Mitsubishi Electric LDT371V Specifications

Index
Important Information ...................................................................................................................................
Safety Precautions, Maintenance & Recommended Use ............................................................................
Contents .......................................................................................................................................................
Parts Name and Functions ..........................................................................................................................
Control Panel ..................................................................................................................................
Terminal Panel ................................................................................................................................
Wireless Remote Control ...............................................................................................................
Operating Range for the Remote Control .......................................................................................
Handling the remote control ...........................................................................................................
Setup Procedure ..........................................................................................................................................
How to Mount and Attach Options to the LCD Monitor ................................................................................
Connections .................................................................................................................................................
Wiring Diagram ...............................................................................................................................
Connecting a Personal Computer ..................................................................................................
Connecting with Digital Interface Equipment ..................................................................................
Connecting a DVD Player with component out ...............................................................................
Connecting to a Stereo Amplifier ....................................................................................................
Basic Operation ............................................................................................................................................
Power ON and OFF Modes ............................................................................................................
Power Indicator ...............................................................................................................................
Using Power Management .............................................................................................................
Selecting a video source ................................................................................................................
Picture Size ....................................................................................................................................
Picture Mode ..................................................................................................................................
Information OSD .............................................................................................................................
OSD (On-Screen-Display) Controls .............................................................................................................
PICTURE ........................................................................................................................................
SCREEN .........................................................................................................................................
SOUND ...........................................................................................................................................
PICTURE IN PICTURE ..................................................................................................................
CONFIGURATION 1 .......................................................................................................................
CONFIGURATION 2 .......................................................................................................................
ADVANCED OPTION .....................................................................................................................
NOTE ..............................................................................................................................................
Controlling the LCD monitor via RS-232C Remote Control .........................................................................
Features .......................................................................................................................................................
Troubleshooting ............................................................................................................................................
Specifications ...............................................................................................................................................
English-2
English-4
English-5
English-6
English-6
English-7
English-8
English-9
English-9
English-10
English-12
English-13
English-13
English-14
English-15
English-16
English-17
English-18
English-18
English-19
English-19
English-19
English-19
English-19
English-19
English-20
English-20
English-21
English-22
English-23
English-23
English-25
English-26
English-27
English-29
English-31
English-32
English-33
Pin Assignment ............................................................................................................................................
English-34
Important Information
DECLARATION OF CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
U.S. Responsible Party:
Address:
Tel. No.:
Mitsubishi Digital Electronics America, Inc.
9351 Jeronimo Road,
Irvine, California 92618 U.S.A.
+1 - (949) 465-6000
Type of Product:
Equipment Classification:
Model:
Computer Monitor
Class B Peripheral
LDT371V (BJ544)
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules.
Windows is a registered trademark of Microsoft Corporation. All other brands and product names are trademarks or
registered trademarks of their respective owners.
Canadian Department of Communications Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No.
60950-1.
FCC Information
1. Use the attached specified cables with the LDT371V (BJ544) color monitor so as not to interfere with radio and
television reception.
(1) Please use the supplied power cord or equivalent to ensure FCC compliance.
(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to 15-pin mini D-SUB.
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify
and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
English-2
English
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE
THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE
PRONGS CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit
has been included. Therefore, it should be read carefully in order to avoid any problems.
CAUTION
This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp
may be regulated due to environmental considerations. For disposal or recycling information, please contact
your local authorities or the Electronic Industries Alliance: www.eiae.org. (For US only).
Declaration
Declaration of the Manufacturer
We hereby certify that the color monitor LDT371V(BJ544)
is in compliance with
Council Directive 73/23/EEC:
– EN 60950-1
Council Directive 89/336/EEC:
– EN 55022
– EN 61000-3-2
– EN 61000-3-3
– EN 55024
and marked with
Mitsubishi Electric Corporation
2-7-3, Marunouchi,
Chiyoda-Ku
Tokyo 100-8310, Japan
Declaration of the Manufacturer
Note: This symbol mark is EU contries only.
This symbol mark is according to the directive 2002/96/EC Article 10 Information for
users and Annex IV.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality
materials and components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of
separately from your household waste.
Please, dispose of this equipment at your local community waste collection/recycling center.
In the European Union there are separate collection systems for used electrical and electronic product.
Please, help us to conserve the environment we live in!
English-3
Safety Precautions, Maintenance & Recommended Use
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
detaching the system from the power supply. The monitor
THE FOLLOWING WHEN SETTING UP AND USING
should be installed close to a power outlet, which is easily
THE LDT371V LCD COLOR MONITOR:
accessible.
•
•
Handle with care when transporting. Save packaging for
DO NOT OPEN THE MONITOR. There are no user
transporting.
serviceable parts inside and opening or removing covers
•
Please clean the holes of back cabinet to reject dirt and
may expose you to dangerous shock hazards or other
dust at least once a year because of set reliability.
risks.
•
If using the cooling fan continuously, it’s recommended to
Refer all servicing to qualified service personnel.
•
wipe holes a minimum of once a month.
Do not spill any liquids into the cabinet or use your monitor
•
near water.
•
When installing the remote control batteries;
-
Align the batteries according to the (+) and (-) indications
Do not insert objects of any kind into the cabinet slots, as
inside the case.
they may touch dangerous voltage points, which can be
-
Align the (-) indication of the battery first inside the case.
harmful or fatal or may cause electric shock, fire or
equipment failure.
•
Do not place any heavy objects on the power cord.
CAUTION
Damage to the cord may cause shock or fire.
•
Immediately unplug your monitor from the wall outlet and refer
Do not place this product on a sloping or unstable cart,
servicing to qualified service personnel under the following
stand or table, as the monitor may fall, causing serious
conditions:
damage to the monitor.
•
•
When operating the LDT371V LCD monitor with an AC
•
100-120V power supply in North America, use a power
When operating the LDT371V LCD monitor with an AC
220-240V power supply in Europe, use a power supply
•
If the monitor has been exposed to rain or water.
•
If the monitor has been dropped or the cabinet damaged.
•
If the monitor does not operate normally by following
cord provided with this monitor.
•
operating instructions.
In UK, use a BS-approved power cord with molded plug
having a black (5A) fuse installed for use with this monitor.
If a power cord is not supplied with this monitor, please
•
When operating the LDT371V LCD monitor with a 220-
•
provided with this monitor.
•
contact your supplier.
For all othercase, use a power cord that matches the AC
complies with the safety standard of your particular
Do not place any objects onto the monitor and do not use
cleaner!
•
•
The inside of the fluorescent tube located within the LCD
monitor contains mercury. Please follow the laws or rules of
your municipality to dispose of the tube properly.
•
Do not use monitor in high temperature, humid, dusty, or
•
Use the preset Size and Position controls with standard
signals.
Allow adequate ventilation around the monitor, so that heat
can properly dissipate. Do not block ventilated openings or
Do not put anything on top of the monitor.
Get regular eye checkups.
Ergonomics
•
If monitor or glass is broken, do not come in contact with
place the monitor near a radiator or other heat sources.
effects).
•
the following:
the liquid crystal and handle with care.
•
Avoid displaying fixed patterns on the monitor for long
To realize the maximum ergonomic benefits, we recommend
oily areas.
•
Adjust the monitor’s brightness, contrast and sharpness
periods of time to avoid image persistence (after image
the monitor outdoors.
Do not bend power cord.
Clean the LCD monitor surface with a lint-free, non-
controls to enhance readability.
country.
•
Position the monitor at a 90° angle to windows and other
abrasive cloth. Avoid using any cleaning solution or glass
voltage of the power outlet and has been approved by and
•
Rest your eyes periodically by focusing on an object at
light sources to minimize glare and reflections.
If a power cord is not supplied with this monitor, please
•
For optimum performance, allow 20 minutes for warm-up.
least 5 feet away. Blink often.
240V AC power supply in Australia, use the power cord
•
Recommended Use
CAUTION
•
contact your supplier.
•
If liquid has been spilled, or objects have fallen into the
monitor.
supply cord provided with this monitor.
•
When the power supply cord or plug is damaged.
•
Use the preset Color Setting.
•
Use non-interlaced signals.
•
Do not use primary color blue on a dark background, as it
is difficult to see and may produce eye fatigue due to
insufficient contrast.
The power cable connector is the primary means of
English-4
Contents
• LCD monitor
• Main switch cover
• Power Cord (3m)
• Screw for Main Switch cover x 2
• Video Signal Cable (4m)
• Cable folder
• User’s Manual
• Wireless Remote Control and AAA Batteries
• Clamper x 2
• Screw for Clamper x 2
User’s Manual
Video Signal Cable
(D-SUB to D-SUB Cable)
Screw for Main switch cover
(M3 x 10) x 2
Main switch cover
Cable Folder
Screw for Clamper
(M4 x 8) x 2
Clamper x 2
* The supplied power cord varies depending on destination.
For EU
For UK
For North
America
Power cord
* For all other case, use a power cord that matches the AC
voltage of the power outlet and has been approved by and
complies with the safety standard of your particular country.
* Remember to save your original box and packing material to transport or ship the monitor.
The following components are prepared as option.
• External Speakers
English-5
Wireless Remote Control
and AAA Batteries
English
Your new LDT371V monitor box* should contain the following:
Parts Name and Functions
Control Panel
9
10
OFF
ON
Button Location
EXIT
8
1 POWER button (
7
6
5
MUTE
3
2
4
)
8
Switches the power on/off. See also page 18.
2
INPUT
1
EXIT button
Activates the OSD menu when the OSD menu is turned-off.
Acts as EXIT button to move to previous menu with OSD
menu.
MUTE button
Switches the audio mute ON/OFF.
9
3
INPUT button
Acts as SET button with OSD menu.
(Toggle switches between [RGB1], [RGB2], [RGB3], [DVD/HD],
[VIDEO<S>] and [VIDEO] .)
4 PLUS (+) button
Acts as (+) button to increase the adjustment with OSD menu.
Increase the audio output level when the OSD menu is turned
off.
10
5
MINUS (-) button
UP (
) button
Activates the OSD menu when the OSD menu is turned-off.
Acts as
button to move the highlighted area up to select the
adjustment with OSD menu.
7
DOWN (
Main Power Switch
On/Off Switch to turn main power on/off.
Acts as (-) button to decrease the adjustment with OSD menu.
Decreases the audio output level when the OSD menu is
turned off.
6
Remote control sensor and Power indicator
Receives the signal from the remote control (when using the
wireless remote control). See also page 8.
Glows green when the LCD monitor is in active and glows red
when the LCD is in POWER OFF mode. When the LCD is in
power save mode, it will glow both green and red. When
SCHEDULE is enabled, it willl blink green and glow red. See
page 19. In the case of where a failure is detected, it will blink
red.
NOTE: Control Key Lock Mode
This control completely locks out access to all Control Key
functions. To activate the control key lock function, press both
of “ “ and “ “ and hold down simultaneously for more than 3
seconds. To resume back to user mode, press both of “ “ and
“ “ and hold simultaneously for three (3) seconds.
) button
Activates the OSD menu when the OSD menu is turned-off.
Acts as
button to move the highlighted area down to select
the adjustment with OSD menu.
English-6
English
Terminal Panel
1 AC IN connector
7
Connects with the supplied power cord.
To input audio signal from external equipment such as a
AUDIO IN 1, 2, 3
computer, VCR or DVD player.
2
RGB 1 IN (DVI-D)
To input digital RGB signals from a computer.
8
* This connector does not support analog input.
3
AUDIO OUT
To output the audio signal from the AUDIO IN 1,2 and 3 jack.
RGB 2 IN (mini D-Sub 15 pin)
9
VIDEO IN/OUT
To input a analog RGB signals from a computer or other RGB
VIDEO IN connector (BNC and RCA): To input a composite
equipment.
video signal. BNC and RCA are not available at the same
time.
4
RGB 3 IN [R, G, B, H, V] (BNC)
(Use only one input).
To input the analog RGB signals from a computer or other
VIDEO OUT connector (BNC): To output the composite
RGB equipment.
video signal from VIDEO IN connector.
S-VIDEO IN connector (DIN 4 pin): To input the S-video (Y/
5
C separate signal).
RGB OUT (mini D-Sub 15 pin)
To output the signal from RGB 2 IN or 3 IN.
10
6
EXTERNAL CONTROL (mini D-Sub 9 pin)
Use when operating the LCD monitor from RGB equipment
DVD/HD IN (BNC)
Connecting equipment such as a DVD player, HDTV device, or
like a computer.
Laser disc player.
11
EXTERNAL SPEAKER TERMINAL
To output audio signal from AUDIO 1, 2 or 3 jack.
English-7
Wireless Remote Control
6 MUTE button
To switch the mute function on/off.
7 VOLUME UP button
Increase the audio output level.
8
VOLUME DOWN button
Decrease the audio output level.
9
PIP (Picture In Picture) button
ON/OFF button: PIP-ON/OFF.
See page 23.
INPUT button: Select the ‘picture in picture’ input signal.
CHANGE button: Replaces to the main picture and sub
picture.
10
STILL button
ON/OFF button: To switch the still picture mode on/off.
CAPTURE button: Updates the still picture.
11 DISPLAY button
To switch the information OSD on/off. See page 19.
12
AUTO SETUP button
To enter the auto setup menu. See page 23.
13
MENU button
To switch the menu mode on/off.
14
UP button
Acts as
button to move the highlighted area up to select
the adjustment with OSD menu.
Small screen which adjusted “PIP” mode moves up.
15
DOWN button
Acts as
button to move the highlighted area down to
select the adjustment with OSD menu.
1 POWER button
Small screen which adjusted “PIP” mode moves down.
Switches the power on/off.
16
* If Power Indicator is not glowing, then no controls will work.
2 INPUT button
MINUS button decrease
Acts as (-) button to decrease the adjustment with OSD
menu.
Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/
Small screen which adjusted “PIP” mode moves left.
HD], [VIDEO<S>] and [VIDEO].
17
PLUS button increase
3 AUDIO INPUT button
Selects from input audio signal, [AUDIO1], [AUDIO2],
Acts as (+) button to increase the adjustment with OSD
[AUDIO3]
Small screen which adjusted “PIP” mode moves right.
menu.
4 SIZE button
18
SET button
Selects picture size, [FULL], [NORMAL], [WIDE] and [ZOOM].
Acts as SET button with OSD menu.
See page 18.
5 PICTURE MODE button
19
EXIT button
Turn to previous menu with OSD menu.
Selects from picture mode, [HIGHBRIGHT], [STANDARD],
[sRGB], [CINEMA]. See page 19.
HIGHBRIGHT: for moving image such as DVD
STANDARD: for images (Factory setting)
sRGB: for text based images
CINEMA: for movies.
English-8
Handling the remote control
Point the top of the remote control toward the LCD monitor's
* Do not subject to strong shock.
remote sensor during button operation.
