K-LINE K109TC E N

Add to my manuals
2 Pages

advertisement

K-LINE K109TC E N | Manualzz
CONVERTERS AND INTERFACES
K-LINE
K109TC
Temperature converters
K-LINE
Thermocouple Converter
► INPUT: Thermocouples types: J, K, E, N, S, R, B, T with zero
and span configurable by dip-switch
► OUTPUT: N.1 channel current 0/4..20, 20..4/0 mA or
voltage 0..5/10, 10..0, 1..5 Vdc
N.1 solid state relè (SSR) for thermostat / alarm function
► Galvanic isolation at 3-way
► Spring-cage terminal block and/or DIN bus connection
system
► Power bridging terminal - DIN rail bus connector
► Tiny dimensions (102,5 x 93,1 x 6,2 mm)
► Resolution @ 14 bit
► Precision class 0.1%
TECHNICAL DATA
K109PT– –
K109TC
Thermocouple
PT100 converter
Converter
ORDER CODES
K109TC
Thermocouple converter
Accessories
K-BUS
Expandable power supply connector
K-SUPPLY
Power Supply module with surge protection
GENERAL FEATURES
Power supply
Channels
19,2…30 Vdc
Design
N.1
Terminal housing for mounting on 35 mm DIN 46277
Filter rejection
50-60 Hz (settable)
Accuracy
Class: 0,1%
Cold junction error: 1,5°C Max
DIP Switch
- Inputs signal setup
- Output signal setup
Status indicators
- Fault
- State of the auxiliary output
Processing
Floating point 32 bit
Dimensions
6,2 x 93,1 x 102,5 mm (w x h x d)
Galvanic Isolation
Power supply // input // output at 1500 Vac, digital
Weight
50 g
Hot swapping
Yes
Operating temperature
-20..+65 °C
Power consumption
500 mW
Connections
Plug-in screw clamp terminal blocks, wires up to 2.5 mm2
A/D Converter
14 bit
IP Protection
IP 20
Current output protection
Approximately 25 mA
Standards
EN50081-2
EN50082-2
EN61010-1
EN60742
Approvals
CE
Security output
- 102.5% of full scale value, in case of over-range
- 105% of full scale value in case of improper functioning
Humidity
30..90% a +40°C (not condensing)
INPUT
OUTPUT
Thermocouples types: J, K, E, N, S, R, B, T
Tables:EN60584-1 (ITS-90)
Lower span: 100 °C
Impedance: 10 MOhm
Current: 0..20 mA, 4..20 mA, 20..0 mA e 20..4 mA
Higher load resistance: 500 Ohm
Voltage: 0..5 Vdc, 1..5 Vdc, 0..10 Vdc and 10..0 Vdc
Lower load resistance: 2 KOhm
Static output: Applicable Voltage 24 Vac nominal
Current: 60 mA Max
DIMENSIONS AND INSTALLATION
Inserting / Extracting module on DIN guide
Power supply
Expandable connector K-BUS
Input
Cage clamp connection
Output

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement