Sharp IG-A40E Specifications

Générateur d’ions Plasmacluster
MODE D’EMPLOI
IG-A20E
Plasmacluster Ion Generator
BEDIENINGSHANDLEIDING
Ионный генератор Plasmacluster
РУКОВОДСТВО ПО
ЭКСПЛУАТАЦИИ
IG-A40E
SHARP CORPORATION
Osaka, Japan
日本語
ENGLISH
この取扱説明書をよくお読みのうえ、
正しくお使いください。
Read and keep this manual carefully.
Bitte lesen Sie diese Anleitung und
bewahren Sie sie auf.
Veuillez lire et enregistrer ces instructions.
Lees en bewaar deze instructies.
Прочтите данное руководство и
сохраните его.
Printed in Japan
TINS-A390KKRZ 09JK JP
A20E.Jan.indd 1
DEUTSCH
Plasmacluster-Ionen-Generator
BEDIENUNGSANLEITUNG
FRANÇAIS
IG-A20E
IG-A40E
NEDERLANDS
Plasmacluster is a trademark of SHARP Corporation.
Plasmacluster Ion Generator
OPERATION MANUAL
РУССКИЙ
プラズマクラスターイオン発生機
取扱説明書
1
09.9.24 11:35:29 AM
ENGLISH
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS .................. E-2
• WARNING ............................................................................ E-2
• CAUTIONS CONCERNING OPERATION ........................... E-2
• INSTALLATION GUIDELINES ............................................. E-2
CLEANING AND MAINTENANCE................................. E-7
• MAIN UNIT ........................................................................... E-7
• FILTER ................................................................................. E-7
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT ... E-8
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT ... E-9
SPECIFICATIONS ........................................................... E-11
TROUBLESHOOTING .................................................... E-12
• While IG-A20E and IG-A40E can inactivate suspended viruses and
other contaminants, it cannot create a completely sterile environment. SHARP does not guarantee its ability to prevent microbial infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-A20E and IG-A40E
have to be replaced periodically*.
DEUTSCH
OPERATION ....................................................................... E-6
FRANÇAIS
HOW TO INSTALL THE UNIT ........................................ E-5
NEDERLANDS
ACCESSORIES.................................................................. E-4
РУССКИЙ
• CONTROL PANEL ............................................................... E-3
• FIX THE OPERATION COVER BY SCREW ....................... E-3
INSTALLATION POSITION ............................................. E-4
ENGLISH
PARTS NAME ......................................................... E-3
* Replacement is required approximately every 2 years (17,500 hours) when operated
24 hours a day. IG-A20E and IG-A40E will stop operating after about 26 months
(19,000 hours) if the Plasmacluster Ion Generating Unit is not replaced.
Thank you for purchasing this SHARP Plasmacluster Ion Generator. Please
read this manual carefully before using Plasmacluster Ion Generator.
After reading, keep the manual in a convenient location for future reference.
E-1
IG-A20E_A40E.en.indd 3
2009/09/17 13:39:03
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic safety precautions should be followed, including the following:
WARNING - To reduce the risk of electric shock, fire, or injury :
• Read all instructions before using the unit.
• Use only a 220-240 volt outlet.
• DO NOT use the unit if the power cord or plug is damaged, or the connection to the wall outlet is
loosened.
• Periodically remove dust from the plug.
• DO NOT insert fingers or foreign objects into the air intake or air outlet.
• Always hold the plug and never pull on the cord when removing the power plug.
Electric shock and/or fire from a short circuit may result.
• DO NOT remove the plug when your hands are wet.
• DO NOT use the unit near gas appliances or fireplaces.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent, a Sharp
authorized Service Center or qualified person in order to avoid a hazard.
• Be cautious when cleaning the unit.
Strong corrosive cleansers may damage the exterior.
• DO NOT use it in the areas where the unit may get wet.
• DO NOT use spray products near the unit.
• DO NOT use in the rooms, containing oil component, incense, cigarettes’ sparks, and chemical
fumes.
