Philips 32PFL5403/78 User manual

Register your product and get support at
www.philips.com/welcome
52PFL7803
42PFL7803
42PFL7603
52PFL7403
42PFL7403
52PFL5403
47PFL5403
42PFL5403
32PFL5403
42PFL5203
32PFL5203
42PFL3403
32PFL3403
EN
USER MANUAL
ZH
用户手册
TH
คูมือผูใช
VI
Hướng dẫn Sử dụng
AR
Downloaded From TV-Manual.com Manuals
Downloaded From TV-Manual.com Manuals
1
Important . . . . . . . . . . . . . . . . . . . . . 3
1.1
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2
Screen care . . . . . . . . . . . . . . . . . . . . . . . 4
1.3
Environmental care. . . . . . . . . . . . . . . . . 4
2
2.1
3
Your TV . . . . . . . . . . . . . . . . . . . . . . . 5
TV overview . . . . . . . . . . . . . . . . . . . . . . 5
5.7
Use timers and child lock . . . . . . . . . . 22
5.8
Use Demo mode . . . . . . . . . . . . . . . . . 24
6
Install channels . . . . . . . . . . . . . . . . 26
6.1
Automatically install channels . . . . . . . 26
6.2
Manually install channels . . . . . . . . . . . 26
6.3
Manage channels. . . . . . . . . . . . . . . . . . 27
6.4
Change to Shop or Home mode . . . . . 29
7
Connect devices . . . . . . . . . . . . . . . 30
Get started . . . . . . . . . . . . . . . . . . . . 7
7.1
Connection overview . . . . . . . . . . . . . . 30
3.1
Position the TV . . . . . . . . . . . . . . . . . . . . 7
7.2
Select connection quality . . . . . . . . . . . 31
3.2
Wall mount the TV. . . . . . . . . . . . . . . . . 7
7.3
Connect devices . . . . . . . . . . . . . . . . . . 32
3.3
Connect the antenna cable . . . . . . . . . . 9
7.4
Setup devices . . . . . . . . . . . . . . . . . . . . 34
3.4
Connect the mains cord . . . . . . . . . . . . 9
3.5
Manage cables. . . . . . . . . . . . . . . . . . . . 10
3.6
Insert the remote control batteries . . 10
3.7
Switch on the TV . . . . . . . . . . . . . . . . . 10
3.8
Select your location . . . . . . . . . . . . . . . 10
3.9
Re-select your location . . . . . . . . . . . . 10
8
8.1
9
Use your TV as PC monitor . . . . . . 35
Configure PC mode . . . . . . . . . . . . . . . 35
Use your TV in High Definition (HD)
mode . . . . . . . . . . . . . . . . . . . . . . . . 36
9.1
Configure HD mode . . . . . . . . . . . . . . 36
9.2
Configure the TV in HD mode . . . . . . 36
Use your TV . . . . . . . . . . . . . . . . . . 11
9.3
Display in native 1080 mode . . . . . . . . 37
4.1
Switch your TV on/off or to standby . . 11
9.4
Supported formats . . . . . . . . . . . . . . . . 37
4.2
Watch TV . . . . . . . . . . . . . . . . . . . . . . . 11
4.3
Watch connected devices . . . . . . . . . . 12
4.4
Use teletext . . . . . . . . . . . . . . . . . . . . . 12
11 Technical data . . . . . . . . . . . . . . . . . 39
4.5
Use Ambilight . . . . . . . . . . . . . . . . . . . 13
12 Troubleshooting . . . . . . . . . . . . . . . 40
Use more of your TV . . . . . . . . . . . 14
12.1 General TV issues . . . . . . . . . . . . . . . . 40
5.1
Remote control overview . . . . . . . . . . 14
12.2 Picture issues . . . . . . . . . . . . . . . . . . . . 40
5.2
Use TV menus . . . . . . . . . . . . . . . . . . . 16
12.3 Sound issues . . . . . . . . . . . . . . . . . . . . . 40
5.3
Adjust picture and sound settings . . . . 17
12.4 HDMI connection issues . . . . . . . . . . . 41
5.4
Adjust Ambilight settings . . . . . . . . . . . 20
12.5 PC connection issues . . . . . . . . . . . . . 41
5.5
Use advanced teletext features . . . . . . 20
12.6 Contact us . . . . . . . . . . . . . . . . . . . . . . 41
5.6
Create a surf list . . . . . . . . . . . . . . . . . 22
4
5
Downloaded From TV-Manual.com Manuals
10 Use Philips EasyLink . . . . . . . . . . . . 38
EN-1
EN
Table of contents
2007 © Koninklijke Philips Electronics N.V. All rights
reserved. Specifications are subject to change without
notice. Trademarks are the property of Koninklijke
Philips Electronics N.V. or their respective owners.
to anticipate further developments in standardisation
for early integration in its products.
Copyright
Philips reserves the right to change products at any
time without being obliged to adjust earlier supplies
accordingly.
The material in this manual is believed adequate
for the intended use of the system. If the product,
or its individual modules or procedures, are used
for purposes other than those specified herein,
confirmation of their validity and suitability must be
obtained. Philips warrants that the material itself does
not infringe any United States patents. No further
warranty is expressed or implied.
Warranty
No components are user-serviceable. Do not open or
remove covers to the inside of the product. Repairs
may only be done by Philips Service Centres and
official repair shops. Failure to do so shall void any
warranty, stated or implied. Any operation expressly
prohibited in this manual, any adjustments, or assembly
procedures not recommended or authorised in this
manual shall void the warranty.
Pixel characteristics
This LCD product has a high number of colour pixels.
Although it has effective pixels of 99,999% or more,
black dots or bright points of light (red, green or blue)
may appear constantly on the screen. This is a structural
property of the display (within common industry
standards) and is not a malfunction.
Compliance with EMF
Koninklijke Philips Electronics N.V.
manufactures and sells many products targeted at
consumers, which, like any electronic apparatus,
in general have the ability to emit and receive
electromagnetic signals.
One of Philips’ leading Business Principles is to take all
necessary health and safety measures for our products,
to comply with all applicable legal requirements and
to stay well within the EMF standards applicable at the
time of producing the products.
Philips is committed to develop, produce and market
products that cause no adverse health effects.
Philips confirms that if its products are handled
properly for their intended use, they are safe to use
according to scientific evidence available today.
Philips plays an active role in the development of
international EMF and safety standards, enabling Philips
Downloaded
From TV-Manual.com Manuals
EN-2
VESA, FDMI and the VESA Mounting Compliant logo
are trademarks of the Video Electronics Standards
Association.
Manufactured under license from BBE Sound, Inc.
Licensed by BBE, Inc under one or more of the
following US patents: 5510752,5736897. BBE and BBE
symbol are registered trademarks of BBE Sound Inc.
® Kensington and Micro Saver are registered US
trademarks of ACCO World Corporation with
issued registrations and pending applications in other
countries throughout the world. All other registered
and unregistered trademarks are the property of their
respective owners.
Important
If liquids are spilt on the TV, do not operate
the TV. Immediately disconnect the TV from
the mains and have the TV checked by a
qualified technician.
Congratulations on your purchase and
welcome to Philips!
•
To avoid risk of fire or electric shock, do
not place the TV, remote control or remote
control batteries near naked flame sources
(e.g. lighted candles) and other heat sources
including direct sunlight.
•
Do not install the TV in a confined space
such as a bookcase. Leave a space of at
least 10cm (four inches) around the TV
for ventilation. Be sure air flow is not
obstructed.
•
If placing the TV on a flat, solid surface be
sure to use only the supplied stand. Do not
move the TV if the stand is not properly
screwed to the TV.
•
Wall mounting of the TV should only be
performed by qualified personnel. The TV
must only be mounted on an appropriate
wall bracket and on a wall that can safely
hold the weight of the TV. Improper wall
mounting can result in severe injury or
damage. Do not attempt to wall mount the
TV yourself.
