Asus G51J User manual

E4878

Notebook PC User Manual

ANT.

1394

Downloaded from LpManual.com Manuals

September 2009

Table of Contents

Chapter 1: Introducing the Notebook PC

About This User’s Manual ................................................................................ 6

Notes for This Manual ....................................................................................... 6

Safety Precautions ............................................................................................. 7

Preparing your Notebook PC ......................................................................... 9

Chapter 2: Knowing the parts

Top Side ...............................................................................................................12

Bottom Side ........................................................................................................15

Right Side ............................................................................................................18

Left Side ...............................................................................................................21

Rear Side ..............................................................................................................24

Front Side ............................................................................................................26

Chapter 3: Getting Started

Power System ....................................................................................................28

Using AC Power ...............................................................................................28

Using Battery Power ......................................................................................30

Battery Care ......................................................................................................31

Powering ON the Notebook PC .................................................................32

The Power-On Self Test (POST) ..................................................................32

Checking Battery Power ...............................................................................34

Charging the Battery Pack ...........................................................................35

Power Options .................................................................................................36

Power Management Modes .......................................................................38

Sleep and Hibernate ......................................................................................38

Thermal Power Control .................................................................................39

Special Keyboard Functions .........................................................................40

Colored Hot Keys ............................................................................................40

Microsoft Windows Keys ..............................................................................42

Multimedia Control Keys (on selected models) ...................................44

Switches and Status Indicators ...................................................................45

Switches .............................................................................................................45

Status Indicators .............................................................................................47

2


Notebook PC User Manual

Chapter 4: Using the Notebook PC

Pointing Device .................................................................................................50

Using the Touchpad .......................................................................................51

Touchpad Usage Illustrations .....................................................................52

Caring for the Touchpad ..............................................................................54

Automatic Touchpad Disabling .................................................................54

Expansion Card ................................................................................................56

Optical Drive .....................................................................................................58

Flash Memory Card Reader .........................................................................62

Hard Disk Drive ................................................................................................63

Memory (RAM) .................................................................................................65

Connections .......................................................................................................66

Network Connection .....................................................................................66

Wireless LAN Connection (on selected models) .................................68

Windows Wireless Network Connection ................................................70

Bluetooth Wireless Connection(on selected models) .......................72

Antenna Connections (on selected models) ........................................75

Appendix

Optional Accessories .....................................................................................A-2

Optional Connections .................................................................................A-2

Operating System and Software ...............................................................A-3

System BIOS Settings ..................................................................................A-4

Common Problems and Solutions .........................................................A-8

Recovering Your Notebook PC ............................................................... A-14

Using Recovery Partition ....................................................................... A-14

Using Recovery DVD (on selected models) ...................................... A-15

DVD-ROM Drive Information ................................................................. A-17

Internal Modem Compliancy ................................................................ A-19

Declarations and Safety Statements .................................................... A-23

Federal Communications Commission Statement ........................ A-23

FCC Radio Frequency (RF) Exposure Caution Statement ............ A-24

Declaration of Conformity(R&TTE directive 1999/5/EC) .............. A-24

CE Marking ................................................................................................... A-25

IC Radiation Exposure Statement for Canada ................................. A-25



3

Wireless Operation Channel for Different Domains ...................... A-26

France Restricted Wireless Frequency Bands .................................. A-26

UL Safety Notices ....................................................................................... A-28

Power Safety Requirement .................................................................... A-29

TV Tuner Notices ........................................................................................ A-29

REACH ........................................................................................................ A-29

Nordic Lithium Cautions (for lithium-ion batteries) ...................... A-30

Optical Drive Safety Information ......................................................... A-31

Laser Safety Information ......................................................................... A-31

Service warning label ............................................................................... A-31

CDRH Regulations ..................................................................................... A-31

Macrovision Corporation Product Notice ......................................... A-32

CTR 21 Approval(for Notebook PC with built-in Modem) .......... A-33

Copyright Information .............................................................................. A-36

Limitation of Liability ................................................................................. A-37

Service and Support ................................................................................... A-37

4



Chapter 1:

1

Notebook PC


About This User’s Manual

You are reading the Notebook PC User’s Manual. This User’s Manual provides information regarding the various components in the

Notebook PC and how to use them. The following are major sections of this User’s Manual:

1. Introducing the Notebook PC

Introduces you to the Notebook PC and this User’s Manual.

2. Knowing the Parts

Gives you information on the Notebook PC’s components.

3. Getting Started

Gives you information on getting started with the Notebook PC.

4. Using the Notebook PC

Gives you information on using the Notebook PC’s components.

5. Appendix

Introduces you to optional accessories and gives additional information.

The actual bundled operating system and applications differ by models and territories. There may be differences between your

Notebook PC and the pictures shown in this manual. Please accept your Notebook PC as being correct.

Notes for This Manual

A few notes and warnings are used throughout this guide, allowing you to complete certain tasks safely and effectively. These notes have different degrees of importance as follows:

WARNING!

Important information that must be followed for safe operation.

IMPORTANT!

Vital information that must be followed to prevent damage to data, components, or persons.

TIP:

Tips for completing tasks.

NOTE:

Information for special situations.

6



Safety Precautions

The following safety precautions will increase the life of the

Notebook PC. Follow all precautions and instructions. Except as described in this manual, refer all servicing to qualified personnel.

Disconnect the AC power and remove the battery pack(s) before cleaning. Wipe the Notebook PC using a clean cellulose sponge or chamois cloth dampened with a solution of nonabrasive detergent and a few drops of warm water and remove any extra moisture with a dry cloth.

DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.

DO NOT expose to dirty or dusty environments.

DO NOT operate during a gas leak.

DO NOT press or touch the display panel. Do not place together with small items that may scratch or enter the Notebook PC.

DO NOT leave the

Notebook PC on your lap or any part of the body to prevent discomfort or injury from heat exposure.

DO NOT place or drop objects on top and do not shove any foreign objects into the

Notebook PC.

DO NOT expose to strong magnetic or electrical fields.

DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.

Battery safety warning:

DO NOT throw the battery in fire. DO NOT short circuit the contacts.

DO NOT disassemble the battery.



7

SAFE TEMP: This

Notebook PC should only be used in environments with ambient temperatures between 10°C (50°F) and

35°C (95°F)

DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

INPUT RATING: Refer to the rating label on the bottom of the Notebook

PC and be sure that your power adapter complies with the rating.

DO NOT use strong solvents such as thinners, benzene, or other chemicals on or near the surface.

DO NOT use damaged power cords, accessories, or other peripherals.

Incorrect installation of battery may cause explosion and damage the Notebook PC.

DO NOT throw the Notebook PC in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.

DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

8



Preparing your Notebook PC

These are only quick instructions for using your Notebook PC.

Installing the Battery Pack

3

1

2

Connecting the Power Adapter

110V

-220V

3

1

2



9

Opening the LCD display panel

1. Carefully lift up the display panel with your thumb.

2. Slowly tilt the display panel forward or backward to a comfortable viewing angle.

Turning on the Power

1. Push and release the power button located beneath the LCD display panel.

2. Use [Fn]+[F5] or [Fn]+[F6] to adjust the LCD brightness.

10



Chapter 2:

2


Top Side

The keyboard differs for each territory.

1

2

3

8

9

6

7

4

5

12



1

Camera

The built-in camera allows picture taking or video recording. Can be used with video conferencing and other interactive applications.

2

Microphone (Built-in)

The built-in mono microphone can be used for video conferencing, voice narrations, or simple audio recordings.

3

Display Panel

The display panel functions the same as a desktop monitor.

The Notebook PC uses an active matrix TFT LCD, which provides excellent viewing like that of desktop monitors.

Unlike desktop monitors, the LCD panel does not produce any radiation or flickering, so it is easier on the eyes. Use a soft cloth without chemical liquids (use plain water if necessary) to clean the display panel.

4

Status Indicators (top)

Status indicators represent various hardware/software conditions. See indicator details in Chapter 3.

5

Instant Keys

Instant keys allow you to launch frequently used applications with one push of a button. Details are described in section 3.

6

Express Gate Key

Pressing this button will launch Express Gate. Refer to the

Express Gate User’s Manual for details. This key does not function when in Windows environment.



13

7

8

9

Power Switch

The power switch allows powering ON and OFF the

Notebook PC and recovering from STD. Use the switch once to turn ON and once to turn OFF the Notebook PC. In

Windows XP, this button can also be used to safely turn OFF the Notebook PC. The power switch only works when the display panel is opened.

Keyboard

The keyboard provides full-sized keys with comfortable travel (depth at which the keys can be depressed) and palm rest for both hands. Two Windows function keys are provided to help ease navigation in the Windows operating system.

Touchpad and Buttons

The touchpad with its buttons is a pointing device that provides the same functions as a desktop mouse. A software-controlled scrolling function is available after setting up the included touchpad utility to allow easy

Windows or web navigation.

14



Bottom Side

The bottom side may vary in appearance depending on model.

The battery pack size varies depending on model.

1 2 3

5 4

WARNING! The bottom of the Notebook PC can get very hot. Be careful when handling the Notebook PC while it is in operation or recently been in operation. High temperatures are normal during charging or operation. Do not use on soft surfaces such as beds or sofas which may block the vents. DO NOT PUT THE

NOTEBOOK PC ON YOUR LAP OR OTHER PARTS OF THE BODY TO

AVOID INJURY FROM THE HEAT.



15

1

2

3

Battery Lock - Manual

The manual battery lock is used to keep the battery pack secured. Move the manual lock to the unlocked position to insert or remove the battery pack. Move the manual lock to the locked position after inserting the battery pack.

Battery Pack

The battery pack is automatically charged when the

Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage and by the specifications for this Notebook PC. The battery pack cannot be disassembled and must be purchased as a single unit.

Battery Lock - Spring

The spring battery lock is used to keep the battery pack secured. When the battery pack is inserted, it will automatically lock. To remove the battery pack, this spring lock must be held in the unlocked position.

4

Shutdown Button (Emergency)

In case your operating system cannot properly turn OFF or restart, the shutdown button can be pressed with a straightened paper clip to shutdown the Notebook PC.

16



5

Primary Hard Disk Drive Compartment

Secondary Hard Disk Drive Compartment (Optional)

The hard disk drive is secured in a compartment. Visit an authorized service center or retailer for information on hard disk drive upgrades for your Notebook PC. Only purchase hard disk drives from authorized retailers of this Notebook

PC to ensure maximum compatibility and reliability.

The secondary hard disk drive is optional. This hard disk drive bay may be empty or contain an optional hard disk drive depending on your purchase.



17

Right Side

1 2 3 4

5 6 7 8

1

2

3

Microphone Input Jack

The mono microphone jack (1/8 inch) can be used to connect an external microphone or output signals from audio devices. Using this jack automatically disables the built-in microphone. Use this feature for video conferencing, voice narrations, or simple audio recordings.

Audio Input Jack

The stereo input jack (1/8 inch) can be used to connect a stereo audio source to the Notebook PC. This feature is used mainly to add audio to multimedia applications.

SPDIF Output Jack

This jack provides connection to SPDIF (Sony/Philips Digital

Interface) compliant devices for digital audio output. Use this feature to turn the Notebook PC into a hi-fi home entertainment system.

Headphone Output Jack

The stereo headphone jack (1/8 inch) is used to connect the Notebook PC’s audio out signal to amplified speakers or headphones. Using this jack automatically disables the built-in speakers.

18



4

5

6

7

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB

2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec

(USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

Optical Drive

The Notebook PC comes in various models with different optical drives. The Notebook PC’s optical drive may support compact discs (CD) and/or digital video discs (DVD) and may have recordable (R) or re-writable (RW) capabilities.

See the marketing specifications for details on each model.

Optical Drive Activity Indicator

(location varies by model)

The optical drive activity indicator shows when data is being transferred by the optical disk drive. This indicator will light in proportion to the data size transferred.

Optical Drive Electronic Eject

The optical drive eject has an electronic eject button for opening the tray. You can also eject the optical drive tray through any software player or by right clicking the optical drive in Windows “Computer” and selecting Eject. This eject also functions as the optical drive activity indicator which shows when data is being transferred by the optical disk drive. This indicator will light in proportion to the data size transferred.



19

8

Optical Drive Emergency Eject

(location varies by model)

The emergency eject is used to eject the optical drive tray in case the electronic eject does not work. Do not use the emergency eject in place of the electronic eject.

20



Left Side

1 2 3 4 5 6 7 8

1 Display (Monitor) Output

The 15-pin D-sub monitor port supports a standard VGAcompatible device such as a monitor or projector to allow viewing on a larger external display.

2

Air Vents

The air vents allow cool air to enter and warm air to exit the

Notebook PC.

Ensure that paper, books, clothing, cables, or other objects do not block any of the air vents or else overheating may occur.

3

Antenna Input (on selected models)

The antenna input is for TV (on selected models) frequency signal and allows for use with the provided digital TV antenna or input from subscription television services.

The provided antenna can receive digital TV. Cable service connection can receive digital TV, analog TV, depending on paid services.

Use the provided adapter for use with coaxial connectors.



21

4

5

IEEE1394 Port (on selected models)

IEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units on the same bus. IEEE1394 is also used in high-end digital equipment and should be marked “DV” for Digital Video port.

E-SATA

E-SATA Port (on selected models)

External SATA or eSATA allows external connection of Serial-

ATA devices originally designed for use inside the computer.

It is up to six times faster than existing USB 2.0, & 1394 for external storage solutions and is also hot pluggable using shielded cables and connectors up to two meters.

6

HDMI

HDMI Port (on selected models)

HDMI (High-Definition Multimedia Interface) is an uncompressed all-digital audio/video interface between any audio/video source, such as a set-top box, DVD player, and A/V receiver and an audio and/or video monitor, such as a digital television (DTV). Supports standard, enhanced, or high-definition video, plus multi-channel digital audio on a single cable. It transmits all ATSC HDTV standards and supports 8-channel digital audio, with bandwidth to spare to accommodate future enhancements or requirements.

7

USB Port (2.0/1.1)

The USB (Universal Serial Bus) port is compatible with USB

2.0 or USB 1.1 devices such as keyboards, pointing devices, cameras, hard disk drives, printers, and scanners connected in a series up to 12Mbits/sec (USB 1.1) and 480Mbits/sec

(USB 2.0). USB allows many devices to run simultaneously on a single computer, with some peripherals acting as additional plug-in sites or hubs. USB supports hot-swapping of devices so that most peripherals can be connected or disconnected without restarting the computer.

22



8

ExpressCard Slot

One 26pin Express card slot is available to support one

ExpressCard/34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)



23

Rear Side

1 2 3 4

1

2

Kensington® Lock Port

The Kensington® lock port allows the Notebook PC to be secured using Kensington® compatible Notebook PC security products. These security products usually include a metal cable and lock that prevent the Notebook PC to be removed from a fixed object. Some may also include a motion detector to sound an alarm when moved.

Battery Pack

The battery pack is automatically charged when the

Notebook PC is connected to an AC power source and maintains power to the Notebook PC when AC power is not connected. This allows use when moving temporarily between locations. Battery time varies by usage and by the specifications for this Notebook PC. The battery pack cannot be disassembled and must be purchased as a single unit.

24



3

Power (DC) Input

The supplied power adapter converts AC power to DC power for use with this jack. Power supplied through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent damage to the Notebook

PC and battery pack, always use the supplied power adapter.

The adapter may become warm to hot when in use. Ensure not to cover the adapter and keep it away from your body.

4

LAN Port

The RJ-45 LAN port with eight pins is larger than the RJ-11 modem port and supports a standard Ethernet cable for connection to a local network. The built-in connector allows convenient use without additional adapters.



25

Front Side

1 2 3

1

2

3

Flash Memory Slot

Normally an external memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras, MP3 players, mobile phones, and PDAs. This Notebook PC has a built-in highspeed memory card reader that can conveniently read from and write to many flash memory cards.

Wireless Switch

Enables or disables the built-in wireless LAN and Bluetooth

(selected models). When enabled, the wireless status indicator will light. Windows software settings are necessary before use.

Status Indicators (front)

Status indicators represent various hardware/software conditions.

26



Chapter 3:

3


Power System

Using AC Power

The Notebook PC power is comprised of two parts, the power adapter and the battery power system. The power adapter converts

AC power from a wall outlet to the DC power required by the

Notebook PC. Your Notebook PC comes with a universal AC-DC adapter. That means that you may connect the power cord to any

100V-120V as well as 220V-240V outlets without setting switches or using power converters. Different countries may require that an adapter be used to connect the provided US-standard AC power cord to a different standard. Most hotels will provide universal outlets to support different power cords as well as voltages. It is always best to ask an experienced traveler about AC outlet voltages when bringing power adapters to another country.

2

110V

-220V

3

1

You can buy travel kits for the Notebook PC that includes power and modem adapters for almost every country.

WARNING! DO NOT connect the AC power cord to an AC outlet prior to connecting the DC plug to the Notebook PC. Doing so may damage the AC-DC adapter.

28



IMPORTANT! Damage may occur if you use a different adapter to power the Notebook PC or use the Notebook PC’s adapter to power other electrical devices. If there is smoke, burning scent, or extreme heat coming from the AC-DC adapter, seek servicing.

Seek servicing if you suspect a faulty AC-DC adapter. You may damage both your battery pack(s) and the Notebook PC with a faulty AC-DC adapter.

This Notebook PC may come with either a two or three-prong plug depending on territory. If a three-prong plug is provided, you must use a grounded AC outlet or use a properly grounded adapter to ensure safe operation of the Notebook PC.

WARNING! THE POWER ADAPTER MAY BECOME WARM TO HOT

WHEN IN USE. BE SURE NOT TO COVER THE ADAPTER AND KEEP

IT AWAY FROM YOUR BODY.

Unplug the power adapter or switch off the AC outlet to minimize the power consumption when the Notebook PC is not in use.



29

Using Battery Power

The Notebook PC is designed to work with a removable battery pack.

The battery pack consists of a set of battery cells housed together.

A fully charged pack will provide several hours of battery life, which can be further extended by using power management features through the BIOS setup. Additional battery packs are optional and can be purchased separately through a Notebook PC retailer.

Installing and Removing the Battery Pack

Your Notebook PC may or may not have its battery pack installed. If your Notebook PC does not have its battery pack installed, use the following procedures to install the battery pack.

IMPORTANT! Never attempt to remove the battery pack while the Notebook PC is turned ON, as this may result in the loss of working data.

To install the battery pack:

3

1

2

30



To remove the battery pack:

3

1

2

IMPORTANT! Only use battery packs and power adapters supplied with this Notebook PC or specifically approved by the manufacturer or retailer for use with this model or else damage may occur to the Notebook PC.

Battery Care

The Notebook PC’s battery pack, like all rechargeable batteries, has a limit on the number times it can be recharged. The battery pack’s useful life will depend on your environment temperature, humidity, and how your Notebook PC is used. It is ideal that the battery be used in a temperature range between 10˚C and 35˚C (50˚F and

95˚F). You must also take into account that the Notebook PC’s internal temperature is higher than the outside temperature. Any temperatures above or below this range will shorten the life of the battery. But in any case, the battery pack’s usage time will eventually decrease and a new battery pack must be purchased from an authorized dealer for this Notebook PC. Because batteries also have a shelf life, it is not recommended to buy extras for storing.

WARNING! For safety reasons, DO NOT throw the battery in fire,

DO NOT short circuit the contacts, and DO NOT disassemble the battery. If there is any abnormal operation or damage to the battery pack caused by impact, turn OFF the Notebook PC and contact an authorized service center.



31

Powering ON the Notebook PC

The Notebook PC’s power-ON message appears on the screen when you turn it ON. If necessary, you may adjust the brightness by using the hot keys. If you need to run the BIOS Setup to set or modify the system configuration, press [F2] upon bootup to enter the BIOS

Setup. If you press [Tab] during the splash screen, standard boot information such as the BIOS version can be seen. Press [ESC] and you will be presented with a boot menu with selections to boot from your available drives.

Before bootup, the display panel flashes when the power is turned ON. This is part of the Notebook PC’s test routine and is not a problem with the display.

IMPORTANT! To protect the hard disk drive, always wait at least

5 seconds after turning OFF your Notebook PC before turning it back ON.

WARNING! DO NOT carry or cover a Notebook PC that is powered ON with any materials that will reduce air circulation such as a carrying bag.

