DVD VIDEO PLAYER
DN-V210/DN-V310
USER GUIDE
MODE D’EMPLOI
GUÍA DEL USUARIO
IMPORTANT TO SAFETY
WARNING:
To reduce the risk of fire and electric shock,
this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as
vases, should not be placed on this apparatus
CAUTION
1.Handle the power supply cord carefully
Do not damage or deform the power supply cord.
If it is damaged or deformed, it may cause electric
shock or malfunction when used. When removing
from wall outlet, be sure to remove by holding the
plug attachment and not by pulling the cord.
2.Do not open the rear cover
In order to prevent electric shock, do not open the
top cover.
If problems occur, contact your DENON DEALER.
3.Do not place anything inside
Do not place metal objects or spill liquid inside the
system.
Electric shock or malfunction may result.
Please, record and retain the Model name and serial
number of your set shown on the rating label.
Model No. DN-V210/DN-V310
Serial No.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude
to constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
NOTE:
This DVD Video Player uses the semiconductor laser.
To allow you to enjoy music at a stable operation, it is
recommended to use this in a room of 5°C (41°F) ~
35°C (95°F).
LABELS (for U.S.A. model only)
CERTIFICATION
THIS PRODUCT COMPLIES WITH DHHS RULES
21 CFR SUBCHAPTER J APPLICABLE AT DATE OF
MANUFACTURE.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS OR
REFOR-MANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE EXCEPT
PROPERLY QUALIFIED SERVICE PERSONNEL.
FCC INFORMATION
(For US customers)
1. PRODUCT
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this product may not cause harmful interference,
and (2) this product must accept any interference
received, including interference that may cause
undesired operation.
2. IMPORTANT NOTICE:
DO NOT MODIFY THIS PRODUCT
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modification not expressly approved by
DENON may void your authority, granted by the FCC,
to use the product.
3. NOTE
This product has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
This product generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful
interference to radio or television reception, which can
be determined by turning the product OFF and ON, the
user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the product into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the local retailer authorized to distribute
this type of product or an experienced radio/TV
technician for help.
This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à
la norme NMB-003 du Canada.
i
SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Read Instructions – All the safety and operating instructions
should be read before the product is operated.
Retain Instructions – The safety and operating instructions
should be retained for future reference.
Heed Warnings – All warnings on the product and in the
operating instructions should be adhered to.
Follow Instructions – All operating and use instructions should
be followed.
Cleaning – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Attachments – Do not use attachments not recommended by
the product manufacturer as they may cause hazards.
Water and Moisture – Do not use this product near water – for
example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the
like.
Accessories – Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious
injury to a child or adult, and serious damage to the product. Use
only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer, or sold with the product. Any mounting
of the product should follow the manufacturer’s instructions,
and should use a mounting
accessory recommended by the
manufacturer.
A product and cart combination
should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the
product and cart combination to
overturn.
Ventilation – Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and
to protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
Power Sources – This product should be operated only from
the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.
Grounding or Polarization – This product may be equipped
with a polarized alternating-current line plug (a plug having one
blade wider than the other). This plug will fit into the power
outlet only one way. This is a safety feature. If you are unable
to insert the plug fully into the outlet, try reversing the plug. If
the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL
ELECTRICAL CODE
13.
15.
16.
17.
18.
19.
20.
21.
22.
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
23.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
ii
24.
25.
Power-Cord Protection – Power-supply cords should be routed
so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where
they exit from the product.
Outdoor Antenna Grounding – If an outside antenna or cable
system is connected to the product, be sure the antenna or
cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article
810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See Figure A.
Lightning – For added protection for this product during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line
surges.
Power Lines – An outside antenna system should not be
located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power
lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such
power lines or circuits as contact with them might be fatal.
Overloading – Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of
fire or electric shock.
Object and Liquid Entry – Never push objects of any kind into
this product through openings as they may touch dangerous
voltage points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the product.
Servicing – Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
Damage Requiring Service – Unplug this product from the
wall outlet and refer servicing to qualified service personnel
under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the
product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the
operating instructions. Adjust only those controls that
are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation,
e) If the product has been dropped or damaged in any way,
and
f) When the product exhibits a distinct change in performance
– this indicates a need for service.
Replacement Parts – When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
Safety Check – Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Wall or Ceiling Mounting – The product should be mounted to
a wall or ceiling only as recommended by the manufacturer.
Heat – The product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
CAUTION:
(English)
To completely disconnect this product from the mains,
disconnect the plug from the wall socket outlet.
The mains plug is used to completely interrupt the power
supply to the unit and must be within easy access by the
user.
Copyrights
2 It is prohibited by law to reproduce, broadcast, rent or
play discs in public without the consent of the
copyright holder.
Urheberrechte
VORSICHT:
(Deutsch)
Um dieses Gerät vollständig von der Stromversorgung
abzutrennen, trennen Sie bitte den Netzstecker von der
Wandsteckdose ab.
Die Hauptstecker werden verwendet, um die Stromversorgung
zum Gerät völlig zu unterbrechen; er muss für den Benutzer
gut und einfach zu erreichen sein.
PRECAUTION:
(Français)
Pour déconnecter complètement ce produit du courant
secteur, débranchez la prise de la prise murale.
La prise secteur est utilisée pour couper complètement
l’alimentation de l’appareil et l’utilisateur doit pouvoir y
accéder facilement.
ATTENZIONE:
(Italiano)
Per scollegare definitivamente questo prodotto dalla rete
di alimentazione elettrica, togliere la spina dalla relativa
presa.
La spina di rete viene utilizzata per interrompere
completamente l’alimentazione all’unità e deve essere
facilmente accessibile all’utente.
PRECAUCIÓN:
(Español)
Para desconectar completamente este producto de la
alimentación eléctrica, desconecte el enchufe del enchufe
de la pared.
El enchufe de la alimentación se utiliza para interrumpir
por completo el suministro de alimentación a la unidad y
debe de encontrarse en un lugar al que el usuario tenga
fácil acceso.
VOORZICHTIGHEID:
(Nederlands)
Om de voeding van dit product volledig te onderbreken
moet de stekker uit het stopcontact worden getrokken.
De netstekker wordt gebruikt om de stroomtoevoer naar
het toestel volledig te onderbreken en moet voor de
gebruiker gemakkelijk bereikbaar zijn.
FÖRSIKTIHETSMÅTT:
(English)
(Deutsch)
2 Die Reproduktion, Ausstrahlung, der Verleih sowie die
öffentliche Wiedergabe von Discs erfordern die
Zustimmung des Urheberrechtinhabers.
Droits d’auteur
(Français)
2 La reproduction, la diffusion, la location, le prêt ou la
lecture publique de ces disques sont interdits sans le
consentement du détenteur des droits d’auteur.
Copyright
(Italiano)
2 La duplicazione, la trasmissione, il noleggio e la
riproduzione dei dischi in pubblico senza l’autorizzazione
scritta del titolare dei diritti di copyright sono vietati dalla
legge.
Derechos de Autor
(Español)
2 De acuerdo con las leyes está prohibido reproducir,
emitir, alquilar o interpretar discos en público sin la
autorización del propietario de los derechos de autor.
Auteurstrechten
(Nederlands)
2 Het zonder toestemming van de auteursrechthebbenden
reproduceren, uitzenden, verhuren of in het openbaar
afspelen
van discs is wettelijk verboden.
Upphovsrätt
(Svenska)
2 Enligt lagen är det förbjudet att återge, utsända, hyra ut
eller spela skivor för allmän publik med mindre
tillstånd från ägaren till upphovsrätten först har
inhämtats.
(Svenska)
Koppla loss stickproppen från eluttaget för att helt skilja
produkten från nätet.
Stickproppen används för att helt bryta strömförsörjningen
till apparaten, och den måste vara lättillgänglig för
användaren.
iii
NOTE ON USE / HINWEISE ZUM GEBRAUCH /
OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO /
NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA
• Avoid high temperatures.
Allow for sufficient heat dispersion when
installed on a rack.
• Vermeiden Sie hohe Temperaturen.
Beachten Sie, daß eine ausreichend
Luftzirkulation gewährleistet wird, wenn das
Gerät auf ein Regal gestellt wird.
• Eviter des températures élevées
Tenir compte d’une dispersion de chaleur
suffisante lors de l’installation sur une étagère.
• Evitate di esporre l’unità a temperature alte.
Assicuratevi che ci sia un’adeguata
dispersione del calore quando installate l’unità
in un mobile per componenti audio.
• Evite altas temperaturas
Permite la suficiente dispersión del calor
cuando está instalado en la consola.
• Vermijd hoge temperaturen.
Zorg voor een degelijk hitteafvoer indien het
apparaat op een rek wordt geplaatst.
• Undvik höga temperaturer.
Se till att det finns möjlighet till god
värmeavledning vid montering i ett rack.
• Handle the power cord carefully.
Hold the plug when unplugging the cord.
• Gehen Sie vorsichtig mit dem Netzkabel um.
Halten Sie das Kabel am Stecker, wenn Sie
den Stecker herausziehen.
• Manipuler le cordon d’alimentation avec
précaution.
Tenir la prise lors du débranchement du
cordon.
• Manneggiate il filo di alimentazione con cura.
Agite per la spina quando scollegate il cavo
dalla presa.
• Maneje el cordón de energía con cuidado.
Sostenga el enchufe cuando desconecte el
cordón de energía.
• Hanteer het netsnoer voorzichtig.
Houd het snoer bij de stekker vast wanneer
deze moet worden aan- of losgekoppeld.
• Hantera nätkabeln varsamt.
Håll i kabeln när den kopplas från el-uttaget.
iv
• Keep the set free from moisture, water, and
dust.
• Halten Sie das Gerät von Feuchtigkeit, Wasser
und Staub fern.
• Protéger l’appareil contre l’humidité, l’eau et
lapoussière.
• Tenete l’unità lontana dall’umidità, dall’acqua e
dalla polvere.
• Mantenga el equipo libre de humedad, agua y
polvo.
• Laat geen vochtigheid, water of stof in het
apparaat binnendringen.
• Utsätt inte apparaten för fukt, vatten och
damm.
• Unplug the power cord when not using the
set for long periods of time.
• Wenn das Gerät eine längere Zeit nicht
verwendet werden soll, trennen Sie das
Netzkabel vom Netzstecker.
• Débrancher le cordon d’alimentation lorsque l’
appareil n’est pas utilisé pendant de longues
périodes.
• Disinnestate il filo di alimentazione quando
avete l’intenzione di non usare il filo di
alimentazione per un lungo periodo di tempo.
• Desconecte el cordón de energía cuando no
utilice el equipo por mucho tiempo.
• Neem altijd het netsnoer uit het stopkontakt
wanneer het apparaat gedurende een lange
periode niet wordt gebruikt.
• Koppla ur nätkabeln om apparaten inte
kommer att användas i lång tid.
* (For sets with ventilation holes)
• Do not obstruct the ventilation holes.
• Die Belüftungsöffnungen dürfen nicht
verdeckt werden.
• Ne pas obstruer les trous d’aération.
• Non coprite i fori di ventilazione.
• No obstruya los orificios de ventilación.
• De ventilatieopeningen mogen niet worden
beblokkeerd.
• Täpp inte till ventilationsöppningarna.
• Do not let foreign objects in the set.
• Keine fremden Gegenstände in das Gerät
kommen lassen.
• Ne pas laisser des objets étrangers dans l’
appareil.
• E’ importante che nessun oggetto è inserito
all’interno dell’unità.
• No deje objetos extraños dentro del equipo.
• Laat geen vreemde voorwerpen in dit apparaat
vallen.
• Se till att främmande föremål inte tränger in i
apparaten.
• Do not let insecticides, benzene, and thinner
come in contact with the set.
• Lassen Sie das Gerät nicht mit Insektiziden,
Benzin oder Verdünnungsmitteln in Berührung
kommen.
• Ne pas mettre en contact des insecticides, du
benzène et un diluant avec l’appareil.
• Assicuratevvi che l’unità non venga in contatto
con insetticidi, benzolo o solventi.
• No permita el contacto de insecticidas,
gasolina y diluyentes con el equipo.
• Laat geen insektenverdelgende middelen,
benzine of verfverdunner met dit apparaat in
kontakt komen.
• Se till att inte insektsmedel på spraybruk,
bensen och thinner kommer i kontakt med
apparatens hölje.
• Never disassemble or modify the set in any
way.
• Versuchen Sie niemals das Gerät auseinander
zu nehmen oder auf jegliche Art zu verändern.
• Ne jamais démonter ou modifier l’appareil d’
une manière ou d’une autre.
• Non smontate mai, nè modificate l’unità in
nessun modo.
• Nunca desarme o modifique el equipo de
ninguna manera.
• Nooit dit apparaat demonteren of op andere
wijze modifiëren.
• Ta inte isär apparaten och försök inte bygga
om den.
CAUTION
• The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths,
curtains, etc.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• Attention should be drawn to the environmental aspects of battery disposal.
• The apparatus shall not be exposed to dripping or splashing for use.
• No objects filled with liquids, such as vases, shall be placed on the apparatus.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product,
to which this declaration relates, is in conformity with the
following standards:
EN60065, EN55013, EN55020, EN61000-3-2 and
EN61000-3-3.
Following the provisions of 73/23/EEC, 2004/108/EC and
93/68/EEC Directive.
• ÜBEREINSTIMMUNGSERKLÄRUNG
Wir erklären unter unserer Verantwortung, daß dieses
Produkt, auf das sich diese Erklärung bezieht, den
folgenden Standards entspricht:
EN60065, EN55013, EN55020, EN61000-3-2 und
EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC,
2004/108/EC und 93/68/EEC.
• DECLARATION DE CONFORMITE
Nous déclarons sous notre seule responsabilité que l’
appareil, auquel se réfère cette déclaration, est conforme
aux standards suivants:
EN60065, EN55013, EN55020, EN61000-3-2 et
EN61000-3-3.
D’après les dispositions de la Directive 73/23/EEC,
2004/108/EC et 93/68/EEC.
• DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que
este producto al que hace referencia esta declaración, está
conforme con los siguientes estándares:
EN60065, EN55013, EN55020, EN61000-3-2 y
EN61000-3-3.
Siguiendo las provisiones de las Directivas 73/23/EEC,
2004/108/EC y 93/68/EEC.
• EENVORMIGHEIDSVERKLARING
Wij verklaren uitsluitend op onze verantwoordelijkheid dat
dit produkt, waarop deze verklaring betrekking heeft, in
overeenstemming is met de volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 en
EN61000-3-3.
Volgens de bepalingen van de Richtlijnen 73/23/EEC,
2004/108/EC en 93/68/EEC.
• ÖVERENSSTÄMMELSESINTYG
Härmed intygas helt på eget ansvar att denna produkt,
vilken detta intyg avser, uppfyller följande standarder:
EN60065, EN55013, EN55020, EN61000-3-2 och
EN61000-3-3.
Enligt stadgarna i direktiv 73/23/EEC, 2004/108/EC och
93/68/EEC.
• DICHIARAZIONE DI CONFORMITÀ
Dichiariamo con piena responsabilità che questo prodotto,
al quale la nostra dichiarazione si riferisce, è conforme alle
seguenti normative:
EN60065, EN55013, EN55020, EN61000-3-2 e
EN61000-3-3.
In conformità con le condizioni delle direttive 73/23/EEC,
2004/108/EC e 93/68/EEC.
QUESTO PRODOTTO E’ CONFORME
AL D.M. 28/08/95 N. 548
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
,,
CLASS 1
,,
LASER PRODUCT
ATTENZIONE: QUESTO APPARECCHIO E’
DOTATO DI DISPOSITIVO OTTICO CON RAGGIO
LASER.
L’USO IMPROPRIO DELL’APPARECCHIO
PUO’ CAUSARE PERICOLOSE ESPOSIZIONI A
RADIAZIONI!
ADVARSEL: USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS! LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE
LASERSÄTEILYLLE.
VARNING–
OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I
DENNA BRUKSANVISNING SPECIFICERATS, KAN
ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG
LASERSTRÅLNING SOM ÖVERSKRIDER GRÄNSEN
FÖR LASERKLASS 1.
CAUTION:
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE.
THIS PRODUCT SHOULD NOT BE
ADJUSTED OR REPAIRED BY ANYONE
EXCEPT PROPERLY QUALIFIED SERVICE
PERSONNEL.
v
A NOTE ABOUT RECYCLING:
(English)
This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the
local recycling regulations.
When discarding the unit, comply with local rules or regulations.
Batteries should never be thrown away or incinerated but disposed of in accordance with the local
regulations concerning chemical waste.
This product and the accessories packed together constitute the applicable product according to the WEEE
directive except batteries.
HINWEIS ZUM RECYCLING:
(Deutsch)
Das Verpackungsmaterial dieses Produktes ist zum Recyceln geeignet und kann wiederverwendet werden. Bitte entsorgen
Sie alle Materialien entsprechend der örtlichen Recycling-Vorschriften.
Beachten Sie bei der Entsorgung des Gerätes die örtlichen Vorschriften und Bestimmungen.
Die Batterien dürfen nicht in den Hausmüll geworfen oder verbrannt werden; bitte geben Sie die Batterien
gemäß den örtlichen Bestimmungen an den Sammelstellen oder Sondermüllplätzen ab.
Dieses Produkt zusammen mit den Zubehörteilen ist das geltende Produkt der WEEE-Direktive, davon
ausgenommen sind die Batterien.