•
Two people are required to lift and carry
a TV that weighs more than 25 kg (55lb).
Improper handling of the TV can result in
serious injury.
If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections and cause arcing or fire.
•
If transporting the TV in low temperatures
(less than 5°C), open the box and wait until
the TV matches the ambient temperature
of the room before unpacking.
Disconnect the TV from the mains and
antenna before lightning storms. During
lightning storms do not touch any part of
the TV, mains cord or antenna cable.
•
•
To avoid short circuit, do not expose the
TV, remote control or remote control
batteries to rain or water.
Be sure that you have full access to the
mains cord for easy disconnection of the
TV from the mains.
•
When disconnecting the TV from the mains,
be sure to:
•
Do not place vessels of water or other
liquids on top of or near the TV. Spilling
liquids on the TV can cause electric shock.
Read this user manual before you start to use
this product.
Pay close attention to this section and follow
the safety and screen care instructions. The
product warranty does not apply if damage is
caused by failing to follow these instructions.
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.
The model and serial number of your TV can
be found on the back and side of the TV as well
as on the packaging.
1.1
•
•
Safety
Downloaded From TV-Manual.com Manuals
• Turn off the TV, then the mains power (if
available).
EN-3
EN
1
• Unplug the mains cord from the mains
socket outlet.
• Unplug the mains cord from the power
connector at the back of the TV.
Always pull the mains cord by the plug.
Do not pull the mains cord.
•
Where possible, avoid stationary images
that remain on-screen for extended periods
of time. Examples include screen menus,
teletext pages, black bars or stock market
tickers. If you must use stationary images,
reduce the screen contrast and brightness
to avoid screen damage.
1.3
Environmental care
Recycling your packaging
The packaging of this product is intended to
be recycled. Contact your local authorities for
information on how to recycle the packaging.
Disposing your used product
•
Permanent hearing loss may occur if you
use earphones or headphones at high
volumes. Though high volume may sound
normal over time, it can damage your
hearing. To protect your hearing, limit the
amount of time you use earphones or
headphones at high volume.
1.2
•
Screen care
Turn off and unplug the mains cord before
cleaning the screen. Clean the screen with a
soft, dry cloth. Do not use substances such
as household cleaning agents as these may
damage the screen.
Your product is manufactured with high-quality
materials and components that can be recycled
and reused. When you see the crossed-out
wheel bin symbol attached to a product, it
means the product is covered by the European
Directive 2002/96/EC:
Do not dispose your used product with
household waste. Ask your dealer for
information on how to safely dispose of the
product. Uncontrolled waste disposal harms
both the environment and human health.
Disposing used batteries
The supplied batteries do not contain
mercury or cadmium. Dispose supplied and all
other used batteries according to your local
regulations.
Power consumption
•
To avoid deformations or colour fading,
wipe off water droplets as soon as possible.
•
Do not touch, push, rub or strike the
screen with hard objects as this may
damage the screen permanently.
Downloaded
From TV-Manual.com Manuals
EN-4
The TV consumes minimal energy in standby
mode to minimise environmental impact. Active
power consumption is displayed at the back of
the TV.
For more product specifications, see the
product leaflet at www.philips.com/support.
Your TV
Back connectors
EN
2
This section gives you an overview of
commonly-used TV controls and functions.
2.1
TV overview
HDMI 1
HDMI 2
AUDIO IN
HDMI 3
VGA
SERV. C
R
L
Y
Pb
75X
Side controls and indicators
TV ANTENNA
VIDEO
Pr
L
R
CVI
VOLUME
MENU
CHANNEL
VIDEO
L
L
R
R
AV OUT
AV IN
4
3
Use the TV back connectors to connect to the
antenna and permanent devices such as a highdefinition disc player, DVD player or VCR.
2
D Note
For more information about TV
connections, see Section 7 Connect devices.
1
POWER
5
1. POWER
2. CHANNEL +/3. MENU
4. VOLUME +/5. Standby indicator / Remote control sensor
Side connectors
Use the TV side connectors to connect to
mobile devices such as a camera or highdefinition game console. You can also connect
a pair of headphones.
Downloaded From TV-Manual.com Manuals
EN-5
Remote control
1. POWER
2. TELETEXT
3. SOURCE
1
2
3
4
5
4. AMBILIGHT
5. COLOUR KEYS
From left: red, green, yellow, blue
6. NAVIGATION KEYS
Up Î, Down ï, Left Í, Right Æ, OK
7. MENU
8. CHANNEL +/9. VOLUME +/-
6
7
8
9
Downloaded
From TV-Manual.com Manuals
EN-6
For more information about the remote
control, see Section 5.1 Remote control overview.
Get started
This section helps you position and install the
TV and supplements the information provided
in the Quick Start Guide.
If necessary, refer to the Quick Start Guide for
stand mounting instructions.
3.1
Position the TV
In addition to reading and understanding the
safety instructions in Section 1.1, consider the
following before positioning your TV:
•
The ideal viewing distance for watching TV
is three times its screen size.
•
Position the TV where light does not fall
directly on the screen.
•
Connect your devices before you position
your TV.
•
Your TV is equipped with a Kensington
Security Slot at the back of the TV.
3.2
Wall mount the TV
B WARNING
Wall mounting of the TV should only
be performed by qualified installers.
Koninklijke Philips Electronics N.V. bears no
responsibility for improper mounting that
results in accident or injury.
Step 1 Purchase a VESA-compatible wall
bracket
Depending on the size of your TV screen,
purchase one of the following wall brackets:
TV screen
size
(inches/
cm)
VESAcompatible
wall bracket
type
(millimeters)
Special
instructions
32”/82 cm
Adjustable
300 x 300
The VESAcompatible
bracket must
be adjusted
to 200 x
300 before
securing to
the TV
42”/107 cm
or larger
Fixed 400 x 400 None
If connecting an anti-theft Kensington lock
(not supplied), position the TV within reach
of a permanent object (such as a table) that
can be easily attached to the lock.
•
For the best Ambilight effect, position the
TV 10cm (four inches) to 20cm (eight
inches) away from the wall. Ambilight also
works best in a room with dim lighting.
Downloaded From TV-Manual.com Manuals
EN-7
EN
3
Step 2 Remove the TV stand
Step 3 Connect cables
D Note
These instructions are only applicable to
TV models with mounted stands. If your TV
stand is not mounted, skip to Step 3 Connect
cables.
Connect the antenna cable, mains cord and
all other devices to the back of the TV as
described in the following sections and in
Section 7 Connect devices.
1. Carefully place the TV face down on a
flat, stable surface that is covered by soft
cloth. The cloth should be thick enough to
protect your screen.
Step 4 Secure the VESA-compatible wall
bracket to the TV
2. Using a cross-head screwdriver (not
supplied), unscrew the four screws that
secure the stand to the TV.
3. Firmly pull the stand from the bottom of
the TV. Place both the stand and screws in a
secure location for future reinstallation.
Downloaded
From TV-Manual.com Manuals
EN-8
B WARNING
Use bolts (M6 for 32 inch models, M8 for
all other models) and spacers to secure the
VESA-compatible wall bracket to your TV.
D Note
Depending on your VESA-compatible wall
bracket, you may need to separate the
mounting plate from the wall bracket for
easier installation. Refer to your VESAcompatible wall bracket documentation for
instructions.
1. Locate the four mounting nuts at the back
of the TV.
3.4
Connect the mains cord
B WARNING
Verify that your mains voltage corresponds
with the voltage printed at the back of the
TV. Do not insert the mains cord if the
voltage is different.
3.4.1. To connect the mains cord
D Note
The location of the mains connector varies
according to TV model.
x4
3. Continue with the instructions provided
with your VESA-compatible wall bracket.
