Philips 46PFL8605/98 User manual

Register your product and get support at
www.philips.com/welcome
52PFL8605S/98
46PFL8605S/98
42PFL8605S/98
52PFL8605 /98
46PFL8605 /98
42PFL8605 /98
46PFL6605S/98
40PFL6605S/98
46PFL6605 /98
40PFL6605 /98
EN User manual
Downloaded From TV-Manual.com Manuals
Contents
2 Important 3
Automatically install channels 26
Manually install channels 26
Reorder stored channels 27
Rename channels 27
Hide and unhide channels 28
Set up your favorite channels 28
3 Your TV 5
7 Connect devices 29
1 Notice
2
Side controls and indicators 5
Remote control 5
4 Use your TV 7
Switch your TV on/off or to standby
Switch channels
Adjust TV volume
Watch connected devices
Use teletext
Use Ambilight
7
7
8
8
9
9
5 Use more of your TV 10
Change menu language 10
Access TV menus 10
Change picture and sound settings 11
Change Ambilight settings 15
Use advanced teletext features 16
Use timers 17
Use child and rating locks 17
Use subtitles 18
Use the TV clock 19
View photos, play music and watch video19
Listen to digital radio channels 21
Use universal access 21
Use Scenea to display a picture as TV
wallpaper 22
Update the TV software 23
Change TV preferences 24
Start a TV demo 25
Reset the TV to factory settings 25
Re-install the TV 25
Downloaded From TV-Manual.com Manuals
Connectors for PFL6605 29
Connectors for PFL8605 30
Connect a computer 30
Connect to a computer network (For
PFL8605) 32
Use HDMI ARC 36
Use Philips EasyLink 36
Use a Kensington lock 39
8 Product information 40
Supported display resolutions 40
Multimedia 40
Tuner/Reception/Transmission 41
Remote control 41
Power 41
Supported TV mounts 41
Dimensions 41
9 Troubleshooting 42
General TV issues 42
TV channel issues 42
Picture issues 43
Sound issues 43
HDMI connection issues 44
USB connection issues 44
Computer connection issues 44
Contact us 44
10 Index 45
EN
1
English
6 Install channels 26
1 Notice
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
The material in this manual is believed
adequate for the intended use of the system.
If the product, or its individual modules or
procedures, are used for purposes other than
those specified herein, confirmation of their
validity and suitability must be obtained. Philips
warrants that the material itself does not
infringe any United States patents. No further
warranty is expressed or implied.
Philips cannot be held responsible neither for
any errors in the content of this document
nor for any problems as a result of the content
in this document. Errors reported to Philips
will be adapted and published on the Philips
support website as soon as possible.
Pixel characteristics
This LCD product has a high number of
color pixels. Although it has effective pixels of
99.999% or more, black dots or bright points of
light (red, green or blue) may appear constantly
on the screen. This is a structural property of
the display (within common industry standards)
and is not a malfunction.
Open source software
This television contains open source software.
Philips hereby offers to deliver or make
available, upon request, for a charge no more
than the cost of physically performing source
distribution, a complete machine-readable copy
of the corresponding source code on a medium
customarily used for software interchange. This
offer is valid for a period of 3 years after the
date of purchase of this product. To obtain the
source code, write to:
2
EN From TV-Manual.com Manuals
Downloaded
Development Manager
Technology & Development
Philips Consumer Lifestyle
620A Lorong 1, Toa Payoh
TP1, Level 3
Singapore 319762
Warranty
No components are user serviceable. Do not
open or remove covers to the inside of the
product. Repairs may only be done by Philips
Service Centres and official repair shops. Failure
to do so shall void any warranty, stated or
implied.
Any operation expressly prohibited in
this manual, any adjustments, or assembly
procedures not recommended or authorised in
this manual shall void the warranty.
Copyright
All other registered and unregistered
trademarks are the property of their respective
owners.
®
Kensington and Micro Saver are registered US
trademarks of ACCO World corporation with
issued registrations and pending applications in
other countries throughout the world.
(For PFL8605 only)
Portions of this software are copyright © The
FreeType Project (www.freetype.org).
Windows Media is either a registered
trademark or trademark of Microsoft
Corporation in the United States and/or other
countries.
DLNA®, the DLNA logo and DLNA 1.5
Certified are trademarks, service marks,
or certification marks or the Digital Living
Network Alliance.
Read and understand all instructions before you
use your TV. If damage is caused by failure to
follow instructions, the warranty does not apply.
Safety
Risk of electric shock or fire!
• Never expose the TV to rain or water.
Never place liquid containers, such as
vases, near the TV. If liquids are spilt on
or into the TV, disconnect the TV from
the power outlet immediately. Contact
Philips Consumer Care to have the TV
checked before use.
• Never place the TV, remote control or
batteries near naked flames or other heat
sources, including direct sunlight.
To prevent the spread of fire, keep
candles or other flames away from the
TV, remote control and batteries at all
times.
•
Never insert objects into the ventilation
slots or other openings on the TV.
• When the TV is swiveled ensure that
no strain is exerted on the power cord.
Strain on the power cord can loosen
connections and cause arcing.
Risk of short circuit or fire!
• Never expose the remote control or
batteries to rain, water or excessive heat.
• Avoid force coming onto power plugs.
Loose power plugs can cause arcing or
fire.
Risk of injury or damage to the TV!
• Two people are required to lift and carry
a TV that weighs more than 55 lbs.
Downloaded From TV-Manual.com Manuals
•
When stand mounting the TV, use only
the supplied stand. Secure the stand to
the TV tightly. Place the TV on a flat, level
surface that can support the combined
weight of the TV and the stand.
• When wall mounting the TV, use only a
wall mount that can support the weight of
the TV. Secure the wall mount to a wall
that can support the combined weight of
the TV and wall mount. Koninklijke Philips
Electronics N.V. bears no responsibility
for improper wall mounting that results in
accident, injury or damage.
Risk of injury to children!
Follow these precautions to prevent the
TV from toppling over and causing injury to
children:
• Never place the TV on a surface covered
by a cloth or other material that can be
pulled away.
• Ensure that no part of the TV hangs over
the edge of the surface.
• Never place the TV on tall furniture (such
as a bookcase) without anchoring both
the furniture and TV to the wall or a
suitable support.
• Educate children about the dangers of
climbing on furniture to reach the TV.
Risk of overheating!
• Never install the TV in a confined space.
Always leave a space of at least 4 inches
or 10 cm around the TV for ventilation.
Ensure curtains or other objects never
cover the ventilation slots on the TV.
Risk of damage to the TV!
• Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed on the back
of the TV. Never connect the TV to the
power outlet if the voltage is different.
Risk of injury, fire or power cord damage!
• Never place the TV or any objects on the
power cord.
• To easily disconnect the TV power cord
from the power outlet, ensure that you
have full access to the power cord at all
times.
EN
3
English
2 Important
•
When you disconnect the power cord,
always pull the plug, never the cable.
• Disconnect the TV from the power
outlet and antenna before lightning
storms. During lightning storms, never
touch any part of the TV, power cord or
antenna cable.
Risk of hearing damage!
• Avoid using earphones or headphones at
high volumes or for prolonged periods of
time.
Low temperatures
• If the TV is transported in temperatures
below 5°C, unpack the TV and wait
until the TV temperature matches room
temperature before connecting the TV to
the power outlet.
Screen care
•
•
•
•
•
Avoid stationary images as much as
possible. Stationary images are images
that remain on-screen for extended
periods of time. Examples include:
on-screen menus, black bars and time
displays. If you must use stationary
images, reduce screen contrast and
brightness to avoid screen damage.
Unplug the TV before cleaning.
Clean the TV and frame with a soft,
damp cloth. Never use substances such as
alcohol, chemicals or household cleaners
on the TV.
Risk of damage to the TV screen! Never
touch, push, rub or strike the screen with
any object.
To avoid deformations and color fading,
wipe off water drops as soon as possible.
4
EN From TV-Manual.com Manuals
Downloaded
Disposal of your old product and
batteries
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When this crossed-out wheeled bin symbol
is attached to a product it means that the
product is covered by the European Directive
2002/96/EC. Please inform yourself about the
local separate collection system for electrical
and electronic products.
Please act according to your local rules and
do not dispose of your old products with your
normal household waste.
Correct disposal of your old product helps to
prevent potential negative consequences for
the environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed with normal household
waste.
Please inform yourself about the local rules
on separate collection of batteries because
correct disposal helps to prevent negative
consequences for the environmental and
human health.
3 Your TV
English
Remote control
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your TV at
www.philips.com/welcome.
1
2
3
This section gives you an overview of
commonly used TV controls and functions.
4
Side controls and indicators
1
2
5
5
6
7
8
13
9
12
10
3
4
11
6
a
b
5
+/- : Increases or decreases volume.
: Accesses the home menu.
c P/CH +/- : Switches to the next or
previous channel.
d
: Switches Ambilight on or off.
e Power switch
f Remote control sensor/ Ambient sensor
a
b
Downloaded From TV-Manual.com Manuals
•
•
(Standby-On)
Switches the TV to standby if it is on.
Switches on the TV if it is in standby.
(Home)
Accesses the home menu.
EN
5
c
(Browse)
Accesses the browse menu to select:
• channel list
• Teletext
d
(Navigation buttons)
Navigates menus.
e
•
•
•
(Previous/Next)
Skips to the previous or next
channel.
Skips to the previous or next page of
the menu.
Skips to the previous or next track,
album or folder.
f OK
Confirms an entry or selection.
g
(Experience)
Accesses the experience bar menu.
h
(Options)
Accesses options for the current activity
or selection.
i +/- (Volume)
Increases or decreases volume.
j Color buttons
Select tasks or options.
k 0-9 (Numeric buttons)
Select a channel or setting.
l
m
(Mute)
Mutes or restores volume.
