Pyle PLD193T Owner's Manual

PLD193T

OWNER'S MANUAL

Mobile Video System

Anti Theft Flip Down Detachable Panel

AM/FM Digital Pll Tuning Radio

Car DVD/VCD/CD/MP3 Player/TV Tuner

Auxiliary Input Function

Parental Control

Remote Control

www.pyleaudio.com

CONTENTS

Safety Information.......................................................................................

2

Disc Notes ..................................................................................................

3

Installation ..................................................................................................

4

Electric Connection ....................................................................................

7

Remote Control ..........................................................................................

8

Basic Operation ........................................................................................

10

MP3/WMA/JPEG Disc Play .....................................................................

14

AUX Operation .......................................................................................

14

On-Screen Display Function ...................................................................

15

Multi-Audio Language Function ...............................................................

16

Multi-Subtitle Language Function ............................................................

16

Multi-Angle Function .............................................................................

16

Title Menu Function ...............................................................................

16

TV Operation .......................................................................................

16

Setup .........................................................................................................

17

General Setup ........................................................................................

17

Speaker Setup .......................................................................................

19

Dolby Digital Setup ................................................................................

19

Preferences Setup .................................................................................

20

Defaults Table ........................................................................................

21

Specifications ...........................................................................................

22

Trouble Shooting ......................................................................................

23

1

SAFETY INFORMATION

CAUTION:

THIS DVD PLAYER IS A CLASS I LASER PRODUCT. HOWEVER THIS DVD

PLAYER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE .

HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE SURE TO OPERATE

THE DVD PLAYER CORRECTLY AS INSTRUCTED.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.DO NOT OPEN COVERS AND DO NOT

REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING

INTERFERENCE, USE ONLY THE RECOMMENDED ACCESSORIES.

THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.Use of this copyright protection technology must be authorized by Macro vision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

REGION MANAGEMENT INFORMATION:

This DVD Player is designed and manufactured to respond to the Region

Management Information that is recorded on a DVD disc. If the Region number described on the DVD disc does not correspond to the Region number of this

DVD Player, this DVD Player cannot play this disc.

2

DISC NOTES

Disc formats supported by this player

V I D E O

MP

CD-RW

3

DVD

12 cm disc

(Single-sided disc only)

Video CD

12 cm disc

CD

12 cm disc

MP3

12 cm disc

Discs which cannot be played with this player

DVD-ROM

DVD-R/DVD-RAM

CDV

CD-G

Handling and Cleaning

Dirt, dust, scratches and warping disc will cause misoperation.

Do not place stickers or make scratches on discs.

Do not warp discs.

A disc should always be kept in its case when not in use to prevent from damaging.

Do not place discs in the following places:

1.Direct sunlight

2.Dirty, dusty and damp areas

3.Near car heaters

4.On the seats or dashboard

Disc Cleaning

Use a dry soft cloth to wipe the surface.

If the disc is quite dirty, use a soft cloth slightly moistured with isopropyl (rubbing) alcohol. Never use solvents such as benzine, thinner or conventional record cleaners as they may mar the surface of the disc.

Note:

A disc may become somewhat scratched

(although not enough to make it

3 unusable) depending on your handle it and conditions in the usage environment.

Note these scratches are not an indication of any problem with the player.

Label side up

Do not bend

Wipe the disc from center toward the outside edge

Do not touch the underside of the disc

Preparing New Discs with

Spots

Rough

A new disc may have rough edges on its inside and outside edges.If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc.Therefore, remove the r o u g h e d g e s i n a d v a n c e by using a ball point pen or pencil as shown on the right.To r e m o v e t h e rough edges, press the s i d e o f t h e pen or pencil against the inside and outside edges of the disc.

Rough spots on outside edge

Rough spots on inside edge

Ball point pen or pencil

INSTALLATION

NOTES:

Choose the mounting location where the unit will not interfere with the normal driving function of the driver.

Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly.

Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.

Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle.

passenger if there is a sudden stop, like an emergency stop.

If installation angle exceeds 30 from horizontal, the unit might not give its optimum performance.

