cover_front.fm Page 0 Friday, September 7, 2007 7:36 PM
Motorola D810 series
Digital Cordless Phone with
Answering Machine
Warning
Use only rechargeable batteries.
Charge the handset for 24 hours before use.
EN
D811_IFU_EN.fm Page 2 Friday, September 7, 2007 7:37 PM
EN
Welcome...
EN
to your new Motorola D811 Digital Cordless Phone!
• Wall mountable freedom base – all handsets fully cordless for
locating anywhere within range.
• 1.4” colour display.
• 250 Name and number phonebook.
• Copy phonebook entries between other handsets or your
mobile phone SIM card.
• Screensaver clock display.
• Answering machine with 12 minutes digital recording time.
• Send and receive text messages.1
• Caller Display shows you who’s calling and see details of the
last 30 callers in a Calls list. 2
• Register up to 5 handsets to a single base and register each
handset with up to 4 different bases.
• Make internal calls, transfer external calls, hold 3-way conversation between two internal callers and an external caller.
1.
You must subscribe to your network provider’s Caller Display
and SMS Messaging Services for text messaging to work and
you must not withhold your telephone number. The Telkom
Caller Services required are IdentiCall and Home SMS. Ring
10219 for further information. Some network providers lines
May not be compatiblewith this text messaging service.
2.
You must subscribe to your network provider’s Caller Display
service for this feature to work. The Telkom Caller Service
required is IdentiCall.
Please note that this equipment is not designed for making
emergency telephone calls when the power fails. Alternative
arrangements should be made for access to emergency.
Alternatively, you may find the answer in the ‘Help’ section at
the back of this guide.
This User Guide provides you with all the information
you need to get the most from your phone.
Before you make your first call you will need to set up your phone.
Follow the simple instructions in ‘Getting Started’, on the next few pages.
IMPORTANT
Only use the telephone line cord supplied.
This equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be
made for access to emergency services.
Got everything?
•
•
•
•
2
D811 handset & charger
D811 base
Quick start guide
2 x AAA NiMH rechargeable batteries
•
•
•
•
Mains power adaptor for the base
Mains power adaptor for the charger
Telephone line cord
Wall mounting screws and wall plugs
If you have purchased a D811 multiple pack you will also
have the following additional items:
• D811 handset & charger
• 2 x AAA NiMH rechargeable batteries
Mains power adaptor for the charger
1. Getting started 4
Location 4
Setting up 4
Connecting up the large base 4
Connecting the handset and charger 4
Setting up your D811 4
Set date and time manually 5
2. Getting to know your phone 5
Overview of your handset 5
Handset Display 5
Display icons 6
Overview of the base 6
Navigating the menus 6
Menu map 7
Character map 8
3. Using the phone 8
Switch the handset on / off 8
Make a call 8
Preparatory dialling 8
End a call 8
Receive a call 8
Adjust the earpiece/receiver volume 8
Secrecy 8
Call another handset 8
Transfer a call 8
3-way conference call 8
Make a handsfree call 9
Answer a call in handsfree 9
Redial a number from the redial lists 9
Save a number from the redial list to the phonebook 9
Delete a redial number/delete all redial 9
To lock the keypad 9
Paging/Find handset 9
Store a name and number 9
View an entry 9
Dial an entry 9
Edit a name and number 9
Edit ringtone 10
Delete an entry 10
Delete entire phonebook 10
Copy an entry to another handset 10
Copy the entire phonebook to another handset 10
Memory status 10
Copy an entry to a SIM card 10
Copy all entries to or from a SIM card 10
Change the dialling code 10
4. Handset settings 11
Handset ringtone 11
Handset ringer volume 11
Receiver volume 11
Handset name 11
5.
6.
7.
8.
9.
10.
11.
Display language 11
Wallpaper 11
Menu colour 11
Screensaver 11
Light timeout 11
Display contrast 11
Auto talk 11
Key beep 11
PABX access code 12
Base settings 12
Base ringtone 12
Base ringer volume 12
Dialling mode 12
Ring priority 12
Recall mode 12
First ring 12
System PIN 12
Restore default settings 13
ECO mode 13
Clock & alarm 13
Date & time 13
Set alarm 13
Alarm on /off 13
Switch off alarm ring 13
Time format 13
Agenda 14
Add a new event 14
Switch off agenda ring 14
Show agenda details 14
Edit agenda 14
Send agenda as a text message 14
Delete agenda 14
Delete all agendas 14
Calls lists 14
Caller Display 14
Calls lists 14
New calls alert 14
View new missed calls 14
View and dial from a Calls list 15
Copy a Calls list number to the phonebook 15
Send a text message to a Calls list number 15
Delete an entry 15
Delete all entries 15
Call Waiting 15
Voicemail 15
Answering machine 16
Base control keys 16
Switch the answering machine on / off 16
Answer delay 16
Switch message alert tone on / off 16
12.
13.
14.
15.
16.
On-screen alert 16
Record your own outgoing message 16
Outgoing message language 16
Check or delete your outgoing message 17
Select outgoing message mode 17
Record a memo 17
Call screening 17
Message playback 17
Delete all old messages 17
Switch remote access On or Off. 17
Change the remote access PIN 17
Switch your answering machine on remotely 18
Play messages 18
Text messaging 18
Subscribe to the text messaging service 18
Send a text message 18
Standard text entry 19
Receiving and reading text messages 19
Read a new message 19
Read, forward, delete, view and save numbers of texts
in the Inbox 19
Edit or send texts in the Drafts box 19
Forward or delete texts in the Outbox 19
Edit templates 20
Deleting texts 20
Add or change Service Centre numbers 20
Set send centre 20
Message alert tone 20
Set message size 20
Add a user mailbox 20
Open and read a mailbox text 20
Edit a user mailbox 21
Delete a user mailbox 21
Set common mailbox sub address 21
Using additional handsets 21
Registering an additional handset 21
Select a base 21
De-register a handset 22
Help 22
General information 23
Safety information 23
Cleaning 23
Environmental 23
Product disposal instructions 23
Warranty Information 23
Declaration of Conformance 24
Inserting a pause 24
Recall 24
Wall mounting 24
3
EN
D811_IFU_EN.fm Page 3 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 4 Friday, September 7, 2007 7:37 PM
1. Getting started
Connecting up the large base
WARNING
4. After 24 hours, plug the telephone line cord from the large
base into the telephone wall socket.
BATTERY LOW WARNING
Do not place your D811 in the bathroom or other humid areas.
If the
icon flashes in the display, you will need to recharge
the handset before you can use it again.
Location
During charging, the
You need to place your D811 base within 2 metres of the mains
power socket and telephone socket so that the cables will
reach.
icon will scroll in the display.
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give about 10
hours talk time or 100 hours standby time on a single charge.
Make sure it is at least 1 metre away from other electrical
appliances to avoid interference. Your D811 works by sending
radio signals between the handset and base. The strength of
the signal depends on where you site the base. Putting it as
high as possible ensures the best signal.
Note that new batteries do not reach full capacity until they
have been in normal use for several days.
To keep your batteries in the bes t condition, leave the handset
off the base for a few hours at a time.
To wall mount your D811 base, see “Wall mounting” on
page 24.
Running the batteries right down at least once a week will help
them last as long as possible.
HANDSET RANGE
The charge capacity of rechargeable batteries will reduce with
time as they wear out, giving the handset less talk/standby
time. Eventually they will need to be replaced.
The D811 has a range of 300 metres outdoors when there is a
clear line of sight between the base and handset. Any
obstruction between the base and handset will reduce the
range significantly. With the base indoors and handset either
indoors or outdoors, the range will normally be up to 50 metres.
Thick stone walls can severely affect the range.
Plug the large mains power cable into the socket marked
on the underside of the base and plug the other end into the
mains power wall socket and switch the power on.
Connecting the handset and charger
After charging your handset for the first time, subsequent
charging time is about 6–8 hours a day. Batteries and handset
may become warm during charging. This is normal.
SIGNAL STRENGTH
If you have purchased a multiple pack, this process will need to
be carried out for all handsets and chargers:
Setting up your D811
The
icon on your handset indicates when you are in range.
When out of range of the base, the screen shows Searching… the
flashes and the handset gives an out-of-range warning
tone every minute. This tone is repeated until you move back
into range.
1. Plug the small mains power cable into the socket marked
on the underside of the charger.
If you are on a call, the line will hang up. Move back within in
range. The handset will automatically re-connect to the base.
Setting up
The base station must be plugged into the mains power at all
times. Do not connect the telephone line cord into the wall
socket until the handset is fully charged. Only use the power
and telephone cables supplied with the product.
The power adaptor with a clear connector is for the base unit
and the power adaptor with a red colour connector is for the
charger unit.
4
1. The Welcome screen will briefly appear, then a list of
countries is displayed.
2. Scroll
or
to your country (operator) and press Select .
The handset and base will reset to load the correct settings.
The standby screen is then displayed and your phone is
ready to use
You can still make and receive calls without first selecting your
country and network operator, however the Welcome screen
will re-appear until you have configured your phone country
Settings unless it has already been setup by the supplier.
IMPORTANT
WHICH POWER ADAPTOR?
Welcome screen
2. Insert the 2 x AAA NiMH batteries supplied into the
handset. Then slide the compartment cover into place.
3. Place the handset on the charger to charge for at least 24
hours. When the handset is fully charged the
icon will
indicate that it is fully charged.
Date and time
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically for all handsets
when you receive your first call.
The date and time is recorded with each answering machine
Getting started
message you receive.
If you do not have a Caller Display service you can set the date
and time manually.
2. Getting to know your phone
Overview of your handset
Set date and time manually
1. Press Menu and scroll u or d to Clock & Alarm then press
Select.
2. Date & Time is highlighted. Press Select .
3. Enter the date using the format DD/MM/YY e.g. 09 06 07
for 9th June 2007. Enter the time in 12 or 24 hour time
format. Press Save . To change the Time Format see
page 13.
4. Press > or Back until you return to standby.
Your D811 is now ready for use.
M
I
J
K
L
A Earpiece
B Display
See page 6 for an overview of the display icons.
C Option button (left)
Press to open the Menu.