3.3
Connect the antenna cable
HDMI 1
HDMI 2
AUDIO IN
HDMI 3
VGA
SERV. C
R
L
Y
Pb
75X
TV ANTENNA
VIDEO
Pr
VIDEO
L
L
L
R
R
R
CVI
AV OUT
1. Locate the AC IN mains connector at the
back or on the bottom of the TV.
AV IN
2. Connect the mains cord to the AC IN
mains connector.
3. Connect the mains cord to the mains,
ensuring that the cord is tightly secured at
both ends.
1. Locate the TV ANTENNA connector at
the back of the TV.
2. Connect one end of the antenna cable
(not supplied) to the TV ANTENNA
connector. Use an adaptor if the antenna
cable does not fit.
3. Connect the other end of the antenna
cable to your antenna outlet, ensuring that
the cable is tightly secured at both ends.
Downloaded From TV-Manual.com Manuals
EN-9
EN
2. Align the plate/bracket to the four
mounting nuts, placing the supplied
spacers between the plate/bracket and the
mounting nuts.
Using a spanner or cross-head screwdriver,
insert the supplied bolts through the plate/
bracket and spacers, tightly securing the
bolts to the mounting nuts.
3.5
Manage cables
Route your mains cord, antenna cable and all
other device cables through the cable holder at
the back of the TV. This holder helps keep your
cables tidy and easily manageable.
3.7
Switch on the TV
The first time you switch on the TV, check that
the mains cord is properly connected. When
ready, turn on the mains, then press POWER
on the side of the TV.
3.8
Select your location
The first time and only the first time when
you switch on the TV, an on-screen display will
prompt you to select a location. The location
settings is to maximise your viewing pleasure
depending on your environment at home or at
the shopfloor.
Location
Home
Shop
3.6
Please select location
to continue
Insert the remote control
batteries
4. Press Î or ï a location.
5. Press OK to confirm your choice.
1. Slide the battery cover off the back of the
remote control.
2. Insert the two supplied batteries. Be sure
the + and - ends of the batteries line up
with the markings inside the case.
3. Slide the cover back into position.
D Note
Remove the batteries if not using the
remote control for an extended period of
time.
Downloaded
EN-10 From TV-Manual.com Manuals
3.9
Re-select your location
If you wish to re-select your location, see
Section 6.4 Change to Shop or Home mode.
4
Use your TV
4.1.4. Switch on the TV from standby
4.1
Switch your TV on/off or to
standby
•
4.1.1. Switch on your TV
MENU
CHANNEL
POWER
If the standby indicator is on (red), press .
POWER on the remote control.
D Note
If you cannot locate your remote control
and you want to switch on the TV from
standby, press CHANNEL + or - on the
side of the TV.
VOLUME
Power
indicator
•
EN
This section helps you perform basic TV
operations. Instructions on advanced TV operations are provided in Section 5 Use more of your
TV.
Press POWER on the side of the TV.
An indicator light comes on.
4.2
Watch TV
4.2.1. Switch channels
4.1.2. Switch off your TV
• Press POWER on the side of the TV.
The indicator light switch off.
4.1.3. Switch your TV to standby
•
Press . POWER on the remote control.
E Tip
Though your TV consumes very little power
when in standby, energy continues to be
consumed as long as the mains remain
connected and powered. When not in use
for extended periods of time, switch off and
disconnect the TV from the mains.
Downloaded From TV-Manual.com Manuals
•
Press a number (0 to 99) or press CH +/on your remote control.
•
Press CHANNEL +/- on the side controls
of the TV.
•
Press A/CH on the remote control to
return to the previously viewed TV channel.
EN-11
4.2.2. Adjust volume
• Press CH +/- or Î/ï to view the
next or the previous page.
• Press a colour key to select one of the
colour coded items at the bottom of the
screen.
3. Press ¤ again to switch off teletext.
•
Press VOLUME + or - on the remote
control.
•
Press VOLUME + or - on the side
controls of your TV.
•
Press
on the remote control to mute
the sound. Press
again to unmute on the
sound.
4.3
Watch connected devices
1. Switch on the device.
2. Press SOURCE on the remote control
then select the input your device is
connected to.
3. Press OK to select the device.
4.4
Use teletext
Most TV channels broadcast information via
teletext.
1. Press ¤ on the remote control.
The main index page appears.
2. To select a page with the remote control:
• Enter the page number with the number
keys.
Downloaded
EN-12 From TV-Manual.com Manuals
For more information on teletext, see Section
5.5 Use advanced teletext features.
4.5
Use Ambilight
EN
D Ambilight is not available in all models.
Ambilight is an innovative Philips feature that
adds reactive ambiant lighting to your viewing
experience.
1. Press AMBILIGHT on the remote
control. Ambilight turns on.
2. Press AMBILIGHT again to turn off
Ambilight.
For more information on Ambilight, see Section
5.4 Adjust Ambilight settings.
E Tip
A dimly lit room is ideal for a complete
Ambilight experience.
Downloaded From TV-Manual.com Manuals
EN-13
5
Use more of your TV
This section helps you perform advanced TV
operations, including how to:
•
Use the TV menus (Section 5.2)
•
Adjust picture and sound settings
(Section 5.3)
•
Adjust Ambilight settings (Section 5.4)
•
Use advanced teletext features (Section 5.5)
•
Create a surf list (Section 5.6)
•
•
5.1
Remote control overview
This section provides a detailed overview of
remote control features.
1
23
22
2
3
4
Use timers and child lock (Section 5.7)
21
20
5
6
Use Demo mode (Section 5.8)
19
7
8
18
9
17
10
16
11
12
13
15
Downloaded
EN-14 From TV-Manual.com Manuals
14
2. SOURCE
Selects connected devices.
3. ACTIVE CONTROL
Select On, Off, or On + Light Sensor*.
The TV measures and corrects incoming
signals to provide the best picture.
4. DEMO*
Toggles the Demo menu on or off.
5. SURF
Stores favourite channels.
6. COLOUR KEYS
Selects tasks or teletext pages.
7. FORMAT
Toggles through a selection of picture
formats.
8. OK
Accesses the menus and activates settings.
18. BACK
To return to the previous menu.
19. INCREDIBLE SURROUND
Enables Incredible Surround with stereo
sources. Spatial mode is enabled with mono
sources.
20. DUAL SOUND
Switches Stereo and Nicam Stereo
to Mono. Selects first language (Dual å)
or second language (Dual »)in bilingual
programmes.
21. SLEEP
Activates the sleep timer.
22. AMBILIGHT*
Switches Ambilight on or off.
23. TELETEXT
Switches Teletext on or off.
* Available in selected models.
9. NAVIGATION KEYS
Navigates the menu.
10. SMART MODE
Toggles through predefined picture and
sound settings.
11. CHANNEL (CH) +/Switches to the next or previous channel.
12. MUTE
Turns the sound on or off.
13. NUMBER KEYS
Selects a channel, page or setting.
14. ALTERNATE CHANNEL
Returns to the previously-viewed channel.
15. STATUS/EXIT
Displays channel information or exits from
a menu.
16. VOLUME +/Increases or decreases volume.
17. MENU/EXIT
Switches the menu on or off.
Downloaded From TV-Manual.com Manuals
EN-15
EN
1. POWER
Switches the TV on from standby or back
to standby.
5.2
Use TV menus
On-screen menus help you install your TV,
adjust picture, sound and Ambilight settings and
access other features. This section describes
how to navigate the menus.
5.2.1. Access the main menu
Surround, and BBE. See Section 5.3 Adjust
Picture and Sound settings.
•
Ambilight
To turn Ambilight on or off and to change
the mode. See Section 5.4 Adjust Ambilight
settings.
•
Features
To turn features on or off and to adjust
special features such as Timer, Child Lock,
Parental Lock and Demo See Section 5.7
Use timers and child lock and Section 5.8 Use
Demo mode.
•
Install
To select the display language, auto store,
manual store, sort and name TV channels,
and to store a list of favourite channels. See
Section 6 Install channels.
