American Standard Cadet 3 Powerwash Tall Height 10 in. Rough 2-Piece 1.6 GPF Single Flush Round Toilet in White, Seat Not Included Instructions / Assembly

BARRIER FREE

CADET ® 3 RIGHT HEIGHT ®

ROUND FRONT TOILET 10" ROUGH-IN

❑ 270BB.001

• Features the Cadet ® Flushing System

• Vitreous china

• Low consumption (6.0 Lpf/1.6 gpf)toilet

• PowerWash ® rim scrubs bowl with each flush

• Includes color match bowl caps

• EverClean ® surface included

• 3" flush valve

• 2-1/8" trapway

• 16-1/2" rim height for accessible applications

• 10" (254mm) rough-in

• Generous 9" x 8" water surface area

• Chrome finish trip lever is supplied

• 1,000g MaP Score** at 1.6 gpf

• 5 year warranty

CADET

®

3 RIGHT HEIGHT

®

ROUND FRONT TOILET 10" ROUGH-IN

VITREOUS CHINA

❑ 3717B.001 Right Height ® Round Front Bowl

❑ 4019.001N Tank

Nominal Dimensions:

717 x 439 x 770mm (28-1/4" x 17-1/4" x 30-1/4")

Fixture only, seat and supply sold separately

FINISHED WALL

30 ± 6mm

(1-1/8" ± 1/4")

190mm

(7-1/2")

667mm

(26-1/4")

439mm

(17-1/4")

Compliance Certifications -

Meets or Exceeds the Following Specifications:

• ASME A112.19.2-2008/CSA B45.1-08 for Vitreous

China Fixtures

92mm (3-5/8")

419mm

(16-1/2")

C/L OF SEAT POST HOLES

140mm (5-1/2" CENTERS)

419mm

(16-1/2")

SUPPLY

AS

REQ'D.

*203mm

(8")

356mm

(14")

770mm

(30-1/4")

216mm

(8-1/2")

254mm

(10")

328mm

(13")

C/L OF OUTLET

FINISHED

FLOOR

237mm

(9-3/8")

*152mm

(6")

** Maximum Performance (MaP) testing performed by

IAPMO R&T Lab. MaP Report conducted by Veritec

Consulting, Inc. and Koeller and Company.

To Be Specified:

❏ Color: ❏ White ❏ Bone ❏ Linen

❏ Seat: #5320.110 EverClean ® Round Front Seat with

Slow Close Snap-Off Hinges

❏ Supply with stop:

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND

ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE

BUILDING FACILITIES-CHECK LOCAL CODES.

K212

© 2013 AS America Inc.

Rev. 8/13