XL-UR2180H
MIKRO KOMPONENTEN SYSTEM
MICRO-CHAÎNE
SISTEMA MICRO COMPONENTE
MIKRO KOMPONENT SYSTEM
MICRO SISTEMI
MICRO SYSTEEM
SISTEMA DE MICRO COMPONENTE
MICRO COMPONENT SYSTEM
MODELL
MODÈLE
MODELO
MODELL
XL-UR2380H
MODELLO
MODEL
MODELO
MODEL
XL-UR2180H
XL-UR2380H
XL-UR2580H
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUAL DE MANEJO
BRUKSANVISNING
XL-UR2580H
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE OPERAÇÃO
OPERATION MANUAL
DEUTSCH
FRANÇAIS
Note:
This product is not compatible with MTP and AAC file systems.
Siehe Seiten i bis x und D-1 bis D-42.
Se reporter aux pages i à x et F-1 à F-42.
ESPAÑOL
Consulte las páginas i a x y S-1 a S-42.
SVENSKA
ITALIANO
Hänvisa till sidorna i till x och V-1 till V-42.
Leggere le pagine i a x e I-1 a I-42.
NEDERLANDS
PORTUGUÊS
ENGLISH
Raadpleeg de bladzijden i t/m x en N-1 t/m N-42.
Favor consultar as páginas i a x e P-1 a P-42.
Please refer to pages i to x and E-1 to E-42.
XL-UR2180H
XL-UR2380H
XL-UR2580H
BESONDERE ANMERKUNGEN
REMARQUES SPÉCIALES
NOTAS ESPECIALES
SÄRSKILDA ANMÄRKNINGAR
NOTE PARTICOLARI
BIJZONDERE OPMERKINGEN
NOTAS ESPECIAIS
SPECIAL NOTES
Dichiarazione di conformità
La società SHARP ELECTRONICS EUROPE GmbH dichiara
che il prodotto SHARP MICRO SISTEMI XL-UR2180H/
XL-UR2380H/XL-UR2580H è costruito in conformità alle
prescrizioni del D.M.no.548 del 28/8/95, pubblicato sulla
G.U.no.301 del 28/12/95 ed in particolare è conforme a
quanto indicato nell’art. 2, comma 1 dello stesso decreto.
Bei Einstellung der ON/STAND-BY-Taste auf STAND-BY ist
die Netzspannung immer noch im Gerät vorhanden.
Wenn die ON/STAND-BY-Taste auf STAND-BY eingestellt
wird, kann das Gerät unter Verwendung der Timer-Betriebsart
oder Fernbedienung in Betrieb gesetzt werden.
Warnung:
In diesem Gerät sind keine vom Benutzer wartbaren Teile
vorhanden. Niemals Abdeckungen entfernen, außer wenn Sie
dafür qualifiziert sind. In diesem Gerät sind gefährliche
Spannungen vorhanden. Vor Ausführung von irgendwelchen
Kundendienstarbeiten oder bei längerer Nichtverwendung des
Gerätes stets den Netzstecker aus der Netzsteckdose ziehen.
Lorsque la touche ON/STAND-BY est mise en STAND-BY,
l’appareil est toujours sous tension.
Lorsque la touche ON/STAND-BY se trouve sur la position
STAND-BY, l’appareil est prêt à fonctionner par la minuterie
ou la télécommande.
Avertissement:
Cet appareil contient des pièces non réparables par
l’utilisateur. Personne non qualifiée n’enlèvera jamais les
couvercles. L’appareil contenant des organes portés à haute
tension, débrancher l’appareil avant toute réparation ou en
période de non-utilisation.
● Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, todavía hay tensión dentro del aparato.
Cuando el botón ON/STAND-BY está puesto en la posición
STAND-BY, el aparato puede ponerse en funcionamiento
utilizando el modo del temporizador o el controlador remoto.
Advertencia:
Tenga en cuenta que dentro de este aparato no hay piezas que
pueda reparar. No quite nunca las tapas a menos que se esté
cualificado para hacerlo. Este aparato tiene en su interior
tensiones peligrosas.
Desenchufe siempre la clavija de la red del tomacorriente antes
de realizar cualquier servicio de mantenimiento y cuando no se
use el aparato durante un largo período de tiempo.
● När ON/STAND-BY knappen är i läge STAND-BY, finns
nätspänning i apparaten.
Med ON/STAND-BY knappen i läge STAND-BY kan apparaten
startas med timerfunktion eller fjärrkontrollen.
Varning:
Apparaten innehåller inga delar som kan åtgärdas av kunden.
Höljet får endast öppnas av kvalificerad personal. Apparaten
innehåller farliga spänningar.
Stickkontakten ska därför dras ut från nätuttaget före
reparationsarbeten och bör dras ut om apparaten inte ska
användas på mycket länge.
● Quando il tasto ON/STAND-BY si trova in posizione STANDBY, all’interno dell’apparecchio c’è ancora la corrente.
Se il tasto ON/STAND-BY si trova nella posizione STANDBY, l’unità può essere accesa con il modo timer o con il
telecomando.
Avvertenza:
L’apparecchio non contiene parti riparabili dall’utente.
Non togliere mai i coperchi, a meno di non essere qualificati
per farlo. All’interno dell’apparecchio ci sono tensioni
pericolose, per cui si deve sempre staccare la spina del cavo
d’alimentazione dalla presa di corrente prima di qualsiasi
intervento di manutenzione e quando non si usa l’apparecchio
per un lungo periodo di tempo.
i
03/12/16
G Wanneer de ON/STAND-BY toets in de STAND-BY stand staat,
loopt er nog steeds stroom (netspanning) in het toestel.
Wanneer de ON/STAND-BY toets in de STAND-BY stand staat, kan
het toestel ingeschakeld worden via de timerfunctie of de
afstandsbediening.
Waarschuwing:
Dit toestel bevat geen door de gebruiker te repareren onderdelen.
Verwijder de behuizing nooit tenzij u deskundig bent op dit gebied.
In het toestel loopt een gevaarlijke spanning; haal de stekker altijd
uit het stopcontact alvorens onderhoud uit te voeren of wanneer het
toestel voor langere tijd niet gebruikt wordt.
XL-UR2180H
XL-UR2380H
XL-UR2580H
DENNA APPARAT ÄR ANSLUTEN TILL 230 V VÄXELSTRÖM
NÄR STICKPROPPEN ÄR INSKJUTEN I VÄGGUTTAGET. FÖR
ATT FULLSTÄNDIGT KOPPLA IFRÅN APPARATEN, V.G. DRAG
UT STICKPROPPEN.
G Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, a voltagem de alimentação ainda se encontra
presente dentro do aparelho.
Quando o botão ON/STAND-BY estiver ajustado na posição
STAND-BY, o aparelho pode ser colocado em operação através
do modo de programação horária ou pelo controle remoto.
Advertência:
Neste aparelho não há partes que podem ser consertadas pelo
usuário. Nunca retire a tampa, a menos que você tenha
qualificação para tal. Este aparelho contém voltagens perigosas.
Remova sempre o cabo de alimentação da tomada
antes de efetuar qualquer conserto ou quando deixar o aparelho
muito tempo fora de uso.
G Audio-visuelles Material kann Urheberrechte umfassen, die ohne
Genehmigung des Eigentümers dieser Urheberrechte nicht
aufgenommen werden dürfen. Siehe die entsprechenden nationalen
Gesetze.
G When the ON/STAND-BY button is set at STAND-BY position, mains
voltage is still present inside the unit.
When the ON/STAND-BY button is set at STAND-BY position, the unit
may be brought into operation by the timer mode or remote control.
Warning:
This unit contains no user serviceable parts. Never remove covers
unless qualified to do so. This unit contains dangerous voltages,
always remove mains plug from the socket before any service
operation and when not in use for a long period.
G Audiovisuellt material kan innehålla upphovsrättsarbete som inte skall
mångfaldigas utan tillstånd av copyrightinnehavaren. Se den
tillämpliga lagen i ditt land.
G Når ON/STAND-BY-knappen er sat i STAND-BY positionen, er der
stadig netspaending til stede i apparatet.
Når ON/STAND-BY-knappen er sat i STAND-BY position, kan
apparatet startes v.hj.a. timer-funksionen eller fjernbetjeningen.
Advarsel:
Apparatet indeholder ingen dele, der kan repareres af brugeren
selv. Fjern aldrig kabinettet med mindre De er kvalificeret hertil.
Apparatet indeholder farlig strømspaending. Traek altid stikket ud
af stikkontakten før der foretages reparationer, eller hvis apparatet
ikke er i brug i laengere tid.
G Le matériel audio-visuel peut comporter des oeuvres faisant l’objet de
droits d’auteur qui ne peuvent être enregistrées sans l’autorisation du
possesseur du droit d’auteur, veuillez vous référer aux
réglementations nationales en vigueur.
G El material audiovisual puede consistir en trabajos que tengan
derechos de autor y que no deben grabarse sin la autorización del
poseedor de dichos derechos de autor. Sírvase consultar las leyes
aplicables en su país.
G Il materiale audio-visivo che fosse soggetto a copyright non può
essere registrato senza l’autorizzazione del possessore del copyright.
Si prega di attenersi alle leggi in vigore sul territorio nazionale.
G Audio-visueel materiaal kan worden beschermd door auteursrechten,
in welk geval het niet mag worden opgenomen zonder de
toestemming van de auteursrechthouder. Zie voor nadere informatie
de betreffende wetten in het land van gebruik.
G O material audiovisual pode consistir de trabalhos de direitos autorias
que não devem ser gravados sem autorização do proprietário dos
direitos. Favor consultar as leis vigentes em seu país.
G Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Please refer to relevant law in your country.
03/12/16
ii
XL-UR2180H
XL-UR2380H
XL-UR2580H
● Vorsicht:
Das Gerät weder Tropf- noch Spritzwasser aussetzen. Ansonsten
besteht die Gefahr eines Brandes oder elektrischen Schlages. Es
dürfen keine mit Flüssigkeiten gefüllten Gegenstände wie Vasen auf
dem Gerät abgestellt werden.
● Advarsel:
Til at forbygge ild og stød risiko, lad vaere med at undsaette denne
indretning for drypning eller overstaenkning. Der må ikke anbringes
nogen genstande fyldt med vand, som for eksempel vaser, på dette
apparat.
● Attention:
Pour éviter un incendie ou une secousse électrique, mettre l’appareil
à l’abri de l’eau (éclaboussure, goutte). Ne pas poser sur l’appareil un
récipient contenant du liquide.
● Advarsel:
For å unngå brann eller kortslutning, utsett ikke produktet for vann
eller fuktighet. Gjenstander som inneholder vaeske, feks. en
blomstervase, må ikke plasseres oppå apparatet.
● Advertencia:
Para evitar incendios y descargas eléctricas, no exponga el aparato
a goteo o salpicadura de líquidos. No deberán ponerse encima del
aparato objetos que estén llenos de líquido, como por ejemplo un
florero.
● Varoitus:
Älä vie laitetta sateeseen tai kosteisiin tiloihin. Jos laite on kostunut,
anna sen kuivua ennen kuin käytät sitä verkkovirralla. Nestettä
sisältäviä astioita kuten esim. kukkamaljakoita ei saa asettaa laitteen
päälle.
● Varning:
Utsätt inte enheten för dropp eller stänk för att förhindra brand eller
elektriska stötar. Inga vätskefyllda föremål såsom vaser får
placeras på enheten.
