iTunes/iPod in “Network Name” (p.93) in the “Setup” menu.
ZONE 2
TV
NET
PROGRAM
MUTE
RADIO
• You can adjust the unit’s volume from the iTunes/iPod during playback. To disable
volume controls from iTunes/iPod, set “Volume Interlock” (p.77) in the “Input” menu
to “Off”.
VOLUME
Caution
TOP MENU
Function
a
Resumes playback from pause.
d
Stops playback temporarily.
f
g
Screen Off
• If you select the other input source on the unit during playback, playback on the
iTunes/iPod stops automatically.
SCENE
BD
DVD
Submenu
Skips forward/backward.
Closes the screen display and shows the
background. Press one of the menu operation
keys to redisplay it.
• You can also use the external device operation keys (a, s, d, f, g) on
the remote control to control playback.
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
RETURN
DISPLAY
BAND
Menu operation keys
Cursor keys
ENTER
RETURN
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
5
6
7
9
0
• When you use iTunes/iPod controls to adjust volume, the volume may be
unexpectedly loud. This could result in damage to the unit or speakers. If the
volume suddenly increases during playback, stop playback on the iTunes/iPod
immediately.
iTunes (example of English version)
■ Playback screen
1
2
4
8
3
MEMORY
10
• To control iTunes playback with the remote control of the unit, you need to
configure the iTunes preferences to enable iTunes control from remote speakers
in advance.
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
Check this box
1 Playback indicator
2 Playback information
Displays the artist name, album name, song title, and elapsed/remaining
time.
Use the cursor keys (q/w) to select scrollable information.
3 Operation menu
Press the cursor key (r) and then use the cursor keys (q/w) to select an
item. Press ENTER to confirm the selection.
To close the submenu, press RETURN.
PLAYBACK ➤ Playing back iTunes/iPod music via a network (AirPlay)
En
66
Playing back music in multiple rooms (multi-zone)
The multi-zone function allows you to play back different input
sources in the room where the unit is installed (main zone) and in
another room (Zone2).
For example, while you are watching TV in the living room (main
zone), another person can listen to radio in the study room (Zone2).
Preparing Zone2
Connect the device that will be used in Zone2 to the unit. The
connection method varies depending on the amplifier being used
(the unit or an external amplifier).
Caution
• Remove the unit’s power cable from the AC wall outlet before connecting
speakers or an external amplifier.
• Ensure that the core wires of the speaker cable do not touch one another or
come into contact with the unit’s metal parts. Doing so may damage the unit
or the speakers. If the speaker cables short circuit, “Check SP Wires” will
appear on the front display when the unit is turned on.
Study room (Zone2)
Living room (main zone)
• Analog audio sources (including FM/AM radio), and USB and network sources
can be output to Zone2. To listen to the playback of an external device in Zone2,
you need to connect the device to the AUDIO jacks (AV 5–6 or AUDIO 1–2 jacks)
of the unit.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
67
■ Using the unit’s internal amplifier
■ Using an external amplifier
Connect the speakers placed in Zone2 to the unit with speaker
cables.
Connect the external amplifier (with volume control) placed in
Zone2 to the unit with a stereo pin cable.
To utilize the EXTRA SP terminals for Zone2 speakers, set “Power
Amp Assign” (p.85) in the “Setup” menu to “7ch +1ZONE” after
connecting the power cable to an AC wall outlet.
The unit (rear)
DC OUT
5V 0.5A
NETWORK
HDMI 1
HDMI OUT
(NET)
(BD/DVD)
ARC
PTICAL
AM
VIDEO
FM
(TV)
AV4
EXTRA SP
ZONE2/F.PRESENCE
CO
OAXIAL
(RADIO)
ANTENNA
AV3
The unit (rear)
Y
ZONE2 OUT jacks
PR
PB
AV2
SPEAKERS
VIDEO
VIDEO
PTICAL
CLASS 2 WIRING CABLAGE CLASSE 2
FRONT
CENTER
SURROUND
SURROUND BACK/BI-AMP
AV 1
MONITOR
COMPONENT VIDEO
L
SINGLE
R
AUDIO 1
AUDIO 2
ZONE 2
AV 5
AV 6
AV OUT
ZONE OUT
External amplifier
Audio input
(analog stereo)
ZONE 2
ZONE OUT
1
2
FL
FR
L
Q
9
W
R
3
1
4
9
5
6
7
2
3
4
Zone2
AUDIO
5
6
7
Zone2
Main zone
Main zone
• When Zone2 output is enabled (p.70), the surround back speakers in the main
zone do not output sound.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
68
■ Operating the unit from Zone2
(remote connection)
Remote connections between Yamaha products
You can operate the unit and external devices from Zone2 using the
supplied remote control if you connect an infrared signal
receiver/emitter to the unit’s REMOTE IN/OUT jacks.
An infrared signal transmitter is not required if you are using
Yamaha products that support remote connections, as the unit
does. You can transmit remote control signals by connecting the
REMOTE IN/OUT jacks with monaural mini-jack cables and an
infrared signal receiver.
REMOTE IN/OUT jacks
• To operate external devices with the supplied remote control, you must register a
remote control code for each device before using (p.102).
REMOTE IN/OUT jacks
DC OUT
5V 0.5A
IN
NETWORK
HDMI OUT
(NET)
ARC
REMOTE
REMOTE
OPTICAL
OUT
REMOTE
Infrared signal
receiver
OUT
OUT
IN
OUT
REMOTE
IN
TRIGGER OUT
12V 0.1A
REMOTE IN/OUT jacks
IN
Yamaha products
(up to six, including the unit)
AM
VIDEO
(TV)
AV4
COAXIAL
(RADIO)
ANTENNA
AV3
Y
PR
PB
AV2
VIDEO
OPTICAL
AV 1
Remote control
COMPONENT VIDEO
AUDIO 2
AUDIO 1
AV 5
AV 6
AV OUT
Zone2
The unit (rear)
Infrared signal
transmitter
Infrared signal
receiver
External device
(such as a CD player)
Remote control
Zone2
Main zone
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
69
RECEIVER
SOURCE
RECEIVER z
Controlling Zone2
4
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
5
6
1
USB
NET
AUDIO
TUNER
MAIN
2
AV 5–6
AUDIO 1–2
TUNER
USB
NET
1
2
ZONE 2
MAIN/ZONE2
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
VOLUME
MUTE
VOLUME
Set MAIN/ZONE2 to “ZONE2”.
Refer to the instruction manual for the external device.
Press RECEIVER z.
For details on the following operations, see the
corresponding pages.
Each time you press the key, Zone2 output is enabled or
disabled.
• Listening to FM/AM radio (p.48)
• Playing back iPod music (p.53)
When Zone2 output is enabled, “ZONE2” lights up in the
front display.
SCENE
BD
DVD
3
• Playing back music stored on a USB storage device
(p.57)
Use the following keys to select an input source.
AV 5–6: AV 5–6 (AUDIO) jacks
• Playing back music stored on media servers (PCs/NAS)
(p.60)
AUDIO 1–2: AUDIO 1–2 jacks
• Listening to Internet radio (p.63)
TUNER: FM/AM radio
• Playing back iTunes/iPod music via a network (AirPlay)
(p.65)
POP-UP/MENU
ON
SCREEN
OPTION
ENTER
USB: USB jack (on the front panel)
RETURN
NET: NETWORK jack (press repeatedly to select a desired
network source)
DISPLAY
BAND
MODE
TUNING
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
5
6
9
0
SLEEP
3
7
4
8
MEMORY
10
ENT
TV
Start playback on the external device or select a
radio station.
• You cannot select USB and network sources exclusively for each zone. For
example, if you select “SERVER” for Zone2 when “USB” is selected for the
main zone, the input source for the main zone also switches to “SERVER”.
• The on-screen operations are not available for Zone2. Use the front display
to control Zone2.
• AirPlay is available in Zone2 only when AirPlay playback is ongoing in the
main zone.
• To set the sleep timer (120 min, 90 min, 60 min, 30 min, off), press SLEEP
repeatedly. The Zone2 output will be disabled after a specified period of
time.
INPUT
TV VOL
MUTE
TV CH
CODE SET
• To adjust the Zone2 volume, press VOLUME or MUTE (when using the
unit’s internal amplifier). When using an external amplifier, use the volume
control on it.
Caution
• To avoid unexpected noise, never play back DTS-CDs in Zone2.
PLAYBACK ➤
Playing back music in multiple rooms (multi-zone)
En
70
Viewing the current status
RECEIVER
SOURCE
HDMI
1
2
3
4
5
V-AUX
AV
1
2
3
4
Switching information on the front display
Viewing the status information on the TV
1
1
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
ZONE 2
Press INFO.
Each time you press the key, the displayed item changes.
SCENE
BD
DVD
TV
TOP MENU
VOLUME
L
SL
SW
C
R
SR
Item name
Input source
Volume
Audio format/
Decoder
Sound
mode
About 3 seconds later, the corresponding information for
the displayed item appears.
POP-UP/MENU
ON
SCREEN
Compressed Music Enhancer status
RADIO
AudioDecoder
MUTE
The following information is displayed on the TV.
VOL.
NET
PROGRAM
Press DISPLAY.
OPTION
VOL.
ENTER
ProLogic
RETURN
DISPLAY
L
SL
SW
C
R
SR
DISPLAY
Information
BAND
MODE
TUNING
PRESET
CINEMA DSP status
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
ENHANCER PURE DIRECT
5
6
9
0
INFO
3
7
ENT
TV
INPUT
TV VOL
MUTE
Input source group
Item
HDMI 1–5
V-AUX
AV 1–6
AUDIO 1–2
Input (input source name), DSP Program (sound
mode name), Audio Decoder (decoder name*)
2
To close the information display, press DISPLAY.
8
MEMORY
10
• Available items vary depending on the selected input source. The displayed
item can also be applied separately to each input source group.
4
TV CH
CODE SET
Frequency (frequency), DSP Program (sound mode
name), Audio Decoder (decoder name*)
TUNER
USB
SERVER
AirPlay
NET RADIO
* (Europe model only)
Radio Data System data is also available when the unit is
tuned into a Radio Data System broadcasting station (p.50).
Song (song title), Artist (artist name), Album (album
name), DSP Program (sound mode name), Audio
Decoder (decoder name*)
* During simple playback of iPod:
Input (input source name), DSP Program (sound mode
name), Audio Decoder (decoder name*)
Song (song title), Album (album name), Station
(station name), DSP Program (sound mode name),
Audio Decoder (decoder name*)
* The name of the audio decoder currently activated is displayed. If no audio
decoder is activated, “Decoder Off” appears.
PLAYBACK ➤ Viewing the current status
En
71
Configuring playback settings for different playback sources (Option menu)
You can configure separate playback settings for different playback sources. This
menu is available on the front panel (or on the TV screen), allowing you to easily
configure settings during playback.
1
Press OPTION.
Option menu items
• Available items vary depending on the selected input source.
• Text in parentheses denotes indicators on the front display.
OPTION
ToneControl
VOL.
SW
C
L
R
SL
SR
SBL
SBR
Front display
Item
Function
Page
Tone Control
(Tone Control)
Adjusts the high-frequency range and low-frequency
range of sounds.
73
Adaptive DRC
(Adaptive DRC)
Sets whether the dynamic range (from maximum to
minimum) is automatically adjusted when the volume
is adjusted.
73
CINEMA DSP 3D Mode
(CINEMA DSP 3D)
Enables/disables CINEMA DSP 3D.
73
Dialogue Level
Adjusts the volume of dialogue sounds.
Dialogue Adjust (Dialog Lvl)
(Dialog Adjust) Dialogue Lift
Adjusts the perceived height of dialogue sounds.
(Dialog Lift)
TV screen
2
Use the cursor keys to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
4
Use the cursor keys (e/r) to select a setting.
To exit from the menu, press OPTION.
Extended Surround
(EXTD Surround)
Volume Trim
(Volume Trim)
Input Trim
(In.Trim)
73
73
Selects how to play back 5.1- to 7.1-channel sources
when surround back speakers are used.
74
Corrects volume differences between input sources.
74
Subwoofer
Fine-adjusts the subwoofer volume.
Trim (SW.Trim)
74
Enhancer
(Enhancer)
Enables/disables Compressed Music Enhancer.
74
Video Mode
(Video Mode)
Enables/disables the video signal processing
settings configured in the “Setup” menu.
74
FM Mode
(FM Mode)
Switches between stereo and monaural for FM radio
reception.
74
Traffic Program
(TrafficProgram)
(Europe model only)
Automatically searches for a traffic information
station.
50
Repeat
(Repeat)
Configures the repeat setting for the iPod (p.56),
USB storage device (p.59), or media server (p.62).
—
Shuffle
(Shuffle)
Configures the shuffle setting for the iPod (p.56),
USB storage device (p.59), or media server (p.62).
—
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
72
■ Tone Control (Tone Control)
■ CINEMA DSP 3D Mode (CINEMA DSP 3D)
Adjusts the high-frequency range (Treble) and low-frequency range (Bass) of sounds.
Enables/disables CINEMA DSP 3D (p.43). If this function is set to “On”, CINEMA DSP
3D functions with the selected sound programs (except 2ch Stereo and 7ch Stereo).
Choices
Treble (Treble), Bass (Bass)
Settings
Setting range
-6.0 dB to Bypass (Bypass) to +6.0 dB, *0.5 dB increments
Default
Bypass (Bypass)
On (On) (default)
Enables CINEMA DSP 3D.
Off (Off)
Disables CINEMA DSP 3D.
■ Dialogue Adjust (Dialog Adjust)
Adjusts the volume or perceive height of dialogue sounds.
• If you set an extreme value, sounds may not match those from other channels.
❑ Dialogue Level (Dialog Lvl)
Adjusts the volume of dialogue sounds. If dialogue sounds cannot be heard clearly, you
can turn up its volume by increasing this setting.
Adjusting with the front panel controls
a Press TONE CONTROL to select “Treble” or “Bass”.
Setting range
0 to 3
b Press PROGRAM to make an adjustment.
Default
0
■ Adaptive DRC (Adaptive DRC)
Sets whether the dynamic range (from maximum to minimum) is automatically adjusted
when the volume level is adjusted. When it is set to “On”, it is useful for listening to
playback at a low volume at night.
❑ Dialogue Lift (Dialog Lift)
Adjusts the perceived height of dialogue sounds. If the dialogue sounds as if it is coming
from below the TV screen, you can raise its perceived height by increasing this setting.
Settings
On (On)
Automatically adjusts the dynamic range.
Off (Off) (default)
The dynamic range is not automatically adjusted.
• This setting is available only when one of the following conditions is met.
– One of the sound programs (except for 2ch Stereo and 7ch Stereo) is selected when presence speakers
are used.
If “On” is selected, the dynamic range becomes narrow at a low volume and wide at a
high volume.
On
Off
Input level
Volume: high
Output level
Output level
Volume: low
– Virtual Presence Speaker (VPS) (p.43) is working.
(You may hear dialogue sounds from the surround speakers depending on the listening position.)
Setting range
0 to 5 (The bigger the value the higher the position)
Default
0
On
Off
Input level
Ideal position
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
73
■ Extended Surround (EXTD Surround)
❑ Subwoofer Trim (SW.Trim)
Selects how to play back 5.1- to 7.1-channel sources when surround back speakers
are used.
Fine-adjusts the subwoofer volume.