Press to select options displayed on screen.
D Option button (right)
In standby, press to open the phonebook menu, page 9.
Getting to know your phone
Press to select options displayed on screen.
E Redial/ Up
In standby, press to open and scroll through the Redial list,
page 9.
In talk mode, press to adjust volume.
In menu mode, press to scroll through the options.
When storing an entry in the phonebook, press and hold to
enter a Pause, page 24.
F Talk/ Handsfree
In standby mode, press to make and receive calls, page 8.
In talk mode, press to switch handsfree on and off, page 8.
G End call/ Power on/off
Press to end a call, page 8.
In menu mode, press to return to standby.
In standby, press and hold to switch the handset off. When off,
press to switch the handset back on.
H Phonebook/ Down
In standby, press to open and scroll through the Names list,
page 9.
In talk mode, press to adjust volume.
In menu mode, press to scroll through the options.
I
*
Press and hold to switch between Tone and Pulse dialling,
page 12
J #/ Lock
Press and hold to lock the keypad, page 9.
To unlock, select Unlock and follow the on screen instructions.
K Int (Intercom)
Used for internal calls, page 22.
L R (Recall)
For use with switchboard/PBX.
M Wired Headset Socket
Please use 2 pin headset with 2.5mm connector.
Handset Display
Range
indicator
Flashes
when out of
range or not
registered
Battery
status
Scrolls when
charging
Handset
name/
number
5
EN
D811_IFU_EN.fm Page 5 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 6 Friday, September 7, 2007 7:37 PM
Battery is fully charged.
Charger
When recording incoming/
outgoing messages and memo
Displays "r"
During volume adjustment
Displays "0" - "9" or "H" for
highest volume
When answer machine is OFF
with no activity
Displays "-"
* For this feature to work you must subscribe to your network
provider’s Caller Display service. A quarterly fee may be
payable.
On startup
Flash between "C" and
message number if the time
has not been set
NOTE
B Answering machine On/Off
C Delete
D Skip Backwards/Replay
E Play/Pause
F Skip Forward
G Stop
H Volume Down
I
Volume Up
J Paging Key
In standby, press to ring the handset(s), page 9.
Press and hold to enter registration mode when registering
handsets, page 21.
K SIM card slot
Insert your mobile phone SIM card here to copy to and from the
phonebook.
For more information on these control keys, see page 16
Battery is partially charged.
Battery is running low.
Battery is almost fully discharged (Red).
When the memory for TAM, SMS or voicemail messages is full,
a white line will appear below their corresponding reminder
icon.
Overview of the base
Display icons
Displayed in standby mode to indicate handset is in
range of the base.
Flashes if you move out of range.
Displayed if ECO Mode is switched on
Handset ringer volume is Off.
Navigating the menus
Displayed in handsfree talk mode.
Your D811 has an easy to use menu system.
Each menu has a list of options, which you can see on the
menu map on the following page.
Answering machine is On.
An alarm is set.
When the handset is switched on and in standby:
The keypad is locked.
You have voicemail messages.*
A LED Indicator
Indicates when the answering machine is on or off, and how
many messages you have.
When answer machine is ON
Displays the number of
messages
You have missed calls.*
When memory is full and answer Alternates between "F" and
machine is ON
message number
You have answering machine messages.
You have SMS text messages.*
The approximate power levels of your battery are indicated as
below:
6
During Remote Access of the
answer machine
Displays "A"
1. Press Menu to open the main menu.
2. Then u use d or buttons to scroll through the available
options.
3. Press the Select option button to select a menu option or the
Back option button to go back to the previous screen.
To return to the previous menu level, press Back .
To exit the menu and return to standby, press >.
If no buttons are pressed for 30 seconds, the handset returns
to standby automatically.
Getting to know your phone
D811_IFU_EN.fm Page 7 Friday, September 7, 2007 7:37 PM
Text
Messaging
Answer
Machine
Calls Lists
Agenda
Clock & Alarm
Settings
Registration
Names
Press Names
during a call:
Write Message
Play
Missed Calls
Set Handset
Register Handset
Play All
Received Calls
Alarm
Ringtone
Select Base
From menu in
standby:
Phonebook list
is displayed.
Drafts
Answer On/Off
Dialled Calls
If there is an Event,
the following
options will be
displayed.
Date & Time
Inbox
Time Format
Ringer Volume
De-register
Search
Select OPTIONS:
Outbox
Templates
Delete Messages
Text Settings
Record Memo
Outgoing Message
Delete Messages
Answer Settings
Delete Calls
Add Event*
Show Details
Edit Event
Send as a Text
Delete Event
Delete All Events
Receiver Volume
Handset Name
Language
Wallpaper
Menu Colour
Screensaver
Light Timeout
Display Contrast
Auto Talk
Key Beep
*If there is already an event on the list, "Event" is displayed.
Otherwise, "Add Event" is displayed.
PABX Access
Code
Add Entry
Add Entry
Copy Phonebook
Show Details
Dialling Codes
Edit Entry
Memory Status
Delete Entry
EN
Menu map
Delete Phonebook
Press
in
standby:
Phonebook list
is displayed
Select OPTIONS:
Show Details
Send Message
Edit Entry
Copy Entry
Set Base
Ringtone
Ringtone
Delete Entry
Ringer Volume
Dialling Mode (not available RSA)
Ring Priority
Recall Mode
First Ring
System PIN
Master Reset
ECO Mode
Getting to know your phone
7
D811_IFU_EN.fm Page 8 Friday, September 7, 2007 7:37 PM
Character map
Key
Case
Assigned characters and symbols
1
L/U*
.
2
L
a b c 2 ä æ å à ç
U
A B C 2 Ä Æ Å Ç
L
d e f
U
D E F 3 É
L
g h i
4 ì
U
G H I
4
L
j
5
U
J K L 5
L
m n o 6 ö ø ò ñ
U
M N O 6 Ö Ø Ñ
3
4
5
6
7
8
9
,
-
k l
? !
¡
¿ '
@ :
;
/
1
3 è é
L
p q r
U
P Q R S 7
s 7 ß
L
t
U
T U V 8 Ü
L
w x y z 9
U
W X Y Z 9
u v 8 ù ü
0
3. Using the phone
Internal calls
CALL TIMER
Call another handset
Your handset will automatically time the duration of all external
calls. The handset display shows the call duration both during
and for a few seconds after your call.
Switch the handset on / off
1. In standby, press and hold > to switch the handset off.
When off, press > to switch back on.
Make a call
number.
Preparatory dialling
During your call:
1. Dial the number first. If you make a mistake press Clear to
delete the last digit.
2. Press < to dial.
If the number dialled matches an entry in the phonebook, the
name is displayed.
End a call
1. Press >.
Receive a call
You can transfer an external call to another handset registered
to the base.
1. Press I then the handset number (1-5) you want.
2. Press OK to dial or press End to cancel the calls request and
return to the caller.
3. When the other handset answers you can announce the
caller.
4. Press > to complete the transfer or I to switch back and
forth between both callers.
If the other handset does not answer, press End to return to your
original caller.
When you receive an external call, the phone rings. The display
shows External Call and the caller’s number or, if the number
matches an entry stored in the phonebook, the name is
displayed.
3-way conference call
During a call to an external caller:
*
L/U
bring up symbol table
1. Press < to answer the call.
#
L/U
short press to switch between Abc, abc, ABC
and 123 mode
long press to switch between input
Adjust the earpiece/receiver volume
u d
1. During a call, press
or
to increase or decrease the
volume. The display shows the level.
Secrecy
During a call, you can talk to someone nearby without your
caller hearing.
1. During a call, press Secrecy . The display shows Secrecy On
and your caller cannot hear you.
2. Press Off to return to your caller.
8
When an internal call is received, the display shows Internal Call
Handset X (where X is the calling handset) and the handset
Transfer a call
L/U
*L = Lower
U = Upper
1. Press I then the number (1-5) of the handset you want to
call.
2. Press OK to dial.
1. Press <.
2. When you hear the dial tone, dial the number.
If the number dialled matches an entry in the phonebook, the
name is displayed.
0
languages
If you have more than one handset registered to the base, you
can make internal calls between two handsets.
You can hold a 3-way conference call between 2 internal callers
and 1 external caller.
1. Press I then the handset number (1-5) you want.
2. Press OK to dial.
3. When the other handset answers you can announce the
caller.
4. Press Join to begin the conference call. Display shows
Conference Call .
5. Press > to hang up.
Handsfree
Handsfree lets you talk to your caller without holding the
handset. It also enables other people in the room to listen to
your conversation over the loudspeaker.
Using the phone
<
Make a handsfree call
<
<
>
1. Dial the number then press
.
2. Press
again. The
icon is displayed and you hear
your call over the handset loudspeaker.
3. Press
to switch the call between the earpiece and the
loudspeaker.
4. Press
to end the call.
During a handsfree call, press u or d to change the volume.
Paging/Find handset
You can alert a handset user that they are wanted or locate a
missing handset.
Paging calls cannot be answered by a handset.
Answer a call in handsfree
1. Press p on the base. All handsets registered to the base
will ring and display Paging Call.
2. Press p on the base again to stop the ringing or, on any
handset, press Stop or any button on the handset to stop all
handsets ringing.
When the phone rings, press < twice to answer in handsfree
talk mode.
Phonebook
Redial
You can store up to 250 names and numbers in the phonebook.
Names can be up to 12 characters long and numbers up to 24
digits. You can also select different ring tones for phonebook
entries.
The last 20 telephone numbers called are saved to a redial list.
You can then select any of the numbers to redial, delete or copy
to the phonebook.
Redial numbers can be up to 32 digits long.
Redial a number from the redial lists
SEARCH ALPHABETICALLY
Press d
Or
Press Names.
1. Press u the last number you called is displayed.
2. Press u or d to scroll to the number you want.
3. Press < to dial.
Search is highlighted. Press Select.
Save a number from the redial list to
the phonebook
Enter the first letter of the name you want. The first name
beginning with that letter is displayed.
Please see “Copy a Calls list number to the phonebook” on
page 15 for instructions and select the Dialled Calls option.
Delete a redial number/delete all redial
Please see “Delete a redial number/delete all redial” on page 9
for instructions and select the Dialled Calls option.