REMARQUE CONCERNANT LE RECYCLAGE :
(Français)
Le matériel d’emballage de cet appareil est recyclable et réutilisable. Veuillez disposer de tout matériau conformément à la
réglementation de recyclage en vigueur dans votre pays.
Lorsque vous mettez cet appareil au rebut, respectez les lois ou réglementations locales.
Les piles ne doivent jamais être jetées à la poubelle ou incinérées, mais mises au rebut conformément aux
réglementations locales concernant les déchets chimiques.
Ce produit et les accessoires emballés ensemble sont des produits conformes à la directive DEEE sauf
pour les piles.
NOTA RELATIVA AL RICICLAGGIO :
(Italiano)
I materiali di imballaggio di questo prodotto sono riutilizzabili e riciclabili. Smaltire i materiali conformemente alle normative
nazionali sul riciclaggio.
Per smaltire l’unità, osservare la normativa in vigore nel luogo di utilizzo.
Non gettare le pile, né bruciarle, ma smaltirle conformemente alla normativa locale sui rifiuti chimici.
Il prodotto e gli accessori inclusi nell’imballaggio rientrano nella direttiva WEEE, ad eccezione delle pile.
ACERCA DEL RECICLAJE:
(Español)
Los materiales de embalaje de este producto son reciclables y se pueden volver a utilizar. Elimine estos materiales de acuerdo
con la normativa de reciclaje local.
Cuando se deshaga de la unidad, cumpla con la reglamentación y la normativa locales.
No tire ni arroje las pilas al fuego. Elimínelas siguiendo la normativa local relacionada con los desperdicios
químicos.
Este producto y los accesorios que lo acompañan constituyen el producto aplicable de la directiva RAEE a
excepción de las pilas.
EEN OPMERKING OVER RECYCLING:
(Nederlands)
Het verpakkingsmateriaal van dit product is recyclebaar en kan opnieuw worden gebruikt. Gelieve het materiaal weg te
gooien in overeenstemming met wettelijke recyclingvoorschriften.
Als u het apparaat weggooit, houdt u dan aan de plaatselijke wetten en regels.
Batterijen mogen nooit worden weggegooid of verbrand, maar moeten worden weggegooid in
overeenstemming met de lokale wetgeving betreffende chemisch afval.
Dit product en de bijgeleverde accessoires vertegenwoordigen het toepasbare product volgens de WEEErichtlijn behalve de batterijen.
ANGÅENDE ÅTERVINNING:
Produktens emballage är återvinningsbart. Kassera det enligt lokala återvinningsbestämmelser.
Kassera enheten i överensstämmelse med lokala regler och föreskrifter.
Batterier får aldrig kastas i soporna eller brännas, utan ska kasseras enligt lokala bestämmelser för kemiskt
avfall.
Denna produkt och de medföljande tillbehören förutom batterierna, uppfyller gällande WEEE-direktiv.
vi
(Svenska)
z
x
c
v
b
n
m
,
.
⁄0
⁄1
⁄2
FEATURES ............................................................. 2
DISCS .................................................................... 3
CAUTIONS ON HANDLING DISCS ....................... 5
CONNECTIONS ..................................................... 6
PART NAMES AND FUNCTIONS ........................ 14
REMOTE CONTROL UNIT .................................. 16
LOADING DISCS ................................................. 19
CHANGING THE DEFAULT SETTINGS ................ 20
PLAYBACK .......................................................... 38
PLAYING REPEATEDLY ....................................... 42
PLAYING TRACKS IN THE DESIRED ORDER ..... 45
PLAYING TRACKS IN THE RANDOM ORDER .... 49
ENGLISH
— TABLE OF CONTENTS —
⁄3 USING THE ON-SCREEN DISPLAY ..................... 50
⁄4 USING THE MULTIPLE AUDIO, SUBTITLE AND
ANGLE FUNCTIONS ............................................... 51
⁄5 USING THE MENUS ............................................ 54
⁄6 PLAYING IN THE ZOOM MODE ......................... 56
⁄7 MP3/WMA FILE PLAYBACK ............................... 57
⁄8 PLAYING STILL PICTURE FILES (JPEG format) .... 59
⁄9 DivX FILE PLAYBACK .......................................... 62
¤0 ADVANCED FUNCTION ...................................... 66
¤1 TROUBLESHOOTING ......................................... 74
¤2 MAIN SPECIFICATIONS ...................................... 75
1
ACCESSORIES
ENGLISH
Please check to make sure the following items are included with the main unit in the carton:
q Audio cord ......................................................................1
w Video cord ......................................................................1
e Video cord (COMPONENT) ............................................1
r Remote control unit (RC-963) ........................................1
t R03/AAA batteries .........................................................2
y Power supply cord .........................................................1
u User guide......................................................................1
i Service station list ..........................................................1
o Rackmount kit ................................................................1
w
q
D
r
VD
PO
W
ER
O
PE
N
/C
LO
1
SE
2
4
t
y
3
5
7
6
8
0
BT
/
OG
PR RECT
DI
SU
9
+10
ITLE
C
AU
C
LE
L
AR
IO
AL
D
OM
ND
RA
AT
PE
RE
A-B
TOP
/PB MENU
C
e
PE
RE
AT
R
C
63
-9
ANG
LE
Y
LA
SP
DI
EN
TE
R
ME
NU
ST
O
P
SL
O
/S
E
US
PA
L/
IL
ST
W
EA
R
RET
TU
H
SE
C
URN
P
PL
N
/P
SK
C
AY
TS
IP
AL
OM
ZO
E
ID
SL
OW
SH
z FEATURES
1. High precision 96 kHz 24-bit D/A converter
The DN-V210/DN-V310 is equipped with a 24-bit D/A
converter for faithful D/A conversion of the high quality
24-bit data. This further enhances such aspects of
audio performance as the S/N ratio, dynamic range and
distortion and makes full use of the possibilities for high
quality sound provided by a high number of bits and high
sampling rates.
2. Progressive Scan function
The DN-V210/DN-V310 is equipped with a progressive
scan function achieving playback with high picture quality.
Movies and other DVD software can be recreated with a
picture quality near that of the original.
3. Advanced function
(1) KEY LOCK
Operation of the buttons on the front panel (aside from
the POWER button) is disabled to prevent accidental
operation.
(2) IR REMOTE LOCK
Operation of the buttons on the remote controller is
disabled to prevent accidental operation.
(3) HIDE OSD
Switch the OSD and the display of the icons that
appear on the screen on and off.
(4) AUTO PLAY
By this function the player can start playback
automatically after power on.
2
4. Serial remote control (DN-V310 only)
Commands can be sent to the DVD player and the status
requested and sent to the host via RS-232C.
5. Change the image on the DVD Player wallpaper
The image on the DVD player wallpaper can be changed
at the user‘s discretion.
• The types of discs listed on the table below can be used
on the DN-V210/DN-V310.
The marks are indicated on the disc labels or jackets.
Usable
discs
Recorded
signals
Mark (logo)
DVD video
DVD audio
(NOTE 1)
12 cm
Digital audio
+
Digital video
(MPEG2)
R
DVD-R
DVD-RW
(NOTE 2)
Disc
size
R
8 cm
R W
ENGLISH
x DISCS
NOTE 3: According to recording quality, some CD-R/RW
cannot be played.
NOTE 4: “Windows Media™”, “Windows®” are a trademarks
of Microsoft Corporation, Inc.
■ Disc terminology
• Titles and chapters (DVD-videos)
DVD-videos are divided into several large sections called
“titles” and smaller sections called “chapters”.
Numbers are allotted to these sections. These numbers
are called “title numbers” and “chapter numbers”.
For example:
R W
Title 1
Digital audio
+
Digital video
(MPEG1)
Video CD
CD
CD-R
CD-RW
(NOTE 3)
DTS-CD
Picture CD
Recordable
ReWritable
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
8 cm
Digital audio 12 cm
MP3
Digital picture
8 cm
(JPEG)
Digital picture
12 cm
(JPEG)
WMA
Digital audio
DivX®
Digital audio
+
Digital video
(MPEG4)
12 cm
Digital audio
12 cm
WMA
Windows
Media
Audio
Title 2
12 cm
• Tracks (video and music CDs)
Video and music CDs are divided into sections called
“tracks”.
Numbers are allotted to these sections. These numbers
are called “track numbers”.
12 cm
For example:
Track 1
■ The following types of discs cannot be played on the
DN-V210/DN-V310:
• For USA model:
DVDs with region numbers other than “1” or “ALL”
• For Europe model:
DVDs with region numbers other than “2” or “ALL”
• DVD-ROM/RAMs (For DVD-ROM discs, data files in
DivX® 3.11, 4.12 and 5.1 format can be played)
• SACD (only CD layered can be played)
• CD-ROMs (Data files in MP3, JPEG, WMA, and DivX®
3.11, 4.12 and 5.1 can be played)
• CDVs (Only the audio part can be played.)
• Photo CDs
Track 2
Track 3
Track 4
Track 5
• Playback control (PBC) (video CDs)
Video CDs including the words “playback control” on
the disc or jacket are equipped with a function for
displaying menus on the TV screen for selecting the
desired position, displaying information, etc., in dialog
fashion.
In this manual, playing video CDs using such menus is
referred to “menu playback”.
Video CDs with playback control can be used on the DNV210/DN-V310.
NOTE 1: Video part which based on DVD-video specification
only can be played.
NOTE 2: Playing DVD-R and DVD-RW discs
DVD-R and DVD-RW discs recorded in video
format on a DVD recorder can be played on the
DN-V210/DN-V310.
Discs that have not be finalized cannot be played.
Depending on the disc’s recording status, the
disc may not be accepted or may not be played
normally (the picture or sound may be not be
smooth, etc.).
3
ENGLISH
■ Patent information
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license under U.S. Patent #:5,451,942
& other U.S. and worldwide patents issued & pending.
DTS and DTS Digital Out are registered trademarks and
the DTS logos and Symbol are trademarks of DTS, Inc. ©
1996-2007 DTS, Inc. All Rights Reserved.
DivX, DivX Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
“HDMI”, the“HDMI” logo and “High Definition Multimedia
Interface” are trademarks or registerd trademark of HDMI
Licensing LLC.
NOTE:
• This DVD player is designed and manufactured to
respond to the Region Management Information that
is recorded on a DVD disc.
If the Region number described on the DVD disc does
not correspond to the Region number of this DVD
player, this DVD player cannot play this disc.
For USA model:
The Region number for this DVD player is
1.
1
For Europe model:
The Region number for this DVD player is
2.
2
CAUTIONS ON INSTALLATION
For heat dispersal, leave at least 0.2 m/8 inch of space
between the top, back and sides of this unit and the wall or
other components.
• Do not obstruct the ventilation holes.
0.2m (8ins.)
0.2m
(8ins.)
0.2m
(8ins.)
0.2m
(8ins.)
Wall
4
Discs
ENGLISH
c CAUTIONS ON HANDLING DISCS
Cautions on Handling Discs
Only the discs including the marks shown on page 5 can be
played on the DN-V210/DN-V310.
Note, however, that discs with special shapes (heart-shaped
discs, hexagonal discs, etc.) cannot be played on the DNV210/DN-V310. Do not attempt to play such discs, as they
may damage the player.
• Do not get fingerprints, grease or dirt on discs.
• Be especially careful not to scratch discs when removing
them from their cases.
• Do not bend discs.
• Do not heat discs.
• Do not enlarge the center hole.
• Do not write on the labeled (printed) side with a ball-point
pen or a pencil.
• Water droplets may form on the surface if the disc is
moved suddenly from a cold place to a warm one. Do not
use a hairdryer, etc., to dry the disc.
Cautions on Storing Discs
Holding Discs
Avoid touching the surface of discs when loading and
unloading them.
Be careful not to get fingerprints
on the signal surface (the side
which shines in rainbow colors).
Cautions on Loading Discs
Cleaning Discs
■ Fingerprints or dirt on the disc may lower sound and
picture quality or cause breaks in playback. Wipe off
fingerprints or dirt.
■ Use a commercially available disc cleaning set or a soft
cloth to wipe off fingerprints or dirt.
Wipe gently from the
middle outwards.
• Always eject discs after playing them.
• Keep discs in their cases to protect them from dust,
scratches and warping.
• Do not put discs in the following places:
1. Places exposed to direct sunlight for long periods of
time
2. Humid or dusty places
3. Places exposed to heat from heaters, etc.
Do not wipe with a circular
motion.
• Only load one disc at a time. Loading one disc on top of
another may result in damage or scratch the discs.
• Load 8 cm discs securely in the disc guide, without using
an adapter. If the disc is not properly loaded, it may slip out
of the guide and block the disc tray.
• Be careful not to let your fingers get caught when the disc
tray is closing.
• Do not place anything but discs in the disc tray.
• Do not load cracked or warped discs or discs that have
been fixed with adhesive, etc.
• Do not use discs on which the adhesive part of cellophane
tape or glue used to attach the label is exposed, or discs
with traces of tape or labels that have been peeled off.
Such discs may get stuck inside the player, resulting in
damage.
NOTE:
• Do not use record spray or antistatic. Also do not use
volatile chemicals such as benzene or thinner.
Record Thinner
spray
Benzene
5
ENGLISH
v CONNECTIONS
NOTES:
• Read the manuals of all the components when making connections.
• Keep the power cord unplugged until all connections have been completed.
• If the power is on when connections are made, noise may be generated and damage the speakers.
• Be sure to connect the left and right channels properly, L (left) to L, R (right) to R.
• Plug the power cord securely into the power outlet. Incomplete connection may result in noise.
• Binding the power cord together with connection cords may result in humming or noise.
(1) Connecting a TV
• Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DN-V210/
DN-V310’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT.
S-Video output connector
The video signals are divided
into color (C) and brightness
(Y) signals, achieving a clearer
picture.
If the TV is equipped with an
S-Video input connector, we
recommend connecting it to
the DN-V210/DN-V310’s SVideo output connector using a
commercially available S-Video
connection cord.
DN-V210/DN-V310
VIDEO IN
AUDIO IN
S-VIDEO IN
L
R
TV
To power outlet
NOTES:
• Connect the DN-V210/DN-V310’s video outputs to the TV either directly or through an AV amplifier. Do not connect it via
a VCR (video cassette recorder). Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy
prohibit system may cause disturbance in the picture.
• Set the “TV TYPE” in “VIDEO SETUP” in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL.
(See page 24.)
• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 24.)
• No audio signals are output from the DN-V210/DN-V310’s “AUDIO OUT” connector when discs recorded in DTS are
played.
6
ENGLISH
(2) Connecting to a TV or Monitor Equipped with Color Component Input Connectors
Color component output connectors (PR/CR, PB/CB and Y)
The red (PR/CR), blue (PB/CB) and brightness (Y) signals are output independently, achieving more
faithful reproduction of the colors.
• The color component input connectors may be marked differently on some TVs or monitors (PR,
PB and Y/R-Y, B-Y and Y/CR, CB and Y, etc.). For details, refer to the TV’s operating instructions.
• If your TV is compatible with progressive scan, press the “SHIFT” and “HDMI RES.” button on the
front panel so that “P.SCAN” lights on the display. This results in a high quality picture with little
flickering.
DN-V210/DN-V310
AUDIO IN
L
Y
PB/CB PR/CR
COMPONENT VIDEO IN
R
TV
NOTES:
• Use the three commercially available video cords to connect the DN-V210/DN-V310’s color component output
connectors to the TV or monitor.
• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL. (See page 24.)
• Set the “480p/576p” in “HDMI RES.” in “VIDEO SETUP” in “SETUP” to comply with Progressive TV.
• Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 24)
• No audio signals are output from the DN-V210/DN-V310’s “AUDIO OUT” connector when discs recorded in DTS are
played.
• When VIDEO OUT in the VIDEO SETUP menu is set to “RGB,” component video is not output. (Europe model only)
7
ENGLISH
(3) Connecting to a TV with 21-pin SCART Terminal (For only Europe model)
• Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the DN-V210/DN-V310’s 21-pin
SCART terminal (AV1).
• Select “RGB” for the video output setting at the setup screen video setup.
• CVBS and RGB signal are output from the SCART terminal (AV1).
When “RGB” is selected, no video signals are output from the component output.
When “RGB” is selected, CVBS and RGB are output.
21-pin SCART terminal
TV
DN-V210/DN-V310
To power outlet
NOTES:
• Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause
disturbance in the picture.
• Set the “TV TYPE“ in “VIDEO SETUP“ in “SETUP“ to comply with your TV’s video format. When the TV is NTSC
formatted, set to NTSC. When the TV is PAL formatted, set to PAL. (See page 24.)
8
ENGLISH
(4) Connecting to a AV amplifier with a Built-in decoder
When DVDs recorded in Dolby Digital or DTS are played, Dolby Digital or DTS bitstream signals are output from the DVD
player’s digital audio output connectors. If a Dolby Digital or DTS decoder is connected, you can achieve sound with the
power and sense of presence of a movie theater or concert hall.
To power outlet
DN-V210/DN-V310
Optical fiber cable
Center speaker
Front speaker (left)
Front speaker (right)
Digital audio input
connector (OPTICAL)
Subwoofer
AV amplifier with a built-in decoder
(AV control center)
Surround speaker (left)
Surround speaker (right)
NOTE:
• Harsh noise that could harm your ears or damage the speakers is generated when a DVD recorded in DTS is played
while using a decoder, etc., that is not DTS-compatible.
■ Connecting an optical fiber cable to the digital audio input connector (OPTICAL)
Line up in proper direction
Remove the dust cap, line up the cable in the proper directly, then insert it securely as far as it goes.