Use the remote control within a distance of about 7 m/23 ft. from
the front of the LCD monitor's remote control sensor and at a
horizontal and vertical angle of within 30° within a distance of
* Do not allow water or other liquid to splash the remote
control. If the remote control gets wet, wipe it dry immediately.
* Avoid exposure to heat and steam.
about 3 m/10 ft.
* Other than to install the batteries, do not open the remote.
30o
30o
Caution
Important, the remote control system may not function when
direct sunlight or strong illumination strikes the remote control
sensor of the LCD monitor, or when there is an object in the
path.
English-9
English
Operating Range for the Remote Control
Setup Procedure
1. Determine the installation location
CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONITOR BY YOURSELF.
3.Connect external equipment (See page
13-17)
•
Installing your LCD display must be done by a qualified
To protect the connected equipment, turn off the main power
before making connections.
technician. Contact your dealer for more information.
CAUTION: MOVING OR INSTALLING THE LCD MONITOR
MUST BE DONE BY TWO OR MORE PEOPLE.
•
Refer to your equipment user manual.
Failure to follow this caution may result in injury if the LCD
4. Connect the supplied power cord
monitor falls.
•
equipment as possible, and should be easily accessible.
CAUTION: Do not mount or operate the display upside down,
•
face up, or face down.
The power outlet socket should be installated as near to the
Fully insert the prongs into the power outlet socket. Loose
connection may cause noise.
CAUTION: Portrait use is not guaranteed for this product.
NOTE: Please refer to “Safety Precautions, Maintenance &
CAUTION: This LCD has a temperature sensor and cooling
fan. If the LCD becomes too hot, the cooling fan will
Recommended Use” section of this manual for proper
turn on automatically. If the LCD becomes over-
selection of AC power cord.
heated and the cooling fan is running, the “Caution”
menu will appear. If the “Caution” menu appears,
discontinue use and allow the unit to cool. When
the LCD monitor is used in an enclosure or with
protection on LCD surface, please check the inside
temperature of monitor by “HEAT STATUS” (See
page 27). The temperature is too hot than normal
Cable folder
condition, please set “cooling fan” to ON on
SCREEN SAVER function (See page 24).
IMPORTANT: Lay the protective sheet, which was wrapped
around the LCD monitor when it was packaged,
beneath the LCD monitor so as not to scratch the
panel.
2.
Install the remote control batteries
The remote control is powered by 1.5V AAA batteries. To install
or replace batteries:
1. Press and slide to open the cover.
2. Align the batteries according to the (+) and (–) indications
inside the case.
5. Switch on the power of all the attached
external equipment
When connected with a computer, switch on the power of the
3. Replace the cover.
computer first.
6. Operate the attached external equipment
Display the signal on the external equipment you wish.
CAUTION
7. Adjust the sound
Incorrect use of batteries can result in leaks or bursting.
Make adjustments when adjustment of the volume is required.
Be careful especially about the following points.
•
Place "AAA" batteries matching the + and - signs on each
battery to the + and - signs of the battery compartment.
Make adjustments when adjustment of the screen display
•
Do not mix battery types.
•
Do not combine new batteries with used ones. It causes
position or distortion is required.
shorter battery life or leakage of batteries.
•
8. Adjust the screen (See pages 20-28)
Remove dead batteries immediately to prevent battery liquid
9. Adjust the image (See page 20-28)
from leaking into the battery compartment. Don't touch ex-
Make adjustments when adjustment such as the brightness or
posed battery acid, it cause damage to your skin.
contrast is required.
NOTE: If you do not intend to use the Remote Control for a long
10. Recommended Adjustment
period, remove the batteries.
English-10
12. To prevent the main power switch
from being changed
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE: With the main power switch cover in place, the main
power switch can not be turned off. Remove main
11. Installing and removing stand
power switch cover in order to switch off the display.
How to install stand
1. Please turn monitor off.
2. After inserting stand in guide block, fasten M6 x 16
screws on both sides of the monitor.
How to remove the stand
1. Spread the protective sheet on the flat surface, such as
a desk.
2. Place monitor on the protective sheet.
3. Remove screws with a screwdriver and place them in a
safe place for reuse.
Screw
screws
Main switch cover
stands
English-11
English
To reduce the risk of “image persistence”, please adjust the
following items based on the application being used.
“SCREEN SAVER” (See page 24), “SIDE BORDER
COLOR”(See page 24), “DATE & TIME” (See page 27),
“SCHEDULE”(See page 27).
How to Mount and Attach Options to the LCD Monitor
You can attach mounting accessories to the LCD monitor in
one of the following two ways:
1. In the upright position
3. Ventilation Requirements for enclosure
mounting
To allow heat to disperse, leave space between surrounding objects as shown in the diagram below.
2. Lay the screen face down
4. To avoid falling down
Protective Sheet
Fasten the LCD monitor to wall using a cord or chain,
which is sufficient to support the weight of the LCD monitor
(approx. 22kg).
462mm
Screw Holes
Table
Tabletop Stand
Cord or Chain
Lay the protective sheet on a table, which was wrapped around
Clamper
the monitor when it was packaged, beneath the screen surface
Screw
so as not to scratch the screen face.
This device cannot be used or installed without the Tabletop Stand
or other mounting accessory. Failure to follow correct mounting
procedures could result in damage to the equipment or injury to
Before moving the LCD monitor, the cord or chain should
be removed.
the user or installer. Product warranty does not cover damage
caused by improper installation.
Failure to follow these recommendations could result in voiding
your warranty.
When using with other mounting accessory, it must be a VESAcompatible mounting method and the screws must be M6 of size
and 10mm or longer of length under consideration of the thickness of the mounting method. (Recommended torque: 470 635N•cm). MITSUBISHI ELECTRIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard
5. To prevent the main power switch from
being changed
To prevent the ability to use the main power switch, please
attach the main switch, which is enclosed as an accessory.
NOTE: With the main power switch cover in place, the main
power switch cannot be turned off. Remove main
power switch cover in order to switch off the display.
in North America.
English-12
Connections
*
First turn off the power of all the attached equipment and make connections.
*
Refer to the user manual included with each separate piece of equipment.
Wiring Diagram
Wiring Diagram
English-13
English
Before making connections:
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display your computer's screen image.
Some video cards may not display an image correctly.
Connect the LCD Monitor to a Personal Computer
• To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin to mini D-sub 15 pin).
• To connect the RGB 3 IN connector (BNC) on the LCD monitor, use a signal cable which is available separately (mini Dsub 15 pin to BNC x 5). Select RGB 3 from the INPUT button.
• When connecting one or more LCD monitors, use the RGB OUT connector (mini D-sub 15 pin).
• The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.
• The AUDIO OUT jack outputs sound from the selected Audio input.
PC or IBM compatible
To analog RGB output
Mini D-sub 15 pin
Mini D-sub 15 pin
To audio output
To audio left output
To audio right output
BNC x 5
Mini D-sub 15 pin
LCD monitor (second monitor)
English-14
Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface)
standard.
Connect the LCD Monitor to a Computer with a Digital Output
•
The RGB 1 IN connector also accepts a DVI-D cable.
•
Input TMDS signals conforming to DVI standards.
•
To maintain display quality, use a cable with a quality prescribed by DVI standards.
•
The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.
•
The signal input from DVI-D connector cannot be output to the RGB OUT connector.
Monitor
To audio output
English-15
English
Connecting with Digital Interface Equipment
Connecting a DVD Player with component out
Connecting your DVD player to your LCD monitor will enable you to display DVD video.
Refer to your DVD player owner’s manual for more information.
Connect the LCD Monitor to a DVD Player
•
To connect the DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need
a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO
INPUT button.