Settings
Auto (Auto)
(default)
Automatically selects the most suitable decoder if signals that contain
surround back channel signals are input, and reproduces the signals
in 6.1- or 7.1-channel. If two surround back speakers are connected,
the unit reproduces the 5.1-channel signals in 7.1-channel.
bPLIIx Movie
(bPLIIxMo)
Always reproduces signals in 7.1-channel using the Dolby Pro Logic
IIx Movie decoder. This setting is available only when two surround
back speakers are connected.
bPLIIx Music
(bPLIIxMu)
Always reproduces signals in 6.1- or 7.1-channel using the Dolby Pro
Logic IIx Music decoder. This setting is available only when one or two
surround back speakers are connected.
EX/ES (EX/ES)
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Off (Off)
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
• Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing
back those sources.
Enables/disables Compressed Music Enhancer (p.47).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.47).
Settings
Off (Off)
Disables Compressed Music Enhancer.
On (On)
Enables Compressed Music Enhancer.
Default
TUNER, USB, (network sources): On (On)
Others: Off (Off)
Settings
❑ Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Default
0.0 dB
■ Enhancer (Enhancer)
Enables/disables the video signal processing (resolution and aspect ratio) settings
configured in “Processing” (p.89) in the “Setup” menu.
Fine-adjusts volume difference between input sources or subwoofer volume.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Default
0.0 dB
■ Video Mode (Video Mode)
■ Volume Trim (Volume Trim)
• This setting is applied separately to each input source.
Setting range
-6.0 dB to +6.0 dB (0.5 dB increments)
Processing
(Processing)
Enables the video signal processing.
Direct (Direct)
(default)
Disables the video signal processing.
■ FM Mode (FM Mode)
Switches between stereo and monaural for FM radio reception.
Settings
Stereo (Stereo)
(default)
Receives FM radio in stereo sounds.
Mono (Mono)
Receives FM radio in monaural sounds.
PLAYBACK ➤ Configuring playback settings for different playback sources (Option menu)
En
74
CONFIGURATIONS
Configuring input sources (Input menu)
4
Use the cursor keys (q/w) to select an item and press ENTER.
You can change the input source settings using the TV screen.
1
2
Press ON SCREEN.
Use the cursor keys to select “Input” and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
3
5
6
Use the cursor keys (e/r) to select an input source to be configured
and press the cursor key (q).
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Input menu items
• Available items vary depending on the selected input source.
The input source of the unit also changes.
• You can still switch the input source by using cursor keys (e/r) after Step 3.
Item
Function
Rename/Icon Select
Changes the input source name and icon.
76
Audio In
Combines the video jack of the selected input source with an
audio jack of others.
76
Decoder Mode
Sets the format of digital audio playback to DTS.
76
Volume Interlock
Enables/disables volume controls from iTunes/iPod via
AirPlay.
77
Video Out
Selects a video to be output with the audio input source.
77
DMC Control
Selects whether to allow a DLNA-compatible Digital Media
Controller (DMC) to control playback.
77
CONFIGURATIONS
Page
➤ Configuring input sources (Input menu)
En
75
■ Rename/Icon Select
■ Audio In
Changes the input source name and icon displayed on the front display or TV screen.
Combines the video jack of the selected input source with an audio jack of others. For
example, use this function in the following cases.
Input sources
HDMI 1–5, V-AUX, AV 1–6, AUDIO 1–2, USB
■ Setup procedure
1
Use the cursor keys (e/r) to select a template and press the cursor key (w).
• Connecting a playback device that supports HDMI video output, but not HDMI audio
output
• Connecting a playback device that has component video jacks and analog stereo
jacks (such as game consoles)
Input sources
HDMI 1–5, AV 1–2
■ Setup procedure
(To input audio through a digital optical jack)
Select “AV1” or “AV4” and connect the device to the unit’s corresponding audio jacks
with a digital optical cable.
(To input audio through a digital coaxial jack)
• You cannot change the template or icon for “USB” when an iPod is connected.
2
3
4
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
Select “AV2” or “AV3” and connect the device to the unit’s corresponding audio jacks
with a digital coaxial cable.
(To input audio through analog audio jacks)
Select “AV5”, “AV6”, “AUDIO1”, or “AUDIO2”, and connect the device to the unit’s
corresponding audio jacks with a stereo pin cable.
■ Decoder Mode
Sets the format of digital audio playback to “DTS”.
For example, if the unit does not detect DTS audio and outputs noise, set “Decoder
Mode” to “DTS”.
Input sources
HDMI 1–5, V-AUX, AV 1–4
Settings
Auto (default)
Automatically selects an audio format to match the input audio signal.
DTS
Selects DTS only. (Other audio signals are not reproduced.)
• To clear the entry, select “CLEAR”.
5
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
6
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring input sources (Input menu)
En
76
■ Volume Interlock
Enables/disables volume controls from iTunes/iPod via AirPlay.
Configuring the SCENE function (Scene menu)
You can change the settings of the SCENE function (p.41) using the TV screen.
Input sources
AirPlay
Settings
Off
Disables volume controls from iTunes/iPod.
Limited (default)
Enables volume controls from iTunes/iPod within the limited range
(-80 dB to 0 dB and mute).
Full
Enables volume controls from iTunes/iPod in the full range (-80 dB to
+16.5 dB and mute).
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select a scene to be configured and
press the cursor key (q).
Use the cursor keys to select “Scene” and press ENTER.
■ Video Out
Selects a video to be output with the audio input source.
Input sources
TUNER, (network sources)
Settings
Off (default)
Does not output video.
HDMI 1–5, AV 1–6,
V-AUX
Outputs video input through the corresponding video input jacks.
■ DMC Control
Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control
playback.
Input source
SERVER
Settings
Disable
Does not allow DMCs to control playback.
Enable (default)
Allows DMCs to control playback.
• You can still switch the scene by using cursor keys (e/r) after Step 3.
• A Digital Media Controller (DMC) is a device that can control other network devices through the network.
When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media
Player 12) on the same network.
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
En
77
4
■ Load
Use the cursor keys (q/w) to select an item and press ENTER.
Loads the settings registered for the selected scene.
Select “DETAIL” to configure the SCENE link playback setting or view the scene
assignments.
❑ Device Control
Recalls a selected scene and starts its playback on an external device connected to
the unit via HDMI. (SCENE link playback)
Settings
5
6
Off
Disables the SCENE link playback function.
HDMI Control
Enables SCENE link playback using HDMI Control signals. Select this
if an HDMI Control-compatible device (such as a BD/DVD player) is
connected to the unit via HDMI. It also turns on the TV if it supports
HDMI Control.
Use the cursor keys and ENTER to change the setting.
To exit from the menu, press ON SCREEN.
Default
SCENE1 (BD/DVD), SCENE2 (TV): HDMI Control
SCENE3 (NET), SCENE4 (RADIO): Off
Scene menu items
Item
Function
Save
Registers the current settings in the selected scene.
Page
78
• To control playback of an HDMI Control-compatible device by SCENE link playback, you need to set “HDMI
Control” in the “Setup” menu to “On” and perform the HDMI Control link setup (p.119).
Load
Loads the settings registered for the selected scene. You can
also configure the SCENE link playback setting or view the
scene assignments.
78
❑ Detail
Rename/Icon Select
Changes the scene name and icon.
79
Reset
Restores the default settings for the selected scene.
79
■ Save
Displays the assignments of the selected scene.
Input
Input source to be used
Mode
Sound program/surround decoder to be used
Enhancer
Compressed Music Enhancer on/off
Registers the unit’s current settings (input source, sound program/surround decoder,
and Compressed Music Enhancer on/off in the selected scene.
• If you have changed the input assignment for a scene, you also need to change the external device
assigned to the corresponding SCENE key (p.41).
CONFIGURATIONS ➤ Configuring the SCENE function (Scene menu)
En
78
■ Rename/Icon Select
Changes the scene name and icon displayed on the front display or TV screen.
■ Setup procedure
1
2
3
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
Configuring sound programs/surround
decoders (Sound Program menu)
You can change the settings of the sound programs and surround decoders using the
TV screen.
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select a sound program to be
configured and press the cursor key (q).
Use the cursor keys to select “Sound Program” and press ENTER.
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
• To clear the entry, select “CLEAR”.
4
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
5
• You can still switch the sound program by using cursor keys (e/r) after Step 3.
To exit from the menu, press ON SCREEN.
■ Reset
Restores the default settings (p.41) for the selected scene.
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
79
4
Use the cursor keys (q/w) to select an item and press ENTER.
Sound Program menu items
• Available items vary depending on the selected sound program or surround decoder.
■ Settings for sound programs
Item
Function
Decode Type
bPro Logic*, bPLIIx Movie
(bPLII Movie), bPLIIx
Music* (bPLII Music*),
Selects a surround decoder to be used bPLIIx Game* (bPLII
in combination with the selected sound Game*), Neo:6 Cinema,
Neo:6 Music*
program.
(* Available only when
“SURROUND DECODER” is
selected)
DSP Level
Adjusts the sound field effect level.
-6 dB to +3 dB (default: 0 dB)
Higher to enhance the sound
field effect, and lower to
reduce it.
Initial Delay
Adjusts the delay between the direct
sound and presence sound field
generation.
1 ms to 99 ms
Higher to enhance the delay
effect, and lower to reduce it.
Surround Initial Delay
Adjusts the delay between the direct
sound and surround sound field
generation.
• To return to the previous screen during menu operations, press RETURN.
• To restore the default settings for the selected sound program, select “Reset”.
5
6
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Surround Back Initial
Delay
Adjusts the delay between the direct
sound and surround back sound field
generation.
Room Size
Adjusts the broadening effect of the
presence sound field.
Surround Room Size
Adjusts the broadening effect of the
surround sound field.
Surround Back Room
Size
Adjusts the broadening effect of the
surround back sound field.
Liveness
Adjusts the loss of the presence sound
field.
Surround Liveness
Adjusts the loss of the surround sound
field.
Surround Back
Liveness
Adjusts the loss of the surround back
sound field.
CONFIGURATIONS ➤
Settings
1 ms to 49 ms
Higher to enhance the delay
effect, and lower to reduce it.
0.1 to 2.0
Higher to enhance the
broadening effect, and lower
to reduce it.
0 to 10
Higher to enhance the
reflectivity, and lower to
reduce it.
Configuring sound programs/surround decoders (Sound Program menu)
En
80
■ Settings for decoders
Item
Function
Settings
Reverb Time
Adjust the decay time of the rear
reverberant sound.
1.0 s to 5.0 s
Higher to enrich the
reverberant sound and lower
to have clear sound.
Reverb Delay
Reverb Level
Adjusts the delay between the direct
sound and reverberant sound
generation.
0 ms to 250 ms
Higher to enhance the delay
effect, and lower to reduce it.
Adjusts the volume of the reverberant
sound.
0% to 100%
Higher to strengthen the
reverberant sound, and lower
to weaken it.
The following items are available when you set “Decode Type” of “Surround Decoder”
to “bPLIIx Music” or “Neo:6 Music”.
Decode Type
Function
2ch Stereo
Selects whether to
automatically bypass the
DSP circuit when an
analog audio source is
played back.
Direct
Function
Settings
Panorama
Adjusts the broadening
effect of the front sound
field.
Off (default), On
Select “On” to wrap front right/left
channel sounds around the field
and generate a spacious sound
field in combination with the
surround sound field.
Center Width
Adjusts the broadening
effect of the center
sound field.
0 to 7 (default: 3)
Higher to enhance the broadening
effect, and lower to reduce it
(closer to center).
Dimension
Adjusts the difference in
level between the front
and surround sound
fields.
-3 to +3 (default: 0)
Higher to strengthen the front
sound field and lower to strengthen
the surround sound field.
Center Image
Adjusts the center
orientation level
(broadening effect) of
the front sound field.
0.0 to 1.0 (default: 0.3)
Higher to strengthen the center
orientation level (less broadening
effect) and lower to weaken (more
broadening effect).
bPLIIx Music
The following items are available when you select “2ch Stereo” or “7ch Stereo”.
Sound program Item
Item
Settings
Auto (default), Off
Level
Adjusts the entire volume. -5 to +5 (default: 0)
Front / Rear Balance
Adjusts the front and rear
volume balance.
-5 to +5 (default: 0)
Higher to enhance the front
side, and lower to enhance
the rear side.
Left / Right Balance
Adjusts the right and left
volume balance.
-5 to +5 (default: 0)
Higher to enhance the right
side, and lower to enhance
the left side.
Height Balance
Adjust the height volume
balance using the
presence speakers.
0 to 10 (default: 5)
Higher to enhance the
upside, and lower to
enhance the downside. (The
presence speakers do not
produce sounds when
“Height Balance” is set to
“0”.)
Monaural Mix
Enables/disables
monaural sound output.
Off (default), On
Neo:6 Music
7ch Stereo
• Available items in “7ch Stereo” vary depending on the speaker system being used.
CONFIGURATIONS ➤
Configuring sound programs/surround decoders (Sound Program menu)
En
81
Configuring various functions (Setup menu)
You can configure the unit’s various function with the menu displayed on the TV screen.
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select a menu.
4
Use the cursor keys (q/w) to select an item and press ENTER.
• To return to the previous screen during menu operations, press RETURN.
5
6
Use the cursor keys to select a setting and press ENTER.
To exit from the menu, press ON SCREEN.
Use the cursor keys to select “Setup” and press ENTER.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
82
Setup menu items
Menu
Item
Function
Auto Setup
Power Amp Assign
Page
Automatically optimizes the speaker settings (YPAO).
35
Selects a speaker system.
85
Front
Selects the size of the front speakers.
85
Center
Selects whether or not a center speaker is connected and its size.
85
Surround
Selects whether or not surround speakers are connected and their size.
85
Surround Back
Selects whether or not surround back speakers are connected and their size.
86
Front Presence
Selects whether or not presence speakers are connected.
86
Subwoofer
Selects whether or not a subwoofer is connected and its phase.
86
Extra Bass
Sets the speakers to produce the front channel low-frequency components.
86
Bass Cross Over
Sets the lower limit of the low-frequency component that can be output from speakers whose size is set to “Small”.
86
Configuration
Speaker
Manual Setup
Lipsync
Sound
Distance
Sets the distance between each speaker and listening position.
87
Level
Adjusts the volume of each speaker.
87
Parametric EQ
Adjusts the tone with an equalizer.
87
Test Tone
Enables/disables the test tone output.
88
Delay Enable
Enables/disables the Lipsync adjustment for each input source.
88
Auto/Manual Select
Selects the method to adjust the delay between video and audio output.
88
Adjustment
Adjusts the delay between video and audio output manually.
88
Dynamic Range
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
88
Max Volume
Sets the maximum volume to prevent excessive loudness.
89
Initial Volume
Sets the initial volume for when this receiver is turned on.
89
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level when the volume is adjusted.
89
Video
Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
89
HDMI Control
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
90
HDMI
Audio Output
Selects a device to output audio.
91
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
91
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
83
Menu
Item
Function
Page
IP Address
Configures the network parameters (such as IP address).
92
Network Standby
Selects whether to enable/disable the function that turns on the unit from other network devices.
92
MAC Address Filter
Sets the MAC address filter to limit access to the unit from other network devices.
92
Network Name
Edits the network name (the unit’s name on the network) displayed on other network devices.
93
Network
Main Zone Set
Zone Rename
Changes the zone name (for main zone) displayed on the TV screen.
93
Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness in the second zone.
94
Initial Volume
Sets the Zone2 initial volume for when the unit is turned on.
94
Zone Rename
Changes the zone name (for Zone2) displayed on the TV screen.
94
Multi Zone
Zone2 Set
Dimmer (Front Display)
Adjusts the brightness of the front display.
94
Short Message
Selects whether to display short messages on the TV screen when the unit is operated.