● Attenzione:
Per prevenire incendi o scosse elettriche, non fare gocciolare
nessun liquido sull’apparecchio e non bagnarlo. Non collocarvi
sopra nessun oggetto riempito d’acqua, come per esempio vasi.
● Dieses Produkt ist ein Laserprodukt der Klasse 1.
● Waarschuwing:
Stel het toestel niet bloot aan druipend of spattend water om brand
en elektrische schokken te voorkomen. Met vloeistoffen gevulde
voorwerpen, zoals vazen, mogen niet op het toestel geplaatst
worden.
● Ce produit est classifié comme étant un LASER DE CLASSE 1.
● Cuidado:
Para evitar incêndio ou choque elétrico, não exponha este
aparelho a gotejamento ou salpicamento de água. Não coloque
objetos com água como, por exemplo, um vaso de flores, em cima
do aparelho.
● Questo prodotto è classificato come CLASS 1 LASER PRODUCT.
● Este producto está clasificado como un PRODUCTO LÁSER DE
CLASE 1.
● Denna produkt klassificeras som KLASS 1 LASERPRODUKT.
● Dit product is geclassificeerd als een KLASSE 1 LASER PRODUCT.
● This product is classified as a CLASS 1 LASER PRODUCT.
● Warning:
To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
iii
03/12/16
G Este produto é classificado como PRODUTO LASER DE CLASSE 1.
XL-UR2180H
XL-UR2380H
XL-UR2580H
G Dette produktet er klassifisert som et KLASSE 1 LASERPRODUKT.
G Dette produkt er klassificeret som et KLASSE 1 LASERPRODUKT.
G Tämä laite on luokiteltu LUOKAN 1 LASERLAITTEEKSI.
G Denna produkt klassificeras som KLASS 1 LASERAPPARAT.
G
G
iv
03/12/16
XL-UR2180H
XL-UR2380H
XL-UR2580H
Entsorgungsinformationen
Informations sur la mise au rebut correcte
A. Entsorgungsinformationen für Benutzer aus
Privathaushalten
A. Informations sur la mise au rebut à l'intention
des utilisateurs privés (ménages)
1. In der Europäischen Union
Achtung: Werfen Sie dieses Gerät zur Entsorgung bitte
nicht in den normalen Hausmüll!
Gemäß einer neuen EU-Richtlinie, die die ordnungsgemäße
Rücknahme, Behandlung und Verwertung von gebrauchten
Elektro- und Elektronikgeräten vorschreibt, müssen
elektrische und elektronische Altgeräte getrennt entsorgt
werden.
Nach der Einführung der Richtlinie in den EU-Mitgliedstaaten
können Privathaushalte ihre gebrauchten Elektro- und
Elektronikgeräte nun kostenlos an ausgewiesenen
Rücknahmestellen abgeben*.
In einigen Ländern* können Sie Altgeräte u.U. auch
kostenlos bei Ihrem Fachhändler abgeben, wenn Sie ein
vergleichbares neues Gerät kaufen.
*) Weitere Einzelheiten erhalten Sie von Ihrer
Gemeindeverwaltung.
Wenn Ihre gebrauchten Elektro- und Elektronikgeräte
Batterien oder Akkus enthalten, sollten diese vorher
entnommen und gemäß örtlich geltenden Regelungen
getrennt entsorgt werden.
Durch die ordnungsgemäße Entsorgung tragen Sie dazu
bei, dass Altgeräte angemessen gesammelt, behandelt
und verwendet werden. Dies verhindert mögliche
schädliche Auswirkungen auf Umwelt und Gesundheit
durch eine unsachgemäße Entsorgung.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung
nach dem ordnungsgemäßen Verfahren zur Entsorgung
dieses Geräts.
Für die Schweiz: Gebrauchte Elektro- und Elektronikgeräte
können kostenlos beim Händler abgegeben werden, auch
wenn Sie kein neues Produkt kaufen. Weitere
Rücknahmesysteme finden Sie auf der Homepage von
www.swico.ch oder www.sens.ch.
1. Au sein de l'Union européenne
Attention : si vous souhaitez mettre cet appareil au rebut,
ne le jetez pas dans une poubelle ordinaire!
Les appareils électriques et électroniques usagés doivent
être traités séparément et conformément aux lois en
vigueur en matière de traitement, de récupération et de
recyclage adéquats de ces appareils.
Suite à la mise en oeuvre de ces dispositions dans les
Etats membres, les ménages résidant au sein de l'Union
européenne peuvent désormais ramener gratuitement*
leurs appareils électriques et électroniques usagés sur
des sites de collecte désignés.
Dans certains pays*, votre détaillant reprendra également
gratuitement votre ancien produit si vous achetez un
produit neuf similaire.
*)Veuillez contacter votre administration locale pour plus
de renseignements.
Si votre appareil électrique ou électronique usagé
comporte des piles ou des accumulateurs, veuillez les
mettre séparément et préalablement au rebut
conformément à la législation locale en vigueur.
En veillant à la mise au rebut correcte de ce produit, vous
contribuerez à assurer le traitement, la récupération et le
recyclage nécessaires de ces déchets, et préviendrez
ainsi les effets néfastes potentiels de leur mauvaise
gestion sur l'environnement et la santé humaine.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez
contacter votre administration locale qui vous renseignera
sur la méthode d'élimination correcte de cet appareil.
Suisse : les équipements électriques ou électroniques
usagés peuvent être ramenés gratuitement au détaillant,
même si vous n'achetez pas un nouvel appareil. Pour obtenir
la liste des autres sites de collecte, veuillez vous reporter à la
page d'accueil du site www.swico.ch ou www.sens.ch.
B. Entsorgungsinformationen für gewerbliche
Nutzer
B. Informations sur la mise au rebut à l'intention
des entreprises
1. In der Europäischen Union
Wenn Sie dieses Produkt für gewerbliche Zwecke genutzt
haben und nun entsorgen möchten:
Bitte wenden Sie sich an Ihren SHARP Fachhändler, der
Sie über die Rücknahme des Produkts informieren kann.
Möglicherweise müssen Sie die Kosten für die
Rücknahme und Verwertung tragen. Kleine Produkte
(und kleine Mengen) können möglicherweise bei Ihrer
örtlichen Rücknahmestelle abgegeben werden.
Für Spanien: Bitte wenden Sie sich an das vorhandene
Rücknahmesystem oder Ihre Gemeindeverwaltung, wenn
Sie Fragen zur Rücknahme Ihrer Altgeräte haben.
2. In anderen Ländern außerhalb der EU
Bitte erkundigen Sie sich bei Ihrer Gemeindeverwaltung
nach dem ordnungsgemäßen Verfahren zur Entsorgung
dieses Geräts.
1. Au sein de l'Union européenne
Si ce produit est utilisé dans le cadre des activités de votre
entreprise et que vous souhaitiez le mettre au rebut :
Veuillez contacter votre revendeur SHARP qui vous
informera des conditions de reprise du produit. Les frais de
reprise et de recyclage pourront vous être facturés. Les
produits de petite taille (et en petites quantités) pourront
être repris par vos organisations de collecte locales.
Espagne : veuillez contacter l'organisation de collecte
existante ou votre administration locale pour les
modalités de reprise de vos produits usagés.
2. Pays hors de l'Union européenne
Si vous souhaitez mettre ce produit au rebut, veuillez
contacter votre administration locale qui vous renseignera
sur la méthode d'élimination correcte de cet appareil.
v
03/12/16
Información sobre la eliminación
Information om återvinning
A. Información sobre eliminación para
usuarios particulares
XL-UR2180H
XL-UR2380H
XL-UR2580H
A. Information om återvinning av elektrisk
utrustning för hushåll
1. En la Unión Europea
Atención: si quiere desechar este equipo, ¡por favor no
utilice el cubo de la basura habitual!
Los equipos eléctricos y electrónicos usados deberían
tratarse por separado de acuerdo con la legislación que
requiere un tratamiento, una recuperación y un reciclaje
adecuados de los equipos eléctricos y electrónicos usados.
Tras la puesta en práctica por parte de los estados
miembros, los hogares de particulares dentro de los
estados de la Unión Europea pueden devolver sus
equipos eléctricos y electrónicos a los centros de
recogida designados sin coste alguno *.
En algunos países* es posible que también su vendedor
local se lleve su viejo producto sin coste alguno si Ud.
compra uno nuevo similar.
*) Por favor, póngase en contacto con su autoridad local
para obtener más detalles.
Si sus equipos eléctricos o electrónicos usados tienen
pilas o acumuladores, por favor deséchelos por separado
con antelación según los requisitos locales.
Al desechar este producto correctamente, ayudará a
asegurar que los residuos reciban el tratamiento, la
recuperación y el reciclaje necesarios, previniendo de esta
forma posibles efectos negativos en el medio ambiente y
la salud humana que de otra forma podrían producirse
debido a una manipulación de residuos inapropiada.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en
contacto con las autoridades locales y pregunte por el
método de eliminación correcto.
Para Suiza: Los equipos eléctricos o electrónicos pueden
devolverse al vendedor sin coste alguno, incluso si no
compra ningún nuevo producto. Se puede encontrar una
lista de otros centros de recogida en la página principal
de www.swico.ch o www.sens.ch.
1. EU-länder
OBS! Kasta inte denna produkt i soporna!
Förbrukad elektrisk utrustning måste hanteras i enlighet
med gällande miljölagstiftning och återvinningsföreskrifter.
I enlighet med gällande EU-regler ska hushåll ha
möjlighet att lämna in elektrisk utrustning till
återvinningsstationer utan kostnad.* I vissa länder* kan
det även hända att man gratis kan lämna in gamla
produkter till återförsäljaren när man köper en ny
liknande enhet.
*) Kontakta kommunen för vidare information.
Om utrustningen innehåller batterier eller ackumulatorer
ska dessa först avlägsnas och hanteras separat i enlighet
med gällande miljöföreskrifter.
Genom att hantera produkten i enlighet med dessa
föreskrifter kommer den att tas om hand och återvinnas
på tillämpligt sätt, vilket förhindrar potentiella negativa
hälso- och miljöeffekter.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på
gällande sorterings- och återvinningsföreskrifter om du
behöver göra dig av med denna produkt.
B. Information om återvinning för företag
1. EU-länder
Gör så här om produkten ska kasseras:
Kontakta SHARPs återförsäljare för information om hur
man går till väga för att lämna tillbaka produkten. Det kan
hända att en avgift för transport och återvinning
tillkommer. Mindre skrymmande produkter (om det rör sig
om ett fåtal) kan eventuellt återlämnas till lokala
återvinningsstationer.
2. Länder utanför EU
Kontakta de lokala myndigheterna och ta reda på
gällande sorterings- och återvinningsföreskrifter om du
behöver göra dig av med denna produkt.
B. Información sobre Eliminación para
empresas usuarias
1. En la Unión Europea
Si el producto se utiliza en una empresa y quiere desecharlo:
Por favor póngase en contacto con su distribuidor
SHARP, quien le informará sobre la recogida del
producto. Puede ser que le cobren los costes de
recogida y reciclaje. Puede ser que los productos de
tamaño pequeño (y las cantidades pequeñas) sean
recogidos por sus centros de recogida locales.
Para España: por favor, póngase en contacto con el
sistema de recogida establecido o con las autoridades
locales para la recogida de los productos usados.