• DO NOT operate when using aerosol insecticides or in rooms where there is oily residue, incense,
sparks from lit cigarettes, chemical fumes in the air, or in locations where the unit may get wet,
such as bathroom.
• DO NOT use these silicone-containing products in the room where the unit is installed.
• Only a Sharp authorized Service Center should service this Plasmacluster Ion Generator.
Contact the nearest Service Center for any problems, adjustments, or repairs.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not ride on the main unit and do not sit on or lean it, it may cause injury or malfunction.
CAUTIONS CONCERNING OPERATION:
• DO NOT block the air intake and/or air outlet.
• DO NOT use the unit near or on hot objects, such as stoves or heaters or where it may come into
contact with steam.
• Always operate the main unit in an upright position. Always unplug the unit before cleaning.
• Clean the exterior with a soft cloth only, otherwise the main unit surface may be damaged or
cracked.
• Keep the main unit away from water.
INSTALLATION GUIDELINES:
• Place at least 2m away from equipment utilizing electric waves such as televisions or radios to
avoid electrical interference when using the unit.
• Avoid using in locations where the unit is exposed to condensation or drastic temperature changes.
Appropriate room temperature is between 0-35ºC.
• Avoid locations where grease or oily smoke is generated, otherwise the main unit surface may
crack as a result.
NOTE - Radio or TV Interference:
If this Plasmacluster Ion Generator may cause interference to radio or television reception,
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the unit and radio/TV receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
E-2
IG-A20E_A40E.en.indd 4
2009/09/17 13:39:03
PARTS NAME
Louvers
(Air outlet of Plasmacluster Ion)
High density Plasmacluster Ion is discharged
forward. (Do not put anything in front of the unit.)
Plasmacluster Ion Generating Unit
Filter (Air Intake)
CONTROL PANEL
DEUTSCH
* Clean the filter periodically.
* Do not block the air intake or do not put
anything into the unit.
Plug
FRANÇAIS
FILTER CLEAN Light (yellow)
UNIT REPLACEMENT Light (red)
HIGH Fan Speed
MED Indicator (blue)
LOW
OPERATION Button
UNIT RESET Button
FILTER RESET Button
After cleaning the filter, plug the power cord and
press the FILTER RESET button for 3 seconds.
AUTO RESTART Switch
FIX THE OPERATION COVER BY SCREW
РУССКИЙ
Press this button for 3 seconds after replacing
the Plasmacluster Ion Gennerating Unit.
Don't press it for any other purposes.
NEDERLANDS
Power cord
ENGLISH
(Inside)
Please open the cover only when replacing the
Plasmacluster Ion Generating Unit.
(See page E-9)
If necessary, operation cover can be fixed by accessary screw.
rubber cover
washer
screw
E-3
IG-A20E_A40E.en.indd 5
2009/09/17 13:39:03
INSTALLATION POSITION
Place the main unit on a smooth, stable surface in a room, and insert the plug into an outlet.
Please note the required clearance.
UPSIDE more than 60cm
BACKSIDE more than 6cm
SIDE more than 60cm
SIDE more than 60cm
Installation Guidance
• To secure the performance, do not put anything in front of the unit.
• To secure the performance, do not block the air intake or do not put anything into the unit.
• If necessary, unit is fixed to the wall using accessary parts or fixed by anchor bolt see page E-5.
DO NOT USE the below items near the unit.
silicone-containing products*
SPRAY
WAX
PESTICIDES
* Hair care products, cosmetic
products, water proof sprays,
polish glass cleaner, wipe and
wax.
ACCESSORIES
• Operation manual
• Tip-resistant kit
• Screw kit
Tip-resistant kit
Screw kit for operation cover
(In case of fixing the main unit to the wall)
mounting parts for wall
(2pcs)
screw for the
main unit (2pcs)
screw (1pc)
rubber cover (1pc)
washer (1pc)
Anchor bolt, nut, and washer for fixing to the floor and screw for the wall for fixing to the wall are not included
as accessory parts.