94
Wallpaper
Selects the image to be used as wallpaper on the TV.
95
Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
95
Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
95
Power Mode
Selects how to supply power through the DC OUT jack.
95
Memory Guard
Prevents accidental changes to the settings.
96
Auto Power Standby
Sets the amount of time for the auto-standby function.
96
ECO Mode
Enables/disables the eco mode (power saving mode).
96
Select an on-screen menu language.
97
Display Set
Function
Trigger Output
DC OUT
ECO
Language
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
84
Speaker (Manual Setup)
❑ Front
Selects the size of the front speakers.
Configures the speaker settings manually.
Settings
Large
Select this option for large speakers.
The front speakers will produce all of the front channel frequency
components.
Small (default)
Select this option for small speakers.
The subwoofer will produce front channel low-frequency components
(configurable in “Bass Cross Over”).
• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.
■ Power Amp Assign
❑ Center
Selects a speaker system.
Selects whether or not a center speaker is connected and its size.
In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations
are possible using the presence speakers, Zone2 speakers, or bi-amp connection.
Settings
Settings
Large
Select this option for large speakers.
The center speaker will produce all of the center channel frequency
components.
Basic (default)
Select this option when you use a normal speaker system (not using
Zone2 speakers or a bi-amp connection).
7ch +1ZONE
Select this option when you use Zone2 speakers (p.68) in addition to
the speaker system in the main zone.
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce center channel
low-frequency components (configurable in “Bass Cross Over”).
5ch BI-AMP
Select this option when you connect front speakers that support
bi-amp connections (p.19).
None
Select this option when no center speaker is connected.
The front speakers will produce center channel audio.
■ Configuration
Configures the output characteristics of the speakers.
❑ Surround
Selects whether or not surround speakers are connected and their sizes.
Settings
• When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm
(6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel
frequency components.
Small (default)
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel
low-frequency components (configurable in “Bass Cross Over”).
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual
CINEMA DSP works when you select a sound program.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
85
❑ Surround Back
❑ Subwoofer
Selects whether or not surround back speakers are connected and their sizes.
Selects whether or not a subwoofer is connected and its phase.
Settings
Settings
Normal
(default)
Select this option when a subwoofer is connected (phase not
reversed). The subwoofer will produce LFE (low-frequency effect)
channel audio and low-frequency components from other channels.
Reverse
Select this option when a subwoofer is connected (phase reversed).
The subwoofer will produce LFE (low-frequency effect) channel audio
and low-frequency components from other channels.
Large x1
Select this option when one large speaker is connected.
The surround back speaker will produce all of the surround back
channel frequency components.
Large x2
Select this option when two large speakers are connected.
The surround back speakers will produce all of the surround back
channel frequency components.
Small x1
Select this option when one small speaker is connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Bass Cross Over”).
Small x2 (default)
Select this option when two small speakers are connected.
The subwoofer or front speakers will produce surround back channel
low-frequency components (configurable in “Bass Cross Over”).
• When the bass sound is lacking or unclear, switch the subwoofer phase.
None
Select this option when no surround back speakers are connected.
The surround speakers will produce surround back channel audio.
❑ Extra Bass
Use
None
Select this option when no subwoofer is connected. The front
speakers will produce LFE (low-frequency effect) channel audio and
low-frequency components from other channels.
Sets the speakers to produce the front channel low-frequency components.
Settings
• This setting is not available when “Power Amp Assign” is set to “5ch BI-AMP”, or when “Surround” is set to
“None”.
❑ Front Presence
Off (default)
Depending on the size of the front speakers, either the subwoofer or
front speakers produce the front channel low-frequency components.
On
Both the front speakers and subwoofer produce the front channel
low-frequency components.
Selects whether or not presence speakers are connected.
Settings
Use (default)
Select this option when presence speakers are connected.
None
Select this option when no presence speakers are connected.
• This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.
❑ Bass Cross Over
Sets the lower limit of the low-frequency components that can be output from a speaker
whose size is set to “Small”. A frequency sound lower than the specified value will be
produced from the subwoofer or front speakers
Settings
40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
• If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
86
■ Distance
■ Manual equalizer adjustment
Sets the distance between each speaker and listening position so that sounds from the
speakers reach the listening position at the same time. First, select the unit of distance
from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
1
2
3
Press ENTER again to enter the edit screen.
Use the cursor keys to select a speaker and press ENTER.
• To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
3.00 m (10.0 ft)
Set “Parametric EQ” to “Manual” and press ENTER.
• To copy the parametric equalizer values acquired with “Auto Setup” (p.35) to the “Manual” fields for
fine adjustment, select “PEQ Data Copy” and then an equalizer type.
4
Use the cursor keys (e/r) to select a center frequency from the 7 preset bands
and the cursor keys (q/w) to adjust the gain.
■ Level
Adjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R,
Front Presence L, Front Presence R, Subwoofer
Setting range
-10.0 dB to +10.0 dB (0.5 dB increments)
Default
0.0 dB
Setting range
Gain: -20.0 dB to +6.0 dB
5
■ Parametric EQ
Adjusts the tone with an equalizer.
Settings
Manual
Select this option when you want to adjust the equalizer manually.
For details, see “Manual equalizer adjustment”.
YPAO:Flat
Adjusts individual speakers to achieve the same characteristics.
YPAO:Front
Adjusts individual speakers to achieve the same characteristics as
the front speakers.
YPAO:Natural
Adjusts all speakers to achieve a natural sound.
Through
Does not use the equalizer.
To fine-adjust the center frequency or Q factor (bandwidth), press ENTER
repeatedly to select an item.
Frequency: Use the cursor keys (e/r) to adjust the center frequency of the selected
band and the cursor keys (q/w) to adjust the gain.
Q: Use the cursor keys (e/r) to adjust the Q factor (bandwidth) of the selected band and
the cursor keys (q/w) to adjust the gain.
Setting range
Center frequency: 31.3 HZ to 16.0 kHz
Q factor: 0.500 to 10.080
6
To exit from the menu, press ON SCREEN.
• “YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto
Setup” have already been saved (p.35). Press ENTER again to view the measurement results.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
87
■ Test Tone
❑ Auto/Manual Select
Enables/disables the test tone output. Test tone output helps you to adjust the speaker
balance or equalizer while confirming its effect.
Selects the method to adjust the delay between video and audio output.
Setting range
Settings
Off (default)
Does not output test tones.
On
Outputs test tones automatically when you adjust the speaker balance
or equalizer.
Sound
Auto (default)
Adjusts the delay between video and audio output automatically when
a TV that supports an automatic lipsync function is connected to the
unit via HDMI.
If necessary, you can fine-adjust the audio output timing in
“Adjustment”.
Manual
Select this option when you want to adjust the delay between video
and audio output manually.
Adjust the audio output timing in “Adjustment”.
Configures the audio output settings.
• Even if “Auto/Manual Select” is set to “Auto”, the automatic adjustment does not work depending on the TV
connected to the unit. In this case, adjust the delay manually in “Adjustment”.
❑ Adjustment
Adjusts the delay between video and audio output manually when “Auto/Manual
Select” is set to “Manual”. You can fine-adjust the audio output timing when
“Auto/Manual Select” is set to “Auto”.
Setting range
0 ms to 500 ms (1 ms increments)
Default
0 ms
■ Lipsync
Adjusts the delay between video and audio output.
❑ Delay Enable
• “Offset” shows the difference between automatic adjustment and fine adjustment.
Enables/disables the Lipsync adjustment for each input source.
■ Dynamic Range
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and
DTS signals) playback.
Settings
Settings
Disable
Disable the Lipsync adjustment for the selected input source.
Enable (default)
Enables the Lipsync adjustment for the selected input source.
Maximum (default)
Produces audio without adjusting the dynamic range.
Standard
Optimizes the dynamic range for regular home use.
Minimum/Auto
Sets the dynamic range for clear sound even at night or at low
volumes.
When playing back Dolby TrueHD signals, the dynamic range is
automatically adjusted based on the input signal information.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
88
■ Max Volume
Video
Sets the maximum volume to prevent excessive loudness.
Configures the video output settings.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
■ Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
Off (default)
Sets the level to the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max
Volume”.)
■ Adaptive DSP Level
■ Video Mode
Enables/disables the video signal processing (resolution and aspect ratio).
Settings
Direct (default)
Disables the video signal processing.
Processing
Enables the video signal processing.
Select a resolution and an aspect ratio in “Resolution” and “Aspect”.
Selects whether to automatically adjust the CINEMA DSP effect level when the volume
is adjusted.
Settings
Off
Does not adjust the effect level automatically.
On (default)
Adjusts the effect level automatically.
• When “Video Mode” is set to “Direct”, the unit transmits video signals with the least circuitry in order to
reduce video output delay.
• When “Video Mode” is set to “Processing” and the resolution is being converted, short messages are not
displayed on the TV screen.
❑ Resolution
Selects a resolution to output HDMI video signals when “Video Mode” is set to
“Processing”.
Settings
Through
Does not convert the resolution.
Auto (default)
Selects a resolution automatically in accordance with TV resolution.
480p/576p, 720p,
1080i, 1080p, 4K
Output video signals with a selected resolution.
(Only the resolutions supported by your TV are selectable.)
• If you need to select a resolution that is not supported by your TV, set “MON.CHK” (p.100) in the
“ADVANCED SETUP” menu to “SKIP” and try again. (Note that the output video may not be displayed on
your TV normally.)
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
89
❑ Aspect
HDMI
Selects an aspect ratio to output HDMI video signals when “Video Mode” is set to
“Processing”.
Configures the HDMI settings.
Settings
Through (default)
Does not convert the aspect ratio.
16:9 Normal
Outputs 4:3 video signals to a 16:9 TV with black bands on either side
of the screen.
• This setting functions only when 480i/576i or 480p/576p signals are converted into 720p, 1080i, 1080p, or
2160p (4K) signals.
■ HDMI Control
Enables/disables HDMI Control (p.119).
Settings
Off (default)
Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and “Standby
Sync”.
• To use HDMI control, you need to perform the HDMI Control link setup (p.119) after connecting HDMI
Control-compatible devices.
❑ TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI
Control” is set to “On”. The unit’s input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
Settings
AV 1–6, AUDIO 1–2
Default
AV 4
• When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting
an external device because the input will be used for TV audio input.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
90
❑ ARC
❑ HDMI OUT
Enables/disables ARC (p.21) when “HDMI Control” is set to “On”.
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Settings
Off
Disables ARC.
Off (default)
Disables the audio output from the TV.
On (default)
Enables ARC.
On
Enables the audio output from the TV.
• You do not need to change this setting normally. In case noises are produced from the speakers connected
to the unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to
“Off” and use the TV’s speakers.
❑ Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit
when “HDMI Control” is set to “On”.
■ Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to “On”, you can use the input selection
keys (HDMI 1–5, V-AUX) to select an HDMI input even when the unit is in standby mode
(the standby indicator on the unit blinks).
Settings
Off (default)
Does not output videos/audio to the TV.
On
Outputs videos/audio to the TV.
(The unit consumes more power than when “Off” is selected.)
Settings
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Auto (default)
Sets the unit to standby mode when the TV is turned off only when the
unit is receiving TV audio or HDMI signals.
• This setting is available only when “HDMI Control” is set to “Off”.
■ Audio Output
Selects a device to output audio.
• This setting is available only when “HDMI Control” is set to “Off”.
❑ Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
Off
Disables the audio output from the speakers.
On (default)
Enables the audio output from the speakers.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
91
Network
Configures the network settings.
6
7
To save the changes, use the cursor keys to select “OK” and press ENTER.
To exit from the menu, press ON SCREEN.
■ Network Standby
Selects whether the unit can be turned on from other network devices (network
standby).
Settings
Off (default)
Disables the network standby function.
On
Enables the network standby function.
(The unit consumes more power than when “Off” is selected.)
■ IP Address
■ MAC Address Filter
Configures the network parameters (such as IP address).
Sets the MAC address filter to limit access to the unit from other network devices.
❑ DHCP
❑ Filter
Select whether to use a DHCP server.
Enables/disables the MAC address filter.
Settings
Settings
Off
Does not use a DHCP server. Configure the network parameters
manually. For details, see “Manual network settings”.
Off (default)
Disables the MAC address filter.
On (default)
Uses a DHCP server to automatically obtain the unit’s network
parameters (such as IP address).
On
Enables the MAC address filter. In “MAC Address 1–10”, specify the
MAC addresses of the network devices that will be permitted access
to the unit.
■ Manual network settings
1
2
Set “DHCP” to “Off”.
Use the cursor keys (q/w) to select a parameter type and press ENTER.
IP Address
Specifies an IP address.
Subnet Mask
Specifies a subnet mask.
Default Gateway
Specifies the IP address of the default gateway.
DNS Server (P)
Specifies the IP address of the primary DNS server.
DNS Server (S)
Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
4
5
To confirm the setting, press ENTER.
To configure another network parameter, repeat steps 2 to 4.
❑ MAC Address 1–10
Specifies the MAC addresses (up to 10) of the network devices that will be permitted
access to the unit when “Filter” is set to “On”.
■ Procedure
1
Use the cursor keys (q/w) to select “MAC Address 1–5” or “MAC Address 6–10”
and press ENTER.
2
3
Use the cursor keys (q/w) to select an MAC address number and press ENTER.
4
5
6
To confirm the setting, press ENTER.
Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to
select a value.
To save the changes, use the cursor keys to select “OK” and press ENTER.
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
92
■ Network Name
Multi Zone
Edits the network name (the unit’s name on the network) displayed on other network
devices.
Configures the multi zone settings.
■ Procedure
1
2
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the
entry.
■ Main Zone Set
Configures the main zone setting.
❑ Zone Rename
Changes the zone name (for main zone) displayed on the TV screen.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
■ Procedure
1
2
Press ENTER to enter the name edit screen.
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
• To clear the entry, select “CLEAR”.
3
Use the cursor keys to select “OK” and press ENTER.
• To restore the default setting, select “RESET”.
4
To exit from the menu, press ON SCREEN.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
93
■ Zone2 Set
Function
Configures the Zone2 settings.
Configures the functions that make the unit easier to use.
❑ Max Volume
Sets the Zone2 maximum volume to prevent excessive loudness.
Setting range
-30.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB
Default
+16.5 dB
• This setting is available only when “Power Amp Assign” (p.85) is set to “7ch +1ZONE”.
❑ Initial Volume
■ Display Set
Sets the Zone2 initial volume for when the unit is turned on.
Configures the settings related to the front display and TV screen display.
Settings
❑ Dimmer (Front Display)
Off (default)
Sets the level at the volume level of the unit when it last entered
standby mode.
On
Sets at Mute or the specified volume level (-80 dB to +16.5 dB, 0.5 dB
increments).
(This setting works only when the initial volume is set lower than “Max
Volume”.)
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
Default
0
• This setting is available only when “Power Amp Assign” (p.85) is set to “7ch +1ZONE”.
• The front display may become dark when “ECO Mode” (p.96) is set to “On”.
❑ Zone Rename
❑ Short Message
Changes the zone name (for Zone2) displayed on the TV screen.
Selects whether to display short messages on the TV screen when the unit is operated
(such as input selection and volume adjustment).
You can change the zone name in the same manner as “Zone Rename” in “Main Zone
Set” (p.93).
Settings
On (default)
Displays short messages on the TV screen.
Off
Does not display short messages on the TV screen.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
94
❑ Wallpaper
Manual
Selects the image to be used as wallpaper on the TV.