30

Avoid installing the unit where it would be subject to high temperature, such as from direct sunlight, or from hot air, from the heater, or where it would be subject to dust, dirt or excessive vibration.

DIN FRONT/REAR-MOUNT

This unit can be properly installed either from "Front"(conventional DIN

Front-mount) or "Rear"(DIN Rear-mount installation, utilizing threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation methods.

4

INSTALLATION

HEX NUT

SPRING WASHER

PLAIN WASHER

TAPPING SCREW

DASH BOARD

METAL MOUNTING

STRAP

CONSOLE

SLIDE BRACKET

HOUSING

HEX BOLT

KEY PLATE

PLASTIC TRIM OUT

KEY PLATE

1.WHILE INSTALLING THE FRONT PANEL, PLEASE MOUNT THE LEFT SIDE FIRST,

AND MAKE THE DIRECTION HOLE ON THE FRONT PANEL AIM AT THE LEFT GUIDE

ON THE UNIT

2.THAN PUSH THE RIGHT SIDE TO MOUNT THE RIGHT GUIDE

3.PUSH IT TO INSTALL THE

FRONT PANEL COMPLETELY .

5

INSTALLATION

CAUTION: DO NOT INSTALL THE DETACHABLE PANEL BEFORE

CONNECTING THE WIRE.

1. The unit is designed for negative terminal of the battery which is connected to the vehicle metal. Please confirm it before installation.

2. If the car interior is extremely hot, as after being parked in the sun, do not use the player until the car has been driven for a while to cool off the interior.

3. Press the OPEN button to flip down the front panel (see fig.1), Slide the guide knob to remove the right side first, then take away the front panel. (see fig.2) and put it in the protective case (see fig.3) for safe keeping.

4. Install the front panel back into its bracket and then push it back to the position for playing (see fig.4).

FRONT PANEL

GUIDE KNOB

OPEN BUTTON

(FIG.1)

PROTECTIVE CASE

(FIG.2)

FRONT PANEL

(FIG.3)

6

FRONT PANEL

(FIG.4)

ELECTRIC CONNECTION

WIRING CONNECTION

MAIN UNIT

TV ANT IN

ANTENNA CONNECTOR

IGNITION

SWITCH(B+)

RED

MEMORY

BACK-UP(B+)

YELLOW

CHOKE

BOX

GROUND(B-)

BLACK

AUTO

ANTENNA

BLUE

FUSE

AUX(optional)

RCA CABLE

VIDEO IN YELLOW

RCH IN RED

LCH IN WHITE

GREY SUBWOOFER

VIDEO OUT 2 YELLOW

COAXIAL OUT BROWN

RCH RED

REAR RCA OUTPUT

CABLE (optional)

FRONT RCA OUTPUT

CABLE

LCH WHITE

FRONT RCA RED R

VIDEO OUT 1 YELLOW

FRONT RCA WHITE L

(FOR RCA LINE OUT VERSION ONLY)

FRONT

Lch SPK.

WHITE

WHITE/BLACK

GREY

GREY/BLACK

FRONT

Rch SPK.

REAR

Lch SPK.

GREEN

VIOLET

GREEN/BLACK VIOLET/BLACK

REAR

Rch SPK.

7

REMOTE CONTROL

16

15

14

23

12

6

8

4

20

21

7

25

3

17

1

2

18

5

19

22

9

10

11

24

13

26

1. CLK

2. MODE

3. STOP

4. SETUP

5. MO/ST(AUDIO)

6. SUBTITLE

LO/DX

7. REPEAT

8. GOTO

9.

/

10. SEL

11. VOL+/VOL-

12.

/ / /

13.MENU

SUB WOOFER

14.BAND(OSD)

15.POWER

16.PLAY/PAUSE

17.MUTE

18.TITLE/PBC

(A/P)

19.SLOW

20.ANGLE

21.EQ

22. SEARCH

23.ENTER

24.SKIP

25. 0 - 9

26.+10

Press it to change the display to clock display.

Press it button on the select TV ,DISC,RADIO AUX IN mode.

Press it to stop playback.