E-4
IG-A20E_A40E.en.indd 6
2009/09/17 13:39:04
HOW TO INSTALL THE UNIT
1
Unscrew the painted screws
(2 pcs on each side ).
2
Lift up the Side Panel and remove
it outward.
3
In case of fixing the main unit to the floor by anchor bolts.
552mm(IG-A20E)
898mm(IG-A40E)
Put the main unit on the anchor
bolts and tighten surely with washer
and nut.
* The height of the anchor
bolt is 25mm or less.
* Size of anchor bolt
diameter is 8mm or less.
anchor bolts
nut
DEUTSCH
over
180mm
wall
FRANÇAIS
Measure the position of the anchor
bolts and fix them to the floor.
ENGLISH
Side Panel
anchor bolt
left side of rear
screw
screw
28mm
Fix the mounting parts to the main unit
by screws. (Right and left side)
The mounting parts and screws are
accessory parts. (Each 2 pcs)
mounting part(right)
mounting part(left)
wall side
Screws are to be surely tightened.
* Depending on the material of the wall, it may
not be able to tighten.
4
28mm
РУССКИЙ
right side of rear
In case of fixing the main unit to the
wall with the mounting parts.
NEDERLANDS
washer
Attach the Side Panel and screw
the painted screws on both sides.
E-5
IG-A20E_A40E.en.indd 7
2009/09/17 13:39:05
OPERATION
* This operation manual is based on IG-A40E.
The operation is same as IG-A20E.
Open the cover of Control Panel.
In case that the cover is fixed by a screw, take out the
rubber cover and a screw, and open the cover of control
panel.
Control
panel
Fix the cover of Control Panel.
As necessary, screw down the cover with the provided
screw and the washer and fit in the rubber cover.
(Please see Page E-3)
Press the Operation Button to select the preferred mode.
LOW
Release high-density
Plasmacluster ions quietly.
MED
Release high-density
Plasmacluster ions at medium fan
speed.
HIGH
Increase the volume of highdensity Plasmacluster ions to
increase the purifiying capacity.
Power 'OFF'
OPERATION BUTTON
AUTO RESTART
AUTO RESTART
Switch
If the AUTO RESTART switch is set to "ON"
and the unit is accidently unplugged, the
circuit breaker trips of there is a power failure,
the unit will automatically start operation at the
previous setting power is restored.
E-6
IG-A20E_A40E.en.indd 8
2009/09/17 13:39:07
CLEANING AND MAINTENANCE
WARNING:
When cleaning the unit, be sure to first unplug the power cord, and never handle the
plug with wet hands.
Electric shock and/or bodily injury may occur as a result.
Main Unit
ENGLISH
Every month or more often if necessary.
Wipe with a dry soft cloth.
FILTER CLEAN Light will be lit after approx. 1 month (approx. 720 hours), when operated 24 hours a
day.
Pull out the filter from bottom of the main unit and remove dust by using a vacuum cleaner or similar
tools.
Filter
IG-A20E Filter (1pc)
IG-A40E Filter (2pcs)
* A filter is not disposable item, often
clean the filter.
• When the filter is very dirty, please wash with water
or using mild kitchen detergent.
NEDERLANDS
Every 2 weeks or more often if necessary.
РУССКИЙ
FILTER
FRANÇAIS
DEUTSCH
<For Stubborn Dirt>
Use water and a mild detergent.
And then, wipe with a wet cloth.
Make sure to dry out .
CAUTION
• Do not rub with a hard sponge and do not bend it
when washing.
• Avoid drying filters outdoors under sunlight or using
near a stove.
FILTER RESET Button
After cleaning, insert the plug and press RESET
Button for 3 seconds.
E-7
IG-A20E_A40E.en.indd 9
2009/09/17 13:39:08
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
In order to release Plasmacluster Ion stably, periodical replacement of Plasmacluster
Ion Generating Unit is necessary. The Unit Replacement Light will be ON as a reminder
for replacement.