To lock the keypad
You can lock the keypad so that it cannot be used accidentally
while carrying it around.
IMPORTANT
When the keypad is locked you can still answer incoming calls
and operate the handset as normal. When the call is ended, the
keypad lock comes on again.
1. Press and hold #. The handset beeps and
is
displayed. To unlock the keypad:
2. Press Unlock . Display shows Press # to Unlock Keys.
3. Press #.
Using the phone
The list of entries is displayed.
Scroll d to view any other entries beginning with that letter.
Store a name and number
If you subscribe to a Caller Display Service and want the name
of your caller displayed instead of the number, save the full
telephone number including the dialling code to your
phonebook.
You can store multiple entries with the same name but, to
prevent unnecessary duplicates, you can only store one
number once.
1. From standby, press Names. The phonebook menu is
displayed.
2. Search is highlighted. Scroll d to Add Entry and press Select .
3. Enter the name and press OK.
When storing a name the first character is upper case and the rest
lower case.
To change the case manually, Press #.
To store a Pause in the number field, press and hold u.
To store a Recall in the number field, press R.
4. Enter the number and press Save.
5. Scroll u or d to the ringtone you want and press Select.
The display shows <NAME> Saved and returns to the
phonebook menu.
6. Press Back to return to the previous menu level or > to return
to standby.
ENTERING NAMES
Use the keypad letters to enter names, e.g. to store TOM:
Press 8 once to enter T.
Press 6 three times to enter O.
Press 6 once to enter M.
WRITING TIPS
Press Clear to delete the last character or digit.
Press u or d to move backwards or forwards through
character/digits.
Press # to switch between upper and lower case.
Press 0 to insert a space.
Use 1 for other punctuation characters.
You must enter a name to go with a number.
OPEN THE PHONEBOOK DURING A CALL.
1. During your conversation, press Names.
2. Press Options to select Add Entry, Show Details , Edit Entry or
Delete Entry.
View an entry
1. Press d. The first entry is displayed.
2. Scroll u or d to the entry you want or search
alphabetically.
3. Press Options. The display highlights Show Details.
4. Press Select to display the name, number and ringtone.
5. Press Dial to call the number or Back to return to the
previous level.
Dial an entry
1. In standby, press d. The first entry is displayed.
2. Scroll u or d to the entry you want or search
alphabetically.
3. Press < to dial the displayed number.
Edit a name and number
1.
2.
3.
4.
Press d.
Scroll u or d to the entry you want.
Press Options and scroll d to Edit Entry and press Select.
Press Clear to delete characters, use the keypad to enter
new ones then press OK.
5. Press Clear to delete digits, use the keypad to enter new
ones then press Save.
9
EN
D811_IFU_EN.fm Page 9 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 10 Friday, September 7, 2007 7:37 PM
6. Scroll u or d to the ringtone you want and press Select to
save the entry.
7. Press Back to return to the previous menu level.
Edit ringtone
1.
2.
3.
4.
Press d.
Scroll u or d to the entry you want.
Press Options and scroll d to Ringtone and press Select.
Scroll u or d to the ringtone you want and select Select to
save the entry or select Default Melody.
5. Press Back to return to the previous menu level.
Delete an entry
1.
2.
3.
4.
5.
Press d.
Scroll u or d to the entry you want.
Press Options and scroll d to Delete Entry and press Select.
Press Yes to confirm or No to cancel.
Press Back to return to standby.
Delete entire phonebook
1.
2.
3.
4.
Press Names.
Scroll u or d to Delete Phonebook and press Select.
Press Yes to confirm or No to cancel.
Press Back to return to standby.
Copy an entry to another handset
When you have more than one handset registered to your D811
base, you can copy entries between handsets.
1.
2.
3.
4.
5.
Press d.
Scroll u or d to the entry you want.
Press Options and scroll d to Copy Entry and press Select.
To Handset is displayed. Press Select.
Available handsets are displayed. Scroll u or d to the
handset you want and press Select. Copy Phonebook? is
prompted on the receiving handset. Press Yes to accept or
No to cancel. When completed the sending handset
displays <NAME> Copied.
6. Press Back to return to the previous menu level.
Copy the entire phonebook to another
handset
In just a few minutes, you can copy all your phonebook contacts
to another handset.
At the handset you are copying from:
1. Press Names.
2. Scroll d to Copy Phonebook and press Select.
10
3. To Handset is displayed. Press Select .
4. Available handsets are displayed. Scroll u or d to the
handset you want and press Select. When completed the
display shows the number of entries copied.
5. Press Back to return to the previous menu level.
handset to make a call or try to send a text, the copying process
will stop immediately.
However, if an incoming call is received, the copying process is
cancelled so that the call can be taken.
At the receiving handset:
If the memory becomes full during copying from a SIM, the
display shows Memory Full Not All Copied.
1. The display shows Copy Phonebook? Press Yes to begin
copying or No to cancel.
Most SIM cards are supported, but if the SIM Card format is not
compatible, the display shows SIM Format Not Supported .
Memory status
COPYING FROM A SIM CARD
You can check how much of the phonebook memory is
available.
When copying from a SIM only the first 12 characters of each
name are copied and the first 24 digits in a number are copied.
1. Press Names .
2. Scroll d to Memory Status and press Select.
3. Display shows the number of Memory Used and Memory Free
entries.
4. Press Back to return to the previous menu level.
If an entry with a duplicate number is found, the entry will not be
copied.
Copy an entry to a SIM card
1. Insert the SIM card into the SIM READER slot on the side of
the base.
2. Press d to open the phonebook list then press Options .
3. Scroll d to Copy Entry and press Select .
4. Scroll d to To SIM and press Select .
5. If requested, enter your SIM PIN then press OK.
The PIN number will be displayed as asterisks for security
reasons.
6. Display shows Please wait...X% as it copies entries from the
SIM. When completed the display shows <NAME> Copied.
7. Press Back to return to the previous menu level.
Please Insert SIM Card will be displayed if you have not already
inserted a SIM card into the base.
Change the dialling code
The Dialling Codes function automatically converts SIM entries
beginning with international dialling codes to the local code. For
example, on a SIM card, + is the international code and 44 is
the country code.
These will be replaced automatically by the local code 0 so that
a number beginning +44207 will be converted to 0207.
1. Press Names.
2. Scroll d to Dialling Codes and press Select.
3. Scroll d to the part of the dialling code you need to
change, International , Country or Local and press Select.
4. Enter the new code and press Save .
5. Press Back to return to the previous menu level.
Copy all entries to or from a SIM card
1. Insert the SIM card into the SIM READER slot on the side
of the base.
2. Press Names .
3. Scroll d to Copy Phonebook and press Select.
4. Scroll d to either From SIM or To SIM and press Select.
5. If requested, enter your SIM PIN then press OK.
The PIN number will be displayed as asterisks for security
reasons.
6. Display shows the name of each entry as they are copied.
When completed the display shows the number of entries.
7. Press Back to return to the previous menu level.
COPYING TO A SIM CARD
While copying to and from SIM, if
<
is pressed on any
Using the phone
4. Handset settings
Handset ringtone
You can set different ringtones for external calls and internal
calls.
Select from 10 handset ringtones.
You will hear a sample ring for each one you highlight.
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Ringtone is highlighted. Press Select.
Press u or d to highlight External Call or Internal Call . Press
Save to confirm.
5. Scroll u or d to highlight the ringtone you want.
6. Press Select to confirm.
7. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Handset ringer volume
The handset has 5 ringer volume settings plus Off.
If the volume is set to Off the
icon is displayed.
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Scroll d to Ringer Volume and press Select.
Press u or d to display the volume level you want. Press
Save to confirm.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Receiver volume
This sets the standard volume level for the handset earpiece.
There are 8 levels to choose from.
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Scroll d to Receiver Volume and press Select.
Press u or d to display the volume level you want. Press
Save to confirm.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Handset name
If you are using more than one handset with your D811 base, you can
give each handset a personalised name to easily distinguish between
the handsets.
Handset settings
A name can be up to 10 characters long.
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Scroll d to Handset Name and press Select.
Use the keypad to enter the name and press Save .
Press Back to return to the previous menu level or > to return
to standby.
Display language
The available languages include:
English, Francais, Deutsch, Italiano and Espanol.
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Scroll u to d Language and press Select.
Scroll d or to the language you want and press Select .
Press Back to return to the previous menu level or > to return
to standby.
Wallpaper
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Scroll d to Wallpaper and press Select .
Scroll u or d to the wallpaper you want and press View.
On the preview screen, scroll u or d to see available
wallpapers.
6. Press Use to confirm the wallpaper.
7. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
5.
Menu colour
Press Menu, scroll d to Settings and press Select.
Set Handset is highlighted. Press Select .
Scroll d to Menu Colour and press Select .
Scroll u or d to select the colour you want: blue, orange
or pink and press Select.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Screensaver
1.
2.
3.
4.
5.
6.
Press Menu, scroll d to Settings and press Select .
Set Handset is highlighted. Press Select.
Scroll d to Screensaver and press Select .
Scroll u or d to set the Screensaver to Clock or Off .
Press Select to select Clock .
Press Back to return to the previous menu level or > to return
to standby.
Light timeout
Set how long the backlight stays on after the handset has
returned to standby screen.
Press Menu, scroll d to Settings and press Select .
Set Handset is highlighted. Press Select.
Scroll d to Light Timeout and press Select .
Scroll u or d to set the timeout period you want then
press Select.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Display contrast
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select .
Set Handset is highlighted. Press Select.
Scroll d to Display Contrast and press Select.
Scroll u or d to Low, Medium or High then press Select.
Press Back to return to the previous menu level or > to return
to standby.
Auto talk
If you set Auto Talk to ON, when you receive an incoming call you
can answer it just by lifting your handset from the charger. You do
not need to press <.
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select .
Set Handset is highlighted. Press Select.
Scroll d to Auto Talk and press Select .
Scroll u or d to On or Off then press Select.
Press Back to return to the previous menu level or > to return
to standby.
Key beep
When the screensaver is set to Clock an analogue clock is
displayed.