2. En otros países fuera de la Unión Europea
Si desea desechar este producto, por favor póngase en
contacto con sus autoridades locales y pregunte por el
método de eliminación correcto.
vi
03/12/16
XL-UR2180H
XL-UR2380H
XL-UR2580H
Informazioni per un corretto smaltimento
Informatie over verantwoorde verwijdering
A. Informazioni sullo smaltimento per gli utenti
(privati)
A. Informatie over afvalverwijdering voor
gebruikers (particuliere huishoudens)
1. Nell'Unione europea
Attenzione: Per smaltire il presente dispositivo, non
utilizzare il normale bidone della spazzatura!
Le apparecchiature elettriche ed elettroniche usate
devono essere gestite a parte e in conformità alla
legislazione che richiede il trattamento, il recupero e il
riciclaggio adeguato dei suddetti prodotti.
In seguito alle disposizioni attuate dagli Stati membri, i
privati residenti nella UE possono conferire
gratuitamente le apparecchiature elettriche ed
elettroniche usate a centri di raccolta designati*.
In alcuni paesi*, anche il rivenditore locale può ritirare
gratuitamente il vecchio prodotto se l'utente acquista un
altro nuovo di tipologia simile.
*) Per maggiori informazioni si prega di contattare
l'autorità locale competente.
Se le apparecchiature elettriche o elettroniche usate
hanno batterie o accumulatori, l'utente dovrà smaltirli a
parte preventivamente in conformità alle disposizioni locali.
Lo smaltimento corretto del presente prodotto contribuirà
a garantire che i rifiuti siano sottoposti al trattamento, al
recupero e al riciclaggio necessari prevenendone il
potenziale impatto negativo sull'ambiente e sulla salute
umana, che potrebbe derivare da un'inadeguata gestione
dei rifiuti.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare
le autorità locali e informarsi sul metodo di smaltimento
corretto.
Per la Svizzera: Le apparecchiature elettriche o
elettroniche usate possono essere restituite
gratuitamente al rivenditore, anche se non si acquista un
prodotto nuovo. Altri centri di raccolta sono elencati sulle
homepage di www.swico.ch o di www.sens.ch.
1. In de Europese Unie
Let op: Deze apparatuur niet samen met het normale
huisafval weggooien!
Afgedankte elektrische en elektronische apparatuur moet
gescheiden worden ingezameld conform de wetgeving inzake
de verantwoorde verwerking, terugwinning en recycling van
afgedankte elektrische en elektronische apparatuur.
Na de invoering van de wet door de lidstaten mogen
particuliere huishoudens in de lidstaten van de Europese
Unie hun afgedankte elektrische en elektronische
apparatuur kosteloos* naar hiertoe aangewezen
inzamelingsinrichtingen brengen*.
In sommige landen* kunt u bij de aanschaf van een
nieuw apparaat het oude product kosteloos bij uw lokale
distributeur inleveren.
*) Neem contact op met de plaatselijke autoriteiten voor
verdere informatie.
Als uw elektrische of elektronische apparatuur batterijen
of accumulatoren bevat dan moet u deze afzonderlijk
conform de plaatselijke voorschriften weggooien.
Door dit product op een verantwoorde manier weg te
gooien, zorgt u ervoor dat het afval de juiste verwerking,
terugwinning en recycling ondergaat en potentiële
negatieve effecten op het milieu en de menselijke
gezondheid worden voorkomen die anders zouden
ontstaan door het verkeerd verwerken van het afval.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op
met de plaatselijke autoriteiten voor informatie omtrent
de juiste verwijderingsprocedure.
Voor Zwitserland: U kunt afgedankte elektrische en
elektronische apparatuur kosteloos bij de distributeur
inleveren, zelfs als u geen nieuw product koopt.
Aanvullende inzamelingsinrichtingen zijn vermeld op de
startpagina van www.swico.ch of www.sens.ch.
B. Informatie over afvalverwijdering voor
bedrijven
B. Informazioni sullo smaltimento per gli utenti
commerciali
1. In de Europese Unie
Als u het product voor zakelijke doeleinden heeft gebruikt
en als u dit wilt weggooien:
Neem contact op met uw SHARP distributeur die u
inlichtingen verschaft over de terugname van het product.
Het kan zijn dat u een afvalverwijderingsbijdrage voor de
terugname en recycling moet betalen. Kleine producten
(en kleine hoeveelheden) kunnen door de lokale
inzamelingsinrichtingen worden verwerkt.
Voor Spanje: Neem contact op met de inzamelingsinrichting
of de lokale autoriteiten voor de terugname van uw
afgedankte producten.
2. In andere landen buiten de Europese Unie
Als u dit product wilt weggooien, neem dan contact op
met de plaatselijke autoriteiten voor informatie omtrent
de juiste verwijderingsprocedure.
1. Nell'Unione europea
Se il prodotto è impiegato a scopi commerciali,
procedere come segue per eliminarlo.
Contattare il proprio rivenditore SHARP che fornirà
informazioni circa il ritiro del prodotto. Potrebbero essere
addebitate le spese di ritiro e riciclaggio. Prodotti piccoli
(e quantitativi ridotti) potranno essere ritirati anche dai
centri di raccolta locali.
Per la Spagna: Contattare il sistema di raccolta ufficiale o
l'ente locale preposto al ritiro dei prodotti usati.
2. In paesi che non fanno parte dell'UE
Se si desidera eliminare il presente prodotto, contattare
le autorità locali e informarsi sul metodo di smaltimento
corretto.
vii
03/12/16
Informação sobre Eliminação de Produtos
Information on Proper Disposal
A. Informações sobre a Eliminação de
Produtos para os Utilizadores (particulares)
XL-UR2180H
XL-UR2380H
XL-UR2580H
A. Information on Disposal for Users (private
households)
1. Na União Europeia
Atenção: Se quiser eliminar este equipamento, não o
deve fazer juntamente com o lixo doméstico comum!
O equipamento eléctrico e electrónico deve ser tratado
separadamente e ao abrigo da legislação aplicável que obriga
a um tratamento, recuperação e reciclagem adequados de
equipamentos eléctricos e electrónicos usados.
Após a implementação desta legislação por parte dos
Estados-membros, todos os cidadãos residentes na
União Europeia poderão entregar o seu equipamento
eléctrico e electrónico usado em estações de recolha
específicas a título gratuito*.
Em alguns países* o seu revendedor local também pode
recolher o seu equipamento usado a título gratuito na
compra de um novo equipamento.
*) Contacte as entidades locais para mais informações.
Se o seu equipamento eléctrico e electrónico usado
funcionar a pilhas ou baterias, deverá eliminálas em
separado, conforme a legislação local, e antes de
entregar o seu equipamento.
Ao eliminar este produto correctamente estará a contribuir
para que o lixo seja submetido aos processos de tratamento,
recuperação e reciclagem adequados. Desta forma é
possível evitar os efeitos nocivos que o tratamento
inadequado do lixo poderia provocar no ambiente e na saúde.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades
locais e informese sobre o método correcto para
proceder à sua eliminação.
Na Suíça: O equipamento eléctrico e electrónico é aceite,
a título gratuito, em qualquer revendedor, mesmo que
não tenha adquirido um novo produto. Poderá encontrar
uma lista das estações de recolha destes equipamentos
na página da Web www.swicho.ch ou www.sens.ch.
1. In the European Union
Attention: If you want to dispose of this equipment,
please do not use the ordinary dust bin!
Used electrical and electronic equipment must be treated
separately and in accordance with legislation that
requires proper treatment, recovery and recycling of used
electrical and electronic equipment.
Following the implementation by member states, private
households within the EU states may return their used
electrical and electronic equipment to designated
collection facilities free of charge*. In some countries*
your local retailer may also take back your old product
free of charge if you purchase a similar new one.
*) Please contact your local authority for further details.
If your used electrical or electronic equipment has
batteries or accumulators, please dispose of these
separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure
that the waste undergoes the necessary treatment,
recovery and recycling and thus prevent potential
negative effects on the environment and human health
which could otherwise arise due to inappropriate waste
handling.
2. In other Countries outside the EU
If you wish to discard this product, please contact your
local authorities and ask for the correct method of
disposal.
For Switzerland: Used electrical or electronic equipment
can be returned free of charge to the dealer, even if you
don't purchase a new product. Further collection facilities
are listed on the homepage of www.swico.ch or
www.sens.ch.
B. Informações sobre a Eliminação de
Produtos para Utilizadores-Empresas
B. Information on Disposal for Business Users
1. In the European Union
If the product is used for business purposes and you
want to discard it:
Please contact your SHARP dealer who will inform you
about the take-back of the product. You might be charged
for the costs arising from take-back and recycling. Small
products (and small amounts) might be taken back by
your local collection facilities.
For Spain: Please contact the established collection
system or your local authority for take-back of your used
products.
2. In other Countries outside the EU
If you wish to discard of this product, please contact your
local authorities and ask for the correct method of
disposal.
1. Na União Europeia
Se o produto for usado para fins comerciais e quiser
eliminá-lo:
Contacte o seu revendedor SHARP que irá informá-lo
sobre a melhor forma de eliminar o produto. Poderá ter de
pagar as despesas resultantes da recolha e reciclagem do
produto. Alguns produtos mais pequenos (e em pequenas
quantidades) poderão ser recolhidos pelas estações locais.
Na Espanha: Contacte o sistema de recolhas público ou
as entidades locais para mais informações sobre a
recolha de produtos usados.
2. Em outros Países fora da UE
Se quiser eliminar este produto, contacte as entidades
locais e informese sobre o método correcto para
proceder à sua eliminação.
viii
03/12/16
XL-UR2180H
XL-UR2380H
XL-UR2580H
Informationen zur Batterieentsorgung
Información sobre la eliminación de la batería
Die für dieses Produkt mitgelieferte Batterie kann
Spurenvon Blei enthalten.
Las baterías suministradas con este producto
contienen pequeñas cantidades de Plomo.
Für die EU: Die durchgestrichene Abfalltonne
bedeutet, dass gebrauchte Batterien nicht mit dem
Haushaltsmüll entsorgt werden sollten! Es gibt
getrennte Sammelsysteme für gebrauchte Batterien,
welche eine ordnungsgemäße Behandlung und
Verwertung entsprechend gesetzlicher Vorgaben
erlauben. Weitere Einzelheiten erhalten Sie von Ihrer
Gemeindeverwaltung.
Para EU: El contenedor de basura con ruedas
tachado indica que las baterías usadas no deberían
mezclarse con los residuos domésticos generales.
Existe un sistema de recogida independiente de
baterías usadas, para permitir un correcto tratamiento
y reciclado de acuerdo con la legislación vigente. Por
favor póngase en contacto con el sistema de recogida
establecido o con las autoridades locales para la
recogida selectiva de las baterías usadas.
Für die Schweiz: Die gebrauchte Batterie kann an de
Verkaufsstelle zurückgegeben werden.
Para Suiza: Las baterías usadas deben ser retornadas
al punto de venta.
Für andere Nicht-EU Staaten: Bitte erkundigen Sie
sich bei Bedarf bei Ihrer Gemeindeverwaltung nach
weiteren Informationen zur Entsorgung von
gebrauchten Batterien.
Para otros países fuera de la Unión Europea: Por
favor póngase en contacto con las autoridades locales
para un correcto procedimiento de eliminación de las
baterías usadas.
Information sur la mise au rebut de la pile
Information om batteriavyttring
Les piles/accus fournies avec ce produit peuvent
contenir des traces de Plomb.