•
•
(Back)
Returns to a previous menu screen.
Press and hold to return to watching
TV.
6
EN From TV-Manual.com Manuals
Downloaded
Switch channels
•
Press P/CH +/- on the side of the TV.
•
Press
•
Press
to skip to the previous or next
channel.
Enter a channel number using the
Numeric buttons.
English
4 Use your TV
This section helps you perform basic TV operations
(see ‘Use more of your TV’ on page 10).
Switch your TV on/off or to
standby
To switch on
• Press the Power switch at the bottom of
the TV.
To switch on/ off to standby
• Press (Standby-On) on the remote
control.
To switch off
• Press the Power switch at the bottom of
the TV.
•
on the remote control.
Tip
•• When you use a favorite list, you can only
select those channels in the list.
to skip to the
previous or next page of preset channels.
•• At the channel list, press
Tip
•• Though your TV consumes very little power
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
•• If you cannot locate your remote control and
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
Downloaded From TV-Manual.com Manuals
EN
7
Adjust TV volume
Watch connected devices
Note
•• For easy access, add new devices to the home
menu before selecting them.
Add a device to the home menu
Connect and switch on devices before adding
them to the home menu.
To increase or decrease volume
• Press+/- on the remote control.
• Press
+/- on the side of the TV.
To mute or unmute sound
• Press to mute the sound.
• Press again to restore the sound.
Note
1
Press (Home).
»» The home menu appears.
Watch TV
Browse USB
B
Browse PC
Scenea
Add your devices
Setup
•• Use the [Sound] menu to adjust headphone
volume (see ‘Manually adjust sound settings’
on page 15).
2
3
8
EN From TV-Manual.com Manuals
Downloaded
Press the Navigation buttons to select
[Add your devices] and press OK.
»» A message appears with [Start]
selected, prompting you to start the
add new device guide.
Press OK.
»» Follow the on-screen instructions.
When the guide is complete, a new
device icon is added to the home
menu.
•• To avoid screen clutter, remove devices from
the home menu when they are no longer
connected (see ‘Remove devices from the
home menu’ on page 11).
Select a device via the home menu
1
2
3
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select a
device.
Press OK to confirm your choice.
»» The TV switches to the selected
device.
1
2
3
4
English
Use Ambilight
Tip
Press
(Experience).
»» The experience bar appears.
Press the Navigation buttons to select
[Ambilight], then press OK.
Press the Navigation buttons to select
[On] or [Off].
Press OK to confirm your choice.
Tip
•• When watching TV, you can also press
on
the side of the TV to switch Ambilight on or
off.
•• To use Ambilight as a lounge light during TV
standby, press on the side of the TV.
Use teletext
Set Ambilight active mode
1
You can set the speed at which Ambilight
responds to on-screen images.
2
3
4
Press (Browse).
»» The browse menu appears.
Press the Navigation buttons to select
[Teletext], then press OK.
»» The teletext screen appears.
To select a page:
• Enter the page number with the
Numeric buttons.
• Press or to view the next or
previous page.
• Press the Color buttons to select a
color coded item.
• Press to return to the previously
viewed page.
Press
(Browse) to exit teletext.
Downloaded From TV-Manual.com Manuals
1
2
3
4
5
Press
(Experience).
»» The experience bar appears.
Press the Navigation buttons to select
[Ambilight active mode], then press OK.
»» The [Ambilight active mode] bar
appears.
Press the Navigation buttons to move
the slider to adjust Ambilight response.
Press OK to confirm your choice.
Press
to exit.
Note
•• Before you can change the Ambilight active
mode, set [Home] >[Ambilight] >[Colour]
to [Dynamic]. More information and other
advanced Ambilight features are available (see
‘Change Ambilight settings’ on page 15).
EN
9
5 Use more of
your TV
Change menu language
Note
•• Skip this step if your language settings are
correct.
1
2
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
»» The [Setup] menu appears.
Select [Advanced TV settings], then
press OK.
Select [Preferences] > [Menu language]
and press OK.
»» A list of languages appears.
Press the Navigation buttons to select a
menu language.
Press OK to confirm your choice.
»» The selected language is applied to the
menu.
More language settings
In addition to [Menu language], you can
configure the following language settings via
the [Languages] menu (Available in some
cities where digital channels is available only):
1
2
3
4
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then select OK.
Select [Automatic channel search] >
[Advanced channel settings], then press
OK.
Select [Languages], then press OK.
10 EN From TV-Manual.com Manuals
Downloaded
5
6
Select a setting then press OK to adjust
the setting.
Press OK to confirm your choice.
The following language settings can be
configured.
• [Primary audio]/ [Secondary audio]
Select primary and secondary audio
languages for digital channels.
• [Primary subtitles]/ [Secondary subtitles]
Select primary and secondary subtitle
languages for digital channels.
• [Primary teletext]/ [Secondary teletext]
Select primary and secondary teletext
languages for digital channels.
• [Hearing impaired]
Select [On] to display subtitles with
primary and secondary audio languages.
• [Preferred audio format]
Select [Advanced] to receive advanced
audio formats (AAC, EAC-3, AC-3),
available only if provided by the local
broadcaster. Select [Standard] to receive
standard audio format (MPEG).
• [Mono/Stereo]
Selects mono or stereo if stereo
broadcast is available.
Access TV menus
Menus help you to install channels, change
picture and sound settings and access other
features.
Access the home menu
The home menu gives you easy access to
connected devices, picture and sound settings,
and other useful features.
1
Press (Home).
»» The home menu appears.
Watch TV
Browse USB
B
Browse PC
Scenea
Press OK.
»» Follow the on-screen instructions to
remove the device. Once complete, the
device is removed from the home menu.
Add your devices
Setup
Access the browse menu
1
2
3
Press the Navigation buttons to select a
home menu item:
• [Watch TV]Switches back to the
antenna source if another source is
selected.
• [Browse USB]Accesses the content
browser of the connected USB
storage device.
• (For PFL8605 only)[Browse
PC]Accesses the content browser of
the connected PC network.
• [Scenea]Switches to the Scenea
wallpaper.
• [Add your devices]Adds new devices
to the home menu.
• [Setup]Accesses menus to change
picture, sound and other settings.
2
3
When watching TV, press (Browse).
»» The browse menu appears.
Press
to select:
• [Channel list] Accesses TV channel list.
• [Teletext] Accesses teletext.
Press OK to confirm your choice.
Change picture and sound
settings
Change picture and sound settings to suit your
preferences. You can apply pre-defined settings
or change settings manually.
Note
•• The flexibility to change settings is limited if the
TV location is set to [Shop] mode. Set the TV
location to [Home] mode to access all TV settings
(see ‘Change TV preferences’ on page 24).
Press OK to confirm your choice.
Tip
•• Press
•• Press
•• Press
(Home) to exit the home menu.
(Back) to exit the [Setup] menu.
(Options) to exit an options menu.
Use settings assistant
Use the settings assistant to guide you through
the picture and sound settings.
Remove devices from the home menu
1
If a device is no longer connected to the TV,
remove it from the home menu.
2
1
2
3
Press (Home).
»» The home menu appears.
3
Press the Navigation buttons to select a
device to remove.
Press (Options).
»» A list appears, with [Remove this
device] selected.
Downloaded From TV-Manual.com Manuals
4
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Personalise picture and sound],
then press OK.
»» A message appears prompting you to
start the settings assistant.
Select [Start] and press OK.
»» Follow the on-screen instructions.
EN
11
English
4
Use pre-defined picture settings
Use the[Smart picture] experience bar to
access frequently used picture settings.
Note
•• All picture settings are available via the
[Picture]menu (see ‘Manually adjust picture
settings’ on page 12).
1
2
3
4
5
When watching TV, press
(Experience).
»» The experience bar appears.
Press the Navigation buttons to select
[Smart picture], then press OK.
Select a smart setting:
• [Personal]: Applies the settings you
have selected in the [Personalise
picture and sound] menu.
• [Vivid]: Applies rich and dynamic
settings, ideal for daylight use.
• [Natural]: Applies a natural setting.
• [Cinema]: Applies settings for
watching movies.
• [Game]: Applies settings for gaming.
• [Energy saving]: Applies the most
energy conscious settings. Factory
standard settings.
• [Standard]: Adjusts picture settings
to suit most environments and types
of video.
• [Photo]: Applies settings for viewing
photos.
• [Custom]: Applies the stored
adjustments you have made to a
smart picture setting.
Press OK to confirm your choice.
»» The smart setting is applied.
Press
(Back) to exit.
12 EN From TV-Manual.com Manuals
Downloaded
Manually adjust picture settings
1
2
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [Picture], then press OK.
Press
to select a setting.
Press OK to access and adjust the setting.
The following picture settings can be
configured. Depending on the format of the
picture source, some picture settings are not
available.
• [Smart picture]: Accesses pre-defined
smart picture settings.
• [Reset]: Resets to factory default settings.
• [Contrast]: Adjusts the intensity of bright
areas, keeping dark areas unchanged.
• [Brightness]: Adjusts the intensity and
details of dark areas.
• [Colour]: Adjusts color saturation.
• [Hue]: Compensates color variations in
NTSC encoded transmissions.
• [Sharpness]: Adjusts sharpness in the
image.
• [Noise reduction]: Filters and reduces
noise in an image.
• [Tint]: Adjusts the color balance in an
image.
Note
•• Before you adjust [Custom tint], select [Tint]
> [Custom], then press OK to enable the
option.
•
•
[Custom tint]: Customizes tint setting.
[Pixel Plus HD]: Accesses advanced
settings:
• [HD Natural Motion]: Reduces field
and line flicker to display movement
smoothly.
