Samsung SID-452 Instruction manual

SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si,
Gyeonggi-do 462-703, Korea
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145
• SAMSUNG OPTO-ELECTRONICS AMERICA,INC.
ELECTRONIC IMAGING DIV.
40 Seaview Drive, Secaucus, NJ 07094, U.S.A
TEL : +1-201-902-0347 FAX : +1-201-902-0429
• SAMSUNG TECHWIN MOSCOW OFFICE
Korp 14, 37-A, PR-KT, Lenningradsky, Moscow 125167, Russia
TEL : +7-95-258-9296,9298 FAX : +7-95-258-9297
•
www.samsungtechwin.com
www.samsungcctv.com
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business
Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
• TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
7 Pingchang Rd, Nankai Dist. Tianjin 300190, P.R China
TEL : +86-22-2761-4724(33821) FAX : +86-22-2761-6514
•
P/No. :6806-0701-01A
VAN 06. 02
HIGH RESOLUTION DAY&NIGHT
THREE-AXIS V/F LENS DOME CAMERA
INSTRUCTION MANUAL
SID-452
About this manual
Please read this manual carefully before installing and using the camera. Be sure to keep the manual handy for later reference.
Thank you for purchasing a SAMSUNG DOME CAMERA.
Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.
SID-452 SERIES
• NTSC MODELS
SID-452N
• PAL MODELS
SID-452P
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
MODEL DESCRIPTION
• SID-452X
_
SIGNAL SYSTEM
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
• SIGNAL SYSTEM
N --> NTSC MODEL
P --> PAL MODEL
INFORMATION -This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
• POWER SOURCE
DC12V/ AC 24V Compatible
WARNING - Changes or modifications not expressly approved by the manufacturer
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
could void the user’s authority to operate the equipment.
WARNING : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
This marking shown on the product or its literature, indicates that it should not be disposed with other
household wastes at the end of its working life. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Contents
6
Features
• LENS (Adjusting to the brightness level)
• SHUTTER (condition and speed control)
20
20
21
22
23
• WHITE BALANCE control
24
• BACKLIGHT (Backlight Compensation)
25
• AGC (Auto Gain Control)
26
• SSNR (Samsung Super Noise reduction)
• SENS-UP
27
28
13
• SPECIAL
29
13
15
• EXIT
34
Precautions
8
Composition
10
Name and Function of Each Section
Installation
Installation
Adjust the panning and tilting, rotating while watching the monitor
11
Connecting to a Monitor
17
18
Connecting to Power
19
Adjusting varifocal lens zoom and focus
COLOR DOME CAMERA
4
User’s Manual
Camera Operation
Menu
Settings
Troubleshooting
35
Specification
37
Dimention
38
COLOR DOME CAMERA
5
User’s Manual
Features
Warning
The camera needs periodic inspection.
Built-in Auto Iris Vari-Focal Lens.
High Sensitivity
The focal length of lens is 3 to 9 mm(F 1.2),
Equivalent to 3X zoom. The built-in lens allow
the camera to have wider dynamic range,
therefore you can use in various applications.
The built-in high sensitivity COLOR CCD enables
a clear image even in 0.002Lux (Sens-Up)
illumination.
Horizontal Resolution 530 TV Lines
Clear image quality has been achieved by
employing a CCD with 410,000 pixel(NTSC),
470,000 pixel(PAL), which provides a
horizontal resolution of 530 TV lines.
Electronic DAY & NIGHT
This camera has a function that electronically
selects the mode that is appropriate for daytime
or night-time conditions. The COLOR mode
operates in daytime conditions to provide
optimum colors, and BW mode operates in
night-time conditions to enhance the definition
of the image.
Stop using your camera when you find a malfunction.
SSNR (Samsung Super Noise
Reduction)
By using built-in SSNR function manufactured
by SAMSUNG TECHWIN, the amount of low
illuminance noise has been significantly
reduced, and the signal-to-noise ratio (S/N)
as well as horizontal resolution have been
improved, resulting in a clear and sharp
image display even in the dark.
Controlled by OSD Menu
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not handle the camera with wet hands
It could cause an electric shock.