When you press a button on the D811 handset you hear a
beep. You can switch this on or off.
The screensaver comes on when the screen backlight switches
off in standby mode. To change the backlight timeout setting,
see Light timeout.
1.
2.
3.
4.
Press Menu, scroll d to Settings and press Select .
Set Handset is highlighted. Press Select.
Scroll d to Key Beep and press Select.
Scroll u or d to Off or On then press Select.
11
EN
D811_IFU_EN.fm Page 11 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 12 Friday, September 7, 2007 7:37 PM
5. Press Back to return to the previous menu level or > to return
to standby.
5. Base settings
PABX access code
Base ringtone
If your D811 is connected to a switchboard, you may need to
enter a
one-digit access code in the dialling sequence to be able to
connect to the outside line.
The access code will be displayed at the beginning of a number
on the screen.
The access code will not be used when you dial the number
yourself (rather than for example from the phonebook). This
allows you to make calls to other switchboard extensions.
Press Menu, scroll d to Settings and press Select .
Set Handset is highlighted. Press Select.
Scroll d to PABX Access Code and press Select.
Scroll u or d to On, Off or Set Code then press Select .
If you select Set Code, enter the switchboard access code
e.g. 9 then press Save .
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
If you choose Select Handset all available handsets are
displayed. Scroll u or d to highlight the handset you want
then press Select.
Select from 5 base ringtones.
You will hear a sample ring for each one you highlight.
1.
2.
3.
4.
5.
6.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select .
Ringtone is highlighted. Press Select.
Scroll u or d highlight the ringtone you want.
Press Select to confirm.
Press Back to return to the previous menu level or > to return
to standby.
Base ringer volume
The base has 5 ringer volume settings plus Off.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select .
Scroll d to Ringer Volume and press Select.
Press u or d to display the volume level you want. Press
Select to confirm.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Dialling mode
Your D811 is pre-set to Tone dialling. You should not normally need
to change this setting. The dial mode options are Tone or Pulse.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select .
Scroll d to Dialling Mode and press Select .
Press u or d to highlight Pulse or Tone then press Select to
confirm.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
Ring priority
When you have more than one handset registered to your
base, you can set one handset to ring before the other
handsets. This allows one handset user to answer all incoming
first, like a receptionist.
Choose All Handsets if you want all handsets to ring at the same
time or Select Handset to nominate a handset to ring two times
before the others.
1. Press Menu, scroll d to Settings and press Select.
2. Scroll d to Set Base and press Select .
3. Scroll d to Ring Priority and press Select .
12
4. Press u or d to highlight All Handsets or Select Handset then
press Select.
Scroll u or d to the number of rings you want to set 2, 4
or 6 and press Select.
5. Press Back to return to the previous menu level or > to return
to standby.
Recall mode
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select .
Scroll d to Recall Mode and press Select.
Press u or d to highlight Recall 1 or Recall 2 then press Select to
confirm.
5. Press Back to return to the previous menu level or > to return
to standby.
1.
2.
3.
4.
First ring
If you have subscribed to your network’s Caller Display service, your
D811 does not ring until the caller information has been received
and displayed.
However, if you want your handset to ring without waiting for
the caller information to be displayed, set First Ring to On.
Please note that this will mean the first ring you hear will be the
default ringtone. This will change to any ringtone you have set
once the caller information is displayed.
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select .
Scroll d to First Ring and press Select .
Press u or d to On or Off then press Select to confirm.
Press Back to return to the previous menu level or > to return
to standby.
System PIN
The System PIN is used when changing certain settings and
registration / de-registration. The default setting is 0000. You
can change this to your own preferred number up to 8 digits.
When you enter a PIN the digits are shown as ****.
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select .
Scroll d to System PIN and press Select .
Enter the old PIN (original setting 0000) and press OK.
Enter the new PIN and press OK.
Base settings
6. Re-enter the new PIN and press OK.
7. Press Back to return to the previous menu level or > to return
to standby.
6. Clock & alarm
Restore default settings
If you subscribe to your network’s caller display service, the
base sets the date and time for all handsets whenever a call is
received. You can manually set the time on an individual
handset.
You can restore your D811 to its default (original) settings.
It will not affect the phonebook, calls list or user’s data, including
personal/recorded outgoing messages and answer machine
messages. All handsets registered to the base will be retained.
All text, answer machine, handset and base settings will be reset.
1.
2.
3.
4.
5.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select.
Scroll d to Master Reset and press Select.
Select Yes to confirm or No to cancel.
Enter the system PIN (original setting 0000) then press OK.
The display will show Reset Compete and the unit will restart.
If the welcome mode is available then the user is presented
with the country selection screen. Please refer to welcome
mode section.
ECO mode
To reduce the level of power emissions, you can select low
power or ECO mode. When the ECO mode is set to On, the
base transmission power will be reduced.
To turn ECO Mode to On or Off :
1.
2.
3.
4.
Press Menu, scroll d to Settings and press Select.
Scroll d to Set Base and press Select.
Scroll d to ECO Mode and press Select.
Press u or d to highlight On or Off then press Select to
confirm.
The display will show Set to ON or Set to OFF depending on the
selection together with a confirmation tone.
NOTE
1.
2.
3.
4.
5.
1.
2.
3.
4.
Press Menu, scroll d to Clock & Alarm and press Select .
Scroll d to Time Format and press Select.
Press u or d to select 12 Hour or 24 Hour and press Select.
Press Back to return to the previous menu level.
Press Menu, scroll d to Clock & Alarm and press Select.
Date & Time is highlighted, press Select .
Enter the date using the format DD/MM/YY.
Enter the time and press Save .
Press Back to return to the previous menu level or > to
return to standby.
Set alarm
When the alarm is set, the display shows the
icon.
Each handset can have a different alarm setting.
Press Menu, scroll d to Clock & Alarm and press Select.
Scroll d to Alarm and press Select.
Press u or d to select On and press Select .
Press u or d to select Once, Monday-Friday or On Daily and
press Select.
5. Enter the time you want the alarm and press Save.
6. Press Back to return to the previous menu level or > to
return to standby.
will disappear from the
If the alarm was set to Once, the
screen.
1.
2.
3.
4.
If set to On Daily or Monday-Friday, the
screen.
will remain on the
Alarm on /off
1.
2.
3.
4.
Press Menu, scroll d to Clock & Alarm and press Select.
Scroll d to Alarm and press Select.
Press u or d to select On or Off and press Select.
Press Back to return to the previous menu level.
Switch off alarm ring
icon is displayed in place of the standard
When ECO mode is set to ON, the handset range will be reduced.
Clock & alarm
Set the time format to 12 or 24 hour setting.
Date & time
Once an alarm has been set, you can switch the setting On or
Off.
Signal icon in
ECO mode
When set to ON,
signal icon.
Time format
When the alarm goes off, press Stop.
If you are using the handset to make a call when the alarm ring
is due, the
flashes and you hear a beep in the earpiece.
13
EN
D811_IFU_EN.fm Page 13 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 14 Friday, September 7, 2007 7:37 PM
7. Agenda
Add a new event
Use your D811 to remind you of details of up to five events such
as birthdays, anniversaries or appointments. The entry can be
up to 24 characters long.
Up to 24 characters can be entered as the subject.
1. Press Menu, scroll d to Agenda and press Select .
2. If no previous event is stored, Add Event is highlighted. Press
Select.
Or
If events are already stored, they are listed. Press Options .
Add Event is highlighted. Press Select.
3. Enter the subject and press Save .
4. Enter the date (DD/MM) and press Save.
5. Enter the time (HH:MM) and press Save. If the current time
format setting is 12 hour, select am or pm.
6. Press u or d to select Silent or Alarm and press Select .
If you press Alarm:
Scroll u or d to select Once or Annually and press Select.
If Once is selected, scroll u or d to select when you want
to receive the reminder At event time or 30 min before . Press
Select. Display shows Saved .
If Annually is selected, then the alarm will sound at the
event’s time.
7. Press Back to return to the previous menu level or > to
return to standby.
If you select a silent reminder, the event subject is displayed on
screen but no alarm will sound.
When the event memory is full, the display shows Memory Full .
You must delete an event before you can add a new one.
Switch off agenda ring
1. The event is displayed. Press View to stop the alarm and see
the details of the event. Or press Back to stop the alarm and
return to the standby screen. If no button is pressed, the alarm
stops after one minute.
Show agenda details
1. Press Menu, scroll d to Agenda and press Select .
2. Stored events are displayed. If required, scroll d to the
event you want and press Options.
3. Scroll d to Show Details and press Select . The description,
date and time of the reminder are displayed.
4. Press Back to return to the previous menu level or > to return
to standby.
14
Edit agenda
1. Press Menu, scroll d to Agenda and press Select.
2. Stored events are displayed. If required, scroll d to the
event you want and press Options.
3. Scroll d to Edit Event and press Select.
4. Edit the subject and press Save.
5. Edit the date and time then press Save.
6. Press u or d to select Silent or Alarm and press Select .
If you press Alarm:
Scroll u or d to select Once or Annually and press Select.
If Once is selected, scroll u or d to select when you want
to receive the reminder At event time or 30 min before . Press
Select. Display shows Saved .
If Annually is selected, then the alarm will sound at the
event’s time.
7. Press Back to return to the previous menu level or > to
return to standby.
Send agenda as a text message
1. Press Menu, scroll d to Agenda and press Select .
2. Stored events are displayed. Scroll d to the event you
want and press Options.
3. Scroll d to Send as a Text and press Select.
4. The event is displayed. Press Options to select Send option
and enter a destination key.
Delete agenda
1. Press Menu, scroll d to Agenda and press Select.
2. Stored events are displayed. Scroll d to the event you
want and press Options.
3. Scroll d to Delete Event and press Select.
4. Press Yes to confirm or No to cancel.
5. Press Back to return to the previous menu level or > to return
to standby.
Delete all agendas
1.
2.
3.
4.
5.
Press Menu, scroll d to Agenda and press Select .
Stored events are displayed. Press Options .
Scroll d to Delete All Events and press Select.
Press Yes to confirm or No to cancel.
Press Back to return to the previous menu level or > to return
to standby.
8. Calls lists
IMPORTANT
To use Caller Display you must first subscribe to the service
from your network provider. A quarterly fee may be payable.
To ensure the caller's name is displayed, make sure you have
stored the full telephone number, including the dialling code in
the phonebook.
If the caller’s number is stored in the phonebook, the name
assigned to it is displayed.
If the number is unavailable, Unavailable will be displayed.
If the call is from an international number, International will be
displayed.
If the call is from the operator, Operator will be displayed.
If the call is from a payphone, Payphone will be displayed.
If the call is from a ringback request, Ringback will be displayed.
Caller Display
If you have subscribed to a Caller Display Service, you will be
able to see your caller’s number on your handset display
(provided it is not withheld) prior to answering the call.
If your caller’s name and number are stored in the phonebook
and a name/number match is found, you will see the caller’s
name on the display instead.
Calls lists
Each handset can hold details of up to 30 answered or
unanswered calls and 20 dialled calls.
The caller’s details are stored in a Calls list whether you
answered the call or not. When the list is full, and a new call is
received, the oldest entry will be deleted automatically.
New calls alert
When you have missed calls, the display shows You have X new
missed calls. If you press Back, the screen returns to standby and
the
icon is displayed.
View new missed calls
1. When you see the new calls alert, press View. You can now
scroll u or d through the Missed Calls list.
2. Press Options . Show Details is highlighted. Press Select to see
the number, date and time of the call.
3. Press Back to return to the previous menu level or > to
return to standby.
Agenda
View and dial from a Calls list
1. Press Menu, scroll d to Calls Lists and press Select. Missed
Calls is highlighted. Scroll u or d to choose Missed Calls ,
Received Calls or Dialled Calls .
2. Press Select . You can now scroll u or d through the list.
3. Press Options . Show Details is highlighted.
4. Press Select to see the caller’s number, date and time of
call.
5. Press Dial to call the number.
6. Press Back to return to the previous menu level or > to
return to standby.
Copy a Calls list number to the
phonebook
1. Press Menu, scroll d to Calls Lists then press Select. Missed
Calls is highlighted.
If required, scroll u or d to Received or Dialled Calls then
press Select .
2. Scroll u or d to the entry you want and press Options .
3. Scroll d to Save Number. Press Select.
4. Enter a name then press OK. The number is displayed,
press Save .
If you need to edit the number, use Clear to delete any unwanted
digits, then enter new ones using the keypad.
5. Scroll u or d to the ringtone you want and press Select.
6. Press Back to return to the previous menu level or > to
return to standby.
Delete an entry
1. Press Menu, scroll d to Calls Lists then press Select. Missed
Calls is highlighted.
If required, scroll u or d to Received or Dialled Calls then
press Select.
2. Scroll u or d to the entry you want and press Options.
3. Scroll d to Delete Call. Press Select .
4. Press Back to return to the previous menu level or > to
return to standby.
Delete all entries
You can delete all entries in an individual Calls list or all entries
from all Calls lists.
1. Press Menu, scroll d to Calls List then press Select. Missed
Calls is highlighted.
If required, scroll u or d to Delete Calls press Select.
2. Scroll u or d to highlight Missed Calls, Received Calls, Dialled
Calls or All Calls. Press Select.
3. Press Yes to confirm or No to cancel.
4. Press Back to return to the previous menu level or > to
return to standby.
9. Call Waiting
You must subscribe to your network’s Caller Display service for
Call Waiting to work. A quarterly fee may be payable.
1. During a call, you hear a soft beep in the earpiece and the
display shows the number of the caller or the name if it
matches an entry in your phonebook. If these are not
available, the display shows Call Waiting.
2. Press R to put your current caller on hold and speak to the
new caller.
3. Press R again to switch between both callers (In some
countries, it is required to dial R + 2).
4. Press > to finish the current call or > to end both calls.
10. Voicemail
If you have subscribed to your network operator’s voicemail
messaging service, your handset can inform you when you
receive new voicemail.
If you have new voicemail, You have new voicemail is displayed.
• Press Listen to dial the voicemail number preset on the
handset. If your voicemail number is different to the number
stored in the handset, you can manually dial your preferred
voicemail number.
• Or press Back to listen to your voicemail at a later time. A
reminder icon
will be displayed.
See “Entering names” and “Writing tips” on page 9.
Send a text message to a Calls list
number
1. Press Menu, scroll d to Calls Lists then press Select. Missed
Calls is highlighted.
If required, scroll u or d to Received or Dialled Calls then
press Select .
2. Scroll u or d to the entry you want and press Options .
3. Scroll d to Send Message. Press Select .
4. Write the message then press Options.
5. Send is highlighted. Then press Select. (You can save, insert
a symbol, emoticon or template).
6. The number is pre-entered on the Send to screen, press
Send to send the message.
7. Press Back to return to the previous menu level or > to
return to standby.
See page 18 for more information on text messaging.
Call Waiting
15
EN
D811_IFU_EN.fm Page 15 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 16 Friday, September 7, 2007 7:37 PM
11. Answering machine
For more information on outgoing messages (OGM), see
page 16.
prerecorded outgoing messages to choose from or you can
record your own.
Your D811 can digitally record up to 12 minutes of messages
or up to 59 messages. Each message can last up to a
maximum of 3 minutes. As well as recording incoming
messages, you can record memos for other users.
Switch the answering machine on / off
Record your own outgoing message
You can operate your answering machine from:
• the base.
• the handset.
• remotely, from any other Touchtone™ telephone, see
page 17.
You will need to set the date and time (if you have not already
done so) so that you will know when each message was
received, see page 13. The default day and time setting is
Monday 12.01 pm.
Base control keys
1. Press Menu, scroll d to Answer Machine and press Select.
2. Scroll d to Answer On/Off and press Select.
3. Scroll u or d to highlight On or Off and press Select. When
switched on, the handset display shows
in idle.
This can also be done via the base by pressing o on the base.
Answer delay
Answer delay sets the number of times your D811 will ring
before the answer machine picks up your call and starts playing
the outgoing message.
You can change this setting to between 2–9 rings or Time Saver .
The default setting is 6 rings.
1. Press Menu, scroll d to Answer Machine and press Select.
2. Scroll d to Answer Settings and press Select .
3. Scroll u or d to Answer Delay and press Select.
4. Scroll u or d to the setting you want and press Select.
5. Press Back to return to the previous menu level.
For more information on Time Saver, see “Switch your
answering machine on remotely” on page 18.
o
Press to turn the answering machine on/off
Press and hold to enter the outgoing message (OGM)
selection mode
P
Press to play all stored messages
Press to pause or resume playback
Switch message alert tone on / off
Press to stop message playback
When you have new messages, with the audible message alert
switched on, you will hear an audible alert once at the handset and
the TAM base will beep every 10 seconds. The default setting is
Off.
s
r
Skip to the next message during message playback
Select Answer Only OGM during OGM selection mode.
l
Replay current message
Press twice to skip back to previous message
Select Answer & Record OGM during OGM selection
mode.
x
Delete current message during message playback
Press to delete personal OGM during OGM playback.
The pre-recorded OGM is selected and played.
+
Increase speaker volume during message playback
16
Decrease speaker volume
1.
2.
3.
4.
5.
Press Menu, scroll d to Answer Machine and press Select.
Scroll d to Answer Settings and press Select .
Scroll u or d to Message Alert and press Select.
Scroll u or d to highlight On or Off and press Select.
Press Back to return to previous menu or > key to return to
standby.
On-screen alert
When you have new answering machine messages, the
icon is displayed along with You have X new messages. All new
messages are indicated by a green dot.
1. Press Play . Or, scroll u or d the list of messages. Press
Play to hear the highlighted message.
Outgoing messages
The outgoing message is the message a caller first hears when
the answering machine picks up their call. There are 2
Your D811 comes with two prerecorded outgoing messages,
Answer and Record or Answer Only, but if you wish you can
record your own.
ANSWER AND RECORD
The pre-set Answer and Record outgoing message, that allows
your caller to leave a message, is “Hello, your call cannot be
taken at the moment, so please leave your message after the
tone”.
Your Answer and Record outgoing message can be up to 3
minutes long and will replace the prerecorded message.
ANSWER ONLY
The pre-set Answer Only outgoing message, where callers hear
an announcement but cannot leave a message, is “Hello, your
call cannot be taken at the moment and you cannot leave a
message, so please call later”.
When recording your Answer Only message, remember to
advise your caller that they will not be able to leave a message.
Your Answer Only message can be up to 12 minutes long
(maximum recording length) and will replace the pre-recorded
message.
However, you should try to keep your message short to allow
time for recording memos, or incoming messages when using
Answer and Record mode.
To record your outgoing message:
Press Menu, scroll d to Answer Machine and press Select.
Scroll d to Outgoing Message and press Select .
Record is highlighted, press Select .
Scroll u or d to Answer & Record or Answer Only and press
Select .
5. The display shows Please speak after the tone .
6. After the tone, speak your message clearly into the handset
then press Save or # to end recording.
7. Your outgoing message is played back. If you want to
delete it, press Delete during playback. If you press Save or
wait for the message to play back, it will be saved.
1.
2.
3.
4.
Outgoing message language
Change the language of your pre-set outgoing messages.
1. Press Menu, display shows Answer Machine and press Select .
2. Scroll d to Answer Settings and press Select .
3. Language is displayed, press Select.
Answering machine
4. Scroll u or d to the language you want and press Select
to confirm.
Check or delete your outgoing
message
Deleting a personal outgoing message automatically reinstates
the prerecorded outgoing message.
You cannot delete a pre-recorded message.
Press Menu, scroll d to Answer Machine and press Select.
Scroll d to Outgoing Message and press Select.
Scroll d to Play and press Select.
Scroll u or d to Answer & Record or Answer Only and press
Select.
5. Press d to Personal OGM and press Select.
6. The message is played. Press OK to stop playback or press
Delete to delete a personal OGM.
7. Press Back to return to the previous menu level.
1.
2.
3.
4.
Call screening
When the answering machine is on and takes a call, you can
use the loudspeaker to listen to the caller leaving a message.
You can then identify the caller and decide whether to take the
call in person.