To DVD Component video output
DVD Player
RCA
English-16
To audio right output
To audio left output
BNC-to-RCA
adapter BNC x 3
Monitor
BNC x 3
•
You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's manual for more information.
Connect the LCD Monitor to a Stereo Amplifier
•
Turn on the LCD monitor and the amplifier only after all connections have been made.
•
Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier.
•
Do not reverse the audio left and right jacks.
•
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO2] or [AUDIO3] from the AUDIO
INPUT button.
The AUDIO OUT jack outputs sound from the selected Audio input.
Monitor
To audio left output
To audio right output
VCR or CD player
To composite Output
In case of VCR
To audio left output
RCA
To audio right output
•
RCA
LCD monitor (second monitor)
External speaker
English-17
External speaker
English
Connecting to a Stereo Amplifier
Basic Operation
Power ON and OFF Modes
The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the
following three options:
1. Pressing the Main Power Switch.
NOTE: When the Main Power Switch is used to power off
the LCD monitor, the remote control and the power
button will not activate the on mode and both
green and red power indicator turn off. Be sure to
turn the Main Power Switch to the on mode before
using these two options.
Main Power Switch
2. Pressing the power button.
NOTE: Before pressing the power button, be sure to turn
on the Main Power button on the LCD monitor.
Power Button
3. Using the remote control
NOTE: Before operating the remote control, be sure to
turn on the Main Power Switch on the LCD monitor.
English-18
NORMAL: Display by the inputed signal aspect ratio by PC
signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO signal.
FULL: Display in entire screen.
DYNAMIC: Expand 4:3 pictures to the entire screen with
non-linearity. (Some around image will be cut by expansion.)
CUSTOM (ZOOM)
Image can be expanded beyond the active display area. The
image which is outside of active diaplay area is not displayed.
Status
Power ON
Green
Power OFF
Red
Power Standby when
Red On
“SCHEDULE” is enable
Green Blinking
Power Standby
Diagnosis (Detecting failure)
Red, Green
Red Blinking
ZOOM
* See troubleshooting on page 32
Using Power Management
The LCD monitor follows the VESA approved DPM Power
Management function.
The power management function is an energy saving
function that automatically reduces the power consumption
of the display when the keyboard or the mouse has not been
used for a fixed period.
The power management feature on your new display has
been set to the “ON” mode. This allows your display to enter
a Power Saving Mode when no signal is applied. This could
potentially increase the life and decrease the power
consumption of the display.
ZOOM
Picture Mode
RGB 1, 2, 3
HIGHBRIGHT
STANDARD
sRGB
DVD/HD, VIDEO HIGHBRIGHT
STANDARD
CINEMA
Information OSD
RGB1, 2, 3
Selecting a video source
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
SIZE : FULL
To view a video source:
)
Audio input mode
Picture Size mode
Use the input button to set [VIDEO].
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your
video format.
DVD/HD
Picture Size
DVD/HD
AUDIO : 3
SIZE : WIDE
RGB 1, 2, 3
FULL
NORMAL
DVD/HD, VIDEO
FULL
NORMAL
Signal Type
NORMAL SIZE
Video Input mode
Input signal Information
Video Input mode
Audio input mode
Picture Size mode
CUSTOM
DYNAMIC
CUSTOM
Recommended Size
VIDEO<S>, VIDEO
NORMAL
VIDEO<S>
NTSC
AUDIO : 3
SIZE : NORMAL
Video Input mode
Input Signal Colour System mode
Audio input mode
Picture Size mode
4:3
DYNAMIC
PIP or POP
FULL
Squeeze
Main:RGB2
Sub:VIDEO<S>
RGB2
1024 x 768
48kHz 60Hz
AUDIO : 1
VIDEO<S>
NTSC
SIZE : FULL
English-19
Main picture Information
)
Sub picture Information
Main picture Information
English
Power Indicator
Power Indicator
OSD (On-Screen-Display) Controls
Press MENU button to
open Main menu. Press
UP or DOWN button to
select sub-menu.
Press SET button
to decide.
Press UP or DOWN, and PLUS or
MINUS button to select function, or
control which you like.
Press SET button to decide.
Press MENU or
EXIT button to exit.
Remote Control
SET
Press UP or DOWN
button to select.
Press INPUT button to
decide
Press UP or DOWN, and
PLUS or MINUS button to
select function, or control
which you like. Press INPUT
button to decide
Press EXIT button to exit.
Control Panel
INPUT
INPUT
UP or DOWN button
INPUT button
OSD screen
Main-Menu
PICTURE
Sub-Menu
Adjusts the overall image and background
screen brightness.
BRIGHTNESS
Press + button to increase brightness.
Press - button to decrease brightness.
Adjusts the image brightness in relation to the
input signal.
Press + button to increase contrast.
Press - button to decrease contrast.
NOTE: sRGB picture mode is standard and
cannot be changed.
CONTRAST
This function is digitally capable to keep crisp
image at any timings. It is adjustable to get a
distinct image or a soft one as you prefer and
set independently for each picture mode.
Press + button to increase sharpness.
Press - button to decrease sharpness.
SHARPNESS
Adjusts the image brightness in relation to the
background.
Press + button to increase black level.
Press - button to decrease black level.
NOTE: sRGB picture mode is standard and
cannot be changed.
BLACK LEVEL
Adjusts the noise reduction level.
NOISE REDUCTION
Press + button to increase reduction level.
Press - button to decrease reduction level.
*:INPUT VIDEO only
English-20
TINT
*:INPUT DVD/HD, VIDEO only
Adjust the color of the screen.
COLOR
Press + button to increase color depth.
Press - button to decrease color depth.
*:INPUT DVD/HD, VIDEO only
R, G, B: Increases or decreases Red,Green,
and Blue depending upon which is selected.
The change in color will appear on screen and
the direction (increase or decrease) will be
shown by the color bars.
NOTE: It can be adjusted only when USER is
selected by COLOR TEMPERATURE.
COLOR CONTROL
*:INPUT RGB1,2,3 only
Color temperature can be selected out of
5000K, 6500K and 9300K.
When USER is selected, R.G.B can be
adjusted individually.(RGB 1,2,3 only)
COLOR TEMPERATURE
Selecting Picture reset allows you to reset all
OSD settings about PICTURE setting.
Select "Yes" and press "SET" button to restore
to factory preset data.
Press "EXIT" button to cancel and then return
to the previous menu.
PICTURE RESET
Main-Menu
SCREEN
Sub-Menu
Controls Horizontal Image position within the
display area of the LCD.
H POSITION
Press + button to move screen to right.
Press - button to move screen to left.
Controls Vertical Image position within the
display area of the LCD.
V POSITION
Press + button to move screen to UP.
Press - button to move screen to DOWN.
Press + button to expand the width of the
image on the screen the right.
Press - button to narrow the width of the image
on the screen the left.
CLOCK
*:INPUT RGB2/3 only
Improves focus, clarity and image stability by
increasing or decreasing this setting.
CLOCK PHASE
*:INPUT RGB2/3 only
English-21
English
Adjust the tint of the screen.
Press + button the flesh tone color becomes
greenish.
Press - button the flesh tone color becomes
purplish.
ZOOM MODE
You can select “FULL”, “NORMAL” and
“CUSTOM”. (INPUT RGB1/2/3 only)
You can also select “FULL”, “NORMAL”
“DYNAMIC” and “CUSTOM”. (INPUT DVD/HD,
VIDEO<S> only)
Selecting “DYNAMIC” will make the screen
display panoramic with the expansion of the
middle and outside of the screen changed.
(The upper and the bottom of the image will be
cut by expansion.)