Sub Monitor Function
Do not disassemble the camera.
The sub monitor function enables easy
adjustment of the camera angle within the
monitoring range during its installation.
It may result in fire, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
IP66 Approved/ Dust and Rain
Resistant
Additional Functions
With dust and rain resistant design, the
camera can be installed outside under building
eaves or places thatare exposed to the dust
and rain.
SENS-UP, MOTION DETECTION, MIRROR,
SHARPNESS and SYNC(INT/LL) functions
are also available.
COLOR DOME CAMERA
If you use your camera around smoke or unusual heat for a long time, a fire
may be caused.
The camera can be controlled by selecting
text displayed on the monitor screen.
PRIVACY Function
The PRIVACY function conceals the areas
you do not wish to appear on the screen.
Contact an authorized technician for inspection.
6
User’s Manual
It may result in fire or other hazards.
COLOR DOME CAMERA
7
User’s Manual
Precautions
Installation of the camera should be
performed by qualified service personnel only.
As installation of the camera requires experience and
skill, installation without the assistance of qualified
service personnel may result in a risk of fire or electric
shock. Contact our agency for installation.
Do not install the camera in a wet place
or a place that is exposed to fuel or gas.
Stop use immediately if smoke or
unusual heat is detected in the camera.
It may result in fire.
Do not install the camera in an
unstable location.
It may result in malfunction, an electric
shock or fire.
Do not touch the power plug with wet
hands.
Do not install the camera in locations
subject to extreme temperature conditions.
Only use the camera in conditions where
temperatures are between -10°C and
+50°C. Be especially careful to provide
ventilation when operating in high
temperatures.
Do not install the camera in
unstable lighting conditions.
Severe changes in lighting, or flickering,
can cause the camera to work incorrectly.
Do not drop the camera or
subject it to physical shock.
Never face the camera directly
into strong light.
It may fall.
Do not attempt to disassemble it, or
place any foreign objects inside it.
It can cause malfunctions to occur.
Never face the camera directly into
strong light.
It can damage the CCD.
Notes
• If the camera is exposed to spotlight or object reflecting strong light, smear or
blooming may occur.
• Please check that the power satisfies the normal specification before connecting
the camera.
It may result in an electric shock.
COLOR DOME CAMERA
It may result in malfunction and fire.
8
User’s Manual
COLOR DOME CAMERA
9
User’s Manual
Composition
Name and Function of Each Section
1. SID-452
2. Instruction Manual
3. M4 Tapping Screws 4EA
4. M4 Machine Screws 4EA
Pan Base
control panning angle of camera
Rotate Base Holding Screw
fix rotated position
Rotate Base
control rotating angle of camera
5. Adapter plate
COLOR DOME CAMERA
10 User’s Manual
COLOR DOME CAMERA
11 User’s Manual
Installation
Name and Function of Each Section
Pan Base Holding Screws (Color : Silver)
fix panned position
Zoom Handle
adjust zoom between WIDE and TELE
Focus Handle
after adjusting zoom, adjust focus
SETUP button
Used for the menu display. Confirm the status of the selected function.
Left button
Right button
Used when changing item values, by moving the cursor to the left or right on the
menu screen
Up button
Down button
Used when changing item values, by moving the cursor to the up or down on the
menu screen
Service connector for on-site camera set-up
A terminal can be connected to an LCD
monitor, allowing the operator to easily
adjust the camera angle within the monitoring
range during its installation.
Installation
Notes
• The installation should be done by qualified service personnel or sysytem installers.
• If the ceiling material is not strong enough to hold the installation screws, the camera may
fall off. Reinforce the ceiling as needed.
1) Remove the dome cover and shield case from the main body by loosening the
three dome cover screws.
Mounting Bracket
* To install the dome cover on the camera
body, turn the latches in locking direction
as shown in the figure 1.
Main Body (Camera)
Latch
Service/ Monitor Cable
Locking direction
External Viewer (not supplied)
Shield Case
[Figure-1]
Power input jack
Unlocking direction
(Counterclockwise)
Video output jack
Locking
direction
(Clockwise)
Shield Case
Dome cover
Dome cover
2) And then remove the main body from mounting bracket by the four main body screws.
COLOR DOME CAMERA
12 User’s Manual
COLOR DOME CAMERA
13 User’s Manual
Installation
Adjust the panning and tilting, rotating while watching the monitor
When installing on a adapter plate
An arrow for installing directions
adapter plate
M4 tapping screw
(provided)
Camera
body
1) Place the bracket provided on the installation
surface and fix it with the M4 tapping
screws (provided).(Select either 85X85 or
83.5X46)
2) When placing the camera body on the
plate, insert the plate pin into the
mounting hole on the body as shown in
figure-1 and fix it by turning clockwise.
3) When placing the camera body on the
plate, make sure the power and the BNC
cables pass through their respective
designated holes.(When placing the cable
through its side, thread it through the
hole at the bottom.)
4) After installation and adjustment of the
camera are complete, secure the dome
cover by turning it clockwise.
Locking
direction
Unlocking
direction
Plate pin
Dome cover
Locking
direction
Unlocking
direction
• Please locate an arrow on bracket for installing direction that you wish to
observe Area and then fix it with the M4 tapping screws.
COLOR DOME CAMERA
14 User’s Manual
195˚
170˚
Tilt Base
Rotate Base
-170˚
Pan Base
1) You can adjust camera to any direction by using Pan, Tilt, Rotate mechanism.
• Pan Base moves by 170˚ to each side direction and 340˚ on the whole.
• Tilt Base covers total 146˚ angle(73˚ to each side).
• Angle range of Rotate Base is the same as that of Pan Base. But One side range is 195˚
and another is 145˚.
2) Methods of adjustment
•The case of wall installation
After mounting the camera on a wall, adjusting the panning angle so that the camera can
face the direction to monitor when tilting.
And then adjust the tilting angle by rotating the tilt base.
Loosen the rotate base hold screw and adjust rotate base for the best monitoring.
Tighten the rotate base hold screw.
•The case of ceiling installation
[Figure-1]
Notes
73˚
145˚
After mounting the camera on a ceiling, adjusting the panning angle for better monitoring
area by rotating the pan base.
And then adjust the tilting angle by rotating the tilt base.
Notes
• When installing SID-452 be careful in setting lens focus and Tilt angle. If you set the lens focus max
WIDE(f=3.0mm) and Tilt angle over 68˚, some portion of image will be screened by Dome cover.
COLOR DOME CAMERA
15 User’s Manual
Installation
Adjusting varifocal lens zoom and focus
Notes
• When adjusting the rotating angle, loosen rotate base holding screw as following Figure
A. And then tighten it again.
• When adjusting the tilting angle, just grip the tilt base and adjust tilting angle.
• When adjusting the panning angle, loosen pan base holding screws as the following
Figure B. And then tighten them again.
1) Unlock the zoom (or the focus) handle to release it
2) Adjust the zoom (or the focus) handle by moving it to WIDE (NEAR) or TELE
(FAR) position.
3) After adjustment, tighten the zoom (or the focus) handle, taking care that
the adjusted position does not change.
<Figure A>
Focus handle
Zoom handle
<Figure B>
• In case of adjusting the tilting, do not take the lens for preventing physical shocks.
Please take the Tilt Base.
COLOR DOME CAMERA
16 User’s Manual
COLOR DOME CAMERA
17 User’s Manual
Connection
Connecting to a Monitor
Connecting to Power
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
CCTV Camera
Connect the adaptor to the power input connector as shown in the figure below.
The recommended adaptor specification for SID-452N/SID-452P is AC24V, 300mA.
Monitor
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• If necessary, you can connect the monitor to the REMOTE jack on the back of
your camera.
• Only connect the cable when the power is turned off.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate
device.
Intermediate
End monitor
When the resistance value of copper wire is at [20°C(68°F)]
#24(0.22mm2)
#22(0.33mm2)
#20(0.52mm2)
#18(0.83mm2)
Resistance (Ω / m)
0.078
0.050
0.030
0.018
Voltage Drop (V/m)
0.028
0.018
0.011
0.006
Copper wire size (AWG)
•As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
*Standard voltage for camera operation : DC 12V ± 10%
*There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Notes
• Be sure to connect power only after all the installation is complete.