•
Location
To change your TV location to the Home
or Shop mode. See Section 6.4 Change to
Shop or Home mode.
1. Press MENU on the remote control to
display the main menu.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
Brightness
Colour
Contrast
Sharpness
Colour Temp
* Available in selected models
5.2.2. Use the main menu
This section describes how to use the main
menu.
2. Press MENU to exit.
The main menu offers the following items:
•
•
Picture Setting
To adjust picture settings such as
Brightness, Colour, Contrast, Sharpness, and
Colour Temperature. See Section 5.3 Adjust
Picture and Sound settings.
Advanced Picture
To turn on or off Advanced Picture settings
such Contrast+, Active Control, Artifacts
Reduction* and HD Natural Motion*. See
Section 5.3 Adjust Picture and Sound settings.
* Available in selected models.
•
Sound
To adjust sound settings such as Equalizer,
Balance, Auto Volume Leveller, Incredible
Downloaded
EN-16 From TV-Manual.com Manuals
1. Press MENU on the remote control to
display the main menu.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
* Available in selected models
Brightness
Colour
Contrast
Sharpness
Colour Temp
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
Picture Setting
Brightness
Colour
Contrast
Sharpness
Colour Temp
EN
2. Press Æ to enter the Picture Setting
menu.
Brightness
Colour
Contrast
Sharpness
Colour Temp
* Available in selected models
3. Press Æ to select Brightness.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
4. Press Æ to enter the Brightness setting.
Brightness
Contrast+
Active Control
Artifacts Reduction*
HD Natural Motion*
* Available in selected models
2. Press Æ to enter the list.
3. Press Î or ï to select a setting:
5. Press Î or ï to adjust the setting.
•
6. Press Í to return to the Picture settings
or press MENU to exit.
Brightness
Changes the level of light in the picture.
•
Colour
Changes the level of saturation.
•
Contrast
Changes the level of bright parts in the
picture keeping the dark parts unchanged.
•
This section describes how to adjust picture
and sound settings.
Sharpness
Changes the level of sharpness of fine
details.
•
5.3.1. Adjust picture settings
1. Press MENU on the remote control and
select Picture Setting or Advanced
Picture.
Colour Temperature
Sets the colours to Normal, Warm
(reddish) or Cool (bluish).
•
Contrast+
Changes the contrast range of the picture.
Switch on or off.
•
Active Control
Corrects all incoming signals to provide
D Note
More choices are available when HD
equipment or PC is connected.
5.3
Adjust picture and sound
settings
Downloaded From TV-Manual.com Manuals
EN-17
the best picture possible. Switch on, off, or
on+light sensor*.
•
•
Artifacts Reduction*
Smoothens the transitions on digital
pictures. Switch on or off.
HD Natural Motion*
Reduces the field and line flicker and
reproduces smooth movement especially in
movies. Switch on or off.
•
Personal
Based on the settings you customised in
the Picture Setting menu.
D Note: The power meter displayed on the
screen indicates the power consumption
for each mode. For example, 10% means
this mode uses 10% of the TV’s total powr
consumption in wattage.
Power
100%
* Available in selected models.
10%
5.3.2. Use Smart Mode
Apart from manually adjusting picture settings,
you can use Smart Mode to set your TV to a
predefined picture, sound and Ambilight setting.
1. Press SMART MODE on the remote
control to toggle through a selection of
pre-defined picture and sound settings.
Summary of smart modes
•
Vivid
Sharp picture settings and clear sound for
high action.
•
Standard
For normal TV viewing.
•
Movie
Brilliant picture settings for a cinematic
experience.
•
Game
Optimised for PCs, game consoles and
playstations.
•
Power Saver
Eco friendly settings to reduce power
consumption.
Downloaded
EN-18 From TV-Manual.com Manuals
0%
5.3.3. Change picture format
Change the picture format to suit your content.
1. Press ∏ on your remote control.
2. Press Í or Æ to select one of the following
picture formats:
•
Wide screen
The picture is displayed in the original
proportions of images transmitted in 16:9
format.
D Note: If you display a 4:3 picture in
widescreen mode, the picture is stretched
horizontally.
4:3
•
Super zoom
EN
•
The picture is reproduced in 4:3 format
and a black band is displayed on either side
of the picture.
•
This mode is used to display 4:3 pictures
using the full surface of the screen by
enlarging the sides of the picture.
Movie expand 14:9
5.3.4. Adjust sound settings
This section describes how to adjust sound
settings.
The picture is shown in 14:9 format. A
thin black band remains on both sides of
the picture and the top and bottom of the
picture is clipped off.
•
Movie expand 16:9
The picture is enlarged to 16:9 format. This
mode is recommended when displaying
pictures with black bands at the top and
bottom (letterbox). In this mode, large
parts of the top and the bottom of the
picture are clipped off.
•
Subtitle Zoom
1. Press MENU on the remote control and
select Sound.
2. Press Æ to enter the list.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
Equalizer
Balance
Auto Vol. Leveller
Incr. Surround
BBE
* Available in selected models
3. Press Î or ï to select one of the following
settings:
• Equalizer
Adjusts each individual frequency (tone).
• Balance
Balances the left and right speaker’s
sound level.
This mode is used to display 4:3 pictures
using the full surface of the screen leaving
the sub-titles visible. Part of the top of the
picture is clipped off.
Downloaded From TV-Manual.com Manuals
• Auto Volume Leveller
Controls the sudden sound level
increase when changing channels or
during commercial break.
• Incredible Surround
Enhances stereo effect. Select Incr.
Surround or Stereo (when in stereo
EN-19
mode) or Mono or Spatial (when in
mono mode).
• BBE (High definition sound)
An enhancement technology licensed
by BBE Sound. Restores clarity and
presence for better speech intelligibility
and musical realism.
5.4
• Custom Colour
Sets the colour saturation or palette.
D Note
This option appears only after you select
Colour > Custom above.
• Balance
Sets the level of Ambilight on the left
and right side of the TV.
Adjust Ambilight settings
This feature is not available on all models.
1. Press MENU on the remote control and
select Ambilight.
2. Press Æ to enter the list.
C Caution
To avoid poor remote control reception, do
not place remote control sensors on your
devices in range of Ambilight.
5.5
Main
Picture Setting
Advanced Picture
Sound
Ambilight
Features
Install
Location
Ambilight
Brightness
Mode
Colour
Custom colour
Balance
Use advanced teletext
features
Depending on model, your TV has a 1,000 page
memory that stores broadcasted teletext pages
and sub pages. The teletext memory reduces
page loading time.
To select a teletext page, see Section 4.4 Use
teletext.
3. Press Î or ï to select one of the following
settings:
• Ambilight
Switches Ambilight on or off.
5.5.1. Select teletext sub pages
A teletext page can hold several sub pages. Sub
pages are displayed on a bar next to the main
page number.
• Brightness
Changes the light output of Ambilight.
1. Press ¤ on the remote control.
• Mode
Chooses from four Ambilight modes:
Colour, Relaxed, Moderate, and Dynamic.
3. Press Í or Æ to select a subpage.
• Colour
Selects a pre-defined colour setting
(Warm white, Cool white, Blue, Red,
Green, Yellow, Magenta, or make a
custom colour of your own.
D Note
This option appears only after you select
Mode >Colour above.
Downloaded
EN-20 From TV-Manual.com Manuals
2. Select a teletext page.
5.5.2. Select T.O.P. teletext broadcasts
Table Of Pages (T.O.P.) teletext broadcasts
allow you to jump from one subject to another
without using page numbers. T.O.P. teletext is
not broadcast on all TV channels.
1. Press ¤ on the remote control.
2. Press STATUS/EXIT.
EN
3. Press again to enlarge the bottom half of
the page.
4. Press again to return to the normal page
size.
The T.O.P. overview appears.