The Power-On Self Test (POST)

When you turn ON the Notebook PC, it will first run through a series of software-controlled diagnostic tests called the Power-On

Self Test (POST). The software that controls the POST is installed as a permanent part of the Notebook PC’s architecture. The POST includes a record of the Notebook PC’s hardware configuration, which is used to make a diagnostic check of the system. This record is created by using the BIOS Setup program. If the POST discovers a difference between the record and the existing hardware, it will display a message on the screen prompting you to correct the conflict by running BIOS Setup. In most cases the record should be correct when you receive the Notebook PC. When the test is finished, you may get a message reporting “No operating system found” if the hard disk was not preloaded with an operating system. This indicates that the hard disk is correctly detected and ready for the installation of a new operating system.

32



Self Monitoring and Reporting Technology

The S.M.A.R.T. (Self Monitoring and Reporting Technology) checks the hard disk drive during

POST and gives a warning message if the hard disk drive requires servicing. If any critical hard disk drive warning is given during bootup, backup your data immediately and run Windows disk checking program. To run

Window’s disk checking program: click

Start

> select

Computer

> right-click a hard disk drive icon

> choose

Properties

> click the

Tools

tab > click

Check Now

> click

Start

. You can also select “Scan ... sectors” for more effective scan and repair but the process will run slower.

IMPORTANT! If warnings are still given during bootup after running a software disk checking utility, you should take your

Notebook PC in for servicing. Continued use may result in data loss.



33

Checking Battery Power

The battery system implements the Smart Battery standard under the Windows environment, which allows the battery to accurately report the amount of charge left in the battery. A fully-charged battery pack provides the Notebook PC a few hours of working power. But the actual figure varies depending on how you use the power saving features, your general work habits, the CPU, system memory size, and the size of the display panel.

Screen captures shown here are examples only and may not reflect what you see in your system.

You will be warned when battery power is low. If you continue to ignore the low battery warnings, the Notebook PC eventually enters suspend mode (Windows default uses STR).

Right-click the battery icon

Pointer over the battery icon without power adapter.

Left-click the battery icon

Pointer over the battery icon with power adapter.

WARNING! Suspend-to-RAM (STR) does not last long when the battery power is depleted. STR is not the same as power OFF.

STR requires a small amount of power and will fail and lose data if no power is available due to complete battery depletion or no power supply (e.g. removing both the power adapter and battery pack).

34



Charging the Battery Pack

Before you use your Notebook PC on the road, you will have to charge the battery pack. The battery pack begins to charge as soon as the Notebook PC is connected to external power using the power adapter. Fully charge the battery pack before using it for the first time. A new battery pack must completely charge before the

Notebook PC is disconnected from external power. It takes a few hours to fully charge the battery when the Notebook PC is turned

OFF and may take twice the time when the Notebook PC is turned

ON. The battery status indicator on the Notebook PC turns OFF when the battery pack is charged.

The battery starts charging when the charge remaining in the battery drops below 95%. This prevents the battery from charging frequently. Minimizing the recharge cycles helps prolong battery life.

The battery stops charging if the temperature is too high or the battery voltage is too high.

WARNING! DO NOT leave the battery pack discharged. The battery pack will discharge over time. If not using a battery pack, it must continued to be charged every three months to extend recovery capacity or else it may fail to charge in the future.



35

Power Options

The power switch turns ON and

OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows

Control Panel “Power Options.”

For other options, such as “Switch

User, Restart, Sleep, or Shut Down,” click the arrowhead next to the lock icon.

Restarting or Rebooting

After making changes to your operating system, you may be prompted to restart the system. Some installation processes will provide a dialog box to allow restart. To restart the system manually, choose

Restart

.

IMPORTANT! To protect the hard drive, wait at least 5 seconds after turning OFF your Notebook PC before turning it back ON.

36



Emergency Shutdown

In case your operating system cannot properly turn OFF or restart, there are two additional ways to shutdown your Notebook PC:

• Hold the power button over

4 seconds.

• Press the shutdown button on the bottom.

Use a straightened paper clip to press the shutdown button.

IMPORTANT! DO NOT use emergency shutdown while data is being written; doing so can result in loss or destruction of your data.



37

Power Management Modes

The Notebook PC has a number of automatic or adjustable power saving features that you can use to maximize battery life and lower

Total Cost of Ownership (TCO). You can control some of these features through the Power menu in the BIOS Setup. ACPI power management settings are made through the operating system.

The power management features are designed to save as much electricity as possible by putting components into a low power consumption mode as often as possible but also allow full operation on demand.

Sleep and Hibernate

Power management settings can be found in the

Windows

>

Control Panel

>

Hardware and Sound

>

Power Options

. In

Power Options

, you can define

“Sleep/Hibernate” or “Shut Down” for closing the display panel or pressing the power button.

“Sleep” and “Hibernate” saves power when your Notebook PC is not in use by turning OFF certain components. When you resume your work, your last status (such as a document scrolled down half way or email typed half way) will reappear as if you never left. “Shut Down” will close all applications and ask if you want to save your work if any are not saved.

Sleep

is the same as Suspend-to-

RAM (STR). This function stores your current data and status in

RAM while many components are turned OFF. Because RAM is volatile, it requires power to keep (refresh) the data. Click the

Windows

button and the arrowhead next to the lock icon to see this option. You can also use the keyboard shortcut [

Fn F1

] to activate this mode. Recover by pressing any keyboard key except

[Fn]. (NOTE: The power indicator will blink in this mode.)

38



Hibernate

is the same as Suspend-to-Disk (STD) and stores your current data and status on the hard disk drive. By doing this, RAM does not have to be periodically refreshed and power consumption is greatly reduced but not completely eliminated because certain wake-up components like LAN needs to remain powered.

“Hibernate” saves more power compared to “Sleep”. Click the

Start

button and the arrowhead next to the lock icon to see this option.

Recover by pressing the power button. (NOTE: The power indicator will be OFF in this mode.)

Thermal Power Control

There are three power control methods for controlling the Notebook

PC’s thermal state. These power control cannot be configured by the user and should be known in case the Notebook PC should enter these states. The following temperatures represent the chassis temperature (not CPU).

• The fan turns ON for active cooling when the temperature reaches the safe upper limit.

• The CPU decreases speed for passive cooling when the temperature exceeds the safe upper limit.

• The system shut down for critical cooling when temperature exceeds the maximum safe upper limit.



39

Special Keyboard Functions

Colored Hot Keys

The following defines the colored hot keys on the Notebook PC’s keyboard. The colored commands can only be accessed by first pressing and holding the function key while pressing a key with a colored command.

The Hot Key locations on the function keys may vary depending on model but the functions should remain the same. Follow the icons instead of the function keys.

“Z

Z

” Icon (F1):

Places the Notebook PC in suspend mode

(either Save-to-RAM or Save-to-Disk depending on sleep button setting in power management setup).

Radio Tower (F2):

Wireless Models Only: Toggles the internal wireless LAN or Bluetooth (on selected models)

ON or OFF with an on-screen-display. When enabled, the corresponding wireless indicator will light. Windows software settings are necessary to use the wireless LAN or Bluetooth.

Sun Down Icon (F5):

Decreases the display brightness

Sun Up Icon (F6):

Increases the display brightness

LCD Icon (F7):

Toggles the display panel ON and OFF. (On certain models; stretches the screen area to fill the entire display when using low resolution modes.)

40



LCD/Monitor Icons (F8):

Toggles between the Notebook

PC’s LCD display and an external monitor in this series:

LCD Only -> CRT Only (External Monitor) -> LCD + CRT

Clone -> LCD + CRT Extend. (This function does not work in 256 Colors, select High Color in Display Property

Settings.)

NOTE: Must connect an external monitor

“before” booting up.

Crossed-out Touchpad (F9)

: Toggles the built-in touchpad LOCKED (disabled) and UNLOCKED (enabled).

Locking the touchpad will prevent you from accidentally moving the pointer while typing and is best used with an external pointing device such as a mouse. NOTE: Selected models have an indicator between the touchpad buttons will light when the touchpad is UNLOCKED (enabled) and not light when the touchpad is LOCKED (disabled).

Crossed Speaker Icons (F10):

Toggles the speakers ON and OFF (only in Windows OS)

Speaker Down Icon (F11):

Decreases the speaker volume (only in Windows OS)

Speaker Up Icon (F12):

Increases the speaker volume (only in Windows OS)

Fn+C:

Toggles “Splendid Video Intelligent Technology” function ON and OFF. This allows switching between different display color enhancement modes in order to improve contrast, brightness, skin tone, and color saturation for red, green, and blue independently. You can see the current mode through the onscreen display

(OSD).

Fn+V:

Toggles “Life Frame” software application.



41

Fn+A (on selected models):

Toggles the light sensor ON and OFF

Power4Gear Hybrid (Fn+Space Bar):

This key toggles power savings between various power saving modes.

The power saving modes control many aspects of the

Notebook PC to maximize performance versus battery time. Applying or removing the power adapter will automatically switch the system between AC mode and battery mode. You can see the current mode through the on-screen display (OSD).

Microsoft Windows Keys

There are two special Windows keys on the keyboard as described below.

The key with the Windows Logo activates the Start menu located at the bottom left of the Windows desktop.

The other key, that looks like a Windows menu with a small pointer, activates the properties menu and is equivalent to pressing the right mouse button on a

Windows object.

42



Keyboard as a Numeric Keypad

The numeric keypad is embedded in the keyboard and consists of 15 keys that make number intensive input more convenient.

These dual-purpose keys are labeled in orange on the key caps.

Numeric assignments are located at the upper right hand corner of each key as shown in the figure. When the numeric keypad is engaged by pressing [

Fn

][

Ins/Num LK

], the number lock LED lights up. If an external keyboard is connected, pressing the [

Ins/Num LK

] on the external keyboard enables/disables the NumLock on both keyboards simultaneously.

To disable the numeric keypad while keeping the keypad on an external keyboard activated, press the

[

Fn

][

Ins/Num LK

] keys on the

Notebook PC.

Keyboard as Pointers

The keyboard can be used as pointers while Number Lock is ON or

OFF in order to increase navigation ease while entering numeric data in spreadsheets or similar applications.