Display the SETUP menu.

In radio mode,press it to select STEREO or MONO (IN disc mode, press it to changing of the AUDIO soundtrack on multi-audio soundtrack DVD disc. Changing of the sound mode of the

VCD/CD disc)

Changing of the SUBTITLE language on multi-subtitle language

DVD disc. In radio mode,.Press this button for distance reception when you are located at weak signal location, depress it for stronger signal.

Switch the Repeat mode of DVD/VCD/CD/MP3 disc.

Disc search button, cooperatively used with numeric buttons

Press to skip to the next track & press to skip back one track.

(In DVD mode , press continually twice to skip back one track.)

Press it to change audio mode through volume ,bass,treble balance and fader modes.

Press it to adjust volume level

Cursor buttons in MENU mode. Note: For models without built-in

FM Modulator, the / buttons can be used for volume up/down control. In TV mode, press / to fine tune. Press the / to select channel upward and downward..

Press it to display the root menu of the DVD disc/Press and hold for more than 2 seconds can have sub woofer, press it again for more than 2 seconds to release this mode.

Display statistical disc information during playback (To change the band in radio stations)

Press it to turn on the unit ,press it again to turn off.

Press once to pause a play, press again to resume playback.

Press it to mute down sound.

Display the TITLE menu that is stored in DVD disc changing between PBC ON and PBC OFF on the VCD disc.(Auto store and preset scan function in radio stations .)

Changing for slow forward/reverse playback motion

Changing of the view angle on multi-angle DVD disc.

Press it to turn to equalization function

In TV mode, Press it to search TV channel automatically.

In DISC mode, Press it to start forward rapidly.

Confirm the Track/Chapter selected with the number key or selected with the cursor buttons on TV screen.

In TV mode, press it to ADD and DELETE channel .

In DISC mode,press it to reverse rapidly

Numeric buttons.

Tens digit select button, cooperatively used with numeric buttons.

8

REMOTE CONTROL

Preparing the Remote Control

Inserting the Batteries

1.First push to inside as the direction indicated by the arrow (See

1

)And then

Remove the battery holder as the direction indicated by the arrow (See

2

).

2.Replace the battery Set a new battery property with (+)side up as illustrated

(See

3

).

3.Insert the battery holder. Push in the holder to the original position(See

4

).

Using the Remote Control

Face the remote control towards the player front face IR mark (remote control signal receiver).

Operation angle: About 30 degree in each the direction of the front of the IR mark.

To prevent damage to the unit, be sure to follow the connection diagram

(page 7).

9

BASIC OPERATION

5 1

17 13 15 2

22 18 4 12 16 14 3 6 7 8 9 10 11

20 21

19

EJ

1.OPEN BUTTON

Press it to flip down the front panel then you can insert the cd disc into the cd compartment. and you can find the EJ button , press it to eject the disc .

2-3.VOL+/VOL- & SEL BUTTON

Press it repeatedly to change audio mode through volume, bass, treble, balance, and fader modes. Rotate VOL + /VOL- knob to adjust the selected mode.

(The corresponding value will show on the display.)

When mode has not been adjusted for several seconds, display returns to normal radio or CD display.

VOL BAS TRE BAL FAD

A.Volume:

Adjust volume level by using VOL + / VOL - knob..

Note: The unit is initially set to volume mode.

B.Bass:

Press SEL button one time. Adjust bass level by using VOL + / VOL knob.

C.Treble:

Press SEL button two times. Adjust treble level by using VOL + / VOL knob.

D.Balance:

Press SEL button three times. Adjust sound balance between left and right speakers by using VOL + / VOL - knob.

E.Fader:

Press SEL button four times. Adjust sound balance between front and rear speakers by using VOL + / VOL - knob.

10

BASIC OPERATION

4.BAND BUTTON

In RADIO mode, press the BAND button on the front panel or on the remote control to select your desired radio band and word which band is selected will be displayed on LCD. Press it to change the bands as below :

FM MW LW FM MW FM AM

For 3 Bands (Europe) For 2 Bands (Europe) For 2 Bands (USA)

5.EQ BUTTON

Press it to turn to equalization function and to select desired audio mode.