Switches the output level for electronic signal transmission manually when “Trigger
Mode” is set to “Manual”. This setting can also be used to confirm proper function of
the external device connected via the TRIGGER OUT jack.
Settings
Picture 1 (default),
Picture 2, Picture 3
Displays the selected image on the TV screen when there is no video
signal.
Gray
Displays a gray background on the TV screen when there is no video
signal.
■ Trigger Output
Sets the TRIGGER OUT jack to function in sync with the power status of each zone or
input switching.
❑ Trigger Mode
Specifies the condition for the TRIGGER OUT jack to function.
Choices
Low
Stops the electronic signal transmission.
High (default)
Transmits the electronic signal.
❑ Target Zone
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Settings
Main
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of the main zone.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in the main zone.
Zone2
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in Zone2.
All (default)
When “Trigger Mode” is set to “Power,” electronic signal transmission
is synchronized with the power status of the main zone or Zone2.
When “Trigger Mode” is set to “Source,” electronic signal transmission
is synchronized with the input switching in the main zone or Zone2.
Settings
Power (default)
The TRIGGER OUT jack functions in sync with the power status of the
zone specified with “Target Zone.”
Source
The TRIGGER OUT jack functions in sync with the input switching in
the zone specified with “Target Zone.”
An electronic signal is transmitted according to the setting made in
“Source.”
Manual
Select this to manually switch the output level for electronic signal
transmission with “Manual.”
■ DC OUT
Source
Specifies the output level of the electronic signal transmitted with each input, switching
when “Trigger Mode” is set to “Source”.
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2, TUNER, (network sources), USB
Settings
Configures the DC OUT jack setting.
❑ Power Mode
Selects how to supply power to the Yamaha AV accessory connected to the DC OUT
jack.
Settings
Low
Stops the electronic signal transmission when you switch to the input
source specified in this option.
High (default)
Transmits the electronic signal when you switch to the input source
specified in this option.
Continuous (default)
Supplies power through the DC OUT jack continuously regardless of
the power state (on/standby) of the unit.
Main Zone Power
Sync.
Supplies power through the DC OUT jack only when the main zone is
turned on.
(This setting may not work properly on some accessories.)
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
95
■ Memory Guard
ECO
Prevents accidental changes to the settings.
Configures the power supply settings.
Settings
Off (default)
Does not protect the settings.
On
Protects the settings until “Off” is selected.
• When “Memory Guard” is set to “On”, the lock icon (o) is displayed on the menu screen.
Icon
■ Auto Power Standby
Sets the amount of time for the auto-standby function. If you do not operate the unit for
the specified time, the unit will automatically go into standby mode.
Settings
Off
Does not set the unit to standby mode automatically.
2 hours, 4 hours,
8 hours, 12 hours
Sets the unit to standby mode when you have not operated the unit for
the specified time. For example, when “2 hours” is selected, the unit
will switch to standby mode if you do not operate it for 2 hours.
Default
U.K. and Europe models: 8 hours
Other models: Off
• Just before the unit enters standby mode, “AutoPowerStdby” appears and then countdown starts in the
front display.
■ ECO Mode
Enables/disables the eco (power saving) mode.
When the eco mode is enabled, you can reduce the unit’s power consumption.
Settings
Off (default)
Disables the eco mode.
On
Enables the eco mode.
• The new setting will take effect after the unit is restarted.
• When “ECO Mode” is set to “On”, the front panel display may become dark.
• If you want to play audio at high volume, set “ECO Mode” to “Off”.
CONFIGURATIONS
➤ Configuring various functions (Setup menu)
En
96
Language
Select an on-screen menu language.
Viewing information about the unit
(Information menu)
You can view information about the unit using the TV screen.
1
2
Press ON SCREEN.
3
Use the cursor keys (e/r) to select an information type.
4
To exit from the menu, press ON SCREEN.
Use the cursor keys to select “Information” and press ENTER.
Settings
English (default)
English
日本語
Japanese
Français
French
Deutsch
German
Español
Spanish
Russian
Italiano
Italian
Chinese
• The information on the front display is provided in English only.
CONFIGURATIONS
➤ Viewing information about the unit (Information menu)
En
97
■ Network
Types of information
Displays the network information on the unit.
■ Audio Signal
IP Address
IP address
Displays information about the current audio signal.
Subnet Mask
Subnet mask
Default Gateway
The IP address of the default gateway
DNS Server (P)
The IP address of the primary DNS server
Format
Audio format of the input signal
Channel
The number of source channels in the input signal
(front/surround/LFE)
For example, “5.1 (3/2/0.1)” means 5.1ch in total
(3 front channels, 2 surround channels, and LFE).
Input
Sampling
The number of samples per second of the input digital signal
Bitrate
The amount of data per second of the input bitstream signal
Dialogue
Output
The dialogue normalization level of the input bitstream signal
The speaker terminals from which signals are output
DNS Server (S)
The IP address of the secondary DNS server
MAC Address
MAC address
Network Name
Network name (the unit’s name on the network)
Status
The connection status of the NETWORK jack
■ System
Displays the system information on the unit.
• Even when the unit is set to output bitstream signals directly, the signal may be converted depending on the
specifications and settings of the playback device.
Remote ID
The unit’s remote control ID setting (p.99)
TV Format
The unit’s video signal type (p.100)
Speaker Impedance
The speaker impedance setting of the unit (p.99)
■ Video Signal
System ID
System ID number
Displays information about the current video signal.
Firmware Version
The version of firmware installed on the unit
HDMI Signal
Presence or absence of HDMI signal input/output
HDMI Resolution
Resolutions of input signal (analog or HDMI) and output signal (HDMI)
Analog Resolution
Resolutions of input signal (analog) and signal output at the MONITOR OUT
jacks (analog)
• If the unit detects a newer firmware over the network, “!” (exclamation mark) appears at the upper right of
the “Information” and “System” icons, and the corresponding message will be displayed in this screen. You
can update the unit’s firmware by pressing ENTER in this screen and following the procedure in “Updating
the unit’s firmware via the network” (p.105).
■ HDMI Monitor
■ Multi Zone
Displays information about the TV connected to the HDMI OUT jacks.
Displays information about Zone2.
Interface
TV interface
Input
The input source selected for Zone2
Video Resolution
Resolutions supported by the TV
Volume
The volume setting for Zone2
CONFIGURATIONS
➤ Viewing information about the unit (Information menu)
En
98
Changing the speaker impedance setting (SP IMP.)
Configuring the system settings
(ADVANCED SETUP menu)
SPIMP.8MIN
Configure the system settings of the unit while viewing the front display.
1
2
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
Set the unit to standby mode.
Settings
While holding down STRAIGHT on the front panel, press MAIN ZONE z.
MAIN ZONE z
PROGRAM
3
4
5
6  MIN
Select this option when you connect 6-ohm speakers to the unit. You
can also use 4-ohm speakers as the front speakers.
8  MIN (default)
Select this option when you connect 8-ohm or higher speakers to the
unit.
Selecting the remote control ID (REMOTE ID)
STRAIGHT
Press PROGRAM to select an item.
REMOTEIDID1
Press STRAIGHT to select a setting.
Press MAIN ZONE z to set the unit to standby mode and turn it on
again.
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1 (default), ID2
The new settings take effect.
■ Changing the remote control ID of the remote control
ADVANCED SETUP menu items
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
Item
Function
SP IMP.
Changes the speaker impedance setting.
Page
REMOTE ID
Selects the unit’s remote control ID.
99
TV FORMAT
Switches the video signal type.
100
MON.CHK
Removes the limitation on HDMI video output.
100
INIT
Restores the default settings.
100
UPDATE
Updates the firmware.
100
VERSION
Checks the version of firmware currently installed on the unit.
101
99
1
2
3
Press CODE SET on the remote control.
Press RECEIVER.
Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).
Once the remote control ID is registered successfully, SOURCE blinks twice.
If it blinks six times, registration failed. Repeat from Step 1.
• The registered remote control codes (p.102) are not cleared even if you change the remote control ID.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
99
Switching the video signal type (TV FORMAT)
Restoring the default settings (INIT)
TVFORMATNTSC
Switch the video signal type of the unit so that it matches to the format of your TV.
INITCANCEL
Restores the default settings for the unit.
Settings
NTSC, PAL
Choices
Default
U.S.A. model: NTSC
Other models: PAL
Removing the limitation on HDMI video output
(MON.CHK)
VIDEO
Restores the default settings for video configurations.
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
Updating the firmware (UPDATE)
UPDATEUSB
MON.CHKYES
The unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jack.
Disable the monitor check function if you want to specify a resolution in “Resolution”
(p.89) when the unit cannot detect the TV’s resolution or when you want to specify a
different resolution than the detected resolution.
Settings
YES (default)
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from the Yamaha website. If the unit
is connected to the Internet, you can download the firmware via the network. For
details, refer to the information supplied with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to
start firmware update.
Choices
USB
Update the firmware using a USB memory device.
NETWORK
Update the firmware via the network.
• Reset to “YES” if the unit becomes inoperable because video from the unit cannot be displayed on the TV
after “MON.CHK” has been set to “SKIP”.
• If the unit detects newer firmware over the network, the corresponding message will be displayed after
ON SCREEN is pressed. In this case, you can also update the unit’s firmware by following the procedure in
“Updating the unit’s firmware via the network” (p.105).
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
100
Checking the firmware version (VERSION)
VERSIONxx.xx
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in “System” (p.98) in the “Information” menu.
• It may take a while until the firmware version is displayed.
CONFIGURATIONS ➤
Configuring the system settings (ADVANCED SETUP menu)
En
101
SOURCE
RECEIVER
SOURCE
Controlling external devices with the remote control
HDMI
1
2
3
4
5
You can use the unit’s remote control to operate external devices
(such as BD/DVD players) if you have registered the remote control
code of the external device.
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
3
4
Press TV z.
Use the numeric keys to enter the 4-digit remote
control code.
• You cannot control an external device that does not have a remote control sensor.
ZONE 2
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
RADIO
VOLUME
• Ensure that the remote control ID of the external device is set to “ID1”. If any other
ID is selected, the remote control operations may not work properly.
Once the remote control code is successfully registered, SOURCE
blinks twice.
• If the unit’s remote control is without batteries for more than 2 minutes, the
registered codes may be cleared. If this happens, insert new batteries and register
the codes again.
If it blinks six times, registration has failed. Repeat from Step 2.
■ TV operations
TOP MENU
POP-UP/MENU
ON
SCREEN
• Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all
the input selection keys. With this setting, you can control HDMI
Control-compatible devices connected to the unit with the remote control. (This
function may not work depending on the specification of the external device.)
OPTION
ENTER
RETURN
DISPLAY
Registering the remote control code for a TV
BAND
MODE
TUNING
PRESET
You can use the unit’s remote control to operate a TV if you have
registered its remote control code.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
ENHANCER PURE DIRECT
1
2
3
5
6
7
9
0
10
8
Switches the video inputs of the TV.
MUTE
Mutes the audio output of the TV.
TV VOL
Adjust the volume of the TV.
TV CH
Switch the channels of the TV
TV z
Turns on/off the TV.
Numeric keys
ENT
TV
INPUT
TV VOL
TV operation keys
INPUT
4
MEMORY
MUTE
Once you have registered the remote control code for your TV, you
can control it using the TV operation keys, regardless of the input
source selected on the unit.
TV CH
CODE SET
TV operation keys
TV z
CODE SET
• You can also register your TV’s remote control code to the unit’s input selection
keys (p.103). This would allow you to use the cursor keys or numeric keys to
operate the TV (this function may not be available on some TV models).
1
Use “Remote Control Code Search” in the CD-ROM
to find your TV’s remote control code.
• If there are multiple remote control codes, register the first code in the list.
If that does not work, try the other codes.
2
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
102
RECEIVER
SOURCE
HDMI
1
2
3
4
5
SOURCE z
SOURCE
RECEIVER
V-AUX
AV
1
2
3
4
Input selection keys
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
ZONE 2
Registering the remote control codes for
playback devices
You can use the unit’s remote control to operate playback devices if
you have registered their remote control codes. You can also use
the input selection keys to change the playback devices that are
controlled by the remote control, because their remote control
codes are assigned to the input selection keys.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
• If you assign the remote control code for an external device to the star (★) key, you
can operate the device with the remote control without switching the input source
after pressing the star key.
VOLUME
POP-UP/MENU
ON
SCREEN
OPTION
External device
operation keys
1
Use “Remote Control Code Search” in the CD-ROM
to find the remote control code for your playback
device.
■ Playback device operations
Once you have registered the remote control code for your
playback device, you can control it using the following keys after
selecting the input source or scene.
• By pressing SOURCE or RECEIVER, you can switch the devices (the unit or
external device) that are operated by the menu operation keys, DISPLAY and
numeric keys. You can operate the unit after pressing RECEIVER (lights up in
orange), and an external device after pressing SOURCE (lights up in green). For
example, if you register the remote control code of your external device on
TUNER, you can operate the unit’s built-in FM/AM radio after pressing RECEIVER
and the external device after pressing SOURCE.
SOURCE z
Turns on/off the playback device.
Cursor keys
Menu operation
keys
ENTER
Confirms a selected item.
RETURN
Returns to the previous screen.
TOP MENU
Displays the top menu.
Menu operation keys
ENTER
DISPLAY
RETURN
DISPLAY
DISPLAY
• If there are multiple remote control codes, register the first code in the list. If
that does not work, try the other codes.
BAND
MODE
TUNING
External device
operation keys
PRESET
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
4
5
6
7
8
9
0
ENHANCER PURE DIRECT
2
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 2.
Numeric keys
MEMORY
10
ENT
TV operation keys
INPUT
MUTE
Press CODE SET.
SOURCE blinks twice.
TV
TV VOL
Select an item.
External device
operation keys
CODE SET
3
4
POP-UP/MENU
Displays the pop-up menu.
s
Stops playback.
d
Stops playback temporarily.
a
Starts playback of the selected
song/video.
h
j
TV CH
CODE SET
Switches information on the display.
Press the input selection key.
f
For example, press HDMI 1 to set the remote control code
for the playback device connected to the HDMI 1 jack.
g
Use the numeric keys to enter the 4-digit remote
control code.
Once the remote control code is registered successfully, SOURCE
blinks twice.
Searches forward/backward (by
holding down).
Skips forward/backward.
Numeric keys
Enter numerical values.
TV operation keys
Control the TV (p.102).
• These keys work only if the corresponding function is available on your playback
device and if the device can be operated with an infrared remote control.
If it blinks six times, registration has failed. Repeat from Step 2.
• For details on how to register a remote control code to a SCENE key, refer to
“Configuring scene assignments” (p.41).
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
103
SOURCE
RECEIVER
SOURCE
Resetting remote control codes
RECEIVER
HDMI
1
2
3
You can reset a remote control code registered to each input
selection key.
4
5
V-AUX
AV
1
2
3
5
6
1
4
USB
NET
Input selection keys
AUDIO
TUNER
MAIN
2
1
SOURCE blinks twice.
ZONE 2
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
2
3
VOLUME
POP-UP/MENU
ON
SCREEN
Press CODE SET.
Press the input selection key.
Use the numeric keys to enter “5098”.
OPTION
Once the remote control code is reset successfully, SOURCE blinks
twice.
ENTER
RETURN
If it blinks six times, resetting has failed. Repeat from Step 1.
DISPLAY
BAND
To reset the remote control to factory default settings
MODE
TUNING
PRESET
a Press CODE SET.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
b Press RECEIVER.
ENHANCER PURE DIRECT
INFO
SLEEP
1
2
5
6
9
0
c Use the numeric keys to enter “9981”.