Batteriet som följer med denna produkt kan innehålla
spår av Bly.
Au sein de l’Union Européenne: Le symbole de
lapoubelle sur roues barrée laisse supposer que les
piles/accus usagées ne doivent pas être mélangées
avec lesdéchets ménagers! Il existe un mode de
collecte séparépour les piles/accus usagées, ce qui
permet d’effectuer untraitement et un recyclage en
accord avec la législation.Veuillez contacter une
autorité locale pour plus derenseignements sur le
système mis en place.
För EU: Batteriet är märkt med den överkorsade
soptunnan vilket betyder att det inte ska kastas i det
vanliga hushållsavfallet. Det finns ett separat
insamlingssystem för batterier för att underlätta korrekt
behandling och återvinning enligt gällande lagstiftning.
Kontakta kommunen för vidare information om
insamling och återvinning.
Pour la Suisse: Les piles/accus usagées doivent
êtreretournées chez votre détaillant.
För länder utanför EU: Kontakta de lokala myndigheterna
för information om gällande sorterings- och
återvinningsföreskrifter om du behöver göra dig av med
ett använt batteri.
För Schweiz: Använda batterier lämnas till inköpsstället.
Pour les pays hors Union Européenne: Veuillez
contacterune autorité locale afin de connaître la bonne
méthode àutiliser pour la collecte de vos piles/accus
usagées.
ix
03/12/16
Informazioni sullo smaltimento della batteria
Informação sobre Eliminação de Pilhas
La batteria fornita con questo prodotto contiene tracce
di Piombo.
A bateria fornecida com este produto contém traços
de chumbo.
Per EU: Il cassonetto barrato indica che le batterie
usate non devono essere gettate assieme ai rifiuti
domestici! Vi è un sistema di raccolta differenziata per
le batterie usate, che consente il loro corretto
trattamento e riciclo secondo quanto previsto dalle
leggi vigenti. Vi prego di contattare le locali autorità
per i dettagli del sistema di raccolta e riciclaggio.
Para a União Europeia: O contentor de rodas traçado
significa que as baterias usadas não deverão ser
colocadas junto com o lixo doméstico! Existe um
sistema de separação próprio para baterias usadas,
para permitir um tratamento e reciclagem própria de
acordo com a legislação em vigor. Por favor contacte
as autoridades locais para mais detalhes nos
esquemas de recolha e reciclagem.
Per la Svizzera: Le batterie usate devono essere
restituite al punto vendita.
Per altri Stati non-EU: Vi prego di contattare le
autorità locali per conoscere il metodo corretto di
conferimento delle batterie usate.
Para a Suíça: As baterias usadas deverão ser
devolvidas ao ponto de venda.
Para os outros países fora da União Europeia: Por
favor contacte a sua autoridade local para o método
correcto de disposição das baterias usadas.
Informatie over afvalverwerking van batterijen
Information on Battery Disposal
De batterij die bij dit toestel geleverd wordt bevat
sporen van Lood.
The battery supplied with this product contains traces
of Lead.
Voor EU: De doorgestreepte vuilnisbak op wieltjes
duidt aan dat de gebruikte batterijen niet mogen
terechtkomen in het gewone huishoudelijke afval. Er
bestaat een gescheiden ophaalsysteem voor deze
gebruikte batterijen om eigen behandeling en
recyclage volgens de wetgeving toe te laten. Gelieve
de locale autoriteiten te contacteren voor de details
van ophaling en recyclage.
For EU: The crossed-out wheeled bin implies that
used batteries should not be put to the general
household waste! There is a separate collection
system for used batteries, to allow proper treatment
and recycling in accordance with legislation. Please
contact your local authority for details on the collection
and recycling schemes.
Voor Zwitserland: De gebruikte batterij moet bij het
verkooppunt teruggebracht worden.
Voor andere niet EU landen: Gelieve contact op te
nemen met uw locale autoriteiten voor de correcte
methode van verwerking van de gebruikte batterijen.
XL-UR2180H
XL-UR2380H
XL-UR2580H
For Switzerland: The used battery is to be returned to
the selling point.
For other non-EU countries: Please contact your local
authority for correct method of disposal of the used
battery.
x
03/12/16
ENGLISH
XL-UR2180H
XL-UR2380H
XL-UR2580H
General Information
ENGLISH
E-1
Introduction
Accessories
Thank you for purchasing this SHARP product. To obtain the best
performance from this product, please read this manual carefully. It
will guide you in operating your SHARP product.
XL-UR2180H Micro Component System consisting of
XL-UR2180H (main unit) and CP-UR2180H (speaker system).
XL-UR2380H Micro Component System consisting of
XL-UR2380H (main unit) and CP-UR2380H (speaker system).
XL-UR2580H Micro Component System consisting of
XL-UR2580H (main unit) and CP-UR2580H (speaker system).
Please confirm that the following accessories are included.
Remote control 1
“AA” size battery (UM/SUM-3,
R6, HP-7 or similar) 2
AM loop aerial 1
FM aerial 1
The illustrations printed in this operation manual are for the model
XL-UR2180H.
Special Note
Supply of this product does not convey a license nor imply any right
to distribute content created with this product in revenue-generating
broadcast systems (terrestrial, satellite, cable and/or other
distribution channels), revenue-generating streaming applications
(via Internet, intranets and/or other networks), other revenuegenerating content distribution systems (pay-audio or audio-ondemand applications and the like) or on revenue-generating physical
media (compact discs, digital versatile discs, semiconductor chips,
hard drives, memory cards and the like). An independent license for
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer
IIS and Thomson.
XL-UR2180H
XL-UR2380H
XL-UR2580H
Precautions
Page
General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 3
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 - 5
Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 8
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ENGLISH
General
Please ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 10 cm (4") of free space
along the sides, top and back of the equipment.
10 cm (4") 10 cm (4")
10 cm (4")
Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Setting the clock (Remote Control only) . . . . . . . . . . . . . . . . . 11
CD or MP3/WMA disc Playback
10 cm (4")
Use the unit on a firm, level surface free from
vibration.
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . .12 - 14
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . .14 - 16
MP3/WMA folder mode (only for MP3/WMA files) . . . . . . .17 - 18
USB Memory Playback
Listening to USB mass storage device / MP3 Player . . . .19 - 20
To remove USB memory device . . . . . . . . . . . . . . . . . . . . . . . . 20
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Recording on USB Memory device . . . . . . . . . . . . . . . . . 22 - 23
Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 - 25
Advanced Features
Using the Radio Data System (RDS) . . . . . . . . . . . . . . . . .26 - 30
Timer and sleep operation (Remote Control only) . . . . . .31 - 34
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . .35 - 36
References
Keep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equipment (home computers, facsimiles, etc.)
which generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.
If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
In case of an electrical storm, unplug the
unit for safety.
General Information
Contents
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 - 38
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39 - 41
8
E-2
XL-UR2180H
XL-UR2380H
XL-UR2580H
Precautions (continued)
Controls and indicators
ENGLISH
Hold the AC power plug by the head when
removing it from the wall socket, as pulling the
lead can damage internal wires.
The AC power plug is used as a disconnect
device and shall always remain readily operable.
10
11
12
13
14
General Information
Do not remove the outer cover, as this
may result in electric shock. Refer internal service to your local SHARP service
facility.
The ventilation should not be impeded by
covering the ventilation openings with
items, such as newspapers, tablecloths,
curtains, etc.
No naked flame sources, such as lighted candles, should be
placed on the apparatus.
Attention should be drawn to the environmental aspects of battery
disposal.
This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).
The apparatus is designed for use in moderate climate.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.
Volume control
E-3
The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause hearing loss.
15
Front panel
Reference page
1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2. ON/STAND-BY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5. Disc or USB Play or Pause Button . . . . . . . . . . . . . . . . . . . 14
6. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 14
7. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8. Audio In Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
9. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
10. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
11. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26
12. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
13. AUDIO IN Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
14. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
15. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
1
2
4 5 6 7 8 9 10
3
16 17
12 1314
11
18
19
15
3
4
5
Reference page
1. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 20
2. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . 18, 20
3. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 19
4. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 19
5. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
6. Traffic Announcement Indicator . . . . . . . . . . . . . . . . . . . . . 26
7. Dynamic PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
8. Traffic Programme Indicator . . . . . . . . . . . . . . . . . . . . . . . . 26
9. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
10. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
11. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . . . . . . 13, 19
12. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
13. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 24
14. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 24
15. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 25
16. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
17. Disc or USB Repeat Play Indicator . . . . . . . . . . . . . . . . 15, 21
18. Disc or USB Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . 14
19. Disc or USB Play Indicator . . . . . . . . . . . . . . . . . . . . . . 13, 20
Rear panel
Reference page
1. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2. AC Power Lead . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. AM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. AM Loop Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
6. Subwoofer Pre-output Socket . . . . . . . . . . . . . . . . . . . . . . 36
General Information
Display
Speaker system
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
1
6
2
1
3
2
4
8
E-4
XL-UR2180H
XL-UR2380H
XL-UR2580H
Controls and indicators (continued)
ENGLISH
Remote control
1
8
General Information
9
10 16
17
21
11 18
19
22
2
3
4
23
12
13
25
5
6
7
E-5
20
15
24
26
14
27 28 29
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. USB Recording Enter Button . . . . . . . . . . . . . . . . . . . . 22, 23
3. USB Recording Mode Button . . . . . . . . . . . . . . . . . . . . 22, 23
4. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 11, 31, 34
5. Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . 10
7. Extra Bass/Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . 8, 10
8. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
9. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
10. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 24, 26
11. AUDIO IN/USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . 19, 35
12. MP3/WMA Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
13. MP3/WMA Display Button. . . . . . . . . . . . . . . . . . . . . . . . . . . 19
14. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 10
15. Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 16
16. Play Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
17. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
18. USB Recording Button . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23
19. USB Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
20. Memory Button . . . . . . . . . . . . . . . . . . . . . . . 11, 16, 25, 31, 34
21. Disc Play or Pause Button . . . . . . . . . . . . . . . . . . . . . . 14, 15
22. USB Play or Pause Button . . . . . . . . . . . . . . . . . . . . . . . 20, 21
23. Tuning Up Button, Folder Up Buttom . . . . . . . . . . . . . . 19, 24
24. Track Up or Fast Forward,
Tuner Preset Up, Time Up Button . . . . . . . . 11, 14, 19, 25, 31
25. Track Down or Fast Reverse,
Tuner Preset Down, Time Down Button . . . 11, 14, 19, 25, 31
26. Tuning Down Button, Folder Down Button . . . . . . . . . 19, 24
27. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
28. RDS PTY Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
29. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
XL-UR2180H
XL-UR2380H
XL-UR2580H
System connections
ENGLISH
Make sure to unplug the AC power lead before making any connections.
Aerial connection (see page 7)
FM aerial
Left speaker
Preparation for Use
Right speaker
AM loop aerial
Speaker connection
(see page 7)
Wall socket
(AC 220 - 240 V ~ 50 Hz)
AC power connection (see page 8)
8
E-6
XL-UR2180H
XL-UR2380H
XL-UR2580H
System connections (continued)
ENGLISH
Aerial connection
Speaker connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS socket and position
the FM aerial wire in the direction where the strongest signal can be
received.
Preparation for Use
Supplied AM loop aerial:
Connect the AM loop aerial to the AM and Earth (GND) terminals.