With Number Lock OFF

, press [

Fn

] and one of the pointer keys shown below. For example [

Fn

][

8

] for up, [

Fn

][K] for down, [

Fn

][

U

] for left, and [

Fn

][

O

] for right.

With Number Lock ON

, use [

Shift

] and one of the pointer keys shown below.

For example [

Shift

][

8

] for up,

[

Shift

][

K

] for down, [

Shift

][

U

] for left, and [

Shift

][

O

] for right.



43

Multimedia Control Keys (on selected models)

The multimedia control keys allows for convenient controlling of the multimedia application. The following defines the meaning of each multimedia control key on the Notebook PC.

Some control key functions may defer depending on Notebook

PC model.

Use the [Fn] key in combination with the arrow keys for CD control functions.

CD Play/Pause

During CD stop, begins CD play.

During CD play, pauses CD play.

CD Stop

During CD play: Stops CD play.

CD Skip to Previous Track (Rewind)

During CD play, skips to the previous audio track/ movie chapter.

CD Skip to Next Track (Fast Forward)

During CD play, skips to the next audio track/movie chapter.

44



Switches and Status Indicators

Switches

Splendid Key

Toggles “Splendid Video Intelligent Technology” function ON and OFF. This allows switching between different display color enhancement modes in order to improve contrast, brightness, skin tone, and color saturation for red, green, and blue independently. The selected mode is shown on the display.

Power4Gear Hybrid Key

The Power4Gear Hybrid key toggles power savings between various power saving modes. The power saving modes control many aspects of the Notebook PC to maximize performance versus battery time. Applying or removing the power adapter will automatically switch the system between AC mode and battery mode. The selected mode is shown on the display.

Touchpad Lock Key

Pressing this button will lock (disable) the built-in touchpad.

Locking the touchpad will prevent you from accidentally moving the pointer while typing and is best used with an external mouse (pointing device). To unlock (enable) the touchpad, simply press this button again.



45

Express Gate Key

Pressing this button will launch Express Gate when the

Notebook PC is powered off. Refer to the Express Gate User’s

Manual for details.

Power Switch

The power switch turns ON and OFF the Notebook PC or putting the Notebook PC into sleep or hibernation modes. Actual behavior of the power switch can be customized in Windows

Control Panel “Power Options.”

46



Status Indicators

Front

Top

Power Indicator

The power indicator lights when the Notebook PC is turned ON and blinks slowly when the Notebook PC is in the Suspend-to-

RAM (Sleep) mode. This indicator is OFF when the Notebook PC is turned OFF or in the Suspend-to-Disk (Hibernation) mode.

Battery Charge Indicator (dual-color)

The dual-color battery charge indicator shows the status of the battery’s power as follows:

Green ON: Battery power is between 95% and 100% (with AC power).

Orange ON: Battery power is between 11% and 94% (with AC power).

Orange Blinking: Battery power is less than 10% (with or without AC power).



47

Bluetooth Indicator

This is only applicable on models with internal Bluetooth (BT).

This indicator will light to show that the Notebook PC’s built-in

Bluetooth (BT) function is activated. (Windows software settings are necessary.)

Wireless Indicator

This is only applicable on models with built-in wireless LAN.

This indicator will light to show that the Notebook PC’s builtin wireless LAN is enabled. (Windows software settings are necessary.)

Drive Activity Indicator

Indicates that the Notebook PC is accessing one or more storage device(s) such as the hard disk. The light flashes proportional to the access time.

Number Lock Indicator

Indicates that number lock [Num Lk] is activated when lighted.

Number lock allows some of the keyboard letters to act as numbers for easier numeric data input.

Capital Lock Indicator

Indicates that capital lock [Caps Lock] is activated when lighted.

Capital lock allows some of the keyboard letters to type using capitalized letters (e.g. A, B, C). When the capital lock light is OFF, the typed letters will be in the lower case form (e.g. a,b,c).

48



Chapter 4:

4


Pointing Device

The Notebook PC’s integrated touchpad pointing device is fully compatible with all two/three-button and scrolling knob PS/2 mice.

The touchpad is pressure sensitive and contains no moving parts; therefore, mechanical failures can be avoided. A device driver is still required for working with some application software.

Pointer

Movement

Scroll Area

Right Click

Left Click

IMPORTANT! DO NOT use any objects in place of your finger to operate the touchpad or else damage may occur to the touchpad’s surface.

50



Using the Touchpad

Light pressure with the tip of your finger is all that is required to operate the touchpad. Because the touchpad is electrostatic sensitive, objects cannot be used in place of your fingers. The touchpad’s primary function is to move the pointer around or select items displayed on the screen with the use of your fingertip instead of a standard desktop mouse. The following illustrations demonstrate proper use of the touchpad.

Moving The Pointer

Place your finger in the center of the touchpad and slide in a direction to move the pointer.

Slide finger left

Slide finger forward

Slide finger right

Slide finger backward

Scrolling (on selected models)

Slide your finger up or down on the right side to scroll a window up or down.

Scroll Up

Scroll Down



51

Touchpad Usage Illustrations

Clicking/Tapping -

With the pointer over an item, press the left button or use your fingertip to touch the touchpad lightly, keeping your finger on the touchpad until the item is selected. The selected item will change color. The following two examples produce the same results.

Clicking

Tapping

Press the left pointer button and release.

Lightly but rapidly strike the touchpad.

Double-clicking/Double-tapping -

These actions allows you to launch your selected program. Move your finger over the program that you want to launch, press the left button or tap the pad twice in rapid succession, and the system launches your selected program. If the interval between the clicks or taps is too long, the operation will not be executed. You can set the double-click speed using the Windows

Control Panel “Mouse.” The following two examples produce the same results.

Double-

Clicking

Double-

Tapping

Press the left button twice and release.

52


Lightly but rapidly strike the touchpad twice.


Dragging -

Dragging refers to moving an item to another location.

Move your finger over an item, while simultaneously pressing the left button, move the item to your desired location, then release the left button. You can also double-tap and hold the item while dragging it with your finger. The following illustrations produce the same results.

Dragging-Clicking

Dragging-Tapping

Hold left button and slide finger on touchpad.

Lightly strike the touchpad twice, sliding finger on touchpad during second strike.



53

Caring for the Touchpad

The touchpad is pressure sensitive. If not properly cared for, it can be easily damaged. Take note of the following precautions.

• Ensure the touchpad does not come into contact with dirt, liquids or grease.

• Do not touch the touchpad if your fingers are dirty or wet.

• Do not rest heavy objects on the touchpad or the touchpad buttons.

• Do not scratch the touchpad with your finger nails or any hard objects.

The touchpad responds to movement not to force. There is no need to tap the surface too hard. Tapping too hard does not increase the responsiveness of the touchpad. The touchpad responds best to light pressure.

Automatic Touchpad Disabling

Windows can automatically disable the Notebook PC’s touchpad when an external USB mouse is attached.

This feature is normally OFF, to turn ON this feature:

1. Select the option in Windows

Control Panel

>

Hardware and

Sound

>

Mouse

.

54



2. Click

Device Settings

on the top and click

Disable internal pointing device when external USB pointing device plug in

check box.

3. Click

OK

to finish the configuration.



55

Expansion Card

One 26pin Express card slot is available to support one ExpressCard/

34mm or one ExpressCard/54mm expansion card. This new interface is faster by using a serial bus supporting USB 2.0 and PCI Express instead of the slower parallel bus used in the PC card slot. (Not compatible with previous PCMCIA cards.)

Inserting an Expansion Card

1. If there is an ExpressCard socket protector, remove it using the

“Removing an ExpressCard” instructions below.

2. Insert the ExpressCard with the connector side first and label side up. Standard ExpressCards will be flush with the Notebook

PC when fully inserted.

Ensure the ExpressCard is level when inserting.

3. Carefully connect any cables or adapters needed by the

ExpressCard. Usually connectors can only be inserted in one orientation. Look for a sticker, icon, or marking on one side of the connector representing the top side.

56



Removing an Expansion Card

The ExpressCard slot does not have an eject button. Press the

ExpressCard inwards and release to eject the ExpressCard. Carefully pull the ejected ExpressCard out of the socket.



57

Optical Drive

Inserting an optical disc

1. While the Notebook PC’s power is ON, press the drive’s eject button and the tray will eject out partially.

2. Gently pull on the drive’s front panel and slide the tray completely out. Be careful not to touch the CD drive lens and other mechanisms. Make sure there are no obstructions that may get jammed under the drive’s tray.

58



3. Hold the disc by the edge and face the disc’s printed side up.

Push down on both sides of the disc’s center until the disc snaps onto the hub.

The hub should be higher than the disc when correctly mounted.

4. Slowly push the drive’s tray back in. The drive will begin reading the table of contents (TOC) on the disc. When the drive stops, the disc is ready to be used.

It is normal to hear as well as feel the CD spinning with great intensity in the CD drive while data is read.



59

Removing an optical disc

Eject the tray and gently pry the edge of the disc upwards at an angle to remove the disc from the hub.

Emergency eject

The emergency eject is located in a hole on the optical drive and is used to eject the optical drive tray in case the electronic eject does not work. Do not use the emergency eject in place of the electronic eject.

Ensure not to stab the activity indicator located in the same area.

Actual location will vary by model.

60



Using the Optical Drive

Optical discs and equipment must be handled with care because of the precise mechanics involved. Keep in mind the important safety instructions from your CD suppliers. Unlike desktop optical drives, the Notebook PC uses a hub to hold the CD in place regardless of the angle. When inserting a CD, it is important that the CD be pressed onto the center hub or else the optical drive tray will scratch the CD.

WARNING! If the CD disc is not properly locked onto the center hub, the CD can be damaged when the tray is closed. Always watch the CD closely while closing the tray slowly to prevent damage.

A CD drive letter should be present regardless of the presence of a

CD disc in the drive. After the CD is properly inserted, data can be accessed just like with hard disk drives; except that nothing can be written to or changed on the CD. Using the proper software, a CD-

RW drive or DVD+CD-RW drive can allow CD-RW discs to be used like a hard drive with writing, deleting, and editing capabilities.

Vibration is normal for all high-speed optical drives due to unbalanced CDs or CD print. To decrease vibration, use the Notebook

PC on an even surface and do not place labels on the CD.