3
7
4
8
Numeric keys
MEMORY
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
CODE SET
CONFIGURATIONS
➤ Controlling external devices with the remote control
En
104
Updating the unit’s firmware via the network
RECEIVER
SOURCE
HDMI
1
2
3
4
5
New firmware that provides additional features or product
improvements will be released as needed. If the unit is connected
to the Internet, you can download the firmware via the network and
update it.
V-AUX
AV
1
2
3
4
AUDIO
5
6
1
TUNER
USB
NET
MAIN
2
• Do not operate the unit or disconnect the power cable or network cable during
firmware update. Firmware update takes about 20 minutes or more
(depending on your Internet connection speed).
SCENE
BD
DVD
TV
NET
PROGRAM
MUTE
TOP MENU
RADIO
• If the unit is connected to the wireless network via a wireless network adapter,
network update may not be possible depending on the condition of the
wireless connection. In this case, update the firmware using the USB memory
device (p.100).
VOLUME
If “Update Success Please Power Off!” appears on
the front display, press MAIN ZONE z on the front
panel.
The firmware update is complete.
Note
ZONE 2
3
• If you want to update the firmware later, select “CLOSE” in Step 2. “!” (exclamation
mark) appears at the upper right of the “Information” and “System” icons, and a
message will be displayed in the “System” screen (p.98). You can update the unit’s
firmware by pressing ENTER in the “System” screen.
POP-UP/MENU
ON
SCREEN
OPTION
Cursor keys
ENTER
ENTER
RETURN
DISPLAY
BAND
MODE
TUNING
PRESET
• You can also update the firmware using the USB memory device from the
“ADVANCED SETUP” menu (p.100).
Information
icon
A firmware update is available if the following message is displayed
after ON SCREEN is pressed.
SUR. DECODE STRAIGHT
MOVIE
MUSIC
INFO
SLEEP
1
2
3
5
6
7
9
0
ENHANCER PURE DIRECT
4
8
MEMORY
10
ENT
TV
INPUT
TV VOL
MUTE
TV CH
CODE SET
Message
System Icon
1
2
Read the on-screen description.
To start the firmware update, use the cursor keys to
select “START” and press ENTER.
The on-screen display turns off.
CONFIGURATIONS ➤
Updating the unit’s firmware via the network
En
105
APPENDIX
Frequently asked questions
The new speaker system does not provide an ideal sound
balance...
If you have changed speakers or have a new speaker system, use “Auto Setup” to
optimize the speaker settings again (p.35). If you want to adjust the speaker settings
manually, use “Manual Setup” in the “Setup” menu (p.85).
Since we have small children, we want to set limitations on the
volume control...
If a small child accidentally operates the controls on the main unit or remote control, the
volume may suddenly increase. This may also cause injury or damage the unit or
speakers. We recommend using “Max Volume” in the “Setup” menu to set the maximum
volume level for the unit in advance (p.89). You can also set the maximum volume for
Zone2 (p.94).
I am occasionally startled by a sudden loud sound when turning
on the unit...
By default, the volume level when the unit last entered standby mode is automatically
applied. If you want to fix the volume, use “Initial Volume” in the “Setup” menu to set the
volume to be applied when the receiver is turned on (p.89). You can also set the initial
volume for Zone2 (p.94).
We are bothered by volume differences when switching
between input sources…
enable HDMI Control on each device and perform the HDMI Control link setup. This
setup is required every time you add a new HDMI Control-compatible device to your
system. For information on how HDMI Control works between your TV and playback
devices, refer to the instruction manuals for each device.
I want to turn off the on-screen messages displayed during
operations...
By default, short messages are displayed on the TV screen when the unit is operated
(such as input selection and volume adjustment). If the short messages bother you
when you are watching movies or sports, configure “Short Message” (p.94) in the
“Setup” menu to turn off the short messages.
I want to prevent accidental changes to the settings...
You can protect the settings configured on the unit (such as speaker settings) by
utilizing “Memory Guard” in the “Setup” menu (p.96).
The unit’s remote control is simultaneously controlling another
Yamaha product as well as the unit...
When using multiple Yamaha products, the remote control may work on another
Yamaha product or another remote control may work on the unit. If this happens,
register different remote control IDs for the devices that you want to control with each
remote control (p.99).
You can correct volume differences between input sources by utilizing “Input Trim” in
the “Option” menu (p.74).
I want to enjoy videos/audio played back on the video device
even when the unit is in standby mode…
I made HDMI connections but HDMI Control does not work at
all...
If you have connected a video device to the unit with HDMI, you can output
videos/audio played back on the video device to the TV even when the unit is in
standby mode. To use this function, set “Standby Through” (p.91) in the “Setup” menu
to “On”. You can also switch the input source using the remote control of the unit when
this function is enabled.
To use HDMI Control, you need to perform the HDMI Control link setup (p.119). After
connecting HDMI Control-compatible devices (such as BD/DVD players) to the unit,
APPENDIX
➤ Frequently asked questions
En
106
Troubleshooting
Refer to the table below when the unit does not function properly.
If the problem you are experiencing is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
First, check the following:
a The power cables of the unit, TV and playback devices (such as BD/DVD players) are connected to AC wall outlets
securely.
b The unit, subwoofer, TV and playback devices (such as BD/DVD players) are turned on.
c The connectors of each cable are securely inserted in to jacks on each device.
Power, system and remote control
Problem
Cause
Remedy
The power does not turn on.
The protection circuitry has been activated three times
consecutively. When the unit is in this condition, the standby
indicator on the unit blinks if you try to turn on the power.
As a safety precaution, capability to turn on the power is disabled. Contact your
nearest Yamaha dealer or service center to request repair.
The power does not turn off.
The internal microcomputer has frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down MAIN ZONE z on the front panel for more than 10 seconds to
initialize and reboot the unit. (If the problem persists, disconnect the power cable
from the AC wall outlet and plug it again.)
The power turns off (standby mode) immediately.
The unit was turned on while a speaker cable was shorted.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.18).
The sleep timer worked.
Turn on the unit and start playback again.
The auto-standby function kicked in because the unit was not used
for the specified time.
To disable the auto-standby function, set “Auto Power Standby” in the “Setup”
menu to “Off” (p.96).
The speaker impedance setting is incorrect.
Set the speaker impedance to match your speakers (p.99).
The protection circuitry has been activated because of a short
circuit.
Twist the bare wires of each speaker cable firmly and reconnect to the unit and
speakers (p.18).
The internal microcomputer is frozen, due to an external electric
shock (such as lightning or excessive static electricity) or to a drop
in the power supply voltage.
Hold down MAIN ZONE z on the front panel for more than 10 seconds to
initialize and reboot the unit. (If the problem persists, disconnect the power cable
from the AC wall outlet and plug it again.)
The unit enters standby mode automatically.
The unit is not reacting.
APPENDIX ➤ Troubleshooting
En
107
Problem
The unit cannot be controlled using the remote
control.
Cause
The unit is out of the operating range.
Use the remote control within the operating range (p.5).
The batteries are weak.
Replace with new batteries.
The unit’s remote control sensor is exposed to direct sunlight or
strong lighting.
Adjust the lighting angle, or reposition the unit.
The remote control is set to control external devices.
Press RECEIVER to set the remote control to control the unit (the key lights up in
orange).
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.99).
The remote control is set to control the unit.
Press SOURCE to set the remote control to control external devices (the key lights
up in green).
The corresponding remote control code is not set properly.
Set the remote control code again (p.102). Even if the remote control code is
registered properly, some products may not respond to the remote control.
A remote control code for another playback device is assigned to
V-AUX.
Reset the remote control code registered to V-AUX (p.104).
The mobile device or its application is not externally controllable.
Directly operate the mobile device itself.
External devices cannot be controlled using the
remote control.
The MHL-compatible mobile device cannot be
controlled using the remote control.
Remedy
APPENDIX ➤ Troubleshooting
En
108
Audio
Problem
No sound.
Cause
Remedy
Another input source is selected.
Select an appropriate input source with the input selection keys.
Signals that the unit cannot reproduce are being input.
Some digital audio formats cannot be played back on the unit. To check the audio
format of the input signal, use “Audio Signal” in the “Information” menu (p.98).
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
The maximum volume is set.
Use “Max Volume” in the “Setup” menu to adjust the maximum volume (p.89).
A device connected to the output jacks of the unit is not turned on.
Turn on all devices connected to the output jacks of the unit.
The playback source does not contain a signal for the channel.
To check it, use “Audio Signal” in the “Information” menu (p.98).
The currently selected sound program/decoder does not use the
speaker.
To check it, use “Test Tone” in the “Setup” menu (p.88).
Audio output of the speaker is disabled.
Perform “Auto Setup” (p.35) or use “Configuration” in the “Setup” menu to change
the speaker settings (p.85).
The volume of the speaker is set too low.
Perform “Auto Setup” (p.35) or use “Level” in the “Setup” menu to adjust the
speaker volume (p.87).
The speaker cable connecting the unit and the speaker is
defective.
If there is no problem with the connection, replace with another speaker cable.
The speaker is malfunctioning.
To check it, replace with another speaker. If the problem persists, the unit may be
malfunctioning.
The extended surround is disabled.
Use “Extended Surround” in the “Option” menu to select a decoder to be used
(p.74).
The playback source does not contain LFE or low-frequency
signals.
To check it, set “Extra Bass” in the “Setup” menu to “On”, in order to output the
front channel low-frequency components from the subwoofer (p.86).
Subwoofer output is disabled.
Perform “Auto Setup” (p.35) or set “Subwoofer” in the “Setup” menu to “Use”
(p.86).
The volume of the subwoofer is too low.
Adjust the volume on the subwoofer.
The subwoofer has been turned off by its auto-standby function.
Disable the auto-standby function of the subwoofer or adjust its sensitivity level.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The unit is set not to output audio input through HDMI jacks from
the SPEAKERS terminals.
In “Audio Output” in the “Setup” menu, set “Amp” to “On” (p.91).
The number of devices connected to the HDMI OUT jack exceeds
the limit.
Disconnect some of the HDMI devices.
The volume cannot be increased.
No sound is coming from a specific speaker.
No sound is coming from the surround back
speaker.
No sound is coming from the subwoofer.
No sound from the playback device (connected to
the unit with HDMI).
APPENDIX ➤ Troubleshooting
En
109
Problem
No sound from the TV (when HDMI Control is
used).
Only the front speakers work on multichannel
audio.
Cause
Remedy
The TV is set to output audio from the TV speakers.
Change the audio output setting on your TV so that the TV audio is output from the
speakers connected to the unit.
A TV that does not support ARC is connected to the unit only with
an HDMI cable.
Use a digital optical cable to make an audio connection (p.23).
(If the TV is connected to the unit with an audio cable)
The TV audio input setting does not match the actual connection.
Use “TV Audio Input” in the “Setup” menu to select the correct audio input jack
(p.90).
(If you are trying to use ARC)
ARC is disabled on the unit or TV.
Set “ARC” in the “Setup” menu to “On” (p.91). Also, enable ARC on the TV.
The playback device is set to output 2-channel audio (such as
PCM) only.
To check it, use “Audio Signal” in the “Information” menu (p.98). If necessary,
change the digital audio output setting on the playback device.
The unit is too close to another digital or radio frequency device.
Move the unit further away from the device.
The cable connecting the unit and playback device is defective.
If there is no problem with the connection, replace with another cable.
Noise/hum is heard.
The volume of the unit is too high.
Turn down the volume. If “ECO Mode” is set to “On”, set it to “Off” (p.96).
A device connected to the unit’s output jacks is not turned on.
Turn on all devices connected to the unit’s output jacks.
Cause
Remedy
The sound is distorted.
Video
Problem
No video.
No video from the playback device (connected to
the unit with HDMI).
Another input source is selected on the unit.
Select an appropriate input source with the input selection keys.
Another input source is selected on the TV.
Switch the TV input to display the video from the unit.
The video signal output from the unit is not supported by the TV.
Set “MON.CHK” in the “ADVANCED SETUP” menu to “YES” (p.100).
The cable connecting the unit and TV (or playback device) is
defective.
If there is no problem with the connection, replace with another cable.
The input video signal (resolution) is not supported by the unit.
To check the information about the current video signal (resolution), use “Video
Signal” in the “Information” menu (p.98). For information about video signals
supported by the unit, see “HDMI signal compatibility” (p.120).
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
Refer to the instruction manuals for the TV and check the TV’s specifications.
The number of devices connected to the HDMI OUT jack is over
the limit.
Disconnect some of the HDMI devices.
The TV is not connected to the unit via HDMI.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.21 to 24).
Another input source is selected on the TV.
Switch the TV input to display the video from the unit (HDMI OUT jack).
The menu of the unit is not displayed on the TV.
APPENDIX ➤ Troubleshooting
En
110
FM/AM radio
Problem
Cause
There is multi-path interference.
Remedy
Adjust the FM antenna height or orientation, or place it in a different location.
Set “FM Mode” in the “Option” menu to “Mono” to select monaural FM radio
reception (p.74).
FM radio reception is weak or noisy.
Your area is too far from the FM station transmitter.
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
AM radio reception is weak or noisy.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.48).
Your area is too far from the FM station transmitter.
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Radio stations cannot be selected automatically.
The AM radio signal is weak.
Select the station manually (p.48).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
AM radio stations cannot be registered as
presets.
Auto Preset has been used.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.49).
APPENDIX ➤ Troubleshooting
En
111
USB and network
Problem
Cause
Remedy
The USB device is not connected to the USB jack securely.
Turn off the unit, reconnect your USB device, and turn the unit on again.
The file system of the USB device is not FAT16 or FAT32.
Use a USB device with FAT16 or FAT32 format.
Folders and files in the USB device cannot be
viewed.
The data in the USB device is protected by the encryption.
Use a USB device without an encryption function.
The network feature does not function.
The network parameters (IP address) have not been obtained
properly.
Enable the DHCP server function on your router and set “DHCP” in the “Setup”
menu to “On” on the unit (p.92). If you want to configure the network parameters
manually, check that you are using an IP address which is not used by other
network devices in your network (p.92).
The media sharing setting is not correct.
Configure the sharing setting and select the unit as a device to which music
contents are shared (p.60).
Some security software installed on your PC is blocking the access
of the unit to your PC.
Check the settings of security software installed on your PC.
The unit and PC are not in the same network.
Check the network connections and your router settings, and then connect the
unit and the PC to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your PC to allow it to access to the unit (p.92).
The files are not supported by the unit or the media server.
Use the file format supported by both the unit and the media server. For
information about the file formats supported by the unit, see “Playing back music
stored on media servers (PCs/NAS)” (p.60).
The selected Internet radio station is currently not available.
There may be a network problem at the radio station, or the service may have
been stopped. Try the station later or select another station.
The selected Internet radio station is currently broadcasting
silence.
Some Internet radio stations broadcast silence at certain of times of the day. Try
the station later or select another station.
Access to the network is restricted by the firewall settings of your
network devices (such as the router).
Check the firewall settings of your network devices. The Internet radio can be
played only when it passes through the port designated by each radio station.
The port number varies depending on the radio station.
The unit and smartphone/tablet are not in the same network.
Check the network connections and your router settings, and then connect the
unit and smartphone/tablet to the same network.
The MAC address filter is enabled on the unit.
In “MAC Address Filter” in the “Setup” menu, disable the MAC address filter or
specify the MAC address of your smartphone/tablet to allow it to access to the
unit (p.92).
It may not be possible depending on the condition of the network.
Update the firmware via the network again or use a USB memory device (p.100).
The unit does not detect the USB device.
The unit does not detect the PC.