Position the AM loop aerial for optimum reception. Place the AM loop
aerial on a shelf, etc., or attach it to a stand or a wall with screws (not
supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Wall
E-7
Screws (not supplied)
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
SPEAKERS
RATED SPEAKER IMPEDANCE:
4 OHMS MIN.
RIGHT
LEFT
Red
Black
Caution:
Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
Do not mistake the right and the left
channels. The right speaker is the one on the
SPEAKERS EDANCE:
AKER IMP
RATED SPE MS MIN.
right side when you face the unit.
4 OH
Do not let the bare speaker wires touch
each other.
Do not allow any objects to fall into or to be
LEFT
RIGHT
placed in the bass reflex ducts.
Do not stand or sit on the speakers. You may
be injured.
Incorrect
Speaker grilles are removable
Make sure nothing comes into contact
with the speaker diaphragm when you
remove the speaker grilles.
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
AC power connection
Demonstration mode
After checking all the connections have been made correctly, plug
the AC power lead of this unit into the wall socket. If you plug in the
unit first, the unit will enter the demonstration mode.
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
Wall socket
(AC 220 - 240 V ~ 50 Hz)
Note:
Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button on the remote control again.
Note:
When the power is on, the X-BASS/DEMO button can be used to
select the extra bass mode.
External FM aerial
Use an external FM aerial if you require better reception.
Consult your dealer.
Preparation for Use
To cancel the demonstration mode:
When the unit is in the power standby mode (demonstration mode),
press the X-BASS/DEMO button on
the remote control. The unit will
enter the low power consumption
mode.
External
FM aerial
75 ohms
coaxial cable
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
8
E-8
XL-UR2180H
XL-UR2380H
XL-UR2580H
Remote control
ENGLISH
Battery installation
1
2
Preparation for Use
3
Open the battery cover.
Insert the supplied batteries according to the direction
indicated in the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Close the cover.
Test of the remote control
Check the remote control after checking all the connections (see
pages 6 - 8).
Point the remote control directly at the remote sensor on the unit.
Precautions for battery use:
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Battery removal:
Open the battery cover and pull up the battery to take out.
E-9
Notes concerning use:
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 “AA” size batteries (UM/
SUM-3, R6, HP-7 or similar).
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
Keep the remote control away from moisture, heat, shock, and
vibrations.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy the music.
XL-UR2180H
XL-UR2380H
XL-UR2580H
General control
ENGLISH
Volume control
Main unit operation:
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned anti-clockwise, the volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
0 ..... 30 MAXIMUM
Equaliser
To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
Illumination light control
When the power is turned on, the ring around the volume control
lights up. To turn on/off the light, hold down the CLEAR/DIMMER
button on the remote control for more than 2 seconds.
Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
When the EQUALIZER MODE button on the remote control is
pressed, the current mode setting will be displayed. To change to a
different mode, press the EQUALIZER MODE button repeatedly
until the desired sound mode appears.
FLAT
Equalizer off.
ROCK
For rock music.
CLASSIC
For classical music.
POPS
For pop music.
VOCAL
Vocals are enhanced.
JAZZ
For jazz.
Basic Operation
Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies, and “X-BASS” will
appear. To cancel the extra bass mode, press the X-BASS/DEMO
button on the remote control.
8
E-10
XL-UR2180H
XL-UR2380H
XL-UR2580H
Setting the clock (Remote Control only)
ENGLISH
5
Press the
or
button to adjust the hour and then
press the MEMORY button.
Press the
or
button once to advance the time by 1 hour.
Hold it down to advance continuously.
Basic Operation
6
In this example, the clock is set for the 24-hour (0:00) display.
1
2
3
Press the ON/STAND-BY button to turn the power on.
4
Press the
or
button to select 24-hour or 12-hour
display and then press the MEMORY button.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select
“CLOCK”, and then press the MEMORY button.
“0:00”
“AM 12:00”
“AM 0:00”
E-11
The 24-hour display will appear.
(0:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
Press the
or
button to adjust the minutes and then
press the MEMORY button.
Press the
or
button once to advance the time by 1
minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to display the time.
The time display will appear for about 10 seconds.
Note:
The “CLOCK” will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1. If the “CLOCK” does not
appear in step 3, step 4 (for selecting the 24-hour or 12-hour
display) will be skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to “Factory Reset,
Clearing All Memory” on page 37 for details.]
2 Perform “Setting the clock” from step 1 onwards.
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
During VBR file playback, time counter in the display may differ
from its actual playback time.
Bitrate which is supported by MP3 is 32 ~ 320 kbps.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for Windows Media Player.
“MP3” and “WMA” indicator will light up after the unit reads
information on an MP3 or WMA disc.
Bitrate which is supported by WMA is 64 ~ 160 kbps.
Auto power on function:
When you press any of the following buttons, the unit turns on.
CD button (main unit and remote control): The unit turns on and
the “CD” function is activated.
CD / button on the remote control: The unit turns on and CD
playback starts (regardless of the last function).
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB).
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
8
E-12
XL-UR2180H
XL-UR2380H
XL-UR2580H
Listening to a CD or MP3/WMA disc (continued)
ENGLISH
CD or MP3/WMA disc Playback
1
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the
OPEN/CLOSE button to open the disc tray.
Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3" ) disc in the middle of the disc tray.
12 cm (5")
5
Press the
[CD]
8 cm (3")
OPEN/CLOSE button to close the disc tray.
TOTAL indicator
MP3 indicator
WMA indicator
[MP3/WMA]
Total number of
Total playing
Total number
tracks on the disc time of the disc of files
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
Press the
/
button to start playback.
Disc play indicator
After the last track is played, the unit will stop automatically.
E-13
To remove the discs:
In the stop mode, press the
OPEN/CLOSE button.
Caution:
Do not place two discs in one disc tray.
Do not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
Do not push the disc tray while it is moving.
If the power fails while the tray is open, wait until the power is
restored.
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
Advanced CD or MP3/WMA disc
playback
Function
Play
Stop
Pause
Main unit
Remote
control
Operation
Press in the stop mode.
Press in the playback
mode.
Track up/
Track down
Press in the playback
mode. Press the /
button to resume playback
from the paused point.
Press in the playback or
stop mode.
If you press the button in
the stop mode, press the
/ button to start the
desired track.
Fast
forward/
Fast
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast forward,
“END” will appear on the display and CD operation will be
paused. When the beginning of the first track is reached during
fast reverse, the unit will enter the playback mode.
Rewritable multi-session discs with unfinished writing, can still be
played.
ENGLISH
Direct track search
By using the direct search buttons, the desired tracks on the current
disc can be played.
Use the direct search buttons on
the remote control to select the
desired track while playing the
selected disc.
Selected track number
The direct search buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “+10” button.
A. For example, to choose 13
1 Press the “+10” button once.
2 Press the “1” button.
3 Press the “3” button.
B. For example, to choose 130
1 Press the “+10” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
CD or MP3/WMA disc Playback
Various disc functions
XL-UR2180H
XL-UR2380H
XL-UR2580H
Notes:
A track number higher than the number of tracks on the disc
cannot be selected.
During random play, direct search is not possible.
To stop playback:
Press the (CD ) button.
8
E-14
XL-UR2180H
XL-UR2380H
XL-UR2580H
Advanced CD or MP3/WMA disc playback (continued)
ENGLISH
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
CD or MP3/WMA disc Playback
To repeat one track:
Press the PLAY MODE button once.
Press the / button.
E-15
Random play
The tracks on the disc can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control.
Press the / button.
To repeat all tracks:
Press the PLAY MODE button twice.
Press the / button.
To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page 16 and
then press the PLAY MODE button once.
Press the / button.
To cancel repeat play:
Press the PLAY MODE button again until “ ” disappears.
To cancel random play:
Press the PLAY MODE button.
“R” will disappear.
Notes:
If you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous
track. The beginning of the trackbeing played will be located.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the
(CD ) button. Otherwise, the disc will play continuously.
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
You can choose up to 32 selections for playback in the order you like.
1
2
While in the stop mode, press the
MEMORY button on the remote
control to enter the programming
save mode.
Press the direct search buttons
on the remote control to select
the desired track.
Selected track number
You can also select a track by pressing the
or
button.
3
4
5
6
Press the MEMORY button to
save the track number.
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
Press the (CD ) button.
The total number in memory will
appear.
Press the
/
button to start playback.
To clear the programmed selections:
Press the CLEAR/DIMMER button on the
remote control while the “MEMORY” indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track
programmed.
To cancel the programmed play mode:
While in the stop mode and the “MEMORY” indicator is lit, press the
CLEAR/DIMMER button on the remote control. The “MEMORY”
indicator will disappear and all the programmed contents will be
cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEMORY” indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the previous program.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or
button.
MP3/WMA Folder programmed:
Only tracks in the same folder can be select. Select which folder to
be programmed before entering program mode. (refer page 17 to
select folder)
Notes:
When a disc is ejected, the program is automatically cancelled.
Even if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
During the program operation, random play is not possible.
CD or MP3/WMA disc Playback
Programmed play
8
E-16
XL-UR2180H
XL-UR2380H
XL-UR2580H
CD or MP3/WMA disc Playback
ENGLISH
MP3/WMA folder mode (only for MP3/WMA files)
To playback MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by burning
them to a CD-R/RW disc or by connecting a USB Memory Player
device.
Your downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
About folder playback order
If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.
These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the folder is skipped and the next folder will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
1. ROOT folder is set as folder 1.
2. As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2
and folder 3.
3. As for folder inside Folder A (Folder C and Folder D), the folder
which is recorded earlier on the disc will be set as folder 4 and
folder 5.
4. Folder E that is inside Folder D will be set as folder 6.
Folder mode on/off can be operated by the FOLDER button on the
remote control. Files that are played when folder mode is set to the
on position, may differ from those played back when folder mode is
turned off.
Folder Mode Off case:
All the files starting from the selected file will be played back. If file 3
inside Folder C is selected, all the files starting from file 3 will be
played back until file 10 of Folder E.
Folder Mode On case:
All the files inside the selected folder will be played back.
In case Folder D is selected, file 6, 7 and 8 will be played back. File
9 and 10 in Folder E will not be played back.
ROOT
(FOLDER 1)
FOLDER A
(FOLDER 2)
The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that
this unit will playback the files not according to our expected
playback order.
For CD MP3/WMA, 512 numbers of folders and files inclusives of
the folders which have non playable files can be read.
FOLDER B
(FOLDER 3)
E-17
FOLDER C
(FOLDER 4)
FILE 3
FILE 4
FILE 5
FOLDER D
(FOLDER 5)
FILE 6
FILE 7
FILE 8
FOLDER E
(FOLDER 6)
FILE 1
FILE 2
FILE 9
FILE 10
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Procedure to play back MP3/WMA disc with
folder mode on
4
Press the / (CD / ) button.
Playback will start and file name will be displayed.
To play back CD-R/RW.
Title, Artist & Album name are displayed if they are recorded on
the disc.
Display content can be changed by pressing the DISPLAY
button.
Press the CD button, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed.
MP3 indicator
WMA indicator
Disc Name
File Name Display
TITLE-1 Indicator
Title Display
Function Display
TITLE-2 Indicator
Artist Display
TITLE-3 Indicator
Album Display
TOTAL indicator
Total number of files
2
Press the FOLDER button, and press the TUNING ( or )
button to select desired playback folder. (Folder mode on)
FOLDER indicator
(
)
Clock Display
FOLDER number
3
Total files in Folder 3
Select desired file to be played back by pressing the
button.
or
In case of playback with the folder mode on, press the TUNING (
or ) button, and the folder can be selected even though it is in
playback/pause mode.
It will continue playback/pause mode in the 1st track of the selected
folder.
( ) Only appears when clock is already set.
Note:
If “NO SUPPORT” is displayed, it means “Copyright protected
WMA file” or “Not supported playback file” is selected.
CD or MP3/WMA disc Playback
1
8
E-18
XL-UR2180H
XL-UR2380H
XL-UR2580H
Listening to USB mass storage device / MP3 Player
ENGLISH
3
USB Memory Playback
AUDIO
IN
Press the / (USB / ) button.
Playback will start and the file name will be displayed.
Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
Note:
This product is not compatible with MTP and AAC file systems.
TITLE-1 Indicator
Title Display
Function Display
TITLE-2 Indicator
Artist Display
TITLE-3 Indicator
Album Display
(
)
Clock Display
To play back USB/MP3 Player with Folder mode off
1
File Name Display
Press the USB button, and push up the USB door. Connect
the USB Memory device that has MP3/WMA format files on
the unit.
(
) Only appears when clock is already set.
Note:
To pause playback:
Press the USB / button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
To play back USB/MP3 Player with Folder mode on
When the USB memory is connected to the main unit, the
device information will be displayed.
Volume ID
1
MP3 indicator
WMA indicator
Press the USB button, and push up the USB door. Connect
the USB Memory device that has MP3/WMA format files on
the unit.
When the USB memory is connected to the main unit, the
device information will be displayed.
TOTAL indicator
Total number of files
2
Select desired file to be played back by pressing the
button.
or
Volume ID
MP3 indicator
WMA indicator
TOTAL indicator
Total number of files
E-19
To remove USB memory device
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Press the FOLDER button, and press the TUNING (
button to select desired playback folder.
or
)
FOLDER indicator
FOLDER number
3
4
Always remove the USB memory device after “UNPLUG OK” appears
on the display. Improper removal of the USB memory device may
cause irregularities such as continuous appearance of “READING
FILES”. Should this happen, turn off the unit and then turn it on again.
Total files in Folder 2
To start playback with folder mode on, go to step 4.
To change the playback folder, press the TUNING (
button to select another folder.
or
)
Select desired file to be played back by pressing the
button.
2
( •TITLE-1 Indicator
Title Display
Function Display
( •TITLE-2 Indicator
Artist Display
( •TITLE-3 Indicator
Album Display
(
)
Clock Display
(
Disconnect USB memory device from the USB terminal.
or
Press the / (USB / ) button.
Playback will start and the file name will be displayed.
Title, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
File Name Display
Press the USB button to stop playback. Then press the
USB
button again and wait until “UNPLUG OK” is
displayed.
) Only appears when clock is already set.
Note:
To pause playback:
Press the USB / button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
Notes:
SHARP will not be held liable for the loss of data whilst the USB memory
device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played back
when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work on
this audio system.
USB cable is not recommended for use in this audio system to connect
to USB memory device. Use of the USB cable will affect the
performance of this audio system.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC connection but is
used for music streaming with a USB memory device.
External HDD-storage cannot be played back via USB terminal.
If the data inside the USB memory is large, it may take longer time for
the data to be read.
This product can play WMA and MP3 files. It will automatically detect
the file type being played. If unplayable file is played on this product,
“NO SUPPORT” is indicated and the file will be automatically skipped.
This will take a few seconds. If abnormal indications appear on the display due to the unspecified file, turn off the unit and then turn it on again.
This product relates to USB mass storage devices and MP3 players.It may
however face some irregularities due to various unforeseen reasons from
some devices. Should this happen, turn off the unit and then turn it on again.
The USB port is only intended for direct connection to a USB memory
device without any cable.
USB Memory Playback
2
1
8
E-20
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Advanced USB playback
Repeat play
Repeat play can play all tracks sequence continuously.
To repeat all tracks:
Press the PLAY MODE button once.
To cancel repeat play:
Press the PLAY MODE button again until “ ” will disappear.
USB Memory Playback
Random play
E-21
The tracks can be played in random order automatically.
To random play all tracks:
Press and hold down PLAY MODE button on the remote control.
For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to 32 characters.
Maximum total number of MP3/WMA files is 65280. Maximum
total number of folders is 255 inclusive of root directory. Folders
with non playable files are also counted.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
Time display cannot be changed by the DISPLAY button.
The ID3TAG information supported are TITLE, ARTIST and
ALBUM only.
Title name, artist name and album name can be displayed by
pressing the DISPLAY button during file playback or pause mode.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files.
Copyright protected WMA files cannot be played back.
File Erase
To cancel random play:
Press the PLAY MODE button. “R” will disappear.
Notes:
If you press the
button during random play, you can move to
the track selected next by the random operation. However, the
button does not allow you to move to the previous track. It will go
to the beginning of the current track instead.
In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Note:
( ) When folder mode is on, the selected play mode can be used for
the files in the selected folder only.
Notes:
This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3” , “MPEG-2.5 Audio Layer-3” and MP1,
MP2 format are not supported.
Programme playback for USB memory is not available.
Playback order for MP3 files may differ depending on the writing
software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
1. At USB STOP condition, press
or
key to select the desired
MP3 or WMA file to be erased.
2. Press MODE key, and the display will show “ERASE” menu.
3. Within 10 seconds press ENTER key. “ERASE?” will be displayed.
To cancel file erase operation, press USB STOP key.
4. Press ENTER key again to confirm the file erase selection. “FILE
ERASE” will be displayed.
5. “COMPLETE” will be displayed for a few seconds once erasing
process is finished.
Folder Erase
1. At USB STOP condition (Folder mode on), press TUNING ( or
) key to select the desired folder to be erased.
2. Press MODE key, and the display will show “ERASE” menu.
3. Within 10 seconds press ENTER key. “ERASE?” will be displayed.
To cancel folder erase operation, press USB STOP key.
4. Press ENTER key again to confirm the folder erase selection.
“FOL ERASE” will be displayed.
5. “COMPLETE” will be displayed for a few seconds once erasing
process is finished.
XL-UR2180H
XL-UR2380H
XL-UR2580H
Recording on USB Memory device
ENGLISH
5
CD to USB recording
There are four kinds of recording from CD to USB.
1. One File Recording (for CD) or One File Copy (for MP3 disc).
2. One Disc Recording (for CD) or One Disc Copy (for MP3 disc).
3. Programme Recording.
4. One Folder Copy (for MP3 disc only).
Select the bitrate before starting recording.
Press the MODE button and “BIT RATE” will be displayed and then
press ENTER button.
This bitrate selection is valid for CD, TUNER and AUDIO IN function only.
Within 10 seconds, press the
or
button to select the desired bitrate, and press the ENTER button.
Disc Recording (for CD) or Disc Copy (for MP3 disc)
1
Perform steps 1 - 5 in “Listening to a CD or MP3/WMA disc”
section on page 13.
2
Whilst in the stop mode, press the RECORD button to start
USB recording.
“REC START” will be displayed for a few seconds and
recording will start after the USB device has been initialised.
3
During disc recording, the display will show normal CD
playback but during disc copy process for MP3 disc,
“COPY” will be displayed.
4
After the last track of the disc is played, the unit will stop
playback and recording process automatically, and
“WRITING USB” will be displayed for a few seconds.
[128 kbps]
[192 kbps]
[96 kbps]
One File Recording (for CD) or One File Copy (for MP3 disc)
1
Perform steps 1 - 5 in “Listening to a CD or MP3/WMA disc” section
on page 13.
2
3
Press
4
During file recording, the display will show normal CD playback but
during file copy process for MP3 disc, “COPY” will be displayed.
or
button to select the desired file to be recorded.
Press the RECORD button to start USB recording at the selected track.
“REC START” will be displayed for a few seconds and recording will start
after the USB device has been initialised.
[CD]
[MP3]
After the selected song finishes playing, the unit will stop
playback and recording process automatically and
“WRITING USB” will be displayed for a few seconds.
Programme Recording
1
2
Perform steps 1 - 6 in “Programmed play” section on page 16.
3
During recording process, the display will show normal CD
programme playback.
4
After the last programme track is played, the unit will stop playback
and recording process automatically, and “WRITING USB” will be
displayed for a few seconds.
USB Memory Playback
This system can record a standard CD, CD-R/RW in the CD format or
CD-R/RW with MP3 files, TUNER function to the USB device.
Whilst in the stop mode, press the RECORD button to start USB
recording.
“REC START” will be displayed for a few seconds and recording will start
after the USB device has been initialised.
8
E-22
XL-UR2180H
XL-UR2380H
XL-UR2580H
USB Memory Playback
ENGLISH
E-23
Recording on USB Memory device (continued)
One folder copy (for MP3 disc only)
1
Perform steps 1 - 2 in “Procedure to play back MP3/WMA
disc with folder mode on” section on page 18.
2
Whilst in the stop mode, press the RECORD button to start
USB recording.
“REC START” will be displayed for a few seconds and recording
will start after the USB device has been initialised.
3
4
During folder copy process, “COPY” will be displayed.
After the last track of a selected folder finishes playing, the
unit will stop playback and recording process automatically
and “WRITING USB” will be displayed for a few seconds.
Tuner to USB recording
1
To select tuner, press the TUNER (BAND) button and select desired
band station (see “Tuning” on page 24).
2
Press the RECORD button to start recording.
“REC START” will be displayed for a few seconds and recording will start
after the USB device has been initialised.
3
During recording process, the display show as normal TUNER
function.
It is not possible to display ID3 tag information during MP3 disc
copy process.
Do not POWER OFF the main unit whilst “WRITING USB” shows
on the display. Wait until “WRITING USB” display disappear before turning it off.
This system does not support WMA disc recording.
“USB FULL” message will be displayed if USB device is set in
write-protect mode or if there is insufficient free space in it.
USB playback order is the same as MP3/WMA playback order
(see page 17) and follow the recording order of the folder.
USB folder structure (of recorded files)
When recording files to USB memory, folders inside it will be created
automatically according to the source selected.
Example:
If recording from CD to USB, the files will be saved in a folder named
CDREC001. For next recording session, the next folder will be
created and named CDREC002 and so on.
If the source is TUNER (FM band), folder FMREC001 will be created.
For TUNER (AM band), folder AMREC001 will be created.
[TUNER]
To stop recording:
Press the USB STOP button. The unit will stop the recording process
and “WRITING USB” will be displayed for a few seconds.
Notes:
Recording can be operated in CD stop mode only. During CD playback, the RECORD button is invalid.
The sound is heard during CD disc recording but not with an MP3 disc.
Bitrate selection is valid for CD disc and TUNER recording only. It is
invalid for MP3 disc. The default bitrate recording is 128 kbps.
Maximum number of folders that can be created is 128.
XL-UR2180H
XL-UR2380H
XL-UR2580H
Listening to the radio
ENGLISH
Tuning
1
2
Press the ON/STAND-BY button to turn the power on.
3
Press the TUNING ( or ) button on the remote control to
tune in to the desired station.
Press the TUNER (BAND) button repeatedly to select the
desired frequency band (FM or AM).
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or ) button again.
When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light
up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 27.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be displayed.
“ ” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to monaural,
and the sound becomes clearer.
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (main unit and remote control): The unit
turns on and the “TUNER” function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB).