9
ENGLISH
■ Sound output from the DN-V210/DN-V310’s digital audio output connectors
In the case of bit stream output
Settings
DIGITAL OUTPUT
Audio recording format
NORMAL
PCM
Dolby Digital
Dolby Digital bitstream
2 channels PCM
(48 kHz / 16 bit)
DTS
DTS bitstream
—
MPEG Audio
2 channels PCM
(48 kHz / 16 bit)
2 channels PCM
(48 kHz / 16 bit)
DVD video
In the case of PCM output
Settings
96 k LPCM OUT
96 kHz
Audio recording format
DVD video
Linear
PCM
96 k > 48 k
Copy protection ON
Copy protection OFF
48 kHz / 16 ~ 24 bit
No output data (*1)
48 kHz / 16 ~ 24 bit PCM
48 kHz / 16 bit PCM
96 kHz / 16 ~ 24 bit
No output data (*2)
96 kHz / 16 ~ 24 bit PCM
48 kHz / 16 bit PCM
Video CD
MPEG 1
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
Music CD
44.1 kHz / 16 bit Linear PCM
44.1 kHz / 16 bit PCM
44.1 kHz / 16 bit PCM
MP3 CD
MP 3 (MPEG-1 Audio Layer 3)
32 ~ 48 kHz / 16 bit PCM
32 ~ 48 kHz / 16 bit PCM
*1 Only 48 kHz/16 bit sources are output.
*2 When playing copyright-protected linear PCM DVDs, in consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources, either set to “96k>48k” or make analog connections.
• Linear PCM audio is a signal recording format used for music CDs.
While signals are recorded at 44.1 kHz/16 bit for music CDs, for DVDs they are recorded at 48 kHz/16 bit to 96kHz/24 bit,
providing higher sound quality than music CDs.
• When you want to listen to output in DTS, set DIGITAL OUTPUT to NORMAL (bit stream). (See page 26.)
10
(5) Connecting to a Digital Recorder (MD Recorder, DAT Deck, etc.)
ENGLISH
✽ Set the “AUDIO SETUP” default setting as shown below. (See page 26.)
• “DIGITAL OUTPUT” → “PCM”
“96k LPCM OUT” → “96k>48k”
Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.
To power outlet
DN-V210/DN-V310
B
8
9
Digital audio input
connector (OPTICAL)
Optical fiber cable
(6) Connecting to a Stereo Component
To power outlet
DN-V210/DN-V310
Stereo component
Analog audio input
connector
NOTES:
• When connecting to a stereo device with 2 audio channels
q For sources recorded in multiple channels, analog signals downmixed into two channels are output. (For sources for
which downmixing is prohibited, only the FL and FR channels are output.)
w Set “96kLPCM OUT” at “AUDIO SETUP” under “SETUP” to “96k>48k” (See page 26). (When set to “96k>48k”,
analog audio signals converted to 48 kHz or less are output for linear PCM sources.)
11
ENGLISH
(7) Connecting to a HDMI device
HDMI Terminal
This unit has one HDMI output. It can send digital video and analog signals from DVDs. It minimizes signal degradation caused
by analog conversion so that high quality images can be enjoyed.
Select an HDMI output mode from the SETUP MENU. (See page 23.)
NOTES:
• When the HDMI output is connected to a display monitor that does not support HDCP, signals are not output. To view
images in HDMI, it is necessary to connect to a display that supports HDCP.
• There may be no image output if connected to a TV or display that is not compatible with the above format.
• Refer to the instruction manual of the TV or display to be connected to the DN-V210/DN-V310 for detailed information
regarding the HDMI terminal.
* HDCP: High-bandwidth Digital Content Protection
CONNECTING HDMI DEVICES
An HDMI cable (sold separately) is used to connect the HDMI output on the DN-V210/DN-V310 with the HDMI Terminal on a
DVD player, TV, projector or other component. To transmit multichannel audio via HDMI, the connected player must support
multichannel audio transmission through its HDMI output.
HDMI video streaming is compatible with DVI in principle. Therefore, it is possible to connect to a TV or monitor that has a DVI
terminal using an HDMI-DVI conversion cable or plug. When connecting to a DVI terminal, connect the audio signal separately.
Note that HDCP may not work with some DVI components.
HDMI SPECIFICATIONS
The HDMI output supports the High-Definition Multimedia Interface specification Information version 1.0.
The video resolutions are as follows.
• 480 p : 720 × 480
• 720 p : 1280 × 720
• 1080 i : 1920 × 1080
If the connected HDTV on projector doesn’t support a resolution, HDMI output resolution may not work.
The audio formats are as follows.
• PCM (41.1 kHz, 48 kHz, 96 kHz)
• Dolby Digital
• DTS
If your TV only supports HDMI digital audio up to 48 kHz, change the Linear PCM out setting to down sample on. (See page
27.)
If your TV doesn’t support Dolby Digital, set the digital out setting to PCM. (See page 26.)
If your TV doesn’t support DTS, the DN-V210/DN-V310 will not be able to play DTS format audio sound tracks. In this case, on
your DVD-video discs audio set up menu, select an audio format other than DTS.
12
ENGLISH
NOTES:
• When connected to a monitor (i.e., TV, projector, etc.) that does not support HDCP, video and audio are not output.
• Disconnecting or connecting cables with the power on can damage the equipment. Turn the power off before
disconnecting or connecting cables.
• Depending on the quiality of the cable used, the HDMI signal may be affected by noise.
HDMI
OUT
HDMI cable
Signal flow
HDMI
IN
HDTV,
projector
or
DN-A7100 or AV receiver
HDMI
IN
HDMI
OUT
HDMI
IN
HDTV,
projector
13
ENGLISH
b PART NAMES AND FUNCTIONS
(1) Front Panel
!6 !5 !4 !3 !2
!7
q
w
q POWER button
• Press once to turn the power on.
• Press again to set to the “OFF” position and turn the
power off.
• Set the power to the standby mode by pressing the
POWER button on the remote control unit while the
power is on.
• Turn the power on from the standby mode by pressing
the POWER button on the remote control unit.
w Disc tray
• Load discs here. (See page 19.)
• Press the OPEN/CLOSE button to open and close the
disc tray.
• The disc tray is also closed when the PLAY button is
pressed.
e PLAY/KEY LOCK button (3)
• Press this button to play the disc (See page 38.)
• Used in combination with the SHIFT button to turn the
KEY LOCK mode on and off. (See page 66.)
r STILL/PAUSE/IR REMOTE LOCK button (8)
• Press this button to pause images or music or to play
images frame by frame. (See page 41.)
• Used in combination with the SHIFT button to turn the
IR REMOTE LOCK mode on and off.(See page 66.)
t STOP/HIDE OSD button (7)
• Press this to stop the disc. (See page 40.)
• Used in combination with the SHIFT button to turn the
HIDE OSD mode on and off.(See page 67.)
y SHIFT button
• Used in combination with other buttons to perform
advanced functions. (See pages 24, 66, 67, 68.)
e
r t
!1 !0 o
yu
i
u SKIP/REPEAT button (4)
• Press this to move back to the beginning of the
current track (or chapter).
• Press again to move back to the beginning of the
previous track (or chapter). (See page 41.)
• Used in combination with the SHIFT button to switch
the repeat mode.(See page 42.)
i SKIP/HDMI RES. button (¢)
• Press this to move ahead to the beginning of the next
track (or chapter). (See page 41.)
• Used in combination with the SHIFT button to switch
the HDMI Resolution. (See page 24.)
o KEY LOCK indicator
• Lights when the KEY LOCK mode is on.
!0 IR REMOTE LOCK indicator
• Lights when the IR REMOTE LOCK mode is on.
!1 HIDE OSD indicator
• Lights when the HIDE OSD mode is on.
!2 Display
• Information on the disc that is currently playing is
shown on the display. (See page 15.)
!3 STANDBY indicator
• This lights when the power is in the standby mode.
!4 HDMI indicator
• Lights when HDMI output is selected as AUTO, 480p,
720p, or 1080i.
However, it only lights when AUTO is selected if the
HDMI signal is output to TV.
!5 Remote control sensor
!6 OPEN/CLOSE button (0)
• Press this button to open and close the disc tray.(See
page 19.)
!7 Power indicator
• This indicator lights when the power is on.
14
@7 @6
!8
!9
@0
ENGLISH
(2) Rear Panel
@5
@1
@2 @3
!8 Audio output connectors (AUDIO OUT)
• Connect using the included audio cord.
!9 SERIAL REMOTE terminal (DN-V310 only)
• This is the terminal for serial control from an external
device.
@0 Digital audio output connector (OPTICAL)
• Connect using an optical fiber cable (available in
stores).
• Digital data is output from this connector.
@1 21-pin SCART terminal (AV1)
(Europe model only)
• Connect using a 21-pin SCART cable (available in
stores).
@2 S-Video output connector (S-VIDEO OUT)
• Connect using an S-Video connection cord (available in
stores).
@4
@3 Component video output connectors
(COMPONENT VIDEO OUT)
• Connect using the included video cords.
@4 Power input (AC IN)
• Connect to AC power supply using the included power
supply cord.
• The shape of AC INLET changes depending on the
region of use. The figure above shows the Europe
view. The USA view is a poled-type INLET.
@5 Video output connector (VIDEO OUT)
• Connect using the included video cord.
@6 HDMI output connector
• Connect using an HDMI cable (available in stores).
• HDMI output mode can be selected from the SETUP
MENU or front keys. (See pages 23, 24.)
@7 Digital audio output connector (COAXIAL)
• Connect using an digital audio cord. Connect a
commercially available 75 Ω/ohms pin-plug cord.
• Digital data is output from this connector.
(3) Display
Lights to indicate the currently playing disc.
These light to indicate the names of the sections of the disc being played.
Lights in the random play mode.
Lights in the programmed
play mode.
Lights when progressive video signals are being
output of component out terminals.
Displays the title, track number and elapsed time
during playback.
Lights in the repeat play mode.
Lights in the still/pause mode.
Lights during playback, flashes when the resume play memory function is activated.
15
ENGLISH
n REMOTE CONTROL UNIT
■ The DN-V210/DN-V310 can be controlled from a distance using the included remote control unit (RC-963).
(1) Inserting Batteries
q Remove the remote control unit’s rear cover.
Cautions On Batteries
• Use R03/AAA batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with new
w Place two R03/AAA batteries in the battery compartment
in the direction indicated by the marks.
ones, even if less than a year has passed.
• The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the < and > marks in
the remote control unit’s battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
e Close the rear cover.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
(2) Using the Remote Control Unit
Approx. 7 meters
30°
D
DV
EN
OP
3
LE
ANG
U
MEN
DIS
ER
ENT
Y
PLA
P
CH
SET
URN
RET
EAR
W/S
SLO
STO
E
UP
P
AL
SKI
C/P
SHOW
Y
NTS
PLA
SLIDE
LL
AR
CA
CLE
T
-96
RC
U
MEN
C
TOP /PB
STILL
/PAUS
ZOOM
REPEA
E
OM
A-B
OS
/CL
DIO
AU
RAND
AT
R
PROG
DIREC
T /
REPE
WE
PO
SUBTIT
LE
30°
• When operating the remote control unit, point it at the
remote control sensor as shown on the diagram.
• The remote control unit can be used from a direct
distance of approximately 7 meters. This distance will
be shorter, however, if there are obstacles in the way or
if the remote control unit is not pointed directly at the
remote control sensor.
• The remote control unit can be operated at a horizontal
angle of up to 30° with respect to the remote control
sensor.
NOTES:
• It may be difficult to operate the remote control unit if the remote control sensor is exposed to direct sunlight or strong
artificial light.
• Do not press buttons on the main unit and on the remote control unit at the same time. Doing so will result in
malfunction.
16
ENGLISH
(3) Names and Functions of Remote Control Unit Buttons
■ Button not explained here function in the same way as the corresponding buttons on the main unit.
q DVD POWER button
Press this to switch the power between on and standby.
w Number buttons
Use these to input numbers.
Use the +10 button to input numbers of 10 or over.
Example: To input 25
+10
+10
q
DVD POWER
!3
OPEN/CLOSE
5
e SUBTITLE button
Press this to switch the DVD’s subtitle language.
r AUDIO button
For DVDs, press this to switch the audio language. For video
CDs, press this to switch the channel between “Left”, “Right”,
“Mix” and “STEREO”.
t TOP MENU/PBC button
The top menu stored on the disc is displayed.
For video CDs, press this to switch the PBC function between
“ON” and “OFF”.
w
e
r
1
2
3
4
5
6
7
8
9
0
+10
SUBTITLE
AUDIO
PROG /
DIRECT
CALL
CLEAR
RANDOM
REPEAT
A-B REPEAT
!8
!9
RC-963
y Cursor buttons/ENTER button
Use the 5 and ∞ buttons to select in the vertical direction.
Use the 2 and 3 buttons to select in the horizontal direction.
Press the ENTER button to select the item selected with the
cursor buttons.
u ANGLE button
Press this to switch the angle.
i DISPLAY button
Press this to display the ON-SCREEN.
o STOP button (7)
!0 SLOW/SEARCH buttons
!1 SETUP button
t
y
u
i
o
!0
!1
!2
!4
!5
!6
!7
TOP MENU
/PBC
MENU
@0
RETURN
@1
@2
@3
ENTER
ANGLE
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
@4
@5
@6
Press this to display the default setting screen.
!2 NTSC/PAL button
Use this to switch the set’s video output format (NTSC/PAL/MULTI).
!3 OPEN/CLOSE button
!4 PROGRAM/DIRECT button (PROG/DIRECT)
For DVDs and Video CDs, press this to switch between the
normal play, programmed play.
!5 CALL button
Does not function on this model.
17
ENGLISH
!6 RANDOM button
Press this to play the tracks on the video or music CD in random
order.
!7 CLEAR button
Press this to clear numbers that you have input.
!8 A-B REPEAT button (A-B)
Use this to repeat sections between two specific points.
!9 REPEAT button
Press this to play tracks repeatedly.
@0 MENU button
The DVD menu stored on the disc is displayed.
@1 RETURN button
Press this to return to the no on screen display.
Press this to return from the menu screen to the previous screen
when playing Video CDs in PBC playback.
@2 PLAY button (3)
@3 STILL/PAUSE button (8)
@4 SKIP buttons
@5 SLIDE SHOW button
The way of switching to the next image during continuous JPEG
image playback (SLIDE SHOW) can be selected.
@6 ZOOM button
Press this to enlarge the image.
18
■ Set discs in the disc tray with the labeled (printed) side
facing up.
• Pick up the disc carefully so as not to touch the signal
surface and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8 cm
discs in the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is automatically
loaded.
• The disc tray can also be closed automatically to load the
disc by pressing the PLAY button.
12 cm disc guide
Disc tray
(2) Loading Discs
8 cm disc guide
Figure 1
NOTE:
• Do not move the DN-V210/DN-V310 while a disc is
playing. Doing so may scratch the disc.
Outer disc tray
(1) Opening and Closing the Disc Tray
12 cm disc
q Turn on the power.
w Press the OPEN/CLOSE button.
POWER button
Figure 2
Inner disc tray
OPEN/CLOSE button
Disc tray
8 cm disc
NOTES:
• Be sure to turn on the power before opening and
closing the disc tray.
• Do not strike on the button with a pencil, etc.
NOTES:
• If your foreign object is caught in the disc tray during
closing, simply press the OPEN/CLOSE button again
and the tray will open.
• Do not press the disc tray in by hand when the power
is off. Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so
will damage it.
19
ENGLISH
m LOADING DISCS
ENGLISH
, CHANGING THE DEFAULT SETTINGS
■ Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
RC-963
TOP MENU
/PBC
MENU
3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
1
1
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
2
Turn on the power.
• Press the power button, the power indicator lights and the power
turns on.
Main unit
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE:
• For some menus, the initial values can be changed during playback.
VIDEO SETUP
Use this to set the DN-V210/DN-V310’s screen mode.
(HDMI RES., TV aspect, TV type, Brightness, Sharpness and Video
output (Europe model only).)
2
AUDIO SETUP
Use this to set the DN-V210/DN-V310’s audio output mode.
(Digital and LPCM output settings.)
DISC SETUP
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the discs default
language is set.
SYSTEM SETUP
On-screen display language setting: The initial settings screen’s
language setting, etc., the viewing restriction level and playback of
adult DVDs you do not want children, etc., to see can be restricted.
The number of initial setting items can be increased.
DivX SETUP
You can check the initial DivX language setting and DivX video on
demand.
3
Use the 2 and 3 cursor buttons to select the desired setting item.
Select “VIDEO SETUP”. (See page 22.)
Select “AUDIO SETUP”. (See page 26.)
Select “DISC SETUP”. (See page 28.)
Select “SYSTEM SETUP”. (See page 33.)
Select “DivX SETUP”. (See page 36.)
✽ To exit the setup mode
Press the SETUP button.
20
Remote control unit
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
VIDEO OUT
BASIC
COMPONENT
VIDEO MODE
FULL
SET: ENTER BUTTON
SELECT:
SET HDMI RES.
# : This item is displayed for Europe model
only.
: This item is displayed for EXPERT mode.
(See page 35.)
Remote control unit
ENGLISH
Setup items for use
Bold characters indicate factory defaults.
The mark of is indicated when SETUP MENU MODE is set up by an EXPERT.
DISC SETUP
VIDEO SETUP
HDMI RES.