The files in the PC cannot be viewed or played
back.
The Internet radio cannot be played.
The application for smartphone/tablet “AV
Controller” does not detect the unit.
Firmware update via the network is failed.
APPENDIX ➤ Troubleshooting
En
112
Error indications on the front display
Message
Cause
Remedy
Access denied
Access to the PC is denied.
Configure the sharing settings and select the unit as a device to which music contents are shared
(p.60).
Access error
The unit cannot access the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot access the iPod.
Turn off the iPod and turn it on again.
The connected iPod is not supported by the unit.
Use an iPod supported by the unit (p.53).
Make sure your router and modem are turned on.
There is a problem with the signal path from the network to the unit.
Check the connection between the unit and your router (or hub) (p.31).
Check SP Wires
The speaker cables short circuit.
Twist the bare wires of the cables firmly and connect to the unit and speakers properly.
Internal Error
An internal error has occurred.
Contact the nearest authorized Yamaha dealer or service center.
MHL Overloaded
An overcurrent is flowing through the MHL-compatible mobile
device.
Turn off the unit and check the connection between the unit and mobile device.
No content
There are no playable files in the selected folder.
Select a folder that contains files supported by the unit.
The unit cannot detect the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
The unit cannot detect the iPod.
Turn off the iPod and then turn it on again.
Please wait
The unit is preparing for connecting to the network.
Wait until the message disappears. If the message stays more than 3 minutes, turn off the unit and turn
it on again.
RemID Mismatch
The remote control IDs of the unit and the remote control are not
identical.
Change the remote control ID of the unit or the remote control (p.99).
The unit cannot play back the songs stored on the iPod for some
reason.
Check the song data. If it cannot be played on the iPod itself, the song data or storage area may be
defective.
The unit cannot play back the songs stored on the PC for some
reason.
Check if the format of files you are trying to play is supported by the unit. For information about the
formats supported by the unit, see “Playing back music stored on media servers (PCs/NAS)” (p.60). If
the unit supports the file format, but still cannot play back any files, the network may be overloaded with
heavy traffic.
No device
Unable to play
USB Overloaded
An overcurrent is flowing through the USB device.
Turn off the unit and reconnect your USB device. If the problem persists, try another USB device.
Version error
Firmware update is failed.
Update the firmware again.
APPENDIX ➤
Error indications on the front display
En
113
Ideal speaker layout
Use this diagram as a guide. You do not need to adjust the speaker layout to the following diagram exactly.
Q
W
0.5 to 1 m
(1.6 to 3.3 ft)
0.5 to 1 m
(1.6 to 3.3 ft)
1.8 m
(5.9 ft)
1
9
1.8 m
(5.9 ft)
2
3
9
Turn it slightly inward to
reduce wall reflections.
Turn it slightly inward to
reduce wall reflections.
4
5
10° to 30°
10° to 30°
1 Front speaker (L)
2 Front speaker (R)
3 Center speaker
6
7
4 Surround speaker (L)
5 Surround speaker (R)
6 Surround back speaker (L)
7 Surround back speaker (R)
0.3 m (1 ft) or more
Q Presence speaker (L)
W Presence speaker (R)
9 Subwoofer
APPENDIX
➤ Ideal speaker layout
En
114
Glossary
Audio information
■ Audio decoding format
Dolby Digital
Dolby Digital is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
Dolby Digital EX
Dolby Digital EX creates total 6.1-channel audio from 5.1-channel sources that are recorded with Dolby
Digital Surround EX. This decoder adds a surround back sound to the original 5.1-channel sound.
Dolby Digital Plus
Dolby Digital Plus is a compressed digital audio format developed by Dolby Laboratories, Inc. that supports
7.1-channel audio. Dolby Digital Plus remains fully compatible with the existing multichannel audio systems
that support Dolby Digital. This technology is used for audio on BD (Blu-ray discs).
Dolby Pro Logic II
Dolby Pro Logic II enables 5-channel playback from 2-channel sources. There are three modes available:
“Music mode” for music sources, “Movie mode” for movie sources, and “Game mode” for game sources.
Dolby Pro Logic IIx
DTS Express
DTS Express is a compressed digital audio format that supports 5.1-channel audio and allows a higher
compression rate than the DTS Digital Surround format developed by DTS, Inc. This technology is
developed for audio streaming services on the Internet and secondary audio on BD (Blu-ray discs).
DTS-HD High Resolution Audio
DTS-HD High Resolution Audio is a compressed digital audio format developed by DTS, Inc. that supports
7.1-channel and 96 kHz/24-bit audio. DTS-HD High Resolution Audio remains fully compatible with the
existing multichannel audio systems that support DTS Digital Surround. This technology is used for audio on
BD (Blu-ray discs).
DTS-HD Master Audio
DTS-HD Master Audio is an advanced lossless audio format developed to offer a high-definition home
theater experience with the quality of the studio master by DTS, Inc. DTS-HD Master Audio can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
DTS Neo:6
DTS Neo:6 enables 6-channel playback from 2-channel sources. There are two modes available: “Music
mode” for music sources and “Cinema mode” for movie sources. This technology provides discrete
full-bandwidth matrix channels of surround sound.
DSD (Direct Stream Digital)
Dolby Pro Logic IIx enables 7-channel playback from 2-channel or multichannel sources. There are three
modes available: “Music mode” for music sources, “Movie mode” for movie sources and “Game mode” for
game sources (for 2-channel sources only).
DSD (Direct Stream Digital) technology stores audio signals on digital storage media, such as SACD (Super
Audio CDs). The signals are stored at a high-frequency sampling rate of 2.8224 MHz. The highest
frequency response is equal to or higher than 100 kHz, with a dynamic range of 120 dB. This technology
offers better audio quality than that used for CDs.
Dolby TrueHD
FLAC
Dolby TrueHD is an advanced lossless audio format developed by Dolby Laboratories, Inc. to offer a
high-definition home theater experience with the quality of the studio master. Dolby TrueHD can carry up to
eight channels of 96 kHz/24-bit audio (up to six channels of 192 kHz/24-bit audio) simultaneously. This
technology is used for audio on BD (Blu-ray discs).
FLAC is a file format for lossless audio data compression. FLAC is inferior to lossy compressed audio
formats in compression rate but provides higher audio quality.
DTS 96/24
DTS 96/24 is a compressed digital audio format that supports 5.1-channel and 96 kHz/24-bit audio. This
format remains fully compatible with the existing multichannel audio systems that support DTS Digital
Surround. This technology is used for music DVDs, etc.
DTS Digital Surround
DTS Digital Surround is a compressed digital audio format developed by DTS, Inc. that supports
5.1-channel audio. This technology is used for audio on most DVD discs.
DTS-ES
DTS-ES creates total 6.1-channel audio from 5.1-channel sources that are recorded with DTS-ES. This
decoder adds a surround back sound to the original 5.1-channel sound. In the DTS-ES Matrix 6.1 format, a
surround back sound is recorded in the surround channels, and in the DTS-ES Discrete 6.1 format, a
discrete surround back channel is recorded.
MP3
One of the compressed digital audio format used by MPEG. With psychoacoustic technologies, this
compression method achieves a high compression rate. Reportedly, it is capable of compressing data
quantity by about 1/10 maintaining a certain level of audio quality.
MPEG-4 AAC
An MPEG-4 audio standard. It is used for mobile telephones, portable audio players, and audio streaming
services on Internet because it allows a high compression rate of data while maintaining better audio quality
than MP3.
PCM (Pulse Code Modulation)
PCM is a signal format under which an analog audio signal is digitized, recorded, and transmitted. This
technology is the basis of all other audio format. This technology is used as a lossless audio format called
Linear PCM for audio on a variety of media, including CDs and BD (Blu-ray discs).
APPENDIX ➤ Glossary
En
115
Sampling frequency/Quantization bit
Sampling frequency and quantization bits indicate the quantity of information when an analog audio signal
is digitized. These values are noted as in the following example: “48 kHz/24-bit”.
• Sampling frequency
Sampling frequency (the number of times the signal is sampled per second) is called the sampling rate.
When the sampling frequency is higher, the range of frequencies that can be played back are wider.
• Quantization bit
The number of quantization bits indicate the degree of accuracy when converting the sound level into a
numeric value. When the number of quantized bits is higher, the expression of the sound level is more
accurate.
WAV
Windows standard audio file format, which defines the method of recording the digital data obtained by
converting audio signals. By default, the PCM method (no compression) is used, but you can also use other
compression methods.
WMA (Windows Media Audio)
One of the compressed digital audio formats developed by Microsoft Corporation. With psychoacoustic
technologies, this compression method achieves a high compression rate. Reportedly, it is capable of
compressing data quantity by about 1/20 maintaining a certain level of audio quality.
■ Others
Bi-amplification connection (Bi-amp)
A bi-amplification connection uses two amplifiers for a speaker. When you use the bi-amplification
connection, the unit drives the tweeter and woofer in a speaker with the discrete amplifiers. As a
consequence, the tweeter and woofer provide clear audio signal without the interference.
LFE (Low Frequency Effects) 0.1 channel
This channel reproduces low-frequency bass signals and has a frequency range from 20 Hz to 120 Hz. This
channel is added to the channels for all bands with Dolby Digital or DTS to enhance low frequency audio
effects. This channel is labeled 0.1 because it is limited to only low frequency audio.
Lip sync
Video output sometimes lags behind audio output due to the complexity of signal processing caused by an
increase in video signal capacity. Lip sync is a technique for automatically correcting the timing lag
between audio and video output.
HDMI and video information
Component video signal
With the component video signal system, the video signal is separated into the Y signal for luminance and
the Pb and Pr signals for chrominance. Color can be reproduced more faithfully with this system because
each of these signals is independent.
Composite video signal
With the composite video signal system, color, brightness, and synchronization data signals are combined
and transmitted with a single cable.
Deep Color
Deep Color is a technology that HDMI specification supports. Deep Color increases the number of available
colors within the boundaries defined by the RGB or YCbCr color space. Conventional color systems
process the color using 8 bits. Deep Color processes the color with 10, 12, or 16 bits. This technology
allows HDTVs and other displays to increase from millions of colors to billions of colors and eliminate
on-screen color banding for smooth tonal transitions and subtle gradations between colors.
HDMI
HDMI (High-Definition Multimedia Interface) is the world-wide standard interface for digital audio/video
signal transmission. This interface transmits both digital audio and digital video signals using a single cable
without any loss. HDMI complies with HDCP (High-bandwidth Digital Content Protection) and provides a
secure audio/video interface. For further information on HDMI, visit the HDMI website at
“http://www.hdmi.org/”.
MHL
MHL (Mobile High-definition Link) is the interface standard for high-speed digital video signal transmission
that is developed for mobile devices. This interface transmits both digital audio and digital video signals
from mobile devices (such as smartphones) using a single cable with any loss. As with HDMI, MHL
complies with HDCP (High-bandwidth Digital Content Protection).
x.v.Color
“x.v.Color” is a technology that the HDMI specification supports. It is a more extensive color space than
sRGB and allows the expression of colors that were not hitherto possible. While remaining compatible with
the color gamut of sRGB standards, “x.v.Color” expands the color space, and thus can produce more vivid,
natural images.
APPENDIX ➤ Glossary
En
116
Yamaha technologies
CINEMA DSP (Digital Sound Field Processor)
Since the Dolby Surround and DTS systems were originally designed for use in movie theaters, their effect is
best experienced in a theater that has many speakers designed for acoustic effects. Since home conditions
(such as room size, wall material, and number of speakers) can differ so widely, it is inevitable that there are
differences in the sound that you hear. Based on a wealth of actually measured data, CINEMA DSP,
Yamaha’s original DSP technology provides the audiovisual experience of a movie theater in your own
home.
CINEMA DSP 3D
The actually measured sound field data contain the information of the height of the sound images. CINEMA
DSP 3D mode achieves the reproduction of the accurate height of the sound images so that it creates the
accurate and intensive 3D sound fields in a listening room.
Compressed Music Enhancer
The Compressed Music Enhancer feature compensates for missing harmonics in compression music
formats (such as MP3). As a result, this technology provides improved performance for the overall sound
system.
SILENT CINEMA
Yamaha has developed a natural, realistic sound effect DSP algorithm for headphones. Parameters for
headphones have been set for each sound program, so that accurate representations of all the sound
programs can be enjoyed on headphones.
Virtual CINEMA DSP
Virtual CINEMA DSP allows the system to virtually reproduce the sound field of the surround speakers with
front left and right speakers. Even if the surround speakers are not connected, the unit creates the realistic
sound field in a listening room.
Virtual Presence Speaker (VPS)
Virtual Presence Speaker allows the system to virtually reproduce the height of the 3D sound field without
front presence speakers. Even if the front presence speakers are not connected, the unit creates the 3D
sound field in your room.
APPENDIX ➤ Glossary
En
117
Video signal flow
Video signals input from a video device to the unit are
output to a TV as shown below.
■ Video conversion table
• You can select the resolution and the aspect ratio applied to HDMI-output video processing in “Video Mode” (p.89) in the “Setup” menu.
• The unit does not convert 480-line and 576-line video signals interchangeably.
HDMI out
Video device
The unit
TV
Resolution
480i/
576i
480p/
576p
720p
1080i
1080p
4K
480i/576i
m
m
m
m
m
m
m
m
m
m
m
720p
m
m
m
m
1080i
m
m
m
m
1080p/50, 60 Hz
m
m
m
m
m
m
480p/576p
HDMI in
HDMI out
HDMI
HDMI
HDMI
HDMI
HDMI in
1080p/24 Hz
COMPONENT
VIDEO
COMPONENT
VIDEO
COMPONENT
VIDEO out
COMPONENT
VIDEO
480i/576i
COMPONENT
VIDEO
PR
PR
PR
PR
PB
PB
PB
PB
Y
Y
Y
Y
VIDEO
VIDEO
in
VIDEO
out
VIDEO
VIDEO
COMPONENT
VIDEO in
m
m
m
m
m
m
VIDEO in
720p
1080i
480i/
576i
m
m
720p
480i/576i
480p/
576p
m
480p/576p
m
1080i
VIDEO
480i/
576i
m
4K
COMPONENT
VIDEO in
VIDEO
out
COMPONENT VIDEO out
m
m
m
m
m
m
m
m: Available
APPENDIX ➤ Glossary
En
118
(Example)
Information on HDMI
HDMI Control
HDMI Control
HDMI Control
HDMI Control allows you to operate external devices via HDMI. If you connect a TV that
supports HDMI Control to the unit with an HDMI cable, you can control the unit (such as
power and volume) with TV remote control operations. You can also control playback
devices (such as HDMI Control-compatible BD/DVD players) connected to the unit with
an HDMI cable.
For details on connections, see “Connecting a TV” (p.21) and “Connecting video
devices (such as BD/DVD players)” (p.26).
Operations available from the TV’s remote control
Press SCENE (BD/DVD)
To use HDMI Control, you need to perform the following HDMI Control link setup after
connecting the TV and playback devices.
• This setup is required every time you add a new HDMI Control-compatible device to your system.
• Standby synchronization
• Volume control including mute
• Switching to input audio from the TV when the TV input is switched to its built-in tuner
• Switching to input video/audio from the selected playback device
1
2
• Switching between audio output devices (the unit or TV speaker)
HDMI Control
Playback device
also turns off
The unit turns off
(standby)
Turn off the TV
Operations available from the unit’s remote control
• Starting playback on the playback device and turning on the TV with a scene
selection (p.41)
• Switching the TV input to display the on-screen menu (when ON SCREEN is pressed)
• Controlling the playback device (playback and menu operations) without registering
remote control codes (p.103)
Turn on the unit, TV, and playback devices.