Listening to Audio CD

The optical drives can play audio CDs, but only the DVD-ROM drive can play DVD audio. Insert the audio CD and Windows automatically opens an audio player and begins playing. Depending on the DVD audio disc and installed software, it may require that you open a

DVD player to listen to DVD audio. You can adjust the volume using hotkeys or Windows speaker icon in the Notification area.



61

Flash Memory Card Reader

Normally a memory card reader must be purchased separately in order to use memory cards from devices such as digital cameras,

MP3 players, mobile phones, and PDAs. This Notebook PC has a single built-in memory card reader that can use many flash memory cards as shown in the example below. The built-in memory card reader is not only convenient, but also faster than most other forms of memory card readers because it utilizes the internal highbandwidth PCI bus.

IMPORTANT! Flash memory card compatibility varies depending on Notebook PC model and flash memory card specifications.

Flash memory card specifications constantly change so compatibility may change without warning.

SD / MMC

MS / MS Pro

IMPORTANT! Never remove cards while or immediately after reading, copying, formatting, or deleting data on the card or else data loss may occur.

WARNING! To prevent data loss, use “Windows Safely Remove

Hardware” in the Windows notification area before removing the flash memory card.

62



Hard Disk Drive

Hard disk drives have higher capacities and operate at much faster speeds than floppy disk drives and optical drives. The Notebook

PC comes with a replaceable hard disk drive. Current hard drives support S.M.A.R.T. (Self Monitoring and Reporting Technology) to detect hard disk errors or failures before they happen. When replacing or upgrading the hard drive, always visit an authorized service center or retailer for this Notebook PC.

IMPORTANT! Poor handling of the Notebook PC may damage the hard disk drive. Handle the Notebook PC gently and keep it away from static electricity and strong vibrations or impact. The hard disk drive is the most delicate component and will likely be the first or only component that is damaged if the Notebook PC is dropped.

IMPORTANT! When replacing or upgrading the hard drive, always visit an authorized service center or retailer for this Notebook PC.

WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector

(such as external power supply, battery pack, etc.) before removing the hard disk cover.



63

Removing the hard disk drives

Installing the hard disk drives

64



Memory (RAM)

Additional memory will increase application performance by decreasing hard disk access. Visit an authorized service center or retailer for information on memory upgrades for your Notebook PC.

Only purchase expansion modules from authorized retailers of this

Notebook PC to ensure maximum compatibility and reliability.

The BIOS automatically detects the amount of memory in the system and configures CMOS accordingly during the POST (Power-

On-Self-Test) process. There is no hardware or software (including

BIOS) setup required after the memory is installed.

WARNING! Disconnect all the connected peripherals, any telephone or telecommunication lines and power connector

(such as external power supply, battery pack, etc.) before installing or removing a memory.

Installing a Memory Card:

Removing a Memory Card:

3

3

(This is only an example.)



(This is only an example.)

65

Connections

The built-in network cannot be installed later as an upgrade.

After purchase, network can be installed as an expansion card.

Network Connection

Connect a network cable, with RJ-45 connectors on each end, to the modem/network port on the Notebook PC and the other end to a hub or switch. For 100 BASE-TX / 1000 BASE-T speeds, your network cable must be category 5 or better (not category 3) with twisted-pair wiring. If you plan on running the interface at 100/1000Mbps, it must be connected to a 100 BASE-TX / 1000 BASE-T hub (not a BASE-T4 hub). For 10Base-T, use category 3, 4, or 5 twisted-pair wiring. 10/100

Mbps Full-Duplex is supported on this Notebook PC but requires connection to a network switching hub with “duplex” enabled. The software default is to use the fastest setting so no user-intervention is required.

1000BASE-T (or Gigabit) is only supported on selected models.

66



Twisted-Pair Cable

The cable used to connect the Ethernet card to a host (generally a Hub or Switch) is called a straight-through Twisted Pair Ethernet

(TPE). The end connectors are called RJ-45 connectors, which are not compatible with RJ-11 telephone connectors. If connecting two computers together without a hub in between, a crossover LAN cable is required (Fast-Ethernet model). (Gigabit models support auto-crossover so a crossover LAN cable is optional.)

Example of the Notebook PC connected to a Network Hub or Switch for use with the built-in Ethernet controller.

Network cable with RJ-45 connectors

Network Hub or Switch



67

Wireless LAN Connection (on selected models)

The optional built-in wireless LAN is a compact easy-to-use wireless

Ethernet adapter. Implementing the IEEE 802.11 standard for wireless LAN (WLAN), the optional built-in wireless LAN is capable of fast data transmission rates using Direct Sequence Spread Spectrum

(DSSS) and Orthogonal Frequency Division Multiplexing (OFDM) technologies on 2.4GHz/5GHz frequencies. The optional built-in wireless LAN is backward compatible with the earlier IEEE 802.11 standards allowing seamless interfacing of wireless LAN standards.

The optional built-in wireless LAN is a client adapter that supports

Infrastructure and Ad-hoc modes giving you flexibility on your existing or future wireless network configurations for distances up to

40 meters between the client and the access point.

To provide efficient security to your wireless communication, the optional built-in wireless LAN comes with a 64-bit/128-bit Wired

Equivalent Privacy (WEP) encryption and Wi-Fi Protected Access

(WPA) features.

For security concerns, DO NOT connect to the unsecured network; otherwise, the information transmission without encryption might be visible to others.

68



Ad-hoc mode

The Ad-hoc mode allows the Notebook PC to connect to another wireless device. No access point (AP) is required in this wireless environment.

(All devices must install optional 802.11 wireless

LAN adapters.)

Notebook PC Desktop PC

PDA

Infrastructure mode

The Infrastructure mode allows the Notebook PC and other wireless devices to join a wireless network created by an Access Point (AP)

(sold separately) that provides a central link for wireless clients to communicate with each other or with a wired network.

(All devices must install optional 802.11 wireless

LAN adapters.)

Notebook PC Desktop PC

Access Point

PDA



69

Windows Wireless Network Connection

Connecting to a network

1. Switch ON the Wireless function if necessary for your model (see switches in Section 3).

2. Press [FN+F2] repeatedly until wireless LAN icon and

Bluetooth icon are shown.

Or double click the Wireless

Console icon in Windows notification area and select the wireless LAN icon.

3. Click the wireless network icon with an orange star in the

Windows® Notification area.

4. Select the wireless access point you want to connect to from the list and click

Connect

to build the connection.

If you cannot find the desired access point, click the

Refresh

icon on the upper right corner to refresh and search in the list again.

70



5. When connecting, you may have to enter a password.

6. After a connection has been established, the connection is shown on the list.

7. You can see the wireless network icon in the Notification area.

The crossed wireless network icon appears when you press

<Fn> + <F2> to disable the WLAN function.



71

Bluetooth Wireless Connection

(on selected models)

Notebook PCs with Bluetooth technology eliminates the need for cables for connecting Bluetooth-enabled devices. Examples of

Bluetooth-enabled devices may be Notebook PCs, Desktop PCs, mobile phones, and PDAs.

If your Notebook PC did not come with built-in Bluetooth, you need to connect a USB or ExpressCard Bluetooth module in order to use Bluetooth.

Bluetooth-enabled mobile phones

You can wireless connect to your mobile phone. Depending on your mobile phone’s capabilities, you can transfer phone book data, photos, sound files, etc. or use it as a modem to connect to the

Internet. You may also use it for SMS messaging.

Bluetooth-enabled computers or PDAs

You can wireless connect to another computer or PDA and exchange files, share peripherals, or share Internet or network connections.

You may also make use of Bluetooth-enabled wireless keyboard or mouse.

Turning ON and Launching Bluetooth Utility

This process can be used to add most Bluetooth devices.

1. Switch ON the Wireless function if necessary for your model (see switches in Section 3).

2. Press [FN+F2] repeatedly until wireless LAN icon and bluetooth icon are shown.

72



Or double click the Wireless

Console icon in the Windows notification area and select the

Bluetooth icon.

3. From

Control Panel,

go to

Network and Internet

> Network and Sharing

Center

and then click

Change adapter settings

in the left blue pane.

4. Right-click

Bluetooth

Network Connection

and select

View Bluetooth

Network Devices.

5. Click

Add a device

to look for new devices

.



73

6. Select a Bluetooth-enabled device from the list and click

Next

.

7. Enter the Bluetooth security code into your device and start pairing.

8. The paired relationship is successfully built. Click

Close

to finish the setting.

74



Antenna Connections (on selected models)

This page shows multimedia connections for TV Tuner Models. TV and radio features require built-in modules only on selected models.

IMPORTANT! The Notebook PC must be used indoors when using the antenna.

Cable connection

Connect the coaxial cable from a paid television service, roofmounted aerial antenna, or indoor “rabbit ears” to the cable adapter.

Cable service connection can receive analog TV depending on paid services. The provided adapter is necessary to change the coaxial plug to fit the slim Notebook PC. Attach an NTSC to PAL adapter if necessary.

Use an NTSC to PAL adapter if necessary.

IMPORTANT! Cable distribution system should be grounded

(earthed) in accordance with ANSI/NFPA 70, the National

Electrical Code (NEC), in particular Section 820.93, Grounding of

Outer Conductive Shield of a Coaxial Cable – installation should include bonding the screen of the coaxial cable to the earth at the building entrance.



75

DTV antenna connection

Connect the provided digital TV antenna to the Notebook PC using the cable adapter. The digital TV antenna can only receive digital TV signals broadcasted in selected regions.

Digital television reception is available on selected models only and will vary by location depending on distance from transmission towers and obstructions.

Antenna placement

Horizontal:

Can be safely placed on flat surfaces such as table tops, cabinets, and shelves.

Vertical:

Magnets in base allows attachment to metallic surfaces such as partitions or cabinets.

76




Optional Accessories

These items, if desired, come as optional items to complement your

Notebook PC.

USB Hub (Optional)

Attaching an optional USB hub will increase your USB ports and allow you to quickly connect or disconnect many USB peripherals through a single cable.

USB Flash Memory Disk

A USB flash memory disk is an optional item that can provide storage up to several hundred megabytes, higher transfer speeds, and greater durability. When used in current operating systems, no drivers are necessary.

USB Floppy Disk Drive

An optional USB-interface floppy disk drive can accept a standard

1.44MB (or 720KB) 3.5-inch floppy diskette.

WARNING! To prevent system failures, use Windows “Safely

Remove Hardware” on the taskbar before disconnecting the USB floppy disk drive. Eject the floppy disk before transporting the

Notebook PC to prevent damage from shock.

Optional Connections

These items, if desired, may be purchased from third-parties.

USB Keyboard and Mouse

Attaching an external USB keyboard will allow data entry to be more comfortable. Attaching an external USB mouse will allow Windows navigation to be more comfortable. Both the external USB keyboard and mouse will work simultaneously with the Notebook PC’s built-in keyboard and touchpad.

Printer Connection

One or more USB printers can be simultaneously used on any USB port or USB hub.

A-2



Operating System and Software

This Notebook PC may offer (depending on territory) its customers the choice of a pre-installed

Microsoft Windows

operating system.

The choices and languages will depend on the territory. The levels of hardware and software support may vary depending on the installed operating system. The stability and compatibility of other operating systems cannot be guaranteed.

Support Software

This Notebook PC comes with a support disc that provides BIOS, drivers and applications to enable hardware features, extend functionality, help manage your Notebook PC, or add functionality not provided by the native operating system. If updates or replacement of the support disc is necessary, contact your dealer for web sites to download individual software drivers and utilities.

The support disc contains all drivers, utilities and software for all popular operating systems including those that have been preinstalled. The support disc does not include the operating system itself. The support disc is necessary even if your Notebook PC came pre-configured in order to provide additional software not included as part of the factory pre-install.

A recovery disc is optional and includes an image of the original operating system installed on the hard drive at the factory. The recovery disc provides a comprehensive recovery solution that quickly restores the Notebook PC’s operating system to its original working state provided that your hard disk drive is in good working order. Contact your retailer if you require such a solution.

Some of the Notebook PC’s components and features may not work until the device drivers and utilities are installed.



A-3

System BIOS Settings

Boot Device

1. On the Boot screen, select Boot Device Priority.

BIOS SETUP UTILITY

Main Advanced Security Power Boot Exit

Boot Settings

Specifies the Boot

Device Boot Priority sequence.

Boot Settings Configuration

Boot Device Priority

Hard Disk Drives

Onboard LAN Boot ROM [Disabled]

A virtual floppy disk drive (Floppy Drive B:

) may appear when you set the CD-ROM drive as the first boot device.

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F10 Save and Exit

ESC Exit v02.59 (C)Copyright 1985-2005, American Megatrends, Inc.

2. Select each item and press [Enter] to select a device.

Boot Device Priority

1st Boot Device

2nd Boot Device

3rd Boot Device

4th Boot Device


[Hard Drive]

[CD/DVD]

[Removable Device]

[Network]

Boot

Specifies the boot sequence from the availabe devices.

A device enclosed in parenthesis has been disabled in the corresponding type menu.

Select Screen

Select Item

+-

Change Option

F1 General Help



A-4



Security Setting

To set the password:

1. On the

Security

screen, select

Change Supervisor

or

Change

User Password

.

2. Type in a password and press [Enter].

3. Re-type to confirm the password and press [Enter].

4. Password is then set.


Security

Security Settings

Supervisor Password : Not Installed

User Password : Not Installed

Change Supervisor Password

Change User Password

Install or Change the password.

I/O Interface Security

Select Screen

Select Item

Enter Change

F1 General Help



To clear the password:

1. Leave the password field blank and press [Enter].

2. Password is then cleared.



A-5

Password Check

Select whether to ask for a password during bootup (Always) or only when entering the BIOS setup utility (Setup).


Security Security


Supervisor Password : Installed

User Password : Installed


User Access Level


Clear User Password

Password Check

[Full Access]

Always

Setup

Setup: Check password while invoking setup.

Always: Check password while invoking setup as well as on each boot.

Select Screen

Select Item

Enter Change

F1 General Help




Select the level of access to allow the “User Password” to have in the

BIOS setup utility.


Security


Supervisor Password : Installed

User Password : Installed




Clear User Password

Password Check

[Full Access]

Options

View Only

Limited

Full Access

Setup: Check password while invoking setup.

Always: Check password while invoking setup as well as on each boot.

Select Screen

Select Item

Enter Change

F1 General Help



A-6



Save Changes

If you want to keep your configuration settings, you must save changes before exiting the BIOS setup utility.

If you want to restore default settings, choose

Load Setup Defaults

.

You must then save changes to keep the manufacture default settings.


Exit

Exit Options

Exit system setup after saving the changes.

Save Changes and Exit

Discard Changes and Exit

Discard Changes

F10 key can be used for this operation.

Load User Defaults

Load Manufacture Defaults

Select Screen

Select Item

Enter Change

F1 General Help





A-7

Common Problems and Solutions

Hardware Problem - Optical Disc

The optical disc drive is not able to read or write discs.

1. Update the BIOS to the latest version and try again.

2. If updating the BIOS does not help, try better quality discs and try again.

3. If the problem still exist, contact your local service center and ask an engineer for assistance.

Unknown Reason - System Unstable

Cannot wake up from the hibernation.

1. Remove upgraded parts (RAM, HDD, WLAN, BT) if they were installed after purchase.

2. If not the case, try MS System Restore to an earlier date.

3. If problem still persists, try restoring your system using the recovery partition or DVD.

You must backup all your data to another location before recovering.


Hardware Problem - Keyboard / Hotkey

The Hotkey (FN) is disabled.

A. Reinstall the “ATK0100” driver from the driver CD or download it from the ASUS website.

A-8



Hardware Problem - Built-in Camera

The built-in camera does not work correctly.

1. Check “Device Manager” to see if there are any problems.

2. Try reinstalling the webcam driver to solve the problem.

3. If the problem is not solved, update the BIOS to the latest version and try again.


Hardware Problem - Battery

Battery maintenance.

1. Register the Notebook PC for a one-year-warranty using the following website:

http://member.asus.com/login.aspx?SLanguage=en-us

2. Do NOT remove the battery pack while using the Notebook

PC with the AC adaptor to prevent damage caused by the accidental power loss. The ASUS battery pack has protection circuitry to prevent over-charging so it will not damage the battery pack if it is left in the Notebook PC.

Hardware Problem - Power ON/OFF Error

I cannot power ON the Notebook PC.

Diagnostics:

1. Power On by Battery only? (Y = 2, N = 4)

2. Able to see BIOS (ASUS Logo)? (Y = 3, N = A)

3. Able to load the OS? (Y = B, N = A)

4. Adapter power LED ON? (Y = 5, N = C)

5. Power ON by Adapter only? (Y = 6, N = A)

6. Able to see BIOS (ASUS Logo)? (Y = 7, N = A)



A-9

7. Able to load the OS? (Y = D, N = A)

Symptom & Solutions:

A. Problem might be in the MB, HDD, or NB; visit a local service center for assistance.

B. Problem caused by the operating system, try restoring your system using the recovery partition or disc.

IMPORTANT! You must backup all your data to another location before recovering.

C. Adapter problem; check the power cord connections, otherwise visit a local service center for replacement.

Hardware Problem - Wireless Card

How to check whether a Notebook PC is equipped with a wireless card?

A. Enter

Control Panel

->

Device Manager

. You will see whether the Notebook PC has a WLAN card under the “Network Adapter” item.

Mechanical Problem - FAN / Thermal

Why is the cooling fan always ON and the temperature high?

1. Make sure that the FAN works when the CPU temperature is high and check whether there is air flow from the main air vent.

2. If you have many applications running (see taskbar), close them to decrease system load.

3. The problem may also be caused by some viruses, use anti-virus software to detect them.

4. If none of the above help, try restoring your system using the recovery partition or DVD.


A-10



CAUTION! DO NOT connect to the Internet before you have installed an anti-virus software and Internet firewall to protect yourself from viruses.

Software Problem - ASUS bundled software

When I power ON the Notebook PC, there will be an “Open policy file error” message.

A. Reinstall the latest version “Power4 Gear” utility to solve your problem. It is available on the ASUS website.

Unknown Reason - Blue screen with white text

A blue screen with white text appears after system bootup.

1. Remove additional memory. If additional memory was installed after purchase, power OFF, remove the additional memory, and power ON to see if the problem is due to incompatible memory.

2. Un-install software applications. If you have installed software applications recently, they may not be compatible with your system. Try to un-install them in Windows Safe Mode.

3. Check your system for viruses.

4. Update the BIOS to the latest version with Easy Flash in

Windows or AFLASH in DOS mode. These utilities and BIOS files can be downloaded from the ASUS website.

WARNING! Ensure your Notebook PC does not lose power during the BIOS flashing process.



A-11

5. If problem still cannot be solved, use the recovery process to reinstall your entire system.


CAUTION! DO NOT connect to the Internet before you have installed an anti-virus software and Internet firewall to protect yourself from viruses.

Ensure that you install the “Intel INF Update” and “ATKACPI” drivers first so that hardware devices can be recognized.


A-12



Software Problem - BIOS

Updating the BIOS.

1. Please verify the Notebook PC’s exact model and download the latest BIOS file for your model from the ASUS website and save it in your flash disk drive.

2. Connect your flash disk drive to the Notebook PC and power on the Notebook PC.

3. Use the “Easy Flash” function on the Advanced page of the BIOS

Setup Utility. Follow the instructions shown.


Main Advanced Security Power Boot Exit

Advanced Settings

WARNING: Setting wrong values in below sections

may cause system to malfunction.

IDE Configuration

Start Easy Flash

ASUS FancyStart

Internal Pointing Device

Start Easy Flash Utility?

Internal Numeric Pad Lock

Speaker Volume

Intel Virtualization Tech

Intel VT-d

[Disabled]

[OK] [Cancel]

[4]

[Disabled]

Over-Clock in POST [0%]

DTS-based Thermal Management [Enabled]

Press ENTER to run the utility to select and update BIOS.

Press Hotkey F4 at

POST to invoke the

Utility. This utility doesn't support :

1. CDROM

2. USB HDD

3. Secondary HDD

Select Screen

Select Item

Enter Change

F1 General Help



4. Locate the latest BIOS file and start updating (flashing) the BIOS.

AsusTek BIOS ROM Easy Flash Utility V1.15

FLASH TYPE: MXIC MX25L8005

Current ROM

PLATFORM: G60J

VER: 002.T22

DATE: 03/24/09

Update ROM

PLATFORM:

VER:

DATE:

Unknown

Unknown

Unknown

PATH: A:\

Drive

A :

B :

C :

:

File

Note

<Up/Dn> to move ,<Enter> to determine ,<BSpace> to drive select

5. You must “Load Setup Defaults” on the Exit page after updating

(flashing) the BIOS.



A-13

Recovering Your Notebook PC

Using Recovery Partition

The Recovery Partition quickly restores your Notebook PC’s software to its original working state. Before using the Recovery Partition, copy your data files (such as Outlook PST files) to USB fiash disks or to a network drive and make note of any customized configuration settings (such as network settings).

About the Recovery Partition

The Recovery Partition is a reserved space on your hard disk drive used to restore the operating system, drivers, and utilities installed on your Notebook PC at the factory.

IMPORTANT! DO NOT delete the partition named

RECOVERY

.

The Recovery Partition is created at the factory and cannot be restored if deleted. Take your Notebook PC to an authorized ASUS service center if you have problems with the recovery process.

Using the Recovery Partition:

1. Press [F9] during bootup.

2. Press [Enter] to select Windows Setup [EMS Enabled].

3. Read the

ASUS Preload Wizard

screen and click

Next

.

4. Select a partition option and click

Next

. Partition options:

Recover Windows to first partition only.

This option deletes only the first partition and allows you to keep other partitions, and to create a new system partition as drive “C”.

Recover Windows to entire HD.

This option deletes all partitions from your hard disk drive and creates a new system partition as drive “C”.

A-14



Recover Windows to entire HD with 2 partition.

This option deletes all partitions from your hard drive and creates two new partitions “C” (60%) and “D” (40%).

5. Follow the onscreen instructions to complete the recovery process.

Visit the ASUS website at www.asus.com for updated drivers and utilities.

Using Recovery DVD (on selected models)

Before using the recovery DVD to recover your Notebook PC, you need the following items.

• A USB 2.0 DVD-ROM

• Three blank writable DVDs.

Creating the Recovery DVD:

1. Double-click the

AI Recovery Burner

icon on the Window desktop.

2. Insert a blank writable DVD into the optical drive and click

Start

to start creating the Recovery DVD.

3. Follow the onscreen instructions to complete creating the recovery DVD.

IMPORTANT! Remove the external hard disk drive before performing system recovery on your Notebook PC. According to Microsoft, you may lose important data because of setting up Windows Vista on the wrong disk drive or formatting the incorrect drive partition. Refer to http://support.microsoft.com/ kb/937251/en-us for more details.



A-15

1. Insert the Recovery DVD into the optical drive. Your Notebook

PC needs to be powered ON.

2. Restart the Notebook PC and press [Esc] on bootup and select the optical drive (may be labeled as “CD/DVD”) and press [Enter] to boot from the Recovery DVD.

3. Select a partition option and click

Next

. Partition options:

Recover Windows to first partition only.

This option deletes only the first partition and allows you to keep other partitions, and to create a new system partition as drive “C”.

Recover Windows to entire HD.

This option deletes all partitions from your hard disk drive and creates a new system partition as drive “C”.

Recover Windows to entire HD with 2 partition.

This option deletes all partitions from your hard drive and creates two new partitions “C” (60%) and “D” (40%).

4. Follow the onscreen instructions to complete the recovery process.

WARNING: Do not remove the Recovery disc, unless instructed to do so, during the recovery process or else your partitions will be unusable.

Visit the ASUS website at www.asus.com for updated drivers and utilities.

A-16



DVD-ROM Drive Information

The Notebook PC comes with an optional DVD-ROM drive or a

CD-ROM drive. In order to view DVD titles, you must install your own DVD viewer software. Optional DVD viewer software may be purchased with this Notebook PC. The DVD-ROM drive allows the use of both CD and DVD discs.

Regional Playback Information

Playback of DVD movie titles involves decoding MPEG2 video, digital

AC3 audio and decryption of CSS protected content. CSS (sometimes called copy guard) is the name given to the content protection scheme adopted by the motion picture industry to satisfy a need to protect against unlawful content duplication.

Although the design rules imposed on CSS licensors are many, one rule that is most relevant is playback restrictions on regionalized content. In order to facilitate geographically staggered movie releases, DVD video titles are released for specific geographic regions as defined in “Region

Definitions” below. Copyright laws require that all DVD movies be limited to a particular region (usually coded to the region at which it is sold). While DVD movie content may be released for multiple regions,

CSS design rules require that any system capable of playing CSS encrypted content must only be capable of playing one region.

The region setting may be changed up to five times using the viewer software, then it can only play DVD movies for the last region setting. Changing the region code after that will require factory resetting which is not covered by warranty. If resetting is desired, shipping and resetting costs will be at the expense of the user.



A-17

Region Definitions

Region 1

Canada, US, US Territories

Region 2

Czech, Egypt, Finland, France, Germany, Gulf States, Hungary, Iceland,

Iran, Iraq, Ireland, Italy, Japan, Netherlands, Norway, Poland, Portugal,

Saudi Arabia, Scotland, South Africa, Spain, Sweden, Switzerland,

Syria, Turkey, UK, Greece, Former Yugoslav Republics, Slovakia

Region 3

Burma, Indonesia, South Korea, Malaysia, Philippines, Singapore,

Taiwan, Thailand, Vietnam

Region 4

Australia, Caribbean (Except US Territories), Central America, New

Zealand, Pacific Islands, South America

Region 5

CIS, India, Pakistan, Rest of Africa, Russia, North Korea

Region 6

China

A-18



Internal Modem Compliancy

The Notebook PC with internal modem model complies with

JATE (Japan), FCC (US, Canada, Korea, Taiwan), and CTR21. The internal modem has been approved in accordance with Council

Decision 98/482/EC for pan-European single terminal connection to the public switched telephone network (PSTN). However due to differences between the individual PSTNs provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems you should contact your equipment supplier in the first instance.

Overview

On 4th August 1998 the European Council Decision regarding the

CTR 21 has been published in the Official Journal of the EC. The CTR

21 applies to all non voice terminal equipment with DTMF-dialling which is intended to be connected to the analogue PSTN (Public

Switched Telephone Network).

CTR 21 (Common Technical Regulation) for the attachment requirements for connection to the analogue public switched telephone networks of terminal equipment (excluding terminal equipment supporting the voice telephony justified case service) in which network addressing, if provided, is by means of dual tone multifrequency signalling.

Network Compatibility Declaration

Statement to be made by the manufacturer to the Notified Body and the vendor: “This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-working difficulties”



A-19

Network Compatibility Declaration

Statement to be made by the manufacturer to the user: “This declaration will indicate the networks with which the equipment is designed to work and any notified networks with which the equipment may have inter-working difficulties. The manufacturer shall also associate a statement to make it clear where network compatibility is dependent on physical and software switch settings.

It will also advise the user to contact the vendor if it is desired to use the equipment on another network.”

Up to now the Notified Body of CETECOM issued several pan-

European approvals using CTR 21. The results are Europe’s first modems which do not require regulatory approvals in each individual European country.

Non-Voice Equipment

Answering machines and loud-speaking telephones can be eligible as well as modems, fax machines, auto-dialers and alarm systems.

Equipment in which the end-to-end quality of speech is controlled by regulations (e.g. handset telephones and in some countries also cordless telephones) is excluded.

A-20



This table shows the countries currently under the CTR21 standard.

Country

Austria 1

Belgium

Czech Republic

Denmark

Finland

France

1

Germany

Greece

Hungary

Iceland

Ireland

Italy

Israel

Lichtenstein

Luxemburg

The Netherlands 1

Norway

Poland

Portugal

Spain

Sweden

Switzerland

United Kingdom



Applied More Testing

Yes

Yes

Yes

Yes

No

No

No

Yes

Yes

Yes

Yes

Yes

No

Yes

Yes

Yes

No

No

Not Applicable

Yes

No

No

Yes

Yes

No

Yes

No

No

Not Applicable

No

Yes No

Still Pending Still Pending

No No

No

No

Yes

No

Not Applicable

Not Applicable

Not Applicable

No

No

No

A-21

This information was copied from CETECOM and is supplied without liability. For updates to this table, you may visit http://www.cetecom.

de/technologies/ctr_21.html

1 National requirements will apply only if the equipment may use pulse dialling (manufacturers may state in the user guide that the equipment is only intended to support DTMF signalling, which would make any additional testing superfluous).

In The Netherlands additional testing is required for series connection and caller ID facilities.

A-22



Declarations and Safety Statements

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:

• This device may not cause harmful interference.

• This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal

Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of a shielded-type power cord is required in order to meet FCC emission limits and to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.



A-23

(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.

Washington DC: Office of the Federal Register, National Archives and

Records Administration, U.S. Government Printing Office.)

FCC Radio Frequency (RF) Exposure Caution

Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. “The manufacture declares that this device is limited to Channels 1 through 11 in the 2.4GHz frequency by specified firmware controlled in the USA.”

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC

RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

Declaration of Conformity

(R&TTE directive 1999/5/EC)

The following items were completed and are considered relevant and sufficient:

• Essential requirements as in [Article 3]

• Protection requirements for health and safety as in [Article 3.1a]

• Testing for electric safety according to [EN 60950]

• Protection requirements for electromagnetic compatibility in

[Article 3.1b]

• Testing for electromagnetic compatibility in [EN 301 489-1] & [EN

301 489-17]

• Effective use of the radio spectrum as in [Article 3.2]

• Radio test suites according to [EN 300 328-2]

A-24



CE Marking

CE marking for devices without wireless LAN/Bluetooth

The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.

CE marking for devices with wireless LAN/ Bluetooth

This equipment complies with the requirements of Directive 1999/5/

EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.

IC Radiation Exposure Statement for Canada

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with IC

RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. End users must follow the specific operating instructions for satisfying RF exposure compliance.

Operation is subject to the following two conditions:

• This device may not cause interference and

• This device must accept any interference, including interference that may cause undesired operation of the device.

To prevent radio interference to the licensed service (i.e. co-channel

Mobile Satellite systems) this device is intended to be operated indoors and away from windows to provide maximum shielding.

Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.



A-25

Wireless Operation Channel for Different Domains

N. America

Japan

2.412-2.462 GHz

2.412-2.484 GHz

Europe ETSI 2.412-2.472 GHz

Ch01 through CH11

Ch01 through Ch14

Ch01 through Ch13

France Restricted Wireless Frequency Bands

Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are:

• 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)

• 100mW for frequencies between 2446.5 MHz and 2483.5 MHz

Channels 10 through 13 inclusive operate in the band 2446.6 MHz to

2483.5 MHz.

There are few possibilities for outdoor use: On private property or on the private property of public persons, use is subject to a preliminary authorization procedure by the Ministry of Defense, with maximum authorized power of 100mW in the 2446.5–2483.5 MHz band. Use outdoors on public property is not permitted.

In the departments listed below, for the entire 2.4 GHz band:

• Maximum authorized power indoors is 100mW

• Maximum authorized power outdoors is 10mW

Departments in which the use of the 2400–2483.5 MHz band is permitted with an EIRP of less than 100mW indoors and less than

10mW outdoors:

01 Ain 02 Aisne 03 Allier

05 Hautes Alpes 08 Ardennes 09 Ariège

11 Aude

24 Dordogne

32 Gers

12 Aveyron 16 Charente

25 Doubs

36 Indre

41 Loir et Cher 45 Loiret

26 Drôme

37 Indre et Loire

50 Manche

55 Meuse 58 Nièvre 59 Nord

A-26



60 Oise

63 Puy du Dôme

61 Orne

64 Pyrénées Atlantique

66 Pyrénées Orientales 67 Bas Rhin

68 Haut Rhin

71 Saône et Loire

70 Haute Saône

75 Paris

82 Tarn et Garonne

88 Vosges

90 Territoire de Belfort

84 Vaucluse

89 Yonne

94 Val de Marne

This requirement is likely to change over time, allowing you to use your wireless LAN card in more areas within France. Please check with ART for the latest information (www.art-telecom.fr)

Your WLAN Card transmits less than 100mW, but more than

10mW.



A-27

UL Safety Notices

Required for UL 1459 covering telecommunications (telephone) equipment intended to be electrically connected to a telecommunication network that has an operating voltage to ground that does not exceed 200V peak, 300V peak-to-peak, and

105V rms, and installed or used in accordance with the National

Electrical Code (NFPA 70).

When using the Notebook PC modem, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• DO NOT use the Notebook PC near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool.

• DO NOT use the Notebook PC during an electrical storm. There may be a remote risk of electric shock from lightning.

• DO NOT use the Notebook PC in the vicinity of a gas leak.

Required for UL 1642 covering primary (nonrechargeable) and secondary (rechargeable) lithium batteries for use as power sources in products. These batteries contain metallic lithium, or a lithium alloy, or a lithium ion, and may consist of a single electrochemical cell or two or more cells connected in series, parallel, or both, that convert chemical energy into electrical energy by an irreversible or reversible chemical reaction.

• Do not dispose the Notebook PC battery pack in a fire, as they may explode. Check with local codes for possible special disposal instructions to reduce the risk of injury to persons due to fire or explosion.

• Do not use power adapters or batteries from other devices to reduce the risk of injury to persons due to fire or explosion. Use only UL certified power adapters or batteries supplied by the manufacturer or authorized retailers.

A-28



Power Safety Requirement

Products with electrical current ratings up to 6A and weighing more than 3Kg must use approved power cords greater than or equal to:

H05VV-F, 3G, 0.75mm

2

or H05VV-F, 2G, 0.75mm

2

.

TV Tuner Notices

Note to CATV System Installer—Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National

Electrical Code (NEC), in particular Section 820.93, Grounding of

Outer Conductive Shield of a Coaxial Cable – installation should include bonding the screen of the coaxial cable to the earth at the building entrance.

REACH

Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS REACH website at http://green.asus.com/english/REACH.htm.



A-29

Nordic Lithium Cautions (for lithium-ion batteries)

CAUTION! Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. (English)

ATTENZIONE! Rischio di esplosione della batteria se sostituita in modo errato. Sostituire la batteria con un una di tipo uguale o equivalente consigliata dalla fabbrica. Non disperdere le batterie nell’ambiente. (Italian)

VORSICHT! Explosionsgefahr bei unsachgemäßen Austausch der

Batterie. Ersatz nur durch denselben oder einem vom Hersteller empfohlenem ähnlichen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. (German)

ADVARSELI! Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering.

Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. (Danish)

VARNING! Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion. (Swedish)

VAROITUS! Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan laitevalmistajan sousittelemaan tyyppiin. Hävitä käytetty paristo valmistagan ohjeiden mukaisesti. (Finnish)

ATTENTION! Il y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du mêre type ou d’un type équivalent recommandé par le constructeur.

Mettre au rebut les batteries usagées conformément aux instructions du fabricant. (French)

ADVARSEL! Eksplosjonsfare ved feilaktig skifte av batteri.

Benytt samme batteritype eller en tilsvarende type anbefalt av apparatfabrikanten. Brukte batterier kasseres i henhold til fabrikantens instruksjoner. (Norwegian)

(Japanese)

ВНИМАНИЕ! При замене аккумулятора на аккумулятор иного типа возможно его возгорание. Утилизируйте аккумулятор в соответствии с инструкциями производителя. (Russian)

A-30



Optical Drive Safety Information

Laser Safety Information

Internal or external optical drives sold with this Notebook PC contains a CLASS 1 LASER PRODUCT. Laser classifications can be found in the glossary at the end of this user’s manual.

WARNING! Making adjustments or performing procedures other than those specified in the user’s manual may result in hazardous laser exposure. Do not attempt to disassemble the optical drive. For your safety, have the optical drive serviced only by an authorized service provider.

Service warning label

CAUTION! INVISIBLE LASER RADIATION WHEN OPEN. DO

NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL

INSTRUMENTS.

CDRH Regulations

The Center for Devices and Radiological Health (CDRH) of the

U.S. Food and Drug Administration implemented regulations for laser products on August 2, 1976. These regulations apply to laser products manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.

WARNING! Use of controls or adjustments or performance of procedures other than those specified herein or in the laser product installation guide may result in hazardous radiation exposure.



A-31

Macrovision Corporation Product Notice

This product incorporates copyright protection technology that is protected by method claims of certain U.S.A. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

A-32



CTR 21 Approval

(for Notebook PC with built-in Modem)

Danish

Dutch

English

Finnish

French

German

Greek

Italian

Portuguese



A-33

Spanish

Swedish

A-34



This product is protected by one or more of the following U.S. Patents:

7,416,423; 7,415,588; 7,413,402; 7,411,791; 7,408,855; 7,403,378;

7,400,721; 7,399,011; 7,394,533; 7,392,968; 7,388,754; 7,388,752;

7,388,743; 7,382,605; 7,382,314; 7,375,952; 7,374,433; 7,373,493;

7,369,402; 7,369,064; 7,362,568; 7,362,521; 7,362,276; 7,361,034;

7,359,209; 7,359,189; 7,355,372; 7,353,408; 7,352,586; 7,343,645;

7,342,777; 7,342,193; 7,332,990; 7,328,354; 7,327,568; 7,325,241;

7,321,523; 7,319,585; 7,304,257; 7,299,479; 7,294,021; 7,294,011;

7,293,890; 7,293,273; 7,276,660; 7,267,566; 7,261,579; 7,261,573;

7,261,331; 7,259,342; 7,257,761; 7,245,488; 7,241,946; 7,234,971;

7,233,555; 7,229,000; 7,224,657; 7,223,021; 7,218,587; 7,218,096;

7,213,250; 7,203,856; 7,193,580; 7,189,937; 7,187,537; 7,185,297;

7,184,278; 7,164,089; 7,161,541; 7,149,911; 7,148,418; 7,137,837;

7,133,279; 7,130,994; 7,125,282; 7,120,018; 7,111,953; 7,103,765;

7,100,087; 7,091,735; 7,088,592; 7,088,119; 7,086,887; 7,085,130;

7,078,882; 7,068,636; 7,066,751; 7,061,773; 7,047,598; 7,047,541;

7,043,741; 7,039,415; 7,035,946; 7,002,804; 6,980,159; 6,969,266;

6,946,861; 6,938,264; 6,933,927; 6,922,382; 6,873,064; 6,870,513;

6,843,407; 6,842,150; 6,827,589; 6,819,564; 6,817,510; 6,788,944;

6,783,373; 6,782,451; 6,775,208; 6,768,224; 6,760,293; 6,742,693;

6,732,903; 6,728,529; 6,724,352; 6,717,802; 6,717,074; 6,711,016;

6,694,442; 6,693,865; 6,687,248; 6,671,241; 6,657,548; 6,639,806;

6,622,571; 6,618,813; 6,612,850; 6,600,708; 6,561,852; 6,515,663;

6,509,754; 6,500,024; 6,491,359; 6,456,580; 6,456,492; 6,449,224;

6,449,144; 6,430,060; 6,415,389; 6,412,036; 6,407,930; 6,396,419;

6,396,409; 6,377,033; 6,339,340; 6,330,996; 6,310,779; 6,305,596;

6,301,778; 6,253,284; 6,226,741; 6,147,467; 6,095,409; 6,094,367;

6,085,331; 6,041,346; 5,963,017;

U.S. Patent Design D563,594; D557,695; D545,803; D542,256;

D538,276; D534,889; D518,041; D510,325; D510,324; D509,194;

Patents Pending.



A-35

Copyright Information

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of

ASUSTeK COMPUTER INC. (“ASUS”).

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO

THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,

ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS,

LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL

OR PRODUCT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL

ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT

TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT

BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES

THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Copyright © 2009 ASUSTeK COMPUTER INC. All Rights Reserved.

A-36



Limitation of Liability

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS.

In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.

ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty

Statement.

This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF

THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR

DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA;

OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY

ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS

OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS

INFORMED OF THEIR POSSIBILITY.

Service and Support

Visit our multi-language web site at

http://support.asus.com



A-37

Manufacturer

Address, City

Country

Authorized Representative in Europe

Address, City

Country

ASUSTek COMPUTER INC.

No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C

TAIWAN

ASUS COMPUTER GmbH

HARKORT STR. 21-23, 40880 RATINGEN

GERMANY

A-38



No results