AUTO
OFF
480P
720P
1080i
TV ASPECT
4:3 PS
4:3 LB
WIDE (16:9)
TV TYPE
NTSC (USA model)
MULTI (Europe model)
PAL
BRIGHTNESS
+7
+6
+5
+4
+3
+2
+1
BASIC
–1
–2
–3
–4
–5
–6
–7
SHARPNESS
+7
+6
+5
+4
+3
+2
+1
BASIC
–1
–2
–3
–4
–5
–6
–7
VIDEO OUT
(Europe model only)
RGB
COMPONENT
VIDEO MODE
FULL
ORIGINAL
AUTO FIT
PAN SCAN
DIALOG
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OTHERS
SUBTITLE
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OTHERS
OFF
DISC MENUS
ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
OTHERS
AUTO PLAY
ON
OFF
HD JPEG MODE
ON
OFF
SLIDE SHOW
5 SEC
10 SEC
15 SEC
ANGLE MARK
ON
OFF
CAPTIONS
OFF
ON
SYSTEM SETUP
OSD LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
DEUTSCH
WALL PAPER
BLACK
PICTURE
RATING LEVEL
8
NO LIMIT
1
2
3
4
5
6
7
PASSWORD
CHANGE
OLD PASSWORD
NEW PASSWORD
CONFIRM PASSWORD
DEFAULTS
RESET
PASSWORD
SETUP MENU MODE
BASIC
EXPERT
PARENTAL CONTROL
ON
OFF
AUDIO SETUP
DIGITAL OUTPUT
NORMAL
PCM
OFF
96k LPCM OUT
96k
96k>48k
DYNAMIC RANGE
MAX
MID
MIN
PASSWORD
DivX SETUP
DivX SUBTITLE
DivX REGISTRATION
UNICODE
W. EUROPEAN
TURKISH
C.EUROPEAN
CYRILLIC
GREEK
HEBREW
ARABIC
BALTIC
VIETNAM
21
ENGLISH
When “VIDEO SETUP” is selected
TOP MENU
/PBC
MENU
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
1
1
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
Set the “VIDEO SETUP” in SETUP mode. (See page 20.)
Use the 5 and ∞ cursor buttons to select the desired setting.
HDMI RES.
Use this to select whether HDMI output is ON/OFF, and the resolution.
Interlace or Progressive can be selected for Component output.
TV ASPECT
Use this to set the shape of your TV’s screen.
Remote control unit
TV TYPE
Use this to set your TV’s video format (NTSC, PAL or MULTI).
BRIGHTNESS
Use this to adjust the screen brightness.
2
SHARPNESS
Use this to adjust the screen sharpness.
VIDEO OUT (Europe model only)
Set the connector from which interlaced signals are to be output
(RGB or COMPONENT).
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
VIDEO MODE
The play DVD video, select the desired video mode (AUTO FIT, FULL,
ORIGINAL, PAN SCAN).
NOTES:
• The video mode is displayed when the “SETUP MENU MODE” at
“SYSTEM SETUP” is set to “EXPERT”.
22
NTSC
BRIGHTNESS
BASIC
SHARPNESS
BASIC
VIDEO OUT
VIDEO MODE
SELECT:
COMPONENT
FULL
SET: ENTER BUTTON
SET HDMI RES.
# : VIDEO OUT is Europe model only.
ENGLISH
Press the ENTER button to decide the menu item.
q When “HDMI RES.” (HDMI Resolution) is selected:
Use the 5 and ∞ cursor buttons to select the HDMI out, press the
ENTER button to decide.
• AUTO : When HDTV and HDMI are connected, some TVs may
automatically decide the appropriate HDMI RES.
• OFF : HDMI is turned OFF. When this is set, Component Video
output switches to Interlace.
• 480p/576p
: HDMI switches ON, and the output resolution is
480p/576p. When this is set, Component Video output
switches to Progressive.
P.SCAN lights on the display.
• 720p : HDMI switches ON, and the output resolution is 720p.
No output signals are output from Video out, S-Video out,
or Component out.
• 1080i : HDMI switches ON, and the output resolution is 1080i.
No output signals are output from Video out, S-Video out,
or Component out.
ENTER
Remote control unit
Remote control unit
q
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
VIDEO OUT
VIDEO MODE
SELECT:
BASIC
COMPONENT
FULL
SET: ENTER BUTTON
SET HDMI RES.
The relationships between the HDMI RES. settings, the output signals
from each of the video output connectors, and the display in each of
the conditions are shown below.
HDMI RES. setting
Video Output Connector
3
AUTO
OFF
480p
720p
1080i
VIDEO
480i/–
480i
480i
—
—
S-VIDEO
480i/–
480i
480i
—
—
COMPONENT
480i/–
480i
480p
—
—
RGB (SCART)
(Europe model only)
480i/–
480i
480i
—
—
HDMI
480p
720p
1080i
—
480p
720p
1080i
HDMI LED
–/Lights
—
Lights
Lights
Lights
P.SCAN
(Display for Component)
—
—
Lights
—
—
Display
• AUTO is output when the HDMI connector is connected to a HDTV
and the TV power is ON. The TV automatically selects one of
480p/576p/720p/1080i. If 720p or 1080i is selected, no video signals
are output from any of the video connectors other than HDMI.
Occasionally the TV may not automatically select the appropriate
output or other trouble.
If this occurs select a different setting to AUTO.
• When set to OFF, the COMPONENT output switches to interlaced
output.
• When set to 480p/576p, the COMPONENT output switches to
progressive output.
• 480i/480p is for NTSC. 576i/576p is for PAL.
CONSUMERS SHOULD NOTE
THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED
IN THE PICTURE. IN CASE OF
525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED
THAT THE USER SWITCH
THE CONNECTION TO THE
“STANDARD DEFINITION”
OUTPUT.
23
ENGLISH
Switching HDMI RES. on the main unit:
Press and hold the SHIFT and ¢ buttons for 3 seconds.
The current status is shown in the display for 2 seconds.
Continue holding down the SHIFT button and press the HDMI RES.
button to switch the status.
The status display is shown for 2 seconds in the display.
• When RGB (SCART) is selected, switching is not possible. RGB
appears on the display if you press the button. (See page 25.)
(Europe model only)
Main unit
Main unit display
AUTO
OFF
480p / 576p
720p
1080i
3
w When “TV ASPECT” is selected:
Use the 5 and ∞ cursor buttons to select the aspect, press the
ENTER button to decide.
4:3 PS (Factory default)
Select this to play wide DVDs in the pan & scan mode (with the
sides of the picture cut off). Discs for which pan & scan is not
specified are played in the letter box mode.
4:3 LB
Select this to play wide DVDs in the letter box mode (with black
strips at the top and bottom).
WIDE (16:9)
Select this to play wide DVDs in the full-screen mode.
e When “TV TYPE” is selected:
Use the 5 and ∞ cursor buttons to select the TV type, press the
ENTER button to decide.
NTSC (Factory default : USA model)
Select this when your TV’s video format is NTSC.
If NTSC is selected, output format is fixed to NTSC.
MULTI (Factory default : Europe model)
Select this when your TV is compatible with both the NTSC and
PAL formats.
If you play the disc recorded NTSC format, signal from video
output terminal will be switched to NTSC is selected, output
format is fixed to NTSC.
PAL
Select this when your TV’s video format is PAL.
If PAL is selected, output format is fixed to PAL.
24
ENTER
Remote control unit
Remote control unit
w
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
BASIC
VIDEO OUT
VIDEO MODE
SELECT:
COMPONENT
FULL
SET: ENTER BUTTON
SET TV ASPECT
e
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
VIDEO OUT
VIDEO MODE
SELECT:
SET TV TYPE
BASIC
COMPONENT
FULL
SET: ENTER BUTTON
t When “SHARPNESS” is selected:
Use the 5 and ∞ cursor buttons to select the level, press the
ENTER button to decide.
The factory default setting is BASIC. The screen sharpness can be
adjusted in steps from +7 to –7. The sharpness settings will differ
depending on the model of your TV. Set to suit your TV.
3
y When “VIDEO OUT” is selected: (Europe model only)
Use the 5 and ∞ cursor buttons to select the video out, press the
ENTER button several times and select the video out.
RGB
Video signals are output from the SCART (AV-1) terminal by RGB.
COMPONENT (Factory default)
Video signals are output from the color component output
connectors.
u When “VIDEO MODE” is selected:
Use the 5 and ∞ cursor buttons to select the video mode, press
the ENTER button to decide.
FULL
The video is displayed with the size adjusted to full screen.
ORIGINAL
The video is displayed in its original size.
AUTO FIT (Factory default)
The video is displayed with the size automatically adjusted so
there is no distortion. A black band may appear at the right and left
sides or the at top and bottom.
PANSCAN
Select when you connect a 4:3 television to this device. A section
of the video on one or both sides of the screen is cut.
r
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
BASIC
VIDEO OUT
VIDEO MODE
SELECT:
COMPONENT
FULL
SET: ENTER BUTTON
SET BRIGHTNESS
t
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
VIDEO OUT
VIDEO MODE
SELECT:
BASIC
COMPONENT
FULL
SET: ENTER BUTTON
SET SHARPNESS
y
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
BASIC
VIDEO OUT
VIDEO MODE
SELECT:
COMPONENT
FULL
SET: ENTER BUTTON
SET VIDEO OUT
u
VIDEO SETUP
HDMI RES.
AUTO
TV ASPECT
4:3 PS
TV TYPE
NTSC
BRIGHTNESS
BASIC
SHARPNESS
BASIC
VIDEO OUT
VIDEO MODE
NOTE:
• If stripes of noise appear on the picture or the picture is unclear
when playing a specific DVD video disc, try changing the video
mode.
ENGLISH
r When “BRIGHTNESS” is selected:
Use the 5 and ∞ cursor buttons to select the level, press the
ENTER button to decide.
The factory default setting is BASIC. The screen brightness can be
adjusted in steps from +7 to –7. The brightness settings will differ
depending on the model of your TV. Set to suit your TV.
SELECT:
COMPONENT
FULL
SET: ENTER BUTTON
SET VIDEO MODE
✽ To exit the setup mode
Press the SETUP button.
25
ENGLISH
When “AUDIO SETUP” is selected
TOP MENU
/PBC
MENU
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
1
Set the “AUDIO SETUP” in SETUP mode. (See page 20.)
Use the 5 and ∞ cursor buttons to select the desired setting.
DIGITAL OUTPUT
Use this to select the digital output’s signal format.
96k LPCM OUT
Use this to set the digital audio output when playing DVDs recorded in
linear PCM audio.
2
Remote control unit
DYNAMIC RANGE
This has the effect of reducing the size difference between audio
outputs. Even if the audio output is set to MIN, you can still hear audio
or conversations.
AUDIO SETUP
DIGITAL OUTPUT
PCM
96K LPCM OUT
DYNAMIC RANGE
NOTE:
• Dynamic range is displayed when the “SETUP MENU MODE” at
“SYSTEM SETUP” is set to “EXPERT”.
SELECT:
96k
MAX
SET: ENTER BUTTON
SET DIGITAL OUT
3
26
Press the ENTER button to decide the menu item.
q When “DIGITAL OUTPUT” is selected:
Use the 5 and ∞ cursor buttons to select the output format, press
the ENTER button to decide.
NORMAL
When playing DVDs recorded in Dolby Digital or DTS, bitstream
signals are output from the digital audio output terminals. When
playing DVDs recorded in linear PCM, linear PCM signals are
output.
Select “NORMAL” when making digital connections to an AV
amplifier with built-in Dolby Digital and DTS decoder.
PCM (Factory default)
When playing Dolby Digital bitstream signals or DVDs recorded in
linear PCM, the signals are converted into 48 kHz/16-bit PCM (2channel) signals and output from the digital outputs. When playing
DVDs recorded in PCM, linear PCM signals are output.
OFF
Digital audio is not output.
ENTER
Remote control unit
Remote control unit
q
AUDIO SETUP
DIGITAL OUTPUT
PCM
96K LPCM OUT
DYNAMIC RANGE
SELECT:
SET DIGITAL OUT
96k
MAX
SET: ENTER BUTTON
3
e When “DYNAMIC RANGE” is selected:
Use the 5 and ∞ cursor buttons to select the “ON” or “OFF”,
press the ENTER button to decide.
MAX (Factory default)
Dynamic range control is not operating. You can hear the original
audio.
MID
Dynamic range control operates at the mid-level. The size
difference between sounds becomes a little smaller.
MIN
Dynamic range control operates at the maximum level. The size
difference between sounds is reduced to the smallest level.
ENGLISH
w When “96k LPCM OUT” is selected:
Use the 5 and ∞ cursor buttons to select the conversion mode,
press the ENTER button to decide.
96k (Factory default)
When playing linear PCM DVDs that are not copyright-protected,
for 2-channel PCM audio signals up to 96 kHz, linear PCM signals
are output as such without being converted from the digital
outputs.
PCM signals of 48 kHz/16 bits and lower are output, regardless of
whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the digital signals
are down-mixed for output into two channels, front left and right.
(Only the front left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM DVDs, in
consideration of copyrights, no digital signals are output for
sources exceeding 48 kHz/16 bits. When playing such sources,
either set to “96k>48k” or make analog connections. (See page
10.)
96k>48k
Linear PCM and packed PCM signals are converted to 44.1 kHz
or 48 kHz and output. (The PCM digital audio output signals are
converted to 48 kHz or less in consideration of copyrights.) When
making digital connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to “96k>48k”.
When playing DVDs recorded in linear PCM or packed PCM
and the unit is set to output digital and analog audio signals
simultaneously, the analog audio output signals are also converted
to 48 kHz or below, so we recommend setting to “96k” and also
making analog connections.
ENTER
Remote control unit
Remote control unit
w
AUDIO SETUP
DIGITAL OUTPUT
PCM
96K LPCM OUT
DYNAMIC RANGE
SELECT:
96k
MAX
SET: ENTER BUTTON
SET 96k LPCM OUT
e
AUDIO SETUP
DIGITAL OUTPUT
PCM
96K LPCM OUT
DYNAMIC RANGE
SELECT:
96k
MAX
SET: ENTER BUTTON
SET DYNAMIC RANGE
✽ To exit the setup mode
Press the SETUP button.
27
ENGLISH
When “DISC SETUP” is selected
TOP MENU
/PBC
MENU
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
1
1
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
Set the “DISC SETUP” in SETUP mode. (See page 20.)
Use the 5 and ∞ cursor buttons to select the desired setting.
DIALOG
Use this to set the language of the sound output from the speakers.
SUBTITLE
Use this to set the language of the subtitles displayed on the TV.
DISC MENUS
Use this to set the language of the menus recorded on the disc (top
menu, etc.).
AUTO PLAY
It is possible to start playback automatically after the power is turned
on.
2
SLIDE SHOW
The time interval for switching to the next still picture when playing
slide shows of still pictures (in JPEG format) can be set.
ANGLE MARK
Angle marks are displayed/not displayed on the screen.
CAPTIONS
Use this to set whether or not to display the closed captions recorded
on DVDs.
NOTE:
• Angle marks and captions are displayed when “SET UP MENU
MODE” at “SYSTEM SETUP” is set to “EXPERT”.
28
Remote control unit
HD JPEG MODE
Use this to change the resolution of JPEG images.
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
ON
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
SET DIALOG
ON
OFF
SET: ENTER BUTTON
3
w When “ SUBTITLE” is selected:
Use the 5 and ∞ cursor buttons to select the language, press the
ENTER button to decide.
ENGLISH (Factory default)
Select this when you want to play the DVD with the subtitles in
English.
FRENCH
Select this when you want to play the DVD with the subtitles in
French.
SPANISH
Select this when you want to play the DVD with the subtitles in
Spanish.
GERMAN
Select this when you want to play the DVD with the subtitles in
German.
ITALIAN
Select this when you want to play the DVD with the subtitles in
Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 32.)
OFF
Select this if you do not want to display the subtitles. (For some
discs it is not possible to turn off the subtitle display.)
ENGLISH
Press the ENTER button to decide the menu item.
q When “DIALOG” is selected:
Use the 5 and ∞ cursor buttons to select the language, press the
ENTER button to decide.
ENGLISH (Factory default)
Select this when you want to play the DVD with the sound in
English.
FRENCH
Select this when you want to play the DVD with the sound in
French.
SPANISH
Select this when you want to play the DVD with the sound in
Spanish.
GERMAN
Select this when you want to play the DVD with the sound in
German.
ITALIAN
Select this when you want to play the DVD with the sound in
Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 32.)
ENTER
Remote control unit
Remote control unit
q
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
ON
HD JPEG MODE
OFF
SLIDE SHOW
5SEC
ANGLE MARK
ON
CAPTIONS
SELECT:
OFF
SET: ENTER BUTTON
SET DIALOG
ENTER
Remote control unit
Remote control unit
w
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
ON
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
ON
OFF
SET: ENTER BUTTON
SET SUBTITLE
29
ENGLISH
e When “DISC MENUS” is selected:
Use the 5 and ∞ cursor buttons to select the language, press the
ENTER button to decide.
ENGLISH (Factory default)
Select this when you want to display the menus in English.
FRENCH
Select this when you want to display the menus in French.
SPANISH
Select this when you want to display the menus in Spanish.
GERMAN
Select this when you want to display the menus in German.
ITALIAN
Select this when you want to display the menus in Italian.
OTHERS
Use the number buttons to input the language number.
(See “Language code list” on page 32.)
3
r When “AUTO PLAY” is selected:
OFF (Factory default)
After turning on the power, press the PLAY button to start playing
the disc.
ON
After the power turns on, disc playback starts automatically.
• A playable disc must be loaded for this function to work.