• Note that AC or DC adaptor is not supplied with camera.
• Use the UL listed, class 2 power transformer of AC 24V adaptor.
• Ground should be connected to the GND terminal.
CCTV Camera
COLOR DOME CAMERA
18 User’s Manual
COLOR DOME CAMERA
19 User’s Manual
Camera Operation
Menu
Settings
Settings can be made using the 5 buttons located on the back of the camera.
SETUP menu
LENS (Adjusting to a lens)
· DC
SHUTTER (Conditon and speed control) · FLK
WHITE BALANCE control
· ATW
· AWC
· MANUAL
BACKLIGHT
(Backlight compensation)
· OFF
· LOW
· MIDDLE
AGC (Auto Gain Control)
· OFF
SETUP button
· HIGH
· LOW
· MIDDLE
· LOW
· MIDDLE
· HIGH
SSNR
(Samsung super noise reduction)
· OFF
SENS-UP (Low illuminance)
· OFF
SPECIAL
· CAMERA ID
· COLOR
· SYNC
· MOTION DET
· PRIVACY
· MIRROR
· SHARPNESS
· RESET
DOWN button
1. Please press the SETUP button
• Settings can now be made. The SETUP menu is displayed on the monitor.
· HIGH
· RETURN
EXIT
COLOR DOME CAMERA
LEFT button RIGHT button UP button
20 User’s Manual
· AUTO(X2~X128)
2. Please select any function you wish to activate by using the UP and DOWN
buttons.
• The arrow can be moved up or down by using the UP and DOWN buttons.
Please position the arrow to point to the function you wish to operate.
COLOR DOME CAMERA
21 User’s Manual
Camera Operation
2. Using the SETUP button, you can control the brightness of the screen.
Select any function you
wish to operate by
using the UP and
DOWN buttons.
Modes can be changed
using the LEFT and
RIGHT buttons.
3. Please press the LEFT or RIGHT button if you wish to change mode.
• When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode
you wish to operate.
4. Please select 'EXIT' and then press the SETUP button to finish the setting.
Notes
• If appears at the mode you wish to operate, it means that there is a submenu which can be selected by pressing the SETUP button.
• If---appears at the mode item, it means that there is no mode available to be
selected.
Notes
• The brightness of the screen can be adjusted within the
range of 1~70. The optimum level of brightness for the
user can be achieved by adjustment.
3. Please press the SETUP button if you wish to return to the previous menu.
SHUTTER (condition and speed control)
Because of using the DC lens, the shutter speed is fixed at 1/60.
1. When the SETUP menu is on the screen, please position the arrow to point
to 'SHUTTER' by using the DOWN button.
2. Please select the shutter mode by pressing the LEFT or RIGHT button.
FLK: Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency. NTSC Model:1/100, PAL
MODEL: 1/120
LENS(Adjusting to the brightness level)
This function is used to adjust the brightness of the screen.
1. When the SETUP menu is displayed on the screen, please position the arrow
to point to 'LENS' by using the UP and DOWN buttons.
3. Please press the SETUP button when all the settings are complete.
COLOR DOME CAMERA
22 User’s Manual
COLOR DOME CAMERA
23 User’s Manual
Camera Operation
WHITE BALANCE control
BACKLIGHT (Backlight Compensation)
The screen color can be adjusted by using the WHITE BALANCE function.
1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
When there is a strong backlight behind the object, clear images of the background
as well as the object can still be obtained by using the BACKLIGHT function.
1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button.
*Please select one of the 3 modes below.
ATW(Auto Tracking White Balance): This mode can be used within the color
temperature range 1,800°K ~ 10,500°K (Ex. fluorescent light, outdoor, sodium
vapor lamp or inside tunnels)
AWC(Auto White Balance Control): Please press the SETUP button while the
camera is directed at a piece of white paper to obtain the optimum state under
current illumination. If the environment including the light source is changed, you
have to adjust the white balance again.