There are four kinds of mode as below:

JAZZ CLAS POP ROCK

6-7-8-9-10-11.PRESET STATION

A.To memorize the current frequency, press any one of the six preset buttons[1-6] on the front panel or on the remote controller hold for more than 2 seconds.

B.To recall the preset memory, press one of the preset buttons [1-6].

C.Press

1/TOP

button to select the first track/chapter to play.

a.In the state of VCD/CD/MP3 disc playing, press the button on the front panel to select the first track/chapter to play.(depend on the disc used for VCD) b.In the state of DVD disc playing, the 1TOP button is not available.

D.Long press

2/RPT

button to select repeat mode as follow.

VCD/CD:

REP-ONE REP-ALL

DVD:

CHAPTER REPEAT ON TITLE REPEAT ON

REPEAT OFF a.Continuously repeat at the current chapter/track, when selected

REP-ONE mode.

b.Select REP-ALL mode to continuously repeat all chapter/track on the current disc.

c.REPEAT feature does not support VCD2.0 (with PBC ON).

E.Long press

3/INT

button to scan disc.

a.In the state of CD disc playing, press the 3/INT button on the front panel to play the previous 6 seconds part of each track/chapter on disc.

b.In the state of DVD/MP3 disc playing, the 3/INT button is not available.

c.In the state of VCD disc playing , long press the 3/INT button, the screen will display as follow (long press it again will release this mode.):

SELECT DIGEST TYPE:

TRACK DIGEST

DISC INTERVAL

TRACK INTERVAL

11

BASIC OPERATION

1). You can use the

/ / / buttons on the remote control to select the item, and then press the ENTER button to confirm .

2).

In Track Digest OR Disc/Track Interval MODE.

You can use the

/ / / buttons to select the items ,and then press the

ENTER to confirm .

You can also select the items using the corresponding number buttons, and then press the ENTER to confirm .

d.In the state of DVD disc playing , long press the 3/INT button, the screen will display as follow (long press it again will release this mode.):

SELECT DIGEST TYPE:

TITLE DIGEST

CHAPTER DIGEST

TITLE INTERVAL

CHAPTER INTERVAL

1). you can use the

/ / / buttons on the remote control to select the item, and then press the ENTER button to confirm .

2).

In Title/Chapter Digest OR

You can use the

/ / /

Title/Chapter Interval MODE.

buttons to select the items ,and then press the

ENTER to confirm .

You can also select the items using the corresponding number buttons, and then press the ENTER to confirm .

F. Long press

4/RDM

to play disc in random.

In the DVD/VCD/CDdisc playing, press the 4/RDM button on the front panel to play in random (depend on the disc used for VCD).

12.AS/PS BUTTON

When shortly pressing the APS button on the front panel or the A/P button on the remote controller, the radio searches for each preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for few seconds with releasing mute, and then searches again.

In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing the

APS or A/P button (more than 1 second), the radio searches from the current frequency and checks the signal strength level until 1 cycle search is finished.

And then 6 strongest stations are preset to the corresponding preset number.

The AS operation is implemented in the each band of selected band. When the

AS operation is finished, the radio executes the preset scan.

13.MU BUTTON

Press it to mute down sound. Press it again to release this mode and recover previous volume level.

14.CLK BUTTON

Press it to change the display to clock display. Press it again to return to previous display. In clock display, press and hold for about 2 seconds until the hour display flashes. Rotate VOL+/- button to adjust hours ,press CLK button to flash minute then Rotate VOL+/- button to adjust minutes.

12

BASIC OPERATION

15.PWR BUTTON

Press it to turn on the unit. Press it again to turn off.

16.

BUTTON

Pressing press during playback will stop play temporary. Return to normal playback, once again.

17.

/ BUTTONS

A.When long Pressing the / button (more than 2 seconds ) during play.The

speed of rapid forward/reverse changes according to the disc as follow.