Enable HDMI Control on the unit, TV, and playback devices (such as
HDMI Control-compatible BD/DVD players).
To enable HDMI Control on the unit, set “HDMI Control” (p.90) in the “Setup”
menu to “On” and configure the related items (“TV Audio Input”, “ARC”, and
“Standby Sync”).
(Example)
HDMI Control
Turns on and displays
video from the playback
device
Playback starts
3
Turn off the main power of the TV and then turn off the unit and
playback devices.
4
5
6
Turn on the unit and playback devices and then turn on the TV.
Switch the TV input to display the video from the unit.
Check the followings.
On the unit: The input to which the playback device is connected is selected.
If not, select the input source manually.
On the TV: The video from the playback device is displayed.
APPENDIX
➤ Information on HDMI
En
119
7
Check that the unit is properly synchronized with the TV by turning
off the TV or adjusting the TV volume with the TV remote control.
HDMI signal compatibility
Audio signals
Audio signal type
Audio signal format
Compatible media (example)
2ch Linear PCM
2ch, 32 to 192 kHz, 16/20/24 bit
CD, DVD-Video, DVD-Audio
• If the unit is not synchronized to the TV’s power operations, check the priority of the audio output setting on
the TV.
Multichannel Linear PCM
8ch, 32 to 192 kHz, 16/20/24 bit
DVD-Audio, BD (Blu-ray disc),
HD DVD
• We recommend using TV and playback devices from the same manufacturer so that HDMI Control works
more effectively.
DSD
2 to 5.1ch, 2.8224 MHz, 1 bit
SACD
Bitstream
Dolby Digital, DTS
DVD-Video
Bitstream
(High definition audio)
Dolby TrueHD, Dolby Digital Plus,
DTS-HD Master Audio, DTS-HD
BD (Blu-ray disc), HD DVD
High Resolution Audio, DTS
Express
• If HDMI Control does not work properly, try unplugging the TV in Step 2 and plugging in the TV again in
Step 3. It may solve the problem. Also, HDMI Control may not work if the number of connected devices
exceeds the limit. In this case, disable HDMI Control on the devices not in use.
Video signals
The unit is compatible with the video signals of the following resolutions:
• VGA
• 720p/60 Hz, 50 Hz
• 480i/60 Hz
• 1080i/60 Hz, 50 Hz
• 576i/50 Hz
• 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
• 480p/60 Hz
• 4K/30 Hz, 25 Hz, 24 Hz
• 576p/50 Hz
• When CPPM copy-protected DVD-Audio is played back, video/audio signals may not be output, depending
on the type of the DVD player.
• The unit is not compatible with HDCP-incompatible HDMI or DVI devices. For details, refer to the instruction
manual for each device.
• To decode audio bitstream signals on the unit, set the input source device appropriately so that the device
outputs the bitstream audio signals directly (does not decode the bitstream signals on the playback device).
For details, refer to the instruction manual for the playback device.
APPENDIX
➤ Information on HDMI
En
120
Trademarks
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX and the double-D
symbol are trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872;
7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the
Symbol, & DTS-HD and the Symbol together are registered trademarks & DTS-HD Master Audio is a
trademark of DTS, Inc.
Product includes software. © DTS, Inc. All Rights Reserved.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory
standards.
Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod nano, and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
MHL and the MHL logo are a trademark, registered trademark or service mark of MHL, LLC in the United
States and/or other countries.
x.v.Color™
“x.v.Color” is a trademark of Sony Corporation.
“SILENT CINEMA” is a trademark of Yamaha Corporation.
DLNA™ and DLNA CERTIFIED™ are trademarks or registered trademarks of Digital Living Network
Alliance. All rights reserved. Unauthorized use is strictly prohibited.
Windows™
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Internet Explorer, Windows Media Audio and Windows Media Player are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
Android™
Android is a trademark of Google Inc.
This receiver supports network connections.
APPENDIX
➤ Trademarks
En
121
Specifications
Input jacks
Other jacks
MHL
• Analog Audio
• YPAO MIC x 1
• Video Format (Repeater Mode)
Audio x 4 (AV 5–6, AUDIO 1–2)
• REMOTE IN x 1
• Digital Audio (Supported frequencies: 32 kHz to 96 kHz)
Optical x 2 (AV 1, AV 4)
Coaxial x 2 (AV 2–3)
• Video
• REMOTE OUT x 1
- 480p/60 Hz
- 576p/50 Hz
Component x 2 (AV 1–2)
• HDMI features: Deep Color, “x.v.Color,” Auto Lip Sync, ARC
(Audio Return Channel), 3D, 4K
• Video Format (Repeater Mode)
* V-AUX: MHL input compatible
- VGA
• Other
- 576i/50 Hz
• DC OUT x 1
HDMI
HDMI x 6 (HDMI 1–5, V-AUX*)
- 480i/60 Hz
• TRIGGER OUT x 1
Composite x 5 (AV 3–6, VIDEO [Front Panel])
• HDMI Input
- VGA
- 480i/60 Hz
- 720p/60 Hz, 50 Hz
- 1080i/60 Hz, 50 Hz
- 1080p/30 Hz, 25 Hz, 24 Hz
• Audio Format
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• Current Supply Capacity: 1.0 A
USB x 1 (USB2.0)
- 576i/50 Hz
TUNER
NETWORK x 1 (100Base-TX/10Base-T)
- 480p/60 Hz
• Analog Tuner
Output jacks
• Analog Audio
- Speaker Out x 9 (7 ch) (FRONT L/R, CENTER,
SURROUND L/R, SURROUND BACK
L/R*1,
EXTRA SP
L/R*2)
- 576p/50 Hz
[Europe models]
- 720p/60 Hz, 50 Hz
FM/AM with Radio Data System x 1 (TUNER)
- 1080i/60 Hz, 50 Hz
[Other models]
- 1080p/60 Hz, 50 Hz, 30 Hz, 25 Hz, 24 Hz
FM/AM x 1 (TUNER)
- 4K/30 Hz, 25 Hz, 24 Hz
*1 Note: Assignment is possible [SURROUND BACK,
BI-AMP (FRONT L/R)]
*2 Note: Assignment is possible [ZONE2, PRESENCE]
- Subwoofer Out x 2 (SUBWOOFER 1–2, mono)
- AV OUT x 1
- ZONE2 OUT x 1
- Headphone x 1
• Video
MONITOR OUT
- Component x 1
• Audio Format
- Dolby TrueHD
USB
• Capable of iPod, Mass Storage Class USB Memory
- Dolby Digital Plus
• Current Supply Capacity: 2.1 A
- Dolby Digital
Network
- DTS-HD Master Audio
- DTS-HD High Resolution Audio
• PC Client Function
- DTS Express
• Compatible with DLNA ver. 1.5
- DTS
• AirPlay supported
- DSD 2-ch to 6-ch
- PCM 2-ch to 8-ch (Max. 192 kHz/24-bit)
• Internet Radio
- Composite x 1
AV OUT
- Composite x 1
• Content Protection: HDCP compatible
• Link Function: CEC supported
• HDMI Output
HDMI OUT x 1
APPENDIX ➤ Specifications
En
122
Compatible Decoding Formats
• Decoding Format
- Dolby TrueHD, Dolby Digital Plus
- Dolby Digital, Dolby Digital EX
- DTS-HD Master Audio, DTS-HD High Resolution Audio,
DTS Express
• Input Sensitivity / Input Impedance
AV 5 etc. (1 kHz, 100 W/8 ).............................. 200 mV/47 k
• Maximum Input Signal
AV 5 etc. (1 kHz, 0.5% THD, Effect On) ............................2.3 V
• Output Level / Output Impedance
AV OUT.............................................................. 200 mV/1.2 k
- DTS 96/24, DTS-ES Matrix 6.1, DTS-ES Discrete 6.1
SUBWOOFER........................................................... 1 V/1.2 k
- DTS Digital Surround
ZONE2 OUT ...................................................... 200 mV/1.2 k
• Post Decoding Format
- Dolby Pro Logic
- Dolby Pro Logic II Music, Dolby Pro Logic II Movie,
Dolby Pro Logic II Game
- Dolby Pro Logic IIx Music, Dolby Pro Logic IIx Movie,
Dolby Pro Logic IIx Game
- DTS Neo:6 Music, DTS Neo:6 Cinema
Audio Section
• Rated Output Power (2-channel driven)
(20 Hz to 20 kHz, 0.09% THD, 8 )
Front L/R .................................................................90 W+90 W
(1 kHz, 0.9% THD, 8 )
Front L/R .............................................................105 W+105 W
Center ............................................................................. 105 W
Surround L/R.......................................................105 W+105 W
Surround Back L/R .............................................105 W+105 W
• Rated Output Power (1-channel driven)
(1 kHz, 0.9% THD, 8 )
Front L/R .................................................................... 125 W/ch
Center ....................................................................... 125 W/ch
• Headphone Jack Rated Output / Impedance
AV 5 etc. (1 kHz, 50 mV, 8 ) ............................. 100 mV/560 
• Frequency Response
AV 5 etc. to Front (10 Hz to 100 kHz) ..........................+0/-3 dB
• Total Harmonic Distortion
AV 5 etc. to Front (Pure Direct)
(20 Hz to 20 kHz, 50 W, 8 )............................... 0.06% or less
• Signal to Noise Ratio (IHF-A Network)
AV 5 etc. (Input Shorted 250 mV, Speaker Out)
......................................................................... 100 dB or more
• Residual Noise (IHF-A Network)
Front L/R (Speaker Out) ..................................... 150 µV or less
• Channel Separation
AV 5 etc. (Input 5.1 k Shorted, 1 kHz/10 kHz)
................................................................ 60 dB/45 dB or more
• Volume Control
Range............................................. MUTE, -80 dB to +16.5 dB
Step ................................................................................ 0.5 dB
• Tone Control Characteristics
Video Section
• Video Signal Type
[U.S.A. model]..................................................................NTSC
[Other models] ....................................................................PAL
• Video Signal Type (Video Conversion)..................... NTSC/PAL
• Video Signal Level
Composite..............................................................1 Vp-p/75 
Component
Y ..........................................................................1 Vp-p/75 
Pb/Pr ................................................................0.7 Vp-p/75 
• Video Maximum Input Level (Video Conversion Off)
....................................................................... 1.5 Vp-p or more
• Video Signal to Noise Ratio................................ 50 dB or more
• Monitor Out Frequency Response (Video Conversion Off)
Component ............................................5 Hz to 60 MHz, -3 dB
FM Section
• Tuning Range
[U.S.A. model]..............................................87.5 to 107.9 MHz
[Other models] ................................ 87.50 MHz to 108.00 MHz
• 50 dB Quiet Sensitivity (IHF, 1 kHz, 100% MOD.)
Mono ................................................................. 3 µV (20.8 dBf)
• Signal to Noise Ratio (IHF)
Mono ................................................................................71 dB
Stereo...............................................................................69 dB
• Harmonic Distortion (IHF, 1 kHz)
Mono ................................................................................. 0.3%
Stereo................................................................................ 0.5%
Surround L/R.............................................................. 125 W/ch
Bass Boost/Cut............................. ±6 dB/0.5 dB Step at 50 Hz
Surround Back L/R .................................................... 125 W/ch
Bass Turnover ............................................................... 350 Hz
(1 kHz, 0.9% THD, 4 )
Treble Boost/Cut..........................±6 dB/0.5 dB Step at 20 kHz
AM section
Front L/R [Europe models] ........................................ 150 W/ch
Treble Turnover..............................................................3.5 kHz
• Tuning Range
• Dynamic Power (IHF)
Front L/R (8/6/4/2 ) .................................. 130/170/200/240 W
• Damping Factor
Front L/R, 20 Hz to 20 kHz, 8 ............................. 100 or more
• Filter Characteristics
(fc=40/60/80/90/100/110/120/160/200 Hz)
• Antenna Input................................................ 75  unbalanced
[U.S.A. model]................................................. 530 to 1710 kHz
[Other models] .........................................531 kHz to 1611 kHz
H.P.F. (Front, Center, Surround, Surround Back) ...... 12 dB/oct.
L.P.F. (Subwoofer)..................................................... 24 dB/oct.
APPENDIX ➤ Specifications
En
123
General
• Power Supply
[U.S.A. model] ................................................ AC 120 V, 60 Hz
[Australia model] ............................................ AC 240 V, 50 Hz
[Europe model]............................................... AC 230 V, 50 Hz
• Power Consumption
[U.S.A. model] .................................................... 400 W/500 VA
[Other models]................................................................ 300 W
• Standby Power Consumption
HDMI Control Off, Standby Through Off
[U.S.A. model] ....................................................0.10 W or less
[Other models]....................................................0.15 W or less
HDMI Control On, Standby Through On (No Signals)
.................................................................................3 W or less
Network Standby On ...............................................3 W or less
• Dimensions (W x H x D)
...................... 435 x 171 x 364 mm (17-1/8” x 6-3/4” x 14-3/8”)
* Including legs and protrusions
• Weight........................................................... 10.0 kg (22.1 lbs)
* Specifications are subject to change without notice.
APPENDIX ➤ Specifications
En
124
Index
Symbols
★ keys 11
Exclamation mark (!)