• Playback of the main program begins. The menu screen is not
displayed.
• The resume play function is disabled.
• If the repeat play mode, random play mode, etc., was set
when the power was last turned off, playback starts with those
settings.
• If the KEY LOCK mode, IR REMOTE LOCK mode, HIDE OSD
mode, etc., were turned on when the power was last turned off,
playback starts with those settings.
t When “HD JPEG MODE” is selected.
OFF (Factory default)
The JPEG image resolution is fixed at 480p.
ON
JPEG images are displayed in the most suitable resolution.
• Connect a HDTV to the HDMI connector, and select the HDMI
resolution to 720p/1080i.
• The size of the image changes depending on the size of the
JPEG file.
y When “SLIDE SHOW” is selected:
Use the 5 and ∞ cursor buttons to select the slide switching
interval, press the ENTER button to decide.
The time interval can be set within 5, 10 and 15 seconds. (The
factory default setting is 5 seconds.)
30
e
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
OFF
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
ON
OFF
SET: ENTER BUTTON
SET DISC MENUS
r
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
OFF
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
ON
OFF
SET: ENTER BUTTON
SET AUTO PLAY
t
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
OFF
HD JPEG MODE
OFF
SELECT:
SET: ENTER BUTTON
SET HD JPEG MODE
y
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
OFF
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
SET SLIDE SHOW
ON
OFF
SET: ENTER BUTTON
3
u When “ANGLE MARK” is selected:
Use the 5 and ∞ cursor buttons to select “ON”or“OFF”, press
the ENTER button to decide.
ON (factory default)
The angle mark is displayed when scenes at which angles are
recorded are played.
OFF
The angle mark is not displayed, even when scenes at which
angles are recorded are played.
u
i When “CAPTIONS” is selected:
Use the 5 and ∞ cursor buttons to select “ON”or“OFF”, press
the ENTER button to decide.
OFF (Factory default)
Select this when you do not want to display the captions on the
screen when playing DVDs containing English captions
ON
Select this to display the captions on the screen when playing
DVDs containing English captions.
i
ENGLISH
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
OFF
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
ENGLISH
DISK SETUP
DIALOG
SUBTITLE
ON
OFF
SET: ENTER BUTTON
SET ANGLE MARK
DISK SETUP
DIALOG
ENGLISH
SUBTITLE
ENGLISH
DISC MENUS
ENGLISH
AUTO PLAY
HD JPEG MODE
SLIDE SHOW
OFF
OFF
5SEC
ANGLE MARK
CAPTIONS
SELECT:
ON
OFF
SET: ENTER BUTTON
SET CAPTION
✽ To exit the setup mode
Press the SETUP button.
31
ENGLISH
NOTES:
• An English caption decoder is required to display English captions.
,
,
mark.
• DVDs with caption signals are indicated by the
English captions cannot be displayed when playing DVDs which do not contain caption signals.
• The characters in which the captions are displayed (capital letters, small letters, italics, etc.) depend on the DVD and
cannot be selected with the DN-V210/DN-V310.
Language code list
Code
32
Language
Code
Language
Code
Language
Code
Language
6565
Afar
7079
Faroese
7678
Lingala
8375
Slovak
6566
Abkhazian
7082
French
7679
Laothian
8376
Slovenian
6570
Afrikaans
7089
Frisian
7684
Lithuanian
8377
Samoan
6577
Ameharic
7165
Irish
7686
Latvian, Lettish
8378
Shona
6582
Arabic
7168
Scots Gaelic
7771
Malagasy
8379
Somali
6583
Assamese
7176
Galician
7773
Maori
8381
Albanian
6588
Aymara
7178
Guarani
7775
Macedonish
8382
Serbian
6590
Azerbaijani
7185
Gujarati
7776
Malayalam
8385
Sundanese
6665
Bashkir
7265
Hausa
7778
Mongolian
8386
Swedish
6669
Byelorussian
7273
Hindi
7779
Moldavian
8387
Swahili
6671
Bulgarian
7282
Croatian
7782
Marathi
8465
Tamil
6672
Bihari
7285
Hungarian
7783
Malay
8469
Telugu
6678
Bengali; Bangla
7289
Armenian
7784
Maltese
8471
Tajik
6679
Tibetan
7365
Interlingua
7789
Burmese
8472
Thai
6682
Breton
7378
Indonesian
7865
Nauru
8473
Tigrinya
6765
Catalan
7383
Icelandic
7869
Nepali
8475
Turkmen
6779
Corsican
7384
Italian
7876
Dutch
8476
Tagalog
6783
Czech
7387
Hebrew
7879
Norwegian
8479
Tonga
6789
Welsh
7465
Japanese
7982
Oriya
8482
Turkish
6865
Danish
7473
Yiddish
8065
Panjabi
8484
Tatar
6869
German
7487
Javanese
8076
Polish
8487
Twi
6890
Bhutani
7565
Georgian
8083
Pashto, Pushto
8575
Ukrainian
6976
Greek
7575
Kazakh
8084
Portuguese
8582
Urdu
6978
English
7576
Greenlandic
8185
Quechua
8590
Uzbek
6979
Esperanto
7577
Cambodian
8277
Rhaeto-Romance
8673
Vietnamese
6983
Spanish
7578
Kannada
8279
Romanian
8679
Volapük
6984
Estonian
7579
Korean
8285
Russian
8779
Wolof
6985
Basque
7583
Kashmiri
8365
Sanskrit
8872
Xhosa
7065
Persian
7585
Kurdish
8368
Sindhi
8979
Yoruba
7073
Finnish
7589
Kirghiz
8372
Serbo-Croatian
9072
Chinese
7074
Fiji
7665
Latin
8373
Singhalese
9085
Zulu
TOP MENU
/PBC
ENGLISH
When “SYSTEM SETUP” is selected
MENU
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
1
Set the “SYSTEM SETUP” in SETUP mode. (See page 20.)
Use the 5 and ∞ cursor buttons to select the desired setting.
OSD LANGUAGE
Use this to set the language for the default setting screen and
messages displayed on the TV screen (“PLAY”, etc.)
WALL PAPER
Use this to select the image to be shown on the screen in the stop
mode.
2
RATING LEVEL
Use this to restrict playback of adult DVDs you do not want children
to view. Note that even with adult DVDs, viewing cannot be restricted
unless the restriction level is recorded on the disc.
It is however possible to disable playback of all DVDs.
PASSWORD
Use this to change the password.
The set’s password is set to “5555” by default.
DEFAULT
Use this to restore settings changed at “INITIAL SETTINGS” to their
original (default) values.
Remote control unit
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
RATING LEVEL
PASSWORD
8
CHANGE
DEFAULT
RESET
SETUP MENU MODE
BASIC
PARENTAL CONTROL
SELECT:
ON
SET: ENTER BUTTON
SET OSD LANGUAGE
SETUP MENU MODE
The number of initial setting items can be increased.
PARENTAL CONTROL
Use this to set PARENTAL CONTROL to ON or OFF.
33
ENGLISH
Press the ENTER button to decide the menu item.
q When “OSD LANGUAGE” is selected:
Use the 5 and ∞ cursor buttons to select the language, press the
ENTER button to decide.
ENGLISH (Factory default)
Select this to set the OSD language to English.
FRANÇAIS
Select this to set the OSD language to French.
ESPAÑOL
Select this to set the OSD language to Spanish.
DEUTSCH
Select this to set the OSD language to German.
ENTER
Remote control unit
Remote control unit
q
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
w When “WALL PAPER” is selected:
Use the 5 and ∞ cursor buttons to select the background mode,
press the ENTER button to decide.
BLACK (Factory default)
Select this to display a black background on the TV display.
PICTURE
Select this to display the wallpaper on the TV display.
This wallpaper can be changed at the user’s discretion.
(See page 68.)
3
e When “RATING LEVEL” is selected:
1. Press the ENTER button.
2. Use the number buttons to input the password (a 4-digit
number), then press the ENTER button.
• The password is initially set to “5555”.
• The password can be changed by changing it to a new password
at “PASSWORD”. (See below.)
3. Use the 5 and ∞ cursor buttons to select “LEVEL”, press the
ENTER button to decide.
LEVEL 8 (factory default)
LEVEL 1 to 7
The lower the level, the stricter the restrictions.
NO LIMIT
Select this when you want to play all DVDs (for adults, general
audiences and children).
r When “PASSWORD” is selected:
1. Press the ENTER button.
2. Use the number buttons to input the previously set password
(a 4-digit number), next input the new password, then input the
new password again, and finally press the ENTER button.
• The password is initially set to “5555”.
• Be careful not to forget the password.
• The settings cannot be changed until the proper password is
input.
34
PASSWORD
CHANGE
DEFAULT
RESET
SETUP MENU MODE
BASIC
PARENTAL CONTROL
ON
SELECT:
SET: ENTER BUTTON
SET OSD LANGUAGE
w
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
PASSWORD
DEFAULT
SETUP MENU MODE
CHANGE
RESET
EXPERT
PARENTAL CONTROL
SELECT:
ON
SET: ENTER BUTTON
SET WALL PAPER
e
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
PASSWORD
DEFAULT
CHANGE
RESET
SETUP MENU MODE
EXPERT
PARENTAL CONTROL
ON
SELECT:
SET: ENTER BUTTON
SET RATING LEVEL
r
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
PASSWORD
DEFAULT
SETUP MENU MODE
CHANGE
RESET
EXPERT
PARENTAL CONTROL
SELECT:
SET PASSWORD
ON
SET: ENTER BUTTON
t
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
PASSWORD
DEFAULT
SETUP MENU MODE
CHANGE
RESET
EXPERT
PARENTAL CONTROL
y When “SETUP MENU MODE” is selected:
Use the 5 and ∞ cursor buttons to select the setup mode, press
the ENTER button to decide.
BASIC (Factory default)
EXPERT
The number of setting items for the various settings can be
increased.
SELECT:
ON
SET: ENTER BUTTON
SET DEFAULT
y
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
3
u When “PARENTAL CONTROL” is selected:
1. Press the ENTER button.
2. Use the number buttons to input the password (a 4-digit
number), then press the ENTER button.
• The password is initially set to “5555”.
3. Use the 5 and ∞ cursor buttons to select parental control “ON
or OFF”, press the ENTER button to decide.
ENGLISH
t When “DEFAULTS” is selected:
1. Press the ENTER button.
2. Use the number buttons to input the “8888”, then press the
ENTER button. The settings that have been changed at “INITIAL
SETTINGS” are restored to their initial (default) values.
PASSWORD
DEFAULT
CHANGE
RESET
SETUP MENU MODE
EXPERT
PARENTAL CONTROL
ON
SELECT:
SET: ENTER BUTTON
SETUP MENU MODE
u
SYSTEM SETUP
OSD LANGUAGE
WALL PAPER
ENGLISH
BLACK
8
RATING LEVEL
PASSWORD
DEFAULT
SETUP MENU MODE
CHANGE
RESET
EXPERT
PARENTAL CONTROL
SELECT:
ON
SET: ENTER BUTTON
SET PARENTAL CONTROL
✽ To exit the setup mode
Press the SETUP button.
35
ENGLISH
When “DivX SETUP” is selected
TOP MENU
/PBC
MENU
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
1
Set the “DivX SETUP” in SETUP mode. (See page 20.)
Use the 5 and ∞ cursor buttons to select the desired setting.
DivX SUBTITLE
Set which language to be initially displayed when playing back a DivX®
video disc.
DivX REGISTRATION
Acquires the DivX registration card of the DVD video player that you
purchased.
Remote control unit
2
DivX SETUP
DivX SUBTITLE
UNICODE
DivX REGISTRATION
SELECT:
OK
SET: ENTER BUTTON
SET DivX SUBTITLE
3
36
Press the ENTER button to decide the menu item.
q When “DivX SUBTITLE” is selected:
Use the 5 and ∞ cursor buttons to select the language, press the
ENTER button to decide.
UNICODE
Standard character code able to process multiple languages, and
includes most characters for all of the major languages.
W. EUROPEAN
Albanian, Breton, Catalonian, Danish, Dutch, English, Faroese,
Finnish, French, Gaelic, German, Icelandic, Irish, Italian, Norwegian,
Portuguese, Spanish, Swedish
TURKISH
Albanian, Danish, Dutch, English, Finnish, French, Gaelic, German,
Italian, Celtic (Latin), Norwegian, Portuguese, Spanish, Swedish,
Turkish
q
DivX SETUP
DivX SUBTITLE
UNICODE
DivX REGISTRATION
SELECT:
SET DivX SUBTITLE
OK
SET: ENTER BUTTON
3
w When “DivX REGISTRATION” is selected:
1. Press the ENTER button.
2. The registration code is displayed.
• The acquired code is for on demand DivX® video only.
Do not use the same code for a different application or website.
ENGLISH
C. EUROPEAN
Albanian, Croatian, Czech, Dutch, English, German, Hungarian,
Irish, Polish, Rumanian, Slovenian, Serbian
CYRILLIC
Bulgarian, Belarusian, English, Macedonian, Moldavian, Russian,
Serbian, Ukrainian
GREEK
English, modern Greek
HEBREW
English, modern Hebrew
ARABIC
Arabic
BALTIC
Baltic
VIETNAM
Vietnamese
• These cannot be set if there are no subtitles recorded on the
DivX® disc.
• Subtitle files with the following extensions can be set.
sut, sub, txt, smd, ssa, ass, psp
w
DivX SETUP
DivX SUBTITLE
UNICODE
DivX REGISTRATION
SELECT:
OK
SET: ENTER BUTTON
SET DivX REGISTRATION
✽ To exit the setup mode
Press the SETUP button.
37
ENGLISH
. PLAYBACK
(1) Playback
DVD POWER
2, 4
OPEN/CLOSE
3
2, 4
TOP MENU
/PBC
MENU
7
6
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
1
1
5
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
Turn on the power.
• Press the power button, the power indicator lights and
the power turn on.
• When standby mode, press the DVD POWER button of
remote control unit.
Main unit
OPEN/CLOSE
2
Press the OPEN/CLOSE button to open the disc tray.
Main unit
3
38
Set the disc in the disc tray.
Remote control unit
5
4
Press the OPEN/CLOSE button.
• For many interactive DVDs and video CDs with
playback control, a menu screen appears. In this case
use the procedure in step 6 to select the desired item.
✽ Interactive DVDs are DVDs including multiple angles,
stories, etc.
Main unit
Example: For DVDs with menu
screens
TOP MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
ENGLISH
OPEN/CLOSE
Remote control unit
Example: For video CDs with
playback control
1. Opening
2. 1st movement
3. 2nd movement
4. 3rd movement
5
Press the PLAY button.
Main unit
6
5. Ending
Use the cursor buttons (5, ∞, 2 and 3) to select the
desired item.
• For some discs there is a second menu screen. If so,
press the 9 button to display the next menu screen.
(See the disc’s jacket.)
✽ The cursor buttons (5, ∞, 2 and 3) do not work for
video CDs. Use the number buttons to select the
desired item.
Remote control unit
Remote control unit
ENTER
7
Press the ENTER button.
• The desired item is selected and playback starts.
• You can return to the menu screen by pressing the
TOP MENU button while the DVD is playing, though
this depends on the disc.
• Press the RETURN button during playback of a video
CD to return to the menu screen.
Remote control unit
Example: When “Apple” is
selected
TOP MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Apple
NOTES:
• If “ not allowed at the moment” appears on the TV screen while buttons are being operated, that operation is not
possible on the DN-V210/DN-V310 or with that disc.
• Set the disc in the disc guide.
• Do not place more than one disc in the disc tray.
• The disc keeps turning while the menu screen is displayed on the TV screen.
• When the auto play mode is turned on, playback of the main program begins. The menu screen is not displayed.
39
ENGLISH
TOP MENU
/PBC
MENU
ENTER
STOP button
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
SLOW/SEARCH
buttons
STILL/PAUSE button
STOP button
STILL/PAUSE button
PLAY
SKIP
SKIP buttons
SETUP NTSC/PAL ZOOM SLIDE SHOW
SKIP button
(2) Stopping Playback
During playback, press the STOP button on the main unit or the
remote control unit, playback stops and wall paper is displayed.
Resume play memory function
• With the DN-V210/DN-V310, when the STOP button is pressed,
that position is stored in the memory. At this time, “rESUME” is
displayed on the display.
• When the PLAY button is pressed after pressing the STOP
button, playback resumes from the position at which it was
stopped.
• The resume play memory function is canceled if the disc tray is
opened or the STOP button is pressed a second time.
• If you do not want to continue playing the disc, to save electricity
either press the DVD POWER button on the remote control unit
to set the power to the standby mode.
Main unit
Remote control unit
✽ The resume play memory function only works
for discs for which the elapsed time is shown
on the display during playback.
✽ The resume play function is disabled when the
AUTO PLAY mode is turned on.
(3) Playing Still Pictures (Pausing)
During playback, press the STILL/PAUSE button on the main unit or
the remote control unit.
• Press the PLAY button to resume normal playback.
Main unit
40
Remote control unit
During playback, press one of the SLOW/SEARCH buttons on the
remote control unit.
1 : Reverse direction
¡ : Forward direction
• When pressed again, the search speed increases (in four steps).
• Variable in 3 steps for CDs and video CD discs, 4 steps for DVD
video.
• Press the PLAY button to resume normal playback.
ENGLISH
(4) Forward/Reverse Searching
Remote control unit
(5) Skipping to the Beginning of Chapters or Tracks
During playback, press one of the skip buttons on the main unit or
the remote control unit.