DVD/VCD/CD/MP3:

Normal Playback 2x 4x 8x 16x

B.Shortly press the / button during playback to skip to next track or back one track.(Note: In DVD mode, press continually the button twice to skip to back one track.)

Note:For some VCD 2.0 dics (PBC-playback control), and buttons may be unavailable.

C.Press UP or DN button on the remote controller or / on the fornt panel to manually tune up or down for your desired station. Press them hold for more than 2 seconds to automatically tune up or down for the stronger station.

18.MOD BUTTON

Press it repeatedly select TV, DISC ,AUX IN , RADIO mode.

19.EJECT BUTTON

In CDP playing ,Press the eject button to eject the disc form the disc slot.

20.FLASHING LED

If the front panel is not on the main unit, LED will be flashing.

21.RESET BUTTON

RESET button is placed on the housing and must be activated with either a ballpoint pen or thin metal object. The RESET button is to be activated for the following reasons:

A. Initial installation of the unit when all wiring is completed.

B. All the function buttons do not operate.

C. Error symbol on the display.

Note:If press RESET button , the unit can't work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.

22.ST BUTTON

Press ST button to select stereo or mono reception for radio stations.

13

BASIC OPERATION

MP3/WMA/JPEG DISC PLAY

1.When inserting an MP3/WMA/JPEG disc

Ex: When Mp3 file is detected.

3

2

1

003/112

Mp3

Mp3

Mp3

00:56 new ton

....... .......

4

K P woman 1

5 6

04:07

Repeat one

1

2

5

6

3

4

.Current track(file)(highlighted bar)

.Current track (file) number/total number of tracks(files) in the current folder.

.Elapsed playing time of the current track( not available for JPEG disc)

.total playing time.

( not available for

JPEG disc)

.Selected playback mode

.Operation mode icon.

(Play),

(stop), (pause), (forward)

(reverse).

In stop mode , use / / / on the remote control to select the item or folder, then press ENTER button to confirm.

Pressing REPEAT button repeatedly can select two kinds of repeat play mode.

2. REP-ONE:

Play the same song over and over again.

3. REP-ALL:

Play all songs in the discover and over again.

In the playback, use or to skip an item ahead or back.

In the playback, when long pressing the than2 seconds ) or short press

/

/ button on the front panel (more on the remote control to rapid forward/ reverse.

AUX OPERATION

When the unit connect external A/V , you can press MODE to switch the AUX input mode.

14

BASIC OPERATION

ON-SCREEN DISPLAY FUNCTION

Press the

OSD

button during playback to display the contents of the current disc on the screen.

Example :

1. DVD:

A.Press

OSD

for the first time:

2.Example for VCD/SVCD/CD:

A.Press

OSD

for the first time:

SINGLE ELAPSED

TRACK 01/16 00:49

TITLE ELAPSED

TT 01/01 CH 01/38 0:02:06

B.Press

OSD

for the second time:

Title Number, Total Title Number,

Chapter Number, Total Chapter Number of this Title of the disc currently being played will be shown on the screen, along with the elapsed time.

B.Press

OSD

for the second time:

SINGLE REMAIN

TRACK 01/16

C.Press

OSD

for the third time:

TOTAL ELAPSED

TRACK 01/16

02:45

00:60

TITLE REMAIN

TT 01/01 CH 01/38 3:24:36

D.Press

OSD

for the fourth time:

C.Press

OSD

for the third time:

CHAPTER ELAPSED

TT 01/01 CH 01/38 0:02:56

TOTAL REMAIN

TRACK 01/16 78:46

D.Press

OSD

for the fourth time:

CHAPTER REMAIN

TT 01/01 CH 01/38 0:04:32

E.Press

OSD

for the fifth time:

The message on the screen will be cleared.

E.Press

OSD

for the fifth time:

The message on the screen will be cleared for SVCD and VCD.

NOTE:

For CD and MP3,the message will always display on the screen.

3.Example for MP3:

Each time

OSD

is pressed, the message displayed on screen changes as follows:

SINGLE ELAPSED SINGLE REMAIN

15

BASIC OPERATION

Multi-audio Language Function

For DVD:

Press

AUDIO

during playback.