Radio
Manual tuning:
Press the TUNING ( or ) button repeatedly to the tune in to
the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
FM stereo mode indicator
FM stereo receiving indicator
8
E-24
XL-UR2180H
XL-UR2380H
XL-UR2580H
Listening to the radio (continued)
ENGLISH
Memorising a station
Radio
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
2
Perform steps 1 - 3 in “Tuning” on page 24.
3
Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4
Within 30 seconds, press the MEMORY button to store that
station in memory.
Press the MEMORY button to enter the preset tuning
saving mode.
If the “MEMORY” and preset number indicators disappear
before the station is memorised, repeat the operation from step
2.
5
Repeat steps 1 - 4 to set other stations, or to change a
preset station.
When a new station is stored in the memory, the station
previously memorised for that preset channel number will be
erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead become
disconnected.
E-25
To recall a memorised station
Press the PRESET ( or
select the desired station.
) button for less than 0.5 seconds to
To scan the preset stations
The stations saved in the memory can be scanned automatically.
(Preset memory scan)
1 Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2 Press the PRESET (
or ) button again when the desired
station is located.
To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by mode.
Whilst pressing down the button, press the TUNER (BAND)
button until “TUNER CLEAR” appears.
XL-UR2180H
XL-UR2380H
XL-UR2580H
Using the Radio Data System (RDS)
ENGLISH
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the display will
switch as follows:
Station name (PS)
Programme type (PTY)
Frequency
Radio text (RT)
You can control the RDS by using the buttons on the remote
control only.
Advanced Features
RDS is a broadcasting service which a growing number of FM
stations provide. These FM stations send additional signals
along with their regular programme signals. They send their
station names, and information about the type of programme
such as sport, music, etc.
When tuned to an RDS station, “RDS” and the station name will be
displayed.
“TP” (Traffic Programme) will appear on the display when the
received broadcast carries traffic information, and “TA” (Traffic
Announcement) will appear whilst a traffic information is on air.
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dynamic PTY
station is received.
When tuning in to a station other than an RDS station or to an RDS
station which sends weak signal, the display will change in the
following order:
NO PS
NO PTY
FM 98.80 MHz
NO RT
8
E-26
XL-UR2180H
XL-UR2380H
XL-UR2580H
Using the Radio Data System (RDS) (continued)
ENGLISH
Using the Auto Station Programme Memory
(ASPM)
Whilst in the ASPM operation mode, the tuner will automatically
search for new RDS stations. Up to 40 stations can be stored.
If you have already stored some stations in the memory, the number
of new stations you can store will be less.
Advanced Features
1
2
E-27
Press the TUNER (BAND) button to select the FM band.
Press and hold down the RDS ASPM button on the remote
control for at least 3 seconds.
1 After “ASPM” has flashed for about 4 seconds, scanning will
start (87.50 - 108.00 MHz).
2
When an RDS station is found, “RDS” will appear for a short
time and the station will be stored in memory.
3
After scanning, the number of stations stored in memory will
be displayed for 4 seconds, and then “END” will appear for
4 seconds.
To stop the ASPM operation before it is completed:
Press the RDS ASPM button whilst it is scanning for stations.
The stations which are already stored in memory will be kept there.
Notes:
If the same station is broadcasting on different frequencies, the
strongest frequency will be stored in the memory.
Any station which has the same frequency as the one stored in the
memory will not be stored.
If 40 stations have already been stored in the memory, scanning
will be aborted. If you want to redo the ASPM operation, erase the
preset memory.
If no stations have been stored in the memory, “END” will appear
for about 4 seconds.
If the RDS signals are very weak, station names may not be
stored in the memory.
To erase all of the contents of preset memory:
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the button, press the TUNER (BAND) button until “TUNER CLEAR” appears.
After performing this operation, all of the preset memory
information will be erased.
To store a station name again if the wrong name was stored in
memory:
It may be impossible to store station names in the memory using the
ASPM function if there is lots of noise or if the signal is too weak. In
this case, perform as follows.
1 Press the PRESET ( or ) button to check whether the names
are correct.
2 If you find a wrong name during receiving the station, wait until the
correct name will be displayed. And then press the MEMORY
button.
3 Within 30 seconds, press the MEMORY button whilst the preset
channel number is flashing.
The new station name has been stored in memory correctly.
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Notes for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
“PS”, “NO PS” and a station name appear alternately, and the unit
does not operate properly.
If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work
properly.
When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
“NO PS”, “NO PTY” or “NO RT” will flash for about 5 seconds, and
then the frequency will be displayed.
Notes for radio text:
The first 10 characters of the radio text will appear for 4 seconds
and then they will scroll across the display.
If you tune in to an RDS station which is not broadcasting any
radio text, “NO RT” will be displayed when you switch to the radio
text position.
Whilst radio text data is received or when the text contents
change, “RT” will be displayed.
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 29 - 30) from the stations
in the memory.
1
2
Press the TUNER (BAND) button to select the FM.
Press the RDS PTY button on the remote control.
“SELECT” and “PTY TI” will appear alternately for about
6 seconds.
3
Within 6 seconds, press the PRESET (
select the programme type.
or
) button to
Each time the button is pressed, the programme type will
appear. If the button is held down for more than 0.5 seconds,
the programme type will appear continuously.
4
Whilst the selected programme type is flashing (within
6 seconds), press the RDS PTY button again.
Advanced Features
Notes:
The same station name can be stored in different channels.
In a certain area or during certain period, the station names may
temporarily be different.
After the selected programme type has been lit for 2 seconds,
“SEARCH” will appear, and the search operation will start.
8
E-28
XL-UR2180H
XL-UR2380H
XL-UR2580H
Using the Radio Data System (RDS) (continued)
ENGLISH
Advanced Features
Notes:
If the display stops flashing, start again from step 2. If the unit finds
the desired programme type, the corresponding channel number
will flash for about 4 seconds, and then the station name will flash
for 7 seconds, which will remain lit.
If you want to listen to the same programme type of another
station, press the RDS PTY button whilst the channel number or
station name is flashing. The unit will look for the next station.
If no station can be found, “NOT FOUND” will appear for 4
seconds.
If you select the traffic programme:
If you select the traffic programme (TP) in step 3, “TP” will appear.
(This does not mean that you can listen to the traffic information at
that time.)
When the traffic information is broadcast, “TA” will appear.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1 Press the TUNER (BAND) button to select the FM band.
2 Press the PRESET ( or ) button on the remote control to select a desired station.
3 The station name will be displayed for 6 seconds. Then the
display will change.
Descriptions of the PTY (Programme Type) codes, TP (Traffic
Programme) and TA (Traffic Announcement).
You can search for and receive the following PTY, TP and TA
signals.
NEWS
AFFAIRS
INFO
SPORT
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
ROCK M
EASY M
E-29
Short accounts of facts, events and publicly
expressed views, reportage and actuality.
Topical programme expanding or enlarging upon
the news, generally in different presentation style or
concept, including debate, or analysis.
Programmes whose purpose is to impart advice in
the widest sense.
Programme concerned with any aspect of sport.
Programme intended primarily to educate, of which
the formal element is fundamental.
All radio plays and serials.
Programmes concerned with any aspect of national
or regional culture, including language, theatre, etc.
Programmes about the natural sciences and
technology.
Used for mainly speech-based programmes usually
of light-entertainment nature, not covered by other
categories. Examples include: quizzes, panel
games, personality interviews.
Commercial music, which would generally be
considered to be of current popular appeal, often
featuring in current or recent record sales charts.
Contemporary modern music, usually written and
performed by young musicians.
Current contemporary music considered to be
“easy-listening”, as opposed to Pop, Rock or
Classical, or one of the specialised music styles,
Jazz, Folk or Country. Music in this category is
often but not always, vocal, and usually of short
duration.
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
SOCIAL
RELIGION
PHONE IN
TRAVEL
LEISURE
JAZZ
Classical music for general, rather than specialist
appreciation. Examples of music in this category
are instrumental music, and vocal or choral works.
Performances of major orchestral works,
symphonies, chamber music, etc., and including
Grand Opera.
Musical styles not fitting into any of the other
categories. Particularly used for specialist music of
which Rhythm & Blues and Reggae are examples.
Weather reports and forecasts and meteorological
information.
Stock Market reports, commerce, trading, etc.
For programmes targeted at a young audience,
primarily for entertainment and interest, rather than
where the objective is to educate.
Programmes about people and things that
influence them individually or in groups. Includes:
sociology, history, geography, psychology and
society.
Any aspect of beliefs and faiths, involving a God or
Gods, the nature of existence and ethics.
Involving members of the public expressing their
views either by phone or at a public forum.
Features and programmes concerned with travel to
near and far destinations, package tours and travel
ideas and opportunities. Not for use for
announcements about problems, delays, or
roadworks affecting immediate travel where TP/TA
should be used.
Programmes concerned with recreational activities
in which the listener might participate. Examples
include, Gardening, Fishing, Antique collecting,
Cooking, Food & Wine, etc.
Polyphonic, syncopated music characterised by
improvisation.
COUNTRY
Songs which originate from, or continue the musical
tradition of the American Southern States.
Characterised by a straightforward melody and
narrative story line.
NATION M
Current Popular Music of the Nation or Region in
that country's language, as opposed to
International “Pop” which is usually US or UK
inspired and in English.
OLDIES
Music from the so-called “golden age” of popular
music.
FOLK M
Music which has its roots in the musical culture of a
particular nation, usually played on acoustic
instruments. The narrative or story may be based
on historical events or people.
DOCUMENT Programme concerned with factual matters,
presented in an investigative style.
TEST
Broadcast when testing emergency broadcast
equipment or receivers.
ALARM !
Emergency
announcement
made
under
exceptional circumstances to give warning of
events causing danger of a general nature.
NONE
No programme type (receive only).
TP
Broadcasts which carry traffic announcements.
TA
Traffic announcements are being broadcast.
Advanced Features
LIGHT M
8
E-30
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Timer and sleep operation (Remote Control only)
Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB,
AUDIO IN) at a preset time.
Timer recording:
The unit turns on and starts recording from TUNER at the preset
time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Advanced Features
Once timer:
Once timer play or once timer recording works for
one time only at a preset time.
For example, if you are away but want to record a program on a
radio station.
Daily timer:
Daily timer play or daily timer recording works at
the same preset time every day.
For example, set the timer as a wake-up call every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1
2
Set the daily timer (pages 31 - 33).
Set the once timer (pages 31 - 33).
Start
Once timer
Stop
Start
Stop
Note:
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
E-31
1 Check that the clock is set to the correct time (refer to page 11).
If it is not set, you cannot use the timer function.
2 For timer playback: Plug in USB or load discs to be played.
For timer recording: Plug in USB for recording in the USB
terminal.
1
2
3
1 minute or more
Daily timer
Timer playback or timer recording
Before setting timer:
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
Set the clock to the correct time if “ONCE” or “DAILY” does not
appear.
XL-UR2180H
XL-UR2380H
XL-UR2580H
4
Within 10 seconds, press the
or
button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
5
Press the
or
button to select “PLAY” or “REC”, and
press the MEMORY button.
9
Switch input with the
or
button, and then press the
MEMORY button.
To select the timer playback source: CD, TUNER, USB or
AUDIO IN.
This operation will be skipped for timer recording.
When you select the tuner, select a station by pressing the
or
button, and then press the MEMORY button.
If a station has not been programmed, “NO PRESET” will be
displayed and timer setting will be cancelled.