4 : Reverse direction
¢ : Forward direction
• A number of chapters or tracks equal to the number of times the
button is pressed is skipped.
• When the skip back button is pressed once, the pickup returns to
the beginning of the currently playing chapter or track.
Playing position
Chapter/Track
Chapter/Track
Chapter/Track
Chapter/Track
Main unit
Remote control unit
NOTE:
• In some cases the menu screen may reappear
when one of the SKIP buttons is pressed during
menu playback on a video CD.
Reverse direction , / Forward direction (direction of playback)
(6) Playing Frame by Frame (for DVDs only)
During playback, press the STILL/PAUSE button on the main unit or
the remote control unit.
• The picture moves forward one frame each time the button is
pressed.
• Press the PLAY button to resume normal playback.
Main unit
Remote control unit
(7) Slow Playback (for DVDs only)
In the still mode, press one of the SLOW/SEARCH buttons on the
remote control unit.
1 : Reverse direction
¡ : Forward direction
Remote control unit
41
ENGLISH
⁄0 PLAYING REPEATEDLY
■ Use this function to play your favorite audio or video sections repeatedly.
Playing Repeatedly (Repeat Playback)
1
2
3
4
5
6
7
8
9
PROG /
DIRECT
CALL
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
1
RC-963
In the play mode,
• Main unit :
Press the SHIFT and 4 buttons
simultaneously for 3 seconds.
• Remote control unit :
Press the REPEAT button.
• The display on the TV screen
switches each time the button
is pressed, and the corresponding
repeat play or stop mode is set.
q For DVD video discs
w For video CD
• Normal playback
• Normal playback
• Chapter repeated
• Track repeated
CHAPTER REPEAT
TRACK REPEAT
1
• Title repeated
TITLE REPEAT
• Entire disc repeated
DISC REPEAT
Main unit
• Repeat playback cancelled
REPEAT
Remote control unit
42
REPEAT OFF
• Repeat playback cancelled
REPEAT OFF
r For MP3/WMA
• Normal playback
• Normal playback
View Filter
t For JPEG/DivX
ENGLISH
e For CD
• Normal playback
View Filter
Repeat
: Off
Repeat
: Off
Mode
: Normal
Mode
: Normal
• File repeated
• Track repeated
• File repeated
View Filter
TRACK REPEAT
View Filter
Repeat
: Single
Repeat
: Single
Mode
: Normal
Mode
: Normal
• Folder repeated
FOLDER REPEAT
• Entire disc repeated
1
• Folder repeated
View Filter
View Filter
Repeat
: Folder
Repeat
: Folder
Mode
: Normal
Mode
: Normal
• Entire disc repeated
• Entire disc repeated
View Filter
View Filter
Repeat
: Disc
Repeat
: Disc
Mode
: Normal
Mode
: Normal
• Repeat playback cancelled
• Entire disc repeated
DISC REPEAT
• Repeat playback cancelled
REPEAT OFF
• Repeat playback cancelled
View Filter
View Filter
Repeat
: Off
Repeat
: Off
Mode
: Normal
Mode
: Normal
✽ To return to normal playback:
Return to normal playback by pressing the REPEAT button until “REPEAT OFF” appears on the TV screen.
43
ENGLISH
Playing a Certain Section Repeatedly (A-B Repeat Playback)
DVD POWER
OPEN/CLOSE
1
2
3
4
5
6
7
8
PROG /
DIRECT
CALL
9
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
1,2
RC-963
A TO B SET A
1
During playback, press the A-B button.
• This sets start point A.
Remote control unit
A TO B SET B
2
Press the A-B button again.
• This sets end point B, and repeat playback of the A-B
section starts.
Remote control unit
✽ To return to normal playback:
Press the A-B button until “A TO B CANCELED” appears on the TV screen.
NOTES:
• Repeat playback may not work for some DVDs.
• The repeat playback and A-B repeat playback functions will not work for DVDs and video CDs for which the elapsed
time is not shown on the display during playback.
• Repeat playback is not possible when PBC is turned on with video CDs. Press the TOP MENU button to turn PBC off.
• The Play button cannot be used during A-B Repeat.
• If you switch to the SETUP MENU screen during A-B Repeat, A-B Repeat is canceled.
44
■ Use this function with DVD, Video CD, CD, MP3, WMA, DivX and JPEG to play the
tracks in the desired order.
1
2
3
4
5
6
7
8
9
0
+10
PROG /
DIRECT
2
1
CALL
CLEAR
RANDOM
/PBC
MENU
2
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
3
SLOW/SEARCH
PROGRAM
NO. TITLE
Mode :PROGRAM
1
For DVD:
In the stop mode, press the PROG/DIRECT button once.
• The program selection screen appears.
01
...
PLAY
02
...
Clear Program
03
...
04
...
05
...
Remote control unit
2
Press the 3 cursor button to set the title number in the
program mode.
Use the number buttons to select the number of the title
you want to program.
Next, press the 3 cursor, and enter the right side
chapter.
Press the ∞ cursor button. To program other titles and
chapters, select one title and chapter number at a time
and press the 5 and ∞ cursor buttons after each number
is selected.
• Up to 99 tracks can be programmed.
EX: To program title 5, chapter 1 and title 12:
PROGRAM
Mode :PROGRAM
3
NO. TITLE
01
05
PLAY
02
...
Clear Program
03
...
04
...
05
...
CHAPTER
01
...
...
...
...
...
PROGRAM
Mode :PROGRAM
Remote control unit
NO. TITLE
01
05
PLAY
02
1.
Clear Program
03
...
04
...
05
...
CHAPTER
01
...
...
...
...
...
SKIP
CHAPTER
...
...
...
...
...
...
Remote control unit
PROGRAM
NO. TITLE
Mode :PROGRAM
01
05
PLAY
02
12
Clear Program
03
...
04
...
05
...
CHAPTER
01
...
...
...
...
...
Press the PLAY button.
• Playback of the tracks in the programmed order begins.
Main unit
Remote control unit
✽ To return to normal playback:
Press the STOP button to stop programmed playback, then press the PROG/DIRECT button. Press the ENTER button to
switch the mode from “PROGRAM” to “NORMAL”.
Press the PLAY button to start normal playback from the beginning of the disc.
✽ To clear tracks from the program:
Press the STOP button, then press the PROG/DIRECT button.
Use the 3, 5 and ∞ cursor buttons to select the title and chapter number you want to clear.
Press the CLEAR button to clear the track.
✽ To clear the entire program:
The entire program is cleared when the power is turned off or the disc is ejected.
Also, when the STOP button is pressed to stop programmed playback and the PROG/DIRECT button is pressed.
Press the 5 and ∞ cursor buttons to select “Clear Program”, then press the ENTER button. At this time, the entire
program is cleared.
✽ Front panel display:
Title and Chapter number of the track being played is displayed.
45
ENGLISH
⁄1 PLAYING TRACKS IN THE DESIRED ORDER
ENGLISH
NOTE:
• Programmed playback is not possible when PBC is turned on with video CDs.
Press the TOP MENU button to turn PBC off.
1
2
3
4
5
6
7
8
9
PROG /
DIRECT
2
CALL
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
/PBC
1
MENU
2
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
3
SLOW/SEARCH
PROGRAM
NO. TRACK
Mode :PROGRAM
1
For Video CD:
In the stop mode, press the PROG/DIRECT button once.
• The program selection screen appears.
01
...
PLAY
02
...
Clear Program
03
...
04
...
05
...
Remote control unit
2
Press the 3 cursor button to set the track number in the
program mode.
Use the number buttons to select the number of the
track you want to program.
Press the ∞ cursor button. To program other tracks,
select one track number at a time and press the 5 and ∞
cursor buttons after each number is selected.
• Up to 99 tracks can be programmed.
EX: To program track 5 and track 12:
PROGRAM
Mode :PROGRAM
3
NO. TRACK
01
05
PLAY
02
...
Clear Program
03
...
04
05
PROGRAM
Mode :PROGRAM
Remote control unit
NO. TRACK
SKIP
Remote control unit
PROGRAM
NO. TRACK
01
05
Mode :PROGRAM
01
05
PLAY
02
1.
PLAY
02
12
Clear Program
03
...
Clear Program
03
...
...
04
...
04
...
...
05
...
05
...
Press the PLAY button.
• Playback of the tracks in the programmed order begins.
Main unit
Remote control unit
✽ To return to normal playback:
Press the STOP button to stop programmed playback, then press the PROG/DIRECT button. Press the ENTER button to
switch the mode from “PROGRAM” to “NORMAL”.
Press the PLAY button to start normal playback from the beginning of the disc.
✽ To clear tracks from the program:
Press the STOP button, then press the PROG/DIRECT button.
Use the 3, 5 and ∞ cursor buttons to select the title and chapter number you want to clear.
Press the CLEAR button to clear the track.
✽ To clear the entire program:
The entire program is cleared when the power is turned off or the disc is ejected.
Also, when the STOP button is pressed to stop programmed playback and the PROG/DIRECT button is pressed.
Press the 5 and ∞ cursor buttons to select “Clear Program”, then press the ENTER button. At this time, the entire
program is cleared.
✽ Front panel display:
Track number of the track being played back is displayed.
46
1, 2, 3, 4
ENGLISH
RC-963
TOP MENU
/PBC
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
5
1
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
File Menu
1
For CD/MP3/WMA/DivX/JPEG:
Use the 3, 5 and ∞ cursor buttons to turn the Edit Mode
at the top right of the file menu ON.
• When playing CD/MP3/WMA files, the file menu is
always displayed on the screen.
• When playing JPEG/DivX, press the MENU or STOP
button to display the file menu.
Track01
Edit Mode
: ON
Track02
Program View
Track03
Add to Program
Track04
Track05
Track06
Music Playing
Track07
Track08
2
Use the 2, 5 and ∞ cursor buttons to select the tracks or files you want to pragram in the file menu.
Press the ENTER button to decide.
• At this time, check mark is displayed on the track or file.
To program other tracks, select one track at a time and press the ENTER button after each track is selected.
3
Use the 3, 5 and ∞ cursor buttons to select “Add to Program” in the file menu.
Press the ENTER button to set the program tracks or files.
• At this time, the displayed check marks disappear.
Use the 5 and ∞ cursor buttons to select “Program View” in the file menu.
Press the ENTER button to display the program list.
• The selected tracks are displayed as a program list.
4
✔
✔
Track01
Edit Mode
: ON
Edit Mode
: ON
Track01
Edit Mode
: ON
Program View
Track02
Program View
Track03
Browser View
Track03
Add to Program
Track03
Add to Program
Track05
Clear Program
Track04
Track04
✔
Track01
Track02
Track05
Track05
Track06
Track06
Track07
Track08
Music Playing
Track07
Music Playing
Music Playing
Track08
47
ENGLISH
5
Press the PLAY button.
• Playback of the tracks in the programmed order begins.
Main unit
Remote control unit
✽ When there are less than 2 folders for MP3/WMA/JPEG/DivX files:
Repeat steps 2 and 3 above for each individual folder, and add files to be programmed. The added files can be verified in
the Program View.
✽ To returan to normal playback:
Use the 3, 5 and ∞ cursor buttons to select “Browser View” in the file menu.
Press the ENTER button to display the all tracks or files.
✽ To clear tracks or files from the program.
Press the STOP button to switch to the STOP status. When the Program list is displayed, use the 3, 5 and ∞ cursor
buttons to select the tracks or files that you want to clear.
A check mark is added next to the track or file.
Use the 3, 5 and ∞ cursor buttons to select “Clear Program” in the file menu.
Press the ENTER button to clear the all track or files from the program list.
To clear all tracks or files, add a check mark next to all of the tracks or files in the program list.
✽ To clear the entire program:
The entire program is cleared when the power is turned off or the disc is ejected.
✽ Front panel Display:
Program number is displayed.
48
■ Use this function with Video CD, CD, MP3, WMA, DivX and JPEG to play the tracks
in random order.
This function does not affect with DVD.
NOTE:
• Random playback is not possible when PBC is turned on with video CDs.
Press the TOP MENU button to turn PBC off.
CALL
7
8
9
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
1
RC-963
TOP MENU
/PBC
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
2
SLOW/SEARCH
1
2
For Video CD:
In the stop mode, press the RANDOM button.
• The random play screen appears.
• Random playback is not possible for some discs.
SKIP
RANDOM ON
Remote control unit
Press the PLAY button.
• The tracks start playing in random order.
Main unit
Remote control unit
✽ To return to normal playback:
Press the STOP button to stop random playback, then press the RANDOM button once.
1
2
For CD, MP3, WMA, DivX and JPEG:
In the stop mode, press the RANDOM button.
• The Control Menu Mode changes from Normal to
Random.
Use the 2, 3, 5, and ∞ cursor buttons to select Mode,
and press the ENTER button to set Random Mode.
Track 01
Repeat
: Off
Track 02
Mode
: Ramdom
Track 03
Edit mode
: ON
Track 04
Track 05
Track 06
Track 07
JPEG Preview
Track 08
Press the PLAY button.
• The tracks start playing in random order.
Main unit
Remote control unit
✽ The Random button and cursor button can also be used during playback to switch to Random play.
RANDOM ON is displayed on the screen during DivX/JPEG playback.
✽ To return to normal playback:
Press the RANDOM button during Random play.
Use the cursor buttons to select Mode and press ENTER to return to Normal Play.
49
ENGLISH
⁄2 PLAYING TRACKS IN THE RANDOM ORDER
ENGLISH
⁄3 USING THE ON-SCREEN DISPLAY
■ Use this function to display and change information on the disc (titles, chapters,
time, etc.)
1
2
3
4
5
6
7
8
9
PROG /
DIRECT
CALL
NOTE:
• The on-screen display function does not work when PBC is turned on with
video CDs. Press the TOP MENU button to turn PBC off.
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
3
RC-963
TOP MENU
/PBC
MENU
3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
1,2
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
In the play mode, press the DISPLAY button.
• The On-Screen Display appears.
• The picture on the TV screen switches each time the button is pressed.
• The items displayed differ from disc to disc.
Remote control unit
Example: For DVD video discs
T 01/10 C 01/10
0:00:01
AUDIO
1/2
D
ENG
SUBTITLE 2/4 ENG
2
Example: For video and music CDs
TRACK
SINGLE ELAPSED
3
50
01/10
0:26:11
SINGLE REMAIN
0:03:17
TOTAL ELAPSED
0:06:15
TOTAL REMAIN
0:32:05
Input using the number buttons, then press the ENTER button.
q Changing the elapsed time
Use the 2 and 3 cursor buttons to select the elapsed time. The selected item
is displayed with a blue frame.
• For DVDs
Example : For 1 Hour 32 minute 47 seconds / “13247”
: For 1 minute 26 seconds / “00126”
• For video and music CDs
Example : For 1 minute 26 seconds / “0126”
w Changing the title, track or chapter
• For DVDs
Use the 2 and 3 cursor buttons to select the track.
Input using the number buttons, then press the ENTER button.
• For video and music CDs
Use the 5 and ∞ cursor buttons to select the track. The selected item is
displayed with a blue frame.
Input using the number buttons. Playback starts from that track.
Remote control unit
ENTER
Remote control unit
ENGLISH
⁄4 USING THE MULTIPLE AUDIO, SUBTITLE AND ANGLE FUNCTIONS
Switching the Audio Language (Multiple Audio Function)
■ With DVDs containing multiple audio language signals, the audio language can be switched during playback.
1
2
3
4
5
6
7
8
9
PROG /
DIRECT
CALL
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
1,2
RC-963
TOP MENU
/PBC
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
During playback, press the AUDIO button.
• The current audio language number is displayed.
AUDIO
1/3
D
ENG
AUDIO
2/3
D
SPA
Remote control unit
2
Use the AUDIO buttons to select the desired language.
Remote control unit
NOTES:
• With some discs it is not possible to change the audio language during playback. In such cases, select from the DVD
menu. (See page 29.)
• If the desired language is not set after pressing the AUDIO buttons several times, the disc does not include that
language.
• The language selected in the default settings (See page 29.) is set when the power is turned on and when the disc is
replaced.
51
ENGLISH
Switching the Subtitle Language (Multiple Subtitle Function)
■ With DVDs containing multiple subtitle language signals, the subtitle language can be switched during playback.
1
2
3
4
5
6
7
8
9
PROG /
DIRECT
CALL
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
1,2
RC-963
TOP MENU
/PBC
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
SUBTITLE 1/2 ENG
During playback, press the SUBTITLE button.
• The current subtitle language number is displayed.
Remote control unit
2
SUBTITLE 2/2 SPA
Use the SUBTITLE button to select the desired language.
Remote control unit
NOTES:
• If the desired language is not set after pressing the SUBTITLE button several times, the disc does not include that
language.
• The subtitle language set with the default settings (See page 29.) is set when the power is turned on and when the
disc is replaced. If that language is not included on the disc, the disc’s default language is set.
• When the subtitle language is changed, several seconds may be required for the new language to appear.
• When a disc supporting the closed caption is played, the subtitle and the closed caption may overlap each other on the
TV monitor. In this case, turn the subtitle off.
52
Switching the Angle (Multiple Angle Function)
TOP MENU
/PBC
ENGLISH
■ With DVDs containing multiple angle signals, the angle can be switched during playback.
MENU
ENTER
ANGLE
1,2
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
3/5
1
During playback, press the ANGLE button.
• The current angle number is displayed.
Remote control unit
4/5
2
Use the ANGLE button to select the desired angle.
Remote control unit
NOTES:
• The multiple angle function only works with discs on which multiple angles are recorded.