Each time the button is pressed, number of the audio soundtrack language changes on sequential order.

NOTES:

- The language number is different according to the disc.

- Some disc only contain one language soundtrack

- When no different language soundtrack are recorded will be display at screen left top corner.

For VCD/CD:

Press

AUDIO

during playback. It is possible to switch the sound between monaural and stereo sound.

MONO LEFT MONO RIGHT

STEREO

MIX-MONO

- When no different subtitle language are recorded, will be displayed at screen left top corner.

Multi-angle Function

(for DVD Only)

Press ANGLE during playback. Each time the button is pressed, number of the angle changes in sequential order.

Notes:

- The angle number is different according to the disc.

- The function only work for disc having scenes recorded at different angles.

- When no different angle are recorded, will be displayed at screen left top corner.

Title Menu Function

For DVD:

If the DVD has multiple titles recorded on the disc. It can select preferred title from the title menu to start playback.

- Press

TITLE

during playback.The title menu is display.

- Press the cursor button shown in TV screen, select preferred title by the cursor button and confirmed by

ENTER key.

For VCD:

Press

TITLE/PBC

button on the remote control while the disc is playing, you can switch between "PBC on"and "PBC off" mode.

Multi-subtitle Language

(for DVD Only)

Function

Press

SUBTITLE

during playback.

Each time the button is pressed, number of the subtitle language changes in sequential order.

-

Notes:

The language number is different according to the disc.

- Some discs only contain one subtitle language.

16

TV Operation

Switching to TV mode

1.Connect the TV antenna to the TV.IN

(from Ant) jack on the back of the unit.

2. Press the mode button on the remote control to select the TV mode.

Auto searching TV channels

Press the SEARCH button on the remote controller to star search channel automatically.

Selecting channel

- Press the / button to choose the channel upward and downward.

- The numeric button (0-9) allow you to select the corresponding channel directly.

Note:

In TV mode, the +10 button is not available.

Fine TV channel

You can press / button on the remote controller to fine TV channel. It can be improve the picture quality .

Channel ADD/DEL

In TV mode ,after search channel automatically, when you want delete the no sign channel, press the SKIP button (the screen display SKIP),the channel will be deleted. Also, you can press numeric button to select channel, then press SKIP to add channel(the screen display SAVE).

SETUP

GENERAL SETUP

--- GENERAL PAGE ---

DOLBY

DOLBY

-----General setup page----

TV Display LB

Angle Mark

OSD Lang

Spdif Output

ON

ENG

SPDIF/RAW

ON

Captions

Screen Saver

Last Memory

ON

ON

Go To General Setup Page

1. Press

SETUP

control .

button on the remote

2.The SETUP menu is displayed.

3.Select the preferred item by using the

/ / / buttons

4.Press ENTER button.

a.GENERAL SETUP

This setup page includes the item of TV display & audio output feature.

The detail please refer to

GENERAL SETUP MENU.

b.SPEAKER SETUP

This is to activate the audio output from DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Please refer to

SPEAKER SETUP MENU.

c.DOLBY DIGITAL SETUP

Please refer to

DOLBY DIGITAL

SETUP.

d.PREFERENCE SETUP

This setup page includes all the configuration of support feature.

The detail please refer to

PREFERENCES SETUP MENU.

17


TV Display Normal/PS

Angle Mark

Normal/LB

Wide

OSD Lang

Spdif Output

Captions

Screen Saver

Last Memory

Video

Material

4:3

Set TV Display Mode

TV Screen

Normal

Pan Scan

Letter-box

Wide(16:9)

1.TV DISPLAY SETUP

This is to select the appropriate TV aspect (4:3 or 16:9) according to the connected TV set.

Normal/PS (For 4:3 TV)

Played back in the PAN & SCAN style.

(If connected to wide-screen TV, the left and right edges are cut off.)

Normal/LB (For 4:3 TV)

Played back in letterbox style.

(If connected to wide-screen TV, black bands appear at top and bottom of the screen.)

Wide (For 16:9 TV)

Select when a wide-screen TV set is connected.