MANUAL: The manual adjustment mode enables finer adjustment. Please select
ATW or AWC first. Please change to manual adjustment mode and press the SETUP
button. Please set the appropriate color temperature, and then increase or decrease
the red and blue color values while monitoring the color changes on the object.
HIGH/MIDDLE/LOW: You can adjust the sensitivity of Backlight Compensation.
OFF: BACKLIGHT function does not operate.
Notes
•Under the following conditions the WHITE BALANCE function may not operate
properly. In such cases, please select the AWC mode.
When the object’s surroundings have a very high color temperature (Ex. a clear sky and sunset)
When the object’s surroundings are dark
If the camera directly faces a fluorescent light or is installed in a place where there are
considerable changes in illumination, the WHITE BALANCE function may become unstable.
COLOR DOME CAMERA
24 User’s Manual
BACKLIGHT ON
COLOR DOME CAMERA
BACKLIGHT OFF
25 User’s Manual
Camera Operation
AGC (Auto Gain Control)
SSNR (Samsung Super Noise reduction)
1. Please position the arrow to point to 'AGC' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT
button. As the level of gain increases, the screen gets brighter and the level
of noise also increases.
The background noise in the low light level decreases automatically as the level
of gain changes.
1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the
UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
HIGH: The gain increases or decreases within the range of 6dB ~ 34dB.
MIDDLE: The gain increases or decreases within the range of 6dB ~ 30dB.
LOW: The gain increases or decreases within the range of 6dB ~ 18dB.
OFF: The gain is fixed at 6dB.
3. Please press the SETUP button. The BRIGHTNESS can be adjusted within the
range of 1~70.
OFF: There is no reduction in noise level.
LOW: There is a small reduction in noise level with almost no ghost image.
MIDDLE: The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
HIGH: The level of noise is reduced greatly, however there is an increase in ghost
imaging.
Notes
• When AGC is turned off, SSNR does not operate.
4. Please press the SETUP button when all the settings are complete.
COLOR DOME CAMERA
26 User’s Manual
COLOR DOME CAMERA
27 User’s Manual
Camera Operation
SENS-UP (Low illuminance)
SPECIAL
SENS-UP helps maintain a bright, clear screen image by automatically detecting
changes in the level of light in low light level conditions.
1. Please position the arrow to point to 'SENS-UP' on the SETUP menu by
using the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
AUTO: Low light level auto mode
1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using
the UP and DOWN buttons.
2. Please select the mode you wish to operate by pressing the UP or DOWN
button.
OFF: The function does not operate.
Notes
• When SHUTTER is in the manual mode, SENS UP does not operate.
CAMERA ID: If the ID is input, the camera ID appears on the monitor.
1) Please position the arrow to point to 'CAMERA ID' by using the UP or DOWN
button.
2) Please select 'ON' by pressing the LEFT or RIGHT button.
3. Please press the SETUP button when all the settings are complete.
Notes
•If 'OFF' is selected, the ID does not appear
on the monitor even if it has been input.
Notes
•The maximum storage magnification in low light level can be adjusted by pressing
the SETUP button in 'AUTO' mode.(X2~X128)
•As the magnification increases, the screen gets brighter; moving object gets more
afterimage.
•If storage magnification is increased while SENS UP is operating, it may cause noise,
and spots may appear; however this is normal.
COLOR DOME CAMERA
28 User’s Manual
COLOR DOME CAMERA
29 User’s Manual
Camera Operation
3) Please press the SETUP button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
4) Up to 15 letters can be used for the ID.
Please move the cursor to the letter you wish to choose by using the UP and
DOWN button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
Select an ID from A, B~Y, Z, a, b~y, z, 0,1~8, 9 by using the UP, DOWN, LEFT
and RIGHT buttons.
Please lock in the letters by using the SETUP button.
•When the letter is locked in, the cursor moves to the next space.
Please repeat the above to input the ID.
5) When a name has been chosen, please select a position for the name display.
Please move the cursor onto 'POS' and then press the SETUP button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
-.
123456789
CLR POS END
The name will appear at the top left hand
corner.
FRONT DOOR
to Locate, then SET
Please find the position you wish to display the
name by using the 4 directional buttons,
and then press the SETUP button.
FRONT DOOR
to Locate, then SET
Notes
•If the wrong name has been input.....
If you press the SETUP button after moving the cursor to CLR, all the letters will be
erased. If you want to correct a letter, please move the cursor to the arrow at the
bottom left of the screen and press 'SET'.Please position the cursor above the letter
you wish to correct, and then move the cursor onto the letter you wish to choose
and press the SETUP button.
COLOR DOME CAMERA
30 User’s Manual
6) Please select 'END' and then press the SETUP button to complete ID input.
COLOR (Electronic DAY & NIGHT)
- AUTO: This camera has a function which electronically changes to the appropriate
mode for daytime or night-time. The COLOR mode is operated for daytime,
and it converts to BW mode for night-time.
- ON: The color mode is selected electronically.
COLOR DOME CAMERA
31 User’s Manual
Camera Operation
Notes
•If AGC is OFF, you can’t select AUTO mode.
•When an infrared light is used, there may be a problem with focusing and COLOR
(DAY & NIGHT).
• Please select the area you wish to observe from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be observed by using the UP, DOWN, LEFT
or RIGHT button.
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
LINE-LOCK. In LINE-LOCK mode, it synchronizes the video signal between
cameras without a synchronous generator. The line-lock synchronization is only
used in the areas of 60Hz (NTSC Models) / 50Hz (PAL
Models).
- INT : Internal synchronization
- LL : External line-lock synchronization
• If you choose ‘LL’, you can adjust the desired phase. Press
the SET button.
• You can adjust the desired phase from 0 to 359.
Notes
•Please press the SETUP button to save the changes and complete the setting.
Notes
•There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
• When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models).
• When the power frequency is 60Hz, you can not use the line-lock mode (PAL Models).
• ‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
PRIVACY: This modes conceals the areas you do not wish to appear on the screen.
- OFF : Cancels the PRIVACY mode.
- ON : Operates the PRIVACY mode.
•Please press the SETUP button.
MOTION DETECTION:
This product has a feature that allows you to observe movements of objects in 4
different areas on the screen, and the words 'MOTION DETECTED' appear on the
screen when movement is detected; hence a single individual can conduct
supervision efficiently. The camera detects an object's movement by sensing
disparity of outline, and level of brightness and color.
• Please press the SETUP button.
- OFF : MOTION DETECTION mode is cancelled.
- ON : Any motion in the selected areas is observed.
•Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
•Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or
RIGHT button.
COLOR DOME CAMERA
32 User’s Manual
COLOR DOME CAMERA
33 User’s Manual
Troubleshooting
Camera Operation
MIRROR
- ON : Sets a horizontal image inversion.
- OFF : Cancels the inversion.
If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
MIRROR ON
Solution
Nothing appears on
the screen.
• Please check the power connection.
• Please check the video signal line connection.
• Please check the Brightness of Auto Iris lens.
The video image is
not clear.
• Please check if the lens is clean. Please clean the
lens with a clean cloth or brush.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed
directly to a bright light. Please move the camera if
necessary.
The screen is dark.
• Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/
Hi-z properly, and check the terminals. (refer to
page 18)
• Please adjust the brightness level of the Auto Iris
lens.
• If you take the focus of the lens, adjust the focus
lever of the lens.
There is a problem with
the camera operation.
The camera surface is
too hot and black
stripes appear on the
screen.
• Please check if an appropriate power source to the
camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.
MIRROR OFF
SHARPNESS: The outline of the video image becomes cleaner and more distinctive
as the level of SHARPNESS increases. If the level goes up excessively,
however, it may affect the video image and generate noise.
•Please press the SETUP button.
•The available range of level is 0 ~ 31.
RESET: Returns to the level which was set by the manufacturer for shipment.
RETURN: Returns to the SETUP menu.
EXIT
Saves all the setting menus and then exits.
COLOR DOME CAMERA
34 User’s Manual
COLOR DOME CAMERA
35 User’s Manual
Specifications
Troubleshooting
Problem
Solution
The MOTION
DETECTION function
is not working.