Dynamic image is the same as FULL size
image when HDTV signal is input.
CUSTOM ZOOM
“CUSTOM ZOOM” will be selected when you
select “CUSTOM” on the screen “ZOOM”
mode.
ZOOM: expands the horizontal and the vertical
size simultaneously.
HZOOM: expands the horizontal size only.
VZOOM: expands the vertical size only.
HPOSI: moves to the right with + button.
moves to the left with – button.
VPOSI: moves up with + button.
moves down with – button.
Adjusts the horizontal size by increasing or
decreasing the setting.
Press + button to expand the width of the
image on the screen.
Press - button to narrow the width of the image
on the screen.
H RESOLUTION
*:INPUT RGB1/2/3 only
Adjusts the vertical size by increasing or
decreasing the setting.
Press + button to expand the height of the
image on the screen.
Press - button to narrow the height of the image
on the screen.
V RESOLUTION
*:INPUT RGB1/2/3 only
Selecting Screen reset allows you to reset all
OSD settings from PICTURE setting.
Select "Yes" and press "SET" button to restore
the factory preset data.
Press "EXIT" button to cancel and then return to
the previous menu.
SCREEN RESET
Main-Menu
SOUND
Sub-Menu
Adjust the balance of L/R volume.
Press + button to move the stereo sound image
to right.
Sound of the left side will be small.
Press - button to move the stereo sound image
to left.
BALANCE
To accentuate or reduce the high frequency
sound.
Press + button to increase TREBLE sound.
Press - button to decrease TREBLE sound.
TREBLE
To accentuate or reduce the low frequency
sound.
Press + button to increase BASS sound.
Press - button to decrease BASS sound.
BASS
Selecting Audio reset allows you to reset all OSD
settings from AUDIO setting.
Select "YES" and press "SET" button to restore
the factory preset.
Press "EXIT" button to cancel and then return to
the previous menu.
AUDIO RESET
English-22
English
Main-Menu
PIP(PICTURE IN PICTURE)
Sub-Menu
Selecting the size of picture inserted at the
"Picture-in-Picture" (PIP) mode.
"Large", "Middle" and "Small" are available.
PIP SIZE
Selecting the sound source in PIP mode.
When selecting "MAIN AUDIO", you will get the
sound for the main picture and when selecting
"PIP AUDIO", you will get the sound for the
picture instead.
PIP AUDIO
Selecting PIP Reset allows you to reset all
OSD settings from PIP setting.
Select "Yes" and press "SET" button to restore
the factory preset data.
Press "EXIT" button to cancel and then return
to the previous menu.
PIP RESET
Main-Menu
CONFIGURATION 1
Sub-Menu
Press "SET" button to automatically adjust
screen size, horizontal position, vertical
position, clock, clock phase, white level and
black level.
Press "EXIT" button to cancel execution AUTO
SETUP and then will return to the previous
menu.
AUTO SETUP
*:INPUT RGB2/3 only
Selecting the auto adjust ON/OFF.
Selecting ON when changing the timing, the
horizontal position, vertical position and clockphase will adjust automatically.
AUTO ADJUST
*:INPUT RGB2/3 only
Selecting RGB "ON", the monitor will go to
power management mode when RGB1,2,3
sync is lost. Selecting VIDEO "ON", the
monitor will go to power management mode
after about 10 minutes delay from when
DVD/HD and VIDEO input signal is lost.
POWER SAVE
LANGUAGE
OSD control menus are available in seven
languages.
English-23
Select "SCREEN SAVER" functions to reduce
the risk of the "image persistence".
GAMMA: The display gamma is changed and
fixed when selected "ON".
COOLING FAN: The built in cooling fan is
always on when set "ON".
BRIGHTNESS: The brightness is decreased
when selected "ON".
MOTION: Image is slightly expanded and
moves 4 directions (UP, DOWN, RIGHT,
LEFT) periodically (Need setting the time for
movement).
Movement area is approximately +/- 10mm
from original position; Please locate the
important information such as text within 90%
area of screen image.
See note (1) for this functions.
PIP and STILL will be disabled when
"MOTION" is active.
SCREEN SAVER
Selecting the Color System depends on your
input video format.
AUTO: NTSC, PAL, SECAM, PAL60 or 4.43
NTSC is automatically selected.
NTSC: Specific selection of NTSC.
PAL: Specific selection of PAL.
SECAM: Specific selection of SECAM.
PAL-60: Specific selection of PAL60.
4.43NTSC: Specific selection of 4.43 NTSC.
COLOR SYSTEM
*:INPUT VIDEO only
Selecting the side black bar color white when
4:3 image displayed, black to white.
SIDE BORDER
COLOR
CONFIGURATION
RESET
Selecting the CONFIGURATION RESET allows
you to reset all configuration settings.
Select "Yes" and press "SET" button to restore
the factory preset data.
Press "EXIT" button to cancel and return the
previous menu.
FACTORY RESET
Selecting "YES" allows you to reset PICTURE,
SCREEN, AUDIO, CONFIGURATION1,2 and
ADVANCED OPTION will be back to factory
settings (except LANGUAGE, DATE & TIME
and SCHEDULE). Select "YES" and press
"SET" button to restore the factory preset
data. Press "EXIT" button to cancel and
return the previous menu.
English-24
English
Main-Menu
CONFIGURATION 2
Sub-Menu
The OSD control menu will stay on as long as
it is use. In the OSD Turn Off submenu, you
can select how long the monitor waits after the
last touch of a button to shut off the OSD
control menu. The preset choices are 5 -120
seconds.
OSD TURN OFF
Selects the information OSD display or not. The
information OSD will display when input signal
or source change or warning message like as
no-signal or out-of range.
A time between 1 to 10 seconds is available.
INFORMATION OSD
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can preset the
monitor to automatically power down.
OFF, 15, 30, 45 and 60 minutes are available.
When the OFF TIMER is set, the SCHEDULE
(see page 28) settings will be disabled.
OFF TIMER
Adjusts the horizontal position of the OSD
menu.
OSD H POSITION
OSD V POSITION
Adjusts the vertical position of the OSD menu.
Indicates the model and serial number of your
monitor.
MONITOR INFO
English-25
Main-Menu
ADVANCED OPTION
Sub-Menu
Selects to decision of input signal about below
timings, 1024x768, 1280x768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution as 1280x768
1360x768: Determines the resolution as 1360x768
INPUT RESOLUTION
*:INPUT RGB2/3 only
Selects a level of black expansion.
In case of go under the black cut-off level,
please adjust the "Black level" in moderation
on OSD menu.
BLACK LEVEL
EXPANSION
*:INPUT VIDEO only
Selects a display gamma.
2.2
2.4
S gamma
Native
NOTE: sRGB picture mode is standard and
cannot be changed.
GAMMA SELECTION
Changes the display area of the image.
OVERSCAN: Set to display area about 95%
UNDERSCAN: Set to display area about
100%
SCAN MODE
*:INPUT DVD/HD VIDEO only
Selects IP (Interlace to Progressive) converter
function. PROGRESSIVE: Enable the IP
function, to convert interlace signal to
progressive. Normally use this setting.
INTERLACE*: Disable the IP function.
*NOTE: This mode is better suited for motion
pictures, but it is in danger of image retention.
SCAN CONVERSION
Selects Film mode function.
AUTO: Enable the Film mode function. This
mode is better suited for movies, which is
converted 24 Frames/sec source to DVD Video.
We recommend to select "PROGRESSIVE" in
"SCAN CONVERSION".
OFF: Disable the Film mode function. This mode
is better suited for Broadcasting or VCR source.