SETUP

DOLBY


TV Display

Angle Mark

OSD Lang

Spdif Output

ON

OFF

Captions

Screen Saver

Last Memory

Set Angle Mark

2.

ANGLE MARK DISPLAY SETUP

If it is set to ON, when the multi-angle

DVD disc is playing, (the angle mark) will appears on the screen; if is set to OFF, the mark will not appear.

DOLBY


TV Display

Angle Mark

English

OSD Lang

French

Spdif Output

German

Captions

Spanish

Screen Saver

Italian

Last Memory

Portuguese

Set OSD Language

3

.OSD LANG TYPE SETUP

Select the preferred OSD language by using the / buttons.

DOLBY


TV Display

Angle Mark

Osd Lang

Spdif Output

SPDIF OFF

SPDIF/RAW

SPDIF/PCM

Captions

Screen Saver

Last Memory

Setup SPDIF

4.SPDIF OUTPUT

This is to activate the audio output from SPDIF OFF mode to SPDIF/RAW mode to SPDIF/PCM mode.

DOLBY


TV Display

Angle Mark

OSD Lang

Spdif Output

Captions

Screen Saver

Last Memory

Closed Caption

ON

OFF

5.CAPTIONS SETUP

Activate the CAPTIONS feature by selecting ON. And release this feature by selecting OFF.

18

SETUP

DOLBY


TV Display

Angle Mark

OSDLang

Spdif Output

Captions

Screen Saver

Last Memory

Screen Saver

ON

OFF

6.SCR SAVER SETUP

Select the SCR SAVER output

ON/OFF.

DOLBY


TV Display

Angle Mark

OSD Lang

Spdif Output

Captions

Screen Saver

Last Memory

ON

OFF

Set Last Memory State

7.LAST MEMORY SETUP

Select the LAST MEMORY output

ON/OFF.

SPEAKER SETUP

--- SPEAKER SETUP PAGE ---

DOLBY

-----Speaker Setup Page----

DOWNMIX

LT/RT

STEREO

Set Downmix Mode

This is to activate the audio output from

DOLBY AC3 5.1 DOWNMIX to 2 channel mode. Select the preferred SPEAKER connection by using the cursor buttons.

Select the LT/RT to activate the Dolby surround compatible output.

Select the STEREO to activate simple stereo mode.

DOLBY DIGITAL SETUP

DOLBY

-----Dolby Digital Setup----

FULL

DYNAMIC

6/8

4/8

2/8

OFF

19

Set DRC OFF

DYNAMIC RANGE CONTROL

Select DRC and adjust the dynamic range of a Doby Digital encoded program. There are 8 steps between full compression and off compression.

SETUP

PREFERENCES SETUP

--- PREFERENCES PAGE ---

DOLBY

DOLBY

-----Preference Page----

TV Type PAL

Audio

Subtitle

Disc Menu

AUTO

NTSC

Parental

Password

Default

Set TV standard

1.TV TYPE SETUP

This player can play discs recorded in either PAL or NTSC format.Select

NTSC format, when you connected to

NTSC TV.Select PAL format, when you connected to PAL TV.Select AUTO format, the player TV output format will according to the DVD disc format..

DOLBY


TV Type

Audio

Subtitle

Disc Menu

Parental

Password

Default

English

French

Spanish

German

Italian

Portuguese

OFF

Preferred Subtitle Language

3.SUBTITLE LANGUAGE SETUP

Select the preferred SUBTITLE language by using the cursor buttons.

DOLBY


TV Type

English

Audio

French

Subtitle

Spanish

Disc Menu

German

Parental

Italian

Password

Portuguese

Default

Preferred Audio Language

2.AUDIO LANGUAGE SETUP

Select the preferred AUDIO soundtrack by using the cursor buttons.


TV Type

Audio

Subtitle

Disc Menu

Parental

Password

Default

English

French

Spanish

German

Italian

Portuguese

Preferred Menu Language

4.DISC MENU LANGUAGE SETUP

Select the preferred DISC MENU language by using the cursor buttons.