• Please check if 'MOTION DETECTION' mode is
turned on.
• Please check if the MD LEVEL is too low.
• Please check the setting of the MD AREA.
Colors are not quite
right.
• Please check the 'WHITE BAL' setting. (Please refer
to page 24)
The screen is flickering.
• Please check if the camera is facing directly into
sunlight or fluorescent light.
L/L mode isn't able to
be selected.
• Have you connected your camera to DC power
source? Connect it to AC power source.
L/L mode is not
available.
• When using DC 12V input power, 'Sync' mode is
fixed to 'INT'.
COLOR (DAY & NIGHT)
mode is not working.
• Please check if the AGC menu is set to the OFF
position.
SENS-UP function is
not working.
• Please check if the AGC menu is set to the OFF
position.
• Please check the limit of SENS-UP AUTO mode.
ITEM
POWER
Total Pixels
C
C
Effective Pixels
D
Sensor
Scanning System
S
y
Synchronization
n
c.
Frequency
LENS TYPE
L
Max. Aperture Ratio
E
Pan
N
Monitoring Tilt
S
Angle
Rotation
Resolution
Video Output
COLOR DOME CAMERA
36 User’s Manual
E
L
E
C
T
R
I
C
A
L
S/N (Y signal)
Min. Illumination
COLOR(DAY&NIGHT)
White Balance
Backlight
Electronic shutter speed
Sens-Up
O.S.D
Motion Detection
SSNR
MIRROR
Privacy Function
Sharpness
Operating
Temperature/Humidity
Dimension
Weigh
SID-452N
SID-452P
AC24V ±10%/DC12V ±10% Max3.0W
811(H) x 508(V)
795(H) x 596(V)
768(H) x 494(V)
752(H) x 582(V)
1/3 inch Super HAD CCD
2:1 Interlace
Internal
Horizontal: 15.734KHz Vertical: 59.94 Hz Horizontal: 15.625 KHz Vertical: 50Hz
3X Vari-focal Lens (F1.2 f3~9mm)
1:1.2~2.1
- 170˚ ~ +170˚
-75˚ ~ +75˚
- 170˚ ~ +170˚
530 TV Lines(Min.)
1.0Vp-p/75Ω
1.0Vp-p/75Ω
(Video 0.714Vp-p Sync 0.286Vp-p)
(Video 0.7 Vp-p Sync 0.3 Vp-p)
50 dB (AGC Off / Weight ON)
0.3 Lux / F1.2, 0.002Lux(SENS-UP X128)
ON/AUTO(Daytime:COLOR, Night time: BW) Selectable
ATW/AWC/Manual (1800˚K~10,500˚K)
LOW/MIDDLE/HIGH/OFF Selectable
Fixed (1/60 or Flickerless Mode)
Fixed (1/50 or Flickerless Mode)
OFF/AUTO (selectable limit X2~X128)
Built-in
OFF/ON(4 Programmable Zone)
LOW / MIDDLE / HIGH / OFF Selectable (Noise Control)
OFF/ON (Horizontal Image Inversion)
OFF/ON(4 Programmable Zone)
OFF/ON(Level Adjustable)
-10˚C~ +50˚C / 30 to 80% RH
COLOR DOME CAMERA
Ø130 x 105mm(H)
670g
37 User’s Manual
DECLARATION OF CONFORMITY
Dimension
Application of Council Directive(s)
Ø130
89 / 336 / EEC
Manufacturer's Name
SAMSUNG TECHWIN CO., LTD
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-716
European Representative Name
European Representative Address
105mm
Equipment Type/Environment
CCTV Camera
Model Name
SID-452P
Beginning Serial NO.
S6020001
Year of Manufacture
2006. 02. 01
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
SAMSUNG TECHWIN CO., LTD
Legal Representative in Europe
Full Name
YOUNG TAEK SON
Full Name
Position
QUALITY CONTROL MANAGER
Position
Place
CHANGWON, KOREA
Place
Date
2006. 02. 01
Date
Manufacturer
Signature
108mm
COLOR DOME CAMERA
38 User’s Manual
Signature