Display
Elapsed Time
Beginning to use.
Approx. 2 years.
flashing (red)
Message
Lighting(blue)
Operate normally
Lighting(blue)
Suggest replacing
Plasmacluster Ion
Generating Unit.
(approx. 17,500hours)
Approx. 2 years and
• Unit has stopped
working.
•R e p l a c e t h e
Plasmacluster Ion
Generating Unit.
flashing faster (red)
2 months.
(approx.19,000hours)
Plasmacluster Ions
flashing (red)
flashing (blue)
Error*
are not released.
* Usage environment affects the lifetime of the Plasmacluster Ion Generator.
The Plasmacluster Ion Generator may stop working before estimated lifetime.
In this case, press Operation Button again and restart.
If this does not help, replace with a new Plasmacluster Ion Generating Unit.
Plasmacluster Ion Generating Unit for Replacement
Plasmacluster Ion Generating Unit
Model
Number
IZ-CA40E (for IG-A40E)
IZ-CA20E (for IG-A20E)
<For Disposal>
Please dispose the used Plasmacluster Ion
Generating Unit according to any local laws and
regulations.
-materials• Case: Acrylonitrile Butadiene Styrene (ABS)
• Unit: Polybuthylene Terephthalate (PBT), Electric
parts.
E-8
IG-A20E_A40E.en.indd 10
2009/09/17 13:39:09
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
* When replacing the Plasmacluster Ion Generating Unit, be sure to turn off the main
unit, unplug the power cord, and never handle the plug with wet hands.
DEUTSCH
ENGLISH
1
Remove the rubber cover and unscrew
the center screw of the Ion Generator
Cover.
FRANÇAIS
rubber cover
NEDERLANDS
(IG-A40E only)
РУССКИЙ
2
Push the both corner of Ion Generator
Cover and open it.
Ion Generator Cover
(see next page)
E-9
IG-A20E_A40E.en.indd 11
2009/09/17 13:39:09
HOW TO REPLACE THE PLASMACLUSTER ION GENERATING UNIT
3
Pull up the lever in the direction of
the arrow to unlock it.
Pull up the lever
Unit
Pull the lever in the direction
of the arrow and take out the
Plasmacluster Ion Generating Unit.
Remove the connector cover.
(IG-A40E only : 4 pcs)
Disconnect the connector of
Plasmacluster Ion Generating Unit.
Push and unlock the
connector, take out the
connector in the direction
of the arrow.
IG-A20E
Plasmacluster Ion Generating Unit without sensor.
IG-A20E : 1pc
IG-A40E : 3pcs
without sensor (1pc)
with sensor (1pc)
Plasmacluster Ion Generating Unit with sensor.
IG-A20E : 1pc
IG-A40E : 1pc
IG-A40E
without sensor (3pcs)
with sensor (1pc)
Reset button for Plasmacluster Ion Generating Unit
After replacing the Plasmacluster Ion Generating Unit, insert the plug and
press the UNIT RESET Button for 3 seconds.
E-10
IG-A20E_A40E.en.indd 12
2009/09/17 13:39:10
SPECIFICATIONS
*1 The target floor surface area for which an emitted airborne ion density of about 25,000
ions/cm3 can be measured at a point near the center of the room (at a height of about 1.2m
from the floor), during operation at the HIGH mode when the main unit is placed near a
wall.
*2 Ions, counted per cm3, blown into air near the center of the room (at a height of approx.
1.2m from the floor) during operation at each airstream setting when the main unit is
placed near the wall.
• The number of ions will vary according to the room conditions and operation mode.
Standby Power
РУССКИЙ
In order to operate the electrical circuits while the power plug is inserted in the wall
outlet, this product consumes about 0.8W of standby power.
For energy conservation, unplug the power cord when the unit is not in use.