20

SETUP

DOLBY

DOLBY


TV Type

1KID SAF

Audio

2G

3PG

Subtitle

Disc Menu

4PG13

5PGR

Parental

6R

Password

7NC 17

Default

8 ADULT

OFF

Set Parental Control

5.PARENTAL

Select suitable parental guidance by the cursor buttons and conformed by pressing ENTER button.

DOLBY


TV Type

Audio

Subtitle

Disc Menu

Parental

Password

Default

RESET

Load Fcatory Setting

7.DEFAULTS

Select reset to become factory initial setting.

DEFAULTS TABLE


TV Type

Audio

Subtitle

Disc Menu

Parental

Password

Default

CHANGE

Change Password

6.PASSWORD

Select the change and press ENTER button. Type the old password (The initial factory code is

1379

) and key in 4 characters password now you want to use, and retype again to confirm key in correctly.

21

TV DISPLAY

NORMAL/LB

ANGLE MARK ON

GENERAL SETUP

OSD LANGUAGE

SPDIF OUPUT

ENGLISH

SPDIF/RAM

CAPTIONS ON

SCR SAVER

LAST MEMORY

SPEAKER SETUP

DOLBY DIGITAL

DOWNMIX

DYNAMIC

TV TYPE

AUDIO

PREFERENCES

SUBTITLE

DISC MENU

PARENTAL

PASSWORD

ON

ON

STEREO

OFF

AUTO

ENGLISH

OFF

ENGLISH

8 ADULT

1379

SPECIFICATION

GENERAL

Supply Voltage

Current Consumption

SIGNAL SYSTEM

DISCS PLAYED

:12v Dc (11v-15v)

:

More Then 10 A

:Compositive Video 1.0vp-p 75

AUDIO SIGNAL OUTPUT

CHARACTERISTICS

(1)Dvd-video Disc

5"(12 Cm) Single-sided, Single-layer

5"(12 Cm) Single-sided, Double-layer

(2)Compact Disc (cd-da, Video Cd)

5"(12cm) Disc

:

2ch&4ch Line Out

(1)Frequency Response 20 Hz - 20 Khz

(2)S/n Ratio 90 Db (jis)

(3)Wow And Flutter

Below Measurable Limits

RADIO

FM TUNER SECTION

Tuning Range

IF Range

Usable sensitivity(30dB)

AM TUNER SECTION

Frequency Range

IF Range

Usable sensitivity(30dB)

:87.5-107.9MHz

:10.7MHz

:15dB

:530-1710KHz

:450KHz

:45dB

TV TUNER

TV System

TV Sensitivity

:NTSC or PAL

:

NOTE:

Specifications and design are subject to modification, without notice, due to improvements in technology.

22

TROUBLE SHOOTING

Before going through the check list, check wiring connection. If any of the problems persist after check list has been made, consult your nearest service dealer.

SYMPTOM

NO POWER

CAUSE

The car ignition switch is not on

The fuse is blown

Presence of disc inside the player.

DISC CANNOT

BE LOADED

OR EJECTED

Inserting the disc in reverse direction

The disc is extremely dirty or defective

Temperature inside the car is too high

Condensation

SOLUTION

If the power supply is properly connected to the car accessory terminal,switch the ignition key to "ACC"

Replace the fuse

Remove the disc in the player, then put a new one

Insert the compact disc with the label facing upward

Clean the disc or try to play a new one

Cool off or until the ambient temperature return to normal

Leave the player off for an hour then try again

Adjust volume to a desired level

NO SOUND

SOUND SKIPS

Volume is in minimum

Wiring is not properly connected

The installation angle is more than 30 degrees

The disc is extremely dirty or defective disc

THE OPERA-

TION KEYS

DO NOT WORK

The built-in microcomputer is not operating properly due to noise

THE RADIO

DOES NOT

WORK

The antenna cable is not connected

The signals are too weak

Check wiring connection

Adjust the installation angle less than 30 degrees

Clean the compact disc, then try to play a new one

Press the RESET button.

Front panel is not properly fixed into its place

Insert the antenna cable firmly

Select a station manually

888-J9080-04

23

No results