10
Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
11
Press the ON/STAND-BY button to enter the power standby mode.
The “TIMER” indicator lights up and the unit is ready for timer
playback.
The illustrations show the daily timer setting.
6
Press the
or
button to adjust the hour and then
press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7
Press the
or
button to adjust the minutes and then
press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
Advanced Features
ENGLISH
Continued to the next page.
8
E-32
XL-UR2180H
XL-UR2380H
XL-UR2580H
Timer and sleep operation (Remote Control only) (continued)
Advanced Features
ENGLISH
E-33
12
When the preset time is reached, playback or recording
will start.
The volume will increase gradually until it reaches the preset
volume.
The “r” indicator will blink during timer playback/recording.
The “DAILY r” indicator will blink during timer playback/
recording.
13
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will continue
until the daily timer setting is cancelled. Cancel the daily timer
when it is not in use.
Notes:
When performing timer playback using another unit connected to
the USB terminal or AUDIO IN sockets, select “USB” or “AUDIO
IN” in step 9.
This unit will turn on or enter the power stand-by mode automatically. However, the connected unit will not turn on or off.
To stop the timer playback/recording, follow step “Cancelling the
timer setting in the timer stand-by mode” on the right hand side
of this page.
Checking the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
CALL” or “DAILY CALL”, and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
Cancelling the timer setting in the timer stand-by mode:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
OFF” or “DAILY OFF”, and press the MEMORY button.
Timer will be cancelled (the setting will not be cancelled).
Reusing the memorised timer setting:
The timer setting will be memorised once it is entered. To reuse the
same setting, perform the following operations.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select “ONCE”
or “DAILY”, and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select “ONCE
ON” or “DAILY ON”, and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
The radio, compact disc and USB can all be turned off automatically.
1
2
3
Play back the desired sound source.
4
Press the
Press the CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select
“SLEEP”, and press the
MEMORY button.
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 5-minute intervals
5 minutes - 1 minute 1-minute intervals
5
Press the MEMORY button.
“SLEEP” will appear.
6
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep operation finishes.
To confirm the remaining sleep time:
1 Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select “SLEEP
X : XX”.
“X : XX” is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the MEMORY button (steps 4 - 5).
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst “SLEEP” is indicated, press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select “SLEEP
OFF”, and press the MEMORY button.
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
1
2
Set the sleep time (see left, steps 1 - 5).
Whilst the sleep timer is set, set the timer playback (steps 2 10, pages 31 - 32).
Sleep timer setting
Timer playback setting
1 minute - 3 hours
Sleep operation will
automatically stop.
End time
Desired time
Advanced Features
Sleep operation
Timer playback start time
8
E-34
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Enhancing your system
Listening to the playback sounds of Portable
Audio Player, etc.
The connection lead is not included. Purchase a commercially
available lead as shown below.
Portable audio player, etc.
1
Use a connection lead to connect the Portable Audio
Player etc. to the AUDIO IN socket.
When using video equipment, connect the audio output to this
unit and the video output to a television.
Advanced Features
Audio cable
(not supplied)
E-35
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the AUDIO IN button.
Play the connected equipment.
If volume level of the connected device is too high, sound
distortion may occur. Should this happen, lower the volume of
the connected device.
If volume level is too low, increase the volume of the connected
device.
Note:
To prevent noise interference, place the unit away from the
television.
Auto power on function (AUDIO IN):
When you press any of the following buttons, the unit turns on.
AUDIO IN button (main unit and remote control): The unit turns on
and the “AUDIO IN” function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB).
Headphones
Do not turn the volume on to full at switch on and listen to music
at moderate levels. Excessive sound pressure from earphones
and headphones can cause hearing loss.
Before plugging in or unplugging the headphones, reduce the
volume.
Be sure your headphones have a 3.5 mm (1/8") diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Troubleshooting chart
When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasised bass.
Connect an RCA lead from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT socket.
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
General
Symptom
The clock is not set to the
correct time.
When a button is pressed,
the unit does not respond.
No sound is heard.
Possible cause
Did a power failure occur? Reset
the clock. (Refer page 11)
Set the unit to the power standby mode and then turn it back on.
If the unit still malfunctions, reset
it. (Refer page 37)
Is the volume level set to “0”?
Are the headphones connected?
Are the speaker wires disconnected?
CD player
Subwoofer with a
built-in amplifier
ENGLISH
Symptom
Playback does not start.
Playback stops in the
middle or is not performed
properly.
Playback sounds are
skipped, or stopped in the
middle of a track.
References
Subwoofer connection
XL-UR2180H
XL-UR2380H
XL-UR2580H
Possible cause
Is the disc loaded upside down?
Does the disc satisfy the
standards?
Is the disc distorted or
scratched?
Is the unit located near excessive
vibrations?
Is the disc very dirty?
Has condensation formed inside
the unit?
8
E-36
XL-UR2180H
XL-UR2380H
XL-UR2580H
Troubleshooting chart (continued)
ENGLISH
Condensation
Remote control
Symptom
The remote
control does not
operate.
Possible cause
Is the AC power lead of the unit plugged in?
Is the battery polarity correct?
Are the batteries dead?
Is the distance or angle incorrect?
Does the remote control sensor receive
strong light?
Tuner
References
Symptom
E-37
The radio
makes unusual
noises continuously.
Possible cause
Is the unit placed near the TV or computer?
Is the FM aerial or AM loop aerial placed
properly? Move the aerial away from the
AC power lead if it's located nearby.
USB
Symptom
Possible cause
Device cannot
be detected.
Is there any MP3/WMA file available?
Is the device properly connected?
Is it MTP device?
Does the device contain AAC file only?
Playback does
not start.
Is it the copyright protected WMA file?
Is it the false MP3 file?
Wrong time
display.
Wrong file name
display.
Is Variable Bitrate file being played back?
Recording
cannot start.
Is the USB device in write protect mode?
Is it a CD-WMA disc?
Is the device’s memory already full?
Is the File Name written in Chinese or
Japanese characters?
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit again, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
Factory Reset, Clearing All Memory
1
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
Whilst pressing down the
button, press the CD button until
“CLEAR ALL” appears.
CD
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
Maintenance
Cleaning the cabinet
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
Keep your discs away from direct sunlight, heat, and excessive
moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
YES
Correct
ENGLISH
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
Do not use chemicals for cleaning (petrol, paint thinner, etc.). It
may damage the cabinet finish.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
References
Before transporting the unit
XL-UR2180H
XL-UR2380H
XL-UR2580H
8
E-38
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General (XL-UR2180H)
Power source
Power
consumption
Dimensions
References
Weight
AC 220 - 240 V ~ 50 Hz
Power on: 40 W
Power stand-by: 0.6 W(*)
Width: 180 mm (7-1/6")
Height: 260 mm (10-2/8")
Depth: 273 mm (10-6/8")
4.0 kg (8.8 lbs.)
General (XL-UR2380H)
Power source
Power
consumption
Dimensions
Weight
AC 220 - 240 V ~ 50 Hz
Power on: 53 W
Power stand-by: 0.6 W(*)
Width: 180 mm (7-1/6")
Height: 260 mm (10-2/8")
Depth: 273 mm (10-6/8")
4.2 kg (9.3 lbs.)
General (XL-UR2580H)
Power source
Power
consumption
Dimensions
Weight
AC 220 - 240 V ~ 50 Hz
Power on: 55 W
Power stand-by: 0.6 W(*)
Width: 180 mm (7-1/6")
Height: 260 mm (10-2/8")
Depth: 273 mm (10-6/8")
4.4 kg (9.7 lbs.)
( * )This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 8 to
cancel the demonstration mode.
E-39
Amplifier (XL-UR2180H)
Output power
Output terminals
Input terminals
PMPO: 128 W
MPO: 64 W (32 W + 32 W) (10% T.H.D.)
RMS: 64 W (32 W + 32 W) (10% T.H.D.)
RMS: 40 W (20 W + 20 W) (1% T.H.D.)
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Audio In (audio signal):
250 mV/47 k ohms
Amplifier (XL-UR2380H)
Output power
Output terminals
Input terminals
PMPO: 240 W
MPO: 120 W (60 W + 60 W) (10% T.H.D.)
RMS: 120 W (60 W + 60 W) (10% T.H.D.)
RMS: 72 W (36 W + 36 W) (1% T.H.D.)
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Audio In (audio signal):
250 mV/47 k ohms
Amplifier (XL-UR2580H)
Output power
Output terminals
Input terminals
PMPO: 320 W
MPO: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 160 W (80 W + 80 W) (10% T.H.D.)
RMS: 100 W (50 W + 50 W) (1% T.H.D.)
Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
150 mV/10 k ohms at 70 Hz
Audio In (audio signal):
250 mV/47 k ohms
XL-UR2180H
XL-UR2380H
XL-UR2580H
Type
Single disc multi-play compact disc player
Signal readout
Non-contact, 3-beam semiconductor laser
pickup
D/A converter
D/A Multi-bit converter
Frequency response 20 - 20,000 Hz
Dynamic range
ENGLISH
USB
90 dB (1 kHz)
Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
Support preset
memory
40 presets (AM and FM).
USB host
interface
Complies with USB 1.1 (Full Speed)/
2.0 Mass-Storage-Class.
Supports Bulk only and CBI protocol.
Support file
MPEG 1 Layer 3
WMA (Non DRM)
Bitrate support
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Other
Maximum total number of MP3/WMA files
is 65280.
Maximum total number of folders is 255
INCLUSIVE of root directory. (Folders with
non playable files are also counted.)
The ID3TAG information supported are
TITLE, ARTIST and ALBUM only.
Supports ID3TAG version 1 and version 2.
Maximum number of folders that can be
recorded is 128.
Maximum number of files in a folder that
can be recorded is 128.
File system
support
Supports USB devices with Microsoft
Windows/DOS/FAT 12/ FAT16/ FAT 32.
2 kbyte block length for sector.
References
CD player
8
E-40
XL-UR2180H
XL-UR2380H
XL-UR2580H
ENGLISH
Specifications (continued)
Speaker (XL-UR2180H)
Type
Maximum input power
Rated input power
Impedance
Dimensions
Weight
2-way type speaker system
2.5 cm (1") tweeter
10 cm (4") woofer
60 W
30 W
4 ohms
Width: 148 mm (5-13/16")
Height: 260 mm (10-1/4")
Depth: 175.5 mm (6-15/16")
2.14 kg (4.72 lbs.)/each
References
Speaker (XL-UR2380H)
Type
Maximum input power
Rated input power
Impedance
Dimensions
Weight
E-41
2-way type speaker system
5 cm (2") tweeter
10 cm (4") woofer
120 W
60 W
4 ohms
Width: 148 mm (5-13/16")
Height: 260 mm (10-1/4")
Depth: 198.5 mm (7-13/16")
2.45 kg (5.40 lbs.)/each
Speaker (XL-UR2580H)
Type
Maximum input power
Rated input power
Impedance
Dimensions
Weight
2-way type speaker system
5 cm (2") tweeter
12 cm (4-3/4") woofer
160 W
80 W
4 ohms
Width: 148 mm (5-13/16")
Height: 260 mm (10-1/4")
Depth: 198.5 mm (7-13/16")
2.45 kg (5.40 lbs.)/each
MEMO
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
TINSZA359AWZZ
08E R MW 3
SHARP CORPORATION
03/12/17
XL-UR2180H_BACK.fm