DEUTSCH
15.0
FRANÇAIS
10.5
NEDERLANDS
Weight (kg)
ENGLISH
IG-A20E
IG-A40E
Model
Power supply
220-240V, 50/60Hz
Fan speed
HIGH
MED.
LOW
HIGH
MED.
LOW
9
10
14
39
22
20
Power consumption (W)
45
40
47
Operating noise level (dBA)
34
40
34
3
468
390
840
648
510
306
Airflow volume (m /hour)
1
50
23
Applicable floor surface area (m2) *
7,000
12,000
25,000
25,000 12,000
7,000
Ion density (ions/cm3) *2
2.0
Power cord (m)
940(W) 480(H) 230(D)
594(W) 480(H) 230(D)
Outer dimensions (mm)
E-11
IG-A20E_A40E.en.indd 13
2009/09/17 13:39:12
TROUBLESHOOTING
Before calling for service, please review the TROUBLESHOOTING chart below.
Since the problem may not be unit malfunction.
Problem
WHAT TO DO
The Plasmacluster Ion Generator does
not work.
Make sure to put in the plug.
Approx. 2 years and 2 month (Approx
19,000 hours) has been passed.
Replace with a new Plasmacluster Ion
Generating Unit. See page E-8,9,10.
flashing faster (red)
Plasmacluster Ions are not released.
Press the Operation Button and restart.
flashing (red) flashing (blue)
If all lights keep flashing, replace with new
Plasmacluster Ion Generating Unit. See page E-8,9,10.
• Dust may block the filter, clean the filter.
Failure
Unplug and ask the store you purchased or
Sharp Sevice Center.
flashing (blue)
flashing (blue)
The discharged air has odor.
The Plasmacluster Ion Generator releases
a small trace of ozone which may produce
odor. This is not detrimental to health.
A clicking or ticking sound comes from the
unit while operating the Plasmacluster Ion
Generator.
Loudness can be changed depending on
a room humidity, but the effectiveness is
the same. Relocate the Plasmacluster Ion
Generator if necessary.
Lighting (yellow)
A discontinuous noise is heard.
The air flow decreases.
Filter cleaning time. See page E-7. After
cleaning the filter, press FILTER RESET
Button for 3 seconds.
Filter is getting dirty.
Clean the filter.
After cleaning the filter, press FILTER
RESET Button for 3 seconds.
E-12
IG-A20E_A40E.en.indd 14
2009/09/17 15:29:07
A. Information on Disposal for Users (private households)
1. In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust
bin!
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please
dispose of these separately beforehand according to local requirements.
ENGLISH
Attention: Your product is
marked with this symbol. It
means that used electrical
and electronic products
should not be mixed with
general household waste.
There is a separate
collection system for these
products.
Used electrical and electronic equipment must be treated separately and in
accordance with legislation that requires proper treatment, recovery and recycling of
used electrical and electronic equipment.
Following the implementation by member states, private households within the EU
states may return their used electrical and electronic equipment to designated
collection facilities free of charge*. In some countries* your local retailer may also
take back your old product free of charge if you purchase a similar new one.
DEUTSCH
By disposing of this product correctly you will help ensure that the waste undergoes
the necessary treatment, recovery and recycling and thus prevent potential negative
effects on the environment and human health which could otherwise arise due to
inappropriate waste handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the
correct method of disposal.
FRANÇAIS
For Switzerland: Used electrical or electronic equipment can be returned free of
charge to the dealer, even if you don’t purchase a new product. Further collection
facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B. Information on Disposal for Business Users.
1. In the European Union
If the product is used for business purposes and you want to discard it:
NEDERLANDS
Please contact your SHARP dealer who will inform you about the take-back of the
product. You might be charged for the costs arising from take-back and recycling.
Small products (and small amounts) might be taken back by your local collection
facilities.
For Spain: Please contact the established collection system or your local authority for
take-back of your used products.
РУССКИЙ
2. In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for
the correct method of disposal.
EN
IG-A20E_A40E.en.indd 15
2009/09/17 13:39:13