3. Press Í, Æ or Î, ï to select a subject.
5.5.5. Hold teletext pages
4. Press OK to view the page.
Certain pages contain sub-pages which are
automatically displayed successively.
5.5.3. Search teletext
1. Press ¤ on the remote control.
You can quickly jump to a subject linked to a
series of page numbers or search for specific
words in teletext pages.
2. Press Ó to stop or resume sub-page
progression.
1. Press ¤ on the remote control.
3. Press Í or Æ to select previous or next
sub-page.
2. Press OK to highlight the first word or
number.
3. Press Î, ï or Í, Æ to jump to the next
word or number on the page.
4. Press OK to search a page which holds the
highlighted word or number.
5. Press Î until no word or number is
highlighted to quit the search.
5.5.4. Enlarge teletext pages
5.5.6. Reveal hidden information
For more comfortable reading, you can enlarge
the teletext page.
You can hide or reveal hidden information on a
page, such as solutions to riddles or puzzles.
1. Press ¤ on the remote control and select
a teletext page.
1. Press ¤ on the remote control.
2. Press Î or ï on the remote control to
enlarge the top half of the page.
Downloaded From TV-Manual.com Manuals
2. Press Ÿ to reveal or hide information.
EN-21
Surf
003
006
008
001
005
009
010
002
5.6
Create a surf list
You can store up to eight frequently watched
channels in a surf list.
3. Press Æ to delete the channel.
1. Select a channel that you want to add to
the surf list.
Surf
003
006
008
001
005
009
002
2. Press SURF on the remote control to
display the surf list.
Surf
003
4. Repeat steps 1 to 3 to delete more
channels from the list.
5. Press STATUS/EXIT to exit.
5.7
3. Press Æ to add the selected channel to the
surf list.
4. Repeat steps 1 to 3 to add more channels
to the list.
Use timers and child lock
This section describes how to switch the TV on
or off at a specified time and to lock or unlock
the TV. Child lock is useful in preventing your
children from watching non-authorised content.
5. Press STATUS/EXIT to exit.
5.7.1. Automatically switch the TV to
standby (Sleep timer)
To view the a channel from the surf list
Sleep timer switches the TV to standby after a
defined period of time.
1. Press SURF to display the surf list.
2. Press Î or ï until you find the channel.
To delete a channel from the surf list
1. Press SURF to display the surf list.
2. Press Î or ï until you find the channel
that you wish to delete.
Downloaded
EN-22 From TV-Manual.com Manuals
1. Press MENU on the remote control and
select Features > Timer > Sleep.
Sleep
Time
Start Time
Stop Time
Channel
Activate
Parental Lock
Lock Channel
Change Code
Clear All
Lock All
* Available in selected models
2. Press Æ to enter the Sleep menu.
3. Press Î or ï to select the sleep time. If set
to zero minute the sleep timer is switched
off.
4. Press OK to activate the Sleep timer.
You can always switch off your TV earlier or
reset the time during the countdown.
5.7.2. Automatically switch the TV on
(Timer)
Timer switches the TV to a specified channel at
a specified time, from standby. Your TV must be
in standby for the timer to work.
1. Press MENU on the remote control and
select Features > Timer.
2. Press Æ to enter the Timer menu.
3. Use Î or ï, Í or Æ to select and enter
the menu items to set a time, start time,
stop time, channel, and frequency.
4. Press OK to confirm.
5. Press MENU to exit.
E Tip
To switch off the timer, select Off in
Features > Timer > Activate.
5.7.3. Lock TV channels (Parental Lock)
You can lock TV channels with a four digit code
to prevent children from watching unauthorised
content.
2. Press Æ to enter the code setup.
3. Enter your code with the number keys.
The Features menu reappears with a
message confirming that your code is
created or changed.
E Tip
If you forget your code, enter ‘0711’ twice
to override any existing codes.
To enter the Parental Lock menu
1. Press MENU on the remote control and
select Features > Parental Lock.
2. Press Æ to enter your code.
3. Enter your code with the number keys.
Features
Timer
Child Lock
Parental Lock
Demo*
* * * *
Access Code
* Available in selected models
To lock or unlock all channels
1. In the Parental Lock menu, select Lock
All or Clear All.
2. Press Æ to enter.
3. Press OK to confirm your choice.
Downloaded From TV-Manual.com Manuals
EN-23
EN
Features
Timer
Child Lock
Parental Lock
Demo*
To set or change a PIN code
1. Press MENU on the remote control and
select Features > Parental Lock >
Change code.
Parental Lock
Lock Channel
Change Code
Clear All
Lock All
Features
Timer
Child Lock
Parental Lock
Demo*
Yes
Locked
To lock one or more channels
1. Press MENU on the remote control and
select Features > Parental Lock > Lock
Channel.
2. Press Æ to enter.
3. Press Î or ï to select the channels you
want to lock.
4. Press OK to lock the channel. A + symbol
appears next to the channel number. To
unlock, press OK again.
Parental Lock
Lock Channel
Change Code
Clear All
Lock All
001
002
003
004
005
006
007
008
Off
On
* Available in selected models
3. Press OK to confirm.
4. Press MENU to exit.
5.8
Use Demo mode
Demo mode is not available in all models.
Consult your product specification to see
whether your set has demo mode.
The demo mode enables you to see the
difference between the new video technologies
available on your TV and conventional TVs
without these features.
1. Press MENU on the remote control and
select Features > Demo.
+
Features
Timer
Child Lock
Parental Lock
Demo
Pixel Plus 3HD*
5. Repeat the above steps to lock or unlock
more channels.
5.7.4. Lock the side controls (Child Lock)
You can lock the side controls of the TV to
prevent children from changing channels. You
can still change channel by using the remote
control.
Demo
Pixel Plus 3HD*
Off
On
1. Press MENU on the remote control and
select Features > Child Lock.
2. Press Î or ï to select On or Off.
* Varies according to models.
Consult your product specification for details.
Downloaded
EN-24 From TV-Manual.com Manuals
2. Press Î or ï to select On or Off.
EN
3. Press OK to confirm.
4. Press MENU to exit.
Alternatively, you can turn on or off the Demo
mode with the DEMO button on the remote
control.
1. Press DEMO on the remote control. The
Demo mode turns on.
2. Press DEMO again to turn off a demo.
Downloaded From TV-Manual.com Manuals
EN-25
6
Install channels
This chapter describes how to install channels
and tune channels.
6.1
Automatically install
channels
This section describes how to search and store
channels automatically.
Step 1 Select your menu language
1. Press MENU on the remote control and
select Install > Language.
Install
Language
Auto Store
Manual Store
Sort
Name
Fav. Program
6.2
Manually install channels
This section describes how to search and store
analogue channels manually.
Step 1 Select your system
D Note
Skip to Step 2 Search and store new TV
channels if your system settings are correct.
1. Press MENU on the remote control and
select Install > Manual Store.
Install
Language
Auto Store
Manual Store
Sort
Name
Fav. Program
Colour System
Sound System
Search
Channel
Fine Tune
Store
2. Press Æ to enter Manual Store.
3. Press Æ to enter Colour System.
2. Press Î or ï to select your language.
3. Press OK to confirm.
4. Press Î or ï to select the appropriate
system.
4. Press MENU to exit.
5. Press Í to return to the Manual Store
menu.
Step 2 Install channels automatically
6. Press ï to select Sound System.
Your TV searches and stores all available TV
channels.
7. Press Î or ï to select the appropriate
system.
1. Press MENU on the remote control and
select Install > Auto Store.
8. Press Í to return to the Manual Store
menu.
2. Press OK to start installation.
The installation may take a few minutes.
3. When the channel search is completed,
the TV will go to the first installed channel
number.
4. Press MENU to exit.
E Tip
To rename, reorder or uninstall stored
channels, see Section 6.3 Manage channels.
Downloaded
EN-26 From TV-Manual.com Manuals
Step 2 Search and store new TV channels
1. Press MENU on the remote control and
select Install > Manual Store > Search.