• “ANGLE” lights on the main unit’s display when playing a section recorded in the multi-angle mode.
• At scenes where multiple angles are recorded, the angle can be switched.
53
ENGLISH
⁄5 USING THE MENUS
Using the Top Menu
■ For DVDs containing multiple titles, the desired title can be selected and played from the top menu.
1
2
3
4
5
6
7
8
9
PROG /
DIRECT
CALL
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
2
RC-963
1
TOP MENU
/PBC
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
3
2
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
Example:
TOP MENU
1
During playback, press the TOP MENU button.
• The top menu appears.
Remote control unit
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Example:
When “Orange” is selected
2
Use the cursor or number buttons to select the desired
title.
Remote control unit
TOP MENU
Apple
Banana
Orange
Strawberry
Peach
Pineapple
Remote control unit
ENTER
3
Press the ENTER button.
• Playback starts.
• Playback also starts if the PLAY button is pressed.
Remote control unit
54
■ Some DVDs include special menus called DVD menus.
For example, DVDs with complex contents may contain guide menus, and DVDs with multiple languages may contain
audio and subtitle language menus.
These menus are called “DVD menus”.
Here we describe the general procedure for using DVD menus.
1
2
3
4
5
6
7
8
PROG /
DIRECT
CALL
2
9
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
RC-963
TOP MENU
/PBC
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
1
3
2
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
Example:
DVD MENU
1
During playback, press the MENU button.
• The DVD menu appears.
1. SUB TITLE
2. AUDIO
Remote control unit
3. ANGLE
Example:
“AUDIO” is selected
2
Use the cursor or number buttons to select the desired
item.
• If you select the item using the number buttons, skip
step 3 below.
Remote control unit
DVD MENU
1. SUB TITLE
2. AUDIO
3. ANGLE
Remote control unit
ENTER
3
Press the ENTER button.
• The selected item is set.
• If more menus appear, repeat steps 2 and 3.
Remote control unit
55
ENGLISH
Using the DVD Menu
ENGLISH
⁄6 PLAYING IN THE ZOOM MODE
1
2
3
4
5
6
7
8
PROG /
DIRECT
CALL
9
0
+10
SUBTITLE
AUDIO
CLEAR
RANDOM
REPEAT
A-B REPEAT
RC-963
TOP MENU
/PBC
2
MENU
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
SLOW/SEARCH
PLAY
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
1
2
In the play or pause mode, press the ZOOM button.
• The zoom rate increases each time the ZOOM button
is pressed.
For DVD Video CD, JPEG and DivX:
ZOOM OFF
ZOOM 1
ZOOM 3
ZOOM 2
Remote control unit
Use the cursor buttons (∞, 5, 2 and 3) to move the
zoomed picture.
Remote control unit
NOTES:
• Zooming is not possible with some discs.
• The zoom function may not work properly at some scenes.
• Zooming is not possible at the top menu or the menu screen.
• Zooming is not possible during playback when “HD JPEG MODE” is set to ON.
56
Listening to MP3/WMA CD, CD-Rs and CD-RWs
■ There are many music distribution sites on the internet from which music files in MP3/WMA format can be downloaded.
Music downloaded as instructed on the site and written onto a CD-R/RW disc can be played on the DN-V210/DN-V310.
If music recorded on commercially available music CDs is converted on a computer into MP3/WMA files using an MP3/
WMA encoder (conversion software), the data on a 12 cm CD is reduced into about 1/10 the amount of the original data.
Thus, when written in MP3/WMA format, the data of about 10 music CDs can fit onto a single CD-R/RW disc. A single CDR/RW disc can contain over 100 tracks.
✽ Values when 5-minute tracks are converted with a standard bit rate of 128 kbps into MP3/WMA files and using a CD-R/
RW disc with a capacity of 650 MB.
✽ Uses of recordings you have made other than for your personal enjoyment are not permitted under the
copyright law without permission of the copyright holder.
TOP MENU
/PBC
1
MENU
1 3
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
3
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
Load the CD-R/RW disc on which the MP3/WMA format
music files have been written into the DN-V210/DN-V310.
(See page 19.)
• When the disc is loaded in the DN-V210/DN-V310, the
disc information screen appears.
FOLDER 01
Edit Mode
: Off
FOLDER 02
Program View
FOLDER 03
Add to Program
FOLDER 04
FOLDER 05
JPEG Preview
• If there are multiple folders, proceed to step 2.
• If there are no folders on the disc, proceed to step 3.
Use the 5 and ∞ cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
FOLDER 01
2
• If there are multiple folders furthermore, proceed to
step 2.
: Off
Program View
FOLDER 03
Add to Program
FOLDER 04
Remote control unit
✽ To change the folder
Use the 5 and ∞ cursor buttons to select “ Up..” at
the upper of the screen, then press the ENTER button.
The another folders reappear in the disc information
screen. Select the desired folder.
Edit Mode
FOLDER 02
FOLDER 05
JPEG Preview
ENTER
Remote control unit
57
ENGLISH
⁄7 MP3/WMA FILE PLAYBACK
ENGLISH
Use the 5 and ∞ cursor buttons to select the MP3/WMA
file you want to play, then press the PLAY button or
ENTER button.
• Playback starts.
UP. . .
Edit Mode
: Off
File 01
Program View
File 02
Add to Program
File 03
File 04
3
✽ The display can be switched between the single
elapsed time and the single remaining time by pressing
the DISPLAY button.
✽ To change the MP3/WMA file
Press the STOP button, then use the 5 and ∞ cursor
buttons to reselect the desired MP3/WMA file.
✽ To return to the initial disc information screen
Use the 5 cursor button to select “ Up..” at the
upper left of the screen, then press the ENTER button.
The screen in step 1 reappears.
File 05
File 06
JPEG Preview
File 07
Remote control unit
ENTER
Remote control unit
Main unit
Remote control unit
NOTES:
• The DN-V210/DN-V310 is compatible with the “MPEG-1 Audio Layer 3” standards (sampling frequency of 44.1 kHz)
and WMA. It is not compatible with such other standards as “MPEG-2 Audio Layer 3”, “MPEG-2.5 Audio Layer 3”,
MP1, MP2, etc.
• It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.
• The digital signals output when playing MP3/WMA files are MP3/WMA signals converted into PCM, regardless of
whether the audio output presetting is set to “normal” or “PCM”.
• In general, the higher an MP3 file’s bit rate, the better the sound quality. On the DN-V210/DN-V310, we recommend
using MP3 files recorded with bit rates of 128 kbps or greater.
WMA files are 64kps or greater.
• MP3/WMA files may not be played in the expected order, since the writing software may change the position of the
folders and the order of the files when writing them on the CD-R/RW.
• When writing MP3/WMA files on CD-R/RW discs, set the writing program to store the files in the “ISO9660 level 1,
level 2 or Joliet” format. The physical format of the CD to Mode1, Mode2, or XA Form1.
• With the DN-V210/DN-V310 it is possible to display folder names and file names on the screen like titles. The DN-V210/
DN-V310 can display up to 15 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.
• Total number of folders is less than 256, and the total number of files is less than 1000.
• Be sure to add the extension “.MP3” to MP3 files,. “.WMA” to WMA files. Files cannot be played if they have any
extension other than “.MP3/.WMA” or if they have no extension.
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the
surface of a disc, the disc may get stuck inside the DN-V210/DN-V310 and be impossible to eject.
• The DN-V210/DN-V310 is not compatible with packet write software.
58
■ Uses of recordings you have made other than for your personal enjoyment are not permitted under the copyright
law without permission of the copyright holder.
Playing still pictures stored on CD-Rs/RWs
TOP MENU
/PBC
1
MENU
1 3
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
3
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
Load the CD-R/RW on which the still pictures have been
written into the DN-V210/DN-V310.
• When the disc is loaded in the DN-V210/DN-V310, the
disc information screen appears.
Folder_01
View Filter
Folder_02
Repeat
: Off
Folder_03
Mode
: Normal
File_01
File_02
File_03
File_05
Use the 5 and ∞ cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
2
✽ To change the folder
Use the 5 and ∞ cursor buttons to select “ Up..” at
the upper of the screen, then press the ENTER button.
The another folders reappear in the disc information
screen. Select the desired folder.
JPEG Preview
File_04
• If there are multiple folders proceed to step 2.
• If there are no folders on the disc, proceed to step 3.
Folder_01
View Filter
Folder_02
Repeat
: Off
Folder_03
Mode
: Normal
File_01
Remote control unit
File_02
File_03
File_04
JPEG Preview
File_05
ENTER
Remote control unit
59
ENGLISH
⁄8 PLAYING STILL PICTURE FILES (JPEG format)
ENGLISH
UP. . .
View Filter
Fiel_01
Repeat
: Off
Fiel_02
Mode
: Normal
Fiel_03
Use the 5 and ∞ cursor buttons on the remote control
unit to select the still picture file from which you want
to start the slide show, then press the PLAY button or
ENTER button on the remote control unit.
• The slide show starts.
• Only the still picture files in the selected folder are
played.
3
✽ Once all the still picture files in the folder have been
played, the disc information screen reappears.
✽ The image size (W:xxx, H:xxx) is displayed below the
JPEG Preview.
✽ Press the TOP MENU button in the file menu display
to switch to the thumbnail display. Press the STOP
button during thumbnail display to return to the file
menu.
Fiel_04
Fiel_05
Fiel_06
Fiel_07
W : 1452 H : 995
Remote control unit
ENTER
Remote control unit
Main unit
Remote control unit
Thumbnail display
✽ To display menu screen of the still pictures stored on the disc at once:
• Press the MENU button to display up to menu screen at once.
• To select and view a still picture (to start the slide show from a specific still picture), use the cursor buttons (∞, 5, 2
and 3) to select the desired still picture, then press the ENTER button.
✽ To temporarily stop the slide show:
• Press the STILL/PAUSE button.
• To resume the slide show, press the PLAY button.
✽ To cue a still picture you want to view (from which you want to start the slide show):
• During the slide show, press one of the SKIP (4, ¢) buttons. Press the SKIP 4 button to cue back to the
previous still picture, the SKIP ¢ button to cue ahead to the next still picture.
✽ Flipping and rotating still pictures:
• Use the cursor buttons (∞, 5, 2 and 3) to flip the still picture.
5 cursor button: The currently displayed still picture is flipped vertically.
∞ cursor button: The currently displayed still picture is flipped horizontally.
2 cursor button: The currently displayed still picture is rotate 90° counterclockwise.
3 cursor button: The currently displayed still picture is rotate 90° clockwise.
✽ Play the image in the zoom mode.
• In the play or pause mode, press the ZOOM button to zoom.
The zoom rate increases each time ZOOM button is pressed. (ZOOM OFF → ZOOM 1→ ZOOM 2→ ZOOM 3 →
ZOOM OFF)
• When the image is zoomed, use the cursor buttons (∞, 5, 2 and 3) to move the zoomed picture.
• Continuous playback (SLIDE SHOW) is possible in the zoom mode.
✽ The way of switching to the next image during continuous JPEG image playback (SLIDE SHOW) can be selected.
• Press the SLIDE SHOW button on the remote control unit.
• Select from SLIDE SHOW MODE 1 to MODE 6, RAND and NONE.
✽ Operating the SETUP menu is not possible during the playback of still pictures.
60
ENGLISH
Special play modes for MP3/WMA and JPEG files
• FOLDER (the MP3/WMA and JPEG files in the folder are played in order starting from the selected file)
• FOLDER REPEAT (all the MP3/WMA and JPEG files in the folder are played repeatedly starting from the selected file)
• DISC (all the MP3/WMA and JPEG files on the disc are played in order starting from the selected file)
• DISC REPEAT (all the MP3/WMA and JPEG files on the disc are played repeatedly starting from the selected file)
• RANDOM ON (all the MP3/WMA and JPEG files in the folder are played in random order starting from the selected file)
• Music and Picture playback. (Select JPEG files during MP3/WMA playback to playback music and images at the same
time.)
• During disc repeat playback of Music and Pictures, only the pictures within one folder are played repeatedly.
• When the Pause button is pressed during music and picture playback, only the playback of pictures is paused.
• When the play mode is HD JPEG ON, the playback of music and pictures is not possible.
NOTES:
• The DN-V210/DN-V310 is compatible with image data stored in JPEG format, but DN-V210/DN-V310 does not
guarantee that all image data stored in JPEG format can be viewed.
• It may not be possible to play some CD-Rs/RWs due to disc properties, dirt, scratches, etc.
• When storing JPEG files on the CD-R/RW, set the writing program to store the files in the “ISO9660 level 1, level 2 or
Joliet” format. The physical format of the CD to Mode1, Mode2, or XA Form1.
• With the DN-V210/DN-V310 it is possible to display folder names and file names on the screen like titles. The DN-V210/
DN-V310 can display up to 15 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.
• Total number of folders is less than 999, and the total number of files is less than 727.
• Be sure to give JPEG files the extension “.JPG”. Files with other extensions or with no extensions cannot be viewed
on the DN-V210/DN-V310.
• The maximum possible image size (in pixels) for displaying JPEG is as shown below.
2048 × 1536
If the maximum size is exceeded, the area that exceeds the maximum is cut.
• If the file size of a JPEG is large, reading the file may take a while.
• Picture sizes on the TV display differ depending on JPEG image sizes.
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the
surface of a disc, the disc may get stuck inside the DN-V210/DN-V310 and be impossible to eject.
• JPEG files written using Macintosh computers cannot be played.
61
ENGLISH
⁄9 DivX FILE PLAYBACK
Playing Picture CDs (JPEG format)
■ Playing Picture CDs
The DN-V210/DN-V310 can play Kodak Picture CDs, so you can view the photographs stored on them on a TV screen.
(Picture CDs is CDs containing photographs taken on conventional silver film cameras which have been converted into
digital data. For details on Picture CDs, please contact a store providing Kodak development services.
■ Uses of recordings you have made other than for your personal enjoyment are not permitted under the copyright
law without permission of the copyright holder.
1
1 2
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
2
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
PICTURES
1
2
Load the CD-R/RW disc on which the DivX files have
been written into the DN-V210/DN-V310. (See page 19.)
• When the disc is loaded in the DN-V210/DN-V310, the
disc information screen appears.
View Filter
Repeat
: Off
Mode
: Normal
JPEG Preview
Press the Play button to start the Picture CD. Playback st
rts, and the images switch automatically.
Main unit
Remote control unit
✽ Press the stop button to stop playback.
✽ Once all the still picture files in the folder have been played, the disc information screen reappears.
✽ The same operations as playing still picture files (JPEG format) can be used. (See pages 59, 60.)
62
Playing DivX movies stored on CD-Rs/RWs
TOP MENU
/PBC
1
ENGLISH
■ DivX files recorded onto CD-Rs or CD-ROMs can be played back.
MENU
1 3
2,3
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
3
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
Load the CD-R/RW disc on which the DivX files have
been written into the DN-V210/DN-V310. (See page 19.)
• When the disc is loaded in the DN-V210/DN-V310, the
disc information screen appears.
DivX_01
View Filter
DivX_02
Repeat
: Off
DivX_03
Mode
: Normal
JPEG Preview
• If there are multiple folders, proceed to step 2.
• If there are no folders on the disc, proceed to step 3.
Use the 5 and ∞ cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
2
✽ To change the folder
Use the 5 and ∞ cursor buttons to select “ Up..” at
the upper of the screen, then press the ENTER button.
DivX_01
View Filter
DivX_02
Repeat
: Off
DivX_03
Mode
: Normal
Remote control unit
JPEG Preview
ENTER
Remote control unit
63
ENGLISH
Use the 5 and ∞ cursor buttons on the remote control
unit to select the DivX file you want to start the DivX
movies, then press the PLAY button or ENTER button on
the remote control unit.
• Playback starts.
UP. . .
View Filter
DivX_02
Repeat
: Off
DivX_03
Mode
: Normal
File_01
File_02
File_03
3
✽ The display can be switched between the single
elapsed time and the single remaining time by pressing
the DISPLAY button.
✽ To change the DivX file
Press the STOP button, then use the 5 and ∞ cursor
buttons to reselect the desired DivX file.
✽ To return to the initial disc information screen
Press the STOP button, use the 5 cursor button to
select “ Up..” at the upper left of the screen, then
press the ENTER button.
The screen in step 1 reappears.
File_04
JPEG Preview
File_05
Remote control unit
ENTER
Remote control unit
Main unit
Remote control unit
NOTES:
• DN-V210/DN-V310 are compatible with files recorded in the DivX format. However, DN-V210/DN-V310 are not
guaranteed to playback all videos recorded in DivX format.
• It may not be possible to play some CD-Rs/RWs discs due to disc properties, dirt, warping, etc.
• When writing DivX files on CD-R/RW discs, set the writing program to store the files in the “ISO9660 level 1, level 2 or
Joliet” format. The physical format of the CD to Mode1, Mode2, or XA Form1.
• With the DN-V210/DN-V310 it is possible to display folder names and file names on the screen like titles. The DN-V210/
DN-V310 can display up to 15 characters, consisting of numbers, capital letters, and the “_” (underscore) mark.
• Total number of folders is less than 999, and the total number of files is less than 727.
• Be sure to give DivX files the extensions “AVI” and “DivX” files. Files with then extensions on with no extensions
cannot be viewd on the DN-V210/DN-V310.
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive gets on the
surface of a disc, the disc may get stuck inside the DN-V210/DN-V310 and be impossible to eject.