•
•
•
•
•
Downloaded From TV-Manual.com Manuals
Change picture format
1
2
3
4
Press
(Experience).
»» The experience bar appears.
English
[100 Hz Clear LCD]: Sets the
TV refresh rate to a maximum of
100Hz to provide superior motion
sharpness, better black level, high
contrast with a flicker free, quiet
image and a larger viewing angle.
• [Super resolution]/[Advanced
sharpness]: Enables superior
sharpness, especially lines and
contours in the picture.
• [Dynamic contrast]: Enhances
contrast.
• [Dynamic backlight]: Adjusts
brightness of the TV backlight to
match lighting conditions.
• [MPEG artefact reduction]: Smooths
out transitions on digital pictures.
You can switch this feature on or off.
• [Colour enhancement]: Makes
colors more vivid and improves
the details in bright colors. You can
switch this feature on or off.
• [Gamma]: Adjusts the midtones
intensity in the picture. Black and
white are not affected.
[PC mode]: Enables picture settings
adjustment when a PC is connected to
the TV via HDMI. If enabled, you can
select [Picture format] > [Unscaled]
which provides maximum detail for
display of PC content.
[Light sensor]: Adjusts settings
dynamically to match lighting conditions.
[Picture format]: Changes the picture
format.
[Screen edges]: Changes the picture size.
[Picture shift]: Adjusts the position of the
picture.
•
Press the Navigation buttons to select
[Picture format], then press OK.
Press the Navigation buttons to select a
picture format.
»» The selected picture format is
previewed.
Press OK to confirm your choice.
»» The selected picture format is applied.
Tip
•• Picture formats are also accessible via the
[Setup]menu.
The following picture formats can be selected.
Note
•• Depending on the picture source, some
picture formats are not available and will not
be seen on-screen.
•• Before you adjust [Unscaled], select [Picture]
> [PC mode] > [On], then press OK to
enable the option.
EN
13
[Auto fill]
Adjusts the
picture to fill the
screen (subtitles
remain visible).
Recommended
for minimal
screen distortion
(but not for HD
or PC).
[Auto
Enlarges the
zoom]
picture to fill
the screen.
Recommended
for minimal
screen distortion
(but not for HD
or PC).
[Movie
Scales the classic
expand
4:3 format
16:9]
to 16:9. Not
recommended
for HD or PC.
[Super
Removes the
zoom]
black bars on
the sides of 4:3
broadcasts. Not
recommended
for HD or PC.
[Unscaled] Provides
maximum
detail for PC.
Only available
when[PC mode]
is enabled in the
[Picture] menu.
[Wide
Stretches the
screen]
classic 4:3 format
to 16:9.
Shift picture position
1
2
3
4
Press the Navigation buttons to select
[Picture shift], then press OK.
Press the Navigation buttons to adjust
the position of the picture.
Press OK to confirm your choice.
Tip
•• Picture shift is also accessible via the
[Setup]menu.
Use pre-defined sound settings
Use the [Smart sound] experience bar to
access frequently used picture settings.
Note
•• All picture settings are available via the
[Sound]menu.
1
2
3
4
5
14 EN From TV-Manual.com Manuals
Downloaded
Press
(Experience).
»» The experience bar appears.
When watching TV, press
(Experience).
»» The experience bar appears.
Press the Navigation buttons to select
[Smart sound], then press OK.
Select a smart setting:
• [Personal]: Applies personal
preferences set in the [Sound]
menus in [Setup].
• [Standard]: Adjusts sound settings
to suit most environments and types
of audio.
• [News]: Applies settings for spoken
audio, such as news.
• [Movie]: Applies settings for movies.
• [Game]: Applies settings for gaming.
• [Drama]: Applies settings for drama.
• [Sports]: Applies settings for sports.
Press OK to confirm your choice.
»» The smart setting is applied.
Press
(Back) to exit.
1
2
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Change Ambilight settings
You can adjust Ambilight color, brightness, and
mode to your taste.
1
2
Select [Sound], then press OK.
Press
to select a setting.
Press OK to access and adjust the setting.
The following sound settings can be
configured. Depending on the broadcast,
some sound settings may not be available.
• [Smart sound]: Accesses pre-defined
smart sound settings.
• [Reset]: Resets to factory default settings.
• [Bass]: Adjusts the bass level.
• [Treble]: Adjusts the treble level.
• [Surround]: Enables spatial sound.
• [Volume]: Adjusts the volume.
• [Headphones volume]: Adjusts
headphone volume.
• [Auto volume leveling]: Automatically
reduces sudden volume changes, for
example, when switching channels.
Downloaded From TV-Manual.com Manuals
English
Manually adjust sound settings
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
»» The [Setup] menu appears.
Select [Advanced TV settings] and press OK.
Select [Ambilight] and press OK.
Press
to select a setting.
Press OK to access and adjust an
Ambilight setting.
The following Ambilight settings can be
configured:
• [Ambilight]: Turns Ambilight on or off.
• [Dynamic]: Sets an Ambilight setting
between relaxed and dynamic
levels. This feature is only available
when Ambilight [Colour] is set to
[Dynamic].
• [Brightness]: Changes the light
output from Ambilight.
• [Colour]: Selects a predefined color
setting or a customized color setting.
• [Custom colour]: Allows fine tuning
of predefined colors.
• [Separation]: Sets the difference
in Ambilight color level between
the sides of the TV. Setting this
feature off gives a dynamic, uniform
Ambilight color.
• [TV switch off]: Selects how the TV
will be switched off.
• [Lounge light mood]: Selects a
lounge light mode. This setting is
applied when the lounge light is
enabled in standby mode.
• [Scenea lounge light]: Turns Scenea
lounge light on or off.
• [Wall colour]: Selects a color
to match the wall color so that
Ambilight colors are adjusted to
display correctly.
EN
15
Use advanced teletext
features
Access the teletext options menu
Access the teletext features through the
teletext options menu.
1
2
3
4
5
When watching TV, press
(Browse).
Select teletext subpages
A teletext page can hold several subpages.
Subpages are displayed on a bar next to the
main page number.
1
When available on a teletext page, press
or to select subpages.
Select [Teletext], then press OK.
Search teletext
Press (Options).
»» The teletext options menu appears.
Search a teletext page by subject or word.
1
Select an option:
• [Freeze page]Freezes the current
page.
• [Dual screen]/[Full screen]Enables
and disables dual screen teletext.
• [Reveal]Hides or reveals hidden
information on a page, such as
solutions to riddles or puzzles.
• [T.O.P. overview] Table Of Pages
teletext broadcast allow you to jump
from one subject to another without
entering page numbers.
• [Enlarge]/[Normal view] Enlarge the
teletext page. Press the Navigation
buttons to move around the
enlarged screen.
• [Cycle subpages]Cycles through
subpages automatically if subpages
are available.
• [Languages]Switches to a different
language group to display a language
correctly when it uses a different
character set.
2
Press OK to confirm your choice.
Tip
•• To exit the options menu, press
(Options).
16 EN From TV-Manual.com Manuals
Downloaded
3
4
When in teletext, press OK to highlight
the first word or number.
Press the Navigation buttons to skip to
the word or number.
Press OK to begin the search.
Press until no word or number is
highlighted to exit the search.
Use Teletext 2.5
Teletext 2.5 offers more colors and better
graphics than normal teletext. If Teletext 2.5
is broadcast by a channel, it is switched on by
default.
1
2
3
4
5
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [Preferences] > [Teletext 2.5],
then press OK.
Select [On] or [Off], then press OK.
Use child and rating locks
You can set timers to switch the TV to standby
at a specified time.
You can prevent your children from watching
TV by locking the TV and using age ratings.
Automatically switch the TV to
standby (sleep timer)
Set or change the child lock code
Sleep timer switches the TV to standby after a
pre-defined period of time.
Tip
•• You can always switch off your TV earlier or
1
2
3
reset the sleep timer during the countdown.
1
2
3
4
5
6
7
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings] and press
OK.
Select [Preferences] > [Sleeptimer] and
press OK.
»» The [Sleeptimer] menu appears.
Press the Navigation buttons to set the
sleep time.
»» The sleep timer can be set up to 180
minutes, in steps of five minutes. If set
to zero, the sleep timer is switched off .
4
5
6
7
English
Use timers
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Automatic channel search] >
[Advanced channel settings], then press
OK.
Select [Child lock] > [Set code]/[Change
code].
»» The [Set code]/ [Change code] menu
appears.
Enter the code with the Numeric
buttons.
Press OK.
»» A message appears to confirm that
your code is set.
Press
(Back) to exit.
Tip
•• If you forget your code, enter ‘8888’ to
override any existing codes.
Press OK to activate the sleep timer.
»» The TV switches to standby after the
pre-defined period of time.
Press
(Back) to exit the menu.
Downloaded From TV-Manual.com Manuals
EN
17
Use subtitles
Set age ratings
Some digital broadcasters rate their programs
according to age. You can set your TV to
display only programs with age ratings higher
than your child’s age.
1
2
3
4
5
6
7
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Automatic channel search] >
[Advanced channel settings], then press
OK.
Select [Child lock] > [Parental rating],
then press OK.
Enter the code with the Numeric
buttons.
»» The [Parental rating] menu is now
available.
Select the preferred age rating and press OK.
Press
2
3
4
5
6
7
Enable or disable subtitles on TV
channels
1
2
3
4
(Back) to exit.
Lock or unlock one or more channels
1
You can enable subtitles for each TV channel.
Subtitles are broadcast via teletext or DVB-T
digital broadcasts. With digital broadcasts, you
can select a subtitle language.
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
Enter the child lock code with the
Numeric buttons.
»» The [Child lock] menu appears.
3
18 EN From TV-Manual.com Manuals
Downloaded
Press OK to confirm.
»» Subtitles are enabled or disabled.
•• When you select a subtitle language on
1
(Back) to exit.
Select one of the following:
• [On]: Enables subtitles.
• [Off]: Disables subtitles.
• [On during mute]: Displays subtitles
only when audio is muted.
Note
Select [Child lock] > [Channel lock],
then press OK.
»» A message appears prompting you to
enter the child lock code.
Once complete, Press
Press the Navigation buttons to select
[Subtitles], then press OK.
Select a subtitle language on digital TV
channels
Select [Automatic channel search] >
[Advanced channel settings], then press OK.
Select the channel to lock and press OK.
Repeat this step to lock more channels.
»» The locked channels are marked with
a ‘X’.
When watching TV, press (Options).
»» The options menu appears.
2
When watching TV, press (Options).
»» The options menu appears.
Press the Navigation buttons to select
[Subtitle language], then press OK.
Select the preferred language and press
OK to confirm.
Note
•• Select preferred subtitle languages in the
[Languages]menu (see ‘More language settings’
on page 10). Subtitles automatically appear in
the preferred languages when enabled.
Enable automatic TV clock
If your selected country supports digital
broadcast, the clock displays the time data
from your TV service operator as default.
1
2
3
4
5
Press
Select [Advanced TV settings], then
press OK.
Select [Preferences] > [Clock] > [Auto
format mode] > [Automatic], then press
OK.
(Home) to exit.
Set the TV clock manually
In some countries, you may need to set TV
clock manually.
1
2
3
4
5
6
7
8
Press
(Home).
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [Preferences] > [Clock] > [Auto
format mode] > [Manual], then press
OK.
Select [Date] or [Time], then press OK.
Press
Caution
•• Philips is not responsible if your USB storage
device is not supported nor is it responsible for
damage or loss of data from use of this feature.
(Home).
Press the Navigation buttons to select
[Setup], then press OK.
Press
View photos, play music and
watch video
English
Use the TV clock
Your TV is fitted with a USB connector that
enables you to view to view photos, listen
to music or watch movies stored on a USB
storage device.
(For PFL8605) Your TV also has a network
connector, enabling you to access and play
media files directly from your computer.
Connect a USB storage device and
enter the content browser
1
2
3
Connect the USB device to the USB port
on the side of the TV.
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Browse USB], then press OK.
»» The content browser appears.
Note
•• If you connect multiple USB storage devices via
USB hub, a message appears prompting you to
select a device. Press the Navigation buttons to
select the device, then press OK to confirm.
to enter the date or time.
Select [Done] to confirm.
Press
(Home) to exit.
Disconnect a USB storage device
Caution
•• Follow this procedure to avoid damage to your
USB storage device.
1
2
Downloaded From TV-Manual.com Manuals
Press (Home) to exit the USB content
browser.
Wait five seconds before disconnecting
the USB storage device.
EN
19
Connect to a network and enter the
content browser (For PFL8605)
•
Before accessing the content browser, be
sure that the TV is connected to a computer
network.
•
•
1
2
2
3
In the content browser, press the
Navigation buttons to select a photo.
Press OK.
»» A slideshow begins from the selected
image.
Press:
• OK during the slide show to pause
the slideshow and display the
photo grid . Press to resume the
slideshow.
•
/ to go back or move forward to
the next image.
•
/ to go back to the previous or
move forward to the next album/
folder.
•
(Options) to display more
slideshow options.
Change slideshow settings
1
2
•
Press the Navigation buttons to select
[Browse PC], then press OK.
»» The content browser appears.
Watch a slideshow of your photos
1
•
When watching TV, press (Home).
»» The home menu appears.
When viewing a slideshow, press
(Options).
»» The options menu appears.
Press the Navigation buttons to select
and adjust:
• [Show info]: Displays the picture
name, date, size and next picture in
the slide show.
• [Stop]: Stops play.
• [Rotate]: Rotates a picture.
20 EN From TV-Manual.com Manuals
Downloaded
•
•
3
[Play once]: Plays the collection of
pictures once. The slideshow stops
when the collection is complete.
[Repeat]: Repeats the slideshow.
[Shuffle on]: Displays pictures in the
slideshow at random.
[Shuffle off]: Disables random
display of pictures in the slideshow.
[Slideshow speed]: Sets the amount
of time that a picture is shown.
[Slideshow transition]: Sets the
transition from one picture to the next.
[Set as Scenea]: Sets the slide show
as the SCENEA wallpaper..
Press OK to confirm your choice.
»» The slide show setting is applied.
Listen to music
1
2
3
4
In the USB content browser, press the
Navigation buttons to select a song.
Press OK.
»» The song starts to play in the music player.
Press:
•
/ to skip to the next or previous
song.
•
/ to fast-forward or rewind a
song.
• OK to play or pause a song.
Press OK to stop play and exit to the
USB content browser.
Change music settings
1
2
When in the music player, press
(Options).
»» The options menu appears.
Press the Navigation buttons to select
and adjust:
• [Stop music]: Stops play.
• [Play once]: Disables repeat play and
plays a song or album once.
• [Repeat]: Repeats a song or an
album.
• [Shuffle on] /[Shuffle off]: Enables or
disables random play of songs.
Press OK to confirm your choice.
»» The music setting is applied.
Note
•• Slideshow settings are also available by
pressing (Options) when in the content
browser.
Watch video
1
2
3
4
In the USB content browser, press the
Navigation buttons to select a video.
Press OK.
»» The video starts to play in the video
player.
Use these buttons on the remote control:
• press and hold / to fast-forward
or rewind a video.
• press OK to play or pause a video.
Press OK to stop play and exit to the
USB content browser.
Change video settings
1
2
3
During video play, press (Options).
»» The options menu appears.
Press the Navigation buttons to select
and adjust:
• [Show info]: Displays the video title,
date and size.
• [Stop movie]: Stops play.
• [Full screen]: Plays video across the
whole screen.
• [Small screen]: Plays video in a small
screen.
• [Play once]: Disables repeat play, and
plays a video once only.
• [Repeat]: Repeats a video.
• [Shuffle on] /[Shuffle off]: Enables or
disables random play of videos.
Press OK to confirm your choice.
»» The video setting is applied.
Downloaded From TV-Manual.com Manuals
Listen to digital radio channels
If digital broadcasting is available, digital radio channels
are installed automatically during installation.
1
2
3
4
5
While watching TV, press
.
Select [Channel list], then press OK.
In the channel list, press .
Select [Select list] > [Radio], then press OK.
Select a radio channel, then press OK.
Use universal access
Enable universal access
Where supported by your digital TV
broadcaster, this TV allows special audio and
subtitles for the hearing impaired, as well as
special audio for the visually impaired.
To enable these features, you must turn on
universal access in the [Preferences] menu.
1 Press .
2 Select [Setup] > [Advanced TV settings],
then press OK.
3 Select [Preferences] > [Universal access]
> [On], then press OK.
Enable settings for hearing impaired
(Only available in some cities) Some digital TV
channels broadcast special audio and subtitles
adapted for people who are hearing impaired.
1 While watching TV, press .
2 Press the red button to select [Hearing
impaired].
3 Press the green button to switch on
hearing impaired audio and subtitles,
press the red button to switch it off.
4
Press
to exit.
Tip
•• To verify whether a hearing impaired audio
language is available, press and select [Audio
language]. Languages with an ear icon indicate
hearing impaired support.
EN
21
English
3
Enable settings for visually impaired
2
(Only available in some cities) Some digital TV
channels broadcast special audio adapted for
people who are visually impaired. The normal
audio is mixed with extra commentary.
3
1
2
3
4
While watching TV, press
.
Press the green button to select [Visually
impaired].
Use the following buttons to select:
• Green - [Speakers]: Hear visually
impaired audio from speakers only.
• Yellow - [Headphones]: Hear visually
impaired audio from headphones
only.
• Blue - [Speakers + headphones]:
Hear visually impaired audio from
speakers and headphones only.
• Red - [Off]: Turn off visually impaired
audio.
Press
to exit.
1
2
3
In the [Visually impaired] menu, press
the yellow button to select [Mixed
volume].
Press the Navigation buttons to move
the slider up or down, then press OK.
Press
to exit.
Audio feedback for visually impaired
This feature enables audio feedback when
buttons are pressed on the remote control
or TV.
1
In the [Visually impaired] menu, press
the blue button to select [Key beep].
22 EN From TV-Manual.com Manuals
Downloaded
to exit.
You can use Scenea to display a picture as
wallpaper on your TV. Make sure that the
location of your TV is set to home (see ‘Change
TV preferences’ on page 24).
Activate Scenea
Single-picture wallpaper
1
2
•• To verify whether visually impaired audio is
Adjust volume for visually impaired
Press
Use Scenea to display a
picture as TV wallpaper
Tip
available, press and select [Audio language].
Languages with an eye icon indicate visually
impaired support.
Press the green button to turn on audio
feedback or press the red button to turn
it off.
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Scenea], then press OK.
»» The default or pre-loaded picture is
displayed.
Wallpaper slide show
Make sure the wallpaper is not yet activated.
1
2
3
Connect a USB storage device to the TV.
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Scenea], then press OK.
»» All pictures in the USB storage device
are displayed.
Note
•• If the sleep time is off, the wallpaper is
displayed for 120 minutes. Otherwise, it is
displayed for the duration of the sleep timer.
Make sure your USB storage device contains a
picture of less than 1MB.
Note
•• The file size of the picture must not be more
than 1MB.
1
2
3
4
5
6
Connect the USB storage device to the
TV.
Press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Browse USB], then press OK.
»» The content browser appears.
Press the Navigation buttons to select a
picture.
Press
(Options).
Select [Set as Scenea] and press OK.
Update the TV software
Philips continuously tries to improve its
products and we recommend that you update
the TV software when updates are available.
Check www.philips.com/support for availability.
Check the current software version
1
2
3
4
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Update software] > [Advanced
software update], then press OK.
Select [Current software info].
»» The version of the current software is
displayed.
Downloaded From TV-Manual.com Manuals
Update software (from website)
Before performing this procedure be sure to:
• Set aside some time to complete the
entire update.
• Have available a USB storage device with
at least 256MB of storage space.
• Have access to a computer with a USB
port and internet access.
1
2
3
4
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Software update], then press OK.
Select [USB] and press OK.
»» The update assistant starts. Follow the
on-screen instructions to complete the
update.
Update software (digital broadcasts)
(Only available in some countries) If available,
your TV can receive software updates via
digital broadcasts.
If an update is available, a message appears
prompting you to update the software. We
strongly recommend that you update the
software when prompted.
Follow the instructions below to update the
software at a later stage.
1
2
3
4
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup] and press OK.
Select [Update software] > [Advanced
software update] and pressOK.
Select [Local updates] and press OK.
»» The TV searches for available software
updates via digital broadcasts.
EN
23
English
Upload a wallpaper picture from a
USB device
Update software (from internet)
For PFL8605 only
(Only available in some countries/cities) If
your TV is connected to a router, which is
connected to the Internet, you can update the
TV software directly from the Internet. You
need a high speed Internet connection.
1
2
3
4
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Change TV preferences
1
2
3
4
Select [Software update] and press OK.
Select [Internet] and press OK.
»» The update assistant starts. Follow the
on-screen instructions to complete the
update.
Tip
•• If the TV is connected to the Internet, the TV
displays a message about the availability of new
software at startup.
5
6
24 EN From TV-Manual.com Manuals
Downloaded
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings] and press
OK.
Select [Preferences], then select a setting
to change:
• [Menu language]: Selects the menu
language.
• [Sleeptimer]: Sets the TV to switch
to standby after a pre-defined period
of time.
• [Location]: Optimizes TV settings for
your location - home or shop.
• [Volume bar]: Displays the volume
bar when you adjust the volume.
• [Channel information size]: Displays
information about the TV channel
every time you switch channels.
• [Universal access]: Enables or
disables the universal access menu.
• [Key beep]: Enables or disables the
audio feedback when you press a
remote control button.
• [Programme guide]: Selects the
source/provider of the program
guide.
• [Audio Out delay]: Enable or disable
audio delay to match the video on
screen. Always connect the audio
signal from a DVD player or other
device directly to the TV first.
• [TV placement]: Applies TV settings
suitable for the placement of the TV.
• [Teletext 2.5]: Enables or disables
Teletext 2.5.
• [Clock]: Accesses TV clock settings.
Press OK to confirm.
»» The setting is applied.
Press
(Back) to exit the menu.
1
2
3
4
5
English
Start a TV demo
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Press to select [TV demonstrations],
then press OK.
»» The demo menu appears.
Press the Navigation buttons to select a
demo, then press OK.
Press
to exit.
Reset the TV to factory settings
Resetting your TV to factory settings restores
default picture and sound settings. Channel
installation settings remain the same.
1
2
3
4
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings] >
[Factory settings].
Press OK.
»» TV settings are reset back to the
factory default.
Re-install the TV
Re-installing your TV restores default picture and
sound settings, including channel installation settings.
1
2
3
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings] >
[Reinstall TV], then press OK.
»» TV settings are reset to the factory
default. All channel installed are removed.
Downloaded From TV-Manual.com Manuals
EN
25
6 Install channels
The first time you setup your TV, you are
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
re-install and fine tune channels.
Automatically install channels
This section describes how to search and store
channels automatically.
1
2
Press the Navigation buttons to select
[Setup], then press OK .
3 Select [Automatic channel search] >
[Advanced channel settings] and press
OK.
4 Select [Channel installation] >
[Analogue: Manual installation] >
[System] and press OK.
»» A list of regional systems appears.
5
Install channels
Your TV searches and stores all available TV
channels.
1
2
3
4
Press
(Home).
Press the Navigation buttons to select
[Setup] and press OK.
»» The setup menu appears.
Select [Automatic channel search] and
press OK.
»» Follow the onscreen instructions to
complete channel installation. When
channel installation is complete,
[Done] is selected and a list of installed
channels appears.
Press OK to confirm your choice.
»» The TV exits to the TV mode.
Manually install channels
This section describes how to search and store
analog TV channels manually.
Step 1 Select your system
Note
•• Skip this step if your system settings are correct.
26 EN From TV-Manual.com Manuals
Downloaded
When watching TV, press (Home).
»» The home menu appears.
Select the system for your country, city or
region and press OK.
»» The selected country, city or region is
applied.
Step 2 Search and store new TV
channels
1
In the [Analogue: Manual installation]
menu, press the Navigation buttons to
select [Find channel].
2 Press OK.
»» The [Find channel] menu appears.
3
Press:
• The Navigation buttons or Numeric
buttons to manually enter the
channel frequency.
• Select [Search] and press OK to
automatically search for the next
channel.
4 When the correct channel frequency is
selected, press the Navigation buttons to
select [Done].
5 Press OK.
»» The [Analogue: Manual installation]
menu appears.
6
Press the Navigation buttons to select:
• [Store current channel] to store
the new channel under the current
channel; or
• [Store as new channel] to store the
new channel under a new channel
number.
7 Press OK to confirm your choice.
»» The channel is stored.
You can fine tune analog channels manually
when reception is poor.
1
2
3
4
5
6
7
8
9
Press (Home).
»» The home menu appears.
Select [Automatic channel search] >
[Advanced channel settings], then press
OK.
Select [Channel installation] >
[Analogue: Manual installation] > [Fine
tune].
Press the Navigation buttons or Numeric
buttons to manually enter the channel
frequency.
When the correct channel frequency is
selected, select [Done] and press OK.
»» The [Analogue: Manual installation]
menu appears.
Press the Navigation buttons to select
[Store current channel] to store the new
channel under the current channel.
Reorder stored channels
Reorder channels in the TV channel list to your
desired location.
3
4
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
15
16 17 1 8 1 9 20
Press the Navigation buttons to select
[Setup], then press OK.
10Press OK to confirm your choice.
1
2
»» To cancel and exit, press (Options)
and follow the on-screen instructions.
When watching TV, select the channel to
fine tune.
Press OK.
»» The [Fine tune] menu appears.
When watching TV, press
(Browse).
Select [Channel list], then press OK.
»» The channel list appears.
Press the Navigation buttons to select
the channel to reorder.
Press (Options).
»» The options menu appears.
Downloaded From TV-Manual.com Manuals
Select [Reorder], then press OK.
»» A message appears. To continue, go to
step 5.
Ned 1
Ned 2
Ne 3
Ned
N
RTL 4
RTL 5
SBSS 6
RTL
TLL 7
RTL 8
RT
Net 5
Nickkelo
kelo
e
B C1
BB
BBC
BBCC 2
KetNeet
KetN
Discoover
Na onal
Nati
n
nal
Com
medyy
CN
NN
Eur
uro
rosspp
ro
A mal
Anim
ma
HBO
BO
6
Press the Navigation buttons to move the
channel to the desired location in the list.
7 Press OK to confirm.
»» The channel is moved to the desired
location.
8
Press
(Back) to exit the channel list.
Rename channels
Rename channels in the TV channel list.
1 When watching TV, press (Browse).
2 Select [Channel list], then press OK.
»» The channel list appears.
3
Press the Navigation buttons to select a
channel to rename.
4 Press (Options).
»» The options menu appears.
5
6
Select [Rename], then press OK.
»» An entry screen appears.
Press the Navigation buttons or Numeric
buttons to edit the name.
7 Once complete, select [Done].
• To clear the entry, select [Clear].
• To cancel, select [Cancel].
8
9
Press OK to confirm your choice.
Press
(Back) to exit the channel list.
EN
27
English
5
Fine tune analog channels
Hide and unhide channels
Set up your favorite channels
Hide channels
Add or remove channels from a
favorite list
Hide channels from the channel list, to prevent
unauthorised access.
1
2
3
4
5
When watching TV, press
(Browse).
Select [Channel list], then press OK.
»» The channel list appears.
1
2
3
Press (Options).
»» The options menu appears.
4
Select [Hide channel], then press OK.
»» The channel is hidden.
5
Repeat steps 3 and 4 to hide more
channels or press to return to watching
TV.
Unhide channels
Display hidden channels.
1
2
3
4
5
6
7
When watching TV, press
(Browse).
Select [Channel list], then press OK.
»» The channel list appears.
Press (Options).
»» The options menu appears.
Select [Show hidden channels], then
press OK.
»» The channel list appears and the
hidden channel is indicated in gray.
Select the hidden channel, then press .
Select [Unhide all], then press OK.
»» The hidden channels are now available.
Press
(Browse)
Select [Channel list], then press OK.
»» The channel list appears.
Press the Navigation buttons to select
the channel to add or remove.
Press (Options).
»» The options menu appears.
Select [Mark as favourite] or [Unmark as
favourite].
• A star indicates that the channel is
added to the favorite list.
• The star disappears if you remove
the channel from the favorite list.
Select a favorite list or view all
channels
View only channels in a favorite list, or view all
channels if a favorite list is currently selected.
1
2
3
4
5
to return to watching TV.
6
28 EN From TV-Manual.com Manuals
Downloaded
When watching TV, press
When watching TV, press
(Browse).
Select [Channel list], then press OK.
»» The channel list appears.
Press
(Options).
Select [Select list] and press OK.
»» The [Select list] menu appears.
Select:
• [All]Displays all channels.
• [Favourites]Displays channels in a
selected favorite list.
• [Radio]Displays radio channels only.
• [Digital]Displays digital channels only.
• [Analogue]Displays analog channels
only.
Press OK to confirm your choice.
Bottom connectors
English
7 Connect devices
This section describes how to connect devices
with different connectors. Examples are
provided in the Quick Start.
Note
•• You can use different types of connectors to
1
connect a device to your TV.
Connectors for PFL6605
Back connectors
2
3
4
1
2
3
CVI 2
Analog audio and video input from analog
or digital devices such as DVD players or
game consoles.
SERV. U
For use by service personnel only.
5
CVI 1
Analog audio and video input from analog
or digital devices such as DVD players or
game consoles.
DIGITAL AUDIO OUT
Digital audio output to home theaters
and other digital audio systems.
HDMI
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
VGA and AUDIO IN
Audio and video input from a computer.
ANTENNA
Signal input from an antenna, cable or
satellite.
Side connectors
AV IN
Analog audio and video input from analog
or digital devices such as DVD players,
satellite receivers and VCRs.
a USB
Data input from USB storage devices.
b HDMI
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
Downloaded From TV-Manual.com Manuals
EN
29
Connectors for PFL8605
3
Back connectors
4
5
1
2
3
4
5
NETWORK
Data input from a network.
HDMI
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
VGA and AUDIO IN
Audio and video input from a computer.
ANTENNA
Signal input from an antenna, cable or
satellite.
Side connectors
SERV. U
For use by service personnel only.
Stereo audio output to headphones or
earphones.
AV IN
Analog audio and video input from analog
or digital devices such as DVD players,
satellite receivers and VCRs.
CVI 2
Analog audio and video input from analog
or digital devices such as DVD players or
game consoles.
Bottom connectors
a USB
Data input from USB storage devices.
b HDMI
Digital audio and video input from highdefinition digital devices such as Blu-ray
players.
Connect a computer
1
2
CVI 1
Analog audio and video input from analog
or digital devices such as DVD players or
game consoles.
DIGITAL AUDIO OUT
Digital audio output to home theaters
and other digital audio systems.
30 EN From TV-Manual.com Manuals
Downloaded
Before you connect a computer to the TV:
• Set the screen refresh rate on your
computer to 60Hz.
• Select a supported screen resolution on
your computer (see ‘Supported display
resolutions’ on page 40).
• Enable [PC mode] in the [Picture]menu
(see ‘Manually adjust picture settings’ on
page 12), and set the picture format to
[Wide screen].
•
Note
HDMI cable and HDMI-DVI adaptor
(rear HDMI and AUDIO IN)
English
Connect a computer with one of the
following connectors:
AUDIO IN
DVI / VGA
•• Connections via DVI or VGA require an
additional audio cable.
•
HDMI cable
DVI
•
•
DVI-HDMI cable (rear HDMI and
AUDIO IN)
HDMI cable and HDMI-DVI adaptor
(side HDMI and AUDIO IN L/R)
AUDIO IN
DVI / VGA
DVI
•
DVI
•
DVI-HDMI cable (side HDMI and
AUDIO IN L/R)
VGA cable
AUDIO IN
DVI / VGA
VGA
DVI
VGA
Downloaded From TV-Manual.com Manuals
EN
31
Connect to a computer
network (For PFL8605)
Connect the TV to a computer network and
enjoy multimedia content streamed from
your computer. With the TV connected to a
computer network, you can view photos, play
music and watch video files streamed from your
computer.
Caution
Connect the TV to a computer
network
1
Connect the network cable between the
NETWORK connector at the back of the
TV, and a network router.
Be sure that the router is connected to
your computer via a wired or wireless
connection and that the router’s DHCP
setting is enabled.
NETWORK
•• Familiarize yourself with the network router,
media server software and networking
principles before attempting to connect the
TV to a computer network. If necessary,
read documentation accompanying network
components. Philips is not responsible for lost,
damaged or corrupt data.
What you need
•
•
•
•
A network router (with DHCP enabled)
A computer with media server software
installed. The computer must be
connected to the network router via a
wired or wireless network connection.
An ethernet cable to connect the router
to the TV. We recommend using a
shielded Cat5 ethernet cable which is
shorter than 3 meters.
You can also connect this TV to a PC
network wirelessly via an optional
wireless USB adaptor. Check with your
local retailer for purchase details.
Note
•• In case the apparatus does not recover in
DLNA mode due to electrostatic discharge,
user intervention is required.
•• A complete list of supported media server
software is available (see ‘Multimedia’ on page
40).
32 EN From TV-Manual.com Manuals
Downloaded
www
2
3
4
Switch on the router.
Switch on the computer.
Setup media server software to access
media from your computer (see ‘Setup
media server software’ on page 36).
Setup media server software
Media server software must be properly
configured to enable media sharing. Follow the
instructions that follow to setup your media
server software and to share media folders.
If you do not find instructions for your media
server software, refer to documentation
accompanying your software to enable media
sharing.
English
In Microsoft Windows Media Player
11
Note
•• The instructions are applicable to both
Microsoft Windows XP and Vista.
Enable media sharing
1
In Microsoft Windows, start Windows
Media Player 11.
»» Windows Media Player appears.
4
5
6
7
2
3
Click Library > Media Sharing.
»» The Media Sharing window appears.
Click Networking... .
»» Network and Sharing Center appears.
8
9
Click the arrow next to Network
discovery.
»» Network discovery options appear.
Click Turn on network discovery, then
click Apply.
Click the arrow next to File sharing.
»» File sharing options appear.
Click Turn on file sharing, then click
Apply.
Go back to the Media Sharing window.
In the Sharing settings box, click Share
my media to:.
10Click the Unknown Device icon (the TV),
then click Allow.
»» A green tick appears on the Unknown
Device icon, indicating that it is ready
for media sharing.
11 Click OK.
Downloaded From TV-Manual.com Manuals
EN
33
Add folders for media sharing
1 In Windows Media Player, click Library ->
Add to Library... .
»» The Add To Libary window appears.
2
4
5
6
Click Add.
»» The Add Folder window appears.
Select a folder to share and click OK.
When all folders are added, click OK in
the Add To Library window.
»» Folders are added to the library, and
are ready to be accessed from the TV.
Click My folders and those of others that
I can access.
In TVersity v0.9.10.3 (Microsoft Windows)
Enable media sharing
1
2
3
In Microsoft Windows, start TVersity.
»» TVersity appears.
Click the Settings tab.
»» The TVersity settings appear.
Click Advanced Options.
»» Advanced options appear in the Add
To Library window.
3
4
34 EN From TV-Manual.com Manuals
Downloaded
In the Media Sharing Service box, click
Start Sharing.
»» A window appears, informing you that
Media Sharing Service started.
Click OK.
1
In TVersity, click the Sharing tab.
»» The Sharing options appear.
In Twonky Media v4.4.2 (Macintosh
OS X)
Enable media sharing
1
2
3
2
3
Click the green plus icon
»» Options to add files and folders appear.
Click Add Folder.
»» An Add Media window appears.
In Mac OS X, start Twonky Media.
»» Twonky Media appears.
In the Basic Setup box, click Clients/
Security.
»» Clients/Security settings appear.
Click Enable sharing for new clients
automatically, then click Save Changes.
»» Media sharing is enabled.
Add folders for media sharing
1
2
3
4
5
English
Add folders for media sharing
In the Basic Setup box, click Sharing.
»» Sharing settings appear.
Click Browse to add a folder location.
Click Add new content directory to add
more folders.
When all folders are added, click Save
changes then click Rescan content
directories.
»» Media files are ready to be accessed
from the TV.
Click Browse and select folders to share.
When all folders are selected, click Submit.
»» Media files are ready to be accessed
from the TV.
Downloaded From TV-Manual.com Manuals
EN
35
Setup media server software
1
2
3
When the TV is connected to a
computer network with Internet access,
press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select ,then press OK.
»» Follow the on-screen instructions.
Use Philips EasyLink
Philips EasyLink provides several features
that enable you to control devices that are
connected via HDMI. Connected devices must
support the HDMI-CEC standard, and must
be properly configured for EasyLink to work.
Note
•• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
•• HDMI-CEC functionality is known by other
Use HDMI ARC
The HDMI 1 connector is HDMI Audio Return
Channel (ARC) compliant. Use it to output
digital audio to a HDMI home theater.
Enable or disable HDMI ARC
Note
•• Do not enable HDMI ARC unless you intend
to use it.
1
2
3
4
5
Press .
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink] > [HDMI 1 - ARC],
then press OK.
Select [On] or [Off], then press OK.
36 EN From TV-Manual.com Manuals
Downloaded
names on other brands. Some examples are
Anynet (Samsung), Aquos Link (Sharp) or
BRAVIA Sync (Sony). Not all brands are fully
compatible with Philips EasyLink.
EasyLink features
One-touch play
When you play content from a HDMI-CEC
compliant device, the TV switches on from
standby, and switches to the correct source.
One-touch standby
When you connect your TV to a HDMICEC compliant device, pressing on the
TV remote control switches the TV and all
connected HDMI devices to standby mode.
System audio control
When you connect your TV to, for example,
a HDMI-CEC compliant home theater system
(HTS), your TV speakers automatically mute
and audio from the TV plays through the HTS.
For more speaker settings (see ‘Configure TV
speakers’ on page 38).
EasyLink Remote Control
EasyLink Remote Control allows you to control
HDMI-CEC compliant devices using your TV
remote control (see ‘Enable or disable remote
control key forwarding’ on page 38).
Pixel Plus Link
Connected Philips EasyLink devices may apply
their own picture quality processing to a video,
before streaming it to the TV. This may interfere
with the image processing of the TV. Enable Pixel
Plus Link to discard picture quality processing
from connected Philips EasyLink devices (see
‘Enable or disable Pixel Plus link’ on page 39).
You can control EasyLink-compliant devices
with the following buttons on the remote
control of your TV.
Button
OK
EasyLink function
Starts, pauses or resumes
playback on your EasyLink
device.
Activates a selection or
accesses the menu of your
EasyLink device.
(Previous) Searches backward on your
EasyLink device.
(Next)
Searches forward on your
EasyLink device.
0-9
When EasyLink is enabled,
(Numeric
selects a title, chapter or track.
buttons)
Navigates through the menus
(Navigation of your EasyLink devices.
buttons)
(Options) Displays the menus of your
EasyLink device. Note that
when (Home) is pressed,
the TV menu is displayed.
(Standby- When EasyLink is enabled,
On)
switches the TV and all
EasyLink devices to standby.
Press and hold (Standby-On)
for at least 3 seconds.
Adjust EasyLink settings
1
2
3
4
5
Downloaded From TV-Manual.com Manuals
When watching TV, press (Home).
»» The home menu appears.
English
EasyLink buttons
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink], then select a setting to
adjust:
• [EasyLink]: Enables one-touch play
and one-touch standby between
EasyLink-compliant devices.
• [EasyLink Remote Control]: When
EasyLink is enabled, allows remote
control key forwarding.
• [TV speakers]: Turns TV speakers
on or off. Setting TV speakers
to automatic mode turns off the
speakers when content from an
EasyLink-compliant home theater
system is detected.
• [Pixel Plus link]: When EasyLink is
enabled, automatically applies the
best Pixel Plus setting if there is
more than one (for example, if both
your TV and DVD player support
Pixel Plus).
• [Auto subtitle shift]: Enables or
disables display of subtitles from
Philips EasyLink compliant Home
Theatre Systems over the video
image on your TV. The video image
is stretched across the whole of TV
display, without the need to create a
separate subtitle bar at the bottom
of the screen
• [HDMI 1 - ARC]: Enable or disable
HDMI ARC (only if a HDMI ARC
compliant device is connected to the
HDMI ARC connector on the TV).
Press OK to confirm your choice.
»» The EasyLink setting is applied.
EN
37
Enable or disable EasyLink
Note
•• Do not enable Philips EasyLink if you do not
intend to use it.
1
2
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink] > [EasyLink], then
press OK.
Select [On] or [Off] .
Press OK to confirm your choice.
»» EasyLink is enabled or disabled.
Configure TV speakers
You usually connect the TV to a HDMI-CEC
compliant device such as a HTS using both
a HDMI cable (for video) and a digital audio
cable (for audio). You can output TV audio
through the HDMI cable solely, provided both
the TV and device are HDMI-ARC compliant
(see ‘Use HDMI ARC’ on page 36).
1
2
3
4
5
Enable or disable remote control key
forwarding
Note
•• Enable EasyLink before enabling remote
control key forwarding.
1
2
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to
select[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink] > [EasyLink Remote
Control], then press OK.
Select [On] or [Off].
Press OK to confirm your choice
»» RC key forwarding is enabled or disabled
on the selected HDMI connector.
Note
•• If you cannot exit from a device’s menu, press
.
38 EN From TV-Manual.com Manuals
Downloaded
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink] > [TV speakers], then
press OK.
Select a setting, then press OK.
• [On]: Turns on TV speakers.
• [Off]: Turns off TV speakers.
• [EasyLink]: TV audio is streamed
through the TV speakers. Switch the
TV audio to the connected HDMICEC audio device through the
experience menu.
• [EasyLink autostart]: Turn off TV
speakers automatically and streams
TV audio to the connected HDMICEC audio device.
Select speakers in experience mode
If you have set your TV speakers to [EasyLink]
or [EasyLink autostart], access the experience
bar to switch the TV audio.
1
2
When watching TV, press
(Experience).
»» The experience bar appears.
Press the Navigation buttons to select
[Speakers], then press OK.
Select one of the following, then press
OK:
• [TV]: On by default. Streams TV
audio through TV speakers until the
connected HDMI-CEC audio device
switches to system audio control.
Thereafter, TV audio is streamed
through the connected device.
• [Amplifier]: Streams audio through
the connected HDMI-CEC device.
If system audio mode is not enabled
on the device, audio will continue
to stream from TV speakers if
[EasyLink] was selected. If [EasyLink
autostart] was enabled, the TV
prompts the connected device to
switch to system audio mode.
Enable or disable Pixel Plus link
Connected Philips EasyLink devices may apply
their own picture quality processing to a
video, before streaming it to the TV. This may
interfere with the image processing of the TV.
Enable Pixel Plus Link to discard picture quality
processing from connected Philips EasyLink
devices (see ‘Manually adjust picture settings’
on page 12).
1
2
3
4
5
Enable or disable auto subtitle shift
Auto subtitle shift displays subtitles from
Philips EasyLink compliant home theater over
the video image on your TV. The video image
is thus stretched across the whole of tour TV
display, without the need to create a separate
subtitle bar at the bottom of the screen.
1
2
3
4
5
6
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to
select[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink] > [Auto subtitle shift],
then press OK.
Select [On] or [Off].
Press OK to confirm.
Use a Kensington lock
There is a Kensington security slot at the back
of the TV. Prevent theft by looping a Kensington
lock between the slot and a permanent object,
such as a heavy table.
When watching TV, press (Home).
»» The home menu appears.
Press the Navigation buttons to select
[Setup], then press OK.
Select [Advanced TV settings], then
press OK.
Select [EasyLink] > [Pixel Plus link], then
press OK.
Select [On] or [Off], then press OK.
Downloaded From TV-Manual.com Manuals
EN
39
English
3
8 Product
information
Product information is subject to change
without notice. For detailed product
information, go to www.philips.com/support.
Supported display resolutions
Computer formats (HDMI)
• Resolution - refresh rate:
• 640 x 480 - 60Hz
• 800 x 600 - 60Hz
• 1024 x 768 - 60Hz
• 1360 x 768 - 60Hz
• 1280 x 1024 - 60 Hz
• 1600 x 1200 - 60Hz
• 1920 x 1080 - 60Hz
Computer formats (VGA)
• Resolution - refresh rate:
• 640 x 480 - 60Hz
• 800 x 600 - 60Hz
• 1024 x 768 - 60Hz
• 1360 x 768 - 60Hz
Video formats
• Resolution - refresh rate:
• 480i - 60Hz
• 480p - 60Hz
• 576i - 50Hz
• 576p - 50Hz
• 720p - 50Hz, 60Hz
• 1080i - 50Hz, 60Hz
• 1080p - 24Hz, 25Hz, 30Hz, 50Hz,
60Hz
40 EN From TV-Manual.com Manuals
Downloaded
Multimedia
•
Supported storage device: USB (FAT,
FAT32 or DOS-formatted; Mass Storage
Class compliant only)
Images: .jpg
Supported multimedia file formats:
•
•
Format
Video
AVI
MPEG-4 SP,
MPEG-4 ASP
mpeg
mpeg4
WMV
Audio
MPEG
Layer 2/3,
AC3
MPEG-1,
MPEG-1
MPEG-2
Layer 2,
LPCM,
AC3
MPEG-4 AVC AAC-LC,
(H.264, L2-CIF), AAC-HE
MPEG-4 AVC
(H.264, L4-HD)
WMV9/VC1
.wma
File
extension
.avi
.mpg,
.mpeg,
.vob
.mp4
.wmv
Note
•• Multimedia file names must not exceed 128
characters.
(For PFL8605 only)
• Supported media server software:
• Windows Media Player 11 (Microsoft
Windows XP or Vista)
• PacketVideo Twonky Media 4.4.9
(Microsoft Windows or Macintosh OS X)
• Sony Vaio media server (Microsoft
Windows XP or Vista)
• TVersity v.0.9.10.3 (Microsoft
Windows XP)
• Nero 8 - Nero MediaHome
(Microsoft Windows XP)
• DiXiM (Microsoft Windows XP)
• Macrovision Network Media Server
(Microsoft Windows XP)
• Fuppes (Linux)
• UShare (Linix)
• Philips Media Manager (Microsoft
Windows XP)
• Supported NAS:
• Philips NAS SPD8020
Dimensions
•
•
•
42PFL8605
• Without TV stand
• Dimension (WxHxD): 1011 x 618.2
x 41.5 (mm)
• Weight: 16.5 kg
• With TV stand
• Dimension (WxHxD): 1011 x 665.5
x 242 (mm)
• Weight: 19.5 kg
46PFL8605
• Without TV stand
• Dimension (WxHxD): 1103 x 669 x
42.4 (mm)
• Weight: 16.4 kg
• With TV stand
• Dimension (WxHxD): 1103 x 716 x
265 (mm)
• Weight: 20 kg
52PFL8605
• Without TV stand
• Dimension (WxHxD): 1243 x 748 x
42.4 (mm)
• Weight: 19.9 kg
• With TV stand
• Dimension (WxHxD): 1243 x 796 x
295 (mm)
• Weight:24.5 kg
40PFL6605
• Without TV stand
• Dimension (WxHxD): 977 x 605 x
86 (mm)
• Weight: 13.7 kg
• With TV stand
• Dimension (WxHxD): 977 x 649 x
236 (mm)
• Weight: 16.1 kg
46PFL6605
• Without TV stand
• Dimension (WxHxD): 1122 x 685 x
87 (mm)
• Weight: 17.9 kg
• With TV stand
• Dimension (WxHxD): 1122 x 731 x
268 (mm)
• Weight: 21.3 kg
Antenna input: 75ohm coaxial (IEC75)
TV system: DVB COFDM 2K/8K
Video playback: NTSC, SECAM, PAL
Remote control
•
•
Type: PF01C10B (For PFL6605),
PF02C10B (For PFL8605)
Batteries: 2 x AAA (LR03 type)
Power
•
•
•
Mains power: 220-240V~; 50-60Hz
Standby power: < 0.15W
Ambient temperature: 5 to 40 degrees
Celsius
Supported TV mounts
To mount the TV, purchase a Philips TV mount.