2. Press Î or ï to adjust the frequency
3. Press Í when done.
44MHz
EN
Manual Store
Colour System
Sound System
Search
Channel
Fine Tune
Store
4. Select Store to store the fine tuned
channel under the current channel number.
5. Press Æ to enter.
6. Press OK. Stored appears.
7. Press MENU to exit.
2. Press Æ and the number keys on the
remote control to manually enter the
three-digit frequency.
3. Press Í when the new channel is found.
4. Press ï to select Channel.
5. Press Î or ï to select a channel number.
Alternatively, use the number keys on the
remote control to manually enter the
channel number.
6. Press ï to store the new channel under a
new channel number.
7. Press Æ to enter.
8. Press OK. Stored appears.
9. Press MENU to exit.
6.3
Manage channels
This section describes how to reorder, name,
rename, or store favourite channels.
6.3.1. Reorder channels
1. Press MENU on the remote control and
select Install > Sort.
2. Press Î or ï to select the channel you
want to reorder.
Install
Language
Auto Store
Manual Store
Sort
Name
Fav. Program
6.2.1. Fine tune channels
You can fine tune channels when reception is
poor.
1. Press MENU on the remote control and
select Install > Manual Store > Fine
Tune.
Manual Store
Colour System
Sound System
Search
Channel.
Fine Tune
Store
Downloaded From TV-Manual.com Manuals
001
002
003
004
005
006
007
008
3. Press Æ to confirm.
4. Press Î or ï to select the channel you
want to change to.
5. Press Í to confirm.
Install
Language
Auto Store
Manual Store
Sort
Name
Fav. Program
001
002
003
004
005
006
007
008
EN-27
6. Repeat the above steps to reorder more
channels.
7. Press MENU to exit.
6.3.2. Name or rename channels
This feature is not available for external
channels.
1. Press MENU on the remote control and
select Install > Name.
2. Press Î or ï to select the channel you
want to rename.
3. Press Æ to start the process.
4. Press Î or ï to select the characters or
numbers from the list. You can use up to
five characters or numbers.
5. Press Í to end the process.
6. Repeat the above steps to name or rename
more channels.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
* Available in selected models
2. Press the Î or ï to select the channel
number you want to add or remove from
the list.
Install
Language
Auto Store
Manual Store
Sort
Name
Fav. Program
7. Press MENU to exit.
6.3.3. Store your favourite channels
You can specify a list of favourite channels.
When you use the CH – / + keys of the
remote control to access channels, only the
favourite channels are accessed.
To access channels that are not in your list of
favourites, use the 0 to 9 numerical keys.
Add or remove channels from your list of
favourites
1. Press MENU on the remote control and
select Install > Fav. Program.
Language
Auto Store
Manual Store
Sort
Name
Fav. Program
001
002
003
004
005
006
007
008
3. Press Æ or OK to add or remove the
channel from your list.
D When the $ is displayed on the right
of the menu, the channel is in the list of
favourites.
When the $ is not displayed on the right
of the menu, the channel is not in the list of
favourites.
Install
Language
Auto Store
Manual Store
Sort
Name
Favourite Program
001
002
003
004
005
006
007
008
4. Press the Í key to return to the previous
menu.
5. Press MENU to exit.
Downloaded
EN-28 From TV-Manual.com Manuals
Change to Shop or Home
mode
EN
6.4
1. Press MENU on the remote control and
select Location.
2. Press Æ to enter the Location menu.
3. Use Î or ï to select the TV mode:
• Shop
Sets smart settings to Vivid, ideal for
a shop environment. The flexibility to
change settings is limited.
• Home
Gives home users the full flexibility to
change all TV settings.
4. Press OK to confirm.
Main
Picture Setting
Advanced Picture
Sound
Ambilight*
Features
Install
Location
Home
Shop
5. Press MENU to exit.
Downloaded From TV-Manual.com Manuals
EN-29
7
Connect devices
7.1
Connection overview
6
HDMI 1
HDMI 2
HDMI 3
10
AUDIO IN
9
VGA
SERV. C
5
R
L
7
Y
Pb
VIDEO
Pr
75Ω
TV ANTENNA
L
4
R
8
VIDEO
L
L
R
R
CVI-1
AV OUT
AV IN
3
2
1
Back connectors
Back connectors
1. AV IN
Video and audio input cinch connectors for
connection to devices.
2. AV OUT
Video output cinch connector and audio
L/R connectors for connection to devices.
3. CVI-1
Component video (Y Pb Pr) and Audio
L/R input connectors for DVD players,
digital receivers, game consoles and other
component video devices.
4. TV ANTENNA
Aerial plug connector.
5. SERV C
For service use (do not insert the
headphone here).
6. HDMI 1/2/3 (available in selected models)
HDMI input connectors for Blu-ray Disc
players, digital receivers, game consoles and
other high-definition devices.
Downloaded
EN-30 From TV-Manual.com Manuals
Side connectors
7. VGA/AUDIO IN
Input connectors for PC or other devices.
Audio connectors are also for devices that
require a separate audio channel.
Side connectors
8. AUDIO L/R
Audio L/R input connectors for composite
and S-Video devices.
9. Headphones
Stereo mini jack.
10. HDMI (available in selected models)
Additional HDMI connector for mobile
high-definition devices.
Select connection quality
This section describes how you can enhance
your audio visual experience by connecting
your devices with the best possible connectors.
After connecting your devices, be sure to
enable them as described in Section 7.4 Setup
devices.
supports high-definition signals, picture quality
is lower than HDMI and is analogue.
When connecting a component video
cable, match the cable colours to the CVI
connectors on the back of the TV. Also,
connect a Audio L/R cable to the red and white
Audio L/R input connectors at CVI.
7.2.1. HDMI - Highest quality
Component video cable - Red, Green, Blue
HDMI produces the best audio visual quality
possible. Both audio and video signals are
combined in one HDMI cable, providing an
uncompressed, digital interface between your
TV and HDMI devices. You must use HDMI to
experience full high-definition video.
E Tip
If your device only has a DVI connector,
use a DVI-HDMI adaptor to connect your
device to a HDMI connector on the TV. As
such a connection does not support sound,
you must connect a separate audio cable
from the device to the Audio L/R input at
the AUDIO IN connectors on the TV.
D Note
Philips HDMI supports HDCP (Highbandwidth Digital Contents Protection).
HDCP is a form of Digital Rights
Management that protects high definition
content in DVD or Blu-ray Discs.
Audio L/R cable - Red, White
7.2.3. S-Video - Good quality
S-Video provides better picture quality than
composite video. When connecting your
device with S-Video, plug the S-Video cable to
the S-Video connector on the side of the TV.
You must connect a separate Audio L/R cable
from the device to the red and white Audio L/R
input connectors on the side of the TV.
7.2.2. Component (YPbPr) - Higher
quality
Component (Y Pb Pr) video provides better
picture quality than S-Video or composite
video connections. Though component video
S-Video cable
Downloaded From TV-Manual.com Manuals
EN-31
EN
7.2
Cable
Audio L/R cable - Red, White
ANTENNA/CABLE
7.2.4. Composite - Basic quality
TO TV
Set top box
Composite video provides basic analogue
connectivity, usually combining a (yellow) video
cinch cable with (red and white) Audio L/R
cinch cable. Match the cable colours when
connecting to the composite Video and Audio
L/R input connectors on the side of the TV.
HDMI 1
HDMI 2
AUDIO IN
HDMI 3
VGA
SERV. C
R
L
Y
Pb
VIDEO
Pr
75X
TV ANTENNA
L
R
VIDEO
L
L
R
R
CVI
AV OUT
AV
AV IN
IN
7.3.2. Blu-ray Disc player
Composite audio/video cable- Yellow, red and
white
7.3
For full high-definition video, connect a HDMI
cable to the Blu-ray Disc player or a HD game
console and a HDMI connector on the back or
side of the TV (available in selected models).