• Some DivX files protected by copyright require the DVD video player registration code to be played back. To find the
registration code, select DivX in the setup menu. (See page 37.)
64
■ MP3/WMA/DivX files and JPEG files are displayed in the file menu. Both file menus are displayed if the CD
contains a mix of MP3/WMA/DivX files and JPEG files.
File Menu
001_1
If you want to display only the MP3/WMA/DivX or JPEG files,
select “View Filter” at the top right as shown below.
Audio : Display MP3 and WMA
Photo : Display JPEG
Video : Display MPEG/DivX
To perform filter settings, line up the cursor to “View Filter”
and press ENTER. When the filter menu appears, select the
required item from Audio/Photo/Video using the 5 cursors and
∞ press ENTER.
After selecting, press the 2 cursor to return to the file menu.
When initializing the settings, select all of the items.
Edit Mode
: ON
002_2
Browser View
002_3
Clear Program
003_1
003_2
004_1
005_1
005_2
W : 1452 H : 995
: MP3/WMA files are displayed.
: MPEG/DivX files are displayed.
: JPEG files are displayed.
Filter Menu
✔ Audio files
✔ Photo files
✽ For CDDA, the file menu is displayed. CDs that contain a mix
of CDDA tracks, MP3/WMA/DivX and MPEG files cannot be
used.
✔ Video files
Audio files
✔ Photo files
✔ Video files
65
ENGLISH
File Menu Functions
ENGLISH
¤0 ADVANCED FUNCTION
KEY LOCK
■ Operation of the buttons on the front panel (aside from the POWER button) is disabled to prevent accidental
operation.
1
1
1
Press the SHIFT and PLAY buttons simultaneously for 3
seconds.
The KEY LOCK indicator lights (green) and the KEY LOCK
mode is turned on.
• When the KEY LOCK mode is turned on, the KEY
LOCK indicator flashes (green) if one of the buttons
on the front panel (aside from the POWER button) is
operated.
• To turn the KEY LOCK mode off, press the SHIFT and
PLAY buttons again simultaneously for 3 seconds.
KEY LOCK indicator
Main unit
IR REMOTE LOCK
■ Operation of the buttons on the remote controller is disabled to prevent accidental operation.
1
1
66
Press the SHIFT and STILL/PAUSE buttons simultaneously
for 3 seconds.
The IR REMOTE LOCK indicator lights (green) and the IR
REMOTE LOCK mode is turned on.
• When the IR REMOTE LOCK mode is turned on, the IR
REMOTE LOCK indicator flashes (green) if one of the
buttons on the remote controller is operated.
• To turn the IR REMOTE LOCK mode off, press the
SHIFT and STILL/PAUSE buttons again simultaneously
for 3 seconds.
1
IR REMOTE LOCK indicator
Main unit
HIDE OSD
1
1
ENGLISH
■ Switch the OSD and the display of the icons that appear on the screen on and off.
1 HIDE OSD indicator
Press the SHIFT and STOP buttons simultaneously for 3
seconds.
The HIDE OSD indicator lights (green), the HIDE OSD
mode is turned on, and the OSD as well as the letters
and icons displayed when buttons are operated are not
displayed.
• To turn the HIDE OSD mode off, press the SHIFT and
STOP buttons again simultaneously for 3 seconds.
✽ Operating the SETUP menu is not possible when HIDE
OSD is set to ON.
Main unit
67
ENGLISH
Change the Image on the DVD Player Wallpaper
■ The image on the DVD player wallpaper can be changed at the user’s discretion.
RC-963
1
1 3 4 4
4
TOP MENU
/PBC
MENU
2
ENTER
ANGLE
RETURN
DISPLAY STOP STILL/PAUSE
PLAY
3
SLOW/SEARCH
SKIP
SETUP NTSC/PAL ZOOM SLIDE SHOW
1
Load the CD-R/RW on which the JPEG file for wallpaper
have been written into the DN-V210/DN-V310.
• When the disc is loaded in the DN-V210/DN-V310, the
disc information screen appears.
Folder_01
View Filter
Folder _02
Repeat
: Off
Folder_03
Mode
: Normal
File_01
File_02
File_03
File_04
• If there are multiple folders proceed to step 2.
• If there are no folders on the disc, proceed to step 3.
Use the 5 and ∞ cursor buttons to select the folder
containing the file(s) you want to play, then press the
ENTER button.
2
✽ To change the folder
Use the 5 and ∞ cursor buttons to select “ Up..” at
the upper of the screen, then press the ENTER button.
The another folders reappear in the disc information
screen. Select the desired folder.
Folder_01
View Filter
Folder_02
Repeat
: Off
Folder_03
Mode
: Normal
File_01
Remote control unit
File_02
File_03
File_04
File_05
ENTER
Remote control unit
68
JPEG Preview
File_05
JPEG Preview
3
UP. . .
ENGLISH
Select the JPEG file to be set as the wallpaper and play
it.
Use the 5 and ∞ cursor buttons on the remote control
unit to select the still picture file from which you want
to start the slide show, then press the PLAY button or
ENTER button on the remote control unit.
• The slide show starts.
• Only the still picture files in the selected folder are
played.
View Filter
File_01
Repeat
: Off
File_02
Mode
: Normal
File_03
File_04
File_05
File_06
File_07
W : 1452 H : 995
Remote control unit
ENTER
✽ Once all the still picture files in the folder have been
played, the disc information screen reappears.
Remote control unit
4
Main unit
Remote control unit
When the JPEG file which you want to change is
displayed, press the STILL/PAUSE button. The slide show
temporarily stops.
Main unit
5
Press the SHIFT, STILL/PAUSE and PLAY buttons
simultaneously for 3 seconds.
The DVD’s wallpaper switches to the selected JPEG file.
✽ The data for the previously set wallpaper is deleted
from the DVD player’s memory.
✽ Please contact a dealer if you wish to set the wallpaper
back to a DENON Professional original wallpaper.
✽ Do not switch the main unit power Off while switching
the Wallpaper.
Main unit
69
ENGLISH
Serial Remote Control (DN-V310 only)
■ Commands can be sent to the DVD player and the
status requested and sent to the host via RS-232C.
This DVD player can be controlled by a PC. Connect the
player and a serial port on the PC with a 9-pin RS-232C
straight cable. To control this DVD player by a PC, set the RS232C switch on the rear panel to RS-232C.
■ RS-232C Pin assignments (DVD player)
■ Basic format
• Command format
[group, command, parameter list]\r
• Response code format
0 : No error
x : Error code x
Example 1:
Player receives : [PC, RC, 66]\r
Player sends : [PC, RC, 0]\r
When the external controller receives the response this
implies that the player has verified the received message
(syntax), and the command will be executed.
Example 2:
Player receives : [PC, PlayT, 16]\r
Player sends : [PC, PlayT, 2]\r
Pin no.
Signal
1
-
2
TXD
3
RXD
4
-
5
GND
6
-
7
CTS
8
RTS
9
-
■ Communication conditions
Configure the serial port of the PC as shown below.
70
Bit Rate
9,600 bps
Data length
8 bits
Parity
none
Stop bit
1 bit
Flow control
None
If an internal error occurs and the command cannot
be executed, an error message (Error code 2 : Invalid
parameter) will be send.
• Interval time
When transmitting commands consecutively, put more
than 300 ms blank between commands.
■ System commands
Communication between a DVD controller and the DVD
player consist of 3 different types of information:
• External control commands
• External control status
• Asynchronous responses
The messages between the DVD and the DVD controller
look like:
“[group, command, parameter list]\r”
A group, command and parameter-list between squarebrackets, followed by a carriage return character (\r).
The parameter-list exists of comma separated parameters,
and are case sensitive.
When the player receives a message from the external
controller, it will be acknowledged. This acknowledgment
will be done in 2 different ways.
For external control commands, the acknowledgment will
look like:
• Group
: group specified in the received message
(PC)
• Command
: command specified in the received
message
• Parameter-list : ReturnValue
■ Hand shake flow chart
• Control command and Status command
DN-V310
ENGLISH
ReturnValue can have one of the following values
0 : No error
x : Error code x
• Response command
PC
DN-V310
PC
Control command
OK
Asynchronous
response
Control Status
Answer data
■ Error Codes
Name
Code
Description
ecEXT_ERR_OK
0
No error
ecEXT_ERR_UNKNOWN
1
Cause of error not known
ecEXT_ERR_INVALID_PARA
2
Invalid parameter
ecEXT_ERR_INV_CMD
5
Command not valid
ecEXT_ERR_INVALID_NA_DISC_ERROR
10
Command not valid for current disc
■ Command list
• External control commands
Group
Command
RC
PC
Parameter
Remote control command
RC code
see RC codes
PlayT
Play title
Title/Track Number
0~99
PlayC
Play Chapter
Title Number
/Chapter Number
title : 1~99
chp : 1~99
Time
Time Search
Time Search
h
m
s
Set audio stream
AudioStreamNumber
1~8
SetAST
: 0~6
: 0~59
: 0~59
Set sub-picture stream
SubPictureStreamNumber
0~32
OSD
ON/OFF control for OSD
Mode
ON/OFF
LKC
ON/OFF control for KEY
LOCK mode
Mode
ON/OFF
RCC
ON/OFF control for IR
REMOTE LOCK mode
Mode
ON/OFF
SetSPST
For TITLE, CHAPTER, TRACK and COUNTER, number data follows the command.
Example:
• [PC, PlayC, 1, 3] PLAY TITLE 1, CHAPTER 3
• [PC, Time, 0, 3, 15]
PLAY 0h3min15sec
71
■ External control status
ENGLISH
Group
Command
Player status
ReturnValue, Status
see Status codes
Disc type
ReturnValue, Disc Type
see DiscType codes
GetAST
Current audio stream
ReturnValue,
AudioStreamNumber
1~8
GetSPST
Current sub-picture stream
ReturnValue,
SubPictureStreamNumber
0~32
GetT
Current title
ReturnValue,
Title/Track Number
0~99
GetC
Current chapter
ReturnValue,
Titlle Number,
Chapter Number
title : 1~99
chp : 1~999
GetStatus
GetDiscType
PC
Parameter
Status codes
0:Error, 1:Opened, 2:No Disc, 3:Stopped, 4:Playing, 5:Paused
Disc Type codes 0:No Disc, 1:DVD, 2:VCD, 3:CD-DA, 4:MP3, 5:WMA, 6:DivX, 7:JPEG
■ Asynchronous responses
Group
PC
Command
EOT
End of title
ReturnValue,
Title/Track Number
0~99
SOC
Start of a Chapter
ReturnValue,
Title Number,
Chapter Number
title : 1~99
chp : 1~999
EOC
End of a chapter
ReturnValue,
Title Number,
Chapter Number
title : 1~99
chp : 1~999
Execution of a command
Return Value,
Return Status
see Status codes
Error notification
Return Value, Error code
see Error codes
Set resolution
Return Value,
HDMI Resolution
0~4
Status
Change
Error
Set REZ
Set REZ codes
72
Parameter
0:OFF, 1:480 p/576 p, 2:720 p, 3:1080 i, 4:AUTO
Keys/Functions
RC codes
(decimal)
0
CURSOR UP
88
1
CURSOR DOWN
89
Digit 2
2
CURSOR LEFT
90
Digit 3
3
CURSOR RIGHT
91
Digit 4
4
ENTER
92
Digit 5
5
MENU
113
Digit 6
6
SETUP
130
Digit 7
7
RETURN
131
Digit 8
8
ANGLE
133
Digit 9
9
+10
180
DVD POWER
12
CLEAR
181
RANDOM
28
CALL
182
REPEAT
29
NTSC/PAL
183
SLOW/SEARCH (+)
40
SLIDE SHOW
184
SLOW/SEARCH (–)
41
DISPLAY
200
PLAY
44
ZOOM
247
PAUSE
48
STOP
49
Keys/Functions
RC codes
(decimal)
Digit 0
Digit 1
A-B REPEAT
59
OPEN/CLOSE
66
SUBTITLE
75
AUDIO
78
TOP MENU/PBC
84
ENGLISH
■ RC (Remote control) codes
73
ENGLISH
¤1 TROUBLESHOOTING
Check again before assuming the player is malfunctioning.
■ Are all the connections correct?
■ Are you following the instructions in the manual?
■ Are the amplifier and speakers operating properly?
If the DN-V210/DN-V310 does not seem to be functioning properly, check the table below. If this does not solve the problem,
the DN-V210/DN-V310 may be damaged. Turn off the power, unplug the power cord from the power outlet, and contact your
store of purchase or nearest sales office.
Symptom
Page
Power does not turn on.
• Plug the power cord securely into the power outlet.
Playback does not start when PLAY
button is pressed.
Playback stops immediately.
• Is there condensation on the disc or player? (Let stand for 1 or 2 hours.)
• Discs other than DVDs, video CDs and music CDs and Digital picture (JPEG)
cannot be played.
• Disc is dirty. Wipe off the dirt.
Picture does not appear.
• Check the connections.
• Set the TV’s input to “video”.
Sound is not produced or sound quality
is poor.
• Check the connections.
• Properly set the input of the TV, stereo, etc.
• Check the “DIGITAL OUT” and “COMPRESSION” settings.
Menu playback is not possible.
• Check the “AUTO PLAY” setting.
• Menu playback is not possible with anything but video CDs with playback
control.
30
39
• Some disturbance is normal.
—
Buttons do not operate.
• Some operations are disabled for some discs.
• Check the “KEY LOCK” mode.
39
66
No subtitles are displayed.
• Subtitles are not displayed for DVDs not containing subtitles.
• Subtitles are turned off. Turn the subtitles setting on.
—
29
• The audio (or subtitle) language does not switch for discs which do not include
multiple audio (or subtitle) languages.
• For some discs the audio (or subtitle) language cannot be switched when the
operation to switch it is performed, but can be switched on the menu screens.
—
Audio (or subtitle) language does not
switch.
Angle does not switch.
• The angle cannot be switched for DVDs which do not contain multiple angles.
In some cases multiple angles are only recorded for specific scenes.
53
• Check the “RATING” setting.
34
• Use the procedure described below to set the initial settings back to the
values set when the unit was shipped from the factory. Input “8888” at 5
under step 3 on page 34.
—
• The disc does not play with the selected audio or subtitle language if that
audio or subtitle language is not included on that DVD.
29
• Set the “TV ASPECT” default setting to the proper setting for the connected
TV.
24
• Check the default setting for the disc language’s menu language.
30
• Check whether the Video output is set to HDMI.
• Check that the DVD and TV HDMI connectors are connected.
• Check that the TV supports 480p/576p/720p/1080i.
23
13
23
Picture is disturbed during the search
operation.
Playback does not start when the title is
selected.
The password for rating level has been
forgotten.
The disc is not played with the audio
or subtitle language set as the default
setting.
Picture is not displayed in 4:3 (or 16:9).
Menu screen messages for the desired
language do not display.
HDMI does not output.
74
Check
6~11
—
3, 4
5
6~11
—
6~11
—
9, 10, 26, 27
54
Signal system:
Applicable discs:
S-Video output:
Video output:
Component output:
RGB output:
HDMI output:
Audio output:
NTSC/PAL
(1) DVD discs
1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided
discs (1 layer per side)
1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs
(1 layer per side)
(2) Compact discs (CD-DA, Video CD)
12 cm discs, 8 cm discs
Y output level: 1 Vp-p (75 Ω/ohms) C output level: 0.3 Vp-p
Output connector: S connector, 1 set
Output level: 1 Vp-p (75 Ω/ohms)
Output connectors: Pin-plug jack, 1 set / AV 1, 1 set (Europe model only)
Y output level: 1 Vp-p (75 Ω/ohms)
PB/CB output level: 0.7 Vp-p (75 Ω/ohms) PR/CR output level: 0.7 Vp-p (75 Ω/ohms)
Output connector: Pin jack, 1 set
Output level: 0.7 Vp-p (75 Ω/ohms)
Output connector: AV 1, 1 set (Europe model only)
480 p / 576 p, 720 p, 1080 i
Output level: 2 Vrms
2 channel (FL, FR) output connector: Pin jacks, 1 set / AV 1, 1 set (Europe model only)
Audio output
properties:
(1) Frequency response
q DVDs (linear PCM) : 4 Hz to 22 kHz (48 kHz sampling)
: 4 Hz to 44 kHz (96 kHz sampling)
w CDs
: 4 Hz to 20 kHz
(2) S/N ratio
q DVDs
: 110 dB
w CDs
: 110 dB
(3) Total harmonic distortion
q DVDs
: 0.006%
w CDs
: 0.004%
(4) Dynamic range
q DVDs
: 100 dB
w CDs
: 95 dB
Digital audio output: Optical digital output
: Optical connector, 1 set
Coaxial digital output
: Pin Jack, 1 set
Power supply:
AC 230 V, 50 Hz (Europe) / AC 120 V, 60 Hz (USA)
Power consumption: 15 W
Maximum external
dimensions:
434 (width) × 80 (height) × 360 (depth) mm (17-3/32” × 3-5/32” × 14-11/64”)
Mass:
(including protruding parts)
3.9 kg (9 lbs)
■ Remote control unit: RC-963
Type:
Infrared pulse
Power supply:
DC 3 V, 2 R03/AAA batteries
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
✽ Design and specifications are subject to change without notice in the course of product improvement.
75
ENGLISH
¤2 MAIN SPECIFICATIONS
D&M Holdings Inc.
PROFESSIONAL BUSINESS COMPANY
TOKYO, JAPAN
http://www.dm-pro.jp
05/2007
Printed in China
00M47AZ851020
ecmf-d