To prevent damage to cables and connectors,
be sure to leave a clearance of at least 2.2
inches or 5.5cm from the back of the TV.
Warning
•• Follow all instructions provided with the TV
mount. Koninklijke Philips Electronics N.V. bears
no responsibility for improper TV mounting that
results in accident, injury or damage.
TV screen size
Wall bracket type
Screw
size
40 inches/ 102
cm
42 inches/ 107
cm
46 inches/ 117
cm
52 inches/ 132
cm
200 x 200mm
M6
200 x 200 mm
M6
300 x 300 mm
M8
400 x 400 mm
M8
Downloaded From TV-Manual.com Manuals
EN
41
English
Tuner/Reception/Transmission
9 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.
General TV issues
The TV does not switch on:
•• Disconnect the power cable from the
power outlet. Wait for one minute then
reconnect it.
•• Check that the power cable is securely
connected.
•• Check that the power switch at the
bottom/back of the TV is switched on.
The TV does not respond to remote control
or side controls when switched on.
•• The TV requires some time to start up.
During this time, the TV will not respond
to the remote control or side controls.
This is normal behavior.
The remote control is not working properly:
•• Check that the remote control batteries
are correctly inserted according to the
+/- orientation.
•• Replace the remote control batteries if
they are flat or weak.
•• Clean the remote control and TV sensor
lens.
The standby light on the TV blinks red:
•• Disconnect the power cable from the
power outlet. Wait until the TV cools
down before reconnecting the power
cable. If the blinking reoccurs, contact
Philips Consumer Care.
You forgot the code to unlock the child lock
feature
•• Enter ‘8888’.
The TV menu is in the wrong language.
•• Change the TV menu to your preferred
language.
42 EN From TV-Manual.com Manuals
Downloaded
When turning the TV on/off/to standby, you
hear a creaking sound from the TV chassis:
•• No action is required. The creaking sound
is normal expansion and contraction of
the TV as it cools and warms up. This
does not impact performance.
When the TV is in standby mode, a startup
splash screen is displayed, then returns to
standby mode.
•• This is normal behavior. The startup
screen is displayed when the TV is
disconnected from the mains and
reconnected.
TV channel issues
Previously installed channels do not appear in
the channel list:
•• Check that the correct channel list is
selected.
No digital channels were found during the
installation:
•• Check that the TV supports DVB-C in
your country. See the listed countries/
cities on the back of the TV.
The TV is on, but there is no picture:
•• Check that the antenna is properly
connected to the TV.
•• Check that the correct device is selected
as the TV source.
There is sound but no picture:
•• Check that the picture settings are
correctly set.
There is poor TV reception from an antenna
connection:
•• Check that the antenna is properly
connected to the TV.
•• Loud speakers, unearthed audio devices,
neon lights, high buildings and other large
objects can influence reception quality.
If possible, try to improve the reception
quality by changing the antenna direction
or moving devices away from the TV.
•• If reception on only one channel is poor,
fine tune this channel.
There is poor picture quality from connected
devices:
•• Check that the devices are connected
properly.
•• Check that the picture settings are
correctly set.
The TV did not save your picture settings:
• Check that the TV location is set to the
home setting. This mode offers you the
flexibility to change and save settings.
The picture does not fit the screen; it is too
big or too small:
•• Try using a different picture format.
The picture position is incorrect:
•• Picture signals from some devices may
not fit the screen correctly. Check the
signal output of the device.
The picture from broadcasts is scrambled:
•• You may need to use a Conditional
Access Module to access content. Check
with your operator.
Downloaded From TV-Manual.com Manuals
An “e-sticker” banner displaying information
appears on the TV display:
The TV is in [Shop] mode. Remove the
e-sticker by setting the TV to [Home] mode.
In the [Home] menu, select [Setup] >
[Advanced TV settings] > [Preferences] >
[Location] menu. It is necessary to switch the
TV to standby to ensure that the TV exits
[Shop] mode completely.
Sound issues
There is picture but no sound from the TV:
Note
•• If no audio signal is detected, the TV
automatically switches the audio output off
— this does not indicate malfunction.
••
Check that all cables are properly
connected.
•• Check that the volume is not set to 0.
•• Check that the sound is not muted.
•• Check that the TV speakers setting is on
in the sound menu.
•• Check that the TV audio output is
connected to the audio input on the
HDMI CEC enabled/EasyLink-compliant
HTS device. Sound should be heard from
the HTS speakers.
There is picture but sound quality is poor:
•• Check that the sound settings are
correctly set.
There is picture but sound comes from one
speaker only:
•• Verify that sound balance is set to the center.
EN
43
English
Picture issues
HDMI connection issues
There are problems with HDMI devices:
•• Note that HDCP (High-bandwidth Digital
Content Protection) support can delay
the time taken for a TV to display content
from a HDMI device.
•• If the TV does not recognize the HDMI
device and no picture is displayed, try
switching the source from one device to
another and back again.
•• If there are intermittent sound
disruptions, check that output settings
from the HDMI device are correct.
•• If you use an HDMI-to-DVI adapter or
HDMI to DVI cable, check that an additional
audio cable is connected to AUDIO L/R or
AUDIO IN (mini-jack only).
You cannot use EasyLink features:
•• Check that your HDMI devices are
HDMI-CEC compatible. EasyLink features
only work with devices that are HDMICEC compatible.
If a HDMI CDC/EasyLink-compliant audio
device is connected to the TV and the TV does
not display any mute or volume icon when the
volume is muted, increased or decreased.
•• This behavior is normal when a HDMI
CEC/EasyLink-compliant device is
connected.
USB connection issues
USB device content is not displayed:
•• Check that the USB storage device is
set to ‘Mass Storage Class’ compliant,
as described in the storage device’s
documentation.
•• Check that the USB storage device is
compatible with the TV.
•• Check that the audio and picture file
formats are supported by the TV.
44 EN From TV-Manual.com Manuals
Downloaded
Audio and picture files do not play or display
smoothly
•• The transfer performance of the USB
storage device may limit the data transfer
rate to the TV, causing poor playback.
Computer connection issues
The computer display on the TV is not stable:
•• Check that your PC uses the supported
resolution and refresh rate.
•• Set the TV picture format to unscaled.
Contact us
If you cannot resolve your problem, refer to
the FAQs for this TV at www.philips.com/
support.
If the problem remains unresolved, contact
Philips Consumer Care in your country as
listed in this user manual.
Warning
•• Do not attempt to repair the TV yourself. This
may cause severe injury, irreparable damage to
your TV or void your warranty.
Note
•• Make a note of your TV model and serial
number before you contact Philips. These
numbers are printed on the back of the TV
and on the packaging.
A
age ratings
Ambilight
brightness
change settings
set active mode
switch on or off
antenna
Audio Return Channel, ARC
B
batteries
bracket for wall mount
C
care
channel list
channels
favorites
fine-tune
hide/unhide
install
automatic
manual
lock
rename
reorder/rearrange
troubleshooting
child lock
PIN code
clock
automatic
manual
computer
connect
display resolution
connect
antenna
devices
network
PC
connectors
overview
D
18
15
15
9
9
29
36
41, 4, 42
41
default settings
demo
devices
add to home menu
connect
remove
watch
digital channel
subtitles
digital radio
digital services
teletext
display
resolution
wallpaper
dispose
25
25
10, 8
29
11
8
18
21
9, 16
40
22
4
E
4
11, 28, 27
28, 28
27
28
26
26
18
27
27
42
42
19
19
EasyLink
enable
one-touch play
Pixel Plus link
system audio control
TV speakers
end of life
environmental care
e-sticker
F
factory settings
favorites list
add to list
view list
fine tune channels
H
30
40
HDMI
hearing impaired
home mode
29
29
32
44
I
29, 30
Downloaded From TV-Manual.com Manuals
38
38, 36
39, 36
36, 38
38
4
4
24
25
28
28
27
44, 30
21
24
install channels
automatic
manual
26
26
EN
45
English
10Index
K
Kensington lock
39
L
language
menu
subtitle
troubleshoot
list
channels
location
home or shop
lock
Kensington lock
lock channels
PIN code
R
42, 10
18
42
28
24
39
18
42
M
menu
language
main menu
teletext
troubleshooting
MHEG teletext
MPEG artifact reduction
multimedia
music
digital radio
USB
O
on timer
42, 10
10
16
42
9
12
40
21
20
17
P
PC
connect
resolution
picture format
change
troubleshooting
picture settings
picture shift
PIN code
Pixel Plus link
power
preferences
product specifications
44
40
13
43
11
14
42
39, 36
46 EN From TV-Manual.com Manuals
Downloaded
radio
reception
recycle
register product
reinstall TV
remote control
batteries
RC pass-through
technical specifications
troubleshooting
rename channels
reorder channels
resolution
restore default
S
safety
screen care
screen saver
settings
picture
sound
settings assistant
shop mode
smart settings
software
digital broadcast
version
website
sound settings
specifications
subpages in teletext
subtitles
enable/disable
language
switch
channels
on and off
41, 42
24
40
21
43
4
5
25
41, 4
38
41
42
27
27
40
25, 25
3
4
22
11, 12,
15, 14, 11
11
24
12, 14
23
23
23
14, 15
40
16
18
18
7
7
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
Document order number: 3139 125 41601
Downloaded From TV-Manual.com Manuals