1. When your D811 rings, wait for the answering machine to
take the call. When the caller begins leaving a message,
the display shows Recording. Press Screen to hear the caller.
2. To interrupt and speak to the caller directly, press Talk. Or,
after the caller has hung up, and the display shows You have
a new message , press Play to play new messages.
3. Press Back to return to the previous menu level.
While screening, you can adjust the volume by pressing u or d.
Message playback
Each message is played back with day and time of the call
announced as well as the caller’s number. The caller’s number
is displayed (if stored in the phonebook).
Select outgoing message mode
When a memo is played back, Memo is displayed on the handset.
Choose which outgoing message you want to be played to
callers.
1. Press Menu and scroll d to Answer Machine.
Press Select.
2. Play is highlighted. Press Select to choose which messages
you want to play or scroll d to Play All and press Select to
play all messages.
3. Press Talk to switch between the earpiece and handset
loudspeaker.
During playback press Options then scroll u or d to: Pause,
Repeat Message , Skip Forward, Skip Backward , Delete.
4. Press Select to choose the highlighted option. At the end of
playback, press Back to return to the previous menu level.
Press Menu, scroll d to Answer Machine and press Select.
Scroll d to Answer Settings and press Select .
Answer Mode is highlighted, press Select .
Scroll u or d to Answer & Record or Answer Only and press
Select.
5. If there is a personal OGM saved, press u or d to Default
OGM or Personal OGM and press Select. Your selection is
confirmed. If there is no personal OGM saved the default
OGM will be selected.
6. Press Back to return to the previous menu level.
1.
2.
3.
4.
Record a memo
Memos can only be recorded via the handset.
Press Menu, scroll d to Answer Machine and press Select.
Scroll d to Record Memo and press Select.
The display shows Please speak after the tone .
After your hear the tone, speak your memo then press Save
or # to end recording.
5. Your memo is played back. If you want to delete it, press
Delete during playback. If you press Save or wait for the
message to play back, it will be saved.
6. Press Back to return to the previous menu level.
1.
2.
3.
4.
Answering machine
New / unplayed messages cannot be deleted.
1. Press Menu, scroll d to Answer Machine and press Select .
2. Scroll d to Delete Messages and press Select .
3. Display shows Delete all old messages? Press Yes to confirm or
No to cancel.
4. Press Back to return to the previous menu level.
MEMORY FULL
If the memory is within 10 seconds of becoming full while a
caller is leaving a message, they will hear, “Please complete
your message within 10 seconds”. If they are still talking when
the memory becomes full the caller hears, “Thank you for
calling”, and the machine will hang up.
The OGM will set to Answer Only . You must delete messages
before your D811 can record new messages.
Remote access
You can operate your answering machine from any
Touchtone™ phone by calling your D811 and entering a 4 digit
security code.
Switch remote access On or Off.
1.
2.
3.
4.
5.
Press Menu, scroll d to Answer Machine and press Select .
Scroll d to Answer Settings and press Select.
Scroll u or d to Remote Access and press Select.
Scroll u or d to highlight On or Off and press Select.
Press Back to return to previous menu or > key to return to
standby.
Change the remote access PIN
6 To play next message
Press Menu, scroll d to Answer Machine and press Select .
Scroll d to Answer Settings and press Select.
Scroll u or d to Remote Access and press Select.
Scroll u or d to highlight Set Remote PIN and press Select .
Enter the Old 4-digit PIN and press Save . (Default setting =
0000)
6. Enter the new 4-digit Pin and press Save .
7. Enter the new PIN again and press Save .
8. Press Back to return to previous menu or > key to return to
standby.
It is advisable to make a note of your new PIN code and keep it
somewhere safe.
Delete all old messages
This PIN is different from the System PIN used when resetting
the unit or when registering/de-registering handset.
KEYBOARD SHORTCUTS
During playback:
1 To pause
2 To resume
3 To repeat message
4 To play previous message
5 To delete current message
Answering Machine messages that are not deleted are
automatically saved.
1.
2.
3.
4.
5.
17
EN
D811_IFU_EN.fm Page 17 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 18 Friday, September 7, 2007 7:37 PM
Switch your answering machine on
remotely
If you forget to switch your answering machine on, you can do
it remotely from another phone.
1. Dial your telephone number and let it ring. After 20 rings
you will hear your outgoing message.
2. Press *, then enter your security code.
(Default setting = 0000)
3. Press
and your answering machine will switch on ready
to answer incoming calls.
Time saver
When you ring in to access your messages remotely, if your
answering machine is set to time saver and you have new
messages it will answer after 2 rings, if you do not have any
new messages, it will answer after 6 rings. This means you can
hang up after 3 rings knowing you have no new messages,
saving you time and the cost of the call.
You cannot use this feature if you have certain network features
active as the call will be intercepted before the 20 rings.
Play messages
1. Dial your phone number. When you hear your outgoing
message, press
.
2. Enter your 4 digit PIN. (Default setting = 0000)
3. Use the keypad to operate your answering machine:
To hear main menu
To play messages
To play new messages
voice prompt and your D811 will hang up.
12. Text messaging
Welcome to the text messaging Service on your D811. Your
D811 can send and receive text messages from participating
mobile networks and compatible landline telephones in the RSA.
IMPORTANT
You must subscribe to your Network Provider’s Caller Display
and SMS Messaging services so that you can use text messaging
and you must not withhold your telephone number.
The Telkom Caller Services required are IdentiCall and Home
SMS. Call 10219 for further details.
Subscribe to the text messaging
service
When you send your first text message from your D811 you will
automatically be registered for the service.
If you have Set-Up problems, please check with your Network
provider.
Send a text message
If you are writing a text and you receive a call, the text will be
displayed again when Write Message is selected.
1.
2.
3.
4.
Press Menu , Text Messaging is displayed, press Select .
Write Message is highlighted. Press Select .
Use the keypad to enter your message.
Press Options .
Send is highlighted Press Select to send the message. Enter the
phone number or press Search to open the
phonebook then scroll to the number you
want and press Select . Now press Send .
To skip back during messages
To delete during messages
Or scroll
To skip forward during messages
Save
Press Select to save the message in the
Drafts folder.
Insert Symbol
Press Select . The symbol table is displayed.
Press
or
to highlight the symbol you
want then press Insert .
or
To set to answer only or answer and record
To record a new outgoing message
To set answer off
To set answer on
If you have any new messages they will be played after you
have entered your security PIN code.
If you enter an incorrect PIN code you will hear ‘Incorrect
security code. Please enter your security code’. You can try
entering the code again. If it is still incorrect you will hear the
18
.
/
>
, " (
£ €
to:
?
)
$
!
_
¥
¡
+
¤
¿ ' @ :
& % * =
\ ~ # §
;
<
Text messaging
Φ Γ Λ Ω Π Ψ Σ θ Ξ
Insert Emoticon
Press Select. The Emoticon table is
displayed. Press u or d to highlight the
Emoticon you want then press Insert.
all handset Outboxes, Drafts boxes and Inboxes.
When you receive a new text message, the
displayed along with You have X new messages.
icon is
DO YOU HAVE TWO TEXT PHONE BASES
CONNECTED TO THE SAME PHONE LINE?
If you have two text phone base stations plugged into one line,
you are likely to experience problems receiving text messages.
Normally, only one SMS enabled base unit (DECT or cordless)
can be plugged into any line.
If you do want to use two base units and still receive written text
you must delete receive service centre number from one of the
base stations. To do this on your D811, see page 20.
Insert Template
Press Select. The list of templates is
displayed. Press u or d to highlight the
Template you want then press Insert.
5. When sending a message, the display shows Sending
Message then Message Sent.
WRITING TIPS
Press Clear to delete incorrect characters.
Use u or d to move the cursor through the text, if you want
to insert/delete text.
UPPER & LOWER CASE
Press # to switch between upper case ABC, lower case abc
letters and numbers.
Maximum number of characters in a text message is 160. The
display shows a character countdown from 160 down to 0
(Unless message size is set to 612 characters).
If the text is unsuccessful, the message Message Sending Failed!
will be displayed.
In order to send and receive text messages you must not
withhold your number.
Standard text entry
With standard text entry you can enter a word by pressing each
letter button a number of times to display the character you
want on the screen. For example, to write the word “Hello”,
press 4 twice, 3 twice, 5 three times, 5 three times and
6 three times.
Receiving and reading text messages
Your D811 can store up to a total of 50 short messages across
Text messaging
This will allow you to send text via either base station but texts
will only be received on the product with the active receive
centre number.
If the base unit with the active receive centre number is a DECT
product then all handsets registered to will be able to receive
text messages.
will go straight to the Inbox, if not scroll d to Inbox and
press Select.
3. Scroll u or d to the message you want and press Read.
Scroll u or d through the message.
4. Press Options and scroll u or d to:
Reply
Forward
Message Details
You can see who sent the message and
then call them. Press Select the sender’s
number is displayed. Press Dial if you want
to call the number.
Use Number
To call the sender, press Select. The display
shows Call. Press Select to call the sender
OR to save the number, scroll d to Save
and press Select. Enter a name and press
OK , edit the number if required then press
Save. Scroll u or d to the ringtone and
press Select . The number is saved in the
phonebook.
Delete
Press Select. Press Yes to confirm or No to
cancel.
MEMORY FULL ALERT
If the text mailboxes are full when you attempt to write a new
message the display shows Memory Full Delete Messages. You must
delete messages before you can write and send a new one.
Read a new message
Received messages are stored in the Inbox.
1. The Inbox is opened and the list of messages displayed. If
you press Back the message is stored in the Inbox for
reading later.
2. In the Inbox scroll u (to more recent messages) or d (to
earlier list of messages) through the list of messages.
3. Highlight the message you want to read and press Read or
press Back to return to Text messaging menu.
4. Press > to return to standby.
Read, forward, delete, view and save
numbers of texts in the Inbox
Press Select. Write your reply then press
Options and select Send .
Press Select. The message is displayed.
Press Options. Display highlights Send . Press
Select and enter a number or search for the
number then press Send .
Edit or send texts in the Drafts box
If you save a message to complete or send later it will be stored
in the Drafts box. Only one message can be saved in each
user’s Drafts box.
1. To open the Drafts box, press Menu, Text Messaging is
displayed. Press Select.
2. Scroll d to Drafts and press Select.
3. Press Edit to edit your message content.
4. Press Options and scroll u or d to Send, Save, Insert Symbol ,
Insert Emoticon and Insert Template.
When you see the new message alert, if you press Back the
message is stored in your Inbox so you can read it later.
5. When sending a message, the display shows Sending
Message then Message Sent.
1. To open the Inbox, press Menu, Text Messaging is displayed.
Press Select.
2. Scroll d to Inbox and press Select .
If you have new messages (indicated by a green dot), you
Forward or delete texts in the Outbox
Your D811’s outbox is like a redial list. It holds a copies of up to
5 sent messages. When the Outbox is full, a new message
replaces the oldest.
19
EN
D811_IFU_EN.fm Page 19 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 20 Friday, September 7, 2007 7:37 PM
1. To open the Outbox box, press Menu, Text Messaging is
displayed. Press Select. Scroll d to Outbox and press Select .
2. Scroll u or d to the message you want and press Read.
Scroll u or d through the message.
3. Press Options and scroll u or d to:
Forward
Delete
Press Select. The message is displayed.
Press Options . Display highlights Send. Press
Select and enter the number or press Search
to search the phonebook. When the
number is entered, press Send.
Press Select then press Yes to confirm or No
to cancel.
4. Press > to return to standby.
Edit templates
You can set the templates to your preferred message, up to a
maximum of 32 characters. You can store up to 3 templates
1. Press Menu, Text Messaging is displayed. Press Select scroll
d to Templates and press Select.
2. Scroll u or d to the template you want and press Options.
Edit
Press Select. Press Clear to delete
characters. Enter your template text and
press Save.
Delete
Press Select. Press Yes to confirm or No to
cancel.
3. Press > to return to standby.
If you delete a template without replacing the text it is marked
as Empty.
Deleting texts
1. Press Menu, Text Messaging is displayed. Press Select scroll
d to Delete Messages and press Select.
2. Scroll u or d to Inbox, Drafts, Outbox or All Messages and
press Select.
3. Press Yes to confirm or No to cancel.
4. Press Back to return to standby.
Selecting All messages will delete all messages stored in your
Inbox, Outbox and Drafts box.
Service Centre numbers
To send and receive text messages you need the telephone
number of your Network’s text Centre. If you accidentally delete
the Outgoing or Incoming Service Centre numbers you will
need to re-enter them in order for your text Service to work. You
20
can enter up to 4 Service Centre numbers – two incoming and
two outgoing.
If you have more than one ‘Server Centre’ stored on your D811
you will need to select which one you want to use for sending
(see next section).
Add or change Service Centre
numbers
1. Press Menu, Text Messaging is displayed. Press Select , scroll
u or d to Text Settings and press Select .
2. Service Centres is highlighted press Select .
3. Scroll u or d to Receive Centres or Send Centre and press Select.
4. Scroll u or d to Receive Centre 1 or Receive Centre 2, or Send
Centre 1 or Send Centre 2 and press Select.
5. Enter the number for the centre and press Save.
6. Press Back to return to the previous menu level. To return to
standby, close the cover or press >.
Set send centre
1. Press Menu, Text Messaging is displayed. Press Select . Scroll
u or d to Text Settings and press Select .
2. Service Centres is highlighted press Select .
3. Press Select again to choose Set Send Centre.
4. Scroll u or d to Receive Centre 1 or Receive Centre 2 or Send
Centre 1 or Send Centre 2 and press Select.
5. Press Back to return to the previous menu level.
Message alert tone
When you receive a text message, the message alert tone will
sound. These beeps can be switched on or off.
1. Press Menu, Text Messaging is displayed. Press Select . Scroll
d to Text Settings and press Select.
2. Scroll d to Message Alert and press Select.
3. Scroll u or d to On or Off and press Select .
4. Press Back to return to the previous menu level.
Set message size
4. Press Back to return to the previous menu level.
User areas
Your D811 is pre-set to make all text messages available to
every user, with all messages sent from and received at a
‘Common Box’.
To keep your messages private, you can set up to 4 PIN
protected personal user areas (sub-addresses). Each personal
user area has its own Inbox and Outbox which are only
accessible when the correct PIN is entered.
You can also keep a common box sub address for incoming
messages that do not need to be kept private.
Add a user mailbox
If you set-up personal user boxes you must tell people your
user area number. They must put the relevant user area
number at the end of your telephone number when they send
you a text message. If they do not include the user area
number, the messages will be stored in the common box and
will be accessible to all users of your D811.
The mailbox number can only be any number from 0-9 but must
not be the same as another user’s mailbox number or the
common or public box number.
1. Press Menu, Text Messaging is displayed. Press Select. Scroll
d to Text Settings and press Select .
2. Scroll d to Users and press Select .
3. User 1 is highlighted. Scroll u or d to select another User.
4. Press Options . Edit is highlighted. Press Select .
5. Enter the user name (up to 8 characters) and press Save.
6. Use the single digit mailbox number displayed or enter your
own single digit mailbox number then press Save.
7. Enter a 4-digit mailbox PIN and press Save.
8. Enter the password again and press Save .
9. Press Back to return to the previous menu level.
Open and read a mailbox text
A standard text message is 160 characters long. You can set a
message to be up to 612 characters and the message will be
sent as up to 4 linked messages each up to 160 characters
long.
Once mailboxes have been set, when you open the Text
Messaging menu, the mailboxes in use will be displayed. You can
1. Press Menu, Text Messaging is displayed. Press Select . Scroll
d to Text Settings and press Select .
2. Scroll d to Message Size and press Select.
3. Scroll u or d to highlight 160 or 612 characters, then
press Select .
1. The display shows You have X new messages .
2. Press Read. The mailboxes are displayed. Mailboxes with
new messages are marked with green dots.
3. Scroll d to the mailbox you want and press Select.
4. Enter the mailbox 4-digit PIN and press OK.
5. Scroll u or d to the message you want and press Read.
open the General User Mailbox without any password but each
user area requires you to enter the 4-digit password PIN.
Text messaging
Or
1. If you have previously pressed Back, the display shows
.
2. Press Menu, the text icon is displayed. Press Select.
Mailboxes with new messages are marked with green dots.
3. Scroll d to the mailbox you want and press Select.
4. Enter the mailbox 4-digit PIN and press OK.
5. Scroll d to Inbox and press Select.
6. Scroll u or d to the message you want and press Read.
Edit a user mailbox
1. Press Menu, Text Messaging is displayed. Press Select . Scroll
d to the mailbox you want to edit and press Select.
2. Enter the 4 digit mailbox password PIN and press OK.
3. Scroll u or d to Text Settings and press Select.
4. Scroll u or d to Users and press Select.
5. Scroll u or d to the user mailbox you want to edit and
press Options.
6. Edit is highlighted, press Select.
7. Enter the current mailbox PIN and press OK.
8. Enter the new name and press Save.
9. Enter the new one-digit mailbox number and press Save.
10. Enter the new 4-digit mailbox password and press Save.
11. Re-enter new 4-digit the password and press Save.
12. Press Back to return to the previous menu level or > to
return to standby.
Delete a user mailbox
1. Press Menu, Text Messaging is displayed. Press Select . Scroll
d to the mailbox you want to edit and press Select.
2. Enter the 4 digit mailbox password PIN and press OK.
3. Scroll u or d to Text Settings and press Select.
4. Scroll u or d to Users and press Select.
5. Scroll u or d to the user mailbox you want to delete and
press Options.
6. Scroll d to Delete and press Select.
7. Press Yes to confirm or No to cancel.
8. Enter the current mailbox PIN and press OK.
9. Press Back to return to the previous menu level or > to
return to standby.
Set common mailbox sub address
4. Enter the single digit mailbox number you want and press
Save . If you enter a number already in use, you hear an
error beep. Enter a different number.
5. Press Back to return to the previous menu level or > to
return to standby.
13. Using additional handsets
You can use up to five D811 additional handsets with your
D811 base to extend your phone system without needing to
install extension sockets for each new phone.
Your D811 handset can also be registered to up to 3 other
bases. You can then select the base you would prefer to use.
If you have purchased a D811 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you
must register it to your D811 base before it can be used.
Registering an additional handset
At the base:
1. Press and hold p for 2 seconds until the base Power
starts flashing. The base will remain in registration mode for
90 seconds.
At the handset:
1. If the handset is new and the display shows Please Register .
Press Menu. Scroll u to Registration. Press Select.
Or
If the handset has already been registered to another base
the standby display is shown. Press Menu, scroll u or d to
Registration and press Select .
2. Register Handset is highlighted. Press Select.
3. Bases are displayed. If necessary, scroll u or d to a new
base you wish to register your D811 handset to and press
Select.
4. Enter the system PIN and press OK . (Default setting =
0000)
5. The display shows Searching Base X (where X is the chosen
base number) then Handset Registered .
The handset is automatically assigned the next available
handset number.
If registration is not successful first time, please repeat the
process again in case the base registration period ran out of
time.
If there are already 5 handsets registered to the base, the
registration will fail. You must de-register another handset before
you can register the new one.
The default sub-address setting is 9.
Select a base
1. Press Menu, Text Messaging is displayed. Press Select .
2. Scroll u or d to Text Settings and press Select.
3. Scroll d to Mailbox Number and press Select.
1. Press Menu, scroll u or d to Registration and press Select.
Using additional handsets
If your D811 handset is registered to more than one base, you
can select which base to use.
21
EN
D811_IFU_EN.fm Page 21 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 22 Friday, September 7, 2007 7:37 PM
2. Scroll d to Select Base and press Select .
3. All base numbers are displayed. (In use) is added to bases
where the handset was previously registered to. Scroll u
or d to the base you want and press Select.
4. Display shows Searching Base…. then the standby display for
that base.
14. Help
Answering machine does not record any
messages
Phone does not work
• The memory may be full. Play and delete old messages, see
page 17.
De-register a handset
• Is the telephone cord of the base plugged into the phone
socket?
• Check that the mains power is correctly connected to the
base and to the handset charger(s).
• Only use the telephone cord supplied with the phone.
Use one handset to de-register another. You cannot de-register
the handset you are using.
1. Press Menu, scroll u or d to Registration and press Select .
2. Scroll d to De-register and press Select.
3. Enter the system PIN and press OK. (Default setting =
0000)
4. Scroll u or d to the handset you want to de-register and
press Select.
5. Press Yes to confirm or No to cancel.
6. Press Back to return to the previous menu level or > to
return to standby.
• Have you installed the batteries correctly?
• Check that the mains power is correctly connected.
No dial tone
Cannot dial out or receive calls
• Check that the mains power is correctly connected.
• The batteries may need recharging.
• Has there been a power cut? If so, place the handset back
on the base for 10 seconds and try again. If it still does not
work disconnect the batteries and mains power for 10
minutes, then reconnect and try again.
You have a dial tone, but the phone will not dial out
• You may need to change the dial mode from tone to pulse,
see page 12.
• If you are connected to a switchboard, check whether you
need to dial an access code.
Handset does not ring
•
•
•
•
The ringer volume may be switched off, see page 11.
Check that the mains power is correctly connected.
Check that the line cord is connected.
Make sure the handset is registered to the base, see
page 21.
No display
• The batteries may be flat, dead or incorrectly inserted.
Recharge or replace the batteries.
icon flashes
•
•
•
•
Is the handset registered correctly to the base, see page 21.
Check that the mains power is correctly connected.
Check that the handset is within range of the base.
The batteries are low, place the handset on the base/
charger to recharge.
icon not scrolling
• Try cleaning the charging contacts.
• Check that the mains power is correctly connected.
You hear the busy tone when you press <.
• Make sure the handset is in range of the base.
• Another handset registered to your D811 base may be on
the line.
22
Answering machine messages have the wrong
date and time
• Have you set the date and time? See page 13.
No Caller Display number/name displayed
• Have you subscribed to a Caller Display service from your
network provider? See page 14.
• The caller may have withheld their number.
• An exact name/number match was not found in your
directory. Check that you have stored the full STD dialling
code.
Cannot register a handset to a base
• You can register a total of 5 handsets to your D811 base and
you can register your D811 handset to up to 4 bases. Check
that you have not exceeded the limits.
• Check that you have entered the correct PIN number
(default PIN 0000).
• Check that you are at least one metre away from other
electrical equipment to avoid interference when registering.
Base unit does not ring, but the lights are on
• Have you connected the telephone line correctly?
• Is the base ringer set to off?
• You may have a faulty line or socket. Try using another
socket or line.
Buzzing noise on my phone or on other electrical
equipment nearby
• Sometimes your D811 can interfere with other electrical
equipment if it is placed too close. It is recommended that
you place your D811 at least one metre away from electrical
appliances or metal obstructions to avoid any risk of
interference.
Possible problems with text
messaging
Text messages cannot be sent and screen
displays Message Sending Failed
• The base station power supply or telephone line cord might
not be properly connected. Check that the base station
power supply is plugged into the mains socket and switched
on and that the telephone is plugged into the telephone wall
socket.
Help
• There might be a fault on the line. Check your telephone line
is working properly.
• You might have deleted the server number in error. See
page 20 for instructions on how to enter the number.
Cannot send text
• The send and receive service center numbers are preprogrammed. If you need to change them, please refer to
“Add or change Service Centre numbers” on page 20 or
contact your service provider.
Cannot receive text
• You will not be able to receive text messages until you have
first sent a message. The first message sent registers you
with the text service.
• More than one text messaging product is plugged into the
line. Remove other products.
• Check service centre number is correct.
• Ensure you have subscribed to a Caller Display service and
that it is active. You can check this by noting if your phone
displays your caller’s number when you receive an incoming
call.
• If you are using personal user areas please ensure you have
given people your user area number and that they are
entering it to the end of your telephone number when
sending you a text message.
You keep hearing an error beep
• You have pressed the wrong button in a sequence. Check
the prompts in the display or refer to instructions in this user
guide.
15. General information
IMPORTANT
•
This equipment is not designed for making emergency
telephone call when the power fails. Alternative arrangements
should be made for access to emergency services.
•
This product is intended for connection to analogue public
switched telephone networks and private switchboards in the
United Kingdom.
Safety information
• Only use the power supply suitable for the D811 range.
Using an unauthorised power supply will invalidate your
guarantee and may damage the telephone.
• Use only the approved rechargeable batteries supplied.
• Do not open the handset (except to replace the handset
batteries) or the base. This could expose you to high
voltages or other risks.
• Radio signal transmitted between the handset and base may
cause interference to hearing aids.
• It is recommended that advice from a qualified expert be
sought before using this product in the vicinity of emergency/
intensive care medical equipment.
• It is recommended that if you have a pacemaker fitted you
check with a medical expert before using this product.
• Your product may interfere with other electrical equipment,
e.g. TV and radio sets, clock/alarms and computers if placed
too close.
It is recommended that you place your product at least one
metre away from such appliances to minimise any risk of
interference.
• Never dispose of batteries in a fire. There is a serious risk of
explosion and/or the release of highly toxic chemicals.
Cleaning
• Clean the handset and base (or charger) with a damp (not
wet) cloth, or an anti-static wipe.
Never use household polish as this will damage the product.
Never use a dry cloth as this may cause a static shock.
Environmental
• Do not expose to direct sunlight.
• The handset may become warm when the batteries are
being charged or during prolonged periods of use. This is
General information
•
•
normal. However, we recommend that to avoid damage you
do not place the product on antique/veneered wood.
Do not stand your product on carpets or other surfaces
which generate fibres, or place it in locations preventing the
free flow of air over its surfaces.
Do not submerge any part of your product in water and do
not use it in damp or humid conditions, such as bathrooms.
Do not expose your product to fire, explosive or other
hazardous conditions.
There is a slight chance your phone could be damaged by
an electrical storm. We recommend that you unplug the
power and telephone line cord during an electrical storm.
Product disposal instructions
The symbol shown here and on the product means
that the product is classed as Electrical or
Electronic Equipment and should not be disposed
with other household or commercial waste at the
end of its working life.
The Waste of Electrical and Electronic Equipment
(WEEE) Directive (2002/96/EC) has been put in place to
recycle products using best available recovery and recycling
techniques to minimize the impact on the environment, treat
any hazardous substances and avoid the increasing landfill.
Product disposal instructions for
residential users
When you have no further use for it, please remove any
batteries and dispose of them and the product per your local
authority’s recycling processes. For more information please
contact your local authority or the retailer where the product
was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check the
terms and conditions of the purchase contract and ensure that
this product is not mixed with other commercial waste for
disposal.
Warranty Information
The authorized Motorola dealer or retailer where you
purchased your Motorola product will honour a warranty claim
and/or provide warranty service.
Please return your radio to your dealer or retailer to claim your
warranty service. Do not return your telephone to Motorola. In
order to be eligible to receive warranty service, you must
present your receipt of purchase or a comparable substitute
23
EN
D811_IFU_EN.fm Page 23 Friday, September 7, 2007 7:37 PM
D811_IFU_EN.fm Page 24 Friday, September 7, 2007 7:37 PM
proof of purchase bearing the date of purchase. The telephone
should also clearly display the serial number. The warranty will
not apply if the type or serial numbers on the product have been
altered, deleted, removed, or made illegible.
What Is Not Covered By The Warranty
• Defects or damage resulting from use of the Product in other
than its normal and customary manner or by not following
the instructions in this user manual.
• Defects or damage from misuse, accident or neglect.
• Defects of damage from improper testing, operation,
maintenance, adjustment, or any alteration or modification of
any kind.
• Breakage or damage to aerials unless caused directly by
defects in material or workmanship.
• Products disassembled or repaired in such a manner as to
adversely affect performance or prevent adequate
inspection and testing to verify any warranty claim.
• Defects or damage due to range.
• Defects or damage due to moisture, liquid or spills.
• All plastic surfaces and all other externally exposed parts
that are scratched or damaged due to normal use.
• Products rented on a temporary basis.
• Periodic maintenance and repair or replacement of parts
due to normal usage, wear and tear.
Service Enquiries
For any service or product information queries relating to
this telephone, please call or SharedCall number
08602HELPU (08602 4357 8) or visit our website on
www.phones4telkom.co.za
Technical Information
16. Wall mounting
How many telephones can I have?
IMPORTANT
All items of telephone equipment have a Ringer Equivalence
Number (REN), which is used to calculate the number of items
which may be connected to any one telephone line. Your D811
has a REN of 1. A total REN of 4 is allowed. If the total REN of
4 is exceeded, the telephones may not ring. With different
telephone types there is no guarantee of ringing, even when the
REN is less than 4.
Any additional handsets and chargers that you register have a
REN of 0.
Before you wall-mount your D811, check that you are not
drilling into any hidden wiring.
Before you drill, make sure the power and telephone line cables
will reach the sockets.
1. Use the following templates to mark the drilling locations.
• To wall-mount the base, drill two holes in the wall 3.6cm
apart horizontally using an 8mm drill bit.
Declaration of Conformance
Hereby, Motorola declares that this D811 is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for the D811 is published on
the website: http://www.motorola.com/eu/radios/
technicaldocumentation
Inserting a pause
With some switchboards, after dialling the access code you
may have to wait for a moment while the switchboard picks up
an outside line so you will need to enter a pause in the dialing
sequence.
Press and hold
to insert a pause (P) before entering the
telephone number.
You may also need to enter a pause when storing international
numbers or charge card numbers.
Recall
You may need to use the recall function if you are connected to
a switchboard/PBX (Private Branch Exchange), contact your
PBX supplier for further information.
24
Wall mounting
D811_IFU_EN.fm Page 25 Friday, September 7, 2007 7:37 PM
3. Pull the base/charger out of the stand and slot the holes on
the back of the base over the screw heads and gently pull
the base/charger down to make sure it is securely in place.
EN
• To wall-mount the charger, drill two holes in the wall 4cm
apart horizontally using an 8mm drill bit.
2. Insert the wall plugs if necessary, then insert the screws
leaving about 5mm protruding from the wall on which to
hang the phone.
Wall plug
Wall
Wall mounting
Screw
XXmm
25