Connect devices
This section describes how to connect a
selection of devices. Note that different types
of connectors may be used to connect a device
to your TV, depending on availability and your
needs. The following sections are examples only.
HDMI 1
AUDIO IN
HDMI 3
VGA
SERV. C
R
L
Y
Pb
75X
TV ANTENNA
7.3.1. Cable or set top box
VIDEO
VIDEO
Pr
L
L
L
R
R
R
CVI
Connect an aerial plug from the TV to the set
up box. Then connect the set up box to the
signal input cable from the cable provider.
AV OUT
AV IN
HDMI OUT
HD game console
Downloaded
EN-32 From TV-Manual.com Manuals
HDMI 2
Blu-ray Disc player
7.3.5. DVD recorder and cable receiver
Connect a component video and audio cables
from the DVD player to CVI connectors on
the back of your TV.
To receive channels via a cable receiver and
record programs on a DVD recorder, connect
an antenna cable and a component video cable
from the DVD recorder to your TV. Connect
another antenna cable from the recorder to
the cable receiver.
HDMI 1
HDMI 2
AUDIO IN
HDMI 3
VGA
SERV. C
R
L
HDMI 1
HDMI 2
HDMI 3
Y
Pb
VIDEO
AUDIO IN
VIDEO
VGA
SERV. C
Pr
75X
Y
TV ANTENNA
L
L
R
R
R
L
Pb
L
Pr
VIDEO
VIDEO
75Ω
R
AV OUT
75X
L
TV ANTENNA
AV IN
TV ANTENNA
R
L
L
R
R
CVI
AV OUT
Component
video IN
AV IN
CVI
Cable
Component video
Y
Y
Pb
L
Pr
R
Pb
L
Pr
R
ANTENNA
OUT
IN
DVD player/Home Theatre System
7.3.4. VCR
ANTENNA IN
Connect a composite video cable from the
player to the AV IN connectors on the back of
the TV. For recording of TV programmes on a
VCR, connect to the AV OUT connectors.
HDMI 1
HDMI 2
AUDIO IN
HDMI 3
VGA
SERV. C
R
L
Y
VIDEO
VIDEO
Pb
75X
TV ANTENNA
DVD recorder
Pr
L
L
R
R
ANTENNA OUT
Cable receiver
7.3.6. Game console or camcorder
The most practical connection for a mobile
game console or camcorder may be at the side
of the TV. You can, for example, connect the
game console or camcorder to VIDEO/S-Video
and AUDIO L/R connectors at the side of the
TV. An HDMI connector is also available for
high-definition devices.
L
R
CVI
AV OUT
AV IN
Composite video
IN
OUT
VIDEO
VIDEO
AUDIO L
AUDIO L
AUDIO R
AUDIO R
VCR
Downloaded From TV-Manual.com Manuals
EN-33
EN
7.3.3. DVD player/Home theatre system
A permanent game console or camcorder can
be connected to an HDMI connector or AV
IN (component) connectors at the back of the
TV.
7.3.7. Personal Computer
C Caution
Before connecting the PC, set the PC
monitor refresh rate to 60Hz. See Section
11 Technical data for a list of computer
resolutions.
Connecting to the back of the TV (VGA)
1. Connect your PC to the VGA connector at
the back of the TV.
2. Connect an audio cable from your PC to
AUDIO IN L/R connectors on the back of
the TV.
7.4.1. Select connectors
To select the device connected to the
connectors on your TV.
1. Press SOURCE on the remote control.
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*
* Available in selected models
2. Press ï or Î to select a connector.
3. Press OK to confirm.
4. Repeat the above steps to select another
connector.
HDMI 1
HDMI 2
AUDIO IN
HDMI 3
AUDIO IN
VGA
VGA
SERV. C
R
L
R
Y
L
Pb
75X
TV ANTENNA
VIDEO
Pr
L
R
CVI
VIDEO
L
L
R
R
AV OUT
AV IN
Connecting to the side of the TV
(S-Video)
If your PC has no VGA connection, use the
S-VIDEO and AUDIO L/R input connectors at
the side of the TV. This type of connection is
best suited to applications such as Windows
Media Center.
7.4
Setup devices
When all devices are connected, you must
select the type of device attached to each
connector.
Downloaded
EN-34 From TV-Manual.com Manuals
Use your TV as PC
monitor
8.1
Configure PC mode
1. Connect your computer in Section 7.3.7
Personal Computer.
•
Auto Adjust
To synchronise the TV and computer Phase
and Clock rate automatically. The geometry
is also adjusted.
•
Reset
To return to default settings.
2. Press SOURCE on the remote control.
The list of sources appears.
3. Press ï to select VGA and press OK to
confirm.
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*
* Available in selected models
D Note: Set your PC refresh rate to 60 Hz.
Picture settings in PC mode
Except for Horizontal Shift and Vertical Shift,
all of the picture settings in PC mode are the
same as the picture settings in TV mode.
•
Horizontal Shift
To adjust horizontal position of the range.
•
Vertical Shift
To adjust vertical position of the range.
Feature settings in PC mode
• Phase and Clock
To match the TV and computer display
settings
Downloaded From TV-Manual.com Manuals
EN-35
EN
8
9
Use your TV in High
Definition (HD) mode
7. Press MENU to exit.
Picture settings in HD mode
The HD (High Definition) mode allows you to
enjoy clearer and sharper pictures if you are
using HD equipment that can produce high
definition video signals.
Except for Horizontal Shift and Vertical Shift,
all of the picture settings in PC mode are the
same as the picture settings in TV mode.
•
Horizontal Shift
To adjust horizontal position of the range.
9.1
•
Vertical Shift
To adjust vertical position of the range.
Configure HD mode
1. Connect your HD equipment as shown in
the Quick Start Guide
2. Press SOURCE on the remote control.
Sound settings in HD mode
All the sound settings in PC mode are the same
as the sound settings in TV mode.
9.2
The list of sources appears.
3. Press ï to select the correct HDMI and
press OK to confirm.
Source list
TV
AV
SIDE AV
CVI
VGA
HDMI 1
HDMI 2
HDMI 3*
Side HDMI*
* Available in selected models
4. Press MENU to display the on-screen
menus.
5. Go to Features > Mode Selection.
6. Press ï and OK to select HD.
Features
Timer
Child Lock
Parental Lock
Mode Selection
Configure the TV in HD
mode
You must configure the TV in HD mode when
you connect a HD equipment that supports the
following resolutions: 480p, 720p, or 1080p.
The Features menu includes the Mode
Selection option and the Format option.
1. Press the MENU key to display the Main
menu.
2. Press the Î or ï key to select Features,
and press the Æ or OK to enter the menu.
3. Press the ï key to select Mode
Selection, and press Æ or OK to enter
the setting.
Features
Timer
Child Lock
Parental Lock
Mode Selection
PC
HD
PC
HD
4. Press the Î or ï key to select HD.
5. Press the Í key to return to the previous
menu.
Downloaded
EN-36 From TV-Manual.com Manuals
8. Press the MENU key to exit the menu.
9.3
9.4
Display in native 1080 mode
D Note: Only TVs with the full HD 1080p can
display in native 1080i mode.
When you connect HD equipment that
supports a resolution of 1080i or 1080p, the
Display (native 1080) feature is available in
the Features menu. This feature allows you to
watch the original HD format in 1080i mode.
1. Press the MENU key to display the Main
menu.
2. Press the Î or ï key to select Features,
and press the Æ or OK key to enter the
menu.
3. Press ï key to select Display.
Features
Timer
Child Lock
Parental Lock
Display
native 1080
EN
6. Press the MENU key to exit the menu.
Supported formats
The following table list the supported input
formats for HD mode.
Non 1080p models
HD format
480p
SD format
576p
720p
480i
1080i
576i
1080p models
HD
format
SD
format
480p
576p
480i
720p
1080p
1080i
576i
D Note: Your Philips TV is HDMI compliant.