Lock icon (o) 96
98, 105
Numerics
16:9 Normal (Aspect, Setup menu) 90
2.1-channel system 15
2ch Stereo (sound program) 45
3.1-channel system 15
4.1-channel system 15
4K signal (video signal resolution) 120
5.1-channel system 15
5ch BI-AMP (Power Amp Assign, Setup menu) 85
6.1-channel system 14, 18
7.1+2-channel system 14, 17
7.1-channel system 14, 17, 18
7ch +1ZONE (Power Amp Assign, Setup menu) 85
7ch Stereo (sound program) 45
A
Access denied (error indication) 113
Access error (error indication) 113
Action Game (sound program) 44
Adaptive DRC (Option menu) 73
Adaptive DSP Level (Sound, Setup menu)
Adjustment (Lipsync, Setup menu) 88
ADVANCED SETUP menu 99
Adventure (sound program) 44
AirPlay 65
AM antenna connection 30
AM radio listening 48
Amp (Audio Output, Setup menu) 91
ARC (Audio Return Channel) 21
ARC (HDMI Control, Setup menu) 91
Aspect (Video Mode, Setup menu) 90
Audio Decoder (front display information)
Audio device connection 29
89
71
Audio file format (PC/NAS) 60
Audio file format (USB storage device) 57
Audio In (Input menu) 76
AUDIO jack 20
Audio Output (HDMI, Setup menu) 91
Audio Return Channel (ARC) 21
Audio Signal (Information menu) 98
Auto Power Standby (ECO, Setup menu) 96
Auto Preset (FM radio) 52
Auto Setup (Speaker, Setup menu) 35
Auto/Manual Select (Lipsync, Setup menu) 88
Automatic speaker setting optimization 35
Automatic station preset (FM radio) 52
AutoPowerStdby (ECO, Setup menu) 96
AV OUT jack 10
B
Banana plug 18
Basic playback operation 40
Bass (Tone Control, Option menu) 73
Bass Cross Over (Speaker, Setup menu) 86
Bi-amp speaker connection 19
Bitrate (Audio Signal, Information menu) 98
Bitstream 120
C
CAT-5 cable 31
Cellar Club (sound program) 45
Center (Speaker, Setup menu) 85
Center Image (Sound Program menu) 81
Center Width (Sound Program menu) 81
Chamber (sound program) 45
Channel (Audio Signal, Information menu) 98
Check SP Wires (error indication) 113
Check Sur. (YPAO error message) 38
CINEMA DSP 3D 43
CINEMA DSP 3D Mode (Option menu) 73
CLASSICAL (sound program subcategory) 45
Clear Preset (FM/AM radio) 52
Clock Time (Radio Data System) 50
COAXIAL jack 20
Component video cable 20
Component video connection (video device) 26
COMPONENT VIDEO jack 20
Composite video connection (video device) 27
Compressed Music Enhancer 47
Configuration (Speaker, Setup menu) 85
Crossover frequency setting 86
Crossover frequency setting (subwoofer) 35
D
DC OUT (Function, Setup menu) 95
DC OUT jack 10
Decode Type (Sound Program menu) 80
Decoder Mode (Input menu) 76
Decoder Off (front display information) 71
Default Gateway (IP Address, Setup menu) 92
Default Gateway (Network, Information menu) 98
Default setting restoration 100
Delay Enable (Lipsync, Setup menu) 88
Detail (Load, Scene menu) 78
Device Control (Load, Scene menu) 78
DHCP (IP Address, Setup menu) 92
Dialog Adjust (Option menu) 73
Dialog Lift (Dialog Adjust, Option menu) 73
Dialog Lvl (Dialog Adjust, Option menu) 73
Dialogue (Audio Signal, Information menu) 98
Dialogue Adjust (Option menu) 73
Dialogue Level (Dialogue Adjust, Option menu) 73
Dialogue Lift (Dialogue Adjust, Option menu) 73
Dialogue normalization level 98
Digital coaxial cable 20
Digital Media Controller (DMC) 77
Digital optical cable 20
Dimension (Sound Program menu) 81
Dimmer (Front Display) (Display Set, Setup menu) 94
APPENDIX
➤ Index
En
125
Direct (Sound Program menu) 81
Direct Stream Digital (DSD) 115
DISPLAY key 11
Display Set (Function, Setup menu) 94
Distance (Speaker, Setup menu) 87
Distance (YPAO measurement result) 37
DLNA 60
DMC (Digital Media Controller) 77
DMC Control (Input menu) 77
DNS Server (IP Address, Setup menu) 92
DNS Server (Network, Information menu) 98
Dolby Digital EX (Extended Surround) 74
Dolby Pro Logic (surround decoder) 46
Dolby Pro Logic II Game (surround decoder) 46
Dolby Pro Logic II Movie (surround decoder) 46
Dolby Pro Logic II Music (surround decoder) 46
Dolby Pro Logic IIx Game (surround decoder) 46
Dolby Pro Logic IIx Movie (Extended Surround) 74
Dolby Pro Logic IIx Movie (surround decoder) 46
Dolby Pro Logic IIx Music (Extended Surround) 74
Dolby Pro Logic IIx Music (surround decoder) 46
Drama (sound program) 44
DSD (Direct Stream Digital) 115
DSP Level (Sound Program menu) 80
DSP Program (front display information) 71
DTS Neo:6 Cinema (surround decoder) 46
DTS Neo:6 Music (surround decoder) 46
DTS-ES (Extended Surround) 74
Dynamic Range (Sound, Setup menu) 88
E
ECO (Setup menu) 96
ECO Mode (ECO, Setup menu) 96
Enhancer (Option menu) 74
ENHANCER (sound mode) 47
ENTERTAINMENT (sound program subcategory)
Error indication (front display) 113
EX/ES (Extended Surround, Option menu) 74
EXTD Surround (Option menu) 74
Extended Surround (Option menu) 74
44
External device control (remote control) 102
External device operation key (remote control)
Extra Bass (Speaker, Setup menu) 86
High speed HDMI cable
11
F
Filter (MAC Address Filter, Setup menu) 92
Firmware update 100
Firmware update (network) 100, 105
Firmware update (USB) 100
Firmware Version (System, Information menu) 98
Firmware version check 101
FM antenna connection 30
FM Mode (Option menu) 74
FM radio listening 48
FM/AM radio tuning 48
Format (Audio Signal, Information menu) 98
Frequency (FM/AM radio) 48
Front (Speaker, Setup menu) 85
Front / Rear Balance (Sound Program menu) 81
Front display (part names and functions) 9
Front display brightness 94
Front display information 71
Front panel (part names and functions) 8
Front panel jack connection 29
Front Presence (Speaker, Setup menu) 86
Function (Setup menu) 94
H
Hall in Munich (sound program) 45
Hall in Vienna (sound program) 45
HDMI (Setup menu) 90
HDMI cable 20
HDMI connection (video device) 26
HDMI Control (HDMI, Setup menu) 90
HDMI jack 20
HDMI Monitor (Information menu) 98
HDMI OUT (Audio Output, Setup menu)
HDMI signal compatibility 120
Headphones 43
Height Balance (Sound Program menu)
High definition audio 120
20
I
In.Trim (Volume Trim, Option menu) 74
Indicator (part names and functions) 9
INFO key 8, 11
Information display (front display) 9
Information menu 97
Information switching (front display) 71
INIT (ADVANCED SETUP menu) 100
Initial Delay (Sound Program menu) 80
Initial Volume (Sound, Setup menu) 89
Initial Volume (Zone2 Set, Setup menu) 94
Input (Audio Signal, Information menu) 98
Input (front display information) 71
Input menu 75
Input selection key (remote control) 11
Input Trim (Volume Trim, Option menu) 74
Internal Error (error indication) 113
Internal Error (YPAO error message) 38
Internet radio listening 63
IP Address (Network, Information menu) 98
IP Address (Network, Setup menu) 92
iPod charge 53
iPod connection 53
iPod content playback 54
iPod content playback (AirPlay) 65
iTunes content playback (AirPlay) 65
L
91
81
Language (Setup menu) 97
Left / Right Balance (Sound Program menu) 81
Level (Sound Program menu) 81
Level (Speaker, Setup menu) 87
Level (YPAO measurement result) 37
Level Error (YPAO warning message) 39
LFE (Low Frequency Effects) 116
Lipsync 116
Lipsync (Sound, Setup menu) 88
LIVE/CLUB (sound program subcategory) 45
Liveness (Sound Program menu) 80
APPENDIX
➤ Index
En
126
Load (Scene menu) 78
Low Frequency Effects (LFE)
N
116
M
MAC Address (MAC Address Filter, Setup menu) 92
MAC Address (Network, Information menu) 98
MAC Address Filter (Network, Setup menu) 92
Main Zone Set (Multi Zone, Setup menu) 93
Manual Setup (Speaker, Setup menu) 85
Manual speaker configuration 85
Manual station preset (FM/AM radio) 49
Max Volume (Sound, Setup menu) 89
Max Volume (Zone2 Set, Setup menu) 94
Measurement result (YPAO) 37
Media sharing setup 60
Memory Guard (Function, Setup menu) 96
Menu language selection 34
Menu operation key (remote control) 11
MHL cable 20
MHL connection 30
MHL jack 20
MHL Overloaded (error indication) 113
MHL-compatible mobile device 30
MODE key 11
MON.CHK (ADVANCED SETUP menu) 100
Monaural Mix (Sound Program menu) 81
Monaural reception (FM radio) 48
Monitor check 100
Mono Movie (sound program) 44
MOVIE (sound program category) 44
MOVIE THEATER (sound program subcategory) 44
Multi Zone (Information menu) 98
Multi Zone (Setup menu) 93
Multiple room playback 67
Multi-zone 67
MUSIC (sound program category) 45
Music Video (sound program) 44
MUTE key 11
Muting 40
NAS (Network Attached Storage) 31
NAS connection 31
NAS content playback 60
Network (Information menu) 98
Network (Setup menu) 92
Network Attached Storage (NAS) 31
Network cable 31
Network connection 31
Network information 98
Network Name (Network, Information menu) 98
Network Name (Network, Setup menu) 93
Network Standby (Network, Setup menu) 92
No content (error indication) 113
No device (error indication) 113
No F.PRNS SP (YPAO error message) 38
No Front SP (YPAO error message) 38
No MIC (YPAO error message) 38
No Signal (YPAO error message) 38
No Sur. SP (YPAO error message) 38
Noisy (YPAO error message) 38
Normal (Wiring, YPAO measurement result) 37
NTSC (TV FORMAT, ADVANCED SETUP menu) 100
Numeric key (remote control) 11
O
ON SCREEN key 11
OPTICAL jack 20
OPTION key 11
Option menu 72
Out of Phase (YPAO warning message) 39
Output (Audio Signal, Information menu) 98
Over Distance (YPAO warning message) 39
P
PAL (TV FORMAT, ADVANCED SETUP menu)
Panorama (Sound Program menu) 81
Parametric EQ (Speaker, Setup menu) 87
PC connection 31
PC content playback 60
100
PHONES jack 8
Playback device connection 26
Playback device operation (remote control)
Please wait (error indication) 113
Power Amp Assign (Speaker, Setup menu)
Power cable connection 33
Power management 96
Power Mode (DC OUT, Setup menu) 95
Preset station selection (FM/AM radio) 49
Program Service (Radio Data System) 50
Program Type (Radio Data System) 50
Pure Direct 47
PURE DIRECT (sound mode) 47
103
85
Q
Q factor
87
R
Radio Data System (FM radio) 50
Radio Data System information 50
Radio Data System tuning 50
Radio Text (Radio Data System) 50
Rear panel (part names and functions) 10
Recording device connection 32
RemID Mismatch (error indication) 113
Remote connection 69
Remote control (part names and functions) 11
Remote control code registration
(playback device) 103
Remote control code registration (TV) 102
Remote Control Code Search 102, 103
Remote control ID setting 99
Remote control ID setting (remote control) 99
Remote control sensor 8
Remote control signal transmitter (remote control)
REMOTE ID (ADVANCED SETUP menu) 99
Remote ID (System, Information menu) 98
REMOTE IN jack 10
REMOTE OUT jack 10
Rename (input name) 76
Rename (network name) 93
APPENDIX
➤ Index
11
En
127
Rename (scene name) 79
Rename/Icon Select (Input menu) 76
Rename/Icon Select (Scene menu) 79
Repeat (iPod, Option menu) 56
Repeat (PC/NAS, Option menu) 62
Repeat (USB storage device, Option menu) 59
Reset (remote control) 104
Reset (Scene menu) 79
Resolution (Video Mode, Setup menu) 89
Reverb Delay (Sound Program menu) 81
Reverb Level (Sound Program menu) 81
Reverb Time (Sound Program menu) 81
Reverse (Wiring, YPAO measurement result) 37
Roleplaying Game (sound program) 44
Room Size (Sound Program menu) 80
Router connection 31
S
Sampling (Audio Signal, Information menu) 98
Save (Scene menu) 78
SBR → SBL (YPAO error message) 38
Scene configuration 41
SCENE function 41
SCENE link playback 41
Scene menu 77
Sci-Fi (sound program) 44
Setup menu 82
Short Message (Display Set, Setup menu) 94
Shuffle (iPod, Option menu) 56
Shuffle (PC/NAS. Option menu) 62
Shuffle (USB storage device, Option menu) 59
Signal information 98
SILENT CINEMA 43
Simple play (iPod) 55
Size (YPAO measurement result) 37
SLEEP key 11
Sleep timer 11
Sleep timer (Zone2) 70
Sound (Setup menu) 88
Sound field effect 43
Sound mode selection 42
Sound program 44, 45
Sound Program menu 79
SP IMP. (ADVANCED SETUP menu) 99
Speaker (Setup menu) 85
Speaker cable connection 18
Speaker connection 17
Speaker impedance 13
Speaker Impedance (System, Information menu) 98
Speaker impedance setting 16, 99
Speaker indicator (front display) 9
Speaker placement 13
Spectacle (sound program) 44
Sports (sound program) 44
Standard (sound program) 44
Standby indicator (front panel) 8
Standby Sync (HDMI Control, Setup menu) 91
Standby Through (HDMI, Setup menu) 91
Station preset (FM/AM radio) 49
Status (Network, Information menu) 98
STEREO (sound program subcategory) 45
Stereo pin cable (RCA cable) 20
Stereo reception (FM radio) 48
STP network cable 31
STRAIGHT (sound mode) 46
Straight decode 46
Subnet Mask (IP Address, Setup menu) 92
Subnet Mask (Network, Information menu) 98
Subwoofer (Speaker, Setup menu) 86
Subwoofer connection 19
Subwoofer Trim (Volume Trim, Option menu) 74
SUR.DECODE (sound mode) 46
Surround (Speaker, Setup menu) 85
Surround Back (Speaker, Setup menu) 86
Surround Back Initial Delay (Sound Program menu) 80
Surround Back Liveness (Sound Program menu) 80
Surround Back Room Size (Sound Program menu) 80
Surround decoder 46
Surround Initial Delay (Sound Program menu) 80
Surround Liveness (Sound Program menu) 80
Surround Room Size (Sound Program menu)
SW.Trim (Volume Trim, Option menu) 74
System (Information menu) 98
System ID (System, Information menu) 98
80
T
Target Zone (Trigger Output, Setup menu) 95
Test Tone (Speaker, Setup menu) 88
The Bottom Line (sound program) 45
The Roxy Theatre (sound program) 45
Tone Control (Option menu) 73
TONE CONTROL key 8
TP (Traffic Program) 50
Traffic information (Radio Data System) 50
Traffic Program (FM radio, Option menu) 50
Treble (Tone Control, Option menu) 73
Trigger function 32
Trigger Mode (Trigger Output, Setup menu) 95
TRIGGER OUT jack 10
Trigger Output (Function, Setup menu) 95
TV Audio Input (HDMI Control, Setup menu) 90
TV connection 21
TV connection (ARC-compatible TV) 21
TV connection (HDMI Control-compatible TV) 23
TV connection (TV with HDMI input jacks) 24
TV connection (TV without HDMI input jacks) 25
TV FORMAT (ADVANCED SETUP menu) 100
TV Format (System, Information menu) 98
TV operation (remote control) 102
TV operation key (remote control) 11
U
Unable to play (error indication) 113
UPDATE (ADVANCED SETUP menu) 100
USB jack 8
USB mass storage class device 57
USB Overloaded (error indication) 113
USB storage device connection 57
USB storage device content playback 57
User Cancel (YPAO error message) 38
APPENDIX
➤ Index
En
128
V
VERSION (ADVANCED SETUP menu) 101
Version error (error indication) 113
Video (Setup menu) 89
VIDEO AUX jack 8
Video device connection 26
VIDEO jack 20
Video Mode (Option menu) 74
Video Mode (Video, Setup menu) 89
Video Out (Input menu) 77
Video pin cable 20
Video Signal (Information menu) 98
Video signal flow 118
Video signal type setting 100
Video/audio input jack combination 27
Virtual CINEMA DSP 43
Virtual Presence Speaker (VPS) 7
Volume Interlock (Input menu) 77
Volume Trim (Option menu) 74
VPS (Virtual Presence Speaker) 7
W
Wallpaper (Display Set, Setup menu) 95
Wiring (YPAO measurement result) 37
Y
Yamaha Parametric room
Acoustic Optimizer (YPAO) 35
YPAO
(Yamaha Parametric room Acoustic Optimizer
YPAO error message 38
YPAO MIC jack 8
YPAO microphone 35
YPAO warning message 39
35
Z
Zone Rename (Main Zone Set, Setup menu) 93
Zone Rename (Zone2 Set, Setup menu) 94
Zone2 Set (Multi Zone, Setup menu) 94
Zone2 speaker connection 68
APPENDIX
➤ Index
En
129
© 2013 Yamaha Corporation YF237A0/EN