FILM MODE
*:INPUT DVD/HD, VIDEO only
Selects the infrared wireless remote controller
mode.
The item in this menu will become effective by
pressing "SET" button on the selected item.
NORMAL: The monitor will be controlled
normally by wireless remote controller.
LOCK: Disable the monitor control by infrared
wireless remote controller.
Keep pressing "DISPLAY" button during 5 sec
or more, this setting will return to "NORMAL".
IR CONTROL
TILING demonstrates multiple screens. This
feature provides a single large screen using up
to 16 monitors. It will be able to divide up to 4
each H and V. This requires you to feed the
PC output into each of the monitors through a
distributor.
H MONITORS: Select number of horizontal divide.
V MONITORS: Select number of vertical divide.
POSITION: Select a position to expand the screen.
FRAME COMP: Works in tandem with TILING
to compensate for the width of the tile bezels in
order to accurately display the image.
ENABLE: Select "YES", the monitor will
expand the selected position. PIP and STILL
and "DYNAMIC" ZOOM mode will be disabled
when "TILING" is activated.
TILING
English-26
HEAT STATUS
Adjusts the delay time from "standby" to
"power on" mode.
"POWER ON DELAY" time is selectable
between 0 and 50 sec.
POWER ON DELAY
Adjusts the current date and time for internal
clock.
You should set this function when you use
"SCHEDULE".
DATE AND TIME
Programs the monitor's working
schedule.
Schedule the power on and power
off with hour and a day of the week.
Also sets the input port.
This OSD can't remove except EXIT.
(see "NOTE 2" on page 28 for further
information)
SCHEDULE
Selecting ADVANCED OPTION reset allows
you to reset all OSD settings from ADVANCED
OPTION settings, except for DATE & TIME,
and SCHEDULE.
Select "YES" and press "SET" button to restore
the factory preset data.
Press "EXIT" button to cancel and then return
the previous menu.
ADVANCED
OPTION RESET
English
NOTE 1: IMAGE PERSISTENCE
Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs
when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image
persistence is not permanent, but constant images being displayed for a long period of time should be avoided.
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image
was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving
screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Please set “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE” functions to further reduce the risk of Image persistence.
For long life use of Public Display
< Image Sticking of LCD Panel >
When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and
residual or "ghost" image of previous image may be observed. (Image Persistence)
Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated
along the displayed image, and it is observed permanently. (Image Sticking)
English-27
English
Information of status for COOLING FAN,
BRIGHTNESS and TEMPERATURE.
COOLING FAN comes to run when inside
temperature is over a guaranteed limit.
BRIGHTNESS comes to be decreased when
inside temperature is over guaranteed limit with
cooling fun.
In this case warning is displayed on the screen.
< Recommendations >
For preventing the fast transition to Image Sticking, and for longer life usage of LCD, following are recommended.
1. Fixed image should not be displayed for long period, and changed to another images with short cycle.
2. When no use, please turn off the monitor by remote control, or use Power Management Function of monitor or use Schedule
Function of monitor.
3. Reducing the environmental temperature is effective for long life use.
When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor, please
utilize the temperature sensors inside monitor.
To reduce the environmental temperature, the monitor should be set Low Brightness or Cooling Fan "ON" by using Screen sever
Function.
4. Please use "Screen Saver Mode" of monitor.
NOTE 2: HOW TO SETUP SCHEDULE
Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be
activated.
You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the
monitor will use for each scheduled activation period. A check mark in the box next to the number of the schedule indicates that
the selected schedule is in effect.
To select which schedule to set, use the up/down arrows to move the number (1 to 7) of the schedule.
Use the (+) and (-) buttons to move the cursor horizontally within the particular schedule. Use the ( ) and ( ) buttons to increase
time and select input port. The “SET” button is used to make a selection.
If you create a schedule but do not want to use a power on time, select “--” in the “ON” time slot.
If you do not want to use a power off time select “--” in the OFF time slot.
If there is no input selected (“--” showing in the input spot) the input from the previous schedule will be used.
The selection of EVERY DAY within a schedule takes priority over other schedules that are set up to operate weekly.
When schedules are overlapping, scheduled Power ON time has priority over scheduled Power OFF time.
If there are two schedules programmed for the same time, then the highest numbered schedule has priority.
When the “OFF TIMER” (see page 25) is set, the “SCHEDULE” function is disabled.
English-28
Controlling the LCD monitor via RS-232C Remote Control
English
This LCD monitor can be controlled by connecting a personal computer with a RS-232 terminal.
Functions that can be controlled by a personal computer are:
•
Power ON or OFF
•
Switching between input signals
Connection
LCD Monitor + PC
PC
RS-232C Cable
NOTE: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port
adapter is required. Contact your dealer for details.
* RS-232C out terminal can connect LDT371V only. Do not connect to other equipment.
1) Interface
PROTOCOL
RS-232C
BAUD RATE
9600 [bps]
DATA LENGTH
8 [bits]
PARITY BIT
NONE
STOP BIT
1 [bits]
FLOW CONTROL
NONE
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.
For RS-232C cable, the reverse type cable should be used.
2) Control command diagram
The command is structured by the address code, function code, data code and end code. The length of the
command is different for each function.
Address code
Function code
Data code
End code
HEX
30h 30h
Function
Data
0Dh
ASCII
'0' '0'
Function
Data
[Address code] 30h 30h (In ASCII code, '0' '0') fixed.
[Function code] A code of each fixed control move.
[Data code]
A code of each fixed control data (number) and not always indicated.
[End code]
0Dh (In ASCII code, '
' ) fixed.
English-29
3) Control sequence
(1) The command from a computer to the LCD monitor will be sent in 600ms.
(2) The LCD monitor will send a return command 600ms* after it has received and encoded. If the command isn’t
received correctly, the LCD monitor will not send the return command.
(3) The personal computer checks the command and confirms if the command, which has been sent, has been executed or not.
(4) This LCD monitor sends various codes other than return code. When having a control sequence by RS-232C, reject other
codes from personal computers side.
*: The sending time of return command may delay depending on the condition (during changing of the input signal, etc.).
Example: Turn the power ON ( ’ ’ is for ASCII code)
Sending commands
from the PC
Status code from
LCD monitor
30 30 21 0D
’0’ ’0’ ’!’ ’ ’
Meaning
Command for
POWER ON
30 30 21 0D
’0’ ’0’ ’!’ ’ ’
Command received
(Command echoed back)
4) Operation commands
The operation commands execute the basic operation setting of this LCD monitor.
It may not operate when changing the signal:
Operation
ASCII
HEX
POWER ON
!
21h
POWER OFF
"
22h
INPUT RGB 1
_r1
5Fh 72h 31h
INPUT RGB 2
_r2
5Fh 72h 32h
INPUT RGB 3
_r3
5Fh 72h 33h
INPUT VIDEO
_v1
5Fh 76h 31h
INPUT DVD/HD
_v2
5Fh 76h 32h
INPUT S-VIDEO*
_v3
5Fh 76h 33h
•
POWER OFF command should be operated over 1 minute after the power is turned on.
•
POWER ON command should be operated over 1 minute after the power is turned off.
* S-VIDEO is SEPARATE only
5) Read command
Host computer sends the command without Data-code to monitor.
After receiving this command, the monitor returns the command with Data-code of current status to host computer.
< ex. > When Host computer ask Power status of monitor, the status of monitor is powered-on.
Command from computer
30 30 76 50 0D
Command from Monitor
Detail of command
30 30 76 50 31 0D
Monitor is powered-on.
0''0'v''P'[enter]
Ask about the power status of monitor.
'0''0''v''P''1'[enter]
Structure of the Read-command
POWER
Input
Picture mode
Temperature
of Internal
monitor
ON
OFF(stand by)
RGB-1(DVI-D)
RGB-2(D-SUB)
RGB-3(BNC)
Video
DVD/HD
S-VIDEO
HIGHBRIGHT
STANDARD
resolution
Around
0.5˚C
AV board
resolution
1˚C
resolution
Around
0.5˚C
Power
resolution
PCB
1˚C
Function
vP
vP
vI
vI
vI
vI
vI
vI
vM
vM
ASCII
Data (Receive)
1
0
r1
r2
r3
v1
v2
v3
p1
p2
tcx1
(ex.) +25.0
tc1
(ex.) +25
tcx2
(ex.) +30.5
tc2
(ex.) +31
English-30
Function
76 50
76 50
76 49
76 49
76 49
76 49
76 49
76 49
76 4D
76 4D
74 63 78 31
74 63 31
HEX
Data (Receive)
31
30
72 31
72 32
72 33
76 31
76 32
76 33
70 31
70 32
2B 20 32 35
2E 30
2B 20 32 35
74 63 78 32
2B 20 33 30 2E 35
74 63 32
2B 20 33 31
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and
weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location
to another.
Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor
to a variety of standards.
sRGB Color Control: A new optimized color management standard which allows for color matching on computer displays
and other peripherals. The sRGB standard, which is based on a calibrated color space, allows for optimal color representation and backward compatibility with other common color standards.
OSD (On-Screen-Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple
to use on-screen menus.
Plug and Play: The Microsoft solution with the Windows 95/98/Me/2000/XP operating system facilitates setup and
installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your
computer, automatically optimizing display performance.
®
®
Intelligent Power Manager System: Provides innovative power-saving methods that allow the monitor to shift to a lower
power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and
lowering the air conditioning costs of the workplace.
Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying
the resolution required.
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.
VESA Standard Mounting Interface: Allows users to connect their LCD monitor to any VESA standard third party
mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device.
MITSUBISHI ELECTRIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in
North America.
DVI-D: The digital-only subset of DVI ratified by the Digital Display Working Group (DDWG) for digital connections between computers and displays. As a digital-only connector, analog support is not provided off a DVI-D connector. As a DVIbased digital only connection, only a simple adapter is necessary for compatibility between DVI-D and other DVI-based
digital connectors such as DFP and P&D.
TILING, Frame compensation: Demonstrates multiple screens with an accurate image and compensates for the bezel
width.
ZOOM: Expands the image individually for horizontal and vertical direction.
Self-diagnosis: When an internal error should occur, a failure state will be indicated.
English-31
English
Features
Troubleshooting
No picture
• The signal cable should be completely connected to the display card/computer.
• The display card should be completely seated in its slot.
• Front Power Switch and computer power switch should be in the ON position.
• Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
• Check the monitor and your display card with respect to compatibility and recommended settings.
•
Check the signal cable connector for bent or pushed-in pins.
Power Button does not respond
• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.
Image persistence
•
Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence
occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’
image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To
alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was
on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.
NOTE: As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving
screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.
Image is unstable, unfocused or swimming is apparent
•
•
•
•
Signal cable should be completely attached to the computer.
Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine adjustment.
When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.
Check the monitor and your display card with respect to compatibility and recommended signal timings.
If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.
Image of component signal is greenish
•
Check to see if the DVD/HD input connector is selected.
LED on monitor is not lit (no green or red color can be seen)
•
•
Power Switch should be in the ON position and power cord should be connected.
Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).
RED LED on monitor is blinking
•
A certain failure might have occurred, please contact your nearest authorized MITSUBISHI ELECTRIC service facility.
Display image is not sized properly
•
•
Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.
Check to make sure that a supported mode has been selected on the display card or system being used.
(Please consult display card or system manual to change graphics mode.)
Selected resolution is not displayed properly
•
Use OSD Display Mode to enter Information menu and confirm that the appropriate resolution has been selected.
If not, select corresponding option.
No Sound
•
•
•
Check to see if speaker cable is properly connected.
Check to see if mute is activated.
Check to see if volume is set at minimum.
Remote Control is not available
•
•
•
Check the Remote Control’s batteries status.
Check if batteries are inserted correctly.
Check if the Remote Control is pointing at the monitor’s remote sensor.
“SCHEDULE”/“OFF TIMER” function is not working properly
•
•
The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.
If the “OFF TIMER” function is enable and the power to the LCD monitor is turned off if the power supply is interrupted unexpectedly, then the “OFF TIMER” will be reset.
Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or degradation.
English-32
Specifications
Product Specifications
LCD Module
Frequency
Diagonal:
Pixel Pitch:
Resolution:
Color:
Brightness:
Contrast Ratio:
Response time:
View Angle:
Design View Distance:
Horizontal:
Vertical:
Pixel Clock
Viewable Size
Input Signal
PC-Input:
Analog Input
37"/94.0cm
0.600mm
1366 x 768 dots
Over 16 million colors (depending on video card used)
500cd/m2 (typ.)
1200:1 (typ.)
12ms (typ.)
Up 88°/Down 88°/Left 88°/Right 88°(typ.) @CR>10
1000mm/39.4inches
15.625/15.734kHz, 31.5kHz - 91.1kHz
50.0/58.0 - 85.0Hz
13.5MHz -165.0MHz
819.60 x 460.80mm/32.3 x 18.1inches
Digital Input
31.5kHz - 91.1kHz
50.0/58.0 - 85.0Hz
25.0MHz - 165.0MHz
Video: Analog RGB Video:0.7Vp-p
TMDS
Input impedance 75ohm
Sync: Separate HV sync: TTL level (Pos./Neg.)
Input Impedance:2.2K ohm
Input-terminal: BNC (R,G,B,H,V), 15Pin Mini D-sub
DVI-D (Digital)
VIDEO Input:
Composite:1.0Vp-p
Input impedance 75ohm BNC and RCA-PINJACK-INPUT
Y/C Y:1Vp-p C:0.286Vp-p Input
Impedance 75 ohm S-TERMINAL-INPUT
Component:1.0/0.7Vp-p
Input Impedance 75ohm BNC-INPUT
AUDIO Input:
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1
In: 9 Pin Mini D-sub
RS-232C:
Output Signal
Video: Analog RGB Video:0.7Vp-p with 75 ohm terminated
PC-Output:
Sync: Separate HV sync: TTL level (Pos./Neg.)