If you do not get a good picture, please
change the video format on your peripheral
devices. Refer to the table above for details.
4. Press the Æ key to access Display.
5. Press the Æ key twice to access the Off/
On option in the native 1080.
Display
native 1080
Off
On
6. Press the Î ï keys to select Off or On.
Select On option to watch native 1080
mode.
7. Press the Í key to return to the previous
menu.
Downloaded From TV-Manual.com Manuals
EN-37
10 Use Philips EasyLink
Your TV is enabled for HDMI-CEC connections
with other devices. The following descriptions
apply to devices that are CEC-compliant and
connected to your TV through an HDMI cable.
One-touch play
When you connect your TV to devices that
support One-touch play, you can control your
TV and the devices with one remote control.
For example, when you press one-touch play
on your DVD’s remote control, your Philips TV
will automatically switch to the correct channel
to show the DVD content.
One-touch standby
When you connect your TV to devices that
supports one-touch standby, you can use your
TV’s remote control to put the devices to
standby. To put a device into standby, press and
hold the . button on the TV’s remote control
for 3-4 seconds.
Downloaded
EN-38 From TV-Manual.com Manuals
Supported display resolutions
•
HDMI Input:
Mode
PC Format
Video Format
•
Sound
•
Sound mode: Mono, Stereo, Incredible
Surround, BBE, *WooX
Signal Format
640x480@60Hz, 72Hz,
75Hz, 85Hz
720x400@70Hz, 85Hz
800x600@60Hz, 72Hz,
75Hz, 85Hz
1024x768@60Hz, 70Hz,
75Hz, 85Hz
1280x768@60Hz
1280x1024@60Hz
1360x768 @ 60Hz
Remote control
720x480p@60Hz
720(1440)x480i@60Hz
720x576p@50Hz
720x(1440)x576i@50Hz
1280x720p@60Hz
1280x720p@50Hz
1920x1080i@50Hz,
60Hz
1920x1080p@24Hz,
25Hz, 30Hz, 50Hz, 60Hz
PC Analog, D-sub input:
Mode
Signal Format
PC Format
640x480@60Hz, 72Hz,
75Hz, 85Hz
720x400@70Hz, 85Hz
800x600@60Hz, 72Hz,
75Hz, 85Hz
1024x768@60Hz, 70Hz,
75Hz, 85Hz
1280x768@60Hz
1280x1024@60Hz
1360x768 @ 60Hz
Tuner / Reception / Transmission
•
Antenna input: 75ohm coaxial (IEC75)
•
TV system: PAL I, PAL B/G, PAL D/K,
SECAM B/G, SECAM D/K
•
Video playback: NTSC, SECAM, PAL
Downloaded From TV-Manual.com Manuals
•
Batteries: 2 x AAA size (LR03 type)
Connections (Rear)
• AV IN: Audio L/R, Video
•
AV OUT: Audio L/R, Video
•
CVI: Component (Y Pb Pr), Audio L/R in
•
*HDMI 1/2/3
•
AUDIO IN
•
VGA
•
TV ANTENNA
Connections (Side)
•
Headphone out (stereo mini jack)
•
AUDIO L/R in
•
Video (CVBS) in
•
S-Video
•
*HDMI
Power
•
Mains power: AC 100-240V
•
Power and standby power consumption: See
technical specifications at www.philips.com
•
Ambient temperature: 5°C - 35°C
Specifications are subject to change
without notice. For detailed specifications
of this product go to www.philips.com/
support.
* available in selected models.
EN-39
EN
11 Technical data
12 Troubleshooting
You receive poor TV reception from an
antenna connection:
This section describes commonly-encountered
issues and accompanying solutions.
•
Check that the antenna is properly
connected to the TV.
12.1 General TV issues
•
Loud speakers, non-earthed audio devices,
neon lights, high buildings or mountains can
influence the picture quality. Try to improve
the reception quality by changing the
antenna direction or moving devices away
from the TV.
•
Verify if the correct TV system is selected
for your region.See Section 6.2 Manually
install channels.
•
If reception on only one channel is poor,
try to fine tune this channel. See Section
6.2.1 Fine tune channels.
The TV does not switch on:
•
Unplug the mains cord, wait for one minute
and plug in the mains again.
•
Verify that the mains cord is properly
connected and that the mains are powered.
The remote control is not working
properly:
•
Verify that the remote control batteries
are correctly inserted according to the +/orientation.
•
Replace the remote control batteries if they
are flat or weak.
•
Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
•
Turn off the TV and unplug the mains
cord. Wait until the TV cools down before
reinserting the mains cord and turning on
the TV. If the blinking occurs again, contact
our Customer Support Centre.
You receive poor picture quality from
connected devices:
•
Check that the devices are connected
properly. Also, be sure to assign devices to
connectors as described in Section 7.4 Setup
devices.
•
Verify that picture settings are correctly
set. See Section 5.3.1 Adjust picture settings.
The TV did not save my settings:
•
You forgot your code to unlock channels
Enter ‘0711’ as described in Section 5.7.3 Lock TV
channels (Parental Lock).
The TV menu is in the wrong language
See Section 6 for instructions on how to
change the TV menu to your preferred
language.
12.2 Picture issues
Verify that the TV is set to the Home
location, which offers you complete
flexibility to change settings. See Section 6.4
Change to Shop or Home mode.
The picture does not fit the screen, it is
too big or too small:
•
Try using a different picture format as
described in Section 5.3.3 Change picture
format.
•
Assign your device to connectors as
described in Section 7.4 Setup devices.
There is sound but no picture:
12.3 Sound issues
•
There is picture but no sound from the
TV:
Verify that picture settings are correctly set.
See Section 5.3.1 Adjust picture settings.
Downloaded
EN-40 From TV-Manual.com Manuals
•
Check that all cables are properly
connected.
•
Check that the volume is not set to 0.
•
Check that the sound is not muted.
There is a picture but sound quality is
poor:
•
Check sound settings as described in
Section 5.3.4 Adjust sound settings. Verify that
Stereo and Equalizer settings are correct.
There is a picture but sound comes from
one speaker only:
•
Verify that the Balance is correctly set,
as described in Section 5.3.4 Adjust sound
settings.
12.4 HDMI connection issues
You encounter problems with HDMI
devices
•
The HDMI - HDCP procedure might take
a few seconds before the TV shows the
picture from a device.
•
If the TV does not recognise the device and
the screen shows no picture, try switching
from one device to another and back again
to restart the HDCP procedure.
•
If you experience intermittent sound
disruptions, check the user manual of the
HDMI device to verify that output settings
are correct. Alternatively, try connecting
the channeling of the audio signal from the
HDMI device to the TV via an additional
audio cable.
•
If a HDMI-to-DVI adaptor or HDMI to DVI
cable is used, check that an additional audio
connection is in place to complete the DVI
connection.
Downloaded From TV-Manual.com Manuals
12.5 PC connection issues
The PC display on my TV is not stable or
is not synchronised:
•
Check that a supported resolution and
refresh rate is selected on your PC. See
Section 11 Technical data for supported
resolutions and refresh rates.
12.6 Contact us
If you cannot solve your problem, contact the
Customer Support Centre in your country
as listed on the last page of this user manual.
Alternatively, consult our website at www.
philips.com/support.
B WARNING
Do not attempt to repair the TV yourself.
This may cause severe injury, irreparable
damage to your TV and void your warranty.
D Note
Please have available your TV model,
product number and serial number before
contacting us. These numbers are available
on your TV as well as on the packaging
accompanying your TV.
EN-41
EN
D Note
If no audio signal is detected, the TV
automatically switches off audio output and
does not indicate malfunction.
Downloaded From TV-Manual.com Manuals
Downloaded From TV-Manual.com Manuals
© 2007 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 3139 125 40124
Downloaded From TV-Manual.com Manuals