Output-terminal: 15Pin Mini D-sub
VIDEO Output:
BNC-OUTPUT x 1, Composite 1.0Vp-p with 75 ohm terminated
AUDIO Output:
RCA PIN-JACK L/R OUTPUT x 1, 0.15Vrms with 47k ohm terminated
Speaker Output:
External Speaker Jack 7W + 7W (8 ohm)
Resolutions Supported
640 x 480 at 60Hz to 85Hz
800 x 600 at 50Hz, 60Hz to 85Hz
1024 x 768 at 50Hz, 60Hz to 85Hz
1280 x 768 at 50Hz, 60Hz to 85Hz
1360 x 768 at 50Hz, 60Hz* to 85Hz
1280 x 1024 at 60Hz to 85Hz
1600 x 1200 at 60Hz.....................Maximum Resolution
* Recommended Resolution
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i
Power Supply
2.1 - 0.9A @100 - 240VAC, 50/60Hz
Power Consumption
Max 195W
Power Save: Less than 5W (Power button OFF/Main power switch ON)
Temperature: 5 - 40°C/ 41 - 104°F
Operational
Humidity: 20 - 80% (Without condensation)
Environment
Temperature: -20 - 60°C /- 4 - 140°F
Storage
Humidity: 20 - 80% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C
Environment
Net without stand: 909mm(W) x 545.8mm(H) x 133mm(D)/35.79"(W) x 21.49"(H) x 5.24"(D)
Dimension
Net with stand: 909mm(W) x 604.9mm(H) x 246mm(D)/35.79"(W) x 23.81"(H) x 9.69"(D)
Gross: 1045mm(W) x 710mm(H) x 346mm(D)/41.14"(W) x 27.95"(H) x 13.62"(D)
Net without stand: 44.1lbs/20kg (Approximately)
Weight
Net with stand: 48.5lbs/22kg (Approximately)
Gross: 62.83lbs/28.5kg
VESA compatible arm
12 Holes (100mm pitches)
mounting interface
Optional Multi-purpose Fix Mount
Complied Regulatory
UL60950-1/C-UL/TUV-GS/EN60950-1/BSMI/PSB/FCC-B/DOC-B/EN55022-B
and Guidelines
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/GOST
Power Management
VESA DPM
Plug & Play
VESA DDC2B, DDC/CI
Accessories
User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,
Clamper x 2, Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable folder,
Main switch cover
Note: Technical specifications are subject to change without notice.
English-33
English
Specifications
Pin Assignment
1) Analog RGB input (MiniDsub15p): R G B 2
Pin No
Name
1
Video Signal Red
2
Video Signal Green
3
Video Signal Blue
4
GND
5
DDC-GND
6
Red-GND
7
Green-GND
8
Blue-GND
Mini D-SUB 15P
1
9
+5V (DDC)
10
SYNC-GND
11
GND
12
DDC-SDA
13
H-SYNC
14
V-SYNC
15
DDC-SCL
5
6
10
11
15
2) S-VIDEO input: V I D E O
Pin No
Name
1
GND
2
GND
3
Y (Luminance)
4
C (Chroma)
3) Digital RGB input (DVI-D): R G B 1
Pin - Assignment of DVI connector:
1
TX2-
9
TX1-
17
TX0-
8
1
2
TX2+
10
TX1+
18
TX0+
3
Shield (TX2 / TX4)
11
Shield (TX1 / TX3)
19
Shield (TX0 / TX5)
4
NC
12
NC
20
NC
5
NC
13
NC
21
NC
6
DDC-Serial Clock
14
+5V power
22
Shield (TXC)
7
DDC-Serial Data
15
Ground
23
TXC+
8
NC
16
Hot plug detect
24
TXC-
16
9
24
17
4) RS-232 input
Pin No
Name
1
NC
2
RXD
3
TXD
4
NC
5
GND
6
NC
7
RTS
8
CTS
9
NC
Mini D-SUB 9P
1
6
English-34
5
9
MITSUBISHI Contact Information
North America
Europe
MESCA (Mitsubishi Electric Sales Canada Inc.)
http://www.mitsubishielectric.ca
Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2,
Canada
Sales
Phone
:+1-(905) 475-7728
Fax
:+1-(905) 475-7958
E-mail
:projectors@mitsubishielectric.ca
Technical
Phone
:+1-(905) 475-7728
Fax
:+1-(905) 475-7958
Customer Care
E-mail
:support@mitsubishielectric.ca
MEU-FRA (Mitsubishi Electric Europe B.V French Branch)
25, Boulevard des Bouvets 92 741, Nanterre CEDEX, France
Sales
Phone
:+33 (0)1 55-68-55-07
Fax
:+33 (0)1 55-68-57-31
Technical
Phone
:+33 (0)1 55-68-56-42
Fax
:+33 (0)1 55-68-57-31
MDEA (Mitsubishi Digital Electronics America, Inc.)
(Warranty Registration)
http://www.mitsubishi-presentations.com/
Presentation Products Division, 9351 Jeronimo Road, Irvine, CA 92618 U.S.A
Phone
Main Line
:+1-(949) 465-6000
Technical
:+1-(888) 307-0309
Product Information
:+1-(888) 307-0312
Technical Support
E-mail
:tsupport@mdea.com
MEU-GER (Mitsubishi Electric Europe B.V. German Branch)
http://www.mitsubishi-evs.de/
Gothaer Strasse 8, 40880 Ratingen, Germany
MEU-IR (Mitsubishi Electric Europe B.V. Irish Branch)
http://www.mitsubishi.ie/
Westgate Business Park, Ballymount, Dublin 24, Ireland
Sales
Phone
:+353-(0)1- 4198844
Fax
:+353-(0)1-4564422
Technical
Phone
:+353-(0)1-4198807
Fax
:+353-(0)1-4198895
MEU-IT (Mitsubishi Electric Europe B.V. Italian Branch)
Centro Direzionale Colleoni, Palazzo Persero-Ingresso 2, Via Paracelso 12, 20041
Agrate Brianza, Italy
Sales
Phone
:+39-(0)39-60531
Fax
:+39-(0)39-6053214
E-mail
:info.projector@it.mee.com
MEU-NL (MitsubishiElectric Europe B.V. Benelux Branch)
http://www.MitsubishiElectric.nl
Nijverheidsweg 23a, 3641 RP Mijdrecht, The Netherlands
Sales
Phone
:+31-297-282461
Fax
:+31-297-283936
E-mail
:info@mitsubishi.nl
Technical
Phone
:+31-297-282461
Fax
:+31-297-283936
E-mail
:info@mitsubishi.nl
MEU (MITSUBISHI ELECTRIC EUROPE B.V.)
http://www.mitsubishi-projector.ru/
Moscow Representative Office, 12/1 Goncharnaya St. 109240, Moscow, Russia
Sales
Phone
:+7 (095) 915 8602
Fax
:+7 (095) 915 8603
MEU-SP (Mitsubishi Electric Europe B.V. Spanish Branch)
http://www.mitsubishielectric.es/
Ctra. de Rubi, 76-80, 08190 Sant Cugat del Valles, Barcelona, Spain
Sales
Phone
:+34-93.565.31.54
Fax
:+34-93.589.43.88
E-mail
:mitsubishi.profesional@sp.mee.com
Technical
Phone
:+34-93.586.27.51
Fax
:+34-93.699.74.45
E-mail
:mitsubishi.profesional@sp.mee.com
MEU-SWE (Mitsubishi Electric Europe B.V Scandinavian Branch)
Hammarbacken 14, Box 750, S-19127, Sollentuna, Sweden
Sales
Phone
:+46-(0)8-6251070
Fax
:+46-(0)8-6251036
Technical
Phone
:+46-(0)8-6251052
Fax
:+46-(0)8-6251036
MEU-UK (Mitsubishi Electric Europe)
http://www.mitsubishi.co.uk/evs/
Visual Information Systems Division, Travellers Lane, Hatfield, Hertfordshire, AL10 8XB
Sales
Phone
:+44 (1707) 278684
Fax
:+44 (1707) 278541
E-mail
:projector.info@meuk.mee.com
Technical
Phone
:+44 (870) 606 5008
Fax
:+44 (1506) 431927
E-mail
:projector.info@meuk.mee.com
Russia (Mitsubishi Electric Europe B.V Moscow Representative Office)
52, bldg.5, Kosmodamianskaya Nab, 113054, Moscow, Russian Federation
Sales
Phone
:+7 (095) 721 2070
Fax
:+7 (095) 721 2071
Technical
Phone
:+7 (095) 721 2070
Fax
:+7 (095) 721 2071
Printed